Merge branch 'v3.15-next/cleanup-samsung-2' into v3.15-next/s2r-pm-samsung-2

arch/arm/Kconfig.debug

@@ -1145,7 +1145,7 @@ config DEBUG_UART_8250_FLOW_CONTROL
 
 config DEBUG_UNCOMPRESS
 	bool
-	depends on ARCH_MULTIPLATFORM || ARCH_MSM
+	depends on ARCH_MULTIPLATFORM || ARCH_MSM || PLAT_SAMSUNG
 	default y if DEBUG_LL && !DEBUG_OMAP2PLUS_UART && \
 		     (!DEBUG_TEGRA_UART || !ZBOOT_ROM)
 	help
@@ -1161,7 +1161,8 @@ config DEBUG_UNCOMPRESS
 
 config UNCOMPRESS_INCLUDE
 	string
-	default "debug/uncompress.h" if ARCH_MULTIPLATFORM || ARCH_MSM
+	default "debug/uncompress.h" if ARCH_MULTIPLATFORM || ARCH_MSM || \
+					PLAT_SAMSUNG
 	default "mach/uncompress.h"
 
 config EARLY_PRINTK

arch/arm/include/debug/samsung.S

@@ -9,7 +9,7 @@
  * published by the Free Software Foundation.
 */
 
-#include <plat/regs-serial.h>
+#include <linux/serial_s3c.h>
 
 /* The S5PV210/S5PC110 implementations are as belows. */
 

arch/arm/mach-exynos/common.c

@@ -20,6 +20,7 @@
 #include <clocksource/samsung_pwm.h>
 #include <linux/sched.h>
 #include <linux/serial_core.h>
+#include <linux/serial_s3c.h>
 #include <linux/of.h>
 #include <linux/of_fdt.h>
 #include <linux/of_irq.h>
@@ -40,7 +41,6 @@
 
 #include <plat/cpu.h>
 #include <plat/pm.h>
-#include <plat/regs-serial.h>
 
 #include "common.h"
 #include "regs-pmu.h"

arch/arm/mach-exynos/include/mach/uncompress.h

@@ -1,48 +0,0 @@
-/*
- * Copyright (c) 2010-2012 Samsung Electronics Co., Ltd.
- *		http://www.samsung.com
- *
- * EXYNOS - uncompress code
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __ASM_ARCH_UNCOMPRESS_H
-#define __ASM_ARCH_UNCOMPRESS_H __FILE__
-
-#include <asm/mach-types.h>
-
-#include <mach/map.h>
-#include <plat/uncompress.h>
-
-static unsigned int __raw_readl(unsigned int ptr)
-{
-	return *((volatile unsigned int *)ptr);
-}
-
-static void arch_detect_cpu(void)
-{
-	u32 chip_id = __raw_readl(EXYNOS_PA_CHIPID);
-
-	/*
-	 * product_id is bits 31:12
-	 * bits 23:20 describe the exynosX family
-	 * bits 27:24 describe the exynosX family in exynos5420
-	 */
-	chip_id >>= 20;
-
-	if ((chip_id & 0x0f) == 0x5 || (chip_id & 0xf0) == 0x50)
-		uart_base = (volatile u8 *)EXYNOS5_PA_UART + (S3C_UART_OFFSET * CONFIG_S3C_LOWLEVEL_UART_PORT);
-	else
-		uart_base = (volatile u8 *)EXYNOS4_PA_UART + (S3C_UART_OFFSET * CONFIG_S3C_LOWLEVEL_UART_PORT);
-
-	/*
-	 * For preventing FIFO overrun or infinite loop of UART console,
-	 * fifo_max should be the minimum fifo size of all of the UART channels
-	 */
-	fifo_mask = S5PV210_UFSTAT_TXMASK;
-	fifo_max = 15 << S5PV210_UFSTAT_TXSHIFT;
-}
-#endif /* __ASM_ARCH_UNCOMPRESS_H */

arch/arm/mach-exynos/pm_domains.c

@@ -22,8 +22,6 @@
 #include <linux/of_platform.h>
 #include <linux/sched.h>
 
-#include <plat/devs.h>
-
 #include "regs-pmu.h"
 
 /*

arch/arm/mach-s3c24xx/Kconfig

@@ -521,7 +521,6 @@ config MACH_ANUBIS
 	select HAVE_PATA_PLATFORM
 	select S3C2440_XTAL_12000000
 	select S3C24XX_DCLK
-	select S3C24XX_GPIO_EXTRA64
 	select S3C24XX_SIMTEC_PM if PM
 	select S3C_DEV_USB_HOST
 	help
@@ -562,7 +561,6 @@ config MACH_OSIRIS
 	select S3C2410_IOTIMING if ARM_S3C2440_CPUFREQ
 	select S3C2440_XTAL_12000000
 	select S3C24XX_DCLK
-	select S3C24XX_GPIO_EXTRA128
 	select S3C24XX_SIMTEC_PM if PM
 	select S3C_DEV_NAND
 	select S3C_DEV_USB_HOST

arch/arm/mach-s3c24xx/clock-s3c2410.c

@@ -30,13 +30,12 @@
 #include <linux/mutex.h>
 #include <linux/delay.h>
 #include <linux/serial_core.h>
+#include <linux/serial_s3c.h>
 #include <linux/io.h>
 
 #include <asm/mach/map.h>
 
 #include <mach/hardware.h>
-
-#include <plat/regs-serial.h>
 #include <mach/regs-clock.h>
 #include <mach/regs-gpio.h>
 

arch/arm/mach-s3c24xx/clock-s3c2412.c

@@ -31,13 +31,12 @@
 #include <linux/mutex.h>
 #include <linux/delay.h>
 #include <linux/serial_core.h>
+#include <linux/serial_s3c.h>
 #include <linux/io.h>
 
 #include <asm/mach/map.h>
 
 #include <mach/hardware.h>
-
-#include <plat/regs-serial.h>
 #include <mach/regs-clock.h>
 #include <mach/regs-gpio.h>
 

arch/arm/mach-s3c24xx/clock-s3c2440.c

@@ -34,6 +34,7 @@
 #include <linux/clk.h>
 #include <linux/io.h>
 #include <linux/serial_core.h>
+#include <linux/serial_s3c.h>
 
 #include <mach/hardware.h>
 #include <linux/atomic.h>
@@ -43,7 +44,6 @@
 
 #include <plat/clock.h>
 #include <plat/cpu.h>
-#include <plat/regs-serial.h>
 
 /* S3C2440 extended clock support */
 

arch/arm/mach-s3c24xx/common.c

@@ -27,6 +27,7 @@
 #include <linux/interrupt.h>
 #include <linux/ioport.h>
 #include <linux/serial_core.h>
+#include <linux/serial_s3c.h>
 #include <clocksource/samsung_pwm.h>
 #include <linux/platform_device.h>
 #include <linux/delay.h>
@@ -44,7 +45,6 @@
 #include <asm/mach/map.h>
 
 #include <mach/regs-gpio.h>
-#include <plat/regs-serial.h>
 #include <mach/dma.h>
 
 #include <plat/cpu.h>
@@ -240,7 +240,6 @@ void __init s3c24xx_init_io(struct map_desc *mach_desc, int size)
 	} else {
 		samsung_cpu_id = s3c24xx_read_idcode_v4();
 	}
-	s3c24xx_init_cpu();
 
 	s3c_init_cpu(samsung_cpu_id, cpu_ids, ARRAY_SIZE(cpu_ids));
 

arch/arm/mach-s3c24xx/dma-s3c2410.c

@@ -16,6 +16,7 @@
 #include <linux/init.h>
 #include <linux/device.h>
 #include <linux/serial_core.h>
+#include <linux/serial_s3c.h>
 
 #include <mach/map.h>
 #include <mach/dma.h>
@@ -23,7 +24,6 @@
 #include <plat/cpu.h>
 #include <plat/dma-s3c24xx.h>
 
-#include <plat/regs-serial.h>
 #include <mach/regs-gpio.h>
 #include <plat/regs-dma.h>
 #include <mach/regs-lcd.h>

arch/arm/mach-s3c24xx/dma-s3c2412.c

@@ -16,6 +16,7 @@
 #include <linux/init.h>
 #include <linux/device.h>
 #include <linux/serial_core.h>
+#include <linux/serial_s3c.h>
 #include <linux/io.h>
 
 #include <mach/dma.h>
@@ -23,7 +24,6 @@
 #include <plat/dma-s3c24xx.h>
 #include <plat/cpu.h>
 
-#include <plat/regs-serial.h>
 #include <mach/regs-gpio.h>
 #include <plat/regs-dma.h>
 #include <mach/regs-lcd.h>

arch/arm/mach-s3c24xx/dma-s3c2440.c

@@ -16,6 +16,7 @@
 #include <linux/init.h>
 #include <linux/device.h>
 #include <linux/serial_core.h>
+#include <linux/serial_s3c.h>
 
 #include <mach/map.h>
 #include <mach/dma.h>
@@ -23,7 +24,6 @@
 #include <plat/dma-s3c24xx.h>
 #include <plat/cpu.h>
 
-#include <plat/regs-serial.h>
 #include <mach/regs-gpio.h>
 #include <plat/regs-dma.h>
 #include <mach/regs-lcd.h>

arch/arm/mach-s3c24xx/dma-s3c2443.c

@@ -16,6 +16,7 @@
 #include <linux/init.h>
 #include <linux/device.h>
 #include <linux/serial_core.h>
+#include <linux/serial_s3c.h>
 #include <linux/io.h>
 
 #include <mach/dma.h>
@@ -23,7 +24,6 @@
 #include <plat/dma-s3c24xx.h>
 #include <plat/cpu.h>
 
-#include <plat/regs-serial.h>
 #include <mach/regs-gpio.h>
 #include <plat/regs-dma.h>
 #include <mach/regs-lcd.h>

arch/arm/mach-s3c24xx/include/mach/debug-macro.S

@@ -14,7 +14,7 @@
 
 #include <mach/map.h>
 #include <mach/regs-gpio.h>
-#include <plat/regs-serial.h>
+#include <linux/serial_s3c.h>
 
 #define S3C2410_UART1_OFF (0x4000)
 #define SHIFT_2440TXF (14-9)

arch/arm/plat-samsung/include/plat/rtc-core.h → arch/arm/mach-s3c24xx/include/mach/rtc-core.h

@@ -1,5 +1,4 @@
-/* linux/arch/arm/plat-samsung/include/plat/rtc-core.h
- *
+/*
  * Copyright (c) 2011 Heiko Stuebner <heiko@sntech.de>
  *
  * Samsung RTC Controller core functions
@@ -9,19 +8,19 @@
  * published by the Free Software Foundation.
 */
 
-#ifndef __ASM_PLAT_RTC_CORE_H
-#define __ASM_PLAT_RTC_CORE_H __FILE__
+#ifndef __RTC_CORE_H
+#define __RTC_CORE_H __FILE__
 
 /* These functions are only for use with the core support code, such as
  * the cpu specific initialisation code
  */
 
+extern struct platform_device s3c_device_rtc;
+
 /* re-define device name depending on support. */
 static inline void s3c_rtc_setname(char *name)
 {
-#if defined(CONFIG_S3C_DEV_RTC) || defined(CONFIG_PLAT_S3C24XX)
 	s3c_device_rtc.name = name;
-#endif
 }
 
-#endif /* __ASM_PLAT_RTC_CORE_H */
+#endif /* __RTC_CORE_H */

arch/arm/mach-s3c24xx/include/mach/tick.h

@@ -1,15 +0,0 @@
-/* linux/arch/arm/mach-s3c2410/include/mach/tick.h
- *
- * Copyright 2008 Simtec Electronics
- *      Ben Dooks <ben@simtec.co.uk>
- *      http://armlinux.simtec.co.uk/
- *
- * S3C2410 - timer tick support
- */
-
-#define SRCPND_TIMER4 (1<<(IRQ_TIMER4 - IRQ_EINT0))
-
-static inline int s3c24xx_ostimer_pending(void)
-{
-	return __raw_readl(S3C2410_SRCPND) & SRCPND_TIMER4;
-}

arch/arm/mach-s3c24xx/include/mach/uncompress.h

@@ -1,57 +0,0 @@
-/* arch/arm/mach-s3c2410/include/mach/uncompress.h
- *
- * Copyright (c) 2003-2007 Simtec Electronics
- *	http://armlinux.simtec.co.uk/
- *	Ben Dooks <ben@simtec.co.uk>
- *
- * S3C2410 - uncompress code
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __ASM_ARCH_UNCOMPRESS_H
-#define __ASM_ARCH_UNCOMPRESS_H
-
-#include <mach/regs-gpio.h>
-#include <mach/map.h>
-
-/* working in physical space... */
-#undef S3C2410_GPIOREG
-#define S3C2410_GPIOREG(x) ((S3C24XX_PA_GPIO + (x)))
-
-#include <plat/uncompress.h>
-
-static inline int is_arm926(void)
-{
-	unsigned int cpuid;
-
-	asm volatile ("mrc p15, 0, %0, c1, c0, 0" : "=r" (cpuid));
-
-	return ((cpuid & 0xff0) == 0x260);
-}
-
-static void arch_detect_cpu(void)
-{
-	unsigned int cpuid;
-
-	cpuid = *((volatile unsigned int *)S3C2410_GSTATUS1);
-	cpuid &= S3C2410_GSTATUS1_IDMASK;
-
-	if (is_arm926() || cpuid == S3C2410_GSTATUS1_2440 ||
-	    cpuid == S3C2410_GSTATUS1_2442 ||
-	    cpuid == S3C2410_GSTATUS1_2416 ||
-	    cpuid == S3C2410_GSTATUS1_2450) {
-		fifo_mask = S3C2440_UFSTAT_TXMASK;
-		fifo_max = 63 << S3C2440_UFSTAT_TXSHIFT;
-	} else {
-		fifo_mask = S3C2410_UFSTAT_TXMASK;
-		fifo_max = 15 << S3C2410_UFSTAT_TXSHIFT;
-	}
-
-	uart_base = (volatile u8 *) S3C_PA_UART +
-		(S3C_UART_OFFSET * CONFIG_S3C_LOWLEVEL_UART_PORT);
-}
-
-#endif /* __ASM_ARCH_UNCOMPRESS_H */

arch/arm/mach-s3c24xx/mach-amlm5900.c

@@ -37,6 +37,7 @@
 #include <linux/platform_device.h>
 #include <linux/proc_fs.h>
 #include <linux/serial_core.h>
+#include <linux/serial_s3c.h>
 #include <linux/io.h>
 
 #include <asm/mach/arch.h>
@@ -49,7 +50,6 @@
 #include <asm/mach-types.h>
 #include <mach/fb.h>
 
-#include <plat/regs-serial.h>
 #include <mach/regs-lcd.h>
 #include <mach/regs-gpio.h>
 #include <mach/gpio-samsung.h>

arch/arm/mach-s3c24xx/mach-anubis.c

@@ -17,6 +17,7 @@
 #include <linux/init.h>
 #include <linux/gpio.h>
 #include <linux/serial_core.h>
+#include <linux/serial_s3c.h>
 #include <linux/platform_device.h>
 #include <linux/ata_platform.h>
 #include <linux/i2c.h>
@@ -32,7 +33,6 @@
 #include <asm/irq.h>
 #include <asm/mach-types.h>
 
-#include <plat/regs-serial.h>
 #include <mach/regs-gpio.h>
 #include <mach/regs-lcd.h>
 #include <mach/gpio-samsung.h>

arch/arm/mach-s3c24xx/mach-at2440evb.c

@@ -21,6 +21,7 @@
 #include <linux/init.h>
 #include <linux/io.h>
 #include <linux/serial_core.h>
+#include <linux/serial_s3c.h>
 #include <linux/dm9000.h>
 #include <linux/platform_device.h>
 
@@ -33,7 +34,6 @@
 #include <asm/irq.h>
 #include <asm/mach-types.h>
 
-#include <plat/regs-serial.h>
 #include <mach/regs-gpio.h>
 #include <mach/regs-lcd.h>
 #include <mach/gpio-samsung.h>

arch/arm/mach-s3c24xx/mach-bast.c

@@ -19,6 +19,7 @@
 #include <linux/gpio.h>
 #include <linux/syscore_ops.h>
 #include <linux/serial_core.h>
+#include <linux/serial_s3c.h>
 #include <linux/platform_device.h>
 #include <linux/dm9000.h>
 #include <linux/ata_platform.h>
@@ -55,7 +56,6 @@
 #include <plat/cpu-freq.h>
 #include <plat/devs.h>
 #include <plat/gpio-cfg.h>
-#include <plat/regs-serial.h>
 #include <plat/samsung-time.h>
 
 #include "bast.h"

arch/arm/mach-s3c24xx/mach-gta02.c

@@ -35,6 +35,7 @@
 #include <linux/workqueue.h>
 #include <linux/platform_device.h>
 #include <linux/serial_core.h>
+#include <linux/serial_s3c.h>
 #include <linux/input.h>
 #include <linux/io.h>
 #include <linux/i2c.h>
@@ -81,7 +82,6 @@
 #include <plat/devs.h>
 #include <plat/gpio-cfg.h>
 #include <plat/pm.h>
-#include <plat/regs-serial.h>
 #include <plat/samsung-time.h>
 
 #include "common.h"

arch/arm/mach-s3c24xx/mach-h1940.c

@@ -19,6 +19,7 @@
 #include <linux/init.h>
 #include <linux/device.h>
 #include <linux/serial_core.h>
+#include <linux/serial_s3c.h>
 #include <linux/platform_device.h>
 #include <linux/io.h>
 #include <linux/gpio.h>
@@ -62,7 +63,6 @@
 #include <plat/gpio-cfg.h>
 #include <plat/pll.h>
 #include <plat/pm.h>
-#include <plat/regs-serial.h>
 #include <plat/samsung-time.h>
 
 #include "common.h"

arch/arm/mach-s3c24xx/mach-jive.c

@@ -19,6 +19,7 @@
 #include <linux/gpio.h>
 #include <linux/syscore_ops.h>
 #include <linux/serial_core.h>
+#include <linux/serial_s3c.h>
 #include <linux/platform_device.h>
 #include <linux/i2c.h>
 
@@ -31,7 +32,6 @@
 #include <asm/mach/map.h>
 #include <asm/mach/irq.h>
 
-#include <plat/regs-serial.h>
 #include <linux/platform_data/mtd-nand-s3c2410.h>
 #include <linux/platform_data/i2c-s3c2410.h>
 

arch/arm/mach-s3c24xx/mach-mini2440.c

@@ -23,6 +23,7 @@
 #include <linux/input.h>
 #include <linux/io.h>
 #include <linux/serial_core.h>
+#include <linux/serial_s3c.h>
 #include <linux/dm9000.h>
 #include <linux/platform_data/at24.h>
 #include <linux/platform_device.h>
@@ -37,7 +38,6 @@
 #include <mach/fb.h>
 #include <asm/mach-types.h>
 
-#include <plat/regs-serial.h>
 #include <mach/regs-gpio.h>
 #include <linux/platform_data/leds-s3c24xx.h>
 #include <mach/regs-lcd.h>

arch/arm/mach-s3c24xx/mach-n30.c

@@ -24,6 +24,7 @@
 #include <linux/interrupt.h>
 #include <linux/platform_device.h>
 #include <linux/serial_core.h>
+#include <linux/serial_s3c.h>
 #include <linux/timer.h>
 #include <linux/io.h>
 #include <linux/mmc/host.h>
@@ -43,7 +44,6 @@
 #include <asm/mach/map.h>
 
 #include <linux/platform_data/i2c-s3c2410.h>
-#include <plat/regs-serial.h>
 
 #include <plat/clock.h>
 #include <plat/cpu.h>

arch/arm/mach-s3c24xx/mach-nexcoder.c

@@ -21,6 +21,7 @@
 #include <linux/gpio.h>
 #include <linux/string.h>
 #include <linux/serial_core.h>
+#include <linux/serial_s3c.h>
 #include <linux/platform_device.h>
 #include <linux/io.h>
 
@@ -38,7 +39,6 @@
 //#include <asm/debug-ll.h>
 #include <mach/regs-gpio.h>
 #include <mach/gpio-samsung.h>
-#include <plat/regs-serial.h>
 #include <linux/platform_data/i2c-s3c2410.h>
 
 #include <plat/gpio-cfg.h>

arch/arm/mach-s3c24xx/mach-osiris.c

@@ -18,6 +18,7 @@
 #include <linux/device.h>
 #include <linux/syscore_ops.h>
 #include <linux/serial_core.h>
+#include <linux/serial_s3c.h>
 #include <linux/clk.h>
 #include <linux/i2c.h>
 #include <linux/io.h>
@@ -44,7 +45,6 @@
 #include <plat/cpu-freq.h>
 #include <plat/devs.h>
 #include <plat/gpio-cfg.h>
-#include <plat/regs-serial.h>
 #include <plat/samsung-time.h>
 
 #include <mach/hardware.h>

arch/arm/mach-s3c24xx/mach-otom.c

@@ -15,6 +15,7 @@
 #include <linux/timer.h>
 #include <linux/init.h>
 #include <linux/serial_core.h>
+#include <linux/serial_s3c.h>
 #include <linux/platform_device.h>
 #include <linux/io.h>
 
@@ -32,7 +33,6 @@
 #include <plat/clock.h>
 #include <plat/cpu.h>
 #include <plat/devs.h>
-#include <plat/regs-serial.h>
 #include <plat/samsung-time.h>
 
 #include "common.h"

arch/arm/mach-s3c24xx/mach-qt2410.c

@@ -31,6 +31,7 @@
 #include <linux/device.h>
 #include <linux/platform_device.h>
 #include <linux/serial_core.h>
+#include <linux/serial_s3c.h>
 #include <linux/spi/spi.h>
 #include <linux/spi/spi_gpio.h>
 #include <linux/io.h>
@@ -49,7 +50,6 @@
 
 #include <linux/platform_data/leds-s3c24xx.h>
 #include <mach/regs-lcd.h>
-#include <plat/regs-serial.h>
 #include <mach/fb.h>
 #include <linux/platform_data/mtd-nand-s3c2410.h>
 #include <linux/platform_data/usb-s3c2410_udc.h>

arch/arm/mach-s3c24xx/mach-rx1950.c

@@ -21,6 +21,7 @@
 #include <linux/gpio.h>
 #include <linux/platform_device.h>
 #include <linux/serial_core.h>
+#include <linux/serial_s3c.h>
 #include <linux/input.h>
 #include <linux/gpio_keys.h>
 #include <linux/device.h>
@@ -57,7 +58,6 @@
 #include <plat/cpu.h>
 #include <plat/devs.h>
 #include <plat/pm.h>
-#include <plat/regs-serial.h>
 #include <plat/samsung-time.h>
 #include <plat/gpio-cfg.h>
 

arch/arm/mach-s3c24xx/mach-rx3715.c

@@ -23,6 +23,7 @@
 #include <linux/device.h>
 #include <linux/platform_device.h>
 #include <linux/serial_core.h>
+#include <linux/serial_s3c.h>
 #include <linux/serial.h>
 #include <linux/io.h>
 #include <linux/mtd/mtd.h>
@@ -49,7 +50,6 @@
 #include <plat/cpu.h>
 #include <plat/devs.h>
 #include <plat/pm.h>
-#include <plat/regs-serial.h>
 #include <plat/samsung-time.h>
 
 #include "common.h"

arch/arm/mach-s3c24xx/mach-s3c2416-dt.c

@@ -19,13 +19,13 @@
 #include <linux/irqchip.h>
 #include <linux/of_platform.h>
 #include <linux/serial_core.h>
+#include <linux/serial_s3c.h>
 
 #include <asm/mach/arch.h>
 #include <mach/map.h>
 
 #include <plat/cpu.h>
 #include <plat/pm.h>
-#include <plat/regs-serial.h>
 
 #include "common.h"
 

arch/arm/mach-s3c24xx/mach-smdk2410.c

@@ -35,6 +35,7 @@
 #include <linux/timer.h>
 #include <linux/init.h>
 #include <linux/serial_core.h>
+#include <linux/serial_s3c.h>
 #include <linux/platform_device.h>
 #include <linux/io.h>
 
@@ -46,7 +47,6 @@
 #include <asm/irq.h>
 #include <asm/mach-types.h>
 
-#include <plat/regs-serial.h>
 #include <linux/platform_data/i2c-s3c2410.h>
 
 #include <plat/devs.h>

arch/arm/mach-s3c24xx/mach-smdk2413.c

@@ -19,6 +19,7 @@
 #include <linux/init.h>
 #include <linux/gpio.h>
 #include <linux/serial_core.h>
+#include <linux/serial_s3c.h>
 #include <linux/platform_device.h>
 #include <linux/io.h>
 
@@ -33,7 +34,6 @@
 #include <asm/mach-types.h>
 
 //#include <asm/debug-ll.h>
-#include <plat/regs-serial.h>
 #include <mach/regs-gpio.h>
 #include <mach/regs-lcd.h>
 

arch/arm/mach-s3c24xx/mach-smdk2416.c

@@ -18,6 +18,7 @@
 #include <linux/timer.h>
 #include <linux/init.h>
 #include <linux/serial_core.h>
+#include <linux/serial_s3c.h>
 #include <linux/platform_device.h>
 #include <linux/io.h>
 #include <linux/mtd/partitions.h>
@@ -34,7 +35,6 @@
 #include <asm/irq.h>
 #include <asm/mach-types.h>
 
-#include <plat/regs-serial.h>
 #include <mach/regs-gpio.h>
 #include <mach/regs-lcd.h>
 #include <mach/regs-s3c2443-clock.h>

arch/arm/mach-s3c24xx/mach-smdk2440.c

@@ -20,6 +20,7 @@
 #include <linux/timer.h>
 #include <linux/init.h>
 #include <linux/serial_core.h>
+#include <linux/serial_s3c.h>
 #include <linux/platform_device.h>
 #include <linux/io.h>
 
@@ -31,7 +32,6 @@
 #include <asm/irq.h>
 #include <asm/mach-types.h>
 
-#include <plat/regs-serial.h>
 #include <mach/regs-gpio.h>
 #include <mach/regs-lcd.h>
 

arch/arm/mach-s3c24xx/mach-smdk2443.c

@@ -20,6 +20,7 @@
 #include <linux/timer.h>
 #include <linux/init.h>
 #include <linux/serial_core.h>
+#include <linux/serial_s3c.h>
 #include <linux/platform_device.h>
 #include <linux/io.h>
 
@@ -31,7 +32,6 @@
 #include <asm/irq.h>
 #include <asm/mach-types.h>
 
-#include <plat/regs-serial.h>
 #include <mach/regs-gpio.h>
 #include <mach/regs-lcd.h>
 

arch/arm/mach-s3c24xx/mach-tct_hammer.c

@@ -33,6 +33,7 @@
 #include <linux/device.h>
 #include <linux/platform_device.h>
 #include <linux/serial_core.h>
+#include <linux/serial_s3c.h>
 #include <linux/io.h>
 
 #include <asm/mach/arch.h>
@@ -44,7 +45,6 @@
 #include <asm/irq.h>
 #include <asm/mach-types.h>
 
-#include <plat/regs-serial.h>
 #include <linux/platform_data/i2c-s3c2410.h>
 #include <plat/devs.h>
 #include <plat/cpu.h>

arch/arm/mach-s3c24xx/mach-vr1000.c

@@ -25,6 +25,7 @@
 #include <linux/tty.h>
 #include <linux/serial_8250.h>
 #include <linux/serial_reg.h>
+#include <linux/serial_s3c.h>
 #include <linux/io.h>
 
 #include <asm/mach/arch.h>
@@ -45,7 +46,6 @@
 #include <plat/clock.h>
 #include <plat/cpu.h>
 #include <plat/devs.h>
-#include <plat/regs-serial.h>
 #include <plat/samsung-time.h>
 
 #include "bast.h"

arch/arm/mach-s3c24xx/mach-vstms.c

@@ -16,6 +16,7 @@
 #include <linux/timer.h>
 #include <linux/init.h>
 #include <linux/serial_core.h>
+#include <linux/serial_s3c.h>
 #include <linux/platform_device.h>
 #include <linux/io.h>
 #include <linux/mtd/mtd.h>
@@ -32,7 +33,6 @@
 #include <asm/irq.h>
 #include <asm/mach-types.h>
 
-#include <plat/regs-serial.h>
 #include <mach/regs-gpio.h>
 #include <mach/regs-lcd.h>
 

arch/arm/mach-s3c24xx/pm.c

@@ -33,9 +33,9 @@
 #include <linux/gpio.h>
 #include <linux/interrupt.h>
 #include <linux/serial_core.h>
+#include <linux/serial_s3c.h>
 #include <linux/io.h>
 
-#include <plat/regs-serial.h>
 #include <mach/regs-clock.h>
 #include <mach/regs-gpio.h>
 #include <mach/regs-irq.h>

arch/arm/mach-s3c24xx/s3c2410.c

@@ -21,6 +21,7 @@
 #include <linux/device.h>
 #include <linux/syscore_ops.h>
 #include <linux/serial_core.h>
+#include <linux/serial_s3c.h>
 #include <linux/platform_device.h>
 #include <linux/reboot.h>
 #include <linux/io.h>
@@ -37,7 +38,6 @@
 #include <plat/cpu-freq.h>
 
 #include <mach/regs-clock.h>
-#include <plat/regs-serial.h>
 
 #include <plat/cpu.h>
 #include <plat/devs.h>

arch/arm/mach-s3c24xx/s3c2412.c

@@ -20,6 +20,7 @@
 #include <linux/device.h>
 #include <linux/syscore_ops.h>
 #include <linux/serial_core.h>
+#include <linux/serial_s3c.h>
 #include <linux/platform_device.h>
 #include <linux/io.h>
 #include <linux/reboot.h>
@@ -43,7 +44,6 @@
 #include <plat/nand-core.h>
 #include <plat/pll.h>
 #include <plat/pm.h>
-#include <plat/regs-serial.h>
 #include <plat/regs-spi.h>
 
 #include "common.h"

arch/arm/mach-s3c24xx/s3c2416.c

@@ -48,6 +48,7 @@
 #include <asm/system_misc.h>
 
 #include <mach/regs-s3c2443-clock.h>
+#include <mach/rtc-core.h>
 
 #include <plat/gpio-core.h>
 #include <plat/gpio-cfg.h>
@@ -61,7 +62,6 @@
 #include <plat/fb-core.h>
 #include <plat/nand-core.h>
 #include <plat/adc-core.h>
-#include <plat/rtc-core.h>
 #include <plat/spi-core.h>
 
 #include "common.h"

arch/arm/mach-s3c24xx/s3c2443.c

@@ -34,6 +34,7 @@
 #include <asm/system_misc.h>
 
 #include <mach/regs-s3c2443-clock.h>
+#include <mach/rtc-core.h>
 
 #include <plat/gpio-core.h>
 #include <plat/gpio-cfg.h>
@@ -43,7 +44,6 @@
 #include <plat/fb-core.h>
 #include <plat/nand-core.h>
 #include <plat/adc-core.h>
-#include <plat/rtc-core.h>
 #include <plat/spi-core.h>
 
 static struct map_desc s3c2443_iodesc[] __initdata = {

arch/arm/mach-s3c24xx/s3c244x.c

@@ -17,6 +17,7 @@
 #include <linux/timer.h>
 #include <linux/init.h>
 #include <linux/serial_core.h>
+#include <linux/serial_s3c.h>
 #include <linux/platform_device.h>
 #include <linux/reboot.h>
 #include <linux/device.h>
@@ -35,7 +36,6 @@
 #include <plat/cpu-freq.h>
 
 #include <mach/regs-clock.h>
-#include <plat/regs-serial.h>
 #include <mach/regs-gpio.h>
 
 #include <plat/clock.h>

arch/arm/mach-s3c24xx/sleep-s3c2410.S

@@ -25,13 +25,13 @@
 */
 
 #include <linux/linkage.h>
+#include <linux/serial_s3c.h>
 #include <asm/assembler.h>
 #include <mach/hardware.h>
 #include <mach/map.h>
 
 #include <mach/regs-gpio.h>
 #include <mach/regs-clock.h>
-#include <plat/regs-serial.h>
 
 #include "regs-mem.h"
 

arch/arm/mach-s3c24xx/sleep.S

@@ -25,13 +25,13 @@
 */
 
 #include <linux/linkage.h>
+#include <linux/serial_s3c.h>
 #include <asm/assembler.h>
 #include <mach/hardware.h>
 #include <mach/map.h>
 
 #include <mach/regs-gpio.h>
 #include <mach/regs-clock.h>
-#include <plat/regs-serial.h>
 
 /* CONFIG_DEBUG_RESUME is dangerous if your bootloader does not
  * reset the UART configuration, only enable if you really need this!

arch/arm/mach-s3c64xx/common.c

@@ -25,6 +25,7 @@
 #include <linux/interrupt.h>
 #include <linux/ioport.h>
 #include <linux/serial_core.h>
+#include <linux/serial_s3c.h>
 #include <linux/platform_device.h>
 #include <linux/reboot.h>
 #include <linux/io.h>
@@ -50,7 +51,6 @@
 #include <plat/irq-uart.h>
 #include <plat/pwm-core.h>
 #include <plat/regs-irqtype.h>
-#include <plat/regs-serial.h>
 #include <plat/watchdog-reset.h>
 
 #include "common.h"

arch/arm/mach-s3c64xx/include/mach/debug-macro.S

@@ -12,8 +12,8 @@
 
 /* pull in the relevant register and map files. */
 
+#include <linux/serial_s3c.h>
 #include <mach/map.h>
-#include <plat/regs-serial.h>
 
 	/* note, for the boot process to work we have to keep the UART
 	 * virtual address aligned to an 1MiB boundary for the L1

arch/arm/mach-s3c64xx/include/mach/tick.h

@@ -1,31 +0,0 @@
-/* linux/arch/arm/mach-s3c6400/include/mach/tick.h
- *
- * Copyright 2008 Openmoko, Inc.
- * Copyright 2008 Simtec Electronics
- *	http://armlinux.simtec.co.uk/
- *	Ben Dooks <ben@simtec.co.uk>
- *
- * S3C64XX - Timer tick support definitions
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __ASM_ARCH_TICK_H
-#define __ASM_ARCH_TICK_H __FILE__
-
-#include <linux/irqchip/arm-vic.h>
-
-/* note, the timer interrutps turn up in 2 places, the vic and then
- * the timer block. We take the VIC as the base at the moment.
- */
-static inline u32 s3c24xx_ostimer_pending(void)
-{
-	u32 pend = __raw_readl(VA_VIC0 + VIC_RAW_STATUS);
-	return pend & 1 << (IRQ_TIMER4_VIC - S3C64XX_IRQ_VIC0(0));
-}
-
-#define TICK_MAX	(0xffffffff)
-
-#endif /* __ASM_ARCH_6400_TICK_H */

arch/arm/mach-s3c64xx/include/mach/uncompress.h

@@ -1,31 +0,0 @@
-/* arch/arm/mach-s3c6400/include/mach/uncompress.h
- *
- * Copyright 2008 Openmoko, Inc.
- * Copyright 2008 Simtec Electronics
- *	http://armlinux.simtec.co.uk/
- *	Ben Dooks <ben@simtec.co.uk>
- *
- * S3C6400 - uncompress code
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __ASM_ARCH_UNCOMPRESS_H
-#define __ASM_ARCH_UNCOMPRESS_H
-
-#include <mach/map.h>
-#include <plat/uncompress.h>
-
-static void arch_detect_cpu(void)
-{
-	/* we do not need to do any cpu detection here at the moment. */
-	fifo_mask = S3C2440_UFSTAT_TXMASK;
-	fifo_max = 63 << S3C2440_UFSTAT_TXSHIFT;
-
-	uart_base = (volatile u8 *)S3C_PA_UART +
-		(S3C_UART_OFFSET * CONFIG_S3C_LOWLEVEL_UART_PORT);
-}
-
-#endif /* __ASM_ARCH_UNCOMPRESS_H */

arch/arm/mach-s3c64xx/irq-pm.c

@@ -20,13 +20,13 @@
 #include <linux/syscore_ops.h>
 #include <linux/interrupt.h>
 #include <linux/serial_core.h>
+#include <linux/serial_s3c.h>
 #include <linux/irq.h>
 #include <linux/io.h>
 #include <linux/of.h>
 
 #include <mach/map.h>
 
-#include <plat/regs-serial.h>
 #include <mach/regs-gpio.h>
 #include <plat/cpu.h>
 #include <plat/pm.h>

arch/arm/mach-s3c64xx/mach-anw6410.c

@@ -20,6 +20,7 @@
 #include <linux/timer.h>
 #include <linux/init.h>
 #include <linux/serial_core.h>
+#include <linux/serial_s3c.h>
 #include <linux/platform_device.h>
 #include <linux/io.h>
 #include <linux/i2c.h>
@@ -41,7 +42,6 @@
 #include <asm/irq.h>
 #include <asm/mach-types.h>
 
-#include <plat/regs-serial.h>
 #include <linux/platform_data/i2c-s3c2410.h>
 #include <plat/fb.h>
 

arch/arm/mach-s3c64xx/mach-crag6410.c

@@ -14,6 +14,7 @@
 #include <linux/kernel.h>
 #include <linux/list.h>
 #include <linux/serial_core.h>
+#include <linux/serial_s3c.h>
 #include <linux/platform_device.h>
 #include <linux/fb.h>
 #include <linux/io.h>
@@ -51,7 +52,6 @@
 #include <mach/regs-gpio.h>
 #include <mach/gpio-samsung.h>
 
-#include <plat/regs-serial.h>
 #include <plat/fb.h>
 #include <plat/sdhci.h>
 #include <plat/gpio-cfg.h>

arch/arm/mach-s3c64xx/mach-hmt.c

@@ -11,6 +11,7 @@
 #include <linux/kernel.h>
 #include <linux/init.h>
 #include <linux/serial_core.h>
+#include <linux/serial_s3c.h>
 #include <linux/platform_device.h>
 #include <linux/io.h>
 #include <linux/i2c.h>
@@ -33,7 +34,6 @@
 #include <asm/irq.h>
 #include <asm/mach-types.h>
 
-#include <plat/regs-serial.h>
 #include <linux/platform_data/i2c-s3c2410.h>
 #include <mach/gpio-samsung.h>
 #include <plat/fb.h>

arch/arm/mach-s3c64xx/mach-mini6410.c

@@ -22,6 +22,7 @@
 #include <linux/mtd/mtd.h>
 #include <linux/mtd/partitions.h>
 #include <linux/serial_core.h>
+#include <linux/serial_s3c.h>
 #include <linux/types.h>
 
 #include <asm/mach-types.h>
@@ -38,7 +39,6 @@
 #include <plat/fb.h>
 #include <linux/platform_data/mtd-nand-s3c2410.h>
 #include <linux/platform_data/mmc-sdhci-s3c.h>
-#include <plat/regs-serial.h>
 #include <plat/sdhci.h>
 #include <linux/platform_data/touchscreen-s3c2410.h>
 

arch/arm/mach-s3c64xx/mach-ncp.c

@@ -16,6 +16,7 @@
 #include <linux/timer.h>
 #include <linux/init.h>
 #include <linux/serial_core.h>
+#include <linux/serial_s3c.h>
 #include <linux/platform_device.h>
 #include <linux/io.h>
 #include <linux/i2c.h>
@@ -36,7 +37,6 @@
 #include <asm/irq.h>
 #include <asm/mach-types.h>
 
-#include <plat/regs-serial.h>
 #include <linux/platform_data/i2c-s3c2410.h>
 #include <plat/fb.h>
 

arch/arm/mach-s3c64xx/mach-real6410.c

@@ -23,6 +23,7 @@
 #include <linux/mtd/partitions.h>
 #include <linux/platform_device.h>
 #include <linux/serial_core.h>
+#include <linux/serial_s3c.h>
 #include <linux/types.h>
 
 #include <asm/mach-types.h>
@@ -38,7 +39,6 @@
 #include <plat/devs.h>
 #include <plat/fb.h>
 #include <linux/platform_data/mtd-nand-s3c2410.h>
-#include <plat/regs-serial.h>
 #include <linux/platform_data/touchscreen-s3c2410.h>
 
 #include <video/platform_lcd.h>

arch/arm/mach-s3c64xx/mach-smartq.c

@@ -16,6 +16,7 @@
 #include <linux/platform_device.h>
 #include <linux/pwm_backlight.h>
 #include <linux/serial_core.h>
+#include <linux/serial_s3c.h>
 #include <linux/spi/spi_gpio.h>
 #include <linux/usb/gpio_vbus.h>
 #include <linux/platform_data/s3c-hsotg.h>
@@ -33,7 +34,6 @@
 #include <linux/platform_data/i2c-s3c2410.h>
 #include <plat/gpio-cfg.h>
 #include <linux/platform_data/hwmon-s3c.h>
-#include <plat/regs-serial.h>
 #include <linux/platform_data/usb-ohci-s3c2410.h>
 #include <plat/sdhci.h>
 #include <linux/platform_data/touchscreen-s3c2410.h>

arch/arm/mach-s3c64xx/mach-smdk6400.c

@@ -16,6 +16,7 @@
 #include <linux/timer.h>
 #include <linux/init.h>
 #include <linux/serial_core.h>
+#include <linux/serial_s3c.h>
 #include <linux/platform_device.h>
 #include <linux/i2c.h>
 #include <linux/io.h>
@@ -29,8 +30,6 @@
 #include <mach/hardware.h>
 #include <mach/map.h>
 
-#include <plat/regs-serial.h>
-
 #include <plat/clock.h>
 #include <plat/devs.h>
 #include <plat/cpu.h>

arch/arm/mach-s3c64xx/mach-smdk6410.c

@@ -19,6 +19,7 @@
 #include <linux/init.h>
 #include <linux/input.h>
 #include <linux/serial_core.h>
+#include <linux/serial_s3c.h>
 #include <linux/platform_device.h>
 #include <linux/io.h>
 #include <linux/i2c.h>
@@ -55,7 +56,6 @@
 #include <asm/irq.h>
 #include <asm/mach-types.h>
 
-#include <plat/regs-serial.h>
 #include <mach/regs-gpio.h>
 #include <mach/gpio-samsung.h>
 #include <linux/platform_data/ata-samsung_cf.h>

arch/arm/mach-s3c64xx/s3c6400.c

@@ -23,6 +23,7 @@
 #include <linux/io.h>
 #include <linux/device.h>
 #include <linux/serial_core.h>
+#include <linux/serial_s3c.h>
 #include <linux/platform_device.h>
 #include <linux/of.h>
 
@@ -34,7 +35,6 @@
 #include <asm/irq.h>
 
 #include <plat/cpu-freq.h>
-#include <plat/regs-serial.h>
 #include <mach/regs-clock.h>
 
 #include <plat/cpu.h>

arch/arm/mach-s3c64xx/s3c6410.c

@@ -24,6 +24,7 @@
 #include <linux/io.h>
 #include <linux/device.h>
 #include <linux/serial_core.h>
+#include <linux/serial_s3c.h>
 #include <linux/platform_device.h>
 #include <linux/of.h>
 
@@ -35,7 +36,6 @@
 #include <asm/irq.h>
 
 #include <plat/cpu-freq.h>
-#include <plat/regs-serial.h>
 #include <mach/regs-clock.h>
 
 #include <plat/cpu.h>

arch/arm/mach-s5p64x0/common.c

@@ -19,6 +19,7 @@
 #include <linux/io.h>
 #include <linux/device.h>
 #include <linux/serial_core.h>
+#include <linux/serial_s3c.h>
 #include <clocksource/samsung_pwm.h>
 #include <linux/platform_device.h>
 #include <linux/sched.h>
@@ -50,7 +51,6 @@
 #include <plat/gpio-cfg.h>
 #include <plat/pwm-core.h>
 #include <plat/regs-irqtype.h>
-#include <plat/regs-serial.h>
 #include <plat/watchdog-reset.h>
 
 #include "common.h"

arch/arm/mach-s5p64x0/include/mach/debug-macro.S

@@ -10,11 +10,10 @@
 
 /* pull in the relevant register and map files. */
 
+#include <linux/serial_s3c.h>
 #include <plat/map-base.h>
 #include <plat/map-s5p.h>
 
-#include <plat/regs-serial.h>
-
 	.macro addruart, rp, rv, tmp
 		mov	\rp, #0xE0000000
 		orr	\rp, \rp, #0x00100000

arch/arm/mach-s5p64x0/include/mach/uncompress.h

@@ -1,34 +0,0 @@
-/* linux/arch/arm/mach-s5p64x0/include/mach/uncompress.h
- *
- * Copyright (c) 2009-2010 Samsung Electronics Co., Ltd.
- *		http://www.samsung.com
- *
- * S5P64X0 - uncompress code
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __ASM_ARCH_UNCOMPRESS_H
-#define __ASM_ARCH_UNCOMPRESS_H
-
-#include <mach/map.h>
-#include <plat/uncompress.h>
-
-static void arch_detect_cpu(void)
-{
-	unsigned int chipid;
-
-	chipid = *(const volatile unsigned int __force *) 0xE0100118;
-
-	if ((chipid & 0xff000) == 0x50000)
-		uart_base = (volatile u8 *)S5P6450_PA_UART(CONFIG_S3C_LOWLEVEL_UART_PORT);
-	else
-		uart_base = (volatile u8 *)S5P6440_PA_UART(CONFIG_S3C_LOWLEVEL_UART_PORT);
-
-	fifo_mask = S3C2440_UFSTAT_TXMASK;
-	fifo_max = 63 << S3C2440_UFSTAT_TXSHIFT;
-}
-
-#endif /* __ASM_ARCH_UNCOMPRESS_H */

arch/arm/mach-s5p64x0/irq-pm.c

@@ -14,9 +14,9 @@
 
 #include <linux/syscore_ops.h>
 #include <linux/serial_core.h>
+#include <linux/serial_s3c.h>
 #include <linux/io.h>
 
-#include <plat/regs-serial.h>
 #include <plat/pm.h>
 
 #include <mach/regs-gpio.h>

arch/arm/mach-s5p64x0/mach-smdk6440.c

@@ -17,6 +17,7 @@
 #include <linux/init.h>
 #include <linux/i2c.h>
 #include <linux/serial_core.h>
+#include <linux/serial_s3c.h>
 #include <linux/platform_device.h>
 #include <linux/io.h>
 #include <linux/module.h>
@@ -39,7 +40,6 @@
 #include <mach/regs-clock.h>
 #include <mach/regs-gpio.h>
 
-#include <plat/regs-serial.h>
 #include <plat/gpio-cfg.h>
 #include <plat/clock.h>
 #include <plat/devs.h>

arch/arm/mach-s5p64x0/mach-smdk6450.c

@@ -17,6 +17,7 @@
 #include <linux/init.h>
 #include <linux/i2c.h>
 #include <linux/serial_core.h>
+#include <linux/serial_s3c.h>
 #include <linux/platform_device.h>
 #include <linux/io.h>
 #include <linux/module.h>
@@ -39,7 +40,6 @@
 #include <mach/regs-clock.h>
 #include <mach/regs-gpio.h>
 
-#include <plat/regs-serial.h>
 #include <plat/gpio-cfg.h>
 #include <plat/clock.h>
 #include <plat/devs.h>

arch/arm/mach-s5pc100/common.c

@@ -22,6 +22,7 @@
 #include <linux/io.h>
 #include <linux/device.h>
 #include <linux/serial_core.h>
+#include <linux/serial_s3c.h>
 #include <clocksource/samsung_pwm.h>
 #include <linux/platform_device.h>
 #include <linux/sched.h>
@@ -49,7 +50,6 @@
 #include <plat/onenand-core.h>
 #include <plat/pwm-core.h>
 #include <plat/spi-core.h>
-#include <plat/regs-serial.h>
 #include <plat/watchdog-reset.h>
 
 #include "common.h"

arch/arm/mach-s5pc100/include/mach/debug-macro.S

@@ -13,8 +13,8 @@
 
 /* pull in the relevant register and map files. */
 
+#include <linux/serial_s3c.h>
 #include <mach/map.h>
-#include <plat/regs-serial.h>
 
 	/* note, for the boot process to work we have to keep the UART
 	 * virtual address aligned to an 1MiB boundary for the L1

arch/arm/mach-s5pc100/include/mach/tick.h

@@ -1,31 +0,0 @@
-/* linux/arch/arm/mach-s5pc100/include/mach/tick.h
- *
- * Copyright 2009 Samsung Electronics Co.
- *	Byungho Min <bhmin@samsung.com>
- *
- * S3C64XX - Timer tick support definitions
- *
- * Based on mach-s3c6400/include/mach/tick.h
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __ASM_ARCH_TICK_H
-#define __ASM_ARCH_TICK_H __FILE__
-
-#include <linux/irqchip/arm-vic.h>
-
-/* note, the timer interrutps turn up in 2 places, the vic and then
- * the timer block. We take the VIC as the base at the moment.
- */
-static inline u32 s3c24xx_ostimer_pending(void)
-{
-	u32 pend = __raw_readl(VA_VIC0 + VIC_RAW_STATUS);
-	return pend & (1 << (IRQ_TIMER4_VIC - S5P_IRQ_VIC0(0)));
-}
-
-#define TICK_MAX	(0xffffffff)
-
-#endif /* __ASM_ARCH_TICK_H */

arch/arm/mach-s5pc100/include/mach/uncompress.h

@@ -1,30 +0,0 @@
-/* arch/arm/mach-s5pc100/include/mach/uncompress.h
- *
- * Copyright 2009 Samsung Electronics Co.
- *	Byungho Min <bhmin@samsung.com>
- *
- * S5PC100 - uncompress code
- *
- * Based on mach-s3c6400/include/mach/uncompress.h
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __ASM_ARCH_UNCOMPRESS_H
-#define __ASM_ARCH_UNCOMPRESS_H
-
-#include <mach/map.h>
-#include <plat/uncompress.h>
-
-static void arch_detect_cpu(void)
-{
-	/* we do not need to do any cpu detection here at the moment. */
-	fifo_mask = S3C2440_UFSTAT_TXMASK;
-	fifo_max = 63 << S3C2440_UFSTAT_TXSHIFT;
-
-	uart_base = (volatile u8 *)S5P_PA_UART(CONFIG_S3C_LOWLEVEL_UART_PORT);
-}
-
-#endif /* __ASM_ARCH_UNCOMPRESS_H */

arch/arm/mach-s5pc100/mach-smdkc100.c

@@ -16,6 +16,7 @@
 #include <linux/timer.h>
 #include <linux/init.h>
 #include <linux/serial_core.h>
+#include <linux/serial_s3c.h>
 #include <linux/platform_device.h>
 #include <linux/io.h>
 #include <linux/gpio.h>
@@ -37,7 +38,6 @@
 #include <asm/irq.h>
 #include <asm/mach-types.h>
 
-#include <plat/regs-serial.h>
 #include <plat/gpio-cfg.h>
 
 #include <plat/clock.h>

arch/arm/mach-s5pv210/common.c

@@ -24,6 +24,7 @@
 #include <linux/sched.h>
 #include <linux/dma-mapping.h>
 #include <linux/serial_core.h>
+#include <linux/serial_s3c.h>
 
 #include <asm/proc-fns.h>
 #include <asm/mach/arch.h>
@@ -46,7 +47,6 @@
 #include <plat/pwm-core.h>
 #include <plat/tv-core.h>
 #include <plat/spi-core.h>
-#include <plat/regs-serial.h>
 
 #include "common.h"
 

arch/arm/mach-s5pv210/include/mach/debug-macro.S

@@ -12,8 +12,8 @@
 
 /* pull in the relevant register and map files. */
 
+#include <linux/serial_s3c.h>
 #include <mach/map.h>
-#include <plat/regs-serial.h>
 
 	/* note, for the boot process to work we have to keep the UART
 	 * virtual address aligned to an 1MiB boundary for the L1

arch/arm/mach-s5pv210/include/mach/uncompress.h

@@ -1,28 +0,0 @@
-/* linux/arch/arm/mach-s5pv210/include/mach/uncompress.h
- *
- * Copyright (c) 2010 Samsung Electronics Co., Ltd.
- *		http://www.samsung.com/
- *
- * S5PV210 - uncompress code
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __ASM_ARCH_UNCOMPRESS_H
-#define __ASM_ARCH_UNCOMPRESS_H
-
-#include <mach/map.h>
-#include <plat/uncompress.h>
-
-static void arch_detect_cpu(void)
-{
-	/* we do not need to do any cpu detection here at the moment. */
-	fifo_mask = S5PV210_UFSTAT_TXMASK;
-	fifo_max = 63 << S5PV210_UFSTAT_TXSHIFT;
-
-	uart_base = (volatile u8 *)S5P_PA_UART(CONFIG_S3C_LOWLEVEL_UART_PORT);
-}
-
-#endif /* __ASM_ARCH_UNCOMPRESS_H */

arch/arm/mach-s5pv210/mach-aquila.c

@@ -12,6 +12,7 @@
 #include <linux/types.h>
 #include <linux/init.h>
 #include <linux/serial_core.h>
+#include <linux/serial_s3c.h>
 #include <linux/fb.h>
 #include <linux/i2c.h>
 #include <linux/i2c-gpio.h>
@@ -32,7 +33,6 @@
 #include <mach/regs-clock.h>
 
 #include <plat/gpio-cfg.h>
-#include <plat/regs-serial.h>
 #include <plat/devs.h>
 #include <plat/cpu.h>
 #include <plat/fb.h>

arch/arm/mach-s5pv210/mach-goni.c

@@ -12,6 +12,7 @@
 #include <linux/types.h>
 #include <linux/init.h>
 #include <linux/serial_core.h>
+#include <linux/serial_s3c.h>
 #include <linux/fb.h>
 #include <linux/i2c.h>
 #include <linux/i2c-gpio.h>
@@ -39,7 +40,6 @@
 #include <mach/regs-clock.h>
 
 #include <plat/gpio-cfg.h>
-#include <plat/regs-serial.h>
 #include <plat/devs.h>
 #include <plat/cpu.h>
 #include <plat/fb.h>

arch/arm/mach-s5pv210/mach-smdkc110.c

@@ -12,6 +12,7 @@
 #include <linux/types.h>
 #include <linux/init.h>
 #include <linux/serial_core.h>
+#include <linux/serial_s3c.h>
 #include <linux/i2c.h>
 #include <linux/device.h>
 
@@ -23,7 +24,6 @@
 #include <mach/map.h>
 #include <mach/regs-clock.h>
 
-#include <plat/regs-serial.h>
 #include <plat/devs.h>
 #include <plat/cpu.h>
 #include <linux/platform_data/ata-samsung_cf.h>

arch/arm/mach-s5pv210/mach-smdkv210.c

@@ -13,6 +13,7 @@
 #include <linux/i2c.h>
 #include <linux/init.h>
 #include <linux/serial_core.h>
+#include <linux/serial_s3c.h>
 #include <linux/device.h>
 #include <linux/dm9000.h>
 #include <linux/fb.h>
@@ -32,7 +33,6 @@
 #include <mach/map.h>
 #include <mach/regs-clock.h>
 
-#include <plat/regs-serial.h>
 #include <plat/regs-srom.h>
 #include <plat/gpio-cfg.h>
 #include <plat/devs.h>

arch/arm/mach-s5pv210/mach-torbreck.c

@@ -13,6 +13,7 @@
 #include <linux/i2c.h>
 #include <linux/init.h>
 #include <linux/serial_core.h>
+#include <linux/serial_s3c.h>
 
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
@@ -22,7 +23,6 @@
 #include <mach/map.h>
 #include <mach/regs-clock.h>
 
-#include <plat/regs-serial.h>
 #include <plat/devs.h>
 #include <plat/cpu.h>
 #include <linux/platform_data/i2c-s3c2410.h>

arch/arm/plat-samsung/clock.c

@@ -52,7 +52,7 @@
 #include <plat/cpu.h>
 
 #include <linux/serial_core.h>
-#include <plat/regs-serial.h> /* for s3c24xx_uart_devs */
+#include <linux/serial_s3c.h> /* for s3c24xx_uart_devs */
 
 /* clock information */
 

arch/arm/plat-samsung/cpu.c

@@ -28,13 +28,6 @@ unsigned int samsung_rev(void)
 }
 EXPORT_SYMBOL(samsung_rev);
 
-void __init s3c24xx_init_cpu(void)
-{
-	/* nothing here yet */
-
-	samsung_cpu_rev = 0;
-}
-
 void __init s3c64xx_init_cpu(void)
 {
 	samsung_cpu_id = __raw_readl(S3C_VA_SYS + 0x118);

arch/arm/plat-samsung/devs.c

@@ -18,6 +18,7 @@
 #include <linux/timer.h>
 #include <linux/init.h>
 #include <linux/serial_core.h>
+#include <linux/serial_s3c.h>
 #include <linux/platform_device.h>
 #include <linux/io.h>
 #include <linux/slab.h>
@@ -64,7 +65,6 @@
 #include <linux/platform_data/usb-s3c2410_udc.h>
 #include <linux/platform_data/usb-ohci-s3c2410.h>
 #include <plat/usb-phy.h>
-#include <plat/regs-serial.h>
 #include <plat/regs-spi.h>
 #include <linux/platform_data/spi-s3c64xx.h>
 
@@ -744,10 +744,7 @@ void __init s5p_i2c_hdmiphy_set_platdata(struct s3c2410_platform_i2c *pd)
 	if (!pd) {
 		pd = &default_i2c_data;
 
-		if (soc_is_exynos4210() ||
-		    soc_is_exynos4212() || soc_is_exynos4412())
-			pd->bus_num = 8;
-		else if (soc_is_s5pv210())
+		if (soc_is_s5pv210())
 			pd->bus_num = 3;
 		else
 			pd->bus_num = 0;
@@ -764,10 +761,7 @@ void __init s5p_hdmi_set_platdata(struct i2c_board_info *hdmiphy_info,
 {
 	struct s5p_hdmi_platform_data *pd = &s5p_hdmi_def_platdata;
 
-	if (soc_is_exynos4210() ||
-	    soc_is_exynos4212() || soc_is_exynos4412())
-		pd->hdmiphy_bus = 8;
-	else if (soc_is_s5pv210())
+	if (soc_is_s5pv210())
 		pd->hdmiphy_bus = 3;
 	else
 		pd->hdmiphy_bus = 0;

arch/arm/plat-samsung/include/plat/cpu.h

@@ -199,7 +199,6 @@ extern void s5p_init_irq(u32 *vic, u32 num_vic);
 
 extern void s3c24xx_init_io(struct map_desc *mach_desc, int size);
 
-extern void s3c24xx_init_cpu(void);
 extern void s3c64xx_init_cpu(void);
 extern void s5p_init_cpu(void __iomem *cpuid_addr);
 

arch/arm/plat-samsung/include/plat/regs-serial.h

@@ -1 +0,0 @@
-#include <linux/serial_s3c.h>

arch/arm/plat-samsung/include/plat/uncompress.h

@@ -1,175 +0,0 @@
-/* arch/arm/plat-samsung/include/plat/uncompress.h
- *
- * Copyright 2003, 2007 Simtec Electronics
- *	http://armlinux.simtec.co.uk/
- *	Ben Dooks <ben@simtec.co.uk>
- *
- * S3C - uncompress code
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __ASM_PLAT_UNCOMPRESS_H
-#define __ASM_PLAT_UNCOMPRESS_H
-
-typedef unsigned int upf_t;	/* cannot include linux/serial_core.h */
-
-/* uart setup */
-
-unsigned int fifo_mask;
-unsigned int fifo_max;
-
-volatile u8 *uart_base;
-
-/* forward declerations */
-
-static void arch_detect_cpu(void);
-
-/* defines for UART registers */
-
-#include <plat/regs-serial.h>
-
-/* working in physical space... */
-#define S3C_WDOGREG(x)	((S3C_PA_WDT + (x)))
-
-#define S3C2410_WTCON	S3C_WDOGREG(0x00)
-#define S3C2410_WTDAT	S3C_WDOGREG(0x04)
-#define S3C2410_WTCNT	S3C_WDOGREG(0x08)
-
-#define S3C2410_WTCON_RSTEN	(1 << 0)
-#define S3C2410_WTCON_ENABLE	(1 << 5)
-
-#define S3C2410_WTCON_DIV128	(3 << 3)
-
-#define S3C2410_WTCON_PRESCALE(x)	((x) << 8)
-
-/* how many bytes we allow into the FIFO at a time in FIFO mode */
-#define FIFO_MAX	 (14)
-
-static __inline__ void
-uart_wr(unsigned int reg, unsigned int val)
-{
-	volatile unsigned int *ptr;
-
-	ptr = (volatile unsigned int *)(reg + uart_base);
-	*ptr = val;
-}
-
-static __inline__ unsigned int
-uart_rd(unsigned int reg)
-{
-	volatile unsigned int *ptr;
-
-	ptr = (volatile unsigned int *)(reg + uart_base);
-	return *ptr;
-}
-
-/* we can deal with the case the UARTs are being run
- * in FIFO mode, so that we don't hold up our execution
- * waiting for tx to happen...
-*/
-
-static void putc(int ch)
-{
-	if (!config_enabled(CONFIG_DEBUG_LL))
-		return;
-
-	if (uart_rd(S3C2410_UFCON) & S3C2410_UFCON_FIFOMODE) {
-		int level;
-
-		while (1) {
-			level = uart_rd(S3C2410_UFSTAT);
-			level &= fifo_mask;
-
-			if (level < fifo_max)
-				break;
-		}
-
-	} else {
-		/* not using fifos */
-
-		while ((uart_rd(S3C2410_UTRSTAT) & S3C2410_UTRSTAT_TXE) != S3C2410_UTRSTAT_TXE)
-			barrier();
-	}
-
-	/* write byte to transmission register */
-	uart_wr(S3C2410_UTXH, ch);
-}
-
-static inline void flush(void)
-{
-}
-
-#define __raw_writel(d, ad)			\
-	do {							\
-		*((volatile unsigned int __force *)(ad)) = (d); \
-	} while (0)
-
-#ifdef CONFIG_S3C_BOOT_ERROR_RESET
-
-static void arch_decomp_error(const char *x)
-{
-	putstr("\n\n");
-	putstr(x);
-	putstr("\n\n -- System resetting\n");
-
-	__raw_writel(0x4000, S3C2410_WTDAT);
-	__raw_writel(0x4000, S3C2410_WTCNT);
-	__raw_writel(S3C2410_WTCON_ENABLE | S3C2410_WTCON_DIV128 | S3C2410_WTCON_RSTEN | S3C2410_WTCON_PRESCALE(0x40), S3C2410_WTCON);
-
-	while(1);
-}
-
-#define arch_error arch_decomp_error
-#endif
-
-#ifdef CONFIG_S3C_BOOT_UART_FORCE_FIFO
-static inline void arch_enable_uart_fifo(void)
-{
-	u32 fifocon;
-
-	if (!config_enabled(CONFIG_DEBUG_LL))
-		return;
-
-	fifocon = uart_rd(S3C2410_UFCON);
-
-	if (!(fifocon & S3C2410_UFCON_FIFOMODE)) {
-		fifocon |= S3C2410_UFCON_RESETBOTH;
-		uart_wr(S3C2410_UFCON, fifocon);
-
-		/* wait for fifo reset to complete */
-		while (1) {
-			fifocon = uart_rd(S3C2410_UFCON);
-			if (!(fifocon & S3C2410_UFCON_RESETBOTH))
-				break;
-		}
-
-		uart_wr(S3C2410_UFCON, S3C2410_UFCON_FIFOMODE);
-	}
-}
-#else
-#define arch_enable_uart_fifo() do { } while(0)
-#endif
-
-
-static void
-arch_decomp_setup(void)
-{
-	/* we may need to setup the uart(s) here if we are not running
-	 * on an BAST... the BAST will have left the uarts configured
-	 * after calling linux.
-	 */
-
-	arch_detect_cpu();
-
-	/* Enable the UART FIFOs if they where not enabled and our
-	 * configuration says we should turn them on.
-	 */
-
-	arch_enable_uart_fifo();
-}
-
-
-#endif /* __ASM_PLAT_UNCOMPRESS_H */

arch/arm/plat-samsung/init.c

@@ -21,6 +21,7 @@
 #include <linux/interrupt.h>
 #include <linux/ioport.h>
 #include <linux/serial_core.h>
+#include <linux/serial_s3c.h>
 #include <linux/platform_device.h>
 #include <linux/of.h>
 
@@ -33,8 +34,6 @@
 #include <plat/devs.h>
 #include <plat/clock.h>
 
-#include <plat/regs-serial.h>
-
 static struct cpu_table *cpu;
 
 static struct cpu_table * __init s3c_lookup_cpu(unsigned long idcode,

arch/arm/plat-samsung/pm-gpio.c

@@ -196,8 +196,7 @@ struct samsung_gpio_pm samsung_gpio_pm_2bit = {
 	.resume = samsung_gpio_pm_2bit_resume,
 };
 
-#if defined(CONFIG_ARCH_S3C64XX) || defined(CONFIG_PLAT_S5P) \
-	|| defined(CONFIG_ARCH_EXYNOS)
+#if defined(CONFIG_ARCH_S3C64XX) || defined(CONFIG_PLAT_S5P)
 static void samsung_gpio_pm_4bit_save(struct samsung_gpio_chip *chip)
 {
 	chip->pm_save[1] = __raw_readl(chip->base + OFFS_CON);
@@ -307,7 +306,7 @@ struct samsung_gpio_pm samsung_gpio_pm_4bit = {
 	.save	= samsung_gpio_pm_4bit_save,
 	.resume = samsung_gpio_pm_4bit_resume,
 };
-#endif /* CONFIG_ARCH_S3C64XX || CONFIG_PLAT_S5P || CONFIG_ARCH_EXYNOS */
+#endif /* CONFIG_ARCH_S3C64XX || CONFIG_PLAT_S5P */
 
 /**
  * samsung_pm_save_gpio() - save gpio chip data for suspend

arch/arm/plat-samsung/pm.c

@@ -18,13 +18,12 @@
 #include <linux/delay.h>
 #include <linux/of.h>
 #include <linux/serial_core.h>
+#include <linux/serial_s3c.h>
 #include <linux/io.h>
 
 #include <asm/cacheflush.h>
 #include <asm/suspend.h>
 
-#include <plat/regs-serial.h>
-
 #ifdef CONFIG_SAMSUNG_ATAGS
 #include <mach/hardware.h>
 #include <mach/map.h>

arch/arm/plat-samsung/s5p-irq-pm.c

@@ -22,10 +22,7 @@
 #include <mach/map.h>
 
 #include <mach/regs-gpio.h>
-
-#ifndef CONFIG_ARCH_EXYNOS
 #include <mach/regs-irq.h>
-#endif
 
 /* state for IRQs over sleep */
 
@@ -43,18 +40,8 @@ int s3c_irq_wake(struct irq_data *data, unsigned int state)
 	unsigned long irqbit;
 	unsigned int irq_rtc_tic, irq_rtc_alarm;
 
-#ifdef CONFIG_ARCH_EXYNOS
-	if (soc_is_exynos5250()) {
-		irq_rtc_tic = EXYNOS5_IRQ_RTC_TIC;
-		irq_rtc_alarm = EXYNOS5_IRQ_RTC_ALARM;
-	} else {
-		irq_rtc_tic = EXYNOS4_IRQ_RTC_TIC;
-		irq_rtc_alarm = EXYNOS4_IRQ_RTC_ALARM;
-	}
-#else
 	irq_rtc_tic = IRQ_RTC_TIC;
 	irq_rtc_alarm = IRQ_RTC_ALARM;
-#endif
 
 	if (data->irq == irq_rtc_tic || data->irq == irq_rtc_alarm) {
 		irqbit = 1 << (data->irq + 1 - irq_rtc_alarm);