Merge branch 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus

Pull MIPS updates from Ralf Baechle:
 - three fixes for 3.15 that didn't make it in time
 - limited Octeon 3 support.
 - paravirtualization support
 - improvment to platform support for Netlogix SOCs.
 - add support for powering down the Malta eval board in software
 - add many instructions to the in-kernel microassembler.
 - add support for the BPF JIT.
 - minor cleanups of the BCM47xx code.
 - large cleanup of math emu code resulting in significant code size
   reduction, better readability of the code and more accurate
   emulation.
 - improvments to the MIPS CPS code.
 - support C3 power status for the R4k count/compare clock device.
 - improvments to the GIO support for older SGI workstations.
 - increase number of supported CPUs to 256; this can be reached on
   certain embedded multithreaded ccNUMA configurations.
 - various small cleanups, updates and fixes

* 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus: (173 commits)
  MIPS: IP22/IP28: Improve GIO support
  MIPS: Octeon: Add twsi interrupt initialization for OCTEON 3XXX, 5XXX, 63XX
  DEC: Document the R4k MB ASIC mini interrupt controller
  DEC: Add self as the maintainer
  MIPS: Add microMIPS MSA support.
  MIPS: Replace calls to obsolete strict_strto call with kstrto* equivalents.
  MIPS: Replace obsolete strict_strto call with kstrto
  MIPS: BFP: Simplify code slightly.
  MIPS: Call find_vma with the mmap_sem held
  MIPS: Fix 'write_msa_##' inline macro.
  MIPS: Fix MSA toolchain support detection.
  mips: Update the email address of Geert Uytterhoeven
  MIPS: Add minimal defconfig for mips_paravirt
  MIPS: Enable build for new system 'paravirt'
  MIPS: paravirt: Add pci controller for virtio
  MIPS: Add code for new system 'paravirt'
  MIPS: Add functions for hypervisor call
  MIPS: OCTEON: Add OCTEON3 to __get_cpu_type
  MIPS: Add function get_ebase_cpunum
  MIPS: Add minimal support for OCTEON3 to c-r4k.c
  ...

MAINTAINERS

@@ -2700,6 +2700,15 @@ S:	Orphan
 F:	Documentation/networking/decnet.txt
 F:	net/decnet/
 
+DECSTATION PLATFORM SUPPORT
+M:	"Maciej W. Rozycki" <macro@linux-mips.org>
+L:	linux-mips@linux-mips.org
+W:	http://www.linux-mips.org/wiki/DECstation
+S:	Maintained
+F:	arch/mips/dec/
+F:	arch/mips/include/asm/dec/
+F:	arch/mips/include/asm/mach-dec/
+
 DEFXX FDDI NETWORK DRIVER
 M:	"Maciej W. Rozycki" <macro@linux-mips.org>
 S:	Maintained

arch/mips/Kbuild

@@ -16,7 +16,7 @@ obj- := $(platform-)
 
 obj-y += kernel/
 obj-y += mm/
-obj-y += math-emu/
+obj-y += net/
 
 ifdef CONFIG_KVM
 obj-y += kvm/

arch/mips/Kbuild.platforms

@@ -18,6 +18,7 @@ platforms += loongson1
 platforms += mti-malta
 platforms += mti-sead3
 platforms += netlogic
+platforms += paravirt
 platforms += pmcs-msp71xx
 platforms += pnx833x
 platforms += ralink

arch/mips/Kconfig

@@ -12,6 +12,7 @@ config MIPS
 	select HAVE_ARCH_KGDB
 	select HAVE_ARCH_SECCOMP_FILTER
 	select HAVE_ARCH_TRACEHOOK
+	select HAVE_BPF_JIT if !CPU_MICROMIPS
 	select ARCH_HAVE_CUSTOM_GPIO_H
 	select HAVE_FUNCTION_TRACER
 	select HAVE_FUNCTION_TRACE_MCOUNT_TEST
@@ -50,6 +51,8 @@ config MIPS
 	select CLONE_BACKWARDS
 	select HAVE_DEBUG_STACKOVERFLOW
 	select HAVE_CC_STACKPROTECTOR
+	select CPU_PM if CPU_IDLE
+	select ARCH_HAS_TICK_BROADCAST if GENERIC_CLOCKEVENTS_BROADCAST
 
 menu "Machine selection"
 
@@ -83,6 +86,7 @@ config AR7
 	select SYS_HAS_EARLY_PRINTK
 	select SYS_SUPPORTS_32BIT_KERNEL
 	select SYS_SUPPORTS_LITTLE_ENDIAN
+	select SYS_SUPPORTS_MIPS16
 	select SYS_SUPPORTS_ZBOOT_UART16550
 	select ARCH_REQUIRE_GPIOLIB
 	select VLYNQ
@@ -106,6 +110,7 @@ config ATH79
 	select SYS_HAS_EARLY_PRINTK
 	select SYS_SUPPORTS_32BIT_KERNEL
 	select SYS_SUPPORTS_BIG_ENDIAN
+	select SYS_SUPPORTS_MIPS16
 	help
 	  Support for the Atheros AR71XX/AR724X/AR913X SoCs.
 
@@ -122,6 +127,7 @@ config BCM47XX
 	select NO_EXCEPT_FILL
 	select SYS_SUPPORTS_32BIT_KERNEL
 	select SYS_SUPPORTS_LITTLE_ENDIAN
+	select SYS_SUPPORTS_MIPS16
 	select SYS_HAS_EARLY_PRINTK
 	select USE_GENERIC_EARLY_PRINTK_8250
 	help
@@ -168,9 +174,9 @@ config MACH_DECSTATION
 	bool "DECstations"
 	select BOOT_ELF32
 	select CEVT_DS1287
-	select CEVT_R4K
+	select CEVT_R4K if CPU_R4X00
 	select CSRC_IOASIC
-	select CSRC_R4K
+	select CSRC_R4K if CPU_R4X00
 	select CPU_DADDI_WORKAROUNDS if 64BIT
 	select CPU_R4000_WORKAROUNDS if 64BIT
 	select CPU_R4400_WORKAROUNDS if 64BIT
@@ -248,6 +254,7 @@ config LANTIQ
 	select SYS_HAS_CPU_MIPS32_R2
 	select SYS_SUPPORTS_BIG_ENDIAN
 	select SYS_SUPPORTS_32BIT_KERNEL
+	select SYS_SUPPORTS_MIPS16
 	select SYS_SUPPORTS_MULTITHREADING
 	select SYS_HAS_EARLY_PRINTK
 	select ARCH_REQUIRE_GPIOLIB
@@ -330,6 +337,7 @@ config MIPS_MALTA
 	select SYS_SUPPORTS_LITTLE_ENDIAN
 	select SYS_SUPPORTS_MIPS_CMP
 	select SYS_SUPPORTS_MIPS_CPS
+	select SYS_SUPPORTS_MIPS16
 	select SYS_SUPPORTS_MULTITHREADING
 	select SYS_SUPPORTS_SMARTMIPS
 	select SYS_SUPPORTS_ZBOOT
@@ -361,6 +369,7 @@ config MIPS_SEAD3
 	select SYS_SUPPORTS_LITTLE_ENDIAN
 	select SYS_SUPPORTS_SMARTMIPS
 	select SYS_SUPPORTS_MICROMIPS
+	select SYS_SUPPORTS_MIPS16
 	select USB_EHCI_BIG_ENDIAN_DESC
 	select USB_EHCI_BIG_ENDIAN_MMIO
 	select USE_OF
@@ -380,6 +389,7 @@ config MACH_VR41XX
 	select CEVT_R4K
 	select CSRC_R4K
 	select SYS_HAS_CPU_VR41XX
+	select SYS_SUPPORTS_MIPS16
 	select ARCH_REQUIRE_GPIOLIB
 
 config NXP_STB220
@@ -407,6 +417,7 @@ config PMC_MSP
 	select SYS_HAS_CPU_MIPS32_R2
 	select SYS_SUPPORTS_32BIT_KERNEL
 	select SYS_SUPPORTS_BIG_ENDIAN
+	select SYS_SUPPORTS_MIPS16
 	select IRQ_CPU
 	select SERIAL_8250
 	select SERIAL_8250_CONSOLE
@@ -430,6 +441,7 @@ config RALINK
 	select SYS_HAS_CPU_MIPS32_R2
 	select SYS_SUPPORTS_32BIT_KERNEL
 	select SYS_SUPPORTS_LITTLE_ENDIAN
+	select SYS_SUPPORTS_MIPS16
 	select SYS_HAS_EARLY_PRINTK
 	select HAVE_MACH_CLKDEV
 	select CLKDEV_LOOKUP
@@ -674,7 +686,6 @@ config SNI_RM
 	select SYS_SUPPORTS_BIG_ENDIAN
 	select SYS_SUPPORTS_HIGHMEM
 	select SYS_SUPPORTS_LITTLE_ENDIAN
-	select USE_GENERIC_EARLY_PRINTK_8250
 	help
 	  The SNI RM200/300/400 are MIPS-based machines manufactured by
 	  Siemens Nixdorf Informationssysteme (SNI), parent company of Pyramid
@@ -721,6 +732,11 @@ config CAVIUM_OCTEON_SOC
 	select ZONE_DMA32
 	select HOLES_IN_ZONE
 	select ARCH_REQUIRE_GPIOLIB
+	select LIBFDT
+	select USE_OF
+	select ARCH_SPARSEMEM_ENABLE
+	select SYS_SUPPORTS_SMP
+	select NR_CPUS_DEFAULT_16
 	help
 	  This option supports all of the Octeon reference boards from Cavium
 	  Networks. It builds a kernel that dynamically determines the Octeon
@@ -789,6 +805,25 @@ config NLM_XLP_BOARD
 	  This board is based on Netlogic XLP Processor.
 	  Say Y here if you have a XLP based board.
 
+config MIPS_PARAVIRT
+	bool "Para-Virtualized guest system"
+	select CEVT_R4K
+	select CSRC_R4K
+	select DMA_COHERENT
+	select SYS_SUPPORTS_64BIT_KERNEL
+	select SYS_SUPPORTS_32BIT_KERNEL
+	select SYS_SUPPORTS_BIG_ENDIAN
+	select SYS_SUPPORTS_SMP
+	select NR_CPUS_DEFAULT_4
+	select SYS_HAS_EARLY_PRINTK
+	select SYS_HAS_CPU_MIPS32_R2
+	select SYS_HAS_CPU_MIPS64_R2
+	select SYS_HAS_CPU_CAVIUM_OCTEON
+	select HW_HAS_PCI
+	select SWAP_IO_SPACE
+	help
+	  This option supports guest running under ????
+
 endchoice
 
 source "arch/mips/alchemy/Kconfig"
@@ -809,6 +844,7 @@ source "arch/mips/cavium-octeon/Kconfig"
 source "arch/mips/loongson/Kconfig"
 source "arch/mips/loongson1/Kconfig"
 source "arch/mips/netlogic/Kconfig"
+source "arch/mips/paravirt/Kconfig"
 
 endmenu
 
@@ -1059,6 +1095,7 @@ config SOC_PNX833X
 	select SYS_SUPPORTS_32BIT_KERNEL
 	select SYS_SUPPORTS_LITTLE_ENDIAN
 	select SYS_SUPPORTS_BIG_ENDIAN
+	select SYS_SUPPORTS_MIPS16
 	select CPU_MIPSR2_IRQ_VI
 
 config SOC_PNX8335
@@ -1398,16 +1435,11 @@ config CPU_SB1
 config CPU_CAVIUM_OCTEON
 	bool "Cavium Octeon processor"
 	depends on SYS_HAS_CPU_CAVIUM_OCTEON
-	select ARCH_SPARSEMEM_ENABLE
 	select CPU_HAS_PREFETCH
 	select CPU_SUPPORTS_64BIT_KERNEL
-	select SYS_SUPPORTS_SMP
-	select NR_CPUS_DEFAULT_16
 	select WEAK_ORDERING
 	select CPU_SUPPORTS_HIGHMEM
 	select CPU_SUPPORTS_HUGEPAGES
-	select LIBFDT
-	select USE_OF
 	select USB_EHCI_BIG_ENDIAN_MMIO
 	select MIPS_L1_CACHE_SHIFT_7
 	help
@@ -1659,6 +1691,12 @@ config SYS_HAS_CPU_XLR
 config SYS_HAS_CPU_XLP
 	bool
 
+config MIPS_MALTA_PM
+	depends on MIPS_MALTA
+	depends on PCI
+	bool
+	default y
+
 #
 # CPU may reorder R->R, R->W, W->R, W->W
 # Reordering beyond LL and SC is handled in WEAK_REORDERING_BEYOND_LLSC
@@ -1842,7 +1880,7 @@ config FORCE_MAX_ZONEORDER
 
 config CEVT_GIC
 	bool "Use GIC global counter for clock events"
-	depends on IRQ_GIC && !(MIPS_SEAD3 || MIPS_MT_SMTC)
+	depends on IRQ_GIC && !MIPS_SEAD3
 	help
 	  Use the GIC global counter for the clock events. The R4K clock
 	  event driver is always present, so if the platform ends up not
@@ -1895,19 +1933,8 @@ config CPU_R4K_CACHE_TLB
 	bool
 	default y if !(CPU_R3000 || CPU_R8000 || CPU_SB1 || CPU_TX39XX || CPU_CAVIUM_OCTEON)
 
-choice
-	prompt "MIPS MT options"
-
-config MIPS_MT_DISABLED
-	bool "Disable multithreading support"
-	help
-	  Use this option if your platform does not support the MT ASE
-	  which is hardware multithreading support. On systems without
-	  an MT-enabled processor, this will be the only option that is
-	  available in this menu.
-
 config MIPS_MT_SMP
-	bool "Use 1 TC on each available VPE for SMP"
+	bool "MIPS MT SMP support (1 TC on each available VPE)"
 	depends on SYS_SUPPORTS_MULTITHREADING
 	select CPU_MIPSR2_IRQ_VI
 	select CPU_MIPSR2_IRQ_EI
@@ -1926,26 +1953,6 @@ config MIPS_MT_SMP
 	  Intel Hyperthreading feature. For further information go to
 	  <http://www.imgtec.com/mips/mips-multithreading.asp>.
 
-config MIPS_MT_SMTC
-	bool "Use all TCs on all VPEs for SMP (DEPRECATED)"
-	depends on CPU_MIPS32_R2
-	depends on SYS_SUPPORTS_MULTITHREADING
-	depends on !MIPS_CPS
-	select CPU_MIPSR2_IRQ_VI
-	select CPU_MIPSR2_IRQ_EI
-	select MIPS_MT
-	select SMP
-	select SMP_UP
-	select SYS_SUPPORTS_SMP
-	select NR_CPUS_DEFAULT_8
-	help
-	  This is a kernel model which is known as SMTC. This is
-	  supported on cores with the MT ASE and presents all TCs
-	  available on all VPEs to support SMP. For further
-	  information see <http://www.linux-mips.org/wiki/34K#SMTC>.
-
-endchoice
-
 config MIPS_MT
 	bool
 
@@ -1967,7 +1974,7 @@ config SYS_SUPPORTS_MULTITHREADING
 config MIPS_MT_FPAFF
 	bool "Dynamic FPU affinity for FP-intensive threads"
 	default y
-	depends on MIPS_MT_SMP || MIPS_MT_SMTC
+	depends on MIPS_MT_SMP
 
 config MIPS_VPE_LOADER
 	bool "VPE loader support."
@@ -1989,29 +1996,6 @@ config MIPS_VPE_LOADER_MT
 	default "y"
 	depends on MIPS_VPE_LOADER && !MIPS_CMP
 
-config MIPS_MT_SMTC_IM_BACKSTOP
-	bool "Use per-TC register bits as backstop for inhibited IM bits"
-	depends on MIPS_MT_SMTC
-	default n
-	help
-	  To support multiple TC microthreads acting as "CPUs" within
-	  a VPE, VPE-wide interrupt mask bits must be specially manipulated
-	  during interrupt handling. To support legacy drivers and interrupt
-	  controller management code, SMTC has a "backstop" to track and
-	  if necessary restore the interrupt mask. This has some performance
-	  impact on interrupt service overhead.
-
-config MIPS_MT_SMTC_IRQAFF
-	bool "Support IRQ affinity API"
-	depends on MIPS_MT_SMTC
-	default n
-	help
-	  Enables SMP IRQ affinity API (/proc/irq/*/smp_affinity, etc.)
-	  for SMTC Linux kernel. Requires platform support, of which
-	  an example can be found in the MIPS kernel i8259 and Malta
-	  platform code.  Adds some overhead to interrupt dispatch, and
-	  should be used only if you know what you are doing.
-
 config MIPS_VPE_LOADER_TOM
 	bool "Load VPE program into memory hidden from linux"
 	depends on MIPS_VPE_LOADER
@@ -2039,7 +2023,7 @@ config MIPS_VPE_APSP_API_MT
 
 config MIPS_CMP
 	bool "MIPS CMP framework support (DEPRECATED)"
-	depends on SYS_SUPPORTS_MIPS_CMP && !MIPS_MT_SMTC
+	depends on SYS_SUPPORTS_MIPS_CMP
 	select MIPS_GIC_IPI
 	select SYNC_R4K
 	select WEAK_ORDERING
@@ -2057,9 +2041,11 @@ config MIPS_CPS
 	depends on SYS_SUPPORTS_MIPS_CPS
 	select MIPS_CM
 	select MIPS_CPC
+	select MIPS_CPS_PM if HOTPLUG_CPU
 	select MIPS_GIC_IPI
 	select SMP
 	select SYNC_R4K if (CEVT_R4K || CSRC_R4K)
+	select SYS_SUPPORTS_HOTPLUG_CPU
 	select SYS_SUPPORTS_SMP
 	select WEAK_ORDERING
 	help
@@ -2069,6 +2055,9 @@ config MIPS_CPS
 	  no external assistance. It is safe to enable this when hardware
 	  support is unavailable.
 
+config MIPS_CPS_PM
+	bool
+
 config MIPS_GIC_IPI
 	bool
 
@@ -2199,6 +2188,13 @@ config SYS_SUPPORTS_SMARTMIPS
 config SYS_SUPPORTS_MICROMIPS
 	bool
 
+config SYS_SUPPORTS_MIPS16
+	bool
+	help
+	  This option must be set if a kernel might be executed on a MIPS16-
+	  enabled CPU even if MIPS16 is not actually being used.  In other
+	  words, it makes the kernel MIPS16-tolerant.
+
 config CPU_SUPPORTS_MSA
 	bool
 
@@ -2239,7 +2235,7 @@ config NODES_SHIFT
 
 config HW_PERF_EVENTS
 	bool "Enable hardware performance counter support for perf events"
-	depends on PERF_EVENTS && !MIPS_MT_SMTC && OPROFILE=n && (CPU_MIPS32 || CPU_MIPS64 || CPU_R10000 || CPU_SB1 || CPU_CAVIUM_OCTEON || CPU_XLP)
+	depends on PERF_EVENTS && OPROFILE=n && (CPU_MIPS32 || CPU_MIPS64 || CPU_R10000 || CPU_SB1 || CPU_CAVIUM_OCTEON || CPU_XLP)
 	default y
 	help
 	  Enable hardware performance counter support for perf events. If
@@ -2297,8 +2293,8 @@ config NR_CPUS_DEFAULT_64
 	bool
 
 config NR_CPUS
-	int "Maximum number of CPUs (2-64)"
-	range 2 64
+	int "Maximum number of CPUs (2-256)"
+	range 2 256
 	depends on SMP
 	default "4" if NR_CPUS_DEFAULT_4
 	default "8" if NR_CPUS_DEFAULT_8
@@ -2671,12 +2667,16 @@ endmenu
 config MIPS_EXTERNAL_TIMER
 	bool
 
-if CPU_SUPPORTS_CPUFREQ && MIPS_EXTERNAL_TIMER
 menu "CPU Power Management"
+
+if CPU_SUPPORTS_CPUFREQ && MIPS_EXTERNAL_TIMER
 source "drivers/cpufreq/Kconfig"
-endmenu
 endif
 
+source "drivers/cpuidle/Kconfig"
+
+endmenu
+
 source "net/Kconfig"
 
 source "drivers/Kconfig"

arch/mips/Kconfig.debug

@@ -79,15 +79,6 @@ config CMDLINE_OVERRIDE
 
 	  Normally, you will choose 'N' here.
 
-config SMTC_IDLE_HOOK_DEBUG
-	bool "Enable additional debug checks before going into CPU idle loop"
-	depends on DEBUG_KERNEL && MIPS_MT_SMTC
-	help
-	  This option enables Enable additional debug checks before going into
-	  CPU idle loop.  For details on these checks, see
-	  arch/mips/kernel/smtc.c.  This debugging option result in significant
-	  overhead so should be disabled in production kernels.
-
 config SB1XXX_CORELIS
 	bool "Corelis Debugger"
 	depends on SIBYTE_SB1xxx_SOC

arch/mips/Makefile

@@ -120,7 +120,7 @@ cflags-$(CONFIG_SB1XXX_CORELIS)	+= $(call cc-option,-mno-sched-prolog) \
 				   -fno-omit-frame-pointer
 
 ifeq ($(CONFIG_CPU_HAS_MSA),y)
-toolchain-msa			:= $(call cc-option-yn,-mhard-float -mfp64 -mmsa)
+toolchain-msa	:= $(call cc-option-yn,-mhard-float -mfp64 -Wa$(comma)-mmsa)
 cflags-$(toolchain-msa)		+= -DTOOLCHAIN_SUPPORTS_MSA
 endif
 
@@ -251,6 +251,7 @@ OBJCOPYFLAGS		+= --remove-section=.reginfo
 head-y := arch/mips/kernel/head.o
 
 libs-y			+= arch/mips/lib/
+libs-y			+= arch/mips/math-emu/
 
 # See arch/mips/Kbuild for content of core part of the kernel
 core-y += arch/mips/

arch/mips/alchemy/board-xxs1500.c

@@ -49,7 +49,7 @@ void __init prom_init(void)
 	prom_init_cmdline();
 
 	memsize_str = prom_getenv("memsize");
-	if (!memsize_str || strict_strtoul(memsize_str, 0, &memsize))
+	if (!memsize_str || kstrtoul(memsize_str, 0, &memsize))
 		memsize = 0x04000000;
 
 	add_memory_region(0, memsize, BOOT_MEM_RAM);

arch/mips/alchemy/common/setup.c

@@ -67,6 +67,12 @@ void __init plat_mem_setup(void)
 	case ALCHEMY_CPU_AU1500:
 	case ALCHEMY_CPU_AU1100:
 		coherentio = 0;
+		break;
+	case ALCHEMY_CPU_AU1200:
+		/* Au1200 AB USB does not support coherent memory */
+		if (0 == (read_c0_prid() & PRID_REV_MASK))
+			coherentio = 0;
+		break;
 	}
 
 	board_setup();	/* board specific setup */

arch/mips/alchemy/common/usb.c

@@ -355,47 +355,25 @@ static inline void __au1200_udc_control(void __iomem *base, int enable)
 	}
 }
 
-static inline int au1200_coherency_bug(void)
-{
-#if defined(CONFIG_DMA_COHERENT)
-	/* Au1200 AB USB does not support coherent memory */
-	if (!(read_c0_prid() & PRID_REV_MASK)) {
-		printk(KERN_INFO "Au1200 USB: this is chip revision AB !!\n");
-		printk(KERN_INFO "Au1200 USB: update your board or re-configure"
-				 " the kernel\n");
-		return -ENODEV;
-	}
-#endif
-	return 0;
-}
-
 static inline int au1200_usb_control(int block, int enable)
 {
 	void __iomem *base =
 			(void __iomem *)KSEG1ADDR(AU1200_USB_CTL_PHYS_ADDR);
-	int ret = 0;
 
 	switch (block) {
 	case ALCHEMY_USB_OHCI0:
-		ret = au1200_coherency_bug();
-		if (ret && enable)
-			goto out;
 		__au1200_ohci_control(base, enable);
 		break;
 	case ALCHEMY_USB_UDC0:
 		__au1200_udc_control(base, enable);
 		break;
 	case ALCHEMY_USB_EHCI0:
-		ret = au1200_coherency_bug();
-		if (ret && enable)
-			goto out;
 		__au1200_ehci_control(base, enable);
 		break;
 	default:
-		ret = -ENODEV;
+		return -ENODEV;
 	}
-out:
-	return ret;
+	return 0;
 }
 
 

arch/mips/alchemy/devboards/pm.c

@@ -158,7 +158,7 @@ static ssize_t db1x_pmattr_store(struct kobject *kobj,
 	int tmp;
 
 	if (ATTRCMP(timer_timeout)) {
-		tmp = strict_strtoul(instr, 0, &l);
+		tmp = kstrtoul(instr, 0, &l);
 		if (tmp)
 			return tmp;
 
@@ -181,7 +181,7 @@ static ssize_t db1x_pmattr_store(struct kobject *kobj,
 		}
 
 	} else if (ATTRCMP(wakemsk)) {
-		tmp = strict_strtoul(instr, 0, &l);
+		tmp = kstrtoul(instr, 0, &l);
 		if (tmp)
 			return tmp;
 

arch/mips/bcm47xx/prom.c

@@ -69,15 +69,18 @@ static __init void prom_init_mem(void)
 	 * BCM47XX uses 128MB for addressing the ram, if the system contains
 	 * less that that amount of ram it remaps the ram more often into the
 	 * available space.
-	 * Accessing memory after 128MB will cause an exception.
-	 * max contains the biggest possible address supported by the platform.
-	 * If the method wants to try something above we assume 128MB ram.
 	 */
-	off = (unsigned long)prom_init;
-	max = off | ((128 << 20) - 1);
-	for (mem = (1 << 20); mem < (128 << 20); mem += (1 << 20)) {
-		if ((off + mem) > max) {
-			mem = (128 << 20);
+
+	/* Physical address, without mapping to any kernel segment */
+	off = CPHYSADDR((unsigned long)prom_init);
+
+	/* Accessing memory after 128 MiB will cause an exception */
+	max = 128 << 20;
+
+	for (mem = 1 << 20; mem < max; mem += 1 << 20) {
+		/* Loop condition may be not enough, off may be over 1 MiB */
+		if (off + mem >= max) {
+			mem = max;
 			printk(KERN_DEBUG "assume 128MB RAM\n");
 			break;
 		}

arch/mips/cavium-octeon/Kconfig

@@ -10,6 +10,17 @@ config CAVIUM_CN63XXP1
 	  non-CN63XXP1 hardware, so it is recommended to select "n"
 	  unless it is known the workarounds are needed.
 
+config CAVIUM_OCTEON_CVMSEG_SIZE
+	int "Number of L1 cache lines reserved for CVMSEG memory"
+	range 0 54
+	default 1
+	help
+	  CVMSEG LM is a segment that accesses portions of the dcache as a
+	  local memory; the larger CVMSEG is, the smaller the cache is.
+	  This selects the size of CVMSEG LM, which is in cache blocks. The
+	  legally range is from zero to 54 cache blocks (i.e. CVMSEG LM is
+	  between zero and 6192 bytes).
+
 endif # CPU_CAVIUM_OCTEON
 
 if CAVIUM_OCTEON_SOC
@@ -23,17 +34,6 @@ config CAVIUM_OCTEON_2ND_KERNEL
 	  with this option to be run at the same time as one built without this
 	  option.
 
-config CAVIUM_OCTEON_CVMSEG_SIZE
-	int "Number of L1 cache lines reserved for CVMSEG memory"
-	range 0 54
-	default 1
-	help
-	  CVMSEG LM is a segment that accesses portions of the dcache as a
-	  local memory; the larger CVMSEG is, the smaller the cache is.
-	  This selects the size of CVMSEG LM, which is in cache blocks. The
-	  legally range is from zero to 54 cache blocks (i.e. CVMSEG LM is
-	  between zero and 6192 bytes).
-
 config CAVIUM_OCTEON_LOCK_L2
 	bool "Lock often used kernel code in the L2"
 	default "y"
@@ -86,7 +86,6 @@ config SWIOTLB
 	select IOMMU_HELPER
 	select NEED_SG_DMA_LENGTH
 
-
 config OCTEON_ILM
 	tristate "Module to measure interrupt latency using Octeon CIU Timer"
 	help

arch/mips/cavium-octeon/executive/cvmx-helper.c

@@ -105,6 +105,158 @@ int cvmx_helper_ports_on_interface(int interface)
 }
 EXPORT_SYMBOL_GPL(cvmx_helper_ports_on_interface);
 
+/**
+ * @INTERNAL
+ * Return interface mode for CN68xx.
+ */
+static cvmx_helper_interface_mode_t __cvmx_get_mode_cn68xx(int interface)
+{
+	union cvmx_mio_qlmx_cfg qlm_cfg;
+	switch (interface) {
+	case 0:
+		qlm_cfg.u64 = cvmx_read_csr(CVMX_MIO_QLMX_CFG(0));
+		/* QLM is disabled when QLM SPD is 15. */
+		if (qlm_cfg.s.qlm_spd == 15)
+			return CVMX_HELPER_INTERFACE_MODE_DISABLED;
+
+		if (qlm_cfg.s.qlm_cfg == 2)
+			return CVMX_HELPER_INTERFACE_MODE_SGMII;
+		else if (qlm_cfg.s.qlm_cfg == 3)
+			return CVMX_HELPER_INTERFACE_MODE_XAUI;
+		else
+			return CVMX_HELPER_INTERFACE_MODE_DISABLED;
+	case 2:
+	case 3:
+	case 4:
+		qlm_cfg.u64 = cvmx_read_csr(CVMX_MIO_QLMX_CFG(interface));
+		/* QLM is disabled when QLM SPD is 15. */
+		if (qlm_cfg.s.qlm_spd == 15)
+			return CVMX_HELPER_INTERFACE_MODE_DISABLED;
+
+		if (qlm_cfg.s.qlm_cfg == 2)
+			return CVMX_HELPER_INTERFACE_MODE_SGMII;
+		else if (qlm_cfg.s.qlm_cfg == 3)
+			return CVMX_HELPER_INTERFACE_MODE_XAUI;
+		else
+			return CVMX_HELPER_INTERFACE_MODE_DISABLED;
+	case 7:
+		qlm_cfg.u64 = cvmx_read_csr(CVMX_MIO_QLMX_CFG(3));
+		/* QLM is disabled when QLM SPD is 15. */
+		if (qlm_cfg.s.qlm_spd == 15) {
+			return CVMX_HELPER_INTERFACE_MODE_DISABLED;
+		} else if (qlm_cfg.s.qlm_cfg != 0) {
+			qlm_cfg.u64 = cvmx_read_csr(CVMX_MIO_QLMX_CFG(1));
+			if (qlm_cfg.s.qlm_cfg != 0)
+				return CVMX_HELPER_INTERFACE_MODE_DISABLED;
+		}
+		return CVMX_HELPER_INTERFACE_MODE_NPI;
+	case 8:
+		return CVMX_HELPER_INTERFACE_MODE_LOOP;
+	default:
+		return CVMX_HELPER_INTERFACE_MODE_DISABLED;
+	}
+}
+
+/**
+ * @INTERNAL
+ * Return interface mode for an Octeon II
+ */
+static cvmx_helper_interface_mode_t __cvmx_get_mode_octeon2(int interface)
+{
+	union cvmx_gmxx_inf_mode mode;
+
+	if (OCTEON_IS_MODEL(OCTEON_CN68XX))
+		return __cvmx_get_mode_cn68xx(interface);
+
+	if (interface == 2)
+		return CVMX_HELPER_INTERFACE_MODE_NPI;
+
+	if (interface == 3)
+		return CVMX_HELPER_INTERFACE_MODE_LOOP;
+
+	/* Only present in CN63XX & CN66XX Octeon model */
+	if ((OCTEON_IS_MODEL(OCTEON_CN63XX) &&
+	     (interface == 4 || interface == 5)) ||
+	    (OCTEON_IS_MODEL(OCTEON_CN66XX) &&
+	     interface >= 4 && interface <= 7)) {
+		return CVMX_HELPER_INTERFACE_MODE_DISABLED;
+	}
+
+	if (OCTEON_IS_MODEL(OCTEON_CN66XX)) {
+		union cvmx_mio_qlmx_cfg mio_qlm_cfg;
+
+		/* QLM2 is SGMII0 and QLM1 is SGMII1 */
+		if (interface == 0)
+			mio_qlm_cfg.u64 = cvmx_read_csr(CVMX_MIO_QLMX_CFG(2));
+		else if (interface == 1)
+			mio_qlm_cfg.u64 = cvmx_read_csr(CVMX_MIO_QLMX_CFG(1));
+		else
+			return CVMX_HELPER_INTERFACE_MODE_DISABLED;
+
+		if (mio_qlm_cfg.s.qlm_spd == 15)
+			return CVMX_HELPER_INTERFACE_MODE_DISABLED;
+
+		if (mio_qlm_cfg.s.qlm_cfg == 9)
+			return CVMX_HELPER_INTERFACE_MODE_SGMII;
+		else if (mio_qlm_cfg.s.qlm_cfg == 11)
+			return CVMX_HELPER_INTERFACE_MODE_XAUI;
+		else
+			return CVMX_HELPER_INTERFACE_MODE_DISABLED;
+	} else if (OCTEON_IS_MODEL(OCTEON_CN61XX)) {
+		union cvmx_mio_qlmx_cfg qlm_cfg;
+
+		if (interface == 0) {
+			qlm_cfg.u64 = cvmx_read_csr(CVMX_MIO_QLMX_CFG(2));
+			if (qlm_cfg.s.qlm_cfg == 2)
+				return CVMX_HELPER_INTERFACE_MODE_SGMII;
+			else if (qlm_cfg.s.qlm_cfg == 3)
+				return CVMX_HELPER_INTERFACE_MODE_XAUI;
+			else
+				return CVMX_HELPER_INTERFACE_MODE_DISABLED;
+		} else if (interface == 1) {
+			qlm_cfg.u64 = cvmx_read_csr(CVMX_MIO_QLMX_CFG(0));
+			if (qlm_cfg.s.qlm_cfg == 2)
+				return CVMX_HELPER_INTERFACE_MODE_SGMII;
+			else if (qlm_cfg.s.qlm_cfg == 3)
+				return CVMX_HELPER_INTERFACE_MODE_XAUI;
+			else
+				return CVMX_HELPER_INTERFACE_MODE_DISABLED;
+		}
+	} else if (OCTEON_IS_MODEL(OCTEON_CNF71XX)) {
+		if (interface == 0) {
+			union cvmx_mio_qlmx_cfg qlm_cfg;
+			qlm_cfg.u64 = cvmx_read_csr(CVMX_MIO_QLMX_CFG(0));
+			if (qlm_cfg.s.qlm_cfg == 2)
+				return CVMX_HELPER_INTERFACE_MODE_SGMII;
+		}
+		return CVMX_HELPER_INTERFACE_MODE_DISABLED;
+	}
+
+	if (interface == 1 && OCTEON_IS_MODEL(OCTEON_CN63XX))
+		return CVMX_HELPER_INTERFACE_MODE_DISABLED;
+
+	mode.u64 = cvmx_read_csr(CVMX_GMXX_INF_MODE(interface));
+
+	if (OCTEON_IS_MODEL(OCTEON_CN63XX)) {
+		switch (mode.cn63xx.mode) {
+		case 0:
+			return CVMX_HELPER_INTERFACE_MODE_SGMII;
+		case 1:
+			return CVMX_HELPER_INTERFACE_MODE_XAUI;
+		default:
+			return CVMX_HELPER_INTERFACE_MODE_DISABLED;
+		}
+	} else {
+		if (!mode.s.en)
+			return CVMX_HELPER_INTERFACE_MODE_DISABLED;
+
+		if (mode.s.type)
+			return CVMX_HELPER_INTERFACE_MODE_GMII;
+		else
+			return CVMX_HELPER_INTERFACE_MODE_RGMII;
+	}
+}
+
 /**
  * Get the operating mode of an interface. Depending on the Octeon
  * chip and configuration, this function returns an enumeration
@@ -118,6 +270,20 @@ EXPORT_SYMBOL_GPL(cvmx_helper_ports_on_interface);
 cvmx_helper_interface_mode_t cvmx_helper_interface_get_mode(int interface)
 {
 	union cvmx_gmxx_inf_mode mode;
+
+	if (interface < 0 ||
+	    interface >= cvmx_helper_get_number_of_interfaces())
+		return CVMX_HELPER_INTERFACE_MODE_DISABLED;
+
+	/*
+	 * Octeon II models
+	 */
+	if (OCTEON_IS_MODEL(OCTEON_CN6XXX) || OCTEON_IS_MODEL(OCTEON_CNF71XX))
+		return __cvmx_get_mode_octeon2(interface);
+
+	/*
+	 * Octeon and Octeon Plus models
+	 */
 	if (interface == 2)
 		return CVMX_HELPER_INTERFACE_MODE_NPI;
 

arch/mips/cavium-octeon/octeon-irq.c

@@ -1260,11 +1260,13 @@ static void __init octeon_irq_init_ciu(void)
 	for (i = 0; i < 4; i++)
 		octeon_irq_force_ciu_mapping(ciu_domain, i + OCTEON_IRQ_PCI_MSI0, 0, i + 40);
 
+	octeon_irq_force_ciu_mapping(ciu_domain, OCTEON_IRQ_TWSI, 0, 45);
 	octeon_irq_force_ciu_mapping(ciu_domain, OCTEON_IRQ_RML, 0, 46);
 	for (i = 0; i < 4; i++)
 		octeon_irq_force_ciu_mapping(ciu_domain, i + OCTEON_IRQ_TIMER0, 0, i + 52);
 
 	octeon_irq_force_ciu_mapping(ciu_domain, OCTEON_IRQ_USB0, 0, 56);
+	octeon_irq_force_ciu_mapping(ciu_domain, OCTEON_IRQ_TWSI2, 0, 59);
 
 	/* CIU_1 */
 	for (i = 0; i < 16; i++)

arch/mips/cavium-octeon/setup.c

@@ -729,17 +729,6 @@ void __init prom_init(void)
 	octeon_write_lcd("Linux");
 #endif
 
-#ifdef CONFIG_CAVIUM_GDB
-	/*
-	 * When debugging the linux kernel, force the cores to enter
-	 * the debug exception handler to break in.
-	 */
-	if (octeon_get_boot_debug_flag()) {
-		cvmx_write_csr(CVMX_CIU_DINT, 1 << cvmx_get_core_num());
-		cvmx_read_csr(CVMX_CIU_DINT);
-	}
-#endif
-
 	octeon_setup_delays();
 
 	/*
@@ -779,12 +768,6 @@ void __init prom_init(void)
 				MAX_MEMORY = 32ull << 30;
 			if (*p == '@')
 				RESERVE_LOW_MEM = memparse(p + 1, &p);
-		} else if (strcmp(arg, "ecc_verbose") == 0) {
-#ifdef CONFIG_CAVIUM_REPORT_SINGLE_BIT_ECC
-			__cvmx_interrupt_ecc_report_single_bit_errors = 1;
-			pr_notice("Reporting of single bit ECC errors is "
-				  "turned on\n");
-#endif
 #ifdef CONFIG_KEXEC
 		} else if (strncmp(arg, "crashkernel=", 12) == 0) {
 			crashk_size = memparse(arg+12, &p);

arch/mips/cavium-octeon/smp.c

@@ -218,15 +218,6 @@ void octeon_prepare_cpus(unsigned int max_cpus)
  */
 static void octeon_smp_finish(void)
 {
-#ifdef CONFIG_CAVIUM_GDB
-	unsigned long tmp;
-	/* Pulse MCD0 signal on Ctrl-C to stop all the cores. Also set the MCD0
-	   to be not masked by this core so we know the signal is received by
-	   someone */
-	asm volatile ("dmfc0 %0, $22\n"
-		      "ori   %0, %0, 0x9100\n" "dmtc0 %0, $22\n" : "=r" (tmp));
-#endif
-
 	octeon_user_io_init();
 
 	/* to generate the first CPU timer interrupt */
@@ -234,21 +225,6 @@ static void octeon_smp_finish(void)
 	local_irq_enable();
 }
 
-/**
- * Hook for after all CPUs are online
- */
-static void octeon_cpus_done(void)
-{
-#ifdef CONFIG_CAVIUM_GDB
-	unsigned long tmp;
-	/* Pulse MCD0 signal on Ctrl-C to stop all the cores. Also set the MCD0
-	   to be not masked by this core so we know the signal is received by
-	   someone */
-	asm volatile ("dmfc0 %0, $22\n"
-		      "ori   %0, %0, 0x9100\n" "dmtc0 %0, $22\n" : "=r" (tmp));
-#endif
-}
-
 #ifdef CONFIG_HOTPLUG_CPU
 
 /* State of each CPU. */
@@ -405,7 +381,6 @@ struct plat_smp_ops octeon_smp_ops = {
 	.send_ipi_mask		= octeon_send_ipi_mask,
 	.init_secondary		= octeon_init_secondary,
 	.smp_finish		= octeon_smp_finish,
-	.cpus_done		= octeon_cpus_done,
 	.boot_secondary		= octeon_boot_secondary,
 	.smp_setup		= octeon_smp_setup,
 	.prepare_cpus		= octeon_prepare_cpus,

arch/mips/configs/ath79_defconfig

@@ -46,7 +46,6 @@ CONFIG_MTD=y
 CONFIG_MTD_REDBOOT_PARTS=y
 CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-2
 CONFIG_MTD_CMDLINE_PARTS=y
-CONFIG_MTD_CHAR=y
 CONFIG_MTD_BLOCK=y
 CONFIG_MTD_CFI=y
 CONFIG_MTD_JEDECPROBE=y
@@ -54,7 +53,7 @@ CONFIG_MTD_CFI_AMDSTD=y
 CONFIG_MTD_COMPLEX_MAPPINGS=y
 CONFIG_MTD_PHYSMAP=y
 CONFIG_MTD_M25P80=y
-# CONFIG_M25PXX_USE_FAST_READ is not set
+CONFIG_MTD_SPI_NOR=y
 CONFIG_NETDEVICES=y
 # CONFIG_NET_PACKET_ENGINE is not set
 CONFIG_ATH_COMMON=m

arch/mips/configs/db1xxx_defconfig

@@ -113,6 +113,7 @@ CONFIG_MTD_NAND=y
 CONFIG_MTD_NAND_ECC_BCH=y
 CONFIG_MTD_NAND_AU1550=y
 CONFIG_MTD_NAND_PLATFORM=y
+CONFIG_MTD_SPI_NOR=y
 CONFIG_EEPROM_AT24=y
 CONFIG_EEPROM_AT25=y
 CONFIG_SCSI_TGT=y

arch/mips/configs/maltasmtc_defconfig

@@ -1,196 +0,0 @@
-CONFIG_MIPS_MALTA=y
-CONFIG_CPU_LITTLE_ENDIAN=y
-CONFIG_CPU_MIPS32_R2=y
-CONFIG_PAGE_SIZE_16KB=y
-CONFIG_MIPS_MT_SMTC=y
-# CONFIG_MIPS_MT_FPAFF is not set
-CONFIG_NR_CPUS=9
-CONFIG_HZ_48=y
-CONFIG_LOCALVERSION="smtc"
-CONFIG_SYSVIPC=y
-CONFIG_POSIX_MQUEUE=y
-CONFIG_AUDIT=y
-CONFIG_IKCONFIG=y
-CONFIG_IKCONFIG_PROC=y
-CONFIG_LOG_BUF_SHIFT=15
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_EMBEDDED=y
-CONFIG_SLAB=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-CONFIG_MODVERSIONS=y
-CONFIG_MODULE_SRCVERSION_ALL=y
-# CONFIG_BLK_DEV_BSG is not set
-CONFIG_PCI=y
-# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_XFRM_USER=m
-CONFIG_NET_KEY=y
-CONFIG_INET=y
-CONFIG_IP_MULTICAST=y
-CONFIG_IP_ADVANCED_ROUTER=y
-CONFIG_IP_MULTIPLE_TABLES=y
-CONFIG_IP_ROUTE_MULTIPATH=y
-CONFIG_IP_ROUTE_VERBOSE=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-CONFIG_IP_PNP_BOOTP=y
-CONFIG_NET_IPIP=m
-CONFIG_IP_MROUTE=y
-CONFIG_IP_PIMSM_V1=y
-CONFIG_IP_PIMSM_V2=y
-CONFIG_SYN_COOKIES=y
-CONFIG_INET_AH=m
-CONFIG_INET_ESP=m
-CONFIG_INET_IPCOMP=m
-# CONFIG_INET_LRO is not set
-CONFIG_INET6_AH=m
-CONFIG_INET6_ESP=m
-CONFIG_INET6_IPCOMP=m
-CONFIG_IPV6_TUNNEL=m
-CONFIG_BRIDGE=m
-CONFIG_VLAN_8021Q=m
-CONFIG_ATALK=m
-CONFIG_DEV_APPLETALK=m
-CONFIG_IPDDP=m
-CONFIG_IPDDP_ENCAP=y
-CONFIG_NET_SCHED=y
-CONFIG_NET_SCH_CBQ=m
-CONFIG_NET_SCH_HTB=m
-CONFIG_NET_SCH_HFSC=m
-CONFIG_NET_SCH_PRIO=m
-CONFIG_NET_SCH_RED=m
-CONFIG_NET_SCH_SFQ=m
-CONFIG_NET_SCH_TEQL=m
-CONFIG_NET_SCH_TBF=m
-CONFIG_NET_SCH_GRED=m
-CONFIG_NET_SCH_DSMARK=m
-CONFIG_NET_SCH_NETEM=m
-CONFIG_NET_SCH_INGRESS=m
-CONFIG_NET_CLS_BASIC=m
-CONFIG_NET_CLS_TCINDEX=m
-CONFIG_NET_CLS_ROUTE4=m
-CONFIG_NET_CLS_FW=m
-CONFIG_NET_CLS_U32=m
-CONFIG_NET_CLS_RSVP=m
-CONFIG_NET_CLS_RSVP6=m
-CONFIG_NET_CLS_ACT=y
-CONFIG_NET_ACT_POLICE=y
-CONFIG_NET_CLS_IND=y
-# CONFIG_WIRELESS is not set
-CONFIG_DEVTMPFS=y
-CONFIG_BLK_DEV_LOOP=y
-CONFIG_BLK_DEV_CRYPTOLOOP=m
-CONFIG_IDE=y
-# CONFIG_IDE_PROC_FS is not set
-# CONFIG_IDEPCI_PCIBUS_ORDER is not set
-CONFIG_BLK_DEV_GENERIC=y
-CONFIG_BLK_DEV_PIIX=y
-CONFIG_SCSI=y
-CONFIG_BLK_DEV_SD=y
-CONFIG_CHR_DEV_SG=y
-# CONFIG_SCSI_LOWLEVEL is not set
-CONFIG_NETDEVICES=y
-# CONFIG_NET_VENDOR_3COM is not set
-# CONFIG_NET_VENDOR_ADAPTEC is not set
-# CONFIG_NET_VENDOR_ALTEON is not set
-CONFIG_PCNET32=y
-# CONFIG_NET_VENDOR_ATHEROS is not set
-# CONFIG_NET_VENDOR_BROADCOM is not set
-# CONFIG_NET_VENDOR_BROCADE is not set
-# CONFIG_NET_VENDOR_CHELSIO is not set
-# CONFIG_NET_VENDOR_CISCO is not set
-# CONFIG_NET_VENDOR_DEC is not set
-# CONFIG_NET_VENDOR_DLINK is not set
-# CONFIG_NET_VENDOR_EMULEX is not set
-# CONFIG_NET_VENDOR_EXAR is not set
-# CONFIG_NET_VENDOR_HP is not set
-# CONFIG_NET_VENDOR_INTEL is not set
-# CONFIG_NET_VENDOR_MARVELL is not set
-# CONFIG_NET_VENDOR_MELLANOX is not set
-# CONFIG_NET_VENDOR_MICREL is not set
-# CONFIG_NET_VENDOR_MYRI is not set
-# CONFIG_NET_VENDOR_NATSEMI is not set
-# CONFIG_NET_VENDOR_NVIDIA is not set
-# CONFIG_NET_VENDOR_OKI is not set
-# CONFIG_NET_PACKET_ENGINE is not set
-# CONFIG_NET_VENDOR_QLOGIC is not set
-# CONFIG_NET_VENDOR_REALTEK is not set
-# CONFIG_NET_VENDOR_RDC is not set
-# CONFIG_NET_VENDOR_SEEQ is not set
-# CONFIG_NET_VENDOR_SILAN is not set
-# CONFIG_NET_VENDOR_SIS is not set
-# CONFIG_NET_VENDOR_SMSC is not set
-# CONFIG_NET_VENDOR_STMICRO is not set
-# CONFIG_NET_VENDOR_SUN is not set
-# CONFIG_NET_VENDOR_TEHUTI is not set
-# CONFIG_NET_VENDOR_TI is not set
-# CONFIG_NET_VENDOR_TOSHIBA is not set
-# CONFIG_NET_VENDOR_VIA is not set
-# CONFIG_WLAN is not set
-# CONFIG_VT is not set
-CONFIG_LEGACY_PTY_COUNT=16
-CONFIG_SERIAL_8250=y
-CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_HW_RANDOM=y
-# CONFIG_HWMON is not set
-CONFIG_VIDEO_OUTPUT_CONTROL=m
-CONFIG_FB=y
-CONFIG_FIRMWARE_EDID=y
-CONFIG_FB_MATROX=y
-CONFIG_FB_MATROX_G=y
-CONFIG_USB=y
-CONFIG_USB_EHCI_HCD=y
-# CONFIG_USB_EHCI_TT_NEWSCHED is not set
-CONFIG_USB_UHCI_HCD=y
-CONFIG_USB_STORAGE=y
-CONFIG_NEW_LEDS=y
-CONFIG_LEDS_CLASS=y
-CONFIG_LEDS_TRIGGERS=y
-CONFIG_LEDS_TRIGGER_TIMER=y
-CONFIG_LEDS_TRIGGER_IDE_DISK=y
-CONFIG_LEDS_TRIGGER_HEARTBEAT=y
-CONFIG_LEDS_TRIGGER_BACKLIGHT=y
-CONFIG_LEDS_TRIGGER_DEFAULT_ON=y
-CONFIG_RTC_CLASS=y
-CONFIG_RTC_DRV_CMOS=y
-CONFIG_EXT2_FS=y
-CONFIG_EXT3_FS=y
-# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
-CONFIG_XFS_FS=y
-CONFIG_XFS_QUOTA=y
-CONFIG_XFS_POSIX_ACL=y
-CONFIG_QUOTA=y
-CONFIG_QFMT_V2=y
-CONFIG_MSDOS_FS=m
-CONFIG_VFAT_FS=m
-CONFIG_PROC_KCORE=y
-CONFIG_TMPFS=y
-CONFIG_NFS_FS=y
-CONFIG_ROOT_NFS=y
-CONFIG_CIFS=m
-CONFIG_CIFS_WEAK_PW_HASH=y
-CONFIG_CIFS_XATTR=y
-CONFIG_CIFS_POSIX=y
-CONFIG_NLS_CODEPAGE_437=m
-CONFIG_NLS_ISO8859_1=m
-# CONFIG_FTRACE is not set
-CONFIG_CRYPTO_NULL=m
-CONFIG_CRYPTO_PCBC=m
-CONFIG_CRYPTO_HMAC=y
-CONFIG_CRYPTO_MICHAEL_MIC=m
-CONFIG_CRYPTO_SHA512=m
-CONFIG_CRYPTO_TGR192=m
-CONFIG_CRYPTO_WP512=m
-CONFIG_CRYPTO_ANUBIS=m
-CONFIG_CRYPTO_BLOWFISH=m
-CONFIG_CRYPTO_CAST5=m
-CONFIG_CRYPTO_CAST6=m
-CONFIG_CRYPTO_KHAZAD=m
-CONFIG_CRYPTO_SERPENT=m
-CONFIG_CRYPTO_TEA=m
-CONFIG_CRYPTO_TWOFISH=m
-# CONFIG_CRYPTO_ANSI_CPRNG is not set
-# CONFIG_CRYPTO_HW is not set

arch/mips/configs/maltasmvp_defconfig

@@ -4,10 +4,9 @@ CONFIG_CPU_MIPS32_R2=y
 CONFIG_PAGE_SIZE_16KB=y
 CONFIG_MIPS_MT_SMP=y
 CONFIG_SCHED_SMT=y
-CONFIG_MIPS_CMP=y
+CONFIG_MIPS_CPS=y
 CONFIG_NR_CPUS=8
 CONFIG_HZ_100=y
-CONFIG_LOCALVERSION="cmp"
 CONFIG_SYSVIPC=y
 CONFIG_POSIX_MQUEUE=y
 CONFIG_AUDIT=y

arch/mips/configs/maltasmvp_eva_defconfig

@@ -5,10 +5,9 @@ CONFIG_CPU_MIPS32_3_5_FEATURES=y
 CONFIG_PAGE_SIZE_16KB=y
 CONFIG_MIPS_MT_SMP=y
 CONFIG_SCHED_SMT=y
-CONFIG_MIPS_CMP=y
+CONFIG_MIPS_CPS=y
 CONFIG_NR_CPUS=8
 CONFIG_HZ_100=y
-CONFIG_LOCALVERSION="cmp"
 CONFIG_SYSVIPC=y
 CONFIG_POSIX_MQUEUE=y
 CONFIG_AUDIT=y

arch/mips/configs/mips_paravirt_defconfig

@@ -0,0 +1,103 @@
+CONFIG_MIPS_PARAVIRT=y
+CONFIG_CPU_MIPS64_R2=y
+CONFIG_64BIT=y
+CONFIG_TRANSPARENT_HUGEPAGE=y
+CONFIG_SMP=y
+CONFIG_HZ_1000=y
+CONFIG_PREEMPT=y
+CONFIG_SYSVIPC=y
+CONFIG_BSD_PROCESS_ACCT=y
+CONFIG_BSD_PROCESS_ACCT_V3=y
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
+CONFIG_LOG_BUF_SHIFT=14
+CONFIG_RELAY=y
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_EXPERT=y
+CONFIG_SLAB=y
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_BLK_DEV_BSG is not set
+CONFIG_PCI=y
+CONFIG_MIPS32_COMPAT=y
+CONFIG_MIPS32_O32=y
+CONFIG_MIPS32_N32=y
+CONFIG_NET=y
+CONFIG_PACKET=y
+CONFIG_UNIX=y
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+CONFIG_IP_ADVANCED_ROUTER=y
+CONFIG_IP_MULTIPLE_TABLES=y
+CONFIG_IP_ROUTE_MULTIPATH=y
+CONFIG_IP_ROUTE_VERBOSE=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+CONFIG_IP_PNP_BOOTP=y
+CONFIG_IP_PNP_RARP=y
+CONFIG_IP_MROUTE=y
+CONFIG_IP_PIMSM_V1=y
+CONFIG_IP_PIMSM_V2=y
+CONFIG_SYN_COOKIES=y
+# CONFIG_INET_LRO is not set
+CONFIG_IPV6=y
+# CONFIG_WIRELESS is not set
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+# CONFIG_FW_LOADER is not set
+CONFIG_BLK_DEV_LOOP=y
+CONFIG_VIRTIO_BLK=y
+CONFIG_SCSI=y
+CONFIG_BLK_DEV_SD=y
+CONFIG_NETDEVICES=y
+CONFIG_VIRTIO_NET=y
+# CONFIG_NET_VENDOR_BROADCOM is not set
+# CONFIG_NET_VENDOR_INTEL is not set
+# CONFIG_NET_VENDOR_MARVELL is not set
+# CONFIG_NET_VENDOR_MICREL is not set
+# CONFIG_NET_VENDOR_NATSEMI is not set
+# CONFIG_NET_VENDOR_SMSC is not set
+# CONFIG_NET_VENDOR_STMICRO is not set
+# CONFIG_NET_VENDOR_WIZNET is not set
+CONFIG_PHYLIB=y
+CONFIG_MARVELL_PHY=y
+CONFIG_BROADCOM_PHY=y
+CONFIG_BCM87XX_PHY=y
+# CONFIG_WLAN is not set
+# CONFIG_INPUT is not set
+# CONFIG_SERIO is not set
+# CONFIG_VT is not set
+CONFIG_VIRTIO_CONSOLE=y
+# CONFIG_HW_RANDOM is not set
+# CONFIG_HWMON is not set
+# CONFIG_USB_SUPPORT is not set
+CONFIG_VIRTIO_PCI=y
+CONFIG_VIRTIO_BALLOON=y
+CONFIG_VIRTIO_MMIO=y
+# CONFIG_IOMMU_SUPPORT is not set
+CONFIG_EXT4_FS=y
+CONFIG_EXT4_FS_POSIX_ACL=y
+CONFIG_EXT4_FS_SECURITY=y
+CONFIG_MSDOS_FS=y
+CONFIG_VFAT_FS=y
+CONFIG_PROC_KCORE=y
+CONFIG_TMPFS=y
+CONFIG_HUGETLBFS=y
+# CONFIG_MISC_FILESYSTEMS is not set
+CONFIG_NFS_FS=y
+CONFIG_NFS_V4=y
+CONFIG_NFS_V4_1=y
+CONFIG_ROOT_NFS=y
+CONFIG_NLS_CODEPAGE_437=y
+CONFIG_NLS_ASCII=y
+CONFIG_NLS_ISO8859_1=y
+CONFIG_NLS_UTF8=y
+CONFIG_DEBUG_INFO=y
+CONFIG_DEBUG_FS=y
+CONFIG_MAGIC_SYSRQ=y
+# CONFIG_SCHED_DEBUG is not set
+# CONFIG_FTRACE is not set
+CONFIG_CRYPTO_CBC=y
+CONFIG_CRYPTO_HMAC=y
+CONFIG_CRYPTO_MD5=y
+CONFIG_CRYPTO_DES=y
+# CONFIG_CRYPTO_ANSI_CPRNG is not set

arch/mips/configs/rt305x_defconfig

@@ -81,7 +81,6 @@ CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 # CONFIG_FIRMWARE_IN_KERNEL is not set
 CONFIG_MTD=y
 CONFIG_MTD_CMDLINE_PARTS=y
-CONFIG_MTD_CHAR=y
 CONFIG_MTD_BLOCK=y
 CONFIG_MTD_CFI=y
 CONFIG_MTD_CFI_AMDSTD=y
@@ -89,6 +88,7 @@ CONFIG_MTD_COMPLEX_MAPPINGS=y
 CONFIG_MTD_PHYSMAP=y
 CONFIG_MTD_PHYSMAP_OF=y
 CONFIG_MTD_M25P80=y
+CONFIG_MTD_SPI_NOR=y
 CONFIG_EEPROM_93CX6=m
 CONFIG_SCSI=y
 CONFIG_BLK_DEV_SD=y

arch/mips/dec/setup.c

@@ -23,6 +23,7 @@
 #include <asm/bootinfo.h>
 #include <asm/cpu.h>
 #include <asm/cpu-features.h>
+#include <asm/cpu-type.h>
 #include <asm/irq.h>
 #include <asm/irq_cpu.h>
 #include <asm/mipsregs.h>
@@ -748,6 +749,10 @@ void __init arch_init_irq(void)
 		cpu_fpu_mask = 0;
 		dec_interrupt[DEC_IRQ_FPU] = -1;
 	}
+	/* Free the halt interrupt unused on R4k systems.  */
+	if (current_cpu_type() == CPU_R4000SC ||
+	    current_cpu_type() == CPU_R4400SC)
+		dec_interrupt[DEC_IRQ_HALT] = -1;
 
 	/* Register board interrupts: FPU and cascade. */
 	if (dec_interrupt[DEC_IRQ_FPU] >= 0)

arch/mips/include/asm/asmmacro.h

@@ -17,26 +17,8 @@
 #ifdef CONFIG_64BIT
 #include <asm/asmmacro-64.h>
 #endif
-#ifdef CONFIG_MIPS_MT_SMTC
-#include <asm/mipsmtregs.h>
-#endif
-
-#ifdef CONFIG_MIPS_MT_SMTC
-	.macro	local_irq_enable reg=t0
-	mfc0	\reg, CP0_TCSTATUS
-	ori	\reg, \reg, TCSTATUS_IXMT
-	xori	\reg, \reg, TCSTATUS_IXMT
-	mtc0	\reg, CP0_TCSTATUS
-	_ehb
-	.endm
 
-	.macro	local_irq_disable reg=t0
-	mfc0	\reg, CP0_TCSTATUS
-	ori	\reg, \reg, TCSTATUS_IXMT
-	mtc0	\reg, CP0_TCSTATUS
-	_ehb
-	.endm
-#elif defined(CONFIG_CPU_MIPSR2)
+#ifdef CONFIG_CPU_MIPSR2
 	.macro	local_irq_enable reg=t0
 	ei
 	irq_enable_hazard
@@ -71,7 +53,7 @@
 	sw      \reg, TI_PRE_COUNT($28)
 #endif
 	.endm
-#endif /* CONFIG_MIPS_MT_SMTC */
+#endif /* CONFIG_CPU_MIPSR2 */
 
 	.macro	fpu_save_16even thread tmp=t0
 	cfc1	\tmp, fcr31
@@ -267,13 +249,35 @@
 	.set	pop
 	.endm
 #else
+
+#ifdef CONFIG_CPU_MICROMIPS
+#define CFC_MSA_INSN		0x587e0056
+#define CTC_MSA_INSN		0x583e0816
+#define LDD_MSA_INSN		0x58000837
+#define STD_MSA_INSN		0x5800083f
+#define COPY_UW_MSA_INSN	0x58f00056
+#define COPY_UD_MSA_INSN	0x58f80056
+#define INSERT_W_MSA_INSN	0x59300816
+#define INSERT_D_MSA_INSN	0x59380816
+#else
+#define CFC_MSA_INSN		0x787e0059
+#define CTC_MSA_INSN		0x783e0819
+#define LDD_MSA_INSN		0x78000823
+#define STD_MSA_INSN		0x78000827
+#define COPY_UW_MSA_INSN	0x78f00059
+#define COPY_UD_MSA_INSN	0x78f80059
+#define INSERT_W_MSA_INSN	0x79300819
+#define INSERT_D_MSA_INSN	0x79380819
+#endif
+
 	/*
 	 * Temporary until all toolchains in use include MSA support.
 	 */
 	.macro	cfcmsa	rd, cs
 	.set	push
 	.set	noat
-	.word	0x787e0059 | (\cs << 11)
+	.insn
+	.word	CFC_MSA_INSN | (\cs << 11)
 	move	\rd, $1
 	.set	pop
 	.endm
@@ -282,7 +286,7 @@
 	.set	push
 	.set	noat
 	move	$1, \rs
-	.word	0x783e0819 | (\cd << 6)
+	.word	CTC_MSA_INSN | (\cd << 6)
 	.set	pop
 	.endm
 
@@ -290,7 +294,7 @@
 	.set	push
 	.set	noat
 	add	$1, \base, \off
-	.word	0x78000823 | (\wd << 6)
+	.word	LDD_MSA_INSN | (\wd << 6)
 	.set	pop
 	.endm
 
@@ -298,14 +302,15 @@
 	.set	push
 	.set	noat
 	add	$1, \base, \off
-	.word	0x78000827 | (\wd << 6)
+	.word	STD_MSA_INSN | (\wd << 6)
 	.set	pop
 	.endm
 
 	.macro	copy_u_w	rd, ws, n
 	.set	push
 	.set	noat
-	.word	0x78f00059 | (\n << 16) | (\ws << 11)
+	.insn
+	.word	COPY_UW_MSA_INSN | (\n << 16) | (\ws << 11)
 	/* move triggers an assembler bug... */
 	or	\rd, $1, zero
 	.set	pop
@@ -314,7 +319,8 @@
 	.macro	copy_u_d	rd, ws, n
 	.set	push
 	.set	noat
-	.word	0x78f80059 | (\n << 16) | (\ws << 11)
+	.insn
+	.word	COPY_UD_MSA_INSN | (\n << 16) | (\ws << 11)
 	/* move triggers an assembler bug... */
 	or	\rd, $1, zero
 	.set	pop
@@ -325,7 +331,7 @@
 	.set	noat
 	/* move triggers an assembler bug... */
 	or	$1, \rs, zero
-	.word	0x79300819 | (\n << 16) | (\wd << 6)
+	.word	INSERT_W_MSA_INSN | (\n << 16) | (\wd << 6)
 	.set	pop
 	.endm
 
@@ -334,7 +340,7 @@
 	.set	noat
 	/* move triggers an assembler bug... */
 	or	$1, \rs, zero
-	.word	0x79380819 | (\n << 16) | (\wd << 6)
+	.word	INSERT_D_MSA_INSN | (\n << 16) | (\wd << 6)
 	.set	pop
 	.endm
 #endif

arch/mips/include/asm/branch.h

@@ -8,6 +8,8 @@
 #ifndef _ASM_BRANCH_H
 #define _ASM_BRANCH_H
 
+#include <asm/cpu-features.h>
+#include <asm/mipsregs.h>
 #include <asm/ptrace.h>
 #include <asm/inst.h>
 
@@ -18,12 +20,40 @@ extern int __compute_return_epc_for_insn(struct pt_regs *regs,
 extern int __microMIPS_compute_return_epc(struct pt_regs *regs);
 extern int __MIPS16e_compute_return_epc(struct pt_regs *regs);
 
+/*
+ * microMIPS bitfields
+ */
+#define MM_POOL32A_MINOR_MASK	0x3f
+#define MM_POOL32A_MINOR_SHIFT	0x6
+#define MM_MIPS32_COND_FC	0x30
+
+extern int __mm_isBranchInstr(struct pt_regs *regs,
+	struct mm_decoded_insn dec_insn, unsigned long *contpc);
+
+static inline int mm_isBranchInstr(struct pt_regs *regs,
+	struct mm_decoded_insn dec_insn, unsigned long *contpc)
+{
+	if (!cpu_has_mmips)
+		return 0;
+
+	return __mm_isBranchInstr(regs, dec_insn, contpc);
+}
 
 static inline int delay_slot(struct pt_regs *regs)
 {
 	return regs->cp0_cause & CAUSEF_BD;
 }
 
+static inline void clear_delay_slot(struct pt_regs *regs)
+{
+	regs->cp0_cause &= ~CAUSEF_BD;
+}
+
+static inline void set_delay_slot(struct pt_regs *regs)
+{
+	regs->cp0_cause |= CAUSEF_BD;
+}
+
 static inline unsigned long exception_epc(struct pt_regs *regs)
 {
 	if (likely(!delay_slot(regs)))

arch/mips/include/asm/cacheflush.h

@@ -113,6 +113,12 @@ unsigned long run_uncached(void *func);
 
 extern void *kmap_coherent(struct page *page, unsigned long addr);
 extern void kunmap_coherent(void);
+extern void *kmap_noncoherent(struct page *page, unsigned long addr);
+
+static inline void kunmap_noncoherent(void)
+{
+	kunmap_coherent();
+}
 
 #define ARCH_HAS_FLUSH_KERNEL_DCACHE_PAGE
 static inline void flush_kernel_dcache_page(struct page *page)

arch/mips/include/asm/cmp.h

@@ -10,7 +10,6 @@ extern void cmp_smp_setup(void);
 extern void cmp_smp_finish(void);
 extern void cmp_boot_secondary(int cpu, struct task_struct *t);
 extern void cmp_init_secondary(void);
-extern void cmp_cpus_done(void);
 extern void cmp_prepare_cpus(unsigned int max_cpus);
 
 /* This is platform specific */

arch/mips/include/asm/cpu-features.h

@@ -110,9 +110,15 @@
 #ifndef cpu_has_smartmips
 #define cpu_has_smartmips	(cpu_data[0].ases & MIPS_ASE_SMARTMIPS)
 #endif
+
 #ifndef cpu_has_rixi
-#define cpu_has_rixi		(cpu_data[0].options & MIPS_CPU_RIXI)
+# ifdef CONFIG_64BIT
+# define cpu_has_rixi		(cpu_data[0].options & MIPS_CPU_RIXI)
+# else /* CONFIG_32BIT */
+# define cpu_has_rixi		((cpu_data[0].options & MIPS_CPU_RIXI) && !cpu_has_64bits)
+# endif
 #endif
+
 #ifndef cpu_has_mmips
 # ifdef CONFIG_SYS_SUPPORTS_MICROMIPS
 #  define cpu_has_mmips		(cpu_data[0].options & MIPS_CPU_MICROMIPS)
@@ -120,6 +126,7 @@
 #  define cpu_has_mmips		0
 # endif
 #endif
+
 #ifndef cpu_has_vtag_icache
 #define cpu_has_vtag_icache	(cpu_data[0].icache.flags & MIPS_CACHE_VTAG)
 #endif
@@ -183,6 +190,17 @@
 /*
  * Shortcuts ...
  */
+#define cpu_has_mips_2_3_4_5	(cpu_has_mips_2 | cpu_has_mips_3_4_5)
+#define cpu_has_mips_3_4_5	(cpu_has_mips_3 | cpu_has_mips_4_5)
+#define cpu_has_mips_4_5	(cpu_has_mips_4 | cpu_has_mips_5)
+
+#define cpu_has_mips_2_3_4_5_r	(cpu_has_mips_2 | cpu_has_mips_3_4_5_r)
+#define cpu_has_mips_3_4_5_r	(cpu_has_mips_3 | cpu_has_mips_4_5_r)
+#define cpu_has_mips_4_5_r	(cpu_has_mips_4 | cpu_has_mips_5_r)
+#define cpu_has_mips_5_r	(cpu_has_mips_5 | cpu_has_mips_r)
+
+#define cpu_has_mips_4_5_r2	(cpu_has_mips_4_5 | cpu_has_mips_r2)
+
 #define cpu_has_mips32	(cpu_has_mips32r1 | cpu_has_mips32r2)
 #define cpu_has_mips64	(cpu_has_mips64r1 | cpu_has_mips64r2)
 #define cpu_has_mips_r1 (cpu_has_mips32r1 | cpu_has_mips64r1)

arch/mips/include/asm/cpu-info.h

@@ -65,17 +65,12 @@ struct cpuinfo_mips {
 #ifdef CONFIG_64BIT
 	int			vmbits; /* Virtual memory size in bits */
 #endif
-#if defined(CONFIG_MIPS_MT_SMP) || defined(CONFIG_MIPS_MT_SMTC)
+#ifdef CONFIG_MIPS_MT_SMP
 	/*
-	 * In the MIPS MT "SMTC" model, each TC is considered
-	 * to be a "CPU" for the purposes of scheduling, but
-	 * exception resources, ASID spaces, etc, are common
-	 * to all TCs within the same VPE.
+	 * There is not necessarily a 1:1 mapping of VPE num to CPU number
+	 * in particular on multi-core systems.
 	 */
 	int			vpe_id;	 /* Virtual Processor number */
-#endif
-#ifdef CONFIG_MIPS_MT_SMTC
-	int			tc_id;	 /* Thread Context number */
 #endif
 	void			*data;	/* Additional data */
 	unsigned int		watch_reg_count;   /* Number that exist */
@@ -117,7 +112,7 @@ struct proc_cpuinfo_notifier_args {
 	unsigned long n;
 };
 
-#if defined(CONFIG_MIPS_MT_SMP) || defined(CONFIG_MIPS_MT_SMTC)
+#ifdef CONFIG_MIPS_MT_SMP
 # define cpu_vpe_id(cpuinfo)	((cpuinfo)->vpe_id)
 #else
 # define cpu_vpe_id(cpuinfo)	0

arch/mips/include/asm/cpu-type.h

@@ -155,9 +155,6 @@ static inline int __pure __get_cpu_type(const int cpu_type)
 	case CPU_RM7000:
 	case CPU_SR71000:
 #endif
-#ifdef CONFIG_SYS_HAS_CPU_RM9000
-	case CPU_RM9000:
-#endif
 #ifdef CONFIG_SYS_HAS_CPU_SB1
 	case CPU_SB1:
 	case CPU_SB1A:
@@ -166,6 +163,7 @@ static inline int __pure __get_cpu_type(const int cpu_type)
 	case CPU_CAVIUM_OCTEON:
 	case CPU_CAVIUM_OCTEON_PLUS:
 	case CPU_CAVIUM_OCTEON2:
+	case CPU_CAVIUM_OCTEON3:
 #endif
 
 #if defined(CONFIG_SYS_HAS_CPU_BMIPS32_3300) || \

arch/mips/include/asm/cpu.h

@@ -201,6 +201,7 @@
 #define PRID_IMP_NETLOGIC_XLP3XX	0x1100
 #define PRID_IMP_NETLOGIC_XLP2XX	0x1200
 #define PRID_IMP_NETLOGIC_XLP9XX	0x1500
+#define PRID_IMP_NETLOGIC_XLP5XX	0x1300
 
 /*
  * Particular Revision values for bits 7:0 of the PRId register.
@@ -281,7 +282,7 @@ enum cpu_type_enum {
 	CPU_R4700, CPU_R5000, CPU_R5500, CPU_NEVADA, CPU_R5432, CPU_R10000,
 	CPU_R12000, CPU_R14000, CPU_VR41XX, CPU_VR4111, CPU_VR4121, CPU_VR4122,
 	CPU_VR4131, CPU_VR4133, CPU_VR4181, CPU_VR4181A, CPU_RM7000,
-	CPU_SR71000, CPU_RM9000, CPU_TX49XX,
+	CPU_SR71000, CPU_TX49XX,
 
 	/*
 	 * R8000 class processors

arch/mips/include/asm/dec/kn05.h

@@ -48,13 +48,21 @@
 #define KN4K_RES_14	(14*IOASIC_SLOT_SIZE)	/* unused? */
 #define KN4K_RES_15	(15*IOASIC_SLOT_SIZE)	/* unused? */
 
+/*
+ * MB ASIC interrupt bits.
+ */
+#define KN4K_MB_INR_MB		4	/* ??? */
+#define KN4K_MB_INR_MT		3	/* memory, I/O bus read/write errors */
+#define KN4K_MB_INR_RES_2	2	/* unused */
+#define KN4K_MB_INR_RTC		1	/* RTC */
+#define KN4K_MB_INR_TC		0	/* I/O ASIC cascade */
+
 /*
  * Bits for the MB interrupt register.
  * The register appears read-only.
  */
-#define KN4K_MB_INT_TC		(1<<0)		/* TURBOchannel? */
-#define KN4K_MB_INT_RTC		(1<<1)		/* RTC? */
-#define KN4K_MB_INT_MT		(1<<3)		/* I/O ASIC cascade */
+#define KN4K_MB_INT_IRQ		(0x1f<<0)	/* CPU Int[4:0] status. */
+#define KN4K_MB_INT_IRQ_N(n)	(1<<(n))	/* Individual status bits. */
 
 /*
  * Bits for the MB control & status register.
@@ -70,6 +78,7 @@
 #define KN4K_MB_CSR_NC		(1<<14)		/* ??? */
 #define KN4K_MB_CSR_EE		(1<<15)		/* (bus) Exception Enable? */
 #define KN4K_MB_CSR_MSK		(0x1f<<16)	/* CPU Int[4:0] mask */
+#define KN4K_MB_CSR_MSK_N(n)	(1<<((n)+16))	/* Individual mask bits. */
 #define KN4K_MB_CSR_FW		(1<<21)		/* ??? */
 #define KN4K_MB_CSR_W		(1<<31)		/* ??? */
 

arch/mips/include/asm/fixmap.h

@@ -48,11 +48,7 @@
 enum fixed_addresses {
 #define FIX_N_COLOURS 8
 	FIX_CMAP_BEGIN,
-#ifdef CONFIG_MIPS_MT_SMTC
-	FIX_CMAP_END = FIX_CMAP_BEGIN + (FIX_N_COLOURS * NR_CPUS * 2),
-#else
 	FIX_CMAP_END = FIX_CMAP_BEGIN + (FIX_N_COLOURS * 2),
-#endif
 #ifdef CONFIG_HIGHMEM
 	/* reserved pte's for temporary kernel mappings */
 	FIX_KMAP_BEGIN = FIX_CMAP_END + 1,

arch/mips/include/asm/fpu.h

@@ -17,6 +17,7 @@
 #include <asm/mipsregs.h>
 #include <asm/cpu.h>
 #include <asm/cpu-features.h>
+#include <asm/fpu_emulator.h>
 #include <asm/hazards.h>
 #include <asm/processor.h>
 #include <asm/current.h>
@@ -28,7 +29,6 @@
 struct sigcontext;
 struct sigcontext32;
 
-extern void fpu_emulator_init_fpu(void);
 extern void _init_fpu(void);
 extern void _save_fp(struct task_struct *);
 extern void _restore_fp(struct task_struct *);
@@ -156,15 +156,16 @@ static inline int init_fpu(void)
 	int ret = 0;
 
 	preempt_disable();
+
 	if (cpu_has_fpu) {
 		ret = __own_fpu();
 		if (!ret)
 			_init_fpu();
-	} else {
+	} else
 		fpu_emulator_init_fpu();
-	}
 
 	preempt_enable();
+
 	return ret;
 }
 

arch/mips/include/asm/fpu_emulator.h

@@ -23,9 +23,12 @@
 #ifndef _ASM_FPU_EMULATOR_H
 #define _ASM_FPU_EMULATOR_H
 
+#include <linux/sched.h>
 #include <asm/break.h>
+#include <asm/thread_info.h>
 #include <asm/inst.h>
 #include <asm/local.h>
+#include <asm/processor.h>
 
 #ifdef CONFIG_DEBUG_FS
 
@@ -36,6 +39,11 @@ struct mips_fpu_emulator_stats {
 	local_t cp1ops;
 	local_t cp1xops;
 	local_t errors;
+	local_t ieee754_inexact;
+	local_t ieee754_underflow;
+	local_t ieee754_overflow;
+	local_t ieee754_zerodiv;
+	local_t ieee754_invalidop;
 };
 
 DECLARE_PER_CPU(struct mips_fpu_emulator_stats, fpuemustats);
@@ -71,4 +79,17 @@ int mm_isBranchInstr(struct pt_regs *regs, struct mm_decoded_insn dec_insn,
  */
 #define BREAK_MATH (0x0000000d | (BRK_MEMU << 16))
 
+#define SIGNALLING_NAN 0x7ff800007ff80000LL
+
+static inline void fpu_emulator_init_fpu(void)
+{
+	struct task_struct *t = current;
+	int i;
+
+	t->thread.fpu.fcr31 = 0;
+
+	for (i = 0; i < 32; i++)
+		set_fpr64(&t->thread.fpu.fpr[i], 0, SIGNALLING_NAN);
+}
+
 #endif /* _ASM_FPU_EMULATOR_H */

arch/mips/include/asm/gic.h

@@ -380,6 +380,7 @@ extern unsigned int gic_compare_int (void);
 extern cycle_t gic_read_count(void);
 extern cycle_t gic_read_compare(void);
 extern void gic_write_compare(cycle_t cnt);
+extern void gic_write_cpu_compare(cycle_t cnt, int cpu);
 extern void gic_send_ipi(unsigned int intr);
 extern unsigned int plat_ipi_call_int_xlate(unsigned int);
 extern unsigned int plat_ipi_resched_int_xlate(unsigned int);

arch/mips/include/asm/gio_device.h

@@ -50,7 +50,7 @@ static inline void gio_device_free(struct gio_device *dev)
 extern int gio_register_driver(struct gio_driver *);
 extern void gio_unregister_driver(struct gio_driver *);
 
-#define gio_get_drvdata(_dev)	     drv_get_drvdata(&(_dev)->dev)
-#define gio_set_drvdata(_dev, data)  drv_set_drvdata(&(_dev)->dev, (data))
+#define gio_get_drvdata(_dev)	     dev_get_drvdata(&(_dev)->dev)
+#define gio_set_drvdata(_dev, data)  dev_set_drvdata(&(_dev)->dev, (data))
 
 extern void gio_set_master(struct gio_device *);

arch/mips/include/asm/idle.h

@@ -1,6 +1,7 @@
 #ifndef __ASM_IDLE_H
 #define __ASM_IDLE_H
 
+#include <linux/cpuidle.h>
 #include <linux/linkage.h>
 
 extern void (*cpu_wait)(void);
@@ -20,4 +21,17 @@ static inline int address_is_in_r4k_wait_irqoff(unsigned long addr)
 	       addr < (unsigned long)__pastwait;
 }
 
+extern int mips_cpuidle_wait_enter(struct cpuidle_device *dev,
+				   struct cpuidle_driver *drv, int index);
+
+#define MIPS_CPUIDLE_WAIT_STATE {\
+	.enter			= mips_cpuidle_wait_enter,\
+	.exit_latency		= 1,\
+	.target_residency	= 1,\
+	.power_usage		= UINT_MAX,\
+	.flags			= CPUIDLE_FLAG_TIME_VALID,\
+	.name			= "wait",\
+	.desc			= "MIPS wait",\
+}
+
 #endif /* __ASM_IDLE_H  */

arch/mips/include/asm/irq.h

@@ -26,104 +26,8 @@ static inline int irq_canonicalize(int irq)
 #define irq_canonicalize(irq) (irq)	/* Sane hardware, sane code ... */
 #endif
 
-#ifdef CONFIG_MIPS_MT_SMTC
-
-struct irqaction;
-
-extern unsigned long irq_hwmask[];
-extern int setup_irq_smtc(unsigned int irq, struct irqaction * new,
-			  unsigned long hwmask);
-
-static inline void smtc_im_ack_irq(unsigned int irq)
-{
-	if (irq_hwmask[irq] & ST0_IM)
-		set_c0_status(irq_hwmask[irq] & ST0_IM);
-}
-
-#else
-
-static inline void smtc_im_ack_irq(unsigned int irq)
-{
-}
-
-#endif /* CONFIG_MIPS_MT_SMTC */
-
-#ifdef CONFIG_MIPS_MT_SMTC_IRQAFF
-#include <linux/cpumask.h>
-
-extern int plat_set_irq_affinity(struct irq_data *d,
-				 const struct cpumask *affinity, bool force);
-extern void smtc_forward_irq(struct irq_data *d);
-
-/*
- * IRQ affinity hook invoked at the beginning of interrupt dispatch
- * if option is enabled.
- *
- * Up through Linux 2.6.22 (at least) cpumask operations are very
- * inefficient on MIPS.	 Initial prototypes of SMTC IRQ affinity
- * used a "fast path" per-IRQ-descriptor cache of affinity information
- * to reduce latency.  As there is a project afoot to optimize the
- * cpumask implementations, this version is optimistically assuming
- * that cpumask.h macro overhead is reasonable during interrupt dispatch.
- */
-static inline int handle_on_other_cpu(unsigned int irq)
-{
-	struct irq_data *d = irq_get_irq_data(irq);
-
-	if (cpumask_test_cpu(smp_processor_id(), d->affinity))
-		return 0;
-	smtc_forward_irq(d);
-	return 1;
-}
-
-#else /* Not doing SMTC affinity */
-
-static inline int handle_on_other_cpu(unsigned int irq) { return 0; }
-
-#endif /* CONFIG_MIPS_MT_SMTC_IRQAFF */
-
-#ifdef CONFIG_MIPS_MT_SMTC_IM_BACKSTOP
-
-static inline void smtc_im_backstop(unsigned int irq)
-{
-	if (irq_hwmask[irq] & 0x0000ff00)
-		write_c0_tccontext(read_c0_tccontext() &
-				   ~(irq_hwmask[irq] & 0x0000ff00));
-}
-
-/*
- * Clear interrupt mask handling "backstop" if irq_hwmask
- * entry so indicates. This implies that the ack() or end()
- * functions will take over re-enabling the low-level mask.
- * Otherwise it will be done on return from exception.
- */
-static inline int smtc_handle_on_other_cpu(unsigned int irq)
-{
-	int ret = handle_on_other_cpu(irq);
-
-	if (!ret)
-		smtc_im_backstop(irq);
-	return ret;
-}
-
-#else
-
-static inline void smtc_im_backstop(unsigned int irq) { }
-static inline int smtc_handle_on_other_cpu(unsigned int irq)
-{
-	return handle_on_other_cpu(irq);
-}
-
-#endif
-
 extern void do_IRQ(unsigned int irq);
 
-#ifdef CONFIG_MIPS_MT_SMTC_IRQAFF
-
-extern void do_IRQ_no_affinity(unsigned int irq);
-
-#endif /* CONFIG_MIPS_MT_SMTC_IRQAFF */
-
 extern void arch_init_irq(void);
 extern void spurious_interrupt(void);
 

arch/mips/include/asm/irqflags.h

@@ -17,7 +17,7 @@
 #include <linux/stringify.h>
 #include <asm/hazards.h>
 
-#if defined(CONFIG_CPU_MIPSR2) && !defined(CONFIG_MIPS_MT_SMTC)
+#ifdef CONFIG_CPU_MIPSR2
 
 static inline void arch_local_irq_disable(void)
 {
@@ -118,30 +118,15 @@ void arch_local_irq_disable(void);
 unsigned long arch_local_irq_save(void);
 void arch_local_irq_restore(unsigned long flags);
 void __arch_local_irq_restore(unsigned long flags);
-#endif /* if defined(CONFIG_CPU_MIPSR2) && !defined(CONFIG_MIPS_MT_SMTC) */
-
-
-extern void smtc_ipi_replay(void);
+#endif /* CONFIG_CPU_MIPSR2 */
 
 static inline void arch_local_irq_enable(void)
 {
-#ifdef CONFIG_MIPS_MT_SMTC
-	/*
-	 * SMTC kernel needs to do a software replay of queued
-	 * IPIs, at the cost of call overhead on each local_irq_enable()
-	 */
-	smtc_ipi_replay();
-#endif
 	__asm__ __volatile__(
 	"	.set	push						\n"
 	"	.set	reorder						\n"
 	"	.set	noat						\n"
-#ifdef CONFIG_MIPS_MT_SMTC
-	"	mfc0	$1, $2, 1	# SMTC - clear TCStatus.IXMT	\n"
-	"	ori	$1, 0x400					\n"
-	"	xori	$1, 0x400					\n"
-	"	mtc0	$1, $2, 1					\n"
-#elif defined(CONFIG_CPU_MIPSR2)
+#if   defined(CONFIG_CPU_MIPSR2)
 	"	ei							\n"
 #else
 	"	mfc0	$1,$12						\n"
@@ -163,11 +148,7 @@ static inline unsigned long arch_local_save_flags(void)
 	asm __volatile__(
 	"	.set	push						\n"
 	"	.set	reorder						\n"
-#ifdef CONFIG_MIPS_MT_SMTC
-	"	mfc0	%[flags], $2, 1					\n"
-#else
 	"	mfc0	%[flags], $12					\n"
-#endif
 	"	.set	pop						\n"
 	: [flags] "=r" (flags));
 
@@ -177,14 +158,7 @@ static inline unsigned long arch_local_save_flags(void)
 
 static inline int arch_irqs_disabled_flags(unsigned long flags)
 {
-#ifdef CONFIG_MIPS_MT_SMTC
-	/*
-	 * SMTC model uses TCStatus.IXMT to disable interrupts for a thread/CPU
-	 */
-	return flags & 0x400;
-#else
 	return !(flags & 1);
-#endif
 }
 
 #endif /* #ifndef __ASSEMBLY__ */

arch/mips/include/asm/kvm_para.h

@@ -0,0 +1,109 @@
+#ifndef _ASM_MIPS_KVM_PARA_H
+#define _ASM_MIPS_KVM_PARA_H
+
+#include <uapi/asm/kvm_para.h>
+
+#define KVM_HYPERCALL ".word 0x42000028"
+
+/*
+ * Hypercalls for KVM.
+ *
+ * Hypercall number is passed in v0.
+ * Return value will be placed in v0.
+ * Up to 3 arguments are passed in a0, a1, and a2.
+ */
+static inline unsigned long kvm_hypercall0(unsigned long num)
+{
+	register unsigned long n asm("v0");
+	register unsigned long r asm("v0");
+
+	n = num;
+	__asm__ __volatile__(
+		KVM_HYPERCALL
+		: "=r" (r) : "r" (n) : "memory"
+		);
+
+	return r;
+}
+
+static inline unsigned long kvm_hypercall1(unsigned long num,
+					unsigned long arg0)
+{
+	register unsigned long n asm("v0");
+	register unsigned long r asm("v0");
+	register unsigned long a0 asm("a0");
+
+	n = num;
+	a0 = arg0;
+	__asm__ __volatile__(
+		KVM_HYPERCALL
+		: "=r" (r) : "r" (n), "r" (a0) : "memory"
+		);
+
+	return r;
+}
+
+static inline unsigned long kvm_hypercall2(unsigned long num,
+					unsigned long arg0, unsigned long arg1)
+{
+	register unsigned long n asm("v0");
+	register unsigned long r asm("v0");
+	register unsigned long a0 asm("a0");
+	register unsigned long a1 asm("a1");
+
+	n = num;
+	a0 = arg0;
+	a1 = arg1;
+	__asm__ __volatile__(
+		KVM_HYPERCALL
+		: "=r" (r) : "r" (n), "r" (a0), "r" (a1) : "memory"
+		);
+
+	return r;
+}
+
+static inline unsigned long kvm_hypercall3(unsigned long num,
+	unsigned long arg0, unsigned long arg1, unsigned long arg2)
+{
+	register unsigned long n asm("v0");
+	register unsigned long r asm("v0");
+	register unsigned long a0 asm("a0");
+	register unsigned long a1 asm("a1");
+	register unsigned long a2 asm("a2");
+
+	n = num;
+	a0 = arg0;
+	a1 = arg1;
+	a2 = arg2;
+	__asm__ __volatile__(
+		KVM_HYPERCALL
+		: "=r" (r) : "r" (n), "r" (a0), "r" (a1), "r" (a2) : "memory"
+		);
+
+	return r;
+}
+
+static inline bool kvm_check_and_clear_guest_paused(void)
+{
+	return false;
+}
+
+static inline unsigned int kvm_arch_para_features(void)
+{
+	return 0;
+}
+
+#ifdef CONFIG_MIPS_PARAVIRT
+static inline bool kvm_para_available(void)
+{
+	return true;
+}
+#else
+static inline bool kvm_para_available(void)
+{
+	return false;
+}
+#endif
+
+
+#endif /* _ASM_MIPS_KVM_PARA_H */

arch/mips/include/asm/mach-cavium-octeon/cpu-feature-overrides.h

@@ -22,7 +22,6 @@
 #define cpu_has_3k_cache	0
 #define cpu_has_4k_cache	0
 #define cpu_has_tx39_cache	0
-#define cpu_has_fpu		0
 #define cpu_has_counter		1
 #define cpu_has_watch		1
 #define cpu_has_divec		1

arch/mips/include/asm/mach-cavium-octeon/irq.h

@@ -35,6 +35,8 @@ enum octeon_irq {
 	OCTEON_IRQ_PCI_MSI2,
 	OCTEON_IRQ_PCI_MSI3,
 
+	OCTEON_IRQ_TWSI,
+	OCTEON_IRQ_TWSI2,
 	OCTEON_IRQ_RML,
 	OCTEON_IRQ_TIMER0,
 	OCTEON_IRQ_TIMER1,

arch/mips/include/asm/mach-ip22/cpu-feature-overrides.h

@@ -39,6 +39,10 @@
 #define cpu_has_nofpuex		0
 #define cpu_has_64bits		1
 
+#define cpu_has_mips_2		1
+#define cpu_has_mips_3		1
+#define cpu_has_mips_5		0
+
 #define cpu_has_mips32r1	0
 #define cpu_has_mips32r2	0
 #define cpu_has_mips64r1	0

arch/mips/include/asm/mach-malta/kernel-entry-init.h

@@ -80,36 +80,6 @@
 	.endm
 
 	.macro	kernel_entry_setup
-#ifdef CONFIG_MIPS_MT_SMTC
-	mfc0	t0, CP0_CONFIG
-	bgez	t0, 9f
-	mfc0	t0, CP0_CONFIG, 1
-	bgez	t0, 9f
-	mfc0	t0, CP0_CONFIG, 2
-	bgez	t0, 9f
-	mfc0	t0, CP0_CONFIG, 3
-	and	t0, 1<<2
-	bnez	t0, 0f
-9:
-	/* Assume we came from YAMON... */
-	PTR_LA	v0, 0x9fc00534	/* YAMON print */
-	lw	v0, (v0)
-	move	a0, zero
-	PTR_LA	a1, nonmt_processor
-	jal	v0
-
-	PTR_LA	v0, 0x9fc00520	/* YAMON exit */
-	lw	v0, (v0)
-	li	a0, 1
-	jal	v0
-
-1:	b	1b
-
-	__INITDATA
-nonmt_processor:
-	.asciz	"SMTC kernel requires the MT ASE to run\n"
-	__FINIT
-#endif
 
 #ifdef CONFIG_EVA
 	sync

arch/mips/include/asm/mach-malta/malta-pm.h

@@ -0,0 +1,37 @@
+/*
+ * Copyright (C) 2014 Imagination Technologies
+ * Author: Paul Burton <paul.burton@imgtec.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+#ifndef __ASM_MIPS_MACH_MALTA_PM_H__
+#define __ASM_MIPS_MACH_MALTA_PM_H__
+
+#include <asm/mips-boards/piix4.h>
+
+#ifdef CONFIG_MIPS_MALTA_PM
+
+/**
+ * mips_pm_suspend - enter a suspend state
+ * @state: the state to enter, one of PIIX4_FUNC3IO_PMCNTRL_SUS_TYP_*
+ *
+ * Enters a suspend state via the Malta's PIIX4. If the state to be entered
+ * is one which loses context (eg. SOFF) then this function will never
+ * return.
+ */
+extern int mips_pm_suspend(unsigned state);
+
+#else /* !CONFIG_MIPS_MALTA_PM */
+
+static inline int mips_pm_suspend(unsigned state)
+{
+	return -EINVAL;
+}
+
+#endif /* !CONFIG_MIPS_MALTA_PM */
+
+#endif /* __ASM_MIPS_MACH_MALTA_PM_H__ */

arch/mips/include/asm/mach-netlogic/topology.h

@@ -10,10 +10,12 @@
 
 #include <asm/mach-netlogic/multi-node.h>
 
+#ifdef CONFIG_SMP
 #define topology_physical_package_id(cpu)	cpu_to_node(cpu)
 #define topology_core_id(cpu)	(cpu_logical_map(cpu) / NLM_THREADS_PER_CORE)
 #define topology_thread_cpumask(cpu)		(&cpu_sibling_map[cpu])
 #define topology_core_cpumask(cpu)	cpumask_of_node(cpu_to_node(cpu))
+#endif
 
 #include <asm-generic/topology.h>
 

arch/mips/include/asm/mach-paravirt/cpu-feature-overrides.h

@@ -0,0 +1,36 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2013 Cavium, Inc.
+ */
+#ifndef __ASM_MACH_PARAVIRT_CPU_FEATURE_OVERRIDES_H
+#define __ASM_MACH_PARAVIRT_CPU_FEATURE_OVERRIDES_H
+
+#define cpu_has_4kex		1
+#define cpu_has_3k_cache	0
+#define cpu_has_tx39_cache	0
+#define cpu_has_counter		1
+#define cpu_has_llsc		1
+/*
+ * We Disable LL/SC on non SMP systems as it is faster to disable
+ * interrupts for atomic access than a LL/SC.
+ */
+#ifdef CONFIG_SMP
+# define kernel_uses_llsc	1
+#else
+# define kernel_uses_llsc	0
+#endif
+
+#ifdef CONFIG_CPU_CAVIUM_OCTEON
+#define cpu_dcache_line_size()	128
+#define cpu_icache_line_size()	128
+#define cpu_has_octeon_cache	1
+#define cpu_has_4k_cache	0
+#else
+#define cpu_has_octeon_cache	0
+#define cpu_has_4k_cache	1
+#endif
+
+#endif /* __ASM_MACH_PARAVIRT_CPU_FEATURE_OVERRIDES_H */

arch/mips/include/asm/mach-paravirt/irq.h

@@ -0,0 +1,19 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2013 Cavium, Inc.
+ */
+#ifndef __ASM_MACH_PARAVIRT_IRQ_H__
+#define  __ASM_MACH_PARAVIRT_IRQ_H__
+
+#define NR_IRQS 64
+#define MIPS_CPU_IRQ_BASE 1
+
+#define MIPS_IRQ_PCIA (MIPS_CPU_IRQ_BASE + 8)
+
+#define MIPS_IRQ_MBOX0 (MIPS_CPU_IRQ_BASE + 32)
+#define MIPS_IRQ_MBOX1 (MIPS_CPU_IRQ_BASE + 33)
+
+#endif /* __ASM_MACH_PARAVIRT_IRQ_H__ */

arch/mips/include/asm/mach-paravirt/kernel-entry-init.h

@@ -0,0 +1,50 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2013 Cavium, Inc
+ */
+#ifndef __ASM_MACH_PARAVIRT_KERNEL_ENTRY_H
+#define __ASM_MACH_PARAVIRT_KERNEL_ENTRY_H
+
+#define CP0_EBASE $15, 1
+
+	.macro  kernel_entry_setup
+	mfc0	t0, CP0_EBASE
+	andi	t0, t0, 0x3ff		# CPUNum
+	beqz	t0, 1f
+	# CPUs other than zero goto smp_bootstrap
+	j	smp_bootstrap
+
+1:
+	.endm
+
+/*
+ * Do SMP slave processor setup necessary before we can safely execute
+ * C code.
+ */
+	.macro  smp_slave_setup
+	mfc0	t0, CP0_EBASE
+	andi	t0, t0, 0x3ff		# CPUNum
+	slti	t1, t0, NR_CPUS
+	bnez	t1, 1f
+2:
+	di
+	wait
+	b	2b			# Unknown CPU, loop forever.
+1:
+	PTR_LA	t1, paravirt_smp_sp
+	PTR_SLL	t0, PTR_SCALESHIFT
+	PTR_ADDU t1, t1, t0
+3:
+	PTR_L	sp, 0(t1)
+	beqz	sp, 3b			# Spin until told to proceed.
+
+	PTR_LA	t1, paravirt_smp_gp
+	PTR_ADDU t1, t1, t0
+	sync
+	PTR_L	gp, 0(t1)
+	.endm
+
+#endif /* __ASM_MACH_PARAVIRT_KERNEL_ENTRY_H */

arch/mips/include/asm/mach-paravirt/war.h

@@ -0,0 +1,25 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2002, 2004, 2007 by Ralf Baechle <ralf@linux-mips.org>
+ * Copyright (C) 2013 Cavium Networks <support@caviumnetworks.com>
+ */
+#ifndef __ASM_MIPS_MACH_PARAVIRT_WAR_H
+#define __ASM_MIPS_MACH_PARAVIRT_WAR_H
+
+#define R4600_V1_INDEX_ICACHEOP_WAR	0
+#define R4600_V1_HIT_CACHEOP_WAR	0
+#define R4600_V2_HIT_CACHEOP_WAR	0
+#define R5432_CP0_INTERRUPT_WAR		0
+#define BCM1250_M3_WAR			0
+#define SIBYTE_1956_WAR			0
+#define MIPS4K_ICACHE_REFILL_WAR	0
+#define MIPS_CACHE_SYNC_WAR		0
+#define TX49XX_ICACHE_INDEX_INV_WAR	0
+#define ICACHE_REFILLS_WORKAROUND_WAR	0
+#define R10000_LLSC_WAR			0
+#define MIPS34K_MISSED_ITLB_WAR		0
+
+#endif /* __ASM_MIPS_MACH_PARAVIRT_WAR_H */

arch/mips/include/asm/mach-pmcs-msp71xx/msp_usb.h

@@ -25,11 +25,7 @@
 #ifndef MSP_USB_H_
 #define MSP_USB_H_
 
-#ifdef CONFIG_MSP_HAS_DUAL_USB
-#define NUM_USB_DEVS   2
-#else
 #define NUM_USB_DEVS   1
-#endif
 
 /* Register spaces for USB host 0 */
 #define MSP_USB0_MAB_START	(MSP_USB0_BASE + 0x0)

arch/mips/include/asm/mach-ralink/war.h

@@ -17,7 +17,6 @@
 #define MIPS4K_ICACHE_REFILL_WAR	0
 #define MIPS_CACHE_SYNC_WAR		0
 #define TX49XX_ICACHE_INDEX_INV_WAR	0
-#define RM9000_CDEX_SMP_WAR		0
 #define ICACHE_REFILLS_WORKAROUND_WAR	0
 #define R10000_LLSC_WAR			0
 #define MIPS34K_MISSED_ITLB_WAR		0

arch/mips/include/asm/mach-sead3/kernel-entry-init.h

@@ -10,37 +10,6 @@
 #define __ASM_MACH_MIPS_KERNEL_ENTRY_INIT_H
 
 	.macro	kernel_entry_setup
-#ifdef CONFIG_MIPS_MT_SMTC
-	mfc0	t0, CP0_CONFIG
-	bgez	t0, 9f
-	mfc0	t0, CP0_CONFIG, 1
-	bgez	t0, 9f
-	mfc0	t0, CP0_CONFIG, 2
-	bgez	t0, 9f
-	mfc0	t0, CP0_CONFIG, 3
-	and	t0, 1<<2
-	bnez	t0, 0f
-9 :
-	/* Assume we came from YAMON... */
-	PTR_LA	v0, 0x9fc00534	/* YAMON print */
-	lw	v0, (v0)
-	move	a0, zero
-	PTR_LA	a1, nonmt_processor
-	jal	v0
-
-	PTR_LA	v0, 0x9fc00520	/* YAMON exit */
-	lw	v0, (v0)
-	li	a0, 1
-	jal	v0
-
-1 :	b	1b
-
-	__INITDATA
-nonmt_processor :
-	.asciz	"SMTC kernel requires the MT ASE to run\n"
-	__FINIT
-0 :
-#endif
 	.endm
 
 /*

arch/mips/include/asm/mips-boards/piix4.h

@@ -55,4 +55,16 @@
 #define PIIX4_FUNC3_PMREGMISC			0x80
 #define   PIIX4_FUNC3_PMREGMISC_EN			(1 << 0)
 
+/* Power Management IO Space */
+#define PIIX4_FUNC3IO_PMSTS			0x00
+#define   PIIX4_FUNC3IO_PMSTS_PWRBTN_STS		(1 << 8)
+#define PIIX4_FUNC3IO_PMCNTRL			0x04
+#define   PIIX4_FUNC3IO_PMCNTRL_SUS_EN			(1 << 13)
+#define   PIIX4_FUNC3IO_PMCNTRL_SUS_TYP			(0x7 << 10)
+#define   PIIX4_FUNC3IO_PMCNTRL_SUS_TYP_SOFF		(0x0 << 10)
+#define   PIIX4_FUNC3IO_PMCNTRL_SUS_TYP_STR		(0x1 << 10)
+
+/* Data for magic special PCI cycle */
+#define PIIX4_SUSPEND_MAGIC			0x00120002
+
 #endif /* __ASM_MIPS_BOARDS_PIIX4_H */

arch/mips/include/asm/mips-cpc.h

@@ -72,7 +72,12 @@ static inline bool mips_cpc_present(void)
 #define MIPS_CPC_COCB_OFS	0x4000
 
 /* Macros to ease the creation of register access functions */
-#define BUILD_CPC_R_(name, off) \
+#define BUILD_CPC_R_(name, off)					\
+static inline u32 *addr_cpc_##name(void)			\
+{								\
+	return (u32 *)(mips_cpc_base + (off));			\
+}								\
+								\
 static inline u32 read_cpc_##name(void)				\
 {								\
 	return __raw_readl(mips_cpc_base + (off));		\
@@ -147,4 +152,31 @@ BUILD_CPC_Cx_RW(other,		0x10)
 #define CPC_Cx_OTHER_CORENUM_SHF		16
 #define CPC_Cx_OTHER_CORENUM_MSK		(_ULCAST_(0xff) << 16)
 
+#ifdef CONFIG_MIPS_CPC
+
+/**
+ * mips_cpc_lock_other - lock access to another core
+ * core: the other core to be accessed
+ *
+ * Call before operating upon a core via the 'other' register region in
+ * order to prevent the region being moved during access. Must be followed
+ * by a call to mips_cpc_unlock_other.
+ */
+extern void mips_cpc_lock_other(unsigned int core);
+
+/**
+ * mips_cpc_unlock_other - unlock access to another core
+ *
+ * Call after operating upon another core via the 'other' register region.
+ * Must be called after mips_cpc_lock_other.
+ */
+extern void mips_cpc_unlock_other(void);
+
+#else /* !CONFIG_MIPS_CPC */
+
+static inline void mips_cpc_lock_other(unsigned int core) { }
+static inline void mips_cpc_unlock_other(void) { }
+
+#endif /* !CONFIG_MIPS_CPC */
+
 #endif /* __MIPS_ASM_MIPS_CPC_H__ */

arch/mips/include/asm/mips_mt.h

@@ -1,7 +1,6 @@
 /*
- * Definitions and decalrations for MIPS MT support
- * that are common between SMTC, VSMP, and/or AP/SP
- * kernel models.
+ * Definitions and decalrations for MIPS MT support that are common between
+ * the VSMP, and AP/SP kernel models.
  */
 #ifndef __ASM_MIPS_MT_H
 #define __ASM_MIPS_MT_H

arch/mips/include/asm/mipsmtregs.h

@@ -36,6 +36,8 @@
 
 #define read_c0_tcbind()		__read_32bit_c0_register($2, 2)
 
+#define write_c0_tchalt(val)		__write_32bit_c0_register($2, 4, val)
+
 #define read_c0_tccontext()		__read_32bit_c0_register($2, 5)
 #define write_c0_tccontext(val)		__write_32bit_c0_register($2, 5, val)
 

arch/mips/include/asm/mipsregs.h

@@ -709,11 +709,18 @@
 #ifndef __ASSEMBLY__
 
 /*
- * Macros for handling the ISA mode bit for microMIPS.
+ * Macros for handling the ISA mode bit for MIPS16 and microMIPS.
  */
+#if defined(CONFIG_SYS_SUPPORTS_MIPS16) || \
+    defined(CONFIG_SYS_SUPPORTS_MICROMIPS)
 #define get_isa16_mode(x)		((x) & 0x1)
 #define msk_isa16_mode(x)		((x) & ~0x1)
 #define set_isa16_mode(x)		do { (x) |= 0x1; } while(0)
+#else
+#define get_isa16_mode(x)		0
+#define msk_isa16_mode(x)		(x)
+#define set_isa16_mode(x)		do { } while(0)
+#endif
 
 /*
  * microMIPS instructions can be 16-bit or 32-bit in length. This
@@ -1007,19 +1014,8 @@ do {									\
 #define write_c0_compare3(val)	__write_32bit_c0_register($11, 7, val)
 
 #define read_c0_status()	__read_32bit_c0_register($12, 0)
-#ifdef CONFIG_MIPS_MT_SMTC
-#define write_c0_status(val)						\
-do {									\
-	__write_32bit_c0_register($12, 0, val);				\
-	__ehb();							\
-} while (0)
-#else
-/*
- * Legacy non-SMTC code, which may be hazardous
- * but which might not support EHB
- */
+
 #define write_c0_status(val)	__write_32bit_c0_register($12, 0, val)
-#endif /* CONFIG_MIPS_MT_SMTC */
 
 #define read_c0_cause()		__read_32bit_c0_register($13, 0)
 #define write_c0_cause(val)	__write_32bit_c0_register($13, 0, val)
@@ -1743,11 +1739,6 @@ static inline void tlb_write_random(void)
 /*
  * Manipulate bits in a c0 register.
  */
-#ifndef CONFIG_MIPS_MT_SMTC
-/*
- * SMTC Linux requires shutting-down microthread scheduling
- * during CP0 register read-modify-write sequences.
- */
 #define __BUILD_SET_C0(name)					\
 static inline unsigned int					\
 set_c0_##name(unsigned int set)					\
@@ -1786,121 +1777,6 @@ change_c0_##name(unsigned int change, unsigned int val)		\
 	return res;						\
 }
 
-#else /* SMTC versions that manage MT scheduling */
-
-#include <linux/irqflags.h>
-
-/*
- * This is a duplicate of dmt() in mipsmtregs.h to avoid problems with
- * header file recursion.
- */
-static inline unsigned int __dmt(void)
-{
-	int res;
-
-	__asm__ __volatile__(
-	"	.set	push						\n"
-	"	.set	mips32r2					\n"
-	"	.set	noat						\n"
-	"	.word	0x41610BC1			# dmt $1	\n"
-	"	ehb							\n"
-	"	move	%0, $1						\n"
-	"	.set	pop						\n"
-	: "=r" (res));
-
-	instruction_hazard();
-
-	return res;
-}
-
-#define __VPECONTROL_TE_SHIFT	15
-#define __VPECONTROL_TE		(1UL << __VPECONTROL_TE_SHIFT)
-
-#define __EMT_ENABLE		__VPECONTROL_TE
-
-static inline void __emt(unsigned int previous)
-{
-	if ((previous & __EMT_ENABLE))
-		__asm__ __volatile__(
-		"	.set	mips32r2				\n"
-		"	.word	0x41600be1		# emt		\n"
-		"	ehb						\n"
-		"	.set	mips0					\n");
-}
-
-static inline void __ehb(void)
-{
-	__asm__ __volatile__(
-	"	.set	mips32r2					\n"
-	"	ehb							\n"		"	.set	mips0						\n");
-}
-
-/*
- * Note that local_irq_save/restore affect TC-specific IXMT state,
- * not Status.IE as in non-SMTC kernel.
- */
-
-#define __BUILD_SET_C0(name)					\
-static inline unsigned int					\
-set_c0_##name(unsigned int set)					\
-{								\
-	unsigned int res;					\
-	unsigned int new;					\
-	unsigned int omt;					\
-	unsigned long flags;					\
-								\
-	local_irq_save(flags);					\
-	omt = __dmt();						\
-	res = read_c0_##name();					\
-	new = res | set;					\
-	write_c0_##name(new);					\
-	__emt(omt);						\
-	local_irq_restore(flags);				\
-								\
-	return res;						\
-}								\
-								\
-static inline unsigned int					\
-clear_c0_##name(unsigned int clear)				\
-{								\
-	unsigned int res;					\
-	unsigned int new;					\
-	unsigned int omt;					\
-	unsigned long flags;					\
-								\
-	local_irq_save(flags);					\
-	omt = __dmt();						\
-	res = read_c0_##name();					\
-	new = res & ~clear;					\
-	write_c0_##name(new);					\
-	__emt(omt);						\
-	local_irq_restore(flags);				\
-								\
-	return res;						\
-}								\
-								\
-static inline unsigned int					\
-change_c0_##name(unsigned int change, unsigned int newbits)	\
-{								\
-	unsigned int res;					\
-	unsigned int new;					\
-	unsigned int omt;					\
-	unsigned long flags;					\
-								\
-	local_irq_save(flags);					\
-								\
-	omt = __dmt();						\
-	res = read_c0_##name();					\
-	new = res & ~change;					\
-	new |= (newbits & change);				\
-	write_c0_##name(new);					\
-	__emt(omt);						\
-	local_irq_restore(flags);				\
-								\
-	return res;						\
-}
-#endif
-
 __BUILD_SET_C0(status)
 __BUILD_SET_C0(cause)
 __BUILD_SET_C0(config)
@@ -1916,6 +1792,15 @@ __BUILD_SET_C0(brcm_cmt_ctrl)
 __BUILD_SET_C0(brcm_config)
 __BUILD_SET_C0(brcm_mode)
 
+/*
+ * Return low 10 bits of ebase.
+ * Note that under KVM (MIPSVZ) this returns vcpu id.
+ */
+static inline unsigned int get_ebase_cpunum(void)
+{
+	return read_c0_ebase() & 0x3ff;
+}
+
 #endif /* !__ASSEMBLY__ */
 
 #endif /* _ASM_MIPSREGS_H */

arch/mips/include/asm/mmu_context.h

@@ -18,10 +18,6 @@
 #include <asm/cacheflush.h>
 #include <asm/hazards.h>
 #include <asm/tlbflush.h>
-#ifdef CONFIG_MIPS_MT_SMTC
-#include <asm/mipsmtregs.h>
-#include <asm/smtc.h>
-#endif /* SMTC */
 #include <asm-generic/mm_hooks.h>
 
 #define TLBMISS_HANDLER_SETUP_PGD(pgd)					\
@@ -31,11 +27,15 @@ do {									\
 } while (0)
 
 #ifdef CONFIG_MIPS_PGD_C0_CONTEXT
+
+#define TLBMISS_HANDLER_RESTORE()					\
+	write_c0_xcontext((unsigned long) smp_processor_id() <<		\
+			  SMP_CPUID_REGSHIFT)
+
 #define TLBMISS_HANDLER_SETUP()						\
 	do {								\
 		TLBMISS_HANDLER_SETUP_PGD(swapper_pg_dir);		\
-		write_c0_xcontext((unsigned long) smp_processor_id() <<	\
-						SMP_CPUID_REGSHIFT);	\
+		TLBMISS_HANDLER_RESTORE();				\
 	} while (0)
 
 #else /* !CONFIG_MIPS_PGD_C0_CONTEXT: using  pgd_current*/
@@ -47,9 +47,12 @@ do {									\
  */
 extern unsigned long pgd_current[];
 
-#define TLBMISS_HANDLER_SETUP()						\
+#define TLBMISS_HANDLER_RESTORE()					\
 	write_c0_context((unsigned long) smp_processor_id() <<		\
-						SMP_CPUID_REGSHIFT);	\
+			 SMP_CPUID_REGSHIFT)
+
+#define TLBMISS_HANDLER_SETUP()						\
+	TLBMISS_HANDLER_RESTORE();					\
 	back_to_back_c0_hazard();					\
 	TLBMISS_HANDLER_SETUP_PGD(swapper_pg_dir)
 #endif /* CONFIG_MIPS_PGD_C0_CONTEXT*/
@@ -63,13 +66,6 @@ extern unsigned long pgd_current[];
 #define ASID_INC	0x10
 #define ASID_MASK	0xff0
 
-#elif defined(CONFIG_MIPS_MT_SMTC)
-
-#define ASID_INC	0x1
-extern unsigned long smtc_asid_mask;
-#define ASID_MASK	(smtc_asid_mask)
-#define HW_ASID_MASK	0xff
-/* End SMTC/34K debug hack */
 #else /* FIXME: not correct for R6000 */
 
 #define ASID_INC	0x1
@@ -92,7 +88,6 @@ static inline void enter_lazy_tlb(struct mm_struct *mm, struct task_struct *tsk)
 #define ASID_VERSION_MASK  ((unsigned long)~(ASID_MASK|(ASID_MASK-1)))
 #define ASID_FIRST_VERSION ((unsigned long)(~ASID_VERSION_MASK) + 1)
 
-#ifndef CONFIG_MIPS_MT_SMTC
 /* Normal, classic MIPS get_new_mmu_context */
 static inline void
 get_new_mmu_context(struct mm_struct *mm, unsigned long cpu)
@@ -115,12 +110,6 @@ get_new_mmu_context(struct mm_struct *mm, unsigned long cpu)
 	cpu_context(cpu, mm) = asid_cache(cpu) = asid;
 }
 
-#else /* CONFIG_MIPS_MT_SMTC */
-
-#define get_new_mmu_context(mm, cpu) smtc_get_new_mmu_context((mm), (cpu))
-
-#endif /* CONFIG_MIPS_MT_SMTC */
-
 /*
  * Initialize the context related info for a new mm_struct
  * instance.
@@ -141,46 +130,12 @@ static inline void switch_mm(struct mm_struct *prev, struct mm_struct *next,
 {
 	unsigned int cpu = smp_processor_id();
 	unsigned long flags;
-#ifdef CONFIG_MIPS_MT_SMTC
-	unsigned long oldasid;
-	unsigned long mtflags;
-	int mytlb = (smtc_status & SMTC_TLB_SHARED) ? 0 : cpu_data[cpu].vpe_id;
 	local_irq_save(flags);
-	mtflags = dvpe();
-#else /* Not SMTC */
-	local_irq_save(flags);
-#endif /* CONFIG_MIPS_MT_SMTC */
 
 	/* Check if our ASID is of an older version and thus invalid */
 	if ((cpu_context(cpu, next) ^ asid_cache(cpu)) & ASID_VERSION_MASK)
 		get_new_mmu_context(next, cpu);
-#ifdef CONFIG_MIPS_MT_SMTC
-	/*
-	 * If the EntryHi ASID being replaced happens to be
-	 * the value flagged at ASID recycling time as having
-	 * an extended life, clear the bit showing it being
-	 * in use by this "CPU", and if that's the last bit,
-	 * free up the ASID value for use and flush any old
-	 * instances of it from the TLB.
-	 */
-	oldasid = (read_c0_entryhi() & ASID_MASK);
-	if(smtc_live_asid[mytlb][oldasid]) {
-		smtc_live_asid[mytlb][oldasid] &= ~(0x1 << cpu);
-		if(smtc_live_asid[mytlb][oldasid] == 0)
-			smtc_flush_tlb_asid(oldasid);
-	}
-	/*
-	 * Tread softly on EntryHi, and so long as we support
-	 * having ASID_MASK smaller than the hardware maximum,
-	 * make sure no "soft" bits become "hard"...
-	 */
-	write_c0_entryhi((read_c0_entryhi() & ~HW_ASID_MASK) |
-			 cpu_asid(cpu, next));
-	ehb(); /* Make sure it propagates to TCStatus */
-	evpe(mtflags);
-#else
 	write_c0_entryhi(cpu_asid(cpu, next));
-#endif /* CONFIG_MIPS_MT_SMTC */
 	TLBMISS_HANDLER_SETUP_PGD(next->pgd);
 
 	/*
@@ -213,34 +168,12 @@ activate_mm(struct mm_struct *prev, struct mm_struct *next)
 	unsigned long flags;
 	unsigned int cpu = smp_processor_id();
 
-#ifdef CONFIG_MIPS_MT_SMTC
-	unsigned long oldasid;
-	unsigned long mtflags;
-	int mytlb = (smtc_status & SMTC_TLB_SHARED) ? 0 : cpu_data[cpu].vpe_id;
-#endif /* CONFIG_MIPS_MT_SMTC */
-
 	local_irq_save(flags);
 
 	/* Unconditionally get a new ASID.  */
 	get_new_mmu_context(next, cpu);
 
-#ifdef CONFIG_MIPS_MT_SMTC
-	/* See comments for similar code above */
-	mtflags = dvpe();
-	oldasid = read_c0_entryhi() & ASID_MASK;
-	if(smtc_live_asid[mytlb][oldasid]) {
-		smtc_live_asid[mytlb][oldasid] &= ~(0x1 << cpu);
-		if(smtc_live_asid[mytlb][oldasid] == 0)
-			 smtc_flush_tlb_asid(oldasid);
-	}
-	/* See comments for similar code above */
-	write_c0_entryhi((read_c0_entryhi() & ~HW_ASID_MASK) |
-			 cpu_asid(cpu, next));
-	ehb(); /* Make sure it propagates to TCStatus */
-	evpe(mtflags);
-#else
 	write_c0_entryhi(cpu_asid(cpu, next));
-#endif /* CONFIG_MIPS_MT_SMTC */
 	TLBMISS_HANDLER_SETUP_PGD(next->pgd);
 
 	/* mark mmu ownership change */
@@ -258,48 +191,15 @@ static inline void
 drop_mmu_context(struct mm_struct *mm, unsigned cpu)
 {
 	unsigned long flags;
-#ifdef CONFIG_MIPS_MT_SMTC
-	unsigned long oldasid;
-	/* Can't use spinlock because called from TLB flush within DVPE */
-	unsigned int prevvpe;
-	int mytlb = (smtc_status & SMTC_TLB_SHARED) ? 0 : cpu_data[cpu].vpe_id;
-#endif /* CONFIG_MIPS_MT_SMTC */
 
 	local_irq_save(flags);
 
 	if (cpumask_test_cpu(cpu, mm_cpumask(mm)))  {
 		get_new_mmu_context(mm, cpu);
-#ifdef CONFIG_MIPS_MT_SMTC
-		/* See comments for similar code above */
-		prevvpe = dvpe();
-		oldasid = (read_c0_entryhi() & ASID_MASK);
-		if (smtc_live_asid[mytlb][oldasid]) {
-			smtc_live_asid[mytlb][oldasid] &= ~(0x1 << cpu);
-			if(smtc_live_asid[mytlb][oldasid] == 0)
-				smtc_flush_tlb_asid(oldasid);
-		}
-		/* See comments for similar code above */
-		write_c0_entryhi((read_c0_entryhi() & ~HW_ASID_MASK)
-				| cpu_asid(cpu, mm));
-		ehb(); /* Make sure it propagates to TCStatus */
-		evpe(prevvpe);
-#else /* not CONFIG_MIPS_MT_SMTC */
 		write_c0_entryhi(cpu_asid(cpu, mm));
-#endif /* CONFIG_MIPS_MT_SMTC */
 	} else {
 		/* will get a new context next time */
-#ifndef CONFIG_MIPS_MT_SMTC
 		cpu_context(cpu, mm) = 0;
-#else /* SMTC */
-		int i;
-
-		/* SMTC shares the TLB (and ASIDs) across VPEs */
-		for_each_online_cpu(i) {
-		    if((smtc_status & SMTC_TLB_SHARED)
-		    || (cpu_data[i].vpe_id == cpu_data[cpu].vpe_id))
-			cpu_context(i, mm) = 0;
-		}
-#endif /* CONFIG_MIPS_MT_SMTC */
 	}
 	local_irq_restore(flags);
 }

arch/mips/include/asm/module.h

@@ -144,13 +144,7 @@ search_module_dbetables(unsigned long addr)
 #define MODULE_KERNEL_TYPE "64BIT "
 #endif
 
-#ifdef CONFIG_MIPS_MT_SMTC
-#define MODULE_KERNEL_SMTC "MT_SMTC "
-#else
-#define MODULE_KERNEL_SMTC ""
-#endif
-
 #define MODULE_ARCH_VERMAGIC \
-	MODULE_PROC_FAMILY MODULE_KERNEL_TYPE MODULE_KERNEL_SMTC
+	MODULE_PROC_FAMILY MODULE_KERNEL_TYPE
 
 #endif /* _ASM_MODULE_H */

arch/mips/include/asm/msa.h

@@ -84,7 +84,7 @@ static inline void write_msa_##name(unsigned int val)		\
 	__asm__ __volatile__(					\
 	"	.set	push\n"					\
 	"	.set	msa\n"					\
-	"	cfcmsa	$" #cs ", %0\n"				\
+	"	ctcmsa	$" #cs ", %0\n"				\
 	"	.set	pop\n"					\
 	: : "r"(val));						\
 }
@@ -96,6 +96,13 @@ static inline void write_msa_##name(unsigned int val)		\
  * allow compilation with toolchains that do not support MSA. Once all
  * toolchains in use support MSA these can be removed.
  */
+#ifdef CONFIG_CPU_MICROMIPS
+#define CFC_MSA_INSN	0x587e0056
+#define CTC_MSA_INSN	0x583e0816
+#else
+#define CFC_MSA_INSN	0x787e0059
+#define CTC_MSA_INSN	0x783e0819
+#endif
 
 #define __BUILD_MSA_CTL_REG(name, cs)				\
 static inline unsigned int read_msa_##name(void)		\
@@ -104,7 +111,8 @@ static inline unsigned int read_msa_##name(void)		\
 	__asm__ __volatile__(					\
 	"	.set	push\n"					\
 	"	.set	noat\n"					\
-	"	.word	0x787e0059 | (" #cs " << 11)\n"		\
+	"	.insn\n"					\
+	"	.word	#CFC_MSA_INSN | (" #cs " << 11)\n"	\
 	"	move	%0, $1\n"				\
 	"	.set	pop\n"					\
 	: "=r"(reg));						\
@@ -117,7 +125,8 @@ static inline void write_msa_##name(unsigned int val)		\
 	"	.set	push\n"					\
 	"	.set	noat\n"					\
 	"	move	$1, %0\n"				\
-	"	.word	0x783e0819 | (" #cs " << 6)\n"		\
+	"	.insn\n"					\
+	"	.word	#CTC_MSA_INSN | (" #cs " << 6)\n"	\
 	"	.set	pop\n"					\
 	: : "r"(val));						\
 }

arch/mips/include/asm/netlogic/mips-extns.h

@@ -146,9 +146,10 @@ static inline int hard_smp_processor_id(void)
 
 static inline int nlm_nodeid(void)
 {
-	uint32_t prid = read_c0_prid();
+	uint32_t prid = read_c0_prid() & PRID_IMP_MASK;
 
-	if ((prid & 0xff00) == PRID_IMP_NETLOGIC_XLP9XX)
+	if ((prid == PRID_IMP_NETLOGIC_XLP9XX) ||
+			(prid == PRID_IMP_NETLOGIC_XLP5XX))
 		return (__read_32bit_c0_register($15, 1) >> 7) & 0x7;
 	else
 		return (__read_32bit_c0_register($15, 1) >> 5) & 0x3;

arch/mips/include/asm/netlogic/xlp-hal/iomap.h

@@ -74,6 +74,8 @@
 #define XLP_IO_USB_OHCI2_OFFSET(node)	XLP_HDR_OFFSET(node, 0, 2, 4)
 #define XLP_IO_USB_OHCI3_OFFSET(node)	XLP_HDR_OFFSET(node, 0, 2, 5)
 
+#define XLP_IO_SATA_OFFSET(node)	XLP_HDR_OFFSET(node, 0, 3, 2)
+
 /* XLP2xx has an updated USB block */
 #define XLP2XX_IO_USB_OFFSET(node, i)	XLP_HDR_OFFSET(node, 0, 4, i)
 #define XLP2XX_IO_USB_XHCI0_OFFSET(node)	XLP_HDR_OFFSET(node, 0, 4, 1)
@@ -103,13 +105,11 @@
 #define XLP_IO_SYS_OFFSET(node)		XLP_HDR_OFFSET(node, 0, 6, 5)
 #define XLP_IO_JTAG_OFFSET(node)	XLP_HDR_OFFSET(node, 0, 6, 6)
 
+/* Flash */
 #define XLP_IO_NOR_OFFSET(node)		XLP_HDR_OFFSET(node, 0, 7, 0)
 #define XLP_IO_NAND_OFFSET(node)	XLP_HDR_OFFSET(node, 0, 7, 1)
 #define XLP_IO_SPI_OFFSET(node)		XLP_HDR_OFFSET(node, 0, 7, 2)
-/* SD flash */
-#define XLP_IO_SD_OFFSET(node)		XLP_HDR_OFFSET(node, 0, 7, 3)
-#define XLP_IO_MMC_OFFSET(node, slot)	\
-		((XLP_IO_SD_OFFSET(node))+(slot*0x100)+XLP_IO_PCI_HDRSZ)
+#define XLP_IO_MMC_OFFSET(node)		XLP_HDR_OFFSET(node, 0, 7, 3)
 
 /* Things have changed drastically in XLP 9XX */
 #define XLP9XX_HDR_OFFSET(n, d, f)	\
@@ -120,6 +120,8 @@
 #define XLP9XX_IO_UART_OFFSET(node)	XLP9XX_HDR_OFFSET(node, 2, 2)
 #define XLP9XX_IO_SYS_OFFSET(node)	XLP9XX_HDR_OFFSET(node, 6, 0)
 #define XLP9XX_IO_FUSE_OFFSET(node)	XLP9XX_HDR_OFFSET(node, 6, 1)
+#define XLP9XX_IO_CLOCK_OFFSET(node)	XLP9XX_HDR_OFFSET(node, 6, 2)
+#define XLP9XX_IO_POWER_OFFSET(node)	XLP9XX_HDR_OFFSET(node, 6, 3)
 #define XLP9XX_IO_JTAG_OFFSET(node)	XLP9XX_HDR_OFFSET(node, 6, 4)
 
 #define XLP9XX_IO_PCIE_OFFSET(node, i)	XLP9XX_HDR_OFFSET(node, 1, i)
@@ -135,11 +137,11 @@
 /* XLP9XX on-chip SATA controller */
 #define XLP9XX_IO_SATA_OFFSET(node)		XLP9XX_HDR_OFFSET(node, 3, 2)
 
+/* Flash */
 #define XLP9XX_IO_NOR_OFFSET(node)		XLP9XX_HDR_OFFSET(node, 7, 0)
 #define XLP9XX_IO_NAND_OFFSET(node)		XLP9XX_HDR_OFFSET(node, 7, 1)
 #define XLP9XX_IO_SPI_OFFSET(node)		XLP9XX_HDR_OFFSET(node, 7, 2)
-/* SD flash */
-#define XLP9XX_IO_MMCSD_OFFSET(node)		XLP9XX_HDR_OFFSET(node, 7, 3)
+#define XLP9XX_IO_MMC_OFFSET(node)		XLP9XX_HDR_OFFSET(node, 7, 3)
 
 /* PCI config header register id's */
 #define XLP_PCI_CFGREG0			0x00
@@ -186,8 +188,10 @@
 #define PCI_DEVICE_ID_NLM_NOR		0x1015
 #define PCI_DEVICE_ID_NLM_NAND		0x1016
 #define PCI_DEVICE_ID_NLM_MMC		0x1018
-#define PCI_DEVICE_ID_NLM_XHCI		0x101d
+#define PCI_DEVICE_ID_NLM_SATA		0x101A
+#define PCI_DEVICE_ID_NLM_XHCI		0x101D
 
+#define PCI_DEVICE_ID_XLP9XX_MMC	0x9018
 #define PCI_DEVICE_ID_XLP9XX_SATA	0x901A
 #define PCI_DEVICE_ID_XLP9XX_XHCI	0x901D
 

arch/mips/include/asm/netlogic/xlp-hal/pcibus.h

@@ -69,6 +69,20 @@
 #define PCIE_9XX_BYTE_SWAP_IO_BASE	0x25e
 #define PCIE_9XX_BYTE_SWAP_IO_LIM	0x25f
 
+#define PCIE_9XX_BRIDGE_MSIX_ADDR_BASE	0x264
+#define PCIE_9XX_BRIDGE_MSIX_ADDR_LIMIT	0x265
+#define PCIE_9XX_MSI_STATUS		0x283
+#define PCIE_9XX_MSI_EN			0x284
+/* 128 MSIX vectors available in 9xx */
+#define PCIE_9XX_MSIX_STATUS0		0x286
+#define PCIE_9XX_MSIX_STATUSX(n)	(n + 0x286)
+#define PCIE_9XX_MSIX_VEC		0x296
+#define PCIE_9XX_MSIX_VECX(n)		(n + 0x296)
+#define PCIE_9XX_INT_STATUS0		0x397
+#define PCIE_9XX_INT_STATUS1		0x398
+#define PCIE_9XX_INT_EN0		0x399
+#define PCIE_9XX_INT_EN1		0x39a
+
 /* other */
 #define PCIE_NLINKS			4
 

arch/mips/include/asm/netlogic/xlp-hal/pic.h

@@ -199,6 +199,10 @@
 #define PIC_IRT_PCIE_LINK_3_INDEX	81
 #define PIC_IRT_PCIE_LINK_INDEX(num)	((num) + PIC_IRT_PCIE_LINK_0_INDEX)
 
+#define PIC_9XX_IRT_PCIE_LINK_0_INDEX	191
+#define PIC_9XX_IRT_PCIE_LINK_INDEX(num) \
+				((num) + PIC_9XX_IRT_PCIE_LINK_0_INDEX)
+
 #define PIC_CLOCK_TIMER			7
 
 #if !defined(LOCORE) && !defined(__ASSEMBLY__)

arch/mips/include/asm/netlogic/xlp-hal/sys.h

@@ -118,6 +118,10 @@
 #define SYS_SCRTCH3				0x4c
 
 /* PLL registers XLP2XX */
+#define SYS_CPU_PLL_CTRL0(core)			(0x1c0 + (core * 4))
+#define SYS_CPU_PLL_CTRL1(core)			(0x1c1 + (core * 4))
+#define SYS_CPU_PLL_CTRL2(core)			(0x1c2 + (core * 4))
+#define SYS_CPU_PLL_CTRL3(core)			(0x1c3 + (core * 4))
 #define SYS_PLL_CTRL0				0x240
 #define SYS_PLL_CTRL1				0x241
 #define SYS_PLL_CTRL2				0x242
@@ -147,6 +151,32 @@
 #define SYS_SYS_PLL_MEM_REQ			0x2a3
 #define SYS_PLL_MEM_STAT			0x2a4
 
+/* PLL registers XLP9XX */
+#define SYS_9XX_CPU_PLL_CTRL0(core)		(0xc0 + (core * 4))
+#define SYS_9XX_CPU_PLL_CTRL1(core)		(0xc1 + (core * 4))
+#define SYS_9XX_CPU_PLL_CTRL2(core)		(0xc2 + (core * 4))
+#define SYS_9XX_CPU_PLL_CTRL3(core)		(0xc3 + (core * 4))
+#define SYS_9XX_DMC_PLL_CTRL0			0x140
+#define SYS_9XX_DMC_PLL_CTRL1			0x141
+#define SYS_9XX_DMC_PLL_CTRL2			0x142
+#define SYS_9XX_DMC_PLL_CTRL3			0x143
+#define SYS_9XX_PLL_CTRL0			0x144
+#define SYS_9XX_PLL_CTRL1			0x145
+#define SYS_9XX_PLL_CTRL2			0x146
+#define SYS_9XX_PLL_CTRL3			0x147
+
+#define SYS_9XX_PLL_CTRL0_DEVX(x)		(0x148 + (x) * 4)
+#define SYS_9XX_PLL_CTRL1_DEVX(x)		(0x149 + (x) * 4)
+#define SYS_9XX_PLL_CTRL2_DEVX(x)		(0x14a + (x) * 4)
+#define SYS_9XX_PLL_CTRL3_DEVX(x)		(0x14b + (x) * 4)
+
+#define SYS_9XX_CPU_PLL_CHG_CTRL		0x188
+#define SYS_9XX_PLL_CHG_CTRL			0x189
+#define SYS_9XX_CLK_DEV_DIS			0x18a
+#define SYS_9XX_CLK_DEV_SEL			0x18b
+#define SYS_9XX_CLK_DEV_DIV			0x18d
+#define SYS_9XX_CLK_DEV_CHG			0x18f
+
 /* Registers changed on 9XX */
 #define SYS_9XX_POWER_ON_RESET_CFG		0x00
 #define SYS_9XX_CHIP_RESET			0x01
@@ -170,6 +200,11 @@
 #define nlm_get_fuse_regbase(node)	\
 			(nlm_get_fuse_pcibase(node) + XLP_IO_PCI_HDRSZ)
 
+#define nlm_get_clock_pcibase(node)	\
+			nlm_pcicfg_base(XLP9XX_IO_CLOCK_OFFSET(node))
+#define nlm_get_clock_regbase(node)	\
+			(nlm_get_clock_pcibase(node) + XLP_IO_PCI_HDRSZ)
+
 unsigned int nlm_get_pic_frequency(int node);
 #endif
 #endif

arch/mips/include/asm/netlogic/xlp-hal/xlp.h

@@ -58,6 +58,10 @@
 #define PIC_I2C_1_IRQ			31
 #define PIC_I2C_2_IRQ			32
 #define PIC_I2C_3_IRQ			33
+#define PIC_SPI_IRQ			34
+#define PIC_NAND_IRQ			37
+#define PIC_SATA_IRQ			38
+#define PIC_GPIO_IRQ			39
 
 #define PIC_PCIE_LINK_MSI_IRQ_BASE	44	/* 44 - 47 MSI IRQ */
 #define PIC_PCIE_LINK_MSI_IRQ(i)	(44 + (i))
@@ -66,8 +70,9 @@
 #define PIC_PCIE_MSIX_IRQ_BASE		48	/* 48 - 51 MSI-X IRQ */
 #define PIC_PCIE_MSIX_IRQ(i)		(48 + (i))
 
-#define NLM_MSIX_VEC_BASE		96	/* 96 - 127 - MSIX mapped */
-#define NLM_MSI_VEC_BASE		128	/* 128 -255 - MSI mapped */
+/* XLP9xx and XLP8xx has 128 and 32 MSIX vectors respectively */
+#define NLM_MSIX_VEC_BASE		96	/* 96 - 223 - MSIX mapped */
+#define NLM_MSI_VEC_BASE		224	/* 224 -351 - MSI mapped */
 
 #define NLM_PIC_INDIRECT_VEC_BASE	512
 #define NLM_GPIO_VEC_BASE		768
@@ -95,17 +100,19 @@ void *xlp_dt_init(void *fdtp);
 
 static inline int cpu_is_xlpii(void)
 {
-	int chip = read_c0_prid() & 0xff00;
+	int chip = read_c0_prid() & PRID_IMP_MASK;
 
 	return chip == PRID_IMP_NETLOGIC_XLP2XX ||
-		chip == PRID_IMP_NETLOGIC_XLP9XX;
+		chip == PRID_IMP_NETLOGIC_XLP9XX ||
+		chip == PRID_IMP_NETLOGIC_XLP5XX;
 }
 
 static inline int cpu_is_xlp9xx(void)
 {
-	int chip = read_c0_prid() & 0xff00;
+	int chip = read_c0_prid() & PRID_IMP_MASK;
 
-	return chip == PRID_IMP_NETLOGIC_XLP9XX;
+	return chip == PRID_IMP_NETLOGIC_XLP9XX ||
+		chip == PRID_IMP_NETLOGIC_XLP5XX;
 }
 #endif /* !__ASSEMBLY__ */
 #endif /* _ASM_NLM_XLP_H */

arch/mips/include/asm/nile4.h

@@ -1,7 +1,7 @@
 /*
  *  asm-mips/nile4.h -- NEC Vrc-5074 Nile 4 definitions
  *
- *  Copyright (C) 2000 Geert Uytterhoeven <geert@sonycom.com>
+ *  Copyright (C) 2000 Geert Uytterhoeven <geert@linux-m68k.org>
  *		       Sony Software Development Center Europe (SDCE), Brussels
  *
  *  This file is based on the following documentation:

arch/mips/include/asm/octeon/octeon.h

@@ -211,7 +211,6 @@ union octeon_cvmemctl {
 
 extern void octeon_write_lcd(const char *s);
 extern void octeon_check_cpu_bist(void);
-extern int octeon_get_boot_debug_flag(void);
 extern int octeon_get_boot_uart(void);
 
 struct uart_port;

arch/mips/include/asm/pgtable.h

@@ -32,6 +32,8 @@ struct vm_area_struct;
 				 _page_cachable_default)
 #define PAGE_KERNEL	__pgprot(_PAGE_PRESENT | __READABLE | __WRITEABLE | \
 				 _PAGE_GLOBAL | _page_cachable_default)
+#define PAGE_KERNEL_NC	__pgprot(_PAGE_PRESENT | __READABLE | __WRITEABLE | \
+				 _PAGE_GLOBAL | _CACHE_CACHABLE_NONCOHERENT)
 #define PAGE_USERIO	__pgprot(_PAGE_PRESENT | (cpu_has_rixi ? 0 : _PAGE_READ) | _PAGE_WRITE | \
 				 _page_cachable_default)
 #define PAGE_KERNEL_UNCACHED __pgprot(_PAGE_PRESENT | __READABLE | \

arch/mips/include/asm/pm-cps.h

@@ -0,0 +1,51 @@
+/*
+ * Copyright (C) 2014 Imagination Technologies
+ * Author: Paul Burton <paul.burton@imgtec.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+#ifndef __MIPS_ASM_PM_CPS_H__
+#define __MIPS_ASM_PM_CPS_H__
+
+/*
+ * The CM & CPC can only handle coherence & power control on a per-core basis,
+ * thus in an MT system the VPEs within each core are coupled and can only
+ * enter or exit states requiring CM or CPC assistance in unison.
+ */
+#ifdef CONFIG_MIPS_MT
+# define coupled_coherence cpu_has_mipsmt
+#else
+# define coupled_coherence 0
+#endif
+
+/* Enumeration of possible PM states */
+enum cps_pm_state {
+	CPS_PM_NC_WAIT,		/* MIPS wait instruction, non-coherent */
+	CPS_PM_CLOCK_GATED,	/* Core clock gated */
+	CPS_PM_POWER_GATED,	/* Core power gated */
+	CPS_PM_STATE_COUNT,
+};
+
+/**
+ * cps_pm_support_state - determine whether the system supports a PM state
+ * @state: the state to test for support
+ *
+ * Returns true if the system supports the given state, otherwise false.
+ */
+extern bool cps_pm_support_state(enum cps_pm_state state);
+
+/**
+ * cps_pm_enter_state - enter a PM state
+ * @state: the state to enter
+ *
+ * Enter the given PM state. If coupled_coherence is non-zero then it is
+ * expected that this function be called at approximately the same time on
+ * each coupled CPU. Returns 0 on successful entry & exit, otherwise -errno.
+ */
+extern int cps_pm_enter_state(enum cps_pm_state state);
+
+#endif /* __MIPS_ASM_PM_CPS_H__ */

arch/mips/include/asm/pm.h

@@ -0,0 +1,159 @@
+/*
+ * Copyright (C) 2014 Imagination Technologies Ltd
+ *
+ * This program is free software; you can redistribute	it and/or modify it
+ * under  the terms of	the GNU General	 Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ *
+ * PM helper macros for CPU power off (e.g. Suspend-to-RAM).
+ */
+
+#ifndef __ASM_PM_H
+#define __ASM_PM_H
+
+#ifdef __ASSEMBLY__
+
+#include <asm/asm-offsets.h>
+#include <asm/asm.h>
+#include <asm/mipsregs.h>
+#include <asm/regdef.h>
+
+/* Save CPU state to stack for suspend to RAM */
+.macro SUSPEND_SAVE_REGS
+	subu	sp, PT_SIZE
+	/* Call preserved GPRs */
+	LONG_S	$16, PT_R16(sp)
+	LONG_S	$17, PT_R17(sp)
+	LONG_S	$18, PT_R18(sp)
+	LONG_S	$19, PT_R19(sp)
+	LONG_S	$20, PT_R20(sp)
+	LONG_S	$21, PT_R21(sp)
+	LONG_S	$22, PT_R22(sp)
+	LONG_S	$23, PT_R23(sp)
+	LONG_S	$28, PT_R28(sp)
+	LONG_S	$30, PT_R30(sp)
+	LONG_S	$31, PT_R31(sp)
+	/* A couple of CP0 registers with space in pt_regs */
+	mfc0	k0, CP0_STATUS
+	LONG_S	k0, PT_STATUS(sp)
+.endm
+
+/* Restore CPU state from stack after resume from RAM */
+.macro RESUME_RESTORE_REGS_RETURN
+	.set	push
+	.set	noreorder
+	/* A couple of CP0 registers with space in pt_regs */
+	LONG_L	k0, PT_STATUS(sp)
+	mtc0	k0, CP0_STATUS
+	/* Call preserved GPRs */
+	LONG_L	$16, PT_R16(sp)
+	LONG_L	$17, PT_R17(sp)
+	LONG_L	$18, PT_R18(sp)
+	LONG_L	$19, PT_R19(sp)
+	LONG_L	$20, PT_R20(sp)
+	LONG_L	$21, PT_R21(sp)
+	LONG_L	$22, PT_R22(sp)
+	LONG_L	$23, PT_R23(sp)
+	LONG_L	$28, PT_R28(sp)
+	LONG_L	$30, PT_R30(sp)
+	LONG_L	$31, PT_R31(sp)
+	/* Pop and return */
+	jr	ra
+	 addiu	sp, PT_SIZE
+	.set	pop
+.endm
+
+/* Get address of static suspend state into t1 */
+.macro LA_STATIC_SUSPEND
+	la	t1, mips_static_suspend_state
+.endm
+
+/* Save important CPU state for early restoration to global data */
+.macro SUSPEND_SAVE_STATIC
+#ifdef CONFIG_EVA
+	/*
+	 * Segment configuration is saved in global data where it can be easily
+	 * reloaded without depending on the segment configuration.
+	 */
+	mfc0	k0, CP0_PAGEMASK, 2	/* SegCtl0 */
+	LONG_S	k0, SSS_SEGCTL0(t1)
+	mfc0	k0, CP0_PAGEMASK, 3	/* SegCtl1 */
+	LONG_S	k0, SSS_SEGCTL1(t1)
+	mfc0	k0, CP0_PAGEMASK, 4	/* SegCtl2 */
+	LONG_S	k0, SSS_SEGCTL2(t1)
+#endif
+	/* save stack pointer (pointing to GPRs) */
+	LONG_S	sp, SSS_SP(t1)
+.endm
+
+/* Restore important CPU state early from global data */
+.macro RESUME_RESTORE_STATIC
+#ifdef CONFIG_EVA
+	/*
+	 * Segment configuration must be restored prior to any access to
+	 * allocated memory, as it may reside outside of the legacy kernel
+	 * segments.
+	 */
+	LONG_L	k0, SSS_SEGCTL0(t1)
+	mtc0	k0, CP0_PAGEMASK, 2	/* SegCtl0 */
+	LONG_L	k0, SSS_SEGCTL1(t1)
+	mtc0	k0, CP0_PAGEMASK, 3	/* SegCtl1 */
+	LONG_L	k0, SSS_SEGCTL2(t1)
+	mtc0	k0, CP0_PAGEMASK, 4	/* SegCtl2 */
+	tlbw_use_hazard
+#endif
+	/* restore stack pointer (pointing to GPRs) */
+	LONG_L	sp, SSS_SP(t1)
+.endm
+
+/* flush caches to make sure context has reached memory */
+.macro SUSPEND_CACHE_FLUSH
+	.extern	__wback_cache_all
+	.set	push
+	.set	noreorder
+	la	t1, __wback_cache_all
+	LONG_L	t0, 0(t1)
+	jalr	t0
+	 nop
+	.set	pop
+ .endm
+
+/* Save suspend state and flush data caches to RAM */
+.macro SUSPEND_SAVE
+	SUSPEND_SAVE_REGS
+	LA_STATIC_SUSPEND
+	SUSPEND_SAVE_STATIC
+	SUSPEND_CACHE_FLUSH
+.endm
+
+/* Restore saved state after resume from RAM and return */
+.macro RESUME_RESTORE_RETURN
+	LA_STATIC_SUSPEND
+	RESUME_RESTORE_STATIC
+	RESUME_RESTORE_REGS_RETURN
+.endm
+
+#else /* __ASSEMBLY__ */
+
+/**
+ * struct mips_static_suspend_state - Core saved CPU state across S2R.
+ * @segctl:	CP0 Segment control registers.
+ * @sp:		Stack frame where GP register context is saved.
+ *
+ * This structure contains minimal CPU state that must be saved in static kernel
+ * data in order to be able to restore the rest of the state. This includes
+ * segmentation configuration in the case of EVA being enabled, as they must be
+ * restored prior to any kmalloc'd memory being referenced (even the stack
+ * pointer).
+ */
+struct mips_static_suspend_state {
+#ifdef CONFIG_EVA
+	unsigned long segctl[3];
+#endif
+	unsigned long sp;
+};
+
+#endif /* !__ASSEMBLY__ */
+
+#endif /* __ASM_PM_HELPERS_H */

arch/mips/include/asm/ptrace.h

@@ -39,9 +39,6 @@ struct pt_regs {
 	unsigned long cp0_badvaddr;
 	unsigned long cp0_cause;
 	unsigned long cp0_epc;
-#ifdef CONFIG_MIPS_MT_SMTC
-	unsigned long cp0_tcstatus;
-#endif /* CONFIG_MIPS_MT_SMTC */
 #ifdef CONFIG_CPU_CAVIUM_OCTEON
 	unsigned long long mpl[3];	  /* MTM{0,1,2} */
 	unsigned long long mtp[3];	  /* MTP{0,1,2} */

arch/mips/include/asm/r4kcache.h

@@ -43,11 +43,10 @@
 	: "i" (op), "R" (*(unsigned char *)(addr)))
 
 #ifdef CONFIG_MIPS_MT
+
 /*
- * Temporary hacks for SMTC debug. Optionally force single-threaded
- * execution during I-cache flushes.
+ * Optionally force single-threaded execution during I-cache flushes.
  */
-
 #define PROTECT_CACHE_FLUSHES 1
 
 #ifdef PROTECT_CACHE_FLUSHES
@@ -524,6 +523,8 @@ __BUILD_BLAST_CACHE(s, scache, Index_Writeback_Inv_SD, Hit_Writeback_Inv_SD, 32,
 __BUILD_BLAST_CACHE(d, dcache, Index_Writeback_Inv_D, Hit_Writeback_Inv_D, 64, )
 __BUILD_BLAST_CACHE(i, icache, Index_Invalidate_I, Hit_Invalidate_I, 64, )
 __BUILD_BLAST_CACHE(s, scache, Index_Writeback_Inv_SD, Hit_Writeback_Inv_SD, 64, )
+__BUILD_BLAST_CACHE(d, dcache, Index_Writeback_Inv_D, Hit_Writeback_Inv_D, 128, )
+__BUILD_BLAST_CACHE(i, icache, Index_Invalidate_I, Hit_Invalidate_I, 128, )
 __BUILD_BLAST_CACHE(s, scache, Index_Writeback_Inv_SD, Hit_Writeback_Inv_SD, 128, )
 
 __BUILD_BLAST_CACHE(inv_d, dcache, Index_Writeback_Inv_D, Hit_Invalidate_D, 16, )

arch/mips/include/asm/sgi/ip22.h

@@ -69,6 +69,8 @@
 #define SGI_EISA_IRQ	SGINT_LOCAL2 + 3	/* EISA interrupts */
 #define SGI_KEYBD_IRQ	SGINT_LOCAL2 + 4	/* keyboard */
 #define SGI_SERIAL_IRQ	SGINT_LOCAL2 + 5	/* onboard serial */
+#define SGI_GIOEXP0_IRQ	(SGINT_LOCAL2 + 6)	/* Indy GIO EXP0 */
+#define SGI_GIOEXP1_IRQ	(SGINT_LOCAL2 + 7)	/* Indy GIO EXP1 */
 
 #define ip22_is_fullhouse()	(sgioc->sysid & SGIOC_SYSID_FULLHOUSE)
 

arch/mips/include/asm/smp-cps.h

@@ -13,17 +13,28 @@
 
 #ifndef __ASSEMBLY__
 
-struct boot_config {
-	unsigned int core;
-	unsigned int vpe;
+struct vpe_boot_config {
 	unsigned long pc;
 	unsigned long sp;
 	unsigned long gp;
 };
 
-extern struct boot_config mips_cps_bootcfg;
+struct core_boot_config {
+	atomic_t vpe_mask;
+	struct vpe_boot_config *vpe_config;
+};
+
+extern struct core_boot_config *mips_cps_core_bootcfg;
 
 extern void mips_cps_core_entry(void);
+extern void mips_cps_core_init(void);
+
+extern struct vpe_boot_config *mips_cps_boot_vpes(void);
+
+extern bool mips_cps_smp_in_use(void);
+
+extern void mips_cps_pm_save(void);
+extern void mips_cps_pm_restore(void);
 
 #else /* __ASSEMBLY__ */
 

arch/mips/include/asm/smp-ops.h

@@ -26,7 +26,6 @@ struct plat_smp_ops {
 	void (*send_ipi_mask)(const struct cpumask *mask, unsigned int action);
 	void (*init_secondary)(void);
 	void (*smp_finish)(void);
-	void (*cpus_done)(void);
 	void (*boot_secondary)(int cpu, struct task_struct *idle);
 	void (*smp_setup)(void);
 	void (*prepare_cpus)(unsigned int max_cpus);

arch/mips/include/asm/smp.h

@@ -46,6 +46,9 @@ extern int __cpu_logical_map[NR_CPUS];
 
 extern volatile cpumask_t cpu_callin_map;
 
+/* Mask of CPUs which are currently definitely operating coherently */
+extern cpumask_t cpu_coherent_mask;
+
 extern void asmlinkage smp_bootstrap(void);
 
 /*

arch/mips/include/asm/smtc.h

@@ -1,78 +0,0 @@
-#ifndef _ASM_SMTC_MT_H
-#define _ASM_SMTC_MT_H
-
-/*
- * Definitions for SMTC multitasking on MIPS MT cores
- */
-
-#include <asm/mips_mt.h>
-#include <asm/smtc_ipi.h>
-
-/*
- * System-wide SMTC status information
- */
-
-extern unsigned int smtc_status;
-
-#define SMTC_TLB_SHARED 0x00000001
-#define SMTC_MTC_ACTIVE 0x00000002
-
-/*
- * TLB/ASID Management information
- */
-
-#define MAX_SMTC_TLBS 2
-#define MAX_SMTC_ASIDS 256
-#if NR_CPUS <= 8
-typedef char asiduse;
-#else
-#if NR_CPUS <= 16
-typedef short asiduse;
-#else
-typedef long asiduse;
-#endif
-#endif
-
-/*
- * VPE Management information
- */
-
-#define MAX_SMTC_VPES	MAX_SMTC_TLBS	/* FIXME: May not always be true. */
-
-extern asiduse smtc_live_asid[MAX_SMTC_TLBS][MAX_SMTC_ASIDS];
-
-struct mm_struct;
-struct task_struct;
-
-void smtc_get_new_mmu_context(struct mm_struct *mm, unsigned long cpu);
-void self_ipi(struct smtc_ipi *);
-void smtc_flush_tlb_asid(unsigned long asid);
-extern int smtc_build_cpu_map(int startslot);
-extern void smtc_prepare_cpus(int cpus);
-extern void smtc_smp_finish(void);
-extern void smtc_boot_secondary(int cpu, struct task_struct *t);
-extern void smtc_cpus_done(void);
-extern void smtc_init_secondary(void);
-
-
-/*
- * Sharing the TLB between multiple VPEs means that the
- * "random" index selection function is not allowed to
- * select the current value of the Index register. To
- * avoid additional TLB pressure, the Index registers
- * are "parked" with an non-Valid value.
- */
-
-#define PARKED_INDEX	((unsigned int)0x80000000)
-
-/*
- * Define low-level interrupt mask for IPIs, if necessary.
- * By default, use SW interrupt 1, which requires no external
- * hardware support, but which works only for single-core
- * MIPS MT systems.
- */
-#ifndef MIPS_CPU_IPI_IRQ
-#define MIPS_CPU_IPI_IRQ 1
-#endif
-
-#endif /*  _ASM_SMTC_MT_H */

arch/mips/include/asm/smtc_ipi.h

@@ -1,129 +0,0 @@
-/*
- * Definitions used in MIPS MT SMTC "Interprocessor Interrupt" code.
- */
-#ifndef __ASM_SMTC_IPI_H
-#define __ASM_SMTC_IPI_H
-
-#include <linux/spinlock.h>
-
-//#define SMTC_IPI_DEBUG
-
-#ifdef SMTC_IPI_DEBUG
-#include <asm/mipsregs.h>
-#include <asm/mipsmtregs.h>
-#endif /* SMTC_IPI_DEBUG */
-
-/*
- * An IPI "message"
- */
-
-struct smtc_ipi {
-	struct smtc_ipi *flink;
-	int type;
-	void *arg;
-	int dest;
-#ifdef	SMTC_IPI_DEBUG
-	int sender;
-	long stamp;
-#endif /* SMTC_IPI_DEBUG */
-};
-
-/*
- * Defined IPI Types
- */
-
-#define LINUX_SMP_IPI 1
-#define SMTC_CLOCK_TICK 2
-#define IRQ_AFFINITY_IPI 3
-
-/*
- * A queue of IPI messages
- */
-
-struct smtc_ipi_q {
-	struct smtc_ipi *head;
-	spinlock_t lock;
-	struct smtc_ipi *tail;
-	int depth;
-	int resched_flag;	/* reschedule already queued */
-};
-
-static inline void smtc_ipi_nq(struct smtc_ipi_q *q, struct smtc_ipi *p)
-{
-	unsigned long flags;
-
-	spin_lock_irqsave(&q->lock, flags);
-	if (q->head == NULL)
-		q->head = q->tail = p;
-	else
-		q->tail->flink = p;
-	p->flink = NULL;
-	q->tail = p;
-	q->depth++;
-#ifdef	SMTC_IPI_DEBUG
-	p->sender = read_c0_tcbind();
-	p->stamp = read_c0_count();
-#endif /* SMTC_IPI_DEBUG */
-	spin_unlock_irqrestore(&q->lock, flags);
-}
-
-static inline struct smtc_ipi *__smtc_ipi_dq(struct smtc_ipi_q *q)
-{
-	struct smtc_ipi *p;
-
-	if (q->head == NULL)
-		p = NULL;
-	else {
-		p = q->head;
-		q->head = q->head->flink;
-		q->depth--;
-		/* Arguably unnecessary, but leaves queue cleaner */
-		if (q->head == NULL)
-			q->tail = NULL;
-	}
-
-	return p;
-}
-
-static inline struct smtc_ipi *smtc_ipi_dq(struct smtc_ipi_q *q)
-{
-	unsigned long flags;
-	struct smtc_ipi *p;
-
-	spin_lock_irqsave(&q->lock, flags);
-	p = __smtc_ipi_dq(q);
-	spin_unlock_irqrestore(&q->lock, flags);
-
-	return p;
-}
-
-static inline void smtc_ipi_req(struct smtc_ipi_q *q, struct smtc_ipi *p)
-{
-	unsigned long flags;
-
-	spin_lock_irqsave(&q->lock, flags);
-	if (q->head == NULL) {
-		q->head = q->tail = p;
-		p->flink = NULL;
-	} else {
-		p->flink = q->head;
-		q->head = p;
-	}
-	q->depth++;
-	spin_unlock_irqrestore(&q->lock, flags);
-}
-
-static inline int smtc_ipi_qdepth(struct smtc_ipi_q *q)
-{
-	unsigned long flags;
-	int retval;
-
-	spin_lock_irqsave(&q->lock, flags);
-	retval = q->depth;
-	spin_unlock_irqrestore(&q->lock, flags);
-	return retval;
-}
-
-extern void smtc_send_ipi(int cpu, int type, unsigned int action);
-
-#endif /* __ASM_SMTC_IPI_H */

arch/mips/include/asm/smtc_proc.h

@@ -1,23 +0,0 @@
-/*
- * Definitions for SMTC /proc entries
- * Copyright(C) 2005 MIPS Technologies Inc.
- */
-#ifndef __ASM_SMTC_PROC_H
-#define __ASM_SMTC_PROC_H
-
-/*
- * per-"CPU" statistics
- */
-
-struct smtc_cpu_proc {
-	unsigned long timerints;
-	unsigned long selfipis;
-};
-
-extern struct smtc_cpu_proc smtc_cpu_stats[NR_CPUS];
-
-/* Count of number of recoveries of "stolen" FPU access rights on 34K */
-
-extern atomic_t smtc_fpu_recoveries;
-
-#endif /* __ASM_SMTC_PROC_H */

arch/mips/include/asm/stackframe.h

@@ -19,22 +19,12 @@
 #include <asm/asm-offsets.h>
 #include <asm/thread_info.h>
 
-/*
- * For SMTC kernel, global IE should be left set, and interrupts
- * controlled exclusively via IXMT.
- */
-#ifdef CONFIG_MIPS_MT_SMTC
-#define STATMASK 0x1e
-#elif defined(CONFIG_CPU_R3000) || defined(CONFIG_CPU_TX39XX)
+#if defined(CONFIG_CPU_R3000) || defined(CONFIG_CPU_TX39XX)
 #define STATMASK 0x3f
 #else
 #define STATMASK 0x1f
 #endif
 
-#ifdef CONFIG_MIPS_MT_SMTC
-#include <asm/mipsmtregs.h>
-#endif /* CONFIG_MIPS_MT_SMTC */
-
 		.macro	SAVE_AT
 		.set	push
 		.set	noat
@@ -186,16 +176,6 @@
 		mfc0	v1, CP0_STATUS
 		LONG_S	$2, PT_R2(sp)
 		LONG_S	v1, PT_STATUS(sp)
-#ifdef CONFIG_MIPS_MT_SMTC
-		/*
-		 * Ideally, these instructions would be shuffled in
-		 * to cover the pipeline delay.
-		 */
-		.set	mips32
-		mfc0	k0, CP0_TCSTATUS
-		.set	mips0
-		LONG_S	k0, PT_TCSTATUS(sp)
-#endif /* CONFIG_MIPS_MT_SMTC */
 		LONG_S	$4, PT_R4(sp)
 		mfc0	v1, CP0_CAUSE
 		LONG_S	$5, PT_R5(sp)
@@ -321,36 +301,6 @@
 		.set	push
 		.set	reorder
 		.set	noat
-#ifdef CONFIG_MIPS_MT_SMTC
-		.set	mips32r2
-		/*
-		 * We need to make sure the read-modify-write
-		 * of Status below isn't perturbed by an interrupt
-		 * or cross-TC access, so we need to do at least a DMT,
-		 * protected by an interrupt-inhibit. But setting IXMT
-		 * also creates a few-cycle window where an IPI could
-		 * be queued and not be detected before potentially
-		 * returning to a WAIT or user-mode loop. It must be
-		 * replayed.
-		 *
-		 * We're in the middle of a context switch, and
-		 * we can't dispatch it directly without trashing
-		 * some registers, so we'll try to detect this unlikely
-		 * case and program a software interrupt in the VPE,
-		 * as would be done for a cross-VPE IPI.  To accommodate
-		 * the handling of that case, we're doing a DVPE instead
-		 * of just a DMT here to protect against other threads.
-		 * This is a lot of cruft to cover a tiny window.
-		 * If you can find a better design, implement it!
-		 *
-		 */
-		mfc0	v0, CP0_TCSTATUS
-		ori	v0, TCSTATUS_IXMT
-		mtc0	v0, CP0_TCSTATUS
-		_ehb
-		DVPE	5				# dvpe a1
-		jal	mips_ihb
-#endif /* CONFIG_MIPS_MT_SMTC */
 		mfc0	a0, CP0_STATUS
 		ori	a0, STATMASK
 		xori	a0, STATMASK
@@ -362,59 +312,6 @@
 		and	v0, v1
 		or	v0, a0
 		mtc0	v0, CP0_STATUS
-#ifdef CONFIG_MIPS_MT_SMTC
-/*
- * Only after EXL/ERL have been restored to status can we
- * restore TCStatus.IXMT.
- */
-		LONG_L	v1, PT_TCSTATUS(sp)
-		_ehb
-		mfc0	a0, CP0_TCSTATUS
-		andi	v1, TCSTATUS_IXMT
-		bnez	v1, 0f
-
-/*
- * We'd like to detect any IPIs queued in the tiny window
- * above and request an software interrupt to service them
- * when we ERET.
- *
- * Computing the offset into the IPIQ array of the executing
- * TC's IPI queue in-line would be tedious.  We use part of
- * the TCContext register to hold 16 bits of offset that we
- * can add in-line to find the queue head.
- */
-		mfc0	v0, CP0_TCCONTEXT
-		la	a2, IPIQ
-		srl	v0, v0, 16
-		addu	a2, a2, v0
-		LONG_L	v0, 0(a2)
-		beqz	v0, 0f
-/*
- * If we have a queue, provoke dispatch within the VPE by setting C_SW1
- */
-		mfc0	v0, CP0_CAUSE
-		ori	v0, v0, C_SW1
-		mtc0	v0, CP0_CAUSE
-0:
-		/*
-		 * This test should really never branch but
-		 * let's be prudent here.  Having atomized
-		 * the shared register modifications, we can
-		 * now EVPE, and must do so before interrupts
-		 * are potentially re-enabled.
-		 */
-		andi	a1, a1, MVPCONTROL_EVP
-		beqz	a1, 1f
-		evpe
-1:
-		/* We know that TCStatua.IXMT should be set from above */
-		xori	a0, a0, TCSTATUS_IXMT
-		or	a0, a0, v1
-		mtc0	a0, CP0_TCSTATUS
-		_ehb
-
-		.set	mips0
-#endif /* CONFIG_MIPS_MT_SMTC */
 		LONG_L	v1, PT_EPC(sp)
 		MTC0	v1, CP0_EPC
 		LONG_L	$31, PT_R31(sp)
@@ -467,33 +364,11 @@
  * Set cp0 enable bit as sign that we're running on the kernel stack
  */
 		.macro	CLI
-#if !defined(CONFIG_MIPS_MT_SMTC)
 		mfc0	t0, CP0_STATUS
 		li	t1, ST0_CU0 | STATMASK
 		or	t0, t1
 		xori	t0, STATMASK
 		mtc0	t0, CP0_STATUS
-#else /* CONFIG_MIPS_MT_SMTC */
-		/*
-		 * For SMTC, we need to set privilege
-		 * and disable interrupts only for the
-		 * current TC, using the TCStatus register.
-		 */
-		mfc0	t0, CP0_TCSTATUS
-		/* Fortunately CU 0 is in the same place in both registers */
-		/* Set TCU0, TMX, TKSU (for later inversion) and IXMT */
-		li	t1, ST0_CU0 | 0x08001c00
-		or	t0, t1
-		/* Clear TKSU, leave IXMT */
-		xori	t0, 0x00001800
-		mtc0	t0, CP0_TCSTATUS
-		_ehb
-		/* We need to leave the global IE bit set, but clear EXL...*/
-		mfc0	t0, CP0_STATUS
-		ori	t0, ST0_EXL | ST0_ERL
-		xori	t0, ST0_EXL | ST0_ERL
-		mtc0	t0, CP0_STATUS
-#endif /* CONFIG_MIPS_MT_SMTC */
 		irq_disable_hazard
 		.endm
 
@@ -502,35 +377,11 @@
  * Set cp0 enable bit as sign that we're running on the kernel stack
  */
 		.macro	STI
-#if !defined(CONFIG_MIPS_MT_SMTC)
 		mfc0	t0, CP0_STATUS
 		li	t1, ST0_CU0 | STATMASK
 		or	t0, t1
 		xori	t0, STATMASK & ~1
 		mtc0	t0, CP0_STATUS
-#else /* CONFIG_MIPS_MT_SMTC */
-		/*
-		 * For SMTC, we need to set privilege
-		 * and enable interrupts only for the
-		 * current TC, using the TCStatus register.
-		 */
-		_ehb
-		mfc0	t0, CP0_TCSTATUS
-		/* Fortunately CU 0 is in the same place in both registers */
-		/* Set TCU0, TKSU (for later inversion) and IXMT */
-		li	t1, ST0_CU0 | 0x08001c00
-		or	t0, t1
-		/* Clear TKSU *and* IXMT */
-		xori	t0, 0x00001c00
-		mtc0	t0, CP0_TCSTATUS
-		_ehb
-		/* We need to leave the global IE bit set, but clear EXL...*/
-		mfc0	t0, CP0_STATUS
-		ori	t0, ST0_EXL
-		xori	t0, ST0_EXL
-		mtc0	t0, CP0_STATUS
-		/* irq_enable_hazard below should expand to EHB for 24K/34K cpus */
-#endif /* CONFIG_MIPS_MT_SMTC */
 		irq_enable_hazard
 		.endm
 
@@ -540,32 +391,6 @@
  * Set cp0 enable bit as sign that we're running on the kernel stack
  */
 		.macro	KMODE
-#ifdef CONFIG_MIPS_MT_SMTC
-		/*
-		 * This gets baroque in SMTC.  We want to
-		 * protect the non-atomic clearing of EXL
-		 * with DMT/EMT, but we don't want to take
-		 * an interrupt while DMT is still in effect.
-		 */
-
-		/* KMODE gets invoked from both reorder and noreorder code */
-		.set	push
-		.set	mips32r2
-		.set	noreorder
-		mfc0	v0, CP0_TCSTATUS
-		andi	v1, v0, TCSTATUS_IXMT
-		ori	v0, TCSTATUS_IXMT
-		mtc0	v0, CP0_TCSTATUS
-		_ehb
-		DMT	2				# dmt	v0
-		/*
-		 * We don't know a priori if ra is "live"
-		 */
-		move	t0, ra
-		jal	mips_ihb
-		nop	/* delay slot */
-		move	ra, t0
-#endif /* CONFIG_MIPS_MT_SMTC */
 		mfc0	t0, CP0_STATUS
 		li	t1, ST0_CU0 | (STATMASK & ~1)
 #if defined(CONFIG_CPU_R3000) || defined(CONFIG_CPU_TX39XX)
@@ -576,25 +401,6 @@
 		or	t0, t1
 		xori	t0, STATMASK & ~1
 		mtc0	t0, CP0_STATUS
-#ifdef CONFIG_MIPS_MT_SMTC
-		_ehb
-		andi	v0, v0, VPECONTROL_TE
-		beqz	v0, 2f
-		nop	/* delay slot */
-		emt
-2:
-		mfc0	v0, CP0_TCSTATUS
-		/* Clear IXMT, then OR in previous value */
-		ori	v0, TCSTATUS_IXMT
-		xori	v0, TCSTATUS_IXMT
-		or	v0, v1, v0
-		mtc0	v0, CP0_TCSTATUS
-		/*
-		 * irq_disable_hazard below should expand to EHB
-		 * on 24K/34K CPUS
-		 */
-		.set pop
-#endif /* CONFIG_MIPS_MT_SMTC */
 		irq_disable_hazard
 		.endm
 

arch/mips/include/asm/thread_info.h

@@ -159,11 +159,7 @@ static inline struct thread_info *current_thread_info(void)
  * We stash processor id into a COP0 register to retrieve it fast
  * at kernel exception entry.
  */
-#if defined(CONFIG_MIPS_MT_SMTC)
-#define SMP_CPUID_REG		2, 2	/* TCBIND */
-#define ASM_SMP_CPUID_REG	$2, 2
-#define SMP_CPUID_PTRSHIFT	19
-#elif defined(CONFIG_MIPS_PGD_C0_CONTEXT)
+#if   defined(CONFIG_MIPS_PGD_C0_CONTEXT)
 #define SMP_CPUID_REG		20, 0	/* XCONTEXT */
 #define ASM_SMP_CPUID_REG	$20
 #define SMP_CPUID_PTRSHIFT	48
@@ -179,13 +175,8 @@ static inline struct thread_info *current_thread_info(void)
 #define SMP_CPUID_REGSHIFT	(SMP_CPUID_PTRSHIFT + 2)
 #endif
 
-#ifdef CONFIG_MIPS_MT_SMTC
-#define ASM_CPUID_MFC0		mfc0
-#define UASM_i_CPUID_MFC0	uasm_i_mfc0
-#else
 #define ASM_CPUID_MFC0		MFC0
 #define UASM_i_CPUID_MFC0	UASM_i_MFC0
-#endif
 
 #endif /* __KERNEL__ */
 #endif /* _ASM_THREAD_INFO_H */

arch/mips/include/asm/time.h

@@ -52,14 +52,11 @@ extern int (*perf_irq)(void);
  */
 extern unsigned int __weak get_c0_compare_int(void);
 extern int r4k_clockevent_init(void);
-extern int smtc_clockevent_init(void);
 extern int gic_clockevent_init(void);
 
 static inline int mips_clockevent_init(void)
 {
-#ifdef CONFIG_MIPS_MT_SMTC
-	return smtc_clockevent_init();
-#elif defined(CONFIG_CEVT_GIC)
+#if   defined(CONFIG_CEVT_GIC)
 	return (gic_clockevent_init() | r4k_clockevent_init());
 #elif defined(CONFIG_CEVT_R4K)
 	return r4k_clockevent_init();

arch/mips/include/asm/timex.h

@@ -4,12 +4,16 @@
  * for more details.
  *
  * Copyright (C) 1998, 1999, 2003 by Ralf Baechle
+ * Copyright (C) 2014 by Maciej W. Rozycki
  */
 #ifndef _ASM_TIMEX_H
 #define _ASM_TIMEX_H
 
 #ifdef __KERNEL__
 
+#include <linux/compiler.h>
+
+#include <asm/cpu.h>
 #include <asm/cpu-features.h>
 #include <asm/mipsregs.h>
 #include <asm/cpu-type.h>
@@ -45,29 +49,54 @@ typedef unsigned int cycles_t;
  * However for now the implementaton of this function doesn't get these
  * fine details right.
  */
-static inline cycles_t get_cycles(void)
+static inline int can_use_mips_counter(unsigned int prid)
 {
-	switch (boot_cpu_type()) {
-	case CPU_R4400PC:
-	case CPU_R4400SC:
-	case CPU_R4400MC:
-		if ((read_c0_prid() & 0xff) >= 0x0050)
-			return read_c0_count();
-		break;
+	int comp = (prid & PRID_COMP_MASK) != PRID_COMP_LEGACY;
 
-        case CPU_R4000PC:
-        case CPU_R4000SC:
-        case CPU_R4000MC:
-		break;
+	if (__builtin_constant_p(cpu_has_counter) && !cpu_has_counter)
+		return 0;
+	else if (__builtin_constant_p(cpu_has_mips_r) && cpu_has_mips_r)
+		return 1;
+	else if (likely(!__builtin_constant_p(cpu_has_mips_r) && comp))
+		return 1;
+	/* Make sure we don't peek at cpu_data[0].options in the fast path! */
+	if (!__builtin_constant_p(cpu_has_counter))
+		asm volatile("" : "=m" (cpu_data[0].options));
+	if (likely(cpu_has_counter &&
+		   prid >= (PRID_IMP_R4000 | PRID_REV_ENCODE_44(5, 0))))
+		return 1;
+	else
+		return 0;
+}
 
-	default:
-		if (cpu_has_counter)
-			return read_c0_count();
-		break;
-	}
+static inline cycles_t get_cycles(void)
+{
+	if (can_use_mips_counter(read_c0_prid()))
+		return read_c0_count();
+	else
+		return 0;	/* no usable counter */
+}
+
+/*
+ * Like get_cycles - but where c0_count is not available we desperately
+ * use c0_random in an attempt to get at least a little bit of entropy.
+ *
+ * R6000 and R6000A neither have a count register nor a random register.
+ * That leaves no entropy source in the CPU itself.
+ */
+static inline unsigned long random_get_entropy(void)
+{
+	unsigned int prid = read_c0_prid();
+	unsigned int imp = prid & PRID_IMP_MASK;
 
-	return 0;	/* no usable counter */
+	if (can_use_mips_counter(prid))
+		return read_c0_count();
+	else if (likely(imp != PRID_IMP_R6000 && imp != PRID_IMP_R6000A))
+		return read_c0_random();
+	else
+		return 0;	/* no usable register */
 }
+#define random_get_entropy random_get_entropy
 
 #endif /* __KERNEL__ */
 

arch/mips/include/asm/uasm.h

@@ -55,6 +55,9 @@ void ISAOPC(op)(u32 **buf, unsigned int a, unsigned int b, unsigned int c)
 #define Ip_u2u1u3(op)							\
 void ISAOPC(op)(u32 **buf, unsigned int a, unsigned int b, unsigned int c)
 
+#define Ip_u3u2u1(op)							\
+void ISAOPC(op)(u32 **buf, unsigned int a, unsigned int b, unsigned int c)
+
 #define Ip_u3u1u2(op)							\
 void ISAOPC(op)(u32 **buf, unsigned int a, unsigned int b, unsigned int c)
 
@@ -74,6 +77,9 @@ void ISAOPC(op)(u32 **buf, unsigned int a, unsigned int b, unsigned int c, \
 #define Ip_u1u2(op)							\
 void ISAOPC(op)(u32 **buf, unsigned int a, unsigned int b)
 
+#define Ip_u2u1(op)							\
+void ISAOPC(op)(u32 **buf, unsigned int a, unsigned int b)
+
 #define Ip_u1s2(op)							\
 void ISAOPC(op)(u32 **buf, unsigned int a, signed int b)
 
@@ -99,6 +105,7 @@ Ip_u2u1s3(_daddiu);
 Ip_u3u1u2(_daddu);
 Ip_u2u1msbu3(_dins);
 Ip_u2u1msbu3(_dinsm);
+Ip_u1u2(_divu);
 Ip_u1u2u3(_dmfc0);
 Ip_u1u2u3(_dmtc0);
 Ip_u2u1u3(_drotr);
@@ -114,16 +121,22 @@ Ip_u2u1msbu3(_ext);
 Ip_u2u1msbu3(_ins);
 Ip_u1(_j);
 Ip_u1(_jal);
+Ip_u2u1(_jalr);
 Ip_u1(_jr);
+Ip_u2s3u1(_lb);
 Ip_u2s3u1(_ld);
 Ip_u3u1u2(_ldx);
+Ip_u2s3u1(_lh);
 Ip_u2s3u1(_ll);
 Ip_u2s3u1(_lld);
 Ip_u1s2(_lui);
 Ip_u2s3u1(_lw);
 Ip_u3u1u2(_lwx);
 Ip_u1u2u3(_mfc0);
+Ip_u1(_mfhi);
+Ip_u1(_mflo);
 Ip_u1u2u3(_mtc0);
+Ip_u3u1u2(_mul);
 Ip_u3u1u2(_or);
 Ip_u2u1u3(_ori);
 Ip_u2s3u1(_pref);
@@ -133,17 +146,25 @@ Ip_u2s3u1(_sc);
 Ip_u2s3u1(_scd);
 Ip_u2s3u1(_sd);
 Ip_u2u1u3(_sll);
+Ip_u3u2u1(_sllv);
+Ip_u2u1s3(_sltiu);
+Ip_u3u1u2(_sltu);
 Ip_u2u1u3(_sra);
 Ip_u2u1u3(_srl);
+Ip_u3u2u1(_srlv);
 Ip_u3u1u2(_subu);
 Ip_u2s3u1(_sw);
+Ip_u1(_sync);
 Ip_u1(_syscall);
 Ip_0(_tlbp);
 Ip_0(_tlbr);
 Ip_0(_tlbwi);
 Ip_0(_tlbwr);
+Ip_u1(_wait);
+Ip_u2u1(_wsbh);
 Ip_u3u1u2(_xor);
 Ip_u2u1u3(_xori);
+Ip_u2u1(_yield);
 
 
 /* Handle labels. */
@@ -264,6 +285,8 @@ void uasm_il_bbit0(u32 **p, struct uasm_reloc **r, unsigned int reg,
 		   unsigned int bit, int lid);
 void uasm_il_bbit1(u32 **p, struct uasm_reloc **r, unsigned int reg,
 		   unsigned int bit, int lid);
+void uasm_il_beq(u32 **p, struct uasm_reloc **r, unsigned int r1,
+		 unsigned int r2, int lid);
 void uasm_il_beqz(u32 **p, struct uasm_reloc **r, unsigned int reg, int lid);
 void uasm_il_beqzl(u32 **p, struct uasm_reloc **r, unsigned int reg, int lid);
 void uasm_il_bgezl(u32 **p, struct uasm_reloc **r, unsigned int reg, int lid);

arch/mips/include/uapi/asm/Kbuild

@@ -4,6 +4,7 @@ include include/uapi/asm-generic/Kbuild.asm
 generic-y += auxvec.h
 generic-y += ipcbuf.h
 
+header-y += bitfield.h
 header-y += bitsperlong.h
 header-y += break.h
 header-y += byteorder.h

arch/mips/include/uapi/asm/bitfield.h

@@ -0,0 +1,29 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2014 by Ralf Baechle <ralf@linux-mips.org>
+ */
+#ifndef __UAPI_ASM_BITFIELD_H
+#define __UAPI_ASM_BITFIELD_H
+
+/*
+ *  * Damn ...  bitfields depend from byteorder :-(
+ *   */
+#ifdef __MIPSEB__
+#define __BITFIELD_FIELD(field, more)					\
+	field;								\
+	more
+
+#elif defined(__MIPSEL__)
+
+#define __BITFIELD_FIELD(field, more)					\
+	more								\
+	field;
+
+#else /* !defined (__MIPSEB__) && !defined (__MIPSEL__) */
+#error "MIPS but neither __MIPSEL__ nor __MIPSEB__?"
+#endif
+
+#endif /* __UAPI_ASM_BITFIELD_H */

arch/mips/include/uapi/asm/inst.h

@@ -13,6 +13,8 @@
 #ifndef _UAPI_ASM_INST_H
 #define _UAPI_ASM_INST_H
 
+#include <asm/bitfield.h>
+
 /*
  * Major opcodes; before MIPS IV cop1x was called cop3.
  */
@@ -74,16 +76,17 @@ enum spec2_op {
 enum spec3_op {
 	ext_op, dextm_op, dextu_op, dext_op,
 	ins_op, dinsm_op, dinsu_op, dins_op,
-	lx_op     = 0x0a, lwle_op   = 0x19,
-	lwre_op   = 0x1a, cachee_op = 0x1b,
-	sbe_op    = 0x1c, she_op    = 0x1d,
-	sce_op    = 0x1e, swe_op    = 0x1f,
-	bshfl_op  = 0x20, swle_op   = 0x21,
-	swre_op   = 0x22, prefe_op  = 0x23,
-	dbshfl_op = 0x24, lbue_op   = 0x28,
-	lhue_op   = 0x29, lbe_op    = 0x2c,
-	lhe_op    = 0x2d, lle_op    = 0x2e,
-	lwe_op    = 0x2f, rdhwr_op  = 0x3b
+	yield_op  = 0x09, lx_op     = 0x0a,
+	lwle_op   = 0x19, lwre_op   = 0x1a,
+	cachee_op = 0x1b, sbe_op    = 0x1c,
+	she_op    = 0x1d, sce_op    = 0x1e,
+	swe_op    = 0x1f, bshfl_op  = 0x20,
+	swle_op   = 0x21, swre_op   = 0x22,
+	prefe_op  = 0x23, dbshfl_op = 0x24,
+	lbue_op   = 0x28, lhue_op   = 0x29,
+	lbe_op    = 0x2c, lhe_op    = 0x2d,
+	lle_op    = 0x2e, lwe_op    = 0x2f,
+	rdhwr_op  = 0x3b
 };
 
 /*
@@ -125,7 +128,8 @@ enum bcop_op {
 enum cop0_coi_func {
 	tlbr_op	      = 0x01, tlbwi_op	    = 0x02,
 	tlbwr_op      = 0x06, tlbp_op	    = 0x08,
-	rfe_op	      = 0x10, eret_op	    = 0x18
+	rfe_op	      = 0x10, eret_op	    = 0x18,
+	wait_op       = 0x20,
 };
 
 /*
@@ -201,6 +205,16 @@ enum lx_func {
 	lbx_op	= 0x16,
 };
 
+/*
+ * BSHFL opcodes
+ */
+enum bshfl_func {
+	wsbh_op = 0x2,
+	dshd_op = 0x5,
+	seb_op  = 0x10,
+	seh_op  = 0x18,
+};
+
 /*
  * (microMIPS) Major opcodes.
  */
@@ -244,17 +258,22 @@ enum mm_32i_minor_op {
 enum mm_32a_minor_op {
 	mm_sll32_op = 0x000,
 	mm_ins_op = 0x00c,
+	mm_sllv32_op = 0x010,
 	mm_ext_op = 0x02c,
 	mm_pool32axf_op = 0x03c,
 	mm_srl32_op = 0x040,
 	mm_sra_op = 0x080,
+	mm_srlv32_op = 0x090,
 	mm_rotr_op = 0x0c0,
 	mm_lwxs_op = 0x118,
 	mm_addu32_op = 0x150,
 	mm_subu32_op = 0x1d0,
+	mm_wsbh_op = 0x1ec,
+	mm_mul_op = 0x210,
 	mm_and_op = 0x250,
 	mm_or32_op = 0x290,
 	mm_xor32_op = 0x310,
+	mm_sltu_op = 0x390,
 };
 
 /*
@@ -294,15 +313,20 @@ enum mm_32axf_minor_op {
 	mm_mfc0_op = 0x003,
 	mm_mtc0_op = 0x00b,
 	mm_tlbp_op = 0x00d,
+	mm_mfhi32_op = 0x035,
 	mm_jalr_op = 0x03c,
 	mm_tlbr_op = 0x04d,
+	mm_mflo32_op = 0x075,
 	mm_jalrhb_op = 0x07c,
 	mm_tlbwi_op = 0x08d,
 	mm_tlbwr_op = 0x0cd,
 	mm_jalrs_op = 0x13c,
 	mm_jalrshb_op = 0x17c,
+	mm_sync_op = 0x1ad,
 	mm_syscall_op = 0x22d,
+	mm_wait_op = 0x24d,
 	mm_eret_op = 0x3cd,
+	mm_divu_op = 0x5dc,
 };
 
 /*
@@ -480,24 +504,6 @@ enum MIPS6e_i8_func {
  */
 #define MM_NOP16	0x0c00
 
-/*
- * Damn ...  bitfields depend from byteorder :-(
- */
-#ifdef __MIPSEB__
-#define __BITFIELD_FIELD(field, more)					\
-	field;								\
-	more
-
-#elif defined(__MIPSEL__)
-
-#define __BITFIELD_FIELD(field, more)					\
-	more								\
-	field;
-
-#else /* !defined (__MIPSEB__) && !defined (__MIPSEL__) */
-#error "MIPS but neither __MIPSEL__ nor __MIPSEB__?"
-#endif
-
 struct j_format {
 	__BITFIELD_FIELD(unsigned int opcode : 6, /* Jump format */
 	__BITFIELD_FIELD(unsigned int target : 26,

arch/mips/include/uapi/asm/kvm_para.h

@@ -1 +1,5 @@
-#include <asm-generic/kvm_para.h>
+#ifndef _UAPI_ASM_MIPS_KVM_PARA_H
+#define _UAPI_ASM_MIPS_KVM_PARA_H
+
+
+#endif /* _UAPI_ASM_MIPS_KVM_PARA_H */

arch/mips/include/uapi/asm/types.h

@@ -14,9 +14,12 @@
 /*
  * We don't use int-l64.h for the kernel anymore but still use it for
  * userspace to avoid code changes.
+ *
+ * However, some user programs (e.g. perf) may not want this. They can
+ * flag __SANE_USERSPACE_TYPES__ to get int-ll64.h here.
  */
 #ifndef __KERNEL__
-# if _MIPS_SZLONG == 64
+# if _MIPS_SZLONG == 64 && !defined(__SANE_USERSPACE_TYPES__)
 #  include <asm-generic/int-l64.h>
 # else
 #  include <asm-generic/int-ll64.h>

arch/mips/kernel/Makefile

@@ -17,7 +17,6 @@ endif
 
 obj-$(CONFIG_CEVT_BCM1480)	+= cevt-bcm1480.o
 obj-$(CONFIG_CEVT_R4K)		+= cevt-r4k.o
-obj-$(CONFIG_MIPS_MT_SMTC)	+= cevt-smtc.o
 obj-$(CONFIG_CEVT_DS1287)	+= cevt-ds1287.o
 obj-$(CONFIG_CEVT_GIC)		+= cevt-gic.o
 obj-$(CONFIG_CEVT_GT641XX)	+= cevt-gt641xx.o
@@ -42,7 +41,7 @@ obj-$(CONFIG_CPU_R4K_FPU)	+= r4k_fpu.o r4k_switch.o
 obj-$(CONFIG_CPU_R3000)		+= r2300_fpu.o r2300_switch.o
 obj-$(CONFIG_CPU_R6000)		+= r6000_fpu.o r4k_switch.o
 obj-$(CONFIG_CPU_TX39XX)	+= r2300_fpu.o r2300_switch.o
-obj-$(CONFIG_CPU_CAVIUM_OCTEON) += octeon_switch.o
+obj-$(CONFIG_CPU_CAVIUM_OCTEON)	+= r4k_fpu.o octeon_switch.o
 
 obj-$(CONFIG_SMP)		+= smp.o
 obj-$(CONFIG_SMP_UP)		+= smp-up.o
@@ -50,7 +49,6 @@ obj-$(CONFIG_CPU_BMIPS)		+= smp-bmips.o bmips_vec.o
 
 obj-$(CONFIG_MIPS_MT)		+= mips-mt.o
 obj-$(CONFIG_MIPS_MT_FPAFF)	+= mips-mt-fpaff.o
-obj-$(CONFIG_MIPS_MT_SMTC)	+= smtc.o smtc-asm.o smtc-proc.o
 obj-$(CONFIG_MIPS_MT_SMP)	+= smp-mt.o
 obj-$(CONFIG_MIPS_CMP)		+= smp-cmp.o
 obj-$(CONFIG_MIPS_CPS)		+= smp-cps.o cps-vec.o
@@ -107,6 +105,9 @@ obj-$(CONFIG_JUMP_LABEL)	+= jump_label.o
 obj-$(CONFIG_MIPS_CM)		+= mips-cm.o
 obj-$(CONFIG_MIPS_CPC)		+= mips-cpc.o
 
+obj-$(CONFIG_CPU_PM)		+= pm.o
+obj-$(CONFIG_MIPS_CPS_PM)	+= pm-cps.o
+
 #
 # DSP ASE supported for MIPS32 or MIPS64 Release 2 cores only. It is not
 # safe to unconditionnaly use the assembler -mdsp / -mdspr2 switches

arch/mips/kernel/asm-offsets.c

@@ -14,6 +14,7 @@
 #include <linux/mm.h>
 #include <linux/kbuild.h>
 #include <linux/suspend.h>
+#include <asm/pm.h>
 #include <asm/ptrace.h>
 #include <asm/processor.h>
 #include <asm/smp-cps.h>
@@ -64,9 +65,6 @@ void output_ptreg_defines(void)
 	OFFSET(PT_BVADDR, pt_regs, cp0_badvaddr);
 	OFFSET(PT_STATUS, pt_regs, cp0_status);
 	OFFSET(PT_CAUSE, pt_regs, cp0_cause);
-#ifdef CONFIG_MIPS_MT_SMTC
-	OFFSET(PT_TCSTATUS, pt_regs, cp0_tcstatus);
-#endif /* CONFIG_MIPS_MT_SMTC */
 #ifdef CONFIG_CPU_CAVIUM_OCTEON
 	OFFSET(PT_MPL, pt_regs, mpl);
 	OFFSET(PT_MTP, pt_regs, mtp);
@@ -404,6 +402,20 @@ void output_pbe_defines(void)
 }
 #endif
 
+#ifdef CONFIG_CPU_PM
+void output_pm_defines(void)
+{
+	COMMENT(" PM offsets. ");
+#ifdef CONFIG_EVA
+	OFFSET(SSS_SEGCTL0,	mips_static_suspend_state, segctl[0]);
+	OFFSET(SSS_SEGCTL1,	mips_static_suspend_state, segctl[1]);
+	OFFSET(SSS_SEGCTL2,	mips_static_suspend_state, segctl[2]);
+#endif
+	OFFSET(SSS_SP,		mips_static_suspend_state, sp);
+	BLANK();
+}
+#endif
+
 void output_kvm_defines(void)
 {
 	COMMENT(" KVM/MIPS Specfic offsets. ");
@@ -472,10 +484,14 @@ void output_kvm_defines(void)
 void output_cps_defines(void)
 {
 	COMMENT(" MIPS CPS offsets. ");
-	OFFSET(BOOTCFG_CORE, boot_config, core);
-	OFFSET(BOOTCFG_VPE, boot_config, vpe);
-	OFFSET(BOOTCFG_PC, boot_config, pc);
-	OFFSET(BOOTCFG_SP, boot_config, sp);
-	OFFSET(BOOTCFG_GP, boot_config, gp);
+
+	OFFSET(COREBOOTCFG_VPEMASK, core_boot_config, vpe_mask);
+	OFFSET(COREBOOTCFG_VPECONFIG, core_boot_config, vpe_config);
+	DEFINE(COREBOOTCFG_SIZE, sizeof(struct core_boot_config));
+
+	OFFSET(VPEBOOTCFG_PC, vpe_boot_config, pc);
+	OFFSET(VPEBOOTCFG_SP, vpe_boot_config, sp);
+	OFFSET(VPEBOOTCFG_GP, vpe_boot_config, gp);
+	DEFINE(VPEBOOTCFG_SIZE, sizeof(struct vpe_boot_config));
 }
 #endif

arch/mips/kernel/branch.c

@@ -48,6 +48,202 @@ int __isa_exception_epc(struct pt_regs *regs)
 	return epc;
 }
 
+/* (microMIPS) Convert 16-bit register encoding to 32-bit register encoding. */
+static const unsigned int reg16to32map[8] = {16, 17, 2, 3, 4, 5, 6, 7};
+
+int __mm_isBranchInstr(struct pt_regs *regs, struct mm_decoded_insn dec_insn,
+		       unsigned long *contpc)
+{
+	union mips_instruction insn = (union mips_instruction)dec_insn.insn;
+	int bc_false = 0;
+	unsigned int fcr31;
+	unsigned int bit;
+
+	if (!cpu_has_mmips)
+		return 0;
+
+	switch (insn.mm_i_format.opcode) {
+	case mm_pool32a_op:
+		if ((insn.mm_i_format.simmediate & MM_POOL32A_MINOR_MASK) ==
+		    mm_pool32axf_op) {
+			switch (insn.mm_i_format.simmediate >>
+				MM_POOL32A_MINOR_SHIFT) {
+			case mm_jalr_op:
+			case mm_jalrhb_op:
+			case mm_jalrs_op:
+			case mm_jalrshb_op:
+				if (insn.mm_i_format.rt != 0)	/* Not mm_jr */
+					regs->regs[insn.mm_i_format.rt] =
+						regs->cp0_epc +
+						dec_insn.pc_inc +
+						dec_insn.next_pc_inc;
+				*contpc = regs->regs[insn.mm_i_format.rs];
+				return 1;
+			}
+		}
+		break;
+	case mm_pool32i_op:
+		switch (insn.mm_i_format.rt) {
+		case mm_bltzals_op:
+		case mm_bltzal_op:
+			regs->regs[31] = regs->cp0_epc +
+				dec_insn.pc_inc +
+				dec_insn.next_pc_inc;
+			/* Fall through */
+		case mm_bltz_op:
+			if ((long)regs->regs[insn.mm_i_format.rs] < 0)
+				*contpc = regs->cp0_epc +
+					dec_insn.pc_inc +
+					(insn.mm_i_format.simmediate << 1);
+			else
+				*contpc = regs->cp0_epc +
+					dec_insn.pc_inc +
+					dec_insn.next_pc_inc;
+			return 1;
+		case mm_bgezals_op:
+		case mm_bgezal_op:
+			regs->regs[31] = regs->cp0_epc +
+					dec_insn.pc_inc +
+					dec_insn.next_pc_inc;
+			/* Fall through */
+		case mm_bgez_op:
+			if ((long)regs->regs[insn.mm_i_format.rs] >= 0)
+				*contpc = regs->cp0_epc +
+					dec_insn.pc_inc +
+					(insn.mm_i_format.simmediate << 1);
+			else
+				*contpc = regs->cp0_epc +
+					dec_insn.pc_inc +
+					dec_insn.next_pc_inc;
+			return 1;
+		case mm_blez_op:
+			if ((long)regs->regs[insn.mm_i_format.rs] <= 0)
+				*contpc = regs->cp0_epc +
+					dec_insn.pc_inc +
+					(insn.mm_i_format.simmediate << 1);
+			else
+				*contpc = regs->cp0_epc +
+					dec_insn.pc_inc +
+					dec_insn.next_pc_inc;
+			return 1;
+		case mm_bgtz_op:
+			if ((long)regs->regs[insn.mm_i_format.rs] <= 0)
+				*contpc = regs->cp0_epc +
+					dec_insn.pc_inc +
+					(insn.mm_i_format.simmediate << 1);
+			else
+				*contpc = regs->cp0_epc +
+					dec_insn.pc_inc +
+					dec_insn.next_pc_inc;
+			return 1;
+		case mm_bc2f_op:
+		case mm_bc1f_op:
+			bc_false = 1;
+			/* Fall through */
+		case mm_bc2t_op:
+		case mm_bc1t_op:
+			preempt_disable();
+			if (is_fpu_owner())
+				asm volatile("cfc1\t%0,$31" : "=r" (fcr31));
+			else
+				fcr31 = current->thread.fpu.fcr31;
+			preempt_enable();
+
+			if (bc_false)
+				fcr31 = ~fcr31;
+
+			bit = (insn.mm_i_format.rs >> 2);
+			bit += (bit != 0);
+			bit += 23;
+			if (fcr31 & (1 << bit))
+				*contpc = regs->cp0_epc +
+					dec_insn.pc_inc +
+					(insn.mm_i_format.simmediate << 1);
+			else
+				*contpc = regs->cp0_epc +
+					dec_insn.pc_inc + dec_insn.next_pc_inc;
+			return 1;
+		}
+		break;
+	case mm_pool16c_op:
+		switch (insn.mm_i_format.rt) {
+		case mm_jalr16_op:
+		case mm_jalrs16_op:
+			regs->regs[31] = regs->cp0_epc +
+				dec_insn.pc_inc + dec_insn.next_pc_inc;
+			/* Fall through */
+		case mm_jr16_op:
+			*contpc = regs->regs[insn.mm_i_format.rs];
+			return 1;
+		}
+		break;
+	case mm_beqz16_op:
+		if ((long)regs->regs[reg16to32map[insn.mm_b1_format.rs]] == 0)
+			*contpc = regs->cp0_epc +
+				dec_insn.pc_inc +
+				(insn.mm_b1_format.simmediate << 1);
+		else
+			*contpc = regs->cp0_epc +
+				dec_insn.pc_inc + dec_insn.next_pc_inc;
+		return 1;
+	case mm_bnez16_op:
+		if ((long)regs->regs[reg16to32map[insn.mm_b1_format.rs]] != 0)
+			*contpc = regs->cp0_epc +
+				dec_insn.pc_inc +
+				(insn.mm_b1_format.simmediate << 1);
+		else
+			*contpc = regs->cp0_epc +
+				dec_insn.pc_inc + dec_insn.next_pc_inc;
+		return 1;
+	case mm_b16_op:
+		*contpc = regs->cp0_epc + dec_insn.pc_inc +
+			 (insn.mm_b0_format.simmediate << 1);
+		return 1;
+	case mm_beq32_op:
+		if (regs->regs[insn.mm_i_format.rs] ==
+		    regs->regs[insn.mm_i_format.rt])
+			*contpc = regs->cp0_epc +
+				dec_insn.pc_inc +
+				(insn.mm_i_format.simmediate << 1);
+		else
+			*contpc = regs->cp0_epc +
+				dec_insn.pc_inc +
+				dec_insn.next_pc_inc;
+		return 1;
+	case mm_bne32_op:
+		if (regs->regs[insn.mm_i_format.rs] !=
+		    regs->regs[insn.mm_i_format.rt])
+			*contpc = regs->cp0_epc +
+				dec_insn.pc_inc +
+				(insn.mm_i_format.simmediate << 1);
+		else
+			*contpc = regs->cp0_epc +
+				dec_insn.pc_inc + dec_insn.next_pc_inc;
+		return 1;
+	case mm_jalx32_op:
+		regs->regs[31] = regs->cp0_epc +
+			dec_insn.pc_inc + dec_insn.next_pc_inc;
+		*contpc = regs->cp0_epc + dec_insn.pc_inc;
+		*contpc >>= 28;
+		*contpc <<= 28;
+		*contpc |= (insn.j_format.target << 2);
+		return 1;
+	case mm_jals32_op:
+	case mm_jal32_op:
+		regs->regs[31] = regs->cp0_epc +
+			dec_insn.pc_inc + dec_insn.next_pc_inc;
+		/* Fall through */
+	case mm_j32_op:
+		*contpc = regs->cp0_epc + dec_insn.pc_inc;
+		*contpc >>= 27;
+		*contpc <<= 27;
+		*contpc |= (insn.j_format.target << 1);
+		set_isa16_mode(*contpc);
+		return 1;
+	}
+	return 0;
+}
+
 /*
  * Compute return address and emulate branch in microMIPS mode after an
  * exception only. It does not handle compact branches/jumps and cannot
@@ -366,7 +562,11 @@ int __compute_return_epc_for_insn(struct pt_regs *regs,
 	case cop1_op:
 		preempt_disable();
 		if (is_fpu_owner())
-			asm volatile("cfc1\t%0,$31" : "=r" (fcr31));
+			asm volatile(
+				".set push\n"
+				"\t.set mips1\n"
+				"\tcfc1\t%0,$31\n"
+				"\t.set pop" : "=r" (fcr31));
 		else
 			fcr31 = current->thread.fpu.fcr31;
 		preempt_enable();

arch/mips/kernel/cevt-gic.c

@@ -26,7 +26,7 @@ static int gic_next_event(unsigned long delta, struct clock_event_device *evt)
 
 	cnt = gic_read_count();
 	cnt += (u64)delta;
-	gic_write_compare(cnt);
+	gic_write_cpu_compare(cnt, cpumask_first(evt->cpumask));
 	res = ((int)(gic_read_count() - cnt) >= 0) ? -ETIME : 0;
 	return res;
 }
@@ -73,7 +73,8 @@ int gic_clockevent_init(void)
 	cd = &per_cpu(gic_clockevent_device, cpu);
 
 	cd->name		= "MIPS GIC";
-	cd->features		= CLOCK_EVT_FEAT_ONESHOT;
+	cd->features		= CLOCK_EVT_FEAT_ONESHOT |
+				  CLOCK_EVT_FEAT_C3STOP;
 
 	clockevent_set_clock(cd, gic_frequency);
 

arch/mips/kernel/cevt-r4k.c

@@ -12,17 +12,10 @@
 #include <linux/smp.h>
 #include <linux/irq.h>
 
-#include <asm/smtc_ipi.h>
 #include <asm/time.h>
 #include <asm/cevt-r4k.h>
 #include <asm/gic.h>
 
-/*
- * The SMTC Kernel for the 34K, 1004K, et. al. replaces several
- * of these routines with SMTC-specific variants.
- */
-
-#ifndef CONFIG_MIPS_MT_SMTC
 static int mips_next_event(unsigned long delta,
 			   struct clock_event_device *evt)
 {
@@ -36,8 +29,6 @@ static int mips_next_event(unsigned long delta,
 	return res;
 }
 
-#endif /* CONFIG_MIPS_MT_SMTC */
-
 void mips_set_clock_mode(enum clock_event_mode mode,
 				struct clock_event_device *evt)
 {
@@ -47,7 +38,6 @@ void mips_set_clock_mode(enum clock_event_mode mode,
 DEFINE_PER_CPU(struct clock_event_device, mips_clockevent_device);
 int cp0_timer_irq_installed;
 
-#ifndef CONFIG_MIPS_MT_SMTC
 irqreturn_t c0_compare_interrupt(int irq, void *dev_id)
 {
 	const int r2 = cpu_has_mips_r2;
@@ -72,9 +62,6 @@ irqreturn_t c0_compare_interrupt(int irq, void *dev_id)
 		/* Clear Count/Compare Interrupt */
 		write_c0_compare(read_c0_compare());
 		cd = &per_cpu(mips_clockevent_device, cpu);
-#ifdef CONFIG_CEVT_GIC
-		if (!gic_present)
-#endif
 		cd->event_handler(cd);
 	}
 
@@ -82,8 +69,6 @@ out:
 	return IRQ_HANDLED;
 }
 
-#endif /* Not CONFIG_MIPS_MT_SMTC */
-
 struct irqaction c0_compare_irqaction = {
 	.handler = c0_compare_interrupt,
 	.flags = IRQF_PERCPU | IRQF_TIMER,
@@ -170,7 +155,6 @@ int c0_compare_int_usable(void)
 	return 1;
 }
 
-#ifndef CONFIG_MIPS_MT_SMTC
 int r4k_clockevent_init(void)
 {
 	unsigned int cpu = smp_processor_id();
@@ -195,7 +179,9 @@ int r4k_clockevent_init(void)
 	cd = &per_cpu(mips_clockevent_device, cpu);
 
 	cd->name		= "MIPS";
-	cd->features		= CLOCK_EVT_FEAT_ONESHOT;
+	cd->features		= CLOCK_EVT_FEAT_ONESHOT |
+				  CLOCK_EVT_FEAT_C3STOP |
+				  CLOCK_EVT_FEAT_PERCPU;
 
 	clockevent_set_clock(cd, mips_hpt_frequency);
 
@@ -210,9 +196,6 @@ int r4k_clockevent_init(void)
 	cd->set_mode		= mips_set_clock_mode;
 	cd->event_handler	= mips_event_handler;
 
-#ifdef CONFIG_CEVT_GIC
-	if (!gic_present)
-#endif
 	clockevents_register_device(cd);
 
 	if (cp0_timer_irq_installed)
@@ -225,4 +208,3 @@ int r4k_clockevent_init(void)
 	return 0;
 }
 
-#endif /* Not CONFIG_MIPS_MT_SMTC */

arch/mips/kernel/cevt-smtc.c

@@ -1,324 +0,0 @@
-/*
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- * Copyright (C) 2007 MIPS Technologies, Inc.
- * Copyright (C) 2007 Ralf Baechle <ralf@linux-mips.org>
- * Copyright (C) 2008 Kevin D. Kissell, Paralogos sarl
- */
-#include <linux/clockchips.h>
-#include <linux/interrupt.h>
-#include <linux/percpu.h>
-#include <linux/smp.h>
-#include <linux/irq.h>
-
-#include <asm/smtc_ipi.h>
-#include <asm/time.h>
-#include <asm/cevt-r4k.h>
-
-/*
- * Variant clock event timer support for SMTC on MIPS 34K, 1004K
- * or other MIPS MT cores.
- *
- * Notes on SMTC Support:
- *
- * SMTC has multiple microthread TCs pretending to be Linux CPUs.
- * But there's only one Count/Compare pair per VPE, and Compare
- * interrupts are taken opportunisitically by available TCs
- * bound to the VPE with the Count register.  The new timer
- * framework provides for global broadcasts, but we really
- * want VPE-level multicasts for best behavior. So instead
- * of invoking the high-level clock-event broadcast code,
- * this version of SMTC support uses the historical SMTC
- * multicast mechanisms "under the hood", appearing to the
- * generic clock layer as if the interrupts are per-CPU.
- *
- * The approach taken here is to maintain a set of NR_CPUS
- * virtual timers, and track which "CPU" needs to be alerted
- * at each event.
- *
- * It's unlikely that we'll see a MIPS MT core with more than
- * 2 VPEs, but we *know* that we won't need to handle more
- * VPEs than we have "CPUs".  So NCPUs arrays of NCPUs elements
- * is always going to be overkill, but always going to be enough.
- */
-
-unsigned long smtc_nexttime[NR_CPUS][NR_CPUS];
-static int smtc_nextinvpe[NR_CPUS];
-
-/*
- * Timestamps stored are absolute values to be programmed
- * into Count register.	 Valid timestamps will never be zero.
- * If a Zero Count value is actually calculated, it is converted
- * to be a 1, which will introduce 1 or two CPU cycles of error
- * roughly once every four billion events, which at 1000 HZ means
- * about once every 50 days.  If that's actually a problem, one
- * could alternate squashing 0 to 1 and to -1.
- */
-
-#define MAKEVALID(x) (((x) == 0L) ? 1L : (x))
-#define ISVALID(x) ((x) != 0L)
-
-/*
- * Time comparison is subtle, as it's really truncated
- * modular arithmetic.
- */
-
-#define IS_SOONER(a, b, reference) \
-    (((a) - (unsigned long)(reference)) < ((b) - (unsigned long)(reference)))
-
-/*
- * CATCHUP_INCREMENT, used when the function falls behind the counter.
- * Could be an increasing function instead of a constant;
- */
-
-#define CATCHUP_INCREMENT 64
-
-static int mips_next_event(unsigned long delta,
-				struct clock_event_device *evt)
-{
-	unsigned long flags;
-	unsigned int mtflags;
-	unsigned long timestamp, reference, previous;
-	unsigned long nextcomp = 0L;
-	int vpe = current_cpu_data.vpe_id;
-	int cpu = smp_processor_id();
-	local_irq_save(flags);
-	mtflags = dmt();
-
-	/*
-	 * Maintain the per-TC virtual timer
-	 * and program the per-VPE shared Count register
-	 * as appropriate here...
-	 */
-	reference = (unsigned long)read_c0_count();
-	timestamp = MAKEVALID(reference + delta);
-	/*
-	 * To really model the clock, we have to catch the case
-	 * where the current next-in-VPE timestamp is the old
-	 * timestamp for the calling CPE, but the new value is
-	 * in fact later.  In that case, we have to do a full
-	 * scan and discover the new next-in-VPE CPU id and
-	 * timestamp.
-	 */
-	previous = smtc_nexttime[vpe][cpu];
-	if (cpu == smtc_nextinvpe[vpe] && ISVALID(previous)
-	    && IS_SOONER(previous, timestamp, reference)) {
-		int i;
-		int soonest = cpu;
-
-		/*
-		 * Update timestamp array here, so that new
-		 * value gets considered along with those of
-		 * other virtual CPUs on the VPE.
-		 */
-		smtc_nexttime[vpe][cpu] = timestamp;
-		for_each_online_cpu(i) {
-			if (ISVALID(smtc_nexttime[vpe][i])
-			    && IS_SOONER(smtc_nexttime[vpe][i],
-				smtc_nexttime[vpe][soonest], reference)) {
-				    soonest = i;
-			}
-		}
-		smtc_nextinvpe[vpe] = soonest;
-		nextcomp = smtc_nexttime[vpe][soonest];
-	/*
-	 * Otherwise, we don't have to process the whole array rank,
-	 * we just have to see if the event horizon has gotten closer.
-	 */
-	} else {
-		if (!ISVALID(smtc_nexttime[vpe][smtc_nextinvpe[vpe]]) ||
-		    IS_SOONER(timestamp,
-			smtc_nexttime[vpe][smtc_nextinvpe[vpe]], reference)) {
-			    smtc_nextinvpe[vpe] = cpu;
-			    nextcomp = timestamp;
-		}
-		/*
-		 * Since next-in-VPE may me the same as the executing
-		 * virtual CPU, we update the array *after* checking
-		 * its value.
-		 */
-		smtc_nexttime[vpe][cpu] = timestamp;
-	}
-
-	/*
-	 * It may be that, in fact, we don't need to update Compare,
-	 * but if we do, we want to make sure we didn't fall into
-	 * a crack just behind Count.
-	 */
-	if (ISVALID(nextcomp)) {
-		write_c0_compare(nextcomp);
-		ehb();
-		/*
-		 * We never return an error, we just make sure
-		 * that we trigger the handlers as quickly as
-		 * we can if we fell behind.
-		 */
-		while ((nextcomp - (unsigned long)read_c0_count())
-			> (unsigned long)LONG_MAX) {
-			nextcomp += CATCHUP_INCREMENT;
-			write_c0_compare(nextcomp);
-			ehb();
-		}
-	}
-	emt(mtflags);
-	local_irq_restore(flags);
-	return 0;
-}
-
-
-void smtc_distribute_timer(int vpe)
-{
-	unsigned long flags;
-	unsigned int mtflags;
-	int cpu;
-	struct clock_event_device *cd;
-	unsigned long nextstamp;
-	unsigned long reference;
-
-
-repeat:
-	nextstamp = 0L;
-	for_each_online_cpu(cpu) {
-	    /*
-	     * Find virtual CPUs within the current VPE who have
-	     * unserviced timer requests whose time is now past.
-	     */
-	    local_irq_save(flags);
-	    mtflags = dmt();
-	    if (cpu_data[cpu].vpe_id == vpe &&
-		ISVALID(smtc_nexttime[vpe][cpu])) {
-		reference = (unsigned long)read_c0_count();
-		if ((smtc_nexttime[vpe][cpu] - reference)
-			 > (unsigned long)LONG_MAX) {
-			    smtc_nexttime[vpe][cpu] = 0L;
-			    emt(mtflags);
-			    local_irq_restore(flags);
-			    /*
-			     * We don't send IPIs to ourself.
-			     */
-			    if (cpu != smp_processor_id()) {
-				smtc_send_ipi(cpu, SMTC_CLOCK_TICK, 0);
-			    } else {
-				cd = &per_cpu(mips_clockevent_device, cpu);
-				cd->event_handler(cd);
-			    }
-		} else {
-			/* Local to VPE but Valid Time not yet reached. */
-			if (!ISVALID(nextstamp) ||
-			    IS_SOONER(smtc_nexttime[vpe][cpu], nextstamp,
-			    reference)) {
-				smtc_nextinvpe[vpe] = cpu;
-				nextstamp = smtc_nexttime[vpe][cpu];
-			}
-			emt(mtflags);
-			local_irq_restore(flags);
-		}
-	    } else {
-		emt(mtflags);
-		local_irq_restore(flags);
-
-	    }
-	}
-	/* Reprogram for interrupt at next soonest timestamp for VPE */
-	if (ISVALID(nextstamp)) {
-		write_c0_compare(nextstamp);
-		ehb();
-		if ((nextstamp - (unsigned long)read_c0_count())
-			> (unsigned long)LONG_MAX)
-				goto repeat;
-	}
-}
-
-
-irqreturn_t c0_compare_interrupt(int irq, void *dev_id)
-{
-	int cpu = smp_processor_id();
-
-	/* If we're running SMTC, we've got MIPS MT and therefore MIPS32R2 */
-	handle_perf_irq(1);
-
-	if (read_c0_cause() & (1 << 30)) {
-		/* Clear Count/Compare Interrupt */
-		write_c0_compare(read_c0_compare());
-		smtc_distribute_timer(cpu_data[cpu].vpe_id);
-	}
-	return IRQ_HANDLED;
-}
-
-
-int smtc_clockevent_init(void)
-{
-	uint64_t mips_freq = mips_hpt_frequency;
-	unsigned int cpu = smp_processor_id();
-	struct clock_event_device *cd;
-	unsigned int irq;
-	int i;
-	int j;
-
-	if (!cpu_has_counter || !mips_hpt_frequency)
-		return -ENXIO;
-	if (cpu == 0) {
-		for (i = 0; i < num_possible_cpus(); i++) {
-			smtc_nextinvpe[i] = 0;
-			for (j = 0; j < num_possible_cpus(); j++)
-				smtc_nexttime[i][j] = 0L;
-		}
-		/*
-		 * SMTC also can't have the usablility test
-		 * run by secondary TCs once Compare is in use.
-		 */
-		if (!c0_compare_int_usable())
-			return -ENXIO;
-	}
-
-	/*
-	 * With vectored interrupts things are getting platform specific.
-	 * get_c0_compare_int is a hook to allow a platform to return the
-	 * interrupt number of it's liking.
-	 */
-	irq = MIPS_CPU_IRQ_BASE + cp0_compare_irq;
-	if (get_c0_compare_int)
-		irq = get_c0_compare_int();
-
-	cd = &per_cpu(mips_clockevent_device, cpu);
-
-	cd->name		= "MIPS";
-	cd->features		= CLOCK_EVT_FEAT_ONESHOT;
-
-	/* Calculate the min / max delta */
-	cd->mult	= div_sc((unsigned long) mips_freq, NSEC_PER_SEC, 32);
-	cd->shift		= 32;
-	cd->max_delta_ns	= clockevent_delta2ns(0x7fffffff, cd);
-	cd->min_delta_ns	= clockevent_delta2ns(0x300, cd);
-
-	cd->rating		= 300;
-	cd->irq			= irq;
-	cd->cpumask		= cpumask_of(cpu);
-	cd->set_next_event	= mips_next_event;
-	cd->set_mode		= mips_set_clock_mode;
-	cd->event_handler	= mips_event_handler;
-
-	clockevents_register_device(cd);
-
-	/*
-	 * On SMTC we only want to do the data structure
-	 * initialization and IRQ setup once.
-	 */
-	if (cpu)
-		return 0;
-	/*
-	 * And we need the hwmask associated with the c0_compare
-	 * vector to be initialized.
-	 */
-	irq_hwmask[irq] = (0x100 << cp0_compare_irq);
-	if (cp0_timer_irq_installed)
-		return 0;
-
-	cp0_timer_irq_installed = 1;
-
-	setup_irq(irq, &c0_compare_irqaction);
-
-	return 0;
-}

arch/mips/kernel/cps-vec.S

@@ -14,19 +14,43 @@
 #include <asm/asmmacro.h>
 #include <asm/cacheops.h>
 #include <asm/mipsregs.h>
+#include <asm/mipsmtregs.h>
+#include <asm/pm.h>
 
-#define GCR_CL_COHERENCE_OFS 0x2008
+#define GCR_CL_COHERENCE_OFS	0x2008
+#define GCR_CL_ID_OFS		0x2028
+
+.extern mips_cm_base
+
+.set noreorder
+
+	/*
+	 * Set dest to non-zero if the core supports the MT ASE, else zero. If
+	 * MT is not supported then branch to nomt.
+	 */
+	.macro	has_mt	dest, nomt
+	mfc0	\dest, CP0_CONFIG
+	bgez	\dest, \nomt
+	 mfc0	\dest, CP0_CONFIG, 1
+	bgez	\dest, \nomt
+	 mfc0	\dest, CP0_CONFIG, 2
+	bgez	\dest, \nomt
+	 mfc0	\dest, CP0_CONFIG, 3
+	andi	\dest, \dest, MIPS_CONF3_MT
+	beqz	\dest, \nomt
+	.endm
 
 .section .text.cps-vec
 .balign 0x1000
-.set noreorder
 
 LEAF(mips_cps_core_entry)
 	/*
-	 * These first 8 bytes will be patched by cps_smp_setup to load the
-	 * base address of the CM GCRs into register v1.
+	 * These first 12 bytes will be patched by cps_smp_setup to load the
+	 * base address of the CM GCRs into register v1 and the CCA to use into
+	 * register s0.
 	 */
 	.quad	0
+	.word	0
 
 	/* Check whether we're here due to an NMI */
 	mfc0	k0, CP0_STATUS
@@ -117,10 +141,11 @@ icache_done:
 	 add	a0, a0, t0
 dcache_done:
 
-	/* Set Kseg0 cacheable, coherent, write-back, write-allocate */
+	/* Set Kseg0 CCA to that in s0 */
 	mfc0	t0, CP0_CONFIG
 	ori	t0, 0x7
-	xori	t0, 0x2
+	xori	t0, 0x7
+	or	t0, t0, s0
 	mtc0	t0, CP0_CONFIG
 	ehb
 
@@ -134,21 +159,24 @@ dcache_done:
 	jr	t0
 	 nop
 
-1:	/* We're up, cached & coherent */
+	/*
+	 * We're up, cached & coherent. Perform any further required core-level
+	 * initialisation.
+	 */
+1:	jal	mips_cps_core_init
+	 nop
 
 	/*
-	 * TODO: We should check the VPE number we intended to boot here, and
-	 *       if non-zero we should start that VPE and stop this one. For
-	 *       the moment this doesn't matter since CPUs are brought up
-	 *       sequentially and in order, but once hotplug is implemented
-	 *       this will need revisiting.
+	 * Boot any other VPEs within this core that should be online, and
+	 * deactivate this VPE if it should be offline.
 	 */
+	jal	mips_cps_boot_vpes
+	 nop
 
 	/* Off we go! */
-	la	t0, mips_cps_bootcfg
-	lw	t1, BOOTCFG_PC(t0)
-	lw	gp, BOOTCFG_GP(t0)
-	lw	sp, BOOTCFG_SP(t0)
+	lw	t1, VPEBOOTCFG_PC(v0)
+	lw	gp, VPEBOOTCFG_GP(v0)
+	lw	sp, VPEBOOTCFG_SP(v0)
 	jr	t1
 	 nop
 	END(mips_cps_core_entry)
@@ -189,3 +217,271 @@ LEAF(excep_ejtag)
 	jr	k0
 	 nop
 	END(excep_ejtag)
+
+LEAF(mips_cps_core_init)
+#ifdef CONFIG_MIPS_MT
+	/* Check that the core implements the MT ASE */
+	has_mt	t0, 3f
+	 nop
+
+	.set	push
+	.set	mt
+
+	/* Only allow 1 TC per VPE to execute... */
+	dmt
+
+	/* ...and for the moment only 1 VPE */
+	dvpe
+	la	t1, 1f
+	jr.hb	t1
+	 nop
+
+	/* Enter VPE configuration state */
+1:	mfc0	t0, CP0_MVPCONTROL
+	ori	t0, t0, MVPCONTROL_VPC
+	mtc0	t0, CP0_MVPCONTROL
+
+	/* Retrieve the number of VPEs within the core */
+	mfc0	t0, CP0_MVPCONF0
+	srl	t0, t0, MVPCONF0_PVPE_SHIFT
+	andi	t0, t0, (MVPCONF0_PVPE >> MVPCONF0_PVPE_SHIFT)
+	addi	t7, t0, 1
+
+	/* If there's only 1, we're done */
+	beqz	t0, 2f
+	 nop
+
+	/* Loop through each VPE within this core */
+	li	t5, 1
+
+1:	/* Operate on the appropriate TC */
+	mtc0	t5, CP0_VPECONTROL
+	ehb
+
+	/* Bind TC to VPE (1:1 TC:VPE mapping) */
+	mttc0	t5, CP0_TCBIND
+
+	/* Set exclusive TC, non-active, master */
+	li	t0, VPECONF0_MVP
+	sll	t1, t5, VPECONF0_XTC_SHIFT
+	or	t0, t0, t1
+	mttc0	t0, CP0_VPECONF0
+
+	/* Set TC non-active, non-allocatable */
+	mttc0	zero, CP0_TCSTATUS
+
+	/* Set TC halted */
+	li	t0, TCHALT_H
+	mttc0	t0, CP0_TCHALT
+
+	/* Next VPE */
+	addi	t5, t5, 1
+	slt	t0, t5, t7
+	bnez	t0, 1b
+	 nop
+
+	/* Leave VPE configuration state */
+2:	mfc0	t0, CP0_MVPCONTROL
+	xori	t0, t0, MVPCONTROL_VPC
+	mtc0	t0, CP0_MVPCONTROL
+
+3:	.set	pop
+#endif
+	jr	ra
+	 nop
+	END(mips_cps_core_init)
+
+LEAF(mips_cps_boot_vpes)
+	/* Retrieve CM base address */
+	la	t0, mips_cm_base
+	lw	t0, 0(t0)
+
+	/* Calculate a pointer to this cores struct core_boot_config */
+	lw	t0, GCR_CL_ID_OFS(t0)
+	li	t1, COREBOOTCFG_SIZE
+	mul	t0, t0, t1
+	la	t1, mips_cps_core_bootcfg
+	lw	t1, 0(t1)
+	addu	t0, t0, t1
+
+	/* Calculate this VPEs ID. If the core doesn't support MT use 0 */
+	has_mt	t6, 1f
+	 li	t9, 0
+
+	/* Find the number of VPEs present in the core */
+	mfc0	t1, CP0_MVPCONF0
+	srl	t1, t1, MVPCONF0_PVPE_SHIFT
+	andi	t1, t1, MVPCONF0_PVPE >> MVPCONF0_PVPE_SHIFT
+	addi	t1, t1, 1
+
+	/* Calculate a mask for the VPE ID from EBase.CPUNum */
+	clz	t1, t1
+	li	t2, 31
+	subu	t1, t2, t1
+	li	t2, 1
+	sll	t1, t2, t1
+	addiu	t1, t1, -1
+
+	/* Retrieve the VPE ID from EBase.CPUNum */
+	mfc0	t9, $15, 1
+	and	t9, t9, t1
+
+1:	/* Calculate a pointer to this VPEs struct vpe_boot_config */
+	li	t1, VPEBOOTCFG_SIZE
+	mul	v0, t9, t1
+	lw	t7, COREBOOTCFG_VPECONFIG(t0)
+	addu	v0, v0, t7
+
+#ifdef CONFIG_MIPS_MT
+
+	/* If the core doesn't support MT then return */
+	bnez	t6, 1f
+	 nop
+	jr	ra
+	 nop
+
+	.set	push
+	.set	mt
+
+1:	/* Enter VPE configuration state */
+	dvpe
+	la	t1, 1f
+	jr.hb	t1
+	 nop
+1:	mfc0	t1, CP0_MVPCONTROL
+	ori	t1, t1, MVPCONTROL_VPC
+	mtc0	t1, CP0_MVPCONTROL
+	ehb
+
+	/* Loop through each VPE */
+	lw	t6, COREBOOTCFG_VPEMASK(t0)
+	move	t8, t6
+	li	t5, 0
+
+	/* Check whether the VPE should be running. If not, skip it */
+1:	andi	t0, t6, 1
+	beqz	t0, 2f
+	 nop
+
+	/* Operate on the appropriate TC */
+	mfc0	t0, CP0_VPECONTROL
+	ori	t0, t0, VPECONTROL_TARGTC
+	xori	t0, t0, VPECONTROL_TARGTC
+	or	t0, t0, t5
+	mtc0	t0, CP0_VPECONTROL
+	ehb
+
+	/* Skip the VPE if its TC is not halted */
+	mftc0	t0, CP0_TCHALT
+	beqz	t0, 2f
+	 nop
+
+	/* Calculate a pointer to the VPEs struct vpe_boot_config */
+	li	t0, VPEBOOTCFG_SIZE
+	mul	t0, t0, t5
+	addu	t0, t0, t7
+
+	/* Set the TC restart PC */
+	lw	t1, VPEBOOTCFG_PC(t0)
+	mttc0	t1, CP0_TCRESTART
+
+	/* Set the TC stack pointer */
+	lw	t1, VPEBOOTCFG_SP(t0)
+	mttgpr	t1, sp
+
+	/* Set the TC global pointer */
+	lw	t1, VPEBOOTCFG_GP(t0)
+	mttgpr	t1, gp
+
+	/* Copy config from this VPE */
+	mfc0	t0, CP0_CONFIG
+	mttc0	t0, CP0_CONFIG
+
+	/* Ensure no software interrupts are pending */
+	mttc0	zero, CP0_CAUSE
+	mttc0	zero, CP0_STATUS
+
+	/* Set TC active, not interrupt exempt */
+	mftc0	t0, CP0_TCSTATUS
+	li	t1, ~TCSTATUS_IXMT
+	and	t0, t0, t1
+	ori	t0, t0, TCSTATUS_A
+	mttc0	t0, CP0_TCSTATUS
+
+	/* Clear the TC halt bit */
+	mttc0	zero, CP0_TCHALT
+
+	/* Set VPE active */
+	mftc0	t0, CP0_VPECONF0
+	ori	t0, t0, VPECONF0_VPA
+	mttc0	t0, CP0_VPECONF0
+
+	/* Next VPE */
+2:	srl	t6, t6, 1
+	addi	t5, t5, 1
+	bnez	t6, 1b
+	 nop
+
+	/* Leave VPE configuration state */
+	mfc0	t1, CP0_MVPCONTROL
+	xori	t1, t1, MVPCONTROL_VPC
+	mtc0	t1, CP0_MVPCONTROL
+	ehb
+	evpe
+
+	/* Check whether this VPE is meant to be running */
+	li	t0, 1
+	sll	t0, t0, t9
+	and	t0, t0, t8
+	bnez	t0, 2f
+	 nop
+
+	/* This VPE should be offline, halt the TC */
+	li	t0, TCHALT_H
+	mtc0	t0, CP0_TCHALT
+	la	t0, 1f
+1:	jr.hb	t0
+	 nop
+
+2:	.set	pop
+
+#endif /* CONFIG_MIPS_MT */
+
+	/* Return */
+	jr	ra
+	 nop
+	END(mips_cps_boot_vpes)
+
+#if defined(CONFIG_MIPS_CPS_PM) && defined(CONFIG_CPU_PM)
+
+	/* Calculate a pointer to this CPUs struct mips_static_suspend_state */
+	.macro	psstate	dest
+	.set	push
+	.set	noat
+	lw	$1, TI_CPU(gp)
+	sll	$1, $1, LONGLOG
+	la	\dest, __per_cpu_offset
+	addu	$1, $1, \dest
+	lw	$1, 0($1)
+	la	\dest, cps_cpu_state
+	addu	\dest, \dest, $1
+	.set	pop
+	.endm
+
+LEAF(mips_cps_pm_save)
+	/* Save CPU state */
+	SUSPEND_SAVE_REGS
+	psstate	t1
+	SUSPEND_SAVE_STATIC
+	jr	v0
+	 nop
+	END(mips_cps_pm_save)
+
+LEAF(mips_cps_pm_restore)
+	/* Restore CPU state */
+	psstate	t1
+	RESUME_RESTORE_STATIC
+	RESUME_RESTORE_REGS_RETURN
+	END(mips_cps_pm_restore)
+
+#endif /* CONFIG_MIPS_CPS_PM && CONFIG_CPU_PM */