|
@@ -0,0 +1,46 @@
|
|
|
+* Aptina MT9V111 CMOS sensor
|
|
|
+----------------------------
|
|
|
+
|
|
|
+The Aptina MT9V111 is a 1/4-Inch VGA-format digital image sensor with a core
|
|
|
+based on Aptina MT9V011 sensor and an integrated Image Flow Processor (IFP).
|
|
|
+
|
|
|
+The sensor has an active pixel array of 640x480 pixels and can output a number
|
|
|
+of image resolution and formats controllable through a simple two-wires
|
|
|
+interface.
|
|
|
+
|
|
|
+Required properties:
|
|
|
+--------------------
|
|
|
+
|
|
|
+- compatible: shall be "aptina,mt9v111".
|
|
|
+- clocks: reference to the system clock input provider.
|
|
|
+
|
|
|
+Optional properties:
|
|
|
+--------------------
|
|
|
+
|
|
|
+- enable-gpios: output enable signal, pin name "OE#". Active low.
|
|
|
+- standby-gpios: low power state control signal, pin name "STANDBY".
|
|
|
+ Active high.
|
|
|
+- reset-gpios: chip reset signal, pin name "RESET#". Active low.
|
|
|
+
|
|
|
+The device node must contain one 'port' child node with one 'endpoint' child
|
|
|
+sub-node for its digital output video port, in accordance with the video
|
|
|
+interface bindings defined in:
|
|
|
+Documentation/devicetree/bindings/media/video-interfaces.txt
|
|
|
+
|
|
|
+Example:
|
|
|
+--------
|
|
|
+
|
|
|
+ &i2c1 {
|
|
|
+ camera@48 {
|
|
|
+ compatible = "aptina,mt9v111";
|
|
|
+ reg = <0x48>;
|
|
|
+
|
|
|
+ clocks = <&camera_clk>;
|
|
|
+
|
|
|
+ port {
|
|
|
+ mt9v111_out: endpoint {
|
|
|
+ remote-endpoint = <&ceu_in>;
|
|
|
+ };
|
|
|
+ };
|
|
|
+ };
|
|
|
+ };
|