Merge branch 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux

Pull i2c fixes from Wolfram Sang:
 "A few bugfixes and one PCI ID addition from I2C"

* 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
  i2c: i801: add Intel Lewisburg device IDs
  i2c: fix wakeup irq parsing
  i2c: xiic: Prevent concurrent running of the IRQ handler and __xiic_start_xfer()
  i2c: Revert "i2c: xiic: Do not reset controller before every transfer"
  i2c: imx: fix a compiling error

Documentation/i2c/busses/i2c-i801

@@ -32,6 +32,7 @@ Supported adapters:
   * Intel Sunrise Point-LP (PCH)
   * Intel DNV (SOC)
   * Intel Broxton (SOC)
+  * Intel Lewisburg (PCH)
    Datasheets: Publicly available at the Intel website
 
 On Intel Patsburg and later chipsets, both the normal host SMBus controller

drivers/i2c/busses/Kconfig

@@ -126,6 +126,7 @@ config I2C_I801
 	    Sunrise Point-LP (PCH)
 	    DNV (SOC)
 	    Broxton (SOC)
+	    Lewisburg (PCH)
 
 	  This driver can also be built as a module.  If so, the module
 	  will be called i2c-i801.

drivers/i2c/busses/i2c-i801.c

@@ -62,6 +62,8 @@
  * Sunrise Point-LP (PCH)	0x9d23	32	hard	yes	yes	yes
  * DNV (SOC)			0x19df	32	hard	yes	yes	yes
  * Broxton (SOC)		0x5ad4	32	hard	yes	yes	yes
+ * Lewisburg (PCH)		0xa1a3	32	hard	yes	yes	yes
+ * Lewisburg Supersku (PCH)	0xa223	32	hard	yes	yes	yes
  *
  * Features supported by this driver:
  * Software PEC				no
@@ -206,6 +208,8 @@
 #define PCI_DEVICE_ID_INTEL_SUNRISEPOINT_LP_SMBUS	0x9d23
 #define PCI_DEVICE_ID_INTEL_DNV_SMBUS			0x19df
 #define PCI_DEVICE_ID_INTEL_BROXTON_SMBUS		0x5ad4
+#define PCI_DEVICE_ID_INTEL_LEWISBURG_SMBUS		0xa1a3
+#define PCI_DEVICE_ID_INTEL_LEWISBURG_SSKU_SMBUS	0xa223
 
 struct i801_mux_config {
 	char *gpio_chip;
@@ -869,6 +873,8 @@ static const struct pci_device_id i801_ids[] = {
 	{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_SUNRISEPOINT_LP_SMBUS) },
 	{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_DNV_SMBUS) },
 	{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_BROXTON_SMBUS) },
+	{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_LEWISBURG_SMBUS) },
+	{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_LEWISBURG_SSKU_SMBUS) },
 	{ 0, }
 };
 

drivers/i2c/busses/i2c-imx.c

@@ -50,6 +50,7 @@
 #include <linux/of_device.h>
 #include <linux/of_dma.h>
 #include <linux/of_gpio.h>
+#include <linux/pinctrl/consumer.h>
 #include <linux/platform_data/i2c-imx.h>
 #include <linux/platform_device.h>
 #include <linux/sched.h>

drivers/i2c/busses/i2c-xiic.c

@@ -662,8 +662,10 @@ static void __xiic_start_xfer(struct xiic_i2c *i2c)
 
 static void xiic_start_xfer(struct xiic_i2c *i2c)
 {
-
+	spin_lock(&i2c->lock);
+	xiic_reinit(i2c);
 	__xiic_start_xfer(i2c);
+	spin_unlock(&i2c->lock);
 }
 
 static int xiic_xfer(struct i2c_adapter *adap, struct i2c_msg *msgs, int num)

drivers/i2c/i2c-core.c

@@ -715,7 +715,7 @@ static int i2c_device_probe(struct device *dev)
 		if (wakeirq > 0 && wakeirq != client->irq)
 			status = dev_pm_set_dedicated_wake_irq(dev, wakeirq);
 		else if (client->irq > 0)
-			status = dev_pm_set_wake_irq(dev, wakeirq);
+			status = dev_pm_set_wake_irq(dev, client->irq);
 		else
 			status = 0;