Browse Source

i2c: xiic: Service all interrupts in isr

Currently only one interrupt is serviced in the isr.
In case the multiple interrupts happen simultenously we service and ack
only one of them. Check for all the causes in the isr and service them.

Signed-off-by: Shubhrajyoti Datta <shubhraj@xilinx.com>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
Shubhrajyoti Datta 10 năm trước cách đây
mục cha
commit
7f9906bd7f
1 tập tin đã thay đổi với 10 bổ sung14 xóa
  1. 10 14
      drivers/i2c/busses/i2c-xiic.c

+ 10 - 14
drivers/i2c/busses/i2c-xiic.c

@@ -401,11 +401,11 @@ static irqreturn_t xiic_process(int irq, void *dev_id)
 
 		if (i2c->tx_msg)
 			xiic_wakeup(i2c, STATE_ERROR);
-
-	} else if (pend & XIIC_INTR_RX_FULL_MASK) {
+	}
+	if (pend & XIIC_INTR_RX_FULL_MASK) {
 		/* Receive register/FIFO is full */
 
-		clr = XIIC_INTR_RX_FULL_MASK;
+		clr |= XIIC_INTR_RX_FULL_MASK;
 		if (!i2c->rx_msg) {
 			dev_dbg(i2c->adap.dev.parent,
 				"%s unexpexted RX IRQ\n", __func__);
@@ -438,9 +438,10 @@ static irqreturn_t xiic_process(int irq, void *dev_id)
 				__xiic_start_xfer(i2c);
 			}
 		}
-	} else if (pend & XIIC_INTR_BNB_MASK) {
+	}
+	if (pend & XIIC_INTR_BNB_MASK) {
 		/* IIC bus has transitioned to not busy */
-		clr = XIIC_INTR_BNB_MASK;
+		clr |= XIIC_INTR_BNB_MASK;
 
 		/* The bus is not busy, disable BusNotBusy interrupt */
 		xiic_irq_dis(i2c, XIIC_INTR_BNB_MASK);
@@ -453,12 +454,12 @@ static irqreturn_t xiic_process(int irq, void *dev_id)
 			xiic_wakeup(i2c, STATE_DONE);
 		else
 			xiic_wakeup(i2c, STATE_ERROR);
-
-	} else if (pend & (XIIC_INTR_TX_EMPTY_MASK | XIIC_INTR_TX_HALF_MASK)) {
+	}
+	if (pend & (XIIC_INTR_TX_EMPTY_MASK | XIIC_INTR_TX_HALF_MASK)) {
 		/* Transmit register/FIFO is empty or ½ empty */
 
-		clr = pend &
-			(XIIC_INTR_TX_EMPTY_MASK | XIIC_INTR_TX_HALF_MASK);
+		clr |= (pend &
+			(XIIC_INTR_TX_EMPTY_MASK | XIIC_INTR_TX_HALF_MASK));
 
 		if (!i2c->tx_msg) {
 			dev_dbg(i2c->adap.dev.parent,
@@ -489,11 +490,6 @@ static irqreturn_t xiic_process(int irq, void *dev_id)
 			 * make sure to disable tx half
 			 */
 			xiic_irq_dis(i2c, XIIC_INTR_TX_HALF_MASK);
-	} else {
-		/* got IRQ which is not acked */
-		dev_err(i2c->adap.dev.parent, "%s Got unexpected IRQ\n",
-			__func__);
-		clr = pend;
 	}
 out:
 	dev_dbg(i2c->adap.dev.parent, "%s clr: 0x%x\n", __func__, clr);