Merge tag 'v4.11-rc5' into x86/mm, to refresh the branch

Signed-off-by: Ingo Molnar <mingo@kernel.org>

Documentation/admin-guide/kernel-parameters.txt

@@ -1725,6 +1725,12 @@
 			kernel and module base offset ASLR (Address Space
 			Layout Randomization).
 
+	kasan_multi_shot
+			[KNL] Enforce KASAN (Kernel Address Sanitizer) to print
+			report on every invalid memory access. Without this
+			parameter KASAN will print report only for the first
+			invalid access.
+
 	keepinitrd	[HW,ARM]
 
 	kernelcore=	[KNL,X86,IA-64,PPC]

Documentation/devicetree/bindings/arm/marvell/cp110-system-controller0.txt

@@ -45,7 +45,7 @@ The following clocks are available:
    - 1 15	SATA
    - 1 16	SATA USB
    - 1 17	Main
-   - 1 18	SD/MMC
+   - 1 18	SD/MMC/GOP
    - 1 21	Slow IO (SPI, NOR, BootROM, I2C, UART)
    - 1 22	USB3H0
    - 1 23	USB3H1
@@ -65,7 +65,7 @@ Required properties:
 	"cpm-audio", "cpm-communit", "cpm-nand", "cpm-ppv2", "cpm-sdio",
 	"cpm-mg-domain", "cpm-mg-core", "cpm-xor1", "cpm-xor0", "cpm-gop-dp", "none",
 	"cpm-pcie_x10", "cpm-pcie_x11", "cpm-pcie_x4", "cpm-pcie-xor", "cpm-sata",
-	"cpm-sata-usb", "cpm-main", "cpm-sd-mmc", "none", "none", "cpm-slow-io",
+	"cpm-sata-usb", "cpm-main", "cpm-sd-mmc-gop", "none", "none", "cpm-slow-io",
 	"cpm-usb3h0", "cpm-usb3h1", "cpm-usb3dev", "cpm-eip150", "cpm-eip197";
 
 Example:
@@ -78,6 +78,6 @@ Example:
 		gate-clock-output-names = "cpm-audio", "cpm-communit", "cpm-nand", "cpm-ppv2", "cpm-sdio",
 			"cpm-mg-domain", "cpm-mg-core", "cpm-xor1", "cpm-xor0", "cpm-gop-dp", "none",
 			"cpm-pcie_x10", "cpm-pcie_x11", "cpm-pcie_x4", "cpm-pcie-xor", "cpm-sata",
-			"cpm-sata-usb", "cpm-main", "cpm-sd-mmc", "none", "none", "cpm-slow-io",
+			"cpm-sata-usb", "cpm-main", "cpm-sd-mmc-gop", "none", "none", "cpm-slow-io",
 			"cpm-usb3h0", "cpm-usb3h1", "cpm-usb3dev", "cpm-eip150", "cpm-eip197";
 	};

Documentation/devicetree/bindings/display/exynos/exynos_dsim.txt

@@ -4,7 +4,6 @@ Required properties:
   - compatible: value should be one of the following
 		"samsung,exynos3250-mipi-dsi" /* for Exynos3250/3472 SoCs */
 		"samsung,exynos4210-mipi-dsi" /* for Exynos4 SoCs */
-		"samsung,exynos4415-mipi-dsi" /* for Exynos4415 SoC */
 		"samsung,exynos5410-mipi-dsi" /* for Exynos5410/5420/5440 SoCs */
 		"samsung,exynos5422-mipi-dsi" /* for Exynos5422/5800 SoCs */
 		"samsung,exynos5433-mipi-dsi" /* for Exynos5433 SoCs */

Documentation/devicetree/bindings/display/exynos/samsung-fimd.txt

@@ -11,7 +11,6 @@ Required properties:
 		"samsung,s5pv210-fimd"; /* for S5PV210 SoC */
 		"samsung,exynos3250-fimd"; /* for Exynos3250/3472 SoCs */
 		"samsung,exynos4210-fimd"; /* for Exynos4 SoCs */
-		"samsung,exynos4415-fimd"; /* for Exynos4415 SoC */
 		"samsung,exynos5250-fimd"; /* for Exynos5250 SoCs */
 		"samsung,exynos5420-fimd"; /* for Exynos5420/5422/5800 SoCs */
 

Documentation/devicetree/bindings/mmc/rockchip-dw-mshc.txt

@@ -13,7 +13,7 @@ Required Properties:
 	- "rockchip,rk2928-dw-mshc": for Rockchip RK2928 and following,
 							before RK3288
 	- "rockchip,rk3288-dw-mshc": for Rockchip RK3288
-	- "rockchip,rk1108-dw-mshc", "rockchip,rk3288-dw-mshc": for Rockchip RK1108
+	- "rockchip,rv1108-dw-mshc", "rockchip,rk3288-dw-mshc": for Rockchip RV1108
 	- "rockchip,rk3036-dw-mshc", "rockchip,rk3288-dw-mshc": for Rockchip RK3036
 	- "rockchip,rk3368-dw-mshc", "rockchip,rk3288-dw-mshc": for Rockchip RK3368
 	- "rockchip,rk3399-dw-mshc", "rockchip,rk3288-dw-mshc": for Rockchip RK3399

Documentation/devicetree/bindings/phy/brcm,nsp-usb3-phy.txt

@@ -1,39 +0,0 @@
-Broadcom USB3 phy binding for northstar plus SoC
-The USB3 phy is internal to the SoC and is accessed using mdio interface.
-
-Required mdio bus properties:
-- reg: Should be 0x0 for SoC internal USB3 phy
-- #address-cells: must be 1
-- #size-cells: must be 0
-
-Required USB3 PHY properties:
-- compatible: should be "brcm,nsp-usb3-phy"
-- reg: USB3 Phy address on SoC internal MDIO bus and it should be 0x10.
-- usb3-ctrl-syscon: handler of syscon node defining physical address
-  of usb3 control register.
-- #phy-cells: must be 0
-
-Required usb3 control properties:
-- compatible: should be "brcm,nsp-usb3-ctrl"
-- reg: offset and length of the control registers
-
-Example:
-
-	mdio@0 {
-		reg = <0x0>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		usb3_phy: usb-phy@10 {
-			compatible = "brcm,nsp-usb3-phy";
-			reg = <0x10>;
-			usb3-ctrl-syscon = <&usb3_ctrl>;
-			#phy-cells = <0>;
-			status = "disabled";
-		};
-	};
-
-	usb3_ctrl: syscon@104408 {
-		compatible = "brcm,nsp-usb3-ctrl", "syscon";
-		reg = <0x104408 0x3fc>;
-	};

Documentation/devicetree/bindings/rng/omap_rng.txt

@@ -12,7 +12,8 @@ Required properties:
 - reg : Offset and length of the register set for the module
 - interrupts : the interrupt number for the RNG module.
 		Used for "ti,omap4-rng" and "inside-secure,safexcel-eip76"
-- clocks: the trng clock source
+- clocks: the trng clock source. Only mandatory for the
+  "inside-secure,safexcel-eip76" compatible.
 
 Example:
 /* AM335x */

Documentation/extcon/intel-int3496.txt

@@ -20,3 +20,8 @@ Index 1: The output gpio for enabling Vbus output from the device to the otg
 Index 2: The output gpio for muxing of the data pins between the USB host and
          the USB peripheral controller, write 1 to mux to the peripheral
          controller
+
+There is a mapping between indices and GPIO connection IDs as follows
+	id	index 0
+	vbus	index 1
+	mux	index 2

Documentation/gcc-plugins.txt

@@ -18,8 +18,8 @@ because gcc versions 4.5 and 4.6 are compiled by a C compiler,
 gcc-4.7 can be compiled by a C or a C++ compiler,
 and versions 4.8+ can only be compiled by a C++ compiler.
 
-Currently the GCC plugin infrastructure supports only the x86, arm and arm64
-architectures.
+Currently the GCC plugin infrastructure supports only the x86, arm, arm64 and
+powerpc architectures.
 
 This infrastructure was ported from grsecurity [6] and PaX [7].
 

Documentation/virtual/kvm/api.txt

@@ -3377,6 +3377,69 @@ struct kvm_ppc_resize_hpt {
 	__u32 pad;
 };
 
+4.104 KVM_X86_GET_MCE_CAP_SUPPORTED
+
+Capability: KVM_CAP_MCE
+Architectures: x86
+Type: system ioctl
+Parameters: u64 mce_cap (out)
+Returns: 0 on success, -1 on error
+
+Returns supported MCE capabilities. The u64 mce_cap parameter
+has the same format as the MSR_IA32_MCG_CAP register. Supported
+capabilities will have the corresponding bits set.
+
+4.105 KVM_X86_SETUP_MCE
+
+Capability: KVM_CAP_MCE
+Architectures: x86
+Type: vcpu ioctl
+Parameters: u64 mcg_cap (in)
+Returns: 0 on success,
+         -EFAULT if u64 mcg_cap cannot be read,
+         -EINVAL if the requested number of banks is invalid,
+         -EINVAL if requested MCE capability is not supported.
+
+Initializes MCE support for use. The u64 mcg_cap parameter
+has the same format as the MSR_IA32_MCG_CAP register and
+specifies which capabilities should be enabled. The maximum
+supported number of error-reporting banks can be retrieved when
+checking for KVM_CAP_MCE. The supported capabilities can be
+retrieved with KVM_X86_GET_MCE_CAP_SUPPORTED.
+
+4.106 KVM_X86_SET_MCE
+
+Capability: KVM_CAP_MCE
+Architectures: x86
+Type: vcpu ioctl
+Parameters: struct kvm_x86_mce (in)
+Returns: 0 on success,
+         -EFAULT if struct kvm_x86_mce cannot be read,
+         -EINVAL if the bank number is invalid,
+         -EINVAL if VAL bit is not set in status field.
+
+Inject a machine check error (MCE) into the guest. The input
+parameter is:
+
+struct kvm_x86_mce {
+	__u64 status;
+	__u64 addr;
+	__u64 misc;
+	__u64 mcg_status;
+	__u8 bank;
+	__u8 pad1[7];
+	__u64 pad2[3];
+};
+
+If the MCE being reported is an uncorrected error, KVM will
+inject it as an MCE exception into the guest. If the guest
+MCG_STATUS register reports that an MCE is in progress, KVM
+causes an KVM_EXIT_SHUTDOWN vmexit.
+
+Otherwise, if the MCE is a corrected error, KVM will just
+store it in the corresponding bank (provided this bank is
+not holding a previously reported uncorrected error).
+
 5. The kvm_run structure
 ------------------------
 

MAINTAINERS

@@ -3216,7 +3216,6 @@ F:	drivers/platform/chrome/
 
 CISCO VIC ETHERNET NIC DRIVER
 M:	Christian Benvenuti <benve@cisco.com>
-M:	Sujith Sankar <ssujith@cisco.com>
 M:	Govindarajulu Varadarajan <_govind@gmx.com>
 M:	Neel Patel <neepatel@cisco.com>
 S:	Supported
@@ -4776,6 +4775,12 @@ L:	linux-edac@vger.kernel.org
 S:	Maintained
 F:	drivers/edac/mpc85xx_edac.[ch]
 
+EDAC-PND2
+M:	Tony Luck <tony.luck@intel.com>
+L:	linux-edac@vger.kernel.org
+S:	Maintained
+F:	drivers/edac/pnd2_edac.[ch]
+
 EDAC-PASEMI
 M:	Egor Martovetsky <egor@pasemi.com>
 L:	linux-edac@vger.kernel.org
@@ -7774,13 +7779,6 @@ F:	include/net/mac80211.h
 F:	net/mac80211/
 F:	drivers/net/wireless/mac80211_hwsim.[ch]
 
-MACVLAN DRIVER
-M:	Patrick McHardy <kaber@trash.net>
-L:	netdev@vger.kernel.org
-S:	Maintained
-F:	drivers/net/macvlan.c
-F:	include/linux/if_macvlan.h
-
 MAILBOX API
 M:	Jassi Brar <jassisinghbrar@gmail.com>
 L:	linux-kernel@vger.kernel.org
@@ -7853,6 +7851,8 @@ F:	drivers/net/ethernet/marvell/mvneta.*
 MARVELL MWIFIEX WIRELESS DRIVER
 M:	Amitkumar Karwar <akarwar@marvell.com>
 M:	Nishant Sarmukadam <nishants@marvell.com>
+M:	Ganapathi Bhat <gbhat@marvell.com>
+M:	Xinming Hu <huxm@marvell.com>
 L:	linux-wireless@vger.kernel.org
 S:	Maintained
 F:	drivers/net/wireless/marvell/mwifiex/
@@ -13383,14 +13383,6 @@ W:	https://linuxtv.org
 S:	Maintained
 F:	drivers/media/platform/vivid/*
 
-VLAN (802.1Q)
-M:	Patrick McHardy <kaber@trash.net>
-L:	netdev@vger.kernel.org
-S:	Maintained
-F:	drivers/net/macvlan.c
-F:	include/linux/if_*vlan.h
-F:	net/8021q/
-
 VLYNQ BUS
 M:	Florian Fainelli <f.fainelli@gmail.com>
 L:	openwrt-devel@lists.openwrt.org (subscribers-only)

Makefile

@@ -1,7 +1,7 @@
 VERSION = 4
 PATCHLEVEL = 11
 SUBLEVEL = 0
-EXTRAVERSION = -rc2
+EXTRAVERSION = -rc5
 NAME = Fearless Coyote
 
 # *DOCUMENTATION*

arch/arc/boot/dts/skeleton.dtsi

@@ -26,6 +26,7 @@
 			device_type = "cpu";
 			compatible = "snps,arc770d";
 			reg = <0>;
+			clocks = <&core_clk>;
 		};
 	};
 

arch/arc/boot/dts/skeleton_hs.dtsi

@@ -21,6 +21,7 @@
 			device_type = "cpu";
 			compatible = "snps,archs38";
 			reg = <0>;
+			clocks = <&core_clk>;
 		};
 	};
 

arch/arc/boot/dts/skeleton_hs_idu.dtsi

@@ -19,8 +19,27 @@
 
 		cpu@0 {
 			device_type = "cpu";
-			compatible = "snps,archs38xN";
+			compatible = "snps,archs38";
 			reg = <0>;
+			clocks = <&core_clk>;
+		};
+		cpu@1 {
+			device_type = "cpu";
+			compatible = "snps,archs38";
+			reg = <1>;
+			clocks = <&core_clk>;
+		};
+		cpu@2 {
+			device_type = "cpu";
+			compatible = "snps,archs38";
+			reg = <2>;
+			clocks = <&core_clk>;
+		};
+		cpu@3 {
+			device_type = "cpu";
+			compatible = "snps,archs38";
+			reg = <3>;
+			clocks = <&core_clk>;
 		};
 	};
 

arch/arc/boot/dts/vdk_axs10x_mb.dtsi

@@ -112,13 +112,19 @@
 			interrupts = <7>;
 			bus-width = <4>;
 		};
+	};
 
-		/* Embedded Vision subsystem UIO mappings; only relevant for EV VDK */
-		uio_ev: uio@0xD0000000 {
-			compatible = "generic-uio";
-			reg = <0xD0000000 0x2000 0xD1000000 0x2000 0x90000000 0x10000000 0xC0000000 0x10000000>;
-			reg-names = "ev_gsa", "ev_ctrl", "ev_shared_mem", "ev_code_mem";
-			interrupts = <23>;
-		};
+	/*
+	 * Embedded Vision subsystem UIO mappings; only relevant for EV VDK
+	 *
+	 * This node is intentionally put outside of MB above becase
+	 * it maps areas outside of MB's 0xEz-0xFz.
+	 */
+	uio_ev: uio@0xD0000000 {
+		compatible = "generic-uio";
+		reg = <0xD0000000 0x2000 0xD1000000 0x2000 0x90000000 0x10000000 0xC0000000 0x10000000>;
+		reg-names = "ev_gsa", "ev_ctrl", "ev_shared_mem", "ev_code_mem";
+		interrupt-parent = <&mb_intc>;
+		interrupts = <23>;
 	};
 };

arch/arc/include/asm/kprobes.h

@@ -54,9 +54,7 @@ int kprobe_fault_handler(struct pt_regs *regs, unsigned long cause);
 void kretprobe_trampoline(void);
 void trap_is_kprobe(unsigned long address, struct pt_regs *regs);
 #else
-static void trap_is_kprobe(unsigned long address, struct pt_regs *regs)
-{
-}
+#define trap_is_kprobe(address, regs)
 #endif /* CONFIG_KPROBES */
 
 #endif /* _ARC_KPROBES_H */

arch/arc/kernel/entry-arcv2.S

@@ -100,15 +100,21 @@ END(handle_interrupt)
 ;################### Non TLB Exception Handling #############################
 
 ENTRY(EV_SWI)
-	flag 1
+	; TODO: implement this
+	EXCEPTION_PROLOGUE
+	b   ret_from_exception
 END(EV_SWI)
 
 ENTRY(EV_DivZero)
-	flag 1
+	; TODO: implement this
+	EXCEPTION_PROLOGUE
+	b   ret_from_exception
 END(EV_DivZero)
 
 ENTRY(EV_DCError)
-	flag 1
+	; TODO: implement this
+	EXCEPTION_PROLOGUE
+	b   ret_from_exception
 END(EV_DCError)
 
 ; ---------------------------------------------

arch/arc/kernel/setup.c

@@ -10,6 +10,7 @@
 #include <linux/fs.h>
 #include <linux/delay.h>
 #include <linux/root_dev.h>
+#include <linux/clk.h>
 #include <linux/clk-provider.h>
 #include <linux/clocksource.h>
 #include <linux/console.h>
@@ -488,8 +489,9 @@ static int show_cpuinfo(struct seq_file *m, void *v)
 {
 	char *str;
 	int cpu_id = ptr_to_cpu(v);
-	struct device_node *core_clk = of_find_node_by_name(NULL, "core_clk");
-	u32 freq = 0;
+	struct device *cpu_dev = get_cpu_device(cpu_id);
+	struct clk *cpu_clk;
+	unsigned long freq = 0;
 
 	if (!cpu_online(cpu_id)) {
 		seq_printf(m, "processor [%d]\t: Offline\n", cpu_id);
@@ -502,9 +504,15 @@ static int show_cpuinfo(struct seq_file *m, void *v)
 
 	seq_printf(m, arc_cpu_mumbojumbo(cpu_id, str, PAGE_SIZE));
 
-	of_property_read_u32(core_clk, "clock-frequency", &freq);
+	cpu_clk = clk_get(cpu_dev, NULL);
+	if (IS_ERR(cpu_clk)) {
+		seq_printf(m, "CPU speed \t: Cannot get clock for processor [%d]\n",
+			   cpu_id);
+	} else {
+		freq = clk_get_rate(cpu_clk);
+	}
 	if (freq)
-		seq_printf(m, "CPU speed\t: %u.%02u Mhz\n",
+		seq_printf(m, "CPU speed\t: %lu.%02lu Mhz\n",
 			   freq / 1000000, (freq / 10000) % 100);
 
 	seq_printf(m, "Bogo MIPS\t: %lu.%02lu\n",

arch/arc/mm/cache.c

@@ -633,6 +633,9 @@ noinline static void slc_entire_op(const int op)
 
 	write_aux_reg(ARC_REG_SLC_INVALIDATE, 1);
 
+	/* Make sure "busy" bit reports correct stataus, see STAR 9001165532 */
+	read_aux_reg(r);
+
 	/* Important to wait for flush to complete */
 	while (read_aux_reg(r) & SLC_CTRL_BUSY);
 }

arch/arm/boot/dts/am335x-pcm-953.dtsi

@@ -63,14 +63,14 @@
 			label = "home";
 			linux,code = <KEY_HOME>;
 			gpios = <&gpio3 7 GPIO_ACTIVE_HIGH>;
-			gpio-key,wakeup;
+			wakeup-source;
 		};
 
 		button@1 {
 			label = "menu";
 			linux,code = <KEY_MENU>;
 			gpios = <&gpio3 8 GPIO_ACTIVE_HIGH>;
-			gpio-key,wakeup;
+			wakeup-source;
 		};
 
 	};

arch/arm/boot/dts/am57xx-idk-common.dtsi

@@ -315,6 +315,13 @@
 			/* ID & VBUS GPIOs provided in board dts */
 		};
 	};
+
+	tpic2810: tpic2810@60 {
+		compatible = "ti,tpic2810";
+		reg = <0x60>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
 };
 
 &mcspi3 {
@@ -330,13 +337,6 @@
 		spi-max-frequency = <1000000>;
 		spi-cpol;
 	};
-
-	tpic2810: tpic2810@60 {
-		compatible = "ti,tpic2810";
-		reg = <0x60>;
-		gpio-controller;
-		#gpio-cells = <2>;
-	};
 };
 
 &uart3 {

arch/arm/boot/dts/bcm5301x.dtsi

@@ -66,14 +66,14 @@
 		timer@20200 {
 			compatible = "arm,cortex-a9-global-timer";
 			reg = <0x20200 0x100>;
-			interrupts = <GIC_PPI 11 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_PPI 11 IRQ_TYPE_EDGE_RISING>;
 			clocks = <&periph_clk>;
 		};
 
 		local-timer@20600 {
 			compatible = "arm,cortex-a9-twd-timer";
 			reg = <0x20600 0x100>;
-			interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_PPI 13 IRQ_TYPE_EDGE_RISING>;
 			clocks = <&periph_clk>;
 		};
 

arch/arm/boot/dts/bcm953012k.dts

@@ -48,15 +48,14 @@
 	};
 
 	memory {
-		reg = <0x00000000 0x10000000>;
+		reg = <0x80000000 0x10000000>;
 	};
 };
 
 &uart0 {
-	clock-frequency = <62499840>;
+	status = "okay";
 };
 
 &uart1 {
-	clock-frequency = <62499840>;
 	status = "okay";
 };

arch/arm/boot/dts/bcm958522er.dts

@@ -55,6 +55,7 @@
 	gpio-restart {
 		compatible = "gpio-restart";
 		gpios = <&gpioa 15 GPIO_ACTIVE_LOW>;
+		open-source;
 		priority = <200>;
 	};
 };

arch/arm/boot/dts/bcm958525er.dts

@@ -55,6 +55,7 @@
 	gpio-restart {
 		compatible = "gpio-restart";
 		gpios = <&gpioa 15 GPIO_ACTIVE_LOW>;
+		open-source;
 		priority = <200>;
 	};
 };

arch/arm/boot/dts/bcm958525xmc.dts

@@ -55,6 +55,7 @@
 	gpio-restart {
 		compatible = "gpio-restart";
 		gpios = <&gpioa 31 GPIO_ACTIVE_LOW>;
+		open-source;
 		priority = <200>;
 	};
 };

arch/arm/boot/dts/bcm958622hr.dts

@@ -55,6 +55,7 @@
 	gpio-restart {
 		compatible = "gpio-restart";
 		gpios = <&gpioa 15 GPIO_ACTIVE_LOW>;
+		open-source;
 		priority = <200>;
 	};
 };

arch/arm/boot/dts/bcm958623hr.dts

@@ -55,6 +55,7 @@
 	gpio-restart {
 		compatible = "gpio-restart";
 		gpios = <&gpioa 15 GPIO_ACTIVE_LOW>;
+		open-source;
 		priority = <200>;
 	};
 };

arch/arm/boot/dts/bcm958625hr.dts

@@ -55,6 +55,7 @@
 	gpio-restart {
 		compatible = "gpio-restart";
 		gpios = <&gpioa 15 GPIO_ACTIVE_LOW>;
+		open-source;
 		priority = <200>;
 	};
 };

arch/arm/boot/dts/bcm988312hr.dts

@@ -55,6 +55,7 @@
 	gpio-restart {
 		compatible = "gpio-restart";
 		gpios = <&gpioa 15 GPIO_ACTIVE_LOW>;
+		open-source;
 		priority = <200>;
 	};
 };

arch/arm/boot/dts/imx6sx-udoo-neo.dtsi

@@ -121,11 +121,6 @@
 	};
 };
 
-&cpu0 {
-	arm-supply = <&sw1a_reg>;
-	soc-supply = <&sw1c_reg>;
-};
-
 &fec1 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_enet1>;

arch/arm/boot/dts/sama5d2.dtsi

@@ -266,7 +266,7 @@
 		};
 
 		usb1: ohci@00400000 {
-			compatible = "atmel,sama5d2-ohci", "usb-ohci";
+			compatible = "atmel,at91rm9200-ohci", "usb-ohci";
 			reg = <0x00400000 0x100000>;
 			interrupts = <41 IRQ_TYPE_LEVEL_HIGH 2>;
 			clocks = <&uhphs_clk>, <&uhphs_clk>, <&uhpck>;

arch/arm/boot/dts/ste-dbx5x0.dtsi

@@ -14,6 +14,7 @@
 #include <dt-bindings/mfd/dbx500-prcmu.h>
 #include <dt-bindings/arm/ux500_pm_domains.h>
 #include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/clock/ste-ab8500.h>
 #include "skeleton.dtsi"
 
 / {
@@ -603,6 +604,11 @@
 				interrupt-controller;
 				#interrupt-cells = <2>;
 
+				ab8500_clock: clock-controller {
+					compatible = "stericsson,ab8500-clk";
+					#clock-cells = <1>;
+				};
+
 				ab8500_gpio: ab8500-gpio {
 					compatible = "stericsson,ab8500-gpio";
 					gpio-controller;
@@ -686,6 +692,8 @@
 
 				ab8500-pwm {
 					compatible = "stericsson,ab8500-pwm";
+					clocks = <&ab8500_clock AB8500_SYSCLK_INT>;
+					clock-names = "intclk";
 				};
 
 				ab8500-debugfs {
@@ -700,6 +708,9 @@
 					V-AMIC2-supply = <&ab8500_ldo_anamic2_reg>;
 					V-DMIC-supply = <&ab8500_ldo_dmic_reg>;
 
+					clocks = <&ab8500_clock AB8500_SYSCLK_AUDIO>;
+					clock-names = "audioclk";
+
 					stericsson,earpeice-cmv = <950>; /* Units in mV. */
 				};
 
@@ -1095,6 +1106,14 @@
 			status = "disabled";
 		};
 
+		sound {
+			compatible = "stericsson,snd-soc-mop500";
+			stericsson,cpu-dai = <&msp1 &msp3>;
+			stericsson,audio-codec = <&codec>;
+			clocks = <&prcmu_clk PRCMU_SYSCLK>, <&ab8500_clock AB8500_SYSCLK_ULP>, <&ab8500_clock AB8500_SYSCLK_INT>;
+			clock-names = "sysclk", "ulpclk", "intclk";
+		};
+
 		msp0: msp@80123000 {
 			compatible = "stericsson,ux500-msp-i2s";
 			reg = <0x80123000 0x1000>;

arch/arm/boot/dts/ste-href.dtsi

@@ -186,15 +186,6 @@
 			status = "okay";
 		};
 
-		sound {
-			compatible = "stericsson,snd-soc-mop500";
-
-			stericsson,cpu-dai = <&msp1 &msp3>;
-			stericsson,audio-codec = <&codec>;
-			clocks = <&prcmu_clk PRCMU_SYSCLK>;
-			clock-names = "sysclk";
-		};
-
 		msp0: msp@80123000 {
 			pinctrl-names = "default";
 			pinctrl-0 = <&msp0_default_mode>;

arch/arm/boot/dts/ste-snowball.dts

@@ -159,15 +159,6 @@
 				     "", "", "", "", "", "", "", "";
 		};
 
-		sound {
-			compatible = "stericsson,snd-soc-mop500";
-
-			stericsson,cpu-dai = <&msp1 &msp3>;
-			stericsson,audio-codec = <&codec>;
-			clocks = <&prcmu_clk PRCMU_SYSCLK>;
-			clock-names = "sysclk";
-		};
-
 		msp0: msp@80123000 {
 			pinctrl-names = "default";
 			pinctrl-0 = <&msp0_default_mode>;

arch/arm/boot/dts/sun7i-a20-lamobo-r1.dts

@@ -167,7 +167,7 @@
 					reg = <8>;
 					label = "cpu";
 					ethernet = <&gmac>;
-					phy-mode = "rgmii";
+					phy-mode = "rgmii-txid";
 					fixed-link {
 						speed = <1000>;
 						full-duplex;

arch/arm/boot/dts/sun8i-a23-a33.dtsi

@@ -495,7 +495,7 @@
 			resets = <&ccu RST_BUS_GPU>;
 
 			assigned-clocks = <&ccu CLK_GPU>;
-			assigned-clock-rates = <408000000>;
+			assigned-clock-rates = <384000000>;
 		};
 
 		gic: interrupt-controller@01c81000 {

arch/arm/boot/dts/sun8i-a33.dtsi

@@ -113,8 +113,8 @@
 		simple-audio-card,mclk-fs = <512>;
 		simple-audio-card,aux-devs = <&codec_analog>;
 		simple-audio-card,routing =
-			"Left DAC", "Digital Left DAC",
-			"Right DAC", "Digital Right DAC";
+			"Left DAC", "AIF1 Slot 0 Left",
+			"Right DAC", "AIF1 Slot 0 Right";
 		status = "disabled";
 
 		simple-audio-card,cpu {

arch/arm/boot/dts/sun8i-reference-design-tablet.dtsi

@@ -50,8 +50,6 @@
 
 	backlight: backlight {
 		compatible = "pwm-backlight";
-		pinctrl-names = "default";
-		pinctrl-0 = <&bl_en_pin>;
 		pwms = <&pwm 0 50000 PWM_POLARITY_INVERTED>;
 		brightness-levels = <0 10 20 30 40 50 60 70 80 90 100>;
 		default-brightness-level = <8>;
@@ -93,11 +91,6 @@
 };
 
 &pio {
-	bl_en_pin: bl_en_pin@0 {
-		pins = "PH6";
-		function = "gpio_in";
-	};
-
 	mmc0_cd_pin: mmc0_cd_pin@0 {
 		pins = "PB4";
 		function = "gpio_in";

arch/arm/configs/omap2plus_defconfig

@@ -188,6 +188,7 @@ CONFIG_WL12XX=m
 CONFIG_WL18XX=m
 CONFIG_WLCORE_SPI=m
 CONFIG_WLCORE_SDIO=m
+CONFIG_INPUT_MOUSEDEV=m
 CONFIG_INPUT_JOYDEV=m
 CONFIG_INPUT_EVDEV=m
 CONFIG_KEYBOARD_ATKBD=m

arch/arm/mach-at91/pm.c

@@ -289,6 +289,22 @@ static void at91_ddr_standby(void)
 		at91_ramc_write(1, AT91_DDRSDRC_LPR, saved_lpr1);
 }
 
+static void sama5d3_ddr_standby(void)
+{
+	u32 lpr0;
+	u32 saved_lpr0;
+
+	saved_lpr0 = at91_ramc_read(0, AT91_DDRSDRC_LPR);
+	lpr0 = saved_lpr0 & ~AT91_DDRSDRC_LPCB;
+	lpr0 |= AT91_DDRSDRC_LPCB_POWER_DOWN;
+
+	at91_ramc_write(0, AT91_DDRSDRC_LPR, lpr0);
+
+	cpu_do_idle();
+
+	at91_ramc_write(0, AT91_DDRSDRC_LPR, saved_lpr0);
+}
+
 /* We manage both DDRAM/SDRAM controllers, we need more than one value to
  * remember.
  */
@@ -323,7 +339,7 @@ static const struct of_device_id const ramc_ids[] __initconst = {
 	{ .compatible = "atmel,at91rm9200-sdramc", .data = at91rm9200_standby },
 	{ .compatible = "atmel,at91sam9260-sdramc", .data = at91sam9_sdram_standby },
 	{ .compatible = "atmel,at91sam9g45-ddramc", .data = at91_ddr_standby },
-	{ .compatible = "atmel,sama5d3-ddramc", .data = at91_ddr_standby },
+	{ .compatible = "atmel,sama5d3-ddramc", .data = sama5d3_ddr_standby },
 	{ /*sentinel*/ }
 };
 

arch/arm/mach-omap2/Makefile

@@ -241,6 +241,3 @@ obj-$(CONFIG_MACH_OMAP2_TUSB6010)	+= usb-tusb6010.o
 
 onenand-$(CONFIG_MTD_ONENAND_OMAP2)	:= gpmc-onenand.o
 obj-y					+= $(onenand-m) $(onenand-y)
-
-nand-$(CONFIG_MTD_NAND_OMAP2)		:= gpmc-nand.o
-obj-y					+= $(nand-m) $(nand-y)

arch/arm/mach-omap2/gpmc-nand.c

@@ -1,154 +0,0 @@
-/*
- * gpmc-nand.c
- *
- * Copyright (C) 2009 Texas Instruments
- * Vimal Singh <vimalsingh@ti.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/kernel.h>
-#include <linux/platform_device.h>
-#include <linux/io.h>
-#include <linux/omap-gpmc.h>
-#include <linux/mtd/nand.h>
-#include <linux/platform_data/mtd-nand-omap2.h>
-
-#include <asm/mach/flash.h>
-
-#include "soc.h"
-
-/* minimum size for IO mapping */
-#define	NAND_IO_SIZE	4
-
-static bool gpmc_hwecc_bch_capable(enum omap_ecc ecc_opt)
-{
-	/* platforms which support all ECC schemes */
-	if (soc_is_am33xx() || soc_is_am43xx() || cpu_is_omap44xx() ||
-		 soc_is_omap54xx() || soc_is_dra7xx())
-		return 1;
-
-	if (ecc_opt == OMAP_ECC_BCH4_CODE_HW_DETECTION_SW ||
-		 ecc_opt == OMAP_ECC_BCH8_CODE_HW_DETECTION_SW) {
-		if (cpu_is_omap24xx())
-			return 0;
-		else if (cpu_is_omap3630() && (GET_OMAP_REVISION() == 0))
-			return 0;
-		else
-			return 1;
-	}
-
-	/* OMAP3xxx do not have ELM engine, so cannot support ECC schemes
-	 * which require H/W based ECC error detection */
-	if ((cpu_is_omap34xx() || cpu_is_omap3630()) &&
-	    ((ecc_opt == OMAP_ECC_BCH4_CODE_HW) ||
-		 (ecc_opt == OMAP_ECC_BCH8_CODE_HW)))
-		return 0;
-
-	/* legacy platforms support only HAM1 (1-bit Hamming) ECC scheme */
-	if (ecc_opt == OMAP_ECC_HAM1_CODE_HW ||
-	    ecc_opt == OMAP_ECC_HAM1_CODE_SW)
-		return 1;
-	else
-		return 0;
-}
-
-/* This function will go away once the device-tree convertion is complete */
-static void gpmc_set_legacy(struct omap_nand_platform_data *gpmc_nand_data,
-			    struct gpmc_settings *s)
-{
-	/* Enable RD PIN Monitoring Reg */
-	if (gpmc_nand_data->dev_ready) {
-		s->wait_on_read = true;
-		s->wait_on_write = true;
-	}
-
-	if (gpmc_nand_data->devsize == NAND_BUSWIDTH_16)
-		s->device_width = GPMC_DEVWIDTH_16BIT;
-	else
-		s->device_width = GPMC_DEVWIDTH_8BIT;
-}
-
-int gpmc_nand_init(struct omap_nand_platform_data *gpmc_nand_data,
-		   struct gpmc_timings *gpmc_t)
-{
-	int err	= 0;
-	struct gpmc_settings s;
-	struct platform_device *pdev;
-	struct resource gpmc_nand_res[] = {
-		{ .flags = IORESOURCE_MEM, },
-		{ .flags = IORESOURCE_IRQ, },
-		{ .flags = IORESOURCE_IRQ, },
-	};
-
-	BUG_ON(gpmc_nand_data->cs >= GPMC_CS_NUM);
-
-	err = gpmc_cs_request(gpmc_nand_data->cs, NAND_IO_SIZE,
-			      (unsigned long *)&gpmc_nand_res[0].start);
-	if (err < 0) {
-		pr_err("omap2-gpmc: Cannot request GPMC CS %d, error %d\n",
-		       gpmc_nand_data->cs, err);
-		return err;
-	}
-	gpmc_nand_res[0].end = gpmc_nand_res[0].start + NAND_IO_SIZE - 1;
-	gpmc_nand_res[1].start = gpmc_get_client_irq(GPMC_IRQ_FIFOEVENTENABLE);
-	gpmc_nand_res[2].start = gpmc_get_client_irq(GPMC_IRQ_COUNT_EVENT);
-
-	memset(&s, 0, sizeof(struct gpmc_settings));
-	gpmc_set_legacy(gpmc_nand_data, &s);
-
-	s.device_nand = true;
-
-	if (gpmc_t) {
-		err = gpmc_cs_set_timings(gpmc_nand_data->cs, gpmc_t, &s);
-		if (err < 0) {
-			pr_err("omap2-gpmc: Unable to set gpmc timings: %d\n",
-			       err);
-			return err;
-		}
-	}
-
-	err = gpmc_cs_program_settings(gpmc_nand_data->cs, &s);
-	if (err < 0)
-		goto out_free_cs;
-
-	err = gpmc_configure(GPMC_CONFIG_WP, 0);
-	if (err < 0)
-		goto out_free_cs;
-
-	if (!gpmc_hwecc_bch_capable(gpmc_nand_data->ecc_opt)) {
-		pr_err("omap2-nand: Unsupported NAND ECC scheme selected\n");
-		err = -EINVAL;
-		goto out_free_cs;
-	}
-
-
-	pdev = platform_device_alloc("omap2-nand", gpmc_nand_data->cs);
-	if (pdev) {
-		err = platform_device_add_resources(pdev, gpmc_nand_res,
-						    ARRAY_SIZE(gpmc_nand_res));
-		if (!err)
-			pdev->dev.platform_data = gpmc_nand_data;
-	} else {
-		err = -ENOMEM;
-	}
-	if (err)
-		goto out_free_pdev;
-
-	err = platform_device_add(pdev);
-	if (err) {
-		dev_err(&pdev->dev, "Unable to register NAND device\n");
-		goto out_free_pdev;
-	}
-
-	return 0;
-
-out_free_pdev:
-	platform_device_put(pdev);
-out_free_cs:
-	gpmc_cs_free(gpmc_nand_data->cs);
-
-	return err;
-}

arch/arm/mach-omap2/gpmc-onenand.c

@@ -367,7 +367,7 @@ static int gpmc_onenand_setup(void __iomem *onenand_base, int *freq_ptr)
 	return ret;
 }
 
-void gpmc_onenand_init(struct omap_onenand_platform_data *_onenand_data)
+int gpmc_onenand_init(struct omap_onenand_platform_data *_onenand_data)
 {
 	int err;
 	struct device *dev = &gpmc_onenand_device.dev;
@@ -393,15 +393,17 @@ void gpmc_onenand_init(struct omap_onenand_platform_data *_onenand_data)
 	if (err < 0) {
 		dev_err(dev, "Cannot request GPMC CS %d, error %d\n",
 			gpmc_onenand_data->cs, err);
-		return;
+		return err;
 	}
 
 	gpmc_onenand_resource.end = gpmc_onenand_resource.start +
 							ONENAND_IO_SIZE - 1;
 
-	if (platform_device_register(&gpmc_onenand_device) < 0) {
+	err = platform_device_register(&gpmc_onenand_device);
+	if (err) {
 		dev_err(dev, "Unable to register OneNAND device\n");
 		gpmc_cs_free(gpmc_onenand_data->cs);
-		return;
 	}
+
+	return err;
 }

arch/arm/mach-omap2/omap-headsmp.S

@@ -17,6 +17,7 @@
 
 #include <linux/linkage.h>
 #include <linux/init.h>
+#include <asm/assembler.h>
 
 #include "omap44xx.h"
 
@@ -66,7 +67,7 @@ wait_2:	ldr	r2, =AUX_CORE_BOOT0_PA	@ read from AuxCoreBoot0
 	cmp	r0, r4
 	bne	wait_2
 	ldr	r12, =API_HYP_ENTRY
-	adr	r0, hyp_boot
+	badr	r0, hyp_boot
 	smc	#0
 hyp_boot:
 	b	omap_secondary_startup

arch/arm/mach-omap2/omap_hwmod_3xxx_data.c

@@ -2112,11 +2112,20 @@ static struct omap_hwmod_ocp_if omap3_l4_core__i2c3 = {
 };
 
 /* L4 CORE -> SR1 interface */
+static struct omap_hwmod_addr_space omap3_sr1_addr_space[] = {
+	{
+		.pa_start	= OMAP34XX_SR1_BASE,
+		.pa_end		= OMAP34XX_SR1_BASE + SZ_1K - 1,
+		.flags		= ADDR_TYPE_RT,
+	},
+	{ },
+};
 
 static struct omap_hwmod_ocp_if omap34xx_l4_core__sr1 = {
 	.master		= &omap3xxx_l4_core_hwmod,
 	.slave		= &omap34xx_sr1_hwmod,
 	.clk		= "sr_l4_ick",
+	.addr		= omap3_sr1_addr_space,
 	.user		= OCP_USER_MPU,
 };
 
@@ -2124,15 +2133,25 @@ static struct omap_hwmod_ocp_if omap36xx_l4_core__sr1 = {
 	.master		= &omap3xxx_l4_core_hwmod,
 	.slave		= &omap36xx_sr1_hwmod,
 	.clk		= "sr_l4_ick",
+	.addr		= omap3_sr1_addr_space,
 	.user		= OCP_USER_MPU,
 };
 
 /* L4 CORE -> SR1 interface */
+static struct omap_hwmod_addr_space omap3_sr2_addr_space[] = {
+	{
+		.pa_start	= OMAP34XX_SR2_BASE,
+		.pa_end		= OMAP34XX_SR2_BASE + SZ_1K - 1,
+		.flags		= ADDR_TYPE_RT,
+	},
+	{ },
+};
 
 static struct omap_hwmod_ocp_if omap34xx_l4_core__sr2 = {
 	.master		= &omap3xxx_l4_core_hwmod,
 	.slave		= &omap34xx_sr2_hwmod,
 	.clk		= "sr_l4_ick",
+	.addr		= omap3_sr2_addr_space,
 	.user		= OCP_USER_MPU,
 };
 
@@ -2140,6 +2159,7 @@ static struct omap_hwmod_ocp_if omap36xx_l4_core__sr2 = {
 	.master		= &omap3xxx_l4_core_hwmod,
 	.slave		= &omap36xx_sr2_hwmod,
 	.clk		= "sr_l4_ick",
+	.addr		= omap3_sr2_addr_space,
 	.user		= OCP_USER_MPU,
 };
 
@@ -3111,16 +3131,20 @@ static struct omap_hwmod_ocp_if *omap3xxx_dss_hwmod_ocp_ifs[] __initdata = {
  * Return: 0 if device named @dev_name is not likely to be accessible,
  * or 1 if it is likely to be accessible.
  */
-static int __init omap3xxx_hwmod_is_hs_ip_block_usable(struct device_node *bus,
-						       const char *dev_name)
+static bool __init omap3xxx_hwmod_is_hs_ip_block_usable(struct device_node *bus,
+							const char *dev_name)
 {
+	struct device_node *node;
+	bool available;
+
 	if (!bus)
-		return (omap_type() == OMAP2_DEVICE_TYPE_GP) ? 1 : 0;
+		return omap_type() == OMAP2_DEVICE_TYPE_GP;
 
-	if (of_device_is_available(of_find_node_by_name(bus, dev_name)))
-		return 1;
+	node = of_get_child_by_name(bus, dev_name);
+	available = of_device_is_available(node);
+	of_node_put(node);
 
-	return 0;
+	return available;
 }
 
 int __init omap3xxx_hwmod_init(void)
@@ -3189,15 +3213,20 @@ int __init omap3xxx_hwmod_init(void)
 
 	if (h_sham && omap3xxx_hwmod_is_hs_ip_block_usable(bus, "sham")) {
 		r = omap_hwmod_register_links(h_sham);
-		if (r < 0)
+		if (r < 0) {
+			of_node_put(bus);
 			return r;
+		}
 	}
 
 	if (h_aes && omap3xxx_hwmod_is_hs_ip_block_usable(bus, "aes")) {
 		r = omap_hwmod_register_links(h_aes);
-		if (r < 0)
+		if (r < 0) {
+			of_node_put(bus);
 			return r;
+		}
 	}
+	of_node_put(bus);
 
 	/*
 	 * Register hwmod links specific to certain ES levels of a

arch/arm/tools/syscall.tbl

@@ -411,3 +411,4 @@
 394	common	pkey_mprotect		sys_pkey_mprotect
 395	common	pkey_alloc		sys_pkey_alloc
 396	common	pkey_free		sys_pkey_free
+397	common	statx			sys_statx

arch/arm64/boot/dts/broadcom/ns2.dtsi

@@ -114,6 +114,7 @@
 	pcie0: pcie@20020000 {
 		compatible = "brcm,iproc-pcie";
 		reg = <0 0x20020000 0 0x1000>;
+		dma-coherent;
 
 		#interrupt-cells = <1>;
 		interrupt-map-mask = <0 0 0 0>;
@@ -144,6 +145,7 @@
 	pcie4: pcie@50020000 {
 		compatible = "brcm,iproc-pcie";
 		reg = <0 0x50020000 0 0x1000>;
+		dma-coherent;
 
 		#interrupt-cells = <1>;
 		interrupt-map-mask = <0 0 0 0>;
@@ -174,6 +176,7 @@
 	pcie8: pcie@60c00000 {
 		compatible = "brcm,iproc-pcie-paxc";
 		reg = <0 0x60c00000 0 0x1000>;
+		dma-coherent;
 		linux,pci-domain = <8>;
 
 		bus-range = <0x0 0x1>;
@@ -203,6 +206,7 @@
 			      <0x61030000 0x100>;
 			reg-names = "amac_base", "idm_base", "nicpm_base";
 			interrupts = <GIC_SPI 341 IRQ_TYPE_LEVEL_HIGH>;
+			dma-coherent;
 			phy-handle = <&gphy0>;
 			phy-mode = "rgmii";
 			status = "disabled";
@@ -213,6 +217,7 @@
 			reg = <0x612c0000 0x445>;  /* PDC FS0 regs */
 			interrupts = <GIC_SPI 187 IRQ_TYPE_LEVEL_HIGH>;
 			#mbox-cells = <1>;
+			dma-coherent;
 			brcm,rx-status-len = <32>;
 			brcm,use-bcm-hdr;
 		};
@@ -222,6 +227,7 @@
 			reg = <0x612e0000 0x445>;  /* PDC FS1 regs */
 			interrupts = <GIC_SPI 189 IRQ_TYPE_LEVEL_HIGH>;
 			#mbox-cells = <1>;
+			dma-coherent;
 			brcm,rx-status-len = <32>;
 			brcm,use-bcm-hdr;
 		};
@@ -231,6 +237,7 @@
 			reg = <0x61300000 0x445>;  /* PDC FS2 regs */
 			interrupts = <GIC_SPI 191 IRQ_TYPE_LEVEL_HIGH>;
 			#mbox-cells = <1>;
+			dma-coherent;
 			brcm,rx-status-len = <32>;
 			brcm,use-bcm-hdr;
 		};
@@ -240,6 +247,7 @@
 			reg = <0x61320000 0x445>;  /* PDC FS3 regs */
 			interrupts = <GIC_SPI 193 IRQ_TYPE_LEVEL_HIGH>;
 			#mbox-cells = <1>;
+			dma-coherent;
 			brcm,rx-status-len = <32>;
 			brcm,use-bcm-hdr;
 		};
@@ -644,6 +652,7 @@
 		sata: ahci@663f2000 {
 			compatible = "brcm,iproc-ahci", "generic-ahci";
 			reg = <0x663f2000 0x1000>;
+			dma-coherent;
 			reg-names = "ahci";
 			interrupts = <GIC_SPI 438 IRQ_TYPE_LEVEL_HIGH>;
 			#address-cells = <1>;
@@ -667,6 +676,7 @@
 			compatible = "brcm,sdhci-iproc-cygnus";
 			reg = <0x66420000 0x100>;
 			interrupts = <GIC_SPI 421 IRQ_TYPE_LEVEL_HIGH>;
+			dma-coherent;
 			bus-width = <8>;
 			clocks = <&genpll_sw BCM_NS2_GENPLL_SW_SDIO_CLK>;
 			status = "disabled";
@@ -676,6 +686,7 @@
 			compatible = "brcm,sdhci-iproc-cygnus";
 			reg = <0x66430000 0x100>;
 			interrupts = <GIC_SPI 422 IRQ_TYPE_LEVEL_HIGH>;
+			dma-coherent;
 			bus-width = <8>;
 			clocks = <&genpll_sw BCM_NS2_GENPLL_SW_SDIO_CLK>;
 			status = "disabled";

arch/arm64/include/asm/current.h

@@ -3,8 +3,6 @@
 
 #include <linux/compiler.h>
 
-#include <asm/sysreg.h>
-
 #ifndef __ASSEMBLY__
 
 struct task_struct;

arch/arm64/include/asm/unistd.h

@@ -44,7 +44,7 @@
 #define __ARM_NR_compat_cacheflush	(__ARM_NR_COMPAT_BASE+2)
 #define __ARM_NR_compat_set_tls		(__ARM_NR_COMPAT_BASE+5)
 
-#define __NR_compat_syscalls		394
+#define __NR_compat_syscalls		398
 #endif
 
 #define __ARCH_WANT_SYS_CLONE

arch/arm64/include/asm/unistd32.h

@@ -809,6 +809,14 @@ __SYSCALL(__NR_copy_file_range, sys_copy_file_range)
 __SYSCALL(__NR_preadv2, compat_sys_preadv2)
 #define __NR_pwritev2 393
 __SYSCALL(__NR_pwritev2, compat_sys_pwritev2)
+#define __NR_pkey_mprotect 394
+__SYSCALL(__NR_pkey_mprotect, sys_pkey_mprotect)
+#define __NR_pkey_alloc 395
+__SYSCALL(__NR_pkey_alloc, sys_pkey_alloc)
+#define __NR_pkey_free 396
+__SYSCALL(__NR_pkey_free, sys_pkey_free)
+#define __NR_statx 397
+__SYSCALL(__NR_statx, sys_statx)
 
 /*
  * Please add new compat syscalls above this comment and update

arch/arm64/kernel/kaslr.c

@@ -131,11 +131,15 @@ u64 __init kaslr_early_init(u64 dt_phys, u64 modulo_offset)
 	/*
 	 * The kernel Image should not extend across a 1GB/32MB/512MB alignment
 	 * boundary (for 4KB/16KB/64KB granule kernels, respectively). If this
-	 * happens, increase the KASLR offset by the size of the kernel image.
+	 * happens, increase the KASLR offset by the size of the kernel image
+	 * rounded up by SWAPPER_BLOCK_SIZE.
 	 */
 	if ((((u64)_text + offset + modulo_offset) >> SWAPPER_TABLE_SHIFT) !=
-	    (((u64)_end + offset + modulo_offset) >> SWAPPER_TABLE_SHIFT))
-		offset = (offset + (u64)(_end - _text)) & mask;
+	    (((u64)_end + offset + modulo_offset) >> SWAPPER_TABLE_SHIFT)) {
+		u64 kimg_sz = _end - _text;
+		offset = (offset + round_up(kimg_sz, SWAPPER_BLOCK_SIZE))
+				& mask;
+	}
 
 	if (IS_ENABLED(CONFIG_KASAN))
 		/*

arch/arm64/kernel/smp.c

@@ -944,7 +944,7 @@ static bool have_cpu_die(void)
 #ifdef CONFIG_HOTPLUG_CPU
 	int any_cpu = raw_smp_processor_id();
 
-	if (cpu_ops[any_cpu]->cpu_die)
+	if (cpu_ops[any_cpu] && cpu_ops[any_cpu]->cpu_die)
 		return true;
 #endif
 	return false;

arch/arm64/kernel/vdso/.gitignore

@@ -1,2 +1 @@
 vdso.lds
-vdso-offsets.h

arch/c6x/kernel/ptrace.c

@@ -70,46 +70,6 @@ static int gpr_get(struct task_struct *target,
 				   0, sizeof(*regs));
 }
 
-static int gpr_set(struct task_struct *target,
-		   const struct user_regset *regset,
-		   unsigned int pos, unsigned int count,
-		   const void *kbuf, const void __user *ubuf)
-{
-	int ret;
-	struct pt_regs *regs = task_pt_regs(target);
-
-	/* Don't copyin TSR or CSR */
-	ret = user_regset_copyin(&pos, &count, &kbuf, &ubuf,
-				 &regs,
-				 0, PT_TSR * sizeof(long));
-	if (ret)
-		return ret;
-
-	ret = user_regset_copyin_ignore(&pos, &count, &kbuf, &ubuf,
-					PT_TSR * sizeof(long),
-					(PT_TSR + 1) * sizeof(long));
-	if (ret)
-		return ret;
-
-	ret = user_regset_copyin(&pos, &count, &kbuf, &ubuf,
-				 &regs,
-				 (PT_TSR + 1) * sizeof(long),
-				 PT_CSR * sizeof(long));
-	if (ret)
-		return ret;
-
-	ret = user_regset_copyin_ignore(&pos, &count, &kbuf, &ubuf,
-					PT_CSR * sizeof(long),
-					(PT_CSR + 1) * sizeof(long));
-	if (ret)
-		return ret;
-
-	ret = user_regset_copyin(&pos, &count, &kbuf, &ubuf,
-				 &regs,
-				 (PT_CSR + 1) * sizeof(long), -1);
-	return ret;
-}
-
 enum c6x_regset {
 	REGSET_GPR,
 };
@@ -121,7 +81,6 @@ static const struct user_regset c6x_regsets[] = {
 		.size = sizeof(u32),
 		.align = sizeof(u32),
 		.get = gpr_get,
-		.set = gpr_set
 	},
 };
 

arch/h8300/kernel/ptrace.c

@@ -95,7 +95,8 @@ static int regs_get(struct task_struct *target,
 	long *reg = (long *)&regs;
 
 	/* build user regs in buffer */
-	for (r = 0; r < ARRAY_SIZE(register_offset); r++)
+	BUILD_BUG_ON(sizeof(regs) % sizeof(long) != 0);
+	for (r = 0; r < sizeof(regs) / sizeof(long); r++)
 		*reg++ = h8300_get_reg(target, r);
 
 	return user_regset_copyout(&pos, &count, &kbuf, &ubuf,
@@ -113,7 +114,8 @@ static int regs_set(struct task_struct *target,
 	long *reg;
 
 	/* build user regs in buffer */
-	for (reg = (long *)&regs, r = 0; r < ARRAY_SIZE(register_offset); r++)
+	BUILD_BUG_ON(sizeof(regs) % sizeof(long) != 0);
+	for (reg = (long *)&regs, r = 0; r < sizeof(regs) / sizeof(long); r++)
 		*reg++ = h8300_get_reg(target, r);
 
 	ret = user_regset_copyin(&pos, &count, &kbuf, &ubuf,
@@ -122,7 +124,7 @@ static int regs_set(struct task_struct *target,
 		return ret;
 
 	/* write back to pt_regs */
-	for (reg = (long *)&regs, r = 0; r < ARRAY_SIZE(register_offset); r++)
+	for (reg = (long *)&regs, r = 0; r < sizeof(regs) / sizeof(long); r++)
 		h8300_put_reg(target, r, *reg++);
 	return 0;
 }

arch/m68k/configs/amiga_defconfig

@@ -25,6 +25,7 @@ CONFIG_SUN_PARTITION=y
 # CONFIG_EFI_PARTITION is not set
 CONFIG_SYSV68_PARTITION=y
 CONFIG_IOSCHED_DEADLINE=m
+CONFIG_MQ_IOSCHED_DEADLINE=m
 CONFIG_KEXEC=y
 CONFIG_BOOTINFO_PROC=y
 CONFIG_M68020=y
@@ -60,6 +61,7 @@ CONFIG_NET_IPVTI=m
 CONFIG_NET_FOU_IP_TUNNELS=y
 CONFIG_INET_AH=m
 CONFIG_INET_ESP=m
+CONFIG_INET_ESP_OFFLOAD=m
 CONFIG_INET_IPCOMP=m
 CONFIG_INET_XFRM_MODE_TRANSPORT=m
 CONFIG_INET_XFRM_MODE_TUNNEL=m
@@ -71,6 +73,7 @@ CONFIG_IPV6=m
 CONFIG_IPV6_ROUTER_PREF=y
 CONFIG_INET6_AH=m
 CONFIG_INET6_ESP=m
+CONFIG_INET6_ESP_OFFLOAD=m
 CONFIG_INET6_IPCOMP=m
 CONFIG_IPV6_ILA=m
 CONFIG_IPV6_VTI=m
@@ -101,6 +104,7 @@ CONFIG_NFT_NUMGEN=m
 CONFIG_NFT_CT=m
 CONFIG_NFT_SET_RBTREE=m
 CONFIG_NFT_SET_HASH=m
+CONFIG_NFT_SET_BITMAP=m
 CONFIG_NFT_COUNTER=m
 CONFIG_NFT_LOG=m
 CONFIG_NFT_LIMIT=m
@@ -298,6 +302,8 @@ CONFIG_MPLS_IPTUNNEL=m
 CONFIG_NET_L3_MASTER_DEV=y
 CONFIG_AF_KCM=m
 # CONFIG_WIRELESS is not set
+CONFIG_PSAMPLE=m
+CONFIG_NET_IFE=m
 CONFIG_NET_DEVLINK=m
 # CONFIG_UEVENT_HELPER is not set
 CONFIG_DEVTMPFS=y
@@ -371,6 +377,7 @@ CONFIG_NET_TEAM_MODE_LOADBALANCE=m
 CONFIG_MACVLAN=m
 CONFIG_MACVTAP=m
 CONFIG_IPVLAN=m
+CONFIG_IPVTAP=m
 CONFIG_VXLAN=m
 CONFIG_GENEVE=m
 CONFIG_GTP=m
@@ -383,6 +390,7 @@ CONFIG_VETH=m
 # CONFIG_NET_VENDOR_AMAZON is not set
 CONFIG_A2065=y
 CONFIG_ARIADNE=y
+# CONFIG_NET_VENDOR_AQUANTIA is not set
 # CONFIG_NET_VENDOR_ARC is not set
 # CONFIG_NET_CADENCE is not set
 # CONFIG_NET_VENDOR_BROADCOM is not set
@@ -404,7 +412,6 @@ CONFIG_ZORRO8390=y
 # CONFIG_NET_VENDOR_SOLARFLARE is not set
 # CONFIG_NET_VENDOR_SMSC is not set
 # CONFIG_NET_VENDOR_STMICRO is not set
-# CONFIG_NET_VENDOR_SYNOPSYS is not set
 # CONFIG_NET_VENDOR_VIA is not set
 # CONFIG_NET_VENDOR_WIZNET is not set
 CONFIG_PPP=m
@@ -564,6 +571,8 @@ CONFIG_NLS_MAC_TURKISH=m
 CONFIG_DLM=m
 # CONFIG_SECTION_MISMATCH_WARN_ONLY is not set
 CONFIG_MAGIC_SYSRQ=y
+CONFIG_WW_MUTEX_SELFTEST=m
+CONFIG_ATOMIC64_SELFTEST=m
 CONFIG_ASYNC_RAID6_TEST=m
 CONFIG_TEST_HEXDUMP=m
 CONFIG_TEST_STRING_HELPERS=m
@@ -594,6 +603,7 @@ CONFIG_CRYPTO_CHACHA20POLY1305=m
 CONFIG_CRYPTO_LRW=m
 CONFIG_CRYPTO_PCBC=m
 CONFIG_CRYPTO_KEYWRAP=m
+CONFIG_CRYPTO_CMAC=m
 CONFIG_CRYPTO_XCBC=m
 CONFIG_CRYPTO_VMAC=m
 CONFIG_CRYPTO_MICHAEL_MIC=m
@@ -605,6 +615,7 @@ CONFIG_CRYPTO_SHA512=m
 CONFIG_CRYPTO_SHA3=m
 CONFIG_CRYPTO_TGR192=m
 CONFIG_CRYPTO_WP512=m
+CONFIG_CRYPTO_AES_TI=m
 CONFIG_CRYPTO_ANUBIS=m
 CONFIG_CRYPTO_BLOWFISH=m
 CONFIG_CRYPTO_CAMELLIA=m
@@ -629,4 +640,5 @@ CONFIG_CRYPTO_USER_API_SKCIPHER=m
 CONFIG_CRYPTO_USER_API_RNG=m
 CONFIG_CRYPTO_USER_API_AEAD=m
 # CONFIG_CRYPTO_HW is not set
+CONFIG_CRC32_SELFTEST=m
 CONFIG_XZ_DEC_TEST=m

arch/m68k/configs/apollo_defconfig

@@ -26,6 +26,7 @@ CONFIG_SUN_PARTITION=y
 # CONFIG_EFI_PARTITION is not set
 CONFIG_SYSV68_PARTITION=y
 CONFIG_IOSCHED_DEADLINE=m
+CONFIG_MQ_IOSCHED_DEADLINE=m
 CONFIG_KEXEC=y
 CONFIG_BOOTINFO_PROC=y
 CONFIG_M68020=y
@@ -58,6 +59,7 @@ CONFIG_NET_IPVTI=m
 CONFIG_NET_FOU_IP_TUNNELS=y
 CONFIG_INET_AH=m
 CONFIG_INET_ESP=m
+CONFIG_INET_ESP_OFFLOAD=m
 CONFIG_INET_IPCOMP=m
 CONFIG_INET_XFRM_MODE_TRANSPORT=m
 CONFIG_INET_XFRM_MODE_TUNNEL=m
@@ -69,6 +71,7 @@ CONFIG_IPV6=m
 CONFIG_IPV6_ROUTER_PREF=y
 CONFIG_INET6_AH=m
 CONFIG_INET6_ESP=m
+CONFIG_INET6_ESP_OFFLOAD=m
 CONFIG_INET6_IPCOMP=m
 CONFIG_IPV6_ILA=m
 CONFIG_IPV6_VTI=m
@@ -99,6 +102,7 @@ CONFIG_NFT_NUMGEN=m
 CONFIG_NFT_CT=m
 CONFIG_NFT_SET_RBTREE=m
 CONFIG_NFT_SET_HASH=m
+CONFIG_NFT_SET_BITMAP=m
 CONFIG_NFT_COUNTER=m
 CONFIG_NFT_LOG=m
 CONFIG_NFT_LIMIT=m
@@ -296,6 +300,8 @@ CONFIG_MPLS_IPTUNNEL=m
 CONFIG_NET_L3_MASTER_DEV=y
 CONFIG_AF_KCM=m
 # CONFIG_WIRELESS is not set
+CONFIG_PSAMPLE=m
+CONFIG_NET_IFE=m
 CONFIG_NET_DEVLINK=m
 # CONFIG_UEVENT_HELPER is not set
 CONFIG_DEVTMPFS=y
@@ -353,6 +359,7 @@ CONFIG_NET_TEAM_MODE_LOADBALANCE=m
 CONFIG_MACVLAN=m
 CONFIG_MACVTAP=m
 CONFIG_IPVLAN=m
+CONFIG_IPVTAP=m
 CONFIG_VXLAN=m
 CONFIG_GENEVE=m
 CONFIG_GTP=m
@@ -362,6 +369,7 @@ CONFIG_NETCONSOLE_DYNAMIC=y
 CONFIG_VETH=m
 # CONFIG_NET_VENDOR_ALACRITECH is not set
 # CONFIG_NET_VENDOR_AMAZON is not set
+# CONFIG_NET_VENDOR_AQUANTIA is not set
 # CONFIG_NET_VENDOR_ARC is not set
 # CONFIG_NET_CADENCE is not set
 # CONFIG_NET_VENDOR_BROADCOM is not set
@@ -378,7 +386,6 @@ CONFIG_VETH=m
 # CONFIG_NET_VENDOR_SEEQ is not set
 # CONFIG_NET_VENDOR_SOLARFLARE is not set
 # CONFIG_NET_VENDOR_STMICRO is not set
-# CONFIG_NET_VENDOR_SYNOPSYS is not set
 # CONFIG_NET_VENDOR_VIA is not set
 # CONFIG_NET_VENDOR_WIZNET is not set
 CONFIG_PPP=m
@@ -523,6 +530,8 @@ CONFIG_NLS_MAC_TURKISH=m
 CONFIG_DLM=m
 # CONFIG_SECTION_MISMATCH_WARN_ONLY is not set
 CONFIG_MAGIC_SYSRQ=y
+CONFIG_WW_MUTEX_SELFTEST=m
+CONFIG_ATOMIC64_SELFTEST=m
 CONFIG_ASYNC_RAID6_TEST=m
 CONFIG_TEST_HEXDUMP=m
 CONFIG_TEST_STRING_HELPERS=m
@@ -553,6 +562,7 @@ CONFIG_CRYPTO_CHACHA20POLY1305=m
 CONFIG_CRYPTO_LRW=m
 CONFIG_CRYPTO_PCBC=m
 CONFIG_CRYPTO_KEYWRAP=m
+CONFIG_CRYPTO_CMAC=m
 CONFIG_CRYPTO_XCBC=m
 CONFIG_CRYPTO_VMAC=m
 CONFIG_CRYPTO_MICHAEL_MIC=m
@@ -564,6 +574,7 @@ CONFIG_CRYPTO_SHA512=m
 CONFIG_CRYPTO_SHA3=m
 CONFIG_CRYPTO_TGR192=m
 CONFIG_CRYPTO_WP512=m
+CONFIG_CRYPTO_AES_TI=m
 CONFIG_CRYPTO_ANUBIS=m
 CONFIG_CRYPTO_BLOWFISH=m
 CONFIG_CRYPTO_CAMELLIA=m
@@ -588,4 +599,5 @@ CONFIG_CRYPTO_USER_API_SKCIPHER=m
 CONFIG_CRYPTO_USER_API_RNG=m
 CONFIG_CRYPTO_USER_API_AEAD=m
 # CONFIG_CRYPTO_HW is not set
+CONFIG_CRC32_SELFTEST=m
 CONFIG_XZ_DEC_TEST=m

arch/m68k/configs/atari_defconfig

@@ -25,6 +25,7 @@ CONFIG_SUN_PARTITION=y
 # CONFIG_EFI_PARTITION is not set
 CONFIG_SYSV68_PARTITION=y
 CONFIG_IOSCHED_DEADLINE=m
+CONFIG_MQ_IOSCHED_DEADLINE=m
 CONFIG_KEXEC=y
 CONFIG_BOOTINFO_PROC=y
 CONFIG_M68020=y
@@ -58,6 +59,7 @@ CONFIG_NET_IPVTI=m
 CONFIG_NET_FOU_IP_TUNNELS=y
 CONFIG_INET_AH=m
 CONFIG_INET_ESP=m
+CONFIG_INET_ESP_OFFLOAD=m
 CONFIG_INET_IPCOMP=m
 CONFIG_INET_XFRM_MODE_TRANSPORT=m
 CONFIG_INET_XFRM_MODE_TUNNEL=m
@@ -69,6 +71,7 @@ CONFIG_IPV6=m
 CONFIG_IPV6_ROUTER_PREF=y
 CONFIG_INET6_AH=m
 CONFIG_INET6_ESP=m
+CONFIG_INET6_ESP_OFFLOAD=m
 CONFIG_INET6_IPCOMP=m
 CONFIG_IPV6_ILA=m
 CONFIG_IPV6_VTI=m
@@ -99,6 +102,7 @@ CONFIG_NFT_NUMGEN=m
 CONFIG_NFT_CT=m
 CONFIG_NFT_SET_RBTREE=m
 CONFIG_NFT_SET_HASH=m
+CONFIG_NFT_SET_BITMAP=m
 CONFIG_NFT_COUNTER=m
 CONFIG_NFT_LOG=m
 CONFIG_NFT_LIMIT=m
@@ -296,6 +300,8 @@ CONFIG_MPLS_IPTUNNEL=m
 CONFIG_NET_L3_MASTER_DEV=y
 CONFIG_AF_KCM=m
 # CONFIG_WIRELESS is not set
+CONFIG_PSAMPLE=m
+CONFIG_NET_IFE=m
 CONFIG_NET_DEVLINK=m
 # CONFIG_UEVENT_HELPER is not set
 CONFIG_DEVTMPFS=y
@@ -362,6 +368,7 @@ CONFIG_NET_TEAM_MODE_LOADBALANCE=m
 CONFIG_MACVLAN=m
 CONFIG_MACVTAP=m
 CONFIG_IPVLAN=m
+CONFIG_IPVTAP=m
 CONFIG_VXLAN=m
 CONFIG_GENEVE=m
 CONFIG_GTP=m
@@ -372,6 +379,7 @@ CONFIG_VETH=m
 # CONFIG_NET_VENDOR_ALACRITECH is not set
 # CONFIG_NET_VENDOR_AMAZON is not set
 CONFIG_ATARILANCE=y
+# CONFIG_NET_VENDOR_AQUANTIA is not set
 # CONFIG_NET_VENDOR_ARC is not set
 # CONFIG_NET_CADENCE is not set
 # CONFIG_NET_VENDOR_BROADCOM is not set
@@ -389,7 +397,6 @@ CONFIG_NE2000=y
 # CONFIG_NET_VENDOR_SOLARFLARE is not set
 CONFIG_SMC91X=y
 # CONFIG_NET_VENDOR_STMICRO is not set
-# CONFIG_NET_VENDOR_SYNOPSYS is not set
 # CONFIG_NET_VENDOR_VIA is not set
 # CONFIG_NET_VENDOR_WIZNET is not set
 CONFIG_PPP=m
@@ -544,6 +551,8 @@ CONFIG_NLS_MAC_TURKISH=m
 CONFIG_DLM=m
 # CONFIG_SECTION_MISMATCH_WARN_ONLY is not set
 CONFIG_MAGIC_SYSRQ=y
+CONFIG_WW_MUTEX_SELFTEST=m
+CONFIG_ATOMIC64_SELFTEST=m
 CONFIG_ASYNC_RAID6_TEST=m
 CONFIG_TEST_HEXDUMP=m
 CONFIG_TEST_STRING_HELPERS=m
@@ -574,6 +583,7 @@ CONFIG_CRYPTO_CHACHA20POLY1305=m
 CONFIG_CRYPTO_LRW=m
 CONFIG_CRYPTO_PCBC=m
 CONFIG_CRYPTO_KEYWRAP=m
+CONFIG_CRYPTO_CMAC=m
 CONFIG_CRYPTO_XCBC=m
 CONFIG_CRYPTO_VMAC=m
 CONFIG_CRYPTO_MICHAEL_MIC=m
@@ -585,6 +595,7 @@ CONFIG_CRYPTO_SHA512=m
 CONFIG_CRYPTO_SHA3=m
 CONFIG_CRYPTO_TGR192=m
 CONFIG_CRYPTO_WP512=m
+CONFIG_CRYPTO_AES_TI=m
 CONFIG_CRYPTO_ANUBIS=m
 CONFIG_CRYPTO_BLOWFISH=m
 CONFIG_CRYPTO_CAMELLIA=m
@@ -609,4 +620,5 @@ CONFIG_CRYPTO_USER_API_SKCIPHER=m
 CONFIG_CRYPTO_USER_API_RNG=m
 CONFIG_CRYPTO_USER_API_AEAD=m
 # CONFIG_CRYPTO_HW is not set
+CONFIG_CRC32_SELFTEST=m
 CONFIG_XZ_DEC_TEST=m

arch/m68k/configs/bvme6000_defconfig

@@ -25,6 +25,7 @@ CONFIG_UNIXWARE_DISKLABEL=y
 CONFIG_SUN_PARTITION=y
 # CONFIG_EFI_PARTITION is not set
 CONFIG_IOSCHED_DEADLINE=m
+CONFIG_MQ_IOSCHED_DEADLINE=m
 CONFIG_KEXEC=y
 CONFIG_BOOTINFO_PROC=y
 CONFIG_M68040=y
@@ -56,6 +57,7 @@ CONFIG_NET_IPVTI=m
 CONFIG_NET_FOU_IP_TUNNELS=y
 CONFIG_INET_AH=m
 CONFIG_INET_ESP=m
+CONFIG_INET_ESP_OFFLOAD=m
 CONFIG_INET_IPCOMP=m
 CONFIG_INET_XFRM_MODE_TRANSPORT=m
 CONFIG_INET_XFRM_MODE_TUNNEL=m
@@ -67,6 +69,7 @@ CONFIG_IPV6=m
 CONFIG_IPV6_ROUTER_PREF=y
 CONFIG_INET6_AH=m
 CONFIG_INET6_ESP=m
+CONFIG_INET6_ESP_OFFLOAD=m
 CONFIG_INET6_IPCOMP=m
 CONFIG_IPV6_ILA=m
 CONFIG_IPV6_VTI=m
@@ -97,6 +100,7 @@ CONFIG_NFT_NUMGEN=m
 CONFIG_NFT_CT=m
 CONFIG_NFT_SET_RBTREE=m
 CONFIG_NFT_SET_HASH=m
+CONFIG_NFT_SET_BITMAP=m
 CONFIG_NFT_COUNTER=m
 CONFIG_NFT_LOG=m
 CONFIG_NFT_LIMIT=m
@@ -294,6 +298,8 @@ CONFIG_MPLS_IPTUNNEL=m
 CONFIG_NET_L3_MASTER_DEV=y
 CONFIG_AF_KCM=m
 # CONFIG_WIRELESS is not set
+CONFIG_PSAMPLE=m
+CONFIG_NET_IFE=m
 CONFIG_NET_DEVLINK=m
 # CONFIG_UEVENT_HELPER is not set
 CONFIG_DEVTMPFS=y
@@ -352,6 +358,7 @@ CONFIG_NET_TEAM_MODE_LOADBALANCE=m
 CONFIG_MACVLAN=m
 CONFIG_MACVTAP=m
 CONFIG_IPVLAN=m
+CONFIG_IPVTAP=m
 CONFIG_VXLAN=m
 CONFIG_GENEVE=m
 CONFIG_GTP=m
@@ -361,6 +368,7 @@ CONFIG_NETCONSOLE_DYNAMIC=y
 CONFIG_VETH=m
 # CONFIG_NET_VENDOR_ALACRITECH is not set
 # CONFIG_NET_VENDOR_AMAZON is not set
+# CONFIG_NET_VENDOR_AQUANTIA is not set
 # CONFIG_NET_VENDOR_ARC is not set
 # CONFIG_NET_CADENCE is not set
 # CONFIG_NET_VENDOR_BROADCOM is not set
@@ -377,7 +385,6 @@ CONFIG_BVME6000_NET=y
 # CONFIG_NET_VENDOR_SEEQ is not set
 # CONFIG_NET_VENDOR_SOLARFLARE is not set
 # CONFIG_NET_VENDOR_STMICRO is not set
-# CONFIG_NET_VENDOR_SYNOPSYS is not set
 # CONFIG_NET_VENDOR_VIA is not set
 # CONFIG_NET_VENDOR_WIZNET is not set
 CONFIG_PPP=m
@@ -515,6 +522,8 @@ CONFIG_NLS_MAC_TURKISH=m
 CONFIG_DLM=m
 # CONFIG_SECTION_MISMATCH_WARN_ONLY is not set
 CONFIG_MAGIC_SYSRQ=y
+CONFIG_WW_MUTEX_SELFTEST=m
+CONFIG_ATOMIC64_SELFTEST=m
 CONFIG_ASYNC_RAID6_TEST=m
 CONFIG_TEST_HEXDUMP=m
 CONFIG_TEST_STRING_HELPERS=m
@@ -545,6 +554,7 @@ CONFIG_CRYPTO_CHACHA20POLY1305=m
 CONFIG_CRYPTO_LRW=m
 CONFIG_CRYPTO_PCBC=m
 CONFIG_CRYPTO_KEYWRAP=m
+CONFIG_CRYPTO_CMAC=m
 CONFIG_CRYPTO_XCBC=m
 CONFIG_CRYPTO_VMAC=m
 CONFIG_CRYPTO_MICHAEL_MIC=m
@@ -556,6 +566,7 @@ CONFIG_CRYPTO_SHA512=m
 CONFIG_CRYPTO_SHA3=m
 CONFIG_CRYPTO_TGR192=m
 CONFIG_CRYPTO_WP512=m
+CONFIG_CRYPTO_AES_TI=m
 CONFIG_CRYPTO_ANUBIS=m
 CONFIG_CRYPTO_BLOWFISH=m
 CONFIG_CRYPTO_CAMELLIA=m
@@ -580,4 +591,5 @@ CONFIG_CRYPTO_USER_API_SKCIPHER=m
 CONFIG_CRYPTO_USER_API_RNG=m
 CONFIG_CRYPTO_USER_API_AEAD=m
 # CONFIG_CRYPTO_HW is not set
+CONFIG_CRC32_SELFTEST=m
 CONFIG_XZ_DEC_TEST=m

arch/m68k/configs/hp300_defconfig

@@ -26,6 +26,7 @@ CONFIG_SUN_PARTITION=y
 # CONFIG_EFI_PARTITION is not set
 CONFIG_SYSV68_PARTITION=y
 CONFIG_IOSCHED_DEADLINE=m
+CONFIG_MQ_IOSCHED_DEADLINE=m
 CONFIG_KEXEC=y
 CONFIG_BOOTINFO_PROC=y
 CONFIG_M68020=y
@@ -58,6 +59,7 @@ CONFIG_NET_IPVTI=m
 CONFIG_NET_FOU_IP_TUNNELS=y
 CONFIG_INET_AH=m
 CONFIG_INET_ESP=m
+CONFIG_INET_ESP_OFFLOAD=m
 CONFIG_INET_IPCOMP=m
 CONFIG_INET_XFRM_MODE_TRANSPORT=m
 CONFIG_INET_XFRM_MODE_TUNNEL=m
@@ -69,6 +71,7 @@ CONFIG_IPV6=m
 CONFIG_IPV6_ROUTER_PREF=y
 CONFIG_INET6_AH=m
 CONFIG_INET6_ESP=m
+CONFIG_INET6_ESP_OFFLOAD=m
 CONFIG_INET6_IPCOMP=m
 CONFIG_IPV6_ILA=m
 CONFIG_IPV6_VTI=m
@@ -99,6 +102,7 @@ CONFIG_NFT_NUMGEN=m
 CONFIG_NFT_CT=m
 CONFIG_NFT_SET_RBTREE=m
 CONFIG_NFT_SET_HASH=m
+CONFIG_NFT_SET_BITMAP=m
 CONFIG_NFT_COUNTER=m
 CONFIG_NFT_LOG=m
 CONFIG_NFT_LIMIT=m
@@ -296,6 +300,8 @@ CONFIG_MPLS_IPTUNNEL=m
 CONFIG_NET_L3_MASTER_DEV=y
 CONFIG_AF_KCM=m
 # CONFIG_WIRELESS is not set
+CONFIG_PSAMPLE=m
+CONFIG_NET_IFE=m
 CONFIG_NET_DEVLINK=m
 # CONFIG_UEVENT_HELPER is not set
 CONFIG_DEVTMPFS=y
@@ -353,6 +359,7 @@ CONFIG_NET_TEAM_MODE_LOADBALANCE=m
 CONFIG_MACVLAN=m
 CONFIG_MACVTAP=m
 CONFIG_IPVLAN=m
+CONFIG_IPVTAP=m
 CONFIG_VXLAN=m
 CONFIG_GENEVE=m
 CONFIG_GTP=m
@@ -363,6 +370,7 @@ CONFIG_VETH=m
 # CONFIG_NET_VENDOR_ALACRITECH is not set
 # CONFIG_NET_VENDOR_AMAZON is not set
 CONFIG_HPLANCE=y
+# CONFIG_NET_VENDOR_AQUANTIA is not set
 # CONFIG_NET_VENDOR_ARC is not set
 # CONFIG_NET_CADENCE is not set
 # CONFIG_NET_VENDOR_BROADCOM is not set
@@ -379,7 +387,6 @@ CONFIG_HPLANCE=y
 # CONFIG_NET_VENDOR_SEEQ is not set
 # CONFIG_NET_VENDOR_SOLARFLARE is not set
 # CONFIG_NET_VENDOR_STMICRO is not set
-# CONFIG_NET_VENDOR_SYNOPSYS is not set
 # CONFIG_NET_VENDOR_VIA is not set
 # CONFIG_NET_VENDOR_WIZNET is not set
 CONFIG_PPP=m
@@ -525,6 +532,8 @@ CONFIG_NLS_MAC_TURKISH=m
 CONFIG_DLM=m
 # CONFIG_SECTION_MISMATCH_WARN_ONLY is not set
 CONFIG_MAGIC_SYSRQ=y
+CONFIG_WW_MUTEX_SELFTEST=m
+CONFIG_ATOMIC64_SELFTEST=m
 CONFIG_ASYNC_RAID6_TEST=m
 CONFIG_TEST_HEXDUMP=m
 CONFIG_TEST_STRING_HELPERS=m
@@ -555,6 +564,7 @@ CONFIG_CRYPTO_CHACHA20POLY1305=m
 CONFIG_CRYPTO_LRW=m
 CONFIG_CRYPTO_PCBC=m
 CONFIG_CRYPTO_KEYWRAP=m
+CONFIG_CRYPTO_CMAC=m
 CONFIG_CRYPTO_XCBC=m
 CONFIG_CRYPTO_VMAC=m
 CONFIG_CRYPTO_MICHAEL_MIC=m
@@ -566,6 +576,7 @@ CONFIG_CRYPTO_SHA512=m
 CONFIG_CRYPTO_SHA3=m
 CONFIG_CRYPTO_TGR192=m
 CONFIG_CRYPTO_WP512=m
+CONFIG_CRYPTO_AES_TI=m
 CONFIG_CRYPTO_ANUBIS=m
 CONFIG_CRYPTO_BLOWFISH=m
 CONFIG_CRYPTO_CAMELLIA=m
@@ -590,4 +601,5 @@ CONFIG_CRYPTO_USER_API_SKCIPHER=m
 CONFIG_CRYPTO_USER_API_RNG=m
 CONFIG_CRYPTO_USER_API_AEAD=m
 # CONFIG_CRYPTO_HW is not set
+CONFIG_CRC32_SELFTEST=m
 CONFIG_XZ_DEC_TEST=m

arch/m68k/configs/mac_defconfig

@@ -25,6 +25,7 @@ CONFIG_SUN_PARTITION=y
 # CONFIG_EFI_PARTITION is not set
 CONFIG_SYSV68_PARTITION=y
 CONFIG_IOSCHED_DEADLINE=m
+CONFIG_MQ_IOSCHED_DEADLINE=m
 CONFIG_KEXEC=y
 CONFIG_BOOTINFO_PROC=y
 CONFIG_M68020=y
@@ -57,6 +58,7 @@ CONFIG_NET_IPVTI=m
 CONFIG_NET_FOU_IP_TUNNELS=y
 CONFIG_INET_AH=m
 CONFIG_INET_ESP=m
+CONFIG_INET_ESP_OFFLOAD=m
 CONFIG_INET_IPCOMP=m
 CONFIG_INET_XFRM_MODE_TRANSPORT=m
 CONFIG_INET_XFRM_MODE_TUNNEL=m
@@ -68,6 +70,7 @@ CONFIG_IPV6=m
 CONFIG_IPV6_ROUTER_PREF=y
 CONFIG_INET6_AH=m
 CONFIG_INET6_ESP=m
+CONFIG_INET6_ESP_OFFLOAD=m
 CONFIG_INET6_IPCOMP=m
 CONFIG_IPV6_ILA=m
 CONFIG_IPV6_VTI=m
@@ -98,6 +101,7 @@ CONFIG_NFT_NUMGEN=m
 CONFIG_NFT_CT=m
 CONFIG_NFT_SET_RBTREE=m
 CONFIG_NFT_SET_HASH=m
+CONFIG_NFT_SET_BITMAP=m
 CONFIG_NFT_COUNTER=m
 CONFIG_NFT_LOG=m
 CONFIG_NFT_LIMIT=m
@@ -298,6 +302,8 @@ CONFIG_MPLS_IPTUNNEL=m
 CONFIG_NET_L3_MASTER_DEV=y
 CONFIG_AF_KCM=m
 # CONFIG_WIRELESS is not set
+CONFIG_PSAMPLE=m
+CONFIG_NET_IFE=m
 CONFIG_NET_DEVLINK=m
 # CONFIG_UEVENT_HELPER is not set
 CONFIG_DEVTMPFS=y
@@ -369,6 +375,7 @@ CONFIG_NET_TEAM_MODE_LOADBALANCE=m
 CONFIG_MACVLAN=m
 CONFIG_MACVTAP=m
 CONFIG_IPVLAN=m
+CONFIG_IPVTAP=m
 CONFIG_VXLAN=m
 CONFIG_GENEVE=m
 CONFIG_GTP=m
@@ -379,6 +386,7 @@ CONFIG_VETH=m
 # CONFIG_NET_VENDOR_ALACRITECH is not set
 # CONFIG_NET_VENDOR_AMAZON is not set
 CONFIG_MACMACE=y
+# CONFIG_NET_VENDOR_AQUANTIA is not set
 # CONFIG_NET_VENDOR_ARC is not set
 # CONFIG_NET_CADENCE is not set
 # CONFIG_NET_VENDOR_BROADCOM is not set
@@ -398,7 +406,6 @@ CONFIG_MAC8390=y
 # CONFIG_NET_VENDOR_SOLARFLARE is not set
 # CONFIG_NET_VENDOR_SMSC is not set
 # CONFIG_NET_VENDOR_STMICRO is not set
-# CONFIG_NET_VENDOR_SYNOPSYS is not set
 # CONFIG_NET_VENDOR_VIA is not set
 # CONFIG_NET_VENDOR_WIZNET is not set
 CONFIG_PPP=m
@@ -547,6 +554,8 @@ CONFIG_NLS_MAC_TURKISH=m
 CONFIG_DLM=m
 # CONFIG_SECTION_MISMATCH_WARN_ONLY is not set
 CONFIG_MAGIC_SYSRQ=y
+CONFIG_WW_MUTEX_SELFTEST=m
+CONFIG_ATOMIC64_SELFTEST=m
 CONFIG_ASYNC_RAID6_TEST=m
 CONFIG_TEST_HEXDUMP=m
 CONFIG_TEST_STRING_HELPERS=m
@@ -577,6 +586,7 @@ CONFIG_CRYPTO_CHACHA20POLY1305=m
 CONFIG_CRYPTO_LRW=m
 CONFIG_CRYPTO_PCBC=m
 CONFIG_CRYPTO_KEYWRAP=m
+CONFIG_CRYPTO_CMAC=m
 CONFIG_CRYPTO_XCBC=m
 CONFIG_CRYPTO_VMAC=m
 CONFIG_CRYPTO_MICHAEL_MIC=m
@@ -588,6 +598,7 @@ CONFIG_CRYPTO_SHA512=m
 CONFIG_CRYPTO_SHA3=m
 CONFIG_CRYPTO_TGR192=m
 CONFIG_CRYPTO_WP512=m
+CONFIG_CRYPTO_AES_TI=m
 CONFIG_CRYPTO_ANUBIS=m
 CONFIG_CRYPTO_BLOWFISH=m
 CONFIG_CRYPTO_CAMELLIA=m
@@ -612,4 +623,5 @@ CONFIG_CRYPTO_USER_API_SKCIPHER=m
 CONFIG_CRYPTO_USER_API_RNG=m
 CONFIG_CRYPTO_USER_API_AEAD=m
 # CONFIG_CRYPTO_HW is not set
+CONFIG_CRC32_SELFTEST=m
 CONFIG_XZ_DEC_TEST=m

arch/m68k/configs/multi_defconfig

@@ -21,6 +21,7 @@ CONFIG_SOLARIS_X86_PARTITION=y
 CONFIG_UNIXWARE_DISKLABEL=y
 # CONFIG_EFI_PARTITION is not set
 CONFIG_IOSCHED_DEADLINE=m
+CONFIG_MQ_IOSCHED_DEADLINE=m
 CONFIG_KEXEC=y
 CONFIG_BOOTINFO_PROC=y
 CONFIG_M68020=y
@@ -67,6 +68,7 @@ CONFIG_NET_IPVTI=m
 CONFIG_NET_FOU_IP_TUNNELS=y
 CONFIG_INET_AH=m
 CONFIG_INET_ESP=m
+CONFIG_INET_ESP_OFFLOAD=m
 CONFIG_INET_IPCOMP=m
 CONFIG_INET_XFRM_MODE_TRANSPORT=m
 CONFIG_INET_XFRM_MODE_TUNNEL=m
@@ -78,6 +80,7 @@ CONFIG_IPV6=m
 CONFIG_IPV6_ROUTER_PREF=y
 CONFIG_INET6_AH=m
 CONFIG_INET6_ESP=m
+CONFIG_INET6_ESP_OFFLOAD=m
 CONFIG_INET6_IPCOMP=m
 CONFIG_IPV6_ILA=m
 CONFIG_IPV6_VTI=m
@@ -108,6 +111,7 @@ CONFIG_NFT_NUMGEN=m
 CONFIG_NFT_CT=m
 CONFIG_NFT_SET_RBTREE=m
 CONFIG_NFT_SET_HASH=m
+CONFIG_NFT_SET_BITMAP=m
 CONFIG_NFT_COUNTER=m
 CONFIG_NFT_LOG=m
 CONFIG_NFT_LIMIT=m
@@ -308,6 +312,8 @@ CONFIG_MPLS_IPTUNNEL=m
 CONFIG_NET_L3_MASTER_DEV=y
 CONFIG_AF_KCM=m
 # CONFIG_WIRELESS is not set
+CONFIG_PSAMPLE=m
+CONFIG_NET_IFE=m
 CONFIG_NET_DEVLINK=m
 # CONFIG_UEVENT_HELPER is not set
 CONFIG_DEVTMPFS=y
@@ -402,6 +408,7 @@ CONFIG_NET_TEAM_MODE_LOADBALANCE=m
 CONFIG_MACVLAN=m
 CONFIG_MACVTAP=m
 CONFIG_IPVLAN=m
+CONFIG_IPVTAP=m
 CONFIG_VXLAN=m
 CONFIG_GENEVE=m
 CONFIG_GTP=m
@@ -419,6 +426,7 @@ CONFIG_HPLANCE=y
 CONFIG_MVME147_NET=y
 CONFIG_SUN3LANCE=y
 CONFIG_MACMACE=y
+# CONFIG_NET_VENDOR_AQUANTIA is not set
 # CONFIG_NET_VENDOR_ARC is not set
 # CONFIG_NET_CADENCE is not set
 # CONFIG_NET_VENDOR_BROADCOM is not set
@@ -444,7 +452,6 @@ CONFIG_ZORRO8390=y
 # CONFIG_NET_VENDOR_SOLARFLARE is not set
 CONFIG_SMC91X=y
 # CONFIG_NET_VENDOR_STMICRO is not set
-# CONFIG_NET_VENDOR_SYNOPSYS is not set
 # CONFIG_NET_VENDOR_VIA is not set
 # CONFIG_NET_VENDOR_WIZNET is not set
 CONFIG_PLIP=m
@@ -627,6 +634,8 @@ CONFIG_NLS_MAC_TURKISH=m
 CONFIG_DLM=m
 # CONFIG_SECTION_MISMATCH_WARN_ONLY is not set
 CONFIG_MAGIC_SYSRQ=y
+CONFIG_WW_MUTEX_SELFTEST=m
+CONFIG_ATOMIC64_SELFTEST=m
 CONFIG_ASYNC_RAID6_TEST=m
 CONFIG_TEST_HEXDUMP=m
 CONFIG_TEST_STRING_HELPERS=m
@@ -657,6 +666,7 @@ CONFIG_CRYPTO_CHACHA20POLY1305=m
 CONFIG_CRYPTO_LRW=m
 CONFIG_CRYPTO_PCBC=m
 CONFIG_CRYPTO_KEYWRAP=m
+CONFIG_CRYPTO_CMAC=m
 CONFIG_CRYPTO_XCBC=m
 CONFIG_CRYPTO_VMAC=m
 CONFIG_CRYPTO_MICHAEL_MIC=m
@@ -668,6 +678,7 @@ CONFIG_CRYPTO_SHA512=m
 CONFIG_CRYPTO_SHA3=m
 CONFIG_CRYPTO_TGR192=m
 CONFIG_CRYPTO_WP512=m
+CONFIG_CRYPTO_AES_TI=m
 CONFIG_CRYPTO_ANUBIS=m
 CONFIG_CRYPTO_BLOWFISH=m
 CONFIG_CRYPTO_CAMELLIA=m
@@ -692,4 +703,5 @@ CONFIG_CRYPTO_USER_API_SKCIPHER=m
 CONFIG_CRYPTO_USER_API_RNG=m
 CONFIG_CRYPTO_USER_API_AEAD=m
 # CONFIG_CRYPTO_HW is not set
+CONFIG_CRC32_SELFTEST=m
 CONFIG_XZ_DEC_TEST=m

arch/m68k/configs/mvme147_defconfig

@@ -25,6 +25,7 @@ CONFIG_UNIXWARE_DISKLABEL=y
 CONFIG_SUN_PARTITION=y
 # CONFIG_EFI_PARTITION is not set
 CONFIG_IOSCHED_DEADLINE=m
+CONFIG_MQ_IOSCHED_DEADLINE=m
 CONFIG_KEXEC=y
 CONFIG_BOOTINFO_PROC=y
 CONFIG_M68030=y
@@ -55,6 +56,7 @@ CONFIG_NET_IPVTI=m
 CONFIG_NET_FOU_IP_TUNNELS=y
 CONFIG_INET_AH=m
 CONFIG_INET_ESP=m
+CONFIG_INET_ESP_OFFLOAD=m
 CONFIG_INET_IPCOMP=m
 CONFIG_INET_XFRM_MODE_TRANSPORT=m
 CONFIG_INET_XFRM_MODE_TUNNEL=m
@@ -66,6 +68,7 @@ CONFIG_IPV6=m
 CONFIG_IPV6_ROUTER_PREF=y
 CONFIG_INET6_AH=m
 CONFIG_INET6_ESP=m
+CONFIG_INET6_ESP_OFFLOAD=m
 CONFIG_INET6_IPCOMP=m
 CONFIG_IPV6_ILA=m
 CONFIG_IPV6_VTI=m
@@ -96,6 +99,7 @@ CONFIG_NFT_NUMGEN=m
 CONFIG_NFT_CT=m
 CONFIG_NFT_SET_RBTREE=m
 CONFIG_NFT_SET_HASH=m
+CONFIG_NFT_SET_BITMAP=m
 CONFIG_NFT_COUNTER=m
 CONFIG_NFT_LOG=m
 CONFIG_NFT_LIMIT=m
@@ -293,6 +297,8 @@ CONFIG_MPLS_IPTUNNEL=m
 CONFIG_NET_L3_MASTER_DEV=y
 CONFIG_AF_KCM=m
 # CONFIG_WIRELESS is not set
+CONFIG_PSAMPLE=m
+CONFIG_NET_IFE=m
 CONFIG_NET_DEVLINK=m
 # CONFIG_UEVENT_HELPER is not set
 CONFIG_DEVTMPFS=y
@@ -351,6 +357,7 @@ CONFIG_NET_TEAM_MODE_LOADBALANCE=m
 CONFIG_MACVLAN=m
 CONFIG_MACVTAP=m
 CONFIG_IPVLAN=m
+CONFIG_IPVTAP=m
 CONFIG_VXLAN=m
 CONFIG_GENEVE=m
 CONFIG_GTP=m
@@ -361,6 +368,7 @@ CONFIG_VETH=m
 # CONFIG_NET_VENDOR_ALACRITECH is not set
 # CONFIG_NET_VENDOR_AMAZON is not set
 CONFIG_MVME147_NET=y
+# CONFIG_NET_VENDOR_AQUANTIA is not set
 # CONFIG_NET_VENDOR_ARC is not set
 # CONFIG_NET_CADENCE is not set
 # CONFIG_NET_VENDOR_BROADCOM is not set
@@ -377,7 +385,6 @@ CONFIG_MVME147_NET=y
 # CONFIG_NET_VENDOR_SEEQ is not set
 # CONFIG_NET_VENDOR_SOLARFLARE is not set
 # CONFIG_NET_VENDOR_STMICRO is not set
-# CONFIG_NET_VENDOR_SYNOPSYS is not set
 # CONFIG_NET_VENDOR_VIA is not set
 # CONFIG_NET_VENDOR_WIZNET is not set
 CONFIG_PPP=m
@@ -515,6 +522,8 @@ CONFIG_NLS_MAC_TURKISH=m
 CONFIG_DLM=m
 # CONFIG_SECTION_MISMATCH_WARN_ONLY is not set
 CONFIG_MAGIC_SYSRQ=y
+CONFIG_WW_MUTEX_SELFTEST=m
+CONFIG_ATOMIC64_SELFTEST=m
 CONFIG_ASYNC_RAID6_TEST=m
 CONFIG_TEST_HEXDUMP=m
 CONFIG_TEST_STRING_HELPERS=m
@@ -545,6 +554,7 @@ CONFIG_CRYPTO_CHACHA20POLY1305=m
 CONFIG_CRYPTO_LRW=m
 CONFIG_CRYPTO_PCBC=m
 CONFIG_CRYPTO_KEYWRAP=m
+CONFIG_CRYPTO_CMAC=m
 CONFIG_CRYPTO_XCBC=m
 CONFIG_CRYPTO_VMAC=m
 CONFIG_CRYPTO_MICHAEL_MIC=m
@@ -556,6 +566,7 @@ CONFIG_CRYPTO_SHA512=m
 CONFIG_CRYPTO_SHA3=m
 CONFIG_CRYPTO_TGR192=m
 CONFIG_CRYPTO_WP512=m
+CONFIG_CRYPTO_AES_TI=m
 CONFIG_CRYPTO_ANUBIS=m
 CONFIG_CRYPTO_BLOWFISH=m
 CONFIG_CRYPTO_CAMELLIA=m
@@ -580,4 +591,5 @@ CONFIG_CRYPTO_USER_API_SKCIPHER=m
 CONFIG_CRYPTO_USER_API_RNG=m
 CONFIG_CRYPTO_USER_API_AEAD=m
 # CONFIG_CRYPTO_HW is not set
+CONFIG_CRC32_SELFTEST=m
 CONFIG_XZ_DEC_TEST=m

arch/m68k/configs/mvme16x_defconfig

@@ -25,6 +25,7 @@ CONFIG_UNIXWARE_DISKLABEL=y
 CONFIG_SUN_PARTITION=y
 # CONFIG_EFI_PARTITION is not set
 CONFIG_IOSCHED_DEADLINE=m
+CONFIG_MQ_IOSCHED_DEADLINE=m
 CONFIG_KEXEC=y
 CONFIG_BOOTINFO_PROC=y
 CONFIG_M68040=y
@@ -56,6 +57,7 @@ CONFIG_NET_IPVTI=m
 CONFIG_NET_FOU_IP_TUNNELS=y
 CONFIG_INET_AH=m
 CONFIG_INET_ESP=m
+CONFIG_INET_ESP_OFFLOAD=m
 CONFIG_INET_IPCOMP=m
 CONFIG_INET_XFRM_MODE_TRANSPORT=m
 CONFIG_INET_XFRM_MODE_TUNNEL=m
@@ -67,6 +69,7 @@ CONFIG_IPV6=m
 CONFIG_IPV6_ROUTER_PREF=y
 CONFIG_INET6_AH=m
 CONFIG_INET6_ESP=m
+CONFIG_INET6_ESP_OFFLOAD=m
 CONFIG_INET6_IPCOMP=m
 CONFIG_IPV6_ILA=m
 CONFIG_IPV6_VTI=m
@@ -97,6 +100,7 @@ CONFIG_NFT_NUMGEN=m
 CONFIG_NFT_CT=m
 CONFIG_NFT_SET_RBTREE=m
 CONFIG_NFT_SET_HASH=m
+CONFIG_NFT_SET_BITMAP=m
 CONFIG_NFT_COUNTER=m
 CONFIG_NFT_LOG=m
 CONFIG_NFT_LIMIT=m
@@ -294,6 +298,8 @@ CONFIG_MPLS_IPTUNNEL=m
 CONFIG_NET_L3_MASTER_DEV=y
 CONFIG_AF_KCM=m
 # CONFIG_WIRELESS is not set
+CONFIG_PSAMPLE=m
+CONFIG_NET_IFE=m
 CONFIG_NET_DEVLINK=m
 # CONFIG_UEVENT_HELPER is not set
 CONFIG_DEVTMPFS=y
@@ -352,6 +358,7 @@ CONFIG_NET_TEAM_MODE_LOADBALANCE=m
 CONFIG_MACVLAN=m
 CONFIG_MACVTAP=m
 CONFIG_IPVLAN=m
+CONFIG_IPVTAP=m
 CONFIG_VXLAN=m
 CONFIG_GENEVE=m
 CONFIG_GTP=m
@@ -361,6 +368,7 @@ CONFIG_NETCONSOLE_DYNAMIC=y
 CONFIG_VETH=m
 # CONFIG_NET_VENDOR_ALACRITECH is not set
 # CONFIG_NET_VENDOR_AMAZON is not set
+# CONFIG_NET_VENDOR_AQUANTIA is not set
 # CONFIG_NET_VENDOR_ARC is not set
 # CONFIG_NET_CADENCE is not set
 # CONFIG_NET_VENDOR_BROADCOM is not set
@@ -377,7 +385,6 @@ CONFIG_MVME16x_NET=y
 # CONFIG_NET_VENDOR_SEEQ is not set
 # CONFIG_NET_VENDOR_SOLARFLARE is not set
 # CONFIG_NET_VENDOR_STMICRO is not set
-# CONFIG_NET_VENDOR_SYNOPSYS is not set
 # CONFIG_NET_VENDOR_VIA is not set
 # CONFIG_NET_VENDOR_WIZNET is not set
 CONFIG_PPP=m
@@ -515,6 +522,8 @@ CONFIG_NLS_MAC_TURKISH=m
 CONFIG_DLM=m
 # CONFIG_SECTION_MISMATCH_WARN_ONLY is not set
 CONFIG_MAGIC_SYSRQ=y
+CONFIG_WW_MUTEX_SELFTEST=m
+CONFIG_ATOMIC64_SELFTEST=m
 CONFIG_ASYNC_RAID6_TEST=m
 CONFIG_TEST_HEXDUMP=m
 CONFIG_TEST_STRING_HELPERS=m
@@ -545,6 +554,7 @@ CONFIG_CRYPTO_CHACHA20POLY1305=m
 CONFIG_CRYPTO_LRW=m
 CONFIG_CRYPTO_PCBC=m
 CONFIG_CRYPTO_KEYWRAP=m
+CONFIG_CRYPTO_CMAC=m
 CONFIG_CRYPTO_XCBC=m
 CONFIG_CRYPTO_VMAC=m
 CONFIG_CRYPTO_MICHAEL_MIC=m
@@ -556,6 +566,7 @@ CONFIG_CRYPTO_SHA512=m
 CONFIG_CRYPTO_SHA3=m
 CONFIG_CRYPTO_TGR192=m
 CONFIG_CRYPTO_WP512=m
+CONFIG_CRYPTO_AES_TI=m
 CONFIG_CRYPTO_ANUBIS=m
 CONFIG_CRYPTO_BLOWFISH=m
 CONFIG_CRYPTO_CAMELLIA=m
@@ -580,4 +591,5 @@ CONFIG_CRYPTO_USER_API_SKCIPHER=m
 CONFIG_CRYPTO_USER_API_RNG=m
 CONFIG_CRYPTO_USER_API_AEAD=m
 # CONFIG_CRYPTO_HW is not set
+CONFIG_CRC32_SELFTEST=m
 CONFIG_XZ_DEC_TEST=m

arch/m68k/configs/q40_defconfig

@@ -26,6 +26,7 @@ CONFIG_SUN_PARTITION=y
 # CONFIG_EFI_PARTITION is not set
 CONFIG_SYSV68_PARTITION=y
 CONFIG_IOSCHED_DEADLINE=m
+CONFIG_MQ_IOSCHED_DEADLINE=m
 CONFIG_KEXEC=y
 CONFIG_BOOTINFO_PROC=y
 CONFIG_M68040=y
@@ -56,6 +57,7 @@ CONFIG_NET_IPVTI=m
 CONFIG_NET_FOU_IP_TUNNELS=y
 CONFIG_INET_AH=m
 CONFIG_INET_ESP=m
+CONFIG_INET_ESP_OFFLOAD=m
 CONFIG_INET_IPCOMP=m
 CONFIG_INET_XFRM_MODE_TRANSPORT=m
 CONFIG_INET_XFRM_MODE_TUNNEL=m
@@ -67,6 +69,7 @@ CONFIG_IPV6=m
 CONFIG_IPV6_ROUTER_PREF=y
 CONFIG_INET6_AH=m
 CONFIG_INET6_ESP=m
+CONFIG_INET6_ESP_OFFLOAD=m
 CONFIG_INET6_IPCOMP=m
 CONFIG_IPV6_ILA=m
 CONFIG_IPV6_VTI=m
@@ -97,6 +100,7 @@ CONFIG_NFT_NUMGEN=m
 CONFIG_NFT_CT=m
 CONFIG_NFT_SET_RBTREE=m
 CONFIG_NFT_SET_HASH=m
+CONFIG_NFT_SET_BITMAP=m
 CONFIG_NFT_COUNTER=m
 CONFIG_NFT_LOG=m
 CONFIG_NFT_LIMIT=m
@@ -294,6 +298,8 @@ CONFIG_MPLS_IPTUNNEL=m
 CONFIG_NET_L3_MASTER_DEV=y
 CONFIG_AF_KCM=m
 # CONFIG_WIRELESS is not set
+CONFIG_PSAMPLE=m
+CONFIG_NET_IFE=m
 CONFIG_NET_DEVLINK=m
 # CONFIG_UEVENT_HELPER is not set
 CONFIG_DEVTMPFS=y
@@ -358,6 +364,7 @@ CONFIG_NET_TEAM_MODE_LOADBALANCE=m
 CONFIG_MACVLAN=m
 CONFIG_MACVTAP=m
 CONFIG_IPVLAN=m
+CONFIG_IPVTAP=m
 CONFIG_VXLAN=m
 CONFIG_GENEVE=m
 CONFIG_GTP=m
@@ -369,6 +376,7 @@ CONFIG_VETH=m
 # CONFIG_NET_VENDOR_ALACRITECH is not set
 # CONFIG_NET_VENDOR_AMAZON is not set
 # CONFIG_NET_VENDOR_AMD is not set
+# CONFIG_NET_VENDOR_AQUANTIA is not set
 # CONFIG_NET_VENDOR_ARC is not set
 # CONFIG_NET_CADENCE is not set
 # CONFIG_NET_VENDOR_BROADCOM is not set
@@ -388,7 +396,6 @@ CONFIG_NE2000=y
 # CONFIG_NET_VENDOR_SOLARFLARE is not set
 # CONFIG_NET_VENDOR_SMSC is not set
 # CONFIG_NET_VENDOR_STMICRO is not set
-# CONFIG_NET_VENDOR_SYNOPSYS is not set
 # CONFIG_NET_VENDOR_VIA is not set
 # CONFIG_NET_VENDOR_WIZNET is not set
 CONFIG_PLIP=m
@@ -538,6 +545,8 @@ CONFIG_NLS_MAC_TURKISH=m
 CONFIG_DLM=m
 # CONFIG_SECTION_MISMATCH_WARN_ONLY is not set
 CONFIG_MAGIC_SYSRQ=y
+CONFIG_WW_MUTEX_SELFTEST=m
+CONFIG_ATOMIC64_SELFTEST=m
 CONFIG_ASYNC_RAID6_TEST=m
 CONFIG_TEST_HEXDUMP=m
 CONFIG_TEST_STRING_HELPERS=m
@@ -568,6 +577,7 @@ CONFIG_CRYPTO_CHACHA20POLY1305=m
 CONFIG_CRYPTO_LRW=m
 CONFIG_CRYPTO_PCBC=m
 CONFIG_CRYPTO_KEYWRAP=m
+CONFIG_CRYPTO_CMAC=m
 CONFIG_CRYPTO_XCBC=m
 CONFIG_CRYPTO_VMAC=m
 CONFIG_CRYPTO_MICHAEL_MIC=m
@@ -579,6 +589,7 @@ CONFIG_CRYPTO_SHA512=m
 CONFIG_CRYPTO_SHA3=m
 CONFIG_CRYPTO_TGR192=m
 CONFIG_CRYPTO_WP512=m
+CONFIG_CRYPTO_AES_TI=m
 CONFIG_CRYPTO_ANUBIS=m
 CONFIG_CRYPTO_BLOWFISH=m
 CONFIG_CRYPTO_CAMELLIA=m
@@ -603,4 +614,5 @@ CONFIG_CRYPTO_USER_API_SKCIPHER=m
 CONFIG_CRYPTO_USER_API_RNG=m
 CONFIG_CRYPTO_USER_API_AEAD=m
 # CONFIG_CRYPTO_HW is not set
+CONFIG_CRC32_SELFTEST=m
 CONFIG_XZ_DEC_TEST=m

arch/m68k/configs/sun3_defconfig

@@ -25,6 +25,7 @@ CONFIG_UNIXWARE_DISKLABEL=y
 # CONFIG_EFI_PARTITION is not set
 CONFIG_SYSV68_PARTITION=y
 CONFIG_IOSCHED_DEADLINE=m
+CONFIG_MQ_IOSCHED_DEADLINE=m
 CONFIG_KEXEC=y
 CONFIG_BOOTINFO_PROC=y
 CONFIG_SUN3=y
@@ -53,6 +54,7 @@ CONFIG_NET_IPVTI=m
 CONFIG_NET_FOU_IP_TUNNELS=y
 CONFIG_INET_AH=m
 CONFIG_INET_ESP=m
+CONFIG_INET_ESP_OFFLOAD=m
 CONFIG_INET_IPCOMP=m
 CONFIG_INET_XFRM_MODE_TRANSPORT=m
 CONFIG_INET_XFRM_MODE_TUNNEL=m
@@ -64,6 +66,7 @@ CONFIG_IPV6=m
 CONFIG_IPV6_ROUTER_PREF=y
 CONFIG_INET6_AH=m
 CONFIG_INET6_ESP=m
+CONFIG_INET6_ESP_OFFLOAD=m
 CONFIG_INET6_IPCOMP=m
 CONFIG_IPV6_ILA=m
 CONFIG_IPV6_VTI=m
@@ -94,6 +97,7 @@ CONFIG_NFT_NUMGEN=m
 CONFIG_NFT_CT=m
 CONFIG_NFT_SET_RBTREE=m
 CONFIG_NFT_SET_HASH=m
+CONFIG_NFT_SET_BITMAP=m
 CONFIG_NFT_COUNTER=m
 CONFIG_NFT_LOG=m
 CONFIG_NFT_LIMIT=m
@@ -291,6 +295,8 @@ CONFIG_MPLS_IPTUNNEL=m
 CONFIG_NET_L3_MASTER_DEV=y
 CONFIG_AF_KCM=m
 # CONFIG_WIRELESS is not set
+CONFIG_PSAMPLE=m
+CONFIG_NET_IFE=m
 CONFIG_NET_DEVLINK=m
 # CONFIG_UEVENT_HELPER is not set
 CONFIG_DEVTMPFS=y
@@ -349,6 +355,7 @@ CONFIG_NET_TEAM_MODE_LOADBALANCE=m
 CONFIG_MACVLAN=m
 CONFIG_MACVTAP=m
 CONFIG_IPVLAN=m
+CONFIG_IPVTAP=m
 CONFIG_VXLAN=m
 CONFIG_GENEVE=m
 CONFIG_GTP=m
@@ -359,6 +366,7 @@ CONFIG_VETH=m
 # CONFIG_NET_VENDOR_ALACRITECH is not set
 # CONFIG_NET_VENDOR_AMAZON is not set
 CONFIG_SUN3LANCE=y
+# CONFIG_NET_VENDOR_AQUANTIA is not set
 # CONFIG_NET_VENDOR_ARC is not set
 # CONFIG_NET_CADENCE is not set
 # CONFIG_NET_VENDOR_EZCHIP is not set
@@ -375,7 +383,6 @@ CONFIG_SUN3_82586=y
 # CONFIG_NET_VENDOR_SOLARFLARE is not set
 # CONFIG_NET_VENDOR_STMICRO is not set
 # CONFIG_NET_VENDOR_SUN is not set
-# CONFIG_NET_VENDOR_SYNOPSYS is not set
 # CONFIG_NET_VENDOR_VIA is not set
 # CONFIG_NET_VENDOR_WIZNET is not set
 CONFIG_PPP=m
@@ -517,6 +524,8 @@ CONFIG_NLS_MAC_TURKISH=m
 CONFIG_DLM=m
 # CONFIG_SECTION_MISMATCH_WARN_ONLY is not set
 CONFIG_MAGIC_SYSRQ=y
+CONFIG_WW_MUTEX_SELFTEST=m
+CONFIG_ATOMIC64_SELFTEST=m
 CONFIG_ASYNC_RAID6_TEST=m
 CONFIG_TEST_HEXDUMP=m
 CONFIG_TEST_STRING_HELPERS=m
@@ -546,6 +555,7 @@ CONFIG_CRYPTO_CHACHA20POLY1305=m
 CONFIG_CRYPTO_LRW=m
 CONFIG_CRYPTO_PCBC=m
 CONFIG_CRYPTO_KEYWRAP=m
+CONFIG_CRYPTO_CMAC=m
 CONFIG_CRYPTO_XCBC=m
 CONFIG_CRYPTO_VMAC=m
 CONFIG_CRYPTO_MICHAEL_MIC=m
@@ -557,6 +567,7 @@ CONFIG_CRYPTO_SHA512=m
 CONFIG_CRYPTO_SHA3=m
 CONFIG_CRYPTO_TGR192=m
 CONFIG_CRYPTO_WP512=m
+CONFIG_CRYPTO_AES_TI=m
 CONFIG_CRYPTO_ANUBIS=m
 CONFIG_CRYPTO_BLOWFISH=m
 CONFIG_CRYPTO_CAMELLIA=m
@@ -581,4 +592,5 @@ CONFIG_CRYPTO_USER_API_SKCIPHER=m
 CONFIG_CRYPTO_USER_API_RNG=m
 CONFIG_CRYPTO_USER_API_AEAD=m
 # CONFIG_CRYPTO_HW is not set
+CONFIG_CRC32_SELFTEST=m
 CONFIG_XZ_DEC_TEST=m

arch/m68k/configs/sun3x_defconfig

@@ -25,6 +25,7 @@ CONFIG_UNIXWARE_DISKLABEL=y
 # CONFIG_EFI_PARTITION is not set
 CONFIG_SYSV68_PARTITION=y
 CONFIG_IOSCHED_DEADLINE=m
+CONFIG_MQ_IOSCHED_DEADLINE=m
 CONFIG_KEXEC=y
 CONFIG_BOOTINFO_PROC=y
 CONFIG_SUN3X=y
@@ -53,6 +54,7 @@ CONFIG_NET_IPVTI=m
 CONFIG_NET_FOU_IP_TUNNELS=y
 CONFIG_INET_AH=m
 CONFIG_INET_ESP=m
+CONFIG_INET_ESP_OFFLOAD=m
 CONFIG_INET_IPCOMP=m
 CONFIG_INET_XFRM_MODE_TRANSPORT=m
 CONFIG_INET_XFRM_MODE_TUNNEL=m
@@ -64,6 +66,7 @@ CONFIG_IPV6=m
 CONFIG_IPV6_ROUTER_PREF=y
 CONFIG_INET6_AH=m
 CONFIG_INET6_ESP=m
+CONFIG_INET6_ESP_OFFLOAD=m
 CONFIG_INET6_IPCOMP=m
 CONFIG_IPV6_ILA=m
 CONFIG_IPV6_VTI=m
@@ -94,6 +97,7 @@ CONFIG_NFT_NUMGEN=m
 CONFIG_NFT_CT=m
 CONFIG_NFT_SET_RBTREE=m
 CONFIG_NFT_SET_HASH=m
+CONFIG_NFT_SET_BITMAP=m
 CONFIG_NFT_COUNTER=m
 CONFIG_NFT_LOG=m
 CONFIG_NFT_LIMIT=m
@@ -291,6 +295,8 @@ CONFIG_MPLS_IPTUNNEL=m
 CONFIG_NET_L3_MASTER_DEV=y
 CONFIG_AF_KCM=m
 # CONFIG_WIRELESS is not set
+CONFIG_PSAMPLE=m
+CONFIG_NET_IFE=m
 CONFIG_NET_DEVLINK=m
 # CONFIG_UEVENT_HELPER is not set
 CONFIG_DEVTMPFS=y
@@ -349,6 +355,7 @@ CONFIG_NET_TEAM_MODE_LOADBALANCE=m
 CONFIG_MACVLAN=m
 CONFIG_MACVTAP=m
 CONFIG_IPVLAN=m
+CONFIG_IPVTAP=m
 CONFIG_VXLAN=m
 CONFIG_GENEVE=m
 CONFIG_GTP=m
@@ -359,6 +366,7 @@ CONFIG_VETH=m
 # CONFIG_NET_VENDOR_ALACRITECH is not set
 # CONFIG_NET_VENDOR_AMAZON is not set
 CONFIG_SUN3LANCE=y
+# CONFIG_NET_VENDOR_AQUANTIA is not set
 # CONFIG_NET_VENDOR_ARC is not set
 # CONFIG_NET_CADENCE is not set
 # CONFIG_NET_VENDOR_BROADCOM is not set
@@ -375,7 +383,6 @@ CONFIG_SUN3LANCE=y
 # CONFIG_NET_VENDOR_SEEQ is not set
 # CONFIG_NET_VENDOR_SOLARFLARE is not set
 # CONFIG_NET_VENDOR_STMICRO is not set
-# CONFIG_NET_VENDOR_SYNOPSYS is not set
 # CONFIG_NET_VENDOR_VIA is not set
 # CONFIG_NET_VENDOR_WIZNET is not set
 CONFIG_PPP=m
@@ -517,6 +524,8 @@ CONFIG_NLS_MAC_TURKISH=m
 CONFIG_DLM=m
 # CONFIG_SECTION_MISMATCH_WARN_ONLY is not set
 CONFIG_MAGIC_SYSRQ=y
+CONFIG_WW_MUTEX_SELFTEST=m
+CONFIG_ATOMIC64_SELFTEST=m
 CONFIG_ASYNC_RAID6_TEST=m
 CONFIG_TEST_HEXDUMP=m
 CONFIG_TEST_STRING_HELPERS=m
@@ -547,6 +556,7 @@ CONFIG_CRYPTO_CHACHA20POLY1305=m
 CONFIG_CRYPTO_LRW=m
 CONFIG_CRYPTO_PCBC=m
 CONFIG_CRYPTO_KEYWRAP=m
+CONFIG_CRYPTO_CMAC=m
 CONFIG_CRYPTO_XCBC=m
 CONFIG_CRYPTO_VMAC=m
 CONFIG_CRYPTO_MICHAEL_MIC=m
@@ -558,6 +568,7 @@ CONFIG_CRYPTO_SHA512=m
 CONFIG_CRYPTO_SHA3=m
 CONFIG_CRYPTO_TGR192=m
 CONFIG_CRYPTO_WP512=m
+CONFIG_CRYPTO_AES_TI=m
 CONFIG_CRYPTO_ANUBIS=m
 CONFIG_CRYPTO_BLOWFISH=m
 CONFIG_CRYPTO_CAMELLIA=m
@@ -582,4 +593,5 @@ CONFIG_CRYPTO_USER_API_SKCIPHER=m
 CONFIG_CRYPTO_USER_API_RNG=m
 CONFIG_CRYPTO_USER_API_AEAD=m
 # CONFIG_CRYPTO_HW is not set
+CONFIG_CRC32_SELFTEST=m
 CONFIG_XZ_DEC_TEST=m

arch/m68k/include/asm/bitops.h

@@ -148,7 +148,7 @@ static inline void bfchg_mem_change_bit(int nr, volatile unsigned long *vaddr)
 #define __change_bit(nr, vaddr)	change_bit(nr, vaddr)
 
 
-static inline int test_bit(int nr, const unsigned long *vaddr)
+static inline int test_bit(int nr, const volatile unsigned long *vaddr)
 {
 	return (vaddr[nr >> 5] & (1UL << (nr & 31))) != 0;
 }

arch/m68k/include/asm/unistd.h

@@ -4,7 +4,7 @@
 #include <uapi/asm/unistd.h>
 
 
-#define NR_syscalls		379
+#define NR_syscalls		380
 
 #define __ARCH_WANT_OLD_READDIR
 #define __ARCH_WANT_OLD_STAT

arch/m68k/include/uapi/asm/unistd.h

@@ -384,5 +384,6 @@
 #define __NR_copy_file_range	376
 #define __NR_preadv2		377
 #define __NR_pwritev2		378
+#define __NR_statx		379
 
 #endif /* _UAPI_ASM_M68K_UNISTD_H_ */

arch/m68k/kernel/syscalltable.S

@@ -399,3 +399,4 @@ ENTRY(sys_call_table)
 	.long sys_copy_file_range
 	.long sys_preadv2
 	.long sys_pwritev2
+	.long sys_statx

arch/metag/kernel/ptrace.c

@@ -26,6 +26,16 @@
  * user_regset definitions.
  */
 
+static unsigned long user_txstatus(const struct pt_regs *regs)
+{
+	unsigned long data = (unsigned long)regs->ctx.Flags;
+
+	if (regs->ctx.SaveMask & TBICTX_CBUF_BIT)
+		data |= USER_GP_REGS_STATUS_CATCH_BIT;
+
+	return data;
+}
+
 int metag_gp_regs_copyout(const struct pt_regs *regs,
 			  unsigned int pos, unsigned int count,
 			  void *kbuf, void __user *ubuf)
@@ -64,9 +74,7 @@ int metag_gp_regs_copyout(const struct pt_regs *regs,
 	if (ret)
 		goto out;
 	/* TXSTATUS */
-	data = (unsigned long)regs->ctx.Flags;
-	if (regs->ctx.SaveMask & TBICTX_CBUF_BIT)
-		data |= USER_GP_REGS_STATUS_CATCH_BIT;
+	data = user_txstatus(regs);
 	ret = user_regset_copyout(&pos, &count, &kbuf, &ubuf,
 				  &data, 4*25, 4*26);
 	if (ret)
@@ -121,6 +129,7 @@ int metag_gp_regs_copyin(struct pt_regs *regs,
 	if (ret)
 		goto out;
 	/* TXSTATUS */
+	data = user_txstatus(regs);
 	ret = user_regset_copyin(&pos, &count, &kbuf, &ubuf,
 				 &data, 4*25, 4*26);
 	if (ret)
@@ -246,6 +255,8 @@ int metag_rp_state_copyin(struct pt_regs *regs,
 	unsigned long long *ptr;
 	int ret, i;
 
+	if (count < 4*13)
+		return -EINVAL;
 	/* Read the entire pipeline before making any changes */
 	ret = user_regset_copyin(&pos, &count, &kbuf, &ubuf,
 				 &rp, 0, 4*13);
@@ -305,7 +316,7 @@ static int metag_tls_set(struct task_struct *target,
 			const void *kbuf, const void __user *ubuf)
 {
 	int ret;
-	void __user *tls;
+	void __user *tls = target->thread.tls_ptr;
 
 	ret = user_regset_copyin(&pos, &count, &kbuf, &ubuf, &tls, 0, -1);
 	if (ret)

arch/mips/kernel/ptrace.c

@@ -456,7 +456,8 @@ static int fpr_set(struct task_struct *target,
 					  &target->thread.fpu,
 					  0, sizeof(elf_fpregset_t));
 
-	for (i = 0; i < NUM_FPU_REGS; i++) {
+	BUILD_BUG_ON(sizeof(fpr_val) != sizeof(elf_fpreg_t));
+	for (i = 0; i < NUM_FPU_REGS && count >= sizeof(elf_fpreg_t); i++) {
 		err = user_regset_copyin(&pos, &count, &kbuf, &ubuf,
 					 &fpr_val, i * sizeof(elf_fpreg_t),
 					 (i + 1) * sizeof(elf_fpreg_t));

arch/openrisc/include/asm/cmpxchg.h

@@ -77,7 +77,11 @@ static inline unsigned long __xchg(unsigned long val, volatile void *ptr,
 	return val;
 }
 
-#define xchg(ptr, with) \
-	((typeof(*(ptr)))__xchg((unsigned long)(with), (ptr), sizeof(*(ptr))))
+#define xchg(ptr, with) 						\
+	({								\
+		(__typeof__(*(ptr))) __xchg((unsigned long)(with),	\
+					    (ptr),			\
+					    sizeof(*(ptr)));		\
+	})
 
 #endif /* __ASM_OPENRISC_CMPXCHG_H */

arch/openrisc/include/asm/uaccess.h

@@ -211,7 +211,7 @@ do {									\
 	case 1: __get_user_asm(x, ptr, retval, "l.lbz"); break;		\
 	case 2: __get_user_asm(x, ptr, retval, "l.lhz"); break;		\
 	case 4: __get_user_asm(x, ptr, retval, "l.lwz"); break;		\
-	case 8: __get_user_asm2(x, ptr, retval);			\
+	case 8: __get_user_asm2(x, ptr, retval); break;			\
 	default: (x) = __get_user_bad();				\
 	}								\
 } while (0)

arch/openrisc/kernel/or32_ksyms.c

@@ -30,6 +30,7 @@
 #include <asm/hardirq.h>
 #include <asm/delay.h>
 #include <asm/pgalloc.h>
+#include <asm/pgtable.h>
 
 #define DECLARE_EXPORT(name) extern void name(void); EXPORT_SYMBOL(name)
 
@@ -42,6 +43,9 @@ DECLARE_EXPORT(__muldi3);
 DECLARE_EXPORT(__ashrdi3);
 DECLARE_EXPORT(__ashldi3);
 DECLARE_EXPORT(__lshrdi3);
+DECLARE_EXPORT(__ucmpdi2);
 
+EXPORT_SYMBOL(empty_zero_page);
 EXPORT_SYMBOL(__copy_tofrom_user);
+EXPORT_SYMBOL(__clear_user);
 EXPORT_SYMBOL(memset);

arch/openrisc/kernel/process.c

@@ -90,6 +90,7 @@ void arch_cpu_idle(void)
 }
 
 void (*pm_power_off) (void) = machine_power_off;
+EXPORT_SYMBOL(pm_power_off);
 
 /*
  * When a process does an "exec", machine state like FPU and debug

arch/parisc/include/asm/cacheflush.h

@@ -43,28 +43,9 @@ static inline void flush_kernel_dcache_page(struct page *page)
 
 #define flush_kernel_dcache_range(start,size) \
 	flush_kernel_dcache_range_asm((start), (start)+(size));
-/* vmap range flushes and invalidates.  Architecturally, we don't need
- * the invalidate, because the CPU should refuse to speculate once an
- * area has been flushed, so invalidate is left empty */
-static inline void flush_kernel_vmap_range(void *vaddr, int size)
-{
-	unsigned long start = (unsigned long)vaddr;
-
-	flush_kernel_dcache_range_asm(start, start + size);
-}
-static inline void invalidate_kernel_vmap_range(void *vaddr, int size)
-{
-	unsigned long start = (unsigned long)vaddr;
-	void *cursor = vaddr;
 
-	for ( ; cursor < vaddr + size; cursor += PAGE_SIZE) {
-		struct page *page = vmalloc_to_page(cursor);
-
-		if (test_and_clear_bit(PG_dcache_dirty, &page->flags))
-			flush_kernel_dcache_page(page);
-	}
-	flush_kernel_dcache_range_asm(start, start + size);
-}
+void flush_kernel_vmap_range(void *vaddr, int size);
+void invalidate_kernel_vmap_range(void *vaddr, int size);
 
 #define flush_cache_vmap(start, end)		flush_cache_all()
 #define flush_cache_vunmap(start, end)		flush_cache_all()

arch/parisc/include/asm/uaccess.h

@@ -32,7 +32,8 @@
  * that put_user is the same as __put_user, etc.
  */
 
-#define access_ok(type, uaddr, size) (1)
+#define access_ok(type, uaddr, size)	\
+	( (uaddr) == (uaddr) )
 
 #define put_user __put_user
 #define get_user __get_user
@@ -63,6 +64,15 @@ struct exception_table_entry {
 	".word (" #fault_addr " - .), (" #except_addr " - .)\n\t" \
 	".previous\n"
 
+/*
+ * ASM_EXCEPTIONTABLE_ENTRY_EFAULT() creates a special exception table entry
+ * (with lowest bit set) for which the fault handler in fixup_exception() will
+ * load -EFAULT into %r8 for a read or write fault, and zeroes the target
+ * register in case of a read fault in get_user().
+ */
+#define ASM_EXCEPTIONTABLE_ENTRY_EFAULT( fault_addr, except_addr )\
+	ASM_EXCEPTIONTABLE_ENTRY( fault_addr, except_addr + 1)
+
 /*
  * The page fault handler stores, in a per-cpu area, the following information
  * if a fixup routine is available.
@@ -90,7 +100,7 @@ struct exception_data {
 #define __get_user(x, ptr)                               \
 ({                                                       \
 	register long __gu_err __asm__ ("r8") = 0;       \
-	register long __gu_val __asm__ ("r9") = 0;       \
+	register long __gu_val;				 \
 							 \
 	load_sr2();					 \
 	switch (sizeof(*(ptr))) {			 \
@@ -106,22 +116,23 @@ struct exception_data {
 })
 
 #define __get_user_asm(ldx, ptr)                        \
-	__asm__("\n1:\t" ldx "\t0(%%sr2,%2),%0\n\t"	\
-		ASM_EXCEPTIONTABLE_ENTRY(1b, fixup_get_user_skip_1)\
+	__asm__("1: " ldx " 0(%%sr2,%2),%0\n"		\
+		"9:\n"					\
+		ASM_EXCEPTIONTABLE_ENTRY_EFAULT(1b, 9b)	\
 		: "=r"(__gu_val), "=r"(__gu_err)        \
-		: "r"(ptr), "1"(__gu_err)		\
-		: "r1");
+		: "r"(ptr), "1"(__gu_err));
 
 #if !defined(CONFIG_64BIT)
 
 #define __get_user_asm64(ptr) 				\
-	__asm__("\n1:\tldw 0(%%sr2,%2),%0"		\
-		"\n2:\tldw 4(%%sr2,%2),%R0\n\t"		\
-		ASM_EXCEPTIONTABLE_ENTRY(1b, fixup_get_user_skip_2)\
-		ASM_EXCEPTIONTABLE_ENTRY(2b, fixup_get_user_skip_1)\
+	__asm__("   copy %%r0,%R0\n"			\
+		"1: ldw 0(%%sr2,%2),%0\n"		\
+		"2: ldw 4(%%sr2,%2),%R0\n"		\
+		"9:\n"					\
+		ASM_EXCEPTIONTABLE_ENTRY_EFAULT(1b, 9b)	\
+		ASM_EXCEPTIONTABLE_ENTRY_EFAULT(2b, 9b)	\
 		: "=r"(__gu_val), "=r"(__gu_err)	\
-		: "r"(ptr), "1"(__gu_err)		\
-		: "r1");
+		: "r"(ptr), "1"(__gu_err));
 
 #endif /* !defined(CONFIG_64BIT) */
 
@@ -147,32 +158,31 @@ struct exception_data {
  * The "__put_user/kernel_asm()" macros tell gcc they read from memory
  * instead of writing. This is because they do not write to any memory
  * gcc knows about, so there are no aliasing issues. These macros must
- * also be aware that "fixup_put_user_skip_[12]" are executed in the
- * context of the fault, and any registers used there must be listed
- * as clobbers. In this case only "r1" is used by the current routines.
- * r8/r9 are already listed as err/val.
+ * also be aware that fixups are executed in the context of the fault,
+ * and any registers used there must be listed as clobbers.
+ * r8 is already listed as err.
  */
 
 #define __put_user_asm(stx, x, ptr)                         \
 	__asm__ __volatile__ (                              \
-		"\n1:\t" stx "\t%2,0(%%sr2,%1)\n\t"	    \
-		ASM_EXCEPTIONTABLE_ENTRY(1b, fixup_put_user_skip_1)\
+		"1: " stx " %2,0(%%sr2,%1)\n"		    \
+		"9:\n"					    \
+		ASM_EXCEPTIONTABLE_ENTRY_EFAULT(1b, 9b)	    \
 		: "=r"(__pu_err)                            \
-		: "r"(ptr), "r"(x), "0"(__pu_err)	    \
-		: "r1")
+		: "r"(ptr), "r"(x), "0"(__pu_err))
 
 
 #if !defined(CONFIG_64BIT)
 
 #define __put_user_asm64(__val, ptr) do {	    	    \
 	__asm__ __volatile__ (				    \
-		"\n1:\tstw %2,0(%%sr2,%1)"		    \
-		"\n2:\tstw %R2,4(%%sr2,%1)\n\t"		    \
-		ASM_EXCEPTIONTABLE_ENTRY(1b, fixup_put_user_skip_2)\
-		ASM_EXCEPTIONTABLE_ENTRY(2b, fixup_put_user_skip_1)\
+		"1: stw %2,0(%%sr2,%1)\n"		    \
+		"2: stw %R2,4(%%sr2,%1)\n"		    \
+		"9:\n"					    \
+		ASM_EXCEPTIONTABLE_ENTRY_EFAULT(1b, 9b)	    \
+		ASM_EXCEPTIONTABLE_ENTRY_EFAULT(2b, 9b)	    \
 		: "=r"(__pu_err)                            \
-		: "r"(ptr), "r"(__val), "0"(__pu_err) \
-		: "r1");				    \
+		: "r"(ptr), "r"(__val), "0"(__pu_err));	    \
 } while (0)
 
 #endif /* !defined(CONFIG_64BIT) */

arch/parisc/include/uapi/asm/unistd.h

@@ -362,8 +362,9 @@
 #define __NR_copy_file_range	(__NR_Linux + 346)
 #define __NR_preadv2		(__NR_Linux + 347)
 #define __NR_pwritev2		(__NR_Linux + 348)
+#define __NR_statx		(__NR_Linux + 349)
 
-#define __NR_Linux_syscalls	(__NR_pwritev2 + 1)
+#define __NR_Linux_syscalls	(__NR_statx + 1)
 
 
 #define __IGNORE_select		/* newselect */

arch/parisc/kernel/cache.c

@@ -616,3 +616,25 @@ flush_cache_page(struct vm_area_struct *vma, unsigned long vmaddr, unsigned long
 		__flush_cache_page(vma, vmaddr, PFN_PHYS(pfn));
 	}
 }
+
+void flush_kernel_vmap_range(void *vaddr, int size)
+{
+	unsigned long start = (unsigned long)vaddr;
+
+	if ((unsigned long)size > parisc_cache_flush_threshold)
+		flush_data_cache();
+	else
+		flush_kernel_dcache_range_asm(start, start + size);
+}
+EXPORT_SYMBOL(flush_kernel_vmap_range);
+
+void invalidate_kernel_vmap_range(void *vaddr, int size)
+{
+	unsigned long start = (unsigned long)vaddr;
+
+	if ((unsigned long)size > parisc_cache_flush_threshold)
+		flush_data_cache();
+	else
+		flush_kernel_dcache_range_asm(start, start + size);
+}
+EXPORT_SYMBOL(invalidate_kernel_vmap_range);

arch/parisc/kernel/module.c

@@ -620,6 +620,10 @@ int apply_relocate_add(Elf_Shdr *sechdrs,
 			 */
 			*loc = fsel(val, addend); 
 			break;
+		case R_PARISC_SECREL32:
+			/* 32-bit section relative address. */
+			*loc = fsel(val, addend);
+			break;
 		case R_PARISC_DPREL21L:
 			/* left 21 bit of relative address */
 			val = lrsel(val - dp, addend);
@@ -807,6 +811,10 @@ int apply_relocate_add(Elf_Shdr *sechdrs,
 			 */
 			*loc = fsel(val, addend); 
 			break;
+		case R_PARISC_SECREL32:
+			/* 32-bit section relative address. */
+			*loc = fsel(val, addend);
+			break;
 		case R_PARISC_FPTR64:
 			/* 64-bit function address */
 			if(in_local(me, (void *)(val + addend))) {

arch/parisc/kernel/parisc_ksyms.c

@@ -47,16 +47,6 @@ EXPORT_SYMBOL(__cmpxchg_u64);
 EXPORT_SYMBOL(lclear_user);
 EXPORT_SYMBOL(lstrnlen_user);
 
-/* Global fixups - defined as int to avoid creation of function pointers */
-extern int fixup_get_user_skip_1;
-extern int fixup_get_user_skip_2;
-extern int fixup_put_user_skip_1;
-extern int fixup_put_user_skip_2;
-EXPORT_SYMBOL(fixup_get_user_skip_1);
-EXPORT_SYMBOL(fixup_get_user_skip_2);
-EXPORT_SYMBOL(fixup_put_user_skip_1);
-EXPORT_SYMBOL(fixup_put_user_skip_2);
-
 #ifndef CONFIG_64BIT
 /* Needed so insmod can set dp value */
 extern int $global$;

arch/parisc/kernel/perf.c

@@ -39,7 +39,7 @@
  *  the PDC INTRIGUE calls.  This is done to eliminate bugs introduced
  *  in various PDC revisions.  The code is much more maintainable
  *  and reliable this way vs having to debug on every version of PDC
- *  on every box. 
+ *  on every box.
  */
 
 #include <linux/capability.h>
@@ -195,8 +195,8 @@ static int perf_config(uint32_t *image_ptr);
 static int perf_release(struct inode *inode, struct file *file);
 static int perf_open(struct inode *inode, struct file *file);
 static ssize_t perf_read(struct file *file, char __user *buf, size_t cnt, loff_t *ppos);
-static ssize_t perf_write(struct file *file, const char __user *buf, size_t count, 
-	loff_t *ppos);
+static ssize_t perf_write(struct file *file, const char __user *buf,
+	size_t count, loff_t *ppos);
 static long perf_ioctl(struct file *file, unsigned int cmd, unsigned long arg);
 static void perf_start_counters(void);
 static int perf_stop_counters(uint32_t *raddr);
@@ -222,7 +222,7 @@ extern void perf_intrigue_disable_perf_counters (void);
 /*
  * configure:
  *
- * Configure the cpu with a given data image.  First turn off the counters, 
+ * Configure the cpu with a given data image.  First turn off the counters,
  * then download the image, then turn the counters back on.
  */
 static int perf_config(uint32_t *image_ptr)
@@ -234,7 +234,7 @@ static int perf_config(uint32_t *image_ptr)
 	error = perf_stop_counters(raddr);
 	if (error != 0) {
 		printk("perf_config: perf_stop_counters = %ld\n", error);
-		return -EINVAL; 
+		return -EINVAL;
 	}
 
 printk("Preparing to write image\n");
@@ -242,7 +242,7 @@ printk("Preparing to write image\n");
 	error = perf_write_image((uint64_t *)image_ptr);
 	if (error != 0) {
 		printk("perf_config: DOWNLOAD = %ld\n", error);
-		return -EINVAL; 
+		return -EINVAL;
 	}
 
 printk("Preparing to start counters\n");
@@ -254,7 +254,7 @@ printk("Preparing to start counters\n");
 }
 
 /*
- * Open the device and initialize all of its memory.  The device is only 
+ * Open the device and initialize all of its memory.  The device is only
  * opened once, but can be "queried" by multiple processes that know its
  * file descriptor.
  */
@@ -298,19 +298,19 @@ static ssize_t perf_read(struct file *file, char __user *buf, size_t cnt, loff_t
  * called on the processor that the download should happen
  * on.
  */
-static ssize_t perf_write(struct file *file, const char __user *buf, size_t count, 
-	loff_t *ppos)
+static ssize_t perf_write(struct file *file, const char __user *buf,
+	size_t count, loff_t *ppos)
 {
 	size_t image_size;
 	uint32_t image_type;
 	uint32_t interface_type;
 	uint32_t test;
 
-	if (perf_processor_interface == ONYX_INTF) 
+	if (perf_processor_interface == ONYX_INTF)
 		image_size = PCXU_IMAGE_SIZE;
-	else if (perf_processor_interface == CUDA_INTF) 
+	else if (perf_processor_interface == CUDA_INTF)
 		image_size = PCXW_IMAGE_SIZE;
-	else 
+	else
 		return -EFAULT;
 
 	if (!capable(CAP_SYS_ADMIN))
@@ -330,22 +330,22 @@ static ssize_t perf_write(struct file *file, const char __user *buf, size_t coun
 
 	/* First check the machine type is correct for
 	   the requested image */
-        if (((perf_processor_interface == CUDA_INTF) &&
-		       (interface_type != CUDA_INTF)) ||
-	    ((perf_processor_interface == ONYX_INTF) &&
-	               (interface_type != ONYX_INTF))) 
+	if (((perf_processor_interface == CUDA_INTF) &&
+			(interface_type != CUDA_INTF)) ||
+		((perf_processor_interface == ONYX_INTF) &&
+			(interface_type != ONYX_INTF)))
 		return -EINVAL;
 
 	/* Next check to make sure the requested image
 	   is valid */
-	if (((interface_type == CUDA_INTF) && 
+	if (((interface_type == CUDA_INTF) &&
 		       (test >= MAX_CUDA_IMAGES)) ||
-	    ((interface_type == ONYX_INTF) && 
-		       (test >= MAX_ONYX_IMAGES))) 
+	    ((interface_type == ONYX_INTF) &&
+		       (test >= MAX_ONYX_IMAGES)))
 		return -EINVAL;
 
 	/* Copy the image into the processor */
-	if (interface_type == CUDA_INTF) 
+	if (interface_type == CUDA_INTF)
 		return perf_config(cuda_images[test]);
 	else
 		return perf_config(onyx_images[test]);
@@ -359,7 +359,7 @@ static ssize_t perf_write(struct file *file, const char __user *buf, size_t coun
 static void perf_patch_images(void)
 {
 #if 0 /* FIXME!! */
-/* 
+/*
  * NOTE:  this routine is VERY specific to the current TLB image.
  * If the image is changed, this routine might also need to be changed.
  */
@@ -367,9 +367,9 @@ static void perf_patch_images(void)
 	extern void $i_dtlb_miss_2_0();
 	extern void PA2_0_iva();
 
-	/* 
+	/*
 	 * We can only use the lower 32-bits, the upper 32-bits should be 0
-	 * anyway given this is in the kernel 
+	 * anyway given this is in the kernel
 	 */
 	uint32_t itlb_addr  = (uint32_t)&($i_itlb_miss_2_0);
 	uint32_t dtlb_addr  = (uint32_t)&($i_dtlb_miss_2_0);
@@ -377,21 +377,21 @@ static void perf_patch_images(void)
 
 	if (perf_processor_interface == ONYX_INTF) {
 		/* clear last 2 bytes */
-		onyx_images[TLBMISS][15] &= 0xffffff00;  
+		onyx_images[TLBMISS][15] &= 0xffffff00;
 		/* set 2 bytes */
 		onyx_images[TLBMISS][15] |= (0x000000ff&((dtlb_addr) >> 24));
 		onyx_images[TLBMISS][16] = (dtlb_addr << 8)&0xffffff00;
 		onyx_images[TLBMISS][17] = itlb_addr;
 
 		/* clear last 2 bytes */
-		onyx_images[TLBHANDMISS][15] &= 0xffffff00;  
+		onyx_images[TLBHANDMISS][15] &= 0xffffff00;
 		/* set 2 bytes */
 		onyx_images[TLBHANDMISS][15] |= (0x000000ff&((dtlb_addr) >> 24));
 		onyx_images[TLBHANDMISS][16] = (dtlb_addr << 8)&0xffffff00;
 		onyx_images[TLBHANDMISS][17] = itlb_addr;
 
 		/* clear last 2 bytes */
-		onyx_images[BIG_CPI][15] &= 0xffffff00;  
+		onyx_images[BIG_CPI][15] &= 0xffffff00;
 		/* set 2 bytes */
 		onyx_images[BIG_CPI][15] |= (0x000000ff&((dtlb_addr) >> 24));
 		onyx_images[BIG_CPI][16] = (dtlb_addr << 8)&0xffffff00;
@@ -404,24 +404,24 @@ static void perf_patch_images(void)
 
 	} else if (perf_processor_interface == CUDA_INTF) {
 		/* Cuda interface */
-		cuda_images[TLBMISS][16] =  
+		cuda_images[TLBMISS][16] =
 			(cuda_images[TLBMISS][16]&0xffff0000) |
 			((dtlb_addr >> 8)&0x0000ffff);
-		cuda_images[TLBMISS][17] = 
+		cuda_images[TLBMISS][17] =
 			((dtlb_addr << 24)&0xff000000) | ((itlb_addr >> 16)&0x000000ff);
 		cuda_images[TLBMISS][18] = (itlb_addr << 16)&0xffff0000;
 
-		cuda_images[TLBHANDMISS][16] = 
+		cuda_images[TLBHANDMISS][16] =
 			(cuda_images[TLBHANDMISS][16]&0xffff0000) |
 			((dtlb_addr >> 8)&0x0000ffff);
-		cuda_images[TLBHANDMISS][17] = 
+		cuda_images[TLBHANDMISS][17] =
 			((dtlb_addr << 24)&0xff000000) | ((itlb_addr >> 16)&0x000000ff);
 		cuda_images[TLBHANDMISS][18] = (itlb_addr << 16)&0xffff0000;
 
-		cuda_images[BIG_CPI][16] = 
+		cuda_images[BIG_CPI][16] =
 			(cuda_images[BIG_CPI][16]&0xffff0000) |
 			((dtlb_addr >> 8)&0x0000ffff);
-		cuda_images[BIG_CPI][17] = 
+		cuda_images[BIG_CPI][17] =
 			((dtlb_addr << 24)&0xff000000) | ((itlb_addr >> 16)&0x000000ff);
 		cuda_images[BIG_CPI][18] = (itlb_addr << 16)&0xffff0000;
 	} else {
@@ -433,7 +433,7 @@ static void perf_patch_images(void)
 
 /*
  * ioctl routine
- * All routines effect the processor that they are executed on.  Thus you 
+ * All routines effect the processor that they are executed on.  Thus you
  * must be running on the processor that you wish to change.
  */
 
@@ -459,7 +459,7 @@ static long perf_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
 			}
 
 			/* copy out the Counters */
-			if (copy_to_user((void __user *)arg, raddr, 
+			if (copy_to_user((void __user *)arg, raddr,
 					sizeof (raddr)) != 0) {
 				error =  -EFAULT;
 				break;
@@ -487,7 +487,7 @@ static const struct file_operations perf_fops = {
 	.open = perf_open,
 	.release = perf_release
 };
-	
+
 static struct miscdevice perf_dev = {
 	MISC_DYNAMIC_MINOR,
 	PA_PERF_DEV,
@@ -595,7 +595,7 @@ static int perf_stop_counters(uint32_t *raddr)
 		/* OR sticky2 (bit 1496) to counter2 bit 32 */
 		tmp64 |= (userbuf[23] >> 8) & 0x0000000080000000;
 		raddr[2] = (uint32_t)tmp64;
-		
+
 		/* Counter3 is bits 1497 to 1528 */
 		tmp64 =  (userbuf[23] >> 7) & 0x00000000ffffffff;
 		/* OR sticky3 (bit 1529) to counter3 bit 32 */
@@ -617,7 +617,7 @@ static int perf_stop_counters(uint32_t *raddr)
 		userbuf[22] = 0;
 		userbuf[23] = 0;
 
-		/* 
+		/*
 		 * Write back the zeroed bytes + the image given
 		 * the read was destructive.
 		 */
@@ -625,13 +625,13 @@ static int perf_stop_counters(uint32_t *raddr)
 	} else {
 
 		/*
-		 * Read RDR-15 which contains the counters and sticky bits 
+		 * Read RDR-15 which contains the counters and sticky bits
 		 */
 		if (!perf_rdr_read_ubuf(15, userbuf)) {
 			return -13;
 		}
 
-		/* 
+		/*
 		 * Clear out the counters
 		 */
 		perf_rdr_clear(15);
@@ -644,7 +644,7 @@ static int perf_stop_counters(uint32_t *raddr)
 		raddr[2] = (uint32_t)((userbuf[1] >> 32) & 0x00000000ffffffffUL);
 		raddr[3] = (uint32_t)(userbuf[1] & 0x00000000ffffffffUL);
 	}
- 
+
 	return 0;
 }
 
@@ -682,7 +682,7 @@ static int perf_rdr_read_ubuf(uint32_t	rdr_num, uint64_t *buffer)
 	i = tentry->num_words;
 	while (i--) {
 		buffer[i] = 0;
-	}	
+	}
 
 	/* Check for bits an even number of 64 */
 	if ((xbits = width & 0x03f) != 0) {
@@ -808,18 +808,22 @@ static int perf_write_image(uint64_t *memaddr)
 	}
 
 	runway = ioremap_nocache(cpu_device->hpa.start, 4096);
+	if (!runway) {
+		pr_err("perf_write_image: ioremap failed!\n");
+		return -ENOMEM;
+	}
 
 	/* Merge intrigue bits into Runway STATUS 0 */
 	tmp64 = __raw_readq(runway + RUNWAY_STATUS) & 0xffecfffffffffffful;
-	__raw_writeq(tmp64 | (*memaddr++ & 0x0013000000000000ul), 
+	__raw_writeq(tmp64 | (*memaddr++ & 0x0013000000000000ul),
 		     runway + RUNWAY_STATUS);
-	
+
 	/* Write RUNWAY DEBUG registers */
 	for (i = 0; i < 8; i++) {
 		__raw_writeq(*memaddr++, runway + RUNWAY_DEBUG);
 	}
 
-	return 0; 
+	return 0;
 }
 
 /*
@@ -843,7 +847,7 @@ printk("perf_rdr_write\n");
 			perf_rdr_shift_out_U(rdr_num, buffer[i]);
 		} else {
 			perf_rdr_shift_out_W(rdr_num, buffer[i]);
-		}	
+		}
 	}
 printk("perf_rdr_write done\n");
 }

arch/parisc/kernel/process.c

@@ -142,6 +142,10 @@ void machine_power_off(void)
 
 	printk(KERN_EMERG "System shut down completed.\n"
 	       "Please power this system off now.");
+
+	/* prevent soft lockup/stalled CPU messages for endless loop. */
+	rcu_sysrq_start();
+	for (;;);
 }
 
 void (*pm_power_off)(void) = machine_power_off;

arch/parisc/kernel/syscall_table.S

@@ -444,6 +444,7 @@
 	ENTRY_SAME(copy_file_range)
 	ENTRY_COMP(preadv2)
 	ENTRY_COMP(pwritev2)
+	ENTRY_SAME(statx)
 
 
 .ifne (. - 90b) - (__NR_Linux_syscalls * (91b - 90b))

arch/parisc/lib/Makefile

@@ -2,7 +2,7 @@
 # Makefile for parisc-specific library files
 #
 
-lib-y	:= lusercopy.o bitops.o checksum.o io.o memset.o fixup.o memcpy.o \
+lib-y	:= lusercopy.o bitops.o checksum.o io.o memset.o memcpy.o \
 	   ucmpdi2.o delay.o
 
 obj-y	:= iomap.o

arch/parisc/lib/fixup.S

@@ -1,98 +0,0 @@
-/*
- * Linux/PA-RISC Project (http://www.parisc-linux.org/)
- *
- *  Copyright (C) 2004  Randolph Chung <tausq@debian.org>
- *
- *    This program is free software; you can redistribute it and/or modify
- *    it under the terms of the GNU General Public License as published by
- *    the Free Software Foundation; either version 2, or (at your option)
- *    any later version.
- *
- *    This program is distributed in the hope that it will be useful,
- *    but WITHOUT ANY WARRANTY; without even the implied warranty of
- *    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *    GNU General Public License for more details.
- *
- *    You should have received a copy of the GNU General Public License
- *    along with this program; if not, write to the Free Software
- *    Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- * 
- * Fixup routines for kernel exception handling.
- */
-#include <asm/asm-offsets.h>
-#include <asm/assembly.h>
-#include <asm/errno.h>
-#include <linux/linkage.h>
-
-#ifdef CONFIG_SMP
-	.macro  get_fault_ip t1 t2
-	loadgp
-	addil LT%__per_cpu_offset,%r27
-	LDREG RT%__per_cpu_offset(%r1),\t1
-	/* t2 = smp_processor_id() */
-	mfctl 30,\t2
-	ldw TI_CPU(\t2),\t2
-#ifdef CONFIG_64BIT
-	extrd,u \t2,63,32,\t2
-#endif
-	/* t2 = &__per_cpu_offset[smp_processor_id()]; */
-	LDREGX \t2(\t1),\t2 
-	addil LT%exception_data,%r27
-	LDREG RT%exception_data(%r1),\t1
-	/* t1 = this_cpu_ptr(&exception_data) */
-	add,l \t1,\t2,\t1
-	/* %r27 = t1->fault_gp - restore gp */
-	LDREG EXCDATA_GP(\t1), %r27
-	/* t1 = t1->fault_ip */
-	LDREG EXCDATA_IP(\t1), \t1
-	.endm
-#else
-	.macro  get_fault_ip t1 t2
-	loadgp
-	/* t1 = this_cpu_ptr(&exception_data) */
-	addil LT%exception_data,%r27
-	LDREG RT%exception_data(%r1),\t2
-	/* %r27 = t2->fault_gp - restore gp */
-	LDREG EXCDATA_GP(\t2), %r27
-	/* t1 = t2->fault_ip */
-	LDREG EXCDATA_IP(\t2), \t1
-	.endm
-#endif
-
-	.level LEVEL
-
-	.text
-	.section .fixup, "ax"
-
-	/* get_user() fixups, store -EFAULT in r8, and 0 in r9 */
-ENTRY_CFI(fixup_get_user_skip_1)
-	get_fault_ip %r1,%r8
-	ldo 4(%r1), %r1
-	ldi -EFAULT, %r8
-	bv %r0(%r1)
-	copy %r0, %r9
-ENDPROC_CFI(fixup_get_user_skip_1)
-
-ENTRY_CFI(fixup_get_user_skip_2)
-	get_fault_ip %r1,%r8
-	ldo 8(%r1), %r1
-	ldi -EFAULT, %r8
-	bv %r0(%r1)
-	copy %r0, %r9
-ENDPROC_CFI(fixup_get_user_skip_2)
-
-	/* put_user() fixups, store -EFAULT in r8 */
-ENTRY_CFI(fixup_put_user_skip_1)
-	get_fault_ip %r1,%r8
-	ldo 4(%r1), %r1
-	bv %r0(%r1)
-	ldi -EFAULT, %r8
-ENDPROC_CFI(fixup_put_user_skip_1)
-
-ENTRY_CFI(fixup_put_user_skip_2)
-	get_fault_ip %r1,%r8
-	ldo 8(%r1), %r1
-	bv %r0(%r1)
-	ldi -EFAULT, %r8
-ENDPROC_CFI(fixup_put_user_skip_2)
-

arch/parisc/lib/lusercopy.S

@@ -5,6 +5,8 @@
  *    Copyright (C) 2000 Richard Hirst <rhirst with parisc-linux.org>
  *    Copyright (C) 2001 Matthieu Delahaye <delahaym at esiee.fr>
  *    Copyright (C) 2003 Randolph Chung <tausq with parisc-linux.org>
+ *    Copyright (C) 2017 Helge Deller <deller@gmx.de>
+ *    Copyright (C) 2017 John David Anglin <dave.anglin@bell.net>
  *
  *
  *    This program is free software; you can redistribute it and/or modify
@@ -132,4 +134,320 @@ ENDPROC_CFI(lstrnlen_user)
 
 	.procend
 
+
+
+/*
+ * unsigned long pa_memcpy(void *dstp, const void *srcp, unsigned long len)
+ *
+ * Inputs:
+ * - sr1 already contains space of source region
+ * - sr2 already contains space of destination region
+ *
+ * Returns:
+ * - number of bytes that could not be copied.
+ *   On success, this will be zero.
+ *
+ * This code is based on a C-implementation of a copy routine written by
+ * Randolph Chung, which in turn was derived from the glibc.
+ *
+ * Several strategies are tried to try to get the best performance for various
+ * conditions. In the optimal case, we copy by loops that copy 32- or 16-bytes
+ * at a time using general registers.  Unaligned copies are handled either by
+ * aligning the destination and then using shift-and-write method, or in a few
+ * cases by falling back to a byte-at-a-time copy.
+ *
+ * Testing with various alignments and buffer sizes shows that this code is
+ * often >10x faster than a simple byte-at-a-time copy, even for strangely
+ * aligned operands. It is interesting to note that the glibc version of memcpy
+ * (written in C) is actually quite fast already. This routine is able to beat
+ * it by 30-40% for aligned copies because of the loop unrolling, but in some
+ * cases the glibc version is still slightly faster. This lends more
+ * credibility that gcc can generate very good code as long as we are careful.
+ *
+ * Possible optimizations:
+ * - add cache prefetching
+ * - try not to use the post-increment address modifiers; they may create
+ *   additional interlocks. Assumption is that those were only efficient on old
+ *   machines (pre PA8000 processors)
+ */
+
+	dst = arg0
+	src = arg1
+	len = arg2
+	end = arg3
+	t1  = r19
+	t2  = r20
+	t3  = r21
+	t4  = r22
+	srcspc = sr1
+	dstspc = sr2
+
+	t0 = r1
+	a1 = t1
+	a2 = t2
+	a3 = t3
+	a0 = t4
+
+	save_src = ret0
+	save_dst = ret1
+	save_len = r31
+
+ENTRY_CFI(pa_memcpy)
+	.proc
+	.callinfo NO_CALLS
+	.entry
+
+	/* Last destination address */
+	add	dst,len,end
+
+	/* short copy with less than 16 bytes? */
+	cmpib,>>=,n 15,len,.Lbyte_loop
+
+	/* same alignment? */
+	xor	src,dst,t0
+	extru	t0,31,2,t1
+	cmpib,<>,n  0,t1,.Lunaligned_copy
+
+#ifdef CONFIG_64BIT
+	/* only do 64-bit copies if we can get aligned. */
+	extru	t0,31,3,t1
+	cmpib,<>,n  0,t1,.Lalign_loop32
+
+	/* loop until we are 64-bit aligned */
+.Lalign_loop64:
+	extru	dst,31,3,t1
+	cmpib,=,n	0,t1,.Lcopy_loop_16
+20:	ldb,ma	1(srcspc,src),t1
+21:	stb,ma	t1,1(dstspc,dst)
+	b	.Lalign_loop64
+	ldo	-1(len),len
+
+	ASM_EXCEPTIONTABLE_ENTRY(20b,.Lcopy_done)
+	ASM_EXCEPTIONTABLE_ENTRY(21b,.Lcopy_done)
+
+	ldi	31,t0
+.Lcopy_loop_16:
+	cmpb,COND(>>=),n t0,len,.Lword_loop
+
+10:	ldd	0(srcspc,src),t1
+11:	ldd	8(srcspc,src),t2
+	ldo	16(src),src
+12:	std,ma	t1,8(dstspc,dst)
+13:	std,ma	t2,8(dstspc,dst)
+14:	ldd	0(srcspc,src),t1
+15:	ldd	8(srcspc,src),t2
+	ldo	16(src),src
+16:	std,ma	t1,8(dstspc,dst)
+17:	std,ma	t2,8(dstspc,dst)
+
+	ASM_EXCEPTIONTABLE_ENTRY(10b,.Lcopy_done)
+	ASM_EXCEPTIONTABLE_ENTRY(11b,.Lcopy16_fault)
+	ASM_EXCEPTIONTABLE_ENTRY(12b,.Lcopy_done)
+	ASM_EXCEPTIONTABLE_ENTRY(13b,.Lcopy_done)
+	ASM_EXCEPTIONTABLE_ENTRY(14b,.Lcopy_done)
+	ASM_EXCEPTIONTABLE_ENTRY(15b,.Lcopy16_fault)
+	ASM_EXCEPTIONTABLE_ENTRY(16b,.Lcopy_done)
+	ASM_EXCEPTIONTABLE_ENTRY(17b,.Lcopy_done)
+
+	b	.Lcopy_loop_16
+	ldo	-32(len),len
+
+.Lword_loop:
+	cmpib,COND(>>=),n 3,len,.Lbyte_loop
+20:	ldw,ma	4(srcspc,src),t1
+21:	stw,ma	t1,4(dstspc,dst)
+	b	.Lword_loop
+	ldo	-4(len),len
+
+	ASM_EXCEPTIONTABLE_ENTRY(20b,.Lcopy_done)
+	ASM_EXCEPTIONTABLE_ENTRY(21b,.Lcopy_done)
+
+#endif /* CONFIG_64BIT */
+
+	/* loop until we are 32-bit aligned */
+.Lalign_loop32:
+	extru	dst,31,2,t1
+	cmpib,=,n	0,t1,.Lcopy_loop_4
+20:	ldb,ma	1(srcspc,src),t1
+21:	stb,ma	t1,1(dstspc,dst)
+	b	.Lalign_loop32
+	ldo	-1(len),len
+
+	ASM_EXCEPTIONTABLE_ENTRY(20b,.Lcopy_done)
+	ASM_EXCEPTIONTABLE_ENTRY(21b,.Lcopy_done)
+
+
+.Lcopy_loop_4:
+	cmpib,COND(>>=),n 15,len,.Lbyte_loop
+
+10:	ldw	0(srcspc,src),t1
+11:	ldw	4(srcspc,src),t2
+12:	stw,ma	t1,4(dstspc,dst)
+13:	stw,ma	t2,4(dstspc,dst)
+14:	ldw	8(srcspc,src),t1
+15:	ldw	12(srcspc,src),t2
+	ldo	16(src),src
+16:	stw,ma	t1,4(dstspc,dst)
+17:	stw,ma	t2,4(dstspc,dst)
+
+	ASM_EXCEPTIONTABLE_ENTRY(10b,.Lcopy_done)
+	ASM_EXCEPTIONTABLE_ENTRY(11b,.Lcopy8_fault)
+	ASM_EXCEPTIONTABLE_ENTRY(12b,.Lcopy_done)
+	ASM_EXCEPTIONTABLE_ENTRY(13b,.Lcopy_done)
+	ASM_EXCEPTIONTABLE_ENTRY(14b,.Lcopy_done)
+	ASM_EXCEPTIONTABLE_ENTRY(15b,.Lcopy8_fault)
+	ASM_EXCEPTIONTABLE_ENTRY(16b,.Lcopy_done)
+	ASM_EXCEPTIONTABLE_ENTRY(17b,.Lcopy_done)
+
+	b	.Lcopy_loop_4
+	ldo	-16(len),len
+
+.Lbyte_loop:
+	cmpclr,COND(<>) len,%r0,%r0
+	b,n	.Lcopy_done
+20:	ldb	0(srcspc,src),t1
+	ldo	1(src),src
+21:	stb,ma	t1,1(dstspc,dst)
+	b	.Lbyte_loop
+	ldo	-1(len),len
+
+	ASM_EXCEPTIONTABLE_ENTRY(20b,.Lcopy_done)
+	ASM_EXCEPTIONTABLE_ENTRY(21b,.Lcopy_done)
+
+.Lcopy_done:
+	bv	%r0(%r2)
+	sub	end,dst,ret0
+
+
+	/* src and dst are not aligned the same way. */
+	/* need to go the hard way */
+.Lunaligned_copy:
+	/* align until dst is 32bit-word-aligned */
+	extru	dst,31,2,t1
+	cmpib,COND(=),n	0,t1,.Lcopy_dstaligned
+20:	ldb	0(srcspc,src),t1
+	ldo	1(src),src
+21:	stb,ma	t1,1(dstspc,dst)
+	b	.Lunaligned_copy
+	ldo	-1(len),len
+
+	ASM_EXCEPTIONTABLE_ENTRY(20b,.Lcopy_done)
+	ASM_EXCEPTIONTABLE_ENTRY(21b,.Lcopy_done)
+
+.Lcopy_dstaligned:
+
+	/* store src, dst and len in safe place */
+	copy	src,save_src
+	copy	dst,save_dst
+	copy	len,save_len
+
+	/* len now needs give number of words to copy */
+	SHRREG	len,2,len
+
+	/*
+	 * Copy from a not-aligned src to an aligned dst using shifts.
+	 * Handles 4 words per loop.
+	 */
+
+	depw,z src,28,2,t0
+	subi 32,t0,t0
+	mtsar t0
+	extru len,31,2,t0
+	cmpib,= 2,t0,.Lcase2
+	/* Make src aligned by rounding it down.  */
+	depi 0,31,2,src
+
+	cmpiclr,<> 3,t0,%r0
+	b,n .Lcase3
+	cmpiclr,<> 1,t0,%r0
+	b,n .Lcase1
+.Lcase0:
+	cmpb,= %r0,len,.Lcda_finish
+	nop
+
+1:	ldw,ma 4(srcspc,src), a3
+	ASM_EXCEPTIONTABLE_ENTRY(1b,.Lcda_rdfault)
+1:	ldw,ma 4(srcspc,src), a0
+	ASM_EXCEPTIONTABLE_ENTRY(1b,.Lcda_rdfault)
+	b,n .Ldo3
+.Lcase1:
+1:	ldw,ma 4(srcspc,src), a2
+	ASM_EXCEPTIONTABLE_ENTRY(1b,.Lcda_rdfault)
+1:	ldw,ma 4(srcspc,src), a3
+	ASM_EXCEPTIONTABLE_ENTRY(1b,.Lcda_rdfault)
+	ldo -1(len),len
+	cmpb,=,n %r0,len,.Ldo0
+.Ldo4:
+1:	ldw,ma 4(srcspc,src), a0
+	ASM_EXCEPTIONTABLE_ENTRY(1b,.Lcda_rdfault)
+	shrpw a2, a3, %sar, t0
+1:	stw,ma t0, 4(dstspc,dst)
+	ASM_EXCEPTIONTABLE_ENTRY(1b,.Lcopy_done)
+.Ldo3:
+1:	ldw,ma 4(srcspc,src), a1
+	ASM_EXCEPTIONTABLE_ENTRY(1b,.Lcda_rdfault)
+	shrpw a3, a0, %sar, t0
+1:	stw,ma t0, 4(dstspc,dst)
+	ASM_EXCEPTIONTABLE_ENTRY(1b,.Lcopy_done)
+.Ldo2:
+1:	ldw,ma 4(srcspc,src), a2
+	ASM_EXCEPTIONTABLE_ENTRY(1b,.Lcda_rdfault)
+	shrpw a0, a1, %sar, t0
+1:	stw,ma t0, 4(dstspc,dst)
+	ASM_EXCEPTIONTABLE_ENTRY(1b,.Lcopy_done)
+.Ldo1:
+1:	ldw,ma 4(srcspc,src), a3
+	ASM_EXCEPTIONTABLE_ENTRY(1b,.Lcda_rdfault)
+	shrpw a1, a2, %sar, t0
+1:	stw,ma t0, 4(dstspc,dst)
+	ASM_EXCEPTIONTABLE_ENTRY(1b,.Lcopy_done)
+	ldo -4(len),len
+	cmpb,<> %r0,len,.Ldo4
+	nop
+.Ldo0:
+	shrpw a2, a3, %sar, t0
+1:	stw,ma t0, 4(dstspc,dst)
+	ASM_EXCEPTIONTABLE_ENTRY(1b,.Lcopy_done)
+
+.Lcda_rdfault:
+.Lcda_finish:
+	/* calculate new src, dst and len and jump to byte-copy loop */
+	sub	dst,save_dst,t0
+	add	save_src,t0,src
+	b	.Lbyte_loop
+	sub	save_len,t0,len
+
+.Lcase3:
+1:	ldw,ma 4(srcspc,src), a0
+	ASM_EXCEPTIONTABLE_ENTRY(1b,.Lcda_rdfault)
+1:	ldw,ma 4(srcspc,src), a1
+	ASM_EXCEPTIONTABLE_ENTRY(1b,.Lcda_rdfault)
+	b .Ldo2
+	ldo 1(len),len
+.Lcase2:
+1:	ldw,ma 4(srcspc,src), a1
+	ASM_EXCEPTIONTABLE_ENTRY(1b,.Lcda_rdfault)
+1:	ldw,ma 4(srcspc,src), a2
+	ASM_EXCEPTIONTABLE_ENTRY(1b,.Lcda_rdfault)
+	b .Ldo1
+	ldo 2(len),len
+
+
+	/* fault exception fixup handlers: */
+#ifdef CONFIG_64BIT
+.Lcopy16_fault:
+10:	b	.Lcopy_done
+	std,ma	t1,8(dstspc,dst)
+	ASM_EXCEPTIONTABLE_ENTRY(10b,.Lcopy_done)
+#endif
+
+.Lcopy8_fault:
+10:	b	.Lcopy_done
+	stw,ma	t1,4(dstspc,dst)
+	ASM_EXCEPTIONTABLE_ENTRY(10b,.Lcopy_done)
+
+	.exit
+ENDPROC_CFI(pa_memcpy)
+	.procend
+
 	.end

arch/parisc/lib/memcpy.c

@@ -2,7 +2,7 @@
  *    Optimized memory copy routines.
  *
  *    Copyright (C) 2004 Randolph Chung <tausq@debian.org>
- *    Copyright (C) 2013 Helge Deller <deller@gmx.de>
+ *    Copyright (C) 2013-2017 Helge Deller <deller@gmx.de>
  *
  *    This program is free software; you can redistribute it and/or modify
  *    it under the terms of the GNU General Public License as published by
@@ -21,474 +21,21 @@
  *    Portions derived from the GNU C Library
  *    Copyright (C) 1991, 1997, 2003 Free Software Foundation, Inc.
  *
- * Several strategies are tried to try to get the best performance for various
- * conditions. In the optimal case, we copy 64-bytes in an unrolled loop using 
- * fp regs. This is followed by loops that copy 32- or 16-bytes at a time using
- * general registers.  Unaligned copies are handled either by aligning the 
- * destination and then using shift-and-write method, or in a few cases by 
- * falling back to a byte-at-a-time copy.
- *
- * I chose to implement this in C because it is easier to maintain and debug,
- * and in my experiments it appears that the C code generated by gcc (3.3/3.4
- * at the time of writing) is fairly optimal. Unfortunately some of the 
- * semantics of the copy routine (exception handling) is difficult to express
- * in C, so we have to play some tricks to get it to work.
- *
- * All the loads and stores are done via explicit asm() code in order to use
- * the right space registers. 
- * 
- * Testing with various alignments and buffer sizes shows that this code is 
- * often >10x faster than a simple byte-at-a-time copy, even for strangely
- * aligned operands. It is interesting to note that the glibc version
- * of memcpy (written in C) is actually quite fast already. This routine is 
- * able to beat it by 30-40% for aligned copies because of the loop unrolling, 
- * but in some cases the glibc version is still slightly faster. This lends 
- * more credibility that gcc can generate very good code as long as we are 
- * careful.
- *
- * TODO:
- * - cache prefetching needs more experimentation to get optimal settings
- * - try not to use the post-increment address modifiers; they create additional
- *   interlocks
- * - replace byte-copy loops with stybs sequences
  */
 
-#ifdef __KERNEL__
 #include <linux/module.h>
 #include <linux/compiler.h>
 #include <linux/uaccess.h>
-#define s_space "%%sr1"
-#define d_space "%%sr2"
-#else
-#include "memcpy.h"
-#define s_space "%%sr0"
-#define d_space "%%sr0"
-#define pa_memcpy new2_copy
-#endif
 
 DECLARE_PER_CPU(struct exception_data, exception_data);
 
-#define preserve_branch(label)	do {					\
-	volatile int dummy = 0;						\
-	/* The following branch is never taken, it's just here to  */	\
-	/* prevent gcc from optimizing away our exception code. */ 	\
-	if (unlikely(dummy != dummy))					\
-		goto label;						\
-} while (0)
-
 #define get_user_space() (segment_eq(get_fs(), KERNEL_DS) ? 0 : mfsp(3))
 #define get_kernel_space() (0)
 
-#define MERGE(w0, sh_1, w1, sh_2)  ({					\
-	unsigned int _r;						\
-	asm volatile (							\
-	"mtsar %3\n"							\
-	"shrpw %1, %2, %%sar, %0\n"					\
-	: "=r"(_r)							\
-	: "r"(w0), "r"(w1), "r"(sh_2)					\
-	);								\
-	_r;								\
-})
-#define THRESHOLD	16
-
-#ifdef DEBUG_MEMCPY
-#define DPRINTF(fmt, args...) do { printk(KERN_DEBUG "%s:%d:%s ", __FILE__, __LINE__, __func__ ); printk(KERN_DEBUG fmt, ##args ); } while (0)
-#else
-#define DPRINTF(fmt, args...)
-#endif
-
-#define def_load_ai_insn(_insn,_sz,_tt,_s,_a,_t,_e)	\
-	__asm__ __volatile__ (				\
-	"1:\t" #_insn ",ma " #_sz "(" _s ",%1), %0\n\t"	\
-	ASM_EXCEPTIONTABLE_ENTRY(1b,_e)			\
-	: _tt(_t), "+r"(_a)				\
-	: 						\
-	: "r8")
-
-#define def_store_ai_insn(_insn,_sz,_tt,_s,_a,_t,_e) 	\
-	__asm__ __volatile__ (				\
-	"1:\t" #_insn ",ma %1, " #_sz "(" _s ",%0)\n\t"	\
-	ASM_EXCEPTIONTABLE_ENTRY(1b,_e)			\
-	: "+r"(_a) 					\
-	: _tt(_t)					\
-	: "r8")
-
-#define ldbma(_s, _a, _t, _e) def_load_ai_insn(ldbs,1,"=r",_s,_a,_t,_e)
-#define stbma(_s, _t, _a, _e) def_store_ai_insn(stbs,1,"r",_s,_a,_t,_e)
-#define ldwma(_s, _a, _t, _e) def_load_ai_insn(ldw,4,"=r",_s,_a,_t,_e)
-#define stwma(_s, _t, _a, _e) def_store_ai_insn(stw,4,"r",_s,_a,_t,_e)
-#define flddma(_s, _a, _t, _e) def_load_ai_insn(fldd,8,"=f",_s,_a,_t,_e)
-#define fstdma(_s, _t, _a, _e) def_store_ai_insn(fstd,8,"f",_s,_a,_t,_e)
-
-#define def_load_insn(_insn,_tt,_s,_o,_a,_t,_e) 	\
-	__asm__ __volatile__ (				\
-	"1:\t" #_insn " " #_o "(" _s ",%1), %0\n\t"	\
-	ASM_EXCEPTIONTABLE_ENTRY(1b,_e)			\
-	: _tt(_t) 					\
-	: "r"(_a)					\
-	: "r8")
-
-#define def_store_insn(_insn,_tt,_s,_t,_o,_a,_e) 	\
-	__asm__ __volatile__ (				\
-	"1:\t" #_insn " %0, " #_o "(" _s ",%1)\n\t" 	\
-	ASM_EXCEPTIONTABLE_ENTRY(1b,_e)			\
-	: 						\
-	: _tt(_t), "r"(_a)				\
-	: "r8")
-
-#define ldw(_s,_o,_a,_t,_e)	def_load_insn(ldw,"=r",_s,_o,_a,_t,_e)
-#define stw(_s,_t,_o,_a,_e) 	def_store_insn(stw,"r",_s,_t,_o,_a,_e)
-
-#ifdef  CONFIG_PREFETCH
-static inline void prefetch_src(const void *addr)
-{
-	__asm__("ldw 0(" s_space ",%0), %%r0" : : "r" (addr));
-}
-
-static inline void prefetch_dst(const void *addr)
-{
-	__asm__("ldd 0(" d_space ",%0), %%r0" : : "r" (addr));
-}
-#else
-#define prefetch_src(addr) do { } while(0)
-#define prefetch_dst(addr) do { } while(0)
-#endif
-
-#define PA_MEMCPY_OK		0
-#define PA_MEMCPY_LOAD_ERROR	1
-#define PA_MEMCPY_STORE_ERROR	2
-
-/* Copy from a not-aligned src to an aligned dst, using shifts. Handles 4 words
- * per loop.  This code is derived from glibc. 
- */
-static noinline unsigned long copy_dstaligned(unsigned long dst,
-					unsigned long src, unsigned long len)
-{
-	/* gcc complains that a2 and a3 may be uninitialized, but actually
-	 * they cannot be.  Initialize a2/a3 to shut gcc up.
-	 */
-	register unsigned int a0, a1, a2 = 0, a3 = 0;
-	int sh_1, sh_2;
-
-	/* prefetch_src((const void *)src); */
-
-	/* Calculate how to shift a word read at the memory operation
-	   aligned srcp to make it aligned for copy.  */
-	sh_1 = 8 * (src % sizeof(unsigned int));
-	sh_2 = 8 * sizeof(unsigned int) - sh_1;
-
-	/* Make src aligned by rounding it down.  */
-	src &= -sizeof(unsigned int);
-
-	switch (len % 4)
-	{
-		case 2:
-			/* a1 = ((unsigned int *) src)[0];
-			   a2 = ((unsigned int *) src)[1]; */
-			ldw(s_space, 0, src, a1, cda_ldw_exc);
-			ldw(s_space, 4, src, a2, cda_ldw_exc);
-			src -= 1 * sizeof(unsigned int);
-			dst -= 3 * sizeof(unsigned int);
-			len += 2;
-			goto do1;
-		case 3:
-			/* a0 = ((unsigned int *) src)[0];
-			   a1 = ((unsigned int *) src)[1]; */
-			ldw(s_space, 0, src, a0, cda_ldw_exc);
-			ldw(s_space, 4, src, a1, cda_ldw_exc);
-			src -= 0 * sizeof(unsigned int);
-			dst -= 2 * sizeof(unsigned int);
-			len += 1;
-			goto do2;
-		case 0:
-			if (len == 0)
-				return PA_MEMCPY_OK;
-			/* a3 = ((unsigned int *) src)[0];
-			   a0 = ((unsigned int *) src)[1]; */
-			ldw(s_space, 0, src, a3, cda_ldw_exc);
-			ldw(s_space, 4, src, a0, cda_ldw_exc);
-			src -=-1 * sizeof(unsigned int);
-			dst -= 1 * sizeof(unsigned int);
-			len += 0;
-			goto do3;
-		case 1:
-			/* a2 = ((unsigned int *) src)[0];
-			   a3 = ((unsigned int *) src)[1]; */
-			ldw(s_space, 0, src, a2, cda_ldw_exc);
-			ldw(s_space, 4, src, a3, cda_ldw_exc);
-			src -=-2 * sizeof(unsigned int);
-			dst -= 0 * sizeof(unsigned int);
-			len -= 1;
-			if (len == 0)
-				goto do0;
-			goto do4;			/* No-op.  */
-	}
-
-	do
-	{
-		/* prefetch_src((const void *)(src + 4 * sizeof(unsigned int))); */
-do4:
-		/* a0 = ((unsigned int *) src)[0]; */
-		ldw(s_space, 0, src, a0, cda_ldw_exc);
-		/* ((unsigned int *) dst)[0] = MERGE (a2, sh_1, a3, sh_2); */
-		stw(d_space, MERGE (a2, sh_1, a3, sh_2), 0, dst, cda_stw_exc);
-do3:
-		/* a1 = ((unsigned int *) src)[1]; */
-		ldw(s_space, 4, src, a1, cda_ldw_exc);
-		/* ((unsigned int *) dst)[1] = MERGE (a3, sh_1, a0, sh_2); */
-		stw(d_space, MERGE (a3, sh_1, a0, sh_2), 4, dst, cda_stw_exc);
-do2:
-		/* a2 = ((unsigned int *) src)[2]; */
-		ldw(s_space, 8, src, a2, cda_ldw_exc);
-		/* ((unsigned int *) dst)[2] = MERGE (a0, sh_1, a1, sh_2); */
-		stw(d_space, MERGE (a0, sh_1, a1, sh_2), 8, dst, cda_stw_exc);
-do1:
-		/* a3 = ((unsigned int *) src)[3]; */
-		ldw(s_space, 12, src, a3, cda_ldw_exc);
-		/* ((unsigned int *) dst)[3] = MERGE (a1, sh_1, a2, sh_2); */
-		stw(d_space, MERGE (a1, sh_1, a2, sh_2), 12, dst, cda_stw_exc);
-
-		src += 4 * sizeof(unsigned int);
-		dst += 4 * sizeof(unsigned int);
-		len -= 4;
-	}
-	while (len != 0);
-
-do0:
-	/* ((unsigned int *) dst)[0] = MERGE (a2, sh_1, a3, sh_2); */
-	stw(d_space, MERGE (a2, sh_1, a3, sh_2), 0, dst, cda_stw_exc);
-
-	preserve_branch(handle_load_error);
-	preserve_branch(handle_store_error);
-
-	return PA_MEMCPY_OK;
-
-handle_load_error:
-	__asm__ __volatile__ ("cda_ldw_exc:\n");
-	return PA_MEMCPY_LOAD_ERROR;
-
-handle_store_error:
-	__asm__ __volatile__ ("cda_stw_exc:\n");
-	return PA_MEMCPY_STORE_ERROR;
-}
-
-
-/* Returns PA_MEMCPY_OK, PA_MEMCPY_LOAD_ERROR or PA_MEMCPY_STORE_ERROR.
- * In case of an access fault the faulty address can be read from the per_cpu
- * exception data struct. */
-static noinline unsigned long pa_memcpy_internal(void *dstp, const void *srcp,
-					unsigned long len)
-{
-	register unsigned long src, dst, t1, t2, t3;
-	register unsigned char *pcs, *pcd;
-	register unsigned int *pws, *pwd;
-	register double *pds, *pdd;
-	unsigned long ret;
-
-	src = (unsigned long)srcp;
-	dst = (unsigned long)dstp;
-	pcs = (unsigned char *)srcp;
-	pcd = (unsigned char *)dstp;
-
-	/* prefetch_src((const void *)srcp); */
-
-	if (len < THRESHOLD)
-		goto byte_copy;
-
-	/* Check alignment */
-	t1 = (src ^ dst);
-	if (unlikely(t1 & (sizeof(double)-1)))
-		goto unaligned_copy;
-
-	/* src and dst have same alignment. */
-
-	/* Copy bytes till we are double-aligned. */
-	t2 = src & (sizeof(double) - 1);
-	if (unlikely(t2 != 0)) {
-		t2 = sizeof(double) - t2;
-		while (t2 && len) {
-			/* *pcd++ = *pcs++; */
-			ldbma(s_space, pcs, t3, pmc_load_exc);
-			len--;
-			stbma(d_space, t3, pcd, pmc_store_exc);
-			t2--;
-		}
-	}
-
-	pds = (double *)pcs;
-	pdd = (double *)pcd;
-
-#if 0
-	/* Copy 8 doubles at a time */
-	while (len >= 8*sizeof(double)) {
-		register double r1, r2, r3, r4, r5, r6, r7, r8;
-		/* prefetch_src((char *)pds + L1_CACHE_BYTES); */
-		flddma(s_space, pds, r1, pmc_load_exc);
-		flddma(s_space, pds, r2, pmc_load_exc);
-		flddma(s_space, pds, r3, pmc_load_exc);
-		flddma(s_space, pds, r4, pmc_load_exc);
-		fstdma(d_space, r1, pdd, pmc_store_exc);
-		fstdma(d_space, r2, pdd, pmc_store_exc);
-		fstdma(d_space, r3, pdd, pmc_store_exc);
-		fstdma(d_space, r4, pdd, pmc_store_exc);
-
-#if 0
-		if (L1_CACHE_BYTES <= 32)
-			prefetch_src((char *)pds + L1_CACHE_BYTES);
-#endif
-		flddma(s_space, pds, r5, pmc_load_exc);
-		flddma(s_space, pds, r6, pmc_load_exc);
-		flddma(s_space, pds, r7, pmc_load_exc);
-		flddma(s_space, pds, r8, pmc_load_exc);
-		fstdma(d_space, r5, pdd, pmc_store_exc);
-		fstdma(d_space, r6, pdd, pmc_store_exc);
-		fstdma(d_space, r7, pdd, pmc_store_exc);
-		fstdma(d_space, r8, pdd, pmc_store_exc);
-		len -= 8*sizeof(double);
-	}
-#endif
-
-	pws = (unsigned int *)pds;
-	pwd = (unsigned int *)pdd;
-
-word_copy:
-	while (len >= 8*sizeof(unsigned int)) {
-		register unsigned int r1,r2,r3,r4,r5,r6,r7,r8;
-		/* prefetch_src((char *)pws + L1_CACHE_BYTES); */
-		ldwma(s_space, pws, r1, pmc_load_exc);
-		ldwma(s_space, pws, r2, pmc_load_exc);
-		ldwma(s_space, pws, r3, pmc_load_exc);
-		ldwma(s_space, pws, r4, pmc_load_exc);
-		stwma(d_space, r1, pwd, pmc_store_exc);
-		stwma(d_space, r2, pwd, pmc_store_exc);
-		stwma(d_space, r3, pwd, pmc_store_exc);
-		stwma(d_space, r4, pwd, pmc_store_exc);
-
-		ldwma(s_space, pws, r5, pmc_load_exc);
-		ldwma(s_space, pws, r6, pmc_load_exc);
-		ldwma(s_space, pws, r7, pmc_load_exc);
-		ldwma(s_space, pws, r8, pmc_load_exc);
-		stwma(d_space, r5, pwd, pmc_store_exc);
-		stwma(d_space, r6, pwd, pmc_store_exc);
-		stwma(d_space, r7, pwd, pmc_store_exc);
-		stwma(d_space, r8, pwd, pmc_store_exc);
-		len -= 8*sizeof(unsigned int);
-	}
-
-	while (len >= 4*sizeof(unsigned int)) {
-		register unsigned int r1,r2,r3,r4;
-		ldwma(s_space, pws, r1, pmc_load_exc);
-		ldwma(s_space, pws, r2, pmc_load_exc);
-		ldwma(s_space, pws, r3, pmc_load_exc);
-		ldwma(s_space, pws, r4, pmc_load_exc);
-		stwma(d_space, r1, pwd, pmc_store_exc);
-		stwma(d_space, r2, pwd, pmc_store_exc);
-		stwma(d_space, r3, pwd, pmc_store_exc);
-		stwma(d_space, r4, pwd, pmc_store_exc);
-		len -= 4*sizeof(unsigned int);
-	}
-
-	pcs = (unsigned char *)pws;
-	pcd = (unsigned char *)pwd;
-
-byte_copy:
-	while (len) {
-		/* *pcd++ = *pcs++; */
-		ldbma(s_space, pcs, t3, pmc_load_exc);
-		stbma(d_space, t3, pcd, pmc_store_exc);
-		len--;
-	}
-
-	return PA_MEMCPY_OK;
-
-unaligned_copy:
-	/* possibly we are aligned on a word, but not on a double... */
-	if (likely((t1 & (sizeof(unsigned int)-1)) == 0)) {
-		t2 = src & (sizeof(unsigned int) - 1);
-
-		if (unlikely(t2 != 0)) {
-			t2 = sizeof(unsigned int) - t2;
-			while (t2) {
-				/* *pcd++ = *pcs++; */
-				ldbma(s_space, pcs, t3, pmc_load_exc);
-				stbma(d_space, t3, pcd, pmc_store_exc);
-				len--;
-				t2--;
-			}
-		}
-
-		pws = (unsigned int *)pcs;
-		pwd = (unsigned int *)pcd;
-		goto word_copy;
-	}
-
-	/* Align the destination.  */
-	if (unlikely((dst & (sizeof(unsigned int) - 1)) != 0)) {
-		t2 = sizeof(unsigned int) - (dst & (sizeof(unsigned int) - 1));
-		while (t2) {
-			/* *pcd++ = *pcs++; */
-			ldbma(s_space, pcs, t3, pmc_load_exc);
-			stbma(d_space, t3, pcd, pmc_store_exc);
-			len--;
-			t2--;
-		}
-		dst = (unsigned long)pcd;
-		src = (unsigned long)pcs;
-	}
-
-	ret = copy_dstaligned(dst, src, len / sizeof(unsigned int));
-	if (ret)
-		return ret;
-
-	pcs += (len & -sizeof(unsigned int));
-	pcd += (len & -sizeof(unsigned int));
-	len %= sizeof(unsigned int);
-
-	preserve_branch(handle_load_error);
-	preserve_branch(handle_store_error);
-
-	goto byte_copy;
-
-handle_load_error:
-	__asm__ __volatile__ ("pmc_load_exc:\n");
-	return PA_MEMCPY_LOAD_ERROR;
-
-handle_store_error:
-	__asm__ __volatile__ ("pmc_store_exc:\n");
-	return PA_MEMCPY_STORE_ERROR;
-}
-
-
 /* Returns 0 for success, otherwise, returns number of bytes not transferred. */
-static unsigned long pa_memcpy(void *dstp, const void *srcp, unsigned long len)
-{
-	unsigned long ret, fault_addr, reference;
-	struct exception_data *d;
-
-	ret = pa_memcpy_internal(dstp, srcp, len);
-	if (likely(ret == PA_MEMCPY_OK))
-		return 0;
-
-	/* if a load or store fault occured we can get the faulty addr */
-	d = this_cpu_ptr(&exception_data);
-	fault_addr = d->fault_addr;
-
-	/* error in load or store? */
-	if (ret == PA_MEMCPY_LOAD_ERROR)
-		reference = (unsigned long) srcp;
-	else
-		reference = (unsigned long) dstp;
+extern unsigned long pa_memcpy(void *dst, const void *src,
+				unsigned long len);
 
-	DPRINTF("pa_memcpy: fault type = %lu, len=%lu fault_addr=%lu ref=%lu\n",
-		ret, len, fault_addr, reference);
-
-	if (fault_addr >= reference)
-		return len - (fault_addr - reference);
-	else
-		return len;
-}
-
-#ifdef __KERNEL__
 unsigned long __copy_to_user(void __user *dst, const void *src,
 			     unsigned long len)
 {
@@ -537,5 +84,3 @@ long probe_kernel_read(void *dst, const void *src, size_t size)
 
 	return __probe_kernel_read(dst, src, size);
 }
-
-#endif

arch/parisc/mm/fault.c

@@ -150,6 +150,23 @@ int fixup_exception(struct pt_regs *regs)
 		d->fault_space = regs->isr;
 		d->fault_addr = regs->ior;
 
+		/*
+		 * Fix up get_user() and put_user().
+		 * ASM_EXCEPTIONTABLE_ENTRY_EFAULT() sets the least-significant
+		 * bit in the relative address of the fixup routine to indicate
+		 * that %r8 should be loaded with -EFAULT to report a userspace
+		 * access error.
+		 */
+		if (fix->fixup & 1) {
+			regs->gr[8] = -EFAULT;
+
+			/* zero target register for get_user() */
+			if (parisc_acctyp(0, regs->iir) == VM_READ) {
+				int treg = regs->iir & 0x1f;
+				regs->gr[treg] = 0;
+			}
+		}
+
 		regs->iaoq[0] = (unsigned long)&fix->fixup + fix->fixup;
 		regs->iaoq[0] &= ~3;
 		/*

arch/powerpc/include/asm/systbl.h

@@ -387,3 +387,4 @@ SYSCALL(copy_file_range)
 COMPAT_SYS_SPU(preadv2)
 COMPAT_SYS_SPU(pwritev2)
 SYSCALL(kexec_file_load)
+SYSCALL(statx)

arch/powerpc/include/asm/unistd.h

@@ -12,7 +12,7 @@
 #include <uapi/asm/unistd.h>
 
 
-#define NR_syscalls		383
+#define NR_syscalls		384
 
 #define __NR__exit __NR_exit
 

arch/powerpc/include/uapi/asm/unistd.h

@@ -393,5 +393,6 @@
 #define __NR_preadv2		380
 #define __NR_pwritev2		381
 #define __NR_kexec_file_load	382
+#define __NR_statx		383
 
 #endif /* _UAPI_ASM_POWERPC_UNISTD_H_ */

arch/powerpc/kernel/idle_book3s.S

@@ -449,9 +449,23 @@ END_FTR_SECTION_IFSET(CPU_FTR_ARCH_300)
 _GLOBAL(pnv_wakeup_tb_loss)
 	ld	r1,PACAR1(r13)
 	/*
-	 * Before entering any idle state, the NVGPRs are saved in the stack
-	 * and they are restored before switching to the process context. Hence
-	 * until they are restored, they are free to be used.
+	 * Before entering any idle state, the NVGPRs are saved in the stack.
+	 * If there was a state loss, or PACA_NAPSTATELOST was set, then the
+	 * NVGPRs are restored. If we are here, it is likely that state is lost,
+	 * but not guaranteed -- neither ISA207 nor ISA300 tests to reach
+	 * here are the same as the test to restore NVGPRS:
+	 * PACA_THREAD_IDLE_STATE test for ISA207, PSSCR test for ISA300,
+	 * and SRR1 test for restoring NVGPRs.
+	 *
+	 * We are about to clobber NVGPRs now, so set NAPSTATELOST to
+	 * guarantee they will always be restored. This might be tightened
+	 * with careful reading of specs (particularly for ISA300) but this
+	 * is already a slow wakeup path and it's simpler to be safe.
+	 */
+	li	r0,1
+	stb	r0,PACA_NAPSTATELOST(r13)
+
+	/*
 	 *
 	 * Save SRR1 and LR in NVGPRs as they might be clobbered in
 	 * opal_call() (called in CHECK_HMI_INTERRUPT). SRR1 is required

arch/powerpc/mm/init_64.c

@@ -397,8 +397,7 @@ static void early_check_vec5(void)
 void __init mmu_early_init_devtree(void)
 {
 	/* Disable radix mode based on kernel command line. */
-	/* We don't yet have the machinery to do radix as a guest. */
-	if (disable_radix || !(mfmsr() & MSR_HV))
+	if (disable_radix)
 		cur_cpu_spec->mmu_features &= ~MMU_FTR_TYPE_RADIX;
 
 	/*

arch/powerpc/platforms/pseries/lpar.c

@@ -751,7 +751,9 @@ void __init hpte_init_pseries(void)
 	mmu_hash_ops.flush_hash_range	 = pSeries_lpar_flush_hash_range;
 	mmu_hash_ops.hpte_clear_all      = pseries_hpte_clear_all;
 	mmu_hash_ops.hugepage_invalidate = pSeries_lpar_hugepage_invalidate;
-	mmu_hash_ops.resize_hpt		 = pseries_lpar_resize_hpt;
+
+	if (firmware_has_feature(FW_FEATURE_HPT_RESIZE))
+		mmu_hash_ops.resize_hpt = pseries_lpar_resize_hpt;
 }
 
 void radix_init_pseries(void)

arch/s390/include/asm/sections.h

@@ -4,6 +4,5 @@
 #include <asm-generic/sections.h>
 
 extern char _eshared[], _ehead[];
-extern char __start_ro_after_init[], __end_ro_after_init[];
 
 #endif