Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net

Several cases of overlapping changes, as well as one instance
(vxlan) of a bug fix in 'net' overlapping with code movement
in 'net-next'.

Signed-off-by: David S. Miller <davem@davemloft.net>

Documentation/DocBook/media/v4l/media-types.xml

@@ -56,10 +56,6 @@
 	    <entry><constant>MEDIA_ENT_F_CONN_COMPOSITE</constant></entry>
 	    <entry>Connector for a RGB composite signal.</entry>
 	  </row>
-	  <row>
-	    <entry><constant>MEDIA_ENT_F_CONN_TEST</constant></entry>
-	    <entry>Connector for a test generator.</entry>
-	  </row>
 	  <row>
 	    <entry><constant>MEDIA_ENT_F_CAM_SENSOR</constant></entry>
 	    <entry>Camera video sensor entity.</entry>

Documentation/devicetree/bindings/regulator/tps65217.txt

@@ -26,11 +26,7 @@ Example:
 		ti,pmic-shutdown-controller;
 
 		regulators {
-			#address-cells = <1>;
-			#size-cells = <0>;
-
 			dcdc1_reg: dcdc1 {
-				reg = <0>;
 				regulator-min-microvolt = <900000>;
 				regulator-max-microvolt = <1800000>;
 				regulator-boot-on;
@@ -38,7 +34,6 @@ Example:
 			};
 
 			dcdc2_reg: dcdc2 {
-				reg = <1>;
 				regulator-min-microvolt = <900000>;
 				regulator-max-microvolt = <3300000>;
 				regulator-boot-on;
@@ -46,7 +41,6 @@ Example:
 			};
 
 			dcdc3_reg: dcc3 {
-				reg = <2>;
 				regulator-min-microvolt = <900000>;
 				regulator-max-microvolt = <1500000>;
 				regulator-boot-on;
@@ -54,7 +48,6 @@ Example:
 			};
 
 			ldo1_reg: ldo1 {
-				reg = <3>;
 				regulator-min-microvolt = <1000000>;
 				regulator-max-microvolt = <3300000>;
 				regulator-boot-on;
@@ -62,7 +55,6 @@ Example:
 			};
 
 			ldo2_reg: ldo2 {
-				reg = <4>;
 				regulator-min-microvolt = <900000>;
 				regulator-max-microvolt = <3300000>;
 				regulator-boot-on;
@@ -70,7 +62,6 @@ Example:
 			};
 
 			ldo3_reg: ldo3 {
-				reg = <5>;
 				regulator-min-microvolt = <1800000>;
 				regulator-max-microvolt = <3300000>;
 				regulator-boot-on;
@@ -78,7 +69,6 @@ Example:
 			};
 
 			ldo4_reg: ldo4 {
-				reg = <6>;
 				regulator-min-microvolt = <1800000>;
 				regulator-max-microvolt = <3300000>;
 				regulator-boot-on;

Documentation/watchdog/watchdog-parameters.txt

@@ -400,3 +400,7 @@ wm8350_wdt:
 nowayout: Watchdog cannot be stopped once started
 	(default=kernel config parameter)
 -------------------------------------------------
+sun4v_wdt:
+timeout_ms: Watchdog timeout in milliseconds 1..180000, default=60000)
+nowayout: Watchdog cannot be stopped once started
+-------------------------------------------------

MAINTAINERS

@@ -920,17 +920,24 @@ M:	Emilio López <emilio@elopez.com.ar>
 S:	Maintained
 F:	drivers/clk/sunxi/
 
-ARM/Amlogic MesonX SoC support
+ARM/Amlogic Meson SoC support
 M:	Carlo Caione <carlo@caione.org>
 L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
+L:	linux-meson@googlegroups.com
+W:	http://linux-meson.com/
 S:	Maintained
-F:	drivers/media/rc/meson-ir.c
-N:	meson[x68]
+F:	arch/arm/mach-meson/
+F:	arch/arm/boot/dts/meson*
+N:	meson
 
 ARM/Annapurna Labs ALPINE ARCHITECTURE
 M:	Tsahee Zidenberg <tsahee@annapurnalabs.com>
+M:	Antoine Tenart <antoine.tenart@free-electrons.com>
 S:	Maintained
 F:	arch/arm/mach-alpine/
+F:	arch/arm/boot/dts/alpine*
+F:	arch/arm64/boot/dts/al/
+F:	drivers/*/*alpine*
 
 ARM/ATMEL AT91RM9200, AT91SAM9 AND SAMA5 SOC SUPPORT
 M:	Nicolas Ferre <nicolas.ferre@atmel.com>
@@ -3446,7 +3453,6 @@ F:	drivers/usb/dwc2/
 DESIGNWARE USB3 DRD IP DRIVER
 M:	Felipe Balbi <balbi@kernel.org>
 L:	linux-usb@vger.kernel.org
-L:	linux-omap@vger.kernel.org
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb.git
 S:	Maintained
 F:	drivers/usb/dwc3/
@@ -4522,6 +4528,12 @@ L:	linuxppc-dev@lists.ozlabs.org
 S:	Maintained
 F:	drivers/dma/fsldma.*
 
+FREESCALE GPMI NAND DRIVER
+M:	Han Xu <han.xu@nxp.com>
+L:	linux-mtd@lists.infradead.org
+S:	Maintained
+F:	drivers/mtd/nand/gpmi-nand/*
+
 FREESCALE I2C CPM DRIVER
 M:	Jochen Friedrich <jochen@scram.de>
 L:	linuxppc-dev@lists.ozlabs.org
@@ -4538,7 +4550,7 @@ F:	include/linux/platform_data/video-imxfb.h
 F:	drivers/video/fbdev/imxfb.c
 
 FREESCALE QUAD SPI DRIVER
-M:	Han Xu <han.xu@freescale.com>
+M:	Han Xu <han.xu@nxp.com>
 L:	linux-mtd@lists.infradead.org
 S:	Maintained
 F:	drivers/mtd/spi-nor/fsl-quadspi.c
@@ -4552,6 +4564,15 @@ S:	Maintained
 F:	drivers/net/ethernet/freescale/fs_enet/
 F:	include/linux/fs_enet_pd.h
 
+FREESCALE IMX / MXC FEC DRIVER
+M:	Fugang Duan <fugang.duan@nxp.com>
+L:	netdev@vger.kernel.org
+S:	Maintained
+F:	drivers/net/ethernet/freescale/fec_main.c
+F:	drivers/net/ethernet/freescale/fec_ptp.c
+F:	drivers/net/ethernet/freescale/fec.h
+F:	Documentation/devicetree/bindings/net/fsl-fec.txt
+
 FREESCALE QUICC ENGINE LIBRARY
 L:	linuxppc-dev@lists.ozlabs.org
 S:	Orphan
@@ -6769,6 +6790,7 @@ S:	Maintained
 F:	Documentation/networking/mac80211-injection.txt
 F:	include/net/mac80211.h
 F:	net/mac80211/
+F:	drivers/net/wireless/mac80211_hwsim.[ch]
 
 MACVLAN DRIVER
 M:	Patrick McHardy <kaber@trash.net>
@@ -7365,7 +7387,7 @@ F:	drivers/tty/isicom.c
 F:	include/linux/isicom.h
 
 MUSB MULTIPOINT HIGH SPEED DUAL-ROLE CONTROLLER
-M:	Felipe Balbi <balbi@kernel.org>
+M:	Bin Liu <b-liu@ti.com>
 L:	linux-usb@vger.kernel.org
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb.git
 S:	Maintained
@@ -7696,13 +7718,13 @@ S:	Maintained
 F:	arch/nios2/
 
 NOKIA N900 POWER SUPPLY DRIVERS
-M:	Pali Rohár <pali.rohar@gmail.com>
-S:	Maintained
+R:	Pali Rohár <pali.rohar@gmail.com>
 F:	include/linux/power/bq2415x_charger.h
 F:	include/linux/power/bq27xxx_battery.h
 F:	include/linux/power/isp1704_charger.h
 F:	drivers/power/bq2415x_charger.c
 F:	drivers/power/bq27xxx_battery.c
+F:	drivers/power/bq27xxx_battery_i2c.c
 F:	drivers/power/isp1704_charger.c
 F:	drivers/power/rx51_battery.c
 
@@ -7933,11 +7955,9 @@ F:	drivers/media/platform/omap3isp/
 F:	drivers/staging/media/omap4iss/
 
 OMAP USB SUPPORT
-M:	Felipe Balbi <balbi@kernel.org>
 L:	linux-usb@vger.kernel.org
 L:	linux-omap@vger.kernel.org
-T:	git git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb.git
-S:	Maintained
+S:	Orphan
 F:	drivers/usb/*/*omap*
 F:	arch/arm/*omap*/usb*
 
@@ -9572,6 +9592,12 @@ M:	Andreas Noever <andreas.noever@gmail.com>
 S:	Maintained
 F:	drivers/thunderbolt/
 
+TI BQ27XXX POWER SUPPLY DRIVER
+R:	Andrew F. Davis <afd@ti.com>
+F:	include/linux/power/bq27xxx_battery.h
+F:	drivers/power/bq27xxx_battery.c
+F:	drivers/power/bq27xxx_battery_i2c.c
+
 TIMEKEEPING, CLOCKSOURCE CORE, NTP, ALARMTIMER
 M:	John Stultz <john.stultz@linaro.org>
 M:	Thomas Gleixner <tglx@linutronix.de>

Makefile

@@ -1,7 +1,7 @@
 VERSION = 4
 PATCHLEVEL = 5
 SUBLEVEL = 0
-EXTRAVERSION = -rc5
+EXTRAVERSION = -rc7
 NAME = Blurry Fish Butt
 
 # *DOCUMENTATION*

arch/arc/Kconfig

@@ -12,8 +12,6 @@ config ARC
 	select BUILDTIME_EXTABLE_SORT
 	select COMMON_CLK
 	select CLONE_BACKWARDS
-	# ARC Busybox based initramfs absolutely relies on DEVTMPFS for /dev
-	select DEVTMPFS if !INITRAMFS_SOURCE=""
 	select GENERIC_ATOMIC64
 	select GENERIC_CLOCKEVENTS
 	select GENERIC_FIND_FIRST_BIT
@@ -275,14 +273,6 @@ config ARC_DCCM_BASE
 	default "0xA0000000"
 	depends on ARC_HAS_DCCM
 
-config ARC_HAS_HW_MPY
-	bool "Use Hardware Multiplier (Normal or Faster XMAC)"
-	default y
-	help
-	  Influences how gcc generates code for MPY operations.
-	  If enabled, MPYxx insns are generated, provided by Standard/XMAC
-	  Multipler. Otherwise software multipy lib is used
-
 choice
 	prompt "MMU Version"
 	default ARC_MMU_V3 if ARC_CPU_770
@@ -542,14 +532,6 @@ config ARC_DBG_TLB_MISS_COUNT
 	  Counts number of I and D TLB Misses and exports them via Debugfs
 	  The counters can be cleared via Debugfs as well
 
-if SMP
-
-config ARC_IPI_DBG
-	bool "Debug Inter Core interrupts"
-	default n
-
-endif
-
 endif
 
 config ARC_UBOOT_SUPPORT

arch/arc/Makefile

@@ -74,10 +74,6 @@ ldflags-$(CONFIG_CPU_BIG_ENDIAN)	+= -EB
 # --build-id w/o "-marclinux". Default arc-elf32-ld is OK
 ldflags-$(upto_gcc44)			+= -marclinux
 
-ifndef CONFIG_ARC_HAS_HW_MPY
-	cflags-y	+= -mno-mpy
-endif
-
 LIBGCC	:= $(shell $(CC) $(cflags-y) --print-libgcc-file-name)
 
 # Modules with short calls might break for calls into builtin-kernel

arch/arc/configs/axs101_defconfig

@@ -39,6 +39,7 @@ CONFIG_IP_PNP_RARP=y
 # CONFIG_INET_XFRM_MODE_TUNNEL is not set
 # CONFIG_INET_XFRM_MODE_BEET is not set
 # CONFIG_IPV6 is not set
+CONFIG_DEVTMPFS=y
 # CONFIG_STANDALONE is not set
 # CONFIG_PREVENT_FIRMWARE_BUILD is not set
 # CONFIG_FIRMWARE_IN_KERNEL is not set
@@ -73,7 +74,6 @@ CONFIG_I2C_CHARDEV=y
 CONFIG_I2C_DESIGNWARE_PLATFORM=y
 # CONFIG_HWMON is not set
 CONFIG_FB=y
-# CONFIG_VGA_CONSOLE is not set
 CONFIG_FRAMEBUFFER_CONSOLE=y
 CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y
 CONFIG_LOGO=y
@@ -91,12 +91,10 @@ CONFIG_MMC_SDHCI_PLTFM=y
 CONFIG_MMC_DW=y
 # CONFIG_IOMMU_SUPPORT is not set
 CONFIG_EXT3_FS=y
-CONFIG_EXT4_FS=y
 CONFIG_MSDOS_FS=y
 CONFIG_VFAT_FS=y
 CONFIG_NTFS_FS=y
 CONFIG_TMPFS=y
-CONFIG_JFFS2_FS=y
 CONFIG_NFS_FS=y
 CONFIG_NLS_CODEPAGE_437=y
 CONFIG_NLS_ISO8859_1=y

arch/arc/configs/axs103_defconfig

@@ -39,14 +39,10 @@ CONFIG_IP_PNP_RARP=y
 # CONFIG_INET_XFRM_MODE_TUNNEL is not set
 # CONFIG_INET_XFRM_MODE_BEET is not set
 # CONFIG_IPV6 is not set
+CONFIG_DEVTMPFS=y
 # CONFIG_STANDALONE is not set
 # CONFIG_PREVENT_FIRMWARE_BUILD is not set
 # CONFIG_FIRMWARE_IN_KERNEL is not set
-CONFIG_MTD=y
-CONFIG_MTD_CMDLINE_PARTS=y
-CONFIG_MTD_BLOCK=y
-CONFIG_MTD_NAND=y
-CONFIG_MTD_NAND_AXS=y
 CONFIG_SCSI=y
 CONFIG_BLK_DEV_SD=y
 CONFIG_NETDEVICES=y
@@ -78,14 +74,12 @@ CONFIG_I2C_CHARDEV=y
 CONFIG_I2C_DESIGNWARE_PLATFORM=y
 # CONFIG_HWMON is not set
 CONFIG_FB=y
-# CONFIG_VGA_CONSOLE is not set
 CONFIG_FRAMEBUFFER_CONSOLE=y
 CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y
 CONFIG_LOGO=y
 # CONFIG_LOGO_LINUX_MONO is not set
 # CONFIG_LOGO_LINUX_VGA16 is not set
 # CONFIG_LOGO_LINUX_CLUT224 is not set
-CONFIG_USB=y
 CONFIG_USB_EHCI_HCD=y
 CONFIG_USB_EHCI_HCD_PLATFORM=y
 CONFIG_USB_OHCI_HCD=y
@@ -97,12 +91,10 @@ CONFIG_MMC_SDHCI_PLTFM=y
 CONFIG_MMC_DW=y
 # CONFIG_IOMMU_SUPPORT is not set
 CONFIG_EXT3_FS=y
-CONFIG_EXT4_FS=y
 CONFIG_MSDOS_FS=y
 CONFIG_VFAT_FS=y
 CONFIG_NTFS_FS=y
 CONFIG_TMPFS=y
-CONFIG_JFFS2_FS=y
 CONFIG_NFS_FS=y
 CONFIG_NLS_CODEPAGE_437=y
 CONFIG_NLS_ISO8859_1=y

arch/arc/configs/axs103_smp_defconfig

@@ -40,14 +40,10 @@ CONFIG_IP_PNP_RARP=y
 # CONFIG_INET_XFRM_MODE_TUNNEL is not set
 # CONFIG_INET_XFRM_MODE_BEET is not set
 # CONFIG_IPV6 is not set
+CONFIG_DEVTMPFS=y
 # CONFIG_STANDALONE is not set
 # CONFIG_PREVENT_FIRMWARE_BUILD is not set
 # CONFIG_FIRMWARE_IN_KERNEL is not set
-CONFIG_MTD=y
-CONFIG_MTD_CMDLINE_PARTS=y
-CONFIG_MTD_BLOCK=y
-CONFIG_MTD_NAND=y
-CONFIG_MTD_NAND_AXS=y
 CONFIG_SCSI=y
 CONFIG_BLK_DEV_SD=y
 CONFIG_NETDEVICES=y
@@ -79,14 +75,12 @@ CONFIG_I2C_CHARDEV=y
 CONFIG_I2C_DESIGNWARE_PLATFORM=y
 # CONFIG_HWMON is not set
 CONFIG_FB=y
-# CONFIG_VGA_CONSOLE is not set
 CONFIG_FRAMEBUFFER_CONSOLE=y
 CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y
 CONFIG_LOGO=y
 # CONFIG_LOGO_LINUX_MONO is not set
 # CONFIG_LOGO_LINUX_VGA16 is not set
 # CONFIG_LOGO_LINUX_CLUT224 is not set
-CONFIG_USB=y
 CONFIG_USB_EHCI_HCD=y
 CONFIG_USB_EHCI_HCD_PLATFORM=y
 CONFIG_USB_OHCI_HCD=y
@@ -98,12 +92,10 @@ CONFIG_MMC_SDHCI_PLTFM=y
 CONFIG_MMC_DW=y
 # CONFIG_IOMMU_SUPPORT is not set
 CONFIG_EXT3_FS=y
-CONFIG_EXT4_FS=y
 CONFIG_MSDOS_FS=y
 CONFIG_VFAT_FS=y
 CONFIG_NTFS_FS=y
 CONFIG_TMPFS=y
-CONFIG_JFFS2_FS=y
 CONFIG_NFS_FS=y
 CONFIG_NLS_CODEPAGE_437=y
 CONFIG_NLS_ISO8859_1=y

arch/arc/configs/nsim_700_defconfig

@@ -4,6 +4,7 @@ CONFIG_DEFAULT_HOSTNAME="ARCLinux"
 # CONFIG_SWAP is not set
 CONFIG_SYSVIPC=y
 CONFIG_POSIX_MQUEUE=y
+# CONFIG_CROSS_MEMORY_ATTACH is not set
 CONFIG_HIGH_RES_TIMERS=y
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
@@ -26,7 +27,6 @@ CONFIG_ARC_PLAT_SIM=y
 CONFIG_ARC_BUILTIN_DTB_NAME="nsim_700"
 CONFIG_PREEMPT=y
 # CONFIG_COMPACTION is not set
-# CONFIG_CROSS_MEMORY_ATTACH is not set
 CONFIG_NET=y
 CONFIG_PACKET=y
 CONFIG_UNIX=y
@@ -34,6 +34,7 @@ CONFIG_UNIX_DIAG=y
 CONFIG_NET_KEY=y
 CONFIG_INET=y
 # CONFIG_IPV6 is not set
+CONFIG_DEVTMPFS=y
 # CONFIG_STANDALONE is not set
 # CONFIG_PREVENT_FIRMWARE_BUILD is not set
 # CONFIG_FIRMWARE_IN_KERNEL is not set
@@ -51,7 +52,6 @@ CONFIG_SERIAL_ARC=y
 CONFIG_SERIAL_ARC_CONSOLE=y
 # CONFIG_HW_RANDOM is not set
 # CONFIG_HWMON is not set
-# CONFIG_VGA_CONSOLE is not set
 # CONFIG_HID is not set
 # CONFIG_USB_SUPPORT is not set
 # CONFIG_IOMMU_SUPPORT is not set
@@ -63,4 +63,3 @@ CONFIG_NFS_FS=y
 # CONFIG_ENABLE_WARN_DEPRECATED is not set
 # CONFIG_ENABLE_MUST_CHECK is not set
 # CONFIG_DEBUG_PREEMPT is not set
-CONFIG_XZ_DEC=y

arch/arc/configs/nsim_hs_defconfig

@@ -35,6 +35,7 @@ CONFIG_UNIX_DIAG=y
 CONFIG_NET_KEY=y
 CONFIG_INET=y
 # CONFIG_IPV6 is not set
+CONFIG_DEVTMPFS=y
 # CONFIG_STANDALONE is not set
 # CONFIG_PREVENT_FIRMWARE_BUILD is not set
 # CONFIG_FIRMWARE_IN_KERNEL is not set
@@ -49,7 +50,6 @@ CONFIG_SERIAL_ARC=y
 CONFIG_SERIAL_ARC_CONSOLE=y
 # CONFIG_HW_RANDOM is not set
 # CONFIG_HWMON is not set
-# CONFIG_VGA_CONSOLE is not set
 # CONFIG_HID is not set
 # CONFIG_USB_SUPPORT is not set
 # CONFIG_IOMMU_SUPPORT is not set
@@ -61,4 +61,3 @@ CONFIG_NFS_FS=y
 # CONFIG_ENABLE_WARN_DEPRECATED is not set
 # CONFIG_ENABLE_MUST_CHECK is not set
 # CONFIG_DEBUG_PREEMPT is not set
-CONFIG_XZ_DEC=y

arch/arc/configs/nsim_hs_smp_defconfig

@@ -2,6 +2,7 @@ CONFIG_CROSS_COMPILE="arc-linux-"
 # CONFIG_LOCALVERSION_AUTO is not set
 CONFIG_DEFAULT_HOSTNAME="ARCLinux"
 # CONFIG_SWAP is not set
+# CONFIG_CROSS_MEMORY_ATTACH is not set
 CONFIG_HIGH_RES_TIMERS=y
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
@@ -21,13 +22,11 @@ CONFIG_MODULES=y
 # CONFIG_IOSCHED_DEADLINE is not set
 # CONFIG_IOSCHED_CFQ is not set
 CONFIG_ARC_PLAT_SIM=y
-CONFIG_ARC_BOARD_ML509=y
 CONFIG_ISA_ARCV2=y
 CONFIG_SMP=y
 CONFIG_ARC_BUILTIN_DTB_NAME="nsim_hs_idu"
 CONFIG_PREEMPT=y
 # CONFIG_COMPACTION is not set
-# CONFIG_CROSS_MEMORY_ATTACH is not set
 CONFIG_NET=y
 CONFIG_PACKET=y
 CONFIG_UNIX=y
@@ -35,6 +34,7 @@ CONFIG_UNIX_DIAG=y
 CONFIG_NET_KEY=y
 CONFIG_INET=y
 # CONFIG_IPV6 is not set
+CONFIG_DEVTMPFS=y
 # CONFIG_STANDALONE is not set
 # CONFIG_PREVENT_FIRMWARE_BUILD is not set
 # CONFIG_FIRMWARE_IN_KERNEL is not set
@@ -49,7 +49,6 @@ CONFIG_SERIAL_ARC=y
 CONFIG_SERIAL_ARC_CONSOLE=y
 # CONFIG_HW_RANDOM is not set
 # CONFIG_HWMON is not set
-# CONFIG_VGA_CONSOLE is not set
 # CONFIG_HID is not set
 # CONFIG_USB_SUPPORT is not set
 # CONFIG_IOMMU_SUPPORT is not set
@@ -60,4 +59,3 @@ CONFIG_TMPFS=y
 CONFIG_NFS_FS=y
 # CONFIG_ENABLE_WARN_DEPRECATED is not set
 # CONFIG_ENABLE_MUST_CHECK is not set
-CONFIG_XZ_DEC=y

arch/arc/configs/nsimosci_defconfig

@@ -33,6 +33,7 @@ CONFIG_UNIX_DIAG=y
 CONFIG_NET_KEY=y
 CONFIG_INET=y
 # CONFIG_IPV6 is not set
+CONFIG_DEVTMPFS=y
 # CONFIG_STANDALONE is not set
 # CONFIG_PREVENT_FIRMWARE_BUILD is not set
 # CONFIG_FIRMWARE_IN_KERNEL is not set
@@ -58,7 +59,6 @@ CONFIG_SERIAL_OF_PLATFORM=y
 # CONFIG_HW_RANDOM is not set
 # CONFIG_HWMON is not set
 CONFIG_FB=y
-# CONFIG_VGA_CONSOLE is not set
 CONFIG_FRAMEBUFFER_CONSOLE=y
 CONFIG_LOGO=y
 # CONFIG_HID is not set

arch/arc/configs/nsimosci_hs_defconfig

@@ -34,12 +34,12 @@ CONFIG_UNIX_DIAG=y
 CONFIG_NET_KEY=y
 CONFIG_INET=y
 # CONFIG_IPV6 is not set
+CONFIG_DEVTMPFS=y
 # CONFIG_STANDALONE is not set
 # CONFIG_PREVENT_FIRMWARE_BUILD is not set
 # CONFIG_FIRMWARE_IN_KERNEL is not set
 # CONFIG_BLK_DEV is not set
 CONFIG_NETDEVICES=y
-CONFIG_NET_OSCI_LAN=y
 CONFIG_INPUT_EVDEV=y
 # CONFIG_MOUSE_PS2_ALPS is not set
 # CONFIG_MOUSE_PS2_LOGIPS2PP is not set
@@ -58,7 +58,6 @@ CONFIG_SERIAL_OF_PLATFORM=y
 # CONFIG_HW_RANDOM is not set
 # CONFIG_HWMON is not set
 CONFIG_FB=y
-# CONFIG_VGA_CONSOLE is not set
 CONFIG_FRAMEBUFFER_CONSOLE=y
 CONFIG_LOGO=y
 # CONFIG_HID is not set

arch/arc/configs/nsimosci_hs_smp_defconfig

@@ -2,6 +2,7 @@ CONFIG_CROSS_COMPILE="arc-linux-"
 CONFIG_DEFAULT_HOSTNAME="ARCLinux"
 # CONFIG_SWAP is not set
 CONFIG_SYSVIPC=y
+# CONFIG_CROSS_MEMORY_ATTACH is not set
 CONFIG_NO_HZ=y
 CONFIG_HIGH_RES_TIMERS=y
 CONFIG_IKCONFIG=y
@@ -18,15 +19,11 @@ CONFIG_MODULES=y
 # CONFIG_IOSCHED_DEADLINE is not set
 # CONFIG_IOSCHED_CFQ is not set
 CONFIG_ARC_PLAT_SIM=y
-CONFIG_ARC_BOARD_ML509=y
 CONFIG_ISA_ARCV2=y
 CONFIG_SMP=y
-CONFIG_ARC_HAS_LL64=y
-# CONFIG_ARC_HAS_RTSC is not set
 CONFIG_ARC_BUILTIN_DTB_NAME="nsimosci_hs_idu"
 CONFIG_PREEMPT=y
 # CONFIG_COMPACTION is not set
-# CONFIG_CROSS_MEMORY_ATTACH is not set
 CONFIG_NET=y
 CONFIG_PACKET=y
 CONFIG_PACKET_DIAG=y
@@ -40,6 +37,7 @@ CONFIG_INET=y
 # CONFIG_INET_LRO is not set
 # CONFIG_IPV6 is not set
 # CONFIG_WIRELESS is not set
+CONFIG_DEVTMPFS=y
 # CONFIG_STANDALONE is not set
 # CONFIG_PREVENT_FIRMWARE_BUILD is not set
 # CONFIG_FIRMWARE_IN_KERNEL is not set
@@ -56,14 +54,11 @@ CONFIG_NETDEVICES=y
 # CONFIG_NET_VENDOR_STMICRO is not set
 # CONFIG_NET_VENDOR_VIA is not set
 # CONFIG_NET_VENDOR_WIZNET is not set
-CONFIG_NET_OSCI_LAN=y
 # CONFIG_WLAN is not set
 CONFIG_INPUT_EVDEV=y
 CONFIG_MOUSE_PS2_TOUCHKIT=y
 # CONFIG_SERIO_SERPORT is not set
-CONFIG_SERIO_LIBPS2=y
 CONFIG_SERIO_ARC_PS2=y
-CONFIG_VT_HW_CONSOLE_BINDING=y
 # CONFIG_LEGACY_PTYS is not set
 # CONFIG_DEVKMEM is not set
 CONFIG_SERIAL_8250=y
@@ -75,9 +70,6 @@ CONFIG_SERIAL_OF_PLATFORM=y
 # CONFIG_HW_RANDOM is not set
 # CONFIG_HWMON is not set
 CONFIG_FB=y
-CONFIG_ARCPGU_RGB888=y
-CONFIG_ARCPGU_DISPTYPE=0
-# CONFIG_VGA_CONSOLE is not set
 CONFIG_FRAMEBUFFER_CONSOLE=y
 CONFIG_LOGO=y
 # CONFIG_HID is not set

arch/arc/configs/tb10x_defconfig

@@ -3,6 +3,7 @@ CONFIG_CROSS_COMPILE="arc-linux-"
 CONFIG_DEFAULT_HOSTNAME="tb10x"
 CONFIG_SYSVIPC=y
 CONFIG_POSIX_MQUEUE=y
+# CONFIG_CROSS_MEMORY_ATTACH is not set
 CONFIG_HIGH_RES_TIMERS=y
 CONFIG_BSD_PROCESS_ACCT=y
 CONFIG_BSD_PROCESS_ACCT_V3=y
@@ -26,12 +27,10 @@ CONFIG_MODULE_UNLOAD=y
 # CONFIG_BLOCK is not set
 CONFIG_ARC_PLAT_TB10X=y
 CONFIG_ARC_CACHE_LINE_SHIFT=5
-CONFIG_ARC_STACK_NONEXEC=y
 CONFIG_HZ=250
 CONFIG_ARC_BUILTIN_DTB_NAME="abilis_tb100_dvk"
 CONFIG_PREEMPT_VOLUNTARY=y
 # CONFIG_COMPACTION is not set
-# CONFIG_CROSS_MEMORY_ATTACH is not set
 CONFIG_NET=y
 CONFIG_PACKET=y
 CONFIG_UNIX=y
@@ -44,8 +43,8 @@ CONFIG_IP_MULTICAST=y
 # CONFIG_INET_DIAG is not set
 # CONFIG_IPV6 is not set
 # CONFIG_WIRELESS is not set
+CONFIG_DEVTMPFS=y
 # CONFIG_FIRMWARE_IN_KERNEL is not set
-CONFIG_PROC_DEVICETREE=y
 CONFIG_NETDEVICES=y
 # CONFIG_NET_CADENCE is not set
 # CONFIG_NET_VENDOR_BROADCOM is not set
@@ -55,9 +54,6 @@ CONFIG_NETDEVICES=y
 # CONFIG_NET_VENDOR_NATSEMI is not set
 # CONFIG_NET_VENDOR_SEEQ is not set
 CONFIG_STMMAC_ETH=y
-CONFIG_STMMAC_DEBUG_FS=y
-CONFIG_STMMAC_DA=y
-CONFIG_STMMAC_CHAINED=y
 # CONFIG_NET_VENDOR_WIZNET is not set
 # CONFIG_WLAN is not set
 # CONFIG_INPUT is not set
@@ -91,7 +87,6 @@ CONFIG_LEDS_TRIGGER_DEFAULT_ON=y
 CONFIG_LEDS_TRIGGER_TRANSIENT=y
 CONFIG_DMADEVICES=y
 CONFIG_DW_DMAC=y
-CONFIG_NET_DMA=y
 CONFIG_ASYNC_TX_DMA=y
 # CONFIG_IOMMU_SUPPORT is not set
 # CONFIG_DNOTIFY is not set
@@ -100,17 +95,16 @@ CONFIG_TMPFS=y
 CONFIG_CONFIGFS_FS=y
 # CONFIG_MISC_FILESYSTEMS is not set
 # CONFIG_NETWORK_FILESYSTEMS is not set
+CONFIG_DEBUG_INFO=y
 # CONFIG_ENABLE_WARN_DEPRECATED is not set
-CONFIG_MAGIC_SYSRQ=y
 CONFIG_STRIP_ASM_SYMS=y
 CONFIG_DEBUG_FS=y
 CONFIG_HEADERS_CHECK=y
 CONFIG_DEBUG_SECTION_MISMATCH=y
+CONFIG_MAGIC_SYSRQ=y
+CONFIG_DEBUG_MEMORY_INIT=y
+CONFIG_DEBUG_STACKOVERFLOW=y
 CONFIG_DETECT_HUNG_TASK=y
 CONFIG_SCHEDSTATS=y
 CONFIG_TIMER_STATS=y
-CONFIG_DEBUG_INFO=y
-CONFIG_DEBUG_MEMORY_INIT=y
-CONFIG_DEBUG_STACKOVERFLOW=y
-# CONFIG_CRYPTO_ANSI_CPRNG is not set
 # CONFIG_CRYPTO_HW is not set

arch/arc/include/asm/arcregs.h

@@ -10,7 +10,8 @@
 #define _ASM_ARC_ARCREGS_H
 
 /* Build Configuration Registers */
-#define ARC_REG_DCCMBASE_BCR	0x61	/* DCCM Base Addr */
+#define ARC_REG_AUX_DCCM	0x18	/* DCCM Base Addr ARCv2 */
+#define ARC_REG_DCCM_BASE_BUILD	0x61	/* DCCM Base Addr ARCompact */
 #define ARC_REG_CRC_BCR		0x62
 #define ARC_REG_VECBASE_BCR	0x68
 #define ARC_REG_PERIBASE_BCR	0x69
@@ -18,10 +19,10 @@
 #define ARC_REG_DPFP_BCR	0x6C	/* ARCompact: Dbl Precision FPU */
 #define ARC_REG_FP_V2_BCR	0xc8	/* ARCv2 FPU */
 #define ARC_REG_SLC_BCR		0xce
-#define ARC_REG_DCCM_BCR	0x74	/* DCCM Present + SZ */
+#define ARC_REG_DCCM_BUILD	0x74	/* DCCM size (common) */
 #define ARC_REG_TIMERS_BCR	0x75
 #define ARC_REG_AP_BCR		0x76
-#define ARC_REG_ICCM_BCR	0x78
+#define ARC_REG_ICCM_BUILD	0x78	/* ICCM size (common) */
 #define ARC_REG_XY_MEM_BCR	0x79
 #define ARC_REG_MAC_BCR		0x7a
 #define ARC_REG_MUL_BCR		0x7b
@@ -36,6 +37,7 @@
 #define ARC_REG_IRQ_BCR		0xF3
 #define ARC_REG_SMART_BCR	0xFF
 #define ARC_REG_CLUSTER_BCR	0xcf
+#define ARC_REG_AUX_ICCM	0x208	/* ICCM Base Addr (ARCv2) */
 
 /* status32 Bits Positions */
 #define STATUS_AE_BIT		5	/* Exception active */
@@ -246,7 +248,7 @@ struct bcr_perip {
 #endif
 };
 
-struct bcr_iccm {
+struct bcr_iccm_arcompact {
 #ifdef CONFIG_CPU_BIG_ENDIAN
 	unsigned int base:16, pad:5, sz:3, ver:8;
 #else
@@ -254,17 +256,15 @@ struct bcr_iccm {
 #endif
 };
 
-/* DCCM Base Address Register: ARC_REG_DCCMBASE_BCR */
-struct bcr_dccm_base {
+struct bcr_iccm_arcv2 {
 #ifdef CONFIG_CPU_BIG_ENDIAN
-	unsigned int addr:24, ver:8;
+	unsigned int pad:8, sz11:4, sz01:4, sz10:4, sz00:4, ver:8;
 #else
-	unsigned int ver:8, addr:24;
+	unsigned int ver:8, sz00:4, sz10:4, sz01:4, sz11:4, pad:8;
 #endif
 };
 
-/* DCCM RAM Configuration Register: ARC_REG_DCCM_BCR */
-struct bcr_dccm {
+struct bcr_dccm_arcompact {
 #ifdef CONFIG_CPU_BIG_ENDIAN
 	unsigned int res:21, sz:3, ver:8;
 #else
@@ -272,6 +272,14 @@ struct bcr_dccm {
 #endif
 };
 
+struct bcr_dccm_arcv2 {
+#ifdef CONFIG_CPU_BIG_ENDIAN
+	unsigned int pad2:12, cyc:3, pad1:1, sz1:4, sz0:4, ver:8;
+#else
+	unsigned int ver:8, sz0:4, sz1:4, pad1:1, cyc:3, pad2:12;
+#endif
+};
+
 /* ARCompact: Both SP and DP FPU BCRs have same format */
 struct bcr_fp_arcompact {
 #ifdef CONFIG_CPU_BIG_ENDIAN
@@ -315,9 +323,9 @@ struct bcr_bpu_arcv2 {
 
 struct bcr_generic {
 #ifdef CONFIG_CPU_BIG_ENDIAN
-	unsigned int pad:24, ver:8;
+	unsigned int info:24, ver:8;
 #else
-	unsigned int ver:8, pad:24;
+	unsigned int ver:8, info:24;
 #endif
 };
 

arch/arc/include/asm/irq.h

@@ -16,11 +16,9 @@
 #ifdef CONFIG_ISA_ARCOMPACT
 #define TIMER0_IRQ      3
 #define TIMER1_IRQ      4
-#define IPI_IRQ		(NR_CPU_IRQS-1) /* dummy to enable SMP build for up hardware */
 #else
 #define TIMER0_IRQ      16
 #define TIMER1_IRQ      17
-#define IPI_IRQ         19
 #endif
 
 #include <linux/interrupt.h>

arch/arc/include/asm/irqflags-arcv2.h

@@ -22,6 +22,7 @@
 #define AUX_IRQ_CTRL		0x00E
 #define AUX_IRQ_ACT		0x043	/* Active Intr across all levels */
 #define AUX_IRQ_LVL_PEND	0x200	/* Pending Intr across all levels */
+#define AUX_IRQ_HINT		0x201	/* For generating Soft Interrupts */
 #define AUX_IRQ_PRIORITY	0x206
 #define ICAUSE			0x40a
 #define AUX_IRQ_SELECT		0x40b
@@ -115,6 +116,16 @@ static inline int arch_irqs_disabled(void)
 	return arch_irqs_disabled_flags(arch_local_save_flags());
 }
 
+static inline void arc_softirq_trigger(int irq)
+{
+	write_aux_reg(AUX_IRQ_HINT, irq);
+}
+
+static inline void arc_softirq_clear(int irq)
+{
+	write_aux_reg(AUX_IRQ_HINT, 0);
+}
+
 #else
 
 .macro IRQ_DISABLE  scratch

arch/arc/kernel/entry-arcv2.S

@@ -45,11 +45,12 @@ VECTOR	reserved		; Reserved slots
 VECTOR	handle_interrupt	; (16) Timer0
 VECTOR	handle_interrupt	; unused (Timer1)
 VECTOR	handle_interrupt	; unused (WDT)
-VECTOR	handle_interrupt	; (19) ICI (inter core interrupt)
-VECTOR	handle_interrupt
-VECTOR	handle_interrupt
-VECTOR	handle_interrupt
-VECTOR	handle_interrupt	; (23) End of fixed IRQs
+VECTOR	handle_interrupt	; (19) Inter core Interrupt (IPI)
+VECTOR	handle_interrupt	; (20) perf Interrupt
+VECTOR	handle_interrupt	; (21) Software Triggered Intr (Self IPI)
+VECTOR	handle_interrupt	; unused
+VECTOR	handle_interrupt	; (23) unused
+# End of fixed IRQs
 
 .rept CONFIG_ARC_NUMBER_OF_INTERRUPTS - 8
 	VECTOR	handle_interrupt

arch/arc/kernel/intc-compact.c

@@ -81,9 +81,6 @@ static int arc_intc_domain_map(struct irq_domain *d, unsigned int irq,
 {
 	switch (irq) {
 	case TIMER0_IRQ:
-#ifdef CONFIG_SMP
-	case IPI_IRQ:
-#endif
 		irq_set_chip_and_handler(irq, &onchip_intc, handle_percpu_irq);
 		break;
 	default:

arch/arc/kernel/mcip.c

@@ -11,9 +11,13 @@
 #include <linux/smp.h>
 #include <linux/irq.h>
 #include <linux/spinlock.h>
+#include <asm/irqflags-arcv2.h>
 #include <asm/mcip.h>
 #include <asm/setup.h>
 
+#define IPI_IRQ		19
+#define SOFTIRQ_IRQ	21
+
 static char smp_cpuinfo_buf[128];
 static int idu_detected;
 
@@ -22,6 +26,7 @@ static DEFINE_RAW_SPINLOCK(mcip_lock);
 static void mcip_setup_per_cpu(int cpu)
 {
 	smp_ipi_irq_setup(cpu, IPI_IRQ);
+	smp_ipi_irq_setup(cpu, SOFTIRQ_IRQ);
 }
 
 static void mcip_ipi_send(int cpu)
@@ -29,46 +34,44 @@ static void mcip_ipi_send(int cpu)
 	unsigned long flags;
 	int ipi_was_pending;
 
+	/* ARConnect can only send IPI to others */
+	if (unlikely(cpu == raw_smp_processor_id())) {
+		arc_softirq_trigger(SOFTIRQ_IRQ);
+		return;
+	}
+
+	raw_spin_lock_irqsave(&mcip_lock, flags);
+
 	/*
-	 * NOTE: We must spin here if the other cpu hasn't yet
-	 * serviced a previous message. This can burn lots
-	 * of time, but we MUST follows this protocol or
-	 * ipi messages can be lost!!!
-	 * Also, we must release the lock in this loop because
-	 * the other side may get to this same loop and not
-	 * be able to ack -- thus causing deadlock.
+	 * If receiver already has a pending interrupt, elide sending this one.
+	 * Linux cross core calling works well with concurrent IPIs
+	 * coalesced into one
+	 * see arch/arc/kernel/smp.c: ipi_send_msg_one()
 	 */
+	__mcip_cmd(CMD_INTRPT_READ_STATUS, cpu);
+	ipi_was_pending = read_aux_reg(ARC_REG_MCIP_READBACK);
+	if (!ipi_was_pending)
+		__mcip_cmd(CMD_INTRPT_GENERATE_IRQ, cpu);
 
-	do {
-		raw_spin_lock_irqsave(&mcip_lock, flags);
-		__mcip_cmd(CMD_INTRPT_READ_STATUS, cpu);
-		ipi_was_pending = read_aux_reg(ARC_REG_MCIP_READBACK);
-		if (ipi_was_pending == 0)
-			break; /* break out but keep lock */
-		raw_spin_unlock_irqrestore(&mcip_lock, flags);
-	} while (1);
-
-	__mcip_cmd(CMD_INTRPT_GENERATE_IRQ, cpu);
 	raw_spin_unlock_irqrestore(&mcip_lock, flags);
-
-#ifdef CONFIG_ARC_IPI_DBG
-	if (ipi_was_pending)
-		pr_info("IPI ACK delayed from cpu %d\n", cpu);
-#endif
 }
 
 static void mcip_ipi_clear(int irq)
 {
 	unsigned int cpu, c;
 	unsigned long flags;
-	unsigned int __maybe_unused copy;
+
+	if (unlikely(irq == SOFTIRQ_IRQ)) {
+		arc_softirq_clear(irq);
+		return;
+	}
 
 	raw_spin_lock_irqsave(&mcip_lock, flags);
 
 	/* Who sent the IPI */
 	__mcip_cmd(CMD_INTRPT_CHECK_SOURCE, 0);
 
-	copy = cpu = read_aux_reg(ARC_REG_MCIP_READBACK);	/* 1,2,4,8... */
+	cpu = read_aux_reg(ARC_REG_MCIP_READBACK);	/* 1,2,4,8... */
 
 	/*
 	 * In rare case, multiple concurrent IPIs sent to same target can
@@ -82,12 +85,6 @@ static void mcip_ipi_clear(int irq)
 	} while (cpu);
 
 	raw_spin_unlock_irqrestore(&mcip_lock, flags);
-
-#ifdef CONFIG_ARC_IPI_DBG
-	if (c != __ffs(copy))
-		pr_info("IPIs from %x coalesced to %x\n",
-			copy, raw_smp_processor_id());
-#endif
 }
 
 static void mcip_probe_n_setup(void)
@@ -111,10 +108,11 @@ static void mcip_probe_n_setup(void)
 	READ_BCR(ARC_REG_MCIP_BCR, mp);
 
 	sprintf(smp_cpuinfo_buf,
-		"Extn [SMP]\t: ARConnect (v%d): %d cores with %s%s%s%s\n",
+		"Extn [SMP]\t: ARConnect (v%d): %d cores with %s%s%s%s%s\n",
 		mp.ver, mp.num_cores,
 		IS_AVAIL1(mp.ipi, "IPI "),
 		IS_AVAIL1(mp.idu, "IDU "),
+		IS_AVAIL1(mp.llm, "LLM "),
 		IS_AVAIL1(mp.dbg, "DEBUG "),
 		IS_AVAIL1(mp.gfrc, "GFRC"));
 

arch/arc/kernel/setup.c

@@ -42,6 +42,53 @@ struct task_struct *_current_task[NR_CPUS];	/* For stack switching */
 
 struct cpuinfo_arc cpuinfo_arc700[NR_CPUS];
 
+static void read_decode_ccm_bcr(struct cpuinfo_arc *cpu)
+{
+	if (is_isa_arcompact()) {
+		struct bcr_iccm_arcompact iccm;
+		struct bcr_dccm_arcompact dccm;
+
+		READ_BCR(ARC_REG_ICCM_BUILD, iccm);
+		if (iccm.ver) {
+			cpu->iccm.sz = 4096 << iccm.sz;	/* 8K to 512K */
+			cpu->iccm.base_addr = iccm.base << 16;
+		}
+
+		READ_BCR(ARC_REG_DCCM_BUILD, dccm);
+		if (dccm.ver) {
+			unsigned long base;
+			cpu->dccm.sz = 2048 << dccm.sz;	/* 2K to 256K */
+
+			base = read_aux_reg(ARC_REG_DCCM_BASE_BUILD);
+			cpu->dccm.base_addr = base & ~0xF;
+		}
+	} else {
+		struct bcr_iccm_arcv2 iccm;
+		struct bcr_dccm_arcv2 dccm;
+		unsigned long region;
+
+		READ_BCR(ARC_REG_ICCM_BUILD, iccm);
+		if (iccm.ver) {
+			cpu->iccm.sz = 256 << iccm.sz00;	/* 512B to 16M */
+			if (iccm.sz00 == 0xF && iccm.sz01 > 0)
+				cpu->iccm.sz <<= iccm.sz01;
+
+			region = read_aux_reg(ARC_REG_AUX_ICCM);
+			cpu->iccm.base_addr = region & 0xF0000000;
+		}
+
+		READ_BCR(ARC_REG_DCCM_BUILD, dccm);
+		if (dccm.ver) {
+			cpu->dccm.sz = 256 << dccm.sz0;
+			if (dccm.sz0 == 0xF && dccm.sz1 > 0)
+				cpu->dccm.sz <<= dccm.sz1;
+
+			region = read_aux_reg(ARC_REG_AUX_DCCM);
+			cpu->dccm.base_addr = region & 0xF0000000;
+		}
+	}
+}
+
 static void read_arc_build_cfg_regs(void)
 {
 	struct bcr_perip uncached_space;
@@ -76,36 +123,11 @@ static void read_arc_build_cfg_regs(void)
 	cpu->extn.swap = read_aux_reg(ARC_REG_SWAP_BCR) ? 1 : 0;        /* 1,3 */
 	cpu->extn.crc = read_aux_reg(ARC_REG_CRC_BCR) ? 1 : 0;
 	cpu->extn.minmax = read_aux_reg(ARC_REG_MIXMAX_BCR) > 1 ? 1 : 0; /* 2 */
-
-	/* Note that we read the CCM BCRs independent of kernel config
-	 * This is to catch the cases where user doesn't know that
-	 * CCMs are present in hardware build
-	 */
-	{
-		struct bcr_iccm iccm;
-		struct bcr_dccm dccm;
-		struct bcr_dccm_base dccm_base;
-		unsigned int bcr_32bit_val;
-
-		bcr_32bit_val = read_aux_reg(ARC_REG_ICCM_BCR);
-		if (bcr_32bit_val) {
-			iccm = *((struct bcr_iccm *)&bcr_32bit_val);
-			cpu->iccm.base_addr = iccm.base << 16;
-			cpu->iccm.sz = 0x2000 << (iccm.sz - 1);
-		}
-
-		bcr_32bit_val = read_aux_reg(ARC_REG_DCCM_BCR);
-		if (bcr_32bit_val) {
-			dccm = *((struct bcr_dccm *)&bcr_32bit_val);
-			cpu->dccm.sz = 0x800 << (dccm.sz);
-
-			READ_BCR(ARC_REG_DCCMBASE_BCR, dccm_base);
-			cpu->dccm.base_addr = dccm_base.addr << 8;
-		}
-	}
-
 	READ_BCR(ARC_REG_XY_MEM_BCR, cpu->extn_xymem);
 
+	/* Read CCM BCRs for boot reporting even if not enabled in Kconfig */
+	read_decode_ccm_bcr(cpu);
+
 	read_decode_mmu_bcr();
 	read_decode_cache_bcr();
 
@@ -237,8 +259,6 @@ static char *arc_cpu_mumbojumbo(int cpu_id, char *buf, int len)
 
 			n += scnprintf(buf + n, len - n, "mpy[opt %d] ", opt);
 		}
-		n += scnprintf(buf + n, len - n, "%s",
-			       IS_USED_CFG(CONFIG_ARC_HAS_HW_MPY));
 	}
 
 	n += scnprintf(buf + n, len - n, "%s%s%s%s%s%s%s%s\n",

arch/arc/kernel/smp.c

@@ -336,11 +336,8 @@ irqreturn_t do_IPI(int irq, void *dev_id)
 		int rc;
 
 		rc = __do_IPI(msg);
-#ifdef CONFIG_ARC_IPI_DBG
-		/* IPI received but no valid @msg */
 		if (rc)
 			pr_info("IPI with bogus msg %ld in %ld\n", msg, copy);
-#endif
 		pending &= ~(1U << msg);
 	} while (pending);
 

arch/arm/boot/compressed/Makefile

@@ -195,5 +195,7 @@ CFLAGS_font.o := -Dstatic=
 $(obj)/font.c: $(FONTC)
 	$(call cmd,shipped)
 
+AFLAGS_hyp-stub.o := -Wa,-march=armv7-a
+
 $(obj)/hyp-stub.S: $(srctree)/arch/$(SRCARCH)/kernel/hyp-stub.S
 	$(call cmd,shipped)

arch/arm/boot/dts/am335x-bone-common.dtsi

@@ -285,8 +285,10 @@
 	};
 };
 
+
+/include/ "tps65217.dtsi"
+
 &tps {
-	compatible = "ti,tps65217";
 	/*
 	 * Configure pmic to enter OFF-state instead of SLEEP-state ("RTC-only
 	 * mode") at poweroff.  Most BeagleBone versions do not support RTC-only
@@ -307,17 +309,12 @@
 	ti,pmic-shutdown-controller;
 
 	regulators {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
 		dcdc1_reg: regulator@0 {
-			reg = <0>;
 			regulator-name = "vdds_dpr";
 			regulator-always-on;
 		};
 
 		dcdc2_reg: regulator@1 {
-			reg = <1>;
 			/* VDD_MPU voltage limits 0.95V - 1.26V with +/-4% tolerance */
 			regulator-name = "vdd_mpu";
 			regulator-min-microvolt = <925000>;
@@ -327,7 +324,6 @@
 		};
 
 		dcdc3_reg: regulator@2 {
-			reg = <2>;
 			/* VDD_CORE voltage limits 0.95V - 1.1V with +/-4% tolerance */
 			regulator-name = "vdd_core";
 			regulator-min-microvolt = <925000>;
@@ -337,25 +333,21 @@
 		};
 
 		ldo1_reg: regulator@3 {
-			reg = <3>;
 			regulator-name = "vio,vrtc,vdds";
 			regulator-always-on;
 		};
 
 		ldo2_reg: regulator@4 {
-			reg = <4>;
 			regulator-name = "vdd_3v3aux";
 			regulator-always-on;
 		};
 
 		ldo3_reg: regulator@5 {
-			reg = <5>;
 			regulator-name = "vdd_1v8";
 			regulator-always-on;
 		};
 
 		ldo4_reg: regulator@6 {
-			reg = <6>;
 			regulator-name = "vdd_3v3a";
 			regulator-always-on;
 		};

arch/arm/boot/dts/am335x-chilisom.dtsi

@@ -128,21 +128,16 @@
 
 };
 
-&tps {
-	compatible = "ti,tps65217";
+/include/ "tps65217.dtsi"
 
+&tps {
 	regulators {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
 		dcdc1_reg: regulator@0 {
-			reg = <0>;
 			regulator-name = "vdds_dpr";
 			regulator-always-on;
 		};
 
 		dcdc2_reg: regulator@1 {
-			reg = <1>;
 			/* VDD_MPU voltage limits 0.95V - 1.26V with +/-4% tolerance */
 			regulator-name = "vdd_mpu";
 			regulator-min-microvolt = <925000>;
@@ -152,7 +147,6 @@
 		};
 
 		dcdc3_reg: regulator@2 {
-			reg = <2>;
 			/* VDD_CORE voltage limits 0.95V - 1.1V with +/-4% tolerance */
 			regulator-name = "vdd_core";
 			regulator-min-microvolt = <925000>;
@@ -162,28 +156,24 @@
 		};
 
 		ldo1_reg: regulator@3 {
-			reg = <3>;
 			regulator-name = "vio,vrtc,vdds";
 			regulator-boot-on;
 			regulator-always-on;
 		};
 
 		ldo2_reg: regulator@4 {
-			reg = <4>;
 			regulator-name = "vdd_3v3aux";
 			regulator-boot-on;
 			regulator-always-on;
 		};
 
 		ldo3_reg: regulator@5 {
-			reg = <5>;
 			regulator-name = "vdd_1v8";
 			regulator-boot-on;
 			regulator-always-on;
 		};
 
 		ldo4_reg: regulator@6 {
-			reg = <6>;
 			regulator-name = "vdd_3v3d";
 			regulator-boot-on;
 			regulator-always-on;

arch/arm/boot/dts/am335x-nano.dts

@@ -375,15 +375,11 @@
 	wp-gpios = <&gpio3 18 0>;
 };
 
-&tps {
-	compatible = "ti,tps65217";
+#include "tps65217.dtsi"
 
+&tps {
 	regulators {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
 		dcdc1_reg: regulator@0 {
-			reg = <0>;
 			/* +1.5V voltage with ±4% tolerance */
 			regulator-min-microvolt = <1450000>;
 			regulator-max-microvolt = <1550000>;
@@ -392,7 +388,6 @@
 		};
 
 		dcdc2_reg: regulator@1 {
-			reg = <1>;
 			/* VDD_MPU voltage limits 0.95V - 1.1V with ±4% tolerance */
 			regulator-name = "vdd_mpu";
 			regulator-min-microvolt = <915000>;
@@ -402,7 +397,6 @@
 		};
 
 		dcdc3_reg: regulator@2 {
-			reg = <2>;
 			/* VDD_CORE voltage limits 0.95V - 1.1V with ±4% tolerance */
 			regulator-name = "vdd_core";
 			regulator-min-microvolt = <915000>;
@@ -412,7 +406,6 @@
 		};
 
 		ldo1_reg: regulator@3 {
-			reg = <3>;
 			/* +1.8V voltage with ±4% tolerance */
 			regulator-min-microvolt = <1750000>;
 			regulator-max-microvolt = <1870000>;
@@ -421,7 +414,6 @@
 		};
 
 		ldo2_reg: regulator@4 {
-			reg = <4>;
 			/* +3.3V voltage with ±4% tolerance */
 			regulator-min-microvolt = <3175000>;
 			regulator-max-microvolt = <3430000>;
@@ -430,7 +422,6 @@
 		};
 
 		ldo3_reg: regulator@5 {
-			reg = <5>;
 			/* +1.8V voltage with ±4% tolerance */
 			regulator-min-microvolt = <1750000>;
 			regulator-max-microvolt = <1870000>;
@@ -439,7 +430,6 @@
 		};
 
 		ldo4_reg: regulator@6 {
-			reg = <6>;
 			/* +3.3V voltage with ±4% tolerance */
 			regulator-min-microvolt = <3175000>;
 			regulator-max-microvolt = <3430000>;

arch/arm/boot/dts/am335x-pepper.dts

@@ -420,9 +420,9 @@
 	vin-supply = <&vbat>;
 };
 
-&tps {
-	compatible = "ti,tps65217";
+/include/ "tps65217.dtsi"
 
+&tps {
 	backlight {
 		isel = <1>; /* ISET1 */
 		fdim = <200>; /* TPS65217_BL_FDIM_200HZ */
@@ -430,17 +430,12 @@
 	};
 
 	regulators {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
 		dcdc1_reg: regulator@0 {
-			reg = <0>;
 			/* VDD_1V8 system supply */
 			regulator-always-on;
 		};
 
 		dcdc2_reg: regulator@1 {
-			reg = <1>;
 			/* VDD_CORE voltage limits 0.95V - 1.26V with +/-4% tolerance */
 			regulator-name = "vdd_core";
 			regulator-min-microvolt = <925000>;
@@ -450,7 +445,6 @@
 		};
 
 		dcdc3_reg: regulator@2 {
-			reg = <2>;
 			/* VDD_MPU voltage limits 0.95V - 1.1V with +/-4% tolerance */
 			regulator-name = "vdd_mpu";
 			regulator-min-microvolt = <925000>;
@@ -460,21 +454,18 @@
 		};
 
 		ldo1_reg: regulator@3 {
-			reg = <3>;
 			/* VRTC 1.8V always-on supply */
 			regulator-name = "vrtc,vdds";
 			regulator-always-on;
 		};
 
 		ldo2_reg: regulator@4 {
-			reg = <4>;
 			/* 3.3V rail */
 			regulator-name = "vdd_3v3aux";
 			regulator-always-on;
 		};
 
 		ldo3_reg: regulator@5 {
-			reg = <5>;
 			/* VDD_3V3A 3.3V rail */
 			regulator-name = "vdd_3v3a";
 			regulator-min-microvolt = <3300000>;
@@ -482,7 +473,6 @@
 		};
 
 		ldo4_reg: regulator@6 {
-			reg = <6>;
 			/* VDD_3V3B 3.3V rail */
 			regulator-name = "vdd_3v3b";
 			regulator-always-on;

arch/arm/boot/dts/am335x-shc.dts

@@ -46,7 +46,7 @@
 			gpios = <&gpio1 29 GPIO_ACTIVE_HIGH>;
 			linux,code = <KEY_BACK>;
 			debounce-interval = <1000>;
-			gpio-key,wakeup;
+			wakeup-source;
 		};
 
 		front_button {
@@ -54,7 +54,7 @@
 			gpios = <&gpio1 25 GPIO_ACTIVE_HIGH>;
 			linux,code = <KEY_FRONT>;
 			debounce-interval = <1000>;
-			gpio-key,wakeup;
+			wakeup-source;
 		};
 	};
 

arch/arm/boot/dts/am335x-sl50.dts

@@ -375,19 +375,16 @@
 	pinctrl-0 = <&uart4_pins>;
 };
 
+#include "tps65217.dtsi"
+
 &tps {
-	compatible = "ti,tps65217";
 	ti,pmic-shutdown-controller;
 
 	interrupt-parent = <&intc>;
 	interrupts = <7>;	/* NNMI */
 
 	regulators {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
 		dcdc1_reg: regulator@0 {
-			reg = <0>;
 			/* VDDS_DDR */
 			regulator-min-microvolt = <1500000>;
 			regulator-max-microvolt = <1500000>;
@@ -395,7 +392,6 @@
 		};
 
 		dcdc2_reg: regulator@1 {
-			reg = <1>;
 			/* VDD_MPU voltage limits 0.95V - 1.26V with +/-4% tolerance */
 			regulator-name = "vdd_mpu";
 			regulator-min-microvolt = <925000>;
@@ -405,7 +401,6 @@
 		};
 
 		dcdc3_reg: regulator@2 {
-			reg = <2>;
 			/* VDD_CORE voltage limits 0.95V - 1.1V with +/-4% tolerance */
 			regulator-name = "vdd_core";
 			regulator-min-microvolt = <925000>;
@@ -415,7 +410,6 @@
 		};
 
 		ldo1_reg: regulator@3 {
-			reg = <3>;
 			/* VRTC / VIO / VDDS*/
 			regulator-always-on;
 			regulator-min-microvolt = <1800000>;
@@ -423,7 +417,6 @@
 		};
 
 		ldo2_reg: regulator@4 {
-			reg = <4>;
 			/* VDD_3V3AUX */
 			regulator-always-on;
 			regulator-min-microvolt = <3300000>;
@@ -431,7 +424,6 @@
 		};
 
 		ldo3_reg: regulator@5 {
-			reg = <5>;
 			/* VDD_1V8 */
 			regulator-min-microvolt = <1800000>;
 			regulator-max-microvolt = <1800000>;
@@ -439,7 +431,6 @@
 		};
 
 		ldo4_reg: regulator@6 {
-			reg = <6>;
 			/* VDD_3V3A */
 			regulator-min-microvolt = <3300000>;
 			regulator-max-microvolt = <3300000>;

arch/arm/boot/dts/am57xx-beagle-x15.dts

@@ -173,6 +173,8 @@
 
 		sound0_master: simple-audio-card,codec {
 			sound-dai = <&tlv320aic3104>;
+			assigned-clocks = <&clkoutmux2_clk_mux>;
+			assigned-clock-parents = <&sys_clk2_dclk_div>;
 			clocks = <&clkout2_clk>;
 		};
 	};
@@ -796,6 +798,8 @@
 	pinctrl-names = "default", "sleep";
 	pinctrl-0 = <&mcasp3_pins_default>;
 	pinctrl-1 = <&mcasp3_pins_sleep>;
+	assigned-clocks = <&mcasp3_ahclkx_mux>;
+	assigned-clock-parents = <&sys_clkin2>;
 	status = "okay";
 
 	op-mode = <0>;	/* MCASP_IIS_MODE */

arch/arm/boot/dts/am57xx-cl-som-am57x.dts

@@ -545,7 +545,7 @@
 		ti,debounce-tol = /bits/ 16 <10>;
 		ti,debounce-rep = /bits/ 16 <1>;
 
-		linux,wakeup;
+		wakeup-source;
 	};
 };
 

arch/arm/boot/dts/imx6qdl.dtsi

@@ -896,7 +896,6 @@
 				#size-cells = <1>;
 				reg = <0x2100000 0x10000>;
 				ranges = <0 0x2100000 0x10000>;
-				interrupt-parent = <&intc>;
 				clocks = <&clks IMX6QDL_CLK_CAAM_MEM>,
 					 <&clks IMX6QDL_CLK_CAAM_ACLK>,
 					 <&clks IMX6QDL_CLK_CAAM_IPG>,

arch/arm/boot/dts/kirkwood-ds112.dts

@@ -14,7 +14,7 @@
 #include "kirkwood-synology.dtsi"
 
 / {
-	model = "Synology DS111";
+	model = "Synology DS112";
 	compatible = "synology,ds111", "marvell,kirkwood";
 
 	memory {

arch/arm/boot/dts/orion5x-linkstation-lswtgl.dts

@@ -228,6 +228,37 @@
 	};
 };
 
+&devbus_bootcs {
+	status = "okay";
+	devbus,keep-config;
+
+	flash@0 {
+		compatible = "jedec-flash";
+		reg = <0 0x40000>;
+		bank-width = <1>;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			header@0 {
+				reg = <0 0x30000>;
+				read-only;
+			};
+
+			uboot@30000 {
+				reg = <0x30000 0xF000>;
+				read-only;
+			};
+
+			uboot_env@3F000 {
+				reg = <0x3F000 0x1000>;
+			};
+		};
+	};
+};
+
 &mdio {
 	status = "okay";
 

arch/arm/boot/dts/r8a7791-porter.dts

@@ -283,7 +283,6 @@
 	pinctrl-names = "default";
 
 	status = "okay";
-	renesas,enable-gpio = <&gpio5 31 GPIO_ACTIVE_HIGH>;
 };
 
 &usbphy {

arch/arm/boot/dts/sama5d2-pinfunc.h

@@ -90,7 +90,7 @@
 #define PIN_PA14__I2SC1_MCK		PINMUX_PIN(PIN_PA14, 4, 2)
 #define PIN_PA14__FLEXCOM3_IO2		PINMUX_PIN(PIN_PA14, 5, 1)
 #define PIN_PA14__D9			PINMUX_PIN(PIN_PA14, 6, 2)
-#define PIN_PA15			14
+#define PIN_PA15			15
 #define PIN_PA15__GPIO			PINMUX_PIN(PIN_PA15, 0, 0)
 #define PIN_PA15__SPI0_MOSI		PINMUX_PIN(PIN_PA15, 1, 1)
 #define PIN_PA15__TF1			PINMUX_PIN(PIN_PA15, 2, 1)

arch/arm/boot/dts/tps65217.dtsi

@@ -0,0 +1,56 @@
+/*
+ * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+/*
+ * Integrated Power Management Chip
+ * http://www.ti.com/lit/ds/symlink/tps65217.pdf
+ */
+
+&tps {
+	compatible = "ti,tps65217";
+
+	regulators {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		dcdc1_reg: regulator@0 {
+			reg = <0>;
+			regulator-compatible = "dcdc1";
+		};
+
+		dcdc2_reg: regulator@1 {
+			reg = <1>;
+			regulator-compatible = "dcdc2";
+		};
+
+		dcdc3_reg: regulator@2 {
+			reg = <2>;
+			regulator-compatible = "dcdc3";
+		};
+
+		ldo1_reg: regulator@3 {
+			reg = <3>;
+			regulator-compatible = "ldo1";
+		};
+
+		ldo2_reg: regulator@4 {
+			reg = <4>;
+			regulator-compatible = "ldo2";
+		};
+
+		ldo3_reg: regulator@5 {
+			reg = <5>;
+			regulator-compatible = "ldo3";
+		};
+
+		ldo4_reg: regulator@6 {
+			reg = <6>;
+			regulator-compatible = "ldo4";
+		};
+	};
+};

arch/arm/include/asm/arch_gicv3.h

@@ -117,6 +117,7 @@ static inline u32 gic_read_iar(void)
 	u32 irqstat;
 
 	asm volatile("mrc " __stringify(ICC_IAR1) : "=r" (irqstat));
+	dsb(sy);
 	return irqstat;
 }
 

arch/arm/include/asm/xen/page-coherent.h

@@ -35,14 +35,21 @@ static inline void xen_dma_map_page(struct device *hwdev, struct page *page,
 	     dma_addr_t dev_addr, unsigned long offset, size_t size,
 	     enum dma_data_direction dir, struct dma_attrs *attrs)
 {
-	bool local = XEN_PFN_DOWN(dev_addr) == page_to_xen_pfn(page);
+	unsigned long page_pfn = page_to_xen_pfn(page);
+	unsigned long dev_pfn = XEN_PFN_DOWN(dev_addr);
+	unsigned long compound_pages =
+		(1<<compound_order(page)) * XEN_PFN_PER_PAGE;
+	bool local = (page_pfn <= dev_pfn) &&
+		(dev_pfn - page_pfn < compound_pages);
+
 	/*
-	 * Dom0 is mapped 1:1, while the Linux page can be spanned accross
-	 * multiple Xen page, it's not possible to have a mix of local and
-	 * foreign Xen page. So if the first xen_pfn == mfn the page is local
-	 * otherwise it's a foreign page grant-mapped in dom0. If the page is
-	 * local we can safely call the native dma_ops function, otherwise we
-	 * call the xen specific function.
+	 * Dom0 is mapped 1:1, while the Linux page can span across
+	 * multiple Xen pages, it's not possible for it to contain a
+	 * mix of local and foreign Xen pages. So if the first xen_pfn
+	 * == mfn the page is local otherwise it's a foreign page
+	 * grant-mapped in dom0. If the page is local we can safely
+	 * call the native dma_ops function, otherwise we call the xen
+	 * specific function.
 	 */
 	if (local)
 		__generic_dma_ops(hwdev)->map_page(hwdev, page, offset, size, dir, attrs);

arch/arm/kernel/Makefile

@@ -88,6 +88,7 @@ obj-$(CONFIG_DEBUG_LL)	+= debug.o
 obj-$(CONFIG_EARLY_PRINTK)	+= early_printk.o
 
 obj-$(CONFIG_ARM_VIRT_EXT)	+= hyp-stub.o
+AFLAGS_hyp-stub.o		:=-Wa,-march=armv7-a
 ifeq ($(CONFIG_ARM_PSCI),y)
 obj-$(CONFIG_SMP)		+= psci_smp.o
 endif

arch/arm/kvm/guest.c

@@ -161,7 +161,7 @@ static int get_timer_reg(struct kvm_vcpu *vcpu, const struct kvm_one_reg *reg)
 	u64 val;
 
 	val = kvm_arm_timer_get_reg(vcpu, reg->id);
-	return copy_to_user(uaddr, &val, KVM_REG_SIZE(reg->id));
+	return copy_to_user(uaddr, &val, KVM_REG_SIZE(reg->id)) ? -EFAULT : 0;
 }
 
 static unsigned long num_core_regs(void)

arch/arm/kvm/mmio.c

@@ -206,7 +206,8 @@ int io_mem_abort(struct kvm_vcpu *vcpu, struct kvm_run *run,
 	run->mmio.is_write	= is_write;
 	run->mmio.phys_addr	= fault_ipa;
 	run->mmio.len		= len;
-	memcpy(run->mmio.data, data_buf, len);
+	if (is_write)
+		memcpy(run->mmio.data, data_buf, len);
 
 	if (!ret) {
 		/* We handled the access successfully in the kernel. */

arch/arm/mach-omap2/board-generic.c

@@ -18,6 +18,7 @@
 
 #include <asm/setup.h>
 #include <asm/mach/arch.h>
+#include <asm/system_info.h>
 
 #include "common.h"
 
@@ -77,12 +78,31 @@ static const char *const n900_boards_compat[] __initconst = {
 	NULL,
 };
 
+/* Set system_rev from atags */
+static void __init rx51_set_system_rev(const struct tag *tags)
+{
+	const struct tag *tag;
+
+	if (tags->hdr.tag != ATAG_CORE)
+		return;
+
+	for_each_tag(tag, tags) {
+		if (tag->hdr.tag == ATAG_REVISION) {
+			system_rev = tag->u.revision.rev;
+			break;
+		}
+	}
+}
+
 /* Legacy userspace on Nokia N900 needs ATAGS exported in /proc/atags,
  * save them while the data is still not overwritten
  */
 static void __init rx51_reserve(void)
 {
-	save_atags((const struct tag *)(PAGE_OFFSET + 0x100));
+	const struct tag *tags = (const struct tag *)(PAGE_OFFSET + 0x100);
+
+	save_atags(tags);
+	rx51_set_system_rev(tags);
 	omap_reserve();
 }
 

arch/arm/mach-omap2/gpmc-onenand.c

@@ -101,10 +101,8 @@ static void omap2_onenand_set_async_mode(void __iomem *onenand_base)
 
 static void set_onenand_cfg(void __iomem *onenand_base)
 {
-	u32 reg;
+	u32 reg = ONENAND_SYS_CFG1_RDY | ONENAND_SYS_CFG1_INT;
 
-	reg = readw(onenand_base + ONENAND_REG_SYS_CFG1);
-	reg &= ~((0x7 << ONENAND_SYS_CFG1_BRL_SHIFT) | (0x7 << 9));
 	reg |=	(latency << ONENAND_SYS_CFG1_BRL_SHIFT) |
 		ONENAND_SYS_CFG1_BL_16;
 	if (onenand_flags & ONENAND_FLAG_SYNCREAD)
@@ -123,6 +121,7 @@ static void set_onenand_cfg(void __iomem *onenand_base)
 		reg |= ONENAND_SYS_CFG1_VHF;
 	else
 		reg &= ~ONENAND_SYS_CFG1_VHF;
+
 	writew(reg, onenand_base + ONENAND_REG_SYS_CFG1);
 }
 
@@ -289,6 +288,7 @@ static int omap2_onenand_setup_async(void __iomem *onenand_base)
 		}
 	}
 
+	onenand_async.sync_write = true;
 	omap2_onenand_calc_async_timings(&t);
 
 	ret = gpmc_cs_program_settings(gpmc_onenand_data->cs, &onenand_async);

arch/arm/mach-omap2/omap_device.c

@@ -191,12 +191,22 @@ static int _omap_device_notifier_call(struct notifier_block *nb,
 {
 	struct platform_device *pdev = to_platform_device(dev);
 	struct omap_device *od;
+	int err;
 
 	switch (event) {
 	case BUS_NOTIFY_DEL_DEVICE:
 		if (pdev->archdata.od)
 			omap_device_delete(pdev->archdata.od);
 		break;
+	case BUS_NOTIFY_UNBOUND_DRIVER:
+		od = to_omap_device(pdev);
+		if (od && (od->_state == OMAP_DEVICE_STATE_ENABLED)) {
+			dev_info(dev, "enabled after unload, idling\n");
+			err = omap_device_idle(pdev);
+			if (err)
+				dev_err(dev, "failed to idle\n");
+		}
+		break;
 	case BUS_NOTIFY_ADD_DEVICE:
 		if (pdev->dev.of_node)
 			omap_device_build_from_dt(pdev);
@@ -602,8 +612,10 @@ static int _od_runtime_resume(struct device *dev)
 	int ret;
 
 	ret = omap_device_enable(pdev);
-	if (ret)
+	if (ret) {
+		dev_err(dev, "use pm_runtime_put_sync_suspend() in driver?\n");
 		return ret;
+	}
 
 	return pm_generic_runtime_resume(dev);
 }

arch/arm/mach-shmobile/common.h

@@ -4,7 +4,6 @@
 extern void shmobile_init_delay(void);
 extern void shmobile_boot_vector(void);
 extern unsigned long shmobile_boot_fn;
-extern unsigned long shmobile_boot_arg;
 extern unsigned long shmobile_boot_size;
 extern void shmobile_smp_boot(void);
 extern void shmobile_smp_sleep(void);

arch/arm/mach-shmobile/headsmp-scu.S

@@ -38,9 +38,3 @@ ENTRY(shmobile_boot_scu)
 
 	b	secondary_startup
 ENDPROC(shmobile_boot_scu)
-
-	.text
-	.align	2
-	.globl	shmobile_scu_base
-shmobile_scu_base:
-	.space	4

arch/arm/mach-shmobile/headsmp.S

@@ -24,7 +24,6 @@
 	.arm
 	.align  12
 ENTRY(shmobile_boot_vector)
-	ldr     r0, 2f
 	ldr     r1, 1f
 	bx	r1
 
@@ -34,9 +33,6 @@ ENDPROC(shmobile_boot_vector)
 	.globl	shmobile_boot_fn
 shmobile_boot_fn:
 1:	.space	4
-	.globl	shmobile_boot_arg
-shmobile_boot_arg:
-2:	.space	4
 	.globl	shmobile_boot_size
 shmobile_boot_size:
 	.long	. - shmobile_boot_vector
@@ -46,13 +42,15 @@ shmobile_boot_size:
  */
 
 ENTRY(shmobile_smp_boot)
-						@ r0 = MPIDR_HWID_BITMASK
 	mrc	p15, 0, r1, c0, c0, 5		@ r1 = MPIDR
-	and	r0, r1, r0			@ r0 = cpu_logical_map() value
+	and	r0, r1, #0xffffff		@ MPIDR_HWID_BITMASK
+						@ r0 = cpu_logical_map() value
 	mov	r1, #0				@ r1 = CPU index
-	adr	r5, 1f				@ array of per-cpu mpidr values
-	adr	r6, 2f				@ array of per-cpu functions
-	adr	r7, 3f				@ array of per-cpu arguments
+	adr	r2, 1f
+	ldmia	r2, {r5, r6, r7}
+	add	r5, r5, r2			@ array of per-cpu mpidr values
+	add	r6, r6, r2			@ array of per-cpu functions
+	add	r7, r7, r2			@ array of per-cpu arguments
 
 shmobile_smp_boot_find_mpidr:
 	ldr	r8, [r5, r1, lsl #2]
@@ -80,12 +78,18 @@ ENTRY(shmobile_smp_sleep)
 	b	shmobile_smp_boot
 ENDPROC(shmobile_smp_sleep)
 
+	.align	2
+1:	.long	shmobile_smp_mpidr - .
+	.long	shmobile_smp_fn - 1b
+	.long	shmobile_smp_arg - 1b
+
+	.bss
 	.globl	shmobile_smp_mpidr
 shmobile_smp_mpidr:
-1:	.space	NR_CPUS * 4
+	.space	NR_CPUS * 4
 	.globl	shmobile_smp_fn
 shmobile_smp_fn:
-2:	.space	NR_CPUS * 4
+	.space	NR_CPUS * 4
 	.globl	shmobile_smp_arg
 shmobile_smp_arg:
-3:	.space	NR_CPUS * 4
+	.space	NR_CPUS * 4

arch/arm/mach-shmobile/platsmp-apmu.c

@@ -123,7 +123,6 @@ void __init shmobile_smp_apmu_prepare_cpus(unsigned int max_cpus,
 {
 	/* install boot code shared by all CPUs */
 	shmobile_boot_fn = virt_to_phys(shmobile_smp_boot);
-	shmobile_boot_arg = MPIDR_HWID_BITMASK;
 
 	/* perform per-cpu setup */
 	apmu_parse_cfg(apmu_init_cpu, apmu_config, num);

arch/arm/mach-shmobile/platsmp-scu.c

@@ -17,6 +17,9 @@
 #include <asm/smp_scu.h>
 #include "common.h"
 
+
+void __iomem *shmobile_scu_base;
+
 static int shmobile_smp_scu_notifier_call(struct notifier_block *nfb,
 					  unsigned long action, void *hcpu)
 {
@@ -41,7 +44,6 @@ void __init shmobile_smp_scu_prepare_cpus(unsigned int max_cpus)
 {
 	/* install boot code shared by all CPUs */
 	shmobile_boot_fn = virt_to_phys(shmobile_smp_boot);
-	shmobile_boot_arg = MPIDR_HWID_BITMASK;
 
 	/* enable SCU and cache coherency on booting CPU */
 	scu_enable(shmobile_scu_base);

arch/arm/mach-shmobile/smp-r8a7779.c

@@ -92,8 +92,6 @@ static void __init r8a7779_smp_prepare_cpus(unsigned int max_cpus)
 {
 	/* Map the reset vector (in headsmp-scu.S, headsmp.S) */
 	__raw_writel(__pa(shmobile_boot_vector), AVECR);
-	shmobile_boot_fn = virt_to_phys(shmobile_boot_scu);
-	shmobile_boot_arg = (unsigned long)shmobile_scu_base;
 
 	/* setup r8a7779 specific SCU bits */
 	shmobile_scu_base = IOMEM(R8A7779_SCU_BASE);

arch/arm/mm/mmap.c

@@ -173,7 +173,7 @@ unsigned long arch_mmap_rnd(void)
 {
 	unsigned long rnd;
 
-	rnd = (unsigned long)get_random_int() & ((1 << mmap_rnd_bits) - 1);
+	rnd = get_random_long() & ((1UL << mmap_rnd_bits) - 1);
 
 	return rnd << PAGE_SHIFT;
 }

arch/arm/mm/pageattr.c

@@ -49,6 +49,9 @@ static int change_memory_common(unsigned long addr, int numpages,
 		WARN_ON_ONCE(1);
 	}
 
+	if (!numpages)
+		return 0;
+
 	if (start < MODULES_VADDR || start >= MODULES_END)
 		return -EINVAL;
 

arch/arm64/include/asm/pgtable.h

@@ -34,13 +34,13 @@
 /*
  * VMALLOC and SPARSEMEM_VMEMMAP ranges.
  *
- * VMEMAP_SIZE: allows the whole VA space to be covered by a struct page array
+ * VMEMAP_SIZE: allows the whole linear region to be covered by a struct page array
  *	(rounded up to PUD_SIZE).
  * VMALLOC_START: beginning of the kernel VA space
  * VMALLOC_END: extends to the available space below vmmemmap, PCI I/O space,
  *	fixed mappings and modules
  */
-#define VMEMMAP_SIZE		ALIGN((1UL << (VA_BITS - PAGE_SHIFT)) * sizeof(struct page), PUD_SIZE)
+#define VMEMMAP_SIZE		ALIGN((1UL << (VA_BITS - PAGE_SHIFT - 1)) * sizeof(struct page), PUD_SIZE)
 
 #ifndef CONFIG_KASAN
 #define VMALLOC_START		(VA_START)
@@ -51,7 +51,8 @@
 
 #define VMALLOC_END		(PAGE_OFFSET - PUD_SIZE - VMEMMAP_SIZE - SZ_64K)
 
-#define vmemmap			((struct page *)(VMALLOC_END + SZ_64K))
+#define VMEMMAP_START		(VMALLOC_END + SZ_64K)
+#define vmemmap			((struct page *)VMEMMAP_START - (memstart_addr >> PAGE_SHIFT))
 
 #define FIRST_USER_ADDRESS	0UL
 

arch/arm64/kvm/guest.c

@@ -194,7 +194,7 @@ static int get_timer_reg(struct kvm_vcpu *vcpu, const struct kvm_one_reg *reg)
 	u64 val;
 
 	val = kvm_arm_timer_get_reg(vcpu, reg->id);
-	return copy_to_user(uaddr, &val, KVM_REG_SIZE(reg->id));
+	return copy_to_user(uaddr, &val, KVM_REG_SIZE(reg->id)) ? -EFAULT : 0;
 }
 
 /**

arch/arm64/kvm/hyp/vgic-v3-sr.c

@@ -147,16 +147,6 @@ void __hyp_text __vgic_v3_restore_state(struct kvm_vcpu *vcpu)
 	max_lr_idx = vtr_to_max_lr_idx(val);
 	nr_pri_bits = vtr_to_nr_pri_bits(val);
 
-	switch (nr_pri_bits) {
-	case 7:
-		 write_gicreg(cpu_if->vgic_ap1r[3], ICH_AP1R3_EL2);
-		 write_gicreg(cpu_if->vgic_ap1r[2], ICH_AP1R2_EL2);
-	case 6:
-		 write_gicreg(cpu_if->vgic_ap1r[1], ICH_AP1R1_EL2);
-	default:
-		 write_gicreg(cpu_if->vgic_ap1r[0], ICH_AP1R0_EL2);
-	}	 	                           
-		 	                           
 	switch (nr_pri_bits) {
 	case 7:
 		 write_gicreg(cpu_if->vgic_ap0r[3], ICH_AP0R3_EL2);
@@ -167,6 +157,16 @@ void __hyp_text __vgic_v3_restore_state(struct kvm_vcpu *vcpu)
 		 write_gicreg(cpu_if->vgic_ap0r[0], ICH_AP0R0_EL2);
 	}
 
+	switch (nr_pri_bits) {
+	case 7:
+		 write_gicreg(cpu_if->vgic_ap1r[3], ICH_AP1R3_EL2);
+		 write_gicreg(cpu_if->vgic_ap1r[2], ICH_AP1R2_EL2);
+	case 6:
+		 write_gicreg(cpu_if->vgic_ap1r[1], ICH_AP1R1_EL2);
+	default:
+		 write_gicreg(cpu_if->vgic_ap1r[0], ICH_AP1R0_EL2);
+	}
+
 	switch (max_lr_idx) {
 	case 15:
 		write_gicreg(cpu_if->vgic_lr[VGIC_V3_LR_INDEX(15)], ICH_LR15_EL2);

arch/arm64/mm/init.c

@@ -319,8 +319,8 @@ void __init mem_init(void)
 #endif
 		  MLG(VMALLOC_START, VMALLOC_END),
 #ifdef CONFIG_SPARSEMEM_VMEMMAP
-		  MLG((unsigned long)vmemmap,
-		      (unsigned long)vmemmap + VMEMMAP_SIZE),
+		  MLG(VMEMMAP_START,
+		      VMEMMAP_START + VMEMMAP_SIZE),
 		  MLM((unsigned long)virt_to_page(PAGE_OFFSET),
 		      (unsigned long)virt_to_page(high_memory)),
 #endif

arch/arm64/mm/mmap.c

@@ -53,10 +53,10 @@ unsigned long arch_mmap_rnd(void)
 
 #ifdef CONFIG_COMPAT
 	if (test_thread_flag(TIF_32BIT))
-		rnd = (unsigned long)get_random_int() & ((1 << mmap_rnd_compat_bits) - 1);
+		rnd = get_random_long() & ((1UL << mmap_rnd_compat_bits) - 1);
 	else
 #endif
-		rnd = (unsigned long)get_random_int() & ((1 << mmap_rnd_bits) - 1);
+		rnd = get_random_long() & ((1UL << mmap_rnd_bits) - 1);
 	return rnd << PAGE_SHIFT;
 }
 

arch/mips/jz4740/gpio.c

@@ -270,7 +270,7 @@ uint32_t jz_gpio_port_get_value(int port, uint32_t mask)
 }
 EXPORT_SYMBOL(jz_gpio_port_get_value);
 
-#define IRQ_TO_BIT(irq) BIT(irq_to_gpio(irq) & 0x1f)
+#define IRQ_TO_BIT(irq) BIT((irq - JZ4740_IRQ_GPIO(0)) & 0x1f)
 
 static void jz_gpio_check_trigger_both(struct jz_gpio_chip *chip, unsigned int irq)
 {

arch/mips/kernel/r2300_fpu.S

@@ -125,7 +125,7 @@ LEAF(_restore_fp_context)
 	END(_restore_fp_context)
 	.set	reorder
 
-	.type	fault@function
+	.type	fault, @function
 	.ent	fault
 fault:	li	v0, -EFAULT
 	jr	ra

arch/mips/kernel/r4k_fpu.S

@@ -358,7 +358,7 @@ LEAF(_restore_msa_all_upper)
 
 	.set	reorder
 
-	.type	fault@function
+	.type	fault, @function
 	.ent	fault
 fault:	li	v0, -EFAULT				# failure
 	jr	ra

arch/mips/kernel/traps.c

@@ -690,15 +690,15 @@ static int simulate_sync(struct pt_regs *regs, unsigned int opcode)
 asmlinkage void do_ov(struct pt_regs *regs)
 {
 	enum ctx_state prev_state;
-	siginfo_t info;
+	siginfo_t info = {
+		.si_signo = SIGFPE,
+		.si_code = FPE_INTOVF,
+		.si_addr = (void __user *)regs->cp0_epc,
+	};
 
 	prev_state = exception_enter();
 	die_if_kernel("Integer overflow", regs);
 
-	info.si_code = FPE_INTOVF;
-	info.si_signo = SIGFPE;
-	info.si_errno = 0;
-	info.si_addr = (void __user *) regs->cp0_epc;
 	force_sig_info(SIGFPE, &info, current);
 	exception_exit(prev_state);
 }
@@ -874,7 +874,7 @@ out:
 void do_trap_or_bp(struct pt_regs *regs, unsigned int code,
 	const char *str)
 {
-	siginfo_t info;
+	siginfo_t info = { 0 };
 	char b[40];
 
 #ifdef CONFIG_KGDB_LOW_LEVEL_TRAP
@@ -903,7 +903,6 @@ void do_trap_or_bp(struct pt_regs *regs, unsigned int code,
 		else
 			info.si_code = FPE_INTOVF;
 		info.si_signo = SIGFPE;
-		info.si_errno = 0;
 		info.si_addr = (void __user *) regs->cp0_epc;
 		force_sig_info(SIGFPE, &info, current);
 		break;

arch/mips/kvm/mips.c

@@ -702,7 +702,7 @@ static int kvm_mips_get_reg(struct kvm_vcpu *vcpu,
 	} else if ((reg->id & KVM_REG_SIZE_MASK) == KVM_REG_SIZE_U128) {
 		void __user *uaddr = (void __user *)(long)reg->addr;
 
-		return copy_to_user(uaddr, vs, 16);
+		return copy_to_user(uaddr, vs, 16) ? -EFAULT : 0;
 	} else {
 		return -EINVAL;
 	}
@@ -732,7 +732,7 @@ static int kvm_mips_set_reg(struct kvm_vcpu *vcpu,
 	} else if ((reg->id & KVM_REG_SIZE_MASK) == KVM_REG_SIZE_U128) {
 		void __user *uaddr = (void __user *)(long)reg->addr;
 
-		return copy_from_user(vs, uaddr, 16);
+		return copy_from_user(vs, uaddr, 16) ? -EFAULT : 0;
 	} else {
 		return -EINVAL;
 	}

arch/mips/mm/mmap.c

@@ -146,7 +146,7 @@ unsigned long arch_mmap_rnd(void)
 {
 	unsigned long rnd;
 
-	rnd = (unsigned long)get_random_int();
+	rnd = get_random_long();
 	rnd <<= PAGE_SHIFT;
 	if (TASK_IS_32BIT_ADDR)
 		rnd &= 0xfffffful;
@@ -174,7 +174,7 @@ void arch_pick_mmap_layout(struct mm_struct *mm)
 
 static inline unsigned long brk_rnd(void)
 {
-	unsigned long rnd = get_random_int();
+	unsigned long rnd = get_random_long();
 
 	rnd = rnd << PAGE_SHIFT;
 	/* 8MB for 32bit, 256MB for 64bit */

arch/mips/mm/sc-mips.c

@@ -164,11 +164,13 @@ static int __init mips_sc_probe_cm3(void)
 
 	sets = cfg & CM_GCR_L2_CONFIG_SET_SIZE_MSK;
 	sets >>= CM_GCR_L2_CONFIG_SET_SIZE_SHF;
-	c->scache.sets = 64 << sets;
+	if (sets)
+		c->scache.sets = 64 << sets;
 
 	line_sz = cfg & CM_GCR_L2_CONFIG_LINE_SIZE_MSK;
 	line_sz >>= CM_GCR_L2_CONFIG_LINE_SIZE_SHF;
-	c->scache.linesz = 2 << line_sz;
+	if (line_sz)
+		c->scache.linesz = 2 << line_sz;
 
 	assoc = cfg & CM_GCR_L2_CONFIG_ASSOC_MSK;
 	assoc >>= CM_GCR_L2_CONFIG_ASSOC_SHF;
@@ -176,9 +178,12 @@ static int __init mips_sc_probe_cm3(void)
 	c->scache.waysize = c->scache.sets * c->scache.linesz;
 	c->scache.waybit = __ffs(c->scache.waysize);
 
-	c->scache.flags &= ~MIPS_CACHE_NOT_PRESENT;
+	if (c->scache.linesz) {
+		c->scache.flags &= ~MIPS_CACHE_NOT_PRESENT;
+		return 1;
+	}
 
-	return 1;
+	return 0;
 }
 
 static inline int __init mips_sc_probe(void)

arch/parisc/include/asm/floppy.h

@@ -33,7 +33,7 @@
  * floppy accesses go through the track buffer.
  */
 #define _CROSS_64KB(a,s,vdma) \
-(!vdma && ((unsigned long)(a)/K_64 != ((unsigned long)(a) + (s) - 1) / K_64))
+(!(vdma) && ((unsigned long)(a)/K_64 != ((unsigned long)(a) + (s) - 1) / K_64))
 
 #define CROSS_64KB(a,s) _CROSS_64KB(a,s,use_virtual_dma & 1)
 

arch/parisc/include/uapi/asm/unistd.h

@@ -361,8 +361,9 @@
 #define __NR_membarrier		(__NR_Linux + 343)
 #define __NR_userfaultfd	(__NR_Linux + 344)
 #define __NR_mlock2		(__NR_Linux + 345)
+#define __NR_copy_file_range	(__NR_Linux + 346)
 
-#define __NR_Linux_syscalls	(__NR_mlock2 + 1)
+#define __NR_Linux_syscalls	(__NR_copy_file_range + 1)
 
 
 #define __IGNORE_select		/* newselect */

arch/parisc/kernel/ptrace.c

@@ -269,14 +269,19 @@ long compat_arch_ptrace(struct task_struct *child, compat_long_t request,
 
 long do_syscall_trace_enter(struct pt_regs *regs)
 {
-	long ret = 0;
-
 	/* Do the secure computing check first. */
 	secure_computing_strict(regs->gr[20]);
 
 	if (test_thread_flag(TIF_SYSCALL_TRACE) &&
-	    tracehook_report_syscall_entry(regs))
-		ret = -1L;
+	    tracehook_report_syscall_entry(regs)) {
+		/*
+		 * Tracing decided this syscall should not happen or the
+		 * debugger stored an invalid system call number. Skip
+		 * the system call and the system call restart handling.
+		 */
+		regs->gr[20] = -1UL;
+		goto out;
+	}
 
 #ifdef CONFIG_64BIT
 	if (!is_compat_task())
@@ -290,7 +295,8 @@ long do_syscall_trace_enter(struct pt_regs *regs)
 			regs->gr[24] & 0xffffffff,
 			regs->gr[23] & 0xffffffff);
 
-	return ret ? : regs->gr[20];
+out:
+	return regs->gr[20];
 }
 
 void do_syscall_trace_exit(struct pt_regs *regs)

arch/parisc/kernel/syscall.S

@@ -343,7 +343,7 @@ tracesys_next:
 #endif
 
 	comiclr,>>=	__NR_Linux_syscalls, %r20, %r0
-	b,n	.Lsyscall_nosys
+	b,n	.Ltracesys_nosys
 
 	LDREGX  %r20(%r19), %r19
 
@@ -359,6 +359,9 @@ tracesys_next:
 	be      0(%sr7,%r19)
 	ldo	R%tracesys_exit(%r2),%r2
 
+.Ltracesys_nosys:
+	ldo	-ENOSYS(%r0),%r28		/* set errno */
+
 	/* Do *not* call this function on the gateway page, because it
 	makes a direct call to syscall_trace. */
 	

arch/parisc/kernel/syscall_table.S

@@ -441,6 +441,7 @@
 	ENTRY_SAME(membarrier)
 	ENTRY_SAME(userfaultfd)
 	ENTRY_SAME(mlock2)		/* 345 */
+	ENTRY_SAME(copy_file_range)
 
 
 .ifne (. - 90b) - (__NR_Linux_syscalls * (91b - 90b))

arch/powerpc/kernel/eeh_driver.c

@@ -418,8 +418,7 @@ static void *eeh_rmv_device(void *data, void *userdata)
 		eeh_pcid_put(dev);
 		if (driver->err_handler &&
 		    driver->err_handler->error_detected &&
-		    driver->err_handler->slot_reset &&
-		    driver->err_handler->resume)
+		    driver->err_handler->slot_reset)
 			return NULL;
 	}
 

arch/powerpc/kernel/hw_breakpoint.c

@@ -109,8 +109,9 @@ void arch_unregister_hw_breakpoint(struct perf_event *bp)
 	 * If the breakpoint is unregistered between a hw_breakpoint_handler()
 	 * and the single_step_dabr_instruction(), then cleanup the breakpoint
 	 * restoration variables to prevent dangling pointers.
+	 * FIXME, this should not be using bp->ctx at all! Sayeth peterz.
 	 */
-	if (bp->ctx && bp->ctx->task)
+	if (bp->ctx && bp->ctx->task && bp->ctx->task != ((void *)-1L))
 		bp->ctx->task->thread.last_hit_ubp = NULL;
 }
 

arch/powerpc/kernel/process.c

@@ -1768,9 +1768,9 @@ static inline unsigned long brk_rnd(void)
 
 	/* 8MB for 32bit, 1GB for 64bit */
 	if (is_32bit_task())
-		rnd = (long)(get_random_int() % (1<<(23-PAGE_SHIFT)));
+		rnd = (get_random_long() % (1UL<<(23-PAGE_SHIFT)));
 	else
-		rnd = (long)(get_random_int() % (1<<(30-PAGE_SHIFT)));
+		rnd = (get_random_long() % (1UL<<(30-PAGE_SHIFT)));
 
 	return rnd << PAGE_SHIFT;
 }

arch/powerpc/mm/hash64_64k.c

@@ -111,7 +111,13 @@ int __hash_page_4K(unsigned long ea, unsigned long access, unsigned long vsid,
 	 */
 	if (!(old_pte & _PAGE_COMBO)) {
 		flush_hash_page(vpn, rpte, MMU_PAGE_64K, ssize, flags);
-		old_pte &= ~_PAGE_HASHPTE | _PAGE_F_GIX | _PAGE_F_SECOND;
+		/*
+		 * clear the old slot details from the old and new pte.
+		 * On hash insert failure we use old pte value and we don't
+		 * want slot information there if we have a insert failure.
+		 */
+		old_pte &= ~(_PAGE_HASHPTE | _PAGE_F_GIX | _PAGE_F_SECOND);
+		new_pte &= ~(_PAGE_HASHPTE | _PAGE_F_GIX | _PAGE_F_SECOND);
 		goto htab_insert_hpte;
 	}
 	/*

arch/powerpc/mm/hugepage-hash64.c

@@ -78,9 +78,19 @@ int __hash_page_thp(unsigned long ea, unsigned long access, unsigned long vsid,
 		 * base page size. This is because demote_segment won't flush
 		 * hash page table entries.
 		 */
-		if ((old_pmd & _PAGE_HASHPTE) && !(old_pmd & _PAGE_COMBO))
+		if ((old_pmd & _PAGE_HASHPTE) && !(old_pmd & _PAGE_COMBO)) {
 			flush_hash_hugepage(vsid, ea, pmdp, MMU_PAGE_64K,
 					    ssize, flags);
+			/*
+			 * With THP, we also clear the slot information with
+			 * respect to all the 64K hash pte mapping the 16MB
+			 * page. They are all invalid now. This make sure we
+			 * don't find the slot valid when we fault with 4k
+			 * base page size.
+			 *
+			 */
+			memset(hpte_slot_array, 0, PTE_FRAG_SIZE);
+		}
 	}
 
 	valid = hpte_valid(hpte_slot_array, index);

arch/powerpc/mm/hugetlbpage-book3e.c

@@ -8,6 +8,8 @@
 #include <linux/mm.h>
 #include <linux/hugetlb.h>
 
+#include <asm/mmu.h>
+
 #ifdef CONFIG_PPC_FSL_BOOK3E
 #ifdef CONFIG_PPC64
 static inline int tlb1_next(void)
@@ -60,6 +62,14 @@ static inline void book3e_tlb_lock(void)
 	unsigned long tmp;
 	int token = smp_processor_id() + 1;
 
+	/*
+	 * Besides being unnecessary in the absence of SMT, this
+	 * check prevents trying to do lbarx/stbcx. on e5500 which
+	 * doesn't implement either feature.
+	 */
+	if (!cpu_has_feature(CPU_FTR_SMT))
+		return;
+
 	asm volatile("1: lbarx %0, 0, %1;"
 		     "cmpwi %0, 0;"
 		     "bne 2f;"
@@ -80,6 +90,9 @@ static inline void book3e_tlb_unlock(void)
 {
 	struct paca_struct *paca = get_paca();
 
+	if (!cpu_has_feature(CPU_FTR_SMT))
+		return;
+
 	isync();
 	paca->tcd_ptr->lock = 0;
 }

arch/powerpc/mm/mmap.c

@@ -59,9 +59,9 @@ unsigned long arch_mmap_rnd(void)
 
 	/* 8MB for 32bit, 1GB for 64bit */
 	if (is_32bit_task())
-		rnd = (unsigned long)get_random_int() % (1<<(23-PAGE_SHIFT));
+		rnd = get_random_long() % (1<<(23-PAGE_SHIFT));
 	else
-		rnd = (unsigned long)get_random_int() % (1<<(30-PAGE_SHIFT));
+		rnd = get_random_long() % (1UL<<(30-PAGE_SHIFT));
 
 	return rnd << PAGE_SHIFT;
 }

arch/s390/include/asm/fpu/internal.h

@@ -40,6 +40,7 @@ static inline void convert_fp_to_vx(__vector128 *vxrs, freg_t *fprs)
 static inline void fpregs_store(_s390_fp_regs *fpregs, struct fpu *fpu)
 {
 	fpregs->pad = 0;
+	fpregs->fpc = fpu->fpc;
 	if (MACHINE_HAS_VX)
 		convert_vx_to_fp((freg_t *)&fpregs->fprs, fpu->vxrs);
 	else
@@ -49,6 +50,7 @@ static inline void fpregs_store(_s390_fp_regs *fpregs, struct fpu *fpu)
 
 static inline void fpregs_load(_s390_fp_regs *fpregs, struct fpu *fpu)
 {
+	fpu->fpc = fpregs->fpc;
 	if (MACHINE_HAS_VX)
 		convert_fp_to_vx(fpu->vxrs, (freg_t *)&fpregs->fprs);
 	else

arch/s390/kernel/compat_signal.c

@@ -271,7 +271,7 @@ static int restore_sigregs_ext32(struct pt_regs *regs,
 
 	/* Restore high gprs from signal stack */
 	if (__copy_from_user(&gprs_high, &sregs_ext->gprs_high,
-			     sizeof(&sregs_ext->gprs_high)))
+			     sizeof(sregs_ext->gprs_high)))
 		return -EFAULT;
 	for (i = 0; i < NUM_GPRS; i++)
 		*(__u32 *)&regs->gprs[i] = gprs_high[i];

arch/sparc/Makefile

@@ -24,7 +24,13 @@ LDFLAGS        := -m elf32_sparc
 export BITS    := 32
 UTS_MACHINE    := sparc
 
+# We are adding -Wa,-Av8 to KBUILD_CFLAGS to deal with a specs bug in some
+# versions of gcc.  Some gcc versions won't pass -Av8 to binutils when you
+# give -mcpu=v8.  This silently worked with older bintutils versions but
+# does not any more.
 KBUILD_CFLAGS  += -m32 -mcpu=v8 -pipe -mno-fpu -fcall-used-g5 -fcall-used-g7
+KBUILD_CFLAGS  += -Wa,-Av8
+
 KBUILD_AFLAGS  += -m32 -Wa,-Av8
 
 else

arch/sparc/include/uapi/asm/unistd.h

@@ -422,8 +422,9 @@
 #define __NR_listen		354
 #define __NR_setsockopt		355
 #define __NR_mlock2		356
+#define __NR_copy_file_range	357
 
-#define NR_syscalls		357
+#define NR_syscalls		358
 
 /* Bitmask values returned from kern_features system call.  */
 #define KERN_FEATURE_MIXED_MODE_STACK	0x00000001

arch/sparc/kernel/entry.S

@@ -948,7 +948,24 @@ linux_syscall_trace:
 	cmp	%o0, 0
 	bne	3f
 	 mov	-ENOSYS, %o0
+
+	/* Syscall tracing can modify the registers.  */
+	ld	[%sp + STACKFRAME_SZ + PT_G1], %g1
+	sethi	%hi(sys_call_table), %l7
+	ld	[%sp + STACKFRAME_SZ + PT_I0], %i0
+	or	%l7, %lo(sys_call_table), %l7
+	ld	[%sp + STACKFRAME_SZ + PT_I1], %i1
+	ld	[%sp + STACKFRAME_SZ + PT_I2], %i2
+	ld	[%sp + STACKFRAME_SZ + PT_I3], %i3
+	ld	[%sp + STACKFRAME_SZ + PT_I4], %i4
+	ld	[%sp + STACKFRAME_SZ + PT_I5], %i5
+	cmp	%g1, NR_syscalls
+	bgeu	3f
+	 mov	-ENOSYS, %o0
+
+	sll	%g1, 2, %l4
 	mov	%i0, %o0
+	ld	[%l7 + %l4], %l7
 	mov	%i1, %o1
 	mov	%i2, %o2
 	mov	%i3, %o3

arch/sparc/kernel/hvcalls.S

@@ -338,8 +338,9 @@ ENTRY(sun4v_mach_set_watchdog)
 	mov	%o1, %o4
 	mov	HV_FAST_MACH_SET_WATCHDOG, %o5
 	ta	HV_FAST_TRAP
+	brnz,a,pn %o4, 0f
 	stx	%o1, [%o4]
-	retl
+0:	retl
 	 nop
 ENDPROC(sun4v_mach_set_watchdog)
 

arch/sparc/kernel/signal_64.c

@@ -52,7 +52,7 @@ asmlinkage void sparc64_set_context(struct pt_regs *regs)
 	unsigned char fenab;
 	int err;
 
-	flush_user_windows();
+	synchronize_user_stack();
 	if (get_thread_wsaved()					||
 	    (((unsigned long)ucp) & (sizeof(unsigned long)-1))	||
 	    (!__access_ok(ucp, sizeof(*ucp))))

arch/sparc/kernel/sparc_ksyms_64.c

@@ -37,6 +37,7 @@ EXPORT_SYMBOL(sun4v_niagara_getperf);
 EXPORT_SYMBOL(sun4v_niagara_setperf);
 EXPORT_SYMBOL(sun4v_niagara2_getperf);
 EXPORT_SYMBOL(sun4v_niagara2_setperf);
+EXPORT_SYMBOL(sun4v_mach_set_watchdog);
 
 /* from hweight.S */
 EXPORT_SYMBOL(__arch_hweight8);

arch/sparc/kernel/sys_sparc_64.c

@@ -264,7 +264,7 @@ static unsigned long mmap_rnd(void)
 	unsigned long rnd = 0UL;
 
 	if (current->flags & PF_RANDOMIZE) {
-		unsigned long val = get_random_int();
+		unsigned long val = get_random_long();
 		if (test_thread_flag(TIF_32BIT))
 			rnd = (val % (1UL << (23UL-PAGE_SHIFT)));
 		else

arch/sparc/kernel/syscalls.S

@@ -158,7 +158,25 @@ linux_syscall_trace32:
 	 add	%sp, PTREGS_OFF, %o0
 	brnz,pn	%o0, 3f
 	 mov	-ENOSYS, %o0
+
+	/* Syscall tracing can modify the registers.  */
+	ldx	[%sp + PTREGS_OFF + PT_V9_G1], %g1
+	sethi	%hi(sys_call_table32), %l7
+	ldx	[%sp + PTREGS_OFF + PT_V9_I0], %i0
+	or	%l7, %lo(sys_call_table32), %l7
+	ldx	[%sp + PTREGS_OFF + PT_V9_I1], %i1
+	ldx	[%sp + PTREGS_OFF + PT_V9_I2], %i2
+	ldx	[%sp + PTREGS_OFF + PT_V9_I3], %i3
+	ldx	[%sp + PTREGS_OFF + PT_V9_I4], %i4
+	ldx	[%sp + PTREGS_OFF + PT_V9_I5], %i5
+
+	cmp	%g1, NR_syscalls
+	bgeu,pn	%xcc, 3f
+	 mov	-ENOSYS, %o0
+
+	sll	%g1, 2, %l4
 	srl	%i0, 0, %o0
+	lduw	[%l7 + %l4], %l7
 	srl	%i4, 0, %o4
 	srl	%i1, 0, %o1
 	srl	%i2, 0, %o2
@@ -170,7 +188,25 @@ linux_syscall_trace:
 	 add	%sp, PTREGS_OFF, %o0
 	brnz,pn	%o0, 3f
 	 mov	-ENOSYS, %o0
+
+	/* Syscall tracing can modify the registers.  */
+	ldx	[%sp + PTREGS_OFF + PT_V9_G1], %g1
+	sethi	%hi(sys_call_table64), %l7
+	ldx	[%sp + PTREGS_OFF + PT_V9_I0], %i0
+	or	%l7, %lo(sys_call_table64), %l7
+	ldx	[%sp + PTREGS_OFF + PT_V9_I1], %i1
+	ldx	[%sp + PTREGS_OFF + PT_V9_I2], %i2
+	ldx	[%sp + PTREGS_OFF + PT_V9_I3], %i3
+	ldx	[%sp + PTREGS_OFF + PT_V9_I4], %i4
+	ldx	[%sp + PTREGS_OFF + PT_V9_I5], %i5
+
+	cmp	%g1, NR_syscalls
+	bgeu,pn	%xcc, 3f
+	 mov	-ENOSYS, %o0
+
+	sll	%g1, 2, %l4
 	mov	%i0, %o0
+	lduw	[%l7 + %l4], %l7
 	mov	%i1, %o1
 	mov	%i2, %o2
 	mov	%i3, %o3

arch/sparc/kernel/systbls_32.S

@@ -88,4 +88,4 @@ sys_call_table:
 /*340*/	.long sys_ni_syscall, sys_kcmp, sys_finit_module, sys_sched_setattr, sys_sched_getattr
 /*345*/	.long sys_renameat2, sys_seccomp, sys_getrandom, sys_memfd_create, sys_bpf
 /*350*/	.long sys_execveat, sys_membarrier, sys_userfaultfd, sys_bind, sys_listen
-/*355*/	.long sys_setsockopt, sys_mlock2
+/*355*/	.long sys_setsockopt, sys_mlock2, sys_copy_file_range

arch/sparc/kernel/systbls_64.S

@@ -89,7 +89,7 @@ sys_call_table32:
 /*340*/	.word sys_kern_features, sys_kcmp, sys_finit_module, sys_sched_setattr, sys_sched_getattr
 	.word sys32_renameat2, sys_seccomp, sys_getrandom, sys_memfd_create, sys_bpf
 /*350*/	.word sys32_execveat, sys_membarrier, sys_userfaultfd, sys_bind, sys_listen
-	.word compat_sys_setsockopt, sys_mlock2
+	.word compat_sys_setsockopt, sys_mlock2, sys_copy_file_range
 
 #endif /* CONFIG_COMPAT */
 
@@ -170,4 +170,4 @@ sys_call_table:
 /*340*/	.word sys_kern_features, sys_kcmp, sys_finit_module, sys_sched_setattr, sys_sched_getattr
 	.word sys_renameat2, sys_seccomp, sys_getrandom, sys_memfd_create, sys_bpf
 /*350*/	.word sys64_execveat, sys_membarrier, sys_userfaultfd, sys_bind, sys_listen
-	.word sys_setsockopt, sys_mlock2
+	.word sys_setsockopt, sys_mlock2, sys_copy_file_range

arch/um/kernel/reboot.c

@@ -12,6 +12,7 @@
 #include <skas.h>
 
 void (*pm_power_off)(void);
+EXPORT_SYMBOL(pm_power_off);
 
 static void kill_off_processes(void)
 {

arch/um/kernel/signal.c

@@ -69,7 +69,7 @@ void do_signal(struct pt_regs *regs)
 	struct ksignal ksig;
 	int handled_sig = 0;
 
-	if (get_signal(&ksig)) {
+	while (get_signal(&ksig)) {
 		handled_sig = 1;
 		/* Whee!  Actually deliver the signal.  */
 		handle_signal(&ksig, regs);

arch/x86/entry/entry_32.S

@@ -294,6 +294,7 @@ sysenter_past_esp:
 	pushl	$__USER_DS		/* pt_regs->ss */
 	pushl	%ebp			/* pt_regs->sp (stashed in bp) */
 	pushfl				/* pt_regs->flags (except IF = 0) */
+	ASM_CLAC			/* Clear AC after saving FLAGS */
 	orl	$X86_EFLAGS_IF, (%esp)	/* Fix IF */
 	pushl	$__USER_CS		/* pt_regs->cs */
 	pushl	$0			/* pt_regs->ip = 0 (placeholder) */

arch/x86/entry/entry_64_compat.S

@@ -261,6 +261,7 @@ ENTRY(entry_INT80_compat)
 	 * Interrupts are off on entry.
 	 */
 	PARAVIRT_ADJUST_EXCEPTION_FRAME
+	ASM_CLAC			/* Do this early to minimize exposure */
 	SWAPGS
 
 	/*

arch/x86/include/asm/pci_x86.h

@@ -93,6 +93,8 @@ extern raw_spinlock_t pci_config_lock;
 extern int (*pcibios_enable_irq)(struct pci_dev *dev);
 extern void (*pcibios_disable_irq)(struct pci_dev *dev);
 
+extern bool mp_should_keep_irq(struct device *dev);
+
 struct pci_raw_ops {
 	int (*read)(unsigned int domain, unsigned int bus, unsigned int devfn,
 						int reg, int len, u32 *val);

arch/x86/include/asm/uaccess_32.h

@@ -48,20 +48,28 @@ __copy_to_user_inatomic(void __user *to, const void *from, unsigned long n)
 
 		switch (n) {
 		case 1:
+			__uaccess_begin();
 			__put_user_size(*(u8 *)from, (u8 __user *)to,
 					1, ret, 1);
+			__uaccess_end();
 			return ret;
 		case 2:
+			__uaccess_begin();
 			__put_user_size(*(u16 *)from, (u16 __user *)to,
 					2, ret, 2);
+			__uaccess_end();
 			return ret;
 		case 4:
+			__uaccess_begin();
 			__put_user_size(*(u32 *)from, (u32 __user *)to,
 					4, ret, 4);
+			__uaccess_end();
 			return ret;
 		case 8:
+			__uaccess_begin();
 			__put_user_size(*(u64 *)from, (u64 __user *)to,
 					8, ret, 8);
+			__uaccess_end();
 			return ret;
 		}
 	}
@@ -103,13 +111,19 @@ __copy_from_user_inatomic(void *to, const void __user *from, unsigned long n)
 
 		switch (n) {
 		case 1:
+			__uaccess_begin();
 			__get_user_size(*(u8 *)to, from, 1, ret, 1);
+			__uaccess_end();
 			return ret;
 		case 2:
+			__uaccess_begin();
 			__get_user_size(*(u16 *)to, from, 2, ret, 2);
+			__uaccess_end();
 			return ret;
 		case 4:
+			__uaccess_begin();
 			__get_user_size(*(u32 *)to, from, 4, ret, 4);
+			__uaccess_end();
 			return ret;
 		}
 	}
@@ -148,13 +162,19 @@ __copy_from_user(void *to, const void __user *from, unsigned long n)
 
 		switch (n) {
 		case 1:
+			__uaccess_begin();
 			__get_user_size(*(u8 *)to, from, 1, ret, 1);
+			__uaccess_end();
 			return ret;
 		case 2:
+			__uaccess_begin();
 			__get_user_size(*(u16 *)to, from, 2, ret, 2);
+			__uaccess_end();
 			return ret;
 		case 4:
+			__uaccess_begin();
 			__get_user_size(*(u32 *)to, from, 4, ret, 4);
+			__uaccess_end();
 			return ret;
 		}
 	}
@@ -170,13 +190,19 @@ static __always_inline unsigned long __copy_from_user_nocache(void *to,
 
 		switch (n) {
 		case 1:
+			__uaccess_begin();
 			__get_user_size(*(u8 *)to, from, 1, ret, 1);
+			__uaccess_end();
 			return ret;
 		case 2:
+			__uaccess_begin();
 			__get_user_size(*(u16 *)to, from, 2, ret, 2);
+			__uaccess_end();
 			return ret;
 		case 4:
+			__uaccess_begin();
 			__get_user_size(*(u32 *)to, from, 4, ret, 4);
+			__uaccess_end();
 			return ret;
 		}
 	}

arch/x86/include/asm/xen/pci.h

@@ -57,7 +57,7 @@ static inline int xen_pci_frontend_enable_msi(struct pci_dev *dev,
 {
 	if (xen_pci_frontend && xen_pci_frontend->enable_msi)
 		return xen_pci_frontend->enable_msi(dev, vectors);
-	return -ENODEV;
+	return -ENOSYS;
 }
 static inline void xen_pci_frontend_disable_msi(struct pci_dev *dev)
 {
@@ -69,7 +69,7 @@ static inline int xen_pci_frontend_enable_msix(struct pci_dev *dev,
 {
 	if (xen_pci_frontend && xen_pci_frontend->enable_msix)
 		return xen_pci_frontend->enable_msix(dev, vectors, nvec);
-	return -ENODEV;
+	return -ENOSYS;
 }
 static inline void xen_pci_frontend_disable_msix(struct pci_dev *dev)
 {

arch/x86/kernel/acpi/sleep.c

@@ -16,6 +16,7 @@
 #include <asm/cacheflush.h>
 #include <asm/realmode.h>
 
+#include <linux/ftrace.h>
 #include "../../realmode/rm/wakeup.h"
 #include "sleep.h"
 
@@ -107,7 +108,13 @@ int x86_acpi_suspend_lowlevel(void)
        saved_magic = 0x123456789abcdef0L;
 #endif /* CONFIG_64BIT */
 
+	/*
+	 * Pause/unpause graph tracing around do_suspend_lowlevel as it has
+	 * inconsistent call/return info after it jumps to the wakeup vector.
+	 */
+	pause_graph_tracing();
 	do_suspend_lowlevel();
+	unpause_graph_tracing();
 	return 0;
 }