Merge branch 'board' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/renesas into next/boards

* 'board' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/renesas:
  ARM: mach-shmobile: bonito: make sure static function
  ARM: mach-shmobile: sh7372 CEU supports up to 8188x8188 images
  ARM: mach-shmobile: mackerel: Add FSI DMAEngine support

Documentation/devicetree/bindings/ata/calxeda-sata.txt → Documentation/devicetree/bindings/ata/ahci-platform.txt

@@ -1,10 +1,10 @@
-* Calxeda SATA Controller
+* AHCI SATA Controller
 
 SATA nodes are defined to describe on-chip Serial ATA controllers.
 Each SATA controller should have its own node.
 
 Required properties:
-- compatible        : compatible list, contains "calxeda,hb-ahci"
+- compatible        : compatible list, contains "calxeda,hb-ahci" or "snps,spear-ahci"
 - interrupts        : <interrupt mapping for SATA IRQ>
 - reg               : <registers mapping>
 
@@ -14,4 +14,3 @@ Example:
                 reg = <0xffe08000 0x1000>;
                 interrupts = <115>;
         };
-

Documentation/devicetree/bindings/sound/sgtl5000.txt

@@ -3,6 +3,8 @@
 Required properties:
 - compatible : "fsl,sgtl5000".
 
+- reg : the I2C address of the device
+
 Example:
 
 codec: sgtl5000@0a {

Documentation/networking/ip-sysctl.txt

@@ -147,7 +147,7 @@ tcp_adv_win_scale - INTEGER
 	(if tcp_adv_win_scale > 0) or bytes-bytes/2^(-tcp_adv_win_scale),
 	if it is <= 0.
 	Possible values are [-31, 31], inclusive.
-	Default: 2
+	Default: 1
 
 tcp_allowed_congestion_control - STRING
 	Show/set the congestion control choices available to non-privileged
@@ -410,7 +410,7 @@ tcp_rmem - vector of 3 INTEGERs: min, default, max
 	net.core.rmem_max.  Calling setsockopt() with SO_RCVBUF disables
 	automatic tuning of that socket's receive buffer size, in which
 	case this value is ignored.
-	Default: between 87380B and 4MB, depending on RAM size.
+	Default: between 87380B and 6MB, depending on RAM size.
 
 tcp_sack - BOOLEAN
 	Enable select acknowledgments (SACKS).

MAINTAINERS

@@ -1968,10 +1968,7 @@ S:	Maintained
 F:	drivers/net/ethernet/ti/cpmac.c
 
 CPU FREQUENCY DRIVERS
-M:	Dave Jones <davej@redhat.com>
 L:	cpufreq@vger.kernel.org
-W:	http://www.codemonkey.org.uk/projects/cpufreq/
-T:	git git://git.kernel.org/pub/scm/linux/kernel/git/davej/cpufreq.git
 S:	Maintained
 F:	drivers/cpufreq/
 F:	include/linux/cpufreq.h
@@ -5892,11 +5889,11 @@ F:	Documentation/scsi/st.txt
 F:	drivers/scsi/st*
 
 SCTP PROTOCOL
-M:	Vlad Yasevich <vladislav.yasevich@hp.com>
+M:	Vlad Yasevich <vyasevich@gmail.com>
 M:	Sridhar Samudrala <sri@us.ibm.com>
 L:	linux-sctp@vger.kernel.org
 W:	http://lksctp.sourceforge.net
-S:	Supported
+S:	Maintained
 F:	Documentation/networking/sctp.txt
 F:	include/linux/sctp.h
 F:	include/net/sctp/

Makefile

@@ -1,7 +1,7 @@
 VERSION = 3
 PATCHLEVEL = 4
 SUBLEVEL = 0
-EXTRAVERSION = -rc5
+EXTRAVERSION = -rc6
 NAME = Saber-toothed Squirrel
 
 # *DOCUMENTATION*

arch/alpha/Kconfig

@@ -477,7 +477,7 @@ config ALPHA_BROKEN_IRQ_MASK
 
 config VGA_HOSE
 	bool
-	depends on ALPHA_GENERIC || ALPHA_TITAN || ALPHA_MARVEL || ALPHA_TSUNAMI
+	depends on VGA_CONSOLE && (ALPHA_GENERIC || ALPHA_TITAN || ALPHA_MARVEL || ALPHA_TSUNAMI)
 	default y
 	help
 	  Support VGA on an arbitrary hose; needed for several platforms

arch/alpha/include/asm/rtc.h

@@ -1,14 +1,10 @@
 #ifndef _ALPHA_RTC_H
 #define _ALPHA_RTC_H
 
-#if defined(CONFIG_ALPHA_GENERIC)
+#if defined(CONFIG_ALPHA_MARVEL) && defined(CONFIG_SMP) \
+ || defined(CONFIG_ALPHA_GENERIC)
 # define get_rtc_time		alpha_mv.rtc_get_time
 # define set_rtc_time		alpha_mv.rtc_set_time
-#else
-# if defined(CONFIG_ALPHA_MARVEL) && defined(CONFIG_SMP)
-#  define get_rtc_time		marvel_get_rtc_time
-#  define set_rtc_time		marvel_set_rtc_time
-# endif
 #endif
 
 #include <asm-generic/rtc.h>

arch/alpha/kernel/core_tsunami.c

@@ -11,6 +11,7 @@
 #include <asm/core_tsunami.h>
 #undef __EXTERN_INLINE
 
+#include <linux/module.h>
 #include <linux/types.h>
 #include <linux/pci.h>
 #include <linux/sched.h>

arch/alpha/kernel/sys_marvel.c

@@ -317,7 +317,7 @@ marvel_init_irq(void)
 }
 
 static int 
-marvel_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
+marvel_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
 {
 	struct pci_controller *hose = dev->sysdata;
 	struct io7_port *io7_port = hose->sysdata;

arch/arm/Kconfig

@@ -1186,6 +1186,15 @@ if !MMU
 source "arch/arm/Kconfig-nommu"
 endif
 
+config ARM_ERRATA_326103
+	bool "ARM errata: FSR write bit incorrect on a SWP to read-only memory"
+	depends on CPU_V6
+	help
+	  Executing a SWP instruction to read-only memory does not set bit 11
+	  of the FSR on the ARM 1136 prior to r1p0. This causes the kernel to
+	  treat the access as a read, preventing a COW from occurring and
+	  causing the faulting task to livelock.
+
 config ARM_ERRATA_411920
 	bool "ARM errata: Invalidation of the Instruction Cache operation can fail"
 	depends on CPU_V6 || CPU_V6K

arch/arm/boot/dts/sh7372.dtsi

@@ -0,0 +1,21 @@
+/*
+ * Device Tree Source for the sh7372 SoC
+ *
+ * Copyright (C) 2012 Renesas Solutions Corp.
+ *
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2.  This program is licensed "as is" without any warranty of any
+ * kind, whether express or implied.
+ */
+
+/include/ "skeleton.dtsi"
+
+/ {
+	compatible = "renesas,sh7372";
+
+	cpus {
+		cpu@0 {
+			compatible = "arm,cortex-a8";
+		};
+	};
+};

arch/arm/boot/dts/versatile-ab.dts

@@ -173,7 +173,7 @@
 			mmc@5000 {
 				compatible = "arm,primecell";
 				reg = < 0x5000 0x1000>;
-				interrupts = <22>;
+				interrupts = <22 34>;
 			};
 			kmi@6000 {
 				compatible = "arm,pl050", "arm,primecell";

arch/arm/boot/dts/versatile-pb.dts

@@ -41,7 +41,7 @@
 			mmc@b000 {
 				compatible = "arm,primecell";
 				reg = <0xb000 0x1000>;
-				interrupts = <23>;
+				interrupts = <23 34>;
 			};
 		};
 	};

arch/arm/include/asm/thread_info.h

@@ -118,6 +118,13 @@ extern void iwmmxt_task_switch(struct thread_info *);
 extern void vfp_sync_hwstate(struct thread_info *);
 extern void vfp_flush_hwstate(struct thread_info *);
 
+struct user_vfp;
+struct user_vfp_exc;
+
+extern int vfp_preserve_user_clear_hwstate(struct user_vfp __user *,
+					   struct user_vfp_exc __user *);
+extern int vfp_restore_user_hwstate(struct user_vfp __user *,
+				    struct user_vfp_exc __user *);
 #endif
 
 /*

arch/arm/include/asm/tls.h

@@ -7,6 +7,8 @@
 
 	.macro set_tls_v6k, tp, tmp1, tmp2
 	mcr	p15, 0, \tp, c13, c0, 3		@ set TLS register
+	mov	\tmp1, #0
+	mcr	p15, 0, \tmp1, c13, c0, 2	@ clear user r/w TLS register
 	.endm
 
 	.macro set_tls_v6, tp, tmp1, tmp2
@@ -15,6 +17,8 @@
 	mov	\tmp2, #0xffff0fff
 	tst	\tmp1, #HWCAP_TLS		@ hardware TLS available?
 	mcrne	p15, 0, \tp, c13, c0, 3		@ yes, set TLS register
+	movne	\tmp1, #0
+	mcrne	p15, 0, \tmp1, c13, c0, 2	@ clear user r/w TLS register
 	streq	\tp, [\tmp2, #-15]		@ set TLS value at 0xffff0ff0
 	.endm
 

arch/arm/kernel/irq.c

@@ -155,10 +155,10 @@ static bool migrate_one_irq(struct irq_desc *desc)
 	}
 
 	c = irq_data_get_irq_chip(d);
-	if (c->irq_set_affinity)
-		c->irq_set_affinity(d, affinity, true);
-	else
+	if (!c->irq_set_affinity)
 		pr_debug("IRQ%u: unable to set affinity\n", d->irq);
+	else if (c->irq_set_affinity(d, affinity, true) == IRQ_SET_MASK_OK && ret)
+		cpumask_copy(d->affinity, affinity);
 
 	return ret;
 }

arch/arm/kernel/signal.c

@@ -180,44 +180,23 @@ static int restore_iwmmxt_context(struct iwmmxt_sigframe *frame)
 
 static int preserve_vfp_context(struct vfp_sigframe __user *frame)
 {
-	struct thread_info *thread = current_thread_info();
-	struct vfp_hard_struct *h = &thread->vfpstate.hard;
 	const unsigned long magic = VFP_MAGIC;
 	const unsigned long size = VFP_STORAGE_SIZE;
 	int err = 0;
 
-	vfp_sync_hwstate(thread);
 	__put_user_error(magic, &frame->magic, err);
 	__put_user_error(size, &frame->size, err);
 
-	/*
-	 * Copy the floating point registers. There can be unused
-	 * registers see asm/hwcap.h for details.
-	 */
-	err |= __copy_to_user(&frame->ufp.fpregs, &h->fpregs,
-			      sizeof(h->fpregs));
-	/*
-	 * Copy the status and control register.
-	 */
-	__put_user_error(h->fpscr, &frame->ufp.fpscr, err);
-
-	/*
-	 * Copy the exception registers.
-	 */
-	__put_user_error(h->fpexc, &frame->ufp_exc.fpexc, err);
-	__put_user_error(h->fpinst, &frame->ufp_exc.fpinst, err);
-	__put_user_error(h->fpinst2, &frame->ufp_exc.fpinst2, err);
+	if (err)
+		return -EFAULT;
 
-	return err ? -EFAULT : 0;
+	return vfp_preserve_user_clear_hwstate(&frame->ufp, &frame->ufp_exc);
 }
 
 static int restore_vfp_context(struct vfp_sigframe __user *frame)
 {
-	struct thread_info *thread = current_thread_info();
-	struct vfp_hard_struct *h = &thread->vfpstate.hard;
 	unsigned long magic;
 	unsigned long size;
-	unsigned long fpexc;
 	int err = 0;
 
 	__get_user_error(magic, &frame->magic, err);
@@ -228,33 +207,7 @@ static int restore_vfp_context(struct vfp_sigframe __user *frame)
 	if (magic != VFP_MAGIC || size != VFP_STORAGE_SIZE)
 		return -EINVAL;
 
-	vfp_flush_hwstate(thread);
-
-	/*
-	 * Copy the floating point registers. There can be unused
-	 * registers see asm/hwcap.h for details.
-	 */
-	err |= __copy_from_user(&h->fpregs, &frame->ufp.fpregs,
-				sizeof(h->fpregs));
-	/*
-	 * Copy the status and control register.
-	 */
-	__get_user_error(h->fpscr, &frame->ufp.fpscr, err);
-
-	/*
-	 * Sanitise and restore the exception registers.
-	 */
-	__get_user_error(fpexc, &frame->ufp_exc.fpexc, err);
-	/* Ensure the VFP is enabled. */
-	fpexc |= FPEXC_EN;
-	/* Ensure FPINST2 is invalid and the exception flag is cleared. */
-	fpexc &= ~(FPEXC_EX | FPEXC_FP2V);
-	h->fpexc = fpexc;
-
-	__get_user_error(h->fpinst, &frame->ufp_exc.fpinst, err);
-	__get_user_error(h->fpinst2, &frame->ufp_exc.fpinst2, err);
-
-	return err ? -EFAULT : 0;
+	return vfp_restore_user_hwstate(&frame->ufp, &frame->ufp_exc);
 }
 
 #endif

arch/arm/kernel/smp.c

@@ -510,10 +510,6 @@ static void ipi_cpu_stop(unsigned int cpu)
 	local_fiq_disable();
 	local_irq_disable();
 
-#ifdef CONFIG_HOTPLUG_CPU
-	platform_cpu_kill(cpu);
-#endif
-
 	while (1)
 		cpu_relax();
 }
@@ -576,17 +572,25 @@ void smp_send_reschedule(int cpu)
 	smp_cross_call(cpumask_of(cpu), IPI_RESCHEDULE);
 }
 
+#ifdef CONFIG_HOTPLUG_CPU
+static void smp_kill_cpus(cpumask_t *mask)
+{
+	unsigned int cpu;
+	for_each_cpu(cpu, mask)
+		platform_cpu_kill(cpu);
+}
+#else
+static void smp_kill_cpus(cpumask_t *mask) { }
+#endif
+
 void smp_send_stop(void)
 {
 	unsigned long timeout;
+	struct cpumask mask;
 
-	if (num_online_cpus() > 1) {
-		struct cpumask mask;
-		cpumask_copy(&mask, cpu_online_mask);
-		cpumask_clear_cpu(smp_processor_id(), &mask);
-
-		smp_cross_call(&mask, IPI_CPU_STOP);
-	}
+	cpumask_copy(&mask, cpu_online_mask);
+	cpumask_clear_cpu(smp_processor_id(), &mask);
+	smp_cross_call(&mask, IPI_CPU_STOP);
 
 	/* Wait up to one second for other CPUs to stop */
 	timeout = USEC_PER_SEC;
@@ -595,6 +599,8 @@ void smp_send_stop(void)
 
 	if (num_online_cpus() > 1)
 		pr_warning("SMP: failed to stop secondary CPUs\n");
+
+	smp_kill_cpus(&mask);
 }
 
 /*

arch/arm/mach-shmobile/board-ag5evm.c

@@ -365,23 +365,13 @@ static struct platform_device mipidsi0_device = {
 };
 
 /* SDHI0 */
-static irqreturn_t ag5evm_sdhi0_gpio_cd(int irq, void *arg)
-{
-	struct device *dev = arg;
-	struct sh_mobile_sdhi_info *info = dev->platform_data;
-	struct tmio_mmc_data *pdata = info->pdata;
-
-	tmio_mmc_cd_wakeup(pdata);
-
-	return IRQ_HANDLED;
-}
-
 static struct sh_mobile_sdhi_info sdhi0_info = {
 	.dma_slave_tx	= SHDMA_SLAVE_SDHI0_TX,
 	.dma_slave_rx	= SHDMA_SLAVE_SDHI0_RX,
-	.tmio_flags	= TMIO_MMC_HAS_IDLE_WAIT,
+	.tmio_flags	= TMIO_MMC_HAS_IDLE_WAIT | TMIO_MMC_USE_GPIO_CD,
 	.tmio_caps	= MMC_CAP_SD_HIGHSPEED,
 	.tmio_ocr_mask	= MMC_VDD_27_28 | MMC_VDD_28_29,
+	.cd_gpio	= GPIO_PORT251,
 };
 
 static struct resource sdhi0_resources[] = {
@@ -557,7 +547,6 @@ static void __init ag5evm_init(void)
 	lcd_backlight_reset();
 
 	/* enable SDHI0 on CN15 [SD I/F] */
-	gpio_request(GPIO_FN_SDHICD0, NULL);
 	gpio_request(GPIO_FN_SDHIWP0, NULL);
 	gpio_request(GPIO_FN_SDHICMD0, NULL);
 	gpio_request(GPIO_FN_SDHICLK0, NULL);
@@ -566,13 +555,6 @@ static void __init ag5evm_init(void)
 	gpio_request(GPIO_FN_SDHID0_1, NULL);
 	gpio_request(GPIO_FN_SDHID0_0, NULL);
 
-	if (!request_irq(intcs_evt2irq(0x3c0), ag5evm_sdhi0_gpio_cd,
-			 IRQF_TRIGGER_FALLING | IRQF_TRIGGER_RISING,
-			 "sdhi0 cd", &sdhi0_device.dev))
-		sdhi0_info.tmio_flags |= TMIO_MMC_HAS_COLD_CD;
-	else
-		pr_warn("Unable to setup SDHI0 GPIO IRQ\n");
-
 	/* enable SDHI1 on CN4 [WLAN I/F] */
 	gpio_request(GPIO_FN_SDHICLK1, NULL);
 	gpio_request(GPIO_FN_SDHICMD1_PU, NULL);

arch/arm/mach-shmobile/board-ap4evb.c

@@ -997,6 +997,8 @@ static struct sh_mobile_ceu_companion csi2 = {
 
 static struct sh_mobile_ceu_info sh_mobile_ceu_info = {
 	.flags = SH_CEU_FLAG_USE_8BIT_BUS,
+	.max_width = 8188,
+	.max_height = 8188,
 	.csi2 = &csi2,
 };
 

arch/arm/mach-shmobile/board-bonito.c

@@ -486,7 +486,7 @@ static void __init bonito_earlytimer_init(void)
 	shmobile_earlytimer_init();
 }
 
-void __init bonito_add_early_devices(void)
+static void __init bonito_add_early_devices(void)
 {
 	r8a7740_add_early_devices();
 

arch/arm/mach-shmobile/board-mackerel.c

@@ -908,6 +908,8 @@ fsi_set_rate_end:
 static struct sh_fsi_platform_info fsi_info = {
 	.port_a = {
 		.flags = SH_FSI_BRS_INV,
+		.tx_id = SHDMA_SLAVE_FSIA_TX,
+		.rx_id = SHDMA_SLAVE_FSIA_RX,
 	},
 	.port_b = {
 		.flags = SH_FSI_BRS_INV	|
@@ -920,9 +922,11 @@ static struct sh_fsi_platform_info fsi_info = {
 
 static struct resource fsi_resources[] = {
 	[0] = {
+		/* we need 0xFE1F0000 to access DMA
+		 * instead of 0xFE3C0000 */
 		.name	= "FSI",
-		.start	= 0xFE3C0000,
-		.end	= 0xFE3C0400 - 1,
+		.start  = 0xFE1F0000,
+		.end    = 0xFE1F0400 - 1,
 		.flags	= IORESOURCE_MEM,
 	},
 	[1] = {
@@ -1011,21 +1015,12 @@ static int slot_cn7_get_cd(struct platform_device *pdev)
 }
 
 /* SDHI0 */
-static irqreturn_t mackerel_sdhi0_gpio_cd(int irq, void *arg)
-{
-	struct device *dev = arg;
-	struct sh_mobile_sdhi_info *info = dev->platform_data;
-	struct tmio_mmc_data *pdata = info->pdata;
-
-	tmio_mmc_cd_wakeup(pdata);
-
-	return IRQ_HANDLED;
-}
-
 static struct sh_mobile_sdhi_info sdhi0_info = {
 	.dma_slave_tx	= SHDMA_SLAVE_SDHI0_TX,
 	.dma_slave_rx	= SHDMA_SLAVE_SDHI0_RX,
+	.tmio_flags	= TMIO_MMC_USE_GPIO_CD,
 	.tmio_caps	= MMC_CAP_SD_HIGHSPEED | MMC_CAP_SDIO_IRQ,
+	.cd_gpio	= GPIO_PORT172,
 };
 
 static struct resource sdhi0_resources[] = {
@@ -1257,6 +1252,8 @@ static void mackerel_camera_del(struct soc_camera_device *icd)
 
 static struct sh_mobile_ceu_info sh_mobile_ceu_info = {
 	.flags = SH_CEU_FLAG_USE_8BIT_BUS,
+	.max_width = 8188,
+	.max_height = 8188,
 };
 
 static struct resource ceu_resources[] = {
@@ -1384,7 +1381,6 @@ static void __init mackerel_init(void)
 {
 	u32 srcr4;
 	struct clk *clk;
-	int ret;
 
 	/* External clock source */
 	clk_set_rate(&sh7372_dv_clki_clk, 27000000);
@@ -1481,7 +1477,6 @@ static void __init mackerel_init(void)
 	irq_set_irq_type(IRQ21, IRQ_TYPE_LEVEL_HIGH);
 
 	/* enable SDHI0 */
-	gpio_request(GPIO_FN_SDHICD0, NULL);
 	gpio_request(GPIO_FN_SDHIWP0, NULL);
 	gpio_request(GPIO_FN_SDHICMD0, NULL);
 	gpio_request(GPIO_FN_SDHICLK0, NULL);
@@ -1490,13 +1485,6 @@ static void __init mackerel_init(void)
 	gpio_request(GPIO_FN_SDHID0_1, NULL);
 	gpio_request(GPIO_FN_SDHID0_0, NULL);
 
-	ret = request_irq(evt2irq(0x3340), mackerel_sdhi0_gpio_cd,
-			  IRQF_TRIGGER_FALLING, "sdhi0 cd", &sdhi0_device.dev);
-	if (!ret)
-		sdhi0_info.tmio_flags |= TMIO_MMC_HAS_COLD_CD;
-	else
-		pr_err("Cannot get IRQ #%d: %d\n", evt2irq(0x3340), ret);
-
 #if !defined(CONFIG_MMC_SH_MMCIF) && !defined(CONFIG_MMC_SH_MMCIF_MODULE)
 	/* enable SDHI1 */
 	gpio_request(GPIO_FN_SDHICMD1, NULL);

arch/arm/mach-shmobile/clock-r8a7740.c

@@ -47,6 +47,7 @@
 #define PLLC01CR	0xe6150028
 
 #define SUBCKCR		0xe6150080
+#define USBCKCR		0xe615008c
 
 #define MSTPSR0		0xe6150030
 #define MSTPSR1		0xe6150038
@@ -181,6 +182,95 @@ static struct clk pllc1_div2_clk = {
 	.parent		= &pllc1_clk,
 };
 
+/* USB clock */
+static struct clk *usb24s_parents[] = {
+	[0] = &system_clk,
+	[1] = &extal2_clk
+};
+
+static int usb24s_enable(struct clk *clk)
+{
+	__raw_writel(__raw_readl(USBCKCR) & ~(1 << 8), USBCKCR);
+
+	return 0;
+}
+
+static void usb24s_disable(struct clk *clk)
+{
+	__raw_writel(__raw_readl(USBCKCR) | (1 << 8), USBCKCR);
+}
+
+static int usb24s_set_parent(struct clk *clk, struct clk *parent)
+{
+	int i, ret;
+	u32 val;
+
+	if (!clk->parent_table || !clk->parent_num)
+		return -EINVAL;
+
+	/* Search the parent */
+	for (i = 0; i < clk->parent_num; i++)
+		if (clk->parent_table[i] == parent)
+			break;
+
+	if (i == clk->parent_num)
+		return -ENODEV;
+
+	ret = clk_reparent(clk, parent);
+	if (ret < 0)
+		return ret;
+
+	val = __raw_readl(USBCKCR);
+	val &= ~(1 << 7);
+	val |= i << 7;
+	__raw_writel(val, USBCKCR);
+
+	return 0;
+}
+
+static struct sh_clk_ops usb24s_clk_ops = {
+	.recalc		= followparent_recalc,
+	.enable		= usb24s_enable,
+	.disable	= usb24s_disable,
+	.set_parent	= usb24s_set_parent,
+};
+
+static struct clk usb24s_clk = {
+	.ops		= &usb24s_clk_ops,
+	.parent_table	= usb24s_parents,
+	.parent_num	= ARRAY_SIZE(usb24s_parents),
+	.parent		= &system_clk,
+};
+
+static unsigned long usb24_recalc(struct clk *clk)
+{
+	return clk->parent->rate /
+		((__raw_readl(USBCKCR) & (1 << 6)) ? 1 : 2);
+};
+
+static int usb24_set_rate(struct clk *clk, unsigned long rate)
+{
+	u32 val;
+
+	/* closer to which ? parent->rate or parent->rate/2 */
+	val = __raw_readl(USBCKCR);
+	val &= ~(1 << 6);
+	val |= (rate > (clk->parent->rate / 4) * 3) << 6;
+	__raw_writel(val, USBCKCR);
+
+	return 0;
+}
+
+static struct sh_clk_ops usb24_clk_ops = {
+	.recalc		= usb24_recalc,
+	.set_rate	= usb24_set_rate,
+};
+
+static struct clk usb24_clk = {
+	.ops		= &usb24_clk_ops,
+	.parent		= &usb24s_clk,
+};
+
 struct clk *main_clks[] = {
 	&extalr_clk,
 	&extal1_clk,
@@ -196,6 +286,8 @@ struct clk *main_clks[] = {
 	&pllc0_clk,
 	&pllc1_clk,
 	&pllc1_div2_clk,
+	&usb24s_clk,
+	&usb24_clk,
 };
 
 static void div4_kick(struct clk *clk)
@@ -223,7 +315,7 @@ static struct clk_div4_table div4_table = {
 
 enum {
 	DIV4_I, DIV4_ZG, DIV4_B, DIV4_M1, DIV4_HP,
-	DIV4_HPP, DIV4_S, DIV4_ZB, DIV4_M3, DIV4_CP,
+	DIV4_HPP, DIV4_USBP, DIV4_S, DIV4_ZB, DIV4_M3, DIV4_CP,
 	DIV4_NR
 };
 
@@ -234,6 +326,7 @@ struct clk div4_clks[DIV4_NR] = {
 	[DIV4_M1]	= SH_CLK_DIV4(&pllc1_clk, FRQCRA,  4, 0x6fff, CLK_ENABLE_ON_INIT),
 	[DIV4_HP]	= SH_CLK_DIV4(&pllc1_clk, FRQCRB,  4, 0x6fff, 0),
 	[DIV4_HPP]	= SH_CLK_DIV4(&pllc1_clk, FRQCRC, 20, 0x6fff, 0),
+	[DIV4_USBP]	= SH_CLK_DIV4(&pllc1_clk, FRQCRC, 16, 0x6fff, 0),
 	[DIV4_S]	= SH_CLK_DIV4(&pllc1_clk, FRQCRC, 12, 0x6fff, 0),
 	[DIV4_ZB]	= SH_CLK_DIV4(&pllc1_clk, FRQCRC,  8, 0x6fff, 0),
 	[DIV4_M3]	= SH_CLK_DIV4(&pllc1_clk, FRQCRC,  4, 0x6fff, 0),
@@ -257,7 +350,10 @@ enum {
 	MSTP222,
 	MSTP207, MSTP206, MSTP204, MSTP203, MSTP202, MSTP201, MSTP200,
 
-	MSTP329, MSTP323,
+	MSTP329, MSTP328, MSTP323, MSTP320,
+	MSTP314, MSTP313, MSTP312,
+
+	MSTP416, MSTP415, MSTP407, MSTP406,
 
 	MSTP_NR
 };
@@ -280,7 +376,17 @@ static struct clk mstp_clks[MSTP_NR] = {
 	[MSTP200] = SH_CLK_MSTP32(&div6_clks[DIV6_SUB],	SMSTPCR2,  0, 0), /* SCIFA4 */
 
 	[MSTP329] = SH_CLK_MSTP32(&r_clk,		SMSTPCR3, 29, 0), /* CMT10 */
+	[MSTP328] = SH_CLK_MSTP32(&div4_clks[DIV4_HP],	SMSTPCR3, 28, 0), /* FSI */
 	[MSTP323] = SH_CLK_MSTP32(&div6_clks[DIV6_SUB],	SMSTPCR3, 23, 0), /* IIC1 */
+	[MSTP320] = SH_CLK_MSTP32(&div4_clks[DIV4_HP],	SMSTPCR3, 20, 0), /* USBF */
+	[MSTP314] = SH_CLK_MSTP32(&div4_clks[DIV4_HP],	SMSTPCR3, 14, 0), /* SDHI0 */
+	[MSTP313] = SH_CLK_MSTP32(&div4_clks[DIV4_HP],	SMSTPCR3, 13, 0), /* SDHI1 */
+	[MSTP312] = SH_CLK_MSTP32(&div4_clks[DIV4_HP],	SMSTPCR3, 12, 0), /* MMC */
+
+	[MSTP416] = SH_CLK_MSTP32(&div4_clks[DIV4_HP],	SMSTPCR4, 16, 0), /* USBHOST */
+	[MSTP415] = SH_CLK_MSTP32(&div4_clks[DIV4_HP],	SMSTPCR4, 15, 0), /* SDHI2 */
+	[MSTP407] = SH_CLK_MSTP32(&div4_clks[DIV4_HP],	SMSTPCR4,  7, 0), /* USB-Func */
+	[MSTP406] = SH_CLK_MSTP32(&div4_clks[DIV4_HP],	SMSTPCR4,  6, 0), /* USB Phy */
 };
 
 static struct clk_lookup lookups[] = {
@@ -299,6 +405,7 @@ static struct clk_lookup lookups[] = {
 	CLKDEV_CON_ID("pllc0_clk",		&pllc0_clk),
 	CLKDEV_CON_ID("pllc1_clk",		&pllc1_clk),
 	CLKDEV_CON_ID("pllc1_div2_clk",		&pllc1_div2_clk),
+	CLKDEV_CON_ID("usb24s",			&usb24s_clk),
 
 	/* DIV4 clocks */
 	CLKDEV_CON_ID("i_clk",			&div4_clks[DIV4_I]),
@@ -334,7 +441,21 @@ static struct clk_lookup lookups[] = {
 	CLKDEV_DEV_ID("sh-sci.6",		&mstp_clks[MSTP230]),
 
 	CLKDEV_DEV_ID("sh_cmt.10",		&mstp_clks[MSTP329]),
+	CLKDEV_DEV_ID("sh_fsi2",		&mstp_clks[MSTP328]),
 	CLKDEV_DEV_ID("i2c-sh_mobile.1",	&mstp_clks[MSTP323]),
+	CLKDEV_DEV_ID("renesas_usbhs",		&mstp_clks[MSTP320]),
+	CLKDEV_DEV_ID("sh_mobile_sdhi.0",	&mstp_clks[MSTP314]),
+	CLKDEV_DEV_ID("sh_mobile_sdhi.1",	&mstp_clks[MSTP313]),
+	CLKDEV_DEV_ID("sh_mmcif",		&mstp_clks[MSTP312]),
+
+	CLKDEV_DEV_ID("sh_mobile_sdhi.2",	&mstp_clks[MSTP415]),
+
+	/* ICK */
+	CLKDEV_ICK_ID("host",	"renesas_usbhs",	&mstp_clks[MSTP416]),
+	CLKDEV_ICK_ID("func",	"renesas_usbhs",	&mstp_clks[MSTP407]),
+	CLKDEV_ICK_ID("phy",	"renesas_usbhs",	&mstp_clks[MSTP406]),
+	CLKDEV_ICK_ID("pci",	"renesas_usbhs",	&div4_clks[DIV4_USBP]),
+	CLKDEV_ICK_ID("usb24",	"renesas_usbhs",	&usb24_clk),
 };
 
 void __init r8a7740_clock_init(u8 md_ck)

arch/arm/mach-shmobile/headsmp.S

@@ -16,6 +16,59 @@
 
 	__CPUINIT
 
+/* Cache invalidation nicked from arch/arm/mach-imx/head-v7.S, thanks!
+ *
+ * The secondary kernel init calls v7_flush_dcache_all before it enables
+ * the L1; however, the L1 comes out of reset in an undefined state, so
+ * the clean + invalidate performed by v7_flush_dcache_all causes a bunch
+ * of cache lines with uninitialized data and uninitialized tags to get
+ * written out to memory, which does really unpleasant things to the main
+ * processor.  We fix this by performing an invalidate, rather than a
+ * clean + invalidate, before jumping into the kernel.
+ *
+ * This funciton is cloned from arch/arm/mach-tegra/headsmp.S, and needs
+ * to be called for both secondary cores startup and primary core resume
+ * procedures.  Ideally, it should be moved into arch/arm/mm/cache-v7.S.
+ */
+ENTRY(v7_invalidate_l1)
+	mov	r0, #0
+	mcr	p15, 0, r0, c7, c5, 0	@ invalidate I cache
+	mcr	p15, 2, r0, c0, c0, 0
+	mrc	p15, 1, r0, c0, c0, 0
+
+	ldr	r1, =0x7fff
+	and	r2, r1, r0, lsr #13
+
+	ldr	r1, =0x3ff
+
+	and	r3, r1, r0, lsr #3	@ NumWays - 1
+	add	r2, r2, #1		@ NumSets
+
+	and	r0, r0, #0x7
+	add	r0, r0, #4	@ SetShift
+
+	clz	r1, r3		@ WayShift
+	add	r4, r3, #1	@ NumWays
+1:	sub	r2, r2, #1	@ NumSets--
+	mov	r3, r4		@ Temp = NumWays
+2:	subs	r3, r3, #1	@ Temp--
+	mov	r5, r3, lsl r1
+	mov	r6, r2, lsl r0
+	orr	r5, r5, r6	@ Reg = (Temp<<WayShift)|(NumSets<<SetShift)
+	mcr	p15, 0, r5, c7, c6, 2
+	bgt	2b
+	cmp	r2, #0
+	bgt	1b
+	dsb
+	isb
+	mov	pc, lr
+ENDPROC(v7_invalidate_l1)
+
+ENTRY(shmobile_invalidate_start)
+	bl	v7_invalidate_l1
+	b	secondary_startup
+ENDPROC(shmobile_invalidate_start)
+
 /*
  * Reset vector for secondary CPUs.
  * This will be mapped at address 0 by SBAR register.
@@ -24,4 +77,5 @@
 	.align  12
 ENTRY(shmobile_secondary_vector)
 	ldr     pc, 1f
-1:	.long   secondary_startup - PAGE_OFFSET + PLAT_PHYS_OFFSET
+1:	.long   shmobile_invalidate_start - PAGE_OFFSET + PLAT_PHYS_OFFSET
+ENDPROC(shmobile_secondary_vector)

arch/arm/mach-shmobile/include/mach/common.h

@@ -3,8 +3,9 @@
 
 extern void shmobile_earlytimer_init(void);
 extern struct sys_timer shmobile_timer;
+extern void shmobile_setup_delay(unsigned int max_cpu_core_mhz,
+				 unsigned int mult, unsigned int div);
 struct twd_local_timer;
-void shmobile_twd_init(struct twd_local_timer *twd_local_timer);
 extern void shmobile_setup_console(void);
 extern void shmobile_secondary_vector(void);
 extern int shmobile_platform_cpu_kill(unsigned int cpu);
@@ -82,5 +83,6 @@ extern int r8a7779_platform_cpu_kill(unsigned int cpu);
 extern void r8a7779_secondary_init(unsigned int cpu);
 extern int r8a7779_boot_secondary(unsigned int cpu);
 extern void r8a7779_smp_prepare_cpus(void);
+extern void r8a7779_register_twd(void);
 
 #endif /* __ARCH_MACH_COMMON_H */

arch/arm/mach-shmobile/include/mach/intc.h

@@ -142,6 +142,50 @@ static struct intc_desc p ## _desc __initdata = {			\
 			     p ## _sense_registers, p ## _ack_registers) \
 }
 
+#define INTC_IRQ_PINS_16H(p, base, vect, str)				\
+									\
+static struct resource p ## _resources[] __initdata = {			\
+	[0] = {								\
+		.start	= base,						\
+		.end	= base + 0x64,					\
+		.flags	= IORESOURCE_MEM,				\
+	},								\
+};									\
+									\
+enum {									\
+	p ## _UNUSED = 0,						\
+	INTC_IRQ_PINS_ENUM_16H(p),					\
+};									\
+									\
+static struct intc_vect p ## _vectors[] __initdata = {			\
+	INTC_IRQ_PINS_VECT_16H(p, vect),				\
+};									\
+									\
+static struct intc_mask_reg p ## _mask_registers[] __initdata = {	\
+	INTC_IRQ_PINS_MASK_16H(p, base),				\
+};									\
+									\
+static struct intc_prio_reg p ## _prio_registers[] __initdata = {	\
+	INTC_IRQ_PINS_PRIO_16H(p, base),				\
+};									\
+									\
+static struct intc_sense_reg p ## _sense_registers[] __initdata = {	\
+	INTC_IRQ_PINS_SENSE_16H(p, base),				\
+};									\
+									\
+static struct intc_mask_reg p ## _ack_registers[] __initdata = {	\
+	INTC_IRQ_PINS_ACK_16H(p, base),					\
+};									\
+									\
+static struct intc_desc p ## _desc __initdata = {			\
+	.name = str,							\
+	.resource = p ## _resources,					\
+	.num_resources = ARRAY_SIZE(p ## _resources),			\
+	.hw = INTC_HW_DESC(p ## _vectors, NULL,				\
+			     p ## _mask_registers, p ## _prio_registers, \
+			     p ## _sense_registers, p ## _ack_registers) \
+}
+
 #define INTC_IRQ_PINS_32(p, base, vect, str)				\
 									\
 static struct resource p ## _resources[] __initdata = {			\

arch/arm/mach-shmobile/include/mach/irqs.h

@@ -7,7 +7,7 @@
 #define gic_spi(nr)		((nr) + 32)
 
 /* INTCS */
-#define INTCS_VECT_BASE		0x2200
+#define INTCS_VECT_BASE		0x3400
 #define INTCS_VECT(n, vect)	INTC_VECT((n), INTCS_VECT_BASE + (vect))
 #define intcs_evt2irq(evt)	evt2irq(INTCS_VECT_BASE + (evt))
 

arch/arm/mach-shmobile/include/mach/sh7372.h

@@ -457,6 +457,8 @@ enum {
 	SHDMA_SLAVE_SDHI1_TX,
 	SHDMA_SLAVE_SDHI2_RX,
 	SHDMA_SLAVE_SDHI2_TX,
+	SHDMA_SLAVE_FSIA_RX,
+	SHDMA_SLAVE_FSIA_TX,
 	SHDMA_SLAVE_MMCIF_RX,
 	SHDMA_SLAVE_MMCIF_TX,
 	SHDMA_SLAVE_USB0_TX,

arch/arm/mach-shmobile/intc-sh7372.c

@@ -19,6 +19,7 @@
 #include <linux/kernel.h>
 #include <linux/init.h>
 #include <linux/interrupt.h>
+#include <linux/module.h>
 #include <linux/irq.h>
 #include <linux/io.h>
 #include <linux/sh_intc.h>
@@ -305,14 +306,16 @@ static DECLARE_INTC_DESC(intca_desc, "sh7372-intca",
 			 intca_mask_registers, intca_prio_registers,
 			 NULL);
 
-INTC_IRQ_PINS_32(intca_irq_pins, 0xe6900000,
-		 INTC_VECT, "sh7372-intca-irq-pins");
+INTC_IRQ_PINS_16(intca_irq_pins_lo, 0xe6900000,
+		 INTC_VECT, "sh7372-intca-irq-lo");
+
+INTC_IRQ_PINS_16H(intca_irq_pins_hi, 0xe6900000,
+		 INTC_VECT, "sh7372-intca-irq-hi");
+
 enum {
 	UNUSED_INTCS = 0,
 	ENABLED_INTCS,
 
-	INTCS,
-
 	/* interrupt sources INTCS */
 
 	/* IRQ0S - IRQ31S */
@@ -426,8 +429,6 @@ static struct intc_vect intcs_vectors[] = {
 	INTCS_VECT(CPORTS2R, 0x1a20),
 	/* CEC */
 	INTCS_VECT(JPU6E, 0x1a80),
-
-	INTC_VECT(INTCS, 0xf80),
 };
 
 static struct intc_group intcs_groups[] __initdata = {
@@ -490,9 +491,6 @@ static struct intc_mask_reg intcs_mask_registers[] = {
 	{ 0xffd5019c, 0xffd501dc, 8, /* IMR7SA3 / IMCR7SA3 */
 	  { MFIS2_INTCS, CPORTS2R, 0, 0,
 	    JPU6E, 0, 0, 0 } },
-	{ 0xffd20104, 0, 16, /* INTAMASK */
-	  { 0, 0, 0, 0, 0, 0, 0, 0,
-	    0, 0, 0, 0, 0, 0, 0, INTCS } },
 };
 
 /* Priority is needed for INTCA to receive the INTCS interrupt */
@@ -557,18 +555,30 @@ static void __iomem *intcs_ffd5;
 void __init sh7372_init_irq(void)
 {
 	void __iomem *intevtsa;
+	int n;
 
 	intcs_ffd2 = ioremap_nocache(0xffd20000, PAGE_SIZE);
 	intevtsa = intcs_ffd2 + 0x100;
 	intcs_ffd5 = ioremap_nocache(0xffd50000, PAGE_SIZE);
 
 	register_intc_controller(&intca_desc);
-	register_intc_controller(&intca_irq_pins_desc);
+	register_intc_controller(&intca_irq_pins_lo_desc);
+	register_intc_controller(&intca_irq_pins_hi_desc);
 	register_intc_controller(&intcs_desc);
 
+	/* setup dummy cascade chip for INTCS */
+	n = evt2irq(0xf80);
+	irq_alloc_desc_at(n, numa_node_id());
+	irq_set_chip_and_handler_name(n, &dummy_irq_chip,
+				      handle_level_irq, "level");
+	set_irq_flags(n, IRQF_VALID); /* yuck */
+
 	/* demux using INTEVTSA */
-	irq_set_handler_data(evt2irq(0xf80), (void *)intevtsa);
-	irq_set_chained_handler(evt2irq(0xf80), intcs_demux);
+	irq_set_handler_data(n, (void *)intevtsa);
+	irq_set_chained_handler(n, intcs_demux);
+
+	/* unmask INTCS in INTAMASK */
+	iowrite16(0, intcs_ffd2 + 0x104);
 }
 
 static unsigned short ffd2[0x200];

arch/arm/mach-shmobile/pfc-r8a7740.c

@@ -22,6 +22,7 @@
 #include <linux/kernel.h>
 #include <linux/gpio.h>
 #include <mach/r8a7740.h>
+#include <mach/irqs.h>
 
 #define CPU_ALL_PORT(fn, pfx, sfx)					\
 	PORT_10(fn, pfx, sfx),		PORT_90(fn, pfx, sfx),		\
@@ -2527,6 +2528,41 @@ static struct pinmux_data_reg pinmux_data_regs[] = {
 	{ },
 };
 
+static struct pinmux_irq pinmux_irqs[] = {
+	PINMUX_IRQ(evt2irq(0x0200), PORT2_FN0,	 PORT13_FN0),	/* IRQ0A */
+	PINMUX_IRQ(evt2irq(0x0220), PORT20_FN0),		/* IRQ1A */
+	PINMUX_IRQ(evt2irq(0x0240), PORT11_FN0,	 PORT12_FN0),	/* IRQ2A */
+	PINMUX_IRQ(evt2irq(0x0260), PORT10_FN0,	 PORT14_FN0),	/* IRQ3A */
+	PINMUX_IRQ(evt2irq(0x0280), PORT15_FN0,	 PORT172_FN0),	/* IRQ4A */
+	PINMUX_IRQ(evt2irq(0x02A0), PORT0_FN0,	 PORT1_FN0),	/* IRQ5A */
+	PINMUX_IRQ(evt2irq(0x02C0), PORT121_FN0, PORT173_FN0),	/* IRQ6A */
+	PINMUX_IRQ(evt2irq(0x02E0), PORT120_FN0, PORT209_FN0),	/* IRQ7A */
+	PINMUX_IRQ(evt2irq(0x0300), PORT119_FN0),		/* IRQ8A */
+	PINMUX_IRQ(evt2irq(0x0320), PORT118_FN0, PORT210_FN0),	/* IRQ9A */
+	PINMUX_IRQ(evt2irq(0x0340), PORT19_FN0),		/* IRQ10A */
+	PINMUX_IRQ(evt2irq(0x0360), PORT104_FN0),		/* IRQ11A */
+	PINMUX_IRQ(evt2irq(0x0380), PORT42_FN0,	 PORT97_FN0),	/* IRQ12A */
+	PINMUX_IRQ(evt2irq(0x03A0), PORT64_FN0,	 PORT98_FN0),	/* IRQ13A */
+	PINMUX_IRQ(evt2irq(0x03C0), PORT63_FN0,	 PORT99_FN0),	/* IRQ14A */
+	PINMUX_IRQ(evt2irq(0x03E0), PORT62_FN0,	 PORT100_FN0),	/* IRQ15A */
+	PINMUX_IRQ(evt2irq(0x3200), PORT68_FN0,	 PORT211_FN0),	/* IRQ16A */
+	PINMUX_IRQ(evt2irq(0x3220), PORT69_FN0),		/* IRQ17A */
+	PINMUX_IRQ(evt2irq(0x3240), PORT70_FN0),		/* IRQ18A */
+	PINMUX_IRQ(evt2irq(0x3260), PORT71_FN0),		/* IRQ19A */
+	PINMUX_IRQ(evt2irq(0x3280), PORT67_FN0),		/* IRQ20A */
+	PINMUX_IRQ(evt2irq(0x32A0), PORT202_FN0),		/* IRQ21A */
+	PINMUX_IRQ(evt2irq(0x32C0), PORT95_FN0),		/* IRQ22A */
+	PINMUX_IRQ(evt2irq(0x32E0), PORT96_FN0),		/* IRQ23A */
+	PINMUX_IRQ(evt2irq(0x3300), PORT180_FN0),		/* IRQ24A */
+	PINMUX_IRQ(evt2irq(0x3320), PORT38_FN0),		/* IRQ25A */
+	PINMUX_IRQ(evt2irq(0x3340), PORT58_FN0,	 PORT81_FN0),	/* IRQ26A */
+	PINMUX_IRQ(evt2irq(0x3360), PORT57_FN0,	 PORT168_FN0),	/* IRQ27A */
+	PINMUX_IRQ(evt2irq(0x3380), PORT56_FN0,	 PORT169_FN0),	/* IRQ28A */
+	PINMUX_IRQ(evt2irq(0x33A0), PORT50_FN0,	 PORT170_FN0),	/* IRQ29A */
+	PINMUX_IRQ(evt2irq(0x33C0), PORT49_FN0,	 PORT171_FN0),	/* IRQ30A */
+	PINMUX_IRQ(evt2irq(0x33E0), PORT41_FN0,	 PORT167_FN0),	/* IRQ31A */
+};
+
 static struct pinmux_info r8a7740_pinmux_info = {
 	.name		= "r8a7740_pfc",
 	.reserved_id	= PINMUX_RESERVED,
@@ -2554,6 +2590,9 @@ static struct pinmux_info r8a7740_pinmux_info = {
 
 	.gpio_data	= pinmux_data,
 	.gpio_data_size	= ARRAY_SIZE(pinmux_data),
+
+	.gpio_irq	= pinmux_irqs,
+	.gpio_irq_size	= ARRAY_SIZE(pinmux_irqs),
 };
 
 void r8a7740_pinmux_init(void)

arch/arm/mach-shmobile/setup-r8a7740.c

@@ -350,19 +350,19 @@ static void r8a7740_i2c_workaround(struct platform_device *pdev)
 	i2c_write(reg, ICSTART, i2c_read(reg, ICSTART) | 0x10);
 	i2c_read(reg, ICSTART); /* dummy read */
 
-	mdelay(100);
+	udelay(10);
 
 	i2c_write(reg, ICCR, 0x01);
-	i2c_read(reg, ICCR);
 	i2c_write(reg, ICSTART, 0x00);
-	i2c_read(reg, ICSTART);
+
+	udelay(10);
 
 	i2c_write(reg, ICCR, 0x10);
-	mdelay(100);
+	udelay(10);
 	i2c_write(reg, ICCR, 0x00);
-	mdelay(100);
+	udelay(10);
 	i2c_write(reg, ICCR, 0x10);
-	mdelay(100);
+	udelay(10);
 
 	iounmap(reg);
 }

arch/arm/mach-shmobile/setup-r8a7779.c

@@ -262,10 +262,14 @@ void __init r8a7779_add_standard_devices(void)
 			    ARRAY_SIZE(r8a7779_late_devices));
 }
 
+/* do nothing for !CONFIG_SMP or !CONFIG_HAVE_TWD */
+void __init __weak r8a7779_register_twd(void) { }
+
 static void __init r8a7779_earlytimer_init(void)
 {
 	r8a7779_clock_init();
 	shmobile_earlytimer_init();
+	r8a7779_register_twd();
 }
 
 void __init r8a7779_add_early_devices(void)

arch/arm/mach-shmobile/setup-sh7372.c

@@ -22,6 +22,7 @@
 #include <linux/interrupt.h>
 #include <linux/irq.h>
 #include <linux/platform_device.h>
+#include <linux/of_platform.h>
 #include <linux/uio_driver.h>
 #include <linux/delay.h>
 #include <linux/input.h>
@@ -460,6 +461,16 @@ static const struct sh_dmae_slave_config sh7372_dmae_slaves[] = {
 		.addr		= 0xe6870030,
 		.chcr		= DM_INC | SM_FIX | 0x800 | TS_INDEX2VAL(XMIT_SZ_16BIT),
 		.mid_rid	= 0xce,
+	}, {
+		.slave_id	= SHDMA_SLAVE_FSIA_TX,
+		.addr		= 0xfe1f0024,
+		.chcr		= DM_FIX | SM_INC | 0x800 | TS_INDEX2VAL(XMIT_SZ_32BIT),
+		.mid_rid	= 0xb1,
+	}, {
+		.slave_id	= SHDMA_SLAVE_FSIA_RX,
+		.addr		= 0xfe1f0020,
+		.chcr		= DM_INC | SM_FIX | 0x800 | TS_INDEX2VAL(XMIT_SZ_32BIT),
+		.mid_rid	= 0xb2,
 	}, {
 		.slave_id	= SHDMA_SLAVE_MMCIF_TX,
 		.addr		= 0xe6bd0034,
@@ -1092,3 +1103,50 @@ void __init sh7372_add_early_devices(void)
 	/* override timer setup with soc-specific code */
 	shmobile_timer.init = sh7372_earlytimer_init;
 }
+
+#ifdef CONFIG_USE_OF
+
+void __init sh7372_add_early_devices_dt(void)
+{
+	shmobile_setup_delay(800, 1, 3); /* Cortex-A8 @ 800MHz */
+
+	early_platform_add_devices(sh7372_early_devices,
+				   ARRAY_SIZE(sh7372_early_devices));
+
+	/* setup early console here as well */
+	shmobile_setup_console();
+}
+
+static const struct of_dev_auxdata sh7372_auxdata_lookup[] __initconst = {
+	{ }
+};
+
+void __init sh7372_add_standard_devices_dt(void)
+{
+	/* clocks are setup late during boot in the case of DT */
+	sh7372_clock_init();
+
+	platform_add_devices(sh7372_early_devices,
+			    ARRAY_SIZE(sh7372_early_devices));
+
+	of_platform_populate(NULL, of_default_bus_match_table,
+			     sh7372_auxdata_lookup, NULL);
+}
+
+static const char *sh7372_boards_compat_dt[] __initdata = {
+	"renesas,sh7372",
+	NULL,
+};
+
+DT_MACHINE_START(SH7372_DT, "Generic SH7372 (Flattened Device Tree)")
+	.map_io		= sh7372_map_io,
+	.init_early	= sh7372_add_early_devices_dt,
+	.nr_irqs	= NR_IRQS_LEGACY,
+	.init_irq	= sh7372_init_irq,
+	.handle_irq	= shmobile_handle_irq_intc,
+	.init_machine	= sh7372_add_standard_devices_dt,
+	.timer		= &shmobile_timer,
+	.dt_compat	= sh7372_boards_compat_dt,
+MACHINE_END
+
+#endif /* CONFIG_USE_OF */

arch/arm/mach-shmobile/setup-sh73a0.c

@@ -688,10 +688,14 @@ void __init sh73a0_add_standard_devices(void)
 			    ARRAY_SIZE(sh73a0_late_devices));
 }
 
+/* do nothing for !CONFIG_SMP or !CONFIG_HAVE_TWD */
+void __init __weak sh73a0_register_twd(void) { }
+
 static void __init sh73a0_earlytimer_init(void)
 {
 	sh73a0_clock_init();
 	shmobile_earlytimer_init();
+	sh73a0_register_twd();
 }
 
 void __init sh73a0_add_early_devices(void)

arch/arm/mach-shmobile/smp-r8a7779.c

@@ -64,8 +64,15 @@ static void __iomem *scu_base_addr(void)
 static DEFINE_SPINLOCK(scu_lock);
 static unsigned long tmp;
 
+#ifdef CONFIG_HAVE_ARM_TWD
 static DEFINE_TWD_LOCAL_TIMER(twd_local_timer, 0xf0000600, 29);
 
+void __init r8a7779_register_twd(void)
+{
+	twd_local_timer_register(&twd_local_timer);
+}
+#endif
+
 static void modify_scu_cpu_psr(unsigned long set, unsigned long clr)
 {
 	void __iomem *scu_base = scu_base_addr();
@@ -84,7 +91,6 @@ unsigned int __init r8a7779_get_core_count(void)
 {
 	void __iomem *scu_base = scu_base_addr();
 
-	shmobile_twd_init(&twd_local_timer);
 	return scu_get_core_count(scu_base);
 }
 

arch/arm/mach-shmobile/smp-sh73a0.c

@@ -42,7 +42,13 @@ static void __iomem *scu_base_addr(void)
 static DEFINE_SPINLOCK(scu_lock);
 static unsigned long tmp;
 
+#ifdef CONFIG_HAVE_ARM_TWD
 static DEFINE_TWD_LOCAL_TIMER(twd_local_timer, 0xf0000600, 29);
+void __init sh73a0_register_twd(void)
+{
+	twd_local_timer_register(&twd_local_timer);
+}
+#endif
 
 static void modify_scu_cpu_psr(unsigned long set, unsigned long clr)
 {
@@ -62,7 +68,6 @@ unsigned int __init sh73a0_get_core_count(void)
 {
 	void __iomem *scu_base = scu_base_addr();
 
-	shmobile_twd_init(&twd_local_timer);
 	return scu_get_core_count(scu_base);
 }
 

arch/arm/mach-shmobile/timer.c

@@ -19,9 +19,27 @@
  *
  */
 #include <linux/platform_device.h>
+#include <linux/delay.h>
 #include <asm/mach/time.h>
 #include <asm/smp_twd.h>
 
+void __init shmobile_setup_delay(unsigned int max_cpu_core_mhz,
+				 unsigned int mult, unsigned int div)
+{
+	/* calculate a worst-case loops-per-jiffy value
+	 * based on maximum cpu core mhz setting and the
+	 * __delay() implementation in arch/arm/lib/delay.S
+	 *
+	 * this will result in a longer delay than expected
+	 * when the cpu core runs on lower frequencies.
+	 */
+
+	unsigned int value = (1000000 * mult) / (HZ * div);
+
+	if (!preset_lpj)
+		preset_lpj = max_cpu_core_mhz * value;
+}
+
 static void __init shmobile_late_time_init(void)
 {
 	/*
@@ -46,15 +64,6 @@ static void __init shmobile_timer_init(void)
 {
 }
 
-void __init shmobile_twd_init(struct twd_local_timer *twd_local_timer)
-{
-#ifdef CONFIG_HAVE_ARM_TWD
-	int err = twd_local_timer_register(twd_local_timer);
-	if (err)
-		pr_err("twd_local_timer_register failed %d\n", err);
-#endif
-}
-
 struct sys_timer shmobile_timer = {
 	.init		= shmobile_timer_init,
 };

arch/arm/mm/abort-ev6.S

@@ -26,18 +26,23 @@ ENTRY(v6_early_abort)
 	mrc	p15, 0, r1, c5, c0, 0		@ get FSR
 	mrc	p15, 0, r0, c6, c0, 0		@ get FAR
 /*
- * Faulty SWP instruction on 1136 doesn't set bit 11 in DFSR (erratum 326103).
- * The test below covers all the write situations, including Java bytecodes
+ * Faulty SWP instruction on 1136 doesn't set bit 11 in DFSR.
  */
-	bic	r1, r1, #1 << 11		@ clear bit 11 of FSR
+#ifdef CONFIG_ARM_ERRATA_326103
+	ldr	ip, =0x4107b36
+	mrc	p15, 0, r3, c0, c0, 0		@ get processor id
+	teq	ip, r3, lsr #4			@ r0 ARM1136?
+	bne	do_DataAbort
 	tst	r5, #PSR_J_BIT			@ Java?
+	tsteq	r5, #PSR_T_BIT			@ Thumb?
 	bne	do_DataAbort
-	do_thumb_abort fsr=r1, pc=r4, psr=r5, tmp=r3
-	ldreq	r3, [r4]			@ read aborted ARM instruction
+	bic	r1, r1, #1 << 11		@ clear bit 11 of FSR
+	ldr	r3, [r4]			@ read aborted ARM instruction
 #ifdef CONFIG_CPU_ENDIAN_BE8
-	reveq	r3, r3
+	rev	r3, r3
 #endif
 	do_ldrd_abort tmp=ip, insn=r3
 	tst	r3, #1 << 20			@ L = 0 -> write
 	orreq	r1, r1, #1 << 11		@ yes.
+#endif
 	b	do_DataAbort

arch/arm/mm/cache-l2x0.c

@@ -32,6 +32,7 @@ static void __iomem *l2x0_base;
 static DEFINE_RAW_SPINLOCK(l2x0_lock);
 static u32 l2x0_way_mask;	/* Bitmask of active ways */
 static u32 l2x0_size;
+static unsigned long sync_reg_offset = L2X0_CACHE_SYNC;
 
 struct l2x0_regs l2x0_saved_regs;
 
@@ -61,12 +62,7 @@ static inline void cache_sync(void)
 {
 	void __iomem *base = l2x0_base;
 
-#ifdef CONFIG_PL310_ERRATA_753970
-	/* write to an unmmapped register */
-	writel_relaxed(0, base + L2X0_DUMMY_REG);
-#else
-	writel_relaxed(0, base + L2X0_CACHE_SYNC);
-#endif
+	writel_relaxed(0, base + sync_reg_offset);
 	cache_wait(base + L2X0_CACHE_SYNC, 1);
 }
 
@@ -85,10 +81,13 @@ static inline void l2x0_inv_line(unsigned long addr)
 }
 
 #if defined(CONFIG_PL310_ERRATA_588369) || defined(CONFIG_PL310_ERRATA_727915)
+static inline void debug_writel(unsigned long val)
+{
+	if (outer_cache.set_debug)
+		outer_cache.set_debug(val);
+}
 
-#define debug_writel(val)	outer_cache.set_debug(val)
-
-static void l2x0_set_debug(unsigned long val)
+static void pl310_set_debug(unsigned long val)
 {
 	writel_relaxed(val, l2x0_base + L2X0_DEBUG_CTRL);
 }
@@ -98,7 +97,7 @@ static inline void debug_writel(unsigned long val)
 {
 }
 
-#define l2x0_set_debug	NULL
+#define pl310_set_debug	NULL
 #endif
 
 #ifdef CONFIG_PL310_ERRATA_588369
@@ -331,6 +330,11 @@ void __init l2x0_init(void __iomem *base, u32 aux_val, u32 aux_mask)
 		else
 			ways = 8;
 		type = "L310";
+#ifdef CONFIG_PL310_ERRATA_753970
+		/* Unmapped register. */
+		sync_reg_offset = L2X0_DUMMY_REG;
+#endif
+		outer_cache.set_debug = pl310_set_debug;
 		break;
 	case L2X0_CACHE_ID_PART_L210:
 		ways = (aux >> 13) & 0xf;
@@ -379,7 +383,6 @@ void __init l2x0_init(void __iomem *base, u32 aux_val, u32 aux_mask)
 	outer_cache.flush_all = l2x0_flush_all;
 	outer_cache.inv_all = l2x0_inv_all;
 	outer_cache.disable = l2x0_disable;
-	outer_cache.set_debug = l2x0_set_debug;
 
 	printk(KERN_INFO "%s cache controller enabled\n", type);
 	printk(KERN_INFO "l2x0: %d ways, CACHE_ID 0x%08x, AUX_CTRL 0x%08x, Cache size: %d B\n",

arch/arm/mm/init.c

@@ -293,11 +293,11 @@ EXPORT_SYMBOL(pfn_valid);
 #endif
 
 #ifndef CONFIG_SPARSEMEM
-static void arm_memory_present(void)
+static void __init arm_memory_present(void)
 {
 }
 #else
-static void arm_memory_present(void)
+static void __init arm_memory_present(void)
 {
 	struct memblock_region *reg;
 

arch/arm/mm/mmu.c

@@ -618,8 +618,8 @@ static void __init alloc_init_section(pud_t *pud, unsigned long addr,
 	}
 }
 
-static void alloc_init_pud(pgd_t *pgd, unsigned long addr, unsigned long end,
-	unsigned long phys, const struct mem_type *type)
+static void __init alloc_init_pud(pgd_t *pgd, unsigned long addr,
+	unsigned long end, unsigned long phys, const struct mem_type *type)
 {
 	pud_t *pud = pud_offset(pgd, addr);
 	unsigned long next;

arch/arm/plat-omap/dma.c

@@ -916,6 +916,13 @@ void omap_start_dma(int lch)
 			l |= OMAP_DMA_CCR_BUFFERING_DISABLE;
 	l |= OMAP_DMA_CCR_EN;
 
+	/*
+	 * As dma_write() uses IO accessors which are weakly ordered, there
+	 * is no guarantee that data in coherent DMA memory will be visible
+	 * to the DMA device.  Add a memory barrier here to ensure that any
+	 * such data is visible prior to enabling DMA.
+	 */
+	mb();
 	p->dma_write(l, CCR, lch);
 
 	dma_chan[lch].flags |= OMAP_DMA_ACTIVE;
@@ -965,6 +972,13 @@ void omap_stop_dma(int lch)
 		p->dma_write(l, CCR, lch);
 	}
 
+	/*
+	 * Ensure that data transferred by DMA is visible to any access
+	 * after DMA has been disabled.  This is important for coherent
+	 * DMA regions.
+	 */
+	mb();
+
 	if (!omap_dma_in_1510_mode() && dma_chan[lch].next_lch != -1) {
 		int next_lch, cur_lch = lch;
 		char dma_chan_link_map[dma_lch_count];

arch/arm/vfp/vfpmodule.c

@@ -17,6 +17,8 @@
 #include <linux/sched.h>
 #include <linux/smp.h>
 #include <linux/init.h>
+#include <linux/uaccess.h>
+#include <linux/user.h>
 
 #include <asm/cp15.h>
 #include <asm/cputype.h>
@@ -528,6 +530,103 @@ void vfp_flush_hwstate(struct thread_info *thread)
 	put_cpu();
 }
 
+/*
+ * Save the current VFP state into the provided structures and prepare
+ * for entry into a new function (signal handler).
+ */
+int vfp_preserve_user_clear_hwstate(struct user_vfp __user *ufp,
+				    struct user_vfp_exc __user *ufp_exc)
+{
+	struct thread_info *thread = current_thread_info();
+	struct vfp_hard_struct *hwstate = &thread->vfpstate.hard;
+	int err = 0;
+
+	/* Ensure that the saved hwstate is up-to-date. */
+	vfp_sync_hwstate(thread);
+
+	/*
+	 * Copy the floating point registers. There can be unused
+	 * registers see asm/hwcap.h for details.
+	 */
+	err |= __copy_to_user(&ufp->fpregs, &hwstate->fpregs,
+			      sizeof(hwstate->fpregs));
+	/*
+	 * Copy the status and control register.
+	 */
+	__put_user_error(hwstate->fpscr, &ufp->fpscr, err);
+
+	/*
+	 * Copy the exception registers.
+	 */
+	__put_user_error(hwstate->fpexc, &ufp_exc->fpexc, err);
+	__put_user_error(hwstate->fpinst, &ufp_exc->fpinst, err);
+	__put_user_error(hwstate->fpinst2, &ufp_exc->fpinst2, err);
+
+	if (err)
+		return -EFAULT;
+
+	/* Ensure that VFP is disabled. */
+	vfp_flush_hwstate(thread);
+
+	/*
+	 * As per the PCS, clear the length and stride bits for function
+	 * entry.
+	 */
+	hwstate->fpscr &= ~(FPSCR_LENGTH_MASK | FPSCR_STRIDE_MASK);
+
+	/*
+	 * Disable VFP in the hwstate so that we can detect if it gets
+	 * used.
+	 */
+	hwstate->fpexc &= ~FPEXC_EN;
+	return 0;
+}
+
+/* Sanitise and restore the current VFP state from the provided structures. */
+int vfp_restore_user_hwstate(struct user_vfp __user *ufp,
+			     struct user_vfp_exc __user *ufp_exc)
+{
+	struct thread_info *thread = current_thread_info();
+	struct vfp_hard_struct *hwstate = &thread->vfpstate.hard;
+	unsigned long fpexc;
+	int err = 0;
+
+	/*
+	 * If VFP has been used, then disable it to avoid corrupting
+	 * the new thread state.
+	 */
+	if (hwstate->fpexc & FPEXC_EN)
+		vfp_flush_hwstate(thread);
+
+	/*
+	 * Copy the floating point registers. There can be unused
+	 * registers see asm/hwcap.h for details.
+	 */
+	err |= __copy_from_user(&hwstate->fpregs, &ufp->fpregs,
+				sizeof(hwstate->fpregs));
+	/*
+	 * Copy the status and control register.
+	 */
+	__get_user_error(hwstate->fpscr, &ufp->fpscr, err);
+
+	/*
+	 * Sanitise and restore the exception registers.
+	 */
+	__get_user_error(fpexc, &ufp_exc->fpexc, err);
+
+	/* Ensure the VFP is enabled. */
+	fpexc |= FPEXC_EN;
+
+	/* Ensure FPINST2 is invalid and the exception flag is cleared. */
+	fpexc &= ~(FPEXC_EX | FPEXC_FP2V);
+	hwstate->fpexc = fpexc;
+
+	__get_user_error(hwstate->fpinst, &ufp_exc->fpinst, err);
+	__get_user_error(hwstate->fpinst2, &ufp_exc->fpinst2, err);
+
+	return err ? -EFAULT : 0;
+}
+
 /*
  * VFP hardware can lose all context when a CPU goes offline.
  * As we will be running in SMP mode with CPU hotplug, we will save the

arch/mips/ath79/dev-wmac.c

@@ -58,8 +58,8 @@ static void __init ar913x_wmac_setup(void)
 
 static int ar933x_wmac_reset(void)
 {
-	ath79_device_reset_clear(AR933X_RESET_WMAC);
 	ath79_device_reset_set(AR933X_RESET_WMAC);
+	ath79_device_reset_clear(AR933X_RESET_WMAC);
 
 	return 0;
 }

arch/mips/include/asm/mach-jz4740/irq.h

@@ -45,7 +45,7 @@
 #define JZ4740_IRQ_LCD		JZ4740_IRQ(30)
 
 /* 2nd-level interrupts */
-#define JZ4740_IRQ_DMA(x)	(JZ4740_IRQ(32) + (X))
+#define JZ4740_IRQ_DMA(x)	(JZ4740_IRQ(32) + (x))
 
 #define JZ4740_IRQ_INTC_GPIO(x) (JZ4740_IRQ_GPIO0 - (x))
 #define JZ4740_IRQ_GPIO(x)	(JZ4740_IRQ(48) + (x))

arch/mips/include/asm/mmu_context.h

@@ -37,12 +37,6 @@ extern void tlbmiss_handler_setup_pgd(unsigned long pgd);
 		write_c0_xcontext((unsigned long) smp_processor_id() << 51); \
 	} while (0)
 
-
-static inline unsigned long get_current_pgd(void)
-{
-	return PHYS_TO_XKSEG_CACHED((read_c0_context() >> 11) & ~0xfffUL);
-}
-
 #else /* CONFIG_MIPS_PGD_C0_CONTEXT: using  pgd_current*/
 
 /*

arch/mips/kernel/signal.c

@@ -257,11 +257,8 @@ asmlinkage int sys_sigsuspend(nabi_no_regargs struct pt_regs regs)
 		return -EFAULT;
 	sigdelsetmask(&newset, ~_BLOCKABLE);
 
-	spin_lock_irq(&current->sighand->siglock);
 	current->saved_sigmask = current->blocked;
-	current->blocked = newset;
-	recalc_sigpending();
-	spin_unlock_irq(&current->sighand->siglock);
+	set_current_blocked(&newset);
 
 	current->state = TASK_INTERRUPTIBLE;
 	schedule();
@@ -286,11 +283,8 @@ asmlinkage int sys_rt_sigsuspend(nabi_no_regargs struct pt_regs regs)
 		return -EFAULT;
 	sigdelsetmask(&newset, ~_BLOCKABLE);
 
-	spin_lock_irq(&current->sighand->siglock);
 	current->saved_sigmask = current->blocked;
-	current->blocked = newset;
-	recalc_sigpending();
-	spin_unlock_irq(&current->sighand->siglock);
+	set_current_blocked(&newset);
 
 	current->state = TASK_INTERRUPTIBLE;
 	schedule();
@@ -362,10 +356,7 @@ asmlinkage void sys_sigreturn(nabi_no_regargs struct pt_regs regs)
 		goto badframe;
 
 	sigdelsetmask(&blocked, ~_BLOCKABLE);
-	spin_lock_irq(&current->sighand->siglock);
-	current->blocked = blocked;
-	recalc_sigpending();
-	spin_unlock_irq(&current->sighand->siglock);
+	set_current_blocked(&blocked);
 
 	sig = restore_sigcontext(&regs, &frame->sf_sc);
 	if (sig < 0)
@@ -401,10 +392,7 @@ asmlinkage void sys_rt_sigreturn(nabi_no_regargs struct pt_regs regs)
 		goto badframe;
 
 	sigdelsetmask(&set, ~_BLOCKABLE);
-	spin_lock_irq(&current->sighand->siglock);
-	current->blocked = set;
-	recalc_sigpending();
-	spin_unlock_irq(&current->sighand->siglock);
+	set_current_blocked(&set);
 
 	sig = restore_sigcontext(&regs, &frame->rs_uc.uc_mcontext);
 	if (sig < 0)
@@ -580,12 +568,7 @@ static int handle_signal(unsigned long sig, siginfo_t *info,
 	if (ret)
 		return ret;
 
-	spin_lock_irq(&current->sighand->siglock);
-	sigorsets(&current->blocked, &current->blocked, &ka->sa.sa_mask);
-	if (!(ka->sa.sa_flags & SA_NODEFER))
-		sigaddset(&current->blocked, sig);
-	recalc_sigpending();
-	spin_unlock_irq(&current->sighand->siglock);
+	block_sigmask(ka, sig);
 
 	return ret;
 }

arch/mips/kernel/signal32.c

@@ -290,11 +290,8 @@ asmlinkage int sys32_sigsuspend(nabi_no_regargs struct pt_regs regs)
 		return -EFAULT;
 	sigdelsetmask(&newset, ~_BLOCKABLE);
 
-	spin_lock_irq(&current->sighand->siglock);
 	current->saved_sigmask = current->blocked;
-	current->blocked = newset;
-	recalc_sigpending();
-	spin_unlock_irq(&current->sighand->siglock);
+	set_current_blocked(&newset);
 
 	current->state = TASK_INTERRUPTIBLE;
 	schedule();
@@ -318,11 +315,8 @@ asmlinkage int sys32_rt_sigsuspend(nabi_no_regargs struct pt_regs regs)
 		return -EFAULT;
 	sigdelsetmask(&newset, ~_BLOCKABLE);
 
-	spin_lock_irq(&current->sighand->siglock);
 	current->saved_sigmask = current->blocked;
-	current->blocked = newset;
-	recalc_sigpending();
-	spin_unlock_irq(&current->sighand->siglock);
+	set_current_blocked(&newset);
 
 	current->state = TASK_INTERRUPTIBLE;
 	schedule();
@@ -488,10 +482,7 @@ asmlinkage void sys32_sigreturn(nabi_no_regargs struct pt_regs regs)
 		goto badframe;
 
 	sigdelsetmask(&blocked, ~_BLOCKABLE);
-	spin_lock_irq(&current->sighand->siglock);
-	current->blocked = blocked;
-	recalc_sigpending();
-	spin_unlock_irq(&current->sighand->siglock);
+	set_current_blocked(&blocked);
 
 	sig = restore_sigcontext32(&regs, &frame->sf_sc);
 	if (sig < 0)
@@ -529,10 +520,7 @@ asmlinkage void sys32_rt_sigreturn(nabi_no_regargs struct pt_regs regs)
 		goto badframe;
 
 	sigdelsetmask(&set, ~_BLOCKABLE);
-	spin_lock_irq(&current->sighand->siglock);
-	current->blocked = set;
-	recalc_sigpending();
-	spin_unlock_irq(&current->sighand->siglock);
+	set_current_blocked(&set);
 
 	sig = restore_sigcontext32(&regs, &frame->rs_uc.uc_mcontext);
 	if (sig < 0)

arch/mips/kernel/signal_n32.c

@@ -93,11 +93,8 @@ asmlinkage int sysn32_rt_sigsuspend(nabi_no_regargs struct pt_regs regs)
 	sigset_from_compat(&newset, &uset);
 	sigdelsetmask(&newset, ~_BLOCKABLE);
 
-	spin_lock_irq(&current->sighand->siglock);
 	current->saved_sigmask = current->blocked;
-	current->blocked = newset;
-	recalc_sigpending();
-	spin_unlock_irq(&current->sighand->siglock);
+	set_current_blocked(&newset);
 
 	current->state = TASK_INTERRUPTIBLE;
 	schedule();
@@ -121,10 +118,7 @@ asmlinkage void sysn32_rt_sigreturn(nabi_no_regargs struct pt_regs regs)
 		goto badframe;
 
 	sigdelsetmask(&set, ~_BLOCKABLE);
-	spin_lock_irq(&current->sighand->siglock);
-	current->blocked = set;
-	recalc_sigpending();
-	spin_unlock_irq(&current->sighand->siglock);
+	set_current_blocked(&set);
 
 	sig = restore_sigcontext(&regs, &frame->rs_uc.uc_mcontext);
 	if (sig < 0)

arch/parisc/kernel/pdc_cons.c

@@ -104,7 +104,7 @@ static int pdc_console_tty_open(struct tty_struct *tty, struct file *filp)
 
 static void pdc_console_tty_close(struct tty_struct *tty, struct file *filp)
 {
-	if (!tty->count) {
+	if (tty->count == 1) {
 		del_timer_sync(&pdc_console_timer);
 		tty_port_tty_set(&tty_port, NULL);
 	}

arch/powerpc/include/asm/irq.h

@@ -18,10 +18,6 @@
 #include <linux/atomic.h>
 
 
-/* Define a way to iterate across irqs. */
-#define for_each_irq(i) \
-	for ((i) = 0; (i) < NR_IRQS; ++(i))
-
 extern atomic_t ppc_n_lost_interrupts;
 
 /* This number is used when no interrupt has been assigned */

arch/powerpc/kernel/irq.c

@@ -330,14 +330,10 @@ void migrate_irqs(void)
 
 	alloc_cpumask_var(&mask, GFP_KERNEL);
 
-	for_each_irq(irq) {
+	for_each_irq_desc(irq, desc) {
 		struct irq_data *data;
 		struct irq_chip *chip;
 
-		desc = irq_to_desc(irq);
-		if (!desc)
-			continue;
-
 		data = irq_desc_get_irq_data(desc);
 		if (irqd_is_per_cpu(data))
 			continue;

arch/powerpc/kernel/machine_kexec.c

@@ -23,14 +23,11 @@
 
 void machine_kexec_mask_interrupts(void) {
 	unsigned int i;
+	struct irq_desc *desc;
 
-	for_each_irq(i) {
-		struct irq_desc *desc = irq_to_desc(i);
+	for_each_irq_desc(i, desc) {
 		struct irq_chip *chip;
 
-		if (!desc)
-			continue;
-
 		chip = irq_desc_get_chip(desc);
 		if (!chip)
 			continue;

arch/powerpc/net/bpf_jit.h

@@ -48,7 +48,13 @@
 /*
  * Assembly helpers from arch/powerpc/net/bpf_jit.S:
  */
-extern u8 sk_load_word[], sk_load_half[], sk_load_byte[], sk_load_byte_msh[];
+#define DECLARE_LOAD_FUNC(func)	\
+	extern u8 func[], func##_negative_offset[], func##_positive_offset[]
+
+DECLARE_LOAD_FUNC(sk_load_word);
+DECLARE_LOAD_FUNC(sk_load_half);
+DECLARE_LOAD_FUNC(sk_load_byte);
+DECLARE_LOAD_FUNC(sk_load_byte_msh);
 
 #define FUNCTION_DESCR_SIZE	24
 

arch/powerpc/net/bpf_jit_64.S

@@ -31,14 +31,13 @@
  * then branch directly to slow_path_XXX if required.  (In fact, could
  * load a spare GPR with the address of slow_path_generic and pass size
  * as an argument, making the call site a mtlr, li and bllr.)
- *
- * Technically, the "is addr < 0" check is unnecessary & slowing down
- * the ABS path, as it's statically checked on generation.
  */
 	.globl	sk_load_word
 sk_load_word:
 	cmpdi	r_addr, 0
-	blt	bpf_error
+	blt	bpf_slow_path_word_neg
+	.globl	sk_load_word_positive_offset
+sk_load_word_positive_offset:
 	/* Are we accessing past headlen? */
 	subi	r_scratch1, r_HL, 4
 	cmpd	r_scratch1, r_addr
@@ -51,7 +50,9 @@ sk_load_word:
 	.globl	sk_load_half
 sk_load_half:
 	cmpdi	r_addr, 0
-	blt	bpf_error
+	blt	bpf_slow_path_half_neg
+	.globl	sk_load_half_positive_offset
+sk_load_half_positive_offset:
 	subi	r_scratch1, r_HL, 2
 	cmpd	r_scratch1, r_addr
 	blt	bpf_slow_path_half
@@ -61,7 +62,9 @@ sk_load_half:
 	.globl	sk_load_byte
 sk_load_byte:
 	cmpdi	r_addr, 0
-	blt	bpf_error
+	blt	bpf_slow_path_byte_neg
+	.globl	sk_load_byte_positive_offset
+sk_load_byte_positive_offset:
 	cmpd	r_HL, r_addr
 	ble	bpf_slow_path_byte
 	lbzx	r_A, r_D, r_addr
@@ -69,22 +72,20 @@ sk_load_byte:
 
 /*
  * BPF_S_LDX_B_MSH: ldxb  4*([offset]&0xf)
- * r_addr is the offset value, already known positive
+ * r_addr is the offset value
  */
 	.globl sk_load_byte_msh
 sk_load_byte_msh:
+	cmpdi	r_addr, 0
+	blt	bpf_slow_path_byte_msh_neg
+	.globl sk_load_byte_msh_positive_offset
+sk_load_byte_msh_positive_offset:
 	cmpd	r_HL, r_addr
 	ble	bpf_slow_path_byte_msh
 	lbzx	r_X, r_D, r_addr
 	rlwinm	r_X, r_X, 2, 32-4-2, 31-2
 	blr
 
-bpf_error:
-	/* Entered with cr0 = lt */
-	li	r3, 0
-	/* Generated code will 'blt epilogue', returning 0. */
-	blr
-
 /* Call out to skb_copy_bits:
  * We'll need to back up our volatile regs first; we have
  * local variable space at r1+(BPF_PPC_STACK_BASIC).
@@ -136,3 +137,84 @@ bpf_slow_path_byte_msh:
 	lbz	r_X, BPF_PPC_STACK_BASIC+(2*8)(r1)
 	rlwinm	r_X, r_X, 2, 32-4-2, 31-2
 	blr
+
+/* Call out to bpf_internal_load_pointer_neg_helper:
+ * We'll need to back up our volatile regs first; we have
+ * local variable space at r1+(BPF_PPC_STACK_BASIC).
+ * Allocate a new stack frame here to remain ABI-compliant in
+ * stashing LR.
+ */
+#define sk_negative_common(SIZE)				\
+	mflr	r0;						\
+	std	r0, 16(r1);					\
+	/* R3 goes in parameter space of caller's frame */	\
+	std	r_skb, (BPF_PPC_STACKFRAME+48)(r1);		\
+	std	r_A, (BPF_PPC_STACK_BASIC+(0*8))(r1);		\
+	std	r_X, (BPF_PPC_STACK_BASIC+(1*8))(r1);		\
+	stdu	r1, -BPF_PPC_SLOWPATH_FRAME(r1);		\
+	/* R3 = r_skb, as passed */				\
+	mr	r4, r_addr;					\
+	li	r5, SIZE;					\
+	bl	bpf_internal_load_pointer_neg_helper;		\
+	/* R3 != 0 on success */				\
+	addi	r1, r1, BPF_PPC_SLOWPATH_FRAME;			\
+	ld	r0, 16(r1);					\
+	ld	r_A, (BPF_PPC_STACK_BASIC+(0*8))(r1);		\
+	ld	r_X, (BPF_PPC_STACK_BASIC+(1*8))(r1);		\
+	mtlr	r0;						\
+	cmpldi	r3, 0;						\
+	beq	bpf_error_slow;	/* cr0 = EQ */			\
+	mr	r_addr, r3;					\
+	ld	r_skb, (BPF_PPC_STACKFRAME+48)(r1);		\
+	/* Great success! */
+
+bpf_slow_path_word_neg:
+	lis     r_scratch1,-32	/* SKF_LL_OFF */
+	cmpd	r_addr, r_scratch1	/* addr < SKF_* */
+	blt	bpf_error	/* cr0 = LT */
+	.globl	sk_load_word_negative_offset
+sk_load_word_negative_offset:
+	sk_negative_common(4)
+	lwz	r_A, 0(r_addr)
+	blr
+
+bpf_slow_path_half_neg:
+	lis     r_scratch1,-32	/* SKF_LL_OFF */
+	cmpd	r_addr, r_scratch1	/* addr < SKF_* */
+	blt	bpf_error	/* cr0 = LT */
+	.globl	sk_load_half_negative_offset
+sk_load_half_negative_offset:
+	sk_negative_common(2)
+	lhz	r_A, 0(r_addr)
+	blr
+
+bpf_slow_path_byte_neg:
+	lis     r_scratch1,-32	/* SKF_LL_OFF */
+	cmpd	r_addr, r_scratch1	/* addr < SKF_* */
+	blt	bpf_error	/* cr0 = LT */
+	.globl	sk_load_byte_negative_offset
+sk_load_byte_negative_offset:
+	sk_negative_common(1)
+	lbz	r_A, 0(r_addr)
+	blr
+
+bpf_slow_path_byte_msh_neg:
+	lis     r_scratch1,-32	/* SKF_LL_OFF */
+	cmpd	r_addr, r_scratch1	/* addr < SKF_* */
+	blt	bpf_error	/* cr0 = LT */
+	.globl	sk_load_byte_msh_negative_offset
+sk_load_byte_msh_negative_offset:
+	sk_negative_common(1)
+	lbz	r_X, 0(r_addr)
+	rlwinm	r_X, r_X, 2, 32-4-2, 31-2
+	blr
+
+bpf_error_slow:
+	/* fabricate a cr0 = lt */
+	li	r_scratch1, -1
+	cmpdi	r_scratch1, 0
+bpf_error:
+	/* Entered with cr0 = lt */
+	li	r3, 0
+	/* Generated code will 'blt epilogue', returning 0. */
+	blr

arch/powerpc/net/bpf_jit_comp.c

@@ -127,6 +127,9 @@ static void bpf_jit_build_epilogue(u32 *image, struct codegen_context *ctx)
 	PPC_BLR();
 }
 
+#define CHOOSE_LOAD_FUNC(K, func) \
+	((int)K < 0 ? ((int)K >= SKF_LL_OFF ? func##_negative_offset : func) : func##_positive_offset)
+
 /* Assemble the body code between the prologue & epilogue. */
 static int bpf_jit_build_body(struct sk_filter *fp, u32 *image,
 			      struct codegen_context *ctx,
@@ -391,21 +394,16 @@ static int bpf_jit_build_body(struct sk_filter *fp, u32 *image,
 
 			/*** Absolute loads from packet header/data ***/
 		case BPF_S_LD_W_ABS:
-			func = sk_load_word;
+			func = CHOOSE_LOAD_FUNC(K, sk_load_word);
 			goto common_load;
 		case BPF_S_LD_H_ABS:
-			func = sk_load_half;
+			func = CHOOSE_LOAD_FUNC(K, sk_load_half);
 			goto common_load;
 		case BPF_S_LD_B_ABS:
-			func = sk_load_byte;
+			func = CHOOSE_LOAD_FUNC(K, sk_load_byte);
 		common_load:
-			/*
-			 * Load from [K].  Reference with the (negative)
-			 * SKF_NET_OFF/SKF_LL_OFF offsets is unsupported.
-			 */
+			/* Load from [K]. */
 			ctx->seen |= SEEN_DATAREF;
-			if ((int)K < 0)
-				return -ENOTSUPP;
 			PPC_LI64(r_scratch1, func);
 			PPC_MTLR(r_scratch1);
 			PPC_LI32(r_addr, K);
@@ -429,7 +427,7 @@ static int bpf_jit_build_body(struct sk_filter *fp, u32 *image,
 		common_load_ind:
 			/*
 			 * Load from [X + K].  Negative offsets are tested for
-			 * in the helper functions, and result in a 'ret 0'.
+			 * in the helper functions.
 			 */
 			ctx->seen |= SEEN_DATAREF | SEEN_XREG;
 			PPC_LI64(r_scratch1, func);
@@ -443,13 +441,7 @@ static int bpf_jit_build_body(struct sk_filter *fp, u32 *image,
 			break;
 
 		case BPF_S_LDX_B_MSH:
-			/*
-			 * x86 version drops packet (RET 0) when K<0, whereas
-			 * interpreter does allow K<0 (__load_pointer, special
-			 * ancillary data).  common_load returns ENOTSUPP if K<0,
-			 * so we fall back to interpreter & filter works.
-			 */
-			func = sk_load_byte_msh;
+			func = CHOOSE_LOAD_FUNC(K, sk_load_byte_msh);
 			goto common_load;
 			break;
 

arch/powerpc/platforms/cell/axon_msi.c

@@ -114,7 +114,7 @@ static void axon_msi_cascade(unsigned int irq, struct irq_desc *desc)
 		pr_devel("axon_msi: woff %x roff %x msi %x\n",
 			  write_offset, msic->read_offset, msi);
 
-		if (msi < NR_IRQS && irq_get_chip_data(msi) == msic) {
+		if (msi < nr_irqs && irq_get_chip_data(msi) == msic) {
 			generic_handle_irq(msi);
 			msic->fifo_virt[idx] = cpu_to_le32(0xffffffff);
 		} else {
@@ -276,9 +276,6 @@ static int axon_msi_setup_msi_irqs(struct pci_dev *dev, int nvec, int type)
 	if (rc)
 		return rc;
 
-	/* We rely on being able to stash a virq in a u16 */
-	BUILD_BUG_ON(NR_IRQS > 65536);
-
 	list_for_each_entry(entry, &dev->msi_list, list) {
 		virq = irq_create_direct_mapping(msic->irq_domain);
 		if (virq == NO_IRQ) {
@@ -392,7 +389,8 @@ static int axon_msi_probe(struct platform_device *device)
 	}
 	memset(msic->fifo_virt, 0xff, MSIC_FIFO_SIZE_BYTES);
 
-	msic->irq_domain = irq_domain_add_nomap(dn, 0, &msic_host_ops, msic);
+	/* We rely on being able to stash a virq in a u16, so limit irqs to < 65536 */
+	msic->irq_domain = irq_domain_add_nomap(dn, 65536, &msic_host_ops, msic);
 	if (!msic->irq_domain) {
 		printk(KERN_ERR "axon_msi: couldn't allocate irq_domain for %s\n",
 		       dn->full_name);

arch/powerpc/platforms/cell/beat_interrupt.c

@@ -248,6 +248,6 @@ void beatic_deinit_IRQ(void)
 {
 	int	i;
 
-	for (i = 1; i < NR_IRQS; i++)
+	for (i = 1; i < nr_irqs; i++)
 		beat_destruct_irq_plug(i);
 }

arch/powerpc/platforms/powermac/pic.c

@@ -57,9 +57,9 @@ static int max_real_irqs;
 
 static DEFINE_RAW_SPINLOCK(pmac_pic_lock);
 
-#define NR_MASK_WORDS	((NR_IRQS + 31) / 32)
-static unsigned long ppc_lost_interrupts[NR_MASK_WORDS];
-static unsigned long ppc_cached_irq_mask[NR_MASK_WORDS];
+/* The max irq number this driver deals with is 128; see max_irqs */
+static DECLARE_BITMAP(ppc_lost_interrupts, 128);
+static DECLARE_BITMAP(ppc_cached_irq_mask, 128);
 static int pmac_irq_cascade = -1;
 static struct irq_domain *pmac_pic_host;
 

arch/powerpc/platforms/pseries/Kconfig

@@ -30,9 +30,9 @@ config PPC_SPLPAR
 	  two or more partitions.
 
 config EEH
-	bool "PCI Extended Error Handling (EEH)" if EXPERT
+	bool
 	depends on PPC_PSERIES && PCI
-	default y if !EXPERT
+	default y
 
 config PSERIES_MSI
        bool

arch/powerpc/sysdev/cpm2_pic.c

@@ -51,8 +51,7 @@
 static intctl_cpm2_t __iomem *cpm2_intctl;
 
 static struct irq_domain *cpm2_pic_host;
-#define NR_MASK_WORDS   ((NR_IRQS + 31) / 32)
-static unsigned long ppc_cached_irq_mask[NR_MASK_WORDS];
+static unsigned long ppc_cached_irq_mask[2]; /* 2 32-bit registers */
 
 static const u_char irq_to_siureg[] = {
 	1, 1, 1, 1, 1, 1, 1, 1,

arch/powerpc/sysdev/mpc8xx_pic.c

@@ -18,69 +18,45 @@
 extern int cpm_get_irq(struct pt_regs *regs);
 
 static struct irq_domain *mpc8xx_pic_host;
-#define NR_MASK_WORDS   ((NR_IRQS + 31) / 32)
-static unsigned long ppc_cached_irq_mask[NR_MASK_WORDS];
+static unsigned long mpc8xx_cached_irq_mask;
 static sysconf8xx_t __iomem *siu_reg;
 
-int cpm_get_irq(struct pt_regs *regs);
+static inline unsigned long mpc8xx_irqd_to_bit(struct irq_data *d)
+{
+	return 0x80000000 >> irqd_to_hwirq(d);
+}
 
 static void mpc8xx_unmask_irq(struct irq_data *d)
 {
-	int	bit, word;
-	unsigned int irq_nr = (unsigned int)irqd_to_hwirq(d);
-
-	bit = irq_nr & 0x1f;
-	word = irq_nr >> 5;
-
-	ppc_cached_irq_mask[word] |= (1 << (31-bit));
-	out_be32(&siu_reg->sc_simask, ppc_cached_irq_mask[word]);
+	mpc8xx_cached_irq_mask |= mpc8xx_irqd_to_bit(d);
+	out_be32(&siu_reg->sc_simask, mpc8xx_cached_irq_mask);
 }
 
 static void mpc8xx_mask_irq(struct irq_data *d)
 {
-	int	bit, word;
-	unsigned int irq_nr = (unsigned int)irqd_to_hwirq(d);
-
-	bit = irq_nr & 0x1f;
-	word = irq_nr >> 5;
-
-	ppc_cached_irq_mask[word] &= ~(1 << (31-bit));
-	out_be32(&siu_reg->sc_simask, ppc_cached_irq_mask[word]);
+	mpc8xx_cached_irq_mask &= ~mpc8xx_irqd_to_bit(d);
+	out_be32(&siu_reg->sc_simask, mpc8xx_cached_irq_mask);
 }
 
 static void mpc8xx_ack(struct irq_data *d)
 {
-	int	bit;
-	unsigned int irq_nr = (unsigned int)irqd_to_hwirq(d);
-
-	bit = irq_nr & 0x1f;
-	out_be32(&siu_reg->sc_sipend, 1 << (31-bit));
+	out_be32(&siu_reg->sc_sipend, mpc8xx_irqd_to_bit(d));
 }
 
 static void mpc8xx_end_irq(struct irq_data *d)
 {
-	int bit, word;
-	unsigned int irq_nr = (unsigned int)irqd_to_hwirq(d);
-
-	bit = irq_nr & 0x1f;
-	word = irq_nr >> 5;
-
-	ppc_cached_irq_mask[word] |= (1 << (31-bit));
-	out_be32(&siu_reg->sc_simask, ppc_cached_irq_mask[word]);
+	mpc8xx_cached_irq_mask |= mpc8xx_irqd_to_bit(d);
+	out_be32(&siu_reg->sc_simask, mpc8xx_cached_irq_mask);
 }
 
 static int mpc8xx_set_irq_type(struct irq_data *d, unsigned int flow_type)
 {
-	if (flow_type & IRQ_TYPE_EDGE_FALLING) {
-		irq_hw_number_t hw = (unsigned int)irqd_to_hwirq(d);
+	/* only external IRQ senses are programmable */
+	if ((flow_type & IRQ_TYPE_EDGE_FALLING) && !(irqd_to_hwirq(d) & 1)) {
 		unsigned int siel = in_be32(&siu_reg->sc_siel);
-
-		/* only external IRQ senses are programmable */
-		if ((hw & 1) == 0) {
-			siel |= (0x80000000 >> hw);
-			out_be32(&siu_reg->sc_siel, siel);
-			__irq_set_handler_locked(d->irq, handle_edge_irq);
-		}
+		siel |= mpc8xx_irqd_to_bit(d);
+		out_be32(&siu_reg->sc_siel, siel);
+		__irq_set_handler_locked(d->irq, handle_edge_irq);
 	}
 	return 0;
 }
@@ -132,6 +108,9 @@ static int mpc8xx_pic_host_xlate(struct irq_domain *h, struct device_node *ct,
 		IRQ_TYPE_EDGE_FALLING,
 	};
 
+	if (intspec[0] > 0x1f)
+		return 0;
+
 	*out_hwirq = intspec[0];
 	if (intsize > 1 && intspec[1] < 4)
 		*out_flags = map_pic_senses[intspec[1]];

arch/powerpc/sysdev/xics/xics-common.c

@@ -188,6 +188,7 @@ void xics_migrate_irqs_away(void)
 {
 	int cpu = smp_processor_id(), hw_cpu = hard_smp_processor_id();
 	unsigned int irq, virq;
+	struct irq_desc *desc;
 
 	/* If we used to be the default server, move to the new "boot_cpuid" */
 	if (hw_cpu == xics_default_server)
@@ -202,8 +203,7 @@ void xics_migrate_irqs_away(void)
 	/* Allow IPIs again... */
 	icp_ops->set_priority(DEFAULT_PRIORITY);
 
-	for_each_irq(virq) {
-		struct irq_desc *desc;
+	for_each_irq_desc(virq, desc) {
 		struct irq_chip *chip;
 		long server;
 		unsigned long flags;
@@ -212,9 +212,8 @@ void xics_migrate_irqs_away(void)
 		/* We can't set affinity on ISA interrupts */
 		if (virq < NUM_ISA_INTERRUPTS)
 			continue;
-		desc = irq_to_desc(virq);
 		/* We only need to migrate enabled IRQS */
-		if (!desc || !desc->action)
+		if (!desc->action)
 			continue;
 		if (desc->irq_data.domain != xics_host)
 			continue;

arch/x86/Kconfig

@@ -81,7 +81,7 @@ config X86
 	select CLKEVT_I8253
 	select ARCH_HAVE_NMI_SAFE_CMPXCHG
 	select GENERIC_IOMAP
-	select DCACHE_WORD_ACCESS if !DEBUG_PAGEALLOC
+	select DCACHE_WORD_ACCESS
 
 config INSTRUCTION_DECODER
 	def_bool (KPROBES || PERF_EVENTS)

arch/x86/boot/compressed/relocs.c

@@ -403,13 +403,11 @@ static void print_absolute_symbols(void)
 	for (i = 0; i < ehdr.e_shnum; i++) {
 		struct section *sec = &secs[i];
 		char *sym_strtab;
-		Elf32_Sym *sh_symtab;
 		int j;
 
 		if (sec->shdr.sh_type != SHT_SYMTAB) {
 			continue;
 		}
-		sh_symtab = sec->symtab;
 		sym_strtab = sec->link->strtab;
 		for (j = 0; j < sec->shdr.sh_size/sizeof(Elf32_Sym); j++) {
 			Elf32_Sym *sym;

arch/x86/ia32/ia32_aout.c

@@ -294,8 +294,7 @@ static int load_aout_binary(struct linux_binprm *bprm, struct pt_regs *regs)
 
 	/* OK, This is the point of no return */
 	set_personality(PER_LINUX);
-	set_thread_flag(TIF_IA32);
-	current->mm->context.ia32_compat = 1;
+	set_personality_ia32(false);
 
 	setup_new_exec(bprm);
 

arch/x86/include/asm/word-at-a-time.h

@@ -43,4 +43,37 @@ static inline unsigned long has_zero(unsigned long a)
 	return ((a - REPEAT_BYTE(0x01)) & ~a) & REPEAT_BYTE(0x80);
 }
 
+/*
+ * Load an unaligned word from kernel space.
+ *
+ * In the (very unlikely) case of the word being a page-crosser
+ * and the next page not being mapped, take the exception and
+ * return zeroes in the non-existing part.
+ */
+static inline unsigned long load_unaligned_zeropad(const void *addr)
+{
+	unsigned long ret, dummy;
+
+	asm(
+		"1:\tmov %2,%0\n"
+		"2:\n"
+		".section .fixup,\"ax\"\n"
+		"3:\t"
+		"lea %2,%1\n\t"
+		"and %3,%1\n\t"
+		"mov (%1),%0\n\t"
+		"leal %2,%%ecx\n\t"
+		"andl %4,%%ecx\n\t"
+		"shll $3,%%ecx\n\t"
+		"shr %%cl,%0\n\t"
+		"jmp 2b\n"
+		".previous\n"
+		_ASM_EXTABLE(1b, 3b)
+		:"=&r" (ret),"=&c" (dummy)
+		:"m" (*(unsigned long *)addr),
+		 "i" (-sizeof(unsigned long)),
+		 "i" (sizeof(unsigned long)-1));
+	return ret;
+}
+
 #endif /* _ASM_WORD_AT_A_TIME_H */

arch/x86/kernel/cpu/amd.c

@@ -580,6 +580,24 @@ static void __cpuinit init_amd(struct cpuinfo_x86 *c)
 		}
 	}
 
+	/* re-enable TopologyExtensions if switched off by BIOS */
+	if ((c->x86 == 0x15) &&
+	    (c->x86_model >= 0x10) && (c->x86_model <= 0x1f) &&
+	    !cpu_has(c, X86_FEATURE_TOPOEXT)) {
+		u64 val;
+
+		if (!rdmsrl_amd_safe(0xc0011005, &val)) {
+			val |= 1ULL << 54;
+			wrmsrl_amd_safe(0xc0011005, val);
+			rdmsrl(0xc0011005, val);
+			if (val & (1ULL << 54)) {
+				set_cpu_cap(c, X86_FEATURE_TOPOEXT);
+				printk(KERN_INFO FW_INFO "CPU: Re-enabling "
+				  "disabled Topology Extensions Support\n");
+			}
+		}
+	}
+
 	cpu_detect_cache_sizes(c);
 
 	/* Multi core CPU? */

arch/x86/platform/geode/net5501.c

@@ -63,7 +63,7 @@ static struct gpio_led net5501_leds[] = {
 		.name = "net5501:1",
 		.gpio = 6,
 		.default_trigger = "default-on",
-		.active_low = 1,
+		.active_low = 0,
 	},
 };
 

drivers/acpi/power.c

@@ -631,7 +631,7 @@ int acpi_power_get_inferred_state(struct acpi_device *device, int *state)
 	 * We know a device's inferred power state when all the resources
 	 * required for a given D-state are 'on'.
 	 */
-	for (i = ACPI_STATE_D0; i < ACPI_STATE_D3; i++) {
+	for (i = ACPI_STATE_D0; i < ACPI_STATE_D3_HOT; i++) {
 		list = &device->power.states[i].resources;
 		if (list->count < 1)
 			continue;

drivers/acpi/scan.c

@@ -869,7 +869,7 @@ static int acpi_bus_get_power_flags(struct acpi_device *device)
 	/*
 	 * Enumerate supported power management states
 	 */
-	for (i = ACPI_STATE_D0; i <= ACPI_STATE_D3; i++) {
+	for (i = ACPI_STATE_D0; i <= ACPI_STATE_D3_HOT; i++) {
 		struct acpi_device_power_state *ps = &device->power.states[i];
 		char object_name[5] = { '_', 'P', 'R', '0' + i, '\0' };
 
@@ -884,21 +884,18 @@ static int acpi_bus_get_power_flags(struct acpi_device *device)
 				acpi_bus_add_power_resource(ps->resources.handles[j]);
 		}
 
-		/* The exist of _PR3 indicates D3Cold support */
-		if (i == ACPI_STATE_D3) {
-			status = acpi_get_handle(device->handle, object_name, &handle);
-			if (ACPI_SUCCESS(status))
-				device->power.states[ACPI_STATE_D3_COLD].flags.valid = 1;
-		}
-
 		/* Evaluate "_PSx" to see if we can do explicit sets */
 		object_name[2] = 'S';
 		status = acpi_get_handle(device->handle, object_name, &handle);
 		if (ACPI_SUCCESS(status))
 			ps->flags.explicit_set = 1;
 
-		/* State is valid if we have some power control */
-		if (ps->resources.count || ps->flags.explicit_set)
+		/*
+		 * State is valid if there are means to put the device into it.
+		 * D3hot is only valid if _PR3 present.
+		 */
+		if (ps->resources.count ||
+		    (ps->flags.explicit_set && i < ACPI_STATE_D3_HOT))
 			ps->flags.valid = 1;
 
 		ps->power = -1;	/* Unknown - driver assigned */

drivers/ata/ahci.c

@@ -394,6 +394,8 @@ static const struct pci_device_id ahci_pci_tbl[] = {
 	  .driver_data = board_ahci_yes_fbs },			/* 88se9128 */
 	{ PCI_DEVICE(0x1b4b, 0x9125),
 	  .driver_data = board_ahci_yes_fbs },			/* 88se9125 */
+	{ PCI_DEVICE(0x1b4b, 0x917a),
+	  .driver_data = board_ahci_yes_fbs },			/* 88se9172 */
 	{ PCI_DEVICE(0x1b4b, 0x91a3),
 	  .driver_data = board_ahci_yes_fbs },
 

drivers/ata/ahci_platform.c

@@ -280,6 +280,7 @@ static struct dev_pm_ops ahci_pm_ops = {
 
 static const struct of_device_id ahci_of_match[] = {
 	{ .compatible = "calxeda,hb-ahci", },
+	{ .compatible = "snps,spear-ahci", },
 	{},
 };
 MODULE_DEVICE_TABLE(of, ahci_of_match);

drivers/ata/libata-core.c

@@ -95,7 +95,7 @@ static unsigned int ata_dev_set_xfermode(struct ata_device *dev);
 static void ata_dev_xfermask(struct ata_device *dev);
 static unsigned long ata_dev_blacklisted(const struct ata_device *dev);
 
-atomic_t ata_print_id = ATOMIC_INIT(1);
+atomic_t ata_print_id = ATOMIC_INIT(0);
 
 struct ata_force_param {
 	const char	*name;

drivers/ata/libata-eh.c

@@ -3501,7 +3501,8 @@ static int ata_count_probe_trials_cb(struct ata_ering_entry *ent, void *void_arg
 	u64 now = get_jiffies_64();
 	int *trials = void_arg;
 
-	if (ent->timestamp < now - min(now, interval))
+	if ((ent->eflags & ATA_EFLAG_OLD_ER) ||
+	    (ent->timestamp < now - min(now, interval)))
 		return -1;
 
 	(*trials)++;

drivers/ata/libata-scsi.c

@@ -3399,7 +3399,8 @@ int ata_scsi_add_hosts(struct ata_host *host, struct scsi_host_template *sht)
 		 */
 		shost->max_host_blocked = 1;
 
-		rc = scsi_add_host(ap->scsi_host, &ap->tdev);
+		rc = scsi_add_host_with_dma(ap->scsi_host,
+						&ap->tdev, ap->host->dev);
 		if (rc)
 			goto err_add;
 	}
@@ -3838,18 +3839,25 @@ void ata_sas_port_stop(struct ata_port *ap)
 }
 EXPORT_SYMBOL_GPL(ata_sas_port_stop);
 
-int ata_sas_async_port_init(struct ata_port *ap)
+/**
+ * ata_sas_async_probe - simply schedule probing and return
+ * @ap: Port to probe
+ *
+ * For batch scheduling of probe for sas attached ata devices, assumes
+ * the port has already been through ata_sas_port_init()
+ */
+void ata_sas_async_probe(struct ata_port *ap)
 {
-	int rc = ap->ops->port_start(ap);
-
-	if (!rc) {
-		ap->print_id = atomic_inc_return(&ata_print_id);
-		__ata_port_probe(ap);
-	}
+	__ata_port_probe(ap);
+}
+EXPORT_SYMBOL_GPL(ata_sas_async_probe);
 
-	return rc;
+int ata_sas_sync_probe(struct ata_port *ap)
+{
+	return ata_port_probe(ap);
 }
-EXPORT_SYMBOL_GPL(ata_sas_async_port_init);
+EXPORT_SYMBOL_GPL(ata_sas_sync_probe);
+
 
 /**
  *	ata_sas_port_init - Initialize a SATA device
@@ -3866,12 +3874,10 @@ int ata_sas_port_init(struct ata_port *ap)
 {
 	int rc = ap->ops->port_start(ap);
 
-	if (!rc) {
-		ap->print_id = atomic_inc_return(&ata_print_id);
-		rc = ata_port_probe(ap);
-	}
-
-	return rc;
+	if (rc)
+		return rc;
+	ap->print_id = atomic_inc_return(&ata_print_id);
+	return 0;
 }
 EXPORT_SYMBOL_GPL(ata_sas_port_init);
 

drivers/ata/pata_arasan_cf.c

@@ -943,9 +943,9 @@ static int arasan_cf_resume(struct device *dev)
 
 	return 0;
 }
+#endif
 
 static SIMPLE_DEV_PM_OPS(arasan_cf_pm_ops, arasan_cf_suspend, arasan_cf_resume);
-#endif
 
 static struct platform_driver arasan_cf_driver = {
 	.probe		= arasan_cf_probe,
@@ -953,9 +953,7 @@ static struct platform_driver arasan_cf_driver = {
 	.driver		= {
 		.name	= DRIVER_NAME,
 		.owner	= THIS_MODULE,
-#ifdef CONFIG_PM
 		.pm	= &arasan_cf_pm_ops,
-#endif
 	},
 };
 

drivers/bluetooth/ath3k.c

@@ -75,6 +75,8 @@ static struct usb_device_id ath3k_table[] = {
 	{ USB_DEVICE(0x0CF3, 0x311D) },
 	{ USB_DEVICE(0x13d3, 0x3375) },
 	{ USB_DEVICE(0x04CA, 0x3005) },
+	{ USB_DEVICE(0x13d3, 0x3362) },
+	{ USB_DEVICE(0x0CF3, 0xE004) },
 
 	/* Atheros AR5BBU12 with sflash firmware */
 	{ USB_DEVICE(0x0489, 0xE02C) },
@@ -94,6 +96,8 @@ static struct usb_device_id ath3k_blist_tbl[] = {
 	{ USB_DEVICE(0x0cf3, 0x311D), .driver_info = BTUSB_ATH3012 },
 	{ USB_DEVICE(0x13d3, 0x3375), .driver_info = BTUSB_ATH3012 },
 	{ USB_DEVICE(0x04ca, 0x3005), .driver_info = BTUSB_ATH3012 },
+	{ USB_DEVICE(0x13d3, 0x3362), .driver_info = BTUSB_ATH3012 },
+	{ USB_DEVICE(0x0cf3, 0xe004), .driver_info = BTUSB_ATH3012 },
 
 	{ }	/* Terminating entry */
 };

drivers/bluetooth/btusb.c

@@ -101,12 +101,16 @@ static struct usb_device_id btusb_table[] = {
 	{ USB_DEVICE(0x0c10, 0x0000) },
 
 	/* Broadcom BCM20702A0 */
+	{ USB_DEVICE(0x0489, 0xe042) },
 	{ USB_DEVICE(0x0a5c, 0x21e3) },
 	{ USB_DEVICE(0x0a5c, 0x21e6) },
 	{ USB_DEVICE(0x0a5c, 0x21e8) },
 	{ USB_DEVICE(0x0a5c, 0x21f3) },
 	{ USB_DEVICE(0x413c, 0x8197) },
 
+	/* Foxconn - Hon Hai */
+	{ USB_DEVICE(0x0489, 0xe033) },
+
 	{ }	/* Terminating entry */
 };
 
@@ -133,6 +137,8 @@ static struct usb_device_id blacklist_table[] = {
 	{ USB_DEVICE(0x0cf3, 0x311d), .driver_info = BTUSB_ATH3012 },
 	{ USB_DEVICE(0x13d3, 0x3375), .driver_info = BTUSB_ATH3012 },
 	{ USB_DEVICE(0x04ca, 0x3005), .driver_info = BTUSB_ATH3012 },
+	{ USB_DEVICE(0x13d3, 0x3362), .driver_info = BTUSB_ATH3012 },
+	{ USB_DEVICE(0x0cf3, 0xe004), .driver_info = BTUSB_ATH3012 },
 
 	/* Atheros AR5BBU12 with sflash firmware */
 	{ USB_DEVICE(0x0489, 0xe02c), .driver_info = BTUSB_IGNORE },

drivers/firmware/efivars.c

@@ -191,6 +191,190 @@ utf16_strncmp(const efi_char16_t *a, const efi_char16_t *b, size_t len)
 	}
 }
 
+static bool
+validate_device_path(struct efi_variable *var, int match, u8 *buffer,
+		     unsigned long len)
+{
+	struct efi_generic_dev_path *node;
+	int offset = 0;
+
+	node = (struct efi_generic_dev_path *)buffer;
+
+	if (len < sizeof(*node))
+		return false;
+
+	while (offset <= len - sizeof(*node) &&
+	       node->length >= sizeof(*node) &&
+		node->length <= len - offset) {
+		offset += node->length;
+
+		if ((node->type == EFI_DEV_END_PATH ||
+		     node->type == EFI_DEV_END_PATH2) &&
+		    node->sub_type == EFI_DEV_END_ENTIRE)
+			return true;
+
+		node = (struct efi_generic_dev_path *)(buffer + offset);
+	}
+
+	/*
+	 * If we're here then either node->length pointed past the end
+	 * of the buffer or we reached the end of the buffer without
+	 * finding a device path end node.
+	 */
+	return false;
+}
+
+static bool
+validate_boot_order(struct efi_variable *var, int match, u8 *buffer,
+		    unsigned long len)
+{
+	/* An array of 16-bit integers */
+	if ((len % 2) != 0)
+		return false;
+
+	return true;
+}
+
+static bool
+validate_load_option(struct efi_variable *var, int match, u8 *buffer,
+		     unsigned long len)
+{
+	u16 filepathlength;
+	int i, desclength = 0, namelen;
+
+	namelen = utf16_strnlen(var->VariableName, sizeof(var->VariableName));
+
+	/* Either "Boot" or "Driver" followed by four digits of hex */
+	for (i = match; i < match+4; i++) {
+		if (var->VariableName[i] > 127 ||
+		    hex_to_bin(var->VariableName[i] & 0xff) < 0)
+			return true;
+	}
+
+	/* Reject it if there's 4 digits of hex and then further content */
+	if (namelen > match + 4)
+		return false;
+
+	/* A valid entry must be at least 8 bytes */
+	if (len < 8)
+		return false;
+
+	filepathlength = buffer[4] | buffer[5] << 8;
+
+	/*
+	 * There's no stored length for the description, so it has to be
+	 * found by hand
+	 */
+	desclength = utf16_strsize((efi_char16_t *)(buffer + 6), len - 6) + 2;
+
+	/* Each boot entry must have a descriptor */
+	if (!desclength)
+		return false;
+
+	/*
+	 * If the sum of the length of the description, the claimed filepath
+	 * length and the original header are greater than the length of the
+	 * variable, it's malformed
+	 */
+	if ((desclength + filepathlength + 6) > len)
+		return false;
+
+	/*
+	 * And, finally, check the filepath
+	 */
+	return validate_device_path(var, match, buffer + desclength + 6,
+				    filepathlength);
+}
+
+static bool
+validate_uint16(struct efi_variable *var, int match, u8 *buffer,
+		unsigned long len)
+{
+	/* A single 16-bit integer */
+	if (len != 2)
+		return false;
+
+	return true;
+}
+
+static bool
+validate_ascii_string(struct efi_variable *var, int match, u8 *buffer,
+		      unsigned long len)
+{
+	int i;
+
+	for (i = 0; i < len; i++) {
+		if (buffer[i] > 127)
+			return false;
+
+		if (buffer[i] == 0)
+			return true;
+	}
+
+	return false;
+}
+
+struct variable_validate {
+	char *name;
+	bool (*validate)(struct efi_variable *var, int match, u8 *data,
+			 unsigned long len);
+};
+
+static const struct variable_validate variable_validate[] = {
+	{ "BootNext", validate_uint16 },
+	{ "BootOrder", validate_boot_order },
+	{ "DriverOrder", validate_boot_order },
+	{ "Boot*", validate_load_option },
+	{ "Driver*", validate_load_option },
+	{ "ConIn", validate_device_path },
+	{ "ConInDev", validate_device_path },
+	{ "ConOut", validate_device_path },
+	{ "ConOutDev", validate_device_path },
+	{ "ErrOut", validate_device_path },
+	{ "ErrOutDev", validate_device_path },
+	{ "Timeout", validate_uint16 },
+	{ "Lang", validate_ascii_string },
+	{ "PlatformLang", validate_ascii_string },
+	{ "", NULL },
+};
+
+static bool
+validate_var(struct efi_variable *var, u8 *data, unsigned long len)
+{
+	int i;
+	u16 *unicode_name = var->VariableName;
+
+	for (i = 0; variable_validate[i].validate != NULL; i++) {
+		const char *name = variable_validate[i].name;
+		int match;
+
+		for (match = 0; ; match++) {
+			char c = name[match];
+			u16 u = unicode_name[match];
+
+			/* All special variables are plain ascii */
+			if (u > 127)
+				return true;
+
+			/* Wildcard in the matching name means we've matched */
+			if (c == '*')
+				return variable_validate[i].validate(var,
+							     match, data, len);
+
+			/* Case sensitive match */
+			if (c != u)
+				break;
+
+			/* Reached the end of the string while matching */
+			if (!c)
+				return variable_validate[i].validate(var,
+							     match, data, len);
+		}
+	}
+
+	return true;
+}
+
 static efi_status_t
 get_var_data_locked(struct efivars *efivars, struct efi_variable *var)
 {
@@ -324,6 +508,12 @@ efivar_store_raw(struct efivar_entry *entry, const char *buf, size_t count)
 		return -EINVAL;
 	}
 
+	if ((new_var->Attributes & ~EFI_VARIABLE_MASK) != 0 ||
+	    validate_var(new_var, new_var->Data, new_var->DataSize) == false) {
+		printk(KERN_ERR "efivars: Malformed variable content\n");
+		return -EINVAL;
+	}
+
 	spin_lock(&efivars->lock);
 	status = efivars->ops->set_variable(new_var->VariableName,
 					    &new_var->VendorGuid,
@@ -626,6 +816,12 @@ static ssize_t efivar_create(struct file *filp, struct kobject *kobj,
 	if (!capable(CAP_SYS_ADMIN))
 		return -EACCES;
 
+	if ((new_var->Attributes & ~EFI_VARIABLE_MASK) != 0 ||
+	    validate_var(new_var, new_var->Data, new_var->DataSize) == false) {
+		printk(KERN_ERR "efivars: Malformed variable content\n");
+		return -EINVAL;
+	}
+
 	spin_lock(&efivars->lock);
 
 	/*

drivers/gpu/drm/i915/i915_debugfs.c

@@ -1224,6 +1224,9 @@ static int i915_emon_status(struct seq_file *m, void *unused)
 	unsigned long temp, chipset, gfx;
 	int ret;
 
+	if (!IS_GEN5(dev))
+		return -ENODEV;
+
 	ret = mutex_lock_interruptible(&dev->struct_mutex);
 	if (ret)
 		return ret;

drivers/gpu/drm/i915/i915_dma.c

@@ -1701,6 +1701,9 @@ void i915_update_gfx_val(struct drm_i915_private *dev_priv)
 	unsigned long diffms;
 	u32 count;
 
+	if (dev_priv->info->gen != 5)
+		return;
+
 	getrawmonotonic(&now);
 	diff1 = timespec_sub(now, dev_priv->last_time2);
 
@@ -2121,12 +2124,14 @@ int i915_driver_load(struct drm_device *dev, unsigned long flags)
 	setup_timer(&dev_priv->hangcheck_timer, i915_hangcheck_elapsed,
 		    (unsigned long) dev);
 
-	spin_lock(&mchdev_lock);
-	i915_mch_dev = dev_priv;
-	dev_priv->mchdev_lock = &mchdev_lock;
-	spin_unlock(&mchdev_lock);
+	if (IS_GEN5(dev)) {
+		spin_lock(&mchdev_lock);
+		i915_mch_dev = dev_priv;
+		dev_priv->mchdev_lock = &mchdev_lock;
+		spin_unlock(&mchdev_lock);
 
-	ips_ping_for_i915_load();
+		ips_ping_for_i915_load();
+	}
 
 	return 0;
 

drivers/gpu/drm/i915/intel_display.c

@@ -7072,9 +7072,6 @@ static void intel_decrease_pllclock(struct drm_crtc *crtc)
 	struct drm_device *dev = crtc->dev;
 	drm_i915_private_t *dev_priv = dev->dev_private;
 	struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
-	int pipe = intel_crtc->pipe;
-	int dpll_reg = DPLL(pipe);
-	int dpll = I915_READ(dpll_reg);
 
 	if (HAS_PCH_SPLIT(dev))
 		return;
@@ -7087,10 +7084,15 @@ static void intel_decrease_pllclock(struct drm_crtc *crtc)
 	 * the manual case.
 	 */
 	if (!HAS_PIPE_CXSR(dev) && intel_crtc->lowfreq_avail) {
+		int pipe = intel_crtc->pipe;
+		int dpll_reg = DPLL(pipe);
+		u32 dpll;
+
 		DRM_DEBUG_DRIVER("downclocking LVDS\n");
 
 		assert_panel_unlocked(dev_priv, pipe);
 
+		dpll = I915_READ(dpll_reg);
 		dpll |= DISPLAY_RATE_SELECT_FPA1;
 		I915_WRITE(dpll_reg, dpll);
 		intel_wait_for_vblank(dev, pipe);
@@ -7098,7 +7100,6 @@ static void intel_decrease_pllclock(struct drm_crtc *crtc)
 		if (!(dpll & DISPLAY_RATE_SELECT_FPA1))
 			DRM_DEBUG_DRIVER("failed to downclock LVDS!\n");
 	}
-
 }
 
 /**

drivers/gpu/drm/i915/intel_hdmi.c

@@ -136,7 +136,7 @@ static void i9xx_write_infoframe(struct drm_encoder *encoder,
 
 	val &= ~VIDEO_DIP_SELECT_MASK;
 
-	I915_WRITE(VIDEO_DIP_CTL, val | port | flags);
+	I915_WRITE(VIDEO_DIP_CTL, VIDEO_DIP_ENABLE | val | port | flags);
 
 	for (i = 0; i < len; i += 4) {
 		I915_WRITE(VIDEO_DIP_DATA, *data);

drivers/gpu/drm/i915/intel_lvds.c

@@ -750,7 +750,7 @@ static const struct dmi_system_id intel_no_lvds[] = {
 		.ident = "Hewlett-Packard t5745",
 		.matches = {
 			DMI_MATCH(DMI_BOARD_VENDOR, "Hewlett-Packard"),
-			DMI_MATCH(DMI_BOARD_NAME, "hp t5745"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "hp t5745"),
 		},
 	},
 	{
@@ -758,7 +758,7 @@ static const struct dmi_system_id intel_no_lvds[] = {
 		.ident = "Hewlett-Packard st5747",
 		.matches = {
 			DMI_MATCH(DMI_BOARD_VENDOR, "Hewlett-Packard"),
-			DMI_MATCH(DMI_BOARD_NAME, "hp st5747"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "hp st5747"),
 		},
 	},
 	{

drivers/gpu/drm/nouveau/nouveau_acpi.c

@@ -270,7 +270,7 @@ static bool nouveau_dsm_detect(void)
 	struct acpi_buffer buffer = {sizeof(acpi_method_name), acpi_method_name};
 	struct pci_dev *pdev = NULL;
 	int has_dsm = 0;
-	int has_optimus;
+	int has_optimus = 0;
 	int vga_count = 0;
 	bool guid_valid;
 	int retval;

drivers/gpu/drm/nouveau/nouveau_bios.c

@@ -6156,10 +6156,14 @@ dcb_fake_connectors(struct nvbios *bios)
 
 	/* heuristic: if we ever get a non-zero connector field, assume
 	 * that all the indices are valid and we don't need fake them.
+	 *
+	 * and, as usual, a blacklist of boards with bad bios data..
 	 */
-	for (i = 0; i < dcbt->entries; i++) {
-		if (dcbt->entry[i].connector)
-			return;
+	if (!nv_match_device(bios->dev, 0x0392, 0x107d, 0x20a2)) {
+		for (i = 0; i < dcbt->entries; i++) {
+			if (dcbt->entry[i].connector)
+				return;
+		}
 	}
 
 	/* no useful connector info available, we need to make it up

drivers/gpu/drm/nouveau/nouveau_hdmi.c

@@ -32,7 +32,9 @@ static bool
 hdmi_sor(struct drm_encoder *encoder)
 {
 	struct drm_nouveau_private *dev_priv = encoder->dev->dev_private;
-	if (dev_priv->chipset < 0xa3)
+	if (dev_priv->chipset <  0xa3 ||
+	    dev_priv->chipset == 0xaa ||
+	    dev_priv->chipset == 0xac)
 		return false;
 	return true;
 }

drivers/gpu/drm/nouveau/nv10_gpio.c

@@ -65,7 +65,7 @@ nv10_gpio_drive(struct drm_device *dev, int line, int dir, int out)
 	if (line < 10) {
 		line = (line - 2) * 4;
 		reg  = NV_PCRTC_GPIO_EXT;
-		mask = 0x00000003 << ((line - 2) * 4);
+		mask = 0x00000003;
 		data = (dir << 1) | out;
 	} else
 	if (line < 14) {

drivers/gpu/drm/nouveau/nvc0_fb.c

@@ -54,6 +54,11 @@ nvc0_mfb_isr(struct drm_device *dev)
 			nvc0_mfb_subp_isr(dev, unit, subp);
 		units &= ~(1 << unit);
 	}
+
+	/* we do something horribly wrong and upset PMFB a lot, so mask off
+	 * interrupts from it after the first one until it's fixed
+	 */
+	nv_mask(dev, 0x000640, 0x02000000, 0x00000000);
 }
 
 static void

drivers/gpu/drm/radeon/radeon_device.c

@@ -241,8 +241,8 @@ int radeon_wb_init(struct radeon_device *rdev)
 				rdev->wb.use_event = true;
 		}
 	}
-	/* always use writeback/events on NI */
-	if (ASIC_IS_DCE5(rdev)) {
+	/* always use writeback/events on NI, APUs */
+	if (rdev->family >= CHIP_PALM) {
 		rdev->wb.enabled = true;
 		rdev->wb.use_event = true;
 	}

drivers/hwmon/coretemp.c

@@ -52,7 +52,7 @@ module_param_named(tjmax, force_tjmax, int, 0444);
 MODULE_PARM_DESC(tjmax, "TjMax value in degrees Celsius");
 
 #define BASE_SYSFS_ATTR_NO	2	/* Sysfs Base attr no for coretemp */
-#define NUM_REAL_CORES		16	/* Number of Real cores per cpu */
+#define NUM_REAL_CORES		32	/* Number of Real cores per cpu */
 #define CORETEMP_NAME_LENGTH	17	/* String Length of attrs */
 #define MAX_CORE_ATTRS		4	/* Maximum no of basic attrs */
 #define TOTAL_ATTRS		(MAX_CORE_ATTRS + 1)
@@ -709,6 +709,10 @@ static void __cpuinit put_core_offline(unsigned int cpu)
 
 	indx = TO_ATTR_NO(cpu);
 
+	/* The core id is too big, just return */
+	if (indx > MAX_CORE_DATA - 1)
+		return;
+
 	if (pdata->core_data[indx] && pdata->core_data[indx]->cpu == cpu)
 		coretemp_remove_core(pdata, &pdev->dev, indx);
 

drivers/i2c/busses/i2c-eg20t.c

@@ -324,7 +324,7 @@ static s32 pch_i2c_wait_for_xfer_complete(struct i2c_algo_pch_data *adap)
 {
 	long ret;
 	ret = wait_event_timeout(pch_event,
-			(adap->pch_event_flag != 0), msecs_to_jiffies(50));
+			(adap->pch_event_flag != 0), msecs_to_jiffies(1000));
 
 	if (ret == 0) {
 		pch_err(adap, "timeout: %x\n", adap->pch_event_flag);
@@ -1063,6 +1063,6 @@ module_exit(pch_pci_exit);
 
 MODULE_DESCRIPTION("Intel EG20T PCH/LAPIS Semico ML7213/ML7223/ML7831 IOH I2C");
 MODULE_LICENSE("GPL");
-MODULE_AUTHOR("Tomoya MORINAGA. <tomoya-linux@dsn.lapis-semi.com>");
+MODULE_AUTHOR("Tomoya MORINAGA. <tomoya.rohm@gmail.com>");
 module_param(pch_i2c_speed, int, (S_IRUSR | S_IWUSR));
 module_param(pch_clk, int, (S_IRUSR | S_IWUSR));

drivers/i2c/busses/i2c-mxs.c

@@ -227,6 +227,7 @@ static int mxs_i2c_xfer_msg(struct i2c_adapter *adap, struct i2c_msg *msg,
 		return -EINVAL;
 
 	init_completion(&i2c->cmd_complete);
+	i2c->cmd_err = 0;
 
 	flags = stop ? MXS_I2C_CTRL0_POST_SEND_STOP : 0;
 
@@ -252,6 +253,9 @@ static int mxs_i2c_xfer_msg(struct i2c_adapter *adap, struct i2c_msg *msg,
 
 	if (i2c->cmd_err == -ENXIO)
 		mxs_i2c_reset(i2c);
+	else
+		writel(MXS_I2C_QUEUECTRL_QUEUE_RUN,
+				i2c->regs + MXS_I2C_QUEUECTRL_CLR);
 
 	dev_dbg(i2c->dev, "Done with err=%d\n", i2c->cmd_err);
 
@@ -299,8 +303,6 @@ static irqreturn_t mxs_i2c_isr(int this_irq, void *dev_id)
 		    MXS_I2C_CTRL1_SLAVE_STOP_IRQ | MXS_I2C_CTRL1_SLAVE_IRQ))
 		/* MXS_I2C_CTRL1_OVERSIZE_XFER_TERM_IRQ is only for slaves */
 		i2c->cmd_err = -EIO;
-	else
-		i2c->cmd_err = 0;
 
 	is_last_cmd = (readl(i2c->regs + MXS_I2C_QUEUESTAT) &
 		MXS_I2C_QUEUESTAT_WRITE_QUEUE_CNT_MASK) == 0;
@@ -384,8 +386,6 @@ static int __devexit mxs_i2c_remove(struct platform_device *pdev)
 	if (ret)
 		return -EBUSY;
 
-	writel(MXS_I2C_QUEUECTRL_QUEUE_RUN,
-			i2c->regs + MXS_I2C_QUEUECTRL_CLR);
 	writel(MXS_I2C_CTRL0_SFTRST, i2c->regs + MXS_I2C_CTRL0_SET);
 
 	platform_set_drvdata(pdev, NULL);

drivers/i2c/busses/i2c-pnx.c

@@ -546,8 +546,7 @@ static int i2c_pnx_controller_suspend(struct platform_device *pdev,
 {
 	struct i2c_pnx_algo_data *alg_data = platform_get_drvdata(pdev);
 
-	/* FIXME: shouldn't this be clk_disable? */
-	clk_enable(alg_data->clk);
+	clk_disable(alg_data->clk);
 
 	return 0;
 }

drivers/i2c/busses/i2c-tegra.c

@@ -516,6 +516,14 @@ static int tegra_i2c_xfer_msg(struct tegra_i2c_dev *i2c_dev,
 	if (likely(i2c_dev->msg_err == I2C_ERR_NONE))
 		return 0;
 
+	/*
+	 * NACK interrupt is generated before the I2C controller generates the
+	 * STOP condition on the bus. So wait for 2 clock periods before resetting
+	 * the controller so that STOP condition has been delivered properly.
+	 */
+	if (i2c_dev->msg_err == I2C_ERR_NO_ACK)
+		udelay(DIV_ROUND_UP(2 * 1000000, i2c_dev->bus_clk_rate));
+
 	tegra_i2c_init(i2c_dev);
 	if (i2c_dev->msg_err == I2C_ERR_NO_ACK) {
 		if (msg->flags & I2C_M_IGNORE_NAK)

drivers/input/mouse/synaptics.c

@@ -274,7 +274,8 @@ static int synaptics_set_advanced_gesture_mode(struct psmouse *psmouse)
 	static unsigned char param = 0xc8;
 	struct synaptics_data *priv = psmouse->private;
 
-	if (!SYN_CAP_ADV_GESTURE(priv->ext_cap_0c))
+	if (!(SYN_CAP_ADV_GESTURE(priv->ext_cap_0c) ||
+	      SYN_CAP_IMAGE_SENSOR(priv->ext_cap_0c)))
 		return 0;
 
 	if (psmouse_sliced_command(psmouse, SYN_QUE_MODEL))

drivers/md/bitmap.c

@@ -1727,8 +1727,7 @@ int bitmap_create(struct mddev *mddev)
 	bitmap->chunkshift = (ffz(~mddev->bitmap_info.chunksize)
 			      - BITMAP_BLOCK_SHIFT);
 
-	/* now that chunksize and chunkshift are set, we can use these macros */
-	chunks = (blocks + bitmap->chunkshift - 1) >>
+	chunks = (blocks + (1 << bitmap->chunkshift) - 1) >>
 			bitmap->chunkshift;
 	pages = (chunks + PAGE_COUNTER_RATIO - 1) / PAGE_COUNTER_RATIO;
 

drivers/md/bitmap.h

@@ -101,9 +101,6 @@ typedef __u16 bitmap_counter_t;
 
 #define BITMAP_BLOCK_SHIFT 9
 
-/* how many blocks per chunk? (this is variable) */
-#define CHUNK_BLOCK_RATIO(bitmap) ((bitmap)->mddev->bitmap_info.chunksize >> BITMAP_BLOCK_SHIFT)
-
 #endif
 
 /*

drivers/mfd/omap-usb-host.c

@@ -25,6 +25,7 @@
 #include <linux/clk.h>
 #include <linux/dma-mapping.h>
 #include <linux/spinlock.h>
+#include <plat/cpu.h>
 #include <plat/usb.h>
 #include <linux/pm_runtime.h>