Merge tag 'sunxi-clk-for-4.12' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into clk-next

Pull Allwinner clock patches for 4.12 from Maxime Ripard:

Support for the new H5 SoC and the PRCM block found in a number of SoCs as
well, plus the usual chunk of fixes and minor enhancements.

* tag 'sunxi-clk-for-4.12' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux:
  clk: sunxi-ng: Display index when clock registration fails
  clk: sunxi-ng: a33: Add offset and minimum value for DDR1 PLL N factor
  clk: sunxi-ng: a80: Remodel CPU cluster PLLs as N-type multiplier clocks
  clk: sunxi-ng: mult: Support PLL lock detection
  clk: sunxi-ng: add support for PRCM CCUs
  dt-bindings: update device tree binding for Allwinner PRCM CCUs
  clk: sunxi-ng: sun5i: Fix mux width for csi clock
  clk: sunxi-ng: tighten SoC deps on explicit AllWinner SoCs
  clk: sunxi-ng: add Allwinner H5 CCU support for H3 CCU driver
  clk: sunxi-ng: gate: Support common pre-dividers

Documentation/devicetree/bindings/clock/sunxi-ccu.txt

@@ -7,9 +7,12 @@ Required properties :
 		- "allwinner,sun8i-a23-ccu"
 		- "allwinner,sun8i-a33-ccu"
 		- "allwinner,sun8i-h3-ccu"
+		- "allwinner,sun8i-h3-r-ccu"
 		- "allwinner,sun8i-v3s-ccu"
 		- "allwinner,sun9i-a80-ccu"
 		- "allwinner,sun50i-a64-ccu"
+		- "allwinner,sun50i-a64-r-ccu"
+		- "allwinner,sun50i-h5-ccu"
 
 - reg: Must contain the registers base address and length
 - clocks: phandle to the oscillators feeding the CCU. Two are needed:
@@ -19,7 +22,10 @@ Required properties :
 - #clock-cells : must contain 1
 - #reset-cells : must contain 1
 
-Example:
+For the PRCM CCUs on H3/A64, one more clock is needed:
+- "iosc": the SoC's internal frequency oscillator
+
+Example for generic CCU:
 ccu: clock@01c20000 {
 	compatible = "allwinner,sun8i-h3-ccu";
 	reg = <0x01c20000 0x400>;
@@ -28,3 +34,13 @@ ccu: clock@01c20000 {
 	#clock-cells = <1>;
 	#reset-cells = <1>;
 };
+
+Example for PRCM CCU:
+r_ccu: clock@01f01400 {
+	compatible = "allwinner,sun50i-a64-r-ccu";
+	reg = <0x01f01400 0x100>;
+	clocks = <&osc24M>, <&osc32k>, <&iosc>;
+	clock-names = "hosc", "losc", "iosc";
+	#clock-cells = <1>;
+	#reset-cells = <1>;
+};

drivers/clk/sunxi-ng/Kconfig

@@ -64,6 +64,7 @@ config SUN50I_A64_CCU
 	select SUNXI_CCU_MP
 	select SUNXI_CCU_PHASE
 	default ARM64 && ARCH_SUNXI
+	depends on (ARM64 && ARCH_SUNXI) || COMPILE_TEST
 
 config SUN5I_CCU
 	bool "Support for the Allwinner sun5i family CCM"
@@ -75,6 +76,7 @@ config SUN5I_CCU
 	select SUNXI_CCU_MP
 	select SUNXI_CCU_PHASE
 	default MACH_SUN5I
+	depends on MACH_SUN5I || COMPILE_TEST
 
 config SUN6I_A31_CCU
 	bool "Support for the Allwinner A31/A31s CCU"
@@ -86,6 +88,7 @@ config SUN6I_A31_CCU
 	select SUNXI_CCU_MP
 	select SUNXI_CCU_PHASE
 	default MACH_SUN6I
+	depends on MACH_SUN6I || COMPILE_TEST
 
 config SUN8I_A23_CCU
 	bool "Support for the Allwinner A23 CCU"
@@ -98,6 +101,7 @@ config SUN8I_A23_CCU
 	select SUNXI_CCU_MP
 	select SUNXI_CCU_PHASE
 	default MACH_SUN8I
+	depends on MACH_SUN8I || COMPILE_TEST
 
 config SUN8I_A33_CCU
 	bool "Support for the Allwinner A33 CCU"
@@ -110,6 +114,7 @@ config SUN8I_A33_CCU
 	select SUNXI_CCU_MP
 	select SUNXI_CCU_PHASE
 	default MACH_SUN8I
+	depends on MACH_SUN8I || COMPILE_TEST
 
 config SUN8I_H3_CCU
 	bool "Support for the Allwinner H3 CCU"
@@ -120,7 +125,8 @@ config SUN8I_H3_CCU
 	select SUNXI_CCU_NM
 	select SUNXI_CCU_MP
 	select SUNXI_CCU_PHASE
-	default MACH_SUN8I
+	default MACH_SUN8I || (ARM64 && ARCH_SUNXI)
+	depends on MACH_SUN8I || (ARM64 && ARCH_SUNXI) || COMPILE_TEST
 
 config SUN8I_V3S_CCU
 	bool "Support for the Allwinner V3s CCU"
@@ -132,6 +138,7 @@ config SUN8I_V3S_CCU
 	select SUNXI_CCU_MP
 	select SUNXI_CCU_PHASE
 	default MACH_SUN8I
+	depends on MACH_SUN8I || COMPILE_TEST
 
 config SUN9I_A80_CCU
 	bool "Support for the Allwinner A80 CCU"
@@ -143,5 +150,12 @@ config SUN9I_A80_CCU
 	select SUNXI_CCU_MP
 	select SUNXI_CCU_PHASE
 	default MACH_SUN9I
+	depends on MACH_SUN9I || COMPILE_TEST
+
+config SUN8I_R_CCU
+	bool "Support for Allwinner SoCs' PRCM CCUs"
+	select SUNXI_CCU_DIV
+	select SUNXI_CCU_GATE
+	default MACH_SUN8I || (ARCH_SUNXI && ARM64)
 
 endif

drivers/clk/sunxi-ng/Makefile

@@ -25,6 +25,7 @@ obj-$(CONFIG_SUN8I_A23_CCU)	+= ccu-sun8i-a23.o
 obj-$(CONFIG_SUN8I_A33_CCU)	+= ccu-sun8i-a33.o
 obj-$(CONFIG_SUN8I_H3_CCU)	+= ccu-sun8i-h3.o
 obj-$(CONFIG_SUN8I_V3S_CCU)	+= ccu-sun8i-v3s.o
+obj-$(CONFIG_SUN8I_R_CCU)	+= ccu-sun8i-r.o
 obj-$(CONFIG_SUN9I_A80_CCU)	+= ccu-sun9i-a80.o
 obj-$(CONFIG_SUN9I_A80_CCU)	+= ccu-sun9i-a80-de.o
 obj-$(CONFIG_SUN9I_A80_CCU)	+= ccu-sun9i-a80-usb.o

drivers/clk/sunxi-ng/ccu-sun5i.c

@@ -469,7 +469,7 @@ static const char * const csi_parents[] = { "hosc", "pll-video0", "pll-video1",
 static const u8 csi_table[] = { 0, 1, 2, 5, 6 };
 static SUNXI_CCU_M_WITH_MUX_TABLE_GATE(csi_clk, "csi",
 				       csi_parents, csi_table,
-				       0x134, 0, 5, 24, 2, BIT(31), 0);
+				       0x134, 0, 5, 24, 3, BIT(31), 0);
 
 static SUNXI_CCU_GATE(ve_clk,		"ve",		"pll-ve",
 		      0x13c, BIT(31), CLK_SET_RATE_PARENT);

drivers/clk/sunxi-ng/ccu-sun8i-a33.c

@@ -159,13 +159,17 @@ static SUNXI_CCU_NM_WITH_FRAC_GATE_LOCK(pll_de_clk, "pll-de",
 					BIT(28),	/* lock */
 					CLK_SET_RATE_UNGATE);
 
-/* TODO: Fix N */
-static SUNXI_CCU_N_WITH_GATE_LOCK(pll_ddr1_clk, "pll-ddr1",
-				  "osc24M", 0x04c,
-				  8, 6,			/* N */
-				  BIT(31),		/* gate */
-				  BIT(28),		/* lock */
-				  CLK_SET_RATE_UNGATE);
+static struct ccu_mult pll_ddr1_clk = {
+	.enable	= BIT(31),
+	.lock	= BIT(28),
+	.mult	= _SUNXI_CCU_MULT_OFFSET_MIN_MAX(8, 6, 0, 12, 0),
+	.common	= {
+		.reg		= 0x04c,
+		.hw.init	= CLK_HW_INIT("pll-ddr1", "osc24M",
+					      &ccu_mult_ops,
+					      CLK_SET_RATE_UNGATE),
+	},
+};
 
 static const char * const cpux_parents[] = { "osc32k", "osc24M",
 					     "pll-cpux" , "pll-cpux" };

drivers/clk/sunxi-ng/ccu-sun8i-h3.c

@@ -300,8 +300,10 @@ static SUNXI_CCU_GATE(bus_uart2_clk,	"bus-uart2",	"apb2",
 		      0x06c, BIT(18), 0);
 static SUNXI_CCU_GATE(bus_uart3_clk,	"bus-uart3",	"apb2",
 		      0x06c, BIT(19), 0);
-static SUNXI_CCU_GATE(bus_scr_clk,	"bus-scr",	"apb2",
+static SUNXI_CCU_GATE(bus_scr0_clk,	"bus-scr0",	"apb2",
 		      0x06c, BIT(20), 0);
+static SUNXI_CCU_GATE(bus_scr1_clk,	"bus-scr1",	"apb2",
+		      0x06c, BIT(21), 0);
 
 static SUNXI_CCU_GATE(bus_ephy_clk,	"bus-ephy",	"ahb1",
 		      0x070, BIT(0), 0);
@@ -546,7 +548,7 @@ static struct ccu_common *sun8i_h3_ccu_clks[] = {
 	&bus_uart1_clk.common,
 	&bus_uart2_clk.common,
 	&bus_uart3_clk.common,
-	&bus_scr_clk.common,
+	&bus_scr0_clk.common,
 	&bus_ephy_clk.common,
 	&bus_dbg_clk.common,
 	&ths_clk.common,
@@ -597,6 +599,114 @@ static struct ccu_common *sun8i_h3_ccu_clks[] = {
 	&gpu_clk.common,
 };
 
+static struct ccu_common *sun50i_h5_ccu_clks[] = {
+	&pll_cpux_clk.common,
+	&pll_audio_base_clk.common,
+	&pll_video_clk.common,
+	&pll_ve_clk.common,
+	&pll_ddr_clk.common,
+	&pll_periph0_clk.common,
+	&pll_gpu_clk.common,
+	&pll_periph1_clk.common,
+	&pll_de_clk.common,
+	&cpux_clk.common,
+	&axi_clk.common,
+	&ahb1_clk.common,
+	&apb1_clk.common,
+	&apb2_clk.common,
+	&ahb2_clk.common,
+	&bus_ce_clk.common,
+	&bus_dma_clk.common,
+	&bus_mmc0_clk.common,
+	&bus_mmc1_clk.common,
+	&bus_mmc2_clk.common,
+	&bus_nand_clk.common,
+	&bus_dram_clk.common,
+	&bus_emac_clk.common,
+	&bus_ts_clk.common,
+	&bus_hstimer_clk.common,
+	&bus_spi0_clk.common,
+	&bus_spi1_clk.common,
+	&bus_otg_clk.common,
+	&bus_ehci0_clk.common,
+	&bus_ehci1_clk.common,
+	&bus_ehci2_clk.common,
+	&bus_ehci3_clk.common,
+	&bus_ohci0_clk.common,
+	&bus_ohci1_clk.common,
+	&bus_ohci2_clk.common,
+	&bus_ohci3_clk.common,
+	&bus_ve_clk.common,
+	&bus_tcon0_clk.common,
+	&bus_tcon1_clk.common,
+	&bus_deinterlace_clk.common,
+	&bus_csi_clk.common,
+	&bus_tve_clk.common,
+	&bus_hdmi_clk.common,
+	&bus_de_clk.common,
+	&bus_gpu_clk.common,
+	&bus_msgbox_clk.common,
+	&bus_spinlock_clk.common,
+	&bus_codec_clk.common,
+	&bus_spdif_clk.common,
+	&bus_pio_clk.common,
+	&bus_ths_clk.common,
+	&bus_i2s0_clk.common,
+	&bus_i2s1_clk.common,
+	&bus_i2s2_clk.common,
+	&bus_i2c0_clk.common,
+	&bus_i2c1_clk.common,
+	&bus_i2c2_clk.common,
+	&bus_uart0_clk.common,
+	&bus_uart1_clk.common,
+	&bus_uart2_clk.common,
+	&bus_uart3_clk.common,
+	&bus_scr0_clk.common,
+	&bus_scr1_clk.common,
+	&bus_ephy_clk.common,
+	&bus_dbg_clk.common,
+	&ths_clk.common,
+	&nand_clk.common,
+	&mmc0_clk.common,
+	&mmc1_clk.common,
+	&mmc2_clk.common,
+	&ts_clk.common,
+	&ce_clk.common,
+	&spi0_clk.common,
+	&spi1_clk.common,
+	&i2s0_clk.common,
+	&i2s1_clk.common,
+	&i2s2_clk.common,
+	&spdif_clk.common,
+	&usb_phy0_clk.common,
+	&usb_phy1_clk.common,
+	&usb_phy2_clk.common,
+	&usb_phy3_clk.common,
+	&usb_ohci0_clk.common,
+	&usb_ohci1_clk.common,
+	&usb_ohci2_clk.common,
+	&usb_ohci3_clk.common,
+	&dram_clk.common,
+	&dram_ve_clk.common,
+	&dram_csi_clk.common,
+	&dram_deinterlace_clk.common,
+	&dram_ts_clk.common,
+	&de_clk.common,
+	&tcon_clk.common,
+	&tve_clk.common,
+	&deinterlace_clk.common,
+	&csi_misc_clk.common,
+	&csi_sclk_clk.common,
+	&csi_mclk_clk.common,
+	&ve_clk.common,
+	&ac_dig_clk.common,
+	&avs_clk.common,
+	&hdmi_clk.common,
+	&hdmi_ddc_clk.common,
+	&mbus_clk.common,
+	&gpu_clk.common,
+};
+
 /* We hardcode the divider to 4 for now */
 static CLK_FIXED_FACTOR(pll_audio_clk, "pll-audio",
 			"pll-audio-base", 4, 1, CLK_SET_RATE_PARENT);
@@ -677,7 +787,7 @@ static struct clk_hw_onecell_data sun8i_h3_hw_clks = {
 		[CLK_BUS_UART1]		= &bus_uart1_clk.common.hw,
 		[CLK_BUS_UART2]		= &bus_uart2_clk.common.hw,
 		[CLK_BUS_UART3]		= &bus_uart3_clk.common.hw,
-		[CLK_BUS_SCR]		= &bus_scr_clk.common.hw,
+		[CLK_BUS_SCR0]		= &bus_scr0_clk.common.hw,
 		[CLK_BUS_EPHY]		= &bus_ephy_clk.common.hw,
 		[CLK_BUS_DBG]		= &bus_dbg_clk.common.hw,
 		[CLK_THS]		= &ths_clk.common.hw,
@@ -727,7 +837,123 @@ static struct clk_hw_onecell_data sun8i_h3_hw_clks = {
 		[CLK_MBUS]		= &mbus_clk.common.hw,
 		[CLK_GPU]		= &gpu_clk.common.hw,
 	},
-	.num	= CLK_NUMBER,
+	.num	= CLK_NUMBER_H3,
+};
+
+static struct clk_hw_onecell_data sun50i_h5_hw_clks = {
+	.hws	= {
+		[CLK_PLL_CPUX]		= &pll_cpux_clk.common.hw,
+		[CLK_PLL_AUDIO_BASE]	= &pll_audio_base_clk.common.hw,
+		[CLK_PLL_AUDIO]		= &pll_audio_clk.hw,
+		[CLK_PLL_AUDIO_2X]	= &pll_audio_2x_clk.hw,
+		[CLK_PLL_AUDIO_4X]	= &pll_audio_4x_clk.hw,
+		[CLK_PLL_AUDIO_8X]	= &pll_audio_8x_clk.hw,
+		[CLK_PLL_VIDEO]		= &pll_video_clk.common.hw,
+		[CLK_PLL_VE]		= &pll_ve_clk.common.hw,
+		[CLK_PLL_DDR]		= &pll_ddr_clk.common.hw,
+		[CLK_PLL_PERIPH0]	= &pll_periph0_clk.common.hw,
+		[CLK_PLL_PERIPH0_2X]	= &pll_periph0_2x_clk.hw,
+		[CLK_PLL_GPU]		= &pll_gpu_clk.common.hw,
+		[CLK_PLL_PERIPH1]	= &pll_periph1_clk.common.hw,
+		[CLK_PLL_DE]		= &pll_de_clk.common.hw,
+		[CLK_CPUX]		= &cpux_clk.common.hw,
+		[CLK_AXI]		= &axi_clk.common.hw,
+		[CLK_AHB1]		= &ahb1_clk.common.hw,
+		[CLK_APB1]		= &apb1_clk.common.hw,
+		[CLK_APB2]		= &apb2_clk.common.hw,
+		[CLK_AHB2]		= &ahb2_clk.common.hw,
+		[CLK_BUS_CE]		= &bus_ce_clk.common.hw,
+		[CLK_BUS_DMA]		= &bus_dma_clk.common.hw,
+		[CLK_BUS_MMC0]		= &bus_mmc0_clk.common.hw,
+		[CLK_BUS_MMC1]		= &bus_mmc1_clk.common.hw,
+		[CLK_BUS_MMC2]		= &bus_mmc2_clk.common.hw,
+		[CLK_BUS_NAND]		= &bus_nand_clk.common.hw,
+		[CLK_BUS_DRAM]		= &bus_dram_clk.common.hw,
+		[CLK_BUS_EMAC]		= &bus_emac_clk.common.hw,
+		[CLK_BUS_TS]		= &bus_ts_clk.common.hw,
+		[CLK_BUS_HSTIMER]	= &bus_hstimer_clk.common.hw,
+		[CLK_BUS_SPI0]		= &bus_spi0_clk.common.hw,
+		[CLK_BUS_SPI1]		= &bus_spi1_clk.common.hw,
+		[CLK_BUS_OTG]		= &bus_otg_clk.common.hw,
+		[CLK_BUS_EHCI0]		= &bus_ehci0_clk.common.hw,
+		[CLK_BUS_EHCI1]		= &bus_ehci1_clk.common.hw,
+		[CLK_BUS_EHCI2]		= &bus_ehci2_clk.common.hw,
+		[CLK_BUS_EHCI3]		= &bus_ehci3_clk.common.hw,
+		[CLK_BUS_OHCI0]		= &bus_ohci0_clk.common.hw,
+		[CLK_BUS_OHCI1]		= &bus_ohci1_clk.common.hw,
+		[CLK_BUS_OHCI2]		= &bus_ohci2_clk.common.hw,
+		[CLK_BUS_OHCI3]		= &bus_ohci3_clk.common.hw,
+		[CLK_BUS_VE]		= &bus_ve_clk.common.hw,
+		[CLK_BUS_TCON0]		= &bus_tcon0_clk.common.hw,
+		[CLK_BUS_TCON1]		= &bus_tcon1_clk.common.hw,
+		[CLK_BUS_DEINTERLACE]	= &bus_deinterlace_clk.common.hw,
+		[CLK_BUS_CSI]		= &bus_csi_clk.common.hw,
+		[CLK_BUS_TVE]		= &bus_tve_clk.common.hw,
+		[CLK_BUS_HDMI]		= &bus_hdmi_clk.common.hw,
+		[CLK_BUS_DE]		= &bus_de_clk.common.hw,
+		[CLK_BUS_GPU]		= &bus_gpu_clk.common.hw,
+		[CLK_BUS_MSGBOX]	= &bus_msgbox_clk.common.hw,
+		[CLK_BUS_SPINLOCK]	= &bus_spinlock_clk.common.hw,
+		[CLK_BUS_CODEC]		= &bus_codec_clk.common.hw,
+		[CLK_BUS_SPDIF]		= &bus_spdif_clk.common.hw,
+		[CLK_BUS_PIO]		= &bus_pio_clk.common.hw,
+		[CLK_BUS_THS]		= &bus_ths_clk.common.hw,
+		[CLK_BUS_I2S0]		= &bus_i2s0_clk.common.hw,
+		[CLK_BUS_I2S1]		= &bus_i2s1_clk.common.hw,
+		[CLK_BUS_I2S2]		= &bus_i2s2_clk.common.hw,
+		[CLK_BUS_I2C0]		= &bus_i2c0_clk.common.hw,
+		[CLK_BUS_I2C1]		= &bus_i2c1_clk.common.hw,
+		[CLK_BUS_I2C2]		= &bus_i2c2_clk.common.hw,
+		[CLK_BUS_UART0]		= &bus_uart0_clk.common.hw,
+		[CLK_BUS_UART1]		= &bus_uart1_clk.common.hw,
+		[CLK_BUS_UART2]		= &bus_uart2_clk.common.hw,
+		[CLK_BUS_UART3]		= &bus_uart3_clk.common.hw,
+		[CLK_BUS_SCR0]		= &bus_scr0_clk.common.hw,
+		[CLK_BUS_SCR1]		= &bus_scr1_clk.common.hw,
+		[CLK_BUS_EPHY]		= &bus_ephy_clk.common.hw,
+		[CLK_BUS_DBG]		= &bus_dbg_clk.common.hw,
+		[CLK_THS]		= &ths_clk.common.hw,
+		[CLK_NAND]		= &nand_clk.common.hw,
+		[CLK_MMC0]		= &mmc0_clk.common.hw,
+		[CLK_MMC1]		= &mmc1_clk.common.hw,
+		[CLK_MMC2]		= &mmc2_clk.common.hw,
+		[CLK_TS]		= &ts_clk.common.hw,
+		[CLK_CE]		= &ce_clk.common.hw,
+		[CLK_SPI0]		= &spi0_clk.common.hw,
+		[CLK_SPI1]		= &spi1_clk.common.hw,
+		[CLK_I2S0]		= &i2s0_clk.common.hw,
+		[CLK_I2S1]		= &i2s1_clk.common.hw,
+		[CLK_I2S2]		= &i2s2_clk.common.hw,
+		[CLK_SPDIF]		= &spdif_clk.common.hw,
+		[CLK_USB_PHY0]		= &usb_phy0_clk.common.hw,
+		[CLK_USB_PHY1]		= &usb_phy1_clk.common.hw,
+		[CLK_USB_PHY2]		= &usb_phy2_clk.common.hw,
+		[CLK_USB_PHY3]		= &usb_phy3_clk.common.hw,
+		[CLK_USB_OHCI0]		= &usb_ohci0_clk.common.hw,
+		[CLK_USB_OHCI1]		= &usb_ohci1_clk.common.hw,
+		[CLK_USB_OHCI2]		= &usb_ohci2_clk.common.hw,
+		[CLK_USB_OHCI3]		= &usb_ohci3_clk.common.hw,
+		[CLK_DRAM]		= &dram_clk.common.hw,
+		[CLK_DRAM_VE]		= &dram_ve_clk.common.hw,
+		[CLK_DRAM_CSI]		= &dram_csi_clk.common.hw,
+		[CLK_DRAM_DEINTERLACE]	= &dram_deinterlace_clk.common.hw,
+		[CLK_DRAM_TS]		= &dram_ts_clk.common.hw,
+		[CLK_DE]		= &de_clk.common.hw,
+		[CLK_TCON0]		= &tcon_clk.common.hw,
+		[CLK_TVE]		= &tve_clk.common.hw,
+		[CLK_DEINTERLACE]	= &deinterlace_clk.common.hw,
+		[CLK_CSI_MISC]		= &csi_misc_clk.common.hw,
+		[CLK_CSI_SCLK]		= &csi_sclk_clk.common.hw,
+		[CLK_CSI_MCLK]		= &csi_mclk_clk.common.hw,
+		[CLK_VE]		= &ve_clk.common.hw,
+		[CLK_AC_DIG]		= &ac_dig_clk.common.hw,
+		[CLK_AVS]		= &avs_clk.common.hw,
+		[CLK_HDMI]		= &hdmi_clk.common.hw,
+		[CLK_HDMI_DDC]		= &hdmi_ddc_clk.common.hw,
+		[CLK_MBUS]		= &mbus_clk.common.hw,
+		[CLK_GPU]		= &gpu_clk.common.hw,
+	},
+	.num	= CLK_NUMBER_H5,
 };
 
 static struct ccu_reset_map sun8i_h3_ccu_resets[] = {
@@ -790,7 +1016,71 @@ static struct ccu_reset_map sun8i_h3_ccu_resets[] = {
 	[RST_BUS_UART1]		=  { 0x2d8, BIT(17) },
 	[RST_BUS_UART2]		=  { 0x2d8, BIT(18) },
 	[RST_BUS_UART3]		=  { 0x2d8, BIT(19) },
-	[RST_BUS_SCR]		=  { 0x2d8, BIT(20) },
+	[RST_BUS_SCR0]		=  { 0x2d8, BIT(20) },
+};
+
+static struct ccu_reset_map sun50i_h5_ccu_resets[] = {
+	[RST_USB_PHY0]		=  { 0x0cc, BIT(0) },
+	[RST_USB_PHY1]		=  { 0x0cc, BIT(1) },
+	[RST_USB_PHY2]		=  { 0x0cc, BIT(2) },
+	[RST_USB_PHY3]		=  { 0x0cc, BIT(3) },
+
+	[RST_MBUS]		=  { 0x0fc, BIT(31) },
+
+	[RST_BUS_CE]		=  { 0x2c0, BIT(5) },
+	[RST_BUS_DMA]		=  { 0x2c0, BIT(6) },
+	[RST_BUS_MMC0]		=  { 0x2c0, BIT(8) },
+	[RST_BUS_MMC1]		=  { 0x2c0, BIT(9) },
+	[RST_BUS_MMC2]		=  { 0x2c0, BIT(10) },
+	[RST_BUS_NAND]		=  { 0x2c0, BIT(13) },
+	[RST_BUS_DRAM]		=  { 0x2c0, BIT(14) },
+	[RST_BUS_EMAC]		=  { 0x2c0, BIT(17) },
+	[RST_BUS_TS]		=  { 0x2c0, BIT(18) },
+	[RST_BUS_HSTIMER]	=  { 0x2c0, BIT(19) },
+	[RST_BUS_SPI0]		=  { 0x2c0, BIT(20) },
+	[RST_BUS_SPI1]		=  { 0x2c0, BIT(21) },
+	[RST_BUS_OTG]		=  { 0x2c0, BIT(23) },
+	[RST_BUS_EHCI0]		=  { 0x2c0, BIT(24) },
+	[RST_BUS_EHCI1]		=  { 0x2c0, BIT(25) },
+	[RST_BUS_EHCI2]		=  { 0x2c0, BIT(26) },
+	[RST_BUS_EHCI3]		=  { 0x2c0, BIT(27) },
+	[RST_BUS_OHCI0]		=  { 0x2c0, BIT(28) },
+	[RST_BUS_OHCI1]		=  { 0x2c0, BIT(29) },
+	[RST_BUS_OHCI2]		=  { 0x2c0, BIT(30) },
+	[RST_BUS_OHCI3]		=  { 0x2c0, BIT(31) },
+
+	[RST_BUS_VE]		=  { 0x2c4, BIT(0) },
+	[RST_BUS_TCON0]		=  { 0x2c4, BIT(3) },
+	[RST_BUS_TCON1]		=  { 0x2c4, BIT(4) },
+	[RST_BUS_DEINTERLACE]	=  { 0x2c4, BIT(5) },
+	[RST_BUS_CSI]		=  { 0x2c4, BIT(8) },
+	[RST_BUS_TVE]		=  { 0x2c4, BIT(9) },
+	[RST_BUS_HDMI0]		=  { 0x2c4, BIT(10) },
+	[RST_BUS_HDMI1]		=  { 0x2c4, BIT(11) },
+	[RST_BUS_DE]		=  { 0x2c4, BIT(12) },
+	[RST_BUS_GPU]		=  { 0x2c4, BIT(20) },
+	[RST_BUS_MSGBOX]	=  { 0x2c4, BIT(21) },
+	[RST_BUS_SPINLOCK]	=  { 0x2c4, BIT(22) },
+	[RST_BUS_DBG]		=  { 0x2c4, BIT(31) },
+
+	[RST_BUS_EPHY]		=  { 0x2c8, BIT(2) },
+
+	[RST_BUS_CODEC]		=  { 0x2d0, BIT(0) },
+	[RST_BUS_SPDIF]		=  { 0x2d0, BIT(1) },
+	[RST_BUS_THS]		=  { 0x2d0, BIT(8) },
+	[RST_BUS_I2S0]		=  { 0x2d0, BIT(12) },
+	[RST_BUS_I2S1]		=  { 0x2d0, BIT(13) },
+	[RST_BUS_I2S2]		=  { 0x2d0, BIT(14) },
+
+	[RST_BUS_I2C0]		=  { 0x2d8, BIT(0) },
+	[RST_BUS_I2C1]		=  { 0x2d8, BIT(1) },
+	[RST_BUS_I2C2]		=  { 0x2d8, BIT(2) },
+	[RST_BUS_UART0]		=  { 0x2d8, BIT(16) },
+	[RST_BUS_UART1]		=  { 0x2d8, BIT(17) },
+	[RST_BUS_UART2]		=  { 0x2d8, BIT(18) },
+	[RST_BUS_UART3]		=  { 0x2d8, BIT(19) },
+	[RST_BUS_SCR0]		=  { 0x2d8, BIT(20) },
+	[RST_BUS_SCR1]		=  { 0x2d8, BIT(20) },
 };
 
 static const struct sunxi_ccu_desc sun8i_h3_ccu_desc = {
@@ -803,6 +1093,16 @@ static const struct sunxi_ccu_desc sun8i_h3_ccu_desc = {
 	.num_resets	= ARRAY_SIZE(sun8i_h3_ccu_resets),
 };
 
+static const struct sunxi_ccu_desc sun50i_h5_ccu_desc = {
+	.ccu_clks	= sun50i_h5_ccu_clks,
+	.num_ccu_clks	= ARRAY_SIZE(sun50i_h5_ccu_clks),
+
+	.hw_clks	= &sun50i_h5_hw_clks,
+
+	.resets		= sun50i_h5_ccu_resets,
+	.num_resets	= ARRAY_SIZE(sun50i_h5_ccu_resets),
+};
+
 static struct ccu_mux_nb sun8i_h3_cpu_nb = {
 	.common		= &cpux_clk.common,
 	.cm		= &cpux_clk.mux,
@@ -810,7 +1110,8 @@ static struct ccu_mux_nb sun8i_h3_cpu_nb = {
 	.bypass_index	= 1, /* index of 24 MHz oscillator */
 };
 
-static void __init sun8i_h3_ccu_setup(struct device_node *node)
+static void __init sunxi_h3_h5_ccu_init(struct device_node *node,
+					const struct sunxi_ccu_desc *desc)
 {
 	void __iomem *reg;
 	u32 val;
@@ -827,10 +1128,22 @@ static void __init sun8i_h3_ccu_setup(struct device_node *node)
 	val &= ~GENMASK(19, 16);
 	writel(val | (3 << 16), reg + SUN8I_H3_PLL_AUDIO_REG);
 
-	sunxi_ccu_probe(node, reg, &sun8i_h3_ccu_desc);
+	sunxi_ccu_probe(node, reg, desc);
 
 	ccu_mux_notifier_register(pll_cpux_clk.common.hw.clk,
 				  &sun8i_h3_cpu_nb);
 }
+
+static void __init sun8i_h3_ccu_setup(struct device_node *node)
+{
+	sunxi_h3_h5_ccu_init(node, &sun8i_h3_ccu_desc);
+}
 CLK_OF_DECLARE(sun8i_h3_ccu, "allwinner,sun8i-h3-ccu",
 	       sun8i_h3_ccu_setup);
+
+static void __init sun50i_h5_ccu_setup(struct device_node *node)
+{
+	sunxi_h3_h5_ccu_init(node, &sun50i_h5_ccu_desc);
+}
+CLK_OF_DECLARE(sun50i_h5_ccu, "allwinner,sun50i-h5-ccu",
+	       sun50i_h5_ccu_setup);

drivers/clk/sunxi-ng/ccu-sun8i-h3.h

@@ -57,6 +57,7 @@
 
 /* And the GPU module clock is exported */
 
-#define CLK_NUMBER		(CLK_GPU + 1)
+#define CLK_NUMBER_H3		(CLK_GPU + 1)
+#define CLK_NUMBER_H5		(CLK_BUS_SCR1 + 1)
 
 #endif /* _CCU_SUN8I_H3_H_ */

drivers/clk/sunxi-ng/ccu-sun8i-r.c

@@ -0,0 +1,213 @@
+/*
+ * Copyright (c) 2016 Icenowy Zheng <icenowy@aosc.xyz>
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/clk-provider.h>
+#include <linux/of_address.h>
+#include <linux/platform_device.h>
+
+#include "ccu_common.h"
+#include "ccu_reset.h"
+
+#include "ccu_div.h"
+#include "ccu_gate.h"
+#include "ccu_mp.h"
+#include "ccu_nm.h"
+
+#include "ccu-sun8i-r.h"
+
+static const char * const ar100_parents[] = { "osc32k", "osc24M",
+					     "pll-periph0", "iosc" };
+
+static struct ccu_div ar100_clk = {
+	.div		= _SUNXI_CCU_DIV_FLAGS(4, 2, CLK_DIVIDER_POWER_OF_TWO),
+
+	.mux		= {
+		.shift	= 16,
+		.width	= 2,
+
+		.variable_prediv	= {
+			.index	= 2,
+			.shift	= 8,
+			.width	= 5,
+		},
+	},
+
+	.common		= {
+		.reg		= 0x00,
+		.features	= CCU_FEATURE_VARIABLE_PREDIV,
+		.hw.init	= CLK_HW_INIT_PARENTS("ar100",
+						      ar100_parents,
+						      &ccu_div_ops,
+						      0),
+	},
+};
+
+static CLK_FIXED_FACTOR(ahb0_clk, "ahb0", "ar100", 1, 1, 0);
+
+static struct ccu_div apb0_clk = {
+	.div		= _SUNXI_CCU_DIV_FLAGS(0, 2, CLK_DIVIDER_POWER_OF_TWO),
+
+	.common		= {
+		.reg		= 0x0c,
+		.hw.init	= CLK_HW_INIT("apb0",
+					      "ahb0",
+					      &ccu_div_ops,
+					      0),
+	},
+};
+
+static SUNXI_CCU_GATE(apb0_pio_clk,	"apb0-pio",	"apb0",
+		      0x28, BIT(0), 0);
+static SUNXI_CCU_GATE(apb0_ir_clk,	"apb0-ir",	"apb0",
+		      0x28, BIT(1), 0);
+static SUNXI_CCU_GATE(apb0_timer_clk,	"apb0-timer",	"apb0",
+		      0x28, BIT(2), 0);
+static SUNXI_CCU_GATE(apb0_rsb_clk,	"apb0-rsb",	"apb0",
+		      0x28, BIT(3), 0);
+static SUNXI_CCU_GATE(apb0_uart_clk,	"apb0-uart",	"apb0",
+		      0x28, BIT(4), 0);
+static SUNXI_CCU_GATE(apb0_i2c_clk,	"apb0-i2c",	"apb0",
+		      0x28, BIT(6), 0);
+static SUNXI_CCU_GATE(apb0_twd_clk,	"apb0-twd",	"apb0",
+		      0x28, BIT(7), 0);
+
+static const char * const r_mod0_default_parents[] = { "osc32K", "osc24M" };
+static SUNXI_CCU_MP_WITH_MUX_GATE(ir_clk, "ir",
+				  r_mod0_default_parents, 0x54,
+				  0, 4,		/* M */
+				  16, 2,	/* P */
+				  24, 2,	/* mux */
+				  BIT(31),	/* gate */
+				  0);
+
+static struct ccu_common *sun8i_h3_r_ccu_clks[] = {
+	&ar100_clk.common,
+	&apb0_clk.common,
+	&apb0_pio_clk.common,
+	&apb0_ir_clk.common,
+	&apb0_timer_clk.common,
+	&apb0_uart_clk.common,
+	&apb0_i2c_clk.common,
+	&apb0_twd_clk.common,
+	&ir_clk.common,
+};
+
+static struct ccu_common *sun50i_a64_r_ccu_clks[] = {
+	&ar100_clk.common,
+	&apb0_clk.common,
+	&apb0_pio_clk.common,
+	&apb0_ir_clk.common,
+	&apb0_timer_clk.common,
+	&apb0_rsb_clk.common,
+	&apb0_uart_clk.common,
+	&apb0_i2c_clk.common,
+	&apb0_twd_clk.common,
+	&ir_clk.common,
+};
+
+static struct clk_hw_onecell_data sun8i_h3_r_hw_clks = {
+	.hws	= {
+		[CLK_AR100]		= &ar100_clk.common.hw,
+		[CLK_AHB0]		= &ahb0_clk.hw,
+		[CLK_APB0]		= &apb0_clk.common.hw,
+		[CLK_APB0_PIO]		= &apb0_pio_clk.common.hw,
+		[CLK_APB0_IR]		= &apb0_ir_clk.common.hw,
+		[CLK_APB0_TIMER]	= &apb0_timer_clk.common.hw,
+		[CLK_APB0_UART]		= &apb0_uart_clk.common.hw,
+		[CLK_APB0_I2C]		= &apb0_i2c_clk.common.hw,
+		[CLK_APB0_TWD]		= &apb0_twd_clk.common.hw,
+		[CLK_IR]		= &ir_clk.common.hw,
+	},
+	.num	= CLK_NUMBER,
+};
+
+static struct clk_hw_onecell_data sun50i_a64_r_hw_clks = {
+	.hws	= {
+		[CLK_AR100]		= &ar100_clk.common.hw,
+		[CLK_AHB0]		= &ahb0_clk.hw,
+		[CLK_APB0]		= &apb0_clk.common.hw,
+		[CLK_APB0_PIO]		= &apb0_pio_clk.common.hw,
+		[CLK_APB0_IR]		= &apb0_ir_clk.common.hw,
+		[CLK_APB0_TIMER]	= &apb0_timer_clk.common.hw,
+		[CLK_APB0_RSB]		= &apb0_rsb_clk.common.hw,
+		[CLK_APB0_UART]		= &apb0_uart_clk.common.hw,
+		[CLK_APB0_I2C]		= &apb0_i2c_clk.common.hw,
+		[CLK_APB0_TWD]		= &apb0_twd_clk.common.hw,
+		[CLK_IR]		= &ir_clk.common.hw,
+	},
+	.num	= CLK_NUMBER,
+};
+
+static struct ccu_reset_map sun8i_h3_r_ccu_resets[] = {
+	[RST_APB0_IR]		=  { 0xb0, BIT(1) },
+	[RST_APB0_TIMER]	=  { 0xb0, BIT(2) },
+	[RST_APB0_UART]		=  { 0xb0, BIT(4) },
+	[RST_APB0_I2C]		=  { 0xb0, BIT(6) },
+};
+
+static struct ccu_reset_map sun50i_a64_r_ccu_resets[] = {
+	[RST_APB0_IR]		=  { 0xb0, BIT(1) },
+	[RST_APB0_TIMER]	=  { 0xb0, BIT(2) },
+	[RST_APB0_RSB]		=  { 0xb0, BIT(3) },
+	[RST_APB0_UART]		=  { 0xb0, BIT(4) },
+	[RST_APB0_I2C]		=  { 0xb0, BIT(6) },
+};
+
+static const struct sunxi_ccu_desc sun8i_h3_r_ccu_desc = {
+	.ccu_clks	= sun8i_h3_r_ccu_clks,
+	.num_ccu_clks	= ARRAY_SIZE(sun8i_h3_r_ccu_clks),
+
+	.hw_clks	= &sun8i_h3_r_hw_clks,
+
+	.resets		= sun8i_h3_r_ccu_resets,
+	.num_resets	= ARRAY_SIZE(sun8i_h3_r_ccu_resets),
+};
+
+static const struct sunxi_ccu_desc sun50i_a64_r_ccu_desc = {
+	.ccu_clks	= sun50i_a64_r_ccu_clks,
+	.num_ccu_clks	= ARRAY_SIZE(sun50i_a64_r_ccu_clks),
+
+	.hw_clks	= &sun50i_a64_r_hw_clks,
+
+	.resets		= sun50i_a64_r_ccu_resets,
+	.num_resets	= ARRAY_SIZE(sun50i_a64_r_ccu_resets),
+};
+
+static void __init sunxi_r_ccu_init(struct device_node *node,
+				    const struct sunxi_ccu_desc *desc)
+{
+	void __iomem *reg;
+
+	reg = of_io_request_and_map(node, 0, of_node_full_name(node));
+	if (IS_ERR(reg)) {
+		pr_err("%s: Could not map the clock registers\n",
+		       of_node_full_name(node));
+		return;
+	}
+
+	sunxi_ccu_probe(node, reg, desc);
+}
+
+static void __init sun8i_h3_r_ccu_setup(struct device_node *node)
+{
+	sunxi_r_ccu_init(node, &sun8i_h3_r_ccu_desc);
+}
+CLK_OF_DECLARE(sun8i_h3_r_ccu, "allwinner,sun8i-h3-r-ccu",
+	       sun8i_h3_r_ccu_setup);
+
+static void __init sun50i_a64_r_ccu_setup(struct device_node *node)
+{
+	sunxi_r_ccu_init(node, &sun50i_a64_r_ccu_desc);
+}
+CLK_OF_DECLARE(sun50i_a64_r_ccu, "allwinner,sun50i-a64-r-ccu",
+	       sun50i_a64_r_ccu_setup);

drivers/clk/sunxi-ng/ccu-sun8i-r.h

@@ -0,0 +1,27 @@
+/*
+ * Copyright 2016 Icenowy <icenowy@aosc.xyz>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef _CCU_SUN8I_R_H
+#define _CCU_SUN8I_R_H_
+
+#include <dt-bindings/clock/sun8i-r-ccu.h>
+#include <dt-bindings/reset/sun8i-r-ccu.h>
+
+/* AHB/APB bus clocks are not exported */
+#define CLK_AHB0	1
+#define CLK_APB0	2
+
+#define CLK_NUMBER	(CLK_APB0_TWD + 1)
+
+#endif /* _CCU_SUN8I_R_H */

drivers/clk/sunxi-ng/ccu-sun9i-a80.c

@@ -29,41 +29,41 @@
 
 #define CCU_SUN9I_LOCK_REG	0x09c
 
-static struct clk_div_table pll_cpux_p_div_table[] = {
-	{ .val = 0, .div = 1 },
-	{ .val = 1, .div = 4 },
-	{ /* Sentinel */ },
-};
-
 /*
- * The CPU PLLs are actually NP clocks, but P is /1 or /4, so here we
- * use the NM clocks with a divider table for M.
+ * The CPU PLLs are actually NP clocks, with P being /1 or /4. However
+ * P should only be used for output frequencies lower than 228 MHz.
+ * Neither mainline Linux, U-boot, nor the vendor BSPs use these.
+ *
+ * For now we can just model it as a multiplier clock, and force P to /1.
  */
-static struct ccu_nm pll_c0cpux_clk = {
+#define SUN9I_A80_PLL_C0CPUX_REG	0x000
+#define SUN9I_A80_PLL_C1CPUX_REG	0x004
+
+static struct ccu_mult pll_c0cpux_clk = {
 	.enable		= BIT(31),
 	.lock		= BIT(0),
-	.n		= _SUNXI_CCU_MULT_OFFSET_MIN_MAX(8, 8, 0, 12, 0),
-	.m		= _SUNXI_CCU_DIV_TABLE(16, 1, pll_cpux_p_div_table),
+	.mult		= _SUNXI_CCU_MULT_OFFSET_MIN_MAX(8, 8, 0, 12, 0),
 	.common		= {
-		.reg		= 0x000,
+		.reg		= SUN9I_A80_PLL_C0CPUX_REG,
 		.lock_reg	= CCU_SUN9I_LOCK_REG,
 		.features	= CCU_FEATURE_LOCK_REG,
 		.hw.init	= CLK_HW_INIT("pll-c0cpux", "osc24M",
-					      &ccu_nm_ops, CLK_SET_RATE_UNGATE),
+					      &ccu_mult_ops,
+					      CLK_SET_RATE_UNGATE),
 	},
 };
 
-static struct ccu_nm pll_c1cpux_clk = {
+static struct ccu_mult pll_c1cpux_clk = {
 	.enable		= BIT(31),
 	.lock		= BIT(1),
-	.n		= _SUNXI_CCU_MULT_OFFSET_MIN_MAX(8, 8, 0, 12, 0),
-	.m		= _SUNXI_CCU_DIV_TABLE(16, 1, pll_cpux_p_div_table),
+	.mult		= _SUNXI_CCU_MULT_OFFSET_MIN_MAX(8, 8, 0, 12, 0),
 	.common		= {
-		.reg		= 0x004,
+		.reg		= SUN9I_A80_PLL_C1CPUX_REG,
 		.lock_reg	= CCU_SUN9I_LOCK_REG,
 		.features	= CCU_FEATURE_LOCK_REG,
 		.hw.init	= CLK_HW_INIT("pll-c1cpux", "osc24M",
-					      &ccu_nm_ops, CLK_SET_RATE_UNGATE),
+					      &ccu_mult_ops,
+					      CLK_SET_RATE_UNGATE),
 	},
 };
 
@@ -1189,6 +1189,36 @@ static const struct sunxi_ccu_desc sun9i_a80_ccu_desc = {
 	.num_resets	= ARRAY_SIZE(sun9i_a80_ccu_resets),
 };
 
+#define SUN9I_A80_PLL_P_SHIFT	16
+#define SUN9I_A80_PLL_N_SHIFT	8
+#define SUN9I_A80_PLL_N_WIDTH	8
+
+static void sun9i_a80_cpu_pll_fixup(void __iomem *reg)
+{
+	u32 val = readl(reg);
+
+	/* bail out if P divider is not used */
+	if (!(val & BIT(SUN9I_A80_PLL_P_SHIFT)))
+		return;
+
+	/*
+	 * If P is used, output should be less than 288 MHz. When we
+	 * set P to 1, we should also decrease the multiplier so the
+	 * output doesn't go out of range, but not too much such that
+	 * the multiplier stays above 12, the minimal operation value.
+	 *
+	 * To keep it simple, set the multiplier to 17, the reset value.
+	 */
+	val &= ~GENMASK(SUN9I_A80_PLL_N_SHIFT + SUN9I_A80_PLL_N_WIDTH - 1,
+			SUN9I_A80_PLL_N_SHIFT);
+	val |= 17 << SUN9I_A80_PLL_N_SHIFT;
+
+	/* And clear P */
+	val &= ~BIT(SUN9I_A80_PLL_P_SHIFT);
+
+	writel(val, reg);
+}
+
 static int sun9i_a80_ccu_probe(struct platform_device *pdev)
 {
 	struct resource *res;
@@ -1205,6 +1235,10 @@ static int sun9i_a80_ccu_probe(struct platform_device *pdev)
 	val &= (BIT(16) & BIT(18));
 	writel(val, reg + SUN9I_A80_PLL_AUDIO_REG);
 
+	/* Enforce P = 1 for both CPU cluster PLLs */
+	sun9i_a80_cpu_pll_fixup(reg + SUN9I_A80_PLL_C0CPUX_REG);
+	sun9i_a80_cpu_pll_fixup(reg + SUN9I_A80_PLL_C1CPUX_REG);
+
 	return sunxi_ccu_probe(pdev->dev.of_node, reg, &sun9i_a80_ccu_desc);
 }
 

drivers/clk/sunxi-ng/ccu_common.c

@@ -112,8 +112,8 @@ int sunxi_ccu_probe(struct device_node *node, void __iomem *reg,
 
 		ret = clk_hw_register(NULL, hw);
 		if (ret) {
-			pr_err("Couldn't register clock %s\n",
-			       clk_hw_get_name(hw));
+			pr_err("Couldn't register clock %d - %s\n",
+			       i, clk_hw_get_name(hw));
 			goto err_clk_unreg;
 		}
 	}

drivers/clk/sunxi-ng/ccu_gate.c

@@ -75,8 +75,55 @@ static int ccu_gate_is_enabled(struct clk_hw *hw)
 	return ccu_gate_helper_is_enabled(&cg->common, cg->enable);
 }
 
+static unsigned long ccu_gate_recalc_rate(struct clk_hw *hw,
+					  unsigned long parent_rate)
+{
+	struct ccu_gate *cg = hw_to_ccu_gate(hw);
+	unsigned long rate = parent_rate;
+
+	if (cg->common.features & CCU_FEATURE_ALL_PREDIV)
+		rate /= cg->common.prediv;
+
+	return rate;
+}
+
+static long ccu_gate_round_rate(struct clk_hw *hw, unsigned long rate,
+				unsigned long *prate)
+{
+	struct ccu_gate *cg = hw_to_ccu_gate(hw);
+	int div = 1;
+
+	if (cg->common.features & CCU_FEATURE_ALL_PREDIV)
+		div = cg->common.prediv;
+
+	if (clk_hw_get_flags(hw) & CLK_SET_RATE_PARENT) {
+		unsigned long best_parent = rate;
+
+		if (cg->common.features & CCU_FEATURE_ALL_PREDIV)
+			best_parent *= div;
+		*prate = clk_hw_round_rate(clk_hw_get_parent(hw), best_parent);
+	}
+
+	return *prate / div;
+}
+
+static int ccu_gate_set_rate(struct clk_hw *hw, unsigned long rate,
+			     unsigned long parent_rate)
+{
+	/*
+	 * We must report success but we can do so unconditionally because
+	 * clk_factor_round_rate returns values that ensure this call is a
+	 * nop.
+	 */
+
+	return 0;
+}
+
 const struct clk_ops ccu_gate_ops = {
 	.disable	= ccu_gate_disable,
 	.enable		= ccu_gate_enable,
 	.is_enabled	= ccu_gate_is_enabled,
+	.round_rate	= ccu_gate_round_rate,
+	.set_rate	= ccu_gate_set_rate,
+	.recalc_rate	= ccu_gate_recalc_rate,
 };

drivers/clk/sunxi-ng/ccu_mult.c

@@ -137,6 +137,8 @@ static int ccu_mult_set_rate(struct clk_hw *hw, unsigned long rate,
 
 	spin_unlock_irqrestore(cm->common.lock, flags);
 
+	ccu_helper_wait_for_lock(&cm->common, cm->lock);
+
 	return 0;
 }
 

drivers/clk/sunxi-ng/ccu_mult.h

@@ -33,6 +33,7 @@ struct ccu_mult_internal {
 
 struct ccu_mult {
 	u32			enable;
+	u32			lock;
 
 	struct ccu_frac_internal	frac;
 	struct ccu_mult_internal	mult;
@@ -45,6 +46,7 @@ struct ccu_mult {
 				   _flags)				\
 	struct ccu_mult _struct = {					\
 		.enable	= _gate,					\
+		.lock	= _lock,					\
 		.mult	= _SUNXI_CCU_MULT(_mshift, _mwidth),		\
 		.common	= {						\
 			.reg		= _reg,				\

include/dt-bindings/clock/sun8i-h3-ccu.h

@@ -91,7 +91,7 @@
 #define CLK_BUS_UART1		63
 #define CLK_BUS_UART2		64
 #define CLK_BUS_UART3		65
-#define CLK_BUS_SCR		66
+#define CLK_BUS_SCR0		66
 #define CLK_BUS_EPHY		67
 #define CLK_BUS_DBG		68
 
@@ -142,4 +142,7 @@
 
 #define CLK_GPU			114
 
+/* New clocks imported in H5 */
+#define CLK_BUS_SCR1		115
+
 #endif /* _DT_BINDINGS_CLK_SUN8I_H3_H_ */

include/dt-bindings/clock/sun8i-r-ccu.h

@@ -0,0 +1,59 @@
+/*
+ * Copyright (c) 2016 Icenowy Zheng <icenowy@aosc.xyz>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#ifndef _DT_BINDINGS_CLK_SUN8I_R_CCU_H_
+#define _DT_BINDINGS_CLK_SUN8I_R_CCU_H_
+
+#define CLK_AR100		0
+
+#define CLK_APB0_PIO		3
+#define CLK_APB0_IR		4
+#define CLK_APB0_TIMER		5
+#define CLK_APB0_RSB		6
+#define CLK_APB0_UART		7
+/* 8 is reserved for CLK_APB0_W1 on A31 */
+#define CLK_APB0_I2C		9
+#define CLK_APB0_TWD		10
+
+#define CLK_IR			11
+
+#endif /* _DT_BINDINGS_CLK_SUN8I_R_CCU_H_ */

include/dt-bindings/reset/sun8i-h3-ccu.h

@@ -98,6 +98,9 @@
 #define RST_BUS_UART1		50
 #define RST_BUS_UART2		51
 #define RST_BUS_UART3		52
-#define RST_BUS_SCR		53
+#define RST_BUS_SCR0		53
+
+/* New resets imported in H5 */
+#define RST_BUS_SCR1		54
 
 #endif /* _DT_BINDINGS_RST_SUN8I_H3_H_ */

include/dt-bindings/reset/sun8i-r-ccu.h

@@ -0,0 +1,53 @@
+/*
+ * Copyright (C) 2016 Icenowy Zheng <icenowy@aosc.xyz>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#ifndef _DT_BINDINGS_RST_SUN8I_R_CCU_H_
+#define _DT_BINDINGS_RST_SUN8I_R_CCU_H_
+
+#define RST_APB0_IR		0
+#define RST_APB0_TIMER		1
+#define RST_APB0_RSB		2
+#define RST_APB0_UART		3
+/* 4 is reserved for RST_APB0_W1 on A31 */
+#define RST_APB0_I2C		5
+
+#endif /* _DT_BINDINGS_RST_SUN8I_R_CCU_H_ */