MIPS: CPS: Use change_*, set_* & clear_* where appropriate

Make use of the new change_*, set_* & clear_* accessor functions for CPS
(CM, CPC & GIC) registers where doing so makes the code easier to read
or shortens it without adversely affecting readability.

Signed-off-by: Paul Burton <paul.burton@imgtec.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/17005/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

arch/mips/kernel/mips-cm.c

@@ -233,9 +233,7 @@ int mips_cm_probe(void)
 	}
 
 	/* set default target to memory */
-	base_reg &= ~CM_GCR_BASE_CMDEFTGT;
-	base_reg |= CM_GCR_BASE_CMDEFTGT_MEM;
-	write_gcr_base(base_reg);
+	change_gcr_base(CM_GCR_BASE_CMDEFTGT, CM_GCR_BASE_CMDEFTGT_MEM);
 
 	/* disable CM regions */
 	write_gcr_reg0_base(CM_GCR_REGn_BASE_BASEADDR);

arch/mips/kernel/smp-cps.c

@@ -212,7 +212,7 @@ err_out:
 
 static void boot_core(unsigned int core, unsigned int vpe_id)
 {
-	u32 access, stat, seq_state;
+	u32 stat, seq_state;
 	unsigned timeout;
 
 	/* Select the appropriate core */
@@ -228,9 +228,7 @@ static void boot_core(unsigned int core, unsigned int vpe_id)
 	write_gcr_co_reset_ext_base(CM_GCR_Cx_RESET_EXT_BASE_UEB);
 
 	/* Ensure the core can access the GCRs */
-	access = read_gcr_access();
-	access |= 1 << core;
-	write_gcr_access(access);
+	set_gcr_access(1 << core);
 
 	if (mips_cpc_present()) {
 		/* Reset the core */

arch/mips/mm/sc-mips.c

@@ -69,28 +69,19 @@ static void mips_sc_prefetch_enable(void)
 		pftctl |= CM_GCR_L2_PFT_CONTROL_PFTEN;
 		write_gcr_l2_pft_control(pftctl);
 
-		pftctl = read_gcr_l2_pft_control_b();
-		pftctl |= CM_GCR_L2_PFT_CONTROL_B_PORTID;
-		pftctl |= CM_GCR_L2_PFT_CONTROL_B_CEN;
-		write_gcr_l2_pft_control_b(pftctl);
+		set_gcr_l2_pft_control_b(CM_GCR_L2_PFT_CONTROL_B_PORTID |
+					 CM_GCR_L2_PFT_CONTROL_B_CEN);
 	}
 }
 
 static void mips_sc_prefetch_disable(void)
 {
-	unsigned long pftctl;
-
 	if (mips_cm_revision() < CM_REV_CM2_5)
 		return;
 
-	pftctl = read_gcr_l2_pft_control();
-	pftctl &= ~CM_GCR_L2_PFT_CONTROL_PFTEN;
-	write_gcr_l2_pft_control(pftctl);
-
-	pftctl = read_gcr_l2_pft_control_b();
-	pftctl &= ~CM_GCR_L2_PFT_CONTROL_B_PORTID;
-	pftctl &= ~CM_GCR_L2_PFT_CONTROL_B_CEN;
-	write_gcr_l2_pft_control_b(pftctl);
+	clear_gcr_l2_pft_control(CM_GCR_L2_PFT_CONTROL_PFTEN);
+	clear_gcr_l2_pft_control_b(CM_GCR_L2_PFT_CONTROL_B_PORTID |
+				   CM_GCR_L2_PFT_CONTROL_B_CEN);
 }
 
 static bool mips_sc_prefetch_is_enabled(void)