dt-bindings: mediatek: add descriptions for mediatek mt2701 iommu and smi

This patch defines the local arbitor port IDs for mediatek SoC MT2701 and
add descriptions of binding for mediatek generation one iommu and smi.

Signed-off-by: Honghui Zhang <honghui.zhang@mediatek.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Joerg Roedel <jroedel@suse.de>

Documentation/devicetree/bindings/iommu/mediatek,iommu.txt

@@ -1,7 +1,9 @@
 * Mediatek IOMMU Architecture Implementation
 
-  Some Mediatek SOCs contain a Multimedia Memory Management Unit (M4U) which
-uses the ARM Short-Descriptor translation table format for address translation.
+  Some Mediatek SOCs contain a Multimedia Memory Management Unit (M4U), and
+this M4U have two generations of HW architecture. Generation one uses flat
+pagetable, and only supports 4K size page mapping. Generation two uses the
+ARM Short-Descriptor translation table format for address translation.
 
   About the M4U Hardware Block Diagram, please check below:
 
@@ -36,7 +38,9 @@ in each larb. Take a example, There are many ports like MC, PP, VLD in the
 video decode local arbiter, all these ports are according to the video HW.
 
 Required properties:
-- compatible : must be "mediatek,mt8173-m4u".
+- compatible : must be one of the following string:
+	"mediatek,mt2701-m4u" for mt2701 which uses generation one m4u HW.
+	"mediatek,mt8173-m4u" for mt8173 which uses generation two m4u HW.
 - reg : m4u register base and size.
 - interrupts : the interrupt of m4u.
 - clocks : must contain one entry for each clock-names.
@@ -46,7 +50,8 @@ Required properties:
 	according to the local arbiter index, like larb0, larb1, larb2...
 - iommu-cells : must be 1. This is the mtk_m4u_id according to the HW.
 	Specifies the mtk_m4u_id as defined in
-	dt-binding/memory/mt8173-larb-port.h.
+	dt-binding/memory/mt2701-larb-port.h for mt2701 and
+	dt-binding/memory/mt8173-larb-port.h for mt8173
 
 Example:
 	iommu: iommu@10205000 {

Documentation/devicetree/bindings/memory-controllers/mediatek,smi-common.txt

@@ -2,16 +2,31 @@ SMI (Smart Multimedia Interface) Common
 
 The hardware block diagram please check bindings/iommu/mediatek,iommu.txt
 
+Mediatek SMI have two generations of HW architecture, mt8173 uses the second
+generation of SMI HW while mt2701 uses the first generation HW of SMI.
+
+There's slight differences between the two SMI, for generation 2, the
+register which control the iommu port is at each larb's register base. But
+for generation 1, the register is at smi ao base(smi always on register
+base). Besides that, the smi async clock should be prepared and enabled for
+SMI generation 1 to transform the smi clock into emi clock domain, but that is
+not needed for SMI generation 2.
+
 Required properties:
-- compatible : must be "mediatek,mt8173-smi-common"
+- compatible : must be one of :
+	"mediatek,mt2701-smi-common"
+	"mediatek,mt8173-smi-common"
 - reg : the register and size of the SMI block.
 - power-domains : a phandle to the power domain of this local arbiter.
 - clocks : Must contain an entry for each entry in clock-names.
-- clock-names : must contain 2 entries, as follows:
+- clock-names : must contain 3 entries for generation 1 smi HW and 2 entries
+  for generation 2 smi HW as follows:
   - "apb" : Advanced Peripheral Bus clock, It's the clock for setting
 	    the register.
   - "smi" : It's the clock for transfer data and command.
-  They may be the same if both source clocks are the same.
+	    They may be the same if both source clocks are the same.
+  - "async" : asynchronous clock, it help transform the smi clock into the emi
+	      clock domain, this clock is only needed by generation 1 smi HW.
 
 Example:
 	smi_common: smi@14022000 {

Documentation/devicetree/bindings/memory-controllers/mediatek,smi-larb.txt

@@ -3,7 +3,9 @@ SMI (Smart Multimedia Interface) Local Arbiter
 The hardware block diagram please check bindings/iommu/mediatek,iommu.txt
 
 Required properties:
-- compatible : must be "mediatek,mt8173-smi-larb"
+- compatible : must be one of :
+		"mediatek,mt8173-smi-larb"
+		"mediatek,mt2701-smi-larb"
 - reg : the register and size of this local arbiter.
 - mediatek,smi : a phandle to the smi_common node.
 - power-domains : a phandle to the power domain of this local arbiter.

include/dt-bindings/memory/mt2701-larb-port.h

@@ -0,0 +1,85 @@
+/*
+ * Copyright (c) 2015 MediaTek Inc.
+ * Author: Honghui Zhang <honghui.zhang@mediatek.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef _MT2701_LARB_PORT_H_
+#define _MT2701_LARB_PORT_H_
+
+/*
+ * Mediatek m4u generation 1 such as mt2701 has flat m4u port numbers,
+ * the first port's id for larb[N] would be the last port's id of larb[N - 1]
+ * plus one while larb[0]'s first port number is 0. The definition of
+ * MT2701_M4U_ID_LARBx is following HW register spec.
+ * But m4u generation 2 like mt8173 have different port number, it use fixed
+ * offset for each larb, the first port's id for larb[N] would be (N * 32).
+ */
+#define LARB0_PORT_OFFSET		0
+#define LARB1_PORT_OFFSET		11
+#define LARB2_PORT_OFFSET		21
+#define LARB3_PORT_OFFSET		43
+
+#define MT2701_M4U_ID_LARB0(port)	((port) + LARB0_PORT_OFFSET)
+#define MT2701_M4U_ID_LARB1(port)	((port) + LARB1_PORT_OFFSET)
+#define MT2701_M4U_ID_LARB2(port)	((port) + LARB2_PORT_OFFSET)
+
+/* Port define for larb0 */
+#define MT2701_M4U_PORT_DISP_OVL_0		MT2701_M4U_ID_LARB0(0)
+#define MT2701_M4U_PORT_DISP_RDMA1		MT2701_M4U_ID_LARB0(1)
+#define MT2701_M4U_PORT_DISP_RDMA		MT2701_M4U_ID_LARB0(2)
+#define MT2701_M4U_PORT_DISP_WDMA		MT2701_M4U_ID_LARB0(3)
+#define MT2701_M4U_PORT_MM_CMDQ			MT2701_M4U_ID_LARB0(4)
+#define MT2701_M4U_PORT_MDP_RDMA		MT2701_M4U_ID_LARB0(5)
+#define MT2701_M4U_PORT_MDP_WDMA		MT2701_M4U_ID_LARB0(6)
+#define MT2701_M4U_PORT_MDP_ROTO		MT2701_M4U_ID_LARB0(7)
+#define MT2701_M4U_PORT_MDP_ROTCO		MT2701_M4U_ID_LARB0(8)
+#define MT2701_M4U_PORT_MDP_ROTVO		MT2701_M4U_ID_LARB0(9)
+#define MT2701_M4U_PORT_MDP_RDMA1		MT2701_M4U_ID_LARB0(10)
+
+/* Port define for larb1 */
+#define MT2701_M4U_PORT_VDEC_MC_EXT		MT2701_M4U_ID_LARB1(0)
+#define MT2701_M4U_PORT_VDEC_PP_EXT		MT2701_M4U_ID_LARB1(1)
+#define MT2701_M4U_PORT_VDEC_PPWRAP_EXT		MT2701_M4U_ID_LARB1(2)
+#define MT2701_M4U_PORT_VDEC_AVC_MV_EXT		MT2701_M4U_ID_LARB1(3)
+#define MT2701_M4U_PORT_VDEC_PRED_RD_EXT	MT2701_M4U_ID_LARB1(4)
+#define MT2701_M4U_PORT_VDEC_PRED_WR_EXT	MT2701_M4U_ID_LARB1(5)
+#define MT2701_M4U_PORT_VDEC_VLD_EXT		MT2701_M4U_ID_LARB1(6)
+#define MT2701_M4U_PORT_VDEC_VLD2_EXT		MT2701_M4U_ID_LARB1(7)
+#define MT2701_M4U_PORT_VDEC_TILE_EXT		MT2701_M4U_ID_LARB1(8)
+#define MT2701_M4U_PORT_VDEC_IMG_RESZ_EXT	MT2701_M4U_ID_LARB1(9)
+
+/* Port define for larb2 */
+#define MT2701_M4U_PORT_VENC_RCPU		MT2701_M4U_ID_LARB2(0)
+#define MT2701_M4U_PORT_VENC_REC_FRM		MT2701_M4U_ID_LARB2(1)
+#define MT2701_M4U_PORT_VENC_BSDMA		MT2701_M4U_ID_LARB2(2)
+#define MT2701_M4U_PORT_JPGENC_RDMA		MT2701_M4U_ID_LARB2(3)
+#define MT2701_M4U_PORT_VENC_LT_RCPU		MT2701_M4U_ID_LARB2(4)
+#define MT2701_M4U_PORT_VENC_LT_REC_FRM		MT2701_M4U_ID_LARB2(5)
+#define MT2701_M4U_PORT_VENC_LT_BSDMA		MT2701_M4U_ID_LARB2(6)
+#define MT2701_M4U_PORT_JPGDEC_BSDMA		MT2701_M4U_ID_LARB2(7)
+#define MT2701_M4U_PORT_VENC_SV_COMV		MT2701_M4U_ID_LARB2(8)
+#define MT2701_M4U_PORT_VENC_RD_COMV		MT2701_M4U_ID_LARB2(9)
+#define MT2701_M4U_PORT_JPGENC_BSDMA		MT2701_M4U_ID_LARB2(10)
+#define MT2701_M4U_PORT_VENC_CUR_LUMA		MT2701_M4U_ID_LARB2(11)
+#define MT2701_M4U_PORT_VENC_CUR_CHROMA		MT2701_M4U_ID_LARB2(12)
+#define MT2701_M4U_PORT_VENC_REF_LUMA		MT2701_M4U_ID_LARB2(13)
+#define MT2701_M4U_PORT_VENC_REF_CHROMA		MT2701_M4U_ID_LARB2(14)
+#define MT2701_M4U_PORT_IMG_RESZ		MT2701_M4U_ID_LARB2(15)
+#define MT2701_M4U_PORT_VENC_LT_SV_COMV		MT2701_M4U_ID_LARB2(16)
+#define MT2701_M4U_PORT_VENC_LT_RD_COMV		MT2701_M4U_ID_LARB2(17)
+#define MT2701_M4U_PORT_VENC_LT_CUR_LUMA	MT2701_M4U_ID_LARB2(18)
+#define MT2701_M4U_PORT_VENC_LT_CUR_CHROMA	MT2701_M4U_ID_LARB2(19)
+#define MT2701_M4U_PORT_VENC_LT_REF_LUMA	MT2701_M4U_ID_LARB2(20)
+#define MT2701_M4U_PORT_VENC_LT_REF_CHROMA	MT2701_M4U_ID_LARB2(21)
+#define MT2701_M4U_PORT_JPGDEC_WDMA		MT2701_M4U_ID_LARB2(22)
+
+#endif