scsi: hpsa: update check for logical volume status

 - Add in a new case for volume offline. Resolves internal testing bug
   for multilun array management.
 - Return correct status for failed TURs.

Reviewed-by: Scott Benesh <scott.benesh@microsemi.com>
Reviewed-by: Scott Teel <scott.teel@microsemi.com>
Signed-off-by: Don Brace <don.brace@microsemi.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

drivers/scsi/hpsa.c

@@ -3714,7 +3714,7 @@ exit_failed:
  *  # (integer code indicating one of several NOT READY states
  *     describing why a volume is to be kept offline)
  */
-static int hpsa_volume_offline(struct ctlr_info *h,
+static unsigned char hpsa_volume_offline(struct ctlr_info *h,
 					unsigned char scsi3addr[])
 {
 	struct CommandList *c;
@@ -3735,7 +3735,7 @@ static int hpsa_volume_offline(struct ctlr_info *h,
 					DEFAULT_TIMEOUT);
 	if (rc) {
 		cmd_free(h, c);
-		return 0;
+		return HPSA_VPD_LV_STATUS_UNSUPPORTED;
 	}
 	sense = c->err_info->SenseInfo;
 	if (c->err_info->SenseLen > sizeof(c->err_info->SenseInfo))
@@ -3746,19 +3746,13 @@ static int hpsa_volume_offline(struct ctlr_info *h,
 	cmd_status = c->err_info->CommandStatus;
 	scsi_status = c->err_info->ScsiStatus;
 	cmd_free(h, c);
-	/* Is the volume 'not ready'? */
-	if (cmd_status != CMD_TARGET_STATUS ||
-		scsi_status != SAM_STAT_CHECK_CONDITION ||
-		sense_key != NOT_READY ||
-		asc != ASC_LUN_NOT_READY)  {
-		return 0;
-	}
 
 	/* Determine the reason for not ready state */
 	ldstat = hpsa_get_volume_status(h, scsi3addr);
 
 	/* Keep volume offline in certain cases: */
 	switch (ldstat) {
+	case HPSA_LV_FAILED:
 	case HPSA_LV_UNDERGOING_ERASE:
 	case HPSA_LV_NOT_AVAILABLE:
 	case HPSA_LV_UNDERGOING_RPI:
@@ -3780,7 +3774,7 @@ static int hpsa_volume_offline(struct ctlr_info *h,
 	default:
 		break;
 	}
-	return 0;
+	return HPSA_LV_OK;
 }
 
 /*
@@ -3853,10 +3847,10 @@ static int hpsa_update_device_info(struct ctlr_info *h,
 	/* Do an inquiry to the device to see what it is. */
 	if (hpsa_scsi_do_inquiry(h, scsi3addr, 0, inq_buff,
 		(unsigned char) OBDR_TAPE_INQ_SIZE) != 0) {
-		/* Inquiry failed (msg printed already) */
 		dev_err(&h->pdev->dev,
-			"hpsa_update_device_info: inquiry failed\n");
-		rc = -EIO;
+			"%s: inquiry failed, device will be skipped.\n",
+			__func__);
+		rc = HPSA_INQUIRY_FAILED;
 		goto bail_out;
 	}
 
@@ -3885,15 +3879,19 @@ static int hpsa_update_device_info(struct ctlr_info *h,
 	if ((this_device->devtype == TYPE_DISK ||
 		this_device->devtype == TYPE_ZBC) &&
 		is_logical_dev_addr_mode(scsi3addr)) {
-		int volume_offline;
+		unsigned char volume_offline;
 
 		hpsa_get_raid_level(h, scsi3addr, &this_device->raid_level);
 		if (h->fw_support & MISC_FW_RAID_OFFLOAD_BASIC)
 			hpsa_get_ioaccel_status(h, scsi3addr, this_device);
 		volume_offline = hpsa_volume_offline(h, scsi3addr);
-		if (volume_offline < 0 || volume_offline > 0xff)
-			volume_offline = HPSA_VPD_LV_STATUS_UNSUPPORTED;
-		this_device->volume_offline = volume_offline & 0xff;
+		if (volume_offline == HPSA_LV_FAILED) {
+			rc = HPSA_LV_FAILED;
+			dev_err(&h->pdev->dev,
+				"%s: LV failed, device will be skipped.\n",
+				__func__);
+			goto bail_out;
+		}
 	} else {
 		this_device->raid_level = RAID_UNKNOWN;
 		this_device->offload_config = 0;
@@ -4379,8 +4377,7 @@ static void hpsa_update_scsi_devices(struct ctlr_info *h)
 			goto out;
 		}
 		if (rc) {
-			dev_warn(&h->pdev->dev,
-				"Inquiry failed, skipping device.\n");
+			h->drv_req_rescan = 1;
 			continue;
 		}
 

drivers/scsi/hpsa_cmd.h

@@ -156,6 +156,7 @@
 #define CFGTBL_BusType_Fibre2G  0x00000200l
 
 /* VPD Inquiry types */
+#define HPSA_INQUIRY_FAILED		0x02
 #define HPSA_VPD_SUPPORTED_PAGES        0x00
 #define HPSA_VPD_LV_DEVICE_ID           0x83
 #define HPSA_VPD_LV_DEVICE_GEOMETRY     0xC1
@@ -166,6 +167,7 @@
 /* Logical volume states */
 #define HPSA_VPD_LV_STATUS_UNSUPPORTED			0xff
 #define HPSA_LV_OK                                      0x0
+#define HPSA_LV_FAILED					0x01
 #define HPSA_LV_NOT_AVAILABLE				0x0b
 #define HPSA_LV_UNDERGOING_ERASE			0x0F
 #define HPSA_LV_UNDERGOING_RPI				0x12