dgnc: get rid of dpacompat.h, move remaining stuff to digi.h

Dpacompat.h contained a lot of unused #defines and only few things are
used from it so since we've trimmed down digi.h, now we can delete
dpacompat.h and move remaining stuff into digi.h.

Signed-off-by: Giedrius Statkevičius <giedrius.statkevicius@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drivers/staging/dgnc/dgnc_driver.c

@@ -21,7 +21,6 @@
 #include <linux/sched.h>
 #include "dgnc_driver.h"
 #include "dgnc_pci.h"
-#include "dpacompat.h"
 #include "dgnc_mgmt.h"
 #include "dgnc_tty.h"
 #include "dgnc_cls.h"

drivers/staging/dgnc/dgnc_mgmt.c

@@ -32,7 +32,6 @@
 #include "dgnc_pci.h"
 #include "dgnc_kcompat.h"	/* Kernel 2.4/2.6 compat includes */
 #include "dgnc_mgmt.h"
-#include "dpacompat.h"
 
 
 /* Our "in use" variables, to enforce 1 open only */

drivers/staging/dgnc/dgnc_tty.c

@@ -39,7 +39,6 @@
 #include "dgnc_types.h"
 #include "dgnc_neo.h"
 #include "dgnc_cls.h"
-#include "dpacompat.h"
 #include "dgnc_sysfs.h"
 #include "dgnc_utils.h"
 

drivers/staging/dgnc/digi.h

@@ -44,6 +44,11 @@
 #define DIGI_SETA	(('e'<<8) | 95)		/* Set params		*/
 #define DIGI_SETAW	(('e'<<8) | 96)		/* Drain & set params	*/
 #define DIGI_SETAF	(('e'<<8) | 97)		/* Drain, flush & set params */
+#define DIGI_GET_NI_INFO (('d'<<8) | 250) /* Non-intelligent state info */
+#define DIGI_LOOPBACK (('d'<<8) | 252) /*
+					* Enable/disable UART
+					* internal loopback
+					*/
 #define DIGI_FAST	0x0002		/* Fast baud rates		*/
 #define RTSPACE		0x0004		/* RTS input flow control	*/
 #define CTSPACE		0x0008		/* CTS output flow control	*/
@@ -139,4 +144,35 @@ struct digi_getcounter {
 #define EV_IPS		0x0020		/* !<Input paused by high/low water marks */
 #define EV_TXB		0x0040		/* !<Transmit break pending */
 
+/*
+ * This structure holds data needed for the intelligent <--> nonintelligent
+ * DPA translation
+ */
+struct ni_info {
+	int board;
+	int channel;
+	int dtr;
+	int rts;
+	int cts;
+	int dsr;
+	int ri;
+	int dcd;
+	int curtx;
+	int currx;
+	unsigned short iflag;
+	unsigned short oflag;
+	unsigned short cflag;
+	unsigned short lflag;
+	unsigned int mstat;
+	unsigned char hflow;
+	unsigned char xmit_stopped;
+	unsigned char recv_stopped;
+	unsigned int baud;
+};
+
+#define T_CLASSIC 0002
+#define T_PCIBUS 0400
+#define T_NEO_EXPRESS 0001
+#define T_NEO 0000
+
 #endif /* DIGI_H */

drivers/staging/dgnc/dpacompat.h

@@ -1,109 +0,0 @@
-/*
- * Copyright 2003 Digi International (www.digi.com)
- *      Scott H Kilau <Scott_Kilau at digi dot com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2, or (at your option)
- * any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY, EXPRESS OR IMPLIED; without even the
- * implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR
- * PURPOSE.  See the GNU General Public License for more details.
- */
-
-
-/*
- * This structure holds data needed for the intelligent <--> nonintelligent
- * DPA translation
- */
-struct ni_info {
-	int board;
-	int channel;
-	int dtr;
-	int rts;
-	int cts;
-	int dsr;
-	int ri;
-	int dcd;
-	int curtx;
-	int currx;
-	unsigned short iflag;
-	unsigned short oflag;
-	unsigned short cflag;
-	unsigned short lflag;
-
-	unsigned int mstat;
-	unsigned char hflow;
-
-	unsigned char xmit_stopped;
-	unsigned char recv_stopped;
-
-	unsigned int baud;
-};
-
-#define RW_READ		1
-#define RW_WRITE        2
-#define DIGI_KME        (('e'<<8) | 98)         /* Read/Write Host */
-
-#define SUBTYPE         0007
-#define T_PCXI          0000
-#define T_PCXEM         0001
-#define T_PCXE          0002
-#define T_PCXR          0003
-#define T_SP            0004
-#define T_SP_PLUS       0005
-
-#define T_HERC   0000
-#define T_HOU    0001
-#define T_LON    0002
-#define T_CHA    0003
-
-#define T_NEO	 0000
-#define T_NEO_EXPRESS  0001
-#define T_CLASSIC 0002
-
-#define FAMILY          0070
-#define T_COMXI         0000
-#define	T_NI		0000
-#define T_PCXX          0010
-#define T_CX            0020
-#define T_EPC           0030
-#define T_PCLITE        0040
-#define T_SPXX          0050
-#define T_AVXX          0060
-#define T_DXB           0070
-#define T_A2K_4_8       0070
-
-#define BUSTYPE         0700
-#define T_ISABUS        0000
-#define T_MCBUS         0100
-#define T_EISABUS       0200
-#define T_PCIBUS        0400
-
-/* Board State Definitions */
-
-#define BD_RUNNING      0x0
-#define BD_REASON       0x7f
-#define BD_NOTFOUND     0x1
-#define BD_NOIOPORT     0x2
-#define BD_NOMEM        0x3
-#define BD_NOBIOS       0x4
-#define BD_NOFEP        0x5
-#define BD_FAILED       0x6
-#define BD_ALLOCATED    0x7
-#define BD_TRIBOOT      0x8
-#define BD_BADKME       0x80
-
-#define DIGI_AIXON      0x0400          /* Aux flow control in fep */
-
-/* Ioctls needed for dpa operation */
-
-#define DIGI_GETDD      (('d'<<8) | 248)       /* get driver info      */
-#define DIGI_GETBD      (('d'<<8) | 249)       /* get board info       */
-#define DIGI_GET_NI_INFO (('d'<<8) | 250)	/* nonintelligent state snfo */
-
-/* Other special ioctls */
-#define DIGI_TIMERIRQ (('d'<<8) | 251)		/* Enable/disable RS_TIMER use */
-#define DIGI_LOOPBACK (('d'<<8) | 252)		/* Enable/disable UART internal loopback */