|
|
@@ -1,506 +0,0 @@
|
|
|
-/* Copyright (c) 2010 Christoph Mair <christoph.mair@gmail.com>
|
|
|
- * Copyright (c) 2012 Bosch Sensortec GmbH
|
|
|
- * Copyright (c) 2012 Unixphere AB
|
|
|
- *
|
|
|
- * This driver supports the bmp085 and bmp18x digital barometric pressure
|
|
|
- * and temperature sensors from Bosch Sensortec. The datasheets
|
|
|
- * are available from their website:
|
|
|
- * http://www.bosch-sensortec.com/content/language1/downloads/BST-BMP085-DS000-05.pdf
|
|
|
- * http://www.bosch-sensortec.com/content/language1/downloads/BST-BMP180-DS000-07.pdf
|
|
|
- *
|
|
|
- * A pressure measurement is issued by reading from pressure0_input.
|
|
|
- * The return value ranges from 30000 to 110000 pascal with a resulution
|
|
|
- * of 1 pascal (0.01 millibar) which enables measurements from 9000m above
|
|
|
- * to 500m below sea level.
|
|
|
- *
|
|
|
- * The temperature can be read from temp0_input. Values range from
|
|
|
- * -400 to 850 representing the ambient temperature in degree celsius
|
|
|
- * multiplied by 10.The resolution is 0.1 celsius.
|
|
|
- *
|
|
|
- * Because ambient pressure is temperature dependent, a temperature
|
|
|
- * measurement will be executed automatically even if the user is reading
|
|
|
- * from pressure0_input. This happens if the last temperature measurement
|
|
|
- * has been executed more then one second ago.
|
|
|
- *
|
|
|
- * To decrease RMS noise from pressure measurements, the bmp085 can
|
|
|
- * autonomously calculate the average of up to eight samples. This is
|
|
|
- * set up by writing to the oversampling sysfs file. Accepted values
|
|
|
- * are 0, 1, 2 and 3. 2^x when x is the value written to this file
|
|
|
- * specifies the number of samples used to calculate the ambient pressure.
|
|
|
- * RMS noise is specified with six pascal (without averaging) and decreases
|
|
|
- * down to 3 pascal when using an oversampling setting of 3.
|
|
|
- *
|
|
|
- * This program is free software; you can redistribute it and/or modify
|
|
|
- * it under the terms of the GNU General Public License as published by
|
|
|
- * the Free Software Foundation; either version 2 of the License, or
|
|
|
- * (at your option) any later version.
|
|
|
- *
|
|
|
- * This program is distributed in the hope that it will be useful,
|
|
|
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
|
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
|
- * GNU General Public License for more details.
|
|
|
- *
|
|
|
- * You should have received a copy of the GNU General Public License
|
|
|
- * along with this program; if not, write to the Free Software
|
|
|
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
|
|
|
- */
|
|
|
-
|
|
|
-#include <linux/module.h>
|
|
|
-#include <linux/device.h>
|
|
|
-#include <linux/slab.h>
|
|
|
-#include <linux/of.h>
|
|
|
-#include "bmp085.h"
|
|
|
-#include <linux/interrupt.h>
|
|
|
-#include <linux/completion.h>
|
|
|
-#include <linux/gpio.h>
|
|
|
-
|
|
|
-#define BMP085_CHIP_ID 0x55
|
|
|
-#define BMP085_CALIBRATION_DATA_START 0xAA
|
|
|
-#define BMP085_CALIBRATION_DATA_LENGTH 11 /* 16 bit values */
|
|
|
-#define BMP085_CHIP_ID_REG 0xD0
|
|
|
-#define BMP085_CTRL_REG 0xF4
|
|
|
-#define BMP085_TEMP_MEASUREMENT 0x2E
|
|
|
-#define BMP085_PRESSURE_MEASUREMENT 0x34
|
|
|
-#define BMP085_CONVERSION_REGISTER_MSB 0xF6
|
|
|
-#define BMP085_CONVERSION_REGISTER_LSB 0xF7
|
|
|
-#define BMP085_CONVERSION_REGISTER_XLSB 0xF8
|
|
|
-#define BMP085_TEMP_CONVERSION_TIME 5
|
|
|
-
|
|
|
-struct bmp085_calibration_data {
|
|
|
- s16 AC1, AC2, AC3;
|
|
|
- u16 AC4, AC5, AC6;
|
|
|
- s16 B1, B2;
|
|
|
- s16 MB, MC, MD;
|
|
|
-};
|
|
|
-
|
|
|
-struct bmp085_data {
|
|
|
- struct device *dev;
|
|
|
- struct regmap *regmap;
|
|
|
- struct mutex lock;
|
|
|
- struct bmp085_calibration_data calibration;
|
|
|
- u8 oversampling_setting;
|
|
|
- u32 raw_temperature;
|
|
|
- u32 raw_pressure;
|
|
|
- u32 temp_measurement_period;
|
|
|
- unsigned long last_temp_measurement;
|
|
|
- u8 chip_id;
|
|
|
- s32 b6; /* calculated temperature correction coefficient */
|
|
|
- int irq;
|
|
|
- struct completion done;
|
|
|
-};
|
|
|
-
|
|
|
-static irqreturn_t bmp085_eoc_isr(int irq, void *devid)
|
|
|
-{
|
|
|
- struct bmp085_data *data = devid;
|
|
|
-
|
|
|
- complete(&data->done);
|
|
|
-
|
|
|
- return IRQ_HANDLED;
|
|
|
-}
|
|
|
-
|
|
|
-static s32 bmp085_read_calibration_data(struct bmp085_data *data)
|
|
|
-{
|
|
|
- u16 tmp[BMP085_CALIBRATION_DATA_LENGTH];
|
|
|
- struct bmp085_calibration_data *cali = &(data->calibration);
|
|
|
- s32 status = regmap_bulk_read(data->regmap,
|
|
|
- BMP085_CALIBRATION_DATA_START, (u8 *)tmp,
|
|
|
- (BMP085_CALIBRATION_DATA_LENGTH << 1));
|
|
|
- if (status < 0)
|
|
|
- return status;
|
|
|
-
|
|
|
- cali->AC1 = be16_to_cpu(tmp[0]);
|
|
|
- cali->AC2 = be16_to_cpu(tmp[1]);
|
|
|
- cali->AC3 = be16_to_cpu(tmp[2]);
|
|
|
- cali->AC4 = be16_to_cpu(tmp[3]);
|
|
|
- cali->AC5 = be16_to_cpu(tmp[4]);
|
|
|
- cali->AC6 = be16_to_cpu(tmp[5]);
|
|
|
- cali->B1 = be16_to_cpu(tmp[6]);
|
|
|
- cali->B2 = be16_to_cpu(tmp[7]);
|
|
|
- cali->MB = be16_to_cpu(tmp[8]);
|
|
|
- cali->MC = be16_to_cpu(tmp[9]);
|
|
|
- cali->MD = be16_to_cpu(tmp[10]);
|
|
|
- return 0;
|
|
|
-}
|
|
|
-
|
|
|
-static s32 bmp085_update_raw_temperature(struct bmp085_data *data)
|
|
|
-{
|
|
|
- u16 tmp;
|
|
|
- s32 status;
|
|
|
-
|
|
|
- mutex_lock(&data->lock);
|
|
|
-
|
|
|
- init_completion(&data->done);
|
|
|
-
|
|
|
- status = regmap_write(data->regmap, BMP085_CTRL_REG,
|
|
|
- BMP085_TEMP_MEASUREMENT);
|
|
|
- if (status < 0) {
|
|
|
- dev_err(data->dev,
|
|
|
- "Error while requesting temperature measurement.\n");
|
|
|
- goto exit;
|
|
|
- }
|
|
|
- wait_for_completion_timeout(&data->done, 1 + msecs_to_jiffies(
|
|
|
- BMP085_TEMP_CONVERSION_TIME));
|
|
|
-
|
|
|
- status = regmap_bulk_read(data->regmap, BMP085_CONVERSION_REGISTER_MSB,
|
|
|
- &tmp, sizeof(tmp));
|
|
|
- if (status < 0) {
|
|
|
- dev_err(data->dev,
|
|
|
- "Error while reading temperature measurement result\n");
|
|
|
- goto exit;
|
|
|
- }
|
|
|
- data->raw_temperature = be16_to_cpu(tmp);
|
|
|
- data->last_temp_measurement = jiffies;
|
|
|
- status = 0; /* everything ok, return 0 */
|
|
|
-
|
|
|
-exit:
|
|
|
- mutex_unlock(&data->lock);
|
|
|
- return status;
|
|
|
-}
|
|
|
-
|
|
|
-static s32 bmp085_update_raw_pressure(struct bmp085_data *data)
|
|
|
-{
|
|
|
- u32 tmp = 0;
|
|
|
- s32 status;
|
|
|
-
|
|
|
- mutex_lock(&data->lock);
|
|
|
-
|
|
|
- init_completion(&data->done);
|
|
|
-
|
|
|
- status = regmap_write(data->regmap, BMP085_CTRL_REG,
|
|
|
- BMP085_PRESSURE_MEASUREMENT +
|
|
|
- (data->oversampling_setting << 6));
|
|
|
- if (status < 0) {
|
|
|
- dev_err(data->dev,
|
|
|
- "Error while requesting pressure measurement.\n");
|
|
|
- goto exit;
|
|
|
- }
|
|
|
-
|
|
|
- /* wait for the end of conversion */
|
|
|
- wait_for_completion_timeout(&data->done, 1 + msecs_to_jiffies(
|
|
|
- 2+(3 << data->oversampling_setting)));
|
|
|
- /* copy data into a u32 (4 bytes), but skip the first byte. */
|
|
|
- status = regmap_bulk_read(data->regmap, BMP085_CONVERSION_REGISTER_MSB,
|
|
|
- ((u8 *)&tmp)+1, 3);
|
|
|
- if (status < 0) {
|
|
|
- dev_err(data->dev,
|
|
|
- "Error while reading pressure measurement results\n");
|
|
|
- goto exit;
|
|
|
- }
|
|
|
- data->raw_pressure = be32_to_cpu((tmp));
|
|
|
- data->raw_pressure >>= (8-data->oversampling_setting);
|
|
|
- status = 0; /* everything ok, return 0 */
|
|
|
-
|
|
|
-exit:
|
|
|
- mutex_unlock(&data->lock);
|
|
|
- return status;
|
|
|
-}
|
|
|
-
|
|
|
-/*
|
|
|
- * This function starts the temperature measurement and returns the value
|
|
|
- * in tenth of a degree celsius.
|
|
|
- */
|
|
|
-static s32 bmp085_get_temperature(struct bmp085_data *data, int *temperature)
|
|
|
-{
|
|
|
- struct bmp085_calibration_data *cali = &data->calibration;
|
|
|
- long x1, x2;
|
|
|
- int status;
|
|
|
-
|
|
|
- status = bmp085_update_raw_temperature(data);
|
|
|
- if (status < 0)
|
|
|
- goto exit;
|
|
|
-
|
|
|
- x1 = ((data->raw_temperature - cali->AC6) * cali->AC5) >> 15;
|
|
|
- x2 = (cali->MC << 11) / (x1 + cali->MD);
|
|
|
- data->b6 = x1 + x2 - 4000;
|
|
|
- /* if NULL just update b6. Used for pressure only measurements */
|
|
|
- if (temperature != NULL)
|
|
|
- *temperature = (x1+x2+8) >> 4;
|
|
|
-
|
|
|
-exit:
|
|
|
- return status;
|
|
|
-}
|
|
|
-
|
|
|
-/*
|
|
|
- * This function starts the pressure measurement and returns the value
|
|
|
- * in millibar. Since the pressure depends on the ambient temperature,
|
|
|
- * a temperature measurement is executed according to the given temperature
|
|
|
- * measurement period (default is 1 sec boundary). This period could vary
|
|
|
- * and needs to be adjusted according to the sensor environment, i.e. if big
|
|
|
- * temperature variations then the temperature needs to be read out often.
|
|
|
- */
|
|
|
-static s32 bmp085_get_pressure(struct bmp085_data *data, int *pressure)
|
|
|
-{
|
|
|
- struct bmp085_calibration_data *cali = &data->calibration;
|
|
|
- s32 x1, x2, x3, b3;
|
|
|
- u32 b4, b7;
|
|
|
- s32 p;
|
|
|
- int status;
|
|
|
-
|
|
|
- /* alt least every second force an update of the ambient temperature */
|
|
|
- if ((data->last_temp_measurement == 0) ||
|
|
|
- time_is_before_jiffies(data->last_temp_measurement + 1*HZ)) {
|
|
|
- status = bmp085_get_temperature(data, NULL);
|
|
|
- if (status < 0)
|
|
|
- return status;
|
|
|
- }
|
|
|
-
|
|
|
- status = bmp085_update_raw_pressure(data);
|
|
|
- if (status < 0)
|
|
|
- return status;
|
|
|
-
|
|
|
- x1 = (data->b6 * data->b6) >> 12;
|
|
|
- x1 *= cali->B2;
|
|
|
- x1 >>= 11;
|
|
|
-
|
|
|
- x2 = cali->AC2 * data->b6;
|
|
|
- x2 >>= 11;
|
|
|
-
|
|
|
- x3 = x1 + x2;
|
|
|
-
|
|
|
- b3 = (((((s32)cali->AC1) * 4 + x3) << data->oversampling_setting) + 2);
|
|
|
- b3 >>= 2;
|
|
|
-
|
|
|
- x1 = (cali->AC3 * data->b6) >> 13;
|
|
|
- x2 = (cali->B1 * ((data->b6 * data->b6) >> 12)) >> 16;
|
|
|
- x3 = (x1 + x2 + 2) >> 2;
|
|
|
- b4 = (cali->AC4 * (u32)(x3 + 32768)) >> 15;
|
|
|
-
|
|
|
- b7 = ((u32)data->raw_pressure - b3) *
|
|
|
- (50000 >> data->oversampling_setting);
|
|
|
- p = ((b7 < 0x80000000) ? ((b7 << 1) / b4) : ((b7 / b4) * 2));
|
|
|
-
|
|
|
- x1 = p >> 8;
|
|
|
- x1 *= x1;
|
|
|
- x1 = (x1 * 3038) >> 16;
|
|
|
- x2 = (-7357 * p) >> 16;
|
|
|
- p += (x1 + x2 + 3791) >> 4;
|
|
|
-
|
|
|
- *pressure = p;
|
|
|
-
|
|
|
- return 0;
|
|
|
-}
|
|
|
-
|
|
|
-/*
|
|
|
- * This function sets the chip-internal oversampling. Valid values are 0..3.
|
|
|
- * The chip will use 2^oversampling samples for internal averaging.
|
|
|
- * This influences the measurement time and the accuracy; larger values
|
|
|
- * increase both. The datasheet gives an overview on how measurement time,
|
|
|
- * accuracy and noise correlate.
|
|
|
- */
|
|
|
-static void bmp085_set_oversampling(struct bmp085_data *data,
|
|
|
- unsigned char oversampling)
|
|
|
-{
|
|
|
- if (oversampling > 3)
|
|
|
- oversampling = 3;
|
|
|
- data->oversampling_setting = oversampling;
|
|
|
-}
|
|
|
-
|
|
|
-/*
|
|
|
- * Returns the currently selected oversampling. Range: 0..3
|
|
|
- */
|
|
|
-static unsigned char bmp085_get_oversampling(struct bmp085_data *data)
|
|
|
-{
|
|
|
- return data->oversampling_setting;
|
|
|
-}
|
|
|
-
|
|
|
-/* sysfs callbacks */
|
|
|
-static ssize_t set_oversampling(struct device *dev,
|
|
|
- struct device_attribute *attr,
|
|
|
- const char *buf, size_t count)
|
|
|
-{
|
|
|
- struct bmp085_data *data = dev_get_drvdata(dev);
|
|
|
- unsigned long oversampling;
|
|
|
- int err = kstrtoul(buf, 10, &oversampling);
|
|
|
-
|
|
|
- if (err == 0) {
|
|
|
- mutex_lock(&data->lock);
|
|
|
- bmp085_set_oversampling(data, oversampling);
|
|
|
- mutex_unlock(&data->lock);
|
|
|
- return count;
|
|
|
- }
|
|
|
-
|
|
|
- return err;
|
|
|
-}
|
|
|
-
|
|
|
-static ssize_t show_oversampling(struct device *dev,
|
|
|
- struct device_attribute *attr, char *buf)
|
|
|
-{
|
|
|
- struct bmp085_data *data = dev_get_drvdata(dev);
|
|
|
-
|
|
|
- return sprintf(buf, "%u\n", bmp085_get_oversampling(data));
|
|
|
-}
|
|
|
-static DEVICE_ATTR(oversampling, S_IWUSR | S_IRUGO,
|
|
|
- show_oversampling, set_oversampling);
|
|
|
-
|
|
|
-
|
|
|
-static ssize_t show_temperature(struct device *dev,
|
|
|
- struct device_attribute *attr, char *buf)
|
|
|
-{
|
|
|
- int temperature;
|
|
|
- int status;
|
|
|
- struct bmp085_data *data = dev_get_drvdata(dev);
|
|
|
-
|
|
|
- status = bmp085_get_temperature(data, &temperature);
|
|
|
- if (status < 0)
|
|
|
- return status;
|
|
|
- else
|
|
|
- return sprintf(buf, "%d\n", temperature);
|
|
|
-}
|
|
|
-static DEVICE_ATTR(temp0_input, S_IRUGO, show_temperature, NULL);
|
|
|
-
|
|
|
-
|
|
|
-static ssize_t show_pressure(struct device *dev,
|
|
|
- struct device_attribute *attr, char *buf)
|
|
|
-{
|
|
|
- int pressure;
|
|
|
- int status;
|
|
|
- struct bmp085_data *data = dev_get_drvdata(dev);
|
|
|
-
|
|
|
- status = bmp085_get_pressure(data, &pressure);
|
|
|
- if (status < 0)
|
|
|
- return status;
|
|
|
- else
|
|
|
- return sprintf(buf, "%d\n", pressure);
|
|
|
-}
|
|
|
-static DEVICE_ATTR(pressure0_input, S_IRUGO, show_pressure, NULL);
|
|
|
-
|
|
|
-
|
|
|
-static struct attribute *bmp085_attributes[] = {
|
|
|
- &dev_attr_temp0_input.attr,
|
|
|
- &dev_attr_pressure0_input.attr,
|
|
|
- &dev_attr_oversampling.attr,
|
|
|
- NULL
|
|
|
-};
|
|
|
-
|
|
|
-static const struct attribute_group bmp085_attr_group = {
|
|
|
- .attrs = bmp085_attributes,
|
|
|
-};
|
|
|
-
|
|
|
-int bmp085_detect(struct device *dev)
|
|
|
-{
|
|
|
- struct bmp085_data *data = dev_get_drvdata(dev);
|
|
|
- unsigned int id;
|
|
|
- int ret;
|
|
|
-
|
|
|
- ret = regmap_read(data->regmap, BMP085_CHIP_ID_REG, &id);
|
|
|
- if (ret < 0)
|
|
|
- return ret;
|
|
|
-
|
|
|
- if (id != data->chip_id)
|
|
|
- return -ENODEV;
|
|
|
-
|
|
|
- return 0;
|
|
|
-}
|
|
|
-EXPORT_SYMBOL_GPL(bmp085_detect);
|
|
|
-
|
|
|
-static void bmp085_get_of_properties(struct bmp085_data *data)
|
|
|
-{
|
|
|
-#ifdef CONFIG_OF
|
|
|
- struct device_node *np = data->dev->of_node;
|
|
|
- u32 prop;
|
|
|
-
|
|
|
- if (!np)
|
|
|
- return;
|
|
|
-
|
|
|
- if (!of_property_read_u32(np, "chip-id", &prop))
|
|
|
- data->chip_id = prop & 0xff;
|
|
|
-
|
|
|
- if (!of_property_read_u32(np, "temp-measurement-period", &prop))
|
|
|
- data->temp_measurement_period = (prop/100)*HZ;
|
|
|
-
|
|
|
- if (!of_property_read_u32(np, "default-oversampling", &prop))
|
|
|
- data->oversampling_setting = prop & 0xff;
|
|
|
-#endif
|
|
|
-}
|
|
|
-
|
|
|
-static int bmp085_init_client(struct bmp085_data *data)
|
|
|
-{
|
|
|
- int status = bmp085_read_calibration_data(data);
|
|
|
-
|
|
|
- if (status < 0)
|
|
|
- return status;
|
|
|
-
|
|
|
- /* default settings */
|
|
|
- data->chip_id = BMP085_CHIP_ID;
|
|
|
- data->last_temp_measurement = 0;
|
|
|
- data->temp_measurement_period = 1*HZ;
|
|
|
- data->oversampling_setting = 3;
|
|
|
-
|
|
|
- bmp085_get_of_properties(data);
|
|
|
-
|
|
|
- mutex_init(&data->lock);
|
|
|
-
|
|
|
- return 0;
|
|
|
-}
|
|
|
-
|
|
|
-struct regmap_config bmp085_regmap_config = {
|
|
|
- .reg_bits = 8,
|
|
|
- .val_bits = 8
|
|
|
-};
|
|
|
-EXPORT_SYMBOL_GPL(bmp085_regmap_config);
|
|
|
-
|
|
|
-int bmp085_probe(struct device *dev, struct regmap *regmap, int irq)
|
|
|
-{
|
|
|
- struct bmp085_data *data;
|
|
|
- int err = 0;
|
|
|
-
|
|
|
- data = kzalloc(sizeof(struct bmp085_data), GFP_KERNEL);
|
|
|
- if (!data) {
|
|
|
- err = -ENOMEM;
|
|
|
- goto exit;
|
|
|
- }
|
|
|
-
|
|
|
- dev_set_drvdata(dev, data);
|
|
|
- data->dev = dev;
|
|
|
- data->regmap = regmap;
|
|
|
- data->irq = irq;
|
|
|
-
|
|
|
- if (data->irq > 0) {
|
|
|
- err = devm_request_irq(dev, data->irq, bmp085_eoc_isr,
|
|
|
- IRQF_TRIGGER_RISING, "bmp085",
|
|
|
- data);
|
|
|
- if (err < 0)
|
|
|
- goto exit_free;
|
|
|
- }
|
|
|
-
|
|
|
- /* Initialize the BMP085 chip */
|
|
|
- err = bmp085_init_client(data);
|
|
|
- if (err < 0)
|
|
|
- goto exit_free;
|
|
|
-
|
|
|
- err = bmp085_detect(dev);
|
|
|
- if (err < 0) {
|
|
|
- dev_err(dev, "%s: chip_id failed!\n", BMP085_NAME);
|
|
|
- goto exit_free;
|
|
|
- }
|
|
|
-
|
|
|
- /* Register sysfs hooks */
|
|
|
- err = sysfs_create_group(&dev->kobj, &bmp085_attr_group);
|
|
|
- if (err)
|
|
|
- goto exit_free;
|
|
|
-
|
|
|
- dev_info(dev, "Successfully initialized %s!\n", BMP085_NAME);
|
|
|
-
|
|
|
- return 0;
|
|
|
-
|
|
|
-exit_free:
|
|
|
- kfree(data);
|
|
|
-exit:
|
|
|
- return err;
|
|
|
-}
|
|
|
-EXPORT_SYMBOL_GPL(bmp085_probe);
|
|
|
-
|
|
|
-int bmp085_remove(struct device *dev)
|
|
|
-{
|
|
|
- struct bmp085_data *data = dev_get_drvdata(dev);
|
|
|
-
|
|
|
- sysfs_remove_group(&data->dev->kobj, &bmp085_attr_group);
|
|
|
- kfree(data);
|
|
|
-
|
|
|
- return 0;
|
|
|
-}
|
|
|
-EXPORT_SYMBOL_GPL(bmp085_remove);
|
|
|
-
|
|
|
-MODULE_AUTHOR("Christoph Mair <christoph.mair@gmail.com>");
|
|
|
-MODULE_DESCRIPTION("BMP085 driver");
|
|
|
-MODULE_LICENSE("GPL");
|
Linus Walleij