Merge tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM SoC driver updates from Olof Johansson:
 "Driver updates for v4.1.  Some of these are for drivers/soc, where we
  find more and more SoC-specific drivers these days.  Some are for
  other driver subsystems where we have received acks from the
  appropriate maintainers.

  The larger parts of this branch are:

   - MediaTek support for their PMIC wrapper interface, a high-level
     interface for talking to the system PMIC over a dedicated I2C
     interface.

   - Qualcomm SCM driver has been moved to drivers/firmware.  It's used
     for CPU up/down and needs to be in a shared location for arm/arm64
     common code.

   - cleanup of ARM-CCI PMU code.

   - another set of cleanusp to the OMAP GPMC code"

* tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (43 commits)
  soc/mediatek: Remove unused variables
  clocksource: atmel-st: select MFD_SYSCON
  soc: mediatek: Add PMIC wrapper for MT8135 and MT8173 SoCs
  arm-cci: Fix CCI PMU event validation
  arm-cci: Split the code for PMU vs driver support
  arm-cci: Get rid of secure transactions for PMU driver
  arm-cci: Abstract the CCI400 PMU specific definitions
  arm-cci: Rearrange code for splitting PMU vs driver code
  drivers: cci: reject groups spanning multiple HW PMUs
  ARM: at91: remove useless include
  clocksource: atmel-st: remove mach/hardware dependency
  clocksource: atmel-st: use syscon/regmap
  ARM: at91: time: move the system timer driver to drivers/clocksource
  ARM: at91: properly initialize timer
  ARM: at91: at91rm9200: remove deprecated arm_pm_restart
  watchdog: at91rm9200: implement restart handler
  watchdog: at91rm9200: use the system timer syscon
  mfd: syscon: Add atmel system timer registers definition
  ARM: at91/dt: declare atmel,at91rm9200-st as a syscon
  soc: qcom: gsbi: Add support for ADM CRCI muxing
  ...

Documentation/devicetree/bindings/arm/atmel-at91.txt

@@ -46,10 +46,12 @@ PIT Timer required properties:
   shared across all System Controller members.
 
 System Timer (ST) required properties:
-- compatible: Should be "atmel,at91rm9200-st"
+- compatible: Should be "atmel,at91rm9200-st", "syscon", "simple-mfd"
 - reg: Should contain registers location and length
 - interrupts: Should contain interrupt for the ST which is the IRQ line
   shared across all System Controller members.
+Its subnodes can be:
+- watchdog: compatible should be "atmel,at91rm9200-wdt"
 
 TC/TCLIB Timer required properties:
 - compatible: Should be "atmel,<chip>-tcb".

Documentation/devicetree/bindings/arm/cci.txt

@@ -94,8 +94,11 @@ specific to ARM.
 		- compatible
 			Usage: required
 			Value type: <string>
-			Definition: must be "arm,cci-400-pmu"
-
+			Definition: Must contain one of:
+				 "arm,cci-400-pmu,r0"
+				 "arm,cci-400-pmu,r1"
+				 "arm,cci-400-pmu"  - DEPRECATED, permitted only where OS has
+						      secure acces to CCI registers
 		- reg:
 			Usage: required
 			Value type: Integer cells. A register entry, expressed

Documentation/devicetree/bindings/bus/renesas,bsc.txt

@@ -0,0 +1,46 @@
+Renesas Bus State Controller (BSC)
+==================================
+
+The Renesas Bus State Controller (BSC, sometimes called "LBSC within Bus
+Bridge", or "External Bus Interface") can be found in several Renesas ARM SoCs.
+It provides an external bus for connecting multiple external devices to the
+SoC, driving several chip select lines, for e.g. NOR FLASH, Ethernet and USB.
+
+While the BSC is a fairly simple memory-mapped bus, it may be part of a PM
+domain, and may have a gateable functional clock.
+Before a device connected to the BSC can be accessed, the PM domain
+containing the BSC must be powered on, and the functional clock
+driving the BSC must be enabled.
+
+The bindings for the BSC extend the bindings for "simple-pm-bus".
+
+
+Required properties
+  - compatible: Must contain an SoC-specific value, and "renesas,bsc" and
+		"simple-pm-bus" as fallbacks.
+                SoC-specific values can be:
+		"renesas,bsc-r8a73a4" for R-Mobile APE6 (r8a73a4)
+		"renesas,bsc-sh73a0" for SH-Mobile AG5 (sh73a0)
+  - #address-cells, #size-cells, ranges: Must describe the mapping between
+		parent address and child address spaces.
+  - reg: Must contain the base address and length to access the bus controller.
+
+Optional properties:
+  - interrupts: Must contain a reference to the BSC interrupt, if available.
+  - clocks: Must contain a reference to the functional clock, if available.
+  - power-domains: Must contain a reference to the PM domain, if available.
+
+
+Example:
+
+	bsc: bus@fec10000 {
+		compatible = "renesas,bsc-sh73a0", "renesas,bsc",
+			     "simple-pm-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0 0 0x20000000>;
+		reg = <0xfec10000 0x400>;
+		interrupts = <0 39 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&zb_clk>;
+		power-domains = <&pd_a4s>;
+	};

Documentation/devicetree/bindings/bus/simple-pm-bus.txt

@@ -0,0 +1,44 @@
+Simple Power-Managed Bus
+========================
+
+A Simple Power-Managed Bus is a transparent bus that doesn't need a real
+driver, as it's typically initialized by the boot loader.
+
+However, its bus controller is part of a PM domain, or under the control of a
+functional clock.  Hence, the bus controller's PM domain and/or clock must be
+enabled for child devices connected to the bus (either on-SoC or externally)
+to function.
+
+While "simple-pm-bus" follows the "simple-bus" set of properties, as specified
+in ePAPR, it is not an extension of "simple-bus".
+
+
+Required properties:
+  - compatible: Must contain at least "simple-pm-bus".
+		Must not contain "simple-bus".
+		It's recommended to let this be preceded by one or more
+		vendor-specific compatible values.
+  - #address-cells, #size-cells, ranges: Must describe the mapping between
+		parent address and child address spaces.
+
+Optional platform-specific properties for clock or PM domain control (at least
+one of them is required):
+  - clocks: Must contain a reference to the functional clock(s),
+  - power-domains: Must contain a reference to the PM domain.
+Please refer to the binding documentation for the clock and/or PM domain
+providers for more details.
+
+
+Example:
+
+	bsc: bus@fec10000 {
+		compatible = "renesas,bsc-sh73a0", "renesas,bsc",
+			     "simple-pm-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0 0 0x20000000>;
+		reg = <0xfec10000 0x400>;
+		interrupts = <0 39 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&zb_clk>;
+		power-domains = <&pd_a4s>;
+	};

Documentation/devicetree/bindings/soc/qcom/qcom,gsbi.txt

@@ -6,7 +6,8 @@ configuration settings.  The mode setting will govern the input/output mode of
 the 4 GSBI IOs.
 
 Required properties:
-- compatible: must contain "qcom,gsbi-v1.0.0" for APQ8064/IPQ8064
+- compatible:	Should contain "qcom,gsbi-v1.0.0"
+- cell-index:	Should contain the GSBI index
 - reg: Address range for GSBI registers
 - clocks: required clock
 - clock-names: must contain "iface" entry
@@ -16,6 +17,8 @@ Required properties:
 Optional properties:
 - qcom,crci : indicates CRCI MUX value for QUP CRCI ports.  Please reference
   dt-bindings/soc/qcom,gsbi.h for valid CRCI mux values.
+- syscon-tcsr: indicates phandle of TCSR syscon node.  Required if child uses
+  dma.
 
 Required properties if child node exists:
 - #address-cells: Must be 1
@@ -39,6 +42,7 @@ Example for APQ8064:
 
 	gsbi4@16300000 {
 		compatible = "qcom,gsbi-v1.0.0";
+		cell-index = <4>;
 		reg = <0x16300000 0x100>;
 		clocks = <&gcc GSBI4_H_CLK>;
 		clock-names = "iface";
@@ -48,22 +52,24 @@ Example for APQ8064:
 		qcom,mode = <GSBI_PROT_I2C_UART>;
 		qcom,crci = <GSBI_CRCI_QUP>;
 
+		syscon-tcsr = <&tcsr>;
+
 		/* child nodes go under here */
 
 		i2c_qup4: i2c@16380000 {
-		        compatible = "qcom,i2c-qup-v1.1.1";
-		        reg = <0x16380000 0x1000>;
-		        interrupts = <0 153 0>;
+			compatible = "qcom,i2c-qup-v1.1.1";
+			reg = <0x16380000 0x1000>;
+			interrupts = <0 153 0>;
 
-		        clocks = <&gcc GSBI4_QUP_CLK>, <&gcc GSBI4_H_CLK>;
-		        clock-names = "core", "iface";
+			clocks = <&gcc GSBI4_QUP_CLK>, <&gcc GSBI4_H_CLK>;
+			clock-names = "core", "iface";
 
-		        clock-frequency = <200000>;
+			clock-frequency = <200000>;
 
-		        #address-cells = <1>;
-		        #size-cells = <0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
 
-		 };
+		};
 
 		uart4:	serial@16340000 {
 			compatible = "qcom,msm-uartdm-v1.3", "qcom,msm-uartdm";
@@ -76,3 +82,7 @@ Example for APQ8064:
 		};
 	};
 
+	tcsr: syscon@1a400000 {
+		compatible = "qcom,apq8064-tcsr", "syscon";
+		reg = <0x1a400000 0x100>;
+	};

MAINTAINERS

@@ -1327,6 +1327,7 @@ F:	drivers/tty/serial/msm_serial.h
 F:	drivers/tty/serial/msm_serial.c
 F:	drivers/*/pm8???-*
 F:	drivers/mfd/ssbi.c
+F:	drivers/firmware/qcom_scm.c
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/galak/linux-qcom.git
 
 ARM/RADISYS ENP2611 MACHINE SUPPORT

arch/arm/Kconfig

@@ -2146,6 +2146,8 @@ source "net/Kconfig"
 
 source "drivers/Kconfig"
 
+source "drivers/firmware/Kconfig"
+
 source "fs/Kconfig"
 
 source "arch/arm/Kconfig.debug"

arch/arm/boot/dts/at91rm9200.dtsi

@@ -356,9 +356,13 @@
 			};
 
 			st: timer@fffffd00 {
-				compatible = "atmel,at91rm9200-st";
+				compatible = "atmel,at91rm9200-st", "syscon", "simple-mfd";
 				reg = <0xfffffd00 0x100>;
 				interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
+
+				watchdog {
+					compatible = "atmel,at91rm9200-wdt";
+				};
 			};
 
 			rtc: rtc@fffffe00 {

arch/arm/include/asm/arm-cci.h

@@ -0,0 +1,42 @@
+/*
+ * arch/arm/include/asm/arm-cci.h
+ *
+ * Copyright (C) 2015 ARM Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#ifndef __ASM_ARM_CCI_H
+#define __ASM_ARM_CCI_H
+
+#ifdef CONFIG_MCPM
+#include <asm/mcpm.h>
+
+/*
+ * We don't have a reliable way of detecting whether,
+ * if we have access to secure-only registers, unless
+ * mcpm is registered.
+ */
+static inline bool platform_has_secure_cci_access(void)
+{
+	return mcpm_is_available();
+}
+
+#else
+static inline bool platform_has_secure_cci_access(void)
+{
+	return false;
+}
+#endif
+
+#endif

arch/arm/mach-at91/Kconfig

@@ -77,6 +77,7 @@ if SOC_SAM_V4_V5
 config SOC_AT91RM9200
 	bool "AT91RM9200"
 	select ATMEL_AIC_IRQ
+	select ATMEL_ST
 	select COMMON_CLK_AT91
 	select CPU_ARM920T
 	select GENERIC_CLOCKEVENTS

arch/arm/mach-at91/Makefile

@@ -7,7 +7,7 @@ obj-y		:= soc.o
 obj-$(CONFIG_SOC_AT91SAM9)	+= sam9_smc.o
 
 # CPU-specific support
-obj-$(CONFIG_SOC_AT91RM9200)	+= at91rm9200.o at91rm9200_time.o
+obj-$(CONFIG_SOC_AT91RM9200)	+= at91rm9200.o
 obj-$(CONFIG_SOC_AT91SAM9)	+= at91sam9.o
 obj-$(CONFIG_SOC_SAMA5)		+= sama5.o
 

arch/arm/mach-at91/at91rm9200.c

@@ -15,8 +15,6 @@
 #include <asm/mach/arch.h>
 #include <asm/system_misc.h>
 
-#include <mach/at91_st.h>
-
 #include "generic.h"
 #include "soc.h"
 
@@ -25,21 +23,6 @@ static const struct at91_soc rm9200_socs[] = {
 	{ /* sentinel */ },
 };
 
-static void at91rm9200_restart(enum reboot_mode reboot_mode, const char *cmd)
-{
-	/*
-	 * Perform a hardware reset with the use of the Watchdog timer.
-	 */
-	at91_st_write(AT91_ST_WDMR, AT91_ST_RSTEN | AT91_ST_EXTEN | 1);
-	at91_st_write(AT91_ST_CR, AT91_ST_WDRST);
-}
-
-static void __init at91rm9200_dt_timer_init(void)
-{
-	of_clk_init(NULL);
-	at91rm9200_timer_init();
-}
-
 static void __init at91rm9200_dt_device_init(void)
 {
 	struct soc_device *soc;
@@ -52,7 +35,6 @@ static void __init at91rm9200_dt_device_init(void)
 	of_platform_populate(NULL, of_default_bus_match_table, NULL, soc_dev);
 
 	arm_pm_idle = at91rm9200_idle;
-	arm_pm_restart = at91rm9200_restart;
 	at91rm9200_pm_init();
 }
 
@@ -62,7 +44,6 @@ static const char *at91rm9200_dt_board_compat[] __initconst = {
 };
 
 DT_MACHINE_START(at91rm9200_dt, "Atmel AT91RM9200")
-	.init_time      = at91rm9200_dt_timer_init,
 	.init_machine	= at91rm9200_dt_device_init,
 	.dt_compat	= at91rm9200_dt_board_compat,
 MACHINE_END

arch/arm/mach-at91/generic.h

@@ -18,9 +18,6 @@
 extern void __init at91_map_io(void);
 extern void __init at91_alt_map_io(void);
 
- /* Timer */
-extern void at91rm9200_timer_init(void);
-
 /* idle */
 extern void at91rm9200_idle(void);
 extern void at91sam9_idle(void);

arch/arm/mach-at91/include/mach/at91_st.h

@@ -1,61 +0,0 @@
-/*
- * arch/arm/mach-at91/include/mach/at91_st.h
- *
- * Copyright (C) 2005 Ivan Kokshaysky
- * Copyright (C) SAN People
- *
- * System Timer (ST) - System peripherals registers.
- * Based on AT91RM9200 datasheet revision E.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-#ifndef AT91_ST_H
-#define AT91_ST_H
-
-#ifndef __ASSEMBLY__
-extern void __iomem *at91_st_base;
-
-#define at91_st_read(field) \
-	__raw_readl(at91_st_base + field)
-
-#define at91_st_write(field, value) \
-	__raw_writel(value, at91_st_base + field)
-#else
-.extern at91_st_base
-#endif
-
-#define	AT91_ST_CR		0x00			/* Control Register */
-#define 	AT91_ST_WDRST		(1 << 0)		/* Watchdog Timer Restart */
-
-#define	AT91_ST_PIMR		0x04			/* Period Interval Mode Register */
-#define		AT91_ST_PIV		(0xffff <<  0)		/* Period Interval Value */
-
-#define	AT91_ST_WDMR		0x08			/* Watchdog Mode Register */
-#define		AT91_ST_WDV		(0xffff <<  0)		/* Watchdog Counter Value */
-#define		AT91_ST_RSTEN		(1	<< 16)		/* Reset Enable */
-#define		AT91_ST_EXTEN		(1	<< 17)		/* External Signal Assertion Enable */
-
-#define	AT91_ST_RTMR		0x0c			/* Real-time Mode Register */
-#define		AT91_ST_RTPRES		(0xffff <<  0)		/* Real-time Prescalar Value */
-
-#define	AT91_ST_SR		0x10			/* Status Register */
-#define		AT91_ST_PITS		(1 << 0)		/* Period Interval Timer Status */
-#define		AT91_ST_WDOVF		(1 << 1) 		/* Watchdog Overflow */
-#define		AT91_ST_RTTINC		(1 << 2) 		/* Real-time Timer Increment */
-#define		AT91_ST_ALMS		(1 << 3) 		/* Alarm Status */
-
-#define	AT91_ST_IER		0x14			/* Interrupt Enable Register */
-#define	AT91_ST_IDR		0x18			/* Interrupt Disable Register */
-#define	AT91_ST_IMR		0x1c			/* Interrupt Mask Register */
-
-#define	AT91_ST_RTAR		0x20			/* Real-time Alarm Register */
-#define		AT91_ST_ALMV		(0xfffff << 0)		/* Alarm Value */
-
-#define	AT91_ST_CRTR		0x24			/* Current Real-time Register */
-#define		AT91_ST_CRTV		(0xfffff << 0)		/* Current Real-Time Value */
-
-#endif

arch/arm/mach-exynos/Kconfig

@@ -123,7 +123,7 @@ config SOC_EXYNOS5800
 config EXYNOS5420_MCPM
 	bool "Exynos5420 Multi-Cluster PM support"
 	depends on MCPM && SOC_EXYNOS5420
-	select ARM_CCI
+	select ARM_CCI400_PORT_CTRL
 	select ARM_CPU_SUSPEND
 	help
 	  This is needed to provide CPU and cluster power management

arch/arm/mach-mediatek/Kconfig

@@ -1,6 +1,7 @@
 menuconfig ARCH_MEDIATEK
 	bool "Mediatek MT65xx & MT81xx SoC" if ARCH_MULTI_V7
 	select ARM_GIC
+	select PINCTRL
 	select MTK_TIMER
 	help
 	  Support for Mediatek MT65xx & MT81xx SoCs

arch/arm/mach-omap2/gpmc-nand.c

@@ -96,14 +96,6 @@ int gpmc_nand_init(struct omap_nand_platform_data *gpmc_nand_data,
 	gpmc_nand_res[1].start = gpmc_get_client_irq(GPMC_IRQ_FIFOEVENTENABLE);
 	gpmc_nand_res[2].start = gpmc_get_client_irq(GPMC_IRQ_COUNT_EVENT);
 
-	if (gpmc_t) {
-		err = gpmc_cs_set_timings(gpmc_nand_data->cs, gpmc_t);
-		if (err < 0) {
-			pr_err("omap2-gpmc: Unable to set gpmc timings: %d\n", err);
-			return err;
-		}
-	}
-
 	memset(&s, 0, sizeof(struct gpmc_settings));
 	if (gpmc_nand_data->of_node)
 		gpmc_read_settings_dt(gpmc_nand_data->of_node, &s);
@@ -111,6 +103,16 @@ int gpmc_nand_init(struct omap_nand_platform_data *gpmc_nand_data,
 		gpmc_set_legacy(gpmc_nand_data, &s);
 
 	s.device_nand = true;
+
+	if (gpmc_t) {
+		err = gpmc_cs_set_timings(gpmc_nand_data->cs, gpmc_t, &s);
+		if (err < 0) {
+			pr_err("omap2-gpmc: Unable to set gpmc timings: %d\n",
+			       err);
+			return err;
+		}
+	}
+
 	err = gpmc_cs_program_settings(gpmc_nand_data->cs, &s);
 	if (err < 0)
 		goto out_free_cs;

arch/arm/mach-omap2/gpmc-onenand.c

@@ -293,7 +293,7 @@ static int omap2_onenand_setup_async(void __iomem *onenand_base)
 	if (ret < 0)
 		return ret;
 
-	ret = gpmc_cs_set_timings(gpmc_onenand_data->cs, &t);
+	ret = gpmc_cs_set_timings(gpmc_onenand_data->cs, &t, &onenand_async);
 	if (ret < 0)
 		return ret;
 
@@ -331,7 +331,7 @@ static int omap2_onenand_setup_sync(void __iomem *onenand_base, int *freq_ptr)
 	if (ret < 0)
 		return ret;
 
-	ret = gpmc_cs_set_timings(gpmc_onenand_data->cs, &t);
+	ret = gpmc_cs_set_timings(gpmc_onenand_data->cs, &t, &onenand_sync);
 	if (ret < 0)
 		return ret;
 

arch/arm/mach-omap2/usb-tusb6010.c

@@ -71,7 +71,7 @@ static int tusb_set_async_mode(unsigned sysclk_ps)
 
 	gpmc_calc_timings(&t, &tusb_async, &dev_t);
 
-	return gpmc_cs_set_timings(async_cs, &t);
+	return gpmc_cs_set_timings(async_cs, &t, &tusb_async);
 }
 
 static int tusb_set_sync_mode(unsigned sysclk_ps)
@@ -98,7 +98,7 @@ static int tusb_set_sync_mode(unsigned sysclk_ps)
 
 	gpmc_calc_timings(&t, &tusb_sync, &dev_t);
 
-	return gpmc_cs_set_timings(sync_cs, &t);
+	return gpmc_cs_set_timings(sync_cs, &t, &tusb_sync);
 }
 
 /* tusb driver calls this when it changes the chip's clocking */

arch/arm/mach-qcom/Kconfig

@@ -22,7 +22,4 @@ config ARCH_MSM8974
 	bool "Enable support for MSM8974"
 	select HAVE_ARM_ARCH_TIMER
 
-config QCOM_SCM
-	bool
-
 endif

arch/arm/mach-qcom/Makefile

@@ -1,5 +1,2 @@
 obj-y			:= board.o
 obj-$(CONFIG_SMP)	+= platsmp.o
-obj-$(CONFIG_QCOM_SCM)	+= scm.o scm-boot.o
-
-CFLAGS_scm.o :=$(call as-instr,.arch_extension sec,-DREQUIRES_SEC=1)

arch/arm/mach-qcom/platsmp.c

@@ -17,10 +17,10 @@
 #include <linux/of_address.h>
 #include <linux/smp.h>
 #include <linux/io.h>
+#include <linux/qcom_scm.h>
 
 #include <asm/smp_plat.h>
 
-#include "scm-boot.h"
 
 #define VDD_SC1_ARRAY_CLAMP_GFS_CTL	0x35a0
 #define SCSS_CPU1CORE_RESET		0x2d80
@@ -319,25 +319,10 @@ static int kpssv2_boot_secondary(unsigned int cpu, struct task_struct *idle)
 
 static void __init qcom_smp_prepare_cpus(unsigned int max_cpus)
 {
-	int cpu, map;
-	unsigned int flags = 0;
-	static const int cold_boot_flags[] = {
-		0,
-		SCM_FLAG_COLDBOOT_CPU1,
-		SCM_FLAG_COLDBOOT_CPU2,
-		SCM_FLAG_COLDBOOT_CPU3,
-	};
-
-	for_each_present_cpu(cpu) {
-		map = cpu_logical_map(cpu);
-		if (WARN_ON(map >= ARRAY_SIZE(cold_boot_flags))) {
-			set_cpu_present(cpu, false);
-			continue;
-		}
-		flags |= cold_boot_flags[map];
-	}
+	int cpu;
 
-	if (scm_set_boot_addr(virt_to_phys(secondary_startup_arm), flags)) {
+	if (qcom_scm_set_cold_boot_addr(secondary_startup_arm,
+					cpu_present_mask)) {
 		for_each_present_cpu(cpu) {
 			if (cpu == smp_processor_id())
 				continue;

arch/arm/mach-qcom/scm-boot.c

@@ -1,39 +0,0 @@
-/* Copyright (c) 2010, Code Aurora Forum. All rights reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 and
- * only version 2 as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
- * 02110-1301, USA.
- */
-
-#include <linux/module.h>
-#include <linux/slab.h>
-
-#include "scm.h"
-#include "scm-boot.h"
-
-/*
- * Set the cold/warm boot address for one of the CPU cores.
- */
-int scm_set_boot_addr(u32 addr, int flags)
-{
-	struct {
-		__le32 flags;
-		__le32 addr;
-	} cmd;
-
-	cmd.addr = cpu_to_le32(addr);
-	cmd.flags = cpu_to_le32(flags);
-	return scm_call(SCM_SVC_BOOT, SCM_BOOT_ADDR,
-			&cmd, sizeof(cmd), NULL, 0);
-}
-EXPORT_SYMBOL(scm_set_boot_addr);

arch/arm/mach-qcom/scm-boot.h

@@ -1,26 +0,0 @@
-/* Copyright (c) 2010, Code Aurora Forum. All rights reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 and
- * only version 2 as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- */
-#ifndef __MACH_SCM_BOOT_H
-#define __MACH_SCM_BOOT_H
-
-#define SCM_BOOT_ADDR			0x1
-#define SCM_FLAG_COLDBOOT_CPU1		0x01
-#define SCM_FLAG_COLDBOOT_CPU2		0x08
-#define SCM_FLAG_COLDBOOT_CPU3		0x20
-#define SCM_FLAG_WARMBOOT_CPU0		0x04
-#define SCM_FLAG_WARMBOOT_CPU1		0x02
-#define SCM_FLAG_WARMBOOT_CPU2		0x10
-#define SCM_FLAG_WARMBOOT_CPU3		0x40
-
-int scm_set_boot_addr(u32 addr, int flags);
-
-#endif

arch/arm/mach-qcom/scm.c

@@ -1,326 +0,0 @@
-/* Copyright (c) 2010, Code Aurora Forum. All rights reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 and
- * only version 2 as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
- * 02110-1301, USA.
- */
-
-#include <linux/slab.h>
-#include <linux/io.h>
-#include <linux/module.h>
-#include <linux/mutex.h>
-#include <linux/errno.h>
-#include <linux/err.h>
-
-#include <asm/outercache.h>
-#include <asm/cacheflush.h>
-
-#include "scm.h"
-
-#define SCM_ENOMEM		-5
-#define SCM_EOPNOTSUPP		-4
-#define SCM_EINVAL_ADDR		-3
-#define SCM_EINVAL_ARG		-2
-#define SCM_ERROR		-1
-#define SCM_INTERRUPTED		1
-
-static DEFINE_MUTEX(scm_lock);
-
-/**
- * struct scm_command - one SCM command buffer
- * @len: total available memory for command and response
- * @buf_offset: start of command buffer
- * @resp_hdr_offset: start of response buffer
- * @id: command to be executed
- * @buf: buffer returned from scm_get_command_buffer()
- *
- * An SCM command is laid out in memory as follows:
- *
- *	------------------- <--- struct scm_command
- *	| command header  |
- *	------------------- <--- scm_get_command_buffer()
- *	| command buffer  |
- *	------------------- <--- struct scm_response and
- *	| response header |      scm_command_to_response()
- *	------------------- <--- scm_get_response_buffer()
- *	| response buffer |
- *	-------------------
- *
- * There can be arbitrary padding between the headers and buffers so
- * you should always use the appropriate scm_get_*_buffer() routines
- * to access the buffers in a safe manner.
- */
-struct scm_command {
-	__le32 len;
-	__le32 buf_offset;
-	__le32 resp_hdr_offset;
-	__le32 id;
-	__le32 buf[0];
-};
-
-/**
- * struct scm_response - one SCM response buffer
- * @len: total available memory for response
- * @buf_offset: start of response data relative to start of scm_response
- * @is_complete: indicates if the command has finished processing
- */
-struct scm_response {
-	__le32 len;
-	__le32 buf_offset;
-	__le32 is_complete;
-};
-
-/**
- * alloc_scm_command() - Allocate an SCM command
- * @cmd_size: size of the command buffer
- * @resp_size: size of the response buffer
- *
- * Allocate an SCM command, including enough room for the command
- * and response headers as well as the command and response buffers.
- *
- * Returns a valid &scm_command on success or %NULL if the allocation fails.
- */
-static struct scm_command *alloc_scm_command(size_t cmd_size, size_t resp_size)
-{
-	struct scm_command *cmd;
-	size_t len = sizeof(*cmd) + sizeof(struct scm_response) + cmd_size +
-		resp_size;
-	u32 offset;
-
-	cmd = kzalloc(PAGE_ALIGN(len), GFP_KERNEL);
-	if (cmd) {
-		cmd->len = cpu_to_le32(len);
-		offset = offsetof(struct scm_command, buf);
-		cmd->buf_offset = cpu_to_le32(offset);
-		cmd->resp_hdr_offset = cpu_to_le32(offset + cmd_size);
-	}
-	return cmd;
-}
-
-/**
- * free_scm_command() - Free an SCM command
- * @cmd: command to free
- *
- * Free an SCM command.
- */
-static inline void free_scm_command(struct scm_command *cmd)
-{
-	kfree(cmd);
-}
-
-/**
- * scm_command_to_response() - Get a pointer to a scm_response
- * @cmd: command
- *
- * Returns a pointer to a response for a command.
- */
-static inline struct scm_response *scm_command_to_response(
-		const struct scm_command *cmd)
-{
-	return (void *)cmd + le32_to_cpu(cmd->resp_hdr_offset);
-}
-
-/**
- * scm_get_command_buffer() - Get a pointer to a command buffer
- * @cmd: command
- *
- * Returns a pointer to the command buffer of a command.
- */
-static inline void *scm_get_command_buffer(const struct scm_command *cmd)
-{
-	return (void *)cmd->buf;
-}
-
-/**
- * scm_get_response_buffer() - Get a pointer to a response buffer
- * @rsp: response
- *
- * Returns a pointer to a response buffer of a response.
- */
-static inline void *scm_get_response_buffer(const struct scm_response *rsp)
-{
-	return (void *)rsp + le32_to_cpu(rsp->buf_offset);
-}
-
-static int scm_remap_error(int err)
-{
-	pr_err("scm_call failed with error code %d\n", err);
-	switch (err) {
-	case SCM_ERROR:
-		return -EIO;
-	case SCM_EINVAL_ADDR:
-	case SCM_EINVAL_ARG:
-		return -EINVAL;
-	case SCM_EOPNOTSUPP:
-		return -EOPNOTSUPP;
-	case SCM_ENOMEM:
-		return -ENOMEM;
-	}
-	return -EINVAL;
-}
-
-static u32 smc(u32 cmd_addr)
-{
-	int context_id;
-	register u32 r0 asm("r0") = 1;
-	register u32 r1 asm("r1") = (u32)&context_id;
-	register u32 r2 asm("r2") = cmd_addr;
-	do {
-		asm volatile(
-			__asmeq("%0", "r0")
-			__asmeq("%1", "r0")
-			__asmeq("%2", "r1")
-			__asmeq("%3", "r2")
-#ifdef REQUIRES_SEC
-			".arch_extension sec\n"
-#endif
-			"smc	#0	@ switch to secure world\n"
-			: "=r" (r0)
-			: "r" (r0), "r" (r1), "r" (r2)
-			: "r3");
-	} while (r0 == SCM_INTERRUPTED);
-
-	return r0;
-}
-
-static int __scm_call(const struct scm_command *cmd)
-{
-	int ret;
-	u32 cmd_addr = virt_to_phys(cmd);
-
-	/*
-	 * Flush the command buffer so that the secure world sees
-	 * the correct data.
-	 */
-	__cpuc_flush_dcache_area((void *)cmd, cmd->len);
-	outer_flush_range(cmd_addr, cmd_addr + cmd->len);
-
-	ret = smc(cmd_addr);
-	if (ret < 0)
-		ret = scm_remap_error(ret);
-
-	return ret;
-}
-
-static void scm_inv_range(unsigned long start, unsigned long end)
-{
-	u32 cacheline_size, ctr;
-
-	asm volatile("mrc p15, 0, %0, c0, c0, 1" : "=r" (ctr));
-	cacheline_size = 4 << ((ctr >> 16) & 0xf);
-
-	start = round_down(start, cacheline_size);
-	end = round_up(end, cacheline_size);
-	outer_inv_range(start, end);
-	while (start < end) {
-		asm ("mcr p15, 0, %0, c7, c6, 1" : : "r" (start)
-		     : "memory");
-		start += cacheline_size;
-	}
-	dsb();
-	isb();
-}
-
-/**
- * scm_call() - Send an SCM command
- * @svc_id: service identifier
- * @cmd_id: command identifier
- * @cmd_buf: command buffer
- * @cmd_len: length of the command buffer
- * @resp_buf: response buffer
- * @resp_len: length of the response buffer
- *
- * Sends a command to the SCM and waits for the command to finish processing.
- *
- * A note on cache maintenance:
- * Note that any buffers that are expected to be accessed by the secure world
- * must be flushed before invoking scm_call and invalidated in the cache
- * immediately after scm_call returns. Cache maintenance on the command and
- * response buffers is taken care of by scm_call; however, callers are
- * responsible for any other cached buffers passed over to the secure world.
- */
-int scm_call(u32 svc_id, u32 cmd_id, const void *cmd_buf, size_t cmd_len,
-		void *resp_buf, size_t resp_len)
-{
-	int ret;
-	struct scm_command *cmd;
-	struct scm_response *rsp;
-	unsigned long start, end;
-
-	cmd = alloc_scm_command(cmd_len, resp_len);
-	if (!cmd)
-		return -ENOMEM;
-
-	cmd->id = cpu_to_le32((svc_id << 10) | cmd_id);
-	if (cmd_buf)
-		memcpy(scm_get_command_buffer(cmd), cmd_buf, cmd_len);
-
-	mutex_lock(&scm_lock);
-	ret = __scm_call(cmd);
-	mutex_unlock(&scm_lock);
-	if (ret)
-		goto out;
-
-	rsp = scm_command_to_response(cmd);
-	start = (unsigned long)rsp;
-
-	do {
-		scm_inv_range(start, start + sizeof(*rsp));
-	} while (!rsp->is_complete);
-
-	end = (unsigned long)scm_get_response_buffer(rsp) + resp_len;
-	scm_inv_range(start, end);
-
-	if (resp_buf)
-		memcpy(resp_buf, scm_get_response_buffer(rsp), resp_len);
-out:
-	free_scm_command(cmd);
-	return ret;
-}
-EXPORT_SYMBOL(scm_call);
-
-u32 scm_get_version(void)
-{
-	int context_id;
-	static u32 version = -1;
-	register u32 r0 asm("r0");
-	register u32 r1 asm("r1");
-
-	if (version != -1)
-		return version;
-
-	mutex_lock(&scm_lock);
-
-	r0 = 0x1 << 8;
-	r1 = (u32)&context_id;
-	do {
-		asm volatile(
-			__asmeq("%0", "r0")
-			__asmeq("%1", "r1")
-			__asmeq("%2", "r0")
-			__asmeq("%3", "r1")
-#ifdef REQUIRES_SEC
-			".arch_extension sec\n"
-#endif
-			"smc	#0	@ switch to secure world\n"
-			: "=r" (r0), "=r" (r1)
-			: "r" (r0), "r" (r1)
-			: "r2", "r3");
-	} while (r0 == SCM_INTERRUPTED);
-
-	version = r1;
-	mutex_unlock(&scm_lock);
-
-	return version;
-}
-EXPORT_SYMBOL(scm_get_version);

arch/arm/mach-qcom/scm.h

@@ -1,25 +0,0 @@
-/* Copyright (c) 2010, Code Aurora Forum. All rights reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 and
- * only version 2 as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- */
-#ifndef __MACH_SCM_H
-#define __MACH_SCM_H
-
-#define SCM_SVC_BOOT			0x1
-#define SCM_SVC_PIL			0x2
-
-extern int scm_call(u32 svc_id, u32 cmd_id, const void *cmd_buf, size_t cmd_len,
-		void *resp_buf, size_t resp_len);
-
-#define SCM_VERSION(major, minor) (((major) << 16) | ((minor) & 0xFF))
-
-extern u32 scm_get_version(void);
-
-#endif

arch/arm/mach-vexpress/Kconfig

@@ -54,7 +54,7 @@ config ARCH_VEXPRESS_CORTEX_A5_A9_ERRATA
 config ARCH_VEXPRESS_DCSCB
 	bool "Dual Cluster System Control Block (DCSCB) support"
 	depends on MCPM
-	select ARM_CCI
+	select ARM_CCI400_PORT_CTRL
 	help
 	  Support for the Dual Cluster System Configuration Block (DCSCB).
 	  This is needed to provide CPU and cluster power management
@@ -72,7 +72,7 @@ config ARCH_VEXPRESS_SPC
 config ARCH_VEXPRESS_TC2_PM
 	bool "Versatile Express TC2 power management"
 	depends on MCPM
-	select ARM_CCI
+	select ARM_CCI400_PORT_CTRL
 	select ARCH_VEXPRESS_SPC
 	select ARM_CPU_SUSPEND
 	help

arch/arm64/include/asm/arm-cci.h

@@ -0,0 +1,27 @@
+/*
+ * arch/arm64/include/asm/arm-cci.h
+ *
+ * Copyright (C) 2015 ARM Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#ifndef __ASM_ARM_CCI_H
+#define __ASM_ARM_CCI_H
+
+static inline bool platform_has_secure_cci_access(void)
+{
+	return false;
+}
+
+#endif

drivers/bus/Kconfig

@@ -4,6 +4,41 @@
 
 menu "Bus devices"
 
+config ARM_CCI
+	bool
+
+config ARM_CCI400_COMMON
+	bool
+	select ARM_CCI
+
+config ARM_CCI400_PMU
+	bool "ARM CCI400 PMU support"
+	default y
+	depends on ARM || ARM64
+	depends on HW_PERF_EVENTS
+	select ARM_CCI400_COMMON
+	help
+	  Support for PMU events monitoring on the ARM CCI cache coherent
+	  interconnect.
+
+	  If unsure, say Y
+
+config ARM_CCI400_PORT_CTRL
+	bool
+	depends on ARM && OF && CPU_V7
+	select ARM_CCI400_COMMON
+	help
+	  Low level power management driver for CCI400 cache coherent
+	  interconnect for ARM platforms.
+
+config ARM_CCN
+	bool "ARM CCN driver support"
+	depends on ARM || ARM64
+	depends on PERF_EVENTS
+	help
+	  PMU (perf) driver supporting the ARM CCN (Cache Coherent Network)
+	  interconnect.
+
 config BRCMSTB_GISB_ARB
 	bool "Broadcom STB GISB bus arbiter"
 	depends on ARM || MIPS
@@ -40,15 +75,6 @@ config MVEBU_MBUS
 	  Driver needed for the MBus configuration on Marvell EBU SoCs
 	  (Kirkwood, Dove, Orion5x, MV78XX0 and Armada 370/XP).
 
-config OMAP_OCP2SCP
-	tristate "OMAP OCP2SCP DRIVER"
-	depends on ARCH_OMAP2PLUS
-	help
-	  Driver to enable ocp2scp module which transforms ocp interface
-	  protocol to scp protocol. In OMAP4, USB PHY is connected via
-	  OCP2SCP and in OMAP5, both USB PHY and SATA PHY is connected via
-	  OCP2SCP.
-
 config OMAP_INTERCONNECT
 	tristate "OMAP INTERCONNECT DRIVER"
 	depends on ARCH_OMAP2PLUS
@@ -56,20 +82,27 @@ config OMAP_INTERCONNECT
 	help
 	  Driver to enable OMAP interconnect error handling driver.
 
-config ARM_CCI
-	bool "ARM CCI driver support"
-	depends on ARM && OF && CPU_V7
+config OMAP_OCP2SCP
+	tristate "OMAP OCP2SCP DRIVER"
+	depends on ARCH_OMAP2PLUS
 	help
-	  Driver supporting the CCI cache coherent interconnect for ARM
-	  platforms.
+	  Driver to enable ocp2scp module which transforms ocp interface
+	  protocol to scp protocol. In OMAP4, USB PHY is connected via
+	  OCP2SCP and in OMAP5, both USB PHY and SATA PHY is connected via
+	  OCP2SCP.
 
-config ARM_CCN
-	bool "ARM CCN driver support"
-	depends on ARM || ARM64
-	depends on PERF_EVENTS
+config SIMPLE_PM_BUS
+	bool "Simple Power-Managed Bus Driver"
+	depends on OF && PM
+	depends on ARCH_SHMOBILE || COMPILE_TEST
 	help
-	  PMU (perf) driver supporting the ARM CCN (Cache Coherent Network)
-	  interconnect.
+	  Driver for transparent busses that don't need a real driver, but
+	  where the bus controller is part of a PM domain, or under the control
+	  of a functional clock, and thus relies on runtime PM for managing
+	  this PM domain and/or clock.
+	  An example of such a bus controller is the Renesas Bus State
+	  Controller (BSC, sometimes called "LBSC within Bus Bridge", or
+	  "External Bus Interface") as found on several Renesas ARM SoCs.
 
 config VEXPRESS_CONFIG
 	bool "Versatile Express configuration bus"

drivers/bus/Makefile

@@ -2,17 +2,18 @@
 # Makefile for the bus drivers.
 #
 
+# Interconnect bus drivers for ARM platforms
+obj-$(CONFIG_ARM_CCI)		+= arm-cci.o
+obj-$(CONFIG_ARM_CCN)		+= arm-ccn.o
+
 obj-$(CONFIG_BRCMSTB_GISB_ARB)	+= brcmstb_gisb.o
-obj-$(CONFIG_IMX_WEIM)	+= imx-weim.o
-obj-$(CONFIG_MIPS_CDMM) += mips_cdmm.o
-obj-$(CONFIG_MVEBU_MBUS) += mvebu-mbus.o
-obj-$(CONFIG_OMAP_OCP2SCP)	+= omap-ocp2scp.o
+obj-$(CONFIG_IMX_WEIM)		+= imx-weim.o
+obj-$(CONFIG_MIPS_CDMM)		+= mips_cdmm.o
+obj-$(CONFIG_MVEBU_MBUS) 	+= mvebu-mbus.o
 
 # Interconnect bus driver for OMAP SoCs.
 obj-$(CONFIG_OMAP_INTERCONNECT)	+= omap_l3_smx.o omap_l3_noc.o
 
-# Interconnect bus drivers for ARM platforms
-obj-$(CONFIG_ARM_CCI)		+= arm-cci.o
-obj-$(CONFIG_ARM_CCN)		+= arm-ccn.o
-
+obj-$(CONFIG_OMAP_OCP2SCP)	+= omap-ocp2scp.o
+obj-$(CONFIG_SIMPLE_PM_BUS)	+= simple-pm-bus.o
 obj-$(CONFIG_VEXPRESS_CONFIG)	+= vexpress-config.o

drivers/bus/arm-cci.c

@@ -29,41 +29,36 @@
 #include <asm/cacheflush.h>
 #include <asm/smp_plat.h>
 
-#define DRIVER_NAME		"CCI-400"
-#define DRIVER_NAME_PMU		DRIVER_NAME " PMU"
-
-#define CCI_PORT_CTRL		0x0
-#define CCI_CTRL_STATUS		0xc
-
-#define CCI_ENABLE_SNOOP_REQ	0x1
-#define CCI_ENABLE_DVM_REQ	0x2
-#define CCI_ENABLE_REQ		(CCI_ENABLE_SNOOP_REQ | CCI_ENABLE_DVM_REQ)
+static void __iomem *cci_ctrl_base;
+static unsigned long cci_ctrl_phys;
 
+#ifdef CONFIG_ARM_CCI400_PORT_CTRL
 struct cci_nb_ports {
 	unsigned int nb_ace;
 	unsigned int nb_ace_lite;
 };
 
-enum cci_ace_port_type {
-	ACE_INVALID_PORT = 0x0,
-	ACE_PORT,
-	ACE_LITE_PORT,
+static const struct cci_nb_ports cci400_ports = {
+	.nb_ace = 2,
+	.nb_ace_lite = 3
 };
 
-struct cci_ace_port {
-	void __iomem *base;
-	unsigned long phys;
-	enum cci_ace_port_type type;
-	struct device_node *dn;
-};
+#define CCI400_PORTS_DATA	(&cci400_ports)
+#else
+#define CCI400_PORTS_DATA	(NULL)
+#endif
 
-static struct cci_ace_port *ports;
-static unsigned int nb_cci_ports;
+static const struct of_device_id arm_cci_matches[] = {
+#ifdef CONFIG_ARM_CCI400_COMMON
+	{.compatible = "arm,cci-400", .data = CCI400_PORTS_DATA },
+#endif
+	{},
+};
 
-static void __iomem *cci_ctrl_base;
-static unsigned long cci_ctrl_phys;
+#ifdef CONFIG_ARM_CCI400_PMU
 
-#ifdef CONFIG_HW_PERF_EVENTS
+#define DRIVER_NAME		"CCI-400"
+#define DRIVER_NAME_PMU		DRIVER_NAME " PMU"
 
 #define CCI_PMCR		0x0100
 #define CCI_PID2		0x0fe8
@@ -75,20 +70,6 @@ static unsigned long cci_ctrl_phys;
 #define CCI_PID2_REV_MASK	0xf0
 #define CCI_PID2_REV_SHIFT	4
 
-/* Port ids */
-#define CCI_PORT_S0	0
-#define CCI_PORT_S1	1
-#define CCI_PORT_S2	2
-#define CCI_PORT_S3	3
-#define CCI_PORT_S4	4
-#define CCI_PORT_M0	5
-#define CCI_PORT_M1	6
-#define CCI_PORT_M2	7
-
-#define CCI_REV_R0		0
-#define CCI_REV_R1		1
-#define CCI_REV_R1_PX		5
-
 #define CCI_PMU_EVT_SEL		0x000
 #define CCI_PMU_CNTR		0x004
 #define CCI_PMU_CNTR_CTRL	0x008
@@ -100,76 +81,22 @@ static unsigned long cci_ctrl_phys;
 
 #define CCI_PMU_CNTR_MASK	((1ULL << 32) -1)
 
-/*
- * Instead of an event id to monitor CCI cycles, a dedicated counter is
- * provided. Use 0xff to represent CCI cycles and hope that no future revisions
- * make use of this event in hardware.
- */
-enum cci400_perf_events {
-	CCI_PMU_CYCLES = 0xff
-};
-
-#define CCI_PMU_EVENT_MASK		0xff
+#define CCI_PMU_EVENT_MASK		0xffUL
 #define CCI_PMU_EVENT_SOURCE(event)	((event >> 5) & 0x7)
 #define CCI_PMU_EVENT_CODE(event)	(event & 0x1f)
 
 #define CCI_PMU_MAX_HW_EVENTS 5   /* CCI PMU has 4 counters + 1 cycle counter */
 
-#define CCI_PMU_CYCLE_CNTR_IDX		0
-#define CCI_PMU_CNTR0_IDX		1
-#define CCI_PMU_CNTR_LAST(cci_pmu)	(CCI_PMU_CYCLE_CNTR_IDX + cci_pmu->num_events - 1)
-
-/*
- * CCI PMU event id is an 8-bit value made of two parts - bits 7:5 for one of 8
- * ports and bits 4:0 are event codes. There are different event codes
- * associated with each port type.
- *
- * Additionally, the range of events associated with the port types changed
- * between Rev0 and Rev1.
- *
- * The constants below define the range of valid codes for each port type for
- * the different revisions and are used to validate the event to be monitored.
- */
-
-#define CCI_REV_R0_SLAVE_PORT_MIN_EV	0x00
-#define CCI_REV_R0_SLAVE_PORT_MAX_EV	0x13
-#define CCI_REV_R0_MASTER_PORT_MIN_EV	0x14
-#define CCI_REV_R0_MASTER_PORT_MAX_EV	0x1a
-
-#define CCI_REV_R1_SLAVE_PORT_MIN_EV	0x00
-#define CCI_REV_R1_SLAVE_PORT_MAX_EV	0x14
-#define CCI_REV_R1_MASTER_PORT_MIN_EV	0x00
-#define CCI_REV_R1_MASTER_PORT_MAX_EV	0x11
-
-struct pmu_port_event_ranges {
-	u8 slave_min;
-	u8 slave_max;
-	u8 master_min;
-	u8 master_max;
-};
-
-static struct pmu_port_event_ranges port_event_range[] = {
-	[CCI_REV_R0] = {
-		.slave_min = CCI_REV_R0_SLAVE_PORT_MIN_EV,
-		.slave_max = CCI_REV_R0_SLAVE_PORT_MAX_EV,
-		.master_min = CCI_REV_R0_MASTER_PORT_MIN_EV,
-		.master_max = CCI_REV_R0_MASTER_PORT_MAX_EV,
-	},
-	[CCI_REV_R1] = {
-		.slave_min = CCI_REV_R1_SLAVE_PORT_MIN_EV,
-		.slave_max = CCI_REV_R1_SLAVE_PORT_MAX_EV,
-		.master_min = CCI_REV_R1_MASTER_PORT_MIN_EV,
-		.master_max = CCI_REV_R1_MASTER_PORT_MAX_EV,
-	},
+/* Types of interfaces that can generate events */
+enum {
+	CCI_IF_SLAVE,
+	CCI_IF_MASTER,
+	CCI_IF_MAX,
 };
 
-/*
- * Export different PMU names for the different revisions so userspace knows
- * because the event ids are different
- */
-static char *const pmu_names[] = {
-	[CCI_REV_R0] = "CCI_400",
-	[CCI_REV_R1] = "CCI_400_r1",
+struct event_range {
+	u32 min;
+	u32 max;
 };
 
 struct cci_pmu_hw_events {
@@ -178,13 +105,20 @@ struct cci_pmu_hw_events {
 	raw_spinlock_t pmu_lock;
 };
 
+struct cci_pmu_model {
+	char *name;
+	struct event_range event_ranges[CCI_IF_MAX];
+};
+
+static struct cci_pmu_model cci_pmu_models[];
+
 struct cci_pmu {
 	void __iomem *base;
 	struct pmu pmu;
 	int nr_irqs;
 	int irqs[CCI_PMU_MAX_HW_EVENTS];
 	unsigned long active_irqs;
-	struct pmu_port_event_ranges *port_ranges;
+	const struct cci_pmu_model *model;
 	struct cci_pmu_hw_events hw_events;
 	struct platform_device *plat_device;
 	int num_events;
@@ -196,52 +130,63 @@ static struct cci_pmu *pmu;
 
 #define to_cci_pmu(c)	(container_of(c, struct cci_pmu, pmu))
 
-static bool is_duplicate_irq(int irq, int *irqs, int nr_irqs)
-{
-	int i;
-
-	for (i = 0; i < nr_irqs; i++)
-		if (irq == irqs[i])
-			return true;
-
-	return false;
-}
+/* Port ids */
+#define CCI_PORT_S0	0
+#define CCI_PORT_S1	1
+#define CCI_PORT_S2	2
+#define CCI_PORT_S3	3
+#define CCI_PORT_S4	4
+#define CCI_PORT_M0	5
+#define CCI_PORT_M1	6
+#define CCI_PORT_M2	7
 
-static int probe_cci_revision(void)
-{
-	int rev;
-	rev = readl_relaxed(cci_ctrl_base + CCI_PID2) & CCI_PID2_REV_MASK;
-	rev >>= CCI_PID2_REV_SHIFT;
+#define CCI_REV_R0		0
+#define CCI_REV_R1		1
+#define CCI_REV_R1_PX		5
 
-	if (rev < CCI_REV_R1_PX)
-		return CCI_REV_R0;
-	else
-		return CCI_REV_R1;
-}
+/*
+ * Instead of an event id to monitor CCI cycles, a dedicated counter is
+ * provided. Use 0xff to represent CCI cycles and hope that no future revisions
+ * make use of this event in hardware.
+ */
+enum cci400_perf_events {
+	CCI_PMU_CYCLES = 0xff
+};
 
-static struct pmu_port_event_ranges *port_range_by_rev(void)
-{
-	int rev = probe_cci_revision();
+#define CCI_PMU_CYCLE_CNTR_IDX		0
+#define CCI_PMU_CNTR0_IDX		1
+#define CCI_PMU_CNTR_LAST(cci_pmu)	(CCI_PMU_CYCLE_CNTR_IDX + cci_pmu->num_events - 1)
 
-	return &port_event_range[rev];
-}
+/*
+ * CCI PMU event id is an 8-bit value made of two parts - bits 7:5 for one of 8
+ * ports and bits 4:0 are event codes. There are different event codes
+ * associated with each port type.
+ *
+ * Additionally, the range of events associated with the port types changed
+ * between Rev0 and Rev1.
+ *
+ * The constants below define the range of valid codes for each port type for
+ * the different revisions and are used to validate the event to be monitored.
+ */
 
-static int pmu_is_valid_slave_event(u8 ev_code)
-{
-	return pmu->port_ranges->slave_min <= ev_code &&
-		ev_code <= pmu->port_ranges->slave_max;
-}
+#define CCI_REV_R0_SLAVE_PORT_MIN_EV	0x00
+#define CCI_REV_R0_SLAVE_PORT_MAX_EV	0x13
+#define CCI_REV_R0_MASTER_PORT_MIN_EV	0x14
+#define CCI_REV_R0_MASTER_PORT_MAX_EV	0x1a
 
-static int pmu_is_valid_master_event(u8 ev_code)
-{
-	return pmu->port_ranges->master_min <= ev_code &&
-		ev_code <= pmu->port_ranges->master_max;
-}
+#define CCI_REV_R1_SLAVE_PORT_MIN_EV	0x00
+#define CCI_REV_R1_SLAVE_PORT_MAX_EV	0x14
+#define CCI_REV_R1_MASTER_PORT_MIN_EV	0x00
+#define CCI_REV_R1_MASTER_PORT_MAX_EV	0x11
 
-static int pmu_validate_hw_event(u8 hw_event)
+static int pmu_validate_hw_event(unsigned long hw_event)
 {
 	u8 ev_source = CCI_PMU_EVENT_SOURCE(hw_event);
 	u8 ev_code = CCI_PMU_EVENT_CODE(hw_event);
+	int if_type;
+
+	if (hw_event & ~CCI_PMU_EVENT_MASK)
+		return -ENOENT;
 
 	switch (ev_source) {
 	case CCI_PORT_S0:
@@ -250,21 +195,44 @@ static int pmu_validate_hw_event(u8 hw_event)
 	case CCI_PORT_S3:
 	case CCI_PORT_S4:
 		/* Slave Interface */
-		if (pmu_is_valid_slave_event(ev_code))
-			return hw_event;
+		if_type = CCI_IF_SLAVE;
 		break;
 	case CCI_PORT_M0:
 	case CCI_PORT_M1:
 	case CCI_PORT_M2:
 		/* Master Interface */
-		if (pmu_is_valid_master_event(ev_code))
-			return hw_event;
+		if_type = CCI_IF_MASTER;
 		break;
+	default:
+		return -ENOENT;
 	}
 
+	if (ev_code >= pmu->model->event_ranges[if_type].min &&
+		ev_code <= pmu->model->event_ranges[if_type].max)
+		return hw_event;
+
 	return -ENOENT;
 }
 
+static int probe_cci_revision(void)
+{
+	int rev;
+	rev = readl_relaxed(cci_ctrl_base + CCI_PID2) & CCI_PID2_REV_MASK;
+	rev >>= CCI_PID2_REV_SHIFT;
+
+	if (rev < CCI_REV_R1_PX)
+		return CCI_REV_R0;
+	else
+		return CCI_REV_R1;
+}
+
+static const struct cci_pmu_model *probe_cci_model(struct platform_device *pdev)
+{
+	if (platform_has_secure_cci_access())
+		return &cci_pmu_models[probe_cci_revision()];
+	return NULL;
+}
+
 static int pmu_is_valid_counter(struct cci_pmu *cci_pmu, int idx)
 {
 	return CCI_PMU_CYCLE_CNTR_IDX <= idx &&
@@ -293,7 +261,6 @@ static void pmu_enable_counter(int idx)
 
 static void pmu_set_event(int idx, unsigned long event)
 {
-	event &= CCI_PMU_EVENT_MASK;
 	pmu_write_register(event, idx, CCI_PMU_EVT_SEL);
 }
 
@@ -310,7 +277,7 @@ static int pmu_get_event_idx(struct cci_pmu_hw_events *hw, struct perf_event *ev
 {
 	struct cci_pmu *cci_pmu = to_cci_pmu(event->pmu);
 	struct hw_perf_event *hw_event = &event->hw;
-	unsigned long cci_event = hw_event->config_base & CCI_PMU_EVENT_MASK;
+	unsigned long cci_event = hw_event->config_base;
 	int idx;
 
 	if (cci_event == CCI_PMU_CYCLES) {
@@ -331,7 +298,7 @@ static int pmu_get_event_idx(struct cci_pmu_hw_events *hw, struct perf_event *ev
 static int pmu_map_event(struct perf_event *event)
 {
 	int mapping;
-	u8 config = event->attr.config & CCI_PMU_EVENT_MASK;
+	unsigned long config = event->attr.config;
 
 	if (event->attr.type < PERF_TYPE_MAX)
 		return -ENOENT;
@@ -660,12 +627,21 @@ static void cci_pmu_del(struct perf_event *event, int flags)
 }
 
 static int
-validate_event(struct cci_pmu_hw_events *hw_events,
-	       struct perf_event *event)
+validate_event(struct pmu *cci_pmu,
+               struct cci_pmu_hw_events *hw_events,
+               struct perf_event *event)
 {
 	if (is_software_event(event))
 		return 1;
 
+	/*
+	 * Reject groups spanning multiple HW PMUs (e.g. CPU + CCI). The
+	 * core perf code won't check that the pmu->ctx == leader->ctx
+	 * until after pmu->event_init(event).
+	 */
+	if (event->pmu != cci_pmu)
+		return 0;
+
 	if (event->state < PERF_EVENT_STATE_OFF)
 		return 1;
 
@@ -687,15 +663,15 @@ validate_group(struct perf_event *event)
 		.used_mask = CPU_BITS_NONE,
 	};
 
-	if (!validate_event(&fake_pmu, leader))
+	if (!validate_event(event->pmu, &fake_pmu, leader))
 		return -EINVAL;
 
 	list_for_each_entry(sibling, &leader->sibling_list, group_entry) {
-		if (!validate_event(&fake_pmu, sibling))
+		if (!validate_event(event->pmu, &fake_pmu, sibling))
 			return -EINVAL;
 	}
 
-	if (!validate_event(&fake_pmu, event))
+	if (!validate_event(event->pmu, &fake_pmu, event))
 		return -EINVAL;
 
 	return 0;
@@ -831,9 +807,9 @@ static const struct attribute_group *pmu_attr_groups[] = {
 
 static int cci_pmu_init(struct cci_pmu *cci_pmu, struct platform_device *pdev)
 {
-	char *name = pmu_names[probe_cci_revision()];
+	char *name = cci_pmu->model->name;
 	cci_pmu->pmu = (struct pmu) {
-		.name		= pmu_names[probe_cci_revision()],
+		.name		= cci_pmu->model->name,
 		.task_ctx_nr	= perf_invalid_context,
 		.pmu_enable	= cci_pmu_enable,
 		.pmu_disable	= cci_pmu_disable,
@@ -886,22 +862,93 @@ static struct notifier_block cci_pmu_cpu_nb = {
 	.priority	= CPU_PRI_PERF + 1,
 };
 
+static struct cci_pmu_model cci_pmu_models[] = {
+	[CCI_REV_R0] = {
+		.name = "CCI_400",
+		.event_ranges = {
+			[CCI_IF_SLAVE] = {
+				CCI_REV_R0_SLAVE_PORT_MIN_EV,
+				CCI_REV_R0_SLAVE_PORT_MAX_EV,
+			},
+			[CCI_IF_MASTER] = {
+				CCI_REV_R0_MASTER_PORT_MIN_EV,
+				CCI_REV_R0_MASTER_PORT_MAX_EV,
+			},
+		},
+	},
+	[CCI_REV_R1] = {
+		.name = "CCI_400_r1",
+		.event_ranges = {
+			[CCI_IF_SLAVE] = {
+				CCI_REV_R1_SLAVE_PORT_MIN_EV,
+				CCI_REV_R1_SLAVE_PORT_MAX_EV,
+			},
+			[CCI_IF_MASTER] = {
+				CCI_REV_R1_MASTER_PORT_MIN_EV,
+				CCI_REV_R1_MASTER_PORT_MAX_EV,
+			},
+		},
+	},
+};
+
 static const struct of_device_id arm_cci_pmu_matches[] = {
 	{
 		.compatible = "arm,cci-400-pmu",
+		.data	= NULL,
+	},
+	{
+		.compatible = "arm,cci-400-pmu,r0",
+		.data	= &cci_pmu_models[CCI_REV_R0],
+	},
+	{
+		.compatible = "arm,cci-400-pmu,r1",
+		.data	= &cci_pmu_models[CCI_REV_R1],
 	},
 	{},
 };
 
+static inline const struct cci_pmu_model *get_cci_model(struct platform_device *pdev)
+{
+	const struct of_device_id *match = of_match_node(arm_cci_pmu_matches,
+							pdev->dev.of_node);
+	if (!match)
+		return NULL;
+	if (match->data)
+		return match->data;
+
+	dev_warn(&pdev->dev, "DEPRECATED compatible property,"
+			 "requires secure access to CCI registers");
+	return probe_cci_model(pdev);
+}
+
+static bool is_duplicate_irq(int irq, int *irqs, int nr_irqs)
+{
+	int i;
+
+	for (i = 0; i < nr_irqs; i++)
+		if (irq == irqs[i])
+			return true;
+
+	return false;
+}
+
 static int cci_pmu_probe(struct platform_device *pdev)
 {
 	struct resource *res;
 	int i, ret, irq;
+	const struct cci_pmu_model *model;
+
+	model = get_cci_model(pdev);
+	if (!model) {
+		dev_warn(&pdev->dev, "CCI PMU version not supported\n");
+		return -ENODEV;
+	}
 
 	pmu = devm_kzalloc(&pdev->dev, sizeof(*pmu), GFP_KERNEL);
 	if (!pmu)
 		return -ENOMEM;
 
+	pmu->model = model;
 	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
 	pmu->base = devm_ioremap_resource(&pdev->dev, res);
 	if (IS_ERR(pmu->base))
@@ -933,12 +980,6 @@ static int cci_pmu_probe(struct platform_device *pdev)
 		return -EINVAL;
 	}
 
-	pmu->port_ranges = port_range_by_rev();
-	if (!pmu->port_ranges) {
-		dev_warn(&pdev->dev, "CCI PMU version not supported\n");
-		return -EINVAL;
-	}
-
 	raw_spin_lock_init(&pmu->hw_events.pmu_lock);
 	mutex_init(&pmu->reserve_mutex);
 	atomic_set(&pmu->active_events, 0);
@@ -952,6 +993,7 @@ static int cci_pmu_probe(struct platform_device *pdev)
 	if (ret)
 		return ret;
 
+	pr_info("ARM %s PMU driver probed", pmu->model->name);
 	return 0;
 }
 
@@ -963,7 +1005,66 @@ static int cci_platform_probe(struct platform_device *pdev)
 	return of_platform_populate(pdev->dev.of_node, NULL, NULL, &pdev->dev);
 }
 
-#endif /* CONFIG_HW_PERF_EVENTS */
+static struct platform_driver cci_pmu_driver = {
+	.driver = {
+		   .name = DRIVER_NAME_PMU,
+		   .of_match_table = arm_cci_pmu_matches,
+		  },
+	.probe = cci_pmu_probe,
+};
+
+static struct platform_driver cci_platform_driver = {
+	.driver = {
+		   .name = DRIVER_NAME,
+		   .of_match_table = arm_cci_matches,
+		  },
+	.probe = cci_platform_probe,
+};
+
+static int __init cci_platform_init(void)
+{
+	int ret;
+
+	ret = platform_driver_register(&cci_pmu_driver);
+	if (ret)
+		return ret;
+
+	return platform_driver_register(&cci_platform_driver);
+}
+
+#else /* !CONFIG_ARM_CCI400_PMU */
+
+static int __init cci_platform_init(void)
+{
+	return 0;
+}
+
+#endif /* CONFIG_ARM_CCI400_PMU */
+
+#ifdef CONFIG_ARM_CCI400_PORT_CTRL
+
+#define CCI_PORT_CTRL		0x0
+#define CCI_CTRL_STATUS		0xc
+
+#define CCI_ENABLE_SNOOP_REQ	0x1
+#define CCI_ENABLE_DVM_REQ	0x2
+#define CCI_ENABLE_REQ		(CCI_ENABLE_SNOOP_REQ | CCI_ENABLE_DVM_REQ)
+
+enum cci_ace_port_type {
+	ACE_INVALID_PORT = 0x0,
+	ACE_PORT,
+	ACE_LITE_PORT,
+};
+
+struct cci_ace_port {
+	void __iomem *base;
+	unsigned long phys;
+	enum cci_ace_port_type type;
+	struct device_node *dn;
+};
+
+static struct cci_ace_port *ports;
+static unsigned int nb_cci_ports;
 
 struct cpu_port {
 	u64 mpidr;
@@ -1284,36 +1385,20 @@ int notrace __cci_control_port_by_index(u32 port, bool enable)
 }
 EXPORT_SYMBOL_GPL(__cci_control_port_by_index);
 
-static const struct cci_nb_ports cci400_ports = {
-	.nb_ace = 2,
-	.nb_ace_lite = 3
-};
-
-static const struct of_device_id arm_cci_matches[] = {
-	{.compatible = "arm,cci-400", .data = &cci400_ports },
-	{},
-};
-
 static const struct of_device_id arm_cci_ctrl_if_matches[] = {
 	{.compatible = "arm,cci-400-ctrl-if", },
 	{},
 };
 
-static int cci_probe(void)
+static int cci_probe_ports(struct device_node *np)
 {
 	struct cci_nb_ports const *cci_config;
 	int ret, i, nb_ace = 0, nb_ace_lite = 0;
-	struct device_node *np, *cp;
+	struct device_node *cp;
 	struct resource res;
 	const char *match_str;
 	bool is_ace;
 
-	np = of_find_matching_node(NULL, arm_cci_matches);
-	if (!np)
-		return -ENODEV;
-
-	if (!of_device_is_available(np))
-		return -ENODEV;
 
 	cci_config = of_match_node(arm_cci_matches, np)->data;
 	if (!cci_config)
@@ -1325,17 +1410,6 @@ static int cci_probe(void)
 	if (!ports)
 		return -ENOMEM;
 
-	ret = of_address_to_resource(np, 0, &res);
-	if (!ret) {
-		cci_ctrl_base = ioremap(res.start, resource_size(&res));
-		cci_ctrl_phys =	res.start;
-	}
-	if (ret || !cci_ctrl_base) {
-		WARN(1, "unable to ioremap CCI ctrl\n");
-		ret = -ENXIO;
-		goto memalloc_err;
-	}
-
 	for_each_child_of_node(np, cp) {
 		if (!of_match_node(arm_cci_ctrl_if_matches, cp))
 			continue;
@@ -1395,12 +1469,37 @@ static int cci_probe(void)
 	sync_cache_w(&cpu_port);
 	__sync_cache_range_w(ports, sizeof(*ports) * nb_cci_ports);
 	pr_info("ARM CCI driver probed\n");
+
 	return 0;
+}
+#else /* !CONFIG_ARM_CCI400_PORT_CTRL */
+static inline int cci_probe_ports(struct device_node *np)
+{
+	return 0;
+}
+#endif /* CONFIG_ARM_CCI400_PORT_CTRL */
 
-memalloc_err:
+static int cci_probe(void)
+{
+	int ret;
+	struct device_node *np;
+	struct resource res;
+
+	np = of_find_matching_node(NULL, arm_cci_matches);
+	if(!np || !of_device_is_available(np))
+		return -ENODEV;
 
-	kfree(ports);
-	return ret;
+	ret = of_address_to_resource(np, 0, &res);
+	if (!ret) {
+		cci_ctrl_base = ioremap(res.start, resource_size(&res));
+		cci_ctrl_phys =	res.start;
+	}
+	if (ret || !cci_ctrl_base) {
+		WARN(1, "unable to ioremap CCI ctrl\n");
+		return -ENXIO;
+	}
+
+	return cci_probe_ports(np);
 }
 
 static int cci_init_status = -EAGAIN;
@@ -1418,42 +1517,6 @@ static int cci_init(void)
 	return cci_init_status;
 }
 
-#ifdef CONFIG_HW_PERF_EVENTS
-static struct platform_driver cci_pmu_driver = {
-	.driver = {
-		   .name = DRIVER_NAME_PMU,
-		   .of_match_table = arm_cci_pmu_matches,
-		  },
-	.probe = cci_pmu_probe,
-};
-
-static struct platform_driver cci_platform_driver = {
-	.driver = {
-		   .name = DRIVER_NAME,
-		   .of_match_table = arm_cci_matches,
-		  },
-	.probe = cci_platform_probe,
-};
-
-static int __init cci_platform_init(void)
-{
-	int ret;
-
-	ret = platform_driver_register(&cci_pmu_driver);
-	if (ret)
-		return ret;
-
-	return platform_driver_register(&cci_platform_driver);
-}
-
-#else
-
-static int __init cci_platform_init(void)
-{
-	return 0;
-}
-
-#endif
 /*
  * To sort out early init calls ordering a helper function is provided to
  * check if the CCI driver has beed initialized. Function check if the driver

drivers/bus/simple-pm-bus.c

@@ -0,0 +1,58 @@
+/*
+ * Simple Power-Managed Bus Driver
+ *
+ * Copyright (C) 2014-2015 Glider bvba
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+
+#include <linux/module.h>
+#include <linux/of_platform.h>
+#include <linux/platform_device.h>
+#include <linux/pm_runtime.h>
+
+
+static int simple_pm_bus_probe(struct platform_device *pdev)
+{
+	struct device_node *np = pdev->dev.of_node;
+
+	dev_dbg(&pdev->dev, "%s\n", __func__);
+
+	pm_runtime_enable(&pdev->dev);
+
+	if (np)
+		of_platform_populate(np, NULL, NULL, &pdev->dev);
+
+	return 0;
+}
+
+static int simple_pm_bus_remove(struct platform_device *pdev)
+{
+	dev_dbg(&pdev->dev, "%s\n", __func__);
+
+	pm_runtime_disable(&pdev->dev);
+	return 0;
+}
+
+static const struct of_device_id simple_pm_bus_of_match[] = {
+	{ .compatible = "simple-pm-bus", },
+	{ /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(of, simple_pm_bus_of_match);
+
+static struct platform_driver simple_pm_bus_driver = {
+	.probe = simple_pm_bus_probe,
+	.remove = simple_pm_bus_remove,
+	.driver = {
+		.name = "simple-pm-bus",
+		.of_match_table = simple_pm_bus_of_match,
+	},
+};
+
+module_platform_driver(simple_pm_bus_driver);
+
+MODULE_DESCRIPTION("Simple Power-Managed Bus Driver");
+MODULE_AUTHOR("Geert Uytterhoeven <geert+renesas@glider.be>");
+MODULE_LICENSE("GPL v2");

drivers/clocksource/Kconfig

@@ -143,6 +143,11 @@ config ATMEL_PIT
 	select CLKSRC_OF if OF
 	def_bool SOC_AT91SAM9 || SOC_SAMA5
 
+config ATMEL_ST
+	bool
+	select CLKSRC_OF
+	select MFD_SYSCON
+
 config CLKSRC_METAG_GENERIC
 	def_bool y if METAG
 	help

drivers/clocksource/Makefile

@@ -1,5 +1,6 @@
 obj-$(CONFIG_CLKSRC_OF)	+= clksrc-of.o
 obj-$(CONFIG_ATMEL_PIT)		+= timer-atmel-pit.o
+obj-$(CONFIG_ATMEL_ST)		+= timer-atmel-st.o
 obj-$(CONFIG_ATMEL_TCB_CLKSRC)	+= tcb_clksrc.o
 obj-$(CONFIG_X86_PM_TIMER)	+= acpi_pm.o
 obj-$(CONFIG_SCx200HR_TIMER)	+= scx200_hrt.o

arch/arm/mach-at91/at91rm9200_time.c → drivers/clocksource/timer-atmel-st.c

@@ -24,19 +24,17 @@
 #include <linux/irq.h>
 #include <linux/clockchips.h>
 #include <linux/export.h>
-#include <linux/of.h>
-#include <linux/of_address.h>
+#include <linux/mfd/syscon.h>
+#include <linux/mfd/syscon/atmel-st.h>
 #include <linux/of_irq.h>
-
-#include <asm/mach/time.h>
-
-#include <mach/at91_st.h>
-#include <mach/hardware.h>
+#include <linux/regmap.h>
 
 static unsigned long last_crtr;
 static u32 irqmask;
 static struct clock_event_device clkevt;
+static struct regmap *regmap_st;
 
+#define AT91_SLOW_CLOCK		32768
 #define RM9200_TIMER_LATCH	((AT91_SLOW_CLOCK + HZ/2) / HZ)
 
 /*
@@ -46,11 +44,11 @@ static struct clock_event_device clkevt;
  */
 static inline unsigned long read_CRTR(void)
 {
-	unsigned long x1, x2;
+	unsigned int x1, x2;
 
-	x1 = at91_st_read(AT91_ST_CRTR);
+	regmap_read(regmap_st, AT91_ST_CRTR, &x1);
 	do {
-		x2 = at91_st_read(AT91_ST_CRTR);
+		regmap_read(regmap_st, AT91_ST_CRTR, &x2);
 		if (x1 == x2)
 			break;
 		x1 = x2;
@@ -63,7 +61,10 @@ static inline unsigned long read_CRTR(void)
  */
 static irqreturn_t at91rm9200_timer_interrupt(int irq, void *dev_id)
 {
-	u32	sr = at91_st_read(AT91_ST_SR) & irqmask;
+	u32 sr;
+
+	regmap_read(regmap_st, AT91_ST_SR, &sr);
+	sr &= irqmask;
 
 	/*
 	 * irqs should be disabled here, but as the irq is shared they are only
@@ -92,13 +93,6 @@ static irqreturn_t at91rm9200_timer_interrupt(int irq, void *dev_id)
 	return IRQ_NONE;
 }
 
-static struct irqaction at91rm9200_timer_irq = {
-	.name		= "at91_tick",
-	.flags		= IRQF_SHARED | IRQF_TIMER | IRQF_IRQPOLL,
-	.handler	= at91rm9200_timer_interrupt,
-	.irq		= NR_IRQS_LEGACY + AT91_ID_SYS,
-};
-
 static cycle_t read_clk32k(struct clocksource *cs)
 {
 	return read_CRTR();
@@ -115,23 +109,25 @@ static struct clocksource clk32k = {
 static void
 clkevt32k_mode(enum clock_event_mode mode, struct clock_event_device *dev)
 {
+	unsigned int val;
+
 	/* Disable and flush pending timer interrupts */
-	at91_st_write(AT91_ST_IDR, AT91_ST_PITS | AT91_ST_ALMS);
-	at91_st_read(AT91_ST_SR);
+	regmap_write(regmap_st, AT91_ST_IDR, AT91_ST_PITS | AT91_ST_ALMS);
+	regmap_read(regmap_st, AT91_ST_SR, &val);
 
 	last_crtr = read_CRTR();
 	switch (mode) {
 	case CLOCK_EVT_MODE_PERIODIC:
 		/* PIT for periodic irqs; fixed rate of 1/HZ */
 		irqmask = AT91_ST_PITS;
-		at91_st_write(AT91_ST_PIMR, RM9200_TIMER_LATCH);
+		regmap_write(regmap_st, AT91_ST_PIMR, RM9200_TIMER_LATCH);
 		break;
 	case CLOCK_EVT_MODE_ONESHOT:
 		/* ALM for oneshot irqs, set by next_event()
 		 * before 32 seconds have passed
 		 */
 		irqmask = AT91_ST_ALMS;
-		at91_st_write(AT91_ST_RTAR, last_crtr);
+		regmap_write(regmap_st, AT91_ST_RTAR, last_crtr);
 		break;
 	case CLOCK_EVT_MODE_SHUTDOWN:
 	case CLOCK_EVT_MODE_UNUSED:
@@ -139,7 +135,7 @@ clkevt32k_mode(enum clock_event_mode mode, struct clock_event_device *dev)
 		irqmask = 0;
 		break;
 	}
-	at91_st_write(AT91_ST_IER, irqmask);
+	regmap_write(regmap_st, AT91_ST_IER, irqmask);
 }
 
 static int
@@ -147,6 +143,7 @@ clkevt32k_next_event(unsigned long delta, struct clock_event_device *dev)
 {
 	u32		alm;
 	int		status = 0;
+	unsigned int	val;
 
 	BUG_ON(delta < 2);
 
@@ -162,12 +159,12 @@ clkevt32k_next_event(unsigned long delta, struct clock_event_device *dev)
 	alm = read_CRTR();
 
 	/* Cancel any pending alarm; flush any pending IRQ */
-	at91_st_write(AT91_ST_RTAR, alm);
-	at91_st_read(AT91_ST_SR);
+	regmap_write(regmap_st, AT91_ST_RTAR, alm);
+	regmap_read(regmap_st, AT91_ST_SR, &val);
 
 	/* Schedule alarm by writing RTAR. */
 	alm += delta;
-	at91_st_write(AT91_ST_RTAR, alm);
+	regmap_write(regmap_st, AT91_ST_RTAR, alm);
 
 	return status;
 }
@@ -180,66 +177,40 @@ static struct clock_event_device clkevt = {
 	.set_mode	= clkevt32k_mode,
 };
 
-void __iomem *at91_st_base;
-EXPORT_SYMBOL_GPL(at91_st_base);
-
-static const struct of_device_id at91rm9200_st_timer_ids[] = {
-	{ .compatible = "atmel,at91rm9200-st" },
-	{ /* sentinel */ }
-};
-
-static int __init of_at91rm9200_st_init(void)
-{
-	struct device_node *np;
-	int ret;
-
-	np = of_find_matching_node(NULL, at91rm9200_st_timer_ids);
-	if (!np)
-		goto err;
-
-	at91_st_base = of_iomap(np, 0);
-	if (!at91_st_base)
-		goto node_err;
-
-	/* Get the interrupts property */
-	ret = irq_of_parse_and_map(np, 0);
-	if (!ret)
-		goto ioremap_err;
-	at91rm9200_timer_irq.irq = ret;
-
-	of_node_put(np);
-
-	return 0;
-
-ioremap_err:
-	iounmap(at91_st_base);
-node_err:
-	of_node_put(np);
-err:
-	return -EINVAL;
-}
-
 /*
  * ST (system timer) module supports both clockevents and clocksource.
  */
-void __init at91rm9200_timer_init(void)
+static void __init atmel_st_timer_init(struct device_node *node)
 {
-	/* For device tree enabled device: initialize here */
-	of_at91rm9200_st_init();
+	unsigned int val;
+	int irq, ret;
+
+	regmap_st = syscon_node_to_regmap(node);
+	if (IS_ERR(regmap_st))
+		panic(pr_fmt("Unable to get regmap\n"));
 
 	/* Disable all timer interrupts, and clear any pending ones */
-	at91_st_write(AT91_ST_IDR,
+	regmap_write(regmap_st, AT91_ST_IDR,
 		AT91_ST_PITS | AT91_ST_WDOVF | AT91_ST_RTTINC | AT91_ST_ALMS);
-	at91_st_read(AT91_ST_SR);
+	regmap_read(regmap_st, AT91_ST_SR, &val);
+
+	/* Get the interrupts property */
+	irq  = irq_of_parse_and_map(node, 0);
+	if (!irq)
+		panic(pr_fmt("Unable to get IRQ from DT\n"));
 
 	/* Make IRQs happen for the system timer */
-	setup_irq(at91rm9200_timer_irq.irq, &at91rm9200_timer_irq);
+	ret = request_irq(irq, at91rm9200_timer_interrupt,
+			  IRQF_SHARED | IRQF_TIMER | IRQF_IRQPOLL,
+			  "at91_tick", regmap_st);
+	if (ret)
+		panic(pr_fmt("Unable to setup IRQ\n"));
 
 	/* The 32KiHz "Slow Clock" (tick every 30517.58 nanoseconds) is used
 	 * directly for the clocksource and all clockevents, after adjusting
 	 * its prescaler from the 1 Hz default.
 	 */
-	at91_st_write(AT91_ST_RTMR, 1);
+	regmap_write(regmap_st, AT91_ST_RTMR, 1);
 
 	/* Setup timer clockevent, with minimum of two ticks (important!!) */
 	clkevt.cpumask = cpumask_of(0);
@@ -249,3 +220,5 @@ void __init at91rm9200_timer_init(void)
 	/* register clocksource */
 	clocksource_register_hz(&clk32k, AT91_SLOW_CLOCK);
 }
+CLOCKSOURCE_OF_DECLARE(atmel_st_timer, "atmel,at91rm9200-st",
+		       atmel_st_timer_init);

drivers/firmware/Kconfig

@@ -132,6 +132,10 @@ config ISCSI_IBFT
 	  detect iSCSI boot parameters dynamically during system boot, say Y.
 	  Otherwise, say N.
 
+config QCOM_SCM
+	bool
+	depends on ARM || ARM64
+
 source "drivers/firmware/google/Kconfig"
 source "drivers/firmware/efi/Kconfig"
 

drivers/firmware/Makefile

@@ -11,6 +11,8 @@ obj-$(CONFIG_DMIID)		+= dmi-id.o
 obj-$(CONFIG_ISCSI_IBFT_FIND)	+= iscsi_ibft_find.o
 obj-$(CONFIG_ISCSI_IBFT)	+= iscsi_ibft.o
 obj-$(CONFIG_FIRMWARE_MEMMAP)	+= memmap.o
+obj-$(CONFIG_QCOM_SCM)		+= qcom_scm.o
+CFLAGS_qcom_scm.o :=$(call as-instr,.arch_extension sec,-DREQUIRES_SEC=1)
 
 obj-$(CONFIG_GOOGLE_FIRMWARE)	+= google/
 obj-$(CONFIG_EFI)		+= efi/

drivers/firmware/qcom_scm.c

@@ -0,0 +1,494 @@
+/* Copyright (c) 2010, Code Aurora Forum. All rights reserved.
+ * Copyright (C) 2015 Linaro Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+ * 02110-1301, USA.
+ */
+
+#include <linux/slab.h>
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/mutex.h>
+#include <linux/errno.h>
+#include <linux/err.h>
+#include <linux/qcom_scm.h>
+
+#include <asm/outercache.h>
+#include <asm/cacheflush.h>
+
+
+#define QCOM_SCM_ENOMEM		-5
+#define QCOM_SCM_EOPNOTSUPP	-4
+#define QCOM_SCM_EINVAL_ADDR	-3
+#define QCOM_SCM_EINVAL_ARG	-2
+#define QCOM_SCM_ERROR		-1
+#define QCOM_SCM_INTERRUPTED	1
+
+#define QCOM_SCM_FLAG_COLDBOOT_CPU0	0x00
+#define QCOM_SCM_FLAG_COLDBOOT_CPU1	0x01
+#define QCOM_SCM_FLAG_COLDBOOT_CPU2	0x08
+#define QCOM_SCM_FLAG_COLDBOOT_CPU3	0x20
+
+#define QCOM_SCM_FLAG_WARMBOOT_CPU0	0x04
+#define QCOM_SCM_FLAG_WARMBOOT_CPU1	0x02
+#define QCOM_SCM_FLAG_WARMBOOT_CPU2	0x10
+#define QCOM_SCM_FLAG_WARMBOOT_CPU3	0x40
+
+struct qcom_scm_entry {
+	int flag;
+	void *entry;
+};
+
+static struct qcom_scm_entry qcom_scm_wb[] = {
+	{ .flag = QCOM_SCM_FLAG_WARMBOOT_CPU0 },
+	{ .flag = QCOM_SCM_FLAG_WARMBOOT_CPU1 },
+	{ .flag = QCOM_SCM_FLAG_WARMBOOT_CPU2 },
+	{ .flag = QCOM_SCM_FLAG_WARMBOOT_CPU3 },
+};
+
+static DEFINE_MUTEX(qcom_scm_lock);
+
+/**
+ * struct qcom_scm_command - one SCM command buffer
+ * @len: total available memory for command and response
+ * @buf_offset: start of command buffer
+ * @resp_hdr_offset: start of response buffer
+ * @id: command to be executed
+ * @buf: buffer returned from qcom_scm_get_command_buffer()
+ *
+ * An SCM command is laid out in memory as follows:
+ *
+ *	------------------- <--- struct qcom_scm_command
+ *	| command header  |
+ *	------------------- <--- qcom_scm_get_command_buffer()
+ *	| command buffer  |
+ *	------------------- <--- struct qcom_scm_response and
+ *	| response header |      qcom_scm_command_to_response()
+ *	------------------- <--- qcom_scm_get_response_buffer()
+ *	| response buffer |
+ *	-------------------
+ *
+ * There can be arbitrary padding between the headers and buffers so
+ * you should always use the appropriate qcom_scm_get_*_buffer() routines
+ * to access the buffers in a safe manner.
+ */
+struct qcom_scm_command {
+	__le32 len;
+	__le32 buf_offset;
+	__le32 resp_hdr_offset;
+	__le32 id;
+	__le32 buf[0];
+};
+
+/**
+ * struct qcom_scm_response - one SCM response buffer
+ * @len: total available memory for response
+ * @buf_offset: start of response data relative to start of qcom_scm_response
+ * @is_complete: indicates if the command has finished processing
+ */
+struct qcom_scm_response {
+	__le32 len;
+	__le32 buf_offset;
+	__le32 is_complete;
+};
+
+/**
+ * alloc_qcom_scm_command() - Allocate an SCM command
+ * @cmd_size: size of the command buffer
+ * @resp_size: size of the response buffer
+ *
+ * Allocate an SCM command, including enough room for the command
+ * and response headers as well as the command and response buffers.
+ *
+ * Returns a valid &qcom_scm_command on success or %NULL if the allocation fails.
+ */
+static struct qcom_scm_command *alloc_qcom_scm_command(size_t cmd_size, size_t resp_size)
+{
+	struct qcom_scm_command *cmd;
+	size_t len = sizeof(*cmd) + sizeof(struct qcom_scm_response) + cmd_size +
+		resp_size;
+	u32 offset;
+
+	cmd = kzalloc(PAGE_ALIGN(len), GFP_KERNEL);
+	if (cmd) {
+		cmd->len = cpu_to_le32(len);
+		offset = offsetof(struct qcom_scm_command, buf);
+		cmd->buf_offset = cpu_to_le32(offset);
+		cmd->resp_hdr_offset = cpu_to_le32(offset + cmd_size);
+	}
+	return cmd;
+}
+
+/**
+ * free_qcom_scm_command() - Free an SCM command
+ * @cmd: command to free
+ *
+ * Free an SCM command.
+ */
+static inline void free_qcom_scm_command(struct qcom_scm_command *cmd)
+{
+	kfree(cmd);
+}
+
+/**
+ * qcom_scm_command_to_response() - Get a pointer to a qcom_scm_response
+ * @cmd: command
+ *
+ * Returns a pointer to a response for a command.
+ */
+static inline struct qcom_scm_response *qcom_scm_command_to_response(
+		const struct qcom_scm_command *cmd)
+{
+	return (void *)cmd + le32_to_cpu(cmd->resp_hdr_offset);
+}
+
+/**
+ * qcom_scm_get_command_buffer() - Get a pointer to a command buffer
+ * @cmd: command
+ *
+ * Returns a pointer to the command buffer of a command.
+ */
+static inline void *qcom_scm_get_command_buffer(const struct qcom_scm_command *cmd)
+{
+	return (void *)cmd->buf;
+}
+
+/**
+ * qcom_scm_get_response_buffer() - Get a pointer to a response buffer
+ * @rsp: response
+ *
+ * Returns a pointer to a response buffer of a response.
+ */
+static inline void *qcom_scm_get_response_buffer(const struct qcom_scm_response *rsp)
+{
+	return (void *)rsp + le32_to_cpu(rsp->buf_offset);
+}
+
+static int qcom_scm_remap_error(int err)
+{
+	pr_err("qcom_scm_call failed with error code %d\n", err);
+	switch (err) {
+	case QCOM_SCM_ERROR:
+		return -EIO;
+	case QCOM_SCM_EINVAL_ADDR:
+	case QCOM_SCM_EINVAL_ARG:
+		return -EINVAL;
+	case QCOM_SCM_EOPNOTSUPP:
+		return -EOPNOTSUPP;
+	case QCOM_SCM_ENOMEM:
+		return -ENOMEM;
+	}
+	return -EINVAL;
+}
+
+static u32 smc(u32 cmd_addr)
+{
+	int context_id;
+	register u32 r0 asm("r0") = 1;
+	register u32 r1 asm("r1") = (u32)&context_id;
+	register u32 r2 asm("r2") = cmd_addr;
+	do {
+		asm volatile(
+			__asmeq("%0", "r0")
+			__asmeq("%1", "r0")
+			__asmeq("%2", "r1")
+			__asmeq("%3", "r2")
+#ifdef REQUIRES_SEC
+			".arch_extension sec\n"
+#endif
+			"smc	#0	@ switch to secure world\n"
+			: "=r" (r0)
+			: "r" (r0), "r" (r1), "r" (r2)
+			: "r3");
+	} while (r0 == QCOM_SCM_INTERRUPTED);
+
+	return r0;
+}
+
+static int __qcom_scm_call(const struct qcom_scm_command *cmd)
+{
+	int ret;
+	u32 cmd_addr = virt_to_phys(cmd);
+
+	/*
+	 * Flush the command buffer so that the secure world sees
+	 * the correct data.
+	 */
+	__cpuc_flush_dcache_area((void *)cmd, cmd->len);
+	outer_flush_range(cmd_addr, cmd_addr + cmd->len);
+
+	ret = smc(cmd_addr);
+	if (ret < 0)
+		ret = qcom_scm_remap_error(ret);
+
+	return ret;
+}
+
+static void qcom_scm_inv_range(unsigned long start, unsigned long end)
+{
+	u32 cacheline_size, ctr;
+
+	asm volatile("mrc p15, 0, %0, c0, c0, 1" : "=r" (ctr));
+	cacheline_size = 4 << ((ctr >> 16) & 0xf);
+
+	start = round_down(start, cacheline_size);
+	end = round_up(end, cacheline_size);
+	outer_inv_range(start, end);
+	while (start < end) {
+		asm ("mcr p15, 0, %0, c7, c6, 1" : : "r" (start)
+		     : "memory");
+		start += cacheline_size;
+	}
+	dsb();
+	isb();
+}
+
+/**
+ * qcom_scm_call() - Send an SCM command
+ * @svc_id: service identifier
+ * @cmd_id: command identifier
+ * @cmd_buf: command buffer
+ * @cmd_len: length of the command buffer
+ * @resp_buf: response buffer
+ * @resp_len: length of the response buffer
+ *
+ * Sends a command to the SCM and waits for the command to finish processing.
+ *
+ * A note on cache maintenance:
+ * Note that any buffers that are expected to be accessed by the secure world
+ * must be flushed before invoking qcom_scm_call and invalidated in the cache
+ * immediately after qcom_scm_call returns. Cache maintenance on the command
+ * and response buffers is taken care of by qcom_scm_call; however, callers are
+ * responsible for any other cached buffers passed over to the secure world.
+ */
+static int qcom_scm_call(u32 svc_id, u32 cmd_id, const void *cmd_buf,
+			size_t cmd_len, void *resp_buf, size_t resp_len)
+{
+	int ret;
+	struct qcom_scm_command *cmd;
+	struct qcom_scm_response *rsp;
+	unsigned long start, end;
+
+	cmd = alloc_qcom_scm_command(cmd_len, resp_len);
+	if (!cmd)
+		return -ENOMEM;
+
+	cmd->id = cpu_to_le32((svc_id << 10) | cmd_id);
+	if (cmd_buf)
+		memcpy(qcom_scm_get_command_buffer(cmd), cmd_buf, cmd_len);
+
+	mutex_lock(&qcom_scm_lock);
+	ret = __qcom_scm_call(cmd);
+	mutex_unlock(&qcom_scm_lock);
+	if (ret)
+		goto out;
+
+	rsp = qcom_scm_command_to_response(cmd);
+	start = (unsigned long)rsp;
+
+	do {
+		qcom_scm_inv_range(start, start + sizeof(*rsp));
+	} while (!rsp->is_complete);
+
+	end = (unsigned long)qcom_scm_get_response_buffer(rsp) + resp_len;
+	qcom_scm_inv_range(start, end);
+
+	if (resp_buf)
+		memcpy(resp_buf, qcom_scm_get_response_buffer(rsp), resp_len);
+out:
+	free_qcom_scm_command(cmd);
+	return ret;
+}
+
+#define SCM_CLASS_REGISTER	(0x2 << 8)
+#define SCM_MASK_IRQS		BIT(5)
+#define SCM_ATOMIC(svc, cmd, n) (((((svc) << 10)|((cmd) & 0x3ff)) << 12) | \
+				SCM_CLASS_REGISTER | \
+				SCM_MASK_IRQS | \
+				(n & 0xf))
+
+/**
+ * qcom_scm_call_atomic1() - Send an atomic SCM command with one argument
+ * @svc_id: service identifier
+ * @cmd_id: command identifier
+ * @arg1: first argument
+ *
+ * This shall only be used with commands that are guaranteed to be
+ * uninterruptable, atomic and SMP safe.
+ */
+static s32 qcom_scm_call_atomic1(u32 svc, u32 cmd, u32 arg1)
+{
+	int context_id;
+
+	register u32 r0 asm("r0") = SCM_ATOMIC(svc, cmd, 1);
+	register u32 r1 asm("r1") = (u32)&context_id;
+	register u32 r2 asm("r2") = arg1;
+
+	asm volatile(
+			__asmeq("%0", "r0")
+			__asmeq("%1", "r0")
+			__asmeq("%2", "r1")
+			__asmeq("%3", "r2")
+#ifdef REQUIRES_SEC
+			".arch_extension sec\n"
+#endif
+			"smc    #0      @ switch to secure world\n"
+			: "=r" (r0)
+			: "r" (r0), "r" (r1), "r" (r2)
+			: "r3");
+	return r0;
+}
+
+u32 qcom_scm_get_version(void)
+{
+	int context_id;
+	static u32 version = -1;
+	register u32 r0 asm("r0");
+	register u32 r1 asm("r1");
+
+	if (version != -1)
+		return version;
+
+	mutex_lock(&qcom_scm_lock);
+
+	r0 = 0x1 << 8;
+	r1 = (u32)&context_id;
+	do {
+		asm volatile(
+			__asmeq("%0", "r0")
+			__asmeq("%1", "r1")
+			__asmeq("%2", "r0")
+			__asmeq("%3", "r1")
+#ifdef REQUIRES_SEC
+			".arch_extension sec\n"
+#endif
+			"smc	#0	@ switch to secure world\n"
+			: "=r" (r0), "=r" (r1)
+			: "r" (r0), "r" (r1)
+			: "r2", "r3");
+	} while (r0 == QCOM_SCM_INTERRUPTED);
+
+	version = r1;
+	mutex_unlock(&qcom_scm_lock);
+
+	return version;
+}
+EXPORT_SYMBOL(qcom_scm_get_version);
+
+#define QCOM_SCM_SVC_BOOT			0x1
+#define QCOM_SCM_BOOT_ADDR			0x1
+/*
+ * Set the cold/warm boot address for one of the CPU cores.
+ */
+static int qcom_scm_set_boot_addr(u32 addr, int flags)
+{
+	struct {
+		__le32 flags;
+		__le32 addr;
+	} cmd;
+
+	cmd.addr = cpu_to_le32(addr);
+	cmd.flags = cpu_to_le32(flags);
+	return qcom_scm_call(QCOM_SCM_SVC_BOOT, QCOM_SCM_BOOT_ADDR,
+			&cmd, sizeof(cmd), NULL, 0);
+}
+
+/**
+ * qcom_scm_set_cold_boot_addr() - Set the cold boot address for cpus
+ * @entry: Entry point function for the cpus
+ * @cpus: The cpumask of cpus that will use the entry point
+ *
+ * Set the cold boot address of the cpus. Any cpu outside the supported
+ * range would be removed from the cpu present mask.
+ */
+int qcom_scm_set_cold_boot_addr(void *entry, const cpumask_t *cpus)
+{
+	int flags = 0;
+	int cpu;
+	int scm_cb_flags[] = {
+		QCOM_SCM_FLAG_COLDBOOT_CPU0,
+		QCOM_SCM_FLAG_COLDBOOT_CPU1,
+		QCOM_SCM_FLAG_COLDBOOT_CPU2,
+		QCOM_SCM_FLAG_COLDBOOT_CPU3,
+	};
+
+	if (!cpus || (cpus && cpumask_empty(cpus)))
+		return -EINVAL;
+
+	for_each_cpu(cpu, cpus) {
+		if (cpu < ARRAY_SIZE(scm_cb_flags))
+			flags |= scm_cb_flags[cpu];
+		else
+			set_cpu_present(cpu, false);
+	}
+
+	return qcom_scm_set_boot_addr(virt_to_phys(entry), flags);
+}
+EXPORT_SYMBOL(qcom_scm_set_cold_boot_addr);
+
+/**
+ * qcom_scm_set_warm_boot_addr() - Set the warm boot address for cpus
+ * @entry: Entry point function for the cpus
+ * @cpus: The cpumask of cpus that will use the entry point
+ *
+ * Set the Linux entry point for the SCM to transfer control to when coming
+ * out of a power down. CPU power down may be executed on cpuidle or hotplug.
+ */
+int qcom_scm_set_warm_boot_addr(void *entry, const cpumask_t *cpus)
+{
+	int ret;
+	int flags = 0;
+	int cpu;
+
+	/*
+	 * Reassign only if we are switching from hotplug entry point
+	 * to cpuidle entry point or vice versa.
+	 */
+	for_each_cpu(cpu, cpus) {
+		if (entry == qcom_scm_wb[cpu].entry)
+			continue;
+		flags |= qcom_scm_wb[cpu].flag;
+	}
+
+	/* No change in entry function */
+	if (!flags)
+		return 0;
+
+	ret = qcom_scm_set_boot_addr(virt_to_phys(entry), flags);
+	if (!ret) {
+		for_each_cpu(cpu, cpus)
+			qcom_scm_wb[cpu].entry = entry;
+	}
+
+	return ret;
+}
+EXPORT_SYMBOL(qcom_scm_set_warm_boot_addr);
+
+#define QCOM_SCM_CMD_TERMINATE_PC	0x2
+#define QCOM_SCM_FLUSH_FLAG_MASK	0x3
+
+/**
+ * qcom_scm_cpu_power_down() - Power down the cpu
+ * @flags - Flags to flush cache
+ *
+ * This is an end point to power down cpu. If there was a pending interrupt,
+ * the control would return from this function, otherwise, the cpu jumps to the
+ * warm boot entry point set for this cpu upon reset.
+ */
+void qcom_scm_cpu_power_down(u32 flags)
+{
+	qcom_scm_call_atomic1(QCOM_SCM_SVC_BOOT, QCOM_SCM_CMD_TERMINATE_PC,
+			flags & QCOM_SCM_FLUSH_FLAG_MASK);
+}
+EXPORT_SYMBOL(qcom_scm_cpu_power_down);

drivers/memory/omap-gpmc.c

@@ -12,8 +12,6 @@
  * it under the terms of the GNU General Public License version 2 as
  * published by the Free Software Foundation.
  */
-#undef DEBUG
-
 #include <linux/irq.h>
 #include <linux/kernel.h>
 #include <linux/init.h>
@@ -29,6 +27,7 @@
 #include <linux/of_address.h>
 #include <linux/of_mtd.h>
 #include <linux/of_device.h>
+#include <linux/of_platform.h>
 #include <linux/omap-gpmc.h>
 #include <linux/mtd/nand.h>
 #include <linux/pm_runtime.h>
@@ -136,13 +135,21 @@
 #define GPMC_CONFIG1_WRITETYPE_ASYNC    (0 << 27)
 #define GPMC_CONFIG1_WRITETYPE_SYNC     (1 << 27)
 #define GPMC_CONFIG1_CLKACTIVATIONTIME(val) ((val & 3) << 25)
+/** CLKACTIVATIONTIME Max Ticks */
+#define GPMC_CONFIG1_CLKACTIVATIONTIME_MAX 2
 #define GPMC_CONFIG1_PAGE_LEN(val)      ((val & 3) << 23)
+/** ATTACHEDDEVICEPAGELENGTH Max Value */
+#define GPMC_CONFIG1_ATTACHEDDEVICEPAGELENGTH_MAX 2
 #define GPMC_CONFIG1_WAIT_READ_MON      (1 << 22)
 #define GPMC_CONFIG1_WAIT_WRITE_MON     (1 << 21)
-#define GPMC_CONFIG1_WAIT_MON_IIME(val) ((val & 3) << 18)
+#define GPMC_CONFIG1_WAIT_MON_TIME(val) ((val & 3) << 18)
+/** WAITMONITORINGTIME Max Ticks */
+#define GPMC_CONFIG1_WAITMONITORINGTIME_MAX  2
 #define GPMC_CONFIG1_WAIT_PIN_SEL(val)  ((val & 3) << 16)
 #define GPMC_CONFIG1_DEVICESIZE(val)    ((val & 3) << 12)
 #define GPMC_CONFIG1_DEVICESIZE_16      GPMC_CONFIG1_DEVICESIZE(1)
+/** DEVICESIZE Max Value */
+#define GPMC_CONFIG1_DEVICESIZE_MAX     1
 #define GPMC_CONFIG1_DEVICETYPE(val)    ((val & 3) << 10)
 #define GPMC_CONFIG1_DEVICETYPE_NOR     GPMC_CONFIG1_DEVICETYPE(0)
 #define GPMC_CONFIG1_MUXTYPE(val)       ((val & 3) << 8)
@@ -153,6 +160,15 @@
 #define GPMC_CONFIG1_FCLK_DIV4          (GPMC_CONFIG1_FCLK_DIV(3))
 #define GPMC_CONFIG7_CSVALID		(1 << 6)
 
+#define GPMC_CONFIG7_BASEADDRESS_MASK	0x3f
+#define GPMC_CONFIG7_CSVALID_MASK	BIT(6)
+#define GPMC_CONFIG7_MASKADDRESS_OFFSET	8
+#define GPMC_CONFIG7_MASKADDRESS_MASK	(0xf << GPMC_CONFIG7_MASKADDRESS_OFFSET)
+/* All CONFIG7 bits except reserved bits */
+#define GPMC_CONFIG7_MASK		(GPMC_CONFIG7_BASEADDRESS_MASK | \
+					 GPMC_CONFIG7_CSVALID_MASK |     \
+					 GPMC_CONFIG7_MASKADDRESS_MASK)
+
 #define GPMC_DEVICETYPE_NOR		0
 #define GPMC_DEVICETYPE_NAND		2
 #define GPMC_CONFIG_WRITEPROTECT	0x00000010
@@ -169,6 +185,11 @@
  */
 #define	GPMC_NR_IRQ		2
 
+enum gpmc_clk_domain {
+	GPMC_CD_FCLK,
+	GPMC_CD_CLK
+};
+
 struct gpmc_cs_data {
 	const char *name;
 
@@ -267,16 +288,55 @@ static unsigned long gpmc_get_fclk_period(void)
 	return rate;
 }
 
-static unsigned int gpmc_ns_to_ticks(unsigned int time_ns)
+/**
+ * gpmc_get_clk_period - get period of selected clock domain in ps
+ * @cs Chip Select Region.
+ * @cd Clock Domain.
+ *
+ * GPMC_CS_CONFIG1 GPMCFCLKDIVIDER for cs has to be setup
+ * prior to calling this function with GPMC_CD_CLK.
+ */
+static unsigned long gpmc_get_clk_period(int cs, enum gpmc_clk_domain cd)
+{
+
+	unsigned long tick_ps = gpmc_get_fclk_period();
+	u32 l;
+	int div;
+
+	switch (cd) {
+	case GPMC_CD_CLK:
+		/* get current clk divider */
+		l = gpmc_cs_read_reg(cs, GPMC_CS_CONFIG1);
+		div = (l & 0x03) + 1;
+		/* get GPMC_CLK period */
+		tick_ps *= div;
+		break;
+	case GPMC_CD_FCLK:
+		/* FALL-THROUGH */
+	default:
+		break;
+	}
+
+	return tick_ps;
+
+}
+
+static unsigned int gpmc_ns_to_clk_ticks(unsigned int time_ns, int cs,
+					 enum gpmc_clk_domain cd)
 {
 	unsigned long tick_ps;
 
 	/* Calculate in picosecs to yield more exact results */
-	tick_ps = gpmc_get_fclk_period();
+	tick_ps = gpmc_get_clk_period(cs, cd);
 
 	return (time_ns * 1000 + tick_ps - 1) / tick_ps;
 }
 
+static unsigned int gpmc_ns_to_ticks(unsigned int time_ns)
+{
+	return gpmc_ns_to_clk_ticks(time_ns, /* any CS */ 0, GPMC_CD_FCLK);
+}
+
 static unsigned int gpmc_ps_to_ticks(unsigned int time_ps)
 {
 	unsigned long tick_ps;
@@ -287,9 +347,15 @@ static unsigned int gpmc_ps_to_ticks(unsigned int time_ps)
 	return (time_ps + tick_ps - 1) / tick_ps;
 }
 
+unsigned int gpmc_clk_ticks_to_ns(unsigned ticks, int cs,
+				  enum gpmc_clk_domain cd)
+{
+	return ticks * gpmc_get_clk_period(cs, cd) / 1000;
+}
+
 unsigned int gpmc_ticks_to_ns(unsigned int ticks)
 {
-	return ticks * gpmc_get_fclk_period() / 1000;
+	return gpmc_clk_ticks_to_ns(ticks, /* any CS */ 0, GPMC_CD_FCLK);
 }
 
 static unsigned int gpmc_ticks_to_ps(unsigned int ticks)
@@ -338,33 +404,66 @@ static void gpmc_cs_bool_timings(int cs, const struct gpmc_bool_timings *p)
 }
 
 #ifdef DEBUG
-static int get_gpmc_timing_reg(int cs, int reg, int st_bit, int end_bit,
-			       bool raw, bool noval, int shift,
-			       const char *name)
+/**
+ * get_gpmc_timing_reg - read a timing parameter and print DTS settings for it.
+ * @cs:      Chip Select Region
+ * @reg:     GPMC_CS_CONFIGn register offset.
+ * @st_bit:  Start Bit
+ * @end_bit: End Bit. Must be >= @st_bit.
+ * @ma:x     Maximum parameter value (before optional @shift).
+ *           If 0, maximum is as high as @st_bit and @end_bit allow.
+ * @name:    DTS node name, w/o "gpmc,"
+ * @cd:      Clock Domain of timing parameter.
+ * @shift:   Parameter value left shifts @shift, which is then printed instead of value.
+ * @raw:     Raw Format Option.
+ *           raw format:  gpmc,name = <value>
+ *           tick format: gpmc,name = <value> /&zwj;* x ns -- y ns; x ticks *&zwj;/
+ *           Where x ns -- y ns result in the same tick value.
+ *           When @max is exceeded, "invalid" is printed inside comment.
+ * @noval:   Parameter values equal to 0 are not printed.
+ * @return:  Specified timing parameter (after optional @shift).
+ *
+ */
+static int get_gpmc_timing_reg(
+	/* timing specifiers */
+	int cs, int reg, int st_bit, int end_bit, int max,
+	const char *name, const enum gpmc_clk_domain cd,
+	/* value transform */
+	int shift,
+	/* format specifiers */
+	bool raw, bool noval)
 {
 	u32 l;
-	int nr_bits, max_value, mask;
+	int nr_bits;
+	int mask;
+	bool invalid;
 
 	l = gpmc_cs_read_reg(cs, reg);
 	nr_bits = end_bit - st_bit + 1;
-	max_value = (1 << nr_bits) - 1;
-	mask = max_value << st_bit;
-	l = (l & mask) >> st_bit;
+	mask = (1 << nr_bits) - 1;
+	l = (l >> st_bit) & mask;
+	if (!max)
+		max = mask;
+	invalid = l > max;
 	if (shift)
 		l = (shift << l);
 	if (noval && (l == 0))
 		return 0;
 	if (!raw) {
-		unsigned int time_ns_min, time_ns, time_ns_max;
-
-		time_ns_min = gpmc_ticks_to_ns(l ? l - 1 : 0);
-		time_ns = gpmc_ticks_to_ns(l);
-		time_ns_max = gpmc_ticks_to_ns(l + 1 > max_value ?
-					       max_value : l + 1);
-		pr_info("gpmc,%s = <%u> (%u - %u ns, %i ticks)\n",
-			name, time_ns, time_ns_min, time_ns_max, l);
+		/* DTS tick format for timings in ns */
+		unsigned int time_ns;
+		unsigned int time_ns_min = 0;
+
+		if (l)
+			time_ns_min = gpmc_clk_ticks_to_ns(l - 1, cs, cd) + 1;
+		time_ns = gpmc_clk_ticks_to_ns(l, cs, cd);
+		pr_info("gpmc,%s = <%u> /* %u ns - %u ns; %i ticks%s*/\n",
+			name, time_ns, time_ns_min, time_ns, l,
+			invalid ? "; invalid " : " ");
 	} else {
-		pr_info("gpmc,%s = <%u>\n", name, l);
+		/* raw format */
+		pr_info("gpmc,%s = <%u>%s\n", name, l,
+			invalid ? " /* invalid */" : "");
 	}
 
 	return l;
@@ -374,13 +473,19 @@ static int get_gpmc_timing_reg(int cs, int reg, int st_bit, int end_bit,
 	pr_info("cs%i %s: 0x%08x\n", cs, #config, \
 		gpmc_cs_read_reg(cs, config))
 #define GPMC_GET_RAW(reg, st, end, field) \
-	get_gpmc_timing_reg(cs, (reg), (st), (end), 1, 0, 0, field)
+	get_gpmc_timing_reg(cs, (reg), (st), (end), 0, field, GPMC_CD_FCLK, 0, 1, 0)
+#define GPMC_GET_RAW_MAX(reg, st, end, max, field) \
+	get_gpmc_timing_reg(cs, (reg), (st), (end), (max), field, GPMC_CD_FCLK, 0, 1, 0)
 #define GPMC_GET_RAW_BOOL(reg, st, end, field) \
-	get_gpmc_timing_reg(cs, (reg), (st), (end), 1, 1, 0, field)
-#define GPMC_GET_RAW_SHIFT(reg, st, end, shift, field) \
-	get_gpmc_timing_reg(cs, (reg), (st), (end), 1, 1, (shift), field)
+	get_gpmc_timing_reg(cs, (reg), (st), (end), 0, field, GPMC_CD_FCLK, 0, 1, 1)
+#define GPMC_GET_RAW_SHIFT_MAX(reg, st, end, shift, max, field) \
+	get_gpmc_timing_reg(cs, (reg), (st), (end), (max), field, GPMC_CD_FCLK, (shift), 1, 1)
 #define GPMC_GET_TICKS(reg, st, end, field) \
-	get_gpmc_timing_reg(cs, (reg), (st), (end), 0, 0, 0, field)
+	get_gpmc_timing_reg(cs, (reg), (st), (end), 0, field, GPMC_CD_FCLK, 0, 0, 0)
+#define GPMC_GET_TICKS_CD(reg, st, end, field, cd) \
+	get_gpmc_timing_reg(cs, (reg), (st), (end), 0, field, (cd), 0, 0, 0)
+#define GPMC_GET_TICKS_CD_MAX(reg, st, end, max, field, cd) \
+	get_gpmc_timing_reg(cs, (reg), (st), (end), (max), field, (cd), 0, 0, 0)
 
 static void gpmc_show_regs(int cs, const char *desc)
 {
@@ -404,11 +509,14 @@ static void gpmc_cs_show_timings(int cs, const char *desc)
 	pr_info("gpmc cs%i access configuration:\n", cs);
 	GPMC_GET_RAW_BOOL(GPMC_CS_CONFIG1,  4,  4, "time-para-granularity");
 	GPMC_GET_RAW(GPMC_CS_CONFIG1,  8,  9, "mux-add-data");
-	GPMC_GET_RAW(GPMC_CS_CONFIG1, 12, 13, "device-width");
+	GPMC_GET_RAW_MAX(GPMC_CS_CONFIG1, 12, 13,
+			 GPMC_CONFIG1_DEVICESIZE_MAX, "device-width");
 	GPMC_GET_RAW(GPMC_CS_CONFIG1, 16, 17, "wait-pin");
 	GPMC_GET_RAW_BOOL(GPMC_CS_CONFIG1, 21, 21, "wait-on-write");
 	GPMC_GET_RAW_BOOL(GPMC_CS_CONFIG1, 22, 22, "wait-on-read");
-	GPMC_GET_RAW_SHIFT(GPMC_CS_CONFIG1, 23, 24, 4, "burst-length");
+	GPMC_GET_RAW_SHIFT_MAX(GPMC_CS_CONFIG1, 23, 24, 4,
+			       GPMC_CONFIG1_ATTACHEDDEVICEPAGELENGTH_MAX,
+			       "burst-length");
 	GPMC_GET_RAW_BOOL(GPMC_CS_CONFIG1, 27, 27, "sync-write");
 	GPMC_GET_RAW_BOOL(GPMC_CS_CONFIG1, 28, 28, "burst-write");
 	GPMC_GET_RAW_BOOL(GPMC_CS_CONFIG1, 29, 29, "gpmc,sync-read");
@@ -448,8 +556,12 @@ static void gpmc_cs_show_timings(int cs, const char *desc)
 	GPMC_GET_TICKS(GPMC_CS_CONFIG6, 0, 3, "bus-turnaround-ns");
 	GPMC_GET_TICKS(GPMC_CS_CONFIG6, 8, 11, "cycle2cycle-delay-ns");
 
-	GPMC_GET_TICKS(GPMC_CS_CONFIG1, 18, 19, "wait-monitoring-ns");
-	GPMC_GET_TICKS(GPMC_CS_CONFIG1, 25, 26, "clk-activation-ns");
+	GPMC_GET_TICKS_CD_MAX(GPMC_CS_CONFIG1, 18, 19,
+			      GPMC_CONFIG1_WAITMONITORINGTIME_MAX,
+			      "wait-monitoring-ns", GPMC_CD_CLK);
+	GPMC_GET_TICKS_CD_MAX(GPMC_CS_CONFIG1, 25, 26,
+			      GPMC_CONFIG1_CLKACTIVATIONTIME_MAX,
+			      "clk-activation-ns", GPMC_CD_FCLK);
 
 	GPMC_GET_TICKS(GPMC_CS_CONFIG6, 16, 19, "wr-data-mux-bus-ns");
 	GPMC_GET_TICKS(GPMC_CS_CONFIG6, 24, 28, "wr-access-ns");
@@ -460,8 +572,24 @@ static inline void gpmc_cs_show_timings(int cs, const char *desc)
 }
 #endif
 
-static int set_gpmc_timing_reg(int cs, int reg, int st_bit, int end_bit,
-			       int time, const char *name)
+/**
+ * set_gpmc_timing_reg - set a single timing parameter for Chip Select Region.
+ * Caller is expected to have initialized CONFIG1 GPMCFCLKDIVIDER
+ * prior to calling this function with @cd equal to GPMC_CD_CLK.
+ *
+ * @cs:      Chip Select Region.
+ * @reg:     GPMC_CS_CONFIGn register offset.
+ * @st_bit:  Start Bit
+ * @end_bit: End Bit. Must be >= @st_bit.
+ * @max:     Maximum parameter value.
+ *           If 0, maximum is as high as @st_bit and @end_bit allow.
+ * @time:    Timing parameter in ns.
+ * @cd:      Timing parameter clock domain.
+ * @name:    Timing parameter name.
+ * @return:  0 on success, -1 on error.
+ */
+static int set_gpmc_timing_reg(int cs, int reg, int st_bit, int end_bit, int max,
+			       int time, enum gpmc_clk_domain cd, const char *name)
 {
 	u32 l;
 	int ticks, mask, nr_bits;
@@ -469,22 +597,25 @@ static int set_gpmc_timing_reg(int cs, int reg, int st_bit, int end_bit,
 	if (time == 0)
 		ticks = 0;
 	else
-		ticks = gpmc_ns_to_ticks(time);
+		ticks = gpmc_ns_to_clk_ticks(time, cs, cd);
 	nr_bits = end_bit - st_bit + 1;
 	mask = (1 << nr_bits) - 1;
 
-	if (ticks > mask) {
-		pr_err("%s: GPMC error! CS%d: %s: %d ns, %d ticks > %d\n",
-		       __func__, cs, name, time, ticks, mask);
+	if (!max)
+		max = mask;
+
+	if (ticks > max) {
+		pr_err("%s: GPMC CS%d: %s %d ns, %d ticks > %d ticks\n",
+		       __func__, cs, name, time, ticks, max);
 
 		return -1;
 	}
 
 	l = gpmc_cs_read_reg(cs, reg);
 #ifdef DEBUG
-	printk(KERN_INFO
-		"GPMC CS%d: %-10s: %3d ticks, %3lu ns (was %3i ticks) %3d ns\n",
-	       cs, name, ticks, gpmc_get_fclk_period() * ticks / 1000,
+	pr_info(
+		"GPMC CS%d: %-17s: %3d ticks, %3lu ns (was %3i ticks) %3d ns\n",
+	       cs, name, ticks, gpmc_get_clk_period(cs, cd) * ticks / 1000,
 			(l >> st_bit) & mask, time);
 #endif
 	l &= ~(mask << st_bit);
@@ -494,18 +625,56 @@ static int set_gpmc_timing_reg(int cs, int reg, int st_bit, int end_bit,
 	return 0;
 }
 
-#define GPMC_SET_ONE(reg, st, end, field) \
-	if (set_gpmc_timing_reg(cs, (reg), (st), (end),		\
-			t->field, #field) < 0)			\
+#define GPMC_SET_ONE_CD_MAX(reg, st, end, max, field, cd)  \
+	if (set_gpmc_timing_reg(cs, (reg), (st), (end), (max), \
+	    t->field, (cd), #field) < 0)                       \
 		return -1
 
+#define GPMC_SET_ONE(reg, st, end, field) \
+	GPMC_SET_ONE_CD_MAX(reg, st, end, 0, field, GPMC_CD_FCLK)
+
+/**
+ * gpmc_calc_waitmonitoring_divider - calculate proper GPMCFCLKDIVIDER based on WAITMONITORINGTIME
+ * WAITMONITORINGTIME will be _at least_ as long as desired, i.e.
+ * read  --> don't sample bus too early
+ * write --> data is longer on bus
+ *
+ * Formula:
+ * gpmc_clk_div + 1 = ceil(ceil(waitmonitoringtime_ns / gpmc_fclk_ns)
+ *                    / waitmonitoring_ticks)
+ * WAITMONITORINGTIME resulting in 0 or 1 tick with div = 1 are caught by
+ * div <= 0 check.
+ *
+ * @wait_monitoring: WAITMONITORINGTIME in ns.
+ * @return:          -1 on failure to scale, else proper divider > 0.
+ */
+static int gpmc_calc_waitmonitoring_divider(unsigned int wait_monitoring)
+{
+
+	int div = gpmc_ns_to_ticks(wait_monitoring);
+
+	div += GPMC_CONFIG1_WAITMONITORINGTIME_MAX - 1;
+	div /= GPMC_CONFIG1_WAITMONITORINGTIME_MAX;
+
+	if (div > 4)
+		return -1;
+	if (div <= 0)
+		div = 1;
+
+	return div;
+
+}
+
+/**
+ * gpmc_calc_divider - calculate GPMC_FCLK divider for sync_clk GPMC_CLK period.
+ * @sync_clk: GPMC_CLK period in ps.
+ * @return:   Returns at least 1 if GPMC_FCLK can be divided to GPMC_CLK.
+ *            Else, returns -1.
+ */
 int gpmc_calc_divider(unsigned int sync_clk)
 {
-	int div;
-	u32 l;
+	int div = gpmc_ps_to_ticks(sync_clk);
 
-	l = sync_clk + (gpmc_get_fclk_period() - 1);
-	div = l / gpmc_get_fclk_period();
 	if (div > 4)
 		return -1;
 	if (div <= 0)
@@ -514,7 +683,15 @@ int gpmc_calc_divider(unsigned int sync_clk)
 	return div;
 }
 
-int gpmc_cs_set_timings(int cs, const struct gpmc_timings *t)
+/**
+ * gpmc_cs_set_timings - program timing parameters for Chip Select Region.
+ * @cs:     Chip Select Region.
+ * @t:      GPMC timing parameters.
+ * @s:      GPMC timing settings.
+ * @return: 0 on success, -1 on error.
+ */
+int gpmc_cs_set_timings(int cs, const struct gpmc_timings *t,
+			const struct gpmc_settings *s)
 {
 	int div;
 	u32 l;
@@ -524,6 +701,33 @@ int gpmc_cs_set_timings(int cs, const struct gpmc_timings *t)
 	if (div < 0)
 		return div;
 
+	/*
+	 * See if we need to change the divider for waitmonitoringtime.
+	 *
+	 * Calculate GPMCFCLKDIVIDER independent of gpmc,sync-clk-ps in DT for
+	 * pure asynchronous accesses, i.e. both read and write asynchronous.
+	 * However, only do so if WAITMONITORINGTIME is actually used, i.e.
+	 * either WAITREADMONITORING or WAITWRITEMONITORING is set.
+	 *
+	 * This statement must not change div to scale async WAITMONITORINGTIME
+	 * to protect mixed synchronous and asynchronous accesses.
+	 *
+	 * We raise an error later if WAITMONITORINGTIME does not fit.
+	 */
+	if (!s->sync_read && !s->sync_write &&
+	    (s->wait_on_read || s->wait_on_write)
+	   ) {
+
+		div = gpmc_calc_waitmonitoring_divider(t->wait_monitoring);
+		if (div < 0) {
+			pr_err("%s: waitmonitoringtime %3d ns too large for greatest gpmcfclkdivider.\n",
+			       __func__,
+			       t->wait_monitoring
+			       );
+			return -1;
+		}
+	}
+
 	GPMC_SET_ONE(GPMC_CS_CONFIG2,  0,  3, cs_on);
 	GPMC_SET_ONE(GPMC_CS_CONFIG2,  8, 12, cs_rd_off);
 	GPMC_SET_ONE(GPMC_CS_CONFIG2, 16, 20, cs_wr_off);
@@ -546,27 +750,27 @@ int gpmc_cs_set_timings(int cs, const struct gpmc_timings *t)
 	GPMC_SET_ONE(GPMC_CS_CONFIG6, 0, 3, bus_turnaround);
 	GPMC_SET_ONE(GPMC_CS_CONFIG6, 8, 11, cycle2cycle_delay);
 
-	GPMC_SET_ONE(GPMC_CS_CONFIG1, 18, 19, wait_monitoring);
-	GPMC_SET_ONE(GPMC_CS_CONFIG1, 25, 26, clk_activation);
-
 	if (gpmc_capability & GPMC_HAS_WR_DATA_MUX_BUS)
 		GPMC_SET_ONE(GPMC_CS_CONFIG6, 16, 19, wr_data_mux_bus);
 	if (gpmc_capability & GPMC_HAS_WR_ACCESS)
 		GPMC_SET_ONE(GPMC_CS_CONFIG6, 24, 28, wr_access);
 
-	/* caller is expected to have initialized CONFIG1 to cover
-	 * at least sync vs async
-	 */
 	l = gpmc_cs_read_reg(cs, GPMC_CS_CONFIG1);
-	if (l & (GPMC_CONFIG1_READTYPE_SYNC | GPMC_CONFIG1_WRITETYPE_SYNC)) {
+	l &= ~0x03;
+	l |= (div - 1);
+	gpmc_cs_write_reg(cs, GPMC_CS_CONFIG1, l);
+
+	GPMC_SET_ONE_CD_MAX(GPMC_CS_CONFIG1, 18, 19,
+			    GPMC_CONFIG1_WAITMONITORINGTIME_MAX,
+			    wait_monitoring, GPMC_CD_CLK);
+	GPMC_SET_ONE_CD_MAX(GPMC_CS_CONFIG1, 25, 26,
+			    GPMC_CONFIG1_CLKACTIVATIONTIME_MAX,
+			    clk_activation, GPMC_CD_FCLK);
+
 #ifdef DEBUG
-		printk(KERN_INFO "GPMC CS%d CLK period is %lu ns (div %d)\n",
-				cs, (div * gpmc_get_fclk_period()) / 1000, div);
+	pr_info("GPMC CS%d CLK period is %lu ns (div %d)\n",
+			cs, (div * gpmc_get_fclk_period()) / 1000, div);
 #endif
-		l &= ~0x03;
-		l |= (div - 1);
-		gpmc_cs_write_reg(cs, GPMC_CS_CONFIG1, l);
-	}
 
 	gpmc_cs_bool_timings(cs, &t->bool_timings);
 	gpmc_cs_show_timings(cs, "after gpmc_cs_set_timings");
@@ -586,12 +790,15 @@ static int gpmc_cs_set_memconf(int cs, u32 base, u32 size)
 	if (base & (size - 1))
 		return -EINVAL;
 
+	base >>= GPMC_CHUNK_SHIFT;
 	mask = (1 << GPMC_SECTION_SHIFT) - size;
+	mask >>= GPMC_CHUNK_SHIFT;
+	mask <<= GPMC_CONFIG7_MASKADDRESS_OFFSET;
+
 	l = gpmc_cs_read_reg(cs, GPMC_CS_CONFIG7);
-	l &= ~0x3f;
-	l = (base >> GPMC_CHUNK_SHIFT) & 0x3f;
-	l &= ~(0x0f << 8);
-	l |= ((mask >> GPMC_CHUNK_SHIFT) & 0x0f) << 8;
+	l &= ~GPMC_CONFIG7_MASK;
+	l |= base & GPMC_CONFIG7_BASEADDRESS_MASK;
+	l |= mask & GPMC_CONFIG7_MASKADDRESS_MASK;
 	l |= GPMC_CONFIG7_CSVALID;
 	gpmc_cs_write_reg(cs, GPMC_CS_CONFIG7, l);
 
@@ -656,7 +863,7 @@ static void gpmc_cs_set_name(int cs, const char *name)
 	gpmc->name = name;
 }
 
-const char *gpmc_cs_get_name(int cs)
+static const char *gpmc_cs_get_name(int cs)
 {
 	struct gpmc_cs_data *gpmc = &gpmc_cs[cs];
 
@@ -1786,7 +1993,7 @@ static int gpmc_probe_generic_child(struct platform_device *pdev,
 	if (ret < 0)
 		goto err;
 
-	ret = gpmc_cs_set_timings(cs, &gpmc_t);
+	ret = gpmc_cs_set_timings(cs, &gpmc_t, &gpmc_s);
 	if (ret) {
 		dev_err(&pdev->dev, "failed to set gpmc timings for: %s\n",
 			child->name);
@@ -1802,8 +2009,21 @@ static int gpmc_probe_generic_child(struct platform_device *pdev,
 	gpmc_cs_enable_mem(cs);
 
 no_timings:
-	if (of_platform_device_create(child, NULL, &pdev->dev))
-		return 0;
+
+	/* create platform device, NULL on error or when disabled */
+	if (!of_platform_device_create(child, NULL, &pdev->dev))
+		goto err_child_fail;
+
+	/* is child a common bus? */
+	if (of_match_node(of_default_bus_match_table, child))
+		/* create children and other common bus children */
+		if (of_platform_populate(child, of_default_bus_match_table,
+					 NULL, &pdev->dev))
+			goto err_child_fail;
+
+	return 0;
+
+err_child_fail:
 
 	dev_err(&pdev->dev, "failed to create gpmc child %s\n", child->name);
 	ret = -ENODEV;

drivers/soc/Kconfig

@@ -1,5 +1,6 @@
 menu "SOC (System On Chip) specific Drivers"
 
+source "drivers/soc/mediatek/Kconfig"
 source "drivers/soc/qcom/Kconfig"
 source "drivers/soc/ti/Kconfig"
 source "drivers/soc/versatile/Kconfig"

drivers/soc/Makefile

@@ -2,6 +2,7 @@
 # Makefile for the Linux Kernel SOC specific device drivers.
 #
 
+obj-$(CONFIG_ARCH_MEDIATEK)	+= mediatek/
 obj-$(CONFIG_ARCH_QCOM)		+= qcom/
 obj-$(CONFIG_ARCH_TEGRA)	+= tegra/
 obj-$(CONFIG_SOC_TI)		+= ti/

drivers/soc/mediatek/Kconfig

@@ -0,0 +1,11 @@
+#
+# MediaTek SoC drivers
+#
+config MTK_PMIC_WRAP
+	tristate "MediaTek PMIC Wrapper Support"
+	depends on ARCH_MEDIATEK
+	select REGMAP
+	help
+	  Say yes here to add support for MediaTek PMIC Wrapper found
+	  on different MediaTek SoCs. The PMIC wrapper is a proprietary
+	  hardware to connect the PMIC.

drivers/soc/mediatek/Makefile

@@ -0,0 +1 @@
+obj-$(CONFIG_MTK_PMIC_WRAP) += mtk-pmic-wrap.o

drivers/soc/mediatek/mtk-pmic-wrap.c

@@ -0,0 +1,975 @@
+/*
+ * Copyright (c) 2014 MediaTek Inc.
+ * Author: Flora Fu, MediaTek
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+#include <linux/clk.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/of_device.h>
+#include <linux/platform_device.h>
+#include <linux/regmap.h>
+#include <linux/reset.h>
+
+#define PWRAP_MT8135_BRIDGE_IORD_ARB_EN		0x4
+#define PWRAP_MT8135_BRIDGE_WACS3_EN		0x10
+#define PWRAP_MT8135_BRIDGE_INIT_DONE3		0x14
+#define PWRAP_MT8135_BRIDGE_WACS4_EN		0x24
+#define PWRAP_MT8135_BRIDGE_INIT_DONE4		0x28
+#define PWRAP_MT8135_BRIDGE_INT_EN		0x38
+#define PWRAP_MT8135_BRIDGE_TIMER_EN		0x48
+#define PWRAP_MT8135_BRIDGE_WDT_UNIT		0x50
+#define PWRAP_MT8135_BRIDGE_WDT_SRC_EN		0x54
+
+/* macro for wrapper status */
+#define PWRAP_GET_WACS_RDATA(x)		(((x) >> 0) & 0x0000ffff)
+#define PWRAP_GET_WACS_FSM(x)		(((x) >> 16) & 0x00000007)
+#define PWRAP_GET_WACS_REQ(x)		(((x) >> 19) & 0x00000001)
+#define PWRAP_STATE_SYNC_IDLE0		(1 << 20)
+#define PWRAP_STATE_INIT_DONE0		(1 << 21)
+
+/* macro for WACS FSM */
+#define PWRAP_WACS_FSM_IDLE		0x00
+#define PWRAP_WACS_FSM_REQ		0x02
+#define PWRAP_WACS_FSM_WFDLE		0x04
+#define PWRAP_WACS_FSM_WFVLDCLR		0x06
+#define PWRAP_WACS_INIT_DONE		0x01
+#define PWRAP_WACS_WACS_SYNC_IDLE	0x01
+#define PWRAP_WACS_SYNC_BUSY		0x00
+
+/* macro for device wrapper default value */
+#define PWRAP_DEW_READ_TEST_VAL		0x5aa5
+#define PWRAP_DEW_WRITE_TEST_VAL	0xa55a
+
+/* macro for manual command */
+#define PWRAP_MAN_CMD_SPI_WRITE		(1 << 13)
+#define PWRAP_MAN_CMD_OP_CSH		(0x0 << 8)
+#define PWRAP_MAN_CMD_OP_CSL		(0x1 << 8)
+#define PWRAP_MAN_CMD_OP_CK		(0x2 << 8)
+#define PWRAP_MAN_CMD_OP_OUTS		(0x8 << 8)
+#define PWRAP_MAN_CMD_OP_OUTD		(0x9 << 8)
+#define PWRAP_MAN_CMD_OP_OUTQ		(0xa << 8)
+
+/* macro for slave device wrapper registers */
+#define PWRAP_DEW_BASE			0xbc00
+#define PWRAP_DEW_EVENT_OUT_EN		(PWRAP_DEW_BASE + 0x0)
+#define PWRAP_DEW_DIO_EN		(PWRAP_DEW_BASE + 0x2)
+#define PWRAP_DEW_EVENT_SRC_EN		(PWRAP_DEW_BASE + 0x4)
+#define PWRAP_DEW_EVENT_SRC		(PWRAP_DEW_BASE + 0x6)
+#define PWRAP_DEW_EVENT_FLAG		(PWRAP_DEW_BASE + 0x8)
+#define PWRAP_DEW_READ_TEST		(PWRAP_DEW_BASE + 0xa)
+#define PWRAP_DEW_WRITE_TEST		(PWRAP_DEW_BASE + 0xc)
+#define PWRAP_DEW_CRC_EN		(PWRAP_DEW_BASE + 0xe)
+#define PWRAP_DEW_CRC_VAL		(PWRAP_DEW_BASE + 0x10)
+#define PWRAP_DEW_MON_GRP_SEL		(PWRAP_DEW_BASE + 0x12)
+#define PWRAP_DEW_MON_FLAG_SEL		(PWRAP_DEW_BASE + 0x14)
+#define PWRAP_DEW_EVENT_TEST		(PWRAP_DEW_BASE + 0x16)
+#define PWRAP_DEW_CIPHER_KEY_SEL	(PWRAP_DEW_BASE + 0x18)
+#define PWRAP_DEW_CIPHER_IV_SEL		(PWRAP_DEW_BASE + 0x1a)
+#define PWRAP_DEW_CIPHER_LOAD		(PWRAP_DEW_BASE + 0x1c)
+#define PWRAP_DEW_CIPHER_START		(PWRAP_DEW_BASE + 0x1e)
+#define PWRAP_DEW_CIPHER_RDY		(PWRAP_DEW_BASE + 0x20)
+#define PWRAP_DEW_CIPHER_MODE		(PWRAP_DEW_BASE + 0x22)
+#define PWRAP_DEW_CIPHER_SWRST		(PWRAP_DEW_BASE + 0x24)
+#define PWRAP_MT8173_DEW_CIPHER_IV0	(PWRAP_DEW_BASE + 0x26)
+#define PWRAP_MT8173_DEW_CIPHER_IV1	(PWRAP_DEW_BASE + 0x28)
+#define PWRAP_MT8173_DEW_CIPHER_IV2	(PWRAP_DEW_BASE + 0x2a)
+#define PWRAP_MT8173_DEW_CIPHER_IV3	(PWRAP_DEW_BASE + 0x2c)
+#define PWRAP_MT8173_DEW_CIPHER_IV4	(PWRAP_DEW_BASE + 0x2e)
+#define PWRAP_MT8173_DEW_CIPHER_IV5	(PWRAP_DEW_BASE + 0x30)
+
+enum pwrap_regs {
+	PWRAP_MUX_SEL,
+	PWRAP_WRAP_EN,
+	PWRAP_DIO_EN,
+	PWRAP_SIDLY,
+	PWRAP_CSHEXT_WRITE,
+	PWRAP_CSHEXT_READ,
+	PWRAP_CSLEXT_START,
+	PWRAP_CSLEXT_END,
+	PWRAP_STAUPD_PRD,
+	PWRAP_STAUPD_GRPEN,
+	PWRAP_STAUPD_MAN_TRIG,
+	PWRAP_STAUPD_STA,
+	PWRAP_WRAP_STA,
+	PWRAP_HARB_INIT,
+	PWRAP_HARB_HPRIO,
+	PWRAP_HIPRIO_ARB_EN,
+	PWRAP_HARB_STA0,
+	PWRAP_HARB_STA1,
+	PWRAP_MAN_EN,
+	PWRAP_MAN_CMD,
+	PWRAP_MAN_RDATA,
+	PWRAP_MAN_VLDCLR,
+	PWRAP_WACS0_EN,
+	PWRAP_INIT_DONE0,
+	PWRAP_WACS0_CMD,
+	PWRAP_WACS0_RDATA,
+	PWRAP_WACS0_VLDCLR,
+	PWRAP_WACS1_EN,
+	PWRAP_INIT_DONE1,
+	PWRAP_WACS1_CMD,
+	PWRAP_WACS1_RDATA,
+	PWRAP_WACS1_VLDCLR,
+	PWRAP_WACS2_EN,
+	PWRAP_INIT_DONE2,
+	PWRAP_WACS2_CMD,
+	PWRAP_WACS2_RDATA,
+	PWRAP_WACS2_VLDCLR,
+	PWRAP_INT_EN,
+	PWRAP_INT_FLG_RAW,
+	PWRAP_INT_FLG,
+	PWRAP_INT_CLR,
+	PWRAP_SIG_ADR,
+	PWRAP_SIG_MODE,
+	PWRAP_SIG_VALUE,
+	PWRAP_SIG_ERRVAL,
+	PWRAP_CRC_EN,
+	PWRAP_TIMER_EN,
+	PWRAP_TIMER_STA,
+	PWRAP_WDT_UNIT,
+	PWRAP_WDT_SRC_EN,
+	PWRAP_WDT_FLG,
+	PWRAP_DEBUG_INT_SEL,
+	PWRAP_CIPHER_KEY_SEL,
+	PWRAP_CIPHER_IV_SEL,
+	PWRAP_CIPHER_RDY,
+	PWRAP_CIPHER_MODE,
+	PWRAP_CIPHER_SWRST,
+	PWRAP_DCM_EN,
+	PWRAP_DCM_DBC_PRD,
+
+	/* MT8135 only regs */
+	PWRAP_CSHEXT,
+	PWRAP_EVENT_IN_EN,
+	PWRAP_EVENT_DST_EN,
+	PWRAP_RRARB_INIT,
+	PWRAP_RRARB_EN,
+	PWRAP_RRARB_STA0,
+	PWRAP_RRARB_STA1,
+	PWRAP_EVENT_STA,
+	PWRAP_EVENT_STACLR,
+	PWRAP_CIPHER_LOAD,
+	PWRAP_CIPHER_START,
+
+	/* MT8173 only regs */
+	PWRAP_RDDMY,
+	PWRAP_SI_CK_CON,
+	PWRAP_DVFS_ADR0,
+	PWRAP_DVFS_WDATA0,
+	PWRAP_DVFS_ADR1,
+	PWRAP_DVFS_WDATA1,
+	PWRAP_DVFS_ADR2,
+	PWRAP_DVFS_WDATA2,
+	PWRAP_DVFS_ADR3,
+	PWRAP_DVFS_WDATA3,
+	PWRAP_DVFS_ADR4,
+	PWRAP_DVFS_WDATA4,
+	PWRAP_DVFS_ADR5,
+	PWRAP_DVFS_WDATA5,
+	PWRAP_DVFS_ADR6,
+	PWRAP_DVFS_WDATA6,
+	PWRAP_DVFS_ADR7,
+	PWRAP_DVFS_WDATA7,
+	PWRAP_SPMINF_STA,
+	PWRAP_CIPHER_EN,
+};
+
+static int mt8173_regs[] = {
+	[PWRAP_MUX_SEL] =		0x0,
+	[PWRAP_WRAP_EN] =		0x4,
+	[PWRAP_DIO_EN] =		0x8,
+	[PWRAP_SIDLY] =			0xc,
+	[PWRAP_RDDMY] =			0x10,
+	[PWRAP_SI_CK_CON] =		0x14,
+	[PWRAP_CSHEXT_WRITE] =		0x18,
+	[PWRAP_CSHEXT_READ] =		0x1c,
+	[PWRAP_CSLEXT_START] =		0x20,
+	[PWRAP_CSLEXT_END] =		0x24,
+	[PWRAP_STAUPD_PRD] =		0x28,
+	[PWRAP_STAUPD_GRPEN] =		0x2c,
+	[PWRAP_STAUPD_MAN_TRIG] =	0x40,
+	[PWRAP_STAUPD_STA] =		0x44,
+	[PWRAP_WRAP_STA] =		0x48,
+	[PWRAP_HARB_INIT] =		0x4c,
+	[PWRAP_HARB_HPRIO] =		0x50,
+	[PWRAP_HIPRIO_ARB_EN] =		0x54,
+	[PWRAP_HARB_STA0] =		0x58,
+	[PWRAP_HARB_STA1] =		0x5c,
+	[PWRAP_MAN_EN] =		0x60,
+	[PWRAP_MAN_CMD] =		0x64,
+	[PWRAP_MAN_RDATA] =		0x68,
+	[PWRAP_MAN_VLDCLR] =		0x6c,
+	[PWRAP_WACS0_EN] =		0x70,
+	[PWRAP_INIT_DONE0] =		0x74,
+	[PWRAP_WACS0_CMD] =		0x78,
+	[PWRAP_WACS0_RDATA] =		0x7c,
+	[PWRAP_WACS0_VLDCLR] =		0x80,
+	[PWRAP_WACS1_EN] =		0x84,
+	[PWRAP_INIT_DONE1] =		0x88,
+	[PWRAP_WACS1_CMD] =		0x8c,
+	[PWRAP_WACS1_RDATA] =		0x90,
+	[PWRAP_WACS1_VLDCLR] =		0x94,
+	[PWRAP_WACS2_EN] =		0x98,
+	[PWRAP_INIT_DONE2] =		0x9c,
+	[PWRAP_WACS2_CMD] =		0xa0,
+	[PWRAP_WACS2_RDATA] =		0xa4,
+	[PWRAP_WACS2_VLDCLR] =		0xa8,
+	[PWRAP_INT_EN] =		0xac,
+	[PWRAP_INT_FLG_RAW] =		0xb0,
+	[PWRAP_INT_FLG] =		0xb4,
+	[PWRAP_INT_CLR] =		0xb8,
+	[PWRAP_SIG_ADR] =		0xbc,
+	[PWRAP_SIG_MODE] =		0xc0,
+	[PWRAP_SIG_VALUE] =		0xc4,
+	[PWRAP_SIG_ERRVAL] =		0xc8,
+	[PWRAP_CRC_EN] =		0xcc,
+	[PWRAP_TIMER_EN] =		0xd0,
+	[PWRAP_TIMER_STA] =		0xd4,
+	[PWRAP_WDT_UNIT] =		0xd8,
+	[PWRAP_WDT_SRC_EN] =		0xdc,
+	[PWRAP_WDT_FLG] =		0xe0,
+	[PWRAP_DEBUG_INT_SEL] =		0xe4,
+	[PWRAP_DVFS_ADR0] =		0xe8,
+	[PWRAP_DVFS_WDATA0] =		0xec,
+	[PWRAP_DVFS_ADR1] =		0xf0,
+	[PWRAP_DVFS_WDATA1] =		0xf4,
+	[PWRAP_DVFS_ADR2] =		0xf8,
+	[PWRAP_DVFS_WDATA2] =		0xfc,
+	[PWRAP_DVFS_ADR3] =		0x100,
+	[PWRAP_DVFS_WDATA3] =		0x104,
+	[PWRAP_DVFS_ADR4] =		0x108,
+	[PWRAP_DVFS_WDATA4] =		0x10c,
+	[PWRAP_DVFS_ADR5] =		0x110,
+	[PWRAP_DVFS_WDATA5] =		0x114,
+	[PWRAP_DVFS_ADR6] =		0x118,
+	[PWRAP_DVFS_WDATA6] =		0x11c,
+	[PWRAP_DVFS_ADR7] =		0x120,
+	[PWRAP_DVFS_WDATA7] =		0x124,
+	[PWRAP_SPMINF_STA] =		0x128,
+	[PWRAP_CIPHER_KEY_SEL] =	0x12c,
+	[PWRAP_CIPHER_IV_SEL] =		0x130,
+	[PWRAP_CIPHER_EN] =		0x134,
+	[PWRAP_CIPHER_RDY] =		0x138,
+	[PWRAP_CIPHER_MODE] =		0x13c,
+	[PWRAP_CIPHER_SWRST] =		0x140,
+	[PWRAP_DCM_EN] =		0x144,
+	[PWRAP_DCM_DBC_PRD] =		0x148,
+};
+
+static int mt8135_regs[] = {
+	[PWRAP_MUX_SEL] =		0x0,
+	[PWRAP_WRAP_EN] =		0x4,
+	[PWRAP_DIO_EN] =		0x8,
+	[PWRAP_SIDLY] =			0xc,
+	[PWRAP_CSHEXT] =		0x10,
+	[PWRAP_CSHEXT_WRITE] =		0x14,
+	[PWRAP_CSHEXT_READ] =		0x18,
+	[PWRAP_CSLEXT_START] =		0x1c,
+	[PWRAP_CSLEXT_END] =		0x20,
+	[PWRAP_STAUPD_PRD] =		0x24,
+	[PWRAP_STAUPD_GRPEN] =		0x28,
+	[PWRAP_STAUPD_MAN_TRIG] =	0x2c,
+	[PWRAP_STAUPD_STA] =		0x30,
+	[PWRAP_EVENT_IN_EN] =		0x34,
+	[PWRAP_EVENT_DST_EN] =		0x38,
+	[PWRAP_WRAP_STA] =		0x3c,
+	[PWRAP_RRARB_INIT] =		0x40,
+	[PWRAP_RRARB_EN] =		0x44,
+	[PWRAP_RRARB_STA0] =		0x48,
+	[PWRAP_RRARB_STA1] =		0x4c,
+	[PWRAP_HARB_INIT] =		0x50,
+	[PWRAP_HARB_HPRIO] =		0x54,
+	[PWRAP_HIPRIO_ARB_EN] =		0x58,
+	[PWRAP_HARB_STA0] =		0x5c,
+	[PWRAP_HARB_STA1] =		0x60,
+	[PWRAP_MAN_EN] =		0x64,
+	[PWRAP_MAN_CMD] =		0x68,
+	[PWRAP_MAN_RDATA] =		0x6c,
+	[PWRAP_MAN_VLDCLR] =		0x70,
+	[PWRAP_WACS0_EN] =		0x74,
+	[PWRAP_INIT_DONE0] =		0x78,
+	[PWRAP_WACS0_CMD] =		0x7c,
+	[PWRAP_WACS0_RDATA] =		0x80,
+	[PWRAP_WACS0_VLDCLR] =		0x84,
+	[PWRAP_WACS1_EN] =		0x88,
+	[PWRAP_INIT_DONE1] =		0x8c,
+	[PWRAP_WACS1_CMD] =		0x90,
+	[PWRAP_WACS1_RDATA] =		0x94,
+	[PWRAP_WACS1_VLDCLR] =		0x98,
+	[PWRAP_WACS2_EN] =		0x9c,
+	[PWRAP_INIT_DONE2] =		0xa0,
+	[PWRAP_WACS2_CMD] =		0xa4,
+	[PWRAP_WACS2_RDATA] =		0xa8,
+	[PWRAP_WACS2_VLDCLR] =		0xac,
+	[PWRAP_INT_EN] =		0xb0,
+	[PWRAP_INT_FLG_RAW] =		0xb4,
+	[PWRAP_INT_FLG] =		0xb8,
+	[PWRAP_INT_CLR] =		0xbc,
+	[PWRAP_SIG_ADR] =		0xc0,
+	[PWRAP_SIG_MODE] =		0xc4,
+	[PWRAP_SIG_VALUE] =		0xc8,
+	[PWRAP_SIG_ERRVAL] =		0xcc,
+	[PWRAP_CRC_EN] =		0xd0,
+	[PWRAP_EVENT_STA] =		0xd4,
+	[PWRAP_EVENT_STACLR] =		0xd8,
+	[PWRAP_TIMER_EN] =		0xdc,
+	[PWRAP_TIMER_STA] =		0xe0,
+	[PWRAP_WDT_UNIT] =		0xe4,
+	[PWRAP_WDT_SRC_EN] =		0xe8,
+	[PWRAP_WDT_FLG] =		0xec,
+	[PWRAP_DEBUG_INT_SEL] =		0xf0,
+	[PWRAP_CIPHER_KEY_SEL] =	0x134,
+	[PWRAP_CIPHER_IV_SEL] =		0x138,
+	[PWRAP_CIPHER_LOAD] =		0x13c,
+	[PWRAP_CIPHER_START] =		0x140,
+	[PWRAP_CIPHER_RDY] =		0x144,
+	[PWRAP_CIPHER_MODE] =		0x148,
+	[PWRAP_CIPHER_SWRST] =		0x14c,
+	[PWRAP_DCM_EN] =		0x15c,
+	[PWRAP_DCM_DBC_PRD] =		0x160,
+};
+
+enum pwrap_type {
+	PWRAP_MT8135,
+	PWRAP_MT8173,
+};
+
+struct pmic_wrapper_type {
+	int *regs;
+	enum pwrap_type type;
+	u32 arb_en_all;
+};
+
+static struct pmic_wrapper_type pwrap_mt8135 = {
+	.regs = mt8135_regs,
+	.type = PWRAP_MT8135,
+	.arb_en_all = 0x1ff,
+};
+
+static struct pmic_wrapper_type pwrap_mt8173 = {
+	.regs = mt8173_regs,
+	.type = PWRAP_MT8173,
+	.arb_en_all = 0x3f,
+};
+
+struct pmic_wrapper {
+	struct device *dev;
+	void __iomem *base;
+	struct regmap *regmap;
+	int *regs;
+	enum pwrap_type type;
+	u32 arb_en_all;
+	struct clk *clk_spi;
+	struct clk *clk_wrap;
+	struct reset_control *rstc;
+
+	struct reset_control *rstc_bridge;
+	void __iomem *bridge_base;
+};
+
+static inline int pwrap_is_mt8135(struct pmic_wrapper *wrp)
+{
+	return wrp->type == PWRAP_MT8135;
+}
+
+static inline int pwrap_is_mt8173(struct pmic_wrapper *wrp)
+{
+	return wrp->type == PWRAP_MT8173;
+}
+
+static u32 pwrap_readl(struct pmic_wrapper *wrp, enum pwrap_regs reg)
+{
+	return readl(wrp->base + wrp->regs[reg]);
+}
+
+static void pwrap_writel(struct pmic_wrapper *wrp, u32 val, enum pwrap_regs reg)
+{
+	writel(val, wrp->base + wrp->regs[reg]);
+}
+
+static bool pwrap_is_fsm_idle(struct pmic_wrapper *wrp)
+{
+	u32 val = pwrap_readl(wrp, PWRAP_WACS2_RDATA);
+
+	return PWRAP_GET_WACS_FSM(val) == PWRAP_WACS_FSM_IDLE;
+}
+
+static bool pwrap_is_fsm_vldclr(struct pmic_wrapper *wrp)
+{
+	u32 val = pwrap_readl(wrp, PWRAP_WACS2_RDATA);
+
+	return PWRAP_GET_WACS_FSM(val) == PWRAP_WACS_FSM_WFVLDCLR;
+}
+
+static bool pwrap_is_sync_idle(struct pmic_wrapper *wrp)
+{
+	return pwrap_readl(wrp, PWRAP_WACS2_RDATA) & PWRAP_STATE_SYNC_IDLE0;
+}
+
+static bool pwrap_is_fsm_idle_and_sync_idle(struct pmic_wrapper *wrp)
+{
+	u32 val = pwrap_readl(wrp, PWRAP_WACS2_RDATA);
+
+	return (PWRAP_GET_WACS_FSM(val) == PWRAP_WACS_FSM_IDLE) &&
+		(val & PWRAP_STATE_SYNC_IDLE0);
+}
+
+static int pwrap_wait_for_state(struct pmic_wrapper *wrp,
+		bool (*fp)(struct pmic_wrapper *))
+{
+	unsigned long timeout;
+
+	timeout = jiffies + usecs_to_jiffies(255);
+
+	do {
+		if (time_after(jiffies, timeout))
+			return fp(wrp) ? 0 : -ETIMEDOUT;
+		if (fp(wrp))
+			return 0;
+	} while (1);
+}
+
+static int pwrap_write(struct pmic_wrapper *wrp, u32 adr, u32 wdata)
+{
+	int ret;
+	u32 val;
+
+	val = pwrap_readl(wrp, PWRAP_WACS2_RDATA);
+	if (PWRAP_GET_WACS_FSM(val) == PWRAP_WACS_FSM_WFVLDCLR)
+		pwrap_writel(wrp, 1, PWRAP_WACS2_VLDCLR);
+
+	ret = pwrap_wait_for_state(wrp, pwrap_is_fsm_idle);
+	if (ret)
+		return ret;
+
+	pwrap_writel(wrp, (1 << 31) | ((adr >> 1) << 16) | wdata,
+			PWRAP_WACS2_CMD);
+
+	return 0;
+}
+
+static int pwrap_read(struct pmic_wrapper *wrp, u32 adr, u32 *rdata)
+{
+	int ret;
+	u32 val;
+
+	val = pwrap_readl(wrp, PWRAP_WACS2_RDATA);
+	if (PWRAP_GET_WACS_FSM(val) == PWRAP_WACS_FSM_WFVLDCLR)
+		pwrap_writel(wrp, 1, PWRAP_WACS2_VLDCLR);
+
+	ret = pwrap_wait_for_state(wrp, pwrap_is_fsm_idle);
+	if (ret)
+		return ret;
+
+	pwrap_writel(wrp, (adr >> 1) << 16, PWRAP_WACS2_CMD);
+
+	ret = pwrap_wait_for_state(wrp, pwrap_is_fsm_vldclr);
+	if (ret)
+		return ret;
+
+	*rdata = PWRAP_GET_WACS_RDATA(pwrap_readl(wrp, PWRAP_WACS2_RDATA));
+
+	return 0;
+}
+
+static int pwrap_regmap_read(void *context, u32 adr, u32 *rdata)
+{
+	return pwrap_read(context, adr, rdata);
+}
+
+static int pwrap_regmap_write(void *context, u32 adr, u32 wdata)
+{
+	return pwrap_write(context, adr, wdata);
+}
+
+static int pwrap_reset_spislave(struct pmic_wrapper *wrp)
+{
+	int ret, i;
+
+	pwrap_writel(wrp, 0, PWRAP_HIPRIO_ARB_EN);
+	pwrap_writel(wrp, 0, PWRAP_WRAP_EN);
+	pwrap_writel(wrp, 1, PWRAP_MUX_SEL);
+	pwrap_writel(wrp, 1, PWRAP_MAN_EN);
+	pwrap_writel(wrp, 0, PWRAP_DIO_EN);
+
+	pwrap_writel(wrp, PWRAP_MAN_CMD_SPI_WRITE | PWRAP_MAN_CMD_OP_CSL,
+			PWRAP_MAN_CMD);
+	pwrap_writel(wrp, PWRAP_MAN_CMD_SPI_WRITE | PWRAP_MAN_CMD_OP_OUTS,
+			PWRAP_MAN_CMD);
+	pwrap_writel(wrp, PWRAP_MAN_CMD_SPI_WRITE | PWRAP_MAN_CMD_OP_CSH,
+			PWRAP_MAN_CMD);
+
+	for (i = 0; i < 4; i++)
+		pwrap_writel(wrp, PWRAP_MAN_CMD_SPI_WRITE | PWRAP_MAN_CMD_OP_OUTS,
+				PWRAP_MAN_CMD);
+
+	ret = pwrap_wait_for_state(wrp, pwrap_is_sync_idle);
+	if (ret) {
+		dev_err(wrp->dev, "%s fail, ret=%d\n", __func__, ret);
+		return ret;
+	}
+
+	pwrap_writel(wrp, 0, PWRAP_MAN_EN);
+	pwrap_writel(wrp, 0, PWRAP_MUX_SEL);
+
+	return 0;
+}
+
+/*
+ * pwrap_init_sidly - configure serial input delay
+ *
+ * This configures the serial input delay. We can configure 0, 2, 4 or 6ns
+ * delay. Do a read test with all possible values and chose the best delay.
+ */
+static int pwrap_init_sidly(struct pmic_wrapper *wrp)
+{
+	u32 rdata;
+	u32 i;
+	u32 pass = 0;
+	signed char dly[16] = {
+		-1, 0, 1, 0, 2, -1, 1, 1, 3, -1, -1, -1, 3, -1, 2, 1
+	};
+
+	for (i = 0; i < 4; i++) {
+		pwrap_writel(wrp, i, PWRAP_SIDLY);
+		pwrap_read(wrp, PWRAP_DEW_READ_TEST, &rdata);
+		if (rdata == PWRAP_DEW_READ_TEST_VAL) {
+			dev_dbg(wrp->dev, "[Read Test] pass, SIDLY=%x\n", i);
+			pass |= 1 << i;
+		}
+	}
+
+	if (dly[pass] < 0) {
+		dev_err(wrp->dev, "sidly pass range 0x%x not continuous\n",
+				pass);
+		return -EIO;
+	}
+
+	pwrap_writel(wrp, dly[pass], PWRAP_SIDLY);
+
+	return 0;
+}
+
+static int pwrap_init_reg_clock(struct pmic_wrapper *wrp)
+{
+	unsigned long rate_spi;
+	int ck_mhz;
+
+	rate_spi = clk_get_rate(wrp->clk_spi);
+
+	if (rate_spi > 26000000)
+		ck_mhz = 26;
+	else if (rate_spi > 18000000)
+		ck_mhz = 18;
+	else
+		ck_mhz = 0;
+
+	switch (ck_mhz) {
+	case 18:
+		if (pwrap_is_mt8135(wrp))
+			pwrap_writel(wrp, 0xc, PWRAP_CSHEXT);
+		pwrap_writel(wrp, 0x4, PWRAP_CSHEXT_WRITE);
+		pwrap_writel(wrp, 0xc, PWRAP_CSHEXT_READ);
+		pwrap_writel(wrp, 0x0, PWRAP_CSLEXT_START);
+		pwrap_writel(wrp, 0x0, PWRAP_CSLEXT_END);
+		break;
+	case 26:
+		if (pwrap_is_mt8135(wrp))
+			pwrap_writel(wrp, 0x4, PWRAP_CSHEXT);
+		pwrap_writel(wrp, 0x0, PWRAP_CSHEXT_WRITE);
+		pwrap_writel(wrp, 0x4, PWRAP_CSHEXT_READ);
+		pwrap_writel(wrp, 0x0, PWRAP_CSLEXT_START);
+		pwrap_writel(wrp, 0x0, PWRAP_CSLEXT_END);
+		break;
+	case 0:
+		if (pwrap_is_mt8135(wrp))
+			pwrap_writel(wrp, 0xf, PWRAP_CSHEXT);
+		pwrap_writel(wrp, 0xf, PWRAP_CSHEXT_WRITE);
+		pwrap_writel(wrp, 0xf, PWRAP_CSHEXT_READ);
+		pwrap_writel(wrp, 0xf, PWRAP_CSLEXT_START);
+		pwrap_writel(wrp, 0xf, PWRAP_CSLEXT_END);
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+static bool pwrap_is_cipher_ready(struct pmic_wrapper *wrp)
+{
+	return pwrap_readl(wrp, PWRAP_CIPHER_RDY) & 1;
+}
+
+static bool pwrap_is_pmic_cipher_ready(struct pmic_wrapper *wrp)
+{
+	u32 rdata;
+	int ret;
+
+	ret = pwrap_read(wrp, PWRAP_DEW_CIPHER_RDY, &rdata);
+	if (ret)
+		return 0;
+
+	return rdata == 1;
+}
+
+static int pwrap_init_cipher(struct pmic_wrapper *wrp)
+{
+	int ret;
+	u32 rdata;
+
+	pwrap_writel(wrp, 0x1, PWRAP_CIPHER_SWRST);
+	pwrap_writel(wrp, 0x0, PWRAP_CIPHER_SWRST);
+	pwrap_writel(wrp, 0x1, PWRAP_CIPHER_KEY_SEL);
+	pwrap_writel(wrp, 0x2, PWRAP_CIPHER_IV_SEL);
+
+	if (pwrap_is_mt8135(wrp)) {
+		pwrap_writel(wrp, 1, PWRAP_CIPHER_LOAD);
+		pwrap_writel(wrp, 1, PWRAP_CIPHER_START);
+	} else {
+		pwrap_writel(wrp, 1, PWRAP_CIPHER_EN);
+	}
+
+	/* Config cipher mode @PMIC */
+	pwrap_write(wrp, PWRAP_DEW_CIPHER_SWRST, 0x1);
+	pwrap_write(wrp, PWRAP_DEW_CIPHER_SWRST, 0x0);
+	pwrap_write(wrp, PWRAP_DEW_CIPHER_KEY_SEL, 0x1);
+	pwrap_write(wrp, PWRAP_DEW_CIPHER_IV_SEL, 0x2);
+	pwrap_write(wrp, PWRAP_DEW_CIPHER_LOAD, 0x1);
+	pwrap_write(wrp, PWRAP_DEW_CIPHER_START, 0x1);
+
+	/* wait for cipher data ready@AP */
+	ret = pwrap_wait_for_state(wrp, pwrap_is_cipher_ready);
+	if (ret) {
+		dev_err(wrp->dev, "cipher data ready@AP fail, ret=%d\n", ret);
+		return ret;
+	}
+
+	/* wait for cipher data ready@PMIC */
+	ret = pwrap_wait_for_state(wrp, pwrap_is_pmic_cipher_ready);
+	if (ret) {
+		dev_err(wrp->dev, "timeout waiting for cipher data ready@PMIC\n");
+		return ret;
+	}
+
+	/* wait for cipher mode idle */
+	pwrap_write(wrp, PWRAP_DEW_CIPHER_MODE, 0x1);
+	ret = pwrap_wait_for_state(wrp, pwrap_is_fsm_idle_and_sync_idle);
+	if (ret) {
+		dev_err(wrp->dev, "cipher mode idle fail, ret=%d\n", ret);
+		return ret;
+	}
+
+	pwrap_writel(wrp, 1, PWRAP_CIPHER_MODE);
+
+	/* Write Test */
+	if (pwrap_write(wrp, PWRAP_DEW_WRITE_TEST, PWRAP_DEW_WRITE_TEST_VAL) ||
+	    pwrap_read(wrp, PWRAP_DEW_WRITE_TEST, &rdata) ||
+			(rdata != PWRAP_DEW_WRITE_TEST_VAL)) {
+		dev_err(wrp->dev, "rdata=0x%04X\n", rdata);
+		return -EFAULT;
+	}
+
+	return 0;
+}
+
+static int pwrap_init(struct pmic_wrapper *wrp)
+{
+	int ret;
+	u32 rdata;
+
+	reset_control_reset(wrp->rstc);
+	if (wrp->rstc_bridge)
+		reset_control_reset(wrp->rstc_bridge);
+
+	if (pwrap_is_mt8173(wrp)) {
+		/* Enable DCM */
+		pwrap_writel(wrp, 3, PWRAP_DCM_EN);
+		pwrap_writel(wrp, 0, PWRAP_DCM_DBC_PRD);
+	}
+
+	/* Reset SPI slave */
+	ret = pwrap_reset_spislave(wrp);
+	if (ret)
+		return ret;
+
+	pwrap_writel(wrp, 1, PWRAP_WRAP_EN);
+
+	pwrap_writel(wrp, wrp->arb_en_all, PWRAP_HIPRIO_ARB_EN);
+
+	pwrap_writel(wrp, 1, PWRAP_WACS2_EN);
+
+	ret = pwrap_init_reg_clock(wrp);
+	if (ret)
+		return ret;
+
+	/* Setup serial input delay */
+	ret = pwrap_init_sidly(wrp);
+	if (ret)
+		return ret;
+
+	/* Enable dual IO mode */
+	pwrap_write(wrp, PWRAP_DEW_DIO_EN, 1);
+
+	/* Check IDLE & INIT_DONE in advance */
+	ret = pwrap_wait_for_state(wrp, pwrap_is_fsm_idle_and_sync_idle);
+	if (ret) {
+		dev_err(wrp->dev, "%s fail, ret=%d\n", __func__, ret);
+		return ret;
+	}
+
+	pwrap_writel(wrp, 1, PWRAP_DIO_EN);
+
+	/* Read Test */
+	pwrap_read(wrp, PWRAP_DEW_READ_TEST, &rdata);
+	if (rdata != PWRAP_DEW_READ_TEST_VAL) {
+		dev_err(wrp->dev, "Read test failed after switch to DIO mode: 0x%04x != 0x%04x\n",
+				PWRAP_DEW_READ_TEST_VAL, rdata);
+		return -EFAULT;
+	}
+
+	/* Enable encryption */
+	ret = pwrap_init_cipher(wrp);
+	if (ret)
+		return ret;
+
+	/* Signature checking - using CRC */
+	if (pwrap_write(wrp, PWRAP_DEW_CRC_EN, 0x1))
+		return -EFAULT;
+
+	pwrap_writel(wrp, 0x1, PWRAP_CRC_EN);
+	pwrap_writel(wrp, 0x0, PWRAP_SIG_MODE);
+	pwrap_writel(wrp, PWRAP_DEW_CRC_VAL, PWRAP_SIG_ADR);
+	pwrap_writel(wrp, wrp->arb_en_all, PWRAP_HIPRIO_ARB_EN);
+
+	if (pwrap_is_mt8135(wrp))
+		pwrap_writel(wrp, 0x7, PWRAP_RRARB_EN);
+
+	pwrap_writel(wrp, 0x1, PWRAP_WACS0_EN);
+	pwrap_writel(wrp, 0x1, PWRAP_WACS1_EN);
+	pwrap_writel(wrp, 0x1, PWRAP_WACS2_EN);
+	pwrap_writel(wrp, 0x5, PWRAP_STAUPD_PRD);
+	pwrap_writel(wrp, 0xff, PWRAP_STAUPD_GRPEN);
+	pwrap_writel(wrp, 0xf, PWRAP_WDT_UNIT);
+	pwrap_writel(wrp, 0xffffffff, PWRAP_WDT_SRC_EN);
+	pwrap_writel(wrp, 0x1, PWRAP_TIMER_EN);
+	pwrap_writel(wrp, ~((1 << 31) | (1 << 1)), PWRAP_INT_EN);
+
+	if (pwrap_is_mt8135(wrp)) {
+		/* enable pwrap events and pwrap bridge in AP side */
+		pwrap_writel(wrp, 0x1, PWRAP_EVENT_IN_EN);
+		pwrap_writel(wrp, 0xffff, PWRAP_EVENT_DST_EN);
+		writel(0x7f, wrp->bridge_base + PWRAP_MT8135_BRIDGE_IORD_ARB_EN);
+		writel(0x1, wrp->bridge_base + PWRAP_MT8135_BRIDGE_WACS3_EN);
+		writel(0x1, wrp->bridge_base + PWRAP_MT8135_BRIDGE_WACS4_EN);
+		writel(0x1, wrp->bridge_base + PWRAP_MT8135_BRIDGE_WDT_UNIT);
+		writel(0xffff, wrp->bridge_base + PWRAP_MT8135_BRIDGE_WDT_SRC_EN);
+		writel(0x1, wrp->bridge_base + PWRAP_MT8135_BRIDGE_TIMER_EN);
+		writel(0x7ff, wrp->bridge_base + PWRAP_MT8135_BRIDGE_INT_EN);
+
+		/* enable PMIC event out and sources */
+		if (pwrap_write(wrp, PWRAP_DEW_EVENT_OUT_EN, 0x1) ||
+				pwrap_write(wrp, PWRAP_DEW_EVENT_SRC_EN, 0xffff)) {
+			dev_err(wrp->dev, "enable dewrap fail\n");
+			return -EFAULT;
+		}
+	} else {
+		/* PMIC_DEWRAP enables */
+		if (pwrap_write(wrp, PWRAP_DEW_EVENT_OUT_EN, 0x1) ||
+				pwrap_write(wrp, PWRAP_DEW_EVENT_SRC_EN, 0xffff)) {
+			dev_err(wrp->dev, "enable dewrap fail\n");
+			return -EFAULT;
+		}
+	}
+
+	/* Setup the init done registers */
+	pwrap_writel(wrp, 1, PWRAP_INIT_DONE2);
+	pwrap_writel(wrp, 1, PWRAP_INIT_DONE0);
+	pwrap_writel(wrp, 1, PWRAP_INIT_DONE1);
+
+	if (pwrap_is_mt8135(wrp)) {
+		writel(1, wrp->bridge_base + PWRAP_MT8135_BRIDGE_INIT_DONE3);
+		writel(1, wrp->bridge_base + PWRAP_MT8135_BRIDGE_INIT_DONE4);
+	}
+
+	return 0;
+}
+
+static irqreturn_t pwrap_interrupt(int irqno, void *dev_id)
+{
+	u32 rdata;
+	struct pmic_wrapper *wrp = dev_id;
+
+	rdata = pwrap_readl(wrp, PWRAP_INT_FLG);
+
+	dev_err(wrp->dev, "unexpected interrupt int=0x%x\n", rdata);
+
+	pwrap_writel(wrp, 0xffffffff, PWRAP_INT_CLR);
+
+	return IRQ_HANDLED;
+}
+
+static const struct regmap_config pwrap_regmap_config = {
+	.reg_bits = 16,
+	.val_bits = 16,
+	.reg_stride = 2,
+	.reg_read = pwrap_regmap_read,
+	.reg_write = pwrap_regmap_write,
+	.max_register = 0xffff,
+};
+
+static struct of_device_id of_pwrap_match_tbl[] = {
+	{
+		.compatible = "mediatek,mt8135-pwrap",
+		.data = &pwrap_mt8135,
+	}, {
+		.compatible = "mediatek,mt8173-pwrap",
+		.data = &pwrap_mt8173,
+	}, {
+		/* sentinel */
+	}
+};
+MODULE_DEVICE_TABLE(of, of_pwrap_match_tbl);
+
+static int pwrap_probe(struct platform_device *pdev)
+{
+	int ret, irq;
+	struct pmic_wrapper *wrp;
+	struct device_node *np = pdev->dev.of_node;
+	const struct of_device_id *of_id =
+		of_match_device(of_pwrap_match_tbl, &pdev->dev);
+	const struct pmic_wrapper_type *type;
+	struct resource *res;
+
+	wrp = devm_kzalloc(&pdev->dev, sizeof(*wrp), GFP_KERNEL);
+	if (!wrp)
+		return -ENOMEM;
+
+	platform_set_drvdata(pdev, wrp);
+
+	type = of_id->data;
+	wrp->regs = type->regs;
+	wrp->type = type->type;
+	wrp->arb_en_all = type->arb_en_all;
+	wrp->dev = &pdev->dev;
+
+	res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "pwrap");
+	wrp->base = devm_ioremap_resource(wrp->dev, res);
+	if (IS_ERR(wrp->base))
+		return PTR_ERR(wrp->base);
+
+	wrp->rstc = devm_reset_control_get(wrp->dev, "pwrap");
+	if (IS_ERR(wrp->rstc)) {
+		ret = PTR_ERR(wrp->rstc);
+		dev_dbg(wrp->dev, "cannot get pwrap reset: %d\n", ret);
+		return ret;
+	}
+
+	if (pwrap_is_mt8135(wrp)) {
+		res = platform_get_resource_byname(pdev, IORESOURCE_MEM,
+				"pwrap-bridge");
+		wrp->bridge_base = devm_ioremap_resource(wrp->dev, res);
+		if (IS_ERR(wrp->bridge_base))
+			return PTR_ERR(wrp->bridge_base);
+
+		wrp->rstc_bridge = devm_reset_control_get(wrp->dev, "pwrap-bridge");
+		if (IS_ERR(wrp->rstc_bridge)) {
+			ret = PTR_ERR(wrp->rstc_bridge);
+			dev_dbg(wrp->dev, "cannot get pwrap-bridge reset: %d\n", ret);
+			return ret;
+		}
+	}
+
+	wrp->clk_spi = devm_clk_get(wrp->dev, "spi");
+	if (IS_ERR(wrp->clk_spi)) {
+		dev_dbg(wrp->dev, "failed to get clock: %ld\n", PTR_ERR(wrp->clk_spi));
+		return PTR_ERR(wrp->clk_spi);
+	}
+
+	wrp->clk_wrap = devm_clk_get(wrp->dev, "wrap");
+	if (IS_ERR(wrp->clk_wrap)) {
+		dev_dbg(wrp->dev, "failed to get clock: %ld\n", PTR_ERR(wrp->clk_wrap));
+		return PTR_ERR(wrp->clk_wrap);
+	}
+
+	ret = clk_prepare_enable(wrp->clk_spi);
+	if (ret)
+		return ret;
+
+	ret = clk_prepare_enable(wrp->clk_wrap);
+	if (ret)
+		goto err_out1;
+
+	/* Enable internal dynamic clock */
+	pwrap_writel(wrp, 1, PWRAP_DCM_EN);
+	pwrap_writel(wrp, 0, PWRAP_DCM_DBC_PRD);
+
+	/*
+	 * The PMIC could already be initialized by the bootloader.
+	 * Skip initialization here in this case.
+	 */
+	if (!pwrap_readl(wrp, PWRAP_INIT_DONE2)) {
+		ret = pwrap_init(wrp);
+		if (ret) {
+			dev_dbg(wrp->dev, "init failed with %d\n", ret);
+			goto err_out2;
+		}
+	}
+
+	if (!(pwrap_readl(wrp, PWRAP_WACS2_RDATA) & PWRAP_STATE_INIT_DONE0)) {
+		dev_dbg(wrp->dev, "initialization isn't finished\n");
+		return -ENODEV;
+	}
+
+	irq = platform_get_irq(pdev, 0);
+	ret = devm_request_irq(wrp->dev, irq, pwrap_interrupt, IRQF_TRIGGER_HIGH,
+			"mt-pmic-pwrap", wrp);
+	if (ret)
+		goto err_out2;
+
+	wrp->regmap = devm_regmap_init(wrp->dev, NULL, wrp, &pwrap_regmap_config);
+	if (IS_ERR(wrp->regmap))
+		return PTR_ERR(wrp->regmap);
+
+	ret = of_platform_populate(np, NULL, NULL, wrp->dev);
+	if (ret) {
+		dev_dbg(wrp->dev, "failed to create child devices at %s\n",
+				np->full_name);
+		goto err_out2;
+	}
+
+	return 0;
+
+err_out2:
+	clk_disable_unprepare(wrp->clk_wrap);
+err_out1:
+	clk_disable_unprepare(wrp->clk_spi);
+
+	return ret;
+}
+
+static struct platform_driver pwrap_drv = {
+	.driver = {
+		.name = "mt-pmic-pwrap",
+		.owner = THIS_MODULE,
+		.of_match_table = of_match_ptr(of_pwrap_match_tbl),
+	},
+	.probe = pwrap_probe,
+};
+
+module_platform_driver(pwrap_drv);
+
+MODULE_AUTHOR("Flora Fu, MediaTek");
+MODULE_DESCRIPTION("MediaTek MT8135 PMIC Wrapper Driver");
+MODULE_LICENSE("GPL v2");

drivers/soc/qcom/Kconfig

@@ -4,6 +4,7 @@
 config QCOM_GSBI
         tristate "QCOM General Serial Bus Interface"
         depends on ARCH_QCOM
+        select MFD_SYSCON
         help
           Say y here to enable GSBI support.  The GSBI provides control
           functions for connecting the underlying serial UART, SPI, and I2C

drivers/soc/qcom/qcom_gsbi.c

@@ -18,22 +18,129 @@
 #include <linux/of.h>
 #include <linux/of_platform.h>
 #include <linux/platform_device.h>
+#include <linux/regmap.h>
+#include <linux/mfd/syscon.h>
+#include <dt-bindings/soc/qcom,gsbi.h>
 
 #define GSBI_CTRL_REG		0x0000
 #define GSBI_PROTOCOL_SHIFT	4
+#define MAX_GSBI		12
+
+#define TCSR_ADM_CRCI_BASE	0x70
+
+struct crci_config {
+	u32 num_rows;
+	const u32 (*array)[MAX_GSBI];
+};
+
+static const u32 crci_ipq8064[][MAX_GSBI] = {
+	{
+		0x000003, 0x00000c, 0x000030, 0x0000c0,
+		0x000300, 0x000c00, 0x003000, 0x00c000,
+		0x030000, 0x0c0000, 0x300000, 0xc00000
+	},
+	{
+		0x000003, 0x00000c, 0x000030, 0x0000c0,
+		0x000300, 0x000c00, 0x003000, 0x00c000,
+		0x030000, 0x0c0000, 0x300000, 0xc00000
+	},
+};
+
+static const struct crci_config config_ipq8064 = {
+	.num_rows = ARRAY_SIZE(crci_ipq8064),
+	.array = crci_ipq8064,
+};
+
+static const unsigned int crci_apq8064[][MAX_GSBI] = {
+	{
+		0x001800, 0x006000, 0x000030, 0x0000c0,
+		0x000300, 0x000400, 0x000000, 0x000000,
+		0x000000, 0x000000, 0x000000, 0x000000
+	},
+	{
+		0x000000, 0x000000, 0x000000, 0x000000,
+		0x000000, 0x000020, 0x0000c0, 0x000000,
+		0x000000, 0x000000, 0x000000, 0x000000
+	},
+};
+
+static const struct crci_config config_apq8064 = {
+	.num_rows = ARRAY_SIZE(crci_apq8064),
+	.array = crci_apq8064,
+};
+
+static const unsigned int crci_msm8960[][MAX_GSBI] = {
+	{
+		0x000003, 0x00000c, 0x000030, 0x0000c0,
+		0x000300, 0x000400, 0x000000, 0x000000,
+		0x000000, 0x000000, 0x000000, 0x000000
+	},
+	{
+		0x000000, 0x000000, 0x000000, 0x000000,
+		0x000000, 0x000020, 0x0000c0, 0x000300,
+		0x001800, 0x006000, 0x000000, 0x000000
+	},
+};
+
+static const struct crci_config config_msm8960 = {
+	.num_rows = ARRAY_SIZE(crci_msm8960),
+	.array = crci_msm8960,
+};
+
+static const unsigned int crci_msm8660[][MAX_GSBI] = {
+	{	/* ADM 0 - B */
+		0x000003, 0x00000c, 0x000030, 0x0000c0,
+		0x000300, 0x000c00, 0x003000, 0x00c000,
+		0x030000, 0x0c0000, 0x300000, 0xc00000
+	},
+	{	/* ADM 0 - B */
+		0x000003, 0x00000c, 0x000030, 0x0000c0,
+		0x000300, 0x000c00, 0x003000, 0x00c000,
+		0x030000, 0x0c0000, 0x300000, 0xc00000
+	},
+	{	/* ADM 1 - A */
+		0x000003, 0x00000c, 0x000030, 0x0000c0,
+		0x000300, 0x000c00, 0x003000, 0x00c000,
+		0x030000, 0x0c0000, 0x300000, 0xc00000
+	},
+	{	/* ADM 1 - B */
+		0x000003, 0x00000c, 0x000030, 0x0000c0,
+		0x000300, 0x000c00, 0x003000, 0x00c000,
+		0x030000, 0x0c0000, 0x300000, 0xc00000
+	},
+};
+
+static const struct crci_config config_msm8660 = {
+	.num_rows = ARRAY_SIZE(crci_msm8660),
+	.array = crci_msm8660,
+};
 
 struct gsbi_info {
 	struct clk *hclk;
 	u32 mode;
 	u32 crci;
+	struct regmap *tcsr;
+};
+
+static const struct of_device_id tcsr_dt_match[] = {
+	{ .compatible = "qcom,tcsr-ipq8064", .data = &config_ipq8064},
+	{ .compatible = "qcom,tcsr-apq8064", .data = &config_apq8064},
+	{ .compatible = "qcom,tcsr-msm8960", .data = &config_msm8960},
+	{ .compatible = "qcom,tcsr-msm8660", .data = &config_msm8660},
+	{ },
 };
 
 static int gsbi_probe(struct platform_device *pdev)
 {
 	struct device_node *node = pdev->dev.of_node;
+	struct device_node *tcsr_node;
+	const struct of_device_id *match;
 	struct resource *res;
 	void __iomem *base;
 	struct gsbi_info *gsbi;
+	int i;
+	u32 mask, gsbi_num;
+	const struct crci_config *config = NULL;
 
 	gsbi = devm_kzalloc(&pdev->dev, sizeof(*gsbi), GFP_KERNEL);
 
@@ -45,6 +152,32 @@ static int gsbi_probe(struct platform_device *pdev)
 	if (IS_ERR(base))
 		return PTR_ERR(base);
 
+	/* get the tcsr node and setup the config and regmap */
+	gsbi->tcsr = syscon_regmap_lookup_by_phandle(node, "syscon-tcsr");
+
+	if (!IS_ERR(gsbi->tcsr)) {
+		tcsr_node = of_parse_phandle(node, "syscon-tcsr", 0);
+		if (tcsr_node) {
+			match = of_match_node(tcsr_dt_match, tcsr_node);
+			if (match)
+				config = match->data;
+			else
+				dev_warn(&pdev->dev, "no matching TCSR\n");
+
+			of_node_put(tcsr_node);
+		}
+	}
+
+	if (of_property_read_u32(node, "cell-index", &gsbi_num)) {
+		dev_err(&pdev->dev, "missing cell-index\n");
+		return -EINVAL;
+	}
+
+	if (gsbi_num < 1 || gsbi_num > MAX_GSBI) {
+		dev_err(&pdev->dev, "invalid cell-index\n");
+		return -EINVAL;
+	}
+
 	if (of_property_read_u32(node, "qcom,mode", &gsbi->mode)) {
 		dev_err(&pdev->dev, "missing mode configuration\n");
 		return -EINVAL;
@@ -64,6 +197,25 @@ static int gsbi_probe(struct platform_device *pdev)
 	writel_relaxed((gsbi->mode << GSBI_PROTOCOL_SHIFT) | gsbi->crci,
 				base + GSBI_CTRL_REG);
 
+	/*
+	 * modify tcsr to reflect mode and ADM CRCI mux
+	 * Each gsbi contains a pair of bits, one for RX and one for TX
+	 * SPI mode requires both bits cleared, otherwise they are set
+	 */
+	if (config) {
+		for (i = 0; i < config->num_rows; i++) {
+			mask = config->array[i][gsbi_num - 1];
+
+			if (gsbi->mode == GSBI_PROT_SPI)
+				regmap_update_bits(gsbi->tcsr,
+					TCSR_ADM_CRCI_BASE + 4 * i, mask, 0);
+			else
+				regmap_update_bits(gsbi->tcsr,
+					TCSR_ADM_CRCI_BASE + 4 * i, mask, mask);
+
+		}
+	}
+
 	/* make sure the gsbi control write is not reordered */
 	wmb();
 

drivers/watchdog/Kconfig

@@ -154,7 +154,7 @@ config ARM_SP805_WATCHDOG
 
 config AT91RM9200_WATCHDOG
 	tristate "AT91RM9200 watchdog"
-	depends on SOC_AT91RM9200
+	depends on SOC_AT91RM9200 && MFD_SYSCON
 	help
 	  Watchdog timer embedded into AT91RM9200 chips. This will reboot your
 	  system when the timeout is reached.

drivers/watchdog/at91rm9200_wdt.c

@@ -12,27 +12,32 @@
 #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
 
 #include <linux/bitops.h>
+#include <linux/delay.h>
 #include <linux/errno.h>
 #include <linux/fs.h>
 #include <linux/init.h>
 #include <linux/io.h>
 #include <linux/kernel.h>
+#include <linux/mfd/syscon.h>
+#include <linux/mfd/syscon/atmel-st.h>
 #include <linux/miscdevice.h>
 #include <linux/module.h>
 #include <linux/moduleparam.h>
 #include <linux/platform_device.h>
+#include <linux/reboot.h>
+#include <linux/regmap.h>
 #include <linux/types.h>
 #include <linux/watchdog.h>
 #include <linux/uaccess.h>
 #include <linux/of.h>
 #include <linux/of_device.h>
-#include <mach/at91_st.h>
 
 #define WDT_DEFAULT_TIME	5	/* seconds */
 #define WDT_MAX_TIME		256	/* seconds */
 
 static int wdt_time = WDT_DEFAULT_TIME;
 static bool nowayout = WATCHDOG_NOWAYOUT;
+static struct regmap *regmap_st;
 
 module_param(wdt_time, int, 0);
 MODULE_PARM_DESC(wdt_time, "Watchdog time in seconds. (default="
@@ -50,12 +55,33 @@ static unsigned long at91wdt_busy;
 
 /* ......................................................................... */
 
+static int at91rm9200_restart(struct notifier_block *this,
+					unsigned long mode, void *cmd)
+{
+	/*
+	 * Perform a hardware reset with the use of the Watchdog timer.
+	 */
+	regmap_write(regmap_st, AT91_ST_WDMR,
+		     AT91_ST_RSTEN | AT91_ST_EXTEN | 1);
+	regmap_write(regmap_st, AT91_ST_CR, AT91_ST_WDRST);
+
+	mdelay(2000);
+
+	pr_emerg("Unable to restart system\n");
+	return NOTIFY_DONE;
+}
+
+static struct notifier_block at91rm9200_restart_nb = {
+	.notifier_call = at91rm9200_restart,
+	.priority = 192,
+};
+
 /*
  * Disable the watchdog.
  */
 static inline void at91_wdt_stop(void)
 {
-	at91_st_write(AT91_ST_WDMR, AT91_ST_EXTEN);
+	regmap_write(regmap_st, AT91_ST_WDMR, AT91_ST_EXTEN);
 }
 
 /*
@@ -63,9 +89,9 @@ static inline void at91_wdt_stop(void)
  */
 static inline void at91_wdt_start(void)
 {
-	at91_st_write(AT91_ST_WDMR, AT91_ST_EXTEN | AT91_ST_RSTEN |
+	regmap_write(regmap_st, AT91_ST_WDMR, AT91_ST_EXTEN | AT91_ST_RSTEN |
 				(((65536 * wdt_time) >> 8) & AT91_ST_WDV));
-	at91_st_write(AT91_ST_CR, AT91_ST_WDRST);
+	regmap_write(regmap_st, AT91_ST_CR, AT91_ST_WDRST);
 }
 
 /*
@@ -73,7 +99,7 @@ static inline void at91_wdt_start(void)
  */
 static inline void at91_wdt_reload(void)
 {
-	at91_st_write(AT91_ST_CR, AT91_ST_WDRST);
+	regmap_write(regmap_st, AT91_ST_CR, AT91_ST_WDRST);
 }
 
 /* ......................................................................... */
@@ -203,16 +229,32 @@ static struct miscdevice at91wdt_miscdev = {
 
 static int at91wdt_probe(struct platform_device *pdev)
 {
+	struct device *dev = &pdev->dev;
+	struct device *parent;
 	int res;
 
 	if (at91wdt_miscdev.parent)
 		return -EBUSY;
 	at91wdt_miscdev.parent = &pdev->dev;
 
+	parent = dev->parent;
+	if (!parent) {
+		dev_err(dev, "no parent\n");
+		return -ENODEV;
+	}
+
+	regmap_st = syscon_node_to_regmap(parent->of_node);
+	if (!regmap_st)
+		return -ENODEV;
+
 	res = misc_register(&at91wdt_miscdev);
 	if (res)
 		return res;
 
+	res = register_restart_handler(&at91rm9200_restart_nb);
+	if (res)
+		dev_warn(dev, "failed to register restart handler\n");
+
 	pr_info("AT91 Watchdog Timer enabled (%d seconds%s)\n",
 		wdt_time, nowayout ? ", nowayout" : "");
 	return 0;
@@ -220,8 +262,13 @@ static int at91wdt_probe(struct platform_device *pdev)
 
 static int at91wdt_remove(struct platform_device *pdev)
 {
+	struct device *dev = &pdev->dev;
 	int res;
 
+	res = unregister_restart_handler(&at91rm9200_restart_nb);
+	if (res)
+		dev_warn(dev, "failed to unregister restart handler\n");
+
 	res = misc_deregister(&at91wdt_miscdev);
 	if (!res)
 		at91wdt_miscdev.parent = NULL;
@@ -267,7 +314,7 @@ static struct platform_driver at91wdt_driver = {
 	.suspend	= at91wdt_suspend,
 	.resume		= at91wdt_resume,
 	.driver		= {
-		.name	= "at91_wdt",
+		.name	= "atmel_st_watchdog",
 		.of_match_table = at91_wdt_dt_ids,
 	},
 };
@@ -296,4 +343,4 @@ module_exit(at91_wdt_exit);
 MODULE_AUTHOR("Andrew Victor");
 MODULE_DESCRIPTION("Watchdog driver for Atmel AT91RM9200");
 MODULE_LICENSE("GPL");
-MODULE_ALIAS("platform:at91_wdt");
+MODULE_ALIAS("platform:atmel_st_watchdog");

include/linux/arm-cci.h

@@ -24,16 +24,22 @@
 #include <linux/errno.h>
 #include <linux/types.h>
 
+#include <asm/arm-cci.h>
+
 struct device_node;
 
 #ifdef CONFIG_ARM_CCI
 extern bool cci_probed(void);
+#else
+static inline bool cci_probed(void) { return false; }
+#endif
+
+#ifdef CONFIG_ARM_CCI400_PORT_CTRL
 extern int cci_ace_get_port(struct device_node *dn);
 extern int cci_disable_port_by_cpu(u64 mpidr);
 extern int __cci_control_port_by_device(struct device_node *dn, bool enable);
 extern int __cci_control_port_by_index(u32 port, bool enable);
 #else
-static inline bool cci_probed(void) { return false; }
 static inline int cci_ace_get_port(struct device_node *dn)
 {
 	return -ENODEV;
@@ -49,6 +55,7 @@ static inline int __cci_control_port_by_index(u32 port, bool enable)
 	return -ENODEV;
 }
 #endif
+
 #define cci_disable_port_by_device(dev) \
 	__cci_control_port_by_device(dev, false)
 #define cci_enable_port_by_device(dev) \

include/linux/mfd/syscon/atmel-st.h

@@ -0,0 +1,49 @@
+/*
+ * Copyright (C) 2005 Ivan Kokshaysky
+ * Copyright (C) SAN People
+ *
+ * System Timer (ST) - System peripherals registers.
+ * Based on AT91RM9200 datasheet revision E.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#ifndef _LINUX_MFD_SYSCON_ATMEL_ST_H
+#define _LINUX_MFD_SYSCON_ATMEL_ST_H
+
+#include <linux/bitops.h>
+
+#define AT91_ST_CR	0x00	/* Control Register */
+#define		AT91_ST_WDRST	BIT(0)	/* Watchdog Timer Restart */
+
+#define AT91_ST_PIMR	0x04	/* Period Interval Mode Register */
+#define		AT91_ST_PIV	0xffff	/* Period Interval Value */
+
+#define AT91_ST_WDMR	0x08	/* Watchdog Mode Register */
+#define		AT91_ST_WDV	0xffff	/* Watchdog Counter Value */
+#define		AT91_ST_RSTEN	BIT(16)	/* Reset Enable */
+#define		AT91_ST_EXTEN	BIT(17)	/* External Signal Assertion Enable */
+
+#define AT91_ST_RTMR	0x0c	/* Real-time Mode Register */
+#define		AT91_ST_RTPRES	0xffff	/* Real-time Prescalar Value */
+
+#define AT91_ST_SR	0x10	/* Status Register */
+#define		AT91_ST_PITS	BIT(0)	/* Period Interval Timer Status */
+#define		AT91_ST_WDOVF	BIT(1)	/* Watchdog Overflow */
+#define		AT91_ST_RTTINC	BIT(2)	/* Real-time Timer Increment */
+#define		AT91_ST_ALMS	BIT(3)	/* Alarm Status */
+
+#define AT91_ST_IER	0x14	/* Interrupt Enable Register */
+#define AT91_ST_IDR	0x18	/* Interrupt Disable Register */
+#define AT91_ST_IMR	0x1c	/* Interrupt Mask Register */
+
+#define AT91_ST_RTAR	0x20	/* Real-time Alarm Register */
+#define		AT91_ST_ALMV	0xfffff	/* Alarm Value */
+
+#define AT91_ST_CRTR	0x24	/* Current Real-time Register */
+#define		AT91_ST_CRTV	0xfffff	/* Current Real-Time Value */
+
+#endif /* _LINUX_MFD_SYSCON_ATMEL_ST_H */

include/linux/omap-gpmc.h

@@ -163,7 +163,8 @@ extern unsigned int gpmc_ticks_to_ns(unsigned int ticks);
 
 extern void gpmc_cs_write_reg(int cs, int idx, u32 val);
 extern int gpmc_calc_divider(unsigned int sync_clk);
-extern int gpmc_cs_set_timings(int cs, const struct gpmc_timings *t);
+extern int gpmc_cs_set_timings(int cs, const struct gpmc_timings *t,
+			       const struct gpmc_settings *s);
 extern int gpmc_cs_program_settings(int cs, struct gpmc_settings *p);
 extern int gpmc_cs_request(int cs, unsigned long size, unsigned long *base);
 extern void gpmc_cs_free(int cs);

include/linux/qcom_scm.h

@@ -0,0 +1,28 @@
+/* Copyright (c) 2010-2014, The Linux Foundation. All rights reserved.
+ * Copyright (C) 2015 Linaro Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+#ifndef __QCOM_SCM_H
+#define __QCOM_SCM_H
+
+extern int qcom_scm_set_cold_boot_addr(void *entry, const cpumask_t *cpus);
+extern int qcom_scm_set_warm_boot_addr(void *entry, const cpumask_t *cpus);
+
+#define QCOM_SCM_CPU_PWR_DOWN_L2_ON	0x0
+#define QCOM_SCM_CPU_PWR_DOWN_L2_OFF	0x1
+
+extern void qcom_scm_cpu_power_down(u32 flags);
+
+#define QCOM_SCM_VERSION(major, minor) (((major) << 16) | ((minor) & 0xFF))
+
+extern u32 qcom_scm_get_version(void);
+
+#endif