treewide: Fix typos in Kconfig

This patch fixes some spelling typos found in Kconfig files.

Signed-off-by: Masanari Iida <standby24x7@gmail.com>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

arch/alpha/Kconfig

@@ -505,7 +505,7 @@ config ALPHA_QEMU
 
 	  Generic kernels will auto-detect QEMU.  But when building a
 	  system-specific kernel, the assumption is that we want to
-	  elimiate as many runtime tests as possible.
+	  eliminate as many runtime tests as possible.
 
 	  If unsure, say N.
 

arch/arc/Kconfig

@@ -298,7 +298,7 @@ config ARC_MMU_V1
 config ARC_MMU_V2
 	bool "MMU v2"
 	help
-	  Fixed the deficiency of v1 - possible thrashing in memcpy sceanrio
+	  Fixed the deficiency of v1 - possible thrashing in memcpy scenario
 	  when 2 D-TLB and 1 I-TLB entries index into same 2way set.
 
 config ARC_MMU_V3
@@ -371,7 +371,7 @@ config ARC_FPU_SAVE_RESTORE
 	bool "Enable FPU state persistence across context switch"
 	default n
 	help
-	  Double Precision Floating Point unit had dedictaed regs which
+	  Double Precision Floating Point unit had dedicated regs which
 	  need to be saved/restored across context-switch.
 	  Note that ARC FPU is overly simplistic, unlike say x86, which has
 	  hardware pieces to allow software to conditionally save/restore,
@@ -467,7 +467,7 @@ config ARC_PLAT_NEEDS_PHYS_TO_DMA
 	bool
 
 config ARC_KVADDR_SIZE
-	int "Kernel Virtaul Address Space size (MB)"
+	int "Kernel Virtual Address Space size (MB)"
 	range 0 512
 	default "256"
 	help

arch/arm/mach-bcm/Kconfig

@@ -22,7 +22,7 @@ config ARCH_BCM_IPROC
 	help
 	  This enables support for systems based on Broadcom IPROC architected SoCs.
 	  The IPROC complex contains one or more ARM CPUs along with common
-	  core periperals. Application specific SoCs are created by adding a
+	  core peripherals. Application specific SoCs are created by adding a
 	  uArchitecture containing peripherals outside of the IPROC complex.
 	  Currently supported SoCs are Cygnus.
 
@@ -68,8 +68,8 @@ config ARCH_BCM_5301X
 	  Support for Broadcom BCM470X and BCM5301X SoCs with ARM CPU cores.
 
 	  This is a network SoC line mostly used in home routers and
-	  wifi access points, it's internal name is Northstar.
-	  This inclused the following SoC: BCM53010, BCM53011, BCM53012,
+	  wifi access points, its internal name is Northstar.
+	  This includes the following SoC: BCM53010, BCM53011, BCM53012,
 	  BCM53014, BCM53015, BCM53016, BCM53017, BCM53018, BCM4707,
 	  BCM4708 and BCM4709.
 

arch/arm/plat-samsung/Kconfig

@@ -278,7 +278,7 @@ config SAMSUNG_PM_CHECK_CHUNKSIZE
 	help
 	  Set the chunksize in Kilobytes of the CRC for checking memory
 	  corruption over suspend and resume. A smaller value will mean that
-	  the CRC data block will take more memory, but wil identify any
+	  the CRC data block will take more memory, but will identify any
 	  faults with better precision.
 
 	  See <file:Documentation/arm/Samsung-S3C24XX/Suspend.txt>

arch/arm64/Kconfig

@@ -946,7 +946,7 @@ config ARM64_UAO
 	help
 	  User Access Override (UAO; part of the ARMv8.2 Extensions)
 	  causes the 'unprivileged' variant of the load/store instructions to
-	  be overriden to be privileged.
+	  be overridden to be privileged.
 
 	  This option changes get_user() and friends to use the 'unprivileged'
 	  variant of the load/store instructions. This ensures that user-space

arch/powerpc/platforms/Kconfig

@@ -78,7 +78,7 @@ config UDBG_RTAS_CONSOLE
 config PPC_SMP_MUXED_IPI
 	bool
 	help
-	  Select this opton if your platform supports SMP and your
+	  Select this option if your platform supports SMP and your
 	  interrupt controller provides less than 4 interrupts to each
 	  cpu.	This will enable the generic code to multiplex the 4
 	  messages on to one ipi.

arch/unicore32/Kconfig

@@ -114,7 +114,7 @@ endif
 
 source "arch/unicore32/mm/Kconfig"
 
-comment "Floating poing support"
+comment "Floating point support"
 
 config UNICORE_FPU_F64
 	def_bool y if !ARCH_FPGA

arch/xtensa/Kconfig

@@ -223,7 +223,7 @@ config INITIALIZE_XTENSA_MMU_INSIDE_VMLINUX
 	  then enter your normal kernel breakpoints once the MMU was mapped
 	  to the kernel mappings (0XC0000000).
 
-	  This unfortunately doesn't work for U-Boot and likley also wont
+	  This unfortunately won't work for U-Boot and likely also wont
 	  work for using KEXEC to have a hot kernel ready for doing a
 	  KDUMP.
 

drivers/net/ethernet/aquantia/Kconfig

@@ -9,7 +9,7 @@ config NET_VENDOR_AQUANTIA
 	  Set this to y if you have an Ethernet network cards that uses the aQuantia
 	  AQC107/AQC108 chipset.
 
-	  This option does not build any drivers; it casues the aQuantia
+	  This option does not build any drivers; it causes the aQuantia
 	  drivers that can be built to appear in the list of Ethernet drivers.
 
 

drivers/nfc/st-nci/Kconfig

@@ -11,7 +11,7 @@ config NFC_ST_NCI_I2C
 	select NFC_ST_NCI
 	---help---
 	  This module adds support for an I2C interface to the
-	  STMicroelectronics NFC NCI chips familly.
+	  STMicroelectronics NFC NCI chips family.
 	  Select this if your platform is using the i2c bus.
 
 	  If you choose to build a module, it'll be called st-nci_i2c.
@@ -23,7 +23,7 @@ config NFC_ST_NCI_SPI
 	select NFC_ST_NCI
 	---help---
 	  This module adds support for an SPI interface to the
-	  STMicroelectronics NFC NCI chips familly.
+	  STMicroelectronics NFC NCI chips family.
 	  Select this if your platform is using the spi bus.
 
 	  If you choose to build a module, it'll be called st-nci_spi.

drivers/nvdimm/Kconfig

@@ -96,7 +96,7 @@ config NVDIMM_DAX
 	help
 	  Support raw device dax access to a persistent memory
 	  namespace.  For environments that want to hard partition
-	  peristent memory, this capability provides a mechanism to
+	  persistent memory, this capability provides a mechanism to
 	  sub-divide a namespace into character devices that can only be
 	  accessed via DAX (mmap(2)).
 

drivers/platform/x86/Kconfig

@@ -774,7 +774,7 @@ config TOSHIBA_WMI
 	  WARNING: This driver is incomplete as it lacks a proper keymap and the
 	  *notify function only prints the ACPI event type value. Be warned that
 	  you will need to provide some information if you have a Toshiba model
-	  with WMI event hotkeys and want to help with the develpment of this
+	  with WMI event hotkeys and want to help with the development of this
 	  driver.
 
 	  If you have a WMI-based hotkeys Toshiba laptop, say Y or M here.

drivers/power/supply/Kconfig

@@ -182,7 +182,7 @@ config CHARGER_SBS
         tristate "SBS Compliant charger"
         depends on I2C
         help
-	  Say Y to include support for SBS compilant battery chargers.
+	  Say Y to include support for SBS compliant battery chargers.
 
 config BATTERY_BQ27XXX
 	tristate "BQ27xxx battery driver"

drivers/scsi/Kconfig

@@ -786,7 +786,7 @@ config SCSI_IBMVSCSIS
 	depends on PPC_PSERIES && TARGET_CORE && SCSI && PCI
 	help
 	  This is the IBM POWER Virtual SCSI Target Server
-	  This driver uses the SRP protocol for communication betwen servers
+	  This driver uses the SRP protocol for communication between servers
 	  guest and/or the host that run on the same server.
 	  More information on VSCSI protocol can be found at www.power.org
 

fs/notify/fanotify/Kconfig

@@ -21,6 +21,6 @@ config FANOTIFY_ACCESS_PERMISSIONS
 	   decisions concerning filesystem events.  This is used by some fanotify
 	   listeners which need to scan files before allowing the system access to
 	   use those files.  This is used by some anti-malware vendors and by some
-	   hierarchical storage managent systems.
+	   hierarchical storage management systems.
 
 	   If unsure, say N.