|
|
@@ -1,318 +0,0 @@
|
|
|
-/*
|
|
|
- * Copyright (C) 2010 Eric Benard - eric@eukrea.com
|
|
|
- *
|
|
|
- * Based on pcm970-baseboard.c which is :
|
|
|
- * Copyright (C) 2008 Juergen Beisert (kernel@pengutronix.de)
|
|
|
- *
|
|
|
- * This program is free software; you can redistribute it and/or
|
|
|
- * modify it under the terms of the GNU General Public License
|
|
|
- * as published by the Free Software Foundation; either version 2
|
|
|
- * of the License, or (at your option) any later version.
|
|
|
- * This program is distributed in the hope that it will be useful,
|
|
|
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
|
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
|
- * GNU General Public License for more details.
|
|
|
- *
|
|
|
- * You should have received a copy of the GNU General Public License
|
|
|
- * along with this program; if not, write to the Free Software
|
|
|
- * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
|
|
|
- * MA 02110-1301, USA.
|
|
|
- */
|
|
|
-
|
|
|
-#include <linux/types.h>
|
|
|
-#include <linux/init.h>
|
|
|
-
|
|
|
-#include <linux/gpio.h>
|
|
|
-#include <linux/interrupt.h>
|
|
|
-#include <linux/leds.h>
|
|
|
-#include <linux/platform_device.h>
|
|
|
-#include <linux/input.h>
|
|
|
-#include <linux/spi/spi.h>
|
|
|
-#include <video/platform_lcd.h>
|
|
|
-#include <linux/i2c.h>
|
|
|
-
|
|
|
-#include <asm/mach-types.h>
|
|
|
-#include <asm/mach/arch.h>
|
|
|
-#include <asm/mach/time.h>
|
|
|
-#include <asm/mach/map.h>
|
|
|
-
|
|
|
-#include "common.h"
|
|
|
-#include "devices-imx35.h"
|
|
|
-#include "hardware.h"
|
|
|
-#include "iomux-mx35.h"
|
|
|
-
|
|
|
-static const struct fb_videomode fb_modedb[] = {
|
|
|
- {
|
|
|
- .name = "CMO-QVGA",
|
|
|
- .refresh = 60,
|
|
|
- .xres = 320,
|
|
|
- .yres = 240,
|
|
|
- .pixclock = KHZ2PICOS(6500),
|
|
|
- .left_margin = 68,
|
|
|
- .right_margin = 20,
|
|
|
- .upper_margin = 15,
|
|
|
- .lower_margin = 4,
|
|
|
- .hsync_len = 30,
|
|
|
- .vsync_len = 3,
|
|
|
- .sync = 0,
|
|
|
- .vmode = FB_VMODE_NONINTERLACED,
|
|
|
- .flag = 0,
|
|
|
- },
|
|
|
- {
|
|
|
- .name = "DVI-VGA",
|
|
|
- .refresh = 60,
|
|
|
- .xres = 640,
|
|
|
- .yres = 480,
|
|
|
- .pixclock = 32000,
|
|
|
- .left_margin = 100,
|
|
|
- .right_margin = 100,
|
|
|
- .upper_margin = 7,
|
|
|
- .lower_margin = 100,
|
|
|
- .hsync_len = 7,
|
|
|
- .vsync_len = 7,
|
|
|
- .sync = FB_SYNC_VERT_HIGH_ACT | FB_SYNC_HOR_HIGH_ACT |
|
|
|
- FB_SYNC_OE_ACT_HIGH | FB_SYNC_CLK_INVERT,
|
|
|
- .vmode = FB_VMODE_NONINTERLACED,
|
|
|
- .flag = 0,
|
|
|
- },
|
|
|
- {
|
|
|
- .name = "DVI-SVGA",
|
|
|
- .refresh = 60,
|
|
|
- .xres = 800,
|
|
|
- .yres = 600,
|
|
|
- .pixclock = 25000,
|
|
|
- .left_margin = 75,
|
|
|
- .right_margin = 75,
|
|
|
- .upper_margin = 7,
|
|
|
- .lower_margin = 75,
|
|
|
- .hsync_len = 7,
|
|
|
- .vsync_len = 7,
|
|
|
- .sync = FB_SYNC_VERT_HIGH_ACT | FB_SYNC_HOR_HIGH_ACT |
|
|
|
- FB_SYNC_OE_ACT_HIGH | FB_SYNC_CLK_INVERT,
|
|
|
- .vmode = FB_VMODE_NONINTERLACED,
|
|
|
- .flag = 0,
|
|
|
- },
|
|
|
-};
|
|
|
-
|
|
|
-static struct mx3fb_platform_data mx3fb_pdata __initdata = {
|
|
|
- .name = "CMO-QVGA",
|
|
|
- .mode = fb_modedb,
|
|
|
- .num_modes = ARRAY_SIZE(fb_modedb),
|
|
|
-};
|
|
|
-
|
|
|
-static const iomux_v3_cfg_t eukrea_mbimxsd_pads[] __initconst = {
|
|
|
- /* LCD */
|
|
|
- MX35_PAD_LD0__IPU_DISPB_DAT_0,
|
|
|
- MX35_PAD_LD1__IPU_DISPB_DAT_1,
|
|
|
- MX35_PAD_LD2__IPU_DISPB_DAT_2,
|
|
|
- MX35_PAD_LD3__IPU_DISPB_DAT_3,
|
|
|
- MX35_PAD_LD4__IPU_DISPB_DAT_4,
|
|
|
- MX35_PAD_LD5__IPU_DISPB_DAT_5,
|
|
|
- MX35_PAD_LD6__IPU_DISPB_DAT_6,
|
|
|
- MX35_PAD_LD7__IPU_DISPB_DAT_7,
|
|
|
- MX35_PAD_LD8__IPU_DISPB_DAT_8,
|
|
|
- MX35_PAD_LD9__IPU_DISPB_DAT_9,
|
|
|
- MX35_PAD_LD10__IPU_DISPB_DAT_10,
|
|
|
- MX35_PAD_LD11__IPU_DISPB_DAT_11,
|
|
|
- MX35_PAD_LD12__IPU_DISPB_DAT_12,
|
|
|
- MX35_PAD_LD13__IPU_DISPB_DAT_13,
|
|
|
- MX35_PAD_LD14__IPU_DISPB_DAT_14,
|
|
|
- MX35_PAD_LD15__IPU_DISPB_DAT_15,
|
|
|
- MX35_PAD_LD16__IPU_DISPB_DAT_16,
|
|
|
- MX35_PAD_LD17__IPU_DISPB_DAT_17,
|
|
|
- MX35_PAD_D3_HSYNC__IPU_DISPB_D3_HSYNC,
|
|
|
- MX35_PAD_D3_FPSHIFT__IPU_DISPB_D3_CLK,
|
|
|
- MX35_PAD_D3_DRDY__IPU_DISPB_D3_DRDY,
|
|
|
- MX35_PAD_D3_VSYNC__IPU_DISPB_D3_VSYNC,
|
|
|
- /* Backlight */
|
|
|
- MX35_PAD_CONTRAST__IPU_DISPB_CONTR,
|
|
|
- /* LCD_PWR */
|
|
|
- MX35_PAD_D3_CLS__GPIO1_4,
|
|
|
- /* LED */
|
|
|
- MX35_PAD_LD23__GPIO3_29,
|
|
|
- /* SWITCH */
|
|
|
- MX35_PAD_LD19__GPIO3_25,
|
|
|
- /* UART2 */
|
|
|
- MX35_PAD_CTS2__UART2_CTS,
|
|
|
- MX35_PAD_RTS2__UART2_RTS,
|
|
|
- MX35_PAD_TXD2__UART2_TXD_MUX,
|
|
|
- MX35_PAD_RXD2__UART2_RXD_MUX,
|
|
|
- /* I2S */
|
|
|
- MX35_PAD_STXFS4__AUDMUX_AUD4_TXFS,
|
|
|
- MX35_PAD_STXD4__AUDMUX_AUD4_TXD,
|
|
|
- MX35_PAD_SRXD4__AUDMUX_AUD4_RXD,
|
|
|
- MX35_PAD_SCK4__AUDMUX_AUD4_TXC,
|
|
|
- /* CAN2 */
|
|
|
- MX35_PAD_TX5_RX0__CAN2_TXCAN,
|
|
|
- MX35_PAD_TX4_RX1__CAN2_RXCAN,
|
|
|
- /* SDCARD */
|
|
|
- MX35_PAD_SD1_CMD__ESDHC1_CMD,
|
|
|
- MX35_PAD_SD1_CLK__ESDHC1_CLK,
|
|
|
- MX35_PAD_SD1_DATA0__ESDHC1_DAT0,
|
|
|
- MX35_PAD_SD1_DATA1__ESDHC1_DAT1,
|
|
|
- MX35_PAD_SD1_DATA2__ESDHC1_DAT2,
|
|
|
- MX35_PAD_SD1_DATA3__ESDHC1_DAT3,
|
|
|
- /* SD1 CD */
|
|
|
- MX35_PAD_LD18__GPIO3_24,
|
|
|
- /* SPI */
|
|
|
- MX35_PAD_CSPI1_MOSI__CSPI1_MOSI,
|
|
|
- MX35_PAD_CSPI1_MISO__CSPI1_MISO,
|
|
|
- MX35_PAD_CSPI1_SS0__GPIO1_18,
|
|
|
- MX35_PAD_CSPI1_SS1__GPIO1_19,
|
|
|
- MX35_PAD_CSPI1_SCLK__CSPI1_SCLK,
|
|
|
- MX35_PAD_CSPI1_SPI_RDY__GPIO3_5,
|
|
|
-};
|
|
|
-
|
|
|
-#define GPIO_LED1 IMX_GPIO_NR(3, 29)
|
|
|
-#define GPIO_SWITCH1 IMX_GPIO_NR(3, 25)
|
|
|
-#define GPIO_LCDPWR IMX_GPIO_NR(1, 4)
|
|
|
-#define GPIO_SD1CD IMX_GPIO_NR(3, 24)
|
|
|
-#define GPIO_SPI1_SS0 IMX_GPIO_NR(1, 18)
|
|
|
-#define GPIO_SPI1_SS1 IMX_GPIO_NR(1, 19)
|
|
|
-#define GPIO_SPI1_IRQ IMX_GPIO_NR(3, 5)
|
|
|
-
|
|
|
-static void eukrea_mbimxsd_lcd_power_set(struct plat_lcd_data *pd,
|
|
|
- unsigned int power)
|
|
|
-{
|
|
|
- if (power)
|
|
|
- gpio_direction_output(GPIO_LCDPWR, 1);
|
|
|
- else
|
|
|
- gpio_direction_output(GPIO_LCDPWR, 0);
|
|
|
-}
|
|
|
-
|
|
|
-static struct plat_lcd_data eukrea_mbimxsd_lcd_power_data = {
|
|
|
- .set_power = eukrea_mbimxsd_lcd_power_set,
|
|
|
-};
|
|
|
-
|
|
|
-static struct platform_device eukrea_mbimxsd_lcd_powerdev = {
|
|
|
- .name = "platform-lcd",
|
|
|
- .dev.platform_data = &eukrea_mbimxsd_lcd_power_data,
|
|
|
-};
|
|
|
-
|
|
|
-static struct gpio_led eukrea_mbimxsd_leds[] = {
|
|
|
- {
|
|
|
- .name = "led1",
|
|
|
- .default_trigger = "heartbeat",
|
|
|
- .active_low = 1,
|
|
|
- .gpio = GPIO_LED1,
|
|
|
- },
|
|
|
-};
|
|
|
-
|
|
|
-static const struct gpio_led_platform_data
|
|
|
- eukrea_mbimxsd_led_info __initconst = {
|
|
|
- .leds = eukrea_mbimxsd_leds,
|
|
|
- .num_leds = ARRAY_SIZE(eukrea_mbimxsd_leds),
|
|
|
-};
|
|
|
-
|
|
|
-static struct gpio_keys_button eukrea_mbimxsd_gpio_buttons[] = {
|
|
|
- {
|
|
|
- .gpio = GPIO_SWITCH1,
|
|
|
- .code = BTN_0,
|
|
|
- .desc = "BP1",
|
|
|
- .active_low = 1,
|
|
|
- .wakeup = 1,
|
|
|
- },
|
|
|
-};
|
|
|
-
|
|
|
-static const struct gpio_keys_platform_data
|
|
|
- eukrea_mbimxsd_button_data __initconst = {
|
|
|
- .buttons = eukrea_mbimxsd_gpio_buttons,
|
|
|
- .nbuttons = ARRAY_SIZE(eukrea_mbimxsd_gpio_buttons),
|
|
|
-};
|
|
|
-
|
|
|
-static struct platform_device *platform_devices[] __initdata = {
|
|
|
- &eukrea_mbimxsd_lcd_powerdev,
|
|
|
-};
|
|
|
-
|
|
|
-static const struct imxuart_platform_data uart_pdata __initconst = {
|
|
|
- .flags = IMXUART_HAVE_RTSCTS,
|
|
|
-};
|
|
|
-
|
|
|
-static struct i2c_board_info eukrea_mbimxsd_i2c_devices[] = {
|
|
|
- {
|
|
|
- I2C_BOARD_INFO("tlv320aic23", 0x1a),
|
|
|
- },
|
|
|
-};
|
|
|
-
|
|
|
-static const
|
|
|
-struct imx_ssi_platform_data eukrea_mbimxsd_ssi_pdata __initconst = {
|
|
|
- .flags = IMX_SSI_SYN | IMX_SSI_NET | IMX_SSI_USE_I2S_SLAVE,
|
|
|
-};
|
|
|
-
|
|
|
-static struct esdhc_platform_data sd1_pdata = {
|
|
|
- .cd_gpio = GPIO_SD1CD,
|
|
|
- .cd_type = ESDHC_CD_GPIO,
|
|
|
- .wp_type = ESDHC_WP_NONE,
|
|
|
-};
|
|
|
-
|
|
|
-static struct spi_board_info eukrea_mbimxsd35_spi_board_info[] __initdata = {
|
|
|
- {
|
|
|
- .modalias = "spidev",
|
|
|
- .max_speed_hz = 20000000,
|
|
|
- .bus_num = 0,
|
|
|
- .chip_select = 0,
|
|
|
- .mode = SPI_MODE_0,
|
|
|
- },
|
|
|
- {
|
|
|
- .modalias = "spidev",
|
|
|
- .max_speed_hz = 20000000,
|
|
|
- .bus_num = 0,
|
|
|
- .chip_select = 1,
|
|
|
- .mode = SPI_MODE_0,
|
|
|
- },
|
|
|
-};
|
|
|
-
|
|
|
-static int eukrea_mbimxsd35_spi_cs[] = {GPIO_SPI1_SS0, GPIO_SPI1_SS1};
|
|
|
-
|
|
|
-static const struct spi_imx_master eukrea_mbimxsd35_spi0_data __initconst = {
|
|
|
- .chipselect = eukrea_mbimxsd35_spi_cs,
|
|
|
- .num_chipselect = ARRAY_SIZE(eukrea_mbimxsd35_spi_cs),
|
|
|
-};
|
|
|
-
|
|
|
-/*
|
|
|
- * system init for baseboard usage. Will be called by cpuimx35 init.
|
|
|
- *
|
|
|
- * Add platform devices present on this baseboard and init
|
|
|
- * them from CPU side as far as required to use them later on
|
|
|
- */
|
|
|
-void __init eukrea_mbimxsd35_baseboard_init(void)
|
|
|
-{
|
|
|
- if (mxc_iomux_v3_setup_multiple_pads(eukrea_mbimxsd_pads,
|
|
|
- ARRAY_SIZE(eukrea_mbimxsd_pads)))
|
|
|
- printk(KERN_ERR "error setting mbimxsd pads !\n");
|
|
|
-
|
|
|
- imx35_add_imx_uart1(&uart_pdata);
|
|
|
- imx35_add_ipu_core();
|
|
|
- imx35_add_mx3_sdc_fb(&mx3fb_pdata);
|
|
|
-
|
|
|
- imx35_add_imx_ssi(0, &eukrea_mbimxsd_ssi_pdata);
|
|
|
-
|
|
|
- imx35_add_flexcan1();
|
|
|
- imx35_add_sdhci_esdhc_imx(0, &sd1_pdata);
|
|
|
-
|
|
|
- gpio_request(GPIO_LED1, "LED1");
|
|
|
- gpio_direction_output(GPIO_LED1, 1);
|
|
|
- gpio_free(GPIO_LED1);
|
|
|
-
|
|
|
- gpio_request(GPIO_SWITCH1, "SWITCH1");
|
|
|
- gpio_direction_input(GPIO_SWITCH1);
|
|
|
- gpio_free(GPIO_SWITCH1);
|
|
|
-
|
|
|
- gpio_request(GPIO_LCDPWR, "LCDPWR");
|
|
|
- gpio_direction_output(GPIO_LCDPWR, 1);
|
|
|
-
|
|
|
- i2c_register_board_info(0, eukrea_mbimxsd_i2c_devices,
|
|
|
- ARRAY_SIZE(eukrea_mbimxsd_i2c_devices));
|
|
|
-
|
|
|
- gpio_request(GPIO_SPI1_IRQ, "SPI1_IRQ");
|
|
|
- gpio_direction_input(GPIO_SPI1_IRQ);
|
|
|
- gpio_free(GPIO_SPI1_IRQ);
|
|
|
- imx35_add_spi_imx0(&eukrea_mbimxsd35_spi0_data);
|
|
|
- spi_register_board_info(eukrea_mbimxsd35_spi_board_info,
|
|
|
- ARRAY_SIZE(eukrea_mbimxsd35_spi_board_info));
|
|
|
-
|
|
|
- platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices));
|
|
|
- gpio_led_register_device(-1, &eukrea_mbimxsd_led_info);
|
|
|
- imx_add_gpio_keys(&eukrea_mbimxsd_button_data);
|
|
|
- imx_add_platform_device("eukrea_tlv320", 0, NULL, 0, NULL, 0);
|
|
|
-}
|
Arnd Bergmann