Merge branch 'v4l_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6

* 'v4l_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6: (94 commits)
  V4L/DVB: tvp7002: fix write to H-PLL Feedback Divider LSB register
  V4L/DVB: dvb: siano: free spinlock before schedule()
  V4L/DVB: media: video: pvrusb2: remove custom hex_to_bin()
  V4L/DVB: drivers: usbvideo: remove custom implementation of hex_to_bin()
  V4L/DVB: Report supported QAM modes on bt8xx
  V4L/DVB: media: ir-keytable: null dereference in debug code
  V4L/DVB: ivtv: convert to the new control framework
  V4L/DVB: ivtv: convert gpio subdev to new control framework
  V4L/DVB: wm8739: convert to the new control framework
  V4L/DVB: cs53l32a: convert to new control framework
  V4L/DVB: wm8775: convert to the new control framework
  V4L/DVB: cx2341x: convert to the control framework
  V4L/DVB: cx25840: convert to the new control framework
  V4L/DVB: cx25840/ivtv: replace ugly priv control with s_config
  V4L/DVB: saa717x: convert to the new control framework
  V4L/DVB: msp3400: convert to the new control framework
  V4L/DVB: saa7115: convert to the new control framework
  V4L/DVB: v4l2: hook up the new control framework into the core framework
  V4L/DVB: Documentation: add v4l2-controls.txt documenting the new controls API
  V4L/DVB: v4l2-ctrls: Whitespace cleanups
  ...

Documentation/DocBook/v4l/lirc_device_interface.xml

@@ -229,6 +229,22 @@ on working with the default settings initially.</para>
       and LIRC_SETUP_END. Drivers can also choose to ignore these ioctls.</para>
     </listitem>
   </varlistentry>
+  <varlistentry>
+    <term>LIRC_SET_WIDEBAND_RECEIVER</term>
+    <listitem>
+      <para>Some receivers are equipped with special wide band receiver which is intended
+      to be used to learn output of existing remote.
+      Calling that ioctl with (1) will enable it, and with (0) disable it.
+      This might be useful of receivers that have otherwise narrow band receiver
+      that prevents them to be used with some remotes.
+      Wide band receiver might also be more precise
+      On the other hand its disadvantage it usually reduced range of reception.
+      Note: wide band receiver might be implictly enabled if you enable
+      carrier reports. In that case it will be disabled as soon as you disable
+      carrier reports. Trying to disable wide band receiver while carrier
+      reports are active will do nothing.</para>
+    </listitem>
+  </varlistentry>
 </variablelist>
 
 </section>

Documentation/DocBook/v4l/pixfmt-packed-rgb.xml

@@ -240,6 +240,45 @@ colorspace <constant>V4L2_COLORSPACE_SRGB</constant>.</para>
 	    <entry>r<subscript>1</subscript></entry>
 	    <entry>r<subscript>0</subscript></entry>
 	  </row>
+	  <row id="V4L2-PIX-FMT-BGR666">
+	    <entry><constant>V4L2_PIX_FMT_BGR666</constant></entry>
+	    <entry>'BGRH'</entry>
+	    <entry></entry>
+	    <entry>b<subscript>5</subscript></entry>
+	    <entry>b<subscript>4</subscript></entry>
+	    <entry>b<subscript>3</subscript></entry>
+	    <entry>b<subscript>2</subscript></entry>
+	    <entry>b<subscript>1</subscript></entry>
+	    <entry>b<subscript>0</subscript></entry>
+	    <entry>g<subscript>5</subscript></entry>
+	    <entry>g<subscript>4</subscript></entry>
+	    <entry></entry>
+	    <entry>g<subscript>3</subscript></entry>
+	    <entry>g<subscript>2</subscript></entry>
+	    <entry>g<subscript>1</subscript></entry>
+	    <entry>g<subscript>0</subscript></entry>
+	    <entry>r<subscript>5</subscript></entry>
+	    <entry>r<subscript>4</subscript></entry>
+	    <entry>r<subscript>3</subscript></entry>
+	    <entry>r<subscript>2</subscript></entry>
+	    <entry></entry>
+	    <entry>r<subscript>1</subscript></entry>
+	    <entry>r<subscript>0</subscript></entry>
+	    <entry></entry>
+	    <entry></entry>
+	    <entry></entry>
+	    <entry></entry>
+	    <entry></entry>
+	    <entry></entry>
+	    <entry></entry>
+	    <entry></entry>
+	    <entry></entry>
+	    <entry></entry>
+	    <entry></entry>
+	    <entry></entry>
+	    <entry></entry>
+	    <entry></entry>
+	  </row>
 	  <row id="V4L2-PIX-FMT-BGR24">
 	    <entry><constant>V4L2_PIX_FMT_BGR24</constant></entry>
 	    <entry>'BGR3'</entry>
@@ -700,6 +739,45 @@ defined in error. Drivers may interpret them as in <xref
 	    <entry>b<subscript>1</subscript></entry>
 	    <entry>b<subscript>0</subscript></entry>
 	  </row>
+	  <row id="V4L2-PIX-FMT-BGR666">
+	    <entry><constant>V4L2_PIX_FMT_BGR666</constant></entry>
+	    <entry>'BGRH'</entry>
+	    <entry></entry>
+	    <entry>b<subscript>5</subscript></entry>
+	    <entry>b<subscript>4</subscript></entry>
+	    <entry>b<subscript>3</subscript></entry>
+	    <entry>b<subscript>2</subscript></entry>
+	    <entry>b<subscript>1</subscript></entry>
+	    <entry>b<subscript>0</subscript></entry>
+	    <entry>g<subscript>5</subscript></entry>
+	    <entry>g<subscript>4</subscript></entry>
+	    <entry></entry>
+	    <entry>g<subscript>3</subscript></entry>
+	    <entry>g<subscript>2</subscript></entry>
+	    <entry>g<subscript>1</subscript></entry>
+	    <entry>g<subscript>0</subscript></entry>
+	    <entry>r<subscript>5</subscript></entry>
+	    <entry>r<subscript>4</subscript></entry>
+	    <entry>r<subscript>3</subscript></entry>
+	    <entry>r<subscript>2</subscript></entry>
+	    <entry></entry>
+	    <entry>r<subscript>1</subscript></entry>
+	    <entry>r<subscript>0</subscript></entry>
+	    <entry></entry>
+	    <entry></entry>
+	    <entry></entry>
+	    <entry></entry>
+	    <entry></entry>
+	    <entry></entry>
+	    <entry></entry>
+	    <entry></entry>
+	    <entry></entry>
+	    <entry></entry>
+	    <entry></entry>
+	    <entry></entry>
+	    <entry></entry>
+	    <entry></entry>
+	  </row>
 	  <row><!-- id="V4L2-PIX-FMT-BGR24" -->
 	    <entry><constant>V4L2_PIX_FMT_BGR24</constant></entry>
 	    <entry>'BGR3'</entry>

Documentation/video4linux/v4l2-controls.txt

@@ -0,0 +1,648 @@
+Introduction
+============
+
+The V4L2 control API seems simple enough, but quickly becomes very hard to
+implement correctly in drivers. But much of the code needed to handle controls
+is actually not driver specific and can be moved to the V4L core framework.
+
+After all, the only part that a driver developer is interested in is:
+
+1) How do I add a control?
+2) How do I set the control's value? (i.e. s_ctrl)
+
+And occasionally:
+
+3) How do I get the control's value? (i.e. g_volatile_ctrl)
+4) How do I validate the user's proposed control value? (i.e. try_ctrl)
+
+All the rest is something that can be done centrally.
+
+The control framework was created in order to implement all the rules of the
+V4L2 specification with respect to controls in a central place. And to make
+life as easy as possible for the driver developer.
+
+Note that the control framework relies on the presence of a struct v4l2_device
+for V4L2 drivers and struct v4l2_subdev for sub-device drivers.
+
+
+Objects in the framework
+========================
+
+There are two main objects:
+
+The v4l2_ctrl object describes the control properties and keeps track of the
+control's value (both the current value and the proposed new value).
+
+v4l2_ctrl_handler is the object that keeps track of controls. It maintains a
+list of v4l2_ctrl objects that it owns and another list of references to
+controls, possibly to controls owned by other handlers.
+
+
+Basic usage for V4L2 and sub-device drivers
+===========================================
+
+1) Prepare the driver:
+
+1.1) Add the handler to your driver's top-level struct:
+
+	struct foo_dev {
+		...
+		struct v4l2_ctrl_handler ctrl_handler;
+		...
+	};
+
+	struct foo_dev *foo;
+
+1.2) Initialize the handler:
+
+	v4l2_ctrl_handler_init(&foo->ctrl_handler, nr_of_controls);
+
+  The second argument is a hint telling the function how many controls this
+  handler is expected to handle. It will allocate a hashtable based on this
+  information. It is a hint only.
+
+1.3) Hook the control handler into the driver:
+
+1.3.1) For V4L2 drivers do this:
+
+	struct foo_dev {
+		...
+		struct v4l2_device v4l2_dev;
+		...
+		struct v4l2_ctrl_handler ctrl_handler;
+		...
+	};
+
+	foo->v4l2_dev.ctrl_handler = &foo->ctrl_handler;
+
+  Where foo->v4l2_dev is of type struct v4l2_device.
+
+  Finally, remove all control functions from your v4l2_ioctl_ops:
+  vidioc_queryctrl, vidioc_querymenu, vidioc_g_ctrl, vidioc_s_ctrl,
+  vidioc_g_ext_ctrls, vidioc_try_ext_ctrls and vidioc_s_ext_ctrls.
+  Those are now no longer needed.
+
+1.3.2) For sub-device drivers do this:
+
+	struct foo_dev {
+		...
+		struct v4l2_subdev sd;
+		...
+		struct v4l2_ctrl_handler ctrl_handler;
+		...
+	};
+
+	foo->sd.ctrl_handler = &foo->ctrl_handler;
+
+  Where foo->sd is of type struct v4l2_subdev.
+
+  And set all core control ops in your struct v4l2_subdev_core_ops to these
+  helpers:
+
+	.queryctrl = v4l2_subdev_queryctrl,
+	.querymenu = v4l2_subdev_querymenu,
+	.g_ctrl = v4l2_subdev_g_ctrl,
+	.s_ctrl = v4l2_subdev_s_ctrl,
+	.g_ext_ctrls = v4l2_subdev_g_ext_ctrls,
+	.try_ext_ctrls = v4l2_subdev_try_ext_ctrls,
+	.s_ext_ctrls = v4l2_subdev_s_ext_ctrls,
+
+  Note: this is a temporary solution only. Once all V4L2 drivers that depend
+  on subdev drivers are converted to the control framework these helpers will
+  no longer be needed.
+
+1.4) Clean up the handler at the end:
+
+	v4l2_ctrl_handler_free(&foo->ctrl_handler);
+
+
+2) Add controls:
+
+You add non-menu controls by calling v4l2_ctrl_new_std:
+
+	struct v4l2_ctrl *v4l2_ctrl_new_std(struct v4l2_ctrl_handler *hdl,
+			const struct v4l2_ctrl_ops *ops,
+			u32 id, s32 min, s32 max, u32 step, s32 def);
+
+Menu controls are added by calling v4l2_ctrl_new_std_menu:
+
+	struct v4l2_ctrl *v4l2_ctrl_new_std_menu(struct v4l2_ctrl_handler *hdl,
+			const struct v4l2_ctrl_ops *ops,
+			u32 id, s32 max, s32 skip_mask, s32 def);
+
+These functions are typically called right after the v4l2_ctrl_handler_init:
+
+	v4l2_ctrl_handler_init(&foo->ctrl_handler, nr_of_controls);
+	v4l2_ctrl_new_std(&foo->ctrl_handler, &foo_ctrl_ops,
+			V4L2_CID_BRIGHTNESS, 0, 255, 1, 128);
+	v4l2_ctrl_new_std(&foo->ctrl_handler, &foo_ctrl_ops,
+			V4L2_CID_CONTRAST, 0, 255, 1, 128);
+	v4l2_ctrl_new_std_menu(&foo->ctrl_handler, &foo_ctrl_ops,
+			V4L2_CID_POWER_LINE_FREQUENCY,
+			V4L2_CID_POWER_LINE_FREQUENCY_60HZ, 0,
+			V4L2_CID_POWER_LINE_FREQUENCY_DISABLED);
+	...
+	if (foo->ctrl_handler.error) {
+		int err = foo->ctrl_handler.error;
+
+		v4l2_ctrl_handler_free(&foo->ctrl_handler);
+		return err;
+	}
+
+The v4l2_ctrl_new_std function returns the v4l2_ctrl pointer to the new
+control, but if you do not need to access the pointer outside the control ops,
+then there is no need to store it.
+
+The v4l2_ctrl_new_std function will fill in most fields based on the control
+ID except for the min, max, step and default values. These are passed in the
+last four arguments. These values are driver specific while control attributes
+like type, name, flags are all global. The control's current value will be set
+to the default value.
+
+The v4l2_ctrl_new_std_menu function is very similar but it is used for menu
+controls. There is no min argument since that is always 0 for menu controls,
+and instead of a step there is a skip_mask argument: if bit X is 1, then menu
+item X is skipped.
+
+Note that if something fails, the function will return NULL or an error and
+set ctrl_handler->error to the error code. If ctrl_handler->error was already
+set, then it will just return and do nothing. This is also true for
+v4l2_ctrl_handler_init if it cannot allocate the internal data structure.
+
+This makes it easy to init the handler and just add all controls and only check
+the error code at the end. Saves a lot of repetitive error checking.
+
+It is recommended to add controls in ascending control ID order: it will be
+a bit faster that way.
+
+3) Optionally force initial control setup:
+
+	v4l2_ctrl_handler_setup(&foo->ctrl_handler);
+
+This will call s_ctrl for all controls unconditionally. Effectively this
+initializes the hardware to the default control values. It is recommended
+that you do this as this ensures that both the internal data structures and
+the hardware are in sync.
+
+4) Finally: implement the v4l2_ctrl_ops
+
+	static const struct v4l2_ctrl_ops foo_ctrl_ops = {
+		.s_ctrl = foo_s_ctrl,
+	};
+
+Usually all you need is s_ctrl:
+
+	static int foo_s_ctrl(struct v4l2_ctrl *ctrl)
+	{
+		struct foo *state = container_of(ctrl->handler, struct foo, ctrl_handler);
+
+		switch (ctrl->id) {
+		case V4L2_CID_BRIGHTNESS:
+			write_reg(0x123, ctrl->val);
+			break;
+		case V4L2_CID_CONTRAST:
+			write_reg(0x456, ctrl->val);
+			break;
+		}
+		return 0;
+	}
+
+The control ops are called with the v4l2_ctrl pointer as argument.
+The new control value has already been validated, so all you need to do is
+to actually update the hardware registers.
+
+You're done! And this is sufficient for most of the drivers we have. No need
+to do any validation of control values, or implement QUERYCTRL/QUERYMENU. And
+G/S_CTRL as well as G/TRY/S_EXT_CTRLS are automatically supported.
+
+
+==============================================================================
+
+The remainder of this document deals with more advanced topics and scenarios.
+In practice the basic usage as described above is sufficient for most drivers.
+
+===============================================================================
+
+
+Inheriting Controls
+===================
+
+When a sub-device is registered with a V4L2 driver by calling
+v4l2_device_register_subdev() and the ctrl_handler fields of both v4l2_subdev
+and v4l2_device are set, then the controls of the subdev will become
+automatically available in the V4L2 driver as well. If the subdev driver
+contains controls that already exist in the V4L2 driver, then those will be
+skipped (so a V4L2 driver can always override a subdev control).
+
+What happens here is that v4l2_device_register_subdev() calls
+v4l2_ctrl_add_handler() adding the controls of the subdev to the controls
+of v4l2_device.
+
+
+Accessing Control Values
+========================
+
+The v4l2_ctrl struct contains these two unions:
+
+	/* The current control value. */
+	union {
+		s32 val;
+		s64 val64;
+		char *string;
+	} cur;
+
+	/* The new control value. */
+	union {
+		s32 val;
+		s64 val64;
+		char *string;
+	};
+
+Within the control ops you can freely use these. The val and val64 speak for
+themselves. The string pointers point to character buffers of length
+ctrl->maximum + 1, and are always 0-terminated.
+
+In most cases 'cur' contains the current cached control value. When you create
+a new control this value is made identical to the default value. After calling
+v4l2_ctrl_handler_setup() this value is passed to the hardware. It is generally
+a good idea to call this function.
+
+Whenever a new value is set that new value is automatically cached. This means
+that most drivers do not need to implement the g_volatile_ctrl() op. The
+exception is for controls that return a volatile register such as a signal
+strength read-out that changes continuously. In that case you will need to
+implement g_volatile_ctrl like this:
+
+	static int foo_g_volatile_ctrl(struct v4l2_ctrl *ctrl)
+	{
+		switch (ctrl->id) {
+		case V4L2_CID_BRIGHTNESS:
+			ctrl->cur.val = read_reg(0x123);
+			break;
+		}
+	}
+
+The 'new value' union is not used in g_volatile_ctrl. In general controls
+that need to implement g_volatile_ctrl are read-only controls.
+
+To mark a control as volatile you have to set the is_volatile flag:
+
+	ctrl = v4l2_ctrl_new_std(&sd->ctrl_handler, ...);
+	if (ctrl)
+		ctrl->is_volatile = 1;
+
+For try/s_ctrl the new values (i.e. as passed by the user) are filled in and
+you can modify them in try_ctrl or set them in s_ctrl. The 'cur' union
+contains the current value, which you can use (but not change!) as well.
+
+If s_ctrl returns 0 (OK), then the control framework will copy the new final
+values to the 'cur' union.
+
+While in g_volatile/s/try_ctrl you can access the value of all controls owned
+by the same handler since the handler's lock is held. If you need to access
+the value of controls owned by other handlers, then you have to be very careful
+not to introduce deadlocks.
+
+Outside of the control ops you have to go through to helper functions to get
+or set a single control value safely in your driver:
+
+	s32 v4l2_ctrl_g_ctrl(struct v4l2_ctrl *ctrl);
+	int v4l2_ctrl_s_ctrl(struct v4l2_ctrl *ctrl, s32 val);
+
+These functions go through the control framework just as VIDIOC_G/S_CTRL ioctls
+do. Don't use these inside the control ops g_volatile/s/try_ctrl, though, that
+will result in a deadlock since these helpers lock the handler as well.
+
+You can also take the handler lock yourself:
+
+	mutex_lock(&state->ctrl_handler.lock);
+	printk(KERN_INFO "String value is '%s'\n", ctrl1->cur.string);
+	printk(KERN_INFO "Integer value is '%s'\n", ctrl2->cur.val);
+	mutex_unlock(&state->ctrl_handler.lock);
+
+
+Menu Controls
+=============
+
+The v4l2_ctrl struct contains this union:
+
+	union {
+		u32 step;
+		u32 menu_skip_mask;
+	};
+
+For menu controls menu_skip_mask is used. What it does is that it allows you
+to easily exclude certain menu items. This is used in the VIDIOC_QUERYMENU
+implementation where you can return -EINVAL if a certain menu item is not
+present. Note that VIDIOC_QUERYCTRL always returns a step value of 1 for
+menu controls.
+
+A good example is the MPEG Audio Layer II Bitrate menu control where the
+menu is a list of standardized possible bitrates. But in practice hardware
+implementations will only support a subset of those. By setting the skip
+mask you can tell the framework which menu items should be skipped. Setting
+it to 0 means that all menu items are supported.
+
+You set this mask either through the v4l2_ctrl_config struct for a custom
+control, or by calling v4l2_ctrl_new_std_menu().
+
+
+Custom Controls
+===============
+
+Driver specific controls can be created using v4l2_ctrl_new_custom():
+
+	static const struct v4l2_ctrl_config ctrl_filter = {
+		.ops = &ctrl_custom_ops,
+		.id = V4L2_CID_MPEG_CX2341X_VIDEO_SPATIAL_FILTER,
+		.name = "Spatial Filter",
+		.type = V4L2_CTRL_TYPE_INTEGER,
+		.flags = V4L2_CTRL_FLAG_SLIDER,
+		.max = 15,
+		.step = 1,
+	};
+
+	ctrl = v4l2_ctrl_new_custom(&foo->ctrl_handler, &ctrl_filter, NULL);
+
+The last argument is the priv pointer which can be set to driver-specific
+private data.
+
+The v4l2_ctrl_config struct also has fields to set the is_private and is_volatile
+flags.
+
+If the name field is not set, then the framework will assume this is a standard
+control and will fill in the name, type and flags fields accordingly.
+
+
+Active and Grabbed Controls
+===========================
+
+If you get more complex relationships between controls, then you may have to
+activate and deactivate controls. For example, if the Chroma AGC control is
+on, then the Chroma Gain control is inactive. That is, you may set it, but
+the value will not be used by the hardware as long as the automatic gain
+control is on. Typically user interfaces can disable such input fields.
+
+You can set the 'active' status using v4l2_ctrl_activate(). By default all
+controls are active. Note that the framework does not check for this flag.
+It is meant purely for GUIs. The function is typically called from within
+s_ctrl.
+
+The other flag is the 'grabbed' flag. A grabbed control means that you cannot
+change it because it is in use by some resource. Typical examples are MPEG
+bitrate controls that cannot be changed while capturing is in progress.
+
+If a control is set to 'grabbed' using v4l2_ctrl_grab(), then the framework
+will return -EBUSY if an attempt is made to set this control. The
+v4l2_ctrl_grab() function is typically called from the driver when it
+starts or stops streaming.
+
+
+Control Clusters
+================
+
+By default all controls are independent from the others. But in more
+complex scenarios you can get dependencies from one control to another.
+In that case you need to 'cluster' them:
+
+	struct foo {
+		struct v4l2_ctrl_handler ctrl_handler;
+#define AUDIO_CL_VOLUME (0)
+#define AUDIO_CL_MUTE   (1)
+		struct v4l2_ctrl *audio_cluster[2];
+		...
+	};
+
+	state->audio_cluster[AUDIO_CL_VOLUME] =
+		v4l2_ctrl_new_std(&state->ctrl_handler, ...);
+	state->audio_cluster[AUDIO_CL_MUTE] =
+		v4l2_ctrl_new_std(&state->ctrl_handler, ...);
+	v4l2_ctrl_cluster(ARRAY_SIZE(state->audio_cluster), state->audio_cluster);
+
+From now on whenever one or more of the controls belonging to the same
+cluster is set (or 'gotten', or 'tried'), only the control ops of the first
+control ('volume' in this example) is called. You effectively create a new
+composite control. Similar to how a 'struct' works in C.
+
+So when s_ctrl is called with V4L2_CID_AUDIO_VOLUME as argument, you should set
+all two controls belonging to the audio_cluster:
+
+	static int foo_s_ctrl(struct v4l2_ctrl *ctrl)
+	{
+		struct foo *state = container_of(ctrl->handler, struct foo, ctrl_handler);
+
+		switch (ctrl->id) {
+		case V4L2_CID_AUDIO_VOLUME: {
+			struct v4l2_ctrl *mute = ctrl->cluster[AUDIO_CL_MUTE];
+
+			write_reg(0x123, mute->val ? 0 : ctrl->val);
+			break;
+		}
+		case V4L2_CID_CONTRAST:
+			write_reg(0x456, ctrl->val);
+			break;
+		}
+		return 0;
+	}
+
+In the example above the following are equivalent for the VOLUME case:
+
+	ctrl == ctrl->cluster[AUDIO_CL_VOLUME] == state->audio_cluster[AUDIO_CL_VOLUME]
+	ctrl->cluster[AUDIO_CL_MUTE] == state->audio_cluster[AUDIO_CL_MUTE]
+
+Note that controls in a cluster may be NULL. For example, if for some
+reason mute was never added (because the hardware doesn't support that
+particular feature), then mute will be NULL. So in that case we have a
+cluster of 2 controls, of which only 1 is actually instantiated. The
+only restriction is that the first control of the cluster must always be
+present, since that is the 'master' control of the cluster. The master
+control is the one that identifies the cluster and that provides the
+pointer to the v4l2_ctrl_ops struct that is used for that cluster.
+
+Obviously, all controls in the cluster array must be initialized to either
+a valid control or to NULL.
+
+
+VIDIOC_LOG_STATUS Support
+=========================
+
+This ioctl allow you to dump the current status of a driver to the kernel log.
+The v4l2_ctrl_handler_log_status(ctrl_handler, prefix) can be used to dump the
+value of the controls owned by the given handler to the log. You can supply a
+prefix as well. If the prefix didn't end with a space, then ': ' will be added
+for you.
+
+
+Different Handlers for Different Video Nodes
+============================================
+
+Usually the V4L2 driver has just one control handler that is global for
+all video nodes. But you can also specify different control handlers for
+different video nodes. You can do that by manually setting the ctrl_handler
+field of struct video_device.
+
+That is no problem if there are no subdevs involved but if there are, then
+you need to block the automatic merging of subdev controls to the global
+control handler. You do that by simply setting the ctrl_handler field in
+struct v4l2_device to NULL. Now v4l2_device_register_subdev() will no longer
+merge subdev controls.
+
+After each subdev was added, you will then have to call v4l2_ctrl_add_handler
+manually to add the subdev's control handler (sd->ctrl_handler) to the desired
+control handler. This control handler may be specific to the video_device or
+for a subset of video_device's. For example: the radio device nodes only have
+audio controls, while the video and vbi device nodes share the same control
+handler for the audio and video controls.
+
+If you want to have one handler (e.g. for a radio device node) have a subset
+of another handler (e.g. for a video device node), then you should first add
+the controls to the first handler, add the other controls to the second
+handler and finally add the first handler to the second. For example:
+
+	v4l2_ctrl_new_std(&radio_ctrl_handler, &radio_ops, V4L2_CID_AUDIO_VOLUME, ...);
+	v4l2_ctrl_new_std(&radio_ctrl_handler, &radio_ops, V4L2_CID_AUDIO_MUTE, ...);
+	v4l2_ctrl_new_std(&video_ctrl_handler, &video_ops, V4L2_CID_BRIGHTNESS, ...);
+	v4l2_ctrl_new_std(&video_ctrl_handler, &video_ops, V4L2_CID_CONTRAST, ...);
+	v4l2_ctrl_add_handler(&video_ctrl_handler, &radio_ctrl_handler);
+
+Or you can add specific controls to a handler:
+
+	volume = v4l2_ctrl_new_std(&video_ctrl_handler, &ops, V4L2_CID_AUDIO_VOLUME, ...);
+	v4l2_ctrl_new_std(&video_ctrl_handler, &ops, V4L2_CID_BRIGHTNESS, ...);
+	v4l2_ctrl_new_std(&video_ctrl_handler, &ops, V4L2_CID_CONTRAST, ...);
+	v4l2_ctrl_add_ctrl(&radio_ctrl_handler, volume);
+
+What you should not do is make two identical controls for two handlers.
+For example:
+
+	v4l2_ctrl_new_std(&radio_ctrl_handler, &radio_ops, V4L2_CID_AUDIO_MUTE, ...);
+	v4l2_ctrl_new_std(&video_ctrl_handler, &video_ops, V4L2_CID_AUDIO_MUTE, ...);
+
+This would be bad since muting the radio would not change the video mute
+control. The rule is to have one control for each hardware 'knob' that you
+can twiddle.
+
+
+Finding Controls
+================
+
+Normally you have created the controls yourself and you can store the struct
+v4l2_ctrl pointer into your own struct.
+
+But sometimes you need to find a control from another handler that you do
+not own. For example, if you have to find a volume control from a subdev.
+
+You can do that by calling v4l2_ctrl_find:
+
+	struct v4l2_ctrl *volume;
+
+	volume = v4l2_ctrl_find(sd->ctrl_handler, V4L2_CID_AUDIO_VOLUME);
+
+Since v4l2_ctrl_find will lock the handler you have to be careful where you
+use it. For example, this is not a good idea:
+
+	struct v4l2_ctrl_handler ctrl_handler;
+
+	v4l2_ctrl_new_std(&ctrl_handler, &video_ops, V4L2_CID_BRIGHTNESS, ...);
+	v4l2_ctrl_new_std(&ctrl_handler, &video_ops, V4L2_CID_CONTRAST, ...);
+
+...and in video_ops.s_ctrl:
+
+	case V4L2_CID_BRIGHTNESS:
+		contrast = v4l2_find_ctrl(&ctrl_handler, V4L2_CID_CONTRAST);
+		...
+
+When s_ctrl is called by the framework the ctrl_handler.lock is already taken, so
+attempting to find another control from the same handler will deadlock.
+
+It is recommended not to use this function from inside the control ops.
+
+
+Inheriting Controls
+===================
+
+When one control handler is added to another using v4l2_ctrl_add_handler, then
+by default all controls from one are merged to the other. But a subdev might
+have low-level controls that make sense for some advanced embedded system, but
+not when it is used in consumer-level hardware. In that case you want to keep
+those low-level controls local to the subdev. You can do this by simply
+setting the 'is_private' flag of the control to 1:
+
+	static const struct v4l2_ctrl_config ctrl_private = {
+		.ops = &ctrl_custom_ops,
+		.id = V4L2_CID_...,
+		.name = "Some Private Control",
+		.type = V4L2_CTRL_TYPE_INTEGER,
+		.max = 15,
+		.step = 1,
+		.is_private = 1,
+	};
+
+	ctrl = v4l2_ctrl_new_custom(&foo->ctrl_handler, &ctrl_private, NULL);
+
+These controls will now be skipped when v4l2_ctrl_add_handler is called.
+
+
+V4L2_CTRL_TYPE_CTRL_CLASS Controls
+==================================
+
+Controls of this type can be used by GUIs to get the name of the control class.
+A fully featured GUI can make a dialog with multiple tabs with each tab
+containing the controls belonging to a particular control class. The name of
+each tab can be found by querying a special control with ID <control class | 1>.
+
+Drivers do not have to care about this. The framework will automatically add
+a control of this type whenever the first control belonging to a new control
+class is added.
+
+
+Differences from the Spec
+=========================
+
+There are a few places where the framework acts slightly differently from the
+V4L2 Specification. Those differences are described in this section. We will
+have to see whether we need to adjust the spec or not.
+
+1) It is no longer required to have all controls contained in a
+v4l2_ext_control array be from the same control class. The framework will be
+able to handle any type of control in the array. You need to set ctrl_class
+to 0 in order to enable this. If ctrl_class is non-zero, then it will still
+check that all controls belong to that control class.
+
+If you set ctrl_class to 0 and count to 0, then it will only return an error
+if there are no controls at all.
+
+2) Clarified the way error_idx works. For get and set it will be equal to
+count if nothing was done yet. If it is less than count then only the controls
+up to error_idx-1 were successfully applied.
+
+3) When attempting to read a button control the framework will return -EACCES
+instead of -EINVAL as stated in the spec. It seems to make more sense since
+button controls are write-only controls.
+
+4) Attempting to write to a read-only control will return -EACCES instead of
+-EINVAL as the spec says.
+
+5) The spec does not mention what should happen when you try to set/get a
+control class controls. ivtv currently returns -EINVAL (indicating that the
+control ID does not exist) while the framework will return -EACCES, which
+makes more sense.
+
+
+Proposals for Extensions
+========================
+
+Some ideas for future extensions to the spec:
+
+1) Add a V4L2_CTRL_FLAG_HEX to have values shown as hexadecimal instead of
+decimal. Useful for e.g. video_mute_yuv.
+
+2) It is possible to mark in the controls array which controls have been
+successfully written and which failed by for example adding a bit to the
+control ID. Not sure if it is worth the effort, though.
+
+3) Trying to set volatile inactive controls should result in -EACCESS.
+
+4) Add a new flag to mark volatile controls. Any application that wants
+to store the state of the controls can then skip volatile inactive controls.
+Currently it is not possible to detect such controls.

MAINTAINERS

@@ -2203,6 +2203,12 @@ F:	drivers/misc/cb710/
 F:	drivers/mmc/host/cb710-mmc.*
 F:	include/linux/cb710.h
 
+ENE KB2426 (ENE0100/ENE020XX) INFRARED RECEIVER
+M:	Maxim Levitsky <maximlevitsky@gmail.com>
+S:	Maintained
+F:	drivers/media/IR/ene_ir.c
+F:	drivers/media/IR/ene_ir.h
+
 EPSON 1355 FRAMEBUFFER DRIVER
 M:	Christopher Hoover <ch@murgatroid.com>
 M:	Christopher Hoover <ch@hpl.hp.com>

drivers/media/IR/Kconfig

@@ -1,8 +1,10 @@
-config IR_CORE
-	tristate
+menuconfig IR_CORE
+	tristate "Infrared remote controller adapters"
 	depends on INPUT
 	default INPUT
 
+if IR_CORE
+
 config VIDEO_IR
 	tristate
 	depends on IR_CORE
@@ -16,7 +18,7 @@ config LIRC
 	   Enable this option to build the Linux Infrared Remote
 	   Control (LIRC) core device interface driver. The LIRC
 	   interface passes raw IR to and from userspace, where the
-	   LIRC daemon handles protocol decoding for IR reception ann
+	   LIRC daemon handles protocol decoding for IR reception and
 	   encoding for IR transmitting (aka "blasting").
 
 source "drivers/media/IR/keymaps/Kconfig"
@@ -103,3 +105,31 @@ config IR_MCEUSB
 
 	   To compile this driver as a module, choose M here: the
 	   module will be called mceusb.
+
+config IR_ENE
+	tristate "ENE eHome Receiver/Transciever (pnp id: ENE0100/ENE02xxx)"
+	depends on PNP
+	depends on IR_CORE
+	---help---
+	   Say Y here to enable support for integrated infrared receiver
+	   /transciever made by ENE.
+
+	   You can see if you have it by looking at lspnp output.
+	   Output should include ENE0100 ENE0200 or something similiar.
+
+	   To compile this driver as a module, choose M here: the
+	   module will be called ene_ir.
+
+config IR_STREAMZAP
+	tristate "Streamzap PC Remote IR Receiver"
+	depends on USB_ARCH_HAS_HCD
+	depends on IR_CORE
+	select USB
+	---help---
+	   Say Y here if you want to use a Streamzap PC Remote
+	   Infrared Receiver.
+
+	   To compile this driver as a module, choose M here: the
+	   module will be called streamzap.
+
+endif #IR_CORE

drivers/media/IR/Makefile

@@ -16,3 +16,5 @@ obj-$(CONFIG_IR_LIRC_CODEC) += ir-lirc-codec.o
 # stand-alone IR receivers/transmitters
 obj-$(CONFIG_IR_IMON) += imon.o
 obj-$(CONFIG_IR_MCEUSB) += mceusb.o
+obj-$(CONFIG_IR_ENE) += ene_ir.o
+obj-$(CONFIG_IR_STREAMZAP) += streamzap.o

drivers/media/IR/ene_ir.c

@@ -0,0 +1,1023 @@
+/*
+ * driver for ENE KB3926 B/C/D CIR (pnp id: ENE0XXX)
+ *
+ * Copyright (C) 2010 Maxim Levitsky <maximlevitsky@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307
+ * USA
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/pnp.h>
+#include <linux/io.h>
+#include <linux/interrupt.h>
+#include <linux/sched.h>
+#include <linux/slab.h>
+#include <linux/input.h>
+#include <media/ir-core.h>
+#include <media/ir-common.h>
+#include "ene_ir.h"
+
+
+static int sample_period = -1;
+static int enable_idle = 1;
+static int input = 1;
+static int debug;
+static int txsim;
+
+static int ene_irq_status(struct ene_device *dev);
+
+/* read a hardware register */
+static u8 ene_hw_read_reg(struct ene_device *dev, u16 reg)
+{
+	u8 retval;
+	outb(reg >> 8, dev->hw_io + ENE_ADDR_HI);
+	outb(reg & 0xFF, dev->hw_io + ENE_ADDR_LO);
+	retval = inb(dev->hw_io + ENE_IO);
+
+	ene_dbg_verbose("reg %04x == %02x", reg, retval);
+	return retval;
+}
+
+/* write a hardware register */
+static void ene_hw_write_reg(struct ene_device *dev, u16 reg, u8 value)
+{
+	outb(reg >> 8, dev->hw_io + ENE_ADDR_HI);
+	outb(reg & 0xFF, dev->hw_io + ENE_ADDR_LO);
+	outb(value, dev->hw_io + ENE_IO);
+
+	ene_dbg_verbose("reg %04x <- %02x", reg, value);
+}
+
+/* change specific bits in hardware register */
+static void ene_hw_write_reg_mask(struct ene_device *dev,
+				  u16 reg, u8 value, u8 mask)
+{
+	u8 regvalue;
+
+	outb(reg >> 8, dev->hw_io + ENE_ADDR_HI);
+	outb(reg & 0xFF, dev->hw_io + ENE_ADDR_LO);
+
+	regvalue = inb(dev->hw_io + ENE_IO) & ~mask;
+	regvalue |= (value & mask);
+	outb(regvalue, dev->hw_io + ENE_IO);
+
+	ene_dbg_verbose("reg %04x <- %02x (mask=%02x)", reg, value, mask);
+}
+
+/* detect hardware features */
+static int ene_hw_detect(struct ene_device *dev)
+{
+	u8 chip_major, chip_minor;
+	u8 hw_revision, old_ver;
+	u8 tmp;
+	u8 fw_capabilities;
+	int pll_freq;
+
+	tmp = ene_hw_read_reg(dev, ENE_HW_UNK);
+	ene_hw_write_reg(dev, ENE_HW_UNK, tmp & ~ENE_HW_UNK_CLR);
+
+	chip_major = ene_hw_read_reg(dev, ENE_HW_VER_MAJOR);
+	chip_minor = ene_hw_read_reg(dev, ENE_HW_VER_MINOR);
+
+	ene_hw_write_reg(dev, ENE_HW_UNK, tmp);
+	hw_revision = ene_hw_read_reg(dev, ENE_HW_VERSION);
+	old_ver = ene_hw_read_reg(dev, ENE_HW_VER_OLD);
+
+	pll_freq = (ene_hw_read_reg(dev, ENE_PLLFRH) << 4) +
+		(ene_hw_read_reg(dev, ENE_PLLFRL) >> 4);
+
+	if (pll_freq != 1000)
+		dev->rx_period_adjust = 4;
+	else
+		dev->rx_period_adjust = 2;
+
+
+	ene_printk(KERN_NOTICE, "PLL freq = %d\n", pll_freq);
+
+	if (hw_revision == 0xFF) {
+
+		ene_printk(KERN_WARNING, "device seems to be disabled\n");
+		ene_printk(KERN_WARNING,
+			"send a mail to lirc-list@lists.sourceforge.net\n");
+		ene_printk(KERN_WARNING, "please attach output of acpidump\n");
+		return -ENODEV;
+	}
+
+	if (chip_major == 0x33) {
+		ene_printk(KERN_WARNING, "chips 0x33xx aren't supported\n");
+		return -ENODEV;
+	}
+
+	if (chip_major == 0x39 && chip_minor == 0x26 && hw_revision == 0xC0) {
+		dev->hw_revision = ENE_HW_C;
+	} else if (old_ver == 0x24 && hw_revision == 0xC0) {
+		dev->hw_revision = ENE_HW_B;
+		ene_printk(KERN_NOTICE, "KB3926B detected\n");
+	} else {
+		dev->hw_revision = ENE_HW_D;
+		ene_printk(KERN_WARNING,
+			"unknown ENE chip detected, assuming KB3926D\n");
+		ene_printk(KERN_WARNING,
+			"driver support might be not complete");
+
+	}
+
+	ene_printk(KERN_DEBUG,
+		"chip is 0x%02x%02x - kbver = 0x%02x, rev = 0x%02x\n",
+			chip_major, chip_minor, old_ver, hw_revision);
+
+	/* detect features hardware supports */
+	if (dev->hw_revision < ENE_HW_C)
+		return 0;
+
+	fw_capabilities = ene_hw_read_reg(dev, ENE_FW2);
+	ene_dbg("Firmware capabilities: %02x", fw_capabilities);
+
+	dev->hw_gpio40_learning = fw_capabilities & ENE_FW2_GP40_AS_LEARN;
+	dev->hw_learning_and_tx_capable = fw_capabilities & ENE_FW2_LEARNING;
+
+	dev->hw_fan_as_normal_input = dev->hw_learning_and_tx_capable &&
+	    (fw_capabilities & ENE_FW2_FAN_AS_NRML_IN);
+
+	ene_printk(KERN_NOTICE, "hardware features:\n");
+	ene_printk(KERN_NOTICE,
+		"learning and transmit %s, gpio40_learn %s, fan_in %s\n",
+	       dev->hw_learning_and_tx_capable ? "on" : "off",
+	       dev->hw_gpio40_learning ? "on" : "off",
+	       dev->hw_fan_as_normal_input ? "on" : "off");
+
+	if (dev->hw_learning_and_tx_capable) {
+		ene_printk(KERN_WARNING,
+		"Device supports transmitting, but that support is\n");
+		ene_printk(KERN_WARNING,
+		"lightly tested. Please test it and mail\n");
+		ene_printk(KERN_WARNING,
+		"lirc-list@lists.sourceforge.net\n");
+	}
+	return 0;
+}
+
+/* this enables/disables IR input via gpio40*/
+static void ene_enable_gpio40_receive(struct ene_device *dev, int enable)
+{
+	ene_hw_write_reg_mask(dev, ENE_CIR_CONF2, enable ?
+			      0 : ENE_CIR_CONF2_GPIO40DIS,
+			      ENE_CIR_CONF2_GPIO40DIS);
+}
+
+/* this enables/disables IR via standard input */
+static void ene_enable_normal_receive(struct ene_device *dev, int enable)
+{
+	ene_hw_write_reg(dev, ENE_CIR_CONF1, enable ? ENE_CIR_CONF1_RX_ON : 0);
+}
+
+/* this enables/disables IR input via unused fan tachtometer input */
+static void ene_enable_fan_receive(struct ene_device *dev, int enable)
+{
+	if (!enable)
+		ene_hw_write_reg(dev, ENE_FAN_AS_IN1, 0);
+	else {
+		ene_hw_write_reg(dev, ENE_FAN_AS_IN1, ENE_FAN_AS_IN1_EN);
+		ene_hw_write_reg(dev, ENE_FAN_AS_IN2, ENE_FAN_AS_IN2_EN);
+	}
+	dev->rx_fan_input_inuse = enable;
+}
+
+
+/* Sense current received carrier */
+static int ene_rx_sense_carrier(struct ene_device *dev)
+{
+	int period = ene_hw_read_reg(dev, ENE_RX_CARRIER);
+	int carrier;
+	ene_dbg("RX: hardware carrier period = %02x", period);
+
+	if (!(period & ENE_RX_CARRIER_VALID))
+		return 0;
+
+	period &= ~ENE_RX_CARRIER_VALID;
+
+	if (!period)
+		return 0;
+
+	carrier = 2000000 / period;
+	ene_dbg("RX: sensed carrier = %d Hz", carrier);
+	return carrier;
+}
+
+/* determine which input to use*/
+static void ene_rx_set_inputs(struct ene_device *dev)
+{
+	int learning_mode = dev->learning_enabled;
+
+	ene_dbg("RX: setup receiver, learning mode = %d", learning_mode);
+
+	ene_enable_normal_receive(dev, 1);
+
+	/* old hardware doesn't support learning mode for sure */
+	if (dev->hw_revision <= ENE_HW_B)
+		return;
+
+	/* receiver not learning capable, still set gpio40 correctly */
+	if (!dev->hw_learning_and_tx_capable) {
+		ene_enable_gpio40_receive(dev, !dev->hw_gpio40_learning);
+		return;
+	}
+
+	/* enable learning mode */
+	if (learning_mode) {
+		ene_enable_gpio40_receive(dev, dev->hw_gpio40_learning);
+
+		/* fan input is not used for learning */
+		if (dev->hw_fan_as_normal_input)
+			ene_enable_fan_receive(dev, 0);
+
+	/* disable learning mode */
+	} else {
+		if (dev->hw_fan_as_normal_input) {
+			ene_enable_fan_receive(dev, 1);
+			ene_enable_normal_receive(dev, 0);
+		} else
+			ene_enable_gpio40_receive(dev,
+					!dev->hw_gpio40_learning);
+	}
+
+	/* set few additional settings for this mode */
+	ene_hw_write_reg_mask(dev, ENE_CIR_CONF1, learning_mode ?
+			      ENE_CIR_CONF1_LEARN1 : 0, ENE_CIR_CONF1_LEARN1);
+
+	ene_hw_write_reg_mask(dev, ENE_CIR_CONF2, learning_mode ?
+			      ENE_CIR_CONF2_LEARN2 : 0, ENE_CIR_CONF2_LEARN2);
+
+	if (dev->rx_fan_input_inuse) {
+		dev->props->rx_resolution = ENE_SAMPLE_PERIOD_FAN * 1000;
+
+		dev->props->timeout =
+			ENE_FAN_VALUE_MASK * ENE_SAMPLE_PERIOD_FAN * 1000;
+	} else {
+		dev->props->rx_resolution = sample_period * 1000;
+		dev->props->timeout = ENE_MAXGAP * 1000;
+	}
+}
+
+/* Enable the device for receive */
+static void ene_rx_enable(struct ene_device *dev)
+{
+	u8 reg_value;
+
+	if (dev->hw_revision < ENE_HW_C) {
+		ene_hw_write_reg(dev, ENEB_IRQ, dev->irq << 1);
+		ene_hw_write_reg(dev, ENEB_IRQ_UNK1, 0x01);
+	} else {
+		reg_value = ene_hw_read_reg(dev, ENEC_IRQ) & 0xF0;
+		reg_value |= ENEC_IRQ_UNK_EN;
+		reg_value &= ~ENEC_IRQ_STATUS;
+		reg_value |= (dev->irq & ENEC_IRQ_MASK);
+		ene_hw_write_reg(dev, ENEC_IRQ, reg_value);
+		ene_hw_write_reg(dev, ENE_TX_UNK1, 0x63);
+	}
+
+	ene_hw_write_reg(dev, ENE_CIR_CONF2, 0x00);
+	ene_rx_set_inputs(dev);
+
+	/* set sampling period */
+	ene_hw_write_reg(dev, ENE_CIR_SAMPLE_PERIOD, sample_period);
+
+	/* ack any pending irqs - just in case */
+	ene_irq_status(dev);
+
+	/* enable firmware bits */
+	ene_hw_write_reg_mask(dev, ENE_FW1,
+			      ENE_FW1_ENABLE | ENE_FW1_IRQ,
+			      ENE_FW1_ENABLE | ENE_FW1_IRQ);
+
+	/* enter idle mode */
+	ir_raw_event_set_idle(dev->idev, 1);
+	ir_raw_event_reset(dev->idev);
+
+}
+
+/* Disable the device receiver */
+static void ene_rx_disable(struct ene_device *dev)
+{
+	/* disable inputs */
+	ene_enable_normal_receive(dev, 0);
+
+	if (dev->hw_fan_as_normal_input)
+		ene_enable_fan_receive(dev, 0);
+
+	/* disable hardware IRQ and firmware flag */
+	ene_hw_write_reg_mask(dev, ENE_FW1, 0, ENE_FW1_ENABLE | ENE_FW1_IRQ);
+
+	ir_raw_event_set_idle(dev->idev, 1);
+	ir_raw_event_reset(dev->idev);
+}
+
+
+/* prepare transmission */
+static void ene_tx_prepare(struct ene_device *dev)
+{
+	u8 conf1;
+
+	conf1 = ene_hw_read_reg(dev, ENE_CIR_CONF1);
+	dev->saved_conf1 = conf1;
+
+	if (dev->hw_revision == ENE_HW_C)
+		conf1 &= ~ENE_CIR_CONF1_TX_CLEAR;
+
+	/* Enable TX engine */
+	conf1 |= ENE_CIR_CONF1_TX_ON;
+
+	/* Set carrier */
+	if (dev->tx_period) {
+
+		/* NOTE: duty cycle handling is just a guess, it might
+			not be aviable. Default values were tested */
+		int tx_period_in500ns = dev->tx_period * 2;
+
+		int tx_pulse_width_in_500ns =
+			tx_period_in500ns / (100 / dev->tx_duty_cycle);
+
+		if (!tx_pulse_width_in_500ns)
+			tx_pulse_width_in_500ns = 1;
+
+		ene_dbg("TX: pulse distance = %d * 500 ns", tx_period_in500ns);
+		ene_dbg("TX: pulse width = %d * 500 ns",
+						tx_pulse_width_in_500ns);
+
+		ene_hw_write_reg(dev, ENE_TX_PERIOD, ENE_TX_PERIOD_UNKBIT |
+					tx_period_in500ns);
+
+		ene_hw_write_reg(dev, ENE_TX_PERIOD_PULSE,
+					tx_pulse_width_in_500ns);
+
+		conf1 |= ENE_CIR_CONF1_TX_CARR;
+	} else
+		conf1 &= ~ENE_CIR_CONF1_TX_CARR;
+
+	ene_hw_write_reg(dev, ENE_CIR_CONF1, conf1);
+
+}
+
+/* end transmission */
+static void ene_tx_complete(struct ene_device *dev)
+{
+	ene_hw_write_reg(dev, ENE_CIR_CONF1, dev->saved_conf1);
+	dev->tx_buffer = NULL;
+}
+
+/* set transmit mask */
+static void ene_tx_hw_set_transmiter_mask(struct ene_device *dev)
+{
+	u8 txport1 = ene_hw_read_reg(dev, ENE_TX_PORT1) & ~ENE_TX_PORT1_EN;
+	u8 txport2 = ene_hw_read_reg(dev, ENE_TX_PORT2) & ~ENE_TX_PORT2_EN;
+
+	if (dev->transmitter_mask & 0x01)
+		txport1 |= ENE_TX_PORT1_EN;
+
+	if (dev->transmitter_mask & 0x02)
+		txport2 |= ENE_TX_PORT2_EN;
+
+	ene_hw_write_reg(dev, ENE_TX_PORT1, txport1);
+	ene_hw_write_reg(dev, ENE_TX_PORT2, txport2);
+}
+
+/* TX one sample - must be called with dev->hw_lock*/
+static void ene_tx_sample(struct ene_device *dev)
+{
+	u8 raw_tx;
+	u32 sample;
+
+	if (!dev->tx_buffer) {
+		ene_dbg("TX: attempt to transmit NULL buffer");
+		return;
+	}
+
+	/* Grab next TX sample */
+	if (!dev->tx_sample) {
+again:
+		if (dev->tx_pos == dev->tx_len + 1) {
+			if (!dev->tx_done) {
+				ene_dbg("TX: no more data to send");
+				dev->tx_done = 1;
+				goto exit;
+			} else {
+				ene_dbg("TX: last sample sent by hardware");
+				ene_tx_complete(dev);
+				complete(&dev->tx_complete);
+				return;
+			}
+		}
+
+		sample = dev->tx_buffer[dev->tx_pos++];
+		dev->tx_sample_pulse = !dev->tx_sample_pulse;
+
+		ene_dbg("TX: sample %8d (%s)", sample, dev->tx_sample_pulse ?
+							"pulse" : "space");
+
+		dev->tx_sample = DIV_ROUND_CLOSEST(sample, ENE_TX_SMPL_PERIOD);
+
+		/* guard against too short samples */
+		if (!dev->tx_sample)
+			goto again;
+	}
+
+	raw_tx = min(dev->tx_sample , (unsigned int)ENE_TX_SMLP_MASK);
+	dev->tx_sample -= raw_tx;
+
+	if (dev->tx_sample_pulse)
+		raw_tx |= ENE_TX_PULSE_MASK;
+
+	ene_hw_write_reg(dev, ENE_TX_INPUT1 + dev->tx_reg, raw_tx);
+	dev->tx_reg = !dev->tx_reg;
+exit:
+	/* simulate TX done interrupt */
+	if (txsim)
+		mod_timer(&dev->tx_sim_timer, jiffies + HZ / 500);
+}
+
+/* timer to simulate tx done interrupt */
+static void ene_tx_irqsim(unsigned long data)
+{
+	struct ene_device *dev = (struct ene_device *)data;
+	unsigned long flags;
+
+	spin_lock_irqsave(&dev->hw_lock, flags);
+	ene_tx_sample(dev);
+	spin_unlock_irqrestore(&dev->hw_lock, flags);
+}
+
+
+/* read irq status and ack it */
+static int ene_irq_status(struct ene_device *dev)
+{
+	u8 irq_status;
+	u8 fw_flags1, fw_flags2;
+	int cur_rx_pointer;
+	int retval = 0;
+
+	fw_flags2 = ene_hw_read_reg(dev, ENE_FW2);
+	cur_rx_pointer = !!(fw_flags2 & ENE_FW2_BUF_HIGH);
+
+	if (dev->hw_revision < ENE_HW_C) {
+		irq_status = ene_hw_read_reg(dev, ENEB_IRQ_STATUS);
+
+		if (!(irq_status & ENEB_IRQ_STATUS_IR))
+			return 0;
+
+		ene_hw_write_reg(dev, ENEB_IRQ_STATUS,
+				 irq_status & ~ENEB_IRQ_STATUS_IR);
+		dev->rx_pointer = cur_rx_pointer;
+		return ENE_IRQ_RX;
+	}
+
+	irq_status = ene_hw_read_reg(dev, ENEC_IRQ);
+
+	if (!(irq_status & ENEC_IRQ_STATUS))
+		return 0;
+
+	/* original driver does that twice - a workaround ? */
+	ene_hw_write_reg(dev, ENEC_IRQ, irq_status & ~ENEC_IRQ_STATUS);
+	ene_hw_write_reg(dev, ENEC_IRQ, irq_status & ~ENEC_IRQ_STATUS);
+
+	/* clear unknown flag in F8F9 */
+	if (fw_flags2 & ENE_FW2_IRQ_CLR)
+		ene_hw_write_reg(dev, ENE_FW2, fw_flags2 & ~ENE_FW2_IRQ_CLR);
+
+	/* check if this is a TX interrupt */
+	fw_flags1 = ene_hw_read_reg(dev, ENE_FW1);
+	if (fw_flags1 & ENE_FW1_TXIRQ) {
+		ene_hw_write_reg(dev, ENE_FW1, fw_flags1 & ~ENE_FW1_TXIRQ);
+		retval |= ENE_IRQ_TX;
+	}
+
+	/* Check if this is RX interrupt */
+	if (dev->rx_pointer != cur_rx_pointer) {
+		retval |= ENE_IRQ_RX;
+		dev->rx_pointer = cur_rx_pointer;
+
+	} else if (!(retval & ENE_IRQ_TX)) {
+		ene_dbg("RX: interrupt without change in RX pointer(%d)",
+			dev->rx_pointer);
+		retval |= ENE_IRQ_RX;
+	}
+
+	if ((retval & ENE_IRQ_RX) && (retval & ENE_IRQ_TX))
+		ene_dbg("both RX and TX interrupt at same time");
+
+	return retval;
+}
+
+/* interrupt handler */
+static irqreturn_t ene_isr(int irq, void *data)
+{
+	u16 hw_value;
+	int i, hw_sample;
+	int pulse;
+	int irq_status;
+	unsigned long flags;
+	int carrier = 0;
+	irqreturn_t retval = IRQ_NONE;
+	struct ene_device *dev = (struct ene_device *)data;
+	struct ir_raw_event ev;
+
+
+	spin_lock_irqsave(&dev->hw_lock, flags);
+	irq_status = ene_irq_status(dev);
+
+	if (!irq_status)
+		goto unlock;
+
+	retval = IRQ_HANDLED;
+
+	if (irq_status & ENE_IRQ_TX) {
+
+		if (!dev->hw_learning_and_tx_capable) {
+			ene_dbg("TX interrupt on unsupported device!");
+			goto unlock;
+		}
+		ene_tx_sample(dev);
+	}
+
+	if (!(irq_status & ENE_IRQ_RX))
+		goto unlock;
+
+
+	if (dev->carrier_detect_enabled || debug)
+		carrier = ene_rx_sense_carrier(dev);
+#if 0
+	/* TODO */
+	if (dev->carrier_detect_enabled && carrier)
+		ir_raw_event_report_frequency(dev->idev, carrier);
+#endif
+
+	for (i = 0; i < ENE_SAMPLES_SIZE; i++) {
+		hw_value = ene_hw_read_reg(dev,
+				ENE_SAMPLE_BUFFER + dev->rx_pointer * 4 + i);
+
+		if (dev->rx_fan_input_inuse) {
+			/* read high part of the sample */
+			hw_value |= ene_hw_read_reg(dev,
+			    ENE_SAMPLE_BUFFER_FAN +
+					dev->rx_pointer * 4 + i) << 8;
+			pulse = hw_value & ENE_FAN_SMPL_PULS_MSK;
+
+			/* clear space bit, and other unused bits */
+			hw_value &= ENE_FAN_VALUE_MASK;
+			hw_sample = hw_value * ENE_SAMPLE_PERIOD_FAN;
+
+		} else {
+			pulse = !(hw_value & ENE_SAMPLE_SPC_MASK);
+			hw_value &= ENE_SAMPLE_VALUE_MASK;
+			hw_sample = hw_value * sample_period;
+
+			if (dev->rx_period_adjust) {
+				hw_sample *= (100 - dev->rx_period_adjust);
+				hw_sample /= 100;
+			}
+		}
+		/* no more data */
+		if (!(hw_value))
+			break;
+
+		ene_dbg("RX: %d (%s)", hw_sample, pulse ? "pulse" : "space");
+
+
+		ev.duration = hw_sample * 1000;
+		ev.pulse = pulse;
+		ir_raw_event_store_with_filter(dev->idev, &ev);
+	}
+
+	ir_raw_event_handle(dev->idev);
+unlock:
+	spin_unlock_irqrestore(&dev->hw_lock, flags);
+	return retval;
+}
+
+/* Initialize default settings */
+static void ene_setup_settings(struct ene_device *dev)
+{
+	dev->tx_period = 32;
+	dev->tx_duty_cycle = 25; /*%*/
+	dev->transmitter_mask = 3;
+
+	/* Force learning mode if (input == 2), otherwise
+		let user set it with LIRC_SET_REC_CARRIER */
+	dev->learning_enabled =
+		(input == 2 && dev->hw_learning_and_tx_capable);
+
+	dev->rx_pointer = -1;
+
+}
+
+/* outside interface: called on first open*/
+static int ene_open(void *data)
+{
+	struct ene_device *dev = (struct ene_device *)data;
+	unsigned long flags;
+
+	spin_lock_irqsave(&dev->hw_lock, flags);
+	dev->in_use = 1;
+	ene_setup_settings(dev);
+	ene_rx_enable(dev);
+	spin_unlock_irqrestore(&dev->hw_lock, flags);
+	return 0;
+}
+
+/* outside interface: called on device close*/
+static void ene_close(void *data)
+{
+	struct ene_device *dev = (struct ene_device *)data;
+	unsigned long flags;
+	spin_lock_irqsave(&dev->hw_lock, flags);
+
+	ene_rx_disable(dev);
+	dev->in_use = 0;
+	spin_unlock_irqrestore(&dev->hw_lock, flags);
+}
+
+/* outside interface: set transmitter mask */
+static int ene_set_tx_mask(void *data, u32 tx_mask)
+{
+	struct ene_device *dev = (struct ene_device *)data;
+	unsigned long flags;
+	ene_dbg("TX: attempt to set transmitter mask %02x", tx_mask);
+
+	/* invalid txmask */
+	if (!tx_mask || tx_mask & ~0x3) {
+		ene_dbg("TX: invalid mask");
+		/* return count of transmitters */
+		return 2;
+	}
+
+	spin_lock_irqsave(&dev->hw_lock, flags);
+	dev->transmitter_mask = tx_mask;
+	spin_unlock_irqrestore(&dev->hw_lock, flags);
+	return 0;
+}
+
+/* outside interface : set tx carrier */
+static int ene_set_tx_carrier(void *data, u32 carrier)
+{
+	struct ene_device *dev = (struct ene_device *)data;
+	unsigned long flags;
+	u32 period = 1000000 / carrier; /* (1 / freq) (* # usec in 1 sec) */
+
+	ene_dbg("TX: attempt to set tx carrier to %d kHz", carrier);
+
+	if (period && (period > ENE_TX_PERIOD_MAX ||
+			period < ENE_TX_PERIOD_MIN)) {
+
+		ene_dbg("TX: out of range %d-%d carrier, "
+			"falling back to 32 kHz",
+			1000 / ENE_TX_PERIOD_MIN,
+			1000 / ENE_TX_PERIOD_MAX);
+
+		period = 32; /* this is just a coincidence!!! */
+	}
+	ene_dbg("TX: set carrier to %d kHz", carrier);
+
+	spin_lock_irqsave(&dev->hw_lock, flags);
+	dev->tx_period = period;
+	spin_unlock_irqrestore(&dev->hw_lock, flags);
+	return 0;
+}
+
+
+/* outside interface: enable learning mode */
+static int ene_set_learning_mode(void *data, int enable)
+{
+	struct ene_device *dev = (struct ene_device *)data;
+	unsigned long flags;
+	if (enable == dev->learning_enabled)
+		return 0;
+
+	spin_lock_irqsave(&dev->hw_lock, flags);
+	dev->learning_enabled = enable;
+	ene_rx_set_inputs(dev);
+	spin_unlock_irqrestore(&dev->hw_lock, flags);
+	return 0;
+}
+
+/* outside interface: set rec carrier */
+static int ene_set_rec_carrier(void *data, u32 min, u32 max)
+{
+	struct ene_device *dev = (struct ene_device *)data;
+	ene_set_learning_mode(dev,
+		max > ENE_NORMAL_RX_HI || min < ENE_NORMAL_RX_LOW);
+	return 0;
+}
+
+/* outside interface: enable or disable idle mode */
+static void ene_rx_set_idle(void *data, int idle)
+{
+	struct ene_device *dev = (struct ene_device *)data;
+	ene_dbg("%sabling idle mode", idle ? "en" : "dis");
+
+	ene_hw_write_reg_mask(dev, ENE_CIR_SAMPLE_PERIOD,
+		(enable_idle && idle) ? 0 : ENE_CIR_SAMPLE_OVERFLOW,
+			ENE_CIR_SAMPLE_OVERFLOW);
+}
+
+
+/* outside interface: transmit */
+static int ene_transmit(void *data, int *buf, u32 n)
+{
+	struct ene_device *dev = (struct ene_device *)data;
+	unsigned long flags;
+
+	dev->tx_buffer = buf;
+	dev->tx_len = n / sizeof(int);
+	dev->tx_pos = 0;
+	dev->tx_reg = 0;
+	dev->tx_done = 0;
+	dev->tx_sample = 0;
+	dev->tx_sample_pulse = 0;
+
+	ene_dbg("TX: %d samples", dev->tx_len);
+
+	spin_lock_irqsave(&dev->hw_lock, flags);
+
+	ene_tx_hw_set_transmiter_mask(dev);
+	ene_tx_prepare(dev);
+
+	/* Transmit first two samples */
+	ene_tx_sample(dev);
+	ene_tx_sample(dev);
+
+	spin_unlock_irqrestore(&dev->hw_lock, flags);
+
+	if (wait_for_completion_timeout(&dev->tx_complete, 2 * HZ) == 0) {
+		ene_dbg("TX: timeout");
+		spin_lock_irqsave(&dev->hw_lock, flags);
+		ene_tx_complete(dev);
+		spin_unlock_irqrestore(&dev->hw_lock, flags);
+	} else
+		ene_dbg("TX: done");
+	return n;
+}
+
+
+/* probe entry */
+static int ene_probe(struct pnp_dev *pnp_dev, const struct pnp_device_id *id)
+{
+	int error = -ENOMEM;
+	struct ir_dev_props *ir_props;
+	struct input_dev *input_dev;
+	struct ene_device *dev;
+
+	/* allocate memory */
+	input_dev = input_allocate_device();
+	ir_props = kzalloc(sizeof(struct ir_dev_props), GFP_KERNEL);
+	dev = kzalloc(sizeof(struct ene_device), GFP_KERNEL);
+
+	if (!input_dev || !ir_props || !dev)
+		goto error;
+
+	/* validate resources */
+	error = -ENODEV;
+
+	if (!pnp_port_valid(pnp_dev, 0) ||
+	    pnp_port_len(pnp_dev, 0) < ENE_MAX_IO)
+		goto error;
+
+	if (!pnp_irq_valid(pnp_dev, 0))
+		goto error;
+
+	dev->hw_io = pnp_port_start(pnp_dev, 0);
+	dev->irq = pnp_irq(pnp_dev, 0);
+	spin_lock_init(&dev->hw_lock);
+
+	/* claim the resources */
+	error = -EBUSY;
+	if (!request_region(dev->hw_io, ENE_MAX_IO, ENE_DRIVER_NAME))
+		goto error;
+
+	if (request_irq(dev->irq, ene_isr,
+			IRQF_SHARED, ENE_DRIVER_NAME, (void *)dev))
+		goto error;
+
+	pnp_set_drvdata(pnp_dev, dev);
+	dev->pnp_dev = pnp_dev;
+
+	/* detect hardware version and features */
+	error = ene_hw_detect(dev);
+	if (error)
+		goto error;
+
+	ene_setup_settings(dev);
+
+	if (!dev->hw_learning_and_tx_capable && txsim) {
+		dev->hw_learning_and_tx_capable = 1;
+		setup_timer(&dev->tx_sim_timer, ene_tx_irqsim,
+						(long unsigned int)dev);
+		ene_printk(KERN_WARNING,
+			"Simulation of TX activated\n");
+	}
+
+	ir_props->driver_type = RC_DRIVER_IR_RAW;
+	ir_props->allowed_protos = IR_TYPE_ALL;
+	ir_props->priv = dev;
+	ir_props->open = ene_open;
+	ir_props->close = ene_close;
+	ir_props->min_timeout = ENE_MINGAP * 1000;
+	ir_props->max_timeout = ENE_MAXGAP * 1000;
+	ir_props->timeout = ENE_MAXGAP * 1000;
+
+	if (dev->hw_revision == ENE_HW_B)
+		ir_props->s_idle = ene_rx_set_idle;
+
+
+	dev->props = ir_props;
+	dev->idev = input_dev;
+
+	/* don't allow too short/long sample periods */
+	if (sample_period < 5 || sample_period > 0x7F)
+		sample_period = -1;
+
+	/* choose default sample period */
+	if (sample_period == -1) {
+
+		sample_period = 50;
+
+		/* on revB, hardware idle mode eats first sample
+		  if we set too low sample period */
+		if (dev->hw_revision == ENE_HW_B && enable_idle)
+			sample_period = 75;
+	}
+
+	ir_props->rx_resolution = sample_period * 1000;
+
+	if (dev->hw_learning_and_tx_capable) {
+
+		ir_props->s_learning_mode = ene_set_learning_mode;
+
+		if (input == 0)
+			ir_props->s_rx_carrier_range = ene_set_rec_carrier;
+
+		init_completion(&dev->tx_complete);
+		ir_props->tx_ir = ene_transmit;
+		ir_props->s_tx_mask = ene_set_tx_mask;
+		ir_props->s_tx_carrier = ene_set_tx_carrier;
+		ir_props->tx_resolution = ENE_TX_SMPL_PERIOD * 1000;
+		/* ir_props->s_carrier_report = ene_set_carrier_report; */
+	}
+
+
+	device_set_wakeup_capable(&pnp_dev->dev, 1);
+	device_set_wakeup_enable(&pnp_dev->dev, 1);
+
+	if (dev->hw_learning_and_tx_capable)
+		input_dev->name = "ENE eHome Infrared Remote Transceiver";
+	else
+		input_dev->name = "ENE eHome Infrared Remote Receiver";
+
+
+	error = -ENODEV;
+	if (ir_input_register(input_dev, RC_MAP_RC6_MCE, ir_props,
+							ENE_DRIVER_NAME))
+		goto error;
+
+
+	ene_printk(KERN_NOTICE, "driver has been succesfully loaded\n");
+	return 0;
+error:
+	if (dev->irq)
+		free_irq(dev->irq, dev);
+	if (dev->hw_io)
+		release_region(dev->hw_io, ENE_MAX_IO);
+
+	input_free_device(input_dev);
+	kfree(ir_props);
+	kfree(dev);
+	return error;
+}
+
+/* main unload function */
+static void ene_remove(struct pnp_dev *pnp_dev)
+{
+	struct ene_device *dev = pnp_get_drvdata(pnp_dev);
+	unsigned long flags;
+
+	spin_lock_irqsave(&dev->hw_lock, flags);
+	ene_rx_disable(dev);
+	spin_unlock_irqrestore(&dev->hw_lock, flags);
+
+	free_irq(dev->irq, dev);
+	release_region(dev->hw_io, ENE_MAX_IO);
+	ir_input_unregister(dev->idev);
+	kfree(dev->props);
+	kfree(dev);
+}
+
+/* enable wake on IR (wakes on specific button on original remote) */
+static void ene_enable_wake(struct ene_device *dev, int enable)
+{
+	enable = enable && device_may_wakeup(&dev->pnp_dev->dev);
+
+	ene_dbg("wake on IR %s", enable ? "enabled" : "disabled");
+
+	ene_hw_write_reg_mask(dev, ENE_FW1, enable ?
+		ENE_FW1_WAKE : 0, ENE_FW1_WAKE);
+}
+
+#ifdef CONFIG_PM
+static int ene_suspend(struct pnp_dev *pnp_dev, pm_message_t state)
+{
+	struct ene_device *dev = pnp_get_drvdata(pnp_dev);
+	ene_enable_wake(dev, 1);
+	return 0;
+}
+
+static int ene_resume(struct pnp_dev *pnp_dev)
+{
+	struct ene_device *dev = pnp_get_drvdata(pnp_dev);
+	if (dev->in_use)
+		ene_rx_enable(dev);
+
+	ene_enable_wake(dev, 0);
+	return 0;
+}
+#endif
+
+static void ene_shutdown(struct pnp_dev *pnp_dev)
+{
+	struct ene_device *dev = pnp_get_drvdata(pnp_dev);
+	ene_enable_wake(dev, 1);
+}
+
+static const struct pnp_device_id ene_ids[] = {
+	{.id = "ENE0100",},
+	{.id = "ENE0200",},
+	{.id = "ENE0201",},
+	{.id = "ENE0202",},
+	{},
+};
+
+static struct pnp_driver ene_driver = {
+	.name = ENE_DRIVER_NAME,
+	.id_table = ene_ids,
+	.flags = PNP_DRIVER_RES_DO_NOT_CHANGE,
+
+	.probe = ene_probe,
+	.remove = __devexit_p(ene_remove),
+#ifdef CONFIG_PM
+	.suspend = ene_suspend,
+	.resume = ene_resume,
+#endif
+	.shutdown = ene_shutdown,
+};
+
+static int __init ene_init(void)
+{
+	return pnp_register_driver(&ene_driver);
+}
+
+static void ene_exit(void)
+{
+	pnp_unregister_driver(&ene_driver);
+}
+
+module_param(sample_period, int, S_IRUGO);
+MODULE_PARM_DESC(sample_period, "Hardware sample period (50 us default)");
+
+module_param(enable_idle, bool, S_IRUGO | S_IWUSR);
+MODULE_PARM_DESC(enable_idle,
+	"Enables turning off signal sampling after long inactivity time; "
+	"if disabled might help detecting input signal (default: enabled)"
+	" (KB3926B only)");
+
+module_param(input, bool, S_IRUGO);
+MODULE_PARM_DESC(input, "select which input to use "
+	"0 - auto, 1 - standard, 2 - wideband(KB3926C+)");
+
+module_param(debug, int, S_IRUGO | S_IWUSR);
+MODULE_PARM_DESC(debug, "Enable debug (debug=2 verbose debug output)");
+
+module_param(txsim, bool, S_IRUGO);
+MODULE_PARM_DESC(txsim,
+	"Simulate TX features on unsupported hardware (dangerous)");
+
+MODULE_DEVICE_TABLE(pnp, ene_ids);
+MODULE_DESCRIPTION
+	("Infrared input driver for KB3926B/KB3926C/KB3926D "
+	"(aka ENE0100/ENE0200/ENE0201) CIR port");
+
+MODULE_AUTHOR("Maxim Levitsky");
+MODULE_LICENSE("GPL");
+
+module_init(ene_init);
+module_exit(ene_exit);

drivers/media/IR/ene_ir.h

@@ -0,0 +1,235 @@
+/*
+ * driver for ENE KB3926 B/C/D CIR (also known as ENE0XXX)
+ *
+ * Copyright (C) 2010 Maxim Levitsky <maximlevitsky@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307
+ * USA
+ */
+#include <linux/spinlock.h>
+
+
+/* hardware address */
+#define ENE_STATUS		0	/* hardware status - unused */
+#define ENE_ADDR_HI		1	/* hi byte of register address */
+#define ENE_ADDR_LO		2	/* low byte of register address */
+#define ENE_IO			3	/* read/write window */
+#define ENE_MAX_IO		4
+
+/* 8 bytes of samples, divided in 2 halfs*/
+#define ENE_SAMPLE_BUFFER	0xF8F0	/* regular sample buffer */
+#define ENE_SAMPLE_SPC_MASK	0x80	/* sample is space */
+#define ENE_SAMPLE_VALUE_MASK	0x7F
+#define ENE_SAMPLE_OVERFLOW	0x7F
+#define ENE_SAMPLES_SIZE	4
+
+/* fan input sample buffer */
+#define ENE_SAMPLE_BUFFER_FAN	0xF8FB	/* this buffer holds high byte of */
+					/* each sample of normal buffer */
+#define ENE_FAN_SMPL_PULS_MSK	0x8000	/* this bit of combined sample */
+					/* if set, says that sample is pulse */
+#define ENE_FAN_VALUE_MASK	0x0FFF  /* mask for valid bits of the value */
+
+/* first firmware register */
+#define ENE_FW1			0xF8F8
+#define	ENE_FW1_ENABLE		0x01	/* enable fw processing */
+#define ENE_FW1_TXIRQ		0x02	/* TX interrupt pending */
+#define ENE_FW1_WAKE		0x40	/* enable wake from S3 */
+#define ENE_FW1_IRQ		0x80	/* enable interrupt */
+
+/* second firmware register */
+#define ENE_FW2			0xF8F9
+#define ENE_FW2_BUF_HIGH	0x01	/* which half of the buffer to read */
+#define ENE_FW2_IRQ_CLR		0x04	/* clear this on IRQ */
+#define ENE_FW2_GP40_AS_LEARN	0x08	/* normal input is used as */
+					/* learning input */
+#define ENE_FW2_FAN_AS_NRML_IN	0x40	/* fan is used as normal input */
+#define ENE_FW2_LEARNING	0x80	/* hardware supports learning and TX */
+
+/* transmitter ports */
+#define ENE_TX_PORT2		0xFC01	/* this enables one or both */
+#define ENE_TX_PORT2_EN		0x20	/* TX ports */
+#define ENE_TX_PORT1		0xFC08
+#define ENE_TX_PORT1_EN		0x02
+
+/* IRQ registers block (for revision B) */
+#define ENEB_IRQ		0xFD09	/* IRQ number */
+#define ENEB_IRQ_UNK1		0xFD17	/* unknown setting = 1 */
+#define ENEB_IRQ_STATUS		0xFD80	/* irq status */
+#define ENEB_IRQ_STATUS_IR	0x20	/* IR irq */
+
+/* fan as input settings - only if learning capable */
+#define ENE_FAN_AS_IN1		0xFE30  /* fan init reg 1 */
+#define ENE_FAN_AS_IN1_EN	0xCD
+#define ENE_FAN_AS_IN2		0xFE31  /* fan init reg 2 */
+#define ENE_FAN_AS_IN2_EN	0x03
+#define ENE_SAMPLE_PERIOD_FAN   61	/* fan input has fixed sample period */
+
+/* IRQ registers block (for revision C,D) */
+#define ENEC_IRQ		0xFE9B	/* new irq settings register */
+#define ENEC_IRQ_MASK		0x0F	/* irq number mask */
+#define ENEC_IRQ_UNK_EN		0x10	/* always enabled */
+#define ENEC_IRQ_STATUS		0x20	/* irq status and ACK */
+
+/* CIR block settings */
+#define ENE_CIR_CONF1		0xFEC0
+#define ENE_CIR_CONF1_TX_CLEAR	0x01	/* clear that on revC */
+					/* while transmitting */
+#define ENE_CIR_CONF1_RX_ON	0x07	/* normal receiver enabled */
+#define ENE_CIR_CONF1_LEARN1	0x08	/* enabled on learning mode */
+#define ENE_CIR_CONF1_TX_ON	0x30	/* enabled on transmit */
+#define ENE_CIR_CONF1_TX_CARR	0x80	/* send TX carrier or not */
+
+#define ENE_CIR_CONF2		0xFEC1	/* unknown setting = 0 */
+#define ENE_CIR_CONF2_LEARN2	0x10	/* set on enable learning */
+#define ENE_CIR_CONF2_GPIO40DIS	0x20	/* disable input via gpio40 */
+
+#define ENE_CIR_SAMPLE_PERIOD	0xFEC8	/* sample period in us */
+#define ENE_CIR_SAMPLE_OVERFLOW	0x80	/* interrupt on overflows if set */
+
+
+/* Two byte tx buffer */
+#define ENE_TX_INPUT1		0xFEC9
+#define ENE_TX_INPUT2		0xFECA
+#define ENE_TX_PULSE_MASK	0x80	/* Transmitted sample is pulse */
+#define ENE_TX_SMLP_MASK	0x7F
+#define ENE_TX_SMPL_PERIOD	50	/* transmit sample period - fixed */
+
+
+/* Unknown TX setting - TX sample period ??? */
+#define ENE_TX_UNK1		0xFECB	/* set to 0x63 */
+
+/* Current received carrier period */
+#define ENE_RX_CARRIER		0xFECC	/* RX period (500 ns) */
+#define ENE_RX_CARRIER_VALID	0x80	/* Register content valid */
+
+
+/* TX period (1/carrier) */
+#define ENE_TX_PERIOD		0xFECE	/* TX period (500 ns) */
+#define ENE_TX_PERIOD_UNKBIT	0x80	/* This bit set on transmit*/
+#define ENE_TX_PERIOD_PULSE	0xFECF	/* TX pulse period (500 ns)*/
+
+/* Hardware versions */
+#define ENE_HW_VERSION		0xFF00	/* hardware revision */
+#define ENE_PLLFRH		0xFF16
+#define ENE_PLLFRL		0xFF17
+
+#define ENE_HW_UNK		0xFF1D
+#define ENE_HW_UNK_CLR		0x04
+#define ENE_HW_VER_MAJOR	0xFF1E	/* chip version */
+#define ENE_HW_VER_MINOR	0xFF1F
+#define ENE_HW_VER_OLD		0xFD00
+
+/* Normal/Learning carrier ranges - only valid if we have learning input*/
+/* TODO: test */
+#define ENE_NORMAL_RX_LOW	34
+#define ENE_NORMAL_RX_HI	38
+
+/* Tx carrier range */
+/* Hardware might be able to do more, but this range is enough for
+   all purposes */
+#define ENE_TX_PERIOD_MAX	32	/* corresponds to 29.4 kHz */
+#define ENE_TX_PERIOD_MIN	16	/* corrsponds to 62.5 kHz */
+
+
+
+/* Minimal and maximal gaps */
+
+/* Normal case:
+	Minimal gap is 0x7F * sample period
+	Maximum gap depends on hardware.
+	For KB3926B, it is unlimited, for newer models its around
+	250000, after which HW stops sending samples, and that is
+	not possible to change */
+
+/* Fan case:
+	Both minimal and maximal gaps are same, and equal to 0xFFF * 0x61
+	And there is nothing to change this setting
+*/
+
+#define ENE_MAXGAP		250000
+#define ENE_MINGAP		(127 * sample_period)
+
+/******************************************************************************/
+
+#define ENE_DRIVER_NAME		"ene_ir"
+
+#define ENE_IRQ_RX		1
+#define ENE_IRQ_TX		2
+
+#define  ENE_HW_B		1	/* 3926B */
+#define  ENE_HW_C		2	/* 3926C */
+#define  ENE_HW_D		3	/* 3926D */
+
+#define ene_printk(level, text, ...) \
+	printk(level ENE_DRIVER_NAME ": " text, ## __VA_ARGS__)
+
+#define ene_dbg(text, ...) \
+	if (debug) \
+		printk(KERN_DEBUG \
+			ENE_DRIVER_NAME ": " text "\n" , ## __VA_ARGS__)
+
+#define ene_dbg_verbose(text, ...) \
+	if (debug > 1) \
+		printk(KERN_DEBUG \
+			ENE_DRIVER_NAME ": " text "\n" , ## __VA_ARGS__)
+
+
+struct ene_device {
+	struct pnp_dev *pnp_dev;
+	struct input_dev *idev;
+	struct ir_dev_props *props;
+	int in_use;
+
+	/* hw IO settings */
+	unsigned long hw_io;
+	int irq;
+	spinlock_t hw_lock;
+
+	/* HW features */
+	int hw_revision;			/* hardware revision */
+	bool hw_learning_and_tx_capable;	/* learning capable */
+	bool hw_gpio40_learning;		/* gpio40 is learning */
+	bool hw_fan_as_normal_input;		/* fan input is used as */
+						/* regular input */
+	/* HW state*/
+	int rx_pointer;				/* hw pointer to rx buffer */
+	bool rx_fan_input_inuse;		/* is fan input in use for rx*/
+	int tx_reg;				/* current reg used for TX */
+	u8  saved_conf1;			/* saved FEC0 reg */
+
+	/* TX sample handling */
+	unsigned int tx_sample;			/* current sample for TX */
+	bool tx_sample_pulse;			/* current sample is pulse */
+
+	/* TX buffer */
+	int *tx_buffer;				/* input samples buffer*/
+	int tx_pos;				/* position in that bufer */
+	int tx_len;				/* current len of tx buffer */
+	int tx_done;				/* done transmitting */
+						/* one more sample pending*/
+	struct completion tx_complete;		/* TX completion */
+	struct timer_list tx_sim_timer;
+
+	/* TX settings */
+	int tx_period;
+	int tx_duty_cycle;
+	int transmitter_mask;
+
+	/* RX settings */
+	bool learning_enabled;			/* learning input enabled */
+	bool carrier_detect_enabled;		/* carrier detect enabled */
+	int rx_period_adjust;
+};

drivers/media/IR/imon.c

@@ -87,7 +87,6 @@ static ssize_t lcd_write(struct file *file, const char *buf,
 struct imon_context {
 	struct device *dev;
 	struct ir_dev_props *props;
-	struct ir_input_dev *ir;
 	/* Newer devices have two interfaces */
 	struct usb_device *usbdev_intf0;
 	struct usb_device *usbdev_intf1;
@@ -1656,7 +1655,6 @@ static struct input_dev *imon_init_idev(struct imon_context *ictx)
 {
 	struct input_dev *idev;
 	struct ir_dev_props *props;
-	struct ir_input_dev *ir;
 	int ret, i;
 
 	idev = input_allocate_device();
@@ -1671,12 +1669,6 @@ static struct input_dev *imon_init_idev(struct imon_context *ictx)
 		goto props_alloc_failed;
 	}
 
-	ir = kzalloc(sizeof(struct ir_input_dev), GFP_KERNEL);
-	if (!ir) {
-		dev_err(ictx->dev, "remote ir input dev allocation failed\n");
-		goto ir_dev_alloc_failed;
-	}
-
 	snprintf(ictx->name_idev, sizeof(ictx->name_idev),
 		 "iMON Remote (%04x:%04x)", ictx->vendor, ictx->product);
 	idev->name = ictx->name_idev;
@@ -1706,14 +1698,9 @@ static struct input_dev *imon_init_idev(struct imon_context *ictx)
 	props->change_protocol = imon_ir_change_protocol;
 	ictx->props = props;
 
-	ictx->ir = ir;
-	memcpy(&ir->dev, ictx->dev, sizeof(struct device));
-
 	usb_to_input_id(ictx->usbdev_intf0, &idev->id);
 	idev->dev.parent = ictx->dev;
 
-	input_set_drvdata(idev, ir);
-
 	ret = ir_input_register(idev, RC_MAP_IMON_PAD, props, MOD_NAME);
 	if (ret < 0) {
 		dev_err(ictx->dev, "remote input dev register failed\n");
@@ -1723,8 +1710,6 @@ static struct input_dev *imon_init_idev(struct imon_context *ictx)
 	return idev;
 
 idev_register_failed:
-	kfree(ir);
-ir_dev_alloc_failed:
 	kfree(props);
 props_alloc_failed:
 	input_free_device(idev);
@@ -1944,7 +1929,6 @@ static struct imon_context *imon_init_intf0(struct usb_interface *intf)
 
 urb_submit_failed:
 	ir_input_unregister(ictx->idev);
-	input_free_device(ictx->idev);
 idev_setup_failed:
 find_endpoint_failed:
 	mutex_unlock(&ictx->lock);
@@ -2014,10 +1998,8 @@ static struct imon_context *imon_init_intf1(struct usb_interface *intf,
 	return ictx;
 
 urb_submit_failed:
-	if (ictx->touch) {
+	if (ictx->touch)
 		input_unregister_device(ictx->touch);
-		input_free_device(ictx->touch);
-	}
 touch_setup_failed:
 find_endpoint_failed:
 	mutex_unlock(&ictx->lock);

drivers/media/IR/ir-core-priv.h

@@ -32,7 +32,7 @@ struct ir_raw_handler {
 
 struct ir_raw_event_ctrl {
 	struct list_head		list;		/* to keep track of raw clients */
-	struct work_struct		rx_work;	/* for the rx decoding workqueue */
+	struct task_struct		*thread;
 	struct kfifo			kfifo;		/* fifo for the pulse/space durations */
 	ktime_t				last_event;	/* when last event occurred */
 	enum raw_event_type		last_type;	/* last event type */
@@ -41,10 +41,13 @@ struct ir_raw_event_ctrl {
 
 	/* raw decoder state follows */
 	struct ir_raw_event prev_ev;
+	struct ir_raw_event this_ev;
 	struct nec_dec {
 		int state;
 		unsigned count;
 		u32 bits;
+		bool is_nec_x;
+		bool necx_repeat;
 	} nec;
 	struct rc5_dec {
 		int state;
@@ -76,7 +79,7 @@ struct ir_raw_event_ctrl {
 	struct lirc_codec {
 		struct ir_input_dev *ir_dev;
 		struct lirc_driver *drv;
-		int lircdata;
+		int carrier_low;
 	} lirc;
 };
 
@@ -104,10 +107,9 @@ static inline void decrease_duration(struct ir_raw_event *ev, unsigned duration)
 		ev->duration -= duration;
 }
 
-#define TO_US(duration)			(((duration) + 500) / 1000)
+#define TO_US(duration)			DIV_ROUND_CLOSEST((duration), 1000)
 #define TO_STR(is_pulse)		((is_pulse) ? "pulse" : "space")
 #define IS_RESET(ev)			(ev.duration == 0)
-
 /*
  * Routines from ir-sysfs.c - Meant to be called only internally inside
  * ir-core
@@ -126,7 +128,8 @@ int ir_raw_handler_register(struct ir_raw_handler *ir_raw_handler);
 void ir_raw_handler_unregister(struct ir_raw_handler *ir_raw_handler);
 void ir_raw_init(void);
 
-
+int ir_rcmap_init(void);
+void ir_rcmap_cleanup(void);
 /*
  * Decoder initialization code
  *

drivers/media/IR/ir-jvc-decoder.c

@@ -32,6 +32,7 @@ enum jvc_state {
 	STATE_BIT_SPACE,
 	STATE_TRAILER_PULSE,
 	STATE_TRAILER_SPACE,
+	STATE_CHECK_REPEAT,
 };
 
 /**
@@ -60,6 +61,7 @@ static int ir_jvc_decode(struct input_dev *input_dev, struct ir_raw_event ev)
 	IR_dprintk(2, "JVC decode started at state %d (%uus %s)\n",
 		   data->state, TO_US(ev.duration), TO_STR(ev.pulse));
 
+again:
 	switch (data->state) {
 
 	case STATE_INACTIVE:
@@ -149,8 +151,18 @@ static int ir_jvc_decode(struct input_dev *input_dev, struct ir_raw_event ev)
 		}
 
 		data->count = 0;
-		data->state = STATE_BIT_PULSE;
+		data->state = STATE_CHECK_REPEAT;
 		return 0;
+
+	case STATE_CHECK_REPEAT:
+		if (!ev.pulse)
+			break;
+
+		if (eq_margin(ev.duration, JVC_HEADER_PULSE, JVC_UNIT / 2))
+			data->state = STATE_INACTIVE;
+  else
+			data->state = STATE_BIT_PULSE;
+		goto again;
 	}
 
 out:

drivers/media/IR/ir-keytable.c

@@ -339,6 +339,8 @@ void ir_repeat(struct input_dev *dev)
 
 	spin_lock_irqsave(&ir->keylock, flags);
 
+	input_event(dev, EV_MSC, MSC_SCAN, ir->last_scancode);
+
 	if (!ir->keypressed)
 		goto out;
 
@@ -370,6 +372,8 @@ void ir_keydown(struct input_dev *dev, int scancode, u8 toggle)
 
 	spin_lock_irqsave(&ir->keylock, flags);
 
+	input_event(dev, EV_MSC, MSC_SCAN, scancode);
+
 	/* Repeat event? */
 	if (ir->keypressed &&
 	    ir->last_scancode == scancode &&
@@ -383,9 +387,11 @@ void ir_keydown(struct input_dev *dev, int scancode, u8 toggle)
 	ir->last_toggle = toggle;
 	ir->last_keycode = keycode;
 
+
 	if (keycode == KEY_RESERVED)
 		goto out;
 
+
 	/* Register a keypress */
 	ir->keypressed = true;
 	IR_dprintk(1, "%s: key down event, key 0x%04x, scancode 0x%04x\n",
@@ -428,7 +434,7 @@ static void ir_close(struct input_dev *input_dev)
  */
 int __ir_input_register(struct input_dev *input_dev,
 		      const struct ir_scancode_table *rc_tab,
-		      const struct ir_dev_props *props,
+		      struct ir_dev_props *props,
 		      const char *driver_name)
 {
 	struct ir_input_dev *ir_dev;
@@ -480,6 +486,8 @@ int __ir_input_register(struct input_dev *input_dev,
 
 	set_bit(EV_KEY, input_dev->evbit);
 	set_bit(EV_REP, input_dev->evbit);
+	set_bit(EV_MSC, input_dev->evbit);
+	set_bit(MSC_SCAN, input_dev->mscbit);
 
 	if (ir_setkeytable(input_dev, &ir_dev->rc_tab, rc_tab)) {
 		rc = -ENOMEM;
@@ -499,7 +507,8 @@ int __ir_input_register(struct input_dev *input_dev,
 
 	IR_dprintk(1, "Registered input device on %s for %s remote%s.\n",
 		   driver_name, rc_tab->name,
-		   ir_dev->props->driver_type == RC_DRIVER_IR_RAW ? " in raw mode" : "");
+		   (ir_dev->props && ir_dev->props->driver_type == RC_DRIVER_IR_RAW) ?
+			" in raw mode" : "");
 
 	return 0;
 

drivers/media/IR/ir-lirc-codec.c

@@ -32,6 +32,7 @@
 static int ir_lirc_decode(struct input_dev *input_dev, struct ir_raw_event ev)
 {
 	struct ir_input_dev *ir_dev = input_get_drvdata(input_dev);
+	int sample;
 
 	if (!(ir_dev->raw->enabled_protocols & IR_TYPE_LIRC))
 		return 0;
@@ -39,18 +40,20 @@ static int ir_lirc_decode(struct input_dev *input_dev, struct ir_raw_event ev)
 	if (!ir_dev->raw->lirc.drv || !ir_dev->raw->lirc.drv->rbuf)
 		return -EINVAL;
 
+	if (IS_RESET(ev))
+		return 0;
+
 	IR_dprintk(2, "LIRC data transfer started (%uus %s)\n",
 		   TO_US(ev.duration), TO_STR(ev.pulse));
 
-	ir_dev->raw->lirc.lircdata += ev.duration / 1000;
+	sample = ev.duration / 1000;
 	if (ev.pulse)
-		ir_dev->raw->lirc.lircdata |= PULSE_BIT;
+		sample |= PULSE_BIT;
 
 	lirc_buffer_write(ir_dev->raw->lirc.drv->rbuf,
-			  (unsigned char *) &ir_dev->raw->lirc.lircdata);
+			  (unsigned char *) &sample);
 	wake_up(&ir_dev->raw->lirc.drv->rbuf->wait_poll);
 
-	ir_dev->raw->lirc.lircdata = 0;
 
 	return 0;
 }
@@ -92,13 +95,14 @@ out:
 	return ret;
 }
 
-static long ir_lirc_ioctl(struct file *filep, unsigned int cmd, unsigned long arg)
+static long ir_lirc_ioctl(struct file *filep, unsigned int cmd,
+			unsigned long __user arg)
 {
 	struct lirc_codec *lirc;
 	struct ir_input_dev *ir_dev;
 	int ret = 0;
 	void *drv_data;
-	unsigned long val;
+	unsigned long val = 0;
 
 	lirc = lirc_get_pdata(filep);
 	if (!lirc)
@@ -110,47 +114,106 @@ static long ir_lirc_ioctl(struct file *filep, unsigned int cmd, unsigned long ar
 
 	drv_data = ir_dev->props->priv;
 
-	switch (cmd) {
-	case LIRC_SET_TRANSMITTER_MASK:
+	if (_IOC_DIR(cmd) & _IOC_WRITE) {
 		ret = get_user(val, (unsigned long *)arg);
 		if (ret)
 			return ret;
+	}
+
+	switch (cmd) {
 
-		if (ir_dev->props && ir_dev->props->s_tx_mask)
+	/* legacy support */
+	case LIRC_GET_SEND_MODE:
+		val = LIRC_CAN_SEND_PULSE & LIRC_CAN_SEND_MASK;
+		break;
+
+	case LIRC_SET_SEND_MODE:
+		if (val != (LIRC_MODE_PULSE & LIRC_CAN_SEND_MASK))
+			return -EINVAL;
+		break;
+
+	/* TX settings */
+	case LIRC_SET_TRANSMITTER_MASK:
+		if (ir_dev->props->s_tx_mask)
 			ret = ir_dev->props->s_tx_mask(drv_data, (u32)val);
 		else
 			return -EINVAL;
 		break;
 
 	case LIRC_SET_SEND_CARRIER:
-		ret = get_user(val, (unsigned long *)arg);
-		if (ret)
-			return ret;
-
-		if (ir_dev->props && ir_dev->props->s_tx_carrier)
+		if (ir_dev->props->s_tx_carrier)
 			ir_dev->props->s_tx_carrier(drv_data, (u32)val);
 		else
 			return -EINVAL;
 		break;
 
-	case LIRC_GET_SEND_MODE:
-		val = LIRC_CAN_SEND_PULSE & LIRC_CAN_SEND_MASK;
-		ret = put_user(val, (unsigned long *)arg);
+	case LIRC_SET_SEND_DUTY_CYCLE:
+		if (!ir_dev->props->s_tx_duty_cycle)
+			return -ENOSYS;
+
+		if (val <= 0 || val >= 100)
+			return -EINVAL;
+
+		ir_dev->props->s_tx_duty_cycle(ir_dev->props->priv, val);
 		break;
 
-	case LIRC_SET_SEND_MODE:
-		ret = get_user(val, (unsigned long *)arg);
-		if (ret)
-			return ret;
+	/* RX settings */
+	case LIRC_SET_REC_CARRIER:
+		if (ir_dev->props->s_rx_carrier_range)
+			ret = ir_dev->props->s_rx_carrier_range(
+				ir_dev->props->priv,
+				ir_dev->raw->lirc.carrier_low, val);
+		else
+			return -ENOSYS;
 
-		if (val != (LIRC_MODE_PULSE & LIRC_CAN_SEND_MASK))
+		if (!ret)
+			ir_dev->raw->lirc.carrier_low = 0;
+		break;
+
+	case LIRC_SET_REC_CARRIER_RANGE:
+		if (val >= 0)
+			ir_dev->raw->lirc.carrier_low = val;
+		break;
+
+
+	case LIRC_GET_REC_RESOLUTION:
+		val = ir_dev->props->rx_resolution;
+		break;
+
+	case LIRC_SET_WIDEBAND_RECEIVER:
+		if (ir_dev->props->s_learning_mode)
+			return ir_dev->props->s_learning_mode(
+				ir_dev->props->priv, !!val);
+		else
+			return -ENOSYS;
+
+	/* Generic timeout support */
+	case LIRC_GET_MIN_TIMEOUT:
+		if (!ir_dev->props->max_timeout)
+			return -ENOSYS;
+		val = ir_dev->props->min_timeout / 1000;
+		break;
+
+	case LIRC_GET_MAX_TIMEOUT:
+		if (!ir_dev->props->max_timeout)
+			return -ENOSYS;
+		val = ir_dev->props->max_timeout / 1000;
+		break;
+
+	case LIRC_SET_REC_TIMEOUT:
+		if (val < ir_dev->props->min_timeout ||
+		    val > ir_dev->props->max_timeout)
 			return -EINVAL;
+		ir_dev->props->timeout = val * 1000;
 		break;
 
 	default:
 		return lirc_dev_fop_ioctl(filep, cmd, arg);
 	}
 
+	if (_IOC_DIR(cmd) & _IOC_READ)
+		ret = put_user(val, (unsigned long *)arg);
+
 	return ret;
 }
 
@@ -196,13 +259,28 @@ static int ir_lirc_register(struct input_dev *input_dev)
 
 	features = LIRC_CAN_REC_MODE2;
 	if (ir_dev->props->tx_ir) {
+
 		features |= LIRC_CAN_SEND_PULSE;
 		if (ir_dev->props->s_tx_mask)
 			features |= LIRC_CAN_SET_TRANSMITTER_MASK;
 		if (ir_dev->props->s_tx_carrier)
 			features |= LIRC_CAN_SET_SEND_CARRIER;
+
+		if (ir_dev->props->s_tx_duty_cycle)
+			features |= LIRC_CAN_SET_REC_DUTY_CYCLE;
 	}
 
+	if (ir_dev->props->s_rx_carrier_range)
+		features |= LIRC_CAN_SET_REC_CARRIER |
+			LIRC_CAN_SET_REC_CARRIER_RANGE;
+
+	if (ir_dev->props->s_learning_mode)
+		features |= LIRC_CAN_USE_WIDEBAND_RECEIVER;
+
+	if (ir_dev->props->max_timeout)
+		features |= LIRC_CAN_SET_REC_TIMEOUT;
+
+
 	snprintf(drv->name, sizeof(drv->name), "ir-lirc-codec (%s)",
 		 ir_dev->driver_name);
 	drv->minor = -1;
@@ -224,8 +302,6 @@ static int ir_lirc_register(struct input_dev *input_dev)
 
 	ir_dev->raw->lirc.drv = drv;
 	ir_dev->raw->lirc.ir_dev = ir_dev;
-	ir_dev->raw->lirc.lircdata = PULSE_MASK;
-
 	return 0;
 
 lirc_register_failed:

drivers/media/IR/ir-nec-decoder.c

@@ -20,12 +20,13 @@
 #define NEC_HEADER_PULSE	(16 * NEC_UNIT)
 #define NECX_HEADER_PULSE	(8  * NEC_UNIT) /* Less common NEC variant */
 #define NEC_HEADER_SPACE	(8  * NEC_UNIT)
-#define NEC_REPEAT_SPACE	(8  * NEC_UNIT)
+#define NEC_REPEAT_SPACE	(4  * NEC_UNIT)
 #define NEC_BIT_PULSE		(1  * NEC_UNIT)
 #define NEC_BIT_0_SPACE		(1  * NEC_UNIT)
 #define NEC_BIT_1_SPACE		(3  * NEC_UNIT)
 #define	NEC_TRAILER_PULSE	(1  * NEC_UNIT)
 #define	NEC_TRAILER_SPACE	(10 * NEC_UNIT) /* even longer in reality */
+#define NECX_REPEAT_BITS	1
 
 enum nec_state {
 	STATE_INACTIVE,
@@ -67,8 +68,12 @@ static int ir_nec_decode(struct input_dev *input_dev, struct ir_raw_event ev)
 		if (!ev.pulse)
 			break;
 
-		if (!eq_margin(ev.duration, NEC_HEADER_PULSE, NEC_UNIT / 2) &&
-		    !eq_margin(ev.duration, NECX_HEADER_PULSE, NEC_UNIT / 2))
+		if (eq_margin(ev.duration, NEC_HEADER_PULSE, NEC_UNIT / 2)) {
+			data->is_nec_x = false;
+			data->necx_repeat = false;
+		} else if (eq_margin(ev.duration, NECX_HEADER_PULSE, NEC_UNIT / 2))
+			data->is_nec_x = true;
+		else
 			break;
 
 		data->count = 0;
@@ -105,6 +110,17 @@ static int ir_nec_decode(struct input_dev *input_dev, struct ir_raw_event ev)
 		if (ev.pulse)
 			break;
 
+		if (data->necx_repeat && data->count == NECX_REPEAT_BITS &&
+			geq_margin(ev.duration,
+			NEC_TRAILER_SPACE, NEC_UNIT / 2)) {
+				IR_dprintk(1, "Repeat last key\n");
+				ir_repeat(input_dev);
+				data->state = STATE_INACTIVE;
+				return 0;
+
+		} else if (data->count > NECX_REPEAT_BITS)
+			data->necx_repeat = false;
+
 		data->bits <<= 1;
 		if (eq_margin(ev.duration, NEC_BIT_1_SPACE, NEC_UNIT / 2))
 			data->bits |= 1;
@@ -159,6 +175,9 @@ static int ir_nec_decode(struct input_dev *input_dev, struct ir_raw_event ev)
 			IR_dprintk(1, "NEC scancode 0x%04x\n", scancode);
 		}
 
+		if (data->is_nec_x)
+			data->necx_repeat = true;
+
 		ir_keydown(input_dev, scancode, 0);
 		data->state = STATE_INACTIVE;
 		return 0;

drivers/media/IR/ir-raw-event.c

@@ -12,9 +12,10 @@
  *  GNU General Public License for more details.
  */
 
-#include <linux/workqueue.h>
-#include <linux/spinlock.h>
+#include <linux/kthread.h>
+#include <linux/mutex.h>
 #include <linux/sched.h>
+#include <linux/freezer.h>
 #include "ir-core-priv.h"
 
 /* Define the max number of pulse/space transitions to buffer */
@@ -24,7 +25,7 @@
 static LIST_HEAD(ir_raw_client_list);
 
 /* Used to handle IR raw handler extensions */
-static DEFINE_SPINLOCK(ir_raw_handler_lock);
+static DEFINE_MUTEX(ir_raw_handler_lock);
 static LIST_HEAD(ir_raw_handler_list);
 static u64 available_protocols;
 
@@ -33,20 +34,30 @@ static u64 available_protocols;
 static struct work_struct wq_load;
 #endif
 
-static void ir_raw_event_work(struct work_struct *work)
+static int ir_raw_event_thread(void *data)
 {
 	struct ir_raw_event ev;
 	struct ir_raw_handler *handler;
-	struct ir_raw_event_ctrl *raw =
-		container_of(work, struct ir_raw_event_ctrl, rx_work);
-
-	while (kfifo_out(&raw->kfifo, &ev, sizeof(ev)) == sizeof(ev)) {
-		spin_lock(&ir_raw_handler_lock);
-		list_for_each_entry(handler, &ir_raw_handler_list, list)
-			handler->decode(raw->input_dev, ev);
-		spin_unlock(&ir_raw_handler_lock);
-		raw->prev_ev = ev;
+	struct ir_raw_event_ctrl *raw = (struct ir_raw_event_ctrl *)data;
+
+	while (!kthread_should_stop()) {
+		try_to_freeze();
+
+		mutex_lock(&ir_raw_handler_lock);
+
+		while (kfifo_out(&raw->kfifo, &ev, sizeof(ev)) == sizeof(ev)) {
+			list_for_each_entry(handler, &ir_raw_handler_list, list)
+				handler->decode(raw->input_dev, ev);
+			raw->prev_ev = ev;
+		}
+
+		mutex_unlock(&ir_raw_handler_lock);
+
+		set_current_state(TASK_INTERRUPTIBLE);
+		schedule();
 	}
+
+	return 0;
 }
 
 /**
@@ -66,6 +77,9 @@ int ir_raw_event_store(struct input_dev *input_dev, struct ir_raw_event *ev)
 	if (!ir->raw)
 		return -EINVAL;
 
+	IR_dprintk(2, "sample: (05%dus %s)\n",
+		TO_US(ev->duration), TO_STR(ev->pulse));
+
 	if (kfifo_in(&ir->raw->kfifo, ev, sizeof(*ev)) != sizeof(*ev))
 		return -ENOMEM;
 
@@ -125,6 +139,90 @@ int ir_raw_event_store_edge(struct input_dev *input_dev, enum raw_event_type typ
 }
 EXPORT_SYMBOL_GPL(ir_raw_event_store_edge);
 
+/**
+ * ir_raw_event_store_with_filter() - pass next pulse/space to decoders with some processing
+ * @input_dev:	the struct input_dev device descriptor
+ * @type:	the type of the event that has occurred
+ *
+ * This routine (which may be called from an interrupt context) works
+ * in similiar manner to ir_raw_event_store_edge.
+ * This routine is intended for devices with limited internal buffer
+ * It automerges samples of same type, and handles timeouts
+ */
+int ir_raw_event_store_with_filter(struct input_dev *input_dev,
+						struct ir_raw_event *ev)
+{
+	struct ir_input_dev *ir = input_get_drvdata(input_dev);
+	struct ir_raw_event_ctrl *raw = ir->raw;
+
+	if (!raw || !ir->props)
+		return -EINVAL;
+
+	/* Ignore spaces in idle mode */
+	if (ir->idle && !ev->pulse)
+		return 0;
+	else if (ir->idle)
+		ir_raw_event_set_idle(input_dev, 0);
+
+	if (!raw->this_ev.duration) {
+		raw->this_ev = *ev;
+	} else if (ev->pulse == raw->this_ev.pulse) {
+		raw->this_ev.duration += ev->duration;
+	} else {
+		ir_raw_event_store(input_dev, &raw->this_ev);
+		raw->this_ev = *ev;
+	}
+
+	/* Enter idle mode if nessesary */
+	if (!ev->pulse && ir->props->timeout &&
+		raw->this_ev.duration >= ir->props->timeout)
+		ir_raw_event_set_idle(input_dev, 1);
+	return 0;
+}
+EXPORT_SYMBOL_GPL(ir_raw_event_store_with_filter);
+
+void ir_raw_event_set_idle(struct input_dev *input_dev, int idle)
+{
+	struct ir_input_dev *ir = input_get_drvdata(input_dev);
+	struct ir_raw_event_ctrl *raw = ir->raw;
+	ktime_t now;
+	u64 delta;
+
+	if (!ir->props)
+		return;
+
+	if (!ir->raw)
+		goto out;
+
+	if (idle) {
+		IR_dprintk(2, "enter idle mode\n");
+		raw->last_event = ktime_get();
+	} else {
+		IR_dprintk(2, "exit idle mode\n");
+
+		now = ktime_get();
+		delta = ktime_to_ns(ktime_sub(now, ir->raw->last_event));
+
+		WARN_ON(raw->this_ev.pulse);
+
+		raw->this_ev.duration =
+			min(raw->this_ev.duration + delta,
+						(u64)IR_MAX_DURATION);
+
+		ir_raw_event_store(input_dev, &raw->this_ev);
+
+		if (raw->this_ev.duration == IR_MAX_DURATION)
+			ir_raw_event_reset(input_dev);
+
+		raw->this_ev.duration = 0;
+	}
+out:
+	if (ir->props->s_idle)
+		ir->props->s_idle(ir->props->priv, idle);
+	ir->idle = idle;
+}
+EXPORT_SYMBOL_GPL(ir_raw_event_set_idle);
+
 /**
  * ir_raw_event_handle() - schedules the decoding of stored ir data
  * @input_dev:	the struct input_dev device descriptor
@@ -138,7 +236,7 @@ void ir_raw_event_handle(struct input_dev *input_dev)
 	if (!ir->raw)
 		return;
 
-	schedule_work(&ir->raw->rx_work);
+	wake_up_process(ir->raw->thread);
 }
 EXPORT_SYMBOL_GPL(ir_raw_event_handle);
 
@@ -147,9 +245,9 @@ u64
 ir_raw_get_allowed_protocols()
 {
 	u64 protocols;
-	spin_lock(&ir_raw_handler_lock);
+	mutex_lock(&ir_raw_handler_lock);
 	protocols = available_protocols;
-	spin_unlock(&ir_raw_handler_lock);
+	mutex_unlock(&ir_raw_handler_lock);
 	return protocols;
 }
 
@@ -167,7 +265,7 @@ int ir_raw_event_register(struct input_dev *input_dev)
 		return -ENOMEM;
 
 	ir->raw->input_dev = input_dev;
-	INIT_WORK(&ir->raw->rx_work, ir_raw_event_work);
+
 	ir->raw->enabled_protocols = ~0;
 	rc = kfifo_alloc(&ir->raw->kfifo, sizeof(s64) * MAX_IR_EVENT_SIZE,
 			 GFP_KERNEL);
@@ -177,12 +275,21 @@ int ir_raw_event_register(struct input_dev *input_dev)
 		return rc;
 	}
 
-	spin_lock(&ir_raw_handler_lock);
+	ir->raw->thread = kthread_run(ir_raw_event_thread, ir->raw,
+			"rc%u",  (unsigned int)ir->devno);
+
+	if (IS_ERR(ir->raw->thread)) {
+		kfree(ir->raw);
+		ir->raw = NULL;
+		return PTR_ERR(ir->raw->thread);
+	}
+
+	mutex_lock(&ir_raw_handler_lock);
 	list_add_tail(&ir->raw->list, &ir_raw_client_list);
 	list_for_each_entry(handler, &ir_raw_handler_list, list)
 		if (handler->raw_register)
 			handler->raw_register(ir->raw->input_dev);
-	spin_unlock(&ir_raw_handler_lock);
+	mutex_unlock(&ir_raw_handler_lock);
 
 	return 0;
 }
@@ -195,14 +302,14 @@ void ir_raw_event_unregister(struct input_dev *input_dev)
 	if (!ir->raw)
 		return;
 
-	cancel_work_sync(&ir->raw->rx_work);
+	kthread_stop(ir->raw->thread);
 
-	spin_lock(&ir_raw_handler_lock);
+	mutex_lock(&ir_raw_handler_lock);
 	list_del(&ir->raw->list);
 	list_for_each_entry(handler, &ir_raw_handler_list, list)
 		if (handler->raw_unregister)
 			handler->raw_unregister(ir->raw->input_dev);
-	spin_unlock(&ir_raw_handler_lock);
+	mutex_unlock(&ir_raw_handler_lock);
 
 	kfifo_free(&ir->raw->kfifo);
 	kfree(ir->raw);
@@ -217,13 +324,13 @@ int ir_raw_handler_register(struct ir_raw_handler *ir_raw_handler)
 {
 	struct ir_raw_event_ctrl *raw;
 
-	spin_lock(&ir_raw_handler_lock);
+	mutex_lock(&ir_raw_handler_lock);
 	list_add_tail(&ir_raw_handler->list, &ir_raw_handler_list);
 	if (ir_raw_handler->raw_register)
 		list_for_each_entry(raw, &ir_raw_client_list, list)
 			ir_raw_handler->raw_register(raw->input_dev);
 	available_protocols |= ir_raw_handler->protocols;
-	spin_unlock(&ir_raw_handler_lock);
+	mutex_unlock(&ir_raw_handler_lock);
 
 	return 0;
 }
@@ -233,13 +340,13 @@ void ir_raw_handler_unregister(struct ir_raw_handler *ir_raw_handler)
 {
 	struct ir_raw_event_ctrl *raw;
 
-	spin_lock(&ir_raw_handler_lock);
+	mutex_lock(&ir_raw_handler_lock);
 	list_del(&ir_raw_handler->list);
 	if (ir_raw_handler->raw_unregister)
 		list_for_each_entry(raw, &ir_raw_client_list, list)
 			ir_raw_handler->raw_unregister(raw->input_dev);
 	available_protocols &= ~ir_raw_handler->protocols;
-	spin_unlock(&ir_raw_handler_lock);
+	mutex_unlock(&ir_raw_handler_lock);
 }
 EXPORT_SYMBOL(ir_raw_handler_unregister);
 

drivers/media/IR/ir-sysfs.c

@@ -325,6 +325,7 @@ static int __init ir_core_init(void)
 
 	/* Initialize/load the decoders/keymap code that will be used */
 	ir_raw_init();
+	ir_rcmap_init();
 
 	return 0;
 }
@@ -332,6 +333,7 @@ static int __init ir_core_init(void)
 static void __exit ir_core_exit(void)
 {
 	class_unregister(&ir_input_class);
+	ir_rcmap_cleanup();
 }
 
 module_init(ir_core_init);

drivers/media/IR/keymaps/Makefile

@@ -19,7 +19,6 @@ obj-$(CONFIG_RC_MAP) += rc-adstech-dvb-t-pci.o \
 			rc-dm1105-nec.o \
 			rc-dntv-live-dvb-t.o \
 			rc-dntv-live-dvbt-pro.o \
-			rc-empty.o \
 			rc-em-terratec.o \
 			rc-encore-enltv2.o \
 			rc-encore-enltv.o \
@@ -59,6 +58,7 @@ obj-$(CONFIG_RC_MAP) += rc-adstech-dvb-t-pci.o \
 			rc-purpletv.o \
 			rc-pv951.o \
 			rc-rc5-hauppauge-new.o \
+			rc-rc5-streamzap.o \
 			rc-rc5-tv.o \
 			rc-rc6-mce.o \
 			rc-real-audio-220-32-keys.o \

drivers/media/IR/keymaps/rc-empty.c

@@ -1,44 +0,0 @@
-/* empty.h - Keytable for empty Remote Controller
- *
- * keymap imported from ir-keymaps.c
- *
- * Copyright (c) 2010 by Mauro Carvalho Chehab <mchehab@redhat.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-#include <media/rc-map.h>
-
-/* empty keytable, can be used as placeholder for not-yet created keytables */
-
-static struct ir_scancode empty[] = {
-	{ 0x2a, KEY_COFFEE },
-};
-
-static struct rc_keymap empty_map = {
-	.map = {
-		.scan    = empty,
-		.size    = ARRAY_SIZE(empty),
-		.ir_type = IR_TYPE_UNKNOWN,	/* Legacy IR type */
-		.name    = RC_MAP_EMPTY,
-	}
-};
-
-static int __init init_rc_map_empty(void)
-{
-	return ir_register_map(&empty_map);
-}
-
-static void __exit exit_rc_map_empty(void)
-{
-	ir_unregister_map(&empty_map);
-}
-
-module_init(init_rc_map_empty)
-module_exit(exit_rc_map_empty)
-
-MODULE_LICENSE("GPL");
-MODULE_AUTHOR("Mauro Carvalho Chehab <mchehab@redhat.com>");

drivers/media/IR/keymaps/rc-rc5-streamzap.c

@@ -0,0 +1,81 @@
+/* rc-rc5-streamzap.c - Keytable for Streamzap PC Remote, for use
+ * with the Streamzap PC Remote IR Receiver.
+ *
+ * Copyright (c) 2010 by Jarod Wilson <jarod@redhat.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#include <media/rc-map.h>
+
+static struct ir_scancode rc5_streamzap[] = {
+/*
+ * FIXME: The Streamzap remote isn't actually true RC-5, it has an extra
+ * bit in it, which presently throws the in-kernel RC-5 decoder for a loop.
+ * We either have to enhance the decoder to support it, add a new decoder,
+ * or just rely on lirc userspace decoding.
+ */
+	{ 0x00, KEY_NUMERIC_0 },
+	{ 0x01, KEY_NUMERIC_1 },
+	{ 0x02, KEY_NUMERIC_2 },
+	{ 0x03, KEY_NUMERIC_3 },
+	{ 0x04, KEY_NUMERIC_4 },
+	{ 0x05, KEY_NUMERIC_5 },
+	{ 0x06, KEY_NUMERIC_6 },
+	{ 0x07, KEY_NUMERIC_7 },
+	{ 0x08, KEY_NUMERIC_8 },
+	{ 0x0a, KEY_POWER },
+	{ 0x0b, KEY_MUTE },
+	{ 0x0c, KEY_CHANNELUP },
+	{ 0x0d, KEY_VOLUMEUP },
+	{ 0x0e, KEY_CHANNELDOWN },
+	{ 0x0f, KEY_VOLUMEDOWN },
+	{ 0x10, KEY_UP },
+	{ 0x11, KEY_LEFT },
+	{ 0x12, KEY_OK },
+	{ 0x13, KEY_RIGHT },
+	{ 0x14, KEY_DOWN },
+	{ 0x15, KEY_MENU },
+	{ 0x16, KEY_EXIT },
+	{ 0x17, KEY_PLAY },
+	{ 0x18, KEY_PAUSE },
+	{ 0x19, KEY_STOP },
+	{ 0x1a, KEY_BACK },
+	{ 0x1b, KEY_FORWARD },
+	{ 0x1c, KEY_RECORD },
+	{ 0x1d, KEY_REWIND },
+	{ 0x1e, KEY_FASTFORWARD },
+	{ 0x20, KEY_RED },
+	{ 0x21, KEY_GREEN },
+	{ 0x22, KEY_YELLOW },
+	{ 0x23, KEY_BLUE },
+
+};
+
+static struct rc_keymap rc5_streamzap_map = {
+	.map = {
+		.scan    = rc5_streamzap,
+		.size    = ARRAY_SIZE(rc5_streamzap),
+		.ir_type = IR_TYPE_RC5,
+		.name    = RC_MAP_RC5_STREAMZAP,
+	}
+};
+
+static int __init init_rc_map_rc5_streamzap(void)
+{
+	return ir_register_map(&rc5_streamzap_map);
+}
+
+static void __exit exit_rc_map_rc5_streamzap(void)
+{
+	ir_unregister_map(&rc5_streamzap_map);
+}
+
+module_init(init_rc_map_rc5_streamzap)
+module_exit(exit_rc_map_rc5_streamzap)
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Jarod Wilson <jarod@redhat.com>");

drivers/media/IR/keymaps/rc-rc6-mce.c

@@ -74,6 +74,8 @@ static struct ir_scancode rc6_mce[] = {
 	{ 0x800f045a, KEY_SUBTITLE }, /* Caption/Teletext */
 	{ 0x800f044d, KEY_TITLE },
 
+       { 0x800f044e, KEY_PRINT }, /* Print - HP OEM version of remote */
+
 	{ 0x800f040c, KEY_POWER },
 	{ 0x800f040d, KEY_PROG1 }, /* Windows MCE button */
 

drivers/media/IR/mceusb.c

@@ -228,7 +228,6 @@ static struct usb_device_id std_tx_mask_list[] = {
 /* data structure for each usb transceiver */
 struct mceusb_dev {
 	/* ir-core bits */
-	struct ir_input_dev *irdev;
 	struct ir_dev_props *props;
 	struct ir_raw_event rawir;
 
@@ -428,7 +427,7 @@ static void mceusb_dev_printdata(struct mceusb_dev *ir, char *buf,
 	}
 }
 
-static void usb_async_callback(struct urb *urb, struct pt_regs *regs)
+static void mce_async_callback(struct urb *urb, struct pt_regs *regs)
 {
 	struct mceusb_dev *ir;
 	int len;
@@ -477,7 +476,7 @@ static void mce_request_packet(struct mceusb_dev *ir,
 		/* outbound data */
 		usb_fill_int_urb(async_urb, ir->usbdev,
 			usb_sndintpipe(ir->usbdev, ep->bEndpointAddress),
-			async_buf, size, (usb_complete_t) usb_async_callback,
+			async_buf, size, (usb_complete_t)mce_async_callback,
 			ir, ep->bInterval);
 		memcpy(async_buf, data, size);
 
@@ -739,7 +738,7 @@ static void mceusb_dev_recv(struct urb *urb, struct pt_regs *regs)
 
 	if (ir->send_flags == RECV_FLAG_IN_PROGRESS) {
 		ir->send_flags = SEND_FLAG_COMPLETE;
-		dev_dbg(&ir->irdev->dev, "setup answer received %d bytes\n",
+		dev_dbg(ir->dev, "setup answer received %d bytes\n",
 			buf_len);
 	}
 
@@ -861,7 +860,6 @@ static struct input_dev *mceusb_init_input_dev(struct mceusb_dev *ir)
 {
 	struct input_dev *idev;
 	struct ir_dev_props *props;
-	struct ir_input_dev *irdev;
 	struct device *dev = ir->dev;
 	int ret = -ENODEV;
 
@@ -878,12 +876,6 @@ static struct input_dev *mceusb_init_input_dev(struct mceusb_dev *ir)
 		goto props_alloc_failed;
 	}
 
-	irdev = kzalloc(sizeof(struct ir_input_dev), GFP_KERNEL);
-	if (!irdev) {
-		dev_err(dev, "remote ir input dev allocation failed\n");
-		goto ir_dev_alloc_failed;
-	}
-
 	snprintf(ir->name, sizeof(ir->name), "Media Center Ed. eHome "
 		 "Infrared Remote Transceiver (%04x:%04x)",
 		 le16_to_cpu(ir->usbdev->descriptor.idVendor),
@@ -902,9 +894,6 @@ static struct input_dev *mceusb_init_input_dev(struct mceusb_dev *ir)
 	props->tx_ir = mceusb_tx_ir;
 
 	ir->props = props;
-	ir->irdev = irdev;
-
-	input_set_drvdata(idev, irdev);
 
 	ret = ir_input_register(idev, RC_MAP_RC6_MCE, props, DRIVER_NAME);
 	if (ret < 0) {
@@ -915,8 +904,6 @@ static struct input_dev *mceusb_init_input_dev(struct mceusb_dev *ir)
 	return idev;
 
 irdev_failed:
-	kfree(irdev);
-ir_dev_alloc_failed:
 	kfree(props);
 props_alloc_failed:
 	input_free_device(idev);
@@ -932,7 +919,6 @@ static int __devinit mceusb_dev_probe(struct usb_interface *intf,
 	struct usb_endpoint_descriptor *ep = NULL;
 	struct usb_endpoint_descriptor *ep_in = NULL;
 	struct usb_endpoint_descriptor *ep_out = NULL;
-	struct usb_host_config *config;
 	struct mceusb_dev *ir = NULL;
 	int pipe, maxp, i;
 	char buf[63], name[128] = "";
@@ -942,7 +928,6 @@ static int __devinit mceusb_dev_probe(struct usb_interface *intf,
 
 	dev_dbg(&intf->dev, ": %s called\n", __func__);
 
-	config = dev->actconfig;
 	idesc  = intf->cur_altsetting;
 
 	is_gen3 = usb_match_id(intf, gen3_list) ? 1 : 0;

drivers/media/IR/rc-map.c

@@ -82,3 +82,26 @@ void ir_unregister_map(struct rc_keymap *map)
 }
 EXPORT_SYMBOL_GPL(ir_unregister_map);
 
+
+static struct ir_scancode empty[] = {
+	{ 0x2a, KEY_COFFEE },
+};
+
+static struct rc_keymap empty_map = {
+	.map = {
+		.scan    = empty,
+		.size    = ARRAY_SIZE(empty),
+		.ir_type = IR_TYPE_UNKNOWN,	/* Legacy IR type */
+		.name    = RC_MAP_EMPTY,
+	}
+};
+
+int ir_rcmap_init(void)
+{
+	return ir_register_map(&empty_map);
+}
+
+void ir_rcmap_cleanup(void)
+{
+	ir_unregister_map(&empty_map);
+}

drivers/media/IR/streamzap.c

@@ -0,0 +1,741 @@
+/*
+ * Streamzap Remote Control driver
+ *
+ * Copyright (c) 2005 Christoph Bartelmus <lirc@bartelmus.de>
+ * Copyright (c) 2010 Jarod Wilson <jarod@wilsonet.com>
+ *
+ * This driver was based on the work of Greg Wickham and Adrian
+ * Dewhurst. It was substantially rewritten to support correct signal
+ * gaps and now maintains a delay buffer, which is used to present
+ * consistent timing behaviour to user space applications. Without the
+ * delay buffer an ugly hack would be required in lircd, which can
+ * cause sluggish signal decoding in certain situations.
+ *
+ * Ported to in-kernel ir-core interface by Jarod Wilson
+ *
+ * This driver is based on the USB skeleton driver packaged with the
+ * kernel; copyright (C) 2001-2003 Greg Kroah-Hartman (greg@kroah.com)
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation; either version 2 of the License, or
+ *  (at your option) any later version.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License
+ *  along with this program; if not, write to the Free Software
+ *  Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+#include <linux/device.h>
+#include <linux/module.h>
+#include <linux/slab.h>
+#include <linux/usb.h>
+#include <linux/input.h>
+#include <media/ir-core.h>
+
+#define DRIVER_VERSION	"1.60"
+#define DRIVER_NAME	"streamzap"
+#define DRIVER_DESC	"Streamzap Remote Control driver"
+
+#ifdef CONFIG_USB_DEBUG
+static int debug = 1;
+#else
+static int debug;
+#endif
+
+#define USB_STREAMZAP_VENDOR_ID		0x0e9c
+#define USB_STREAMZAP_PRODUCT_ID	0x0000
+
+/* table of devices that work with this driver */
+static struct usb_device_id streamzap_table[] = {
+	/* Streamzap Remote Control */
+	{ USB_DEVICE(USB_STREAMZAP_VENDOR_ID, USB_STREAMZAP_PRODUCT_ID) },
+	/* Terminating entry */
+	{ }
+};
+
+MODULE_DEVICE_TABLE(usb, streamzap_table);
+
+#define STREAMZAP_PULSE_MASK 0xf0
+#define STREAMZAP_SPACE_MASK 0x0f
+#define STREAMZAP_TIMEOUT    0xff
+#define STREAMZAP_RESOLUTION 256
+
+/* number of samples buffered */
+#define SZ_BUF_LEN 128
+
+enum StreamzapDecoderState {
+	PulseSpace,
+	FullPulse,
+	FullSpace,
+	IgnorePulse
+};
+
+/* structure to hold our device specific stuff */
+struct streamzap_ir {
+
+	/* ir-core */
+	struct ir_dev_props *props;
+	struct ir_raw_event rawir;
+
+	/* core device info */
+	struct device *dev;
+	struct input_dev *idev;
+
+	/* usb */
+	struct usb_device	*usbdev;
+	struct usb_interface	*interface;
+	struct usb_endpoint_descriptor *endpoint;
+	struct urb		*urb_in;
+
+	/* buffer & dma */
+	unsigned char		*buf_in;
+	dma_addr_t		dma_in;
+	unsigned int		buf_in_len;
+
+	/* timer used to support delay buffering */
+	struct timer_list	delay_timer;
+	bool			timer_running;
+	spinlock_t		timer_lock;
+	struct timer_list	flush_timer;
+	bool			flush;
+
+	/* delay buffer */
+	struct kfifo fifo;
+	bool fifo_initialized;
+
+	/* track what state we're in */
+	enum StreamzapDecoderState decoder_state;
+	/* tracks whether we are currently receiving some signal */
+	bool			idle;
+	/* sum of signal lengths received since signal start */
+	unsigned long		sum;
+	/* start time of signal; necessary for gap tracking */
+	struct timeval		signal_last;
+	struct timeval		signal_start;
+	/* bool			timeout_enabled; */
+
+	char			name[128];
+	char			phys[64];
+};
+
+
+/* local function prototypes */
+static int streamzap_probe(struct usb_interface *interface,
+			   const struct usb_device_id *id);
+static void streamzap_disconnect(struct usb_interface *interface);
+static void streamzap_callback(struct urb *urb);
+static int streamzap_suspend(struct usb_interface *intf, pm_message_t message);
+static int streamzap_resume(struct usb_interface *intf);
+
+/* usb specific object needed to register this driver with the usb subsystem */
+static struct usb_driver streamzap_driver = {
+	.name =		DRIVER_NAME,
+	.probe =	streamzap_probe,
+	.disconnect =	streamzap_disconnect,
+	.suspend =	streamzap_suspend,
+	.resume =	streamzap_resume,
+	.id_table =	streamzap_table,
+};
+
+static void streamzap_stop_timer(struct streamzap_ir *sz)
+{
+	unsigned long flags;
+
+	spin_lock_irqsave(&sz->timer_lock, flags);
+	if (sz->timer_running) {
+		sz->timer_running = false;
+		spin_unlock_irqrestore(&sz->timer_lock, flags);
+		del_timer_sync(&sz->delay_timer);
+	} else {
+		spin_unlock_irqrestore(&sz->timer_lock, flags);
+	}
+}
+
+static void streamzap_flush_timeout(unsigned long arg)
+{
+	struct streamzap_ir *sz = (struct streamzap_ir *)arg;
+
+	dev_info(sz->dev, "%s: callback firing\n", __func__);
+
+	/* finally start accepting data */
+	sz->flush = false;
+}
+
+static void streamzap_delay_timeout(unsigned long arg)
+{
+	struct streamzap_ir *sz = (struct streamzap_ir *)arg;
+	struct ir_raw_event rawir = { .pulse = false, .duration = 0 };
+	unsigned long flags;
+	int len, ret;
+	static unsigned long delay;
+	bool wake = false;
+
+	/* deliver data every 10 ms */
+	delay = msecs_to_jiffies(10);
+
+	spin_lock_irqsave(&sz->timer_lock, flags);
+
+	if (kfifo_len(&sz->fifo) > 0) {
+		ret = kfifo_out(&sz->fifo, &rawir, sizeof(rawir));
+		if (ret != sizeof(rawir))
+			dev_err(sz->dev, "Problem w/kfifo_out...\n");
+		ir_raw_event_store(sz->idev, &rawir);
+		wake = true;
+	}
+
+	len = kfifo_len(&sz->fifo);
+	if (len > 0) {
+		while ((len < SZ_BUF_LEN / 2) &&
+		       (len < SZ_BUF_LEN * sizeof(int))) {
+			ret = kfifo_out(&sz->fifo, &rawir, sizeof(rawir));
+			if (ret != sizeof(rawir))
+				dev_err(sz->dev, "Problem w/kfifo_out...\n");
+			ir_raw_event_store(sz->idev, &rawir);
+			wake = true;
+			len = kfifo_len(&sz->fifo);
+		}
+		if (sz->timer_running)
+			mod_timer(&sz->delay_timer, jiffies + delay);
+
+	} else {
+		sz->timer_running = false;
+	}
+
+	if (wake)
+		ir_raw_event_handle(sz->idev);
+
+	spin_unlock_irqrestore(&sz->timer_lock, flags);
+}
+
+static void streamzap_flush_delay_buffer(struct streamzap_ir *sz)
+{
+	struct ir_raw_event rawir = { .pulse = false, .duration = 0 };
+	bool wake = false;
+	int ret;
+
+	while (kfifo_len(&sz->fifo) > 0) {
+		ret = kfifo_out(&sz->fifo, &rawir, sizeof(rawir));
+		if (ret != sizeof(rawir))
+			dev_err(sz->dev, "Problem w/kfifo_out...\n");
+		ir_raw_event_store(sz->idev, &rawir);
+		wake = true;
+	}
+
+	if (wake)
+		ir_raw_event_handle(sz->idev);
+}
+
+static void sz_push(struct streamzap_ir *sz)
+{
+	struct ir_raw_event rawir = { .pulse = false, .duration = 0 };
+	unsigned long flags;
+	int ret;
+
+	spin_lock_irqsave(&sz->timer_lock, flags);
+	if (kfifo_len(&sz->fifo) >= sizeof(int) * SZ_BUF_LEN) {
+		ret = kfifo_out(&sz->fifo, &rawir, sizeof(rawir));
+		if (ret != sizeof(rawir))
+			dev_err(sz->dev, "Problem w/kfifo_out...\n");
+		ir_raw_event_store(sz->idev, &rawir);
+	}
+
+	kfifo_in(&sz->fifo, &sz->rawir, sizeof(rawir));
+
+	if (!sz->timer_running) {
+		sz->delay_timer.expires = jiffies + (HZ / 10);
+		add_timer(&sz->delay_timer);
+		sz->timer_running = true;
+	}
+
+	spin_unlock_irqrestore(&sz->timer_lock, flags);
+}
+
+static void sz_push_full_pulse(struct streamzap_ir *sz,
+			       unsigned char value)
+{
+	if (sz->idle) {
+		long deltv;
+
+		sz->signal_last = sz->signal_start;
+		do_gettimeofday(&sz->signal_start);
+
+		deltv = sz->signal_start.tv_sec - sz->signal_last.tv_sec;
+		sz->rawir.pulse = false;
+		if (deltv > 15) {
+			/* really long time */
+			sz->rawir.duration = IR_MAX_DURATION;
+		} else {
+			sz->rawir.duration = (int)(deltv * 1000000 +
+				sz->signal_start.tv_usec -
+				sz->signal_last.tv_usec);
+			sz->rawir.duration -= sz->sum;
+			sz->rawir.duration *= 1000;
+			sz->rawir.duration &= IR_MAX_DURATION;
+		}
+		dev_dbg(sz->dev, "ls %u\n", sz->rawir.duration);
+		sz_push(sz);
+
+		sz->idle = 0;
+		sz->sum = 0;
+	}
+
+	sz->rawir.pulse = true;
+	sz->rawir.duration = ((int) value) * STREAMZAP_RESOLUTION;
+	sz->rawir.duration += STREAMZAP_RESOLUTION / 2;
+	sz->sum += sz->rawir.duration;
+	sz->rawir.duration *= 1000;
+	sz->rawir.duration &= IR_MAX_DURATION;
+	dev_dbg(sz->dev, "p %u\n", sz->rawir.duration);
+	sz_push(sz);
+}
+
+static void sz_push_half_pulse(struct streamzap_ir *sz,
+			       unsigned char value)
+{
+	sz_push_full_pulse(sz, (value & STREAMZAP_PULSE_MASK) >> 4);
+}
+
+static void sz_push_full_space(struct streamzap_ir *sz,
+			       unsigned char value)
+{
+	sz->rawir.pulse = false;
+	sz->rawir.duration = ((int) value) * STREAMZAP_RESOLUTION;
+	sz->rawir.duration += STREAMZAP_RESOLUTION / 2;
+	sz->sum += sz->rawir.duration;
+	sz->rawir.duration *= 1000;
+	dev_dbg(sz->dev, "s %u\n", sz->rawir.duration);
+	sz_push(sz);
+}
+
+static void sz_push_half_space(struct streamzap_ir *sz,
+			       unsigned long value)
+{
+	sz_push_full_space(sz, value & STREAMZAP_SPACE_MASK);
+}
+
+/**
+ * streamzap_callback - usb IRQ handler callback
+ *
+ * This procedure is invoked on reception of data from
+ * the usb remote.
+ */
+static void streamzap_callback(struct urb *urb)
+{
+	struct streamzap_ir *sz;
+	unsigned int i;
+	int len;
+	#if 0
+	static int timeout = (((STREAMZAP_TIMEOUT * STREAMZAP_RESOLUTION) &
+				IR_MAX_DURATION) | 0x03000000);
+	#endif
+
+	if (!urb)
+		return;
+
+	sz = urb->context;
+	len = urb->actual_length;
+
+	switch (urb->status) {
+	case -ECONNRESET:
+	case -ENOENT:
+	case -ESHUTDOWN:
+		/*
+		 * this urb is terminated, clean up.
+		 * sz might already be invalid at this point
+		 */
+		dev_err(sz->dev, "urb terminated, status: %d\n", urb->status);
+		return;
+	default:
+		break;
+	}
+
+	dev_dbg(sz->dev, "%s: received urb, len %d\n", __func__, len);
+	if (!sz->flush) {
+		for (i = 0; i < urb->actual_length; i++) {
+			dev_dbg(sz->dev, "%d: %x\n", i,
+				(unsigned char)sz->buf_in[i]);
+			switch (sz->decoder_state) {
+			case PulseSpace:
+				if ((sz->buf_in[i] & STREAMZAP_PULSE_MASK) ==
+				    STREAMZAP_PULSE_MASK) {
+					sz->decoder_state = FullPulse;
+					continue;
+				} else if ((sz->buf_in[i] & STREAMZAP_SPACE_MASK)
+					   == STREAMZAP_SPACE_MASK) {
+					sz_push_half_pulse(sz, sz->buf_in[i]);
+					sz->decoder_state = FullSpace;
+					continue;
+				} else {
+					sz_push_half_pulse(sz, sz->buf_in[i]);
+					sz_push_half_space(sz, sz->buf_in[i]);
+				}
+				break;
+			case FullPulse:
+				sz_push_full_pulse(sz, sz->buf_in[i]);
+				sz->decoder_state = IgnorePulse;
+				break;
+			case FullSpace:
+				if (sz->buf_in[i] == STREAMZAP_TIMEOUT) {
+					sz->idle = 1;
+					streamzap_stop_timer(sz);
+					#if 0
+					if (sz->timeout_enabled) {
+						sz->rawir.pulse = false;
+						sz->rawir.duration = timeout;
+						sz->rawir.duration *= 1000;
+						sz_push(sz);
+					}
+					#endif
+					streamzap_flush_delay_buffer(sz);
+				} else
+					sz_push_full_space(sz, sz->buf_in[i]);
+				sz->decoder_state = PulseSpace;
+				break;
+			case IgnorePulse:
+				if ((sz->buf_in[i]&STREAMZAP_SPACE_MASK) ==
+				    STREAMZAP_SPACE_MASK) {
+					sz->decoder_state = FullSpace;
+					continue;
+				}
+				sz_push_half_space(sz, sz->buf_in[i]);
+				sz->decoder_state = PulseSpace;
+				break;
+			}
+		}
+	}
+
+	usb_submit_urb(urb, GFP_ATOMIC);
+
+	return;
+}
+
+static struct input_dev *streamzap_init_input_dev(struct streamzap_ir *sz)
+{
+	struct input_dev *idev;
+	struct ir_dev_props *props;
+	struct device *dev = sz->dev;
+	int ret;
+
+	idev = input_allocate_device();
+	if (!idev) {
+		dev_err(dev, "remote input dev allocation failed\n");
+		goto idev_alloc_failed;
+	}
+
+	props = kzalloc(sizeof(struct ir_dev_props), GFP_KERNEL);
+	if (!props) {
+		dev_err(dev, "remote ir dev props allocation failed\n");
+		goto props_alloc_failed;
+	}
+
+	snprintf(sz->name, sizeof(sz->name), "Streamzap PC Remote Infrared "
+		 "Receiver (%04x:%04x)",
+		 le16_to_cpu(sz->usbdev->descriptor.idVendor),
+		 le16_to_cpu(sz->usbdev->descriptor.idProduct));
+
+	idev->name = sz->name;
+	usb_make_path(sz->usbdev, sz->phys, sizeof(sz->phys));
+	strlcat(sz->phys, "/input0", sizeof(sz->phys));
+	idev->phys = sz->phys;
+
+	props->priv = sz;
+	props->driver_type = RC_DRIVER_IR_RAW;
+	/* FIXME: not sure about supported protocols, check on this */
+	props->allowed_protos = IR_TYPE_RC5 | IR_TYPE_RC6;
+
+	sz->props = props;
+
+	ret = ir_input_register(idev, RC_MAP_RC5_STREAMZAP, props, DRIVER_NAME);
+	if (ret < 0) {
+		dev_err(dev, "remote input device register failed\n");
+		goto irdev_failed;
+	}
+
+	return idev;
+
+irdev_failed:
+	kfree(props);
+props_alloc_failed:
+	input_free_device(idev);
+idev_alloc_failed:
+	return NULL;
+}
+
+static int streamzap_delay_buf_init(struct streamzap_ir *sz)
+{
+	int ret;
+
+	ret = kfifo_alloc(&sz->fifo, sizeof(int) * SZ_BUF_LEN,
+			  GFP_KERNEL);
+	if (ret == 0)
+		sz->fifo_initialized = 1;
+
+	return ret;
+}
+
+static void streamzap_start_flush_timer(struct streamzap_ir *sz)
+{
+	sz->flush_timer.expires = jiffies + HZ;
+	sz->flush = true;
+	add_timer(&sz->flush_timer);
+
+	sz->urb_in->dev = sz->usbdev;
+	if (usb_submit_urb(sz->urb_in, GFP_ATOMIC))
+		dev_err(sz->dev, "urb submit failed\n");
+}
+
+/**
+ *	streamzap_probe
+ *
+ *	Called by usb-core to associated with a candidate device
+ *	On any failure the return value is the ERROR
+ *	On success return 0
+ */
+static int __devinit streamzap_probe(struct usb_interface *intf,
+				     const struct usb_device_id *id)
+{
+	struct usb_device *usbdev = interface_to_usbdev(intf);
+	struct usb_host_interface *iface_host;
+	struct streamzap_ir *sz = NULL;
+	char buf[63], name[128] = "";
+	int retval = -ENOMEM;
+	int pipe, maxp;
+
+	/* Allocate space for device driver specific data */
+	sz = kzalloc(sizeof(struct streamzap_ir), GFP_KERNEL);
+	if (!sz)
+		return -ENOMEM;
+
+	sz->usbdev = usbdev;
+	sz->interface = intf;
+
+	/* Check to ensure endpoint information matches requirements */
+	iface_host = intf->cur_altsetting;
+
+	if (iface_host->desc.bNumEndpoints != 1) {
+		dev_err(&intf->dev, "%s: Unexpected desc.bNumEndpoints (%d)\n",
+			__func__, iface_host->desc.bNumEndpoints);
+		retval = -ENODEV;
+		goto free_sz;
+	}
+
+	sz->endpoint = &(iface_host->endpoint[0].desc);
+	if ((sz->endpoint->bEndpointAddress & USB_ENDPOINT_DIR_MASK)
+	    != USB_DIR_IN) {
+		dev_err(&intf->dev, "%s: endpoint doesn't match input device "
+			"02%02x\n", __func__, sz->endpoint->bEndpointAddress);
+		retval = -ENODEV;
+		goto free_sz;
+	}
+
+	if ((sz->endpoint->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK)
+	    != USB_ENDPOINT_XFER_INT) {
+		dev_err(&intf->dev, "%s: endpoint attributes don't match xfer "
+			"02%02x\n", __func__, sz->endpoint->bmAttributes);
+		retval = -ENODEV;
+		goto free_sz;
+	}
+
+	pipe = usb_rcvintpipe(usbdev, sz->endpoint->bEndpointAddress);
+	maxp = usb_maxpacket(usbdev, pipe, usb_pipeout(pipe));
+
+	if (maxp == 0) {
+		dev_err(&intf->dev, "%s: endpoint Max Packet Size is 0!?!\n",
+			__func__);
+		retval = -ENODEV;
+		goto free_sz;
+	}
+
+	/* Allocate the USB buffer and IRQ URB */
+	sz->buf_in = usb_alloc_coherent(usbdev, maxp, GFP_ATOMIC, &sz->dma_in);
+	if (!sz->buf_in)
+		goto free_sz;
+
+	sz->urb_in = usb_alloc_urb(0, GFP_KERNEL);
+	if (!sz->urb_in)
+		goto free_buf_in;
+
+	sz->dev = &intf->dev;
+	sz->buf_in_len = maxp;
+
+	if (usbdev->descriptor.iManufacturer
+	    && usb_string(usbdev, usbdev->descriptor.iManufacturer,
+			  buf, sizeof(buf)) > 0)
+		strlcpy(name, buf, sizeof(name));
+
+	if (usbdev->descriptor.iProduct
+	    && usb_string(usbdev, usbdev->descriptor.iProduct,
+			  buf, sizeof(buf)) > 0)
+		snprintf(name + strlen(name), sizeof(name) - strlen(name),
+			 " %s", buf);
+
+	retval = streamzap_delay_buf_init(sz);
+	if (retval) {
+		dev_err(&intf->dev, "%s: delay buffer init failed\n", __func__);
+		goto free_urb_in;
+	}
+
+	sz->idev = streamzap_init_input_dev(sz);
+	if (!sz->idev)
+		goto input_dev_fail;
+
+	sz->idle = true;
+	sz->decoder_state = PulseSpace;
+	#if 0
+	/* not yet supported, depends on patches from maxim */
+	/* see also: LIRC_GET_REC_RESOLUTION and LIRC_SET_REC_TIMEOUT */
+	sz->timeout_enabled = false;
+	sz->min_timeout = STREAMZAP_TIMEOUT * STREAMZAP_RESOLUTION * 1000;
+	sz->max_timeout = STREAMZAP_TIMEOUT * STREAMZAP_RESOLUTION * 1000;
+	#endif
+
+	init_timer(&sz->delay_timer);
+	sz->delay_timer.function = streamzap_delay_timeout;
+	sz->delay_timer.data = (unsigned long)sz;
+	spin_lock_init(&sz->timer_lock);
+
+	init_timer(&sz->flush_timer);
+	sz->flush_timer.function = streamzap_flush_timeout;
+	sz->flush_timer.data = (unsigned long)sz;
+
+	do_gettimeofday(&sz->signal_start);
+
+	/* Complete final initialisations */
+	usb_fill_int_urb(sz->urb_in, usbdev, pipe, sz->buf_in,
+			 maxp, (usb_complete_t)streamzap_callback,
+			 sz, sz->endpoint->bInterval);
+	sz->urb_in->transfer_dma = sz->dma_in;
+	sz->urb_in->transfer_flags |= URB_NO_TRANSFER_DMA_MAP;
+
+	usb_set_intfdata(intf, sz);
+
+	streamzap_start_flush_timer(sz);
+
+	dev_info(sz->dev, "Registered %s on usb%d:%d\n", name,
+		 usbdev->bus->busnum, usbdev->devnum);
+
+	return 0;
+
+input_dev_fail:
+	kfifo_free(&sz->fifo);
+free_urb_in:
+	usb_free_urb(sz->urb_in);
+free_buf_in:
+	usb_free_coherent(usbdev, maxp, sz->buf_in, sz->dma_in);
+free_sz:
+	kfree(sz);
+
+	return retval;
+}
+
+/**
+ * streamzap_disconnect
+ *
+ * Called by the usb core when the device is removed from the system.
+ *
+ * This routine guarantees that the driver will not submit any more urbs
+ * by clearing dev->usbdev.  It is also supposed to terminate any currently
+ * active urbs.  Unfortunately, usb_bulk_msg(), used in streamzap_read(),
+ * does not provide any way to do this.
+ */
+static void streamzap_disconnect(struct usb_interface *interface)
+{
+	struct streamzap_ir *sz = usb_get_intfdata(interface);
+	struct usb_device *usbdev = interface_to_usbdev(interface);
+
+	usb_set_intfdata(interface, NULL);
+
+	if (!sz)
+		return;
+
+	if (sz->flush) {
+		sz->flush = false;
+		del_timer_sync(&sz->flush_timer);
+	}
+
+	streamzap_stop_timer(sz);
+
+	sz->usbdev = NULL;
+	ir_input_unregister(sz->idev);
+	usb_kill_urb(sz->urb_in);
+	usb_free_urb(sz->urb_in);
+	usb_free_coherent(usbdev, sz->buf_in_len, sz->buf_in, sz->dma_in);
+
+	kfree(sz);
+}
+
+static int streamzap_suspend(struct usb_interface *intf, pm_message_t message)
+{
+	struct streamzap_ir *sz = usb_get_intfdata(intf);
+
+	if (sz->flush) {
+		sz->flush = false;
+		del_timer_sync(&sz->flush_timer);
+	}
+
+	streamzap_stop_timer(sz);
+
+	usb_kill_urb(sz->urb_in);
+
+	return 0;
+}
+
+static int streamzap_resume(struct usb_interface *intf)
+{
+	struct streamzap_ir *sz = usb_get_intfdata(intf);
+
+	if (sz->fifo_initialized)
+		kfifo_reset(&sz->fifo);
+
+	sz->flush_timer.expires = jiffies + HZ;
+	sz->flush = true;
+	add_timer(&sz->flush_timer);
+
+	if (usb_submit_urb(sz->urb_in, GFP_ATOMIC)) {
+		dev_err(sz->dev, "Error sumbiting urb\n");
+		return -EIO;
+	}
+
+	return 0;
+}
+
+/**
+ *	streamzap_init
+ */
+static int __init streamzap_init(void)
+{
+	int ret;
+
+	/* register this driver with the USB subsystem */
+	ret = usb_register(&streamzap_driver);
+	if (ret < 0)
+		printk(KERN_ERR DRIVER_NAME ": usb register failed, "
+		       "result = %d\n", ret);
+
+	return ret;
+}
+
+/**
+ *	streamzap_exit
+ */
+static void __exit streamzap_exit(void)
+{
+	usb_deregister(&streamzap_driver);
+}
+
+
+module_init(streamzap_init);
+module_exit(streamzap_exit);
+
+MODULE_AUTHOR("Jarod Wilson <jarod@wilsonet.com>");
+MODULE_DESCRIPTION(DRIVER_DESC);
+MODULE_LICENSE("GPL");
+
+module_param(debug, bool, S_IRUGO | S_IWUSR);
+MODULE_PARM_DESC(debug, "Enable debugging messages");

drivers/media/common/tuners/Kconfig

@@ -34,7 +34,7 @@ config MEDIA_TUNER
 menuconfig MEDIA_TUNER_CUSTOMISE
 	bool "Customize analog and hybrid tuner modules to build"
 	depends on MEDIA_TUNER
-	default n
+	default y if EMBEDDED
 	help
 	  This allows the user to deselect tuner drivers unnecessary
 	  for their hardware from the build. Use this option with care

drivers/media/dvb/bt8xx/dst.c

@@ -1763,7 +1763,15 @@ static struct dvb_frontend_ops dst_dvbt_ops = {
 		.frequency_min = 137000000,
 		.frequency_max = 858000000,
 		.frequency_stepsize = 166667,
-		.caps = FE_CAN_FEC_AUTO | FE_CAN_QAM_AUTO | FE_CAN_TRANSMISSION_MODE_AUTO | FE_CAN_GUARD_INTERVAL_AUTO
+		.caps = FE_CAN_FEC_AUTO			|
+			FE_CAN_QAM_AUTO			|
+			FE_CAN_QAM_16			|
+			FE_CAN_QAM_32			|
+			FE_CAN_QAM_64			|
+			FE_CAN_QAM_128			|
+			FE_CAN_QAM_256			|
+			FE_CAN_TRANSMISSION_MODE_AUTO	|
+			FE_CAN_GUARD_INTERVAL_AUTO
 	},
 
 	.release = dst_release,

drivers/media/dvb/frontends/Kconfig

@@ -1,7 +1,7 @@
 config DVB_FE_CUSTOMISE
 	bool "Customise the frontend modules to build"
 	depends on DVB_CORE
-	default N
+	default y if EMBEDDED
 	help
 	  This allows the user to select/deselect frontend drivers for their
 	  hardware from the build.

drivers/media/dvb/siano/smscoreapi.c

@@ -1113,9 +1113,11 @@ struct smscore_buffer_t *smscore_getbuffer(struct smscore_device_t *coredev)
 	 */
 
 	prepare_to_wait(&coredev->buffer_mng_waitq, &wait, TASK_INTERRUPTIBLE);
-
-	if (list_empty(&coredev->buffers))
+	if (list_empty(&coredev->buffers)) {
+		spin_unlock_irqrestore(&coredev->bufferslock, flags);
 		schedule();
+		spin_lock_irqsave(&coredev->bufferslock, flags);
+	}
 
 	finish_wait(&coredev->buffer_mng_waitq, &wait);
 

drivers/media/video/Kconfig

@@ -83,7 +83,7 @@ config VIDEO_FIXED_MINOR_RANGES
 
 config VIDEO_HELPER_CHIPS_AUTO
 	bool "Autoselect pertinent encoders/decoders and other helper chips"
-	default y
+	default y if !EMBEDDED
 	---help---
 	  Most video cards may require additional modules to encode or
 	  decode audio/video standards. This option will autoselect
@@ -792,10 +792,11 @@ config SOC_CAMERA_MT9M001
 	  and colour models.
 
 config SOC_CAMERA_MT9M111
-	tristate "mt9m111 and mt9m112 support"
+	tristate "mt9m111, mt9m112 and mt9m131 support"
 	depends on SOC_CAMERA && I2C
 	help
-	  This driver supports MT9M111 and MT9M112 cameras from Micron
+	  This driver supports MT9M111, MT9M112 and MT9M131 cameras from
+	  Micron/Aptina
 
 config SOC_CAMERA_MT9T031
 	tristate "mt9t031 support"
@@ -1016,4 +1017,13 @@ config VIDEO_MEM2MEM_TESTDEV
 	  This is a virtual test device for the memory-to-memory driver
 	  framework.
 
+config  VIDEO_SAMSUNG_S5P_FIMC
+	tristate "Samsung S5P FIMC (video postprocessor) driver"
+	depends on VIDEO_DEV && VIDEO_V4L2 && PLAT_S5P
+	select VIDEOBUF_DMA_CONTIG
+	select V4L2_MEM2MEM_DEV
+	help
+	  This is a v4l2 driver for the S5P camera interface
+	  (video postprocessor)
+
 endif # V4L_MEM2MEM_DRIVERS

drivers/media/video/Makefile

@@ -11,7 +11,7 @@ stkwebcam-objs	:=	stk-webcam.o stk-sensor.o
 omap2cam-objs	:=	omap24xxcam.o omap24xxcam-dma.o
 
 videodev-objs	:=	v4l2-dev.o v4l2-ioctl.o v4l2-device.o v4l2-fh.o \
-			v4l2-event.o
+			v4l2-event.o v4l2-ctrls.o
 
 # V4L2 core modules
 
@@ -163,6 +163,7 @@ obj-$(CONFIG_VIDEO_MX3)			+= mx3_camera.o
 obj-$(CONFIG_VIDEO_PXA27x)		+= pxa_camera.o
 obj-$(CONFIG_VIDEO_SH_MOBILE_CSI2)	+= sh_mobile_csi2.o
 obj-$(CONFIG_VIDEO_SH_MOBILE_CEU)	+= sh_mobile_ceu_camera.o
+obj-$(CONFIG_VIDEO_SAMSUNG_S5P_FIMC) 	+= s5p-fimc/
 
 obj-$(CONFIG_ARCH_DAVINCI)		+= davinci/
 

drivers/media/video/cs53l32a.c

@@ -26,10 +26,10 @@
 #include <linux/ioctl.h>
 #include <asm/uaccess.h>
 #include <linux/i2c.h>
-#include <linux/i2c-id.h>
 #include <linux/videodev2.h>
 #include <media/v4l2-device.h>
 #include <media/v4l2-chip-ident.h>
+#include <media/v4l2-ctrls.h>
 #include <media/v4l2-i2c-drv.h>
 
 MODULE_DESCRIPTION("i2c device driver for cs53l32a Audio ADC");
@@ -43,6 +43,21 @@ module_param(debug, bool, 0644);
 MODULE_PARM_DESC(debug, "Debugging messages, 0=Off (default), 1=On");
 
 
+struct cs53l32a_state {
+	struct v4l2_subdev sd;
+	struct v4l2_ctrl_handler hdl;
+};
+
+static inline struct cs53l32a_state *to_state(struct v4l2_subdev *sd)
+{
+	return container_of(sd, struct cs53l32a_state, sd);
+}
+
+static inline struct v4l2_subdev *to_sd(struct v4l2_ctrl *ctrl)
+{
+	return &container_of(ctrl->handler, struct cs53l32a_state, hdl)->sd;
+}
+
 /* ----------------------------------------------------------------------- */
 
 static int cs53l32a_write(struct v4l2_subdev *sd, u8 reg, u8 value)
@@ -74,31 +89,20 @@ static int cs53l32a_s_routing(struct v4l2_subdev *sd,
 	return 0;
 }
 
-static int cs53l32a_g_ctrl(struct v4l2_subdev *sd, struct v4l2_control *ctrl)
+static int cs53l32a_s_ctrl(struct v4l2_ctrl *ctrl)
 {
-	if (ctrl->id == V4L2_CID_AUDIO_MUTE) {
-		ctrl->value = (cs53l32a_read(sd, 0x03) & 0xc0) != 0;
-		return 0;
-	}
-	if (ctrl->id != V4L2_CID_AUDIO_VOLUME)
-		return -EINVAL;
-	ctrl->value = (s8)cs53l32a_read(sd, 0x04);
-	return 0;
-}
+	struct v4l2_subdev *sd = to_sd(ctrl);
 
-static int cs53l32a_s_ctrl(struct v4l2_subdev *sd, struct v4l2_control *ctrl)
-{
-	if (ctrl->id == V4L2_CID_AUDIO_MUTE) {
-		cs53l32a_write(sd, 0x03, ctrl->value ? 0xf0 : 0x30);
+	switch (ctrl->id) {
+	case V4L2_CID_AUDIO_MUTE:
+		cs53l32a_write(sd, 0x03, ctrl->val ? 0xf0 : 0x30);
+		return 0;
+	case V4L2_CID_AUDIO_VOLUME:
+		cs53l32a_write(sd, 0x04, (u8)ctrl->val);
+		cs53l32a_write(sd, 0x05, (u8)ctrl->val);
 		return 0;
 	}
-	if (ctrl->id != V4L2_CID_AUDIO_VOLUME)
-		return -EINVAL;
-	if (ctrl->value > 12 || ctrl->value < -96)
-		return -EINVAL;
-	cs53l32a_write(sd, 0x04, (u8) ctrl->value);
-	cs53l32a_write(sd, 0x05, (u8) ctrl->value);
-	return 0;
+	return -EINVAL;
 }
 
 static int cs53l32a_g_chip_ident(struct v4l2_subdev *sd, struct v4l2_dbg_chip_ident *chip)
@@ -111,23 +115,30 @@ static int cs53l32a_g_chip_ident(struct v4l2_subdev *sd, struct v4l2_dbg_chip_id
 
 static int cs53l32a_log_status(struct v4l2_subdev *sd)
 {
+	struct cs53l32a_state *state = to_state(sd);
 	u8 v = cs53l32a_read(sd, 0x01);
-	u8 m = cs53l32a_read(sd, 0x03);
-	s8 vol = cs53l32a_read(sd, 0x04);
 
-	v4l2_info(sd, "Input:  %d%s\n", (v >> 4) & 3,
-			(m & 0xC0) ? " (muted)" : "");
-	v4l2_info(sd, "Volume: %d dB\n", vol);
+	v4l2_info(sd, "Input:  %d\n", (v >> 4) & 3);
+	v4l2_ctrl_handler_log_status(&state->hdl, sd->name);
 	return 0;
 }
 
 /* ----------------------------------------------------------------------- */
 
+static const struct v4l2_ctrl_ops cs53l32a_ctrl_ops = {
+	.s_ctrl = cs53l32a_s_ctrl,
+};
+
 static const struct v4l2_subdev_core_ops cs53l32a_core_ops = {
 	.log_status = cs53l32a_log_status,
 	.g_chip_ident = cs53l32a_g_chip_ident,
-	.g_ctrl = cs53l32a_g_ctrl,
-	.s_ctrl = cs53l32a_s_ctrl,
+	.g_ext_ctrls = v4l2_subdev_g_ext_ctrls,
+	.try_ext_ctrls = v4l2_subdev_try_ext_ctrls,
+	.s_ext_ctrls = v4l2_subdev_s_ext_ctrls,
+	.g_ctrl = v4l2_subdev_g_ctrl,
+	.s_ctrl = v4l2_subdev_s_ctrl,
+	.queryctrl = v4l2_subdev_queryctrl,
+	.querymenu = v4l2_subdev_querymenu,
 };
 
 static const struct v4l2_subdev_audio_ops cs53l32a_audio_ops = {
@@ -151,6 +162,7 @@ static const struct v4l2_subdev_ops cs53l32a_ops = {
 static int cs53l32a_probe(struct i2c_client *client,
 			  const struct i2c_device_id *id)
 {
+	struct cs53l32a_state *state;
 	struct v4l2_subdev *sd;
 	int i;
 
@@ -164,9 +176,10 @@ static int cs53l32a_probe(struct i2c_client *client,
 	v4l_info(client, "chip found @ 0x%x (%s)\n",
 			client->addr << 1, client->adapter->name);
 
-	sd = kmalloc(sizeof(struct v4l2_subdev), GFP_KERNEL);
-	if (sd == NULL)
+	state = kzalloc(sizeof(struct cs53l32a_state), GFP_KERNEL);
+	if (state == NULL)
 		return -ENOMEM;
+	sd = &state->sd;
 	v4l2_i2c_subdev_init(sd, client, &cs53l32a_ops);
 
 	for (i = 1; i <= 7; i++) {
@@ -175,15 +188,29 @@ static int cs53l32a_probe(struct i2c_client *client,
 		v4l2_dbg(1, debug, sd, "Read Reg %d %02x\n", i, v);
 	}
 
+	v4l2_ctrl_handler_init(&state->hdl, 2);
+	v4l2_ctrl_new_std(&state->hdl, &cs53l32a_ctrl_ops,
+			V4L2_CID_AUDIO_VOLUME, -96, 12, 1, 0);
+	v4l2_ctrl_new_std(&state->hdl, &cs53l32a_ctrl_ops,
+			V4L2_CID_AUDIO_MUTE, 0, 1, 1, 0);
+	sd->ctrl_handler = &state->hdl;
+	if (state->hdl.error) {
+		int err = state->hdl.error;
+
+		v4l2_ctrl_handler_free(&state->hdl);
+		kfree(state);
+		return err;
+	}
+
 	/* Set cs53l32a internal register for Adaptec 2010/2410 setup */
 
-	cs53l32a_write(sd, 0x01, (u8) 0x21);
-	cs53l32a_write(sd, 0x02, (u8) 0x29);
-	cs53l32a_write(sd, 0x03, (u8) 0x30);
-	cs53l32a_write(sd, 0x04, (u8) 0x00);
-	cs53l32a_write(sd, 0x05, (u8) 0x00);
-	cs53l32a_write(sd, 0x06, (u8) 0x00);
-	cs53l32a_write(sd, 0x07, (u8) 0x00);
+	cs53l32a_write(sd, 0x01, 0x21);
+	cs53l32a_write(sd, 0x02, 0x29);
+	cs53l32a_write(sd, 0x03, 0x30);
+	cs53l32a_write(sd, 0x04, 0x00);
+	cs53l32a_write(sd, 0x05, 0x00);
+	cs53l32a_write(sd, 0x06, 0x00);
+	cs53l32a_write(sd, 0x07, 0x00);
 
 	/* Display results, should be 0x21,0x29,0x30,0x00,0x00,0x00,0x00 */
 
@@ -198,9 +225,11 @@ static int cs53l32a_probe(struct i2c_client *client,
 static int cs53l32a_remove(struct i2c_client *client)
 {
 	struct v4l2_subdev *sd = i2c_get_clientdata(client);
+	struct cs53l32a_state *state = to_state(sd);
 
 	v4l2_device_unregister_subdev(sd);
-	kfree(sd);
+	v4l2_ctrl_handler_free(&state->hdl);
+	kfree(state);
 	return 0;
 }
 

drivers/media/video/cx2341x.c

@@ -38,6 +38,145 @@ static int debug;
 module_param(debug, int, 0644);
 MODULE_PARM_DESC(debug, "Debug level (0-1)");
 
+/********************** COMMON CODE *********************/
+
+/* definitions for audio properties bits 29-28 */
+#define CX2341X_AUDIO_ENCODING_METHOD_MPEG	0
+#define CX2341X_AUDIO_ENCODING_METHOD_AC3	1
+#define CX2341X_AUDIO_ENCODING_METHOD_LPCM	2
+
+static const char *cx2341x_get_name(u32 id)
+{
+	switch (id) {
+	case V4L2_CID_MPEG_CX2341X_VIDEO_SPATIAL_FILTER_MODE:
+		return "Spatial Filter Mode";
+	case V4L2_CID_MPEG_CX2341X_VIDEO_SPATIAL_FILTER:
+		return "Spatial Filter";
+	case V4L2_CID_MPEG_CX2341X_VIDEO_LUMA_SPATIAL_FILTER_TYPE:
+		return "Spatial Luma Filter Type";
+	case V4L2_CID_MPEG_CX2341X_VIDEO_CHROMA_SPATIAL_FILTER_TYPE:
+		return "Spatial Chroma Filter Type";
+	case V4L2_CID_MPEG_CX2341X_VIDEO_TEMPORAL_FILTER_MODE:
+		return "Temporal Filter Mode";
+	case V4L2_CID_MPEG_CX2341X_VIDEO_TEMPORAL_FILTER:
+		return "Temporal Filter";
+	case V4L2_CID_MPEG_CX2341X_VIDEO_MEDIAN_FILTER_TYPE:
+		return "Median Filter Type";
+	case V4L2_CID_MPEG_CX2341X_VIDEO_LUMA_MEDIAN_FILTER_TOP:
+		return "Median Luma Filter Maximum";
+	case V4L2_CID_MPEG_CX2341X_VIDEO_LUMA_MEDIAN_FILTER_BOTTOM:
+		return "Median Luma Filter Minimum";
+	case V4L2_CID_MPEG_CX2341X_VIDEO_CHROMA_MEDIAN_FILTER_TOP:
+		return "Median Chroma Filter Maximum";
+	case V4L2_CID_MPEG_CX2341X_VIDEO_CHROMA_MEDIAN_FILTER_BOTTOM:
+		return "Median Chroma Filter Minimum";
+	case V4L2_CID_MPEG_CX2341X_STREAM_INSERT_NAV_PACKETS:
+		return "Insert Navigation Packets";
+	}
+	return NULL;
+}
+
+static const char **cx2341x_get_menu(u32 id)
+{
+	static const char *cx2341x_video_spatial_filter_mode_menu[] = {
+		"Manual",
+		"Auto",
+		NULL
+	};
+
+	static const char *cx2341x_video_luma_spatial_filter_type_menu[] = {
+		"Off",
+		"1D Horizontal",
+		"1D Vertical",
+		"2D H/V Separable",
+		"2D Symmetric non-separable",
+		NULL
+	};
+
+	static const char *cx2341x_video_chroma_spatial_filter_type_menu[] = {
+		"Off",
+		"1D Horizontal",
+		NULL
+	};
+
+	static const char *cx2341x_video_temporal_filter_mode_menu[] = {
+		"Manual",
+		"Auto",
+		NULL
+	};
+
+	static const char *cx2341x_video_median_filter_type_menu[] = {
+		"Off",
+		"Horizontal",
+		"Vertical",
+		"Horizontal/Vertical",
+		"Diagonal",
+		NULL
+	};
+
+	switch (id) {
+	case V4L2_CID_MPEG_CX2341X_VIDEO_SPATIAL_FILTER_MODE:
+		return cx2341x_video_spatial_filter_mode_menu;
+	case V4L2_CID_MPEG_CX2341X_VIDEO_LUMA_SPATIAL_FILTER_TYPE:
+		return cx2341x_video_luma_spatial_filter_type_menu;
+	case V4L2_CID_MPEG_CX2341X_VIDEO_CHROMA_SPATIAL_FILTER_TYPE:
+		return cx2341x_video_chroma_spatial_filter_type_menu;
+	case V4L2_CID_MPEG_CX2341X_VIDEO_TEMPORAL_FILTER_MODE:
+		return cx2341x_video_temporal_filter_mode_menu;
+	case V4L2_CID_MPEG_CX2341X_VIDEO_MEDIAN_FILTER_TYPE:
+		return cx2341x_video_median_filter_type_menu;
+	}
+	return NULL;
+}
+
+static void cx2341x_ctrl_fill(u32 id, const char **name, enum v4l2_ctrl_type *type,
+		    s32 *min, s32 *max, s32 *step, s32 *def, u32 *flags)
+{
+	*name = cx2341x_get_name(id);
+	*flags = 0;
+
+	switch (id) {
+	case V4L2_CID_MPEG_CX2341X_VIDEO_SPATIAL_FILTER_MODE:
+	case V4L2_CID_MPEG_CX2341X_VIDEO_LUMA_SPATIAL_FILTER_TYPE:
+	case V4L2_CID_MPEG_CX2341X_VIDEO_CHROMA_SPATIAL_FILTER_TYPE:
+	case V4L2_CID_MPEG_CX2341X_VIDEO_TEMPORAL_FILTER_MODE:
+	case V4L2_CID_MPEG_CX2341X_VIDEO_MEDIAN_FILTER_TYPE:
+		*type = V4L2_CTRL_TYPE_MENU;
+		*min = 0;
+		*step = 0;
+		break;
+	case V4L2_CID_MPEG_CX2341X_STREAM_INSERT_NAV_PACKETS:
+		*type = V4L2_CTRL_TYPE_BOOLEAN;
+		*min = 0;
+		*max = *step = 1;
+		break;
+	default:
+		*type = V4L2_CTRL_TYPE_INTEGER;
+		break;
+	}
+	switch (id) {
+	case V4L2_CID_MPEG_CX2341X_VIDEO_SPATIAL_FILTER_MODE:
+	case V4L2_CID_MPEG_CX2341X_VIDEO_TEMPORAL_FILTER_MODE:
+	case V4L2_CID_MPEG_CX2341X_VIDEO_MEDIAN_FILTER_TYPE:
+		*flags |= V4L2_CTRL_FLAG_UPDATE;
+		break;
+	case V4L2_CID_MPEG_CX2341X_VIDEO_SPATIAL_FILTER:
+	case V4L2_CID_MPEG_CX2341X_VIDEO_TEMPORAL_FILTER:
+	case V4L2_CID_MPEG_CX2341X_VIDEO_LUMA_MEDIAN_FILTER_TOP:
+	case V4L2_CID_MPEG_CX2341X_VIDEO_LUMA_MEDIAN_FILTER_BOTTOM:
+	case V4L2_CID_MPEG_CX2341X_VIDEO_CHROMA_MEDIAN_FILTER_TOP:
+	case V4L2_CID_MPEG_CX2341X_VIDEO_CHROMA_MEDIAN_FILTER_BOTTOM:
+		*flags |= V4L2_CTRL_FLAG_SLIDER;
+		break;
+	case V4L2_CID_MPEG_VIDEO_ENCODING:
+		*flags |= V4L2_CTRL_FLAG_READ_ONLY;
+		break;
+	}
+}
+
+
+/********************** OLD CODE *********************/
+
 /* Must be sorted from low to high control ID! */
 const u32 cx2341x_mpeg_ctrls[] = {
 	V4L2_CID_MPEG_CLASS,
@@ -134,8 +273,6 @@ static const struct cx2341x_mpeg_params default_params = {
 	.video_chroma_median_filter_top = 255,
 	.video_chroma_median_filter_bottom = 0,
 };
-
-
 /* Map the control ID to the correct field in the cx2341x_mpeg_params
    struct. Return -EINVAL if the ID is unknown, else return 0. */
 static int cx2341x_get_ctrl(const struct cx2341x_mpeg_params *params,
@@ -415,83 +552,33 @@ static int cx2341x_ctrl_query_fill(struct v4l2_queryctrl *qctrl,
 {
 	const char *name;
 
-	qctrl->flags = 0;
 	switch (qctrl->id) {
 	/* MPEG controls */
 	case V4L2_CID_MPEG_CX2341X_VIDEO_SPATIAL_FILTER_MODE:
-		name = "Spatial Filter Mode";
-		break;
 	case V4L2_CID_MPEG_CX2341X_VIDEO_SPATIAL_FILTER:
-		name = "Spatial Filter";
-		break;
 	case V4L2_CID_MPEG_CX2341X_VIDEO_LUMA_SPATIAL_FILTER_TYPE:
-		name = "Spatial Luma Filter Type";
-		break;
 	case V4L2_CID_MPEG_CX2341X_VIDEO_CHROMA_SPATIAL_FILTER_TYPE:
-		name = "Spatial Chroma Filter Type";
-		break;
 	case V4L2_CID_MPEG_CX2341X_VIDEO_TEMPORAL_FILTER_MODE:
-		name = "Temporal Filter Mode";
-		break;
 	case V4L2_CID_MPEG_CX2341X_VIDEO_TEMPORAL_FILTER:
-		name = "Temporal Filter";
-		break;
 	case V4L2_CID_MPEG_CX2341X_VIDEO_MEDIAN_FILTER_TYPE:
-		name = "Median Filter Type";
-		break;
 	case V4L2_CID_MPEG_CX2341X_VIDEO_LUMA_MEDIAN_FILTER_TOP:
-		name = "Median Luma Filter Maximum";
-		break;
 	case V4L2_CID_MPEG_CX2341X_VIDEO_LUMA_MEDIAN_FILTER_BOTTOM:
-		name = "Median Luma Filter Minimum";
-		break;
 	case V4L2_CID_MPEG_CX2341X_VIDEO_CHROMA_MEDIAN_FILTER_TOP:
-		name = "Median Chroma Filter Maximum";
-		break;
 	case V4L2_CID_MPEG_CX2341X_VIDEO_CHROMA_MEDIAN_FILTER_BOTTOM:
-		name = "Median Chroma Filter Minimum";
-		break;
 	case V4L2_CID_MPEG_CX2341X_STREAM_INSERT_NAV_PACKETS:
-		name = "Insert Navigation Packets";
-		break;
+		cx2341x_ctrl_fill(qctrl->id, &name, &qctrl->type,
+				&min, &max, &step, &def, &qctrl->flags);
+		qctrl->minimum = min;
+		qctrl->maximum = max;
+		qctrl->step = step;
+		qctrl->default_value = def;
+		qctrl->reserved[0] = qctrl->reserved[1] = 0;
+		strlcpy(qctrl->name, name, sizeof(qctrl->name));
+		return 0;
 
 	default:
 		return v4l2_ctrl_query_fill(qctrl, min, max, step, def);
 	}
-	switch (qctrl->id) {
-	case V4L2_CID_MPEG_CX2341X_VIDEO_SPATIAL_FILTER_MODE:
-	case V4L2_CID_MPEG_CX2341X_VIDEO_LUMA_SPATIAL_FILTER_TYPE:
-	case V4L2_CID_MPEG_CX2341X_VIDEO_CHROMA_SPATIAL_FILTER_TYPE:
-	case V4L2_CID_MPEG_CX2341X_VIDEO_TEMPORAL_FILTER_MODE:
-	case V4L2_CID_MPEG_CX2341X_VIDEO_MEDIAN_FILTER_TYPE:
-		qctrl->type = V4L2_CTRL_TYPE_MENU;
-		min = 0;
-		step = 1;
-		break;
-	case V4L2_CID_MPEG_CX2341X_STREAM_INSERT_NAV_PACKETS:
-		qctrl->type = V4L2_CTRL_TYPE_BOOLEAN;
-		min = 0;
-		max = 1;
-		step = 1;
-		break;
-	default:
-		qctrl->type = V4L2_CTRL_TYPE_INTEGER;
-		break;
-	}
-	switch (qctrl->id) {
-	case V4L2_CID_MPEG_CX2341X_VIDEO_SPATIAL_FILTER_MODE:
-	case V4L2_CID_MPEG_CX2341X_VIDEO_TEMPORAL_FILTER_MODE:
-	case V4L2_CID_MPEG_CX2341X_VIDEO_MEDIAN_FILTER_TYPE:
-		qctrl->flags |= V4L2_CTRL_FLAG_UPDATE;
-		break;
-	}
-	qctrl->minimum = min;
-	qctrl->maximum = max;
-	qctrl->step = step;
-	qctrl->default_value = def;
-	qctrl->reserved[0] = qctrl->reserved[1] = 0;
-	snprintf(qctrl->name, sizeof(qctrl->name), name);
-	return 0;
 }
 
 int cx2341x_ctrl_query(const struct cx2341x_mpeg_params *params,
@@ -797,42 +884,6 @@ const char **cx2341x_ctrl_get_menu(const struct cx2341x_mpeg_params *p, u32 id)
 		NULL
 	};
 
-	static const char *cx2341x_video_spatial_filter_mode_menu[] = {
-		"Manual",
-		"Auto",
-		NULL
-	};
-
-	static const char *cx2341x_video_luma_spatial_filter_type_menu[] = {
-		"Off",
-		"1D Horizontal",
-		"1D Vertical",
-		"2D H/V Separable",
-		"2D Symmetric non-separable",
-		NULL
-	};
-
-	static const char *cx2341x_video_chroma_spatial_filter_type_menu[] = {
-		"Off",
-		"1D Horizontal",
-		NULL
-	};
-
-	static const char *cx2341x_video_temporal_filter_mode_menu[] = {
-		"Manual",
-		"Auto",
-		NULL
-	};
-
-	static const char *cx2341x_video_median_filter_type_menu[] = {
-		"Off",
-		"Horizontal",
-		"Vertical",
-		"Horizontal/Vertical",
-		"Diagonal",
-		NULL
-	};
-
 	switch (id) {
 	case V4L2_CID_MPEG_STREAM_TYPE:
 		return (p->capabilities & CX2341X_CAP_HAS_TS) ?
@@ -844,26 +895,17 @@ const char **cx2341x_ctrl_get_menu(const struct cx2341x_mpeg_params *p, u32 id)
 	case V4L2_CID_MPEG_AUDIO_L3_BITRATE:
 		return NULL;
 	case V4L2_CID_MPEG_CX2341X_VIDEO_SPATIAL_FILTER_MODE:
-		return cx2341x_video_spatial_filter_mode_menu;
 	case V4L2_CID_MPEG_CX2341X_VIDEO_LUMA_SPATIAL_FILTER_TYPE:
-		return cx2341x_video_luma_spatial_filter_type_menu;
 	case V4L2_CID_MPEG_CX2341X_VIDEO_CHROMA_SPATIAL_FILTER_TYPE:
-		return cx2341x_video_chroma_spatial_filter_type_menu;
 	case V4L2_CID_MPEG_CX2341X_VIDEO_TEMPORAL_FILTER_MODE:
-		return cx2341x_video_temporal_filter_mode_menu;
 	case V4L2_CID_MPEG_CX2341X_VIDEO_MEDIAN_FILTER_TYPE:
-		return cx2341x_video_median_filter_type_menu;
+		return cx2341x_get_menu(id);
 	default:
 		return v4l2_ctrl_get_menu(id);
 	}
 }
 EXPORT_SYMBOL(cx2341x_ctrl_get_menu);
 
-/* definitions for audio properties bits 29-28 */
-#define CX2341X_AUDIO_ENCODING_METHOD_MPEG	0
-#define CX2341X_AUDIO_ENCODING_METHOD_AC3	1
-#define CX2341X_AUDIO_ENCODING_METHOD_LPCM	2
-
 static void cx2341x_calc_audio_properties(struct cx2341x_mpeg_params *params)
 {
 	params->audio_properties =
@@ -1195,9 +1237,490 @@ void cx2341x_log_status(const struct cx2341x_mpeg_params *p, const char *prefix)
 }
 EXPORT_SYMBOL(cx2341x_log_status);
 
-/*
- * Local variables:
- * c-basic-offset: 8
- * End:
- */
 
+
+/********************** NEW CODE *********************/
+
+static inline struct cx2341x_handler *to_cxhdl(struct v4l2_ctrl *ctrl)
+{
+	return container_of(ctrl->handler, struct cx2341x_handler, hdl);
+}
+
+static int cx2341x_hdl_api(struct cx2341x_handler *hdl,
+		       u32 cmd, int args, ...)
+{
+	u32 data[CX2341X_MBOX_MAX_DATA];
+	va_list vargs;
+	int i;
+
+	va_start(vargs, args);
+
+	for (i = 0; i < args; i++)
+		data[i] = va_arg(vargs, int);
+	va_end(vargs);
+	return hdl->func(hdl->priv, cmd, args, 0, data);
+}
+
+/* ctrl->handler->lock is held, so it is safe to access cur.val */
+static inline int cx2341x_neq(struct v4l2_ctrl *ctrl)
+{
+	return ctrl && ctrl->val != ctrl->cur.val;
+}
+
+static int cx2341x_try_ctrl(struct v4l2_ctrl *ctrl)
+{
+	struct cx2341x_handler *hdl = to_cxhdl(ctrl);
+	s32 val = ctrl->val;
+
+	switch (ctrl->id) {
+	case V4L2_CID_MPEG_VIDEO_B_FRAMES: {
+		/* video gop cluster */
+		int b = val + 1;
+		int gop = hdl->video_gop_size->val;
+
+		gop = b * ((gop + b - 1) / b);
+
+		/* Max GOP size = 34 */
+		while (gop > 34)
+			gop -= b;
+		hdl->video_gop_size->val = gop;
+		break;
+	}
+
+	case V4L2_CID_MPEG_STREAM_TYPE:
+		/* stream type cluster */
+		hdl->video_encoding->val =
+		    (hdl->stream_type->val == V4L2_MPEG_STREAM_TYPE_MPEG1_SS ||
+		     hdl->stream_type->val == V4L2_MPEG_STREAM_TYPE_MPEG1_VCD) ?
+			V4L2_MPEG_VIDEO_ENCODING_MPEG_1 :
+			V4L2_MPEG_VIDEO_ENCODING_MPEG_2;
+		if (hdl->video_encoding->val == V4L2_MPEG_VIDEO_ENCODING_MPEG_1)
+			/* MPEG-1 implies CBR */
+			hdl->video_bitrate_mode->val =
+				V4L2_MPEG_VIDEO_BITRATE_MODE_CBR;
+		/* peak bitrate shall be >= normal bitrate */
+		if (hdl->video_bitrate_mode->val == V4L2_MPEG_VIDEO_BITRATE_MODE_VBR &&
+		    hdl->video_bitrate_peak->val < hdl->video_bitrate->val)
+			hdl->video_bitrate_peak->val = hdl->video_bitrate->val;
+		break;
+	}
+	return 0;
+}
+
+static int cx2341x_s_ctrl(struct v4l2_ctrl *ctrl)
+{
+	static const int mpeg_stream_type[] = {
+		0,	/* MPEG-2 PS */
+		1,	/* MPEG-2 TS */
+		2,	/* MPEG-1 SS */
+		14,	/* DVD */
+		11,	/* VCD */
+		12,	/* SVCD */
+	};
+	struct cx2341x_handler *hdl = to_cxhdl(ctrl);
+	s32 val = ctrl->val;
+	u32 props;
+	int err;
+
+	switch (ctrl->id) {
+	case V4L2_CID_MPEG_STREAM_VBI_FMT:
+		if (hdl->ops && hdl->ops->s_stream_vbi_fmt)
+			return hdl->ops->s_stream_vbi_fmt(hdl, val);
+		return 0;
+
+	case V4L2_CID_MPEG_VIDEO_ASPECT:
+		return cx2341x_hdl_api(hdl,
+			CX2341X_ENC_SET_ASPECT_RATIO, 1, val + 1);
+
+	case V4L2_CID_MPEG_VIDEO_GOP_CLOSURE:
+		return cx2341x_hdl_api(hdl, CX2341X_ENC_SET_GOP_CLOSURE, 1, val);
+
+	case V4L2_CID_MPEG_AUDIO_MUTE:
+		return cx2341x_hdl_api(hdl, CX2341X_ENC_MUTE_AUDIO, 1, val);
+
+	case V4L2_CID_MPEG_VIDEO_TEMPORAL_DECIMATION:
+		return cx2341x_hdl_api(hdl,
+			CX2341X_ENC_SET_FRAME_DROP_RATE, 1, val);
+
+	case V4L2_CID_MPEG_CX2341X_STREAM_INSERT_NAV_PACKETS:
+		return cx2341x_hdl_api(hdl, CX2341X_ENC_MISC, 2, 7, val);
+
+	case V4L2_CID_MPEG_AUDIO_SAMPLING_FREQ:
+		/* audio properties cluster */
+		props = (hdl->audio_sampling_freq->val << 0) |
+			(hdl->audio_mode->val << 8) |
+			(hdl->audio_mode_extension->val << 10) |
+			(hdl->audio_crc->val << 14);
+		if (hdl->audio_emphasis->val == V4L2_MPEG_AUDIO_EMPHASIS_CCITT_J17)
+			props |= 3 << 12;
+		else
+			props |= hdl->audio_emphasis->val << 12;
+
+		if (hdl->audio_encoding->val == V4L2_MPEG_AUDIO_ENCODING_AC3) {
+			props |=
+#if 1
+				/* Not sure if this MPEG Layer II setting is required */
+				((3 - V4L2_MPEG_AUDIO_ENCODING_LAYER_2) << 2) |
+#endif
+				(hdl->audio_ac3_bitrate->val << 4) |
+				(CX2341X_AUDIO_ENCODING_METHOD_AC3 << 28);
+		} else {
+			/* Assuming MPEG Layer II */
+			props |=
+				((3 - hdl->audio_encoding->val) << 2) |
+				((1 + hdl->audio_l2_bitrate->val) << 4);
+		}
+		err = cx2341x_hdl_api(hdl,
+				CX2341X_ENC_SET_AUDIO_PROPERTIES, 1, props);
+		if (err)
+			return err;
+
+		hdl->audio_properties = props;
+		if (hdl->audio_ac3_bitrate) {
+			int is_ac3 = hdl->audio_encoding->val ==
+						V4L2_MPEG_AUDIO_ENCODING_AC3;
+
+			v4l2_ctrl_activate(hdl->audio_ac3_bitrate, is_ac3);
+			v4l2_ctrl_activate(hdl->audio_l2_bitrate, !is_ac3);
+		}
+		v4l2_ctrl_activate(hdl->audio_mode_extension,
+			hdl->audio_mode->val == V4L2_MPEG_AUDIO_MODE_JOINT_STEREO);
+		if (cx2341x_neq(hdl->audio_sampling_freq) &&
+		    hdl->ops && hdl->ops->s_audio_sampling_freq)
+			return hdl->ops->s_audio_sampling_freq(hdl, hdl->audio_sampling_freq->val);
+		if (cx2341x_neq(hdl->audio_mode) &&
+		    hdl->ops && hdl->ops->s_audio_mode)
+			return hdl->ops->s_audio_mode(hdl, hdl->audio_mode->val);
+		return 0;
+
+	case V4L2_CID_MPEG_VIDEO_B_FRAMES:
+		/* video gop cluster */
+		return cx2341x_hdl_api(hdl, CX2341X_ENC_SET_GOP_PROPERTIES, 2,
+				hdl->video_gop_size->val,
+				hdl->video_b_frames->val + 1);
+
+	case V4L2_CID_MPEG_STREAM_TYPE:
+		/* stream type cluster */
+		err = cx2341x_hdl_api(hdl,
+			CX2341X_ENC_SET_STREAM_TYPE, 1, mpeg_stream_type[val]);
+		if (err)
+			return err;
+
+		err = cx2341x_hdl_api(hdl, CX2341X_ENC_SET_BIT_RATE, 5,
+				hdl->video_bitrate_mode->val,
+				hdl->video_bitrate->val,
+				hdl->video_bitrate_peak->val / 400, 0, 0);
+		if (err)
+			return err;
+
+		v4l2_ctrl_activate(hdl->video_bitrate_mode,
+			hdl->video_encoding->val != V4L2_MPEG_VIDEO_ENCODING_MPEG_1);
+		v4l2_ctrl_activate(hdl->video_bitrate_peak,
+			hdl->video_bitrate_mode->val != V4L2_MPEG_VIDEO_BITRATE_MODE_CBR);
+		if (cx2341x_neq(hdl->video_encoding) &&
+		    hdl->ops && hdl->ops->s_video_encoding)
+			return hdl->ops->s_video_encoding(hdl, hdl->video_encoding->val);
+		return 0;
+
+	case V4L2_CID_MPEG_VIDEO_MUTE:
+		/* video mute cluster */
+		return cx2341x_hdl_api(hdl, CX2341X_ENC_MUTE_VIDEO, 1,
+				hdl->video_mute->val |
+					(hdl->video_mute_yuv->val << 8));
+
+	case V4L2_CID_MPEG_CX2341X_VIDEO_SPATIAL_FILTER_MODE: {
+		int active_filter;
+
+		/* video filter mode */
+		err = cx2341x_hdl_api(hdl, CX2341X_ENC_SET_DNR_FILTER_MODE, 2,
+				hdl->video_spatial_filter_mode->val |
+					(hdl->video_temporal_filter_mode->val << 1),
+				hdl->video_median_filter_type->val);
+		if (err)
+			return err;
+
+		active_filter = hdl->video_spatial_filter_mode->val !=
+				V4L2_MPEG_CX2341X_VIDEO_SPATIAL_FILTER_MODE_AUTO;
+		v4l2_ctrl_activate(hdl->video_spatial_filter, active_filter);
+		v4l2_ctrl_activate(hdl->video_luma_spatial_filter_type, active_filter);
+		v4l2_ctrl_activate(hdl->video_chroma_spatial_filter_type, active_filter);
+		active_filter = hdl->video_temporal_filter_mode->val !=
+				V4L2_MPEG_CX2341X_VIDEO_TEMPORAL_FILTER_MODE_AUTO;
+		v4l2_ctrl_activate(hdl->video_temporal_filter, active_filter);
+		active_filter = hdl->video_median_filter_type->val !=
+				V4L2_MPEG_CX2341X_VIDEO_MEDIAN_FILTER_TYPE_OFF;
+		v4l2_ctrl_activate(hdl->video_luma_median_filter_bottom, active_filter);
+		v4l2_ctrl_activate(hdl->video_luma_median_filter_top, active_filter);
+		v4l2_ctrl_activate(hdl->video_chroma_median_filter_bottom, active_filter);
+		v4l2_ctrl_activate(hdl->video_chroma_median_filter_top, active_filter);
+		return 0;
+	}
+
+	case V4L2_CID_MPEG_CX2341X_VIDEO_LUMA_SPATIAL_FILTER_TYPE:
+		/* video filter type cluster */
+		return cx2341x_hdl_api(hdl,
+				CX2341X_ENC_SET_SPATIAL_FILTER_TYPE, 2,
+				hdl->video_luma_spatial_filter_type->val,
+				hdl->video_chroma_spatial_filter_type->val);
+
+	case V4L2_CID_MPEG_CX2341X_VIDEO_SPATIAL_FILTER:
+		/* video filter cluster */
+		return cx2341x_hdl_api(hdl, CX2341X_ENC_SET_DNR_FILTER_PROPS, 2,
+				hdl->video_spatial_filter->val,
+				hdl->video_temporal_filter->val);
+
+	case V4L2_CID_MPEG_CX2341X_VIDEO_LUMA_MEDIAN_FILTER_TOP:
+		/* video median cluster */
+		return cx2341x_hdl_api(hdl, CX2341X_ENC_SET_CORING_LEVELS, 4,
+				hdl->video_luma_median_filter_bottom->val,
+				hdl->video_luma_median_filter_top->val,
+				hdl->video_chroma_median_filter_bottom->val,
+				hdl->video_chroma_median_filter_top->val);
+	}
+	return -EINVAL;
+}
+
+static const struct v4l2_ctrl_ops cx2341x_ops = {
+	.try_ctrl = cx2341x_try_ctrl,
+	.s_ctrl = cx2341x_s_ctrl,
+};
+
+static struct v4l2_ctrl *cx2341x_ctrl_new_custom(struct v4l2_ctrl_handler *hdl,
+			u32 id, s32 min, s32 max, s32 step, s32 def)
+{
+	struct v4l2_ctrl_config cfg;
+
+	cx2341x_ctrl_fill(id, &cfg.name, &cfg.type, &min, &max, &step, &def, &cfg.flags);
+	cfg.ops = &cx2341x_ops;
+	cfg.id = id;
+	cfg.min = min;
+	cfg.max = max;
+	cfg.def = def;
+	if (cfg.type == V4L2_CTRL_TYPE_MENU) {
+		cfg.step = 0;
+		cfg.menu_skip_mask = step;
+		cfg.qmenu = cx2341x_get_menu(id);
+	} else {
+		cfg.step = step;
+		cfg.menu_skip_mask = 0;
+	}
+	return v4l2_ctrl_new_custom(hdl, &cfg, NULL);
+}
+
+static struct v4l2_ctrl *cx2341x_ctrl_new_std(struct v4l2_ctrl_handler *hdl,
+			u32 id, s32 min, s32 max, s32 step, s32 def)
+{
+	return v4l2_ctrl_new_std(hdl, &cx2341x_ops, id, min, max, step, def);
+}
+
+static struct v4l2_ctrl *cx2341x_ctrl_new_menu(struct v4l2_ctrl_handler *hdl,
+			u32 id, s32 max, s32 mask, s32 def)
+{
+	return v4l2_ctrl_new_std_menu(hdl, &cx2341x_ops, id, max, mask, def);
+}
+
+int cx2341x_handler_init(struct cx2341x_handler *cxhdl,
+			 unsigned nr_of_controls_hint)
+{
+	struct v4l2_ctrl_handler *hdl = &cxhdl->hdl;
+	u32 caps = cxhdl->capabilities;
+	int has_sliced_vbi = caps & CX2341X_CAP_HAS_SLICED_VBI;
+	int has_ac3 = caps & CX2341X_CAP_HAS_AC3;
+	int has_ts = caps & CX2341X_CAP_HAS_TS;
+
+	cxhdl->width = 720;
+	cxhdl->height = 480;
+
+	v4l2_ctrl_handler_init(hdl, nr_of_controls_hint);
+
+	/* Add controls in ascending control ID order for fastest
+	   insertion time. */
+	cxhdl->stream_type = cx2341x_ctrl_new_menu(hdl,
+			V4L2_CID_MPEG_STREAM_TYPE,
+			V4L2_MPEG_STREAM_TYPE_MPEG2_SVCD, has_ts ? 0 : 2,
+			V4L2_MPEG_STREAM_TYPE_MPEG2_PS);
+	cxhdl->stream_vbi_fmt = cx2341x_ctrl_new_menu(hdl,
+			V4L2_CID_MPEG_STREAM_VBI_FMT,
+			V4L2_MPEG_STREAM_VBI_FMT_IVTV, has_sliced_vbi ? 0 : 2,
+			V4L2_MPEG_STREAM_VBI_FMT_NONE);
+	cxhdl->audio_sampling_freq = cx2341x_ctrl_new_menu(hdl,
+			V4L2_CID_MPEG_AUDIO_SAMPLING_FREQ,
+			V4L2_MPEG_AUDIO_SAMPLING_FREQ_32000, 0,
+			V4L2_MPEG_AUDIO_SAMPLING_FREQ_48000);
+	cxhdl->audio_encoding = cx2341x_ctrl_new_menu(hdl,
+			V4L2_CID_MPEG_AUDIO_ENCODING,
+			V4L2_MPEG_AUDIO_ENCODING_AC3, has_ac3 ? ~0x12 : ~0x2,
+			V4L2_MPEG_AUDIO_ENCODING_LAYER_2);
+	cxhdl->audio_l2_bitrate = cx2341x_ctrl_new_menu(hdl,
+			V4L2_CID_MPEG_AUDIO_L2_BITRATE,
+			V4L2_MPEG_AUDIO_L2_BITRATE_384K, 0x1ff,
+			V4L2_MPEG_AUDIO_L2_BITRATE_224K);
+	cxhdl->audio_mode = cx2341x_ctrl_new_menu(hdl,
+			V4L2_CID_MPEG_AUDIO_MODE,
+			V4L2_MPEG_AUDIO_MODE_MONO, 0,
+			V4L2_MPEG_AUDIO_MODE_STEREO);
+	cxhdl->audio_mode_extension = cx2341x_ctrl_new_menu(hdl,
+			V4L2_CID_MPEG_AUDIO_MODE_EXTENSION,
+			V4L2_MPEG_AUDIO_MODE_EXTENSION_BOUND_16, 0,
+			V4L2_MPEG_AUDIO_MODE_EXTENSION_BOUND_4);
+	cxhdl->audio_emphasis = cx2341x_ctrl_new_menu(hdl,
+			V4L2_CID_MPEG_AUDIO_EMPHASIS,
+			V4L2_MPEG_AUDIO_EMPHASIS_CCITT_J17, 0,
+			V4L2_MPEG_AUDIO_EMPHASIS_NONE);
+	cxhdl->audio_crc = cx2341x_ctrl_new_menu(hdl,
+			V4L2_CID_MPEG_AUDIO_CRC,
+			V4L2_MPEG_AUDIO_CRC_CRC16, 0,
+			V4L2_MPEG_AUDIO_CRC_NONE);
+
+	cx2341x_ctrl_new_std(hdl, V4L2_CID_MPEG_AUDIO_MUTE, 0, 1, 1, 0);
+	if (has_ac3)
+		cxhdl->audio_ac3_bitrate = cx2341x_ctrl_new_menu(hdl,
+				V4L2_CID_MPEG_AUDIO_AC3_BITRATE,
+				V4L2_MPEG_AUDIO_AC3_BITRATE_448K, 0x03,
+				V4L2_MPEG_AUDIO_AC3_BITRATE_224K);
+	cxhdl->video_encoding = cx2341x_ctrl_new_menu(hdl,
+			V4L2_CID_MPEG_VIDEO_ENCODING,
+			V4L2_MPEG_VIDEO_ENCODING_MPEG_2, 0,
+			V4L2_MPEG_VIDEO_ENCODING_MPEG_2);
+	cx2341x_ctrl_new_menu(hdl,
+			V4L2_CID_MPEG_VIDEO_ASPECT,
+			V4L2_MPEG_VIDEO_ASPECT_221x100, 0,
+			V4L2_MPEG_VIDEO_ASPECT_4x3);
+	cxhdl->video_b_frames = cx2341x_ctrl_new_std(hdl,
+			V4L2_CID_MPEG_VIDEO_B_FRAMES, 0, 33, 1, 2);
+	cxhdl->video_gop_size = cx2341x_ctrl_new_std(hdl,
+			V4L2_CID_MPEG_VIDEO_GOP_SIZE,
+			1, 34, 1, cxhdl->is_50hz ? 12 : 15);
+	cx2341x_ctrl_new_std(hdl, V4L2_CID_MPEG_VIDEO_GOP_CLOSURE, 0, 1, 1, 1);
+	cxhdl->video_bitrate_mode = cx2341x_ctrl_new_menu(hdl,
+			V4L2_CID_MPEG_VIDEO_BITRATE_MODE,
+			V4L2_MPEG_VIDEO_BITRATE_MODE_CBR, 0,
+			V4L2_MPEG_VIDEO_BITRATE_MODE_VBR);
+	cxhdl->video_bitrate = cx2341x_ctrl_new_std(hdl,
+			V4L2_CID_MPEG_VIDEO_BITRATE,
+			0, 27000000, 1, 6000000);
+	cxhdl->video_bitrate_peak = cx2341x_ctrl_new_std(hdl,
+			V4L2_CID_MPEG_VIDEO_BITRATE_PEAK,
+			0, 27000000, 1, 8000000);
+	cx2341x_ctrl_new_std(hdl,
+			V4L2_CID_MPEG_VIDEO_TEMPORAL_DECIMATION, 0, 255, 1, 0);
+	cxhdl->video_mute = cx2341x_ctrl_new_std(hdl,
+			V4L2_CID_MPEG_VIDEO_MUTE, 0, 1, 1, 0);
+	cxhdl->video_mute_yuv = cx2341x_ctrl_new_std(hdl,
+			V4L2_CID_MPEG_VIDEO_MUTE_YUV, 0, 0xffffff, 1, 0x008080);
+
+	/* CX23415/6 specific */
+	cxhdl->video_spatial_filter_mode = cx2341x_ctrl_new_custom(hdl,
+			V4L2_CID_MPEG_CX2341X_VIDEO_SPATIAL_FILTER_MODE,
+			V4L2_MPEG_CX2341X_VIDEO_SPATIAL_FILTER_MODE_MANUAL,
+			V4L2_MPEG_CX2341X_VIDEO_SPATIAL_FILTER_MODE_AUTO, 0,
+			V4L2_MPEG_CX2341X_VIDEO_SPATIAL_FILTER_MODE_MANUAL);
+	cxhdl->video_spatial_filter = cx2341x_ctrl_new_custom(hdl,
+			V4L2_CID_MPEG_CX2341X_VIDEO_SPATIAL_FILTER,
+			0, 15, 1, 0);
+	cxhdl->video_luma_spatial_filter_type = cx2341x_ctrl_new_custom(hdl,
+			V4L2_CID_MPEG_CX2341X_VIDEO_LUMA_SPATIAL_FILTER_TYPE,
+			V4L2_MPEG_CX2341X_VIDEO_LUMA_SPATIAL_FILTER_TYPE_OFF,
+			V4L2_MPEG_CX2341X_VIDEO_LUMA_SPATIAL_FILTER_TYPE_2D_SYM_NON_SEPARABLE,
+			0,
+			V4L2_MPEG_CX2341X_VIDEO_LUMA_SPATIAL_FILTER_TYPE_1D_HOR);
+	cxhdl->video_chroma_spatial_filter_type = cx2341x_ctrl_new_custom(hdl,
+			V4L2_CID_MPEG_CX2341X_VIDEO_CHROMA_SPATIAL_FILTER_TYPE,
+			V4L2_MPEG_CX2341X_VIDEO_CHROMA_SPATIAL_FILTER_TYPE_OFF,
+			V4L2_MPEG_CX2341X_VIDEO_CHROMA_SPATIAL_FILTER_TYPE_1D_HOR,
+			0,
+			V4L2_MPEG_CX2341X_VIDEO_CHROMA_SPATIAL_FILTER_TYPE_1D_HOR);
+	cxhdl->video_temporal_filter_mode = cx2341x_ctrl_new_custom(hdl,
+			V4L2_CID_MPEG_CX2341X_VIDEO_TEMPORAL_FILTER_MODE,
+			V4L2_MPEG_CX2341X_VIDEO_TEMPORAL_FILTER_MODE_MANUAL,
+			V4L2_MPEG_CX2341X_VIDEO_TEMPORAL_FILTER_MODE_AUTO,
+			0,
+			V4L2_MPEG_CX2341X_VIDEO_TEMPORAL_FILTER_MODE_MANUAL);
+	cxhdl->video_temporal_filter = cx2341x_ctrl_new_custom(hdl,
+			V4L2_CID_MPEG_CX2341X_VIDEO_TEMPORAL_FILTER,
+			0, 31, 1, 8);
+	cxhdl->video_median_filter_type = cx2341x_ctrl_new_custom(hdl,
+			V4L2_CID_MPEG_CX2341X_VIDEO_MEDIAN_FILTER_TYPE,
+			V4L2_MPEG_CX2341X_VIDEO_MEDIAN_FILTER_TYPE_OFF,
+			V4L2_MPEG_CX2341X_VIDEO_MEDIAN_FILTER_TYPE_DIAG,
+			0,
+			V4L2_MPEG_CX2341X_VIDEO_MEDIAN_FILTER_TYPE_OFF);
+	cxhdl->video_luma_median_filter_bottom = cx2341x_ctrl_new_custom(hdl,
+			V4L2_CID_MPEG_CX2341X_VIDEO_LUMA_MEDIAN_FILTER_BOTTOM,
+			0, 255, 1, 0);
+	cxhdl->video_luma_median_filter_top = cx2341x_ctrl_new_custom(hdl,
+			V4L2_CID_MPEG_CX2341X_VIDEO_LUMA_MEDIAN_FILTER_TOP,
+			0, 255, 1, 255);
+	cxhdl->video_chroma_median_filter_bottom = cx2341x_ctrl_new_custom(hdl,
+			V4L2_CID_MPEG_CX2341X_VIDEO_CHROMA_MEDIAN_FILTER_BOTTOM,
+			0, 255, 1, 0);
+	cxhdl->video_chroma_median_filter_top = cx2341x_ctrl_new_custom(hdl,
+			V4L2_CID_MPEG_CX2341X_VIDEO_CHROMA_MEDIAN_FILTER_TOP,
+			0, 255, 1, 255);
+	cx2341x_ctrl_new_custom(hdl, V4L2_CID_MPEG_CX2341X_STREAM_INSERT_NAV_PACKETS,
+			0, 1, 1, 0);
+
+	if (hdl->error) {
+		int err = hdl->error;
+
+		v4l2_ctrl_handler_free(hdl);
+		return err;
+	}
+
+	v4l2_ctrl_cluster(8, &cxhdl->audio_sampling_freq);
+	v4l2_ctrl_cluster(2, &cxhdl->video_b_frames);
+	v4l2_ctrl_cluster(5, &cxhdl->stream_type);
+	v4l2_ctrl_cluster(2, &cxhdl->video_mute);
+	v4l2_ctrl_cluster(3, &cxhdl->video_spatial_filter_mode);
+	v4l2_ctrl_cluster(2, &cxhdl->video_luma_spatial_filter_type);
+	v4l2_ctrl_cluster(2, &cxhdl->video_spatial_filter);
+	v4l2_ctrl_cluster(4, &cxhdl->video_luma_median_filter_top);
+
+	return 0;
+}
+EXPORT_SYMBOL(cx2341x_handler_init);
+
+void cx2341x_handler_set_50hz(struct cx2341x_handler *cxhdl, int is_50hz)
+{
+	cxhdl->is_50hz = is_50hz;
+	cxhdl->video_gop_size->default_value = cxhdl->is_50hz ? 12 : 15;
+}
+EXPORT_SYMBOL(cx2341x_handler_set_50hz);
+
+int cx2341x_handler_setup(struct cx2341x_handler *cxhdl)
+{
+	int h = cxhdl->height;
+	int w = cxhdl->width;
+	int err;
+
+	err = cx2341x_hdl_api(cxhdl, CX2341X_ENC_SET_OUTPUT_PORT, 2, cxhdl->port, 0);
+	if (err)
+		return err;
+	err = cx2341x_hdl_api(cxhdl, CX2341X_ENC_SET_FRAME_RATE, 1, cxhdl->is_50hz);
+	if (err)
+		return err;
+
+	if (v4l2_ctrl_g_ctrl(cxhdl->video_encoding) == V4L2_MPEG_VIDEO_ENCODING_MPEG_1) {
+		w /= 2;
+		h /= 2;
+	}
+	err = cx2341x_hdl_api(cxhdl, CX2341X_ENC_SET_FRAME_SIZE, 2, h, w);
+	if (err)
+		return err;
+	return v4l2_ctrl_handler_setup(&cxhdl->hdl);
+}
+EXPORT_SYMBOL(cx2341x_handler_setup);
+
+void cx2341x_handler_set_busy(struct cx2341x_handler *cxhdl, int busy)
+{
+	v4l2_ctrl_grab(cxhdl->audio_sampling_freq, busy);
+	v4l2_ctrl_grab(cxhdl->audio_encoding, busy);
+	v4l2_ctrl_grab(cxhdl->audio_l2_bitrate, busy);
+	v4l2_ctrl_grab(cxhdl->audio_ac3_bitrate, busy);
+	v4l2_ctrl_grab(cxhdl->stream_vbi_fmt, busy);
+	v4l2_ctrl_grab(cxhdl->stream_type, busy);
+	v4l2_ctrl_grab(cxhdl->video_bitrate_mode, busy);
+	v4l2_ctrl_grab(cxhdl->video_bitrate, busy);
+	v4l2_ctrl_grab(cxhdl->video_bitrate_peak, busy);
+}
+EXPORT_SYMBOL(cx2341x_handler_set_busy);

drivers/media/video/cx23885/Kconfig

@@ -5,7 +5,7 @@ config VIDEO_CX23885
 	select VIDEO_BTCX
 	select VIDEO_TUNER
 	select VIDEO_TVEEPROM
-	select VIDEO_IR
+	select IR_CORE
 	select VIDEOBUF_DVB
 	select VIDEOBUF_DMA_SG
 	select VIDEO_CX25840

drivers/media/video/cx23885/Makefile

@@ -1,7 +1,8 @@
 cx23885-objs	:= cx23885-cards.o cx23885-video.o cx23885-vbi.o \
 		    cx23885-core.o cx23885-i2c.o cx23885-dvb.o cx23885-417.o \
-		    cx23885-ioctl.o cx23885-ir.o cx23885-input.o cx23888-ir.o \
-		    netup-init.o cimax2.o netup-eeprom.o cx23885-f300.o
+		    cx23885-ioctl.o cx23885-ir.o cx23885-av.o cx23885-input.o \
+		    cx23888-ir.o netup-init.o cimax2.o netup-eeprom.o \
+		    cx23885-f300.o
 
 obj-$(CONFIG_VIDEO_CX23885) += cx23885.o
 

drivers/media/video/cx23885/cx23885-av.c

@@ -0,0 +1,35 @@
+/*
+ *  Driver for the Conexant CX23885/7/8 PCIe bridge
+ *
+ *  AV device support routines - non-input, non-vl42_subdev routines
+ *
+ *  Copyright (C) 2010  Andy Walls <awalls@md.metrocast.net>
+ *
+ *  This program is free software; you can redistribute it and/or
+ *  modify it under the terms of the GNU General Public License
+ *  as published by the Free Software Foundation; either version 2
+ *  of the License, or (at your option) any later version.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License
+ *  along with this program; if not, write to the Free Software
+ *  Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+ *  02110-1301, USA.
+ */
+
+#include "cx23885.h"
+
+void cx23885_av_work_handler(struct work_struct *work)
+{
+	struct cx23885_dev *dev =
+			   container_of(work, struct cx23885_dev, cx25840_work);
+	bool handled;
+
+	v4l2_subdev_call(dev->sd_cx25840, core, interrupt_service_routine,
+			 PCI_MSK_AV_CORE, &handled);
+	cx23885_irq_enable(dev, PCI_MSK_AV_CORE);
+}

drivers/media/video/cx23885/cx23885-av.h

@@ -0,0 +1,27 @@
+/*
+ *  Driver for the Conexant CX23885/7/8 PCIe bridge
+ *
+ *  AV device support routines - non-input, non-vl42_subdev routines
+ *
+ *  Copyright (C) 2010  Andy Walls <awalls@md.metrocast.net>
+ *
+ *  This program is free software; you can redistribute it and/or
+ *  modify it under the terms of the GNU General Public License
+ *  as published by the Free Software Foundation; either version 2
+ *  of the License, or (at your option) any later version.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License
+ *  along with this program; if not, write to the Free Software
+ *  Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+ *  02110-1301, USA.
+ */
+
+#ifndef _CX23885_AV_H_
+#define _CX23885_AV_H_
+void cx23885_av_work_handler(struct work_struct *work);
+#endif

drivers/media/video/cx23885/cx23885-cards.c

@@ -30,6 +30,16 @@
 #include "netup-init.h"
 #include "cx23888-ir.h"
 
+static unsigned int enable_885_ir;
+module_param(enable_885_ir, int, 0644);
+MODULE_PARM_DESC(enable_885_ir,
+		 "Enable integrated IR controller for supported\n"
+		 "\t\t    CX2388[57] boards that are wired for it:\n"
+		 "\t\t\tHVR-1250 (reported safe)\n"
+		 "\t\t\tTeVii S470 (reported unsafe)\n"
+		 "\t\t    This can cause an interrupt storm with some cards.\n"
+		 "\t\t    Default: 0 [Disabled]");
+
 /* ------------------------------------------------------------------ */
 /* board config info                                                  */
 
@@ -626,6 +636,9 @@ static void hauppauge_eeprom(struct cx23885_dev *dev, u8 *eeprom_data)
 	case 79101:
 		/* WinTV-HVR1250 (PCIe, Retail, IR, half height,
 			ATSC and Basic analog */
+	case 79501:
+		/* WinTV-HVR1250 (PCIe, No IR, half height,
+			ATSC [at least] and Basic analog) */
 	case 79561:
 		/* WinTV-HVR1250 (PCIe, OEM, No IR, half height,
 			ATSC and Basic analog */
@@ -959,9 +972,37 @@ void cx23885_gpio_setup(struct cx23885_dev *dev)
 
 int cx23885_ir_init(struct cx23885_dev *dev)
 {
+	static struct v4l2_subdev_io_pin_config ir_rxtx_pin_cfg[] = {
+		{
+			.flags	  = V4L2_SUBDEV_IO_PIN_INPUT,
+			.pin	  = CX23885_PIN_IR_RX_GPIO19,
+			.function = CX23885_PAD_IR_RX,
+			.value	  = 0,
+			.strength = CX25840_PIN_DRIVE_MEDIUM,
+		}, {
+			.flags	  = V4L2_SUBDEV_IO_PIN_OUTPUT,
+			.pin	  = CX23885_PIN_IR_TX_GPIO20,
+			.function = CX23885_PAD_IR_TX,
+			.value	  = 0,
+			.strength = CX25840_PIN_DRIVE_MEDIUM,
+		}
+	};
+	const size_t ir_rxtx_pin_cfg_count = ARRAY_SIZE(ir_rxtx_pin_cfg);
+
+	static struct v4l2_subdev_io_pin_config ir_rx_pin_cfg[] = {
+		{
+			.flags	  = V4L2_SUBDEV_IO_PIN_INPUT,
+			.pin	  = CX23885_PIN_IR_RX_GPIO19,
+			.function = CX23885_PAD_IR_RX,
+			.value	  = 0,
+			.strength = CX25840_PIN_DRIVE_MEDIUM,
+		}
+	};
+	const size_t ir_rx_pin_cfg_count = ARRAY_SIZE(ir_rx_pin_cfg);
+
+	struct v4l2_subdev_ir_parameters params;
 	int ret = 0;
 	switch (dev->board) {
-	case CX23885_BOARD_HAUPPAUGE_HVR1250:
 	case CX23885_BOARD_HAUPPAUGE_HVR1500:
 	case CX23885_BOARD_HAUPPAUGE_HVR1500Q:
 	case CX23885_BOARD_HAUPPAUGE_HVR1800:
@@ -979,7 +1020,41 @@ int cx23885_ir_init(struct cx23885_dev *dev)
 		if (ret)
 			break;
 		dev->sd_ir = cx23885_find_hw(dev, CX23885_HW_888_IR);
-		dev->pci_irqmask |= PCI_MSK_IR;
+		v4l2_subdev_call(dev->sd_cx25840, core, s_io_pin_config,
+				 ir_rxtx_pin_cfg_count, ir_rxtx_pin_cfg);
+		/*
+		 * For these boards we need to invert the Tx output via the
+		 * IR controller to have the LED off while idle
+		 */
+		v4l2_subdev_call(dev->sd_ir, ir, tx_g_parameters, &params);
+		params.enable = false;
+		params.shutdown = false;
+		params.invert_level = true;
+		v4l2_subdev_call(dev->sd_ir, ir, tx_s_parameters, &params);
+		params.shutdown = true;
+		v4l2_subdev_call(dev->sd_ir, ir, tx_s_parameters, &params);
+		break;
+	case CX23885_BOARD_TEVII_S470:
+		if (!enable_885_ir)
+			break;
+		dev->sd_ir = cx23885_find_hw(dev, CX23885_HW_AV_CORE);
+		if (dev->sd_ir == NULL) {
+			ret = -ENODEV;
+			break;
+		}
+		v4l2_subdev_call(dev->sd_cx25840, core, s_io_pin_config,
+				 ir_rx_pin_cfg_count, ir_rx_pin_cfg);
+		break;
+	case CX23885_BOARD_HAUPPAUGE_HVR1250:
+		if (!enable_885_ir)
+			break;
+		dev->sd_ir = cx23885_find_hw(dev, CX23885_HW_AV_CORE);
+		if (dev->sd_ir == NULL) {
+			ret = -ENODEV;
+			break;
+		}
+		v4l2_subdev_call(dev->sd_cx25840, core, s_io_pin_config,
+				 ir_rxtx_pin_cfg_count, ir_rxtx_pin_cfg);
 		break;
 	case CX23885_BOARD_DVICO_FUSIONHDTV_DVB_T_DUAL_EXP:
 		request_module("ir-kbd-i2c");
@@ -994,11 +1069,16 @@ void cx23885_ir_fini(struct cx23885_dev *dev)
 	switch (dev->board) {
 	case CX23885_BOARD_HAUPPAUGE_HVR1850:
 	case CX23885_BOARD_HAUPPAUGE_HVR1290:
-		dev->pci_irqmask &= ~PCI_MSK_IR;
-		cx_clear(PCI_INT_MSK, PCI_MSK_IR);
+		cx23885_irq_remove(dev, PCI_MSK_IR);
 		cx23888_ir_remove(dev);
 		dev->sd_ir = NULL;
 		break;
+	case CX23885_BOARD_TEVII_S470:
+	case CX23885_BOARD_HAUPPAUGE_HVR1250:
+		cx23885_irq_remove(dev, PCI_MSK_AV_CORE);
+		/* sd_ir is a duplicate pointer to the AV Core, just clear it */
+		dev->sd_ir = NULL;
+		break;
 	}
 }
 
@@ -1007,8 +1087,13 @@ void cx23885_ir_pci_int_enable(struct cx23885_dev *dev)
 	switch (dev->board) {
 	case CX23885_BOARD_HAUPPAUGE_HVR1850:
 	case CX23885_BOARD_HAUPPAUGE_HVR1290:
-		if (dev->sd_ir && (dev->pci_irqmask & PCI_MSK_IR))
-			cx_set(PCI_INT_MSK, PCI_MSK_IR);
+		if (dev->sd_ir)
+			cx23885_irq_add_enable(dev, PCI_MSK_IR);
+		break;
+	case CX23885_BOARD_TEVII_S470:
+	case CX23885_BOARD_HAUPPAUGE_HVR1250:
+		if (dev->sd_ir)
+			cx23885_irq_add_enable(dev, PCI_MSK_AV_CORE);
 		break;
 	}
 }
@@ -1028,6 +1113,13 @@ void cx23885_card_setup(struct cx23885_dev *dev)
 
 	switch (dev->board) {
 	case CX23885_BOARD_HAUPPAUGE_HVR1250:
+		if (dev->i2c_bus[0].i2c_rc == 0) {
+			if (eeprom[0x80] != 0x84)
+				hauppauge_eeprom(dev, eeprom+0xc0);
+			else
+				hauppauge_eeprom(dev, eeprom+0x80);
+		}
+		break;
 	case CX23885_BOARD_HAUPPAUGE_HVR1500:
 	case CX23885_BOARD_HAUPPAUGE_HVR1500Q:
 	case CX23885_BOARD_HAUPPAUGE_HVR1400:
@@ -1136,6 +1228,11 @@ void cx23885_card_setup(struct cx23885_dev *dev)
 	 * loaded, ensure this happens.
 	 */
 	switch (dev->board) {
+	case CX23885_BOARD_TEVII_S470:
+	case CX23885_BOARD_HAUPPAUGE_HVR1250:
+		/* Currently only enabled for the integrated IR controller */
+		if (!enable_885_ir)
+			break;
 	case CX23885_BOARD_HAUPPAUGE_HVR1800:
 	case CX23885_BOARD_HAUPPAUGE_HVR1800lp:
 	case CX23885_BOARD_HAUPPAUGE_HVR1700:
@@ -1151,7 +1248,10 @@ void cx23885_card_setup(struct cx23885_dev *dev)
 		dev->sd_cx25840 = v4l2_i2c_new_subdev(&dev->v4l2_dev,
 				&dev->i2c_bus[2].i2c_adap,
 				"cx25840", "cx25840", 0x88 >> 1, NULL);
-		v4l2_subdev_call(dev->sd_cx25840, core, load_fw);
+		if (dev->sd_cx25840) {
+			dev->sd_cx25840->grp_id = CX23885_HW_AV_CORE;
+			v4l2_subdev_call(dev->sd_cx25840, core, load_fw);
+		}
 		break;
 	}
 

drivers/media/video/cx23885/cx23885-core.c

@@ -34,6 +34,7 @@
 #include "cimax2.h"
 #include "cx23888-ir.h"
 #include "cx23885-ir.h"
+#include "cx23885-av.h"
 #include "cx23885-input.h"
 
 MODULE_DESCRIPTION("Driver for cx23885 based TV cards");
@@ -299,6 +300,83 @@ static struct sram_channel cx23887_sram_channels[] = {
 	},
 };
 
+void cx23885_irq_add(struct cx23885_dev *dev, u32 mask)
+{
+	unsigned long flags;
+	spin_lock_irqsave(&dev->pci_irqmask_lock, flags);
+
+	dev->pci_irqmask |= mask;
+
+	spin_unlock_irqrestore(&dev->pci_irqmask_lock, flags);
+}
+
+void cx23885_irq_add_enable(struct cx23885_dev *dev, u32 mask)
+{
+	unsigned long flags;
+	spin_lock_irqsave(&dev->pci_irqmask_lock, flags);
+
+	dev->pci_irqmask |= mask;
+	cx_set(PCI_INT_MSK, mask);
+
+	spin_unlock_irqrestore(&dev->pci_irqmask_lock, flags);
+}
+
+void cx23885_irq_enable(struct cx23885_dev *dev, u32 mask)
+{
+	u32 v;
+	unsigned long flags;
+	spin_lock_irqsave(&dev->pci_irqmask_lock, flags);
+
+	v = mask & dev->pci_irqmask;
+	if (v)
+		cx_set(PCI_INT_MSK, v);
+
+	spin_unlock_irqrestore(&dev->pci_irqmask_lock, flags);
+}
+
+static inline void cx23885_irq_enable_all(struct cx23885_dev *dev)
+{
+	cx23885_irq_enable(dev, 0xffffffff);
+}
+
+void cx23885_irq_disable(struct cx23885_dev *dev, u32 mask)
+{
+	unsigned long flags;
+	spin_lock_irqsave(&dev->pci_irqmask_lock, flags);
+
+	cx_clear(PCI_INT_MSK, mask);
+
+	spin_unlock_irqrestore(&dev->pci_irqmask_lock, flags);
+}
+
+static inline void cx23885_irq_disable_all(struct cx23885_dev *dev)
+{
+	cx23885_irq_disable(dev, 0xffffffff);
+}
+
+void cx23885_irq_remove(struct cx23885_dev *dev, u32 mask)
+{
+	unsigned long flags;
+	spin_lock_irqsave(&dev->pci_irqmask_lock, flags);
+
+	dev->pci_irqmask &= ~mask;
+	cx_clear(PCI_INT_MSK, mask);
+
+	spin_unlock_irqrestore(&dev->pci_irqmask_lock, flags);
+}
+
+static u32 cx23885_irq_get_mask(struct cx23885_dev *dev)
+{
+	u32 v;
+	unsigned long flags;
+	spin_lock_irqsave(&dev->pci_irqmask_lock, flags);
+
+	v = cx_read(PCI_INT_MSK);
+
+	spin_unlock_irqrestore(&dev->pci_irqmask_lock, flags);
+	return v;
+}
+
 static int cx23885_risc_decode(u32 risc)
 {
 	static char *instr[16] = {
@@ -548,7 +626,7 @@ static void cx23885_shutdown(struct cx23885_dev *dev)
 	cx_write(UART_CTL, 0);
 
 	/* Disable Interrupts */
-	cx_write(PCI_INT_MSK, 0);
+	cx23885_irq_disable_all(dev);
 	cx_write(VID_A_INT_MSK, 0);
 	cx_write(VID_B_INT_MSK, 0);
 	cx_write(VID_C_INT_MSK, 0);
@@ -774,6 +852,8 @@ static int cx23885_dev_setup(struct cx23885_dev *dev)
 {
 	int i;
 
+	spin_lock_init(&dev->pci_irqmask_lock);
+
 	mutex_init(&dev->lock);
 	mutex_init(&dev->gpio_lock);
 
@@ -820,9 +900,9 @@ static int cx23885_dev_setup(struct cx23885_dev *dev)
 
 	dev->pci_bus  = dev->pci->bus->number;
 	dev->pci_slot = PCI_SLOT(dev->pci->devfn);
-	dev->pci_irqmask = 0x001f00;
+	cx23885_irq_add(dev, 0x001f00);
 	if (cx23885_boards[dev->board].cimax > 0)
-		dev->pci_irqmask |= 0x01800000; /* for CiMaxes */
+		cx23885_irq_add(dev, 0x01800000); /* for CiMaxes */
 
 	/* External Master 1 Bus */
 	dev->i2c_bus[0].nr = 0;
@@ -1156,7 +1236,7 @@ static void cx23885_tsport_reg_dump(struct cx23885_tsport *port)
 	dprintk(1, "%s() DEV_CNTRL2               0x%08X\n", __func__,
 		cx_read(DEV_CNTRL2));
 	dprintk(1, "%s() PCI_INT_MSK              0x%08X\n", __func__,
-		cx_read(PCI_INT_MSK));
+		cx23885_irq_get_mask(dev));
 	dprintk(1, "%s() AUD_INT_INT_MSK          0x%08X\n", __func__,
 		cx_read(AUDIO_INT_INT_MSK));
 	dprintk(1, "%s() AUD_INT_DMA_CTL          0x%08X\n", __func__,
@@ -1292,7 +1372,8 @@ static int cx23885_start_dma(struct cx23885_tsport *port,
 		dprintk(1, "%s() enabling TS int's and DMA\n", __func__);
 		cx_set(port->reg_ts_int_msk,  port->ts_int_msk_val);
 		cx_set(port->reg_dma_ctl, port->dma_ctl_val);
-		cx_set(PCI_INT_MSK, dev->pci_irqmask | port->pci_irqmask);
+		cx23885_irq_add(dev, port->pci_irqmask);
+		cx23885_irq_enable_all(dev);
 		break;
 	default:
 		BUG();
@@ -1650,10 +1731,10 @@ static irqreturn_t cx23885_irq(int irq, void *dev_id)
 	u32 ts1_status, ts1_mask;
 	u32 ts2_status, ts2_mask;
 	int vida_count = 0, ts1_count = 0, ts2_count = 0, handled = 0;
-	bool ir_handled = false;
+	bool subdev_handled;
 
 	pci_status = cx_read(PCI_INT_STAT);
-	pci_mask = cx_read(PCI_INT_MSK);
+	pci_mask = cx23885_irq_get_mask(dev);
 	vida_status = cx_read(VID_A_INT_STAT);
 	vida_mask = cx_read(VID_A_INT_MSK);
 	ts1_status = cx_read(VID_B_INT_STAT);
@@ -1681,7 +1762,7 @@ static irqreturn_t cx23885_irq(int irq, void *dev_id)
 			  PCI_MSK_VID_C   | PCI_MSK_VID_B   | PCI_MSK_VID_A   |
 			  PCI_MSK_AUD_INT | PCI_MSK_AUD_EXT |
 			  PCI_MSK_GPIO0   | PCI_MSK_GPIO1   |
-			  PCI_MSK_IR)) {
+			  PCI_MSK_AV_CORE | PCI_MSK_IR)) {
 
 		if (pci_status & PCI_MSK_RISC_RD)
 			dprintk(7, " (PCI_MSK_RISC_RD   0x%08x)\n",
@@ -1731,6 +1812,10 @@ static irqreturn_t cx23885_irq(int irq, void *dev_id)
 			dprintk(7, " (PCI_MSK_GPIO1     0x%08x)\n",
 				PCI_MSK_GPIO1);
 
+		if (pci_status & PCI_MSK_AV_CORE)
+			dprintk(7, " (PCI_MSK_AV_CORE   0x%08x)\n",
+				PCI_MSK_AV_CORE);
+
 		if (pci_status & PCI_MSK_IR)
 			dprintk(7, " (PCI_MSK_IR        0x%08x)\n",
 				PCI_MSK_IR);
@@ -1765,12 +1850,22 @@ static irqreturn_t cx23885_irq(int irq, void *dev_id)
 		handled += cx23885_video_irq(dev, vida_status);
 
 	if (pci_status & PCI_MSK_IR) {
-		v4l2_subdev_call(dev->sd_ir, ir, interrupt_service_routine,
-				 pci_status, &ir_handled);
-		if (ir_handled)
+		subdev_handled = false;
+		v4l2_subdev_call(dev->sd_ir, core, interrupt_service_routine,
+				 pci_status, &subdev_handled);
+		if (subdev_handled)
 			handled++;
 	}
 
+	if ((pci_status & pci_mask) & PCI_MSK_AV_CORE) {
+		cx23885_irq_disable(dev, PCI_MSK_AV_CORE);
+		if (!schedule_work(&dev->cx25840_work))
+			printk(KERN_ERR "%s: failed to set up deferred work for"
+			       " AV Core/IR interrupt. Interrupt is disabled"
+			       " and won't be re-enabled\n", dev->name);
+		handled++;
+	}
+
 	if (handled)
 		cx_write(PCI_INT_STAT, pci_status);
 out:
@@ -1788,11 +1883,11 @@ static void cx23885_v4l2_dev_notify(struct v4l2_subdev *sd,
 	dev = to_cx23885(sd->v4l2_dev);
 
 	switch (notification) {
-	case V4L2_SUBDEV_IR_RX_NOTIFY: /* Called in an IRQ context */
+	case V4L2_SUBDEV_IR_RX_NOTIFY: /* Possibly called in an IRQ context */
 		if (sd == dev->sd_ir)
 			cx23885_ir_rx_v4l2_dev_notify(sd, *(u32 *)arg);
 		break;
-	case V4L2_SUBDEV_IR_TX_NOTIFY: /* Called in an IRQ context */
+	case V4L2_SUBDEV_IR_TX_NOTIFY: /* Possibly called in an IRQ context */
 		if (sd == dev->sd_ir)
 			cx23885_ir_tx_v4l2_dev_notify(sd, *(u32 *)arg);
 		break;
@@ -1801,6 +1896,7 @@ static void cx23885_v4l2_dev_notify(struct v4l2_subdev *sd,
 
 static void cx23885_v4l2_dev_notify_init(struct cx23885_dev *dev)
 {
+	INIT_WORK(&dev->cx25840_work, cx23885_av_work_handler);
 	INIT_WORK(&dev->ir_rx_work, cx23885_ir_rx_work_handler);
 	INIT_WORK(&dev->ir_tx_work, cx23885_ir_tx_work_handler);
 	dev->v4l2_dev.notify = cx23885_v4l2_dev_notify;
@@ -1967,7 +2063,7 @@ static int __devinit cx23885_initdev(struct pci_dev *pci_dev,
 
 	switch (dev->board) {
 	case CX23885_BOARD_NETUP_DUAL_DVBS2_CI:
-		cx_set(PCI_INT_MSK, 0x01800000); /* for NetUP */
+		cx23885_irq_add_enable(dev, 0x01800000); /* for NetUP */
 		break;
 	}
 

drivers/media/video/cx23885/cx23885-i2c.c

@@ -99,7 +99,7 @@ static int i2c_sendbytes(struct i2c_adapter *i2c_adap,
 		if (!i2c_wait_done(i2c_adap))
 			return -EIO;
 		if (!i2c_slave_did_ack(i2c_adap))
-			return -EIO;
+			return -ENXIO;
 
 		dprintk(1, "%s() returns 0\n", __func__);
 		return 0;
@@ -120,11 +120,12 @@ static int i2c_sendbytes(struct i2c_adapter *i2c_adap,
 	cx_write(bus->reg_wdata, wdata);
 	cx_write(bus->reg_ctrl, ctrl);
 
-	retval = i2c_wait_done(i2c_adap);
-	if (retval < 0)
-		goto err;
-	if (retval == 0)
+	if (!i2c_wait_done(i2c_adap))
 		goto eio;
+	if (!i2c_slave_did_ack(i2c_adap)) {
+		retval = -ENXIO;
+		goto err;
+	}
 	if (i2c_debug) {
 		printk(" <W %02x %02x", msg->addr << 1, msg->buf[0]);
 		if (!(ctrl & I2C_NOSTOP))
@@ -145,10 +146,7 @@ static int i2c_sendbytes(struct i2c_adapter *i2c_adap,
 		cx_write(bus->reg_wdata, wdata);
 		cx_write(bus->reg_ctrl, ctrl);
 
-		retval = i2c_wait_done(i2c_adap);
-		if (retval < 0)
-			goto err;
-		if (retval == 0)
+		if (!i2c_wait_done(i2c_adap))
 			goto eio;
 		if (i2c_debug) {
 			dprintk(1, " %02x", msg->buf[cnt]);
@@ -185,7 +183,7 @@ static int i2c_readbytes(struct i2c_adapter *i2c_adap,
 		if (!i2c_wait_done(i2c_adap))
 			return -EIO;
 		if (!i2c_slave_did_ack(i2c_adap))
-			return -EIO;
+			return -ENXIO;
 
 
 		dprintk(1, "%s() returns 0\n", __func__);
@@ -209,11 +207,12 @@ static int i2c_readbytes(struct i2c_adapter *i2c_adap,
 		cx_write(bus->reg_addr, msg->addr << 25);
 		cx_write(bus->reg_ctrl, ctrl);
 
-		retval = i2c_wait_done(i2c_adap);
-		if (retval < 0)
-			goto err;
-		if (retval == 0)
+		if (!i2c_wait_done(i2c_adap))
 			goto eio;
+		if (cnt == 0 && !i2c_slave_did_ack(i2c_adap)) {
+			retval = -ENXIO;
+			goto err;
+		}
 		msg->buf[cnt] = cx_read(bus->reg_rdata) & 0xff;
 		if (i2c_debug) {
 			dprintk(1, " %02x", msg->buf[cnt]);

drivers/media/video/cx23885/cx23885-input.c

@@ -44,40 +44,26 @@
 
 #define MODULE_NAME "cx23885"
 
-static void convert_measurement(u32 x, struct ir_raw_event *y)
-{
-	if (x == V4L2_SUBDEV_IR_PULSE_RX_SEQ_END) {
-		y->pulse = false;
-		y->duration = V4L2_SUBDEV_IR_PULSE_MAX_WIDTH_NS;
-		return;
-	}
-
-	y->pulse = (x & V4L2_SUBDEV_IR_PULSE_LEVEL_MASK) ? true : false;
-	y->duration = x & V4L2_SUBDEV_IR_PULSE_MAX_WIDTH_NS;
-}
-
 static void cx23885_input_process_measurements(struct cx23885_dev *dev,
 					       bool overrun)
 {
 	struct cx23885_kernel_ir *kernel_ir = dev->kernel_ir;
-	struct ir_raw_event kernel_ir_event;
 
-	u32 sd_ir_data[64];
 	ssize_t num;
 	int count, i;
 	bool handle = false;
+	struct ir_raw_event ir_core_event[64];
 
 	do {
 		num = 0;
-		v4l2_subdev_call(dev->sd_ir, ir, rx_read, (u8 *) sd_ir_data,
-				 sizeof(sd_ir_data), &num);
+		v4l2_subdev_call(dev->sd_ir, ir, rx_read, (u8 *) ir_core_event,
+				 sizeof(ir_core_event), &num);
 
-		count = num / sizeof(u32);
+		count = num / sizeof(struct ir_raw_event);
 
 		for (i = 0; i < count; i++) {
-			convert_measurement(sd_ir_data[i], &kernel_ir_event);
 			ir_raw_event_store(kernel_ir->inp_dev,
-					   &kernel_ir_event);
+					   &ir_core_event[i]);
 			handle = true;
 		}
 	} while (num != 0);
@@ -99,8 +85,10 @@ void cx23885_input_rx_work_handler(struct cx23885_dev *dev, u32 events)
 	switch (dev->board) {
 	case CX23885_BOARD_HAUPPAUGE_HVR1850:
 	case CX23885_BOARD_HAUPPAUGE_HVR1290:
+	case CX23885_BOARD_TEVII_S470:
+	case CX23885_BOARD_HAUPPAUGE_HVR1250:
 		/*
-		 * The only board we handle right now.  However other boards
+		 * The only boards we handle right now.  However other boards
 		 * using the CX2388x integrated IR controller should be similar
 		 */
 		break;
@@ -148,6 +136,7 @@ static int cx23885_input_ir_start(struct cx23885_dev *dev)
 	switch (dev->board) {
 	case CX23885_BOARD_HAUPPAUGE_HVR1850:
 	case CX23885_BOARD_HAUPPAUGE_HVR1290:
+	case CX23885_BOARD_HAUPPAUGE_HVR1250:
 		/*
 		 * The IR controller on this board only returns pulse widths.
 		 * Any other mode setting will fail to set up the device.
@@ -170,7 +159,38 @@ static int cx23885_input_ir_start(struct cx23885_dev *dev)
 		 * mark is received as low logic level;
 		 * falling edges are detected as rising edges; etc.
 		 */
-		params.invert = true;
+		params.invert_level = true;
+		break;
+	case CX23885_BOARD_TEVII_S470:
+		/*
+		 * The IR controller on this board only returns pulse widths.
+		 * Any other mode setting will fail to set up the device.
+		 */
+		params.mode = V4L2_SUBDEV_IR_MODE_PULSE_WIDTH;
+		params.enable = true;
+		params.interrupt_enable = true;
+		params.shutdown = false;
+
+		/* Setup for a standard NEC protocol */
+		params.carrier_freq = 37917; /* Hz, 455 kHz/12 for NEC */
+		params.carrier_range_lower = 33000; /* Hz */
+		params.carrier_range_upper = 43000; /* Hz */
+		params.duty_cycle = 33; /* percent, 33 percent for NEC */
+
+		/*
+		 * NEC max pulse width: (64/3)/(455 kHz/12) * 16 nec_units
+		 * (64/3)/(455 kHz/12) * 16 nec_units * 1.375 = 12378022 ns
+		 */
+		params.max_pulse_width = 12378022; /* ns */
+
+		/*
+		 * NEC noise filter min width: (64/3)/(455 kHz/12) * 1 nec_unit
+		 * (64/3)/(455 kHz/12) * 1 nec_units * 0.625 = 351648 ns
+		 */
+		params.noise_filter_min_width = 351648; /* ns */
+
+		params.modulation = false;
+		params.invert_level = true;
 		break;
 	}
 	v4l2_subdev_call(dev->sd_ir, ir, rx_s_parameters, &params);
@@ -244,12 +264,20 @@ int cx23885_input_init(struct cx23885_dev *dev)
 	switch (dev->board) {
 	case CX23885_BOARD_HAUPPAUGE_HVR1850:
 	case CX23885_BOARD_HAUPPAUGE_HVR1290:
-		/* Integrated CX23888 IR controller */
+	case CX23885_BOARD_HAUPPAUGE_HVR1250:
+		/* Integrated CX2388[58] IR controller */
 		driver_type = RC_DRIVER_IR_RAW;
 		allowed_protos = IR_TYPE_ALL;
 		/* The grey Hauppauge RC-5 remote */
 		rc_map = RC_MAP_RC5_HAUPPAUGE_NEW;
 		break;
+	case CX23885_BOARD_TEVII_S470:
+		/* Integrated CX23885 IR controller */
+		driver_type = RC_DRIVER_IR_RAW;
+		allowed_protos = IR_TYPE_ALL;
+		/* A guess at the remote */
+		rc_map = RC_MAP_TEVII_NEC;
+		break;
 	default:
 		return -ENODEV;
 	}

drivers/media/video/cx23885/cx23885-ir.c

@@ -72,7 +72,7 @@ void cx23885_ir_tx_work_handler(struct work_struct *work)
 
 }
 
-/* Called in an IRQ context */
+/* Possibly called in an IRQ context */
 void cx23885_ir_rx_v4l2_dev_notify(struct v4l2_subdev *sd, u32 events)
 {
 	struct cx23885_dev *dev = to_cx23885(sd->v4l2_dev);
@@ -86,10 +86,18 @@ void cx23885_ir_rx_v4l2_dev_notify(struct v4l2_subdev *sd, u32 events)
 		set_bit(CX23885_IR_RX_HW_FIFO_OVERRUN, notifications);
 	if (events & V4L2_SUBDEV_IR_RX_SW_FIFO_OVERRUN)
 		set_bit(CX23885_IR_RX_SW_FIFO_OVERRUN, notifications);
-	schedule_work(&dev->ir_rx_work);
+
+	/*
+	 * For the integrated AV core, we are already in a workqueue context.
+	 * For the CX23888 integrated IR, we are in an interrupt context.
+	 */
+	if (sd == dev->sd_cx25840)
+		cx23885_ir_rx_work_handler(&dev->ir_rx_work);
+	else
+		schedule_work(&dev->ir_rx_work);
 }
 
-/* Called in an IRQ context */
+/* Possibly called in an IRQ context */
 void cx23885_ir_tx_v4l2_dev_notify(struct v4l2_subdev *sd, u32 events)
 {
 	struct cx23885_dev *dev = to_cx23885(sd->v4l2_dev);
@@ -97,5 +105,13 @@ void cx23885_ir_tx_v4l2_dev_notify(struct v4l2_subdev *sd, u32 events)
 
 	if (events & V4L2_SUBDEV_IR_TX_FIFO_SERVICE_REQ)
 		set_bit(CX23885_IR_TX_FIFO_SERVICE_REQ, notifications);
-	schedule_work(&dev->ir_tx_work);
+
+	/*
+	 * For the integrated AV core, we are already in a workqueue context.
+	 * For the CX23888 integrated IR, we are in an interrupt context.
+	 */
+	if (sd == dev->sd_cx25840)
+		cx23885_ir_tx_work_handler(&dev->ir_tx_work);
+	else
+		schedule_work(&dev->ir_tx_work);
 }

drivers/media/video/cx23885/cx23885-reg.h

@@ -213,6 +213,7 @@ Channel manager Data Structure entry = 20 DWORD
 #define DEV_CNTRL2	0x00040000
 
 #define PCI_MSK_IR        (1 << 28)
+#define PCI_MSK_AV_CORE   (1 << 27)
 #define PCI_MSK_GPIO1     (1 << 24)
 #define PCI_MSK_GPIO0     (1 << 23)
 #define PCI_MSK_APB_DMA   (1 << 12)

drivers/media/video/cx23885/cx23885-vbi.c

@@ -74,7 +74,7 @@ static int cx23885_start_vbi_dma(struct cx23885_dev    *dev,
 	q->count = 1;
 
 	/* enable irqs */
-	cx_set(PCI_INT_MSK, cx_read(PCI_INT_MSK) | 0x01);
+	cx23885_irq_add_enable(dev, 0x01);
 	cx_set(VID_A_INT_MSK, 0x000022);
 
 	/* start dma */

drivers/media/video/cx23885/cx23885-video.c

@@ -441,7 +441,7 @@ static int cx23885_start_video_dma(struct cx23885_dev *dev,
 	q->count = 1;
 
 	/* enable irq */
-	cx_set(PCI_INT_MSK, cx_read(PCI_INT_MSK) | 0x01);
+	cx23885_irq_add_enable(dev, 0x01);
 	cx_set(VID_A_INT_MSK, 0x000011);
 
 	/* start dma */
@@ -1205,6 +1205,21 @@ static int vidioc_s_input(struct file *file, void *priv, unsigned int i)
 	return 0;
 }
 
+static int vidioc_log_status(struct file *file, void *priv)
+{
+	struct cx23885_fh  *fh  = priv;
+	struct cx23885_dev *dev = fh->dev;
+
+	printk(KERN_INFO
+		"%s/0: ============  START LOG STATUS  ============\n",
+	       dev->name);
+	call_all(dev, core, log_status);
+	printk(KERN_INFO
+		"%s/0: =============  END LOG STATUS  =============\n",
+	       dev->name);
+	return 0;
+}
+
 static int vidioc_queryctrl(struct file *file, void *priv,
 				struct v4l2_queryctrl *qctrl)
 {
@@ -1410,6 +1425,7 @@ static const struct v4l2_ioctl_ops video_ioctl_ops = {
 	.vidioc_enum_input    = vidioc_enum_input,
 	.vidioc_g_input       = vidioc_g_input,
 	.vidioc_s_input       = vidioc_s_input,
+	.vidioc_log_status    = vidioc_log_status,
 	.vidioc_queryctrl     = vidioc_queryctrl,
 	.vidioc_g_ctrl        = vidioc_g_ctrl,
 	.vidioc_s_ctrl        = vidioc_s_ctrl,
@@ -1449,7 +1465,7 @@ static const struct v4l2_file_operations radio_fops = {
 void cx23885_video_unregister(struct cx23885_dev *dev)
 {
 	dprintk(1, "%s()\n", __func__);
-	cx_clear(PCI_INT_MSK, 1);
+	cx23885_irq_remove(dev, 0x01);
 
 	if (dev->video_dev) {
 		if (video_is_registered(dev->video_dev))
@@ -1486,7 +1502,8 @@ int cx23885_video_register(struct cx23885_dev *dev)
 		VID_A_DMA_CTL, 0x11, 0x00);
 
 	/* Don't enable VBI yet */
-	cx_set(PCI_INT_MSK, 1);
+
+	cx23885_irq_add_enable(dev, 0x01);
 
 	if (TUNER_ABSENT != dev->tuner_type) {
 		struct v4l2_subdev *sd = NULL;

drivers/media/video/cx23885/cx23885.h

@@ -325,6 +325,7 @@ struct cx23885_dev {
 	u32                        __iomem *lmmio;
 	u8                         __iomem *bmmio;
 	int                        pci_irqmask;
+	spinlock_t		   pci_irqmask_lock; /* protects mask reg too */
 	int                        hwrevision;
 
 	/* This valud is board specific and is used to configure the
@@ -365,6 +366,7 @@ struct cx23885_dev {
 	unsigned char              radio_addr;
 	unsigned int               has_radio;
 	struct v4l2_subdev 	   *sd_cx25840;
+	struct work_struct	   cx25840_work;
 
 	/* Infrared */
 	struct v4l2_subdev         *sd_ir;
@@ -403,7 +405,8 @@ static inline struct cx23885_dev *to_cx23885(struct v4l2_device *v4l2_dev)
 #define call_all(dev, o, f, args...) \
 	v4l2_device_call_all(&dev->v4l2_dev, 0, o, f, ##args)
 
-#define CX23885_HW_888_IR (1 << 0)
+#define CX23885_HW_888_IR  (1 << 0)
+#define CX23885_HW_AV_CORE (1 << 1)
 
 #define call_hw(dev, grpid, o, f, args...) \
 	v4l2_device_call_all(&dev->v4l2_dev, grpid, o, f, ##args)
@@ -484,6 +487,10 @@ extern u32 cx23885_gpio_get(struct cx23885_dev *dev, u32 mask);
 extern void cx23885_gpio_enable(struct cx23885_dev *dev, u32 mask,
 	int asoutput);
 
+extern void cx23885_irq_add_enable(struct cx23885_dev *dev, u32 mask);
+extern void cx23885_irq_enable(struct cx23885_dev *dev, u32 mask);
+extern void cx23885_irq_disable(struct cx23885_dev *dev, u32 mask);
+extern void cx23885_irq_remove(struct cx23885_dev *dev, u32 mask);
 
 /* ----------------------------------------------------------- */
 /* cx23885-cards.c                                             */

drivers/media/video/cx23885/cx23888-ir.c

@@ -26,6 +26,7 @@
 
 #include <media/v4l2-device.h>
 #include <media/v4l2-chip-ident.h>
+#include <media/ir-core.h>
 
 #include "cx23885.h"
 
@@ -60,6 +61,8 @@ MODULE_PARM_DESC(ir_888_debug, "enable debug messages [CX23888 IR controller]");
 #define CNTRL_CPL	0x00001000
 #define CNTRL_LBM	0x00002000
 #define CNTRL_R		0x00004000
+/* CX23888 specific control flag */
+#define CNTRL_IVO	0x00008000
 
 #define CX23888_IR_TXCLK_REG	0x170004
 #define TXCLK_TCD	0x0000FFFF
@@ -111,8 +114,18 @@ MODULE_PARM_DESC(ir_888_debug, "enable debug messages [CX23888 IR controller]");
 #define CX23888_VIDCLK_FREQ	108000000 /* 108 MHz, BT.656 */
 #define CX23888_IR_REFCLK_FREQ	(CX23888_VIDCLK_FREQ / 2)
 
-#define CX23888_IR_RX_KFIFO_SIZE	(512 * sizeof(u32))
-#define CX23888_IR_TX_KFIFO_SIZE	(512 * sizeof(u32))
+/*
+ * We use this union internally for convenience, but callers to tx_write
+ * and rx_read will be expecting records of type struct ir_raw_event.
+ * Always ensure the size of this union is dictated by struct ir_raw_event.
+ */
+union cx23888_ir_fifo_rec {
+	u32 hw_fifo_data;
+	struct ir_raw_event ir_core_data;
+};
+
+#define CX23888_IR_RX_KFIFO_SIZE    (256 * sizeof(union cx23888_ir_fifo_rec))
+#define CX23888_IR_TX_KFIFO_SIZE    (256 * sizeof(union cx23888_ir_fifo_rec))
 
 struct cx23888_ir_state {
 	struct v4l2_subdev sd;
@@ -423,6 +436,13 @@ static inline void control_tx_polarity_invert(struct cx23885_dev *dev,
 			   invert ? CNTRL_CPL : 0);
 }
 
+static inline void control_tx_level_invert(struct cx23885_dev *dev,
+					  bool invert)
+{
+	cx23888_ir_and_or4(dev, CX23888_IR_CNTRL_REG, ~CNTRL_IVO,
+			   invert ? CNTRL_IVO : 0);
+}
+
 /*
  * IR Rx & Tx Clock Register helpers
  */
@@ -449,8 +469,8 @@ static u32 txclk_tx_s_max_pulse_width(struct cx23885_dev *dev, u32 ns,
 {
 	u64 pulse_clocks;
 
-	if (ns > V4L2_SUBDEV_IR_PULSE_MAX_WIDTH_NS)
-		ns = V4L2_SUBDEV_IR_PULSE_MAX_WIDTH_NS;
+	if (ns > IR_MAX_DURATION)
+		ns = IR_MAX_DURATION;
 	pulse_clocks = ns_to_pulse_clocks(ns);
 	*divider = pulse_clocks_to_clock_divider(pulse_clocks);
 	cx23888_ir_write4(dev, CX23888_IR_TXCLK_REG, *divider);
@@ -462,8 +482,8 @@ static u32 rxclk_rx_s_max_pulse_width(struct cx23885_dev *dev, u32 ns,
 {
 	u64 pulse_clocks;
 
-	if (ns > V4L2_SUBDEV_IR_PULSE_MAX_WIDTH_NS)
-		ns = V4L2_SUBDEV_IR_PULSE_MAX_WIDTH_NS;
+	if (ns > IR_MAX_DURATION)
+		ns = IR_MAX_DURATION;
 	pulse_clocks = ns_to_pulse_clocks(ns);
 	*divider = pulse_clocks_to_clock_divider(pulse_clocks);
 	cx23888_ir_write4(dev, CX23888_IR_RXCLK_REG, *divider);
@@ -526,8 +546,8 @@ static int cx23888_ir_irq_handler(struct v4l2_subdev *sd, u32 status,
 	u32 irqen = cx23888_ir_read4(dev, CX23888_IR_IRQEN_REG);
 	u32 stats = cx23888_ir_read4(dev, CX23888_IR_STATS_REG);
 
-	u32 rx_data[FIFO_RX_DEPTH];
-	int i, j, k;
+	union cx23888_ir_fifo_rec rx_data[FIFO_RX_DEPTH];
+	unsigned int i, j, k;
 	u32 events, v;
 	int tsr, rsr, rto, ror, tse, rse, rte, roe, kror;
 
@@ -588,11 +608,12 @@ static int cx23888_ir_irq_handler(struct v4l2_subdev *sd, u32 status,
 			for (j = 0;
 			     (v & FIFO_RX_NDV) && j < FIFO_RX_DEPTH; j++) {
 				v = cx23888_ir_read4(dev, CX23888_IR_FIFO_REG);
-				rx_data[i++] = v & ~FIFO_RX_NDV;
+				rx_data[i].hw_fifo_data = v & ~FIFO_RX_NDV;
+				i++;
 			}
 			if (i == 0)
 				break;
-			j = i * sizeof(u32);
+			j = i * sizeof(union cx23888_ir_fifo_rec);
 			k = kfifo_in_locked(&state->rx_kfifo,
 				      (unsigned char *) rx_data, j,
 				      &state->rx_kfifo_lock);
@@ -651,10 +672,11 @@ static int cx23888_ir_rx_read(struct v4l2_subdev *sd, u8 *buf, size_t count,
 	u16 divider = (u16) atomic_read(&state->rxclk_divider);
 
 	unsigned int i, n;
-	u32 *p;
-	u32 u, v;
+	union cx23888_ir_fifo_rec *p;
+	unsigned u, v;
 
-	n = count / sizeof(u32) * sizeof(u32);
+	n = count / sizeof(union cx23888_ir_fifo_rec)
+		* sizeof(union cx23888_ir_fifo_rec);
 	if (n == 0) {
 		*num = 0;
 		return 0;
@@ -662,26 +684,28 @@ static int cx23888_ir_rx_read(struct v4l2_subdev *sd, u8 *buf, size_t count,
 
 	n = kfifo_out_locked(&state->rx_kfifo, buf, n, &state->rx_kfifo_lock);
 
-	n /= sizeof(u32);
-	*num = n * sizeof(u32);
+	n /= sizeof(union cx23888_ir_fifo_rec);
+	*num = n * sizeof(union cx23888_ir_fifo_rec);
+
+	for (p = (union cx23888_ir_fifo_rec *) buf, i = 0; i < n; p++, i++) {
 
-	for (p = (u32 *) buf, i = 0; i < n; p++, i++) {
-		if ((*p & FIFO_RXTX_RTO) == FIFO_RXTX_RTO) {
-			*p = V4L2_SUBDEV_IR_PULSE_RX_SEQ_END;
+		if ((p->hw_fifo_data & FIFO_RXTX_RTO) == FIFO_RXTX_RTO) {
+			/* Assume RTO was because of no IR light input */
+			u = 0;
 			v4l2_dbg(2, ir_888_debug, sd, "rx read: end of rx\n");
-			continue;
+		} else {
+			u = (p->hw_fifo_data & FIFO_RXTX_LVL) ? 1 : 0;
+			if (invert)
+				u = u ? 0 : 1;
 		}
 
-		u = (*p & FIFO_RXTX_LVL) ? V4L2_SUBDEV_IR_PULSE_LEVEL_MASK : 0;
-		if (invert)
-			u = u ? 0 : V4L2_SUBDEV_IR_PULSE_LEVEL_MASK;
+		v = (unsigned) pulse_width_count_to_ns(
+				  (u16) (p->hw_fifo_data & FIFO_RXTX), divider);
+		if (v > IR_MAX_DURATION)
+			v = IR_MAX_DURATION;
 
-		v = (u32) pulse_width_count_to_ns((u16) (*p & FIFO_RXTX),
-						  divider);
-		if (v >= V4L2_SUBDEV_IR_PULSE_MAX_WIDTH_NS)
-			v = V4L2_SUBDEV_IR_PULSE_MAX_WIDTH_NS - 1;
-
-		*p = u | v;
+		p->ir_core_data.pulse = u;
+		p->ir_core_data.duration = v;
 
 		v4l2_dbg(2, ir_888_debug, sd, "rx read: %10u ns  %s\n",
 			 v, u ? "mark" : "space");
@@ -740,7 +764,8 @@ static int cx23888_ir_rx_s_parameters(struct v4l2_subdev *sd,
 
 	o->mode = p->mode = V4L2_SUBDEV_IR_MODE_PULSE_WIDTH;
 
-	o->bytes_per_data_element = p->bytes_per_data_element = sizeof(u32);
+	o->bytes_per_data_element = p->bytes_per_data_element
+				  = sizeof(union cx23888_ir_fifo_rec);
 
 	/* Before we tweak the hardware, we have to disable the receiver */
 	irqenable_rx(dev, 0);
@@ -762,12 +787,15 @@ static int cx23888_ir_rx_s_parameters(struct v4l2_subdev *sd,
 					    &p->carrier_range_upper);
 		o->carrier_range_lower = p->carrier_range_lower;
 		o->carrier_range_upper = p->carrier_range_upper;
+
+		p->max_pulse_width =
+			(u32) pulse_width_count_to_ns(FIFO_RXTX, rxclk_divider);
 	} else {
 		p->max_pulse_width =
 			    rxclk_rx_s_max_pulse_width(dev, p->max_pulse_width,
 						       &rxclk_divider);
-		o->max_pulse_width = p->max_pulse_width;
 	}
+	o->max_pulse_width = p->max_pulse_width;
 	atomic_set(&state->rxclk_divider, rxclk_divider);
 
 	p->noise_filter_min_width =
@@ -782,8 +810,8 @@ static int cx23888_ir_rx_s_parameters(struct v4l2_subdev *sd,
 
 	control_rx_s_edge_detection(dev, CNTRL_EDG_BOTH);
 
-	o->invert = p->invert;
-	atomic_set(&state->rx_invert, p->invert);
+	o->invert_level = p->invert_level;
+	atomic_set(&state->rx_invert, p->invert_level);
 
 	o->interrupt_enable = p->interrupt_enable;
 	o->enable = p->enable;
@@ -864,7 +892,8 @@ static int cx23888_ir_tx_s_parameters(struct v4l2_subdev *sd,
 
 	o->mode = p->mode = V4L2_SUBDEV_IR_MODE_PULSE_WIDTH;
 
-	o->bytes_per_data_element = p->bytes_per_data_element = sizeof(u32);
+	o->bytes_per_data_element = p->bytes_per_data_element
+				  = sizeof(union cx23888_ir_fifo_rec);
 
 	/* Before we tweak the hardware, we have to disable the transmitter */
 	irqenable_tx(dev, 0);
@@ -880,12 +909,15 @@ static int cx23888_ir_tx_s_parameters(struct v4l2_subdev *sd,
 
 		p->duty_cycle = cduty_tx_s_duty_cycle(dev, p->duty_cycle);
 		o->duty_cycle = p->duty_cycle;
+
+		p->max_pulse_width =
+			(u32) pulse_width_count_to_ns(FIFO_RXTX, txclk_divider);
 	} else {
 		p->max_pulse_width =
 			    txclk_tx_s_max_pulse_width(dev, p->max_pulse_width,
 						       &txclk_divider);
-		o->max_pulse_width = p->max_pulse_width;
 	}
+	o->max_pulse_width = p->max_pulse_width;
 	atomic_set(&state->txclk_divider, txclk_divider);
 
 	p->resolution = clock_divider_to_resolution(txclk_divider);
@@ -894,8 +926,11 @@ static int cx23888_ir_tx_s_parameters(struct v4l2_subdev *sd,
 	/* FIXME - make this dependent on resolution for better performance */
 	control_tx_irq_watermark(dev, TX_FIFO_HALF_EMPTY);
 
-	control_tx_polarity_invert(dev, p->invert);
-	o->invert = p->invert;
+	control_tx_polarity_invert(dev, p->invert_carrier_sense);
+	o->invert_carrier_sense = p->invert_carrier_sense;
+
+	control_tx_level_invert(dev, p->invert_level);
+	o->invert_level = p->invert_level;
 
 	o->interrupt_enable = p->interrupt_enable;
 	o->enable = p->enable;
@@ -988,12 +1023,10 @@ static int cx23888_ir_log_status(struct v4l2_subdev *sd)
 			  "-%1d/+%1d, %u to %u Hz\n", i, j,
 			  clock_divider_to_freq(rxclk, 16 + j),
 			  clock_divider_to_freq(rxclk, 16 - i));
-	} else {
-		v4l2_info(sd, "\tMax measurable pulse width:        %u us, "
-			  "%llu ns\n",
-			  pulse_width_count_to_us(FIFO_RXTX, rxclk),
-			  pulse_width_count_to_ns(FIFO_RXTX, rxclk));
 	}
+	v4l2_info(sd, "\tMax measurable pulse width:        %u us, %llu ns\n",
+		  pulse_width_count_to_us(FIFO_RXTX, rxclk),
+		  pulse_width_count_to_ns(FIFO_RXTX, rxclk));
 	v4l2_info(sd, "\tLow pass filter:                   %s\n",
 		  filtr ? "enabled" : "disabled");
 	if (filtr)
@@ -1025,19 +1058,20 @@ static int cx23888_ir_log_status(struct v4l2_subdev *sd)
 		  cntrl & CNTRL_TFE ? "enabled" : "disabled");
 	v4l2_info(sd, "\tFIFO interrupt watermark:          %s\n",
 		  cntrl & CNTRL_TIC ? "not empty" : "half full or less");
-	v4l2_info(sd, "\tSignal polarity:                   %s\n",
-		  cntrl & CNTRL_CPL ? "0:mark 1:space" : "0:space 1:mark");
+	v4l2_info(sd, "\tOutput pin level inversion         %s\n",
+		  cntrl & CNTRL_IVO ? "yes" : "no");
+	v4l2_info(sd, "\tCarrier polarity:                  %s\n",
+		  cntrl & CNTRL_CPL ? "space:burst mark:noburst"
+				    : "space:noburst mark:burst");
 	if (cntrl & CNTRL_MOD) {
 		v4l2_info(sd, "\tCarrier (16 clocks):               %u Hz\n",
 			  clock_divider_to_carrier_freq(txclk));
 		v4l2_info(sd, "\tCarrier duty cycle:                %2u/16\n",
 			  cduty + 1);
-	} else {
-		v4l2_info(sd, "\tMax pulse width:                   %u us, "
-			  "%llu ns\n",
-			  pulse_width_count_to_us(FIFO_RXTX, txclk),
-			  pulse_width_count_to_ns(FIFO_RXTX, txclk));
 	}
+	v4l2_info(sd, "\tMax pulse width:                   %u us, %llu ns\n",
+		  pulse_width_count_to_us(FIFO_RXTX, txclk),
+		  pulse_width_count_to_ns(FIFO_RXTX, txclk));
 	v4l2_info(sd, "\tBusy:                              %s\n",
 		  stats & STATS_TBY ? "yes" : "no");
 	v4l2_info(sd, "\tFIFO service requested:            %s\n",
@@ -1111,11 +1145,10 @@ static const struct v4l2_subdev_core_ops cx23888_ir_core_ops = {
 	.g_register = cx23888_ir_g_register,
 	.s_register = cx23888_ir_s_register,
 #endif
+	.interrupt_service_routine = cx23888_ir_irq_handler,
 };
 
 static const struct v4l2_subdev_ir_ops cx23888_ir_ir_ops = {
-	.interrupt_service_routine = cx23888_ir_irq_handler,
-
 	.rx_read = cx23888_ir_rx_read,
 	.rx_g_parameters = cx23888_ir_rx_g_parameters,
 	.rx_s_parameters = cx23888_ir_rx_s_parameters,
@@ -1131,7 +1164,7 @@ static const struct v4l2_subdev_ops cx23888_ir_controller_ops = {
 };
 
 static const struct v4l2_subdev_ir_parameters default_rx_params = {
-	.bytes_per_data_element = sizeof(u32),
+	.bytes_per_data_element = sizeof(union cx23888_ir_fifo_rec),
 	.mode = V4L2_SUBDEV_IR_MODE_PULSE_WIDTH,
 
 	.enable = false,
@@ -1146,11 +1179,11 @@ static const struct v4l2_subdev_ir_parameters default_rx_params = {
 	.noise_filter_min_width = 333333, /* ns */
 	.carrier_range_lower = 35000,
 	.carrier_range_upper = 37000,
-	.invert = false,
+	.invert_level = false,
 };
 
 static const struct v4l2_subdev_ir_parameters default_tx_params = {
-	.bytes_per_data_element = sizeof(u32),
+	.bytes_per_data_element = sizeof(union cx23888_ir_fifo_rec),
 	.mode = V4L2_SUBDEV_IR_MODE_PULSE_WIDTH,
 
 	.enable = false,
@@ -1160,7 +1193,8 @@ static const struct v4l2_subdev_ir_parameters default_tx_params = {
 	.modulation = true,
 	.carrier_freq = 36000, /* 36 kHz - RC-5 carrier */
 	.duty_cycle = 25,      /* 25 %   - RC-5 carrier */
-	.invert = false,
+	.invert_level = false,
+	.invert_carrier_sense = false,
 };
 
 int cx23888_ir_probe(struct cx23885_dev *dev)

drivers/media/video/cx25840/Makefile

@@ -1,5 +1,5 @@
 cx25840-objs    := cx25840-core.o cx25840-audio.o cx25840-firmware.o \
-		   cx25840-vbi.o
+		   cx25840-vbi.o cx25840-ir.o
 
 obj-$(CONFIG_VIDEO_CX25840) += cx25840.o
 

drivers/media/video/cx25840/cx25840-audio.c

@@ -474,33 +474,10 @@ void cx25840_audio_set_path(struct i2c_client *client)
 		cx25840_and_or(client, 0x803, ~0x10, 0x10);
 }
 
-static int get_volume(struct i2c_client *client)
-{
-	struct cx25840_state *state = to_state(i2c_get_clientdata(client));
-	int vol;
-
-	if (state->unmute_volume >= 0)
-		return state->unmute_volume;
-
-	/* Volume runs +18dB to -96dB in 1/2dB steps
-	 * change to fit the msp3400 -114dB to +12dB range */
-
-	/* check PATH1_VOLUME */
-	vol = 228 - cx25840_read(client, 0x8d4);
-	vol = (vol / 2) + 23;
-	return vol << 9;
-}
-
 static void set_volume(struct i2c_client *client, int volume)
 {
-	struct cx25840_state *state = to_state(i2c_get_clientdata(client));
 	int vol;
 
-	if (state->unmute_volume >= 0) {
-		state->unmute_volume = volume;
-		return;
-	}
-
 	/* Convert the volume to msp3400 values (0-127) */
 	vol = volume >> 9;
 
@@ -517,52 +494,6 @@ static void set_volume(struct i2c_client *client, int volume)
 	cx25840_write(client, 0x8d4, 228 - (vol * 2));
 }
 
-static int get_bass(struct i2c_client *client)
-{
-	/* bass is 49 steps +12dB to -12dB */
-
-	/* check PATH1_EQ_BASS_VOL */
-	int bass = cx25840_read(client, 0x8d9) & 0x3f;
-	bass = (((48 - bass) * 0xffff) + 47) / 48;
-	return bass;
-}
-
-static void set_bass(struct i2c_client *client, int bass)
-{
-	/* PATH1_EQ_BASS_VOL */
-	cx25840_and_or(client, 0x8d9, ~0x3f, 48 - (bass * 48 / 0xffff));
-}
-
-static int get_treble(struct i2c_client *client)
-{
-	/* treble is 49 steps +12dB to -12dB */
-
-	/* check PATH1_EQ_TREBLE_VOL */
-	int treble = cx25840_read(client, 0x8db) & 0x3f;
-	treble = (((48 - treble) * 0xffff) + 47) / 48;
-	return treble;
-}
-
-static void set_treble(struct i2c_client *client, int treble)
-{
-	/* PATH1_EQ_TREBLE_VOL */
-	cx25840_and_or(client, 0x8db, ~0x3f, 48 - (treble * 48 / 0xffff));
-}
-
-static int get_balance(struct i2c_client *client)
-{
-	/* balance is 7 bit, 0 to -96dB */
-
-	/* check PATH1_BAL_LEVEL */
-	int balance = cx25840_read(client, 0x8d5) & 0x7f;
-	/* check PATH1_BAL_LEFT */
-	if ((cx25840_read(client, 0x8d5) & 0x80) == 0)
-		balance = 0x80 - balance;
-	else
-		balance = 0x80 + balance;
-	return balance << 8;
-}
-
 static void set_balance(struct i2c_client *client, int balance)
 {
 	int bal = balance >> 8;
@@ -579,31 +510,6 @@ static void set_balance(struct i2c_client *client, int balance)
 	}
 }
 
-static int get_mute(struct i2c_client *client)
-{
-	struct cx25840_state *state = to_state(i2c_get_clientdata(client));
-
-	return state->unmute_volume >= 0;
-}
-
-static void set_mute(struct i2c_client *client, int mute)
-{
-	struct cx25840_state *state = to_state(i2c_get_clientdata(client));
-
-	if (mute && state->unmute_volume == -1) {
-		int vol = get_volume(client);
-
-		set_volume(client, 0);
-		state->unmute_volume = vol;
-	}
-	else if (!mute && state->unmute_volume != -1) {
-		int vol = state->unmute_volume;
-
-		state->unmute_volume = -1;
-		set_volume(client, vol);
-	}
-}
-
 int cx25840_s_clock_freq(struct v4l2_subdev *sd, u32 freq)
 {
 	struct i2c_client *client = v4l2_get_subdevdata(sd);
@@ -624,25 +530,31 @@ int cx25840_s_clock_freq(struct v4l2_subdev *sd, u32 freq)
 	return retval;
 }
 
-int cx25840_audio_g_ctrl(struct v4l2_subdev *sd, struct v4l2_control *ctrl)
+static int cx25840_audio_s_ctrl(struct v4l2_ctrl *ctrl)
 {
+	struct v4l2_subdev *sd = to_sd(ctrl);
+	struct cx25840_state *state = to_state(sd);
 	struct i2c_client *client = v4l2_get_subdevdata(sd);
 
 	switch (ctrl->id) {
 	case V4L2_CID_AUDIO_VOLUME:
-		ctrl->value = get_volume(client);
+		if (state->mute->val)
+			set_volume(client, 0);
+		else
+			set_volume(client, state->volume->val);
 		break;
 	case V4L2_CID_AUDIO_BASS:
-		ctrl->value = get_bass(client);
+		/* PATH1_EQ_BASS_VOL */
+		cx25840_and_or(client, 0x8d9, ~0x3f,
+					48 - (ctrl->val * 48 / 0xffff));
 		break;
 	case V4L2_CID_AUDIO_TREBLE:
-		ctrl->value = get_treble(client);
+		/* PATH1_EQ_TREBLE_VOL */
+		cx25840_and_or(client, 0x8db, ~0x3f,
+					48 - (ctrl->val * 48 / 0xffff));
 		break;
 	case V4L2_CID_AUDIO_BALANCE:
-		ctrl->value = get_balance(client);
-		break;
-	case V4L2_CID_AUDIO_MUTE:
-		ctrl->value = get_mute(client);
+		set_balance(client, ctrl->val);
 		break;
 	default:
 		return -EINVAL;
@@ -650,28 +562,6 @@ int cx25840_audio_g_ctrl(struct v4l2_subdev *sd, struct v4l2_control *ctrl)
 	return 0;
 }
 
-int cx25840_audio_s_ctrl(struct v4l2_subdev *sd, struct v4l2_control *ctrl)
-{
-	struct i2c_client *client = v4l2_get_subdevdata(sd);
-
-	switch (ctrl->id) {
-	case V4L2_CID_AUDIO_VOLUME:
-		set_volume(client, ctrl->value);
-		break;
-	case V4L2_CID_AUDIO_BASS:
-		set_bass(client, ctrl->value);
-		break;
-	case V4L2_CID_AUDIO_TREBLE:
-		set_treble(client, ctrl->value);
-		break;
-	case V4L2_CID_AUDIO_BALANCE:
-		set_balance(client, ctrl->value);
-		break;
-	case V4L2_CID_AUDIO_MUTE:
-		set_mute(client, ctrl->value);
-		break;
-	default:
-		return -EINVAL;
-	}
-	return 0;
-}
+const struct v4l2_ctrl_ops cx25840_audio_ctrl_ops = {
+	.s_ctrl = cx25840_audio_s_ctrl,
+};

drivers/media/video/cx25840/cx25840-core.c

@@ -15,6 +15,9 @@
  *
  * CX23885 support by Steven Toth <stoth@linuxtv.org>.
  *
+ * CX2388[578] IRQ handling, IO Pin mux configuration and other small fixes are
+ * Copyright (C) 2010 Andy Walls <awalls@md.metrocast.net>
+ *
  * This program is free software; you can redistribute it and/or
  * modify it under the terms of the GNU General Public License
  * as published by the Free Software Foundation; either version 2
@@ -48,6 +51,28 @@ MODULE_DESCRIPTION("Conexant CX25840 audio/video decoder driver");
 MODULE_AUTHOR("Ulf Eklund, Chris Kennedy, Hans Verkuil, Tyler Trafford");
 MODULE_LICENSE("GPL");
 
+#define CX25840_VID_INT_STAT_REG 0x410
+#define CX25840_VID_INT_STAT_BITS 0x0000ffff
+#define CX25840_VID_INT_MASK_BITS 0xffff0000
+#define CX25840_VID_INT_MASK_SHFT 16
+#define CX25840_VID_INT_MASK_REG 0x412
+
+#define CX23885_AUD_MC_INT_MASK_REG 0x80c
+#define CX23885_AUD_MC_INT_STAT_BITS 0xffff0000
+#define CX23885_AUD_MC_INT_CTRL_BITS 0x0000ffff
+#define CX23885_AUD_MC_INT_STAT_SHFT 16
+
+#define CX25840_AUD_INT_CTRL_REG 0x812
+#define CX25840_AUD_INT_STAT_REG 0x813
+
+#define CX23885_PIN_CTRL_IRQ_REG 0x123
+#define CX23885_PIN_CTRL_IRQ_IR_STAT  0x40
+#define CX23885_PIN_CTRL_IRQ_AUD_STAT 0x20
+#define CX23885_PIN_CTRL_IRQ_VID_STAT 0x10
+
+#define CX25840_IR_STATS_REG	0x210
+#define CX25840_IR_IRQEN_REG	0x214
+
 static int cx25840_debug;
 
 module_param_named(debug,cx25840_debug, int, 0644);
@@ -80,33 +105,53 @@ int cx25840_write4(struct i2c_client *client, u16 addr, u32 value)
 
 u8 cx25840_read(struct i2c_client * client, u16 addr)
 {
-	u8 buffer[2];
-	buffer[0] = addr >> 8;
-	buffer[1] = addr & 0xff;
-
-	if (i2c_master_send(client, buffer, 2) < 2)
-		return 0;
-
-	if (i2c_master_recv(client, buffer, 1) < 1)
+	struct i2c_msg msgs[2];
+	u8 tx_buf[2], rx_buf[1];
+
+	/* Write register address */
+	tx_buf[0] = addr >> 8;
+	tx_buf[1] = addr & 0xff;
+	msgs[0].addr = client->addr;
+	msgs[0].flags = 0;
+	msgs[0].len = 2;
+	msgs[0].buf = (char *) tx_buf;
+
+	/* Read data from register */
+	msgs[1].addr = client->addr;
+	msgs[1].flags = I2C_M_RD;
+	msgs[1].len = 1;
+	msgs[1].buf = (char *) rx_buf;
+
+	if (i2c_transfer(client->adapter, msgs, 2) < 2)
 		return 0;
 
-	return buffer[0];
+	return rx_buf[0];
 }
 
 u32 cx25840_read4(struct i2c_client * client, u16 addr)
 {
-	u8 buffer[4];
-	buffer[0] = addr >> 8;
-	buffer[1] = addr & 0xff;
-
-	if (i2c_master_send(client, buffer, 2) < 2)
-		return 0;
-
-	if (i2c_master_recv(client, buffer, 4) < 4)
+	struct i2c_msg msgs[2];
+	u8 tx_buf[2], rx_buf[4];
+
+	/* Write register address */
+	tx_buf[0] = addr >> 8;
+	tx_buf[1] = addr & 0xff;
+	msgs[0].addr = client->addr;
+	msgs[0].flags = 0;
+	msgs[0].len = 2;
+	msgs[0].buf = (char *) tx_buf;
+
+	/* Read data from registers */
+	msgs[1].addr = client->addr;
+	msgs[1].flags = I2C_M_RD;
+	msgs[1].len = 4;
+	msgs[1].buf = (char *) rx_buf;
+
+	if (i2c_transfer(client->adapter, msgs, 2) < 2)
 		return 0;
 
-	return (buffer[3] << 24) | (buffer[2] << 16) |
-	    (buffer[1] << 8) | buffer[0];
+	return (rx_buf[3] << 24) | (rx_buf[2] << 16) | (rx_buf[1] << 8) |
+		rx_buf[0];
 }
 
 int cx25840_and_or(struct i2c_client *client, u16 addr, unsigned and_mask,
@@ -117,6 +162,14 @@ int cx25840_and_or(struct i2c_client *client, u16 addr, unsigned and_mask,
 			     or_value);
 }
 
+int cx25840_and_or4(struct i2c_client *client, u16 addr, u32 and_mask,
+		    u32 or_value)
+{
+	return cx25840_write4(client, addr,
+			      (cx25840_read4(client, addr) & and_mask) |
+			      or_value);
+}
+
 /* ----------------------------------------------------------------------- */
 
 static int set_input(struct i2c_client *client, enum cx25840_video_input vid_input,
@@ -124,6 +177,158 @@ static int set_input(struct i2c_client *client, enum cx25840_video_input vid_inp
 
 /* ----------------------------------------------------------------------- */
 
+static int cx23885_s_io_pin_config(struct v4l2_subdev *sd, size_t n,
+				      struct v4l2_subdev_io_pin_config *p)
+{
+	struct i2c_client *client = v4l2_get_subdevdata(sd);
+	int i;
+	u32 pin_ctrl;
+	u8 gpio_oe, gpio_data, strength;
+
+	pin_ctrl = cx25840_read4(client, 0x120);
+	gpio_oe = cx25840_read(client, 0x160);
+	gpio_data = cx25840_read(client, 0x164);
+
+	for (i = 0; i < n; i++) {
+		strength = p[i].strength;
+		if (strength > CX25840_PIN_DRIVE_FAST)
+			strength = CX25840_PIN_DRIVE_FAST;
+
+		switch (p[i].pin) {
+		case CX23885_PIN_IRQ_N_GPIO16:
+			if (p[i].function != CX23885_PAD_IRQ_N) {
+				/* GPIO16 */
+				pin_ctrl &= ~(0x1 << 25);
+			} else {
+				/* IRQ_N */
+				if (p[i].flags &
+					(V4L2_SUBDEV_IO_PIN_DISABLE |
+					 V4L2_SUBDEV_IO_PIN_INPUT)) {
+					pin_ctrl &= ~(0x1 << 25);
+				} else {
+					pin_ctrl |= (0x1 << 25);
+				}
+				if (p[i].flags &
+					V4L2_SUBDEV_IO_PIN_ACTIVE_LOW) {
+					pin_ctrl &= ~(0x1 << 24);
+				} else {
+					pin_ctrl |= (0x1 << 24);
+				}
+			}
+			break;
+		case CX23885_PIN_IR_RX_GPIO19:
+			if (p[i].function != CX23885_PAD_GPIO19) {
+				/* IR_RX */
+				gpio_oe |= (0x1 << 0);
+				pin_ctrl &= ~(0x3 << 18);
+				pin_ctrl |= (strength << 18);
+			} else {
+				/* GPIO19 */
+				gpio_oe &= ~(0x1 << 0);
+				if (p[i].flags & V4L2_SUBDEV_IO_PIN_SET_VALUE) {
+					gpio_data &= ~(0x1 << 0);
+					gpio_data |= ((p[i].value & 0x1) << 0);
+				}
+				pin_ctrl &= ~(0x3 << 12);
+				pin_ctrl |= (strength << 12);
+			}
+			break;
+		case CX23885_PIN_IR_TX_GPIO20:
+			if (p[i].function != CX23885_PAD_GPIO20) {
+				/* IR_TX */
+				gpio_oe |= (0x1 << 1);
+				if (p[i].flags & V4L2_SUBDEV_IO_PIN_DISABLE)
+					pin_ctrl &= ~(0x1 << 10);
+				else
+					pin_ctrl |= (0x1 << 10);
+				pin_ctrl &= ~(0x3 << 18);
+				pin_ctrl |= (strength << 18);
+			} else {
+				/* GPIO20 */
+				gpio_oe &= ~(0x1 << 1);
+				if (p[i].flags & V4L2_SUBDEV_IO_PIN_SET_VALUE) {
+					gpio_data &= ~(0x1 << 1);
+					gpio_data |= ((p[i].value & 0x1) << 1);
+				}
+				pin_ctrl &= ~(0x3 << 12);
+				pin_ctrl |= (strength << 12);
+			}
+			break;
+		case CX23885_PIN_I2S_SDAT_GPIO21:
+			if (p[i].function != CX23885_PAD_GPIO21) {
+				/* I2S_SDAT */
+				/* TODO: Input or Output config */
+				gpio_oe |= (0x1 << 2);
+				pin_ctrl &= ~(0x3 << 22);
+				pin_ctrl |= (strength << 22);
+			} else {
+				/* GPIO21 */
+				gpio_oe &= ~(0x1 << 2);
+				if (p[i].flags & V4L2_SUBDEV_IO_PIN_SET_VALUE) {
+					gpio_data &= ~(0x1 << 2);
+					gpio_data |= ((p[i].value & 0x1) << 2);
+				}
+				pin_ctrl &= ~(0x3 << 12);
+				pin_ctrl |= (strength << 12);
+			}
+			break;
+		case CX23885_PIN_I2S_WCLK_GPIO22:
+			if (p[i].function != CX23885_PAD_GPIO22) {
+				/* I2S_WCLK */
+				/* TODO: Input or Output config */
+				gpio_oe |= (0x1 << 3);
+				pin_ctrl &= ~(0x3 << 22);
+				pin_ctrl |= (strength << 22);
+			} else {
+				/* GPIO22 */
+				gpio_oe &= ~(0x1 << 3);
+				if (p[i].flags & V4L2_SUBDEV_IO_PIN_SET_VALUE) {
+					gpio_data &= ~(0x1 << 3);
+					gpio_data |= ((p[i].value & 0x1) << 3);
+				}
+				pin_ctrl &= ~(0x3 << 12);
+				pin_ctrl |= (strength << 12);
+			}
+			break;
+		case CX23885_PIN_I2S_BCLK_GPIO23:
+			if (p[i].function != CX23885_PAD_GPIO23) {
+				/* I2S_BCLK */
+				/* TODO: Input or Output config */
+				gpio_oe |= (0x1 << 4);
+				pin_ctrl &= ~(0x3 << 22);
+				pin_ctrl |= (strength << 22);
+			} else {
+				/* GPIO23 */
+				gpio_oe &= ~(0x1 << 4);
+				if (p[i].flags & V4L2_SUBDEV_IO_PIN_SET_VALUE) {
+					gpio_data &= ~(0x1 << 4);
+					gpio_data |= ((p[i].value & 0x1) << 4);
+				}
+				pin_ctrl &= ~(0x3 << 12);
+				pin_ctrl |= (strength << 12);
+			}
+			break;
+		}
+	}
+
+	cx25840_write(client, 0x164, gpio_data);
+	cx25840_write(client, 0x160, gpio_oe);
+	cx25840_write4(client, 0x120, pin_ctrl);
+	return 0;
+}
+
+static int common_s_io_pin_config(struct v4l2_subdev *sd, size_t n,
+				      struct v4l2_subdev_io_pin_config *pincfg)
+{
+	struct cx25840_state *state = to_state(sd);
+
+	if (is_cx2388x(state))
+		return cx23885_s_io_pin_config(sd, n, pincfg);
+	return 0;
+}
+
+/* ----------------------------------------------------------------------- */
+
 static void init_dll1(struct i2c_client *client)
 {
 	/* This is the Hauppauge sequence used to
@@ -420,6 +625,13 @@ static void cx23885_initialize(struct i2c_client *client)
 
 	/* start microcontroller */
 	cx25840_and_or(client, 0x803, ~0x10, 0x10);
+
+	/* Disable and clear video interrupts - we don't use them */
+	cx25840_write4(client, CX25840_VID_INT_STAT_REG, 0xffffffff);
+
+	/* Disable and clear audio interrupts - we don't use them */
+	cx25840_write(client, CX25840_AUD_INT_CTRL_REG, 0xff);
+	cx25840_write(client, CX25840_AUD_INT_STAT_REG, 0xff);
 }
 
 /* ----------------------------------------------------------------------- */
@@ -909,102 +1121,29 @@ static int set_v4lstd(struct i2c_client *client)
 
 /* ----------------------------------------------------------------------- */
 
-static int cx25840_s_ctrl(struct v4l2_subdev *sd, struct v4l2_control *ctrl)
+static int cx25840_s_ctrl(struct v4l2_ctrl *ctrl)
 {
-	struct cx25840_state *state = to_state(sd);
+	struct v4l2_subdev *sd = to_sd(ctrl);
 	struct i2c_client *client = v4l2_get_subdevdata(sd);
 
 	switch (ctrl->id) {
-	case CX25840_CID_ENABLE_PVR150_WORKAROUND:
-		state->pvr150_workaround = ctrl->value;
-		set_input(client, state->vid_input, state->aud_input);
-		break;
-
 	case V4L2_CID_BRIGHTNESS:
-		if (ctrl->value < 0 || ctrl->value > 255) {
-			v4l_err(client, "invalid brightness setting %d\n",
-				    ctrl->value);
-			return -ERANGE;
-		}
-
-		cx25840_write(client, 0x414, ctrl->value - 128);
+		cx25840_write(client, 0x414, ctrl->val - 128);
 		break;
 
 	case V4L2_CID_CONTRAST:
-		if (ctrl->value < 0 || ctrl->value > 127) {
-			v4l_err(client, "invalid contrast setting %d\n",
-				    ctrl->value);
-			return -ERANGE;
-		}
-
-		cx25840_write(client, 0x415, ctrl->value << 1);
+		cx25840_write(client, 0x415, ctrl->val << 1);
 		break;
 
 	case V4L2_CID_SATURATION:
-		if (ctrl->value < 0 || ctrl->value > 127) {
-			v4l_err(client, "invalid saturation setting %d\n",
-				    ctrl->value);
-			return -ERANGE;
-		}
-
-		cx25840_write(client, 0x420, ctrl->value << 1);
-		cx25840_write(client, 0x421, ctrl->value << 1);
+		cx25840_write(client, 0x420, ctrl->val << 1);
+		cx25840_write(client, 0x421, ctrl->val << 1);
 		break;
 
 	case V4L2_CID_HUE:
-		if (ctrl->value < -128 || ctrl->value > 127) {
-			v4l_err(client, "invalid hue setting %d\n", ctrl->value);
-			return -ERANGE;
-		}
-
-		cx25840_write(client, 0x422, ctrl->value);
+		cx25840_write(client, 0x422, ctrl->val);
 		break;
 
-	case V4L2_CID_AUDIO_VOLUME:
-	case V4L2_CID_AUDIO_BASS:
-	case V4L2_CID_AUDIO_TREBLE:
-	case V4L2_CID_AUDIO_BALANCE:
-	case V4L2_CID_AUDIO_MUTE:
-		if (is_cx2583x(state))
-			return -EINVAL;
-		return cx25840_audio_s_ctrl(sd, ctrl);
-
-	default:
-		return -EINVAL;
-	}
-
-	return 0;
-}
-
-static int cx25840_g_ctrl(struct v4l2_subdev *sd, struct v4l2_control *ctrl)
-{
-	struct cx25840_state *state = to_state(sd);
-	struct i2c_client *client = v4l2_get_subdevdata(sd);
-
-	switch (ctrl->id) {
-	case CX25840_CID_ENABLE_PVR150_WORKAROUND:
-		ctrl->value = state->pvr150_workaround;
-		break;
-	case V4L2_CID_BRIGHTNESS:
-		ctrl->value = (s8)cx25840_read(client, 0x414) + 128;
-		break;
-	case V4L2_CID_CONTRAST:
-		ctrl->value = cx25840_read(client, 0x415) >> 1;
-		break;
-	case V4L2_CID_SATURATION:
-		ctrl->value = cx25840_read(client, 0x420) >> 1;
-		break;
-	case V4L2_CID_HUE:
-		ctrl->value = (s8)cx25840_read(client, 0x422);
-		break;
-	case V4L2_CID_AUDIO_VOLUME:
-	case V4L2_CID_AUDIO_BASS:
-	case V4L2_CID_AUDIO_TREBLE:
-	case V4L2_CID_AUDIO_BALANCE:
-	case V4L2_CID_AUDIO_MUTE:
-		if (is_cx2583x(state))
-			return -EINVAL;
-		return cx25840_audio_g_ctrl(sd, ctrl);
 	default:
 		return -EINVAL;
 	}
@@ -1163,8 +1302,6 @@ static void log_audio_status(struct i2c_client *client)
 	default: p = "not defined";
 	}
 	v4l_info(client, "Detected audio standard:   %s\n", p);
-	v4l_info(client, "Audio muted:               %s\n",
-		    (state->unmute_volume >= 0) ? "yes" : "no");
 	v4l_info(client, "Audio microcontroller:     %s\n",
 		    (download_ctl & 0x10) ?
 				((mute_ctl & 0x2) ? "detecting" : "running") : "stopped");
@@ -1381,40 +1518,6 @@ static int cx25840_s_stream(struct v4l2_subdev *sd, int enable)
 	return 0;
 }
 
-static int cx25840_queryctrl(struct v4l2_subdev *sd, struct v4l2_queryctrl *qc)
-{
-	struct cx25840_state *state = to_state(sd);
-
-	switch (qc->id) {
-	case V4L2_CID_BRIGHTNESS:
-		return v4l2_ctrl_query_fill(qc, 0, 255, 1, 128);
-	case V4L2_CID_CONTRAST:
-	case V4L2_CID_SATURATION:
-		return v4l2_ctrl_query_fill(qc, 0, 127, 1, 64);
-	case V4L2_CID_HUE:
-		return v4l2_ctrl_query_fill(qc, -128, 127, 1, 0);
-	default:
-		break;
-	}
-	if (is_cx2583x(state))
-		return -EINVAL;
-
-	switch (qc->id) {
-	case V4L2_CID_AUDIO_VOLUME:
-		return v4l2_ctrl_query_fill(qc, 0, 65535,
-				65535 / 100, state->default_volume);
-	case V4L2_CID_AUDIO_MUTE:
-		return v4l2_ctrl_query_fill(qc, 0, 1, 1, 0);
-	case V4L2_CID_AUDIO_BALANCE:
-	case V4L2_CID_AUDIO_BASS:
-	case V4L2_CID_AUDIO_TREBLE:
-		return v4l2_ctrl_query_fill(qc, 0, 65535, 65535 / 100, 32768);
-	default:
-		return -EINVAL;
-	}
-	return -EINVAL;
-}
-
 static int cx25840_s_std(struct v4l2_subdev *sd, v4l2_std_id std)
 {
 	struct cx25840_state *state = to_state(sd);
@@ -1576,24 +1679,134 @@ static int cx25840_log_status(struct v4l2_subdev *sd)
 	log_video_status(client);
 	if (!is_cx2583x(state))
 		log_audio_status(client);
+	cx25840_ir_log_status(sd);
+	v4l2_ctrl_handler_log_status(&state->hdl, sd->name);
+	return 0;
+}
+
+static int cx25840_s_config(struct v4l2_subdev *sd, int irq, void *platform_data)
+{
+	struct cx25840_state *state = to_state(sd);
+	struct i2c_client *client = v4l2_get_subdevdata(sd);
+
+	if (platform_data) {
+		struct cx25840_platform_data *pdata = platform_data;
+
+		state->pvr150_workaround = pdata->pvr150_workaround;
+		set_input(client, state->vid_input, state->aud_input);
+	}
 	return 0;
 }
 
+static int cx23885_irq_handler(struct v4l2_subdev *sd, u32 status,
+			       bool *handled)
+{
+	struct cx25840_state *state = to_state(sd);
+	struct i2c_client *c = v4l2_get_subdevdata(sd);
+	u8 irq_stat, aud_stat, aud_en, ir_stat, ir_en;
+	u32 vid_stat, aud_mc_stat;
+	bool block_handled;
+	int ret = 0;
+
+	irq_stat = cx25840_read(c, CX23885_PIN_CTRL_IRQ_REG);
+	v4l_dbg(2, cx25840_debug, c, "AV Core IRQ status (entry): %s %s %s\n",
+		irq_stat & CX23885_PIN_CTRL_IRQ_IR_STAT ? "ir" : "  ",
+		irq_stat & CX23885_PIN_CTRL_IRQ_AUD_STAT ? "aud" : "   ",
+		irq_stat & CX23885_PIN_CTRL_IRQ_VID_STAT ? "vid" : "   ");
+
+	if ((is_cx23885(state) || is_cx23887(state))) {
+		ir_stat = cx25840_read(c, CX25840_IR_STATS_REG);
+		ir_en = cx25840_read(c, CX25840_IR_IRQEN_REG);
+		v4l_dbg(2, cx25840_debug, c,
+			"AV Core ir IRQ status: %#04x disables: %#04x\n",
+			ir_stat, ir_en);
+		if (irq_stat & CX23885_PIN_CTRL_IRQ_IR_STAT) {
+			block_handled = false;
+			ret = cx25840_ir_irq_handler(sd,
+						     status, &block_handled);
+			if (block_handled)
+				*handled = true;
+		}
+	}
+
+	aud_stat = cx25840_read(c, CX25840_AUD_INT_STAT_REG);
+	aud_en = cx25840_read(c, CX25840_AUD_INT_CTRL_REG);
+	v4l_dbg(2, cx25840_debug, c,
+		"AV Core audio IRQ status: %#04x disables: %#04x\n",
+		aud_stat, aud_en);
+	aud_mc_stat = cx25840_read4(c, CX23885_AUD_MC_INT_MASK_REG);
+	v4l_dbg(2, cx25840_debug, c,
+		"AV Core audio MC IRQ status: %#06x enables: %#06x\n",
+		aud_mc_stat >> CX23885_AUD_MC_INT_STAT_SHFT,
+		aud_mc_stat & CX23885_AUD_MC_INT_CTRL_BITS);
+	if (irq_stat & CX23885_PIN_CTRL_IRQ_AUD_STAT) {
+		if (aud_stat) {
+			cx25840_write(c, CX25840_AUD_INT_STAT_REG, aud_stat);
+			*handled = true;
+		}
+	}
+
+	vid_stat = cx25840_read4(c, CX25840_VID_INT_STAT_REG);
+	v4l_dbg(2, cx25840_debug, c,
+		"AV Core video IRQ status: %#06x disables: %#06x\n",
+		vid_stat & CX25840_VID_INT_STAT_BITS,
+		vid_stat >> CX25840_VID_INT_MASK_SHFT);
+	if (irq_stat & CX23885_PIN_CTRL_IRQ_VID_STAT) {
+		if (vid_stat & CX25840_VID_INT_STAT_BITS) {
+			cx25840_write4(c, CX25840_VID_INT_STAT_REG, vid_stat);
+			*handled = true;
+		}
+	}
+
+	irq_stat = cx25840_read(c, CX23885_PIN_CTRL_IRQ_REG);
+	v4l_dbg(2, cx25840_debug, c, "AV Core IRQ status (exit): %s %s %s\n",
+		irq_stat & CX23885_PIN_CTRL_IRQ_IR_STAT ? "ir" : "  ",
+		irq_stat & CX23885_PIN_CTRL_IRQ_AUD_STAT ? "aud" : "   ",
+		irq_stat & CX23885_PIN_CTRL_IRQ_VID_STAT ? "vid" : "   ");
+
+	return ret;
+}
+
+static int cx25840_irq_handler(struct v4l2_subdev *sd, u32 status,
+			       bool *handled)
+{
+	struct cx25840_state *state = to_state(sd);
+
+	*handled = false;
+
+	/* Only support the CX2388[578] AV Core for now */
+	if (is_cx2388x(state))
+		return cx23885_irq_handler(sd, status, handled);
+
+	return -ENODEV;
+}
+
 /* ----------------------------------------------------------------------- */
 
+static const struct v4l2_ctrl_ops cx25840_ctrl_ops = {
+	.s_ctrl = cx25840_s_ctrl,
+};
+
 static const struct v4l2_subdev_core_ops cx25840_core_ops = {
 	.log_status = cx25840_log_status,
+	.s_config = cx25840_s_config,
 	.g_chip_ident = cx25840_g_chip_ident,
-	.g_ctrl = cx25840_g_ctrl,
-	.s_ctrl = cx25840_s_ctrl,
-	.queryctrl = cx25840_queryctrl,
+	.g_ctrl = v4l2_subdev_g_ctrl,
+	.s_ctrl = v4l2_subdev_s_ctrl,
+	.s_ext_ctrls = v4l2_subdev_s_ext_ctrls,
+	.try_ext_ctrls = v4l2_subdev_try_ext_ctrls,
+	.g_ext_ctrls = v4l2_subdev_g_ext_ctrls,
+	.queryctrl = v4l2_subdev_queryctrl,
+	.querymenu = v4l2_subdev_querymenu,
 	.s_std = cx25840_s_std,
 	.reset = cx25840_reset,
 	.load_fw = cx25840_load_fw,
+	.s_io_pin_config = common_s_io_pin_config,
 #ifdef CONFIG_VIDEO_ADV_DEBUG
 	.g_register = cx25840_g_register,
 	.s_register = cx25840_s_register,
 #endif
+	.interrupt_service_routine = cx25840_irq_handler,
 };
 
 static const struct v4l2_subdev_tuner_ops cx25840_tuner_ops = {
@@ -1628,6 +1841,7 @@ static const struct v4l2_subdev_ops cx25840_ops = {
 	.audio = &cx25840_audio_ops,
 	.video = &cx25840_video_ops,
 	.vbi = &cx25840_vbi_ops,
+	.ir = &cx25840_ir_ops,
 };
 
 /* ----------------------------------------------------------------------- */
@@ -1675,6 +1889,7 @@ static int cx25840_probe(struct i2c_client *client,
 {
 	struct cx25840_state *state;
 	struct v4l2_subdev *sd;
+	int default_volume;
 	u32 id = V4L2_IDENT_NONE;
 	u16 device_id;
 
@@ -1718,6 +1933,7 @@ static int cx25840_probe(struct i2c_client *client,
 
 	sd = &state->sd;
 	v4l2_i2c_subdev_init(sd, client, &cx25840_ops);
+
 	switch (id) {
 	case V4L2_IDENT_CX23885_AV:
 		v4l_info(client, "cx23885 A/V decoder found @ 0x%x (%s)\n",
@@ -1762,22 +1978,62 @@ static int cx25840_probe(struct i2c_client *client,
 	state->audclk_freq = 48000;
 	state->pvr150_workaround = 0;
 	state->audmode = V4L2_TUNER_MODE_LANG1;
-	state->unmute_volume = -1;
-	state->default_volume = 228 - cx25840_read(client, 0x8d4);
-	state->default_volume = ((state->default_volume / 2) + 23) << 9;
 	state->vbi_line_offset = 8;
 	state->id = id;
 	state->rev = device_id;
+	v4l2_ctrl_handler_init(&state->hdl, 9);
+	v4l2_ctrl_new_std(&state->hdl, &cx25840_ctrl_ops,
+			V4L2_CID_BRIGHTNESS, 0, 255, 1, 128);
+	v4l2_ctrl_new_std(&state->hdl, &cx25840_ctrl_ops,
+			V4L2_CID_CONTRAST, 0, 127, 1, 64);
+	v4l2_ctrl_new_std(&state->hdl, &cx25840_ctrl_ops,
+			V4L2_CID_SATURATION, 0, 127, 1, 64);
+	v4l2_ctrl_new_std(&state->hdl, &cx25840_ctrl_ops,
+			V4L2_CID_HUE, -128, 127, 1, 0);
+	if (!is_cx2583x(state)) {
+		default_volume = 228 - cx25840_read(client, 0x8d4);
+		default_volume = ((default_volume / 2) + 23) << 9;
+
+		state->volume = v4l2_ctrl_new_std(&state->hdl,
+			&cx25840_audio_ctrl_ops, V4L2_CID_AUDIO_VOLUME,
+			0, 65335, 65535 / 100, default_volume);
+		state->mute = v4l2_ctrl_new_std(&state->hdl,
+			&cx25840_audio_ctrl_ops, V4L2_CID_AUDIO_MUTE,
+			0, 1, 1, 0);
+		v4l2_ctrl_new_std(&state->hdl, &cx25840_audio_ctrl_ops,
+			V4L2_CID_AUDIO_BALANCE,
+			0, 65535, 65535 / 100, 32768);
+		v4l2_ctrl_new_std(&state->hdl, &cx25840_audio_ctrl_ops,
+			V4L2_CID_AUDIO_BASS,
+			0, 65535, 65535 / 100, 32768);
+		v4l2_ctrl_new_std(&state->hdl, &cx25840_audio_ctrl_ops,
+			V4L2_CID_AUDIO_TREBLE,
+			0, 65535, 65535 / 100, 32768);
+	}
+	sd->ctrl_handler = &state->hdl;
+	if (state->hdl.error) {
+		int err = state->hdl.error;
+
+		v4l2_ctrl_handler_free(&state->hdl);
+		kfree(state);
+		return err;
+	}
+	v4l2_ctrl_cluster(2, &state->volume);
+	v4l2_ctrl_handler_setup(&state->hdl);
 
+	cx25840_ir_probe(sd);
 	return 0;
 }
 
 static int cx25840_remove(struct i2c_client *client)
 {
 	struct v4l2_subdev *sd = i2c_get_clientdata(client);
+	struct cx25840_state *state = to_state(sd);
 
+	cx25840_ir_remove(sd);
 	v4l2_device_unregister_subdev(sd);
-	kfree(to_state(sd));
+	v4l2_ctrl_handler_free(&state->hdl);
+	kfree(state);
 	return 0;
 }
 

drivers/media/video/cx25840/cx25840-core.h

@@ -24,19 +24,20 @@
 #include <linux/videodev2.h>
 #include <media/v4l2-device.h>
 #include <media/v4l2-chip-ident.h>
+#include <media/v4l2-ctrls.h>
 #include <linux/i2c.h>
 
-/* ENABLE_PVR150_WORKAROUND activates a workaround for a hardware bug that is
-   present in Hauppauge PVR-150 (and possibly PVR-500) cards that have
-   certain NTSC tuners (tveeprom tuner model numbers 85, 99 and 112). The
-   audio autodetect fails on some channels for these models and the workaround
-   is to select the audio standard explicitly. Many thanks to Hauppauge for
-   providing this information. */
-#define CX25840_CID_ENABLE_PVR150_WORKAROUND (V4L2_CID_PRIVATE_BASE+0)
+struct cx25840_ir_state;
 
 struct cx25840_state {
 	struct i2c_client *c;
 	struct v4l2_subdev sd;
+	struct v4l2_ctrl_handler hdl;
+	struct {
+		/* volume cluster */
+		struct v4l2_ctrl *volume;
+		struct v4l2_ctrl *mute;
+	};
 	int pvr150_workaround;
 	int radio;
 	v4l2_std_id std;
@@ -44,14 +45,13 @@ struct cx25840_state {
 	enum cx25840_audio_input aud_input;
 	u32 audclk_freq;
 	int audmode;
-	int unmute_volume; /* -1 if not muted */
-	int default_volume;
 	int vbi_line_offset;
 	u32 id;
 	u32 rev;
 	int is_initialized;
 	wait_queue_head_t fw_wait;    /* wake up when the fw load is finished */
 	struct work_struct fw_work;   /* work entry for fw load */
+	struct cx25840_ir_state *ir_state;
 };
 
 static inline struct cx25840_state *to_state(struct v4l2_subdev *sd)
@@ -59,6 +59,11 @@ static inline struct cx25840_state *to_state(struct v4l2_subdev *sd)
 	return container_of(sd, struct cx25840_state, sd);
 }
 
+static inline struct v4l2_subdev *to_sd(struct v4l2_ctrl *ctrl)
+{
+	return &container_of(ctrl->handler, struct cx25840_state, hdl)->sd;
+}
+
 static inline bool is_cx2583x(struct cx25840_state *state)
 {
 	return state->id == V4L2_IDENT_CX25836 ||
@@ -77,6 +82,21 @@ static inline bool is_cx2388x(struct cx25840_state *state)
 	       state->id == V4L2_IDENT_CX23888_AV;
 }
 
+static inline bool is_cx23885(struct cx25840_state *state)
+{
+	return state->id == V4L2_IDENT_CX23885_AV;
+}
+
+static inline bool is_cx23887(struct cx25840_state *state)
+{
+	return state->id == V4L2_IDENT_CX23887_AV;
+}
+
+static inline bool is_cx23888(struct cx25840_state *state)
+{
+	return state->id == V4L2_IDENT_CX23888_AV;
+}
+
 /* ----------------------------------------------------------------------- */
 /* cx25850-core.c 							   */
 int cx25840_write(struct i2c_client *client, u16 addr, u8 value);
@@ -84,6 +104,8 @@ int cx25840_write4(struct i2c_client *client, u16 addr, u32 value);
 u8 cx25840_read(struct i2c_client *client, u16 addr);
 u32 cx25840_read4(struct i2c_client *client, u16 addr);
 int cx25840_and_or(struct i2c_client *client, u16 addr, unsigned mask, u8 value);
+int cx25840_and_or4(struct i2c_client *client, u16 addr, u32 and_mask,
+		    u32 or_value);
 void cx25840_std_setup(struct i2c_client *client);
 
 /* ----------------------------------------------------------------------- */
@@ -94,8 +116,8 @@ int cx25840_loadfw(struct i2c_client *client);
 /* cx25850-audio.c                                                         */
 void cx25840_audio_set_path(struct i2c_client *client);
 int cx25840_s_clock_freq(struct v4l2_subdev *sd, u32 freq);
-int cx25840_audio_g_ctrl(struct v4l2_subdev *sd, struct v4l2_control *ctrl);
-int cx25840_audio_s_ctrl(struct v4l2_subdev *sd, struct v4l2_control *ctrl);
+
+extern const struct v4l2_ctrl_ops cx25840_audio_ctrl_ops;
 
 /* ----------------------------------------------------------------------- */
 /* cx25850-vbi.c                                                           */
@@ -104,4 +126,12 @@ int cx25840_s_sliced_fmt(struct v4l2_subdev *sd, struct v4l2_sliced_vbi_format *
 int cx25840_g_sliced_fmt(struct v4l2_subdev *sd, struct v4l2_sliced_vbi_format *fmt);
 int cx25840_decode_vbi_line(struct v4l2_subdev *sd, struct v4l2_decode_vbi_line *vbi);
 
+/* ----------------------------------------------------------------------- */
+/* cx25850-ir.c                                                            */
+extern const struct v4l2_subdev_ir_ops cx25840_ir_ops;
+int cx25840_ir_log_status(struct v4l2_subdev *sd);
+int cx25840_ir_irq_handler(struct v4l2_subdev *sd, u32 status, bool *handled);
+int cx25840_ir_probe(struct v4l2_subdev *sd);
+int cx25840_ir_remove(struct v4l2_subdev *sd);
+
 #endif

drivers/media/video/cx25840/cx25840-ir.c

@@ -0,0 +1,1279 @@
+/*
+ *  Driver for the Conexant CX2584x Audio/Video decoder chip and related cores
+ *
+ *  Integrated Consumer Infrared Controller
+ *
+ *  Copyright (C) 2010  Andy Walls <awalls@md.metrocast.net>
+ *
+ *  This program is free software; you can redistribute it and/or
+ *  modify it under the terms of the GNU General Public License
+ *  as published by the Free Software Foundation; either version 2
+ *  of the License, or (at your option) any later version.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License
+ *  along with this program; if not, write to the Free Software
+ *  Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+ *  02110-1301, USA.
+ */
+
+#include <linux/slab.h>
+#include <linux/kfifo.h>
+#include <media/cx25840.h>
+#include <media/ir-core.h>
+
+#include "cx25840-core.h"
+
+static unsigned int ir_debug;
+module_param(ir_debug, int, 0644);
+MODULE_PARM_DESC(ir_debug, "enable integrated IR debug messages");
+
+#define CX25840_IR_REG_BASE 	0x200
+
+#define CX25840_IR_CNTRL_REG	0x200
+#define CNTRL_WIN_3_3	0x00000000
+#define CNTRL_WIN_4_3	0x00000001
+#define CNTRL_WIN_3_4	0x00000002
+#define CNTRL_WIN_4_4	0x00000003
+#define CNTRL_WIN	0x00000003
+#define CNTRL_EDG_NONE	0x00000000
+#define CNTRL_EDG_FALL	0x00000004
+#define CNTRL_EDG_RISE	0x00000008
+#define CNTRL_EDG_BOTH	0x0000000C
+#define CNTRL_EDG	0x0000000C
+#define CNTRL_DMD	0x00000010
+#define CNTRL_MOD	0x00000020
+#define CNTRL_RFE	0x00000040
+#define CNTRL_TFE	0x00000080
+#define CNTRL_RXE	0x00000100
+#define CNTRL_TXE	0x00000200
+#define CNTRL_RIC	0x00000400
+#define CNTRL_TIC	0x00000800
+#define CNTRL_CPL	0x00001000
+#define CNTRL_LBM	0x00002000
+#define CNTRL_R		0x00004000
+
+#define CX25840_IR_TXCLK_REG	0x204
+#define TXCLK_TCD	0x0000FFFF
+
+#define CX25840_IR_RXCLK_REG	0x208
+#define RXCLK_RCD	0x0000FFFF
+
+#define CX25840_IR_CDUTY_REG	0x20C
+#define CDUTY_CDC	0x0000000F
+
+#define CX25840_IR_STATS_REG	0x210
+#define STATS_RTO	0x00000001
+#define STATS_ROR	0x00000002
+#define STATS_RBY	0x00000004
+#define STATS_TBY	0x00000008
+#define STATS_RSR	0x00000010
+#define STATS_TSR	0x00000020
+
+#define CX25840_IR_IRQEN_REG	0x214
+#define IRQEN_RTE	0x00000001
+#define IRQEN_ROE	0x00000002
+#define IRQEN_RSE	0x00000010
+#define IRQEN_TSE	0x00000020
+#define IRQEN_MSK	0x00000033
+
+#define CX25840_IR_FILTR_REG	0x218
+#define FILTR_LPF	0x0000FFFF
+
+#define CX25840_IR_FIFO_REG	0x23C
+#define FIFO_RXTX	0x0000FFFF
+#define FIFO_RXTX_LVL	0x00010000
+#define FIFO_RXTX_RTO	0x0001FFFF
+#define FIFO_RX_NDV	0x00020000
+#define FIFO_RX_DEPTH	8
+#define FIFO_TX_DEPTH	8
+
+#define CX25840_VIDCLK_FREQ	108000000 /* 108 MHz, BT.656 */
+#define CX25840_IR_REFCLK_FREQ	(CX25840_VIDCLK_FREQ / 2)
+
+/*
+ * We use this union internally for convenience, but callers to tx_write
+ * and rx_read will be expecting records of type struct ir_raw_event.
+ * Always ensure the size of this union is dictated by struct ir_raw_event.
+ */
+union cx25840_ir_fifo_rec {
+	u32 hw_fifo_data;
+	struct ir_raw_event ir_core_data;
+};
+
+#define CX25840_IR_RX_KFIFO_SIZE    (256 * sizeof(union cx25840_ir_fifo_rec))
+#define CX25840_IR_TX_KFIFO_SIZE    (256 * sizeof(union cx25840_ir_fifo_rec))
+
+struct cx25840_ir_state {
+	struct i2c_client *c;
+
+	struct v4l2_subdev_ir_parameters rx_params;
+	struct mutex rx_params_lock; /* protects Rx parameter settings cache */
+	atomic_t rxclk_divider;
+	atomic_t rx_invert;
+
+	struct kfifo rx_kfifo;
+	spinlock_t rx_kfifo_lock; /* protect Rx data kfifo */
+
+	struct v4l2_subdev_ir_parameters tx_params;
+	struct mutex tx_params_lock; /* protects Tx parameter settings cache */
+	atomic_t txclk_divider;
+};
+
+static inline struct cx25840_ir_state *to_ir_state(struct v4l2_subdev *sd)
+{
+	struct cx25840_state *state = to_state(sd);
+	return state ? state->ir_state : NULL;
+}
+
+
+/*
+ * Rx and Tx Clock Divider register computations
+ *
+ * Note the largest clock divider value of 0xffff corresponds to:
+ * 	(0xffff + 1) * 1000 / 108/2 MHz = 1,213,629.629... ns
+ * which fits in 21 bits, so we'll use unsigned int for time arguments.
+ */
+static inline u16 count_to_clock_divider(unsigned int d)
+{
+	if (d > RXCLK_RCD + 1)
+		d = RXCLK_RCD;
+	else if (d < 2)
+		d = 1;
+	else
+		d--;
+	return (u16) d;
+}
+
+static inline u16 ns_to_clock_divider(unsigned int ns)
+{
+	return count_to_clock_divider(
+		DIV_ROUND_CLOSEST(CX25840_IR_REFCLK_FREQ / 1000000 * ns, 1000));
+}
+
+static inline unsigned int clock_divider_to_ns(unsigned int divider)
+{
+	/* Period of the Rx or Tx clock in ns */
+	return DIV_ROUND_CLOSEST((divider + 1) * 1000,
+				 CX25840_IR_REFCLK_FREQ / 1000000);
+}
+
+static inline u16 carrier_freq_to_clock_divider(unsigned int freq)
+{
+	return count_to_clock_divider(
+			  DIV_ROUND_CLOSEST(CX25840_IR_REFCLK_FREQ, freq * 16));
+}
+
+static inline unsigned int clock_divider_to_carrier_freq(unsigned int divider)
+{
+	return DIV_ROUND_CLOSEST(CX25840_IR_REFCLK_FREQ, (divider + 1) * 16);
+}
+
+static inline u16 freq_to_clock_divider(unsigned int freq,
+					unsigned int rollovers)
+{
+	return count_to_clock_divider(
+		   DIV_ROUND_CLOSEST(CX25840_IR_REFCLK_FREQ, freq * rollovers));
+}
+
+static inline unsigned int clock_divider_to_freq(unsigned int divider,
+						 unsigned int rollovers)
+{
+	return DIV_ROUND_CLOSEST(CX25840_IR_REFCLK_FREQ,
+				 (divider + 1) * rollovers);
+}
+
+/*
+ * Low Pass Filter register calculations
+ *
+ * Note the largest count value of 0xffff corresponds to:
+ * 	0xffff * 1000 / 108/2 MHz = 1,213,611.11... ns
+ * which fits in 21 bits, so we'll use unsigned int for time arguments.
+ */
+static inline u16 count_to_lpf_count(unsigned int d)
+{
+	if (d > FILTR_LPF)
+		d = FILTR_LPF;
+	else if (d < 4)
+		d = 0;
+	return (u16) d;
+}
+
+static inline u16 ns_to_lpf_count(unsigned int ns)
+{
+	return count_to_lpf_count(
+		DIV_ROUND_CLOSEST(CX25840_IR_REFCLK_FREQ / 1000000 * ns, 1000));
+}
+
+static inline unsigned int lpf_count_to_ns(unsigned int count)
+{
+	/* Duration of the Low Pass Filter rejection window in ns */
+	return DIV_ROUND_CLOSEST(count * 1000,
+				 CX25840_IR_REFCLK_FREQ / 1000000);
+}
+
+static inline unsigned int lpf_count_to_us(unsigned int count)
+{
+	/* Duration of the Low Pass Filter rejection window in us */
+	return DIV_ROUND_CLOSEST(count, CX25840_IR_REFCLK_FREQ / 1000000);
+}
+
+/*
+ * FIFO register pulse width count compuations
+ */
+static u32 clock_divider_to_resolution(u16 divider)
+{
+	/*
+	 * Resolution is the duration of 1 tick of the readable portion of
+	 * of the pulse width counter as read from the FIFO.  The two lsb's are
+	 * not readable, hence the << 2.  This function returns ns.
+	 */
+	return DIV_ROUND_CLOSEST((1 << 2)  * ((u32) divider + 1) * 1000,
+				 CX25840_IR_REFCLK_FREQ / 1000000);
+}
+
+static u64 pulse_width_count_to_ns(u16 count, u16 divider)
+{
+	u64 n;
+	u32 rem;
+
+	/*
+	 * The 2 lsb's of the pulse width timer count are not readable, hence
+	 * the (count << 2) | 0x3
+	 */
+	n = (((u64) count << 2) | 0x3) * (divider + 1) * 1000; /* millicycles */
+	rem = do_div(n, CX25840_IR_REFCLK_FREQ / 1000000);     /* / MHz => ns */
+	if (rem >= CX25840_IR_REFCLK_FREQ / 1000000 / 2)
+		n++;
+	return n;
+}
+
+#if 0
+/* Keep as we will need this for Transmit functionality */
+static u16 ns_to_pulse_width_count(u32 ns, u16 divider)
+{
+	u64 n;
+	u32 d;
+	u32 rem;
+
+	/*
+	 * The 2 lsb's of the pulse width timer count are not accessable, hence
+	 * the (1 << 2)
+	 */
+	n = ((u64) ns) * CX25840_IR_REFCLK_FREQ / 1000000; /* millicycles */
+	d = (1 << 2) * ((u32) divider + 1) * 1000; /* millicycles/count */
+	rem = do_div(n, d);
+	if (rem >= d / 2)
+		n++;
+
+	if (n > FIFO_RXTX)
+		n = FIFO_RXTX;
+	else if (n == 0)
+		n = 1;
+	return (u16) n;
+}
+
+#endif
+static unsigned int pulse_width_count_to_us(u16 count, u16 divider)
+{
+	u64 n;
+	u32 rem;
+
+	/*
+	 * The 2 lsb's of the pulse width timer count are not readable, hence
+	 * the (count << 2) | 0x3
+	 */
+	n = (((u64) count << 2) | 0x3) * (divider + 1);    /* cycles      */
+	rem = do_div(n, CX25840_IR_REFCLK_FREQ / 1000000); /* / MHz => us */
+	if (rem >= CX25840_IR_REFCLK_FREQ / 1000000 / 2)
+		n++;
+	return (unsigned int) n;
+}
+
+/*
+ * Pulse Clocks computations: Combined Pulse Width Count & Rx Clock Counts
+ *
+ * The total pulse clock count is an 18 bit pulse width timer count as the most
+ * significant part and (up to) 16 bit clock divider count as a modulus.
+ * When the Rx clock divider ticks down to 0, it increments the 18 bit pulse
+ * width timer count's least significant bit.
+ */
+static u64 ns_to_pulse_clocks(u32 ns)
+{
+	u64 clocks;
+	u32 rem;
+	clocks = CX25840_IR_REFCLK_FREQ / 1000000 * (u64) ns; /* millicycles  */
+	rem = do_div(clocks, 1000);                         /* /1000 = cycles */
+	if (rem >= 1000 / 2)
+		clocks++;
+	return clocks;
+}
+
+static u16 pulse_clocks_to_clock_divider(u64 count)
+{
+	u32 rem;
+
+	rem = do_div(count, (FIFO_RXTX << 2) | 0x3);
+
+	/* net result needs to be rounded down and decremented by 1 */
+	if (count > RXCLK_RCD + 1)
+		count = RXCLK_RCD;
+	else if (count < 2)
+		count = 1;
+	else
+		count--;
+	return (u16) count;
+}
+
+/*
+ * IR Control Register helpers
+ */
+enum tx_fifo_watermark {
+	TX_FIFO_HALF_EMPTY = 0,
+	TX_FIFO_EMPTY      = CNTRL_TIC,
+};
+
+enum rx_fifo_watermark {
+	RX_FIFO_HALF_FULL = 0,
+	RX_FIFO_NOT_EMPTY = CNTRL_RIC,
+};
+
+static inline void control_tx_irq_watermark(struct i2c_client *c,
+					    enum tx_fifo_watermark level)
+{
+	cx25840_and_or4(c, CX25840_IR_CNTRL_REG, ~CNTRL_TIC, level);
+}
+
+static inline void control_rx_irq_watermark(struct i2c_client *c,
+					    enum rx_fifo_watermark level)
+{
+	cx25840_and_or4(c, CX25840_IR_CNTRL_REG, ~CNTRL_RIC, level);
+}
+
+static inline void control_tx_enable(struct i2c_client *c, bool enable)
+{
+	cx25840_and_or4(c, CX25840_IR_CNTRL_REG, ~(CNTRL_TXE | CNTRL_TFE),
+			enable ? (CNTRL_TXE | CNTRL_TFE) : 0);
+}
+
+static inline void control_rx_enable(struct i2c_client *c, bool enable)
+{
+	cx25840_and_or4(c, CX25840_IR_CNTRL_REG, ~(CNTRL_RXE | CNTRL_RFE),
+			enable ? (CNTRL_RXE | CNTRL_RFE) : 0);
+}
+
+static inline void control_tx_modulation_enable(struct i2c_client *c,
+						bool enable)
+{
+	cx25840_and_or4(c, CX25840_IR_CNTRL_REG, ~CNTRL_MOD,
+			enable ? CNTRL_MOD : 0);
+}
+
+static inline void control_rx_demodulation_enable(struct i2c_client *c,
+						  bool enable)
+{
+	cx25840_and_or4(c, CX25840_IR_CNTRL_REG, ~CNTRL_DMD,
+			enable ? CNTRL_DMD : 0);
+}
+
+static inline void control_rx_s_edge_detection(struct i2c_client *c,
+					       u32 edge_types)
+{
+	cx25840_and_or4(c, CX25840_IR_CNTRL_REG, ~CNTRL_EDG_BOTH,
+			edge_types & CNTRL_EDG_BOTH);
+}
+
+static void control_rx_s_carrier_window(struct i2c_client *c,
+					unsigned int carrier,
+					unsigned int *carrier_range_low,
+					unsigned int *carrier_range_high)
+{
+	u32 v;
+	unsigned int c16 = carrier * 16;
+
+	if (*carrier_range_low < DIV_ROUND_CLOSEST(c16, 16 + 3)) {
+		v = CNTRL_WIN_3_4;
+		*carrier_range_low = DIV_ROUND_CLOSEST(c16, 16 + 4);
+	} else {
+		v = CNTRL_WIN_3_3;
+		*carrier_range_low = DIV_ROUND_CLOSEST(c16, 16 + 3);
+	}
+
+	if (*carrier_range_high > DIV_ROUND_CLOSEST(c16, 16 - 3)) {
+		v |= CNTRL_WIN_4_3;
+		*carrier_range_high = DIV_ROUND_CLOSEST(c16, 16 - 4);
+	} else {
+		v |= CNTRL_WIN_3_3;
+		*carrier_range_high = DIV_ROUND_CLOSEST(c16, 16 - 3);
+	}
+	cx25840_and_or4(c, CX25840_IR_CNTRL_REG, ~CNTRL_WIN, v);
+}
+
+static inline void control_tx_polarity_invert(struct i2c_client *c,
+					      bool invert)
+{
+	cx25840_and_or4(c, CX25840_IR_CNTRL_REG, ~CNTRL_CPL,
+			invert ? CNTRL_CPL : 0);
+}
+
+/*
+ * IR Rx & Tx Clock Register helpers
+ */
+static unsigned int txclk_tx_s_carrier(struct i2c_client *c,
+				       unsigned int freq,
+				       u16 *divider)
+{
+	*divider = carrier_freq_to_clock_divider(freq);
+	cx25840_write4(c, CX25840_IR_TXCLK_REG, *divider);
+	return clock_divider_to_carrier_freq(*divider);
+}
+
+static unsigned int rxclk_rx_s_carrier(struct i2c_client *c,
+				       unsigned int freq,
+				       u16 *divider)
+{
+	*divider = carrier_freq_to_clock_divider(freq);
+	cx25840_write4(c, CX25840_IR_RXCLK_REG, *divider);
+	return clock_divider_to_carrier_freq(*divider);
+}
+
+static u32 txclk_tx_s_max_pulse_width(struct i2c_client *c, u32 ns,
+				      u16 *divider)
+{
+	u64 pulse_clocks;
+
+	if (ns > IR_MAX_DURATION)
+		ns = IR_MAX_DURATION;
+	pulse_clocks = ns_to_pulse_clocks(ns);
+	*divider = pulse_clocks_to_clock_divider(pulse_clocks);
+	cx25840_write4(c, CX25840_IR_TXCLK_REG, *divider);
+	return (u32) pulse_width_count_to_ns(FIFO_RXTX, *divider);
+}
+
+static u32 rxclk_rx_s_max_pulse_width(struct i2c_client *c, u32 ns,
+				      u16 *divider)
+{
+	u64 pulse_clocks;
+
+	if (ns > IR_MAX_DURATION)
+		ns = IR_MAX_DURATION;
+	pulse_clocks = ns_to_pulse_clocks(ns);
+	*divider = pulse_clocks_to_clock_divider(pulse_clocks);
+	cx25840_write4(c, CX25840_IR_RXCLK_REG, *divider);
+	return (u32) pulse_width_count_to_ns(FIFO_RXTX, *divider);
+}
+
+/*
+ * IR Tx Carrier Duty Cycle register helpers
+ */
+static unsigned int cduty_tx_s_duty_cycle(struct i2c_client *c,
+					  unsigned int duty_cycle)
+{
+	u32 n;
+	n = DIV_ROUND_CLOSEST(duty_cycle * 100, 625); /* 16ths of 100% */
+	if (n != 0)
+		n--;
+	if (n > 15)
+		n = 15;
+	cx25840_write4(c, CX25840_IR_CDUTY_REG, n);
+	return DIV_ROUND_CLOSEST((n + 1) * 100, 16);
+}
+
+/*
+ * IR Filter Register helpers
+ */
+static u32 filter_rx_s_min_width(struct i2c_client *c, u32 min_width_ns)
+{
+	u32 count = ns_to_lpf_count(min_width_ns);
+	cx25840_write4(c, CX25840_IR_FILTR_REG, count);
+	return lpf_count_to_ns(count);
+}
+
+/*
+ * IR IRQ Enable Register helpers
+ */
+static inline void irqenable_rx(struct v4l2_subdev *sd, u32 mask)
+{
+	struct cx25840_state *state = to_state(sd);
+
+	if (is_cx23885(state) || is_cx23887(state))
+		mask ^= IRQEN_MSK;
+	mask &= (IRQEN_RTE | IRQEN_ROE | IRQEN_RSE);
+	cx25840_and_or4(state->c, CX25840_IR_IRQEN_REG,
+			~(IRQEN_RTE | IRQEN_ROE | IRQEN_RSE), mask);
+}
+
+static inline void irqenable_tx(struct v4l2_subdev *sd, u32 mask)
+{
+	struct cx25840_state *state = to_state(sd);
+
+	if (is_cx23885(state) || is_cx23887(state))
+		mask ^= IRQEN_MSK;
+	mask &= IRQEN_TSE;
+	cx25840_and_or4(state->c, CX25840_IR_IRQEN_REG, ~IRQEN_TSE, mask);
+}
+
+/*
+ * V4L2 Subdevice IR Ops
+ */
+int cx25840_ir_irq_handler(struct v4l2_subdev *sd, u32 status, bool *handled)
+{
+	struct cx25840_state *state = to_state(sd);
+	struct cx25840_ir_state *ir_state = to_ir_state(sd);
+	struct i2c_client *c = NULL;
+	unsigned long flags;
+
+	union cx25840_ir_fifo_rec rx_data[FIFO_RX_DEPTH];
+	unsigned int i, j, k;
+	u32 events, v;
+	int tsr, rsr, rto, ror, tse, rse, rte, roe, kror;
+	u32 cntrl, irqen, stats;
+
+	*handled = false;
+	if (ir_state == NULL)
+		return -ENODEV;
+
+	c = ir_state->c;
+
+	/* Only support the IR controller for the CX2388[57] AV Core for now */
+	if (!(is_cx23885(state) || is_cx23887(state)))
+		return -ENODEV;
+
+	cntrl = cx25840_read4(c, CX25840_IR_CNTRL_REG);
+	irqen = cx25840_read4(c, CX25840_IR_IRQEN_REG);
+	if (is_cx23885(state) || is_cx23887(state))
+		irqen ^= IRQEN_MSK;
+	stats = cx25840_read4(c, CX25840_IR_STATS_REG);
+
+	tsr = stats & STATS_TSR; /* Tx FIFO Service Request */
+	rsr = stats & STATS_RSR; /* Rx FIFO Service Request */
+	rto = stats & STATS_RTO; /* Rx Pulse Width Timer Time Out */
+	ror = stats & STATS_ROR; /* Rx FIFO Over Run */
+
+	tse = irqen & IRQEN_TSE; /* Tx FIFO Service Request IRQ Enable */
+	rse = irqen & IRQEN_RSE; /* Rx FIFO Service Reuqest IRQ Enable */
+	rte = irqen & IRQEN_RTE; /* Rx Pulse Width Timer Time Out IRQ Enable */
+	roe = irqen & IRQEN_ROE; /* Rx FIFO Over Run IRQ Enable */
+
+	v4l2_dbg(2, ir_debug, sd, "IR IRQ Status:  %s %s %s %s %s %s\n",
+		 tsr ? "tsr" : "   ", rsr ? "rsr" : "   ",
+		 rto ? "rto" : "   ", ror ? "ror" : "   ",
+		 stats & STATS_TBY ? "tby" : "   ",
+		 stats & STATS_RBY ? "rby" : "   ");
+
+	v4l2_dbg(2, ir_debug, sd, "IR IRQ Enables: %s %s %s %s\n",
+		 tse ? "tse" : "   ", rse ? "rse" : "   ",
+		 rte ? "rte" : "   ", roe ? "roe" : "   ");
+
+	/*
+	 * Transmitter interrupt service
+	 */
+	if (tse && tsr) {
+		/*
+		 * TODO:
+		 * Check the watermark threshold setting
+		 * Pull FIFO_TX_DEPTH or FIFO_TX_DEPTH/2 entries from tx_kfifo
+		 * Push the data to the hardware FIFO.
+		 * If there was nothing more to send in the tx_kfifo, disable
+		 *	the TSR IRQ and notify the v4l2_device.
+		 * If there was something in the tx_kfifo, check the tx_kfifo
+		 *      level and notify the v4l2_device, if it is low.
+		 */
+		/* For now, inhibit TSR interrupt until Tx is implemented */
+		irqenable_tx(sd, 0);
+		events = V4L2_SUBDEV_IR_TX_FIFO_SERVICE_REQ;
+		v4l2_subdev_notify(sd, V4L2_SUBDEV_IR_TX_NOTIFY, &events);
+		*handled = true;
+	}
+
+	/*
+	 * Receiver interrupt service
+	 */
+	kror = 0;
+	if ((rse && rsr) || (rte && rto)) {
+		/*
+		 * Receive data on RSR to clear the STATS_RSR.
+		 * Receive data on RTO, since we may not have yet hit the RSR
+		 * watermark when we receive the RTO.
+		 */
+		for (i = 0, v = FIFO_RX_NDV;
+		     (v & FIFO_RX_NDV) && !kror; i = 0) {
+			for (j = 0;
+			     (v & FIFO_RX_NDV) && j < FIFO_RX_DEPTH; j++) {
+				v = cx25840_read4(c, CX25840_IR_FIFO_REG);
+				rx_data[i].hw_fifo_data = v & ~FIFO_RX_NDV;
+				i++;
+			}
+			if (i == 0)
+				break;
+			j = i * sizeof(union cx25840_ir_fifo_rec);
+			k = kfifo_in_locked(&ir_state->rx_kfifo,
+					    (unsigned char *) rx_data, j,
+					    &ir_state->rx_kfifo_lock);
+			if (k != j)
+				kror++; /* rx_kfifo over run */
+		}
+		*handled = true;
+	}
+
+	events = 0;
+	v = 0;
+	if (kror) {
+		events |= V4L2_SUBDEV_IR_RX_SW_FIFO_OVERRUN;
+		v4l2_err(sd, "IR receiver software FIFO overrun\n");
+	}
+	if (roe && ror) {
+		/*
+		 * The RX FIFO Enable (CNTRL_RFE) must be toggled to clear
+		 * the Rx FIFO Over Run status (STATS_ROR)
+		 */
+		v |= CNTRL_RFE;
+		events |= V4L2_SUBDEV_IR_RX_HW_FIFO_OVERRUN;
+		v4l2_err(sd, "IR receiver hardware FIFO overrun\n");
+	}
+	if (rte && rto) {
+		/*
+		 * The IR Receiver Enable (CNTRL_RXE) must be toggled to clear
+		 * the Rx Pulse Width Timer Time Out (STATS_RTO)
+		 */
+		v |= CNTRL_RXE;
+		events |= V4L2_SUBDEV_IR_RX_END_OF_RX_DETECTED;
+	}
+	if (v) {
+		/* Clear STATS_ROR & STATS_RTO as needed by reseting hardware */
+		cx25840_write4(c, CX25840_IR_CNTRL_REG, cntrl & ~v);
+		cx25840_write4(c, CX25840_IR_CNTRL_REG, cntrl);
+		*handled = true;
+	}
+	spin_lock_irqsave(&ir_state->rx_kfifo_lock, flags);
+	if (kfifo_len(&ir_state->rx_kfifo) >= CX25840_IR_RX_KFIFO_SIZE / 2)
+		events |= V4L2_SUBDEV_IR_RX_FIFO_SERVICE_REQ;
+	spin_unlock_irqrestore(&ir_state->rx_kfifo_lock, flags);
+
+	if (events)
+		v4l2_subdev_notify(sd, V4L2_SUBDEV_IR_RX_NOTIFY, &events);
+	return 0;
+}
+
+/* Receiver */
+static int cx25840_ir_rx_read(struct v4l2_subdev *sd, u8 *buf, size_t count,
+			      ssize_t *num)
+{
+	struct cx25840_ir_state *ir_state = to_ir_state(sd);
+	bool invert;
+	u16 divider;
+	unsigned int i, n;
+	union cx25840_ir_fifo_rec *p;
+	unsigned u, v;
+
+	if (ir_state == NULL)
+		return -ENODEV;
+
+	invert = (bool) atomic_read(&ir_state->rx_invert);
+	divider = (u16) atomic_read(&ir_state->rxclk_divider);
+
+	n = count / sizeof(union cx25840_ir_fifo_rec)
+		* sizeof(union cx25840_ir_fifo_rec);
+	if (n == 0) {
+		*num = 0;
+		return 0;
+	}
+
+	n = kfifo_out_locked(&ir_state->rx_kfifo, buf, n,
+			     &ir_state->rx_kfifo_lock);
+
+	n /= sizeof(union cx25840_ir_fifo_rec);
+	*num = n * sizeof(union cx25840_ir_fifo_rec);
+
+	for (p = (union cx25840_ir_fifo_rec *) buf, i = 0; i < n; p++, i++) {
+
+		if ((p->hw_fifo_data & FIFO_RXTX_RTO) == FIFO_RXTX_RTO) {
+			/* Assume RTO was because of no IR light input */
+			u = 0;
+			v4l2_dbg(2, ir_debug, sd, "rx read: end of rx\n");
+		} else {
+			u = (p->hw_fifo_data & FIFO_RXTX_LVL) ? 1 : 0;
+			if (invert)
+				u = u ? 0 : 1;
+		}
+
+		v = (unsigned) pulse_width_count_to_ns(
+				  (u16) (p->hw_fifo_data & FIFO_RXTX), divider);
+		if (v > IR_MAX_DURATION)
+			v = IR_MAX_DURATION;
+
+		p->ir_core_data.pulse = u;
+		p->ir_core_data.duration = v;
+
+		v4l2_dbg(2, ir_debug, sd, "rx read: %10u ns  %s\n",
+			 v, u ? "mark" : "space");
+	}
+	return 0;
+}
+
+static int cx25840_ir_rx_g_parameters(struct v4l2_subdev *sd,
+				      struct v4l2_subdev_ir_parameters *p)
+{
+	struct cx25840_ir_state *ir_state = to_ir_state(sd);
+
+	if (ir_state == NULL)
+		return -ENODEV;
+
+	mutex_lock(&ir_state->rx_params_lock);
+	memcpy(p, &ir_state->rx_params,
+				      sizeof(struct v4l2_subdev_ir_parameters));
+	mutex_unlock(&ir_state->rx_params_lock);
+	return 0;
+}
+
+static int cx25840_ir_rx_shutdown(struct v4l2_subdev *sd)
+{
+	struct cx25840_ir_state *ir_state = to_ir_state(sd);
+	struct i2c_client *c;
+
+	if (ir_state == NULL)
+		return -ENODEV;
+
+	c = ir_state->c;
+	mutex_lock(&ir_state->rx_params_lock);
+
+	/* Disable or slow down all IR Rx circuits and counters */
+	irqenable_rx(sd, 0);
+	control_rx_enable(c, false);
+	control_rx_demodulation_enable(c, false);
+	control_rx_s_edge_detection(c, CNTRL_EDG_NONE);
+	filter_rx_s_min_width(c, 0);
+	cx25840_write4(c, CX25840_IR_RXCLK_REG, RXCLK_RCD);
+
+	ir_state->rx_params.shutdown = true;
+
+	mutex_unlock(&ir_state->rx_params_lock);
+	return 0;
+}
+
+static int cx25840_ir_rx_s_parameters(struct v4l2_subdev *sd,
+				      struct v4l2_subdev_ir_parameters *p)
+{
+	struct cx25840_ir_state *ir_state = to_ir_state(sd);
+	struct i2c_client *c;
+	struct v4l2_subdev_ir_parameters *o;
+	u16 rxclk_divider;
+
+	if (ir_state == NULL)
+		return -ENODEV;
+
+	if (p->shutdown)
+		return cx25840_ir_rx_shutdown(sd);
+
+	if (p->mode != V4L2_SUBDEV_IR_MODE_PULSE_WIDTH)
+		return -ENOSYS;
+
+	c = ir_state->c;
+	o = &ir_state->rx_params;
+
+	mutex_lock(&ir_state->rx_params_lock);
+
+	o->shutdown = p->shutdown;
+
+	p->mode = V4L2_SUBDEV_IR_MODE_PULSE_WIDTH;
+	o->mode = p->mode;
+
+	p->bytes_per_data_element = sizeof(union cx25840_ir_fifo_rec);
+	o->bytes_per_data_element = p->bytes_per_data_element;
+
+	/* Before we tweak the hardware, we have to disable the receiver */
+	irqenable_rx(sd, 0);
+	control_rx_enable(c, false);
+
+	control_rx_demodulation_enable(c, p->modulation);
+	o->modulation = p->modulation;
+
+	if (p->modulation) {
+		p->carrier_freq = rxclk_rx_s_carrier(c, p->carrier_freq,
+						     &rxclk_divider);
+
+		o->carrier_freq = p->carrier_freq;
+
+		p->duty_cycle = 50;
+		o->duty_cycle = p->duty_cycle;
+
+		control_rx_s_carrier_window(c, p->carrier_freq,
+					    &p->carrier_range_lower,
+					    &p->carrier_range_upper);
+		o->carrier_range_lower = p->carrier_range_lower;
+		o->carrier_range_upper = p->carrier_range_upper;
+
+		p->max_pulse_width =
+			(u32) pulse_width_count_to_ns(FIFO_RXTX, rxclk_divider);
+	} else {
+		p->max_pulse_width =
+			    rxclk_rx_s_max_pulse_width(c, p->max_pulse_width,
+						       &rxclk_divider);
+	}
+	o->max_pulse_width = p->max_pulse_width;
+	atomic_set(&ir_state->rxclk_divider, rxclk_divider);
+
+	p->noise_filter_min_width =
+			    filter_rx_s_min_width(c, p->noise_filter_min_width);
+	o->noise_filter_min_width = p->noise_filter_min_width;
+
+	p->resolution = clock_divider_to_resolution(rxclk_divider);
+	o->resolution = p->resolution;
+
+	/* FIXME - make this dependent on resolution for better performance */
+	control_rx_irq_watermark(c, RX_FIFO_HALF_FULL);
+
+	control_rx_s_edge_detection(c, CNTRL_EDG_BOTH);
+
+	o->invert_level = p->invert_level;
+	atomic_set(&ir_state->rx_invert, p->invert_level);
+
+	o->interrupt_enable = p->interrupt_enable;
+	o->enable = p->enable;
+	if (p->enable) {
+		unsigned long flags;
+
+		spin_lock_irqsave(&ir_state->rx_kfifo_lock, flags);
+		kfifo_reset(&ir_state->rx_kfifo);
+		spin_unlock_irqrestore(&ir_state->rx_kfifo_lock, flags);
+		if (p->interrupt_enable)
+			irqenable_rx(sd, IRQEN_RSE | IRQEN_RTE | IRQEN_ROE);
+		control_rx_enable(c, p->enable);
+	}
+
+	mutex_unlock(&ir_state->rx_params_lock);
+	return 0;
+}
+
+/* Transmitter */
+static int cx25840_ir_tx_write(struct v4l2_subdev *sd, u8 *buf, size_t count,
+			       ssize_t *num)
+{
+	struct cx25840_ir_state *ir_state = to_ir_state(sd);
+	struct i2c_client *c;
+
+	if (ir_state == NULL)
+		return -ENODEV;
+
+	c = ir_state->c;
+#if 0
+	/*
+	 * FIXME - the code below is an incomplete and untested sketch of what
+	 * may need to be done.  The critical part is to get 4 (or 8) pulses
+	 * from the tx_kfifo, or converted from ns to the proper units from the
+	 * input, and push them off to the hardware Tx FIFO right away, if the
+	 * HW TX fifo needs service.  The rest can be pushed to the tx_kfifo in
+	 * a less critical timeframe.  Also watch out for overruning the
+	 * tx_kfifo - don't let it happen and let the caller know not all his
+	 * pulses were written.
+	 */
+	u32 *ns_pulse = (u32 *) buf;
+	unsigned int n;
+	u32 fifo_pulse[FIFO_TX_DEPTH];
+	u32 mark;
+
+	/* Compute how much we can fit in the tx kfifo */
+	n = CX25840_IR_TX_KFIFO_SIZE - kfifo_len(ir_state->tx_kfifo);
+	n = min(n, (unsigned int) count);
+	n /= sizeof(u32);
+
+	/* FIXME - turn on Tx Fifo service interrupt
+	 * check hardware fifo level, and other stuff
+	 */
+	for (i = 0; i < n; ) {
+		for (j = 0; j < FIFO_TX_DEPTH / 2 && i < n; j++) {
+			mark = ns_pulse[i] & LEVEL_MASK;
+			fifo_pulse[j] = ns_to_pulse_width_count(
+					 ns_pulse[i] &
+					       ~LEVEL_MASK,
+					 ir_state->txclk_divider);
+			if (mark)
+				fifo_pulse[j] &= FIFO_RXTX_LVL;
+			i++;
+		}
+		kfifo_put(ir_state->tx_kfifo, (u8 *) fifo_pulse,
+							       j * sizeof(u32));
+	}
+	*num = n * sizeof(u32);
+#else
+	/* For now enable the Tx FIFO Service interrupt & pretend we did work */
+	irqenable_tx(sd, IRQEN_TSE);
+	*num = count;
+#endif
+	return 0;
+}
+
+static int cx25840_ir_tx_g_parameters(struct v4l2_subdev *sd,
+				      struct v4l2_subdev_ir_parameters *p)
+{
+	struct cx25840_ir_state *ir_state = to_ir_state(sd);
+
+	if (ir_state == NULL)
+		return -ENODEV;
+
+	mutex_lock(&ir_state->tx_params_lock);
+	memcpy(p, &ir_state->tx_params,
+				      sizeof(struct v4l2_subdev_ir_parameters));
+	mutex_unlock(&ir_state->tx_params_lock);
+	return 0;
+}
+
+static int cx25840_ir_tx_shutdown(struct v4l2_subdev *sd)
+{
+	struct cx25840_ir_state *ir_state = to_ir_state(sd);
+	struct i2c_client *c;
+
+	if (ir_state == NULL)
+		return -ENODEV;
+
+	c = ir_state->c;
+	mutex_lock(&ir_state->tx_params_lock);
+
+	/* Disable or slow down all IR Tx circuits and counters */
+	irqenable_tx(sd, 0);
+	control_tx_enable(c, false);
+	control_tx_modulation_enable(c, false);
+	cx25840_write4(c, CX25840_IR_TXCLK_REG, TXCLK_TCD);
+
+	ir_state->tx_params.shutdown = true;
+
+	mutex_unlock(&ir_state->tx_params_lock);
+	return 0;
+}
+
+static int cx25840_ir_tx_s_parameters(struct v4l2_subdev *sd,
+				      struct v4l2_subdev_ir_parameters *p)
+{
+	struct cx25840_ir_state *ir_state = to_ir_state(sd);
+	struct i2c_client *c;
+	struct v4l2_subdev_ir_parameters *o;
+	u16 txclk_divider;
+
+	if (ir_state == NULL)
+		return -ENODEV;
+
+	if (p->shutdown)
+		return cx25840_ir_tx_shutdown(sd);
+
+	if (p->mode != V4L2_SUBDEV_IR_MODE_PULSE_WIDTH)
+		return -ENOSYS;
+
+	c = ir_state->c;
+	o = &ir_state->tx_params;
+	mutex_lock(&ir_state->tx_params_lock);
+
+	o->shutdown = p->shutdown;
+
+	p->mode = V4L2_SUBDEV_IR_MODE_PULSE_WIDTH;
+	o->mode = p->mode;
+
+	p->bytes_per_data_element = sizeof(union cx25840_ir_fifo_rec);
+	o->bytes_per_data_element = p->bytes_per_data_element;
+
+	/* Before we tweak the hardware, we have to disable the transmitter */
+	irqenable_tx(sd, 0);
+	control_tx_enable(c, false);
+
+	control_tx_modulation_enable(c, p->modulation);
+	o->modulation = p->modulation;
+
+	if (p->modulation) {
+		p->carrier_freq = txclk_tx_s_carrier(c, p->carrier_freq,
+						     &txclk_divider);
+		o->carrier_freq = p->carrier_freq;
+
+		p->duty_cycle = cduty_tx_s_duty_cycle(c, p->duty_cycle);
+		o->duty_cycle = p->duty_cycle;
+
+		p->max_pulse_width =
+			(u32) pulse_width_count_to_ns(FIFO_RXTX, txclk_divider);
+	} else {
+		p->max_pulse_width =
+			    txclk_tx_s_max_pulse_width(c, p->max_pulse_width,
+						       &txclk_divider);
+	}
+	o->max_pulse_width = p->max_pulse_width;
+	atomic_set(&ir_state->txclk_divider, txclk_divider);
+
+	p->resolution = clock_divider_to_resolution(txclk_divider);
+	o->resolution = p->resolution;
+
+	/* FIXME - make this dependent on resolution for better performance */
+	control_tx_irq_watermark(c, TX_FIFO_HALF_EMPTY);
+
+	control_tx_polarity_invert(c, p->invert_carrier_sense);
+	o->invert_carrier_sense = p->invert_carrier_sense;
+
+	/*
+	 * FIXME: we don't have hardware help for IO pin level inversion
+	 * here like we have on the CX23888.
+	 * Act on this with some mix of logical inversion of data levels,
+	 * carrier polarity, and carrier duty cycle.
+	 */
+	o->invert_level = p->invert_level;
+
+	o->interrupt_enable = p->interrupt_enable;
+	o->enable = p->enable;
+	if (p->enable) {
+		/* reset tx_fifo here */
+		if (p->interrupt_enable)
+			irqenable_tx(sd, IRQEN_TSE);
+		control_tx_enable(c, p->enable);
+	}
+
+	mutex_unlock(&ir_state->tx_params_lock);
+	return 0;
+}
+
+
+/*
+ * V4L2 Subdevice Core Ops support
+ */
+int cx25840_ir_log_status(struct v4l2_subdev *sd)
+{
+	struct cx25840_state *state = to_state(sd);
+	struct i2c_client *c = state->c;
+	char *s;
+	int i, j;
+	u32 cntrl, txclk, rxclk, cduty, stats, irqen, filtr;
+
+	/* The CX23888 chip doesn't have an IR controller on the A/V core */
+	if (is_cx23888(state))
+		return 0;
+
+	cntrl = cx25840_read4(c, CX25840_IR_CNTRL_REG);
+	txclk = cx25840_read4(c, CX25840_IR_TXCLK_REG) & TXCLK_TCD;
+	rxclk = cx25840_read4(c, CX25840_IR_RXCLK_REG) & RXCLK_RCD;
+	cduty = cx25840_read4(c, CX25840_IR_CDUTY_REG) & CDUTY_CDC;
+	stats = cx25840_read4(c, CX25840_IR_STATS_REG);
+	irqen = cx25840_read4(c, CX25840_IR_IRQEN_REG);
+	if (is_cx23885(state) || is_cx23887(state))
+		irqen ^= IRQEN_MSK;
+	filtr = cx25840_read4(c, CX25840_IR_FILTR_REG) & FILTR_LPF;
+
+	v4l2_info(sd, "IR Receiver:\n");
+	v4l2_info(sd, "\tEnabled:                           %s\n",
+		  cntrl & CNTRL_RXE ? "yes" : "no");
+	v4l2_info(sd, "\tDemodulation from a carrier:       %s\n",
+		  cntrl & CNTRL_DMD ? "enabled" : "disabled");
+	v4l2_info(sd, "\tFIFO:                              %s\n",
+		  cntrl & CNTRL_RFE ? "enabled" : "disabled");
+	switch (cntrl & CNTRL_EDG) {
+	case CNTRL_EDG_NONE:
+		s = "disabled";
+		break;
+	case CNTRL_EDG_FALL:
+		s = "falling edge";
+		break;
+	case CNTRL_EDG_RISE:
+		s = "rising edge";
+		break;
+	case CNTRL_EDG_BOTH:
+		s = "rising & falling edges";
+		break;
+	default:
+		s = "??? edge";
+		break;
+	}
+	v4l2_info(sd, "\tPulse timers' start/stop trigger:  %s\n", s);
+	v4l2_info(sd, "\tFIFO data on pulse timer overflow: %s\n",
+		  cntrl & CNTRL_R ? "not loaded" : "overflow marker");
+	v4l2_info(sd, "\tFIFO interrupt watermark:          %s\n",
+		  cntrl & CNTRL_RIC ? "not empty" : "half full or greater");
+	v4l2_info(sd, "\tLoopback mode:                     %s\n",
+		  cntrl & CNTRL_LBM ? "loopback active" : "normal receive");
+	if (cntrl & CNTRL_DMD) {
+		v4l2_info(sd, "\tExpected carrier (16 clocks):      %u Hz\n",
+			  clock_divider_to_carrier_freq(rxclk));
+		switch (cntrl & CNTRL_WIN) {
+		case CNTRL_WIN_3_3:
+			i = 3;
+			j = 3;
+			break;
+		case CNTRL_WIN_4_3:
+			i = 4;
+			j = 3;
+			break;
+		case CNTRL_WIN_3_4:
+			i = 3;
+			j = 4;
+			break;
+		case CNTRL_WIN_4_4:
+			i = 4;
+			j = 4;
+			break;
+		default:
+			i = 0;
+			j = 0;
+			break;
+		}
+		v4l2_info(sd, "\tNext carrier edge window:          16 clocks "
+			  "-%1d/+%1d, %u to %u Hz\n", i, j,
+			  clock_divider_to_freq(rxclk, 16 + j),
+			  clock_divider_to_freq(rxclk, 16 - i));
+	}
+	v4l2_info(sd, "\tMax measurable pulse width:        %u us, %llu ns\n",
+		  pulse_width_count_to_us(FIFO_RXTX, rxclk),
+		  pulse_width_count_to_ns(FIFO_RXTX, rxclk));
+	v4l2_info(sd, "\tLow pass filter:                   %s\n",
+		  filtr ? "enabled" : "disabled");
+	if (filtr)
+		v4l2_info(sd, "\tMin acceptable pulse width (LPF):  %u us, "
+			  "%u ns\n",
+			  lpf_count_to_us(filtr),
+			  lpf_count_to_ns(filtr));
+	v4l2_info(sd, "\tPulse width timer timed-out:       %s\n",
+		  stats & STATS_RTO ? "yes" : "no");
+	v4l2_info(sd, "\tPulse width timer time-out intr:   %s\n",
+		  irqen & IRQEN_RTE ? "enabled" : "disabled");
+	v4l2_info(sd, "\tFIFO overrun:                      %s\n",
+		  stats & STATS_ROR ? "yes" : "no");
+	v4l2_info(sd, "\tFIFO overrun interrupt:            %s\n",
+		  irqen & IRQEN_ROE ? "enabled" : "disabled");
+	v4l2_info(sd, "\tBusy:                              %s\n",
+		  stats & STATS_RBY ? "yes" : "no");
+	v4l2_info(sd, "\tFIFO service requested:            %s\n",
+		  stats & STATS_RSR ? "yes" : "no");
+	v4l2_info(sd, "\tFIFO service request interrupt:    %s\n",
+		  irqen & IRQEN_RSE ? "enabled" : "disabled");
+
+	v4l2_info(sd, "IR Transmitter:\n");
+	v4l2_info(sd, "\tEnabled:                           %s\n",
+		  cntrl & CNTRL_TXE ? "yes" : "no");
+	v4l2_info(sd, "\tModulation onto a carrier:         %s\n",
+		  cntrl & CNTRL_MOD ? "enabled" : "disabled");
+	v4l2_info(sd, "\tFIFO:                              %s\n",
+		  cntrl & CNTRL_TFE ? "enabled" : "disabled");
+	v4l2_info(sd, "\tFIFO interrupt watermark:          %s\n",
+		  cntrl & CNTRL_TIC ? "not empty" : "half full or less");
+	v4l2_info(sd, "\tCarrier polarity:                  %s\n",
+		  cntrl & CNTRL_CPL ? "space:burst mark:noburst"
+				    : "space:noburst mark:burst");
+	if (cntrl & CNTRL_MOD) {
+		v4l2_info(sd, "\tCarrier (16 clocks):               %u Hz\n",
+			  clock_divider_to_carrier_freq(txclk));
+		v4l2_info(sd, "\tCarrier duty cycle:                %2u/16\n",
+			  cduty + 1);
+	}
+	v4l2_info(sd, "\tMax pulse width:                   %u us, %llu ns\n",
+		  pulse_width_count_to_us(FIFO_RXTX, txclk),
+		  pulse_width_count_to_ns(FIFO_RXTX, txclk));
+	v4l2_info(sd, "\tBusy:                              %s\n",
+		  stats & STATS_TBY ? "yes" : "no");
+	v4l2_info(sd, "\tFIFO service requested:            %s\n",
+		  stats & STATS_TSR ? "yes" : "no");
+	v4l2_info(sd, "\tFIFO service request interrupt:    %s\n",
+		  irqen & IRQEN_TSE ? "enabled" : "disabled");
+
+	return 0;
+}
+
+
+const struct v4l2_subdev_ir_ops cx25840_ir_ops = {
+	.rx_read = cx25840_ir_rx_read,
+	.rx_g_parameters = cx25840_ir_rx_g_parameters,
+	.rx_s_parameters = cx25840_ir_rx_s_parameters,
+
+	.tx_write = cx25840_ir_tx_write,
+	.tx_g_parameters = cx25840_ir_tx_g_parameters,
+	.tx_s_parameters = cx25840_ir_tx_s_parameters,
+};
+
+
+static const struct v4l2_subdev_ir_parameters default_rx_params = {
+	.bytes_per_data_element = sizeof(union cx25840_ir_fifo_rec),
+	.mode = V4L2_SUBDEV_IR_MODE_PULSE_WIDTH,
+
+	.enable = false,
+	.interrupt_enable = false,
+	.shutdown = true,
+
+	.modulation = true,
+	.carrier_freq = 36000, /* 36 kHz - RC-5, and RC-6 carrier */
+
+	/* RC-5: 666,667 ns = 1/36 kHz * 32 cycles * 1 mark * 0.75 */
+	/* RC-6: 333,333 ns = 1/36 kHz * 16 cycles * 1 mark * 0.75 */
+	.noise_filter_min_width = 333333, /* ns */
+	.carrier_range_lower = 35000,
+	.carrier_range_upper = 37000,
+	.invert_level = false,
+};
+
+static const struct v4l2_subdev_ir_parameters default_tx_params = {
+	.bytes_per_data_element = sizeof(union cx25840_ir_fifo_rec),
+	.mode = V4L2_SUBDEV_IR_MODE_PULSE_WIDTH,
+
+	.enable = false,
+	.interrupt_enable = false,
+	.shutdown = true,
+
+	.modulation = true,
+	.carrier_freq = 36000, /* 36 kHz - RC-5 carrier */
+	.duty_cycle = 25,      /* 25 %   - RC-5 carrier */
+	.invert_level = false,
+	.invert_carrier_sense = false,
+};
+
+int cx25840_ir_probe(struct v4l2_subdev *sd)
+{
+	struct cx25840_state *state = to_state(sd);
+	struct cx25840_ir_state *ir_state;
+	struct v4l2_subdev_ir_parameters default_params;
+
+	/* Only init the IR controller for the CX2388[57] AV Core for now */
+	if (!(is_cx23885(state) || is_cx23887(state)))
+		return 0;
+
+	ir_state = kzalloc(sizeof(struct cx25840_ir_state), GFP_KERNEL);
+	if (ir_state == NULL)
+		return -ENOMEM;
+
+	spin_lock_init(&ir_state->rx_kfifo_lock);
+	if (kfifo_alloc(&ir_state->rx_kfifo,
+			CX25840_IR_RX_KFIFO_SIZE, GFP_KERNEL)) {
+		kfree(ir_state);
+		return -ENOMEM;
+	}
+
+	ir_state->c = state->c;
+	state->ir_state = ir_state;
+
+	/* Ensure no interrupts arrive yet */
+	if (is_cx23885(state) || is_cx23887(state))
+		cx25840_write4(ir_state->c, CX25840_IR_IRQEN_REG, IRQEN_MSK);
+	else
+		cx25840_write4(ir_state->c, CX25840_IR_IRQEN_REG, 0);
+
+	mutex_init(&ir_state->rx_params_lock);
+	memcpy(&default_params, &default_rx_params,
+		       sizeof(struct v4l2_subdev_ir_parameters));
+	v4l2_subdev_call(sd, ir, rx_s_parameters, &default_params);
+
+	mutex_init(&ir_state->tx_params_lock);
+	memcpy(&default_params, &default_tx_params,
+		       sizeof(struct v4l2_subdev_ir_parameters));
+	v4l2_subdev_call(sd, ir, tx_s_parameters, &default_params);
+
+	return 0;
+}
+
+int cx25840_ir_remove(struct v4l2_subdev *sd)
+{
+	struct cx25840_state *state = to_state(sd);
+	struct cx25840_ir_state *ir_state = to_ir_state(sd);
+
+	if (ir_state == NULL)
+		return -ENODEV;
+
+	cx25840_ir_rx_shutdown(sd);
+	cx25840_ir_tx_shutdown(sd);
+
+	kfifo_free(&ir_state->rx_kfifo);
+	kfree(ir_state);
+	state->ir_state = NULL;
+	return 0;
+}

drivers/media/video/gspca/gspca.c

@@ -55,7 +55,7 @@ MODULE_AUTHOR("Jean-François Moine <http://moinejf.free.fr>");
 MODULE_DESCRIPTION("GSPCA USB Camera Driver");
 MODULE_LICENSE("GPL");
 
-#define DRIVER_VERSION_NUMBER	KERNEL_VERSION(2, 9, 0)
+#define DRIVER_VERSION_NUMBER	KERNEL_VERSION(2, 10, 0)
 
 #ifdef GSPCA_DEBUG
 int gspca_debug = D_ERR | D_PROBE;
@@ -440,10 +440,15 @@ void gspca_frame_add(struct gspca_dev *gspca_dev,
 		frame->v4l2_buf.sequence = ++gspca_dev->sequence;
 		gspca_dev->image = frame->data;
 		gspca_dev->image_len = 0;
-	} else if (gspca_dev->last_packet_type == DISCARD_PACKET) {
-		if (packet_type == LAST_PACKET)
-			gspca_dev->last_packet_type = packet_type;
-		return;
+	} else {
+		switch (gspca_dev->last_packet_type) {
+		case DISCARD_PACKET:
+			if (packet_type == LAST_PACKET)
+				gspca_dev->last_packet_type = packet_type;
+			return;
+		case LAST_PACKET:
+			return;
+		}
 	}
 
 	/* append the packet to the frame buffer */
@@ -454,6 +459,12 @@ void gspca_frame_add(struct gspca_dev *gspca_dev,
 				gspca_dev->frsz);
 			packet_type = DISCARD_PACKET;
 		} else {
+/* !! image is NULL only when last pkt is LAST or DISCARD
+			if (gspca_dev->image == NULL) {
+				err("gspca_frame_add() image == NULL");
+				return;
+			}
+ */
 			memcpy(gspca_dev->image + gspca_dev->image_len,
 				data, len);
 			gspca_dev->image_len += len;

drivers/media/video/gspca/sonixj.c

@@ -66,7 +66,11 @@ struct sd {
 #define BRIDGE_SN9C110 2
 #define BRIDGE_SN9C120 3
 	u8 sensor;			/* Type of image sensor chip */
-enum {
+	u8 i2c_addr;
+
+	u8 jpeg_hdr[JPEG_HDR_SZ];
+};
+enum sensors {
 	SENSOR_ADCM1700,
 	SENSOR_GC0307,
 	SENSOR_HV7131R,
@@ -81,10 +85,6 @@ enum {
 	SENSOR_PO2030N,
 	SENSOR_SOI768,
 	SENSOR_SP80708,
-} sensors;
-	u8 i2c_addr;
-
-	u8 jpeg_hdr[JPEG_HDR_SZ];
 };
 
 /* V4L2 controls supported by the driver */

drivers/media/video/gspca/sq930x.c

@@ -23,7 +23,6 @@
 #define MODULE_NAME "sq930x"
 
 #include "gspca.h"
-#include "jpeg.h"
 
 MODULE_AUTHOR("Jean-Francois Moine <http://moinejf.free.fr>\n"
 		"Gerard Klaver <gerard at gkall dot hobby dot nl\n"
@@ -31,8 +30,6 @@ MODULE_AUTHOR("Jean-Francois Moine <http://moinejf.free.fr>\n"
 MODULE_DESCRIPTION("GSPCA/SQ930x USB Camera Driver");
 MODULE_LICENSE("GPL");
 
-#define BULK_TRANSFER_LEN 5128
-
 /* Structure to hold all of our device specific stuff */
 struct sd {
 	struct gspca_dev gspca_dev;	/* !! must be the first item */
@@ -40,28 +37,20 @@ struct sd {
 	u16 expo;
 	u8 gain;
 
-	u8 quality;		/* webcam quality 0..3 */
-#define QUALITY_DEF 1
-
-	u8 gpio[2];
-
-	u8 eof_len;
 	u8 do_ctrl;
-
+	u8 gpio[2];
 	u8 sensor;
-enum {
+	u8 type;
+#define Generic 0
+#define Creative_live_motion 1
+};
+enum sensors {
 	SENSOR_ICX098BQ,
 	SENSOR_LZ24BP,
 	SENSOR_MI0360,
-	SENSOR_MT9V111,
+	SENSOR_MT9V111,		/* = MI360SOC */
 	SENSOR_OV7660,
 	SENSOR_OV9630,
-} sensors;
-	u8 type;
-#define Generic 0
-#define Creative_live_motion 1
-
-	u8 jpeg_hdr[JPEG_HDR_SZ];
 };
 
 static int sd_setexpo(struct gspca_dev *gspca_dev, __s32 val);
@@ -78,7 +67,7 @@ static const struct ctrl sd_ctrls[] = {
 		.minimum = 0x0001,
 		.maximum = 0x0fff,
 		.step = 1,
-#define EXPO_DEF 0x027d
+#define EXPO_DEF 0x0356
 		.default_value = EXPO_DEF,
 	    },
 	    .set = sd_setexpo,
@@ -92,7 +81,7 @@ static const struct ctrl sd_ctrls[] = {
 		.minimum = 0x01,
 		.maximum = 0xff,
 		.step = 1,
-#define GAIN_DEF 0x61
+#define GAIN_DEF 0x8d
 		.default_value = GAIN_DEF,
 	    },
 	    .set = sd_setgain,
@@ -101,30 +90,18 @@ static const struct ctrl sd_ctrls[] = {
 };
 
 static struct v4l2_pix_format vga_mode[] = {
-	{160, 120, V4L2_PIX_FMT_JPEG, V4L2_FIELD_NONE,
-		.bytesperline = 160,
-		.sizeimage = 160 * 120 * 5 / 8 + 590,
-		.colorspace = V4L2_COLORSPACE_JPEG,
-		.priv = 0},
-	{320, 240, V4L2_PIX_FMT_JPEG, V4L2_FIELD_NONE,
+	{320, 240, V4L2_PIX_FMT_SRGGB8, V4L2_FIELD_NONE,
 		.bytesperline = 320,
-		.sizeimage = 320 * 240 * 4 / 8 + 590,
-		.colorspace = V4L2_COLORSPACE_JPEG,
-		.priv = 1},
-	{640, 480, V4L2_PIX_FMT_JPEG, V4L2_FIELD_NONE,
+		.sizeimage = 320 * 240,
+		.colorspace = V4L2_COLORSPACE_SRGB,
+		.priv = 0},
+	{640, 480, V4L2_PIX_FMT_SRGGB8, V4L2_FIELD_NONE,
 		.bytesperline = 640,
-		.sizeimage = 640 * 480 * 3 / 8 + 590,
-		.colorspace = V4L2_COLORSPACE_JPEG,
-		.priv = 2},
+		.sizeimage = 640 * 480,
+		.colorspace = V4L2_COLORSPACE_SRGB,
+		.priv = 1},
 };
 
-/* JPEG quality indexed by webcam quality */
-#define QUAL_0 90
-#define QUAL_1 85
-#define QUAL_2 75
-#define QUAL_3 70
-static const u8 quality_tb[4] = { QUAL_0, QUAL_1, QUAL_2, QUAL_3 };
-
 /* sq930x registers */
 #define SQ930_CTRL_UCBUS_IO	0x0001
 #define SQ930_CTRL_I2C_IO	0x0002
@@ -302,7 +279,7 @@ static const struct i2c_write_cmd mt9v111_init_0[] = {
 	{0x01, 0x0001},		/* select IFP/SOC registers */
 	{0x06, 0x300c},		/* operating mode control */
 	{0x08, 0xcc00},		/* output format control (RGB) */
-	{0x01, 0x0004},		/* select core registers */
+	{0x01, 0x0004},		/* select sensor core registers */
 };
 static const struct i2c_write_cmd mt9v111_init_1[] = {
 	{0x03, 0x01e5},		/* window height */
@@ -330,7 +307,8 @@ static const struct i2c_write_cmd mt9v111_init_3[] = {
 	{0x62, 0x0405},
 };
 static const struct i2c_write_cmd mt9v111_init_4[] = {
-	{0x05, 0x00ce},		/* horizontal blanking */
+/*	{0x05, 0x00ce}, */
+	{0x05, 0x005d},		/* horizontal blanking */
 };
 
 static const struct ucbus_write_cmd ov7660_start_0[] = {
@@ -343,78 +321,58 @@ static const struct ucbus_write_cmd ov9630_start_0[] = {
 	{0xf334, 0x3e}, {0xf335, 0xf8}, {0xf33f, 0x03}
 };
 
+/* start parameters indexed by [sensor][mode] */
 static const struct cap_s {
 	u8	cc_sizeid;
 	u8	cc_bytes[32];
-} capconfig[4][3] = {
+} capconfig[4][2] = {
 	[SENSOR_ICX098BQ] = {
-		{0,				/* JPEG, 160x120 */
+		{2,				/* Bayer 320x240 */
+		  {0x05, 0x1f, 0x20, 0x0e, 0x00, 0x9f, 0x02, 0xee,
+		   0x01, 0x01, 0x00, 0x08, 0x18, 0x12, 0x78, 0xc8,
+		   0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x0,
+		   0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00} },
+		{4,				/* Bayer 640x480 */
 		  {0x01, 0x1f, 0x20, 0x0e, 0x00, 0x9f, 0x02, 0xee,
 		   0x01, 0x02, 0x00, 0x08, 0x18, 0x12, 0x78, 0xc8,
-		   0x02, 0x8b, 0x00, 0x8b, 0x00, 0x41, 0x01, 0x41,
-		   0x01, 0x41, 0x01, 0x05, 0x40, 0x01, 0xf0, 0x00} },
-		{2,				/* JPEG, 320x240 */
-		  {0x01, 0x1f, 0x20, 0x0e, 0x00, 0x9f, 0x02, 0xee,
-		   0x01, 0x02, 0x00, 0x08, 0x18, 0x12, 0x78, 0xc8,
-		   0x02, 0xdf, 0x01, 0x00, 0x00, 0x3f, 0x01, 0x3f,
-		   0x01, 0x00, 0x00, 0x05, 0x40, 0x01, 0xf0, 0x00} },
-		{4,				/* JPEG, 640x480 */
-		  {0x01, 0x22, 0x20, 0x0e, 0x00, 0xa2, 0x02, 0xf0,
-		   0x01, 0x02, 0x00, 0x08, 0x18, 0x12, 0x78, 0xc8,
-		   0x07, 0xe1, 0x01, 0xe1, 0x01, 0x3f, 0x01, 0x3f,
-		   0x01, 0x3f, 0x01, 0x05, 0x80, 0x02, 0xe0, 0x01} },
+		   0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+		   0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00} },
 	},
 	[SENSOR_LZ24BP] = {
-		{0,				/* JPEG, 160x120 */
-		  {0x01, 0x1f, 0x20, 0x0e, 0x00, 0x9f, 0x02, 0xee,
-		   0x01, 0x02, 0x00, 0x08, 0x18, 0x12, 0x78, 0xc8,
-		   0x02, 0x8b, 0x00, 0x8b, 0x00, 0x41, 0x01, 0x41,
-		   0x01, 0x41, 0x01, 0x05, 0x40, 0x01, 0xf0, 0x00} },
-		{2,				/* JPEG, 320x240 */
+		{2,				/* Bayer 320x240 */
+		  {0x05, 0x22, 0x20, 0x0e, 0x00, 0xa2, 0x02, 0xee,
+		   0x01, 0x01, 0x00, 0x08, 0x18, 0x12, 0x78, 0xc8,
+		   0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+		   0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00} },
+		{4,				/* Bayer 640x480 */
 		  {0x01, 0x22, 0x20, 0x0e, 0x00, 0xa2, 0x02, 0xee,
 		   0x01, 0x02, 0x00, 0x08, 0x18, 0x12, 0x78, 0xc8,
-		   0x02, 0xdf, 0x01, 0x00, 0x00, 0x3f, 0x01, 0x3f,
-		   0x01, 0x00, 0x00, 0x05, 0x40, 0x01, 0xf0, 0x00} },
-		{4,				/* JPEG, 640x480 */
-		  {0x01, 0x22, 0x20, 0x0e, 0x00, 0xa2, 0x02, 0xf0,
-		   0x01, 0x02, 0x00, 0x08, 0x18, 0x12, 0x78, 0xc8,
-		   0x07, 0xe1, 0x01, 0xe1, 0x01, 0x3f, 0x01, 0x3f,
-		   0x01, 0x3f, 0x01, 0x05, 0x80, 0x02, 0xe0, 0x01} },
+		   0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+		   0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00} },
 	},
 	[SENSOR_MI0360] = {
-		{0,				/* JPEG, 160x120 */
-		  {0x05, 0x3d, 0x20, 0x0b, 0x00, 0xbd, 0x02, 0x0b,
-		   0x02, 0x02, 0x00, 0x08, 0x18, 0x12, 0x78, 0xc8,
-		   0x02, 0x01, 0x01, 0x01, 0x01, 0x9f, 0x00, 0x9f,
-		   0x00, 0x9f, 0x01, 0x05, 0xa0, 0x00, 0x80, 0x00} },
-		{2,				/* JPEG, 320x240 */
+		{2,				/* Bayer 320x240 */
+		  {0x05, 0x02, 0x20, 0x01, 0x20, 0x82, 0x02, 0xe1,
+		   0x01, 0x01, 0x00, 0x08, 0x18, 0x12, 0x78, 0xc8,
+		   0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+		   0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00} },
+		{4,				/* Bayer 640x480 */
 		  {0x01, 0x02, 0x20, 0x01, 0x20, 0x82, 0x02, 0xe1,
-/*fixme				       03		       e3 */
 		   0x01, 0x02, 0x00, 0x08, 0x18, 0x12, 0x78, 0xc8,
-		   0x02, 0xdf, 0x01, 0x00, 0x00, 0x3f, 0x01, 0x3f,
-		   0x01, 0x00, 0x00, 0x05, 0x40, 0x01, 0xf0, 0x00} },
-		{4,				/* JPEG, 640x480 */
-		  {0x01, 0x02, 0x20, 0x01, 0x20, 0x82, 0x02, 0xe3,
-		   0x01, 0x02, 0x00, 0x08, 0x18, 0x12, 0x78, 0xc8,
-		   0x07, 0xe1, 0x01, 0xe1, 0x01, 0x3f, 0x01, 0x3f,
-		   0x01, 0x3f, 0x01, 0x05, 0x80, 0x02, 0xe0, 0x01} },
+		   0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+		   0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00} },
 	},
 	[SENSOR_MT9V111] = {
-		{0,				/* JPEG, 160x120 */
-		  {0x05, 0x3d, 0x20, 0x0b, 0x00, 0xbd, 0x02, 0x0b,
-		   0x02, 0x02, 0x00, 0x08, 0x18, 0x12, 0x78, 0xc8,
-		   0x02, 0x01, 0x01, 0x01, 0x01, 0x9f, 0x00, 0x9f,
-		   0x00, 0x9f, 0x01, 0x05, 0xa0, 0x00, 0x80, 0x00} },
-		{2,				/* JPEG, 320x240 */
-		  {0x01, 0x02, 0x20, 0x03, 0x20, 0x82, 0x02, 0xe3,
-		   0x01, 0x02, 0x00, 0x08, 0x18, 0x12, 0x78, 0xc8,
-		   0x02, 0xdf, 0x01, 0x00, 0x00, 0x3f, 0x01, 0x3f,
-		   0x01, 0x00, 0x00, 0x05, 0x40, 0x01, 0xf0, 0x00} },
-		{4,				/* JPEG, 640x480 */
-		  {0x01, 0x02, 0x20, 0x03, 0x20, 0x82, 0x02, 0xe3,
+		{2,				/* Bayer 320x240 */
+		  {0x05, 0x02, 0x20, 0x01, 0x20, 0x82, 0x02, 0xe1,
+		   0x01, 0x01, 0x00, 0x08, 0x18, 0x12, 0x78, 0xc8,
+		   0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+		   0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00} },
+		{4,				/* Bayer 640x480 */
+		  {0x01, 0x02, 0x20, 0x01, 0x20, 0x82, 0x02, 0xe1,
 		   0x01, 0x02, 0x00, 0x08, 0x18, 0x12, 0x78, 0xc8,
-		   0x07, 0xe1, 0x01, 0xe1, 0x01, 0x3f, 0x01, 0x3f,
-		   0x01, 0x3f, 0x01, 0x05, 0x80, 0x02, 0xe0, 0x01} },
+		   0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+		   0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00} },
 	},
 };
 
@@ -864,7 +822,7 @@ static void setexposure(struct gspca_dev *gspca_dev)
 		buf[i++] = 0x35;	/* reg = global gain */
 		buf[i++] = 0x00;	/* val H */
 		buf[i++] = sensor->i2c_dum;
-		buf[i++] = sd->gain;	/* val L */
+		buf[i++] = 0x80 + sd->gain / 2; /* val L */
 		buf[i++] = 0x00;
 		buf[i++] = 0x00;
 		buf[i++] = 0x00;
@@ -889,10 +847,7 @@ static int sd_config(struct gspca_dev *gspca_dev,
 	cam->nmodes = ARRAY_SIZE(vga_mode);
 
 	cam->bulk = 1;
-	cam->bulk_size = BULK_TRANSFER_LEN;
-/*	cam->bulk_nurbs = 2;	fixme: if no setexpo sync */
 
-	sd->quality = QUALITY_DEF;
 	sd->gain = GAIN_DEF;
 	sd->expo = EXPO_DEF;
 
@@ -945,13 +900,10 @@ static int sd_init(struct gspca_dev *gspca_dev)
 	if (sd->sensor == SENSOR_MI0360) {
 
 		/* no sensor probe for icam tracer */
-		if (gspca_dev->usb_buf[5] == 0xf6) {	/* if CMOS */
+		if (gspca_dev->usb_buf[5] == 0xf6)	/* if CMOS */
 			sd->sensor = SENSOR_ICX098BQ;
-			gspca_dev->cam.cam_mode = &vga_mode[1];
-			gspca_dev->cam.nmodes = 1;	/* only 320x240 */
-		} else {
+		else
 			cmos_probe(gspca_dev);
-		}
 	}
 
 	PDEBUG(D_PROBE, "Sensor %s", sensor_tb[sd->sensor].name);
@@ -960,51 +912,24 @@ static int sd_init(struct gspca_dev *gspca_dev)
 	return gspca_dev->usb_err;
 }
 
-/* special function to create the quantization tables of the JPEG header */
-static void sd_jpeg_set_qual(u8 *jpeg_hdr,
-				int quality)
-{
-	int i, sc1, sc2;
-
-	quality = quality_tb[quality];	/* convert to JPEG quality */
-/*
- * approximative qualities for Y and U/V:
- *	quant = 0:94%/91% 1:91%/87% 2:82%/73% 3:69%/56%
- * should have:
- *	quant = 0:94%/91% 1:91%/87.5% 2:81.5%/72% 3:69%/54.5%
- */
-	sc1 = 200 - quality * 2;
-	quality = quality * 7 / 5 - 40;		/* UV quality */
-	sc2 = 200 - quality * 2;
-	for (i = 0; i < 64; i++) {
-		jpeg_hdr[JPEG_QT0_OFFSET + i] =
-			(jpeg_head[JPEG_QT0_OFFSET + i] * sc1 + 50) / 100;
-		jpeg_hdr[JPEG_QT1_OFFSET + i] =
-			(jpeg_head[JPEG_QT1_OFFSET + i] * sc2 + 50) / 100;
-	}
-}
-
 /* send the start/stop commands to the webcam */
 static void send_start(struct gspca_dev *gspca_dev)
 {
 	struct sd *sd = (struct sd *) gspca_dev;
 	const struct cap_s *cap;
-	int mode, quality;
+	int mode;
 
 	mode = gspca_dev->cam.cam_mode[gspca_dev->curr_mode].priv;
 	cap = &capconfig[sd->sensor][mode];
-	quality = sd->quality;
-	reg_wb(gspca_dev, (quality << 12)
-				 | 0x0a00	/* 900 for Bayer */
-				 | SQ930_CTRL_CAP_START,
-			0x0500			/* a00 for Bayer */
-				 | cap->cc_sizeid,
+	reg_wb(gspca_dev, 0x0900 | SQ930_CTRL_CAP_START,
+			0x0a00 | cap->cc_sizeid,
 			cap->cc_bytes, 32);
-};
+}
+
 static void send_stop(struct gspca_dev *gspca_dev)
 {
 	reg_w(gspca_dev, SQ930_CTRL_CAP_STOP, 0);
-};
+}
 
 /* function called at start time before URB creation */
 static int sd_isoc_init(struct gspca_dev *gspca_dev)
@@ -1013,6 +938,7 @@ static int sd_isoc_init(struct gspca_dev *gspca_dev)
 
 	gspca_dev->cam.bulk_nurbs = 1;	/* there must be one URB only */
 	sd->do_ctrl = 0;
+	gspca_dev->cam.bulk_size = gspca_dev->width * gspca_dev->height + 8;
 	return 0;
 }
 
@@ -1022,11 +948,6 @@ static int sd_start(struct gspca_dev *gspca_dev)
 	struct sd *sd = (struct sd *) gspca_dev;
 	int mode;
 
-	/* initialize the JPEG header */
-	jpeg_define(sd->jpeg_hdr, gspca_dev->height, gspca_dev->width,
-			0x21);		/* JPEG 422 */
-	sd_jpeg_set_qual(sd->jpeg_hdr, sd->quality);
-
 	bridge_init(sd);
 	global_init(sd, 0);
 	msleep(100);
@@ -1071,7 +992,7 @@ static int sd_start(struct gspca_dev *gspca_dev)
 				ARRAY_SIZE(lz24bp_start_2),
 				6);
 		mode = gspca_dev->cam.cam_mode[gspca_dev->curr_mode].priv;
-		lz24bp_ppl(sd, mode == 2 ? 0x0564 : 0x0310);
+		lz24bp_ppl(sd, mode == 1 ? 0x0564 : 0x0310);
 		msleep(10);
 		break;
 	case SENSOR_MI0360:
@@ -1095,7 +1016,7 @@ static int sd_start(struct gspca_dev *gspca_dev)
 		/* 1st start */
 		send_start(gspca_dev);
 		msleep(60);
-		reg_w(gspca_dev, SQ930_CTRL_CAP_STOP, 0x0000);
+		send_stop(gspca_dev);
 
 		i2c_write(sd,
 			mi0360_start_4, ARRAY_SIZE(mi0360_start_4));
@@ -1113,7 +1034,7 @@ static int sd_start(struct gspca_dev *gspca_dev)
 				ARRAY_SIZE(mt9v111_init_2));
 		ucbus_write(gspca_dev, mt9v111_start_1,
 				ARRAY_SIZE(mt9v111_start_1),
-				8);
+				5);
 		i2c_write(sd, mt9v111_init_3,
 				ARRAY_SIZE(mt9v111_init_3));
 		i2c_write(sd, mt9v111_init_4,
@@ -1125,8 +1046,6 @@ static int sd_start(struct gspca_dev *gspca_dev)
 out:
 	msleep(1000);
 
-	sd->eof_len = 0;	/* init packet scan */
-
 	if (sd->sensor == SENSOR_MT9V111)
 		gpio_set(sd, SQ930_GPIO_DFL_LED, SQ930_GPIO_DFL_LED);
 
@@ -1166,94 +1085,17 @@ static void sd_dq_callback(struct gspca_dev *gspca_dev)
 	msleep(100);
 }
 
-/* move a packet adding 0x00 after 0xff */
-static void add_packet(struct gspca_dev *gspca_dev,
-			u8 *data,
-			int len)
-{
-	int i;
-
-	i = 0;
-	do {
-		if (data[i] == 0xff) {
-			gspca_frame_add(gspca_dev, INTER_PACKET,
-					data, i + 1);
-			len -= i;
-			data += i;
-			*data = 0x00;
-			i = 0;
-		}
-	} while (++i < len);
-	gspca_frame_add(gspca_dev, INTER_PACKET, data, len);
-}
-
-/* end a frame and start a new one */
-static void eof_sof(struct gspca_dev *gspca_dev)
-{
-	struct sd *sd = (struct sd *) gspca_dev;
-	static const u8 ffd9[] = {0xff, 0xd9};
-
-	/* if control set, stop bulk transfer */
-	if (sd->do_ctrl
-	 && gspca_dev->last_packet_type == INTER_PACKET)
-		gspca_dev->cam.bulk_nurbs = 0;
-	gspca_frame_add(gspca_dev, LAST_PACKET,
-			ffd9, 2);
-	gspca_frame_add(gspca_dev, FIRST_PACKET,
-			sd->jpeg_hdr, JPEG_HDR_SZ);
-}
-
 static void sd_pkt_scan(struct gspca_dev *gspca_dev,
 			u8 *data,		/* isoc packet */
 			int len)		/* iso packet length */
 {
 	struct sd *sd = (struct sd *) gspca_dev;
-	u8 *p;
-	int l;
-
-	len -= 8;	/* ignore last 8 bytes (00 00 55 aa 55 aa 00 00) */
-
-	/*
-	 * the end/start of frame is indicated by
-	 *	0x00 * 16 -  0xab * 8
-	 * aligned on 8 bytes boundary
-	 */
-	if (sd->eof_len != 0) {		/* if 'abababab' in previous pkt */
-		if (*((u32 *) data) == 0xabababab) {
-				/*fixme: should remove previous 0000ababab*/
-			eof_sof(gspca_dev);
-			data += 4;
-			len -= 4;
-		}
-		sd->eof_len = 0;
-	}
-	p = data;
-	l = len;
-	for (;;) {
-		if (*((u32 *) p) == 0xabababab) {
-			if (l < 8) {		/* (may be 4 only) */
-				sd->eof_len = 1;
-				break;
-			}
-			if (*((u32 *) p + 1) == 0xabababab) {
-				add_packet(gspca_dev, data, p - data - 16);
-						/* remove previous zeros */
-				eof_sof(gspca_dev);
-				p += 8;
-				l -= 8;
-				if (l <= 0)
-					return;
-				len = l;
-				data = p;
-				continue;
-			}
-		}
-		p += 4;
-		l -= 4;
-		if (l <= 0)
-			break;
-	}
-	add_packet(gspca_dev, data, len);
+
+	if (sd->do_ctrl)
+		gspca_dev->cam.bulk_nurbs = 0;
+	gspca_frame_add(gspca_dev, FIRST_PACKET, NULL, 0);
+	gspca_frame_add(gspca_dev, INTER_PACKET, data, len - 8);
+	gspca_frame_add(gspca_dev, LAST_PACKET, NULL, 0);
 }
 
 static int sd_setgain(struct gspca_dev *gspca_dev, __s32 val)
@@ -1291,45 +1133,6 @@ static int sd_getexpo(struct gspca_dev *gspca_dev, __s32 *val)
 	return 0;
 }
 
-static int sd_set_jcomp(struct gspca_dev *gspca_dev,
-			struct v4l2_jpegcompression *jcomp)
-{
-	struct sd *sd = (struct sd *) gspca_dev;
-	int quality;
-
-	if (jcomp->quality >= (QUAL_0 + QUAL_1) / 2)
-		quality = 0;
-	else if (jcomp->quality >= (QUAL_1 + QUAL_2) / 2)
-		quality = 1;
-	else if (jcomp->quality >= (QUAL_2 + QUAL_3) / 2)
-		quality = 2;
-	else
-		quality = 3;
-
-	if (quality != sd->quality) {
-		sd->quality = quality;
-		if (gspca_dev->streaming) {
-			send_stop(gspca_dev);
-			sd_jpeg_set_qual(sd->jpeg_hdr, sd->quality);
-			msleep(70);
-			send_start(gspca_dev);
-		}
-	}
-	return gspca_dev->usb_err;
-}
-
-static int sd_get_jcomp(struct gspca_dev *gspca_dev,
-			struct v4l2_jpegcompression *jcomp)
-{
-	struct sd *sd = (struct sd *) gspca_dev;
-
-	memset(jcomp, 0, sizeof *jcomp);
-	jcomp->quality = quality_tb[sd->quality];
-	jcomp->jpeg_markers = V4L2_JPEG_MARKER_DHT
-			| V4L2_JPEG_MARKER_DQT;
-	return 0;
-}
-
 /* sub-driver description */
 static const struct sd_desc sd_desc = {
 	.name   = MODULE_NAME,
@@ -1342,8 +1145,6 @@ static const struct sd_desc sd_desc = {
 	.stopN  = sd_stopN,
 	.pkt_scan = sd_pkt_scan,
 	.dq_callback = sd_dq_callback,
-	.get_jcomp = sd_get_jcomp,
-	.set_jcomp = sd_set_jcomp,
 };
 
 /* Table of supported USB devices */

drivers/media/video/gspca/t613.c

@@ -55,12 +55,12 @@ struct sd {
 	u8 effect;
 
 	u8 sensor;
-enum {
+};
+enum sensors {
 	SENSOR_OM6802,
 	SENSOR_OTHER,
 	SENSOR_TAS5130A,
 	SENSOR_LT168G,		/* must verify if this is the actual model */
-} sensors;
 };
 
 /* V4L2 controls supported by the driver */

drivers/media/video/gspca/vc032x.c

@@ -39,6 +39,10 @@ struct sd {
 	u8 vflip;
 	u8 lightfreq;
 	s8 sharpness;
+	u16 exposure;
+	u8 gain;
+	u8 autogain;
+	u8 backlight;
 
 	u8 image_offset;
 
@@ -77,6 +81,14 @@ static int sd_setfreq(struct gspca_dev *gspca_dev, __s32 val);
 static int sd_getfreq(struct gspca_dev *gspca_dev, __s32 *val);
 static int sd_setsharpness(struct gspca_dev *gspca_dev, __s32 val);
 static int sd_getsharpness(struct gspca_dev *gspca_dev, __s32 *val);
+static int sd_setgain(struct gspca_dev *gspca_dev, __s32 val);
+static int sd_getgain(struct gspca_dev *gspca_dev, __s32 *val);
+static int sd_setexposure(struct gspca_dev *gspca_dev, __s32 val);
+static int sd_getexposure(struct gspca_dev *gspca_dev, __s32 *val);
+static int sd_setautogain(struct gspca_dev *gspca_dev, __s32 val);
+static int sd_getautogain(struct gspca_dev *gspca_dev, __s32 *val);
+static int sd_setbacklight(struct gspca_dev *gspca_dev, __s32 val);
+static int sd_getbacklight(struct gspca_dev *gspca_dev, __s32 *val);
 
 static const struct ctrl sd_ctrls[] = {
 #define BRIGHTNESS_IDX 0
@@ -185,6 +197,66 @@ static const struct ctrl sd_ctrls[] = {
 	 .set = sd_setsharpness,
 	 .get = sd_getsharpness,
 	 },
+#define GAIN_IDX 7
+	{
+	    {
+		.id      = V4L2_CID_GAIN,
+		.type    = V4L2_CTRL_TYPE_INTEGER,
+		.name    = "Gain",
+		.minimum = 0,
+		.maximum = 78,
+		.step    = 1,
+#define GAIN_DEF 0
+		.default_value = GAIN_DEF,
+	    },
+	    .set = sd_setgain,
+	    .get = sd_getgain,
+	},
+#define EXPOSURE_IDX 8
+	{
+		{
+			.id = V4L2_CID_EXPOSURE,
+			.type = V4L2_CTRL_TYPE_INTEGER,
+			.name = "Exposure",
+#define EXPOSURE_DEF 450
+			.minimum = 0,
+			.maximum = 4095,
+			.step = 1,
+			.default_value = EXPOSURE_DEF,
+		},
+		.set = sd_setexposure,
+		.get = sd_getexposure,
+	},
+#define AUTOGAIN_IDX 9
+	{
+		{
+			.id = V4L2_CID_AUTOGAIN,
+			.type = V4L2_CTRL_TYPE_BOOLEAN,
+			.name = "Automatic Gain and Exposure",
+			.minimum = 0,
+			.maximum = 1,
+			.step = 1,
+#define AUTOGAIN_DEF 1
+			.default_value = AUTOGAIN_DEF,
+		},
+		.set = sd_setautogain,
+		.get = sd_getautogain,
+	},
+#define BACKLIGHT_IDX 10
+	{
+		{
+			.id = V4L2_CID_BACKLIGHT_COMPENSATION,
+			.type = V4L2_CTRL_TYPE_BOOLEAN,
+			.name = "Backlight Compensation",
+			.minimum = 0,
+			.maximum = 15,
+			.step = 1,
+#define BACKLIGHT_DEF 15
+			.default_value = BACKLIGHT_DEF,
+		},
+		.set = sd_setbacklight,
+		.get = sd_getbacklight,
+	},
 };
 
 /* table of the disabled controls */
@@ -192,33 +264,51 @@ static u32 ctrl_dis[] = {
 /* SENSOR_HV7131R 0 */
 	(1 << BRIGHTNESS_IDX) | (1 << CONTRAST_IDX) | (1 << COLORS_IDX)
 		| (1 << HFLIP_IDX) | (1 << VFLIP_IDX) | (1 << LIGHTFREQ_IDX)
-		| (1 << SHARPNESS_IDX),
+		| (1 << SHARPNESS_IDX)
+		| (1 << GAIN_IDX) | (1 << EXPOSURE_IDX)
+		| (1 << AUTOGAIN_IDX) | (1 << BACKLIGHT_IDX),
 /* SENSOR_MI0360 1 */
 	(1 << BRIGHTNESS_IDX) | (1 << CONTRAST_IDX) | (1 << COLORS_IDX)
 		| (1 << HFLIP_IDX) | (1 << VFLIP_IDX) | (1 << LIGHTFREQ_IDX)
-		| (1 << SHARPNESS_IDX),
+		| (1 << SHARPNESS_IDX)
+		| (1 << GAIN_IDX) | (1 << EXPOSURE_IDX)
+		| (1 << AUTOGAIN_IDX) | (1 << BACKLIGHT_IDX),
 /* SENSOR_MI1310_SOC 2 */
 	(1 << BRIGHTNESS_IDX) | (1 << CONTRAST_IDX) | (1 << COLORS_IDX)
-		| (1 << LIGHTFREQ_IDX) | (1 << SHARPNESS_IDX),
+		| (1 << LIGHTFREQ_IDX) | (1 << SHARPNESS_IDX)
+		| (1 << GAIN_IDX) | (1 << EXPOSURE_IDX)
+		| (1 << AUTOGAIN_IDX) | (1 << BACKLIGHT_IDX),
 /* SENSOR_MI1320 3 */
 	(1 << BRIGHTNESS_IDX) | (1 << CONTRAST_IDX) | (1 << COLORS_IDX)
-		| (1 << LIGHTFREQ_IDX) | (1 << SHARPNESS_IDX),
+		| (1 << LIGHTFREQ_IDX) | (1 << SHARPNESS_IDX)
+		| (1 << GAIN_IDX) | (1 << EXPOSURE_IDX)
+		| (1 << AUTOGAIN_IDX) | (1 << BACKLIGHT_IDX),
 /* SENSOR_MI1320_SOC 4 */
 	(1 << BRIGHTNESS_IDX) | (1 << CONTRAST_IDX) | (1 << COLORS_IDX)
-		| (1 << LIGHTFREQ_IDX) | (1 << SHARPNESS_IDX),
+		| (1 << LIGHTFREQ_IDX) | (1 << SHARPNESS_IDX)
+		| (1 << GAIN_IDX) | (1 << EXPOSURE_IDX)
+		| (1 << AUTOGAIN_IDX) | (1 << BACKLIGHT_IDX),
 /* SENSOR_OV7660 5 */
 	(1 << BRIGHTNESS_IDX) | (1 << CONTRAST_IDX) | (1 << COLORS_IDX)
-		| (1 << LIGHTFREQ_IDX) | (1 << SHARPNESS_IDX),
+		| (1 << LIGHTFREQ_IDX) | (1 << SHARPNESS_IDX)
+		| (1 << GAIN_IDX) | (1 << EXPOSURE_IDX)
+		| (1 << AUTOGAIN_IDX) | (1 << BACKLIGHT_IDX),
 /* SENSOR_OV7670 6 */
 	(1 << BRIGHTNESS_IDX) | (1 << CONTRAST_IDX) | (1 << COLORS_IDX)
-		| (1 << SHARPNESS_IDX),
+		| (1 << SHARPNESS_IDX)
+		| (1 << GAIN_IDX) | (1 << EXPOSURE_IDX)
+		| (1 << AUTOGAIN_IDX) | (1 << BACKLIGHT_IDX),
 /* SENSOR_PO1200 7 */
 	(1 << BRIGHTNESS_IDX) | (1 << CONTRAST_IDX) | (1 << COLORS_IDX)
-		| (1 << LIGHTFREQ_IDX),
+		| (1 << LIGHTFREQ_IDX)
+		| (1 << GAIN_IDX) | (1 << EXPOSURE_IDX)
+		| (1 << AUTOGAIN_IDX) | (1 << BACKLIGHT_IDX),
 /* SENSOR_PO3130NC 8 */
 	(1 << BRIGHTNESS_IDX) | (1 << CONTRAST_IDX) | (1 << COLORS_IDX)
 		| (1 << HFLIP_IDX) | (1 << VFLIP_IDX) | (1 << LIGHTFREQ_IDX)
-		| (1 << SHARPNESS_IDX),
+		| (1 << SHARPNESS_IDX)
+		| (1 << GAIN_IDX) | (1 << EXPOSURE_IDX)
+		| (1 << AUTOGAIN_IDX) | (1 << BACKLIGHT_IDX),
 /* SENSOR_POxxxx 9 */
 	(1 << HFLIP_IDX) | (1 << VFLIP_IDX) | (1 << LIGHTFREQ_IDX),
 };
@@ -2825,7 +2915,9 @@ static const u8 poxxxx_init_common[][4] = {
 	{0x00, 0x1e, 0xc6, 0xaa},
 	{0x00, 0x00, 0x40, 0xdd},
 	{0x00, 0x1d, 0x05, 0xaa},
-
+	{}
+};
+static const u8 poxxxx_gamma[][4] = {
 	{0x00, 0xd6, 0x22, 0xaa},	/* gamma 0 */
 	{0x00, 0x73, 0x00, 0xaa},
 	{0x00, 0x74, 0x0a, 0xaa},
@@ -2867,19 +2959,9 @@ static const u8 poxxxx_init_common[][4] = {
 	{0x00, 0x7c, 0xba, 0xaa},
 	{0x00, 0x7d, 0xd4, 0xaa},
 	{0x00, 0x7e, 0xea, 0xaa},
-
-	{0x00, 0xaa, 0xff, 0xaa},	/* back light comp */
-	{0x00, 0xc4, 0x03, 0xaa},
-	{0x00, 0xc5, 0x19, 0xaa},
-	{0x00, 0xc6, 0x03, 0xaa},
-	{0x00, 0xc7, 0x91, 0xaa},
-	{0x00, 0xc8, 0x01, 0xaa},
-	{0x00, 0xc9, 0xdd, 0xaa},
-	{0x00, 0xca, 0x02, 0xaa},
-	{0x00, 0xcb, 0x37, 0xaa},
-
-/* read d1 */
-	{0x00, 0xd1, 0x3c, 0xaa},
+	{}
+};
+static const u8 poxxxx_init_start_3[][4] = {
 	{0x00, 0xb8, 0x28, 0xaa},
 	{0x00, 0xb9, 0x1e, 0xaa},
 	{0x00, 0xb6, 0x14, 0xaa},
@@ -2959,9 +3041,6 @@ static const u8 poxxxx_init_end_1[][4] = {
 	{0x00, 0xb3, 0x08, 0xaa},
 	{0x00, 0xb4, 0x0b, 0xaa},
 	{0x00, 0xb5, 0x0d, 0xaa},
-	{0x00, 0x59, 0x7e, 0xaa},	/* sharpness */
-	{0x00, 0x16, 0x00, 0xaa},	/* white balance */
-	{0x00, 0x18, 0x00, 0xaa},
 	{}
 };
 static const u8 poxxxx_init_end_2[][4] = {
@@ -3310,6 +3389,33 @@ static void usb_exchange(struct gspca_dev *gspca_dev,
 /* this function is called at probe time */
 static int sd_config(struct gspca_dev *gspca_dev,
 			const struct usb_device_id *id)
+{
+	struct sd *sd = (struct sd *) gspca_dev;
+
+	sd->bridge = id->driver_info >> 8;
+	sd->flags = id->driver_info & 0xff;
+
+	if (id->idVendor == 0x046d &&
+	    (id->idProduct == 0x0892 || id->idProduct == 0x0896))
+		sd->sensor = SENSOR_POxxxx;	/* no probe */
+
+	sd->brightness = BRIGHTNESS_DEF;
+	sd->contrast = CONTRAST_DEF;
+	sd->colors = COLOR_DEF;
+	sd->hflip = HFLIP_DEF;
+	sd->vflip = VFLIP_DEF;
+	sd->lightfreq = FREQ_DEF;
+	sd->sharpness = SHARPNESS_DEF;
+	sd->gain = GAIN_DEF;
+	sd->exposure = EXPOSURE_DEF;
+	sd->autogain = AUTOGAIN_DEF;
+	sd->backlight = BACKLIGHT_DEF;
+
+	return 0;
+}
+
+/* this function is called at probe and resume time */
+static int sd_init(struct gspca_dev *gspca_dev)
 {
 	struct sd *sd = (struct sd *) gspca_dev;
 	struct cam *cam;
@@ -3327,14 +3433,11 @@ static int sd_config(struct gspca_dev *gspca_dev,
 		128,		/* POxxxx 9 */
 	};
 
-	cam = &gspca_dev->cam;
-	sd->bridge = id->driver_info >> 8;
-	sd->flags = id->driver_info & 0xff;
-	if (id->idVendor == 0x046d &&
-	    (id->idProduct == 0x0892 || id->idProduct == 0x0896))
-		sensor = SENSOR_POxxxx;
-	else
+	if (sd->sensor != SENSOR_POxxxx)
 		sensor = vc032x_probe_sensor(gspca_dev);
+	else
+		sensor = sd->sensor;
+
 	switch (sensor) {
 	case -1:
 		PDEBUG(D_PROBE, "Unknown sensor...");
@@ -3373,6 +3476,7 @@ static int sd_config(struct gspca_dev *gspca_dev,
 	}
 	sd->sensor = sensor;
 
+	cam = &gspca_dev->cam;
 	if (sd->bridge == BRIDGE_VC0321) {
 		cam->cam_mode = vc0321_mode;
 		cam->nmodes = ARRAY_SIZE(vc0321_mode);
@@ -3401,28 +3505,11 @@ static int sd_config(struct gspca_dev *gspca_dev,
 		}
 	}
 	cam->npkt = npkt[sd->sensor];
-
-	sd->brightness = BRIGHTNESS_DEF;
-	sd->contrast = CONTRAST_DEF;
-	sd->colors = COLOR_DEF;
-	sd->hflip = HFLIP_DEF;
-	sd->vflip = VFLIP_DEF;
-	sd->lightfreq = FREQ_DEF;
-	sd->sharpness = SHARPNESS_DEF;
-
 	gspca_dev->ctrl_dis = ctrl_dis[sd->sensor];
 
 	if (sd->sensor == SENSOR_OV7670)
 		sd->flags |= FL_HFLIP | FL_VFLIP;
 
-	return 0;
-}
-
-/* this function is called at probe and resume time */
-static int sd_init(struct gspca_dev *gspca_dev)
-{
-	struct sd *sd = (struct sd *) gspca_dev;
-
 	if (sd->bridge == BRIDGE_VC0321) {
 		reg_r(gspca_dev, 0x8a, 0, 3);
 		reg_w(gspca_dev, 0x87, 0x00, 0x0f0f);
@@ -3433,8 +3520,8 @@ static int sd_init(struct gspca_dev *gspca_dev)
 			if (gspca_dev->usb_buf[0] != 0) {
 				reg_w(gspca_dev, 0xa0, 0x26, 0xb300);
 				reg_w(gspca_dev, 0xa0, 0x04, 0xb300);
-				reg_w(gspca_dev, 0xa0, 0x00, 0xb300);
 			}
+			reg_w(gspca_dev, 0xa0, 0x00, 0xb300);
 		}
 	}
 	return gspca_dev->usb_err;
@@ -3551,6 +3638,82 @@ static void setsharpness(struct gspca_dev *gspca_dev)
 		break;
 	}
 }
+static void setgain(struct gspca_dev *gspca_dev)
+{
+	struct sd *sd = (struct sd *) gspca_dev;
+
+	if (gspca_dev->ctrl_dis & (1 << GAIN_IDX))
+		return;
+	i2c_write(gspca_dev, 0x15, &sd->gain, 1);
+}
+
+static void setexposure(struct gspca_dev *gspca_dev)
+{
+	struct sd *sd = (struct sd *) gspca_dev;
+	u8 data;
+
+	if (gspca_dev->ctrl_dis & (1 << EXPOSURE_IDX))
+		return;
+	data = sd->exposure >> 8;
+	i2c_write(gspca_dev, 0x1a, &data, 1);
+	data = sd->exposure;
+	i2c_write(gspca_dev, 0x1b, &data, 1);
+}
+
+static void setautogain(struct gspca_dev *gspca_dev)
+{
+	struct sd *sd = (struct sd *) gspca_dev;
+	static const u8 data[2] = {0x28, 0x3c};
+
+	if (gspca_dev->ctrl_dis & (1 << AUTOGAIN_IDX))
+		return;
+	i2c_write(gspca_dev, 0xd1, &data[sd->autogain], 1);
+}
+
+static void setgamma(struct gspca_dev *gspca_dev)
+{
+/*fixme:to do */
+	usb_exchange(gspca_dev, poxxxx_gamma);
+}
+
+static void setbacklight(struct gspca_dev *gspca_dev)
+{
+	struct sd *sd = (struct sd *) gspca_dev;
+	u16 v;
+	u8 data;
+
+	data = (sd->backlight << 4) | 0x0f;
+	i2c_write(gspca_dev, 0xaa, &data, 1);
+	v = 613 + 12 * sd->backlight;
+	data = v >> 8;
+	i2c_write(gspca_dev, 0xc4, &data, 1);
+	data = v;
+	i2c_write(gspca_dev, 0xc5, &data, 1);
+	v = 1093 - 12 * sd->backlight;
+	data = v >> 8;
+	i2c_write(gspca_dev, 0xc6, &data, 1);
+	data = v;
+	i2c_write(gspca_dev, 0xc7, &data, 1);
+	v = 342 + 9 * sd->backlight;
+	data = v >> 8;
+	i2c_write(gspca_dev, 0xc8, &data, 1);
+	data = v;
+	i2c_write(gspca_dev, 0xc9, &data, 1);
+	v = 702 - 9 * sd->backlight;
+	data = v >> 8;
+	i2c_write(gspca_dev, 0xca, &data, 1);
+	data = v;
+	i2c_write(gspca_dev, 0xcb, &data, 1);
+}
+
+static void setwb(struct gspca_dev *gspca_dev)
+{
+/*fixme:to do - valid when reg d1 = 0x1c - (reg16 + reg15 = 0xa3)*/
+	static const u8 data[2] = {0x00, 0x00};
+
+	i2c_write(gspca_dev, 0x16, &data[0], 1);
+	i2c_write(gspca_dev, 0x18, &data[1], 1);
+}
 
 static int sd_start(struct gspca_dev *gspca_dev)
 {
@@ -3662,6 +3825,16 @@ static int sd_start(struct gspca_dev *gspca_dev)
 	default:
 /*	case SENSOR_POxxxx: */
 		usb_exchange(gspca_dev, poxxxx_init_common);
+		setgamma(gspca_dev);
+		setbacklight(gspca_dev);
+		setbrightness(gspca_dev);
+		setcontrast(gspca_dev);
+		setcolors(gspca_dev);
+		setsharpness(gspca_dev);
+		setautogain(gspca_dev);
+		setexposure(gspca_dev);
+		setgain(gspca_dev);
+		usb_exchange(gspca_dev, poxxxx_init_start_3);
 		if (mode)
 			init = poxxxx_initQVGA;
 		else
@@ -3693,7 +3866,6 @@ static int sd_start(struct gspca_dev *gspca_dev)
 			break;
 		}
 		msleep(100);
-		setsharpness(gspca_dev);
 		sethvflip(gspca_dev);
 		setlightfreq(gspca_dev);
 	}
@@ -3704,14 +3876,10 @@ static int sd_start(struct gspca_dev *gspca_dev)
 		reg_w(gspca_dev, 0xa0, 0x0000, 0xbfff);
 		break;
 	case SENSOR_POxxxx:
-		setcolors(gspca_dev);
-		setbrightness(gspca_dev);
-		setcontrast(gspca_dev);
-
-		/* led on */
-		msleep(80);
-		reg_w(gspca_dev, 0x89, 0xffff, 0xfdff);
 		usb_exchange(gspca_dev, poxxxx_init_end_2);
+		setwb(gspca_dev);
+		msleep(80);		/* led on */
+		reg_w(gspca_dev, 0x89, 0xffff, 0xfdff);
 		break;
 	}
 	return gspca_dev->usb_err;
@@ -3911,6 +4079,80 @@ static int sd_getsharpness(struct gspca_dev *gspca_dev, __s32 *val)
 	return 0;
 }
 
+static int sd_setgain(struct gspca_dev *gspca_dev, __s32 val)
+{
+	struct sd *sd = (struct sd *) gspca_dev;
+
+	sd->gain = val;
+	if (gspca_dev->streaming)
+		setgain(gspca_dev);
+	return gspca_dev->usb_err;
+}
+
+static int sd_getgain(struct gspca_dev *gspca_dev, __s32 *val)
+{
+	struct sd *sd = (struct sd *) gspca_dev;
+
+	*val = sd->gain;
+	return 0;
+}
+
+static int sd_setexposure(struct gspca_dev *gspca_dev, __s32 val)
+{
+	struct sd *sd = (struct sd *) gspca_dev;
+
+	sd->exposure = val;
+	if (gspca_dev->streaming)
+		setexposure(gspca_dev);
+	return gspca_dev->usb_err;
+}
+
+static int sd_getexposure(struct gspca_dev *gspca_dev, __s32 *val)
+{
+	struct sd *sd = (struct sd *) gspca_dev;
+
+	*val = sd->exposure;
+	return 0;
+}
+
+static int sd_setautogain(struct gspca_dev *gspca_dev, __s32 val)
+{
+	struct sd *sd = (struct sd *) gspca_dev;
+
+	sd->autogain = val;
+	if (gspca_dev->streaming)
+		setautogain(gspca_dev);
+
+	return gspca_dev->usb_err;
+}
+
+static int sd_getautogain(struct gspca_dev *gspca_dev, __s32 *val)
+{
+	struct sd *sd = (struct sd *) gspca_dev;
+
+	*val = sd->autogain;
+	return 0;
+}
+
+static int sd_setbacklight(struct gspca_dev *gspca_dev, __s32 val)
+{
+	struct sd *sd = (struct sd *) gspca_dev;
+
+	sd->backlight = val;
+	if (gspca_dev->streaming)
+		setbacklight(gspca_dev);
+
+	return gspca_dev->usb_err;
+}
+
+static int sd_getbacklight(struct gspca_dev *gspca_dev, __s32 *val)
+{
+	struct sd *sd = (struct sd *) gspca_dev;
+
+	*val = sd->backlight;
+	return 0;
+}
+
 static int sd_querymenu(struct gspca_dev *gspca_dev,
 			struct v4l2_querymenu *menu)
 {

drivers/media/video/gspca/zc3xx.c

@@ -21,7 +21,9 @@
 
 #define MODULE_NAME "zc3xx"
 
+#ifdef CONFIG_INPUT
 #include <linux/input.h>
+#endif
 #include "gspca.h"
 #include "jpeg.h"
 
@@ -50,33 +52,38 @@ struct sd {
 #define QUALITY_MAX 80
 #define QUALITY_DEF 70
 
+	u8 bridge;
 	u8 sensor;		/* Type of image sensor chip */
-/* !! values used in different tables */
-#define SENSOR_ADCM2700 0
-#define SENSOR_CS2102 1
-#define SENSOR_CS2102K 2
-#define SENSOR_GC0305 3
-#define SENSOR_HDCS2020b 4
-#define SENSOR_HV7131B 5
-#define SENSOR_HV7131C 6
-#define SENSOR_ICM105A 7
-#define SENSOR_MC501CB 8
-#define SENSOR_MI0360SOC 9
-#define SENSOR_OV7620 10
-/*#define SENSOR_OV7648 10 - same values */
-#define SENSOR_OV7630C 11
-#define SENSOR_PAS106 12
-#define SENSOR_PAS202B 13
-#define SENSOR_PB0330 14	/* (MI0360) */
-#define SENSOR_PO2030 15
-#define SENSOR_TAS5130CK 16
-#define SENSOR_TAS5130CXX 17
-#define SENSOR_TAS5130C_VF0250 18
-#define SENSOR_MAX 19
-	unsigned short chip_revision;
+	u16 chip_revision;
 
 	u8 jpeg_hdr[JPEG_HDR_SZ];
 };
+enum bridges {
+	BRIDGE_ZC301,
+	BRIDGE_ZC303,
+};
+enum sensors {
+	SENSOR_ADCM2700,
+	SENSOR_CS2102,
+	SENSOR_CS2102K,
+	SENSOR_GC0305,
+	SENSOR_HDCS2020b,
+	SENSOR_HV7131B,
+	SENSOR_HV7131R,
+	SENSOR_ICM105A,
+	SENSOR_MC501CB,
+	SENSOR_MT9V111_1,	/* (mi360soc) zc301 */
+	SENSOR_MT9V111_3,	/* (mi360soc) zc303 */
+	SENSOR_OV7620,		/* OV7648 - same values */
+	SENSOR_OV7630C,
+	SENSOR_PAS106,
+	SENSOR_PAS202B,
+	SENSOR_PB0330,
+	SENSOR_PO2030,
+	SENSOR_TAS5130C,
+	SENSOR_TAS5130C_VF0250,
+	SENSOR_MAX
+};
 
 /* V4L2 controls supported by the driver */
 static int sd_setbrightness(struct gspca_dev *gspca_dev, __s32 val);
@@ -2074,6 +2081,7 @@ static const struct usb_action hv7131b_NoFlikerScale[] = { /* 320x240 */
 	{}
 };
 
+/* from lPEPI264v.inf (hv7131b!) */
 static const struct usb_action hv7131r_InitialScale[] = {
 	{0xa0, 0x01, ZC3XX_R000_SYSTEMCONTROL},
 	{0xa0, 0x10, ZC3XX_R002_CLOCKSELECT},
@@ -2081,8 +2089,8 @@ static const struct usb_action hv7131r_InitialScale[] = {
 	{0xa0, 0x01, ZC3XX_R001_SYSTEMOPERATING},
 	{0xa0, 0x77, ZC3XX_R101_SENSORCORRECTION},
 	{0xa0, 0x03, ZC3XX_R008_CLOCKSETTING},
-	{0xa0, 0x05, ZC3XX_R012_VIDEOCONTROLFUNC},
 	{0xa0, 0x07, ZC3XX_R012_VIDEOCONTROLFUNC},
+	{0xa0, 0x01, ZC3XX_R012_VIDEOCONTROLFUNC},
 	{0xa0, 0x02, ZC3XX_R003_FRAMEWIDTHHIGH},
 	{0xa0, 0x80, ZC3XX_R004_FRAMEWIDTHLOW},
 	{0xa0, 0x01, ZC3XX_R005_FRAMEHEIGHTHIGH},
@@ -2095,6 +2103,8 @@ static const struct usb_action hv7131r_InitialScale[] = {
 	{0xa0, 0x88, ZC3XX_R09E_WINWIDTHLOW},
 	{0xa0, 0x00, ZC3XX_R11A_FIRSTYLOW},
 	{0xa0, 0x00, ZC3XX_R11C_FIRSTXLOW},
+	{0xa0, 0x07, ZC3XX_R012_VIDEOCONTROLFUNC},
+	{0xdd, 0x00, 0x0200},
 	{0xa0, 0x05, ZC3XX_R012_VIDEOCONTROLFUNC},
 	{0xaa, 0x01, 0x000c},
 	{0xaa, 0x11, 0x0000},
@@ -2103,10 +2113,10 @@ static const struct usb_action hv7131r_InitialScale[] = {
 	{0xaa, 0x15, 0x00e8},
 	{0xaa, 0x16, 0x0002},
 	{0xaa, 0x17, 0x0088},
-
+	{0xaa, 0x30, 0x000b},
 	{0xa0, 0x00, ZC3XX_R019_AUTOADJUSTFPS},
 	{0xa0, 0x0d, ZC3XX_R100_OPERATIONMODE},
-	{0xa0, 0x89, ZC3XX_R18D_YTARGET},
+	{0xa0, 0x78, ZC3XX_R18D_YTARGET},
 	{0xa0, 0x50, ZC3XX_R1A8_DIGITALGAIN},
 	{0xa0, 0x00, 0x01ad},
 	{0xa0, 0xc0, 0x019b},
@@ -2116,96 +2126,44 @@ static const struct usb_action hv7131r_InitialScale[] = {
 	{0xa0, 0x13, ZC3XX_R1CB_SHARPNESS05},
 	{0xa0, 0x08, ZC3XX_R250_DEADPIXELSMODE},
 	{0xa0, 0x08, ZC3XX_R301_EEPROMACCESS},
-	{0xa1, 0x01, 0x0002},
-	{0xa0, 0x00, ZC3XX_R092_I2CADDRESSSELECT},
-	{0xa0, 0x02, ZC3XX_R090_I2CCOMMAND},
-	{0xa1, 0x01, 0x0091},
-	{0xa1, 0x01, 0x0095},
-	{0xa1, 0x01, 0x0096},
-
-	{0xa1, 0x01, 0x0008},
-	{0xa0, 0x03, ZC3XX_R008_CLOCKSETTING},	/* clock ? */
-	{0xa0, 0x08, ZC3XX_R1C6_SHARPNESS00},	/* sharpness+ */
-	{0xa1, 0x01, 0x01c8},
-	{0xa1, 0x01, 0x01c9},
-	{0xa1, 0x01, 0x01ca},
-	{0xa0, 0x0f, ZC3XX_R1CB_SHARPNESS05},	/* sharpness- */
-
-	{0xa0, 0x60, ZC3XX_R10A_RGB00},	/* matrix */
-	{0xa0, 0xf0, ZC3XX_R10B_RGB01},
-	{0xa0, 0xf0, ZC3XX_R10C_RGB02},
-	{0xa0, 0xf0, ZC3XX_R10D_RGB10},
-	{0xa0, 0x60, ZC3XX_R10E_RGB11},
-	{0xa0, 0xf0, ZC3XX_R10F_RGB12},
-	{0xa0, 0xf0, ZC3XX_R110_RGB20},
-	{0xa0, 0xf0, ZC3XX_R111_RGB21},
-	{0xa0, 0x60, ZC3XX_R112_RGB22},
-	{0xa1, 0x01, 0x0180},
-	{0xa0, 0x10, ZC3XX_R180_AUTOCORRECTENABLE},
-	{0xa0, 0x00, ZC3XX_R019_AUTOADJUSTFPS},
-	{0xaa, 0x25, 0x0007},
-	{0xaa, 0x26, 0x0053},
-	{0xaa, 0x27, 0x0000},
-
-	{0xa0, 0x10, ZC3XX_R190_EXPOSURELIMITHIGH},	/* 2f */
-	{0xa0, 0x04, ZC3XX_R191_EXPOSURELIMITMID},	/* 9b */
-	{0xa0, 0x60, ZC3XX_R192_EXPOSURELIMITLOW},	/* 80 */
-	{0xa0, 0x01, ZC3XX_R195_ANTIFLICKERHIGH},
-	{0xa0, 0xd4, ZC3XX_R196_ANTIFLICKERMID},
-	{0xa0, 0xc0, ZC3XX_R197_ANTIFLICKERLOW},
-	{0xa0, 0x10, ZC3XX_R18C_AEFREEZE},
-	{0xa0, 0x20, ZC3XX_R18F_AEUNFREEZE},
-	{0xa0, 0x60, ZC3XX_R1A8_DIGITALGAIN},
-	{0xa0, 0x10, ZC3XX_R1A9_DIGITALLIMITDIFF},
-	{0xa0, 0x13, ZC3XX_R1AA_DIGITALGAINSTEP},
-	{0xa1, 0x01, 0x001d},
-	{0xa1, 0x01, 0x001e},
-	{0xa1, 0x01, 0x001f},
-	{0xa1, 0x01, 0x0020},
-	{0xa0, 0x40, ZC3XX_R180_AUTOCORRECTENABLE},
-	{0xa1, 0x01, 0x0180},
-	{0xa0, 0x42, ZC3XX_R180_AUTOCORRECTENABLE},
 	{}
 };
-
 static const struct usb_action hv7131r_Initial[] = {
 	{0xa0, 0x01, ZC3XX_R000_SYSTEMCONTROL},
-
-	{0xa0, 0x00, ZC3XX_R002_CLOCKSELECT},	/* diff */
+	{0xa0, 0x00, ZC3XX_R002_CLOCKSELECT},
 	{0xa0, 0x01, ZC3XX_R010_CMOSSENSORSELECT},
 	{0xa0, 0x01, ZC3XX_R001_SYSTEMOPERATING},
 	{0xa0, 0x77, ZC3XX_R101_SENSORCORRECTION},
 	{0xa0, 0x03, ZC3XX_R008_CLOCKSETTING},
-
-	{0xa0, 0x05, ZC3XX_R012_VIDEOCONTROLFUNC},
 	{0xa0, 0x07, ZC3XX_R012_VIDEOCONTROLFUNC},
-
+	{0xa0, 0x01, ZC3XX_R012_VIDEOCONTROLFUNC},
 	{0xa0, 0x02, ZC3XX_R003_FRAMEWIDTHHIGH},
 	{0xa0, 0x80, ZC3XX_R004_FRAMEWIDTHLOW},
 	{0xa0, 0x01, ZC3XX_R005_FRAMEHEIGHTHIGH},
-	{0xa0, 0xe0, ZC3XX_R006_FRAMEHEIGHTLOW},	/* 1e0 */
+	{0xa0, 0xe0, ZC3XX_R006_FRAMEHEIGHTLOW},
 
 	{0xa0, 0x00, ZC3XX_R098_WINYSTARTLOW},
 	{0xa0, 0x00, ZC3XX_R09A_WINXSTARTLOW},
 	{0xa0, 0x01, ZC3XX_R09B_WINHEIGHTHIGH},
-	{0xa0, 0xe8, ZC3XX_R09C_WINHEIGHTLOW},
+	{0xa0, 0xe6, ZC3XX_R09C_WINHEIGHTLOW},
 	{0xa0, 0x02, ZC3XX_R09D_WINWIDTHHIGH},
-	{0xa0, 0x88, ZC3XX_R09E_WINWIDTHLOW},
+	{0xa0, 0x86, ZC3XX_R09E_WINWIDTHLOW},
 	{0xa0, 0x00, ZC3XX_R11A_FIRSTYLOW},
 	{0xa0, 0x00, ZC3XX_R11C_FIRSTXLOW},
+	{0xa0, 0x07, ZC3XX_R012_VIDEOCONTROLFUNC},
+	{0xdd, 0x00, 0x0200},
 	{0xa0, 0x05, ZC3XX_R012_VIDEOCONTROLFUNC},
 	{0xaa, 0x01, 0x000c},
 	{0xaa, 0x11, 0x0000},
 	{0xaa, 0x13, 0x0000},
 	{0xaa, 0x14, 0x0001},
-	{0xaa, 0x15, 0x00e8},
+	{0xaa, 0x15, 0x00e6},
 	{0xaa, 0x16, 0x0002},
-	{0xaa, 0x17, 0x0088},
-
-	{0xa0, 0x00, ZC3XX_R019_AUTOADJUSTFPS},	/* 00 */
-
+	{0xaa, 0x17, 0x0086},
+	{0xaa, 0x30, 0x000b},
+	{0xa0, 0x00, ZC3XX_R019_AUTOADJUSTFPS},
 	{0xa0, 0x0d, ZC3XX_R100_OPERATIONMODE},
-	{0xa0, 0x89, ZC3XX_R18D_YTARGET},
+	{0xa0, 0x78, ZC3XX_R18D_YTARGET},
 	{0xa0, 0x50, ZC3XX_R1A8_DIGITALGAIN},
 	{0xa0, 0x00, 0x01ad},
 	{0xa0, 0xc0, 0x019b},
@@ -2215,58 +2173,114 @@ static const struct usb_action hv7131r_Initial[] = {
 	{0xa0, 0x13, ZC3XX_R1CB_SHARPNESS05},
 	{0xa0, 0x08, ZC3XX_R250_DEADPIXELSMODE},
 	{0xa0, 0x08, ZC3XX_R301_EEPROMACCESS},
-	{0xa1, 0x01, 0x0002},
-	{0xa0, 0x00, ZC3XX_R092_I2CADDRESSSELECT},
-						/* read the i2c chips ident */
-	{0xa0, 0x02, ZC3XX_R090_I2CCOMMAND},
-	{0xa1, 0x01, 0x0091},
-	{0xa1, 0x01, 0x0095},
-	{0xa1, 0x01, 0x0096},
-
-	{0xa1, 0x01, 0x0008},
-	{0xa0, 0x03, ZC3XX_R008_CLOCKSETTING},	/* clock ? */
-	{0xa0, 0x08, ZC3XX_R1C6_SHARPNESS00},	/* sharpness+ */
-	{0xa1, 0x01, 0x01c8},
-	{0xa1, 0x01, 0x01c9},
-	{0xa1, 0x01, 0x01ca},
-	{0xa0, 0x0f, ZC3XX_R1CB_SHARPNESS05},	/* sharpness- */
-
-	{0xa0, 0x60, ZC3XX_R10A_RGB00},	/* matrix */
-	{0xa0, 0xf0, ZC3XX_R10B_RGB01},
-	{0xa0, 0xf0, ZC3XX_R10C_RGB02},
-	{0xa0, 0xf0, ZC3XX_R10D_RGB10},
-	{0xa0, 0x60, ZC3XX_R10E_RGB11},
-	{0xa0, 0xf0, ZC3XX_R10F_RGB12},
-	{0xa0, 0xf0, ZC3XX_R110_RGB20},
-	{0xa0, 0xf0, ZC3XX_R111_RGB21},
-	{0xa0, 0x60, ZC3XX_R112_RGB22},
-	{0xa1, 0x01, 0x0180},
-	{0xa0, 0x10, ZC3XX_R180_AUTOCORRECTENABLE},
+	{}
+};
+static const struct usb_action hv7131r_50HZ[] = {
 	{0xa0, 0x00, ZC3XX_R019_AUTOADJUSTFPS},
-	{0xaa, 0x25, 0x0007},
-	{0xaa, 0x26, 0x0053},
-	{0xaa, 0x27, 0x0000},
-
-	{0xa0, 0x10, ZC3XX_R190_EXPOSURELIMITHIGH},	/* 2f */
-	{0xa0, 0x04, ZC3XX_R191_EXPOSURELIMITMID},	/* 9b */
-	{0xa0, 0x60, ZC3XX_R192_EXPOSURELIMITLOW},	/* 80 */
-
+	{0xa0, 0x06, ZC3XX_R190_EXPOSURELIMITHIGH},
+	{0xa0, 0x68, ZC3XX_R191_EXPOSURELIMITMID},
+	{0xa0, 0xa0, ZC3XX_R192_EXPOSURELIMITLOW},
+	{0xa0, 0x00, ZC3XX_R195_ANTIFLICKERHIGH},
+	{0xa0, 0xea, ZC3XX_R196_ANTIFLICKERMID},
+	{0xa0, 0x60, ZC3XX_R197_ANTIFLICKERLOW},
+	{0xa0, 0x18, ZC3XX_R18C_AEFREEZE},
+	{0xa0, 0x20, ZC3XX_R18F_AEUNFREEZE},
+	{0xa0, 0x10, ZC3XX_R1A9_DIGITALLIMITDIFF},
+	{0xa0, 0x66, ZC3XX_R1AA_DIGITALGAINSTEP},
+	{0xa0, 0x00, ZC3XX_R01D_HSYNC_0},
+	{0xa0, 0xd0, ZC3XX_R01E_HSYNC_1},
+	{0xa0, 0x00, ZC3XX_R01F_HSYNC_2},
+	{0xa0, 0x08, ZC3XX_R020_HSYNC_3},
+	{}
+};
+static const struct usb_action hv7131r_50HZScale[] = {
+	{0xa0, 0x00, ZC3XX_R019_AUTOADJUSTFPS},
+	{0xa0, 0x0c, ZC3XX_R190_EXPOSURELIMITHIGH},
+	{0xa0, 0xd1, ZC3XX_R191_EXPOSURELIMITMID},
+	{0xa0, 0x40, ZC3XX_R192_EXPOSURELIMITLOW},
 	{0xa0, 0x01, ZC3XX_R195_ANTIFLICKERHIGH},
 	{0xa0, 0xd4, ZC3XX_R196_ANTIFLICKERMID},
 	{0xa0, 0xc0, ZC3XX_R197_ANTIFLICKERLOW},
-
-	{0xa0, 0x10, ZC3XX_R18C_AEFREEZE},
+	{0xa0, 0x18, ZC3XX_R18C_AEFREEZE},
 	{0xa0, 0x20, ZC3XX_R18F_AEUNFREEZE},
-	{0xa0, 0x60, ZC3XX_R1A8_DIGITALGAIN},
 	{0xa0, 0x10, ZC3XX_R1A9_DIGITALLIMITDIFF},
-	{0xa0, 0x13, ZC3XX_R1AA_DIGITALGAINSTEP},
-	{0xa1, 0x01, 0x001d},
-	{0xa1, 0x01, 0x001e},
-	{0xa1, 0x01, 0x001f},
-	{0xa1, 0x01, 0x0020},
-	{0xa0, 0x40, ZC3XX_R180_AUTOCORRECTENABLE},
-	{0xa1, 0x01, 0x0180},
-	{0xa0, 0x42, ZC3XX_R180_AUTOCORRECTENABLE},
+	{0xa0, 0x66, ZC3XX_R1AA_DIGITALGAINSTEP},
+	{0xa0, 0x00, ZC3XX_R01D_HSYNC_0},
+	{0xa0, 0xd0, ZC3XX_R01E_HSYNC_1},
+	{0xa0, 0x00, ZC3XX_R01F_HSYNC_2},
+	{0xa0, 0x08, ZC3XX_R020_HSYNC_3},
+	{}
+};
+static const struct usb_action hv7131r_60HZ[] = {
+	{0xa0, 0x00, ZC3XX_R019_AUTOADJUSTFPS},
+	{0xa0, 0x06, ZC3XX_R190_EXPOSURELIMITHIGH},
+	{0xa0, 0x1a, ZC3XX_R191_EXPOSURELIMITMID},
+	{0xa0, 0x80, ZC3XX_R192_EXPOSURELIMITLOW},
+	{0xa0, 0x00, ZC3XX_R195_ANTIFLICKERHIGH},
+	{0xa0, 0xc3, ZC3XX_R196_ANTIFLICKERMID},
+	{0xa0, 0x50, ZC3XX_R197_ANTIFLICKERLOW},
+	{0xa0, 0x18, ZC3XX_R18C_AEFREEZE},
+	{0xa0, 0x20, ZC3XX_R18F_AEUNFREEZE},
+	{0xa0, 0x10, ZC3XX_R1A9_DIGITALLIMITDIFF},
+	{0xa0, 0x66, ZC3XX_R1AA_DIGITALGAINSTEP},
+	{0xa0, 0x00, ZC3XX_R01D_HSYNC_0},
+	{0xa0, 0xd0, ZC3XX_R01E_HSYNC_1},
+	{0xa0, 0x00, ZC3XX_R01F_HSYNC_2},
+	{0xa0, 0x08, ZC3XX_R020_HSYNC_3},
+	{}
+};
+static const struct usb_action hv7131r_60HZScale[] = {
+	{0xa0, 0x00, ZC3XX_R019_AUTOADJUSTFPS},
+	{0xa0, 0x0c, ZC3XX_R190_EXPOSURELIMITHIGH},
+	{0xa0, 0x35, ZC3XX_R191_EXPOSURELIMITMID},
+	{0xa0, 0x00, ZC3XX_R192_EXPOSURELIMITLOW},
+	{0xa0, 0x01, ZC3XX_R195_ANTIFLICKERHIGH},
+	{0xa0, 0x86, ZC3XX_R196_ANTIFLICKERMID},
+	{0xa0, 0xa0, ZC3XX_R197_ANTIFLICKERLOW},
+	{0xa0, 0x18, ZC3XX_R18C_AEFREEZE},
+	{0xa0, 0x20, ZC3XX_R18F_AEUNFREEZE},
+	{0xa0, 0x10, ZC3XX_R1A9_DIGITALLIMITDIFF},
+	{0xa0, 0x66, ZC3XX_R1AA_DIGITALGAINSTEP},
+	{0xa0, 0x00, ZC3XX_R01D_HSYNC_0},
+	{0xa0, 0xd0, ZC3XX_R01E_HSYNC_1},
+	{0xa0, 0x00, ZC3XX_R01F_HSYNC_2},
+	{0xa0, 0x08, ZC3XX_R020_HSYNC_3},
+	{}
+};
+static const struct usb_action hv7131r_NoFliker[] = {
+	{0xa0, 0x00, ZC3XX_R019_AUTOADJUSTFPS},
+	{0xa0, 0x2f, ZC3XX_R190_EXPOSURELIMITHIGH},
+	{0xa0, 0xf8, ZC3XX_R191_EXPOSURELIMITMID},
+	{0xa0, 0x00, ZC3XX_R192_EXPOSURELIMITLOW},
+	{0xa0, 0x00, ZC3XX_R195_ANTIFLICKERHIGH},
+	{0xa0, 0x02, ZC3XX_R196_ANTIFLICKERMID},
+	{0xa0, 0x58, ZC3XX_R197_ANTIFLICKERLOW},
+	{0xa0, 0x0c, ZC3XX_R18C_AEFREEZE},
+	{0xa0, 0x18, ZC3XX_R18F_AEUNFREEZE},
+	{0xa0, 0x00, ZC3XX_R1A9_DIGITALLIMITDIFF},
+	{0xa0, 0x00, ZC3XX_R1AA_DIGITALGAINSTEP},
+	{0xa0, 0x00, ZC3XX_R01D_HSYNC_0},
+	{0xa0, 0xd0, ZC3XX_R01E_HSYNC_1},
+	{0xa0, 0x00, ZC3XX_R01F_HSYNC_2},
+	{0xa0, 0x08, ZC3XX_R020_HSYNC_3},
+	{}
+};
+static const struct usb_action hv7131r_NoFlikerScale[] = {
+	{0xa0, 0x00, ZC3XX_R019_AUTOADJUSTFPS},
+	{0xa0, 0x2f, ZC3XX_R190_EXPOSURELIMITHIGH},
+	{0xa0, 0xf8, ZC3XX_R191_EXPOSURELIMITMID},
+	{0xa0, 0x00, ZC3XX_R192_EXPOSURELIMITLOW},
+	{0xa0, 0x00, ZC3XX_R195_ANTIFLICKERHIGH},
+	{0xa0, 0x04, ZC3XX_R196_ANTIFLICKERMID},
+	{0xa0, 0xb0, ZC3XX_R197_ANTIFLICKERLOW},
+	{0xa0, 0x0c, ZC3XX_R18C_AEFREEZE},
+	{0xa0, 0x18, ZC3XX_R18F_AEUNFREEZE},
+	{0xa0, 0x00, ZC3XX_R1A9_DIGITALLIMITDIFF},
+	{0xa0, 0x00, ZC3XX_R1AA_DIGITALGAINSTEP},
+	{0xa0, 0x00, ZC3XX_R01D_HSYNC_0},
+	{0xa0, 0xd0, ZC3XX_R01E_HSYNC_1},
+	{0xa0, 0x00, ZC3XX_R01F_HSYNC_2},
+	{0xa0, 0x08, ZC3XX_R020_HSYNC_3},
 	{}
 };
 
@@ -3350,7 +3364,7 @@ static const struct usb_action ov7620_NoFliker[] = {
 	{0xa0, 0x00, ZC3XX_R196_ANTIFLICKERMID}, /* 01,96,00,cc */
 	{0xa0, 0x01, ZC3XX_R197_ANTIFLICKERLOW}, /* 01,97,01,cc */
 /*	{0xa0, 0x44, ZC3XX_R002_CLOCKSELECT},	 * 00,02,44,cc
-						 - if mode1 (320x240) */
+						 * if mode1 (320x240) */
 /* ?? was
 	{0xa0, 0x00, 0x0039},  * 00,00,00,dd *
 	{0xa1, 0x01, 0x0037},		*/
@@ -3439,7 +3453,6 @@ static const struct usb_action ov7630c_InitialScale[] = {
 	{0xa0, 0xf8, ZC3XX_R110_RGB20},
 	{0xa0, 0xf8, ZC3XX_R111_RGB21},
 	{0xa0, 0x50, ZC3XX_R112_RGB22},
-/* 0x03, */
 	{0xa1, 0x01, 0x0008},
 	{0xa0, 0x03, ZC3XX_R008_CLOCKSETTING},	/* clock ? */
 	{0xa0, 0x08, ZC3XX_R1C6_SHARPNESS00},	/* sharpness+ */
@@ -3719,7 +3732,7 @@ static const struct usb_action pas106b_InitialScale[] = {	/* 176x144 */
 	{0xaa, 0x0e, 0x0002},
 	{0xaa, 0x14, 0x0081},
 
-/* Other registors */
+/* Other registers */
 	{0xa0, 0x37, ZC3XX_R101_SENSORCORRECTION},
 /* Frame retreiving */
 	{0xa0, 0x00, ZC3XX_R019_AUTOADJUSTFPS},
@@ -3730,7 +3743,7 @@ static const struct usb_action pas106b_InitialScale[] = {	/* 176x144 */
 /* Sharpness */
 	{0xa0, 0x03, ZC3XX_R1C5_SHARPNESSMODE},
 	{0xa0, 0x13, ZC3XX_R1CB_SHARPNESS05},
-/* Other registors */
+/* Other registers */
 	{0xa0, 0x0d, ZC3XX_R100_OPERATIONMODE},
 /* Auto exposure and white balance */
 	{0xa0, 0x06, ZC3XX_R189_AWBSTATUS},
@@ -3837,7 +3850,7 @@ static const struct usb_action pas106b_Initial[] = {	/* 352x288 */
 	{0xaa, 0x0e, 0x0002},
 	{0xaa, 0x14, 0x0081},
 
-/* Other registors */
+/* Other registers */
 	{0xa0, 0x37, ZC3XX_R101_SENSORCORRECTION},
 /* Frame retreiving */
 	{0xa0, 0x00, ZC3XX_R019_AUTOADJUSTFPS},
@@ -3848,7 +3861,7 @@ static const struct usb_action pas106b_Initial[] = {	/* 352x288 */
 /* Sharpness */
 	{0xa0, 0x03, ZC3XX_R1C5_SHARPNESSMODE},
 	{0xa0, 0x13, ZC3XX_R1CB_SHARPNESS05},
-/* Other registors */
+/* Other registers */
 	{0xa0, 0x0d, ZC3XX_R100_OPERATIONMODE},
 /* Auto exposure and white balance */
 	{0xa0, 0x06, ZC3XX_R189_AWBSTATUS},
@@ -4241,8 +4254,8 @@ static const struct usb_action pas202b_NoFlikerScale[] = {
 	{}
 };
 
-/* mi0360soc and pb0330 from vm30x.inf for 0ac8:301b and 0ac8:303b 07/02/13 */
-static const struct usb_action mi0360soc_Initial[] = {	/* 640x480 */
+/* mt9v111 (mi0360soc) and pb0330 from vm30x.inf 0ac8:301b 07/02/13 */
+static const struct usb_action mt9v111_1_Initial[] = {	/* 640x480 */
 	{0xa0, 0x01, ZC3XX_R000_SYSTEMCONTROL},
 	{0xa0, 0x03, ZC3XX_R008_CLOCKSETTING},
 	{0xa0, 0x0a, ZC3XX_R010_CMOSSENSORSELECT},
@@ -4253,14 +4266,14 @@ static const struct usb_action mi0360soc_Initial[] = {	/* 640x480 */
 	{0xa0, 0xe0, ZC3XX_R006_FRAMEHEIGHTLOW},
 	{0xa0, 0xdc, ZC3XX_R08B_I2CDEVICEADDR},
 	{0xa0, 0x01, ZC3XX_R001_SYSTEMOPERATING},
-	{0xa0, 0x07, ZC3XX_R012_VIDEOCONTROLFUNC},	/*jfm: was 03*/
-/*	{0xa0, 0x01, ZC3XX_R012_VIDEOCONTROLFUNC}, */
+	{0xa0, 0x07, ZC3XX_R012_VIDEOCONTROLFUNC},
 	{0xa0, 0x00, ZC3XX_R098_WINYSTARTLOW},
 	{0xa0, 0x00, ZC3XX_R09A_WINXSTARTLOW},
 	{0xa0, 0x00, ZC3XX_R11A_FIRSTYLOW},
 	{0xa0, 0x00, ZC3XX_R11C_FIRSTXLOW},
 	{0xa0, 0xdc, ZC3XX_R08B_I2CDEVICEADDR},
 	{0xdd, 0x00, 0x0200},
+	{0xa0, 0x05, ZC3XX_R012_VIDEOCONTROLFUNC},
 	{0xaa, 0x01, 0x0001},
 	{0xaa, 0x06, 0x0000},
 	{0xaa, 0x08, 0x0483},
@@ -4270,18 +4283,18 @@ static const struct usb_action mi0360soc_Initial[] = {	/* 640x480 */
 	{0xaa, 0x03, 0x01e5},			/*jfm: was 01e7*/
 	{0xaa, 0x04, 0x0285},			/*jfm: was 0287*/
 	{0xaa, 0x07, 0x3002},
-	{0xaa, 0x20, 0x5100},			/*jfm: was 1100*/
-	{0xaa, 0x35, 0x507f},			/*jfm: was 0050*/
+	{0xaa, 0x20, 0x5100},
+	{0xaa, 0x35, 0x507f},
 	{0xaa, 0x30, 0x0005},
 	{0xaa, 0x31, 0x0000},
 	{0xaa, 0x58, 0x0078},
 	{0xaa, 0x62, 0x0411},
-	{0xaa, 0x2b, 0x0028},
+	{0xaa, 0x2b, 0x007f},
 	{0xaa, 0x2c, 0x007f},			/*jfm: was 0030*/
 	{0xaa, 0x2d, 0x007f},			/*jfm: was 0030*/
 	{0xaa, 0x2e, 0x007f},			/*jfm: was 0030*/
 	{0xa0, 0x10, ZC3XX_R087_EXPTIMEMID},
-	{0xa0, 0xb7, ZC3XX_R101_SENSORCORRECTION}, /*jfm: was 37*/
+	{0xa0, 0xb7, ZC3XX_R101_SENSORCORRECTION},
 	{0xa0, 0x05, ZC3XX_R012_VIDEOCONTROLFUNC},
 	{0xa0, 0x0d, ZC3XX_R100_OPERATIONMODE},
 	{0xa0, 0x06, ZC3XX_R189_AWBSTATUS},
@@ -4291,12 +4304,12 @@ static const struct usb_action mi0360soc_Initial[] = {	/* 640x480 */
 	{0xa0, 0x08, ZC3XX_R250_DEADPIXELSMODE},
 	{0xa0, 0x08, ZC3XX_R301_EEPROMACCESS},
 	{0xa0, 0x60, ZC3XX_R1A8_DIGITALGAIN},
-	{0xa0, 0x6c, ZC3XX_R18D_YTARGET},	/* jfm: was 78 */
+	{0xa0, 0x6c, ZC3XX_R18D_YTARGET},
 	{0xa0, 0x61, ZC3XX_R116_RGAIN},
 	{0xa0, 0x65, ZC3XX_R118_BGAIN},
 	{}
 };
-static const struct usb_action mi0360soc_InitialScale[] = {	/* 320x240 */
+static const struct usb_action mt9v111_1_InitialScale[] = {	/* 320x240 */
 	{0xa0, 0x01, ZC3XX_R000_SYSTEMCONTROL},
 	{0xa0, 0x03, ZC3XX_R008_CLOCKSETTING},
 	{0xa0, 0x0a, ZC3XX_R010_CMOSSENSORSELECT},
@@ -4307,14 +4320,14 @@ static const struct usb_action mi0360soc_InitialScale[] = {	/* 320x240 */
 	{0xa0, 0xe0, ZC3XX_R006_FRAMEHEIGHTLOW},
 	{0xa0, 0xdc, ZC3XX_R08B_I2CDEVICEADDR},
 	{0xa0, 0x01, ZC3XX_R001_SYSTEMOPERATING},
-	{0xa0, 0x07, ZC3XX_R012_VIDEOCONTROLFUNC},	/*jfm: was 03*/
-/*	{0xa0, 0x01, ZC3XX_R012_VIDEOCONTROLFUNC}, */
+	{0xa0, 0x07, ZC3XX_R012_VIDEOCONTROLFUNC},
 	{0xa0, 0x00, ZC3XX_R098_WINYSTARTLOW},
 	{0xa0, 0x00, ZC3XX_R09A_WINXSTARTLOW},
 	{0xa0, 0x00, ZC3XX_R11A_FIRSTYLOW},
 	{0xa0, 0x00, ZC3XX_R11C_FIRSTXLOW},
 	{0xa0, 0xdc, ZC3XX_R08B_I2CDEVICEADDR},
 	{0xdd, 0x00, 0x0200},
+	{0xa0, 0x05, ZC3XX_R012_VIDEOCONTROLFUNC},
 	{0xaa, 0x01, 0x0001},
 	{0xaa, 0x06, 0x0000},
 	{0xaa, 0x08, 0x0483},
@@ -4324,7 +4337,7 @@ static const struct usb_action mi0360soc_InitialScale[] = {	/* 320x240 */
 	{0xaa, 0x03, 0x01e7},
 	{0xaa, 0x04, 0x0287},
 	{0xaa, 0x07, 0x3002},
-	{0xaa, 0x20, 0x5100},			/*jfm: was 1100*/
+	{0xaa, 0x20, 0x5100},
 	{0xaa, 0x35, 0x007f},			/*jfm: was 0050*/
 	{0xaa, 0x30, 0x0005},
 	{0xaa, 0x31, 0x0000},
@@ -4335,7 +4348,7 @@ static const struct usb_action mi0360soc_InitialScale[] = {	/* 320x240 */
 	{0xaa, 0x2d, 0x007f},			/*jfm: was 30*/
 	{0xaa, 0x2e, 0x007f},			/*jfm: was 28*/
 	{0xa0, 0x10, ZC3XX_R087_EXPTIMEMID},
-	{0xa0, 0xb7, ZC3XX_R101_SENSORCORRECTION},	/*jfm: was 37*/
+	{0xa0, 0xb7, ZC3XX_R101_SENSORCORRECTION},
 	{0xa0, 0x05, ZC3XX_R012_VIDEOCONTROLFUNC},
 	{0xa0, 0x0d, ZC3XX_R100_OPERATIONMODE},
 	{0xa0, 0x06, ZC3XX_R189_AWBSTATUS},
@@ -4345,12 +4358,12 @@ static const struct usb_action mi0360soc_InitialScale[] = {	/* 320x240 */
 	{0xa0, 0x08, ZC3XX_R250_DEADPIXELSMODE},
 	{0xa0, 0x08, ZC3XX_R301_EEPROMACCESS},
 	{0xa0, 0x60, ZC3XX_R1A8_DIGITALGAIN},
-	{0xa0, 0x6c, ZC3XX_R18D_YTARGET},	/*jfm: was 78*/
+	{0xa0, 0x6c, ZC3XX_R18D_YTARGET},
 	{0xa0, 0x61, ZC3XX_R116_RGAIN},
 	{0xa0, 0x65, ZC3XX_R118_BGAIN},
 	{}
 };
-static const struct usb_action mi360soc_AE50HZ[] = {
+static const struct usb_action mt9v111_1_AE50HZ[] = {
 	{0xa0, 0x00, ZC3XX_R180_AUTOCORRECTENABLE},
 	{0xa0, 0x00, ZC3XX_R019_AUTOADJUSTFPS},
 	{0xbb, 0x00, 0x0562},
@@ -4373,7 +4386,7 @@ static const struct usb_action mi360soc_AE50HZ[] = {
 	{0xa0, 0x42, ZC3XX_R180_AUTOCORRECTENABLE},
 	{}
 };
-static const struct usb_action mi360soc_AE50HZScale[] = {
+static const struct usb_action mt9v111_1_AE50HZScale[] = {
 	{0xa0, 0x00, ZC3XX_R180_AUTOCORRECTENABLE},
 	{0xa0, 0x00, ZC3XX_R019_AUTOADJUSTFPS},
 	{0xbb, 0x00, 0x0509},
@@ -4395,11 +4408,11 @@ static const struct usb_action mi360soc_AE50HZScale[] = {
 	{0xa0, 0x42, ZC3XX_R180_AUTOCORRECTENABLE},
 	{}
 };
-static const struct usb_action mi360soc_AE60HZ[] = {
+static const struct usb_action mt9v111_1_AE60HZ[] = {
 	{0xa0, 0x00, ZC3XX_R180_AUTOCORRECTENABLE},
 	{0xa0, 0x00, ZC3XX_R019_AUTOADJUSTFPS},
-	{0xbb, 0x00, 0x053d},
-	{0xbb, 0x01, 0x096e},
+	{0xaa, 0x05, 0x003d},
+	{0xaa, 0x09, 0x016e},
 	{0xa0, 0x00, ZC3XX_R190_EXPOSURELIMITHIGH},
 	{0xa0, 0x07, ZC3XX_R191_EXPOSURELIMITMID},
 	{0xa0, 0xdd, ZC3XX_R192_EXPOSURELIMITLOW},
@@ -4418,7 +4431,7 @@ static const struct usb_action mi360soc_AE60HZ[] = {
 	{0xa0, 0x42, ZC3XX_R180_AUTOCORRECTENABLE},
 	{}
 };
-static const struct usb_action mi360soc_AE60HZScale[] = {
+static const struct usb_action mt9v111_1_AE60HZScale[] = {
 	{0xa0, 0x00, ZC3XX_R180_AUTOCORRECTENABLE},
 	{0xa0, 0x00, ZC3XX_R019_AUTOADJUSTFPS},
 	{0xbb, 0x00, 0x0509},
@@ -4440,7 +4453,7 @@ static const struct usb_action mi360soc_AE60HZScale[] = {
 	{0xa0, 0x42, ZC3XX_R180_AUTOCORRECTENABLE},
 	{}
 };
-static const struct usb_action mi360soc_AENoFliker[] = {
+static const struct usb_action mt9v111_1_AENoFliker[] = {
 	{0xa0, 0x00, ZC3XX_R180_AUTOCORRECTENABLE},
 	{0xa0, 0x00, ZC3XX_R019_AUTOADJUSTFPS},
 	{0xbb, 0x00, 0x0509},
@@ -4463,7 +4476,7 @@ static const struct usb_action mi360soc_AENoFliker[] = {
 	{0xa0, 0x42, ZC3XX_R180_AUTOCORRECTENABLE},
 	{}
 };
-static const struct usb_action mi360soc_AENoFlikerScale[] = {
+static const struct usb_action mt9v111_1_AENoFlikerScale[] = {
 	{0xa0, 0x00, ZC3XX_R180_AUTOCORRECTENABLE},
 	{0xa0, 0x00, ZC3XX_R019_AUTOADJUSTFPS},
 	{0xbb, 0x00, 0x0534},
@@ -4486,180 +4499,425 @@ static const struct usb_action mi360soc_AENoFlikerScale[] = {
 	{0xa0, 0x42, ZC3XX_R180_AUTOCORRECTENABLE},
 	{}
 };
-
-static const struct usb_action pb0330_Initial[] = {	/* 640x480 */
+/* from usbvm303.inf 0ac8:303b 07/03/25 (3 - tas5130c) */
+static const struct usb_action mt9v111_3_Initial[] = {
 	{0xa0, 0x01, ZC3XX_R000_SYSTEMCONTROL},
-	{0xa0, 0x03, ZC3XX_R008_CLOCKSETTING},	/* 00 */
+	{0xa0, 0x03, ZC3XX_R008_CLOCKSETTING},
 	{0xa0, 0x0a, ZC3XX_R010_CMOSSENSORSELECT},
-	{0xa0, 0x00, ZC3XX_R002_CLOCKSELECT},
+	{0xa0, 0x04, ZC3XX_R002_CLOCKSELECT},
 	{0xa0, 0x02, ZC3XX_R003_FRAMEWIDTHHIGH},
 	{0xa0, 0x80, ZC3XX_R004_FRAMEWIDTHLOW},
 	{0xa0, 0x01, ZC3XX_R005_FRAMEHEIGHTHIGH},
 	{0xa0, 0xe0, ZC3XX_R006_FRAMEHEIGHTLOW},
+	{0xa0, 0xdc, ZC3XX_R08B_I2CDEVICEADDR},
 	{0xa0, 0x01, ZC3XX_R001_SYSTEMOPERATING},
-	{0xa0, 0x05, ZC3XX_R012_VIDEOCONTROLFUNC},
 	{0xa0, 0x07, ZC3XX_R012_VIDEOCONTROLFUNC},
 	{0xa0, 0x00, ZC3XX_R098_WINYSTARTLOW},
 	{0xa0, 0x00, ZC3XX_R09A_WINXSTARTLOW},
 	{0xa0, 0x00, ZC3XX_R11A_FIRSTYLOW},
 	{0xa0, 0x00, ZC3XX_R11C_FIRSTXLOW},
+	{0xa0, 0xdc, ZC3XX_R08B_I2CDEVICEADDR},
 	{0xdd, 0x00, 0x0200},
 	{0xa0, 0x05, ZC3XX_R012_VIDEOCONTROLFUNC},
-	{0xaa, 0x01, 0x0006},
-	{0xaa, 0x02, 0x0011},
-	{0xaa, 0x03, 0x01e5},			/*jfm: was 1e7*/
-	{0xaa, 0x04, 0x0285},			/*jfm: was 0287*/
-	{0xaa, 0x06, 0x0003},
-	{0xaa, 0x07, 0x3002},
-	{0xaa, 0x20, 0x1100},
-	{0xaa, 0x2f, 0xf7b0},
+	{0xaa, 0x01, 0x0001},		/* select IFP/SOC registers */
+	{0xaa, 0x06, 0x0000},		/* operating mode control */
+	{0xaa, 0x08, 0x0483},		/* output format control */
+					/* H red first, V red or blue first,
+					 * raw Bayer, auto flicker */
+	{0xaa, 0x01, 0x0004},		/* select sensor core registers */
+	{0xaa, 0x08, 0x0006},		/* row start */
+	{0xaa, 0x02, 0x0011},		/* column start */
+	{0xaa, 0x03, 0x01e5},		/* window height - 1 */
+	{0xaa, 0x04, 0x0285},		/* window width - 1 */
+	{0xaa, 0x07, 0x3002},		/* output control */
+	{0xaa, 0x20, 0x1100},		/* read mode: bits 8 & 12 (?) */
+	{0xaa, 0x35, 0x007f},		/* global gain */
 	{0xaa, 0x30, 0x0005},
 	{0xaa, 0x31, 0x0000},
-	{0xaa, 0x34, 0x0100},
-	{0xaa, 0x35, 0x0060},
-	{0xaa, 0x3d, 0x068f},
-	{0xaa, 0x40, 0x01e0},
 	{0xaa, 0x58, 0x0078},
 	{0xaa, 0x62, 0x0411},
+	{0xaa, 0x2b, 0x007f},		/* green1 gain */
+	{0xaa, 0x2c, 0x007f},		/* blue gain */
+	{0xaa, 0x2d, 0x007f},		/* red gain */
+	{0xaa, 0x2e, 0x007f},		/* green2 gain */
 	{0xa0, 0x10, ZC3XX_R087_EXPTIMEMID},
 	{0xa0, 0x37, ZC3XX_R101_SENSORCORRECTION},
 	{0xa0, 0x05, ZC3XX_R012_VIDEOCONTROLFUNC},
 	{0xa0, 0x0d, ZC3XX_R100_OPERATIONMODE},
 	{0xa0, 0x06, ZC3XX_R189_AWBSTATUS},
-	{0xa0, 0x09, 0x01ad},			/*jfm: was 00 */
-	{0xa0, 0x15, 0x01ae},
+	{0xa0, 0x00, 0x01ad},
 	{0xa0, 0x03, ZC3XX_R1C5_SHARPNESSMODE},
 	{0xa0, 0x13, ZC3XX_R1CB_SHARPNESS05},
 	{0xa0, 0x08, ZC3XX_R250_DEADPIXELSMODE},
 	{0xa0, 0x08, ZC3XX_R301_EEPROMACCESS},
 	{0xa0, 0x60, ZC3XX_R1A8_DIGITALGAIN},
-	{0xa0, 0x78, ZC3XX_R18D_YTARGET},	/*jfm: was 6c*/
+	{0xa0, 0x80, ZC3XX_R18D_YTARGET},
+	{0xa0, 0x61, ZC3XX_R116_RGAIN},
+	{0xa0, 0x65, ZC3XX_R118_BGAIN},
 	{}
 };
-static const struct usb_action pb0330_InitialScale[] = {	/* 320x240 */
+static const struct usb_action mt9v111_3_InitialScale[] = {
 	{0xa0, 0x01, ZC3XX_R000_SYSTEMCONTROL},
-	{0xa0, 0x03, ZC3XX_R008_CLOCKSETTING},	/* 00 */
+	{0xa0, 0x03, ZC3XX_R008_CLOCKSETTING},
 	{0xa0, 0x0a, ZC3XX_R010_CMOSSENSORSELECT},
 	{0xa0, 0x10, ZC3XX_R002_CLOCKSELECT},
 	{0xa0, 0x02, ZC3XX_R003_FRAMEWIDTHHIGH},
 	{0xa0, 0x80, ZC3XX_R004_FRAMEWIDTHLOW},
 	{0xa0, 0x01, ZC3XX_R005_FRAMEHEIGHTHIGH},
 	{0xa0, 0xe0, ZC3XX_R006_FRAMEHEIGHTLOW},
+	{0xa0, 0xdc, ZC3XX_R08B_I2CDEVICEADDR},
 	{0xa0, 0x01, ZC3XX_R001_SYSTEMOPERATING},
-	{0xa0, 0x05, ZC3XX_R012_VIDEOCONTROLFUNC},
 	{0xa0, 0x07, ZC3XX_R012_VIDEOCONTROLFUNC},
 	{0xa0, 0x00, ZC3XX_R098_WINYSTARTLOW},
 	{0xa0, 0x00, ZC3XX_R09A_WINXSTARTLOW},
 	{0xa0, 0x00, ZC3XX_R11A_FIRSTYLOW},
 	{0xa0, 0x00, ZC3XX_R11C_FIRSTXLOW},
+	{0xa0, 0xdc, ZC3XX_R08B_I2CDEVICEADDR},
 	{0xdd, 0x00, 0x0200},
 	{0xa0, 0x05, ZC3XX_R012_VIDEOCONTROLFUNC},
-	{0xaa, 0x01, 0x0006},
+	{0xaa, 0x01, 0x0001},
+	{0xaa, 0x06, 0x0000},
+	{0xaa, 0x08, 0x0483},
+	{0xaa, 0x01, 0x0004},
+	{0xaa, 0x08, 0x0006},
 	{0xaa, 0x02, 0x0011},
 	{0xaa, 0x03, 0x01e7},
 	{0xaa, 0x04, 0x0287},
-	{0xaa, 0x06, 0x0003},
 	{0xaa, 0x07, 0x3002},
 	{0xaa, 0x20, 0x1100},
-	{0xaa, 0x2f, 0xf7b0},
+	{0xaa, 0x35, 0x007f},
 	{0xaa, 0x30, 0x0005},
 	{0xaa, 0x31, 0x0000},
-	{0xaa, 0x34, 0x0100},
-	{0xaa, 0x35, 0x0060},
-	{0xaa, 0x3d, 0x068f},
-	{0xaa, 0x40, 0x01e0},
 	{0xaa, 0x58, 0x0078},
 	{0xaa, 0x62, 0x0411},
+	{0xaa, 0x2b, 0x007f},
+	{0xaa, 0x2c, 0x007f},
+	{0xaa, 0x2d, 0x007f},
+	{0xaa, 0x2e, 0x007f},
 	{0xa0, 0x10, ZC3XX_R087_EXPTIMEMID},
 	{0xa0, 0x37, ZC3XX_R101_SENSORCORRECTION},
 	{0xa0, 0x05, ZC3XX_R012_VIDEOCONTROLFUNC},
 	{0xa0, 0x0d, ZC3XX_R100_OPERATIONMODE},
 	{0xa0, 0x06, ZC3XX_R189_AWBSTATUS},
-	{0xa0, 0x09, 0x01ad},
-	{0xa0, 0x15, 0x01ae},
+	{0xa0, 0x00, 0x01ad},
 	{0xa0, 0x03, ZC3XX_R1C5_SHARPNESSMODE},
 	{0xa0, 0x13, ZC3XX_R1CB_SHARPNESS05},
 	{0xa0, 0x08, ZC3XX_R250_DEADPIXELSMODE},
 	{0xa0, 0x08, ZC3XX_R301_EEPROMACCESS},
 	{0xa0, 0x60, ZC3XX_R1A8_DIGITALGAIN},
-	{0xa0, 0x78, ZC3XX_R18D_YTARGET},	/*jfm: was 6c*/
+	{0xa0, 0x80, ZC3XX_R18D_YTARGET},
+	{0xa0, 0x61, ZC3XX_R116_RGAIN},
+	{0xa0, 0x65, ZC3XX_R118_BGAIN},
 	{}
 };
-static const struct usb_action pb0330_50HZ[] = {
+static const struct usb_action mt9v111_3_AE50HZ[] = {
+	{0xa0, 0x00, ZC3XX_R180_AUTOCORRECTENABLE},
 	{0xa0, 0x00, ZC3XX_R019_AUTOADJUSTFPS},
-	{0xbb, 0x00, 0x055c},
-	{0xbb, 0x01, 0x09aa},
-	{0xbb, 0x00, 0x1001},
-	{0xa0, 0x60, ZC3XX_R11D_GLOBALGAIN},
+	{0xaa, 0x05, 0x0009},		/* horizontal blanking */
+	{0xaa, 0x09, 0x01ce},		/* shutter width */
 	{0xa0, 0x00, ZC3XX_R190_EXPOSURELIMITHIGH},
 	{0xa0, 0x07, ZC3XX_R191_EXPOSURELIMITMID},
-	{0xa0, 0xc4, ZC3XX_R192_EXPOSURELIMITLOW},
+	{0xa0, 0xd2, ZC3XX_R192_EXPOSURELIMITLOW},
 	{0xa0, 0x00, ZC3XX_R195_ANTIFLICKERHIGH},
 	{0xa0, 0x00, ZC3XX_R196_ANTIFLICKERMID},
-	{0xa0, 0x47, ZC3XX_R197_ANTIFLICKERLOW},
+	{0xa0, 0x9a, ZC3XX_R197_ANTIFLICKERLOW},
 	{0xa0, 0x0e, ZC3XX_R18C_AEFREEZE},
-	{0xa0, 0x1a, ZC3XX_R18F_AEUNFREEZE},
+	{0xa0, 0x1c, ZC3XX_R18F_AEUNFREEZE},
 	{0xa0, 0x14, ZC3XX_R1A9_DIGITALLIMITDIFF},
-	{0xa0, 0x66, ZC3XX_R1AA_DIGITALGAINSTEP},
-	{0xa0, 0x5c, ZC3XX_R01D_HSYNC_0},
-	{0xa0, 0x90, ZC3XX_R01E_HSYNC_1},
-	{0xa0, 0xc8, ZC3XX_R01F_HSYNC_2},
+	{0xa0, 0x24, ZC3XX_R1AA_DIGITALGAINSTEP},
+	{0xa0, 0xd7, ZC3XX_R01D_HSYNC_0},
+	{0xa0, 0xf4, ZC3XX_R01E_HSYNC_1},
+	{0xa0, 0xf9, ZC3XX_R01F_HSYNC_2},
 	{0xa0, 0xff, ZC3XX_R020_HSYNC_3},
+	{0xa0, 0x42, ZC3XX_R180_AUTOCORRECTENABLE},
 	{}
 };
-static const struct usb_action pb0330_50HZScale[] = {
+static const struct usb_action mt9v111_3_AE50HZScale[] = {
+	{0xa0, 0x00, ZC3XX_R180_AUTOCORRECTENABLE},
 	{0xa0, 0x00, ZC3XX_R019_AUTOADJUSTFPS},
-	{0xbb, 0x00, 0x0566},
-	{0xbb, 0x02, 0x09b2},
-	{0xbb, 0x00, 0x1002},
-	{0xa0, 0x60, ZC3XX_R11D_GLOBALGAIN},
+	{0xaa, 0x05, 0x0009},
+	{0xaa, 0x09, 0x01ce},
 	{0xa0, 0x00, ZC3XX_R190_EXPOSURELIMITHIGH},
 	{0xa0, 0x07, ZC3XX_R191_EXPOSURELIMITMID},
-	{0xa0, 0x8c, ZC3XX_R192_EXPOSURELIMITLOW},
+	{0xa0, 0xd2, ZC3XX_R192_EXPOSURELIMITLOW},
 	{0xa0, 0x00, ZC3XX_R195_ANTIFLICKERHIGH},
 	{0xa0, 0x00, ZC3XX_R196_ANTIFLICKERMID},
-	{0xa0, 0x8a, ZC3XX_R197_ANTIFLICKERLOW},
+	{0xa0, 0x9a, ZC3XX_R197_ANTIFLICKERLOW},
 	{0xa0, 0x0e, ZC3XX_R18C_AEFREEZE},
-	{0xa0, 0x1a, ZC3XX_R18F_AEUNFREEZE},
+	{0xa0, 0x1c, ZC3XX_R18F_AEUNFREEZE},
 	{0xa0, 0x14, ZC3XX_R1A9_DIGITALLIMITDIFF},
-	{0xa0, 0x66, ZC3XX_R1AA_DIGITALGAINSTEP},
+	{0xa0, 0x24, ZC3XX_R1AA_DIGITALGAINSTEP},
 	{0xa0, 0xd7, ZC3XX_R01D_HSYNC_0},
-	{0xa0, 0xf0, ZC3XX_R01E_HSYNC_1},
-	{0xa0, 0xf8, ZC3XX_R01F_HSYNC_2},
+	{0xa0, 0xf4, ZC3XX_R01E_HSYNC_1},
+	{0xa0, 0xf9, ZC3XX_R01F_HSYNC_2},
 	{0xa0, 0xff, ZC3XX_R020_HSYNC_3},
+	{0xa0, 0x42, ZC3XX_R180_AUTOCORRECTENABLE},
 	{}
 };
-static const struct usb_action pb0330_60HZ[] = {
+static const struct usb_action mt9v111_3_AE60HZ[] = {
+	{0xa0, 0x00, ZC3XX_R180_AUTOCORRECTENABLE},
 	{0xa0, 0x00, ZC3XX_R019_AUTOADJUSTFPS},
-	{0xbb, 0x00, 0x0535},
-	{0xbb, 0x01, 0x0974},
-	{0xbb, 0x00, 0x1001},
-	{0xa0, 0x60, ZC3XX_R11D_GLOBALGAIN},
+	{0xaa, 0x05, 0x0009},
+	{0xaa, 0x09, 0x0083},
 	{0xa0, 0x00, ZC3XX_R190_EXPOSURELIMITHIGH},
 	{0xa0, 0x07, ZC3XX_R191_EXPOSURELIMITMID},
-	{0xa0, 0xfe, ZC3XX_R192_EXPOSURELIMITLOW},
+	{0xa0, 0x8f, ZC3XX_R192_EXPOSURELIMITLOW},
 	{0xa0, 0x00, ZC3XX_R195_ANTIFLICKERHIGH},
 	{0xa0, 0x00, ZC3XX_R196_ANTIFLICKERMID},
-	{0xa0, 0x3e, ZC3XX_R197_ANTIFLICKERLOW},
+	{0xa0, 0x81, ZC3XX_R197_ANTIFLICKERLOW},
 	{0xa0, 0x0e, ZC3XX_R18C_AEFREEZE},
-	{0xa0, 0x1a, ZC3XX_R18F_AEUNFREEZE},
+	{0xa0, 0x1c, ZC3XX_R18F_AEUNFREEZE},
 	{0xa0, 0x14, ZC3XX_R1A9_DIGITALLIMITDIFF},
-	{0xa0, 0x66, ZC3XX_R1AA_DIGITALGAINSTEP},
-	{0xa0, 0x35, ZC3XX_R01D_HSYNC_0},
-	{0xa0, 0x50, ZC3XX_R01E_HSYNC_1},
-	{0xa0, 0x90, ZC3XX_R01F_HSYNC_2},
-	{0xa0, 0xd0, ZC3XX_R020_HSYNC_3},
+	{0xa0, 0x24, ZC3XX_R1AA_DIGITALGAINSTEP},
+	{0xa0, 0xd7, ZC3XX_R01D_HSYNC_0},
+	{0xa0, 0xf4, ZC3XX_R01E_HSYNC_1},
+	{0xa0, 0xf9, ZC3XX_R01F_HSYNC_2},
+	{0xa0, 0xff, ZC3XX_R020_HSYNC_3},
+	{0xa0, 0x42, ZC3XX_R180_AUTOCORRECTENABLE},
 	{}
 };
-static const struct usb_action pb0330_60HZScale[] = {
+static const struct usb_action mt9v111_3_AE60HZScale[] = {
+	{0xa0, 0x00, ZC3XX_R180_AUTOCORRECTENABLE},
 	{0xa0, 0x00, ZC3XX_R019_AUTOADJUSTFPS},
-	{0xbb, 0x00, 0x0535},
-	{0xbb, 0x02, 0x096c},
-	{0xbb, 0x00, 0x1002},
-	{0xa0, 0x60, ZC3XX_R11D_GLOBALGAIN},
+	{0xaa, 0x05, 0x0009},
+	{0xaa, 0x09, 0x0083},
 	{0xa0, 0x00, ZC3XX_R190_EXPOSURELIMITHIGH},
 	{0xa0, 0x07, ZC3XX_R191_EXPOSURELIMITMID},
-	{0xa0, 0xc0, ZC3XX_R192_EXPOSURELIMITLOW},
+	{0xa0, 0x8f, ZC3XX_R192_EXPOSURELIMITLOW},
+	{0xa0, 0x00, ZC3XX_R195_ANTIFLICKERHIGH},
+	{0xa0, 0x00, ZC3XX_R196_ANTIFLICKERMID},
+	{0xa0, 0x81, ZC3XX_R197_ANTIFLICKERLOW},
+	{0xa0, 0x0e, ZC3XX_R18C_AEFREEZE},
+	{0xa0, 0x1c, ZC3XX_R18F_AEUNFREEZE},
+	{0xa0, 0x14, ZC3XX_R1A9_DIGITALLIMITDIFF},
+	{0xa0, 0x24, ZC3XX_R1AA_DIGITALGAINSTEP},
+	{0xa0, 0xd7, ZC3XX_R01D_HSYNC_0},
+	{0xa0, 0xf4, ZC3XX_R01E_HSYNC_1},
+	{0xa0, 0xf9, ZC3XX_R01F_HSYNC_2},
+	{0xa0, 0xff, ZC3XX_R020_HSYNC_3},
+	{0xa0, 0x42, ZC3XX_R180_AUTOCORRECTENABLE},
+	{}
+};
+static const struct usb_action mt9v111_3_AENoFliker[] = {
+	{0xa0, 0x00, ZC3XX_R180_AUTOCORRECTENABLE},
+	{0xa0, 0x00, ZC3XX_R019_AUTOADJUSTFPS},
+	{0xaa, 0x05, 0x0034},
+	{0xaa, 0x09, 0x0260},
+	{0xa0, 0x00, ZC3XX_R190_EXPOSURELIMITHIGH},
+	{0xa0, 0x07, ZC3XX_R191_EXPOSURELIMITMID},
+	{0xa0, 0xf0, ZC3XX_R192_EXPOSURELIMITLOW},
+	{0xa0, 0x00, ZC3XX_R195_ANTIFLICKERHIGH},
+	{0xa0, 0x00, ZC3XX_R196_ANTIFLICKERMID},
+	{0xa0, 0x04, ZC3XX_R197_ANTIFLICKERLOW},
+	{0xa0, 0x0e, ZC3XX_R18C_AEFREEZE},
+	{0xa0, 0x1c, ZC3XX_R18F_AEUNFREEZE},
+	{0xa0, 0x00, ZC3XX_R1A9_DIGITALLIMITDIFF},
+	{0xa0, 0x00, ZC3XX_R1AA_DIGITALGAINSTEP},
+	{0xa0, 0x34, ZC3XX_R01D_HSYNC_0},
+	{0xa0, 0x60, ZC3XX_R01E_HSYNC_1},
+	{0xa0, 0x90, ZC3XX_R01F_HSYNC_2},
+	{0xa0, 0xe0, ZC3XX_R020_HSYNC_3},
+	{0xa0, 0x60, ZC3XX_R11D_GLOBALGAIN},
+	{0xa0, 0x42, ZC3XX_R180_AUTOCORRECTENABLE},
+	{}
+};
+static const struct usb_action mt9v111_3_AENoFlikerScale[] = {
+	{0xa0, 0x00, ZC3XX_R180_AUTOCORRECTENABLE},
+	{0xa0, 0x00, ZC3XX_R019_AUTOADJUSTFPS},
+	{0xaa, 0x05, 0x0034},
+	{0xaa, 0x09, 0x0260},
+	{0xa0, 0x00, ZC3XX_R190_EXPOSURELIMITHIGH},
+	{0xa0, 0x07, ZC3XX_R191_EXPOSURELIMITMID},
+	{0xa0, 0xf0, ZC3XX_R192_EXPOSURELIMITLOW},
+	{0xa0, 0x00, ZC3XX_R195_ANTIFLICKERHIGH},
+	{0xa0, 0x00, ZC3XX_R196_ANTIFLICKERMID},
+	{0xa0, 0x04, ZC3XX_R197_ANTIFLICKERLOW},
+	{0xa0, 0x0e, ZC3XX_R18C_AEFREEZE},
+	{0xa0, 0x1c, ZC3XX_R18F_AEUNFREEZE},
+	{0xa0, 0x00, ZC3XX_R1A9_DIGITALLIMITDIFF},
+	{0xa0, 0x00, ZC3XX_R1AA_DIGITALGAINSTEP},
+	{0xa0, 0x34, ZC3XX_R01D_HSYNC_0},
+	{0xa0, 0x60, ZC3XX_R01E_HSYNC_1},
+	{0xa0, 0x90, ZC3XX_R01F_HSYNC_2},
+	{0xa0, 0xe0, ZC3XX_R020_HSYNC_3},
+	{0xa0, 0x60, ZC3XX_R11D_GLOBALGAIN},
+	{0xa0, 0x42, ZC3XX_R180_AUTOCORRECTENABLE},
+	{}
+};
+
+static const struct usb_action pb0330_Initial[] = {	/* 640x480 */
+	{0xa0, 0x01, ZC3XX_R000_SYSTEMCONTROL},
+	{0xa0, 0x03, ZC3XX_R008_CLOCKSETTING},	/* 00 */
+	{0xa0, 0x0a, ZC3XX_R010_CMOSSENSORSELECT},
+	{0xa0, 0x00, ZC3XX_R002_CLOCKSELECT},
+	{0xa0, 0x02, ZC3XX_R003_FRAMEWIDTHHIGH},
+	{0xa0, 0x80, ZC3XX_R004_FRAMEWIDTHLOW},
+	{0xa0, 0x01, ZC3XX_R005_FRAMEHEIGHTHIGH},
+	{0xa0, 0xe0, ZC3XX_R006_FRAMEHEIGHTLOW},
+	{0xa0, 0x01, ZC3XX_R001_SYSTEMOPERATING},
+	{0xa0, 0x05, ZC3XX_R012_VIDEOCONTROLFUNC},
+	{0xa0, 0x07, ZC3XX_R012_VIDEOCONTROLFUNC},
+	{0xa0, 0x00, ZC3XX_R098_WINYSTARTLOW},
+	{0xa0, 0x00, ZC3XX_R09A_WINXSTARTLOW},
+	{0xa0, 0x00, ZC3XX_R11A_FIRSTYLOW},
+	{0xa0, 0x00, ZC3XX_R11C_FIRSTXLOW},
+	{0xdd, 0x00, 0x0200},
+	{0xa0, 0x05, ZC3XX_R012_VIDEOCONTROLFUNC},
+	{0xaa, 0x01, 0x0006},
+	{0xaa, 0x02, 0x0011},
+	{0xaa, 0x03, 0x01e5},			/*jfm: was 1e7*/
+	{0xaa, 0x04, 0x0285},			/*jfm: was 0287*/
+	{0xaa, 0x06, 0x0003},
+	{0xaa, 0x07, 0x3002},
+	{0xaa, 0x20, 0x1100},
+	{0xaa, 0x2f, 0xf7b0},
+	{0xaa, 0x30, 0x0005},
+	{0xaa, 0x31, 0x0000},
+	{0xaa, 0x34, 0x0100},
+	{0xaa, 0x35, 0x0060},
+	{0xaa, 0x3d, 0x068f},
+	{0xaa, 0x40, 0x01e0},
+	{0xaa, 0x58, 0x0078},
+	{0xaa, 0x62, 0x0411},
+	{0xa0, 0x10, ZC3XX_R087_EXPTIMEMID},
+	{0xa0, 0x37, ZC3XX_R101_SENSORCORRECTION},
+	{0xa0, 0x05, ZC3XX_R012_VIDEOCONTROLFUNC},
+	{0xa0, 0x0d, ZC3XX_R100_OPERATIONMODE},
+	{0xa0, 0x06, ZC3XX_R189_AWBSTATUS},
+	{0xa0, 0x09, 0x01ad},			/*jfm: was 00 */
+	{0xa0, 0x15, 0x01ae},
+	{0xa0, 0x03, ZC3XX_R1C5_SHARPNESSMODE},
+	{0xa0, 0x13, ZC3XX_R1CB_SHARPNESS05},
+	{0xa0, 0x08, ZC3XX_R250_DEADPIXELSMODE},
+	{0xa0, 0x08, ZC3XX_R301_EEPROMACCESS},
+	{0xa0, 0x60, ZC3XX_R1A8_DIGITALGAIN},
+	{0xa0, 0x78, ZC3XX_R18D_YTARGET},	/*jfm: was 6c*/
+	{}
+};
+static const struct usb_action pb0330_InitialScale[] = {	/* 320x240 */
+	{0xa0, 0x01, ZC3XX_R000_SYSTEMCONTROL},
+	{0xa0, 0x03, ZC3XX_R008_CLOCKSETTING},	/* 00 */
+	{0xa0, 0x0a, ZC3XX_R010_CMOSSENSORSELECT},
+	{0xa0, 0x10, ZC3XX_R002_CLOCKSELECT},
+	{0xa0, 0x02, ZC3XX_R003_FRAMEWIDTHHIGH},
+	{0xa0, 0x80, ZC3XX_R004_FRAMEWIDTHLOW},
+	{0xa0, 0x01, ZC3XX_R005_FRAMEHEIGHTHIGH},
+	{0xa0, 0xe0, ZC3XX_R006_FRAMEHEIGHTLOW},
+	{0xa0, 0x01, ZC3XX_R001_SYSTEMOPERATING},
+	{0xa0, 0x05, ZC3XX_R012_VIDEOCONTROLFUNC},
+	{0xa0, 0x07, ZC3XX_R012_VIDEOCONTROLFUNC},
+	{0xa0, 0x00, ZC3XX_R098_WINYSTARTLOW},
+	{0xa0, 0x00, ZC3XX_R09A_WINXSTARTLOW},
+	{0xa0, 0x00, ZC3XX_R11A_FIRSTYLOW},
+	{0xa0, 0x00, ZC3XX_R11C_FIRSTXLOW},
+	{0xdd, 0x00, 0x0200},
+	{0xa0, 0x05, ZC3XX_R012_VIDEOCONTROLFUNC},
+	{0xaa, 0x01, 0x0006},
+	{0xaa, 0x02, 0x0011},
+	{0xaa, 0x03, 0x01e7},
+	{0xaa, 0x04, 0x0287},
+	{0xaa, 0x06, 0x0003},
+	{0xaa, 0x07, 0x3002},
+	{0xaa, 0x20, 0x1100},
+	{0xaa, 0x2f, 0xf7b0},
+	{0xaa, 0x30, 0x0005},
+	{0xaa, 0x31, 0x0000},
+	{0xaa, 0x34, 0x0100},
+	{0xaa, 0x35, 0x0060},
+	{0xaa, 0x3d, 0x068f},
+	{0xaa, 0x40, 0x01e0},
+	{0xaa, 0x58, 0x0078},
+	{0xaa, 0x62, 0x0411},
+	{0xa0, 0x10, ZC3XX_R087_EXPTIMEMID},
+	{0xa0, 0x37, ZC3XX_R101_SENSORCORRECTION},
+	{0xa0, 0x05, ZC3XX_R012_VIDEOCONTROLFUNC},
+	{0xa0, 0x0d, ZC3XX_R100_OPERATIONMODE},
+	{0xa0, 0x06, ZC3XX_R189_AWBSTATUS},
+	{0xa0, 0x09, 0x01ad},
+	{0xa0, 0x15, 0x01ae},
+	{0xa0, 0x03, ZC3XX_R1C5_SHARPNESSMODE},
+	{0xa0, 0x13, ZC3XX_R1CB_SHARPNESS05},
+	{0xa0, 0x08, ZC3XX_R250_DEADPIXELSMODE},
+	{0xa0, 0x08, ZC3XX_R301_EEPROMACCESS},
+	{0xa0, 0x60, ZC3XX_R1A8_DIGITALGAIN},
+	{0xa0, 0x78, ZC3XX_R18D_YTARGET},	/*jfm: was 6c*/
+	{}
+};
+static const struct usb_action pb0330_50HZ[] = {
+	{0xa0, 0x00, ZC3XX_R019_AUTOADJUSTFPS},
+	{0xbb, 0x00, 0x055c},
+	{0xbb, 0x01, 0x09aa},
+	{0xbb, 0x00, 0x1001},
+	{0xa0, 0x60, ZC3XX_R11D_GLOBALGAIN},
+	{0xa0, 0x00, ZC3XX_R190_EXPOSURELIMITHIGH},
+	{0xa0, 0x07, ZC3XX_R191_EXPOSURELIMITMID},
+	{0xa0, 0xc4, ZC3XX_R192_EXPOSURELIMITLOW},
+	{0xa0, 0x00, ZC3XX_R195_ANTIFLICKERHIGH},
+	{0xa0, 0x00, ZC3XX_R196_ANTIFLICKERMID},
+	{0xa0, 0x47, ZC3XX_R197_ANTIFLICKERLOW},
+	{0xa0, 0x0e, ZC3XX_R18C_AEFREEZE},
+	{0xa0, 0x1a, ZC3XX_R18F_AEUNFREEZE},
+	{0xa0, 0x14, ZC3XX_R1A9_DIGITALLIMITDIFF},
+	{0xa0, 0x66, ZC3XX_R1AA_DIGITALGAINSTEP},
+	{0xa0, 0x5c, ZC3XX_R01D_HSYNC_0},
+	{0xa0, 0x90, ZC3XX_R01E_HSYNC_1},
+	{0xa0, 0xc8, ZC3XX_R01F_HSYNC_2},
+	{0xa0, 0xff, ZC3XX_R020_HSYNC_3},
+	{}
+};
+static const struct usb_action pb0330_50HZScale[] = {
+	{0xa0, 0x00, ZC3XX_R019_AUTOADJUSTFPS},
+	{0xbb, 0x00, 0x0566},
+	{0xbb, 0x02, 0x09b2},
+	{0xbb, 0x00, 0x1002},
+	{0xa0, 0x60, ZC3XX_R11D_GLOBALGAIN},
+	{0xa0, 0x00, ZC3XX_R190_EXPOSURELIMITHIGH},
+	{0xa0, 0x07, ZC3XX_R191_EXPOSURELIMITMID},
+	{0xa0, 0x8c, ZC3XX_R192_EXPOSURELIMITLOW},
+	{0xa0, 0x00, ZC3XX_R195_ANTIFLICKERHIGH},
+	{0xa0, 0x00, ZC3XX_R196_ANTIFLICKERMID},
+	{0xa0, 0x8a, ZC3XX_R197_ANTIFLICKERLOW},
+	{0xa0, 0x0e, ZC3XX_R18C_AEFREEZE},
+	{0xa0, 0x1a, ZC3XX_R18F_AEUNFREEZE},
+	{0xa0, 0x14, ZC3XX_R1A9_DIGITALLIMITDIFF},
+	{0xa0, 0x66, ZC3XX_R1AA_DIGITALGAINSTEP},
+	{0xa0, 0xd7, ZC3XX_R01D_HSYNC_0},
+	{0xa0, 0xf0, ZC3XX_R01E_HSYNC_1},
+	{0xa0, 0xf8, ZC3XX_R01F_HSYNC_2},
+	{0xa0, 0xff, ZC3XX_R020_HSYNC_3},
+	{}
+};
+static const struct usb_action pb0330_60HZ[] = {
+	{0xa0, 0x00, ZC3XX_R019_AUTOADJUSTFPS},
+	{0xbb, 0x00, 0x0535},
+	{0xbb, 0x01, 0x0974},
+	{0xbb, 0x00, 0x1001},
+	{0xa0, 0x60, ZC3XX_R11D_GLOBALGAIN},
+	{0xa0, 0x00, ZC3XX_R190_EXPOSURELIMITHIGH},
+	{0xa0, 0x07, ZC3XX_R191_EXPOSURELIMITMID},
+	{0xa0, 0xfe, ZC3XX_R192_EXPOSURELIMITLOW},
+	{0xa0, 0x00, ZC3XX_R195_ANTIFLICKERHIGH},
+	{0xa0, 0x00, ZC3XX_R196_ANTIFLICKERMID},
+	{0xa0, 0x3e, ZC3XX_R197_ANTIFLICKERLOW},
+	{0xa0, 0x0e, ZC3XX_R18C_AEFREEZE},
+	{0xa0, 0x1a, ZC3XX_R18F_AEUNFREEZE},
+	{0xa0, 0x14, ZC3XX_R1A9_DIGITALLIMITDIFF},
+	{0xa0, 0x66, ZC3XX_R1AA_DIGITALGAINSTEP},
+	{0xa0, 0x35, ZC3XX_R01D_HSYNC_0},
+	{0xa0, 0x50, ZC3XX_R01E_HSYNC_1},
+	{0xa0, 0x90, ZC3XX_R01F_HSYNC_2},
+	{0xa0, 0xd0, ZC3XX_R020_HSYNC_3},
+	{}
+};
+static const struct usb_action pb0330_60HZScale[] = {
+	{0xa0, 0x00, ZC3XX_R019_AUTOADJUSTFPS},
+	{0xbb, 0x00, 0x0535},
+	{0xbb, 0x02, 0x096c},
+	{0xbb, 0x00, 0x1002},
+	{0xa0, 0x60, ZC3XX_R11D_GLOBALGAIN},
+	{0xa0, 0x00, ZC3XX_R190_EXPOSURELIMITHIGH},
+	{0xa0, 0x07, ZC3XX_R191_EXPOSURELIMITMID},
+	{0xa0, 0xc0, ZC3XX_R192_EXPOSURELIMITLOW},
 	{0xa0, 0x00, ZC3XX_R195_ANTIFLICKERHIGH},
 	{0xa0, 0x00, ZC3XX_R196_ANTIFLICKERMID},
 	{0xa0, 0x7c, ZC3XX_R197_ANTIFLICKERLOW},
@@ -4855,492 +5113,80 @@ static const struct usb_action po2030_InitialScale[] = {	/* 320x240 */
 	{0xaa, 0x58, 0x0002}, /* 00,58,02,aa */
 	{0xaa, 0x66, 0x00c0}, /* 00,66,c0,aa */
 	{0xaa, 0x67, 0x0044}, /* 00,67,44,aa */
-	{0xaa, 0x6b, 0x00a0}, /* 00,6b,a0,aa */
-	{0xaa, 0x6c, 0x0054}, /* 00,6c,54,aa */
-	{0xaa, 0xd6, 0x0007}, /* 00,d6,07,aa */
-	{0xa0, 0xf7, ZC3XX_R101_SENSORCORRECTION}, /* 01,01,f7,cc */
-	{0xa0, 0x05, ZC3XX_R012_VIDEOCONTROLFUNC}, /* 00,12,05,cc */
-	{0xa0, 0x0d, ZC3XX_R100_OPERATIONMODE}, /* 01,00,0d,cc */
-	{0xa0, 0x06, ZC3XX_R189_AWBSTATUS}, /* 01,89,06,cc */
-	{0xa0, 0x00, 0x01ad}, /* 01,ad,00,cc */
-	{0xa0, 0x03, ZC3XX_R1C5_SHARPNESSMODE}, /* 01,c5,03,cc */
-	{0xa0, 0x13, ZC3XX_R1CB_SHARPNESS05}, /* 01,cb,13,cc */
-	{0xa0, 0x08, ZC3XX_R250_DEADPIXELSMODE}, /* 02,50,08,cc */
-	{0xa0, 0x08, ZC3XX_R301_EEPROMACCESS}, /* 03,01,08,cc */
-	{0xa0, 0x7a, ZC3XX_R116_RGAIN}, /* 01,16,7a,cc */
-	{0xa0, 0x4a, ZC3XX_R118_BGAIN}, /* 01,18,4a,cc */
-	{}
-};
-
-static const struct usb_action po2030_50HZ[] = {
-	{0xaa, 0x8d, 0x0008}, /* 00,8d,08,aa */
-	{0xaa, 0x1a, 0x0001}, /* 00,1a,01,aa */
-	{0xaa, 0x1b, 0x000a}, /* 00,1b,0a,aa */
-	{0xaa, 0x1c, 0x00b0}, /* 00,1c,b0,aa */
-	{0xa0, 0x05, ZC3XX_R190_EXPOSURELIMITHIGH}, /* 01,90,05,cc */
-	{0xa0, 0x35, ZC3XX_R191_EXPOSURELIMITMID}, /* 01,91,35,cc */
-	{0xa0, 0x70, ZC3XX_R192_EXPOSURELIMITLOW}, /* 01,92,70,cc */
-	{0xa0, 0x00, ZC3XX_R195_ANTIFLICKERHIGH}, /* 01,95,00,cc */
-	{0xa0, 0x85, ZC3XX_R196_ANTIFLICKERMID}, /* 01,96,85,cc */
-	{0xa0, 0x58, ZC3XX_R197_ANTIFLICKERLOW}, /* 01,97,58,cc */
-	{0xa0, 0x0c, ZC3XX_R18C_AEFREEZE}, /* 01,8c,0c,cc */
-	{0xa0, 0x18, ZC3XX_R18F_AEUNFREEZE}, /* 01,8f,18,cc */
-	{0xa0, 0x60, ZC3XX_R1A8_DIGITALGAIN}, /* 01,a8,60,cc */
-	{0xa0, 0x10, ZC3XX_R1A9_DIGITALLIMITDIFF}, /* 01,a9,10,cc */
-	{0xa0, 0x22, ZC3XX_R1AA_DIGITALGAINSTEP}, /* 01,aa,22,cc */
-	{0xa0, 0x88, ZC3XX_R18D_YTARGET}, /* 01,8d,88,cc */
-	{0xa0, 0x58, ZC3XX_R11D_GLOBALGAIN}, /* 01,1d,58,cc */
-	{0xa0, 0x42, ZC3XX_R180_AUTOCORRECTENABLE}, /* 01,80,42,cc */
-	{}
-};
-
-static const struct usb_action po2030_60HZ[] = {
-	{0xaa, 0x8d, 0x0008}, /* 00,8d,08,aa */
-	{0xaa, 0x1a, 0x0000}, /* 00,1a,00,aa */
-	{0xaa, 0x1b, 0x00de}, /* 00,1b,de,aa */
-	{0xaa, 0x1c, 0x0040}, /* 00,1c,40,aa */
-	{0xa0, 0x08, ZC3XX_R190_EXPOSURELIMITHIGH}, /* 01,90,08,cc */
-	{0xa0, 0xae, ZC3XX_R191_EXPOSURELIMITMID}, /* 01,91,ae,cc */
-	{0xa0, 0x80, ZC3XX_R192_EXPOSURELIMITLOW}, /* 01,92,80,cc */
-	{0xa0, 0x00, ZC3XX_R195_ANTIFLICKERHIGH}, /* 01,95,00,cc */
-	{0xa0, 0x6f, ZC3XX_R196_ANTIFLICKERMID}, /* 01,96,6f,cc */
-	{0xa0, 0x20, ZC3XX_R197_ANTIFLICKERLOW}, /* 01,97,20,cc */
-	{0xa0, 0x0c, ZC3XX_R18C_AEFREEZE}, /* 01,8c,0c,cc */
-	{0xa0, 0x18, ZC3XX_R18F_AEUNFREEZE}, /* 01,8f,18,cc */
-	{0xa0, 0x60, ZC3XX_R1A8_DIGITALGAIN}, /* 01,a8,60,cc */
-	{0xa0, 0x10, ZC3XX_R1A9_DIGITALLIMITDIFF}, /* 01,a9,10,cc */
-	{0xa0, 0x22, ZC3XX_R1AA_DIGITALGAINSTEP},	/* 01,aa,22,cc */
-	{0xa0, 0x88, ZC3XX_R18D_YTARGET},		/* 01,8d,88,cc */
-							/* win: 01,8d,80 */
-	{0xa0, 0x58, ZC3XX_R11D_GLOBALGAIN},		/* 01,1d,58,cc */
-	{0xa0, 0x42, ZC3XX_R180_AUTOCORRECTENABLE},	/* 01,80,42,cc */
-	{}
-};
-
-static const struct usb_action po2030_NoFliker[] = {
-	{0xa0, 0x02, ZC3XX_R180_AUTOCORRECTENABLE}, /* 01,80,02,cc */
-	{0xaa, 0x8d, 0x000d}, /* 00,8d,0d,aa */
-	{0xaa, 0x1a, 0x0000}, /* 00,1a,00,aa */
-	{0xaa, 0x1b, 0x0002}, /* 00,1b,02,aa */
-	{0xaa, 0x1c, 0x0078}, /* 00,1c,78,aa */
-	{0xaa, 0x46, 0x0000}, /* 00,46,00,aa */
-	{0xaa, 0x15, 0x0000}, /* 00,15,00,aa */
-	{}
-};
-
-/* TEST */
-static const struct usb_action tas5130cK_InitialScale[] = {
-	{0xa0, 0x01, ZC3XX_R000_SYSTEMCONTROL},
-	{0xa0, 0x01, 0x003b},
-	{0xa0, 0x0e, 0x003a},
-	{0xa0, 0x01, 0x0038},
-	{0xa0, 0x0b, 0x0039},
-	{0xa0, 0x00, 0x0038},
-	{0xa0, 0x0b, 0x0039},
-	{0xa0, 0x01, ZC3XX_R000_SYSTEMCONTROL},
-	{0xa0, 0x03, ZC3XX_R008_CLOCKSETTING},
-	{0xa0, 0x0a, ZC3XX_R010_CMOSSENSORSELECT},
-	{0xa0, 0x10, ZC3XX_R002_CLOCKSELECT},
-	{0xa0, 0x02, ZC3XX_R003_FRAMEWIDTHHIGH},
-	{0xa0, 0x80, ZC3XX_R004_FRAMEWIDTHLOW},
-	{0xa0, 0x01, ZC3XX_R005_FRAMEHEIGHTHIGH},
-	{0xa0, 0xe0, ZC3XX_R006_FRAMEHEIGHTLOW},
-	{0xa0, 0xdc, ZC3XX_R08B_I2CDEVICEADDR},
-	{0xa0, 0x01, ZC3XX_R001_SYSTEMOPERATING},
-	{0xa0, 0x07, ZC3XX_R012_VIDEOCONTROLFUNC},
-	{0xa0, 0x00, ZC3XX_R098_WINYSTARTLOW},
-	{0xa0, 0x00, ZC3XX_R09A_WINXSTARTLOW},
-	{0xa0, 0x00, ZC3XX_R11A_FIRSTYLOW},
-	{0xa0, 0x00, ZC3XX_R11C_FIRSTXLOW},
-	{0xa0, 0xdc, ZC3XX_R08B_I2CDEVICEADDR},
-	{0xa0, 0x05, ZC3XX_R012_VIDEOCONTROLFUNC},
-	{0xa0, 0x01, ZC3XX_R092_I2CADDRESSSELECT},
-	{0xa0, 0x01, ZC3XX_R093_I2CSETVALUE},
-	{0xa0, 0x00, ZC3XX_R094_I2CWRITEACK},
-	{0xa0, 0x01, ZC3XX_R090_I2CCOMMAND},
-	{0xa0, 0x06, ZC3XX_R092_I2CADDRESSSELECT},
-	{0xa0, 0x00, ZC3XX_R093_I2CSETVALUE},
-	{0xa0, 0x00, ZC3XX_R094_I2CWRITEACK},
-	{0xa0, 0x01, ZC3XX_R090_I2CCOMMAND},
-	{0xa0, 0x08, ZC3XX_R092_I2CADDRESSSELECT},
-	{0xa0, 0x83, ZC3XX_R093_I2CSETVALUE},
-	{0xa0, 0x04, ZC3XX_R094_I2CWRITEACK},
-	{0xa0, 0x01, ZC3XX_R090_I2CCOMMAND},
-	{0xa0, 0x01, ZC3XX_R092_I2CADDRESSSELECT},
-	{0xa0, 0x04, ZC3XX_R093_I2CSETVALUE},
-	{0xa0, 0x00, ZC3XX_R094_I2CWRITEACK},
-	{0xa0, 0x01, ZC3XX_R090_I2CCOMMAND},
-	{0xa0, 0x08, ZC3XX_R092_I2CADDRESSSELECT},
-	{0xa0, 0x06, ZC3XX_R093_I2CSETVALUE},
-	{0xa0, 0x00, ZC3XX_R094_I2CWRITEACK},
-	{0xa0, 0x01, ZC3XX_R090_I2CCOMMAND},
-	{0xa0, 0x02, ZC3XX_R092_I2CADDRESSSELECT},
-	{0xa0, 0x11, ZC3XX_R093_I2CSETVALUE},
-	{0xa0, 0x00, ZC3XX_R094_I2CWRITEACK},
-	{0xa0, 0x01, ZC3XX_R090_I2CCOMMAND},
-	{0xa0, 0x03, ZC3XX_R092_I2CADDRESSSELECT},
-	{0xa0, 0xE7, ZC3XX_R093_I2CSETVALUE},
-	{0xa0, 0x01, ZC3XX_R094_I2CWRITEACK},
-	{0xa0, 0x01, ZC3XX_R090_I2CCOMMAND},
-	{0xa0, 0x04, ZC3XX_R092_I2CADDRESSSELECT},
-	{0xa0, 0x87, ZC3XX_R093_I2CSETVALUE},
-	{0xa0, 0x02, ZC3XX_R094_I2CWRITEACK},
-	{0xa0, 0x01, ZC3XX_R090_I2CCOMMAND},
-	{0xa0, 0x07, ZC3XX_R092_I2CADDRESSSELECT},
-	{0xa0, 0x02, ZC3XX_R093_I2CSETVALUE},
-	{0xa0, 0x30, ZC3XX_R094_I2CWRITEACK},
-	{0xa0, 0x01, ZC3XX_R090_I2CCOMMAND},
-	{0xa0, 0x20, ZC3XX_R092_I2CADDRESSSELECT},
-	{0xa0, 0x00, ZC3XX_R093_I2CSETVALUE},
-	{0xa0, 0x51, ZC3XX_R094_I2CWRITEACK},
-	{0xa0, 0x01, ZC3XX_R090_I2CCOMMAND},
-	{0xa0, 0x35, ZC3XX_R092_I2CADDRESSSELECT},
-	{0xa0, 0x7F, ZC3XX_R093_I2CSETVALUE},
-	{0xa0, 0x00, ZC3XX_R094_I2CWRITEACK},
-	{0xa0, 0x01, ZC3XX_R090_I2CCOMMAND},
-	{0xa0, 0x30, ZC3XX_R092_I2CADDRESSSELECT},
-	{0xa0, 0x05, ZC3XX_R093_I2CSETVALUE},
-	{0xa0, 0x00, ZC3XX_R094_I2CWRITEACK},
-	{0xa0, 0x01, ZC3XX_R090_I2CCOMMAND},
-	{0xa0, 0x31, ZC3XX_R092_I2CADDRESSSELECT},
-	{0xa0, 0x00, ZC3XX_R093_I2CSETVALUE},
-	{0xa0, 0x00, ZC3XX_R094_I2CWRITEACK},
-	{0xa0, 0x01, ZC3XX_R090_I2CCOMMAND},
-	{0xa0, 0x58, ZC3XX_R092_I2CADDRESSSELECT},
-	{0xa0, 0x78, ZC3XX_R093_I2CSETVALUE},
-	{0xa0, 0x00, ZC3XX_R094_I2CWRITEACK},
-	{0xa0, 0x01, ZC3XX_R090_I2CCOMMAND},
-	{0xa0, 0x62, ZC3XX_R092_I2CADDRESSSELECT},
-	{0xa0, 0x11, ZC3XX_R093_I2CSETVALUE},
-	{0xa0, 0x04, ZC3XX_R094_I2CWRITEACK},
-	{0xa0, 0x01, ZC3XX_R090_I2CCOMMAND},
-	{0xa0, 0x2B, ZC3XX_R092_I2CADDRESSSELECT},
-	{0xa0, 0x7f, ZC3XX_R093_I2CSETVALUE},
-	{0xa0, 0x00, ZC3XX_R094_I2CWRITEACK},
-	{0xa0, 0x01, ZC3XX_R090_I2CCOMMAND},
-	{0xa0, 0x2c, ZC3XX_R092_I2CADDRESSSELECT},
-	{0xa0, 0x7f, ZC3XX_R093_I2CSETVALUE},
-	{0xa0, 0x00, ZC3XX_R094_I2CWRITEACK},
-	{0xa0, 0x01, ZC3XX_R090_I2CCOMMAND},
-	{0xa0, 0x2D, ZC3XX_R092_I2CADDRESSSELECT},
-	{0xa0, 0x7f, ZC3XX_R093_I2CSETVALUE},
-	{0xa0, 0x00, ZC3XX_R094_I2CWRITEACK},
-	{0xa0, 0x01, ZC3XX_R090_I2CCOMMAND},
-	{0xa0, 0x2e, ZC3XX_R092_I2CADDRESSSELECT},
-	{0xa0, 0x7f, ZC3XX_R093_I2CSETVALUE},
-	{0xa0, 0x00, ZC3XX_R094_I2CWRITEACK},
-	{0xa0, 0x01, ZC3XX_R090_I2CCOMMAND},
-	{0xa0, 0x10, ZC3XX_R087_EXPTIMEMID},
-	{0xa0, 0xb7, ZC3XX_R101_SENSORCORRECTION},
-	{0xa0, 0x05, ZC3XX_R012_VIDEOCONTROLFUNC},
-	{0xa0, 0x0d, ZC3XX_R100_OPERATIONMODE},
-	{0xa0, 0x06, ZC3XX_R189_AWBSTATUS},
-	{0xa0, 0x09, 0x01ad},
-	{0xa0, 0x03, ZC3XX_R1C5_SHARPNESSMODE},
-	{0xa0, 0x13, ZC3XX_R1CB_SHARPNESS05},
-	{0xa0, 0x08, ZC3XX_R250_DEADPIXELSMODE},
-	{0xa0, 0x08, ZC3XX_R301_EEPROMACCESS},
-	{0xa0, 0x60, ZC3XX_R1A8_DIGITALGAIN},
-	{0xa0, 0x6c, ZC3XX_R18D_YTARGET},
-	{0xa0, 0x61, ZC3XX_R116_RGAIN},
-	{0xa0, 0x65, ZC3XX_R118_BGAIN},
-	{0xa0, 0x09, 0x01ad},
-	{0xa0, 0x15, 0x01ae},
-	{0xa0, 0x4c, ZC3XX_R10A_RGB00},	/* matrix */
-	{0xa0, 0xf1, ZC3XX_R10B_RGB01},
-	{0xa0, 0x03, ZC3XX_R10C_RGB02},
-	{0xa0, 0xfe, ZC3XX_R10D_RGB10},
-	{0xa0, 0x51, ZC3XX_R10E_RGB11},
-	{0xa0, 0xf1, ZC3XX_R10F_RGB12},
-	{0xa0, 0xec, ZC3XX_R110_RGB20},
-	{0xa0, 0x03, ZC3XX_R111_RGB21},
-	{0xa0, 0x51, ZC3XX_R112_RGB22},
-	{0xa0, 0x03, ZC3XX_R008_CLOCKSETTING},
-	{0xa0, 0x08, ZC3XX_R1C6_SHARPNESS00},	/* sharpness+ */
-	{0xa0, 0x0f, ZC3XX_R1CB_SHARPNESS05},	/* sharpness- */
-	{0xa0, 0x38, ZC3XX_R120_GAMMA00},	/* gamma > 5 */
-	{0xa0, 0x51, ZC3XX_R121_GAMMA01},
-	{0xa0, 0x6e, ZC3XX_R122_GAMMA02},
-	{0xa0, 0x8c, ZC3XX_R123_GAMMA03},
-	{0xa0, 0xa2, ZC3XX_R124_GAMMA04},
-	{0xa0, 0xb6, ZC3XX_R125_GAMMA05},
-	{0xa0, 0xc8, ZC3XX_R126_GAMMA06},
-	{0xa0, 0xd6, ZC3XX_R127_GAMMA07},
-	{0xa0, 0xe2, ZC3XX_R128_GAMMA08},
-	{0xa0, 0xed, ZC3XX_R129_GAMMA09},
-	{0xa0, 0xf5, ZC3XX_R12A_GAMMA0A},
-	{0xa0, 0xfc, ZC3XX_R12B_GAMMA0B},
-	{0xa0, 0xff, ZC3XX_R12C_GAMMA0C},
-	{0xa0, 0xff, ZC3XX_R12D_GAMMA0D},
-	{0xa0, 0xff, ZC3XX_R12E_GAMMA0E},
-	{0xa0, 0xff, ZC3XX_R12F_GAMMA0F},
-	{0xa0, 0x12, ZC3XX_R130_GAMMA10},
-	{0xa0, 0x1b, ZC3XX_R131_GAMMA11},
-	{0xa0, 0x1d, ZC3XX_R132_GAMMA12},
-	{0xa0, 0x1a, ZC3XX_R133_GAMMA13},
-	{0xa0, 0x15, ZC3XX_R134_GAMMA14},
-	{0xa0, 0x12, ZC3XX_R135_GAMMA15},
-	{0xa0, 0x0f, ZC3XX_R136_GAMMA16},
-	{0xa0, 0x0d, ZC3XX_R137_GAMMA17},
-	{0xa0, 0x0b, ZC3XX_R138_GAMMA18},
-	{0xa0, 0x09, ZC3XX_R139_GAMMA19},
-	{0xa0, 0x07, ZC3XX_R13A_GAMMA1A},
-	{0xa0, 0x05, ZC3XX_R13B_GAMMA1B},
-	{0xa0, 0x00, ZC3XX_R13C_GAMMA1C},
-	{0xa0, 0x00, ZC3XX_R13D_GAMMA1D},
-	{0xa0, 0x00, ZC3XX_R13E_GAMMA1E},
-	{0xa0, 0x01, ZC3XX_R13F_GAMMA1F},
-	{0xa0, 0x4c, ZC3XX_R10A_RGB00},	/* matrix */
-	{0xa0, 0xf1, ZC3XX_R10B_RGB01},
-	{0xa0, 0x03, ZC3XX_R10C_RGB02},
-	{0xa0, 0xfe, ZC3XX_R10D_RGB10},
-	{0xa0, 0x51, ZC3XX_R10E_RGB11},
-	{0xa0, 0xf1, ZC3XX_R10F_RGB12},
-	{0xa0, 0xec, ZC3XX_R110_RGB20},
-	{0xa0, 0x03, ZC3XX_R111_RGB21},
-	{0xa0, 0x51, ZC3XX_R112_RGB22},
-	{0xa0, 0x10, ZC3XX_R180_AUTOCORRECTENABLE},
-	{0xa0, 0x00, ZC3XX_R180_AUTOCORRECTENABLE},
-	{0xa0, 0x00, ZC3XX_R019_AUTOADJUSTFPS},
-	{0xa0, 0x05, ZC3XX_R092_I2CADDRESSSELECT},
-	{0xa0, 0x09, ZC3XX_R093_I2CSETVALUE},
-	{0xa0, 0x00, ZC3XX_R094_I2CWRITEACK},
-	{0xa0, 0x01, ZC3XX_R090_I2CCOMMAND},
-	{0xa0, 0x09, ZC3XX_R092_I2CADDRESSSELECT},
-	{0xa0, 0x34, ZC3XX_R093_I2CSETVALUE},
-	{0xa0, 0x01, ZC3XX_R094_I2CWRITEACK},
-	{0xa0, 0x01, ZC3XX_R090_I2CCOMMAND},
-	{0xa0, 0x00, ZC3XX_R190_EXPOSURELIMITHIGH},
-	{0xa0, 0x07, ZC3XX_R191_EXPOSURELIMITMID},
-	{0xa0, 0xd2, ZC3XX_R192_EXPOSURELIMITLOW},
-	{0xa0, 0x00, ZC3XX_R195_ANTIFLICKERHIGH},
-	{0xa0, 0x00, ZC3XX_R196_ANTIFLICKERMID},
-	{0xa0, 0x9a, ZC3XX_R197_ANTIFLICKERLOW},
-	{0xa0, 0x0e, ZC3XX_R18C_AEFREEZE},
-	{0xa0, 0x1c, ZC3XX_R18F_AEUNFREEZE},
-	{0xa0, 0x14, ZC3XX_R1A9_DIGITALLIMITDIFF},
-	{0xa0, 0x66, ZC3XX_R1AA_DIGITALGAINSTEP},
-	{0xa0, 0xd7, ZC3XX_R01D_HSYNC_0},
-	{0xa0, 0xf4, ZC3XX_R01E_HSYNC_1},
-	{0xa0, 0xf9, ZC3XX_R01F_HSYNC_2},
-	{0xa0, 0xff, ZC3XX_R020_HSYNC_3},
-	{0xa0, 0x42, ZC3XX_R180_AUTOCORRECTENABLE},
-	{0xa0, 0x09, 0x01ad},
-	{0xa0, 0x15, 0x01ae},
-	{0xa0, 0x40, ZC3XX_R180_AUTOCORRECTENABLE},
-	{0xa0, 0x42, ZC3XX_R180_AUTOCORRECTENABLE},
+	{0xaa, 0x6b, 0x00a0}, /* 00,6b,a0,aa */
+	{0xaa, 0x6c, 0x0054}, /* 00,6c,54,aa */
+	{0xaa, 0xd6, 0x0007}, /* 00,d6,07,aa */
+	{0xa0, 0xf7, ZC3XX_R101_SENSORCORRECTION}, /* 01,01,f7,cc */
+	{0xa0, 0x05, ZC3XX_R012_VIDEOCONTROLFUNC}, /* 00,12,05,cc */
+	{0xa0, 0x0d, ZC3XX_R100_OPERATIONMODE}, /* 01,00,0d,cc */
+	{0xa0, 0x06, ZC3XX_R189_AWBSTATUS}, /* 01,89,06,cc */
+	{0xa0, 0x00, 0x01ad}, /* 01,ad,00,cc */
+	{0xa0, 0x03, ZC3XX_R1C5_SHARPNESSMODE}, /* 01,c5,03,cc */
+	{0xa0, 0x13, ZC3XX_R1CB_SHARPNESS05}, /* 01,cb,13,cc */
+	{0xa0, 0x08, ZC3XX_R250_DEADPIXELSMODE}, /* 02,50,08,cc */
+	{0xa0, 0x08, ZC3XX_R301_EEPROMACCESS}, /* 03,01,08,cc */
+	{0xa0, 0x7a, ZC3XX_R116_RGAIN}, /* 01,16,7a,cc */
+	{0xa0, 0x4a, ZC3XX_R118_BGAIN}, /* 01,18,4a,cc */
 	{}
 };
 
-static const struct usb_action tas5130cK_Initial[] = {
-	{0xa0, 0x01, ZC3XX_R000_SYSTEMCONTROL},
-	{0xa0, 0x01, 0x003b},
-	{0xa0, 0x0e, 0x003a},
-	{0xa0, 0x01, 0x0038},
-	{0xa0, 0x0b, 0x0039},
-	{0xa0, 0x00, 0x0038},
-	{0xa0, 0x0b, 0x0039},
-	{0xa0, 0x01, ZC3XX_R000_SYSTEMCONTROL},
-	{0xa0, 0x03, ZC3XX_R008_CLOCKSETTING},
-	{0xa0, 0x0a, ZC3XX_R010_CMOSSENSORSELECT},
-	{0xa0, 0x00, ZC3XX_R002_CLOCKSELECT},
-	{0xa0, 0x02, ZC3XX_R003_FRAMEWIDTHHIGH},
-	{0xa0, 0x80, ZC3XX_R004_FRAMEWIDTHLOW},
-	{0xa0, 0x01, ZC3XX_R005_FRAMEHEIGHTHIGH},
-	{0xa0, 0xe0, ZC3XX_R006_FRAMEHEIGHTLOW},
-	{0xa0, 0xdc, ZC3XX_R08B_I2CDEVICEADDR},
-	{0xa0, 0x01, ZC3XX_R001_SYSTEMOPERATING},
-	{0xa0, 0x07, ZC3XX_R012_VIDEOCONTROLFUNC},
-	{0xa0, 0x00, ZC3XX_R098_WINYSTARTLOW},
-	{0xa0, 0x00, ZC3XX_R09A_WINXSTARTLOW},
-	{0xa0, 0x00, ZC3XX_R11A_FIRSTYLOW},
-	{0xa0, 0x00, ZC3XX_R11C_FIRSTXLOW},
-	{0xa0, 0xdc, ZC3XX_R08B_I2CDEVICEADDR},
-	{0xa0, 0x05, ZC3XX_R012_VIDEOCONTROLFUNC},
-	{0xa0, 0x01, ZC3XX_R092_I2CADDRESSSELECT},
-	{0xa0, 0x01, ZC3XX_R093_I2CSETVALUE},
-	{0xa0, 0x00, ZC3XX_R094_I2CWRITEACK},
-	{0xa0, 0x01, ZC3XX_R090_I2CCOMMAND},
-	{0xa0, 0x06, ZC3XX_R092_I2CADDRESSSELECT},
-	{0xa0, 0x00, ZC3XX_R093_I2CSETVALUE},
-	{0xa0, 0x00, ZC3XX_R094_I2CWRITEACK},
-	{0xa0, 0x01, ZC3XX_R090_I2CCOMMAND},
-	{0xa0, 0x08, ZC3XX_R092_I2CADDRESSSELECT},
-	{0xa0, 0x83, ZC3XX_R093_I2CSETVALUE},
-	{0xa0, 0x04, ZC3XX_R094_I2CWRITEACK},
-	{0xa0, 0x01, ZC3XX_R090_I2CCOMMAND},
-	{0xa0, 0x01, ZC3XX_R092_I2CADDRESSSELECT},
-	{0xa0, 0x04, ZC3XX_R093_I2CSETVALUE},
-	{0xa0, 0x00, ZC3XX_R094_I2CWRITEACK},
-	{0xa0, 0x01, ZC3XX_R090_I2CCOMMAND},
-	{0xa0, 0x08, ZC3XX_R092_I2CADDRESSSELECT},
-	{0xa0, 0x06, ZC3XX_R093_I2CSETVALUE},
-	{0xa0, 0x00, ZC3XX_R094_I2CWRITEACK},
-	{0xa0, 0x01, ZC3XX_R090_I2CCOMMAND},
-	{0xa0, 0x02, ZC3XX_R092_I2CADDRESSSELECT},
-	{0xa0, 0x11, ZC3XX_R093_I2CSETVALUE},
-	{0xa0, 0x00, ZC3XX_R094_I2CWRITEACK},
-	{0xa0, 0x01, ZC3XX_R090_I2CCOMMAND},
-	{0xa0, 0x03, ZC3XX_R092_I2CADDRESSSELECT},
-	{0xa0, 0xe5, ZC3XX_R093_I2CSETVALUE},
-	{0xa0, 0x01, ZC3XX_R094_I2CWRITEACK},
-	{0xa0, 0x01, ZC3XX_R090_I2CCOMMAND},
-	{0xa0, 0x04, ZC3XX_R092_I2CADDRESSSELECT},
-	{0xa0, 0x85, ZC3XX_R093_I2CSETVALUE},
-	{0xa0, 0x02, ZC3XX_R094_I2CWRITEACK},
-	{0xa0, 0x01, ZC3XX_R090_I2CCOMMAND},
-	{0xa0, 0x07, ZC3XX_R092_I2CADDRESSSELECT},
-	{0xa0, 0x02, ZC3XX_R093_I2CSETVALUE},
-	{0xa0, 0x30, ZC3XX_R094_I2CWRITEACK},
-	{0xa0, 0x01, ZC3XX_R090_I2CCOMMAND},
-	{0xa0, 0x20, ZC3XX_R092_I2CADDRESSSELECT},
-	{0xa0, 0x00, ZC3XX_R093_I2CSETVALUE},
-	{0xa0, 0x51, ZC3XX_R094_I2CWRITEACK},
-	{0xa0, 0x01, ZC3XX_R090_I2CCOMMAND},
-	{0xa0, 0x35, ZC3XX_R092_I2CADDRESSSELECT},
-	{0xa0, 0x7F, ZC3XX_R093_I2CSETVALUE},
-	{0xa0, 0x50, ZC3XX_R094_I2CWRITEACK},
-	{0xa0, 0x01, ZC3XX_R090_I2CCOMMAND},
-	{0xa0, 0x30, ZC3XX_R092_I2CADDRESSSELECT},
-	{0xa0, 0x05, ZC3XX_R093_I2CSETVALUE},
-	{0xa0, 0x00, ZC3XX_R094_I2CWRITEACK},
-	{0xa0, 0x01, ZC3XX_R090_I2CCOMMAND},
-	{0xa0, 0x31, ZC3XX_R092_I2CADDRESSSELECT},
-	{0xa0, 0x00, ZC3XX_R093_I2CSETVALUE},
-	{0xa0, 0x00, ZC3XX_R094_I2CWRITEACK},
-	{0xa0, 0x01, ZC3XX_R090_I2CCOMMAND},
-	{0xa0, 0x58, ZC3XX_R092_I2CADDRESSSELECT},
-	{0xa0, 0x78, ZC3XX_R093_I2CSETVALUE},
-	{0xa0, 0x00, ZC3XX_R094_I2CWRITEACK},
-	{0xa0, 0x01, ZC3XX_R090_I2CCOMMAND},
-	{0xa0, 0x62, ZC3XX_R092_I2CADDRESSSELECT},
-	{0xa0, 0x11, ZC3XX_R093_I2CSETVALUE},
-	{0xa0, 0x04, ZC3XX_R094_I2CWRITEACK},
-	{0xa0, 0x01, ZC3XX_R090_I2CCOMMAND},
-	{0xa0, 0x2B, ZC3XX_R092_I2CADDRESSSELECT},
-	{0xa0, 0x7f, ZC3XX_R093_I2CSETVALUE},
-	{0xa0, 0x00, ZC3XX_R094_I2CWRITEACK},
-	{0xa0, 0x01, ZC3XX_R090_I2CCOMMAND},
-	{0xa0, 0x2C, ZC3XX_R092_I2CADDRESSSELECT},
-	{0xa0, 0x7F, ZC3XX_R093_I2CSETVALUE},
-	{0xa0, 0x00, ZC3XX_R094_I2CWRITEACK},
-	{0xa0, 0x01, ZC3XX_R090_I2CCOMMAND},
-	{0xa0, 0x2D, ZC3XX_R092_I2CADDRESSSELECT},
-	{0xa0, 0x7f, ZC3XX_R093_I2CSETVALUE},
-	{0xa0, 0x00, ZC3XX_R094_I2CWRITEACK},
-	{0xa0, 0x01, ZC3XX_R090_I2CCOMMAND},
-	{0xa0, 0x2e, ZC3XX_R092_I2CADDRESSSELECT},
-	{0xa0, 0x7f, ZC3XX_R093_I2CSETVALUE},
-	{0xa0, 0x00, ZC3XX_R094_I2CWRITEACK},
-	{0xa0, 0x01, ZC3XX_R090_I2CCOMMAND},
-	{0xa0, 0x10, ZC3XX_R087_EXPTIMEMID},
-	{0xa0, 0xb7, ZC3XX_R101_SENSORCORRECTION},
-	{0xa0, 0x05, ZC3XX_R012_VIDEOCONTROLFUNC},
-	{0xa0, 0x0d, ZC3XX_R100_OPERATIONMODE},
-	{0xa0, 0x06, ZC3XX_R189_AWBSTATUS},
-	{0xa0, 0x09, 0x01ad},
-	{0xa0, 0x03, ZC3XX_R1C5_SHARPNESSMODE},
-	{0xa0, 0x13, ZC3XX_R1CB_SHARPNESS05},
-	{0xa0, 0x08, ZC3XX_R250_DEADPIXELSMODE},
-	{0xa0, 0x08, ZC3XX_R301_EEPROMACCESS},
-	{0xa0, 0x60, ZC3XX_R1A8_DIGITALGAIN},
-	{0xa0, 0x6c, ZC3XX_R18D_YTARGET},
-	{0xa0, 0x61, ZC3XX_R116_RGAIN},
-	{0xa0, 0x65, ZC3XX_R118_BGAIN},
-	{0xa0, 0x09, 0x01ad},
-	{0xa0, 0x15, 0x01ae},
-	{0xa0, 0x4c, ZC3XX_R10A_RGB00},	/* matrix */
-	{0xa0, 0xf1, ZC3XX_R10B_RGB01},
-	{0xa0, 0x03, ZC3XX_R10C_RGB02},
-	{0xa0, 0xfe, ZC3XX_R10D_RGB10},
-	{0xa0, 0x51, ZC3XX_R10E_RGB11},
-	{0xa0, 0xf1, ZC3XX_R10F_RGB12},
-	{0xa0, 0xec, ZC3XX_R110_RGB20},
-	{0xa0, 0x03, ZC3XX_R111_RGB21},
-	{0xa0, 0x51, ZC3XX_R112_RGB22},
-	{0xa0, 0x03, ZC3XX_R008_CLOCKSETTING},
-	{0xa0, 0x08, ZC3XX_R1C6_SHARPNESS00},	/* sharpness+ */
-	{0xa0, 0x0f, ZC3XX_R1CB_SHARPNESS05},	/* sharpness- */
-	{0xa0, 0x38, ZC3XX_R120_GAMMA00},	/* gamma > 5 */
-	{0xa0, 0x51, ZC3XX_R121_GAMMA01},
-	{0xa0, 0x6e, ZC3XX_R122_GAMMA02},
-	{0xa0, 0x8c, ZC3XX_R123_GAMMA03},
-	{0xa0, 0xa2, ZC3XX_R124_GAMMA04},
-	{0xa0, 0xb6, ZC3XX_R125_GAMMA05},
-	{0xa0, 0xc8, ZC3XX_R126_GAMMA06},
-	{0xa0, 0xd6, ZC3XX_R127_GAMMA07},
-	{0xa0, 0xe2, ZC3XX_R128_GAMMA08},
-	{0xa0, 0xed, ZC3XX_R129_GAMMA09},
-	{0xa0, 0xf5, ZC3XX_R12A_GAMMA0A},
-	{0xa0, 0xfc, ZC3XX_R12B_GAMMA0B},
-	{0xa0, 0xff, ZC3XX_R12C_GAMMA0C},
-	{0xa0, 0xff, ZC3XX_R12D_GAMMA0D},
-	{0xa0, 0xff, ZC3XX_R12E_GAMMA0E},
-	{0xa0, 0xff, ZC3XX_R12F_GAMMA0F},
-	{0xa0, 0x12, ZC3XX_R130_GAMMA10},
-	{0xa0, 0x1b, ZC3XX_R131_GAMMA11},
-	{0xa0, 0x1d, ZC3XX_R132_GAMMA12},
-	{0xa0, 0x1a, ZC3XX_R133_GAMMA13},
-	{0xa0, 0x15, ZC3XX_R134_GAMMA14},
-	{0xa0, 0x12, ZC3XX_R135_GAMMA15},
-	{0xa0, 0x0f, ZC3XX_R136_GAMMA16},
-	{0xa0, 0x0d, ZC3XX_R137_GAMMA17},
-	{0xa0, 0x0b, ZC3XX_R138_GAMMA18},
-	{0xa0, 0x09, ZC3XX_R139_GAMMA19},
-	{0xa0, 0x07, ZC3XX_R13A_GAMMA1A},
-	{0xa0, 0x05, ZC3XX_R13B_GAMMA1B},
-	{0xa0, 0x00, ZC3XX_R13C_GAMMA1C},
-	{0xa0, 0x00, ZC3XX_R13D_GAMMA1D},
-	{0xa0, 0x00, ZC3XX_R13E_GAMMA1E},
-	{0xa0, 0x01, ZC3XX_R13F_GAMMA1F},
-	{0xa0, 0x4c, ZC3XX_R10A_RGB00},	/* matrix */
-	{0xa0, 0xf1, ZC3XX_R10B_RGB01},
-	{0xa0, 0x03, ZC3XX_R10C_RGB02},
-	{0xa0, 0xfe, ZC3XX_R10D_RGB10},
-	{0xa0, 0x51, ZC3XX_R10E_RGB11},
-	{0xa0, 0xf1, ZC3XX_R10F_RGB12},
-	{0xa0, 0xec, ZC3XX_R110_RGB20},
-	{0xa0, 0x03, ZC3XX_R111_RGB21},
-	{0xa0, 0x51, ZC3XX_R112_RGB22},
-	{0xa0, 0x10, ZC3XX_R180_AUTOCORRECTENABLE},
-	{0xa0, 0x00, ZC3XX_R180_AUTOCORRECTENABLE},
-	{0xa0, 0x00, ZC3XX_R019_AUTOADJUSTFPS},
-	{0xa0, 0x05, ZC3XX_R092_I2CADDRESSSELECT},
-	{0xa0, 0x62, ZC3XX_R093_I2CSETVALUE},
-	{0xa0, 0x00, ZC3XX_R094_I2CWRITEACK},
-	{0xa0, 0x01, ZC3XX_R090_I2CCOMMAND},
-	{0xa0, 0x09, ZC3XX_R092_I2CADDRESSSELECT},
-	{0xa0, 0xaa, ZC3XX_R093_I2CSETVALUE},
-	{0xa0, 0x01, ZC3XX_R094_I2CWRITEACK},
-	{0xa0, 0x01, ZC3XX_R090_I2CCOMMAND},
-	{0xa0, 0x00, ZC3XX_R190_EXPOSURELIMITHIGH},
-	{0xa0, 0x03, ZC3XX_R191_EXPOSURELIMITMID},
-	{0xa0, 0x9b, ZC3XX_R192_EXPOSURELIMITLOW},
-	{0xa0, 0x00, ZC3XX_R195_ANTIFLICKERHIGH},
-	{0xa0, 0x00, ZC3XX_R196_ANTIFLICKERMID},
-	{0xa0, 0x47, ZC3XX_R197_ANTIFLICKERLOW},
-	{0xa0, 0x0e, ZC3XX_R18C_AEFREEZE},
-	{0xa0, 0x1c, ZC3XX_R18F_AEUNFREEZE},
-	{0xa0, 0x14, ZC3XX_R1A9_DIGITALLIMITDIFF},
-	{0xa0, 0x66, ZC3XX_R1AA_DIGITALGAINSTEP},
-	{0xa0, 0x62, ZC3XX_R01D_HSYNC_0},
-	{0xa0, 0x90, ZC3XX_R01E_HSYNC_1},
-	{0xa0, 0xc8, ZC3XX_R01F_HSYNC_2},
-	{0xa0, 0xff, ZC3XX_R020_HSYNC_3},
-	{0xa0, 0x60, ZC3XX_R11D_GLOBALGAIN},
-	{0xa0, 0x42, ZC3XX_R180_AUTOCORRECTENABLE},
-	{0xa0, 0x09, 0x01ad},
-	{0xa0, 0x15, 0x01ae},
-	{0xa0, 0x40, ZC3XX_R180_AUTOCORRECTENABLE},
-	{0xa0, 0x42, ZC3XX_R180_AUTOCORRECTENABLE},
-	{0xa0, 0x30, 0x0007},
-	{0xa0, 0x02, ZC3XX_R008_CLOCKSETTING},
-	{0xa0, 0x00, 0x0007},
-	{0xa0, 0x03, ZC3XX_R008_CLOCKSETTING},
+static const struct usb_action po2030_50HZ[] = {
+	{0xaa, 0x8d, 0x0008}, /* 00,8d,08,aa */
+	{0xaa, 0x1a, 0x0001}, /* 00,1a,01,aa */
+	{0xaa, 0x1b, 0x000a}, /* 00,1b,0a,aa */
+	{0xaa, 0x1c, 0x00b0}, /* 00,1c,b0,aa */
+	{0xa0, 0x05, ZC3XX_R190_EXPOSURELIMITHIGH}, /* 01,90,05,cc */
+	{0xa0, 0x35, ZC3XX_R191_EXPOSURELIMITMID}, /* 01,91,35,cc */
+	{0xa0, 0x70, ZC3XX_R192_EXPOSURELIMITLOW}, /* 01,92,70,cc */
+	{0xa0, 0x00, ZC3XX_R195_ANTIFLICKERHIGH}, /* 01,95,00,cc */
+	{0xa0, 0x85, ZC3XX_R196_ANTIFLICKERMID}, /* 01,96,85,cc */
+	{0xa0, 0x58, ZC3XX_R197_ANTIFLICKERLOW}, /* 01,97,58,cc */
+	{0xa0, 0x0c, ZC3XX_R18C_AEFREEZE}, /* 01,8c,0c,cc */
+	{0xa0, 0x18, ZC3XX_R18F_AEUNFREEZE}, /* 01,8f,18,cc */
+	{0xa0, 0x60, ZC3XX_R1A8_DIGITALGAIN}, /* 01,a8,60,cc */
+	{0xa0, 0x10, ZC3XX_R1A9_DIGITALLIMITDIFF}, /* 01,a9,10,cc */
+	{0xa0, 0x22, ZC3XX_R1AA_DIGITALGAINSTEP}, /* 01,aa,22,cc */
+	{0xa0, 0x88, ZC3XX_R18D_YTARGET}, /* 01,8d,88,cc */
+	{0xa0, 0x58, ZC3XX_R11D_GLOBALGAIN}, /* 01,1d,58,cc */
+	{0xa0, 0x42, ZC3XX_R180_AUTOCORRECTENABLE}, /* 01,80,42,cc */
+	{}
+};
+
+static const struct usb_action po2030_60HZ[] = {
+	{0xaa, 0x8d, 0x0008}, /* 00,8d,08,aa */
+	{0xaa, 0x1a, 0x0000}, /* 00,1a,00,aa */
+	{0xaa, 0x1b, 0x00de}, /* 00,1b,de,aa */
+	{0xaa, 0x1c, 0x0040}, /* 00,1c,40,aa */
+	{0xa0, 0x08, ZC3XX_R190_EXPOSURELIMITHIGH}, /* 01,90,08,cc */
+	{0xa0, 0xae, ZC3XX_R191_EXPOSURELIMITMID}, /* 01,91,ae,cc */
+	{0xa0, 0x80, ZC3XX_R192_EXPOSURELIMITLOW}, /* 01,92,80,cc */
+	{0xa0, 0x00, ZC3XX_R195_ANTIFLICKERHIGH}, /* 01,95,00,cc */
+	{0xa0, 0x6f, ZC3XX_R196_ANTIFLICKERMID}, /* 01,96,6f,cc */
+	{0xa0, 0x20, ZC3XX_R197_ANTIFLICKERLOW}, /* 01,97,20,cc */
+	{0xa0, 0x0c, ZC3XX_R18C_AEFREEZE}, /* 01,8c,0c,cc */
+	{0xa0, 0x18, ZC3XX_R18F_AEUNFREEZE}, /* 01,8f,18,cc */
+	{0xa0, 0x60, ZC3XX_R1A8_DIGITALGAIN}, /* 01,a8,60,cc */
+	{0xa0, 0x10, ZC3XX_R1A9_DIGITALLIMITDIFF}, /* 01,a9,10,cc */
+	{0xa0, 0x22, ZC3XX_R1AA_DIGITALGAINSTEP},	/* 01,aa,22,cc */
+	{0xa0, 0x88, ZC3XX_R18D_YTARGET},		/* 01,8d,88,cc */
+							/* win: 01,8d,80 */
+	{0xa0, 0x58, ZC3XX_R11D_GLOBALGAIN},		/* 01,1d,58,cc */
+	{0xa0, 0x42, ZC3XX_R180_AUTOCORRECTENABLE},	/* 01,80,42,cc */
+	{}
+};
+
+static const struct usb_action po2030_NoFliker[] = {
+	{0xa0, 0x02, ZC3XX_R180_AUTOCORRECTENABLE}, /* 01,80,02,cc */
+	{0xaa, 0x8d, 0x000d}, /* 00,8d,0d,aa */
+	{0xaa, 0x1a, 0x0000}, /* 00,1a,00,aa */
+	{0xaa, 0x1b, 0x0002}, /* 00,1b,02,aa */
+	{0xaa, 0x1c, 0x0078}, /* 00,1c,78,aa */
+	{0xaa, 0x46, 0x0000}, /* 00,46,00,aa */
+	{0xaa, 0x15, 0x0000}, /* 00,15,00,aa */
 	{}
 };
 
-static const struct usb_action tas5130cxx_InitialScale[] = {	/* 320x240 */
+static const struct usb_action tas5130c_InitialScale[] = {	/* 320x240 */
 	{0xa0, 0x01, ZC3XX_R000_SYSTEMCONTROL},
 	{0xa0, 0x50, ZC3XX_R002_CLOCKSELECT},
 	{0xa0, 0x03, ZC3XX_R008_CLOCKSETTING},
@@ -5377,7 +5223,7 @@ static const struct usb_action tas5130cxx_InitialScale[] = {	/* 320x240 */
 	{0xa0, 0x02, ZC3XX_R0A6_EXPOSUREBLACKLVL},
 	{}
 };
-static const struct usb_action tas5130cxx_Initial[] = {	/* 640x480 */
+static const struct usb_action tas5130c_Initial[] = {	/* 640x480 */
 	{0xa0, 0x01, ZC3XX_R000_SYSTEMCONTROL},
 	{0xa0, 0x40, ZC3XX_R002_CLOCKSELECT},
 	{0xa0, 0x00, ZC3XX_R008_CLOCKSETTING},
@@ -5413,7 +5259,7 @@ static const struct usb_action tas5130cxx_Initial[] = {	/* 640x480 */
 	{0xa0, 0x02, ZC3XX_R0A6_EXPOSUREBLACKLVL},
 	{}
 };
-static const struct usb_action tas5130cxx_50HZ[] = {
+static const struct usb_action tas5130c_50HZ[] = {
 	{0xa0, 0x00, ZC3XX_R019_AUTOADJUSTFPS}, /* 00,19,00,cc */
 	{0xaa, 0xa3, 0x0001}, /* 00,a3,01,aa */
 	{0xaa, 0xa4, 0x0063}, /* 00,a4,63,aa */
@@ -5438,7 +5284,7 @@ static const struct usb_action tas5130cxx_50HZ[] = {
 	{0xa0, 0x50, ZC3XX_R11D_GLOBALGAIN},
 	{}
 };
-static const struct usb_action tas5130cxx_50HZScale[] = {
+static const struct usb_action tas5130c_50HZScale[] = {
 	{0xa0, 0x00, ZC3XX_R019_AUTOADJUSTFPS}, /* 00,19,00,cc */
 	{0xaa, 0xa3, 0x0001}, /* 00,a3,01,aa */
 	{0xaa, 0xa4, 0x0077}, /* 00,a4,77,aa */
@@ -5463,7 +5309,7 @@ static const struct usb_action tas5130cxx_50HZScale[] = {
 	{0xa0, 0x50, ZC3XX_R11D_GLOBALGAIN},
 	{}
 };
-static const struct usb_action tas5130cxx_60HZ[] = {
+static const struct usb_action tas5130c_60HZ[] = {
 	{0xa0, 0x00, ZC3XX_R019_AUTOADJUSTFPS}, /* 00,19,00,cc */
 	{0xaa, 0xa3, 0x0001}, /* 00,a3,01,aa */
 	{0xaa, 0xa4, 0x0036}, /* 00,a4,36,aa */
@@ -5488,7 +5334,7 @@ static const struct usb_action tas5130cxx_60HZ[] = {
 	{0xa0, 0x50, ZC3XX_R11D_GLOBALGAIN},
 	{}
 };
-static const struct usb_action tas5130cxx_60HZScale[] = {
+static const struct usb_action tas5130c_60HZScale[] = {
 	{0xa0, 0x00, ZC3XX_R019_AUTOADJUSTFPS}, /* 00,19,00,cc */
 	{0xaa, 0xa3, 0x0001}, /* 00,a3,01,aa */
 	{0xaa, 0xa4, 0x0077}, /* 00,a4,77,aa */
@@ -5513,7 +5359,7 @@ static const struct usb_action tas5130cxx_60HZScale[] = {
 	{0xa0, 0x50, ZC3XX_R11D_GLOBALGAIN},
 	{}
 };
-static const struct usb_action tas5130cxx_NoFliker[] = {
+static const struct usb_action tas5130c_NoFliker[] = {
 	{0xa0, 0x00, ZC3XX_R019_AUTOADJUSTFPS}, /* 00,19,00,cc */
 	{0xaa, 0xa3, 0x0001}, /* 00,a3,01,aa */
 	{0xaa, 0xa4, 0x0040}, /* 00,a4,40,aa */
@@ -5539,7 +5385,7 @@ static const struct usb_action tas5130cxx_NoFliker[] = {
 	{}
 };
 
-static const struct usb_action tas5130cxx_NoFlikerScale[] = {
+static const struct usb_action tas5130c_NoFlikerScale[] = {
 	{0xa0, 0x00, ZC3XX_R019_AUTOADJUSTFPS}, /* 00,19,00,cc */
 	{0xaa, 0xa3, 0x0001}, /* 00,a3,01,aa */
 	{0xaa, 0xa4, 0x0090}, /* 00,a4,90,aa */
@@ -5840,13 +5686,22 @@ static const struct usb_action tas5130c_vf0250_NoFliker[] = {
 static u8 reg_r_i(struct gspca_dev *gspca_dev,
 		u16 index)
 {
-	usb_control_msg(gspca_dev->dev,
+	int ret;
+
+	if (gspca_dev->usb_err < 0)
+		return 0;
+	ret = usb_control_msg(gspca_dev->dev,
 			usb_rcvctrlpipe(gspca_dev->dev, 0),
 			0xa1,
 			USB_DIR_IN | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
 			0x01,			/* value */
 			index, gspca_dev->usb_buf, 1,
 			500);
+	if (ret < 0) {
+		PDEBUG(D_ERR, "reg_r_i err %d", ret);
+		gspca_dev->usb_err = ret;
+		return 0;
+	}
 	return gspca_dev->usb_buf[0];
 }
 
@@ -5860,24 +5715,32 @@ static u8 reg_r(struct gspca_dev *gspca_dev,
 	return ret;
 }
 
-static void reg_w_i(struct usb_device *dev,
+static void reg_w_i(struct gspca_dev *gspca_dev,
 			u8 value,
 			u16 index)
 {
-	usb_control_msg(dev,
-			usb_sndctrlpipe(dev, 0),
+	int ret;
+
+	if (gspca_dev->usb_err < 0)
+		return;
+	ret = usb_control_msg(gspca_dev->dev,
+			usb_sndctrlpipe(gspca_dev->dev, 0),
 			0xa0,
 			USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
 			value, index, NULL, 0,
 			500);
+	if (ret < 0) {
+		PDEBUG(D_ERR, "reg_w_i err %d", ret);
+		gspca_dev->usb_err = ret;
+	}
 }
 
-static void reg_w(struct usb_device *dev,
+static void reg_w(struct gspca_dev *gspca_dev,
 			u8 value,
 			u16 index)
 {
 	PDEBUG(D_USBO, "reg w [%04x] = %02x", index, value);
-	reg_w_i(dev, value, index);
+	reg_w_i(gspca_dev, value, index);
 }
 
 static u16 i2c_read(struct gspca_dev *gspca_dev,
@@ -5886,8 +5749,10 @@ static u16 i2c_read(struct gspca_dev *gspca_dev,
 	u8 retbyte;
 	u16 retval;
 
-	reg_w_i(gspca_dev->dev, reg, 0x0092);
-	reg_w_i(gspca_dev->dev, 0x02, 0x0090);		/* <- read command */
+	if (gspca_dev->usb_err < 0)
+		return 0;
+	reg_w_i(gspca_dev, reg, 0x0092);
+	reg_w_i(gspca_dev, 0x02, 0x0090);		/* <- read command */
 	msleep(20);
 	retbyte = reg_r_i(gspca_dev, 0x0091);		/* read status */
 	if (retbyte != 0x00)
@@ -5906,10 +5771,12 @@ static u8 i2c_write(struct gspca_dev *gspca_dev,
 {
 	u8 retbyte;
 
-	reg_w_i(gspca_dev->dev, reg, 0x92);
-	reg_w_i(gspca_dev->dev, valL, 0x93);
-	reg_w_i(gspca_dev->dev, valH, 0x94);
-	reg_w_i(gspca_dev->dev, 0x01, 0x90);		/* <- write command */
+	if (gspca_dev->usb_err < 0)
+		return 0;
+	reg_w_i(gspca_dev, reg, 0x92);
+	reg_w_i(gspca_dev, valL, 0x93);
+	reg_w_i(gspca_dev, valH, 0x94);
+	reg_w_i(gspca_dev, 0x01, 0x90);		/* <- write command */
 	msleep(1);
 	retbyte = reg_r_i(gspca_dev, 0x0091);		/* read status */
 	if (retbyte != 0x00)
@@ -5925,7 +5792,7 @@ static void usb_exchange(struct gspca_dev *gspca_dev,
 	while (action->req) {
 		switch (action->req) {
 		case 0xa0:	/* write register */
-			reg_w(gspca_dev->dev, action->val, action->idx);
+			reg_w(gspca_dev, action->val, action->idx);
 			break;
 		case 0xa1:	/* read status */
 			reg_r(gspca_dev, action->idx);
@@ -5974,38 +5841,37 @@ static void setmatrix(struct gspca_dev *gspca_dev)
 	static const u8 vf0250_matrix[9] =
 		{0x7b, 0xea, 0xea, 0xea, 0x7b, 0xea, 0xea, 0xea, 0x7b};
 	static const u8 *matrix_tb[SENSOR_MAX] = {
-		adcm2700_matrix, /* SENSOR_ADCM2700 0 */
-		ov7620_matrix,	/* SENSOR_CS2102 1 */
-		NULL,		/* SENSOR_CS2102K 2 */
-		gc0305_matrix,	/* SENSOR_GC0305 3 */
-		NULL,		/* SENSOR_HDCS2020b 4 */
-		NULL,		/* SENSOR_HV7131B 5 */
-		NULL,		/* SENSOR_HV7131C 6 */
-		NULL,		/* SENSOR_ICM105A 7 */
-		NULL,		/* SENSOR_MC501CB 8 */
-		gc0305_matrix,	/* SENSOR_MI0360SOC 9 */
-		ov7620_matrix,	/* SENSOR_OV7620 10 */
-		NULL,		/* SENSOR_OV7630C 11 */
-		NULL,		/* SENSOR_PAS106 12 */
-		pas202b_matrix,	/* SENSOR_PAS202B 13 */
-		gc0305_matrix,	/* SENSOR_PB0330 14 */
-		po2030_matrix,	/* SENSOR_PO2030 15 */
-		NULL,		/* SENSOR_TAS5130CK 16 */
-		tas5130c_matrix, /* SENSOR_TAS5130CXX 17 */
-		vf0250_matrix,	/* SENSOR_TAS5130C_VF0250 18 */
+		[SENSOR_ADCM2700] =	adcm2700_matrix,
+		[SENSOR_CS2102] =	ov7620_matrix,
+		[SENSOR_CS2102K] =	NULL,
+		[SENSOR_GC0305] =	gc0305_matrix,
+		[SENSOR_HDCS2020b] =	NULL,
+		[SENSOR_HV7131B] =	NULL,
+		[SENSOR_HV7131R] =	NULL,
+		[SENSOR_ICM105A] =	po2030_matrix,
+		[SENSOR_MC501CB] =	NULL,
+		[SENSOR_MT9V111_1] =	gc0305_matrix,
+		[SENSOR_MT9V111_3] =	gc0305_matrix,
+		[SENSOR_OV7620] =	ov7620_matrix,
+		[SENSOR_OV7630C] =	NULL,
+		[SENSOR_PAS106] =	NULL,
+		[SENSOR_PAS202B] =	pas202b_matrix,
+		[SENSOR_PB0330] =	gc0305_matrix,
+		[SENSOR_PO2030] =	po2030_matrix,
+		[SENSOR_TAS5130C] =	tas5130c_matrix,
+		[SENSOR_TAS5130C_VF0250] = vf0250_matrix,
 	};
 
 	matrix = matrix_tb[sd->sensor];
 	if (matrix == NULL)
 		return;		/* matrix already loaded */
 	for (i = 0; i < ARRAY_SIZE(ov7620_matrix); i++)
-		reg_w(gspca_dev->dev, matrix[i], 0x010a + i);
+		reg_w(gspca_dev, matrix[i], 0x010a + i);
 }
 
 static void setsharpness(struct gspca_dev *gspca_dev)
 {
 	struct sd *sd = (struct sd *) gspca_dev;
-	struct usb_device *dev = gspca_dev->dev;
 	int sharpness;
 	static const u8 sharpness_tb[][2] = {
 		{0x02, 0x03},
@@ -6015,17 +5881,16 @@ static void setsharpness(struct gspca_dev *gspca_dev)
 	};
 
 	sharpness = sd->sharpness;
-	reg_w(dev, sharpness_tb[sharpness][0], 0x01c6);
+	reg_w(gspca_dev, sharpness_tb[sharpness][0], 0x01c6);
 	reg_r(gspca_dev, 0x01c8);
 	reg_r(gspca_dev, 0x01c9);
 	reg_r(gspca_dev, 0x01ca);
-	reg_w(dev, sharpness_tb[sharpness][1], 0x01cb);
+	reg_w(gspca_dev, sharpness_tb[sharpness][1], 0x01cb);
 }
 
 static void setcontrast(struct gspca_dev *gspca_dev)
 {
 	struct sd *sd = (struct sd *) gspca_dev;
-	struct usb_device *dev = gspca_dev->dev;
 	const u8 *Tgamma;
 	int g, i, brightness, contrast, adj, gp1, gp2;
 	u8 gr[16];
@@ -6063,7 +5928,7 @@ static void setcontrast(struct gspca_dev *gspca_dev)
 			g = 0xff;
 		else if (g < 0)
 			g = 0;
-		reg_w(dev, g, 0x0120 + i);	/* gamma */
+		reg_w(gspca_dev, g, 0x0120 + i);	/* gamma */
 		if (contrast > 0)
 			adj--;
 		else if (contrast < 0)
@@ -6077,13 +5942,12 @@ static void setcontrast(struct gspca_dev *gspca_dev)
 	}
 	gr[15] = (0xff - gp2) / 2;
 	for (i = 0; i < 16; i++)
-		reg_w(dev, gr[i], 0x0130 + i);	/* gradient */
+		reg_w(gspca_dev, gr[i], 0x0130 + i);	/* gradient */
 }
 
 static void setquality(struct gspca_dev *gspca_dev)
 {
 	struct sd *sd = (struct sd *) gspca_dev;
-	struct usb_device *dev = gspca_dev->dev;
 	u8 frxt;
 
 	switch (sd->sensor) {
@@ -6096,9 +5960,9 @@ static void setquality(struct gspca_dev *gspca_dev)
 		return;
 	}
 /*fixme: is it really 0008 0007 0018 for all other sensors? */
-	reg_w(dev, QUANT_VAL, 0x0008);
+	reg_w(gspca_dev, QUANT_VAL, 0x0008);
 	frxt = 0x30;
-	reg_w(dev, frxt, 0x0007);
+	reg_w(gspca_dev, frxt, 0x0007);
 #if QUANT_VAL == 0 || QUANT_VAL == 1 || QUANT_VAL == 2
 	frxt = 0xff;
 #elif QUANT_VAL == 3
@@ -6108,7 +5972,7 @@ static void setquality(struct gspca_dev *gspca_dev)
 #else
 	frxt = 0x20;
 #endif
-	reg_w(dev, frxt, 0x0018);
+	reg_w(gspca_dev, frxt, 0x0018);
 }
 
 /* Matches the sensor's internal frame rate to the lighting frequency.
@@ -6116,87 +5980,86 @@ static void setquality(struct gspca_dev *gspca_dev)
  *	50Hz, for European and Asian lighting (default)
  *	60Hz, for American lighting
  *	0 = No Fliker (for outdoore usage)
- * Returns: 0 for success
  */
-static int setlightfreq(struct gspca_dev *gspca_dev)
+static void setlightfreq(struct gspca_dev *gspca_dev)
 {
 	struct sd *sd = (struct sd *) gspca_dev;
 	int i, mode;
 	const struct usb_action *zc3_freq;
 	static const struct usb_action *freq_tb[SENSOR_MAX][6] = {
-/* SENSOR_ADCM2700 0 */
+	[SENSOR_ADCM2700] =
 		{adcm2700_NoFliker, adcm2700_NoFliker,
 		 adcm2700_50HZ, adcm2700_50HZ,
 		 adcm2700_60HZ, adcm2700_60HZ},
-/* SENSOR_CS2102 1 */
+	[SENSOR_CS2102] =
 		{cs2102_NoFliker, cs2102_NoFlikerScale,
 		 cs2102_50HZ, cs2102_50HZScale,
 		 cs2102_60HZ, cs2102_60HZScale},
-/* SENSOR_CS2102K 2 */
+	[SENSOR_CS2102K] =
 		{cs2102_NoFliker, cs2102_NoFlikerScale,
 		 NULL, NULL, /* currently disabled */
 		 NULL, NULL},
-/* SENSOR_GC0305 3 */
+	[SENSOR_GC0305] =
 		{gc0305_NoFliker, gc0305_NoFliker,
 		 gc0305_50HZ, gc0305_50HZ,
 		 gc0305_60HZ, gc0305_60HZ},
-/* SENSOR_HDCS2020b 4 */
+	[SENSOR_HDCS2020b] =
 		{hdcs2020b_NoFliker, hdcs2020b_NoFliker,
 		 hdcs2020b_50HZ, hdcs2020b_50HZ,
 		 hdcs2020b_60HZ, hdcs2020b_60HZ},
-/* SENSOR_HV7131B 5 */
+	[SENSOR_HV7131B] =
 		{hv7131b_NoFliker, hv7131b_NoFlikerScale,
 		 hv7131b_50HZ, hv7131b_50HZScale,
 		 hv7131b_60HZ, hv7131b_60HZScale},
-/* SENSOR_HV7131C 6 */
-		{NULL, NULL,
-		 NULL, NULL,
-		 NULL, NULL},
-/* SENSOR_ICM105A 7 */
+	[SENSOR_HV7131R] =
+		{hv7131r_NoFliker, hv7131r_NoFlikerScale,
+		 hv7131r_50HZ, hv7131r_50HZScale,
+		 hv7131r_60HZ, hv7131r_60HZScale},
+	[SENSOR_ICM105A] =
 		{icm105a_NoFliker, icm105a_NoFlikerScale,
 		 icm105a_50HZ, icm105a_50HZScale,
 		 icm105a_60HZ, icm105a_60HZScale},
-/* SENSOR_MC501CB 8 */
+	[SENSOR_MC501CB] =
 		{mc501cb_NoFliker, mc501cb_NoFlikerScale,
 		 mc501cb_50HZ, mc501cb_50HZScale,
 		 mc501cb_60HZ, mc501cb_60HZScale},
-/* SENSOR_MI0360SOC 9 */
-		{mi360soc_AENoFliker, mi360soc_AENoFlikerScale,
-		 mi360soc_AE50HZ, mi360soc_AE50HZScale,
-		 mi360soc_AE60HZ, mi360soc_AE60HZScale},
-/* SENSOR_OV7620 10 */
+	[SENSOR_MT9V111_1] =
+		{mt9v111_1_AENoFliker, mt9v111_1_AENoFlikerScale,
+		 mt9v111_1_AE50HZ, mt9v111_1_AE50HZScale,
+		 mt9v111_1_AE60HZ, mt9v111_1_AE60HZScale},
+	[SENSOR_MT9V111_3] =
+		{mt9v111_3_AENoFliker, mt9v111_3_AENoFlikerScale,
+		 mt9v111_3_AE50HZ, mt9v111_3_AE50HZScale,
+		 mt9v111_3_AE60HZ, mt9v111_3_AE60HZScale},
+	[SENSOR_OV7620] =
 		{ov7620_NoFliker, ov7620_NoFliker,
 		 ov7620_50HZ, ov7620_50HZ,
 		 ov7620_60HZ, ov7620_60HZ},
-/* SENSOR_OV7630C 11 */
+	[SENSOR_OV7630C] =
 		{NULL, NULL,
 		 NULL, NULL,
 		 NULL, NULL},
-/* SENSOR_PAS106 12 */
+	[SENSOR_PAS106] =
 		{pas106b_NoFliker, pas106b_NoFliker,
 		 pas106b_50HZ, pas106b_50HZ,
 		 pas106b_60HZ, pas106b_60HZ},
-/* SENSOR_PAS202B 13 */
+	[SENSOR_PAS202B] =
 		{pas202b_NoFliker, pas202b_NoFlikerScale,
 		 pas202b_50HZ, pas202b_50HZScale,
 		 pas202b_60HZ, pas202b_60HZScale},
-/* SENSOR_PB0330 14 */
+	[SENSOR_PB0330] =
 		{pb0330_NoFliker, pb0330_NoFlikerScale,
 		 pb0330_50HZ, pb0330_50HZScale,
 		 pb0330_60HZ, pb0330_60HZScale},
-/* SENSOR_PO2030 15 */
+	[SENSOR_PO2030] =
 		{po2030_NoFliker, po2030_NoFliker,
 		 po2030_50HZ, po2030_50HZ,
 		 po2030_60HZ, po2030_60HZ},
-/* SENSOR_TAS5130CK 16 */
-		{tas5130cxx_NoFliker, tas5130cxx_NoFlikerScale,
-		 tas5130cxx_50HZ, tas5130cxx_50HZScale,
-		 tas5130cxx_60HZ, tas5130cxx_60HZScale},
-/* SENSOR_TAS5130CXX 17 */
-		{tas5130cxx_NoFliker, tas5130cxx_NoFlikerScale,
-		 tas5130cxx_50HZ, tas5130cxx_50HZScale,
-		 tas5130cxx_60HZ, tas5130cxx_60HZScale},
-/* SENSOR_TAS5130C_VF0250 18 */
+	[SENSOR_TAS5130C] =
+		{tas5130c_NoFliker, tas5130c_NoFlikerScale,
+		 tas5130c_50HZ, tas5130c_50HZScale,
+		 tas5130c_60HZ, tas5130c_60HZScale},
+	[SENSOR_TAS5130C_VF0250] =
 		{tas5130c_vf0250_NoFliker, tas5130c_vf0250_NoFlikerScale,
 		 tas5130c_vf0250_50HZ, tas5130c_vf0250_50HZScale,
 		 tas5130c_vf0250_60HZ, tas5130c_vf0250_60HZScale},
@@ -6207,29 +6070,28 @@ static int setlightfreq(struct gspca_dev *gspca_dev)
 	if (mode)
 		i++;			/* 320x240 */
 	zc3_freq = freq_tb[sd->sensor][i];
-	if (zc3_freq != NULL) {
-		usb_exchange(gspca_dev, zc3_freq);
-		switch (sd->sensor) {
-		case SENSOR_GC0305:
-			if (mode			/* if 320x240 */
-			    && sd->lightfreq == 1)	/* and 50Hz */
-				reg_w(gspca_dev->dev, 0x85, 0x018d);
-						/* win: 0x80, 0x018d */
-			break;
-		case SENSOR_OV7620:
-			if (!mode) {			/* if 640x480 */
-				if (sd->lightfreq != 0)	/* and 50 or 60 Hz */
-					reg_w(gspca_dev->dev, 0x40, 0x0002);
-				else
-					reg_w(gspca_dev->dev, 0x44, 0x0002);
-			}
-			break;
-		case SENSOR_PAS202B:
-			reg_w(gspca_dev->dev, 0x00, 0x01a7);
-			break;
+	if (zc3_freq == NULL)
+		return;
+	usb_exchange(gspca_dev, zc3_freq);
+	switch (sd->sensor) {
+	case SENSOR_GC0305:
+		if (mode			/* if 320x240 */
+		    && sd->lightfreq == 1)	/* and 50Hz */
+			reg_w(gspca_dev, 0x85, 0x018d);
+					/* win: 0x80, 0x018d */
+		break;
+	case SENSOR_OV7620:
+		if (!mode) {			/* if 640x480 */
+			if (sd->lightfreq != 0)	/* and 50 or 60 Hz */
+				reg_w(gspca_dev, 0x40, 0x0002);
+			else
+				reg_w(gspca_dev, 0x44, 0x0002);
 		}
+		break;
+	case SENSOR_PAS202B:
+		reg_w(gspca_dev, 0x00, 0x01a7);
+		break;
 	}
-	return 0;
 }
 
 static void setautogain(struct gspca_dev *gspca_dev)
@@ -6241,45 +6103,46 @@ static void setautogain(struct gspca_dev *gspca_dev)
 		autoval = 0x42;
 	else
 		autoval = 0x02;
-	reg_w(gspca_dev->dev, autoval, 0x0180);
+	reg_w(gspca_dev, autoval, 0x0180);
 }
 
-static void send_unknown(struct usb_device *dev, int sensor)
+static void send_unknown(struct gspca_dev *gspca_dev, int sensor)
 {
-	reg_w(dev, 0x01, 0x0000);		/* led off */
+	reg_w(gspca_dev, 0x01, 0x0000);		/* led off */
 	switch (sensor) {
 	case SENSOR_PAS106:
-		reg_w(dev, 0x03, 0x003a);
-		reg_w(dev, 0x0c, 0x003b);
-		reg_w(dev, 0x08, 0x0038);
+		reg_w(gspca_dev, 0x03, 0x003a);
+		reg_w(gspca_dev, 0x0c, 0x003b);
+		reg_w(gspca_dev, 0x08, 0x0038);
 		break;
 	case SENSOR_ADCM2700:
 	case SENSOR_GC0305:
 	case SENSOR_OV7620:
-	case SENSOR_MI0360SOC:
+	case SENSOR_MT9V111_1:
+	case SENSOR_MT9V111_3:
 	case SENSOR_PB0330:
 	case SENSOR_PO2030:
-		reg_w(dev, 0x0d, 0x003a);
-		reg_w(dev, 0x02, 0x003b);
-		reg_w(dev, 0x00, 0x0038);
+		reg_w(gspca_dev, 0x0d, 0x003a);
+		reg_w(gspca_dev, 0x02, 0x003b);
+		reg_w(gspca_dev, 0x00, 0x0038);
 		break;
 	case SENSOR_PAS202B:
-		reg_w(dev, 0x03, 0x003b);
-		reg_w(dev, 0x0c, 0x003a);
-		reg_w(dev, 0x0b, 0x0039);
-		reg_w(dev, 0x0b, 0x0038);
+		reg_w(gspca_dev, 0x03, 0x003b);
+		reg_w(gspca_dev, 0x0c, 0x003a);
+		reg_w(gspca_dev, 0x0b, 0x0039);
+		reg_w(gspca_dev, 0x0b, 0x0038);
 		break;
 	}
 }
 
 /* start probe 2 wires */
-static void start_2wr_probe(struct usb_device *dev, int sensor)
+static void start_2wr_probe(struct gspca_dev *gspca_dev, int sensor)
 {
-	reg_w(dev, 0x01, 0x0000);
-	reg_w(dev, sensor, 0x0010);
-	reg_w(dev, 0x01, 0x0001);
-	reg_w(dev, 0x03, 0x0012);
-	reg_w(dev, 0x01, 0x0012);
+	reg_w(gspca_dev, 0x01, 0x0000);
+	reg_w(gspca_dev, sensor, 0x0010);
+	reg_w(gspca_dev, 0x01, 0x0001);
+	reg_w(gspca_dev, 0x03, 0x0012);
+	reg_w(gspca_dev, 0x01, 0x0012);
 /*	msleep(2); */
 }
 
@@ -6287,14 +6150,14 @@ static int sif_probe(struct gspca_dev *gspca_dev)
 {
 	u16 checkword;
 
-	start_2wr_probe(gspca_dev->dev, 0x0f);		/* PAS106 */
-	reg_w(gspca_dev->dev, 0x08, 0x008d);
+	start_2wr_probe(gspca_dev, 0x0f);		/* PAS106 */
+	reg_w(gspca_dev, 0x08, 0x008d);
 	msleep(150);
 	checkword = ((i2c_read(gspca_dev, 0x00) & 0x0f) << 4)
 			| ((i2c_read(gspca_dev, 0x01) & 0xf0) >> 4);
 	PDEBUG(D_PROBE, "probe sif 0x%04x", checkword);
 	if (checkword == 0x0007) {
-		send_unknown(gspca_dev->dev, SENSOR_PAS106);
+		send_unknown(gspca_dev, SENSOR_PAS106);
 		return 0x0f;			/* PAS106 */
 	}
 	return -1;
@@ -6302,23 +6165,22 @@ static int sif_probe(struct gspca_dev *gspca_dev)
 
 static int vga_2wr_probe(struct gspca_dev *gspca_dev)
 {
-	struct usb_device *dev = gspca_dev->dev;
 	u16 retword;
 
-	start_2wr_probe(dev, 0x00);		/* HV7131B */
+	start_2wr_probe(gspca_dev, 0x00);	/* HV7131B */
 	i2c_write(gspca_dev, 0x01, 0xaa, 0x00);
 	retword = i2c_read(gspca_dev, 0x01);
 	if (retword != 0)
 		return 0x00;			/* HV7131B */
 
-	start_2wr_probe(dev, 0x04);		/* CS2102 */
+	start_2wr_probe(gspca_dev, 0x04);	/* CS2102 */
 	i2c_write(gspca_dev, 0x01, 0xaa, 0x00);
 	retword = i2c_read(gspca_dev, 0x01);
 	if (retword != 0)
 		return 0x04;			/* CS2102 */
 
-	start_2wr_probe(dev, 0x06);		/* OmniVision */
-	reg_w(dev, 0x08, 0x008d);
+	start_2wr_probe(gspca_dev, 0x06);	/* OmniVision */
+	reg_w(gspca_dev, 0x08, 0x008d);
 	i2c_write(gspca_dev, 0x11, 0xaa, 0x00);
 	retword = i2c_read(gspca_dev, 0x11);
 	if (retword != 0) {
@@ -6327,14 +6189,14 @@ static int vga_2wr_probe(struct gspca_dev *gspca_dev)
 		goto ov_check;
 	}
 
-	start_2wr_probe(dev, 0x08);		/* HDCS2020 */
+	start_2wr_probe(gspca_dev, 0x08);	/* HDCS2020 */
 	i2c_write(gspca_dev, 0x1c, 0x00, 0x00);
 	i2c_write(gspca_dev, 0x15, 0xaa, 0x00);
 	retword = i2c_read(gspca_dev, 0x15);
 	if (retword != 0)
 		return 0x08;			/* HDCS2020 */
 
-	start_2wr_probe(dev, 0x0a);		/* PB0330 */
+	start_2wr_probe(gspca_dev, 0x0a);	/* PB0330 */
 	i2c_write(gspca_dev, 0x07, 0xaa, 0xaa);
 	retword = i2c_read(gspca_dev, 0x07);
 	if (retword != 0)
@@ -6346,23 +6208,23 @@ static int vga_2wr_probe(struct gspca_dev *gspca_dev)
 	if (retword != 0)
 		return 0x0a;			/* PB0330 ?? */
 
-	start_2wr_probe(dev, 0x0c);		/* ICM105A */
+	start_2wr_probe(gspca_dev, 0x0c);	/* ICM105A */
 	i2c_write(gspca_dev, 0x01, 0x11, 0x00);
 	retword = i2c_read(gspca_dev, 0x01);
 	if (retword != 0)
 		return 0x0c;			/* ICM105A */
 
-	start_2wr_probe(dev, 0x0e);		/* PAS202BCB */
-	reg_w(dev, 0x08, 0x008d);
+	start_2wr_probe(gspca_dev, 0x0e);	/* PAS202BCB */
+	reg_w(gspca_dev, 0x08, 0x008d);
 	i2c_write(gspca_dev, 0x03, 0xaa, 0x00);
 	msleep(50);
 	retword = i2c_read(gspca_dev, 0x03);
 	if (retword != 0) {
-		send_unknown(dev, SENSOR_PAS202B);
+		send_unknown(gspca_dev, SENSOR_PAS202B);
 		return 0x0e;			/* PAS202BCB */
 	}
 
-	start_2wr_probe(dev, 0x02);		/* TAS5130C */
+	start_2wr_probe(gspca_dev, 0x02);	/* TAS5130C */
 	i2c_write(gspca_dev, 0x01, 0xaa, 0x00);
 	retword = i2c_read(gspca_dev, 0x01);
 	if (retword != 0)
@@ -6371,20 +6233,20 @@ ov_check:
 	reg_r(gspca_dev, 0x0010);		/* ?? */
 	reg_r(gspca_dev, 0x0010);
 
-	reg_w(dev, 0x01, 0x0000);
-	reg_w(dev, 0x01, 0x0001);
-	reg_w(dev, 0x06, 0x0010);		/* OmniVision */
-	reg_w(dev, 0xa1, 0x008b);
-	reg_w(dev, 0x08, 0x008d);
+	reg_w(gspca_dev, 0x01, 0x0000);
+	reg_w(gspca_dev, 0x01, 0x0001);
+	reg_w(gspca_dev, 0x06, 0x0010);		/* OmniVision */
+	reg_w(gspca_dev, 0xa1, 0x008b);
+	reg_w(gspca_dev, 0x08, 0x008d);
 	msleep(500);
-	reg_w(dev, 0x01, 0x0012);
+	reg_w(gspca_dev, 0x01, 0x0012);
 	i2c_write(gspca_dev, 0x12, 0x80, 0x00);	/* sensor reset */
 	retword = i2c_read(gspca_dev, 0x0a) << 8;
 	retword |= i2c_read(gspca_dev, 0x0b);
 	PDEBUG(D_PROBE, "probe 2wr ov vga 0x%04x", retword);
 	switch (retword) {
 	case 0x7631:				/* OV7630C */
-		reg_w(dev, 0x06, 0x0010);
+		reg_w(gspca_dev, 0x06, 0x0010);
 		break;
 	case 0x7620:				/* OV7620 */
 	case 0x7648:				/* OV7648 */
@@ -6401,32 +6263,31 @@ struct sensor_by_chipset_revision {
 };
 static const struct sensor_by_chipset_revision chipset_revision_sensor[] = {
 	{0xc000, 0x12},		/* TAS5130C */
-	{0xc001, 0x13},		/* MI0360SOC */
+	{0xc001, 0x13},		/* MT9V111 */
 	{0xe001, 0x13},
 	{0x8001, 0x13},
 	{0x8000, 0x14},		/* CS2102K */
-	{0x8400, 0x15},		/* TAS5130K */
+	{0x8400, 0x15},		/* MT9V111 */
 	{0xe400, 0x15},
 };
 
 static int vga_3wr_probe(struct gspca_dev *gspca_dev)
 {
 	struct sd *sd = (struct sd *) gspca_dev;
-	struct usb_device *dev = gspca_dev->dev;
 	int i;
 	u8 retbyte;
 	u16 retword;
 
 /*fixme: lack of 8b=b3 (11,12)-> 10, 8b=e0 (14,15,16)-> 12 found in gspcav1*/
-	reg_w(dev, 0x02, 0x0010);
+	reg_w(gspca_dev, 0x02, 0x0010);
 	reg_r(gspca_dev, 0x0010);
-	reg_w(dev, 0x01, 0x0000);
-	reg_w(dev, 0x00, 0x0010);
-	reg_w(dev, 0x01, 0x0001);
-	reg_w(dev, 0x91, 0x008b);
-	reg_w(dev, 0x03, 0x0012);
-	reg_w(dev, 0x01, 0x0012);
-	reg_w(dev, 0x05, 0x0012);
+	reg_w(gspca_dev, 0x01, 0x0000);
+	reg_w(gspca_dev, 0x00, 0x0010);
+	reg_w(gspca_dev, 0x01, 0x0001);
+	reg_w(gspca_dev, 0x91, 0x008b);
+	reg_w(gspca_dev, 0x03, 0x0012);
+	reg_w(gspca_dev, 0x01, 0x0012);
+	reg_w(gspca_dev, 0x05, 0x0012);
 	retword = i2c_read(gspca_dev, 0x14);
 	if (retword != 0)
 		return 0x11;			/* HV7131R */
@@ -6437,93 +6298,90 @@ static int vga_3wr_probe(struct gspca_dev *gspca_dev)
 	if (retword != 0)
 		return 0x11;			/* HV7131R */
 
-	reg_w(dev, 0x02, 0x0010);
+	reg_w(gspca_dev, 0x02, 0x0010);
 	retword = reg_r(gspca_dev, 0x000b) << 8;
 	retword |= reg_r(gspca_dev, 0x000a);
 	PDEBUG(D_PROBE, "probe 3wr vga 1 0x%04x", retword);
 	reg_r(gspca_dev, 0x0010);
-	/* value 0x4001 is meaningless */
-	if (retword != 0x4001) {
-		if ((retword & 0xff00) == 0x6400)
-			return 0x02;		/* TAS5130C */
-		for (i = 0; i < ARRAY_SIZE(chipset_revision_sensor); i++) {
-			if (chipset_revision_sensor[i].revision == retword) {
-				sd->chip_revision = retword;
-				send_unknown(dev, SENSOR_PB0330);
-				return chipset_revision_sensor[i]
-							.internal_sensor_id;
-			}
+	if ((retword & 0xff00) == 0x6400)
+		return 0x02;		/* TAS5130C */
+	for (i = 0; i < ARRAY_SIZE(chipset_revision_sensor); i++) {
+		if (chipset_revision_sensor[i].revision == retword) {
+			sd->chip_revision = retword;
+			send_unknown(gspca_dev, SENSOR_PB0330);
+			return chipset_revision_sensor[i]
+						.internal_sensor_id;
 		}
 	}
 
-	reg_w(dev, 0x01, 0x0000);	/* check PB0330 */
-	reg_w(dev, 0x01, 0x0001);
-	reg_w(dev, 0xdd, 0x008b);
-	reg_w(dev, 0x0a, 0x0010);
-	reg_w(dev, 0x03, 0x0012);
-	reg_w(dev, 0x01, 0x0012);
+	reg_w(gspca_dev, 0x01, 0x0000);	/* check PB0330 */
+	reg_w(gspca_dev, 0x01, 0x0001);
+	reg_w(gspca_dev, 0xdd, 0x008b);
+	reg_w(gspca_dev, 0x0a, 0x0010);
+	reg_w(gspca_dev, 0x03, 0x0012);
+	reg_w(gspca_dev, 0x01, 0x0012);
 	retword = i2c_read(gspca_dev, 0x00);
 	if (retword != 0) {
-		PDEBUG(D_PROBE, "probe 3wr vga type 0a ?");
+		PDEBUG(D_PROBE, "probe 3wr vga type 0a");
 		return 0x0a;			/* PB0330 */
 	}
 
-	reg_w(dev, 0x01, 0x0000);
-	reg_w(dev, 0x01, 0x0001);
-	reg_w(dev, 0x98, 0x008b);
-	reg_w(dev, 0x01, 0x0010);
-	reg_w(dev, 0x03, 0x0012);
+	reg_w(gspca_dev, 0x01, 0x0000);
+	reg_w(gspca_dev, 0x01, 0x0001);
+	reg_w(gspca_dev, 0x98, 0x008b);
+	reg_w(gspca_dev, 0x01, 0x0010);
+	reg_w(gspca_dev, 0x03, 0x0012);
 	msleep(2);
-	reg_w(dev, 0x01, 0x0012);
+	reg_w(gspca_dev, 0x01, 0x0012);
 	retword = i2c_read(gspca_dev, 0x00);
 	if (retword != 0) {
 		PDEBUG(D_PROBE, "probe 3wr vga type %02x", retword);
 		if (retword == 0x0011)			/* VF0250 */
 			return 0x0250;
 		if (retword == 0x0029)			/* gc0305 */
-			send_unknown(dev, SENSOR_GC0305);
+			send_unknown(gspca_dev, SENSOR_GC0305);
 		return retword;
 	}
 
-	reg_w(dev, 0x01, 0x0000);	/* check OmniVision */
-	reg_w(dev, 0x01, 0x0001);
-	reg_w(dev, 0xa1, 0x008b);
-	reg_w(dev, 0x08, 0x008d);
-	reg_w(dev, 0x06, 0x0010);
-	reg_w(dev, 0x01, 0x0012);
-	reg_w(dev, 0x05, 0x0012);
+	reg_w(gspca_dev, 0x01, 0x0000);	/* check OmniVision */
+	reg_w(gspca_dev, 0x01, 0x0001);
+	reg_w(gspca_dev, 0xa1, 0x008b);
+	reg_w(gspca_dev, 0x08, 0x008d);
+	reg_w(gspca_dev, 0x06, 0x0010);
+	reg_w(gspca_dev, 0x01, 0x0012);
+	reg_w(gspca_dev, 0x05, 0x0012);
 	if (i2c_read(gspca_dev, 0x1c) == 0x007f	/* OV7610 - manufacturer ID */
 	    && i2c_read(gspca_dev, 0x1d) == 0x00a2) {
-		send_unknown(dev, SENSOR_OV7620);
+		send_unknown(gspca_dev, SENSOR_OV7620);
 		return 0x06;		/* OmniVision confirm ? */
 	}
 
-	reg_w(dev, 0x01, 0x0000);
-	reg_w(dev, 0x00, 0x0002);
-	reg_w(dev, 0x01, 0x0010);
-	reg_w(dev, 0x01, 0x0001);
-	reg_w(dev, 0xee, 0x008b);
-	reg_w(dev, 0x03, 0x0012);
-	reg_w(dev, 0x01, 0x0012);
-	reg_w(dev, 0x05, 0x0012);
+	reg_w(gspca_dev, 0x01, 0x0000);
+	reg_w(gspca_dev, 0x00, 0x0002);
+	reg_w(gspca_dev, 0x01, 0x0010);
+	reg_w(gspca_dev, 0x01, 0x0001);
+	reg_w(gspca_dev, 0xee, 0x008b);
+	reg_w(gspca_dev, 0x03, 0x0012);
+	reg_w(gspca_dev, 0x01, 0x0012);
+	reg_w(gspca_dev, 0x05, 0x0012);
 	retword = i2c_read(gspca_dev, 0x00) << 8;	/* ID 0 */
 	retword |= i2c_read(gspca_dev, 0x01);		/* ID 1 */
 	PDEBUG(D_PROBE, "probe 3wr vga 2 0x%04x", retword);
 	if (retword == 0x2030) {
 		retbyte = i2c_read(gspca_dev, 0x02);	/* revision number */
 		PDEBUG(D_PROBE, "sensor PO2030 rev 0x%02x", retbyte);
-		send_unknown(dev, SENSOR_PO2030);
+		send_unknown(gspca_dev, SENSOR_PO2030);
 		return retword;
 	}
 
-	reg_w(dev, 0x01, 0x0000);
-	reg_w(dev, 0x0a, 0x0010);
-	reg_w(dev, 0xd3, 0x008b);
-	reg_w(dev, 0x01, 0x0001);
-	reg_w(dev, 0x03, 0x0012);
-	reg_w(dev, 0x01, 0x0012);
-	reg_w(dev, 0x05, 0x0012);
-	reg_w(dev, 0xd3, 0x008b);
+	reg_w(gspca_dev, 0x01, 0x0000);
+	reg_w(gspca_dev, 0x0a, 0x0010);
+	reg_w(gspca_dev, 0xd3, 0x008b);
+	reg_w(gspca_dev, 0x01, 0x0001);
+	reg_w(gspca_dev, 0x03, 0x0012);
+	reg_w(gspca_dev, 0x01, 0x0012);
+	reg_w(gspca_dev, 0x05, 0x0012);
+	reg_w(gspca_dev, 0xd3, 0x008b);
 	retword = i2c_read(gspca_dev, 0x01);
 	if (retword != 0) {
 		PDEBUG(D_PROBE, "probe 3wr vga type 0a ? ret: %04x", retword);
@@ -6558,56 +6416,76 @@ static int zcxx_probeSensor(struct gspca_dev *gspca_dev)
 /* this function is called at probe time */
 static int sd_config(struct gspca_dev *gspca_dev,
 			const struct usb_device_id *id)
+{
+	struct sd *sd = (struct sd *) gspca_dev;
+
+	if (id->idProduct == 0x301b)
+		sd->bridge = BRIDGE_ZC301;
+	else
+		sd->bridge = BRIDGE_ZC303;
+
+	/* define some sensors from the vendor/product */
+	sd->sensor = id->driver_info;
+
+	sd->sharpness = SHARPNESS_DEF;
+	sd->brightness = BRIGHTNESS_DEF;
+	sd->contrast = CONTRAST_DEF;
+	sd->autogain = AUTOGAIN_DEF;
+	sd->lightfreq = FREQ_DEF;
+	sd->quality = QUALITY_DEF;
+
+	return 0;
+}
+
+/* this function is called at probe and resume time */
+static int sd_init(struct gspca_dev *gspca_dev)
 {
 	struct sd *sd = (struct sd *) gspca_dev;
 	struct cam *cam;
 	int sensor;
 	static const u8 gamma[SENSOR_MAX] = {
-		4,	/* SENSOR_ADCM2700 0 */
-		4,	/* SENSOR_CS2102 1 */
-		5,	/* SENSOR_CS2102K 2 */
-		4,	/* SENSOR_GC0305 3 */
-		4,	/* SENSOR_HDCS2020b 4 */
-		4,	/* SENSOR_HV7131B 5 */
-		4,	/* SENSOR_HV7131C 6 */
-		4,	/* SENSOR_ICM105A 7 */
-		4,	/* SENSOR_MC501CB 8 */
-		4,	/* SENSOR_MI0360SOC 9 */
-		3,	/* SENSOR_OV7620 10 */
-		4,	/* SENSOR_OV7630C 11 */
-		4,	/* SENSOR_PAS106 12 */
-		4,	/* SENSOR_PAS202B 13 */
-		4,	/* SENSOR_PB0330 14 */
-		4,	/* SENSOR_PO2030 15 */
-		4,	/* SENSOR_TAS5130CK 16 */
-		3,	/* SENSOR_TAS5130CXX 17 */
-		3,	/* SENSOR_TAS5130C_VF0250 18 */
+		[SENSOR_ADCM2700] =	4,
+		[SENSOR_CS2102] =	4,
+		[SENSOR_CS2102K] =	5,
+		[SENSOR_GC0305] =	4,
+		[SENSOR_HDCS2020b] =	4,
+		[SENSOR_HV7131B] =	4,
+		[SENSOR_HV7131R] =	4,
+		[SENSOR_ICM105A] =	4,
+		[SENSOR_MC501CB] =	4,
+		[SENSOR_MT9V111_1] =	4,
+		[SENSOR_MT9V111_3] =	4,
+		[SENSOR_OV7620] =	3,
+		[SENSOR_OV7630C] =	4,
+		[SENSOR_PAS106] =	4,
+		[SENSOR_PAS202B] =	4,
+		[SENSOR_PB0330] =	4,
+		[SENSOR_PO2030] =	4,
+		[SENSOR_TAS5130C] =	3,
+		[SENSOR_TAS5130C_VF0250] = 3,
 	};
 	static const u8 mode_tb[SENSOR_MAX] = {
-		2,	/* SENSOR_ADCM2700 0 */
-		1,	/* SENSOR_CS2102 1 */
-		1,	/* SENSOR_CS2102K 2 */
-		1,	/* SENSOR_GC0305 3 */
-		1,	/* SENSOR_HDCS2020b 4 */
-		1,	/* SENSOR_HV7131B 5 */
-		1,	/* SENSOR_HV7131C 6 */
-		1,	/* SENSOR_ICM105A 7 */
-		2,	/* SENSOR_MC501CB 8 */
-		1,	/* SENSOR_MI0360SOC 9 */
-		2,	/* SENSOR_OV7620 10 */
-		1,	/* SENSOR_OV7630C 11 */
-		0,	/* SENSOR_PAS106 12 */
-		1,	/* SENSOR_PAS202B 13 */
-		1,	/* SENSOR_PB0330 14 */
-		1,	/* SENSOR_PO2030 15 */
-		1,	/* SENSOR_TAS5130CK 16 */
-		1,	/* SENSOR_TAS5130CXX 17 */
-		1,	/* SENSOR_TAS5130C_VF0250 18 */
+		[SENSOR_ADCM2700] =	2,
+		[SENSOR_CS2102] =	1,
+		[SENSOR_CS2102K] =	1,
+		[SENSOR_GC0305] =	1,
+		[SENSOR_HDCS2020b] =	1,
+		[SENSOR_HV7131B] =	1,
+		[SENSOR_HV7131R] =	1,
+		[SENSOR_ICM105A] =	1,
+		[SENSOR_MC501CB] =	2,
+		[SENSOR_MT9V111_1] =	1,
+		[SENSOR_MT9V111_3] =	1,
+		[SENSOR_OV7620] =	2,
+		[SENSOR_OV7630C] =	1,
+		[SENSOR_PAS106] =	0,
+		[SENSOR_PAS202B] =	1,
+		[SENSOR_PB0330] =	1,
+		[SENSOR_PO2030] =	1,
+		[SENSOR_TAS5130C] =	1,
+		[SENSOR_TAS5130C_VF0250] = 1,
 	};
 
-	/* define some sensors from the vendor/product */
-	sd->sharpness = SHARPNESS_DEF;
-	sd->sensor = id->driver_info;
 	sensor = zcxx_probeSensor(gspca_dev);
 	if (sensor >= 0)
 		PDEBUG(D_PROBE, "probe sensor -> %04x", sensor);
@@ -6626,8 +6504,8 @@ static int sd_config(struct gspca_dev *gspca_dev,
 				break;
 			default:
 				PDEBUG(D_PROBE,
-					"Sensor UNKNOWN_0 force Tas5130");
-				sd->sensor = SENSOR_TAS5130CXX;
+					"Unknown sensor - set to TAS5130C");
+				sd->sensor = SENSOR_TAS5130C;
 			}
 			break;
 		case 0:
@@ -6642,14 +6520,14 @@ static int sd_config(struct gspca_dev *gspca_dev,
 				break;
 			default:
 /*			case 2:			 * hv7131r */
-				PDEBUG(D_PROBE, "Find Sensor HV7131R(c)");
-				sd->sensor = SENSOR_HV7131C;
+				PDEBUG(D_PROBE, "Find Sensor HV7131R");
+				sd->sensor = SENSOR_HV7131R;
 				break;
 			}
 			break;
 		case 0x02:
 			PDEBUG(D_PROBE, "Sensor TAS5130C");
-			sd->sensor = SENSOR_TAS5130CXX;
+			sd->sensor = SENSOR_TAS5130C;
 			break;
 		case 0x04:
 			PDEBUG(D_PROBE, "Find Sensor CS2102");
@@ -6681,17 +6559,20 @@ static int sd_config(struct gspca_dev *gspca_dev,
 		case 0x10:
 		case 0x12:
 			PDEBUG(D_PROBE, "Find Sensor TAS5130C");
-			sd->sensor = SENSOR_TAS5130CXX;
+			sd->sensor = SENSOR_TAS5130C;
 			break;
 		case 0x11:
-			PDEBUG(D_PROBE, "Find Sensor HV7131R(c)");
-			sd->sensor = SENSOR_HV7131C;
+			PDEBUG(D_PROBE, "Find Sensor HV7131R");
+			sd->sensor = SENSOR_HV7131R;
 			break;
 		case 0x13:
+		case 0x15:
 			PDEBUG(D_PROBE,
-				"Find Sensor MI0360SOC. Chip revision %x",
+				"Sensor MT9V111. Chip revision %04x",
 				sd->chip_revision);
-			sd->sensor = SENSOR_MI0360SOC;
+			sd->sensor = sd->bridge == BRIDGE_ZC301
+					? SENSOR_MT9V111_1
+					: SENSOR_MT9V111_3;
 			break;
 		case 0x14:
 			PDEBUG(D_PROBE,
@@ -6699,12 +6580,6 @@ static int sd_config(struct gspca_dev *gspca_dev,
 				sd->chip_revision);
 			sd->sensor = SENSOR_CS2102K;
 			break;
-		case 0x15:
-			PDEBUG(D_PROBE,
-				"Find Sensor TAS5130CK?. Chip revision %x",
-				sd->chip_revision);
-			sd->sensor = SENSOR_TAS5130CK;
-			break;
 		case 0x16:
 			PDEBUG(D_PROBE, "Find Sensor ADCM2700");
 			sd->sensor = SENSOR_ADCM2700;
@@ -6741,13 +6616,11 @@ static int sd_config(struct gspca_dev *gspca_dev,
 	}
 	if (sensor < 0x20) {
 		if (sensor == -1 || sensor == 0x10 || sensor == 0x12)
-			reg_w(gspca_dev->dev, 0x02, 0x0010);
+			reg_w(gspca_dev, 0x02, 0x0010);
 		reg_r(gspca_dev, 0x0010);
 	}
 
 	cam = &gspca_dev->cam;
-/*fixme:test*/
-	gspca_dev->nbalt--;
 	switch (mode_tb[sd->sensor]) {
 	case 0:
 		cam->cam_mode = sif_mode;
@@ -6763,58 +6636,62 @@ static int sd_config(struct gspca_dev *gspca_dev,
 		cam->nmodes = ARRAY_SIZE(broken_vga_mode);
 		break;
 	}
-	sd->brightness = BRIGHTNESS_DEF;
-	sd->contrast = CONTRAST_DEF;
 	sd->gamma = gamma[sd->sensor];
-	sd->autogain = AUTOGAIN_DEF;
-	sd->lightfreq = FREQ_DEF;
-	sd->quality = QUALITY_DEF;
 
 	switch (sd->sensor) {
-	case SENSOR_HV7131B:
-	case SENSOR_HV7131C:
 	case SENSOR_OV7630C:
 		gspca_dev->ctrl_dis = (1 << LIGHTFREQ_IDX);
 		break;
 	}
 
-	return 0;
-}
-
-/* this function is called at probe and resume time */
-static int sd_init(struct gspca_dev *gspca_dev)
-{
 	/* switch off the led */
-	reg_w(gspca_dev->dev, 0x01, 0x0000);
-	return 0;
+	reg_w(gspca_dev, 0x01, 0x0000);
+	return gspca_dev->usb_err;
 }
 
 static int sd_start(struct gspca_dev *gspca_dev)
 {
 	struct sd *sd = (struct sd *) gspca_dev;
-	struct usb_device *dev = gspca_dev->dev;
 	int mode;
 	static const struct usb_action *init_tb[SENSOR_MAX][2] = {
-		{adcm2700_Initial, adcm2700_InitialScale},	/* 0 */
-		{cs2102_Initial, cs2102_InitialScale},		/* 1 */
-		{cs2102K_Initial, cs2102K_InitialScale},	/* 2 */
-		{gc0305_Initial, gc0305_InitialScale},		/* 3 */
-		{hdcs2020b_Initial, hdcs2020b_InitialScale},	/* 4 */
-		{hv7131b_Initial, hv7131b_InitialScale},	/* 5 */
-		{hv7131r_Initial, hv7131r_InitialScale},	/* 6 */
-		{icm105a_Initial, icm105a_InitialScale},	/* 7 */
-		{mc501cb_Initial, mc501cb_InitialScale},	/* 8 */
-		{mi0360soc_Initial, mi0360soc_InitialScale},	/* 9 */
-		{ov7620_Initial, ov7620_InitialScale},		/* 10 */
-		{ov7630c_Initial, ov7630c_InitialScale},	/* 11 */
-		{pas106b_Initial, pas106b_InitialScale},	/* 12 */
-		{pas202b_Initial, pas202b_InitialScale},	/* 13 */
-		{pb0330_Initial, pb0330_InitialScale},		/* 14 */
-		{po2030_Initial, po2030_InitialScale},		/* 15 */
-		{tas5130cK_Initial, tas5130cK_InitialScale},	/* 16 */
-		{tas5130cxx_Initial, tas5130cxx_InitialScale},	/* 17 */
+	[SENSOR_ADCM2700] =
+			{adcm2700_Initial, adcm2700_InitialScale},
+	[SENSOR_CS2102]	=
+			{cs2102_Initial, cs2102_InitialScale},
+	[SENSOR_CS2102K] =
+			{cs2102K_Initial, cs2102K_InitialScale},
+	[SENSOR_GC0305] =
+			{gc0305_Initial, gc0305_InitialScale},
+	[SENSOR_HDCS2020b] =
+			{hdcs2020b_Initial, hdcs2020b_InitialScale},
+	[SENSOR_HV7131B] =
+			{hv7131b_Initial, hv7131b_InitialScale},
+	[SENSOR_HV7131R] =
+			{hv7131r_Initial, hv7131r_InitialScale},
+	[SENSOR_ICM105A] =
+			{icm105a_Initial, icm105a_InitialScale},
+	[SENSOR_MC501CB] =
+			{mc501cb_Initial, mc501cb_InitialScale},
+	[SENSOR_MT9V111_1] =
+			{mt9v111_1_Initial, mt9v111_1_InitialScale},
+	[SENSOR_MT9V111_3] =
+			{mt9v111_3_Initial, mt9v111_3_InitialScale},
+	[SENSOR_OV7620] =
+			{ov7620_Initial, ov7620_InitialScale},
+	[SENSOR_OV7630C] =
+			{ov7630c_Initial, ov7630c_InitialScale},
+	[SENSOR_PAS106] =
+			{pas106b_Initial, pas106b_InitialScale},
+	[SENSOR_PAS202B] =
+			{pas202b_Initial, pas202b_InitialScale},
+	[SENSOR_PB0330] =
+			{pb0330_Initial, pb0330_InitialScale},
+	[SENSOR_PO2030] =
+			{po2030_Initial, po2030_InitialScale},
+	[SENSOR_TAS5130C] =
+			{tas5130c_Initial, tas5130c_InitialScale},
+	[SENSOR_TAS5130C_VF0250] =
 		{tas5130c_vf0250_Initial, tas5130c_vf0250_InitialScale},
-								/* 18 */
 	};
 
 	/* create the JPEG header */
@@ -6824,7 +6701,7 @@ static int sd_start(struct gspca_dev *gspca_dev)
 
 	mode = gspca_dev->cam.cam_mode[gspca_dev->curr_mode].priv;
 	switch (sd->sensor) {
-	case SENSOR_HV7131C:
+	case SENSOR_HV7131R:
 		zcxx_probeSensor(gspca_dev);
 		break;
 	case SENSOR_PAS106:
@@ -6838,22 +6715,22 @@ static int sd_start(struct gspca_dev *gspca_dev)
 	case SENSOR_GC0305:
 	case SENSOR_OV7620:
 	case SENSOR_PO2030:
-	case SENSOR_TAS5130CXX:
+	case SENSOR_TAS5130C:
 	case SENSOR_TAS5130C_VF0250:
 /*		msleep(100);			 * ?? */
 		reg_r(gspca_dev, 0x0002);	/* --> 0x40 */
-		reg_w(dev, 0x09, 0x01ad);	/* (from win traces) */
-		reg_w(dev, 0x15, 0x01ae);
-		if (sd->sensor == SENSOR_TAS5130CXX)
+		reg_w(gspca_dev, 0x09, 0x01ad);	/* (from win traces) */
+		reg_w(gspca_dev, 0x15, 0x01ae);
+		if (sd->sensor == SENSOR_TAS5130C)
 			break;
-		reg_w(dev, 0x0d, 0x003a);
-		reg_w(dev, 0x02, 0x003b);
-		reg_w(dev, 0x00, 0x0038);
+		reg_w(gspca_dev, 0x0d, 0x003a);
+		reg_w(gspca_dev, 0x02, 0x003b);
+		reg_w(gspca_dev, 0x00, 0x0038);
 		break;
 	case SENSOR_PAS202B:
-		reg_w(dev, 0x03, 0x003b);
-		reg_w(dev, 0x0c, 0x003a);
-		reg_w(dev, 0x0b, 0x0039);
+		reg_w(gspca_dev, 0x03, 0x003b);
+		reg_w(gspca_dev, 0x0c, 0x003a);
+		reg_w(gspca_dev, 0x0b, 0x0039);
 		break;
 	}
 
@@ -6862,15 +6739,15 @@ static int sd_start(struct gspca_dev *gspca_dev)
 	case SENSOR_ADCM2700:
 	case SENSOR_OV7620:
 		reg_r(gspca_dev, 0x0008);
-		reg_w(dev, 0x00, 0x0008);
+		reg_w(gspca_dev, 0x00, 0x0008);
 		break;
 	case SENSOR_PAS202B:
 	case SENSOR_GC0305:
-	case SENSOR_TAS5130CXX:
+	case SENSOR_TAS5130C:
 		reg_r(gspca_dev, 0x0008);
 		/* fall thru */
 	case SENSOR_PO2030:
-		reg_w(dev, 0x03, 0x0008);
+		reg_w(gspca_dev, 0x03, 0x0008);
 		break;
 	}
 	setsharpness(gspca_dev);
@@ -6880,7 +6757,6 @@ static int sd_start(struct gspca_dev *gspca_dev)
 	case SENSOR_CS2102K:		/* gamma set in xxx_Initial */
 	case SENSOR_HDCS2020b:
 	case SENSOR_OV7630C:
-	case SENSOR_TAS5130CK:
 		break;
 	default:
 		setcontrast(gspca_dev);
@@ -6891,7 +6767,7 @@ static int sd_start(struct gspca_dev *gspca_dev)
 	case SENSOR_OV7620:
 	case SENSOR_PAS202B:
 		reg_r(gspca_dev, 0x0180);	/* from win */
-		reg_w(dev, 0x00, 0x0180);
+		reg_w(gspca_dev, 0x00, 0x0180);
 		break;
 	default:
 		setquality(gspca_dev);
@@ -6901,29 +6777,29 @@ static int sd_start(struct gspca_dev *gspca_dev)
 
 	switch (sd->sensor) {
 	case SENSOR_ADCM2700:
-		reg_w(dev, 0x09, 0x01ad);	/* (from win traces) */
-		reg_w(dev, 0x15, 0x01ae);
-		reg_w(dev, 0x02, 0x0180);
+		reg_w(gspca_dev, 0x09, 0x01ad);	/* (from win traces) */
+		reg_w(gspca_dev, 0x15, 0x01ae);
+		reg_w(gspca_dev, 0x02, 0x0180);
 						/* ms-win + */
-		reg_w(dev, 0x40, 0x0117);
+		reg_w(gspca_dev, 0x40, 0x0117);
 		break;
 	case SENSOR_GC0305:
-	case SENSOR_TAS5130CXX:
-		reg_w(dev, 0x09, 0x01ad);	/* (from win traces) */
-		reg_w(dev, 0x15, 0x01ae);
+	case SENSOR_TAS5130C:
+		reg_w(gspca_dev, 0x09, 0x01ad);	/* (from win traces) */
+		reg_w(gspca_dev, 0x15, 0x01ae);
 		/* fall thru */
 	case SENSOR_PAS202B:
 	case SENSOR_PO2030:
-/*		reg_w(dev, 0x40, ZC3XX_R117_GGAIN);  * (from win traces) */
+/*		reg_w(gspca_dev, 0x40, ZC3XX_R117_GGAIN);  * (from win traces) */
 		reg_r(gspca_dev, 0x0180);
 		break;
 	case SENSOR_OV7620:
-		reg_w(dev, 0x09, 0x01ad);
-		reg_w(dev, 0x15, 0x01ae);
+		reg_w(gspca_dev, 0x09, 0x01ad);
+		reg_w(gspca_dev, 0x15, 0x01ae);
 		i2c_read(gspca_dev, 0x13);	/*fixme: returns 0xa3 */
 		i2c_write(gspca_dev, 0x13, 0xa3, 0x00);
 					 /*fixme: returned value to send? */
-		reg_w(dev, 0x40, 0x0117);
+		reg_w(gspca_dev, 0x40, 0x0117);
 		reg_r(gspca_dev, 0x0180);
 		break;
 	}
@@ -6932,11 +6808,11 @@ static int sd_start(struct gspca_dev *gspca_dev)
 	switch (sd->sensor) {
 	case SENSOR_PO2030:
 		msleep(50);
-		reg_w(dev, 0x00, 0x0007);	/* (from win traces) */
-		reg_w(dev, 0x02, ZC3XX_R008_CLOCKSETTING);
+		reg_w(gspca_dev, 0x00, 0x0007);	/* (from win traces) */
+		reg_w(gspca_dev, 0x02, ZC3XX_R008_CLOCKSETTING);
 		break;
 	}
-	return 0;
+	return gspca_dev->usb_err;
 }
 
 /* called on streamoff with alt 0 and on disconnect */
@@ -6946,7 +6822,7 @@ static void sd_stop0(struct gspca_dev *gspca_dev)
 
 	if (!gspca_dev->present)
 		return;
-	send_unknown(gspca_dev->dev, sd->sensor);
+	send_unknown(gspca_dev, sd->sensor);
 }
 
 static void sd_pkt_scan(struct gspca_dev *gspca_dev,
@@ -6981,7 +6857,7 @@ static int sd_setbrightness(struct gspca_dev *gspca_dev, __s32 val)
 	sd->brightness = val;
 	if (gspca_dev->streaming)
 		setcontrast(gspca_dev);
-	return 0;
+	return gspca_dev->usb_err;
 }
 
 static int sd_getbrightness(struct gspca_dev *gspca_dev, __s32 *val)
@@ -6999,7 +6875,7 @@ static int sd_setcontrast(struct gspca_dev *gspca_dev, __s32 val)
 	sd->contrast = val;
 	if (gspca_dev->streaming)
 		setcontrast(gspca_dev);
-	return 0;
+	return gspca_dev->usb_err;
 }
 
 static int sd_getcontrast(struct gspca_dev *gspca_dev, __s32 *val)
@@ -7017,7 +6893,7 @@ static int sd_setautogain(struct gspca_dev *gspca_dev, __s32 val)
 	sd->autogain = val;
 	if (gspca_dev->streaming)
 		setautogain(gspca_dev);
-	return 0;
+	return gspca_dev->usb_err;
 }
 
 static int sd_getautogain(struct gspca_dev *gspca_dev, __s32 *val)
@@ -7035,7 +6911,7 @@ static int sd_setgamma(struct gspca_dev *gspca_dev, __s32 val)
 	sd->gamma = val;
 	if (gspca_dev->streaming)
 		setcontrast(gspca_dev);
-	return 0;
+	return gspca_dev->usb_err;
 }
 
 static int sd_getgamma(struct gspca_dev *gspca_dev, __s32 *val)
@@ -7053,7 +6929,7 @@ static int sd_setfreq(struct gspca_dev *gspca_dev, __s32 val)
 	sd->lightfreq = val;
 	if (gspca_dev->streaming)
 		setlightfreq(gspca_dev);
-	return 0;
+	return gspca_dev->usb_err;
 }
 
 static int sd_getfreq(struct gspca_dev *gspca_dev, __s32 *val)
@@ -7071,7 +6947,7 @@ static int sd_setsharpness(struct gspca_dev *gspca_dev, __s32 val)
 	sd->sharpness = val;
 	if (gspca_dev->streaming)
 		setsharpness(gspca_dev);
-	return 0;
+	return gspca_dev->usb_err;
 }
 
 static int sd_getsharpness(struct gspca_dev *gspca_dev, __s32 *val)
@@ -7116,7 +6992,7 @@ static int sd_set_jcomp(struct gspca_dev *gspca_dev,
 		sd->quality = jcomp->quality;
 	if (gspca_dev->streaming)
 		jpeg_set_qual(sd->jpeg_hdr, sd->quality);
-	return 0;
+	return gspca_dev->usb_err;
 }
 
 static int sd_get_jcomp(struct gspca_dev *gspca_dev,
@@ -7220,7 +7096,6 @@ static const __devinitdata struct usb_device_id device_table[] = {
 	{USB_DEVICE(0x10fd, 0x8050)},
 	{}			/* end of entry */
 };
-#undef DVNAME
 MODULE_DEVICE_TABLE(usb, device_table);
 
 /* -- device connect -- */

drivers/media/video/ivtv/ivtv-controls.c

@@ -17,163 +17,14 @@
     along with this program; if not, write to the Free Software
     Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
  */
-#include <linux/kernel.h>
-#include <linux/slab.h>
 
 #include "ivtv-driver.h"
-#include "ivtv-cards.h"
 #include "ivtv-ioctl.h"
-#include "ivtv-routing.h"
-#include "ivtv-i2c.h"
-#include "ivtv-mailbox.h"
 #include "ivtv-controls.h"
 
-/* Must be sorted from low to high control ID! */
-static const u32 user_ctrls[] = {
-	V4L2_CID_USER_CLASS,
-	V4L2_CID_BRIGHTNESS,
-	V4L2_CID_CONTRAST,
-	V4L2_CID_SATURATION,
-	V4L2_CID_HUE,
-	V4L2_CID_AUDIO_VOLUME,
-	V4L2_CID_AUDIO_BALANCE,
-	V4L2_CID_AUDIO_BASS,
-	V4L2_CID_AUDIO_TREBLE,
-	V4L2_CID_AUDIO_MUTE,
-	V4L2_CID_AUDIO_LOUDNESS,
-	0
-};
-
-static const u32 *ctrl_classes[] = {
-	user_ctrls,
-	cx2341x_mpeg_ctrls,
-	NULL
-};
-
-
-int ivtv_queryctrl(struct file *file, void *fh, struct v4l2_queryctrl *qctrl)
-{
-	struct ivtv *itv = ((struct ivtv_open_id *)fh)->itv;
-	const char *name;
-
-	qctrl->id = v4l2_ctrl_next(ctrl_classes, qctrl->id);
-	if (qctrl->id == 0)
-		return -EINVAL;
-
-	switch (qctrl->id) {
-	/* Standard V4L2 controls */
-	case V4L2_CID_USER_CLASS:
-		return v4l2_ctrl_query_fill(qctrl, 0, 0, 0, 0);
-	case V4L2_CID_BRIGHTNESS:
-	case V4L2_CID_HUE:
-	case V4L2_CID_SATURATION:
-	case V4L2_CID_CONTRAST:
-		if (v4l2_subdev_call(itv->sd_video, core, queryctrl, qctrl))
-			qctrl->flags |= V4L2_CTRL_FLAG_DISABLED;
-		return 0;
-
-	case V4L2_CID_AUDIO_VOLUME:
-	case V4L2_CID_AUDIO_MUTE:
-	case V4L2_CID_AUDIO_BALANCE:
-	case V4L2_CID_AUDIO_BASS:
-	case V4L2_CID_AUDIO_TREBLE:
-	case V4L2_CID_AUDIO_LOUDNESS:
-		if (v4l2_subdev_call(itv->sd_audio, core, queryctrl, qctrl))
-			qctrl->flags |= V4L2_CTRL_FLAG_DISABLED;
-		return 0;
-
-	default:
-		if (cx2341x_ctrl_query(&itv->params, qctrl))
-			qctrl->flags |= V4L2_CTRL_FLAG_DISABLED;
-		return 0;
-	}
-	strncpy(qctrl->name, name, sizeof(qctrl->name) - 1);
-	qctrl->name[sizeof(qctrl->name) - 1] = 0;
-	return 0;
-}
-
-int ivtv_querymenu(struct file *file, void *fh, struct v4l2_querymenu *qmenu)
-{
-	struct ivtv *itv = ((struct ivtv_open_id *)fh)->itv;
-	struct v4l2_queryctrl qctrl;
-
-	qctrl.id = qmenu->id;
-	ivtv_queryctrl(file, fh, &qctrl);
-	return v4l2_ctrl_query_menu(qmenu, &qctrl,
-			cx2341x_ctrl_get_menu(&itv->params, qmenu->id));
-}
-
-static int ivtv_try_ctrl(struct file *file, void *fh,
-					struct v4l2_ext_control *vctrl)
-{
-	struct v4l2_queryctrl qctrl;
-	const char **menu_items = NULL;
-	int err;
-
-	qctrl.id = vctrl->id;
-	err = ivtv_queryctrl(file, fh, &qctrl);
-	if (err)
-		return err;
-	if (qctrl.type == V4L2_CTRL_TYPE_MENU)
-		menu_items = v4l2_ctrl_get_menu(qctrl.id);
-	return v4l2_ctrl_check(vctrl, &qctrl, menu_items);
-}
-
-static int ivtv_s_ctrl(struct ivtv *itv, struct v4l2_control *vctrl)
-{
-	switch (vctrl->id) {
-		/* Standard V4L2 controls */
-	case V4L2_CID_BRIGHTNESS:
-	case V4L2_CID_HUE:
-	case V4L2_CID_SATURATION:
-	case V4L2_CID_CONTRAST:
-		return v4l2_subdev_call(itv->sd_video, core, s_ctrl, vctrl);
-
-	case V4L2_CID_AUDIO_VOLUME:
-	case V4L2_CID_AUDIO_MUTE:
-	case V4L2_CID_AUDIO_BALANCE:
-	case V4L2_CID_AUDIO_BASS:
-	case V4L2_CID_AUDIO_TREBLE:
-	case V4L2_CID_AUDIO_LOUDNESS:
-		return v4l2_subdev_call(itv->sd_audio, core, s_ctrl, vctrl);
-
-	default:
-		IVTV_DEBUG_IOCTL("invalid control 0x%x\n", vctrl->id);
-		return -EINVAL;
-	}
-	return 0;
-}
-
-static int ivtv_g_ctrl(struct ivtv *itv, struct v4l2_control *vctrl)
+static int ivtv_s_stream_vbi_fmt(struct cx2341x_handler *cxhdl, u32 fmt)
 {
-	switch (vctrl->id) {
-		/* Standard V4L2 controls */
-	case V4L2_CID_BRIGHTNESS:
-	case V4L2_CID_HUE:
-	case V4L2_CID_SATURATION:
-	case V4L2_CID_CONTRAST:
-		return v4l2_subdev_call(itv->sd_video, core, g_ctrl, vctrl);
-
-	case V4L2_CID_AUDIO_VOLUME:
-	case V4L2_CID_AUDIO_MUTE:
-	case V4L2_CID_AUDIO_BALANCE:
-	case V4L2_CID_AUDIO_BASS:
-	case V4L2_CID_AUDIO_TREBLE:
-	case V4L2_CID_AUDIO_LOUDNESS:
-		return v4l2_subdev_call(itv->sd_audio, core, g_ctrl, vctrl);
-	default:
-		IVTV_DEBUG_IOCTL("invalid control 0x%x\n", vctrl->id);
-		return -EINVAL;
-	}
-	return 0;
-}
-
-static int ivtv_setup_vbi_fmt(struct ivtv *itv, enum v4l2_mpeg_stream_vbi_fmt fmt)
-{
-	if (!(itv->v4l2_cap & V4L2_CAP_SLICED_VBI_CAPTURE))
-		return -EINVAL;
-	if (atomic_read(&itv->capturing) > 0)
-		return -EBUSY;
+	struct ivtv *itv = container_of(cxhdl, struct ivtv, cxhdl);
 
 	/* First try to allocate sliced VBI buffers if needed. */
 	if (fmt && itv->vbi.sliced_mpeg_data[0] == NULL) {
@@ -208,106 +59,43 @@ static int ivtv_setup_vbi_fmt(struct ivtv *itv, enum v4l2_mpeg_stream_vbi_fmt fm
 	return 0;
 }
 
-int ivtv_g_ext_ctrls(struct file *file, void *fh, struct v4l2_ext_controls *c)
+static int ivtv_s_video_encoding(struct cx2341x_handler *cxhdl, u32 val)
 {
-	struct ivtv *itv = ((struct ivtv_open_id *)fh)->itv;
-	struct v4l2_control ctrl;
-
-	if (c->ctrl_class == V4L2_CTRL_CLASS_USER) {
-		int i;
-		int err = 0;
-
-		for (i = 0; i < c->count; i++) {
-			ctrl.id = c->controls[i].id;
-			ctrl.value = c->controls[i].value;
-			err = ivtv_g_ctrl(itv, &ctrl);
-			c->controls[i].value = ctrl.value;
-			if (err) {
-				c->error_idx = i;
-				break;
-			}
-		}
-		return err;
-	}
-	if (c->ctrl_class == V4L2_CTRL_CLASS_MPEG)
-		return cx2341x_ext_ctrls(&itv->params, 0, c, VIDIOC_G_EXT_CTRLS);
-	return -EINVAL;
+	struct ivtv *itv = container_of(cxhdl, struct ivtv, cxhdl);
+	int is_mpeg1 = val == V4L2_MPEG_VIDEO_ENCODING_MPEG_1;
+	struct v4l2_mbus_framefmt fmt;
+
+	/* fix videodecoder resolution */
+	fmt.width = cxhdl->width / (is_mpeg1 ? 2 : 1);
+	fmt.height = cxhdl->height;
+	fmt.code = V4L2_MBUS_FMT_FIXED;
+	v4l2_subdev_call(itv->sd_video, video, s_mbus_fmt, &fmt);
+	return 0;
 }
 
-int ivtv_s_ext_ctrls(struct file *file, void *fh, struct v4l2_ext_controls *c)
+static int ivtv_s_audio_sampling_freq(struct cx2341x_handler *cxhdl, u32 idx)
 {
-	struct ivtv *itv = ((struct ivtv_open_id *)fh)->itv;
-	struct v4l2_control ctrl;
-
-	if (c->ctrl_class == V4L2_CTRL_CLASS_USER) {
-		int i;
-		int err = 0;
-
-		for (i = 0; i < c->count; i++) {
-			ctrl.id = c->controls[i].id;
-			ctrl.value = c->controls[i].value;
-			err = ivtv_s_ctrl(itv, &ctrl);
-			c->controls[i].value = ctrl.value;
-			if (err) {
-				c->error_idx = i;
-				break;
-			}
-		}
-		return err;
-	}
-	if (c->ctrl_class == V4L2_CTRL_CLASS_MPEG) {
-		static u32 freqs[3] = { 44100, 48000, 32000 };
-		struct cx2341x_mpeg_params p = itv->params;
-		int err = cx2341x_ext_ctrls(&p, atomic_read(&itv->capturing), c, VIDIOC_S_EXT_CTRLS);
-		unsigned idx;
-
-		if (err)
-			return err;
+	static const u32 freqs[3] = { 44100, 48000, 32000 };
+	struct ivtv *itv = container_of(cxhdl, struct ivtv, cxhdl);
 
-		if (p.video_encoding != itv->params.video_encoding) {
-			int is_mpeg1 = p.video_encoding ==
-				V4L2_MPEG_VIDEO_ENCODING_MPEG_1;
-			struct v4l2_mbus_framefmt fmt;
-
-			/* fix videodecoder resolution */
-			fmt.width = itv->params.width / (is_mpeg1 ? 2 : 1);
-			fmt.height = itv->params.height;
-			fmt.code = V4L2_MBUS_FMT_FIXED;
-			v4l2_subdev_call(itv->sd_video, video, s_mbus_fmt, &fmt);
-		}
-		err = cx2341x_update(itv, ivtv_api_func, &itv->params, &p);
-		if (!err && itv->params.stream_vbi_fmt != p.stream_vbi_fmt)
-			err = ivtv_setup_vbi_fmt(itv, p.stream_vbi_fmt);
-		itv->params = p;
-		itv->dualwatch_stereo_mode = p.audio_properties & 0x0300;
-		idx = p.audio_properties & 0x03;
-		/* The audio clock of the digitizer must match the codec sample
-		   rate otherwise you get some very strange effects. */
-		if (idx < ARRAY_SIZE(freqs))
-			ivtv_call_all(itv, audio, s_clock_freq, freqs[idx]);
-		return err;
-	}
-	return -EINVAL;
+	/* The audio clock of the digitizer must match the codec sample
+	   rate otherwise you get some very strange effects. */
+	if (idx < ARRAY_SIZE(freqs))
+		ivtv_call_all(itv, audio, s_clock_freq, freqs[idx]);
+	return 0;
 }
 
-int ivtv_try_ext_ctrls(struct file *file, void *fh, struct v4l2_ext_controls *c)
+static int ivtv_s_audio_mode(struct cx2341x_handler *cxhdl, u32 val)
 {
-	struct ivtv *itv = ((struct ivtv_open_id *)fh)->itv;
+	struct ivtv *itv = container_of(cxhdl, struct ivtv, cxhdl);
 
-	if (c->ctrl_class == V4L2_CTRL_CLASS_USER) {
-		int i;
-		int err = 0;
-
-		for (i = 0; i < c->count; i++) {
-			err = ivtv_try_ctrl(file, fh, &c->controls[i]);
-			if (err) {
-				c->error_idx = i;
-				break;
-			}
-		}
-		return err;
-	}
-	if (c->ctrl_class == V4L2_CTRL_CLASS_MPEG)
-		return cx2341x_ext_ctrls(&itv->params, atomic_read(&itv->capturing), c, VIDIOC_TRY_EXT_CTRLS);
-	return -EINVAL;
+	itv->dualwatch_stereo_mode = val;
+	return 0;
 }
+
+struct cx2341x_handler_ops ivtv_cxhdl_ops = {
+	.s_audio_mode = ivtv_s_audio_mode,
+	.s_audio_sampling_freq = ivtv_s_audio_sampling_freq,
+	.s_video_encoding = ivtv_s_video_encoding,
+	.s_stream_vbi_fmt = ivtv_s_stream_vbi_fmt,
+};

drivers/media/video/ivtv/ivtv-controls.h

@@ -21,10 +21,6 @@
 #ifndef IVTV_CONTROLS_H
 #define IVTV_CONTROLS_H
 
-int ivtv_queryctrl(struct file *file, void *fh, struct v4l2_queryctrl *a);
-int ivtv_g_ext_ctrls(struct file *file, void *fh, struct v4l2_ext_controls *a);
-int ivtv_s_ext_ctrls(struct file *file, void *fh, struct v4l2_ext_controls *a);
-int ivtv_try_ext_ctrls(struct file *file, void *fh, struct v4l2_ext_controls *a);
-int ivtv_querymenu(struct file *file, void *fh, struct v4l2_querymenu *a);
+extern struct cx2341x_handler_ops ivtv_cxhdl_ops;
 
 #endif

drivers/media/video/ivtv/ivtv-driver.c

@@ -53,6 +53,7 @@
 #include "ivtv-cards.h"
 #include "ivtv-vbi.h"
 #include "ivtv-routing.h"
+#include "ivtv-controls.h"
 #include "ivtv-gpio.h"
 
 #include <media/tveeprom.h>
@@ -734,9 +735,8 @@ static int __devinit ivtv_init_struct1(struct ivtv *itv)
 	itv->open_id = 1;
 
 	/* Initial settings */
-	cx2341x_fill_defaults(&itv->params);
-	itv->params.port = CX2341X_PORT_MEMORY;
-	itv->params.capabilities = CX2341X_CAP_HAS_SLICED_VBI;
+	itv->cxhdl.port = CX2341X_PORT_MEMORY;
+	itv->cxhdl.capabilities = CX2341X_CAP_HAS_SLICED_VBI;
 	init_waitqueue_head(&itv->eos_waitq);
 	init_waitqueue_head(&itv->event_waitq);
 	init_waitqueue_head(&itv->vsync_waitq);
@@ -1006,6 +1006,13 @@ static int __devinit ivtv_probe(struct pci_dev *pdev,
 		retval = -ENOMEM;
 		goto err;
 	}
+	retval = cx2341x_handler_init(&itv->cxhdl, 50);
+	if (retval)
+		goto err;
+	itv->v4l2_dev.ctrl_handler = &itv->cxhdl.hdl;
+	itv->cxhdl.ops = &ivtv_cxhdl_ops;
+	itv->cxhdl.priv = itv;
+	itv->cxhdl.func = ivtv_api_func;
 
 	IVTV_DEBUG_INFO("base addr: 0x%08x\n", itv->base_addr);
 
@@ -1127,7 +1134,7 @@ static int __devinit ivtv_probe(struct pci_dev *pdev,
 	itv->yuv_info.v4l2_src_w = itv->yuv_info.osd_full_w;
 	itv->yuv_info.v4l2_src_h = itv->yuv_info.osd_full_h;
 
-	itv->params.video_gop_size = itv->is_60hz ? 15 : 12;
+	cx2341x_handler_set_50hz(&itv->cxhdl, itv->is_50hz);
 
 	itv->stream_buf_size[IVTV_ENC_STREAM_TYPE_MPG] = 0x08000;
 	itv->stream_buf_size[IVTV_ENC_STREAM_TYPE_PCM] = 0x01200;
@@ -1269,15 +1276,8 @@ int ivtv_init_on_first_open(struct ivtv *itv)
 	IVTV_DEBUG_INFO("Getting firmware version..\n");
 	ivtv_firmware_versions(itv);
 
-	if (itv->card->hw_all & IVTV_HW_CX25840) {
-		struct v4l2_control ctrl;
-
+	if (itv->card->hw_all & IVTV_HW_CX25840)
 		v4l2_subdev_call(itv->sd_video, core, load_fw);
-		/* CX25840_CID_ENABLE_PVR150_WORKAROUND */
-		ctrl.id = V4L2_CID_PRIVATE_BASE;
-		ctrl.value = itv->pvr150_workaround;
-		v4l2_subdev_call(itv->sd_video, core, s_ctrl, &ctrl);
-	}
 
 	vf.tuner = 0;
 	vf.type = V4L2_TUNER_ANALOG_TV;
@@ -1329,6 +1329,8 @@ int ivtv_init_on_first_open(struct ivtv *itv)
 	/* For cards with video out, this call needs interrupts enabled */
 	ivtv_s_std(NULL, &fh, &itv->tuner_std);
 
+	/* Setup initial controls */
+	cx2341x_handler_setup(&itv->cxhdl);
 	return 0;
 }
 

drivers/media/video/ivtv/ivtv-driver.h

@@ -62,6 +62,7 @@
 #include <linux/dvb/audio.h>
 #include <media/v4l2-common.h>
 #include <media/v4l2-ioctl.h>
+#include <media/v4l2-ctrls.h>
 #include <media/v4l2-device.h>
 #include <media/v4l2-fh.h>
 #include <media/tuner.h>
@@ -631,6 +632,8 @@ struct ivtv {
 	struct ivtv_options options; 	/* user options */
 
 	struct v4l2_device v4l2_dev;
+	struct cx2341x_handler cxhdl;
+	struct v4l2_ctrl_handler hdl_gpio;
 	struct v4l2_subdev sd_gpio;	/* GPIO sub-device */
 	u16 instance;
 
@@ -648,7 +651,6 @@ struct ivtv {
 	v4l2_std_id std_out;            /* current TV output standard */
 	u8 audio_stereo_mode;           /* decoder setting how to handle stereo MPEG audio */
 	u8 audio_bilingual_mode;        /* decoder setting how to handle bilingual MPEG audio */
-	struct cx2341x_mpeg_params params;              /* current encoder parameters */
 
 
 	/* Locking */

drivers/media/video/ivtv/ivtv-fileops.c

@@ -150,12 +150,10 @@ void ivtv_release_stream(struct ivtv_stream *s)
 static void ivtv_dualwatch(struct ivtv *itv)
 {
 	struct v4l2_tuner vt;
-	u32 new_bitmap;
 	u32 new_stereo_mode;
-	const u32 stereo_mask = 0x0300;
-	const u32 dual = 0x0200;
+	const u32 dual = 0x02;
 
-	new_stereo_mode = itv->params.audio_properties & stereo_mask;
+	new_stereo_mode = v4l2_ctrl_g_ctrl(itv->cxhdl.audio_mode);
 	memset(&vt, 0, sizeof(vt));
 	ivtv_call_all(itv, tuner, g_tuner, &vt);
 	if (vt.audmode == V4L2_TUNER_MODE_LANG1_LANG2 && (vt.rxsubchans & V4L2_TUNER_SUB_LANG2))
@@ -164,16 +162,10 @@ static void ivtv_dualwatch(struct ivtv *itv)
 	if (new_stereo_mode == itv->dualwatch_stereo_mode)
 		return;
 
-	new_bitmap = new_stereo_mode | (itv->params.audio_properties & ~stereo_mask);
-
-	IVTV_DEBUG_INFO("dualwatch: change stereo flag from 0x%x to 0x%x. new audio_bitmask=0x%ux\n",
-			   itv->dualwatch_stereo_mode, new_stereo_mode, new_bitmap);
-
-	if (ivtv_vapi(itv, CX2341X_ENC_SET_AUDIO_PROPERTIES, 1, new_bitmap) == 0) {
-		itv->dualwatch_stereo_mode = new_stereo_mode;
-		return;
-	}
-	IVTV_DEBUG_INFO("dualwatch: changing stereo flag failed\n");
+	IVTV_DEBUG_INFO("dualwatch: change stereo flag from 0x%x to 0x%x.\n",
+			   itv->dualwatch_stereo_mode, new_stereo_mode);
+	if (v4l2_ctrl_s_ctrl(itv->cxhdl.audio_mode, new_stereo_mode))
+		IVTV_DEBUG_INFO("dualwatch: changing stereo flag failed\n");
 }
 
 static void ivtv_update_pgm_info(struct ivtv *itv)
@@ -894,7 +886,8 @@ int ivtv_v4l2_close(struct file *filp)
 		if (atomic_read(&itv->capturing) > 0) {
 			/* Undo video mute */
 			ivtv_vapi(itv, CX2341X_ENC_MUTE_VIDEO, 1,
-				itv->params.video_mute | (itv->params.video_mute_yuv << 8));
+				v4l2_ctrl_g_ctrl(itv->cxhdl.video_mute) |
+				(v4l2_ctrl_g_ctrl(itv->cxhdl.video_mute_yuv) << 8));
 		}
 		/* Done! Unmute and continue. */
 		ivtv_unmute(itv);

drivers/media/video/ivtv/ivtv-firmware.c

@@ -248,9 +248,9 @@ void ivtv_init_mpeg_decoder(struct ivtv *itv)
 	volatile u8 __iomem *mem_offset;
 
 	data[0] = 0;
-	data[1] = itv->params.width;	/* YUV source width */
-	data[2] = itv->params.height;
-	data[3] = itv->params.audio_properties;	/* Audio settings to use,
+	data[1] = itv->cxhdl.width;	/* YUV source width */
+	data[2] = itv->cxhdl.height;
+	data[3] = itv->cxhdl.audio_properties;	/* Audio settings to use,
 							   bitmap. see docs. */
 	if (ivtv_api(itv, CX2341X_DEC_SET_DECODER_SOURCE, 4, data)) {
 		IVTV_ERR("ivtv_init_mpeg_decoder failed to set decoder source\n");

drivers/media/video/ivtv/ivtv-gpio.c

@@ -24,6 +24,7 @@
 #include "ivtv-gpio.h"
 #include "tuner-xc2028.h"
 #include <media/tuner.h>
+#include <media/v4l2-ctrls.h>
 
 /*
  * GPIO assignment of Yuan MPG600/MPG160
@@ -149,16 +150,10 @@ static inline struct ivtv *sd_to_ivtv(struct v4l2_subdev *sd)
 	return container_of(sd, struct ivtv, sd_gpio);
 }
 
-static struct v4l2_queryctrl gpio_ctrl_mute = {
-	.id            = V4L2_CID_AUDIO_MUTE,
-	.type          = V4L2_CTRL_TYPE_BOOLEAN,
-	.name          = "Mute",
-	.minimum       = 0,
-	.maximum       = 1,
-	.step          = 1,
-	.default_value = 1,
-	.flags         = 0,
-};
+static inline struct v4l2_subdev *to_sd(struct v4l2_ctrl *ctrl)
+{
+	return &container_of(ctrl->handler, struct ivtv, hdl_gpio)->sd_gpio;
+}
 
 static int subdev_s_clock_freq(struct v4l2_subdev *sd, u32 freq)
 {
@@ -262,40 +257,24 @@ static int subdev_s_audio_routing(struct v4l2_subdev *sd,
 	return 0;
 }
 
-static int subdev_g_ctrl(struct v4l2_subdev *sd, struct v4l2_control *ctrl)
+static int subdev_s_ctrl(struct v4l2_ctrl *ctrl)
 {
+	struct v4l2_subdev *sd = to_sd(ctrl);
 	struct ivtv *itv = sd_to_ivtv(sd);
 	u16 mask, data;
 
-	if (ctrl->id != V4L2_CID_AUDIO_MUTE)
-		return -EINVAL;
-	mask = itv->card->gpio_audio_mute.mask;
-	data = itv->card->gpio_audio_mute.mute;
-	ctrl->value = (read_reg(IVTV_REG_GPIO_OUT) & mask) == data;
-	return 0;
-}
-
-static int subdev_s_ctrl(struct v4l2_subdev *sd, struct v4l2_control *ctrl)
-{
-	struct ivtv *itv = sd_to_ivtv(sd);
-	u16 mask, data;
-
-	if (ctrl->id != V4L2_CID_AUDIO_MUTE)
-		return -EINVAL;
-	mask = itv->card->gpio_audio_mute.mask;
-	data = ctrl->value ? itv->card->gpio_audio_mute.mute : 0;
-	if (mask)
-		write_reg((read_reg(IVTV_REG_GPIO_OUT) & ~mask) | (data & mask), IVTV_REG_GPIO_OUT);
-	return 0;
+	switch (ctrl->id) {
+	case V4L2_CID_AUDIO_MUTE:
+		mask = itv->card->gpio_audio_mute.mask;
+		data = ctrl->val ? itv->card->gpio_audio_mute.mute : 0;
+		if (mask)
+			write_reg((read_reg(IVTV_REG_GPIO_OUT) & ~mask) |
+					(data & mask), IVTV_REG_GPIO_OUT);
+		return 0;
+	}
+	return -EINVAL;
 }
 
-static int subdev_queryctrl(struct v4l2_subdev *sd, struct v4l2_queryctrl *qc)
-{
-	if (qc->id != V4L2_CID_AUDIO_MUTE)
-		return -EINVAL;
-	*qc = gpio_ctrl_mute;
-	return 0;
-}
 
 static int subdev_log_status(struct v4l2_subdev *sd)
 {
@@ -304,6 +283,7 @@ static int subdev_log_status(struct v4l2_subdev *sd)
 	IVTV_INFO("GPIO status: DIR=0x%04x OUT=0x%04x IN=0x%04x\n",
 			read_reg(IVTV_REG_GPIO_DIR), read_reg(IVTV_REG_GPIO_OUT),
 			read_reg(IVTV_REG_GPIO_IN));
+	v4l2_ctrl_handler_log_status(&itv->hdl_gpio, sd->name);
 	return 0;
 }
 
@@ -327,11 +307,19 @@ static int subdev_s_video_routing(struct v4l2_subdev *sd,
 	return 0;
 }
 
+static const struct v4l2_ctrl_ops gpio_ctrl_ops = {
+	.s_ctrl = subdev_s_ctrl,
+};
+
 static const struct v4l2_subdev_core_ops subdev_core_ops = {
 	.log_status = subdev_log_status,
-	.g_ctrl = subdev_g_ctrl,
-	.s_ctrl = subdev_s_ctrl,
-	.queryctrl = subdev_queryctrl,
+	.g_ext_ctrls = v4l2_subdev_g_ext_ctrls,
+	.try_ext_ctrls = v4l2_subdev_try_ext_ctrls,
+	.s_ext_ctrls = v4l2_subdev_s_ext_ctrls,
+	.g_ctrl = v4l2_subdev_g_ctrl,
+	.s_ctrl = v4l2_subdev_s_ctrl,
+	.queryctrl = v4l2_subdev_queryctrl,
+	.querymenu = v4l2_subdev_querymenu,
 };
 
 static const struct v4l2_subdev_tuner_ops subdev_tuner_ops = {
@@ -375,5 +363,12 @@ int ivtv_gpio_init(struct ivtv *itv)
 	v4l2_subdev_init(&itv->sd_gpio, &subdev_ops);
 	snprintf(itv->sd_gpio.name, sizeof(itv->sd_gpio.name), "%s-gpio", itv->v4l2_dev.name);
 	itv->sd_gpio.grp_id = IVTV_HW_GPIO;
+	v4l2_ctrl_handler_init(&itv->hdl_gpio, 1);
+	v4l2_ctrl_new_std(&itv->hdl_gpio, &gpio_ctrl_ops,
+			V4L2_CID_AUDIO_MUTE, 0, 1, 1, 0);
+	if (itv->hdl_gpio.error)
+		return itv->hdl_gpio.error;
+	itv->sd_gpio.ctrl_handler = &itv->hdl_gpio;
+	v4l2_ctrl_handler_setup(&itv->hdl_gpio);
 	return v4l2_device_register_subdev(&itv->v4l2_dev, &itv->sd_gpio);
 }

drivers/media/video/ivtv/ivtv-i2c.c

@@ -63,6 +63,7 @@
 #include "ivtv-cards.h"
 #include "ivtv-gpio.h"
 #include "ivtv-i2c.h"
+#include <media/cx25840.h>
 
 /* i2c implementation for cx23415/6 chip, ivtv project.
  * Author: Kevin Thayer (nufan_wfk at yahoo.com)
@@ -292,6 +293,12 @@ int ivtv_i2c_register(struct ivtv *itv, unsigned idx)
 	if (hw == IVTV_HW_UPD64031A || hw == IVTV_HW_UPD6408X) {
 		sd = v4l2_i2c_new_subdev(&itv->v4l2_dev,
 				adap, mod, type, 0, I2C_ADDRS(hw_addrs[idx]));
+	} else if (hw == IVTV_HW_CX25840) {
+		struct cx25840_platform_data pdata;
+
+		pdata.pvr150_workaround = itv->pvr150_workaround;
+		sd = v4l2_i2c_new_subdev_cfg(&itv->v4l2_dev,
+				adap, mod, type, 0, &pdata, hw_addrs[idx], NULL);
 	} else {
 		sd = v4l2_i2c_new_subdev(&itv->v4l2_dev,
 				adap, mod, type, hw_addrs[idx], NULL);

drivers/media/video/ivtv/ivtv-ioctl.c

@@ -162,7 +162,7 @@ int ivtv_set_speed(struct ivtv *itv, int speed)
 	data[0] |= (speed > 1000 || speed < -1500) ? 0x40000000 : 0;
 	data[1] = (speed < 0);
 	data[2] = speed < 0 ? 3 : 7;
-	data[3] = itv->params.video_b_frames;
+	data[3] = v4l2_ctrl_g_ctrl(itv->cxhdl.video_b_frames);
 	data[4] = (speed == 1500 || speed == 500) ? itv->speed_mute_audio : 0;
 	data[5] = 0;
 	data[6] = 0;
@@ -339,8 +339,8 @@ static int ivtv_g_fmt_vid_cap(struct file *file, void *fh, struct v4l2_format *f
 	struct ivtv *itv = id->itv;
 	struct v4l2_pix_format *pixfmt = &fmt->fmt.pix;
 
-	pixfmt->width = itv->params.width;
-	pixfmt->height = itv->params.height;
+	pixfmt->width = itv->cxhdl.width;
+	pixfmt->height = itv->cxhdl.height;
 	pixfmt->colorspace = V4L2_COLORSPACE_SMPTE170M;
 	pixfmt->field = V4L2_FIELD_INTERLACED;
 	pixfmt->priv = 0;
@@ -568,7 +568,6 @@ static int ivtv_s_fmt_vid_cap(struct file *file, void *fh, struct v4l2_format *f
 {
 	struct ivtv_open_id *id = fh;
 	struct ivtv *itv = id->itv;
-	struct cx2341x_mpeg_params *p = &itv->params;
 	struct v4l2_mbus_framefmt mbus_fmt;
 	int ret = ivtv_try_fmt_vid_cap(file, fh, fmt);
 	int w = fmt->fmt.pix.width;
@@ -577,15 +576,15 @@ static int ivtv_s_fmt_vid_cap(struct file *file, void *fh, struct v4l2_format *f
 	if (ret)
 		return ret;
 
-	if (p->width == w && p->height == h)
+	if (itv->cxhdl.width == w && itv->cxhdl.height == h)
 		return 0;
 
 	if (atomic_read(&itv->capturing) > 0)
 		return -EBUSY;
 
-	p->width = w;
-	p->height = h;
-	if (p->video_encoding == V4L2_MPEG_VIDEO_ENCODING_MPEG_1)
+	itv->cxhdl.width = w;
+	itv->cxhdl.height = h;
+	if (v4l2_ctrl_g_ctrl(itv->cxhdl.video_encoding) == V4L2_MPEG_VIDEO_ENCODING_MPEG_1)
 		fmt->fmt.pix.width /= 2;
 	mbus_fmt.width = fmt->fmt.pix.width;
 	mbus_fmt.height = h;
@@ -1114,9 +1113,10 @@ int ivtv_s_std(struct file *file, void *fh, v4l2_std_id *std)
 
 	itv->std = *std;
 	itv->is_60hz = (*std & V4L2_STD_525_60) ? 1 : 0;
-	itv->params.is_50hz = itv->is_50hz = !itv->is_60hz;
-	itv->params.width = 720;
-	itv->params.height = itv->is_50hz ? 576 : 480;
+	itv->is_50hz = !itv->is_60hz;
+	cx2341x_handler_set_50hz(&itv->cxhdl, itv->is_50hz);
+	itv->cxhdl.width = 720;
+	itv->cxhdl.height = itv->is_50hz ? 576 : 480;
 	itv->vbi.count = itv->is_50hz ? 18 : 12;
 	itv->vbi.start[0] = itv->is_50hz ? 6 : 10;
 	itv->vbi.start[1] = itv->is_50hz ? 318 : 273;
@@ -1157,7 +1157,7 @@ int ivtv_s_std(struct file *file, void *fh, v4l2_std_id *std)
 		ivtv_vapi(itv, CX2341X_DEC_SET_STANDARD, 1, itv->is_out_50hz);
 		itv->main_rect.left = itv->main_rect.top = 0;
 		itv->main_rect.width = 720;
-		itv->main_rect.height = itv->params.height;
+		itv->main_rect.height = itv->cxhdl.height;
 		ivtv_vapi(itv, CX2341X_OSD_SET_FRAMEBUFFER_WINDOW, 4,
 			720, itv->main_rect.height, 0, 0);
 		yi->main_rect = itv->main_rect;
@@ -1554,7 +1554,7 @@ static int ivtv_log_status(struct file *file, void *fh)
 	}
 	IVTV_INFO("Tuner:  %s\n",
 		test_bit(IVTV_F_I_RADIO_USER, &itv->i_flags) ? "Radio" : "TV");
-	cx2341x_log_status(&itv->params, itv->v4l2_dev.name);
+	v4l2_ctrl_handler_log_status(&itv->cxhdl.hdl, itv->v4l2_dev.name);
 	IVTV_INFO("Status flags:    0x%08lx\n", itv->i_flags);
 	for (i = 0; i < IVTV_MAX_STREAMS; i++) {
 		struct ivtv_stream *s = &itv->streams[i];
@@ -1942,11 +1942,6 @@ static const struct v4l2_ioctl_ops ivtv_ioctl_ops = {
 	.vidioc_s_register 		    = ivtv_s_register,
 #endif
 	.vidioc_default 		    = ivtv_default,
-	.vidioc_queryctrl 		    = ivtv_queryctrl,
-	.vidioc_querymenu 		    = ivtv_querymenu,
-	.vidioc_g_ext_ctrls 		    = ivtv_g_ext_ctrls,
-	.vidioc_s_ext_ctrls 		    = ivtv_s_ext_ctrls,
-	.vidioc_try_ext_ctrls    	    = ivtv_try_ext_ctrls,
 	.vidioc_subscribe_event 	    = ivtv_subscribe_event,
 	.vidioc_unsubscribe_event 	    = v4l2_event_unsubscribe,
 };

drivers/media/video/ivtv/ivtv-streams.c

@@ -210,6 +210,7 @@ static int ivtv_prep_dev(struct ivtv *itv, int type)
 
 	s->vdev->num = num;
 	s->vdev->v4l2_dev = &itv->v4l2_dev;
+	s->vdev->ctrl_handler = itv->v4l2_dev.ctrl_handler;
 	s->vdev->fops = ivtv_stream_info[type].fops;
 	s->vdev->release = video_device_release;
 	s->vdev->tvnorms = V4L2_STD_ALL;
@@ -451,7 +452,6 @@ int ivtv_start_v4l2_encode_stream(struct ivtv_stream *s)
 {
 	u32 data[CX2341X_MBOX_MAX_DATA];
 	struct ivtv *itv = s->itv;
-	struct cx2341x_mpeg_params *p = &itv->params;
 	int captype = 0, subtype = 0;
 	int enable_passthrough = 0;
 
@@ -472,7 +472,7 @@ int ivtv_start_v4l2_encode_stream(struct ivtv_stream *s)
 		}
 		itv->mpg_data_received = itv->vbi_data_inserted = 0;
 		itv->dualwatch_jiffies = jiffies;
-		itv->dualwatch_stereo_mode = p->audio_properties & 0x0300;
+		itv->dualwatch_stereo_mode = v4l2_ctrl_g_ctrl(itv->cxhdl.audio_mode);
 		itv->search_pack_header = 0;
 		break;
 
@@ -560,12 +560,12 @@ int ivtv_start_v4l2_encode_stream(struct ivtv_stream *s)
 				itv->pgm_info_offset, itv->pgm_info_num);
 
 		/* Setup API for Stream */
-		cx2341x_update(itv, ivtv_api_func, NULL, p);
+		cx2341x_handler_setup(&itv->cxhdl);
 
 		/* mute if capturing radio */
 		if (test_bit(IVTV_F_I_RADIO_USER, &itv->i_flags))
 			ivtv_vapi(itv, CX2341X_ENC_MUTE_VIDEO, 1,
-				1 | (p->video_mute_yuv << 8));
+				1 | (v4l2_ctrl_g_ctrl(itv->cxhdl.video_mute_yuv) << 8));
 	}
 
 	/* Vsync Setup */
@@ -581,6 +581,8 @@ int ivtv_start_v4l2_encode_stream(struct ivtv_stream *s)
 
 		clear_bit(IVTV_F_I_EOS, &itv->i_flags);
 
+		cx2341x_handler_set_busy(&itv->cxhdl, 1);
+
 		/* Initialize Digitizer for Capture */
 		/* Avoid tinny audio problem - ensure audio clocks are going */
 		v4l2_subdev_call(itv->sd_audio, audio, s_stream, 1);
@@ -617,7 +619,6 @@ static int ivtv_setup_v4l2_decode_stream(struct ivtv_stream *s)
 {
 	u32 data[CX2341X_MBOX_MAX_DATA];
 	struct ivtv *itv = s->itv;
-	struct cx2341x_mpeg_params *p = &itv->params;
 	int datatype;
 	u16 width;
 	u16 height;
@@ -627,8 +628,8 @@ static int ivtv_setup_v4l2_decode_stream(struct ivtv_stream *s)
 
 	IVTV_DEBUG_INFO("Setting some initial decoder settings\n");
 
-	width = p->width;
-	height = p->height;
+	width = itv->cxhdl.width;
+	height = itv->cxhdl.height;
 
 	/* set audio mode to left/stereo  for dual/stereo mode. */
 	ivtv_vapi(itv, CX2341X_DEC_SET_AUDIO_MODE, 2, itv->audio_bilingual_mode, itv->audio_stereo_mode);
@@ -668,7 +669,7 @@ static int ivtv_setup_v4l2_decode_stream(struct ivtv_stream *s)
 		break;
 	}
 	if (ivtv_vapi(itv, CX2341X_DEC_SET_DECODER_SOURCE, 4, datatype,
-			width, height, p->audio_properties)) {
+			width, height, itv->cxhdl.audio_properties)) {
 		IVTV_DEBUG_WARN("Couldn't initialize decoder source\n");
 	}
 
@@ -847,6 +848,8 @@ int ivtv_stop_v4l2_encode_stream(struct ivtv_stream *s, int gop_end)
 		return 0;
 	}
 
+	cx2341x_handler_set_busy(&itv->cxhdl, 0);
+
 	/* Set the following Interrupt mask bits for capture */
 	ivtv_set_irq_mask(itv, IVTV_IRQ_MASK_CAPTURE);
 	del_timer(&itv->dma_timer);
@@ -967,7 +970,8 @@ int ivtv_passthrough_mode(struct ivtv *itv, int enable)
 
 		/* Setup capture if not already done */
 		if (atomic_read(&itv->capturing) == 0) {
-			cx2341x_update(itv, ivtv_api_func, NULL, &itv->params);
+			cx2341x_handler_setup(&itv->cxhdl);
+			cx2341x_handler_set_busy(&itv->cxhdl, 1);
 		}
 
 		/* Start Passthrough Mode */
@@ -988,6 +992,8 @@ int ivtv_passthrough_mode(struct ivtv *itv, int enable)
 	clear_bit(IVTV_F_S_PASSTHROUGH, &dec_stream->s_flags);
 	clear_bit(IVTV_F_S_STREAMING, &dec_stream->s_flags);
 	itv->output_mode = OUT_NONE;
+	if (atomic_read(&itv->capturing) == 0)
+		cx2341x_handler_set_busy(&itv->cxhdl, 0);
 
 	return 0;
 }

drivers/media/video/msp3400-driver.c

@@ -283,51 +283,6 @@ void msp_set_scart(struct i2c_client *client, int in, int out)
 		msp_write_dem(client, 0x40, state->i2s_mode);
 }
 
-void msp_set_audio(struct i2c_client *client)
-{
-	struct msp_state *state = to_state(i2c_get_clientdata(client));
-	int bal = 0, bass, treble, loudness;
-	int val = 0;
-	int reallymuted = state->muted | state->scan_in_progress;
-
-	if (!reallymuted)
-		val = (state->volume * 0x7f / 65535) << 8;
-
-	v4l_dbg(1, msp_debug, client, "mute=%s scanning=%s volume=%d\n",
-		state->muted ? "on" : "off",
-		state->scan_in_progress ? "yes" : "no",
-		state->volume);
-
-	msp_write_dsp(client, 0x0000, val);
-	msp_write_dsp(client, 0x0007, reallymuted ? 0x1 : (val | 0x1));
-	if (state->has_scart2_out_volume)
-		msp_write_dsp(client, 0x0040, reallymuted ? 0x1 : (val | 0x1));
-	if (state->has_headphones)
-		msp_write_dsp(client, 0x0006, val);
-	if (!state->has_sound_processing)
-		return;
-
-	if (val)
-		bal = (u8)((state->balance / 256) - 128);
-	bass = ((state->bass - 32768) * 0x60 / 65535) << 8;
-	treble = ((state->treble - 32768) * 0x60 / 65535) << 8;
-	loudness = state->loudness ? ((5 * 4) << 8) : 0;
-
-	v4l_dbg(1, msp_debug, client, "balance=%d bass=%d treble=%d loudness=%d\n",
-		state->balance, state->bass, state->treble, state->loudness);
-
-	msp_write_dsp(client, 0x0001, bal << 8);
-	msp_write_dsp(client, 0x0002, bass);
-	msp_write_dsp(client, 0x0003, treble);
-	msp_write_dsp(client, 0x0004, loudness);
-	if (!state->has_headphones)
-		return;
-	msp_write_dsp(client, 0x0030, bal << 8);
-	msp_write_dsp(client, 0x0031, bass);
-	msp_write_dsp(client, 0x0032, treble);
-	msp_write_dsp(client, 0x0033, loudness);
-}
-
 /* ------------------------------------------------------------------------ */
 
 static void msp_wake_thread(struct i2c_client *client)
@@ -363,98 +318,73 @@ int msp_sleep(struct msp_state *state, int timeout)
 
 /* ------------------------------------------------------------------------ */
 
-static int msp_g_ctrl(struct v4l2_subdev *sd, struct v4l2_control *ctrl)
+static int msp_s_ctrl(struct v4l2_ctrl *ctrl)
 {
-	struct msp_state *state = to_state(sd);
+	struct msp_state *state = ctrl_to_state(ctrl);
+	struct i2c_client *client = v4l2_get_subdevdata(&state->sd);
+	int val = ctrl->val;
 
 	switch (ctrl->id) {
-	case V4L2_CID_AUDIO_VOLUME:
-		ctrl->value = state->volume;
-		break;
-
-	case V4L2_CID_AUDIO_MUTE:
-		ctrl->value = state->muted;
-		break;
-
-	case V4L2_CID_AUDIO_BALANCE:
-		if (!state->has_sound_processing)
-			return -EINVAL;
-		ctrl->value = state->balance;
-		break;
-
-	case V4L2_CID_AUDIO_BASS:
-		if (!state->has_sound_processing)
-			return -EINVAL;
-		ctrl->value = state->bass;
+	case V4L2_CID_AUDIO_VOLUME: {
+		/* audio volume cluster */
+		int reallymuted = state->muted->val | state->scan_in_progress;
+
+		if (!reallymuted)
+			val = (val * 0x7f / 65535) << 8;
+
+		v4l_dbg(1, msp_debug, client, "mute=%s scanning=%s volume=%d\n",
+				state->muted->val ? "on" : "off",
+				state->scan_in_progress ? "yes" : "no",
+				state->volume->val);
+
+		msp_write_dsp(client, 0x0000, val);
+		msp_write_dsp(client, 0x0007, reallymuted ? 0x1 : (val | 0x1));
+		if (state->has_scart2_out_volume)
+			msp_write_dsp(client, 0x0040, reallymuted ? 0x1 : (val | 0x1));
+		if (state->has_headphones)
+			msp_write_dsp(client, 0x0006, val);
 		break;
-
-	case V4L2_CID_AUDIO_TREBLE:
-		if (!state->has_sound_processing)
-			return -EINVAL;
-		ctrl->value = state->treble;
-		break;
-
-	case V4L2_CID_AUDIO_LOUDNESS:
-		if (!state->has_sound_processing)
-			return -EINVAL;
-		ctrl->value = state->loudness;
-		break;
-
-	default:
-		return -EINVAL;
 	}
-	return 0;
-}
-
-static int msp_s_ctrl(struct v4l2_subdev *sd, struct v4l2_control *ctrl)
-{
-	struct msp_state *state = to_state(sd);
-	struct i2c_client *client = v4l2_get_subdevdata(sd);
-
-	switch (ctrl->id) {
-	case V4L2_CID_AUDIO_VOLUME:
-		state->volume = ctrl->value;
-		if (state->volume == 0)
-			state->balance = 32768;
-		break;
-
-	case V4L2_CID_AUDIO_MUTE:
-		if (ctrl->value < 0 || ctrl->value >= 2)
-			return -ERANGE;
-		state->muted = ctrl->value;
-		break;
 
 	case V4L2_CID_AUDIO_BASS:
-		if (!state->has_sound_processing)
-			return -EINVAL;
-		state->bass = ctrl->value;
+		val = ((val - 32768) * 0x60 / 65535) << 8;
+		msp_write_dsp(client, 0x0002, val);
+		if (state->has_headphones)
+			msp_write_dsp(client, 0x0031, val);
 		break;
 
 	case V4L2_CID_AUDIO_TREBLE:
-		if (!state->has_sound_processing)
-			return -EINVAL;
-		state->treble = ctrl->value;
+		val = ((val - 32768) * 0x60 / 65535) << 8;
+		msp_write_dsp(client, 0x0003, val);
+		if (state->has_headphones)
+			msp_write_dsp(client, 0x0032, val);
 		break;
 
 	case V4L2_CID_AUDIO_LOUDNESS:
-		if (!state->has_sound_processing)
-			return -EINVAL;
-		state->loudness = ctrl->value;
+		val = val ? ((5 * 4) << 8) : 0;
+		msp_write_dsp(client, 0x0004, val);
+		if (state->has_headphones)
+			msp_write_dsp(client, 0x0033, val);
 		break;
 
 	case V4L2_CID_AUDIO_BALANCE:
-		if (!state->has_sound_processing)
-			return -EINVAL;
-		state->balance = ctrl->value;
+		val = (u8)((val / 256) - 128);
+		msp_write_dsp(client, 0x0001, val << 8);
+		if (state->has_headphones)
+			msp_write_dsp(client, 0x0030, val << 8);
 		break;
 
 	default:
 		return -EINVAL;
 	}
-	msp_set_audio(client);
 	return 0;
 }
 
+void msp_update_volume(struct msp_state *state)
+{
+	v4l2_ctrl_s_ctrl(state->volume, v4l2_ctrl_g_ctrl(state->volume));
+}
+
 /* --- v4l2 ioctls --- */
 static int msp_s_radio(struct v4l2_subdev *sd)
 {
@@ -472,7 +402,7 @@ static int msp_s_radio(struct v4l2_subdev *sd)
 		msp3400c_set_mode(client, MSP_MODE_FM_RADIO);
 		msp3400c_set_carrier(client, MSP_CARRIER(10.7),
 				MSP_CARRIER(10.7));
-		msp_set_audio(client);
+		msp_update_volume(state);
 		break;
 	case OPMODE_AUTODETECT:
 	case OPMODE_AUTOSELECT:
@@ -592,33 +522,6 @@ static int msp_s_i2s_clock_freq(struct v4l2_subdev *sd, u32 freq)
 	return 0;
 }
 
-static int msp_queryctrl(struct v4l2_subdev *sd, struct v4l2_queryctrl *qc)
-{
-	struct msp_state *state = to_state(sd);
-
-	switch (qc->id) {
-	case V4L2_CID_AUDIO_VOLUME:
-		return v4l2_ctrl_query_fill(qc, 0, 65535, 65535 / 100, 58880);
-	case V4L2_CID_AUDIO_MUTE:
-		return v4l2_ctrl_query_fill(qc, 0, 1, 1, 0);
-	default:
-		break;
-	}
-	if (!state->has_sound_processing)
-		return -EINVAL;
-	switch (qc->id) {
-	case V4L2_CID_AUDIO_LOUDNESS:
-		return v4l2_ctrl_query_fill(qc, 0, 1, 1, 0);
-	case V4L2_CID_AUDIO_BALANCE:
-	case V4L2_CID_AUDIO_BASS:
-	case V4L2_CID_AUDIO_TREBLE:
-		return v4l2_ctrl_query_fill(qc, 0, 65535, 65535 / 100, 32768);
-	default:
-		return -EINVAL;
-	}
-	return 0;
-}
-
 static int msp_g_chip_ident(struct v4l2_subdev *sd, struct v4l2_dbg_chip_ident *chip)
 {
 	struct msp_state *state = to_state(sd);
@@ -633,19 +536,14 @@ static int msp_log_status(struct v4l2_subdev *sd)
 	struct msp_state *state = to_state(sd);
 	struct i2c_client *client = v4l2_get_subdevdata(sd);
 	const char *p;
+	char prefix[V4L2_SUBDEV_NAME_SIZE + 20];
 
 	if (state->opmode == OPMODE_AUTOSELECT)
 		msp_detect_stereo(client);
 	v4l_info(client, "%s rev1 = 0x%04x rev2 = 0x%04x\n",
 			client->name, state->rev1, state->rev2);
-	v4l_info(client, "Audio:    volume %d%s\n",
-			state->volume, state->muted ? " (muted)" : "");
-	if (state->has_sound_processing) {
-		v4l_info(client, "Audio:    balance %d bass %d treble %d loudness %s\n",
-				state->balance, state->bass,
-				state->treble,
-				state->loudness ? "on" : "off");
-	}
+	snprintf(prefix, sizeof(prefix), "%s: Audio:    ", sd->name);
+	v4l2_ctrl_handler_log_status(&state->hdl, prefix);
 	switch (state->mode) {
 		case MSP_MODE_AM_DETECT: p = "AM (for carrier detect)"; break;
 		case MSP_MODE_FM_RADIO: p = "FM Radio"; break;
@@ -695,12 +593,20 @@ static int msp_resume(struct i2c_client *client)
 
 /* ----------------------------------------------------------------------- */
 
+static const struct v4l2_ctrl_ops msp_ctrl_ops = {
+	.s_ctrl = msp_s_ctrl,
+};
+
 static const struct v4l2_subdev_core_ops msp_core_ops = {
 	.log_status = msp_log_status,
 	.g_chip_ident = msp_g_chip_ident,
-	.g_ctrl = msp_g_ctrl,
-	.s_ctrl = msp_s_ctrl,
-	.queryctrl = msp_queryctrl,
+	.g_ext_ctrls = v4l2_subdev_g_ext_ctrls,
+	.try_ext_ctrls = v4l2_subdev_try_ext_ctrls,
+	.s_ext_ctrls = v4l2_subdev_s_ext_ctrls,
+	.g_ctrl = v4l2_subdev_g_ctrl,
+	.s_ctrl = v4l2_subdev_s_ctrl,
+	.queryctrl = v4l2_subdev_queryctrl,
+	.querymenu = v4l2_subdev_querymenu,
 	.s_std = msp_s_std,
 };
 
@@ -728,6 +634,7 @@ static int msp_probe(struct i2c_client *client, const struct i2c_device_id *id)
 {
 	struct msp_state *state;
 	struct v4l2_subdev *sd;
+	struct v4l2_ctrl_handler *hdl;
 	int (*thread_func)(void *data) = NULL;
 	int msp_hard;
 	int msp_family;
@@ -752,13 +659,7 @@ static int msp_probe(struct i2c_client *client, const struct i2c_device_id *id)
 
 	state->v4l2_std = V4L2_STD_NTSC;
 	state->audmode = V4L2_TUNER_MODE_STEREO;
-	state->volume = 58880;	/* 0db gain */
-	state->balance = 32768;	/* 0db gain */
-	state->bass = 32768;
-	state->treble = 32768;
-	state->loudness = 0;
 	state->input = -1;
-	state->muted = 0;
 	state->i2s_mode = 0;
 	init_waitqueue_head(&state->wq);
 	/* These are the reset input/output positions */
@@ -777,8 +678,6 @@ static int msp_probe(struct i2c_client *client, const struct i2c_device_id *id)
 		return -ENODEV;
 	}
 
-	msp_set_audio(client);
-
 	msp_family = ((state->rev1 >> 4) & 0x0f) + 3;
 	msp_product = (state->rev2 >> 8) & 0xff;
 	msp_prod_hi = msp_product / 10;
@@ -849,6 +748,34 @@ static int msp_probe(struct i2c_client *client, const struct i2c_device_id *id)
 			state->opmode = OPMODE_MANUAL;
 	}
 
+	hdl = &state->hdl;
+	v4l2_ctrl_handler_init(hdl, 6);
+	if (state->has_sound_processing) {
+		v4l2_ctrl_new_std(hdl, &msp_ctrl_ops,
+			V4L2_CID_AUDIO_BASS, 0, 65535, 65535 / 100, 32768);
+		v4l2_ctrl_new_std(hdl, &msp_ctrl_ops,
+			V4L2_CID_AUDIO_TREBLE, 0, 65535, 65535 / 100, 32768);
+		v4l2_ctrl_new_std(hdl, &msp_ctrl_ops,
+			V4L2_CID_AUDIO_LOUDNESS, 0, 1, 1, 0);
+	}
+	state->volume = v4l2_ctrl_new_std(hdl, &msp_ctrl_ops,
+			V4L2_CID_AUDIO_VOLUME, 0, 65535, 65535 / 100, 58880);
+	v4l2_ctrl_new_std(hdl, &msp_ctrl_ops,
+			V4L2_CID_AUDIO_BALANCE, 0, 65535, 65535 / 100, 32768);
+	state->muted = v4l2_ctrl_new_std(hdl, &msp_ctrl_ops,
+			V4L2_CID_AUDIO_MUTE, 0, 1, 1, 0);
+	sd->ctrl_handler = hdl;
+	if (hdl->error) {
+		int err = hdl->error;
+
+		v4l2_ctrl_handler_free(hdl);
+		kfree(state);
+		return err;
+	}
+
+	v4l2_ctrl_cluster(2, &state->volume);
+	v4l2_ctrl_handler_setup(hdl);
+
 	/* hello world :-) */
 	v4l_info(client, "MSP%d4%02d%c-%c%d found @ 0x%x (%s)\n",
 			msp_family, msp_product,
@@ -903,6 +830,7 @@ static int msp_remove(struct i2c_client *client)
 	}
 	msp_reset(client);
 
+	v4l2_ctrl_handler_free(&state->hdl);
 	kfree(state);
 	return 0;
 }

drivers/media/video/msp3400-driver.h

@@ -6,6 +6,7 @@
 
 #include <media/msp3400.h>
 #include <media/v4l2-device.h>
+#include <media/v4l2-ctrls.h>
 
 /* ---------------------------------------------------------------------- */
 
@@ -51,6 +52,7 @@ extern int msp_stereo_thresh;
 
 struct msp_state {
 	struct v4l2_subdev sd;
+	struct v4l2_ctrl_handler hdl;
 	int rev1, rev2;
 	int ident;
 	u8 has_nicam;
@@ -87,9 +89,12 @@ struct msp_state {
 	int audmode;
 	int rxsubchans;
 
-	int volume, muted;
-	int balance, loudness;
-	int bass, treble;
+	struct {
+		/* volume cluster */
+		struct v4l2_ctrl *volume;
+		struct v4l2_ctrl *muted;
+	};
+
 	int scan_in_progress;
 
 	/* thread */
@@ -104,6 +109,11 @@ static inline struct msp_state *to_state(struct v4l2_subdev *sd)
 	return container_of(sd, struct msp_state, sd);
 }
 
+static inline struct msp_state *ctrl_to_state(struct v4l2_ctrl *ctrl)
+{
+	return container_of(ctrl->handler, struct msp_state, hdl);
+}
+
 /* msp3400-driver.c */
 int msp_write_dem(struct i2c_client *client, int addr, int val);
 int msp_write_dsp(struct i2c_client *client, int addr, int val);
@@ -111,7 +121,7 @@ int msp_read_dem(struct i2c_client *client, int addr);
 int msp_read_dsp(struct i2c_client *client, int addr);
 int msp_reset(struct i2c_client *client);
 void msp_set_scart(struct i2c_client *client, int in, int out);
-void msp_set_audio(struct i2c_client *client);
+void msp_update_volume(struct msp_state *state);
 int msp_sleep(struct msp_state *state, int timeout);
 
 /* msp3400-kthreads.c */

drivers/media/video/msp3400-kthreads.c

@@ -496,13 +496,13 @@ restart:
 			v4l_dbg(1, msp_debug, client,
 				"thread: no carrier scan\n");
 			state->scan_in_progress = 0;
-			msp_set_audio(client);
+			msp_update_volume(state);
 			continue;
 		}
 
 		/* mute audio */
 		state->scan_in_progress = 1;
-		msp_set_audio(client);
+		msp_update_volume(state);
 
 		msp3400c_set_mode(client, MSP_MODE_AM_DETECT);
 		val1 = val2 = 0;
@@ -634,7 +634,7 @@ no_second:
 		/* unmute */
 		state->scan_in_progress = 0;
 		msp3400c_set_audmode(client);
-		msp_set_audio(client);
+		msp_update_volume(state);
 
 		if (msp_debug)
 			msp3400c_print_mode(client);
@@ -679,13 +679,13 @@ restart:
 			v4l_dbg(1, msp_debug, client,
 				"thread: no carrier scan\n");
 			state->scan_in_progress = 0;
-			msp_set_audio(client);
+			msp_update_volume(state);
 			continue;
 		}
 
 		/* mute audio */
 		state->scan_in_progress = 1;
-		msp_set_audio(client);
+		msp_update_volume(state);
 
 		/* start autodetect. Note: autodetect is not supported for
 		   NTSC-M and radio, hence we force the standard in those
@@ -797,7 +797,7 @@ restart:
 		/* unmute */
 		msp3400c_set_audmode(client);
 		state->scan_in_progress = 0;
-		msp_set_audio(client);
+		msp_update_volume(state);
 
 		/* monitor tv audio mode, the first time don't wait
 		   so long to get a quick stereo/bilingual result */
@@ -974,7 +974,7 @@ restart:
 			v4l_dbg(1, msp_debug, client,
 				"thread: no carrier scan\n");
 			state->scan_in_progress = 0;
-			msp_set_audio(client);
+			msp_update_volume(state);
 			continue;
 		}
 
@@ -1020,7 +1020,7 @@ unmute:
 		}
 
 		/* unmute: dispatch sound to scart output, set scart volume */
-		msp_set_audio(client);
+		msp_update_volume(state);
 
 		/* restore ACB */
 		if (msp_write_dsp(client, 0x13, state->acb))

drivers/media/video/mt9m111.c

@@ -1,5 +1,5 @@
 /*
- * Driver for MT9M111/MT9M112 CMOS Image Sensor from Micron
+ * Driver for MT9M111/MT9M112/MT9M131 CMOS Image Sensor from Micron/Aptina
  *
  * Copyright (C) 2008, Robert Jarzmik <robert.jarzmik@free.fr>
  *
@@ -19,11 +19,14 @@
 #include <media/soc_camera.h>
 
 /*
- * mt9m111 and mt9m112 i2c address is 0x5d or 0x48 (depending on SAddr pin)
+ * MT9M111, MT9M112 and MT9M131:
+ * i2c address is 0x48 or 0x5d (depending on SADDR pin)
  * The platform has to define i2c_board_info and call i2c_register_board_info()
  */
 
-/* mt9m111: Sensor register addresses */
+/*
+ * Sensor core register addresses (0x000..0x0ff)
+ */
 #define MT9M111_CHIP_VERSION		0x000
 #define MT9M111_ROW_START		0x001
 #define MT9M111_COLUMN_START		0x002
@@ -72,8 +75,9 @@
 #define MT9M111_CTXT_CTRL_LED_FLASH_EN	(1 << 2)
 #define MT9M111_CTXT_CTRL_VBLANK_SEL_B	(1 << 1)
 #define MT9M111_CTXT_CTRL_HBLANK_SEL_B	(1 << 0)
+
 /*
- * mt9m111: Colorpipe register addresses (0x100..0x1ff)
+ * Colorpipe register addresses (0x100..0x1ff)
  */
 #define MT9M111_OPER_MODE_CTRL		0x106
 #define MT9M111_OUTPUT_FORMAT_CTRL	0x108
@@ -109,8 +113,9 @@
 #define MT9M111_OUTFMT_SWAP_YCbCr_C_Y	(1 << 1)
 #define MT9M111_OUTFMT_SWAP_RGB_EVEN	(1 << 1)
 #define MT9M111_OUTFMT_SWAP_YCbCr_Cb_Cr	(1 << 0)
+
 /*
- * mt9m111: Camera control register addresses (0x200..0x2ff not implemented)
+ * Camera control register addresses (0x200..0x2ff not implemented)
  */
 
 #define reg_read(reg) mt9m111_reg_read(client, MT9M111_##reg)
@@ -160,7 +165,8 @@ enum mt9m111_context {
 
 struct mt9m111 {
 	struct v4l2_subdev subdev;
-	int model;	/* V4L2_IDENT_MT9M11x* codes from v4l2-chip-ident.h */
+	int model;	/* V4L2_IDENT_MT9M111 or V4L2_IDENT_MT9M112 code
+			 * from v4l2-chip-ident.h */
 	enum mt9m111_context context;
 	struct v4l2_rect rect;
 	const struct mt9m111_datafmt *fmt;
@@ -934,7 +940,7 @@ static int mt9m111_init(struct i2c_client *client)
 	if (!ret)
 		ret = mt9m111_set_autoexposure(client, mt9m111->autoexposure);
 	if (ret)
-		dev_err(&client->dev, "mt9m11x init failed: %d\n", ret);
+		dev_err(&client->dev, "mt9m111 init failed: %d\n", ret);
 	return ret;
 }
 
@@ -963,27 +969,27 @@ static int mt9m111_video_probe(struct soc_camera_device *icd,
 	mt9m111->swap_rgb_even_odd = 1;
 	mt9m111->swap_rgb_red_blue = 1;
 
-	ret = mt9m111_init(client);
-	if (ret)
-		goto ei2c;
-
 	data = reg_read(CHIP_VERSION);
 
 	switch (data) {
-	case 0x143a: /* MT9M111 */
+	case 0x143a: /* MT9M111 or MT9M131 */
 		mt9m111->model = V4L2_IDENT_MT9M111;
+		dev_info(&client->dev,
+			"Detected a MT9M111/MT9M131 chip ID %x\n", data);
 		break;
 	case 0x148c: /* MT9M112 */
 		mt9m111->model = V4L2_IDENT_MT9M112;
+		dev_info(&client->dev, "Detected a MT9M112 chip ID %x\n", data);
 		break;
 	default:
 		ret = -ENODEV;
 		dev_err(&client->dev,
-			"No MT9M11x chip detected, register read %x\n", data);
+			"No MT9M111/MT9M112/MT9M131 chip detected register read %x\n",
+			data);
 		goto ei2c;
 	}
 
-	dev_info(&client->dev, "Detected a MT9M11x chip ID %x\n", data);
+	ret = mt9m111_init(client);
 
 ei2c:
 	return ret;
@@ -1034,13 +1040,13 @@ static int mt9m111_probe(struct i2c_client *client,
 	int ret;
 
 	if (!icd) {
-		dev_err(&client->dev, "MT9M11x: missing soc-camera data!\n");
+		dev_err(&client->dev, "mt9m111: soc-camera data missing!\n");
 		return -EINVAL;
 	}
 
 	icl = to_soc_camera_link(icd);
 	if (!icl) {
-		dev_err(&client->dev, "MT9M11x driver needs platform data\n");
+		dev_err(&client->dev, "mt9m111: driver needs platform data\n");
 		return -EINVAL;
 	}
 
@@ -1114,6 +1120,6 @@ static void __exit mt9m111_mod_exit(void)
 module_init(mt9m111_mod_init);
 module_exit(mt9m111_mod_exit);
 
-MODULE_DESCRIPTION("Micron MT9M111/MT9M112 Camera driver");
+MODULE_DESCRIPTION("Micron/Aptina MT9M111/MT9M112/MT9M131 Camera driver");
 MODULE_AUTHOR("Robert Jarzmik");
 MODULE_LICENSE("GPL");

drivers/media/video/mx2_camera.c

@@ -785,6 +785,8 @@ static int mx2_camera_set_bus_param(struct soc_camera_device *icd,
 	if (ret < 0)
 		return ret;
 
+	if (common_flags & SOCAM_PCLK_SAMPLE_RISING)
+		csicr1 |= CSICR1_REDGE;
 	if (common_flags & SOCAM_PCLK_SAMPLE_FALLING)
 		csicr1 |= CSICR1_INV_PCLK;
 	if (common_flags & SOCAM_VSYNC_ACTIVE_HIGH)
@@ -1201,7 +1203,7 @@ static void mx27_camera_frame_done_emma(struct mx2_camera_dev *pcdev,
 	buf = list_entry(pcdev->capture.next,
 			struct mx2_buffer, vb.queue);
 
-	buf->bufnum = bufnum;
+	buf->bufnum = !bufnum;
 
 	list_move_tail(pcdev->capture.next, &pcdev->active_bufs);
 

drivers/media/video/pvrusb2/pvrusb2-debugifc.c

@@ -94,8 +94,6 @@ static int debugifc_parse_unsigned_number(const char *buf,unsigned int count,
 					  u32 *num_ptr)
 {
 	u32 result = 0;
-	u32 val;
-	int ch;
 	int radix = 10;
 	if ((count >= 2) && (buf[0] == '0') &&
 	    ((buf[1] == 'x') || (buf[1] == 'X'))) {
@@ -107,17 +105,9 @@ static int debugifc_parse_unsigned_number(const char *buf,unsigned int count,
 	}
 
 	while (count--) {
-		ch = *buf++;
-		if ((ch >= '0') && (ch <= '9')) {
-			val = ch - '0';
-		} else if ((ch >= 'a') && (ch <= 'f')) {
-			val = ch - 'a' + 10;
-		} else if ((ch >= 'A') && (ch <= 'F')) {
-			val = ch - 'A' + 10;
-		} else {
+		int val = hex_to_bin(*buf++);
+		if (val < 0 || val >= radix)
 			return -EINVAL;
-		}
-		if (val >= radix) return -EINVAL;
 		result *= radix;
 		result += val;
 	}

drivers/media/video/s5p-fimc/Makefile

@@ -0,0 +1,3 @@
+
+obj-$(CONFIG_VIDEO_SAMSUNG_S5P_FIMC) := s5p-fimc.o
+s5p-fimc-y := fimc-core.o fimc-reg.o

drivers/media/video/s5p-fimc/fimc-core.c

@@ -0,0 +1,1586 @@
+/*
+ * S5P camera interface (video postprocessor) driver
+ *
+ * Copyright (c) 2010 Samsung Electronics
+ *
+ * Sylwester Nawrocki, <s.nawrocki@samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published
+ * by the Free Software Foundation, either version 2 of the License,
+ * or (at your option) any later version.
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/version.h>
+#include <linux/types.h>
+#include <linux/errno.h>
+#include <linux/bug.h>
+#include <linux/interrupt.h>
+#include <linux/device.h>
+#include <linux/platform_device.h>
+#include <linux/list.h>
+#include <linux/io.h>
+#include <linux/slab.h>
+#include <linux/clk.h>
+#include <media/v4l2-ioctl.h>
+#include <media/videobuf-dma-contig.h>
+
+#include "fimc-core.h"
+
+static char *fimc_clock_name[NUM_FIMC_CLOCKS] = { "sclk_fimc", "fimc" };
+
+static struct fimc_fmt fimc_formats[] = {
+	{
+		.name	= "RGB565",
+		.fourcc	= V4L2_PIX_FMT_RGB565X,
+		.depth	= 16,
+		.color	= S5P_FIMC_RGB565,
+		.buff_cnt = 1,
+		.planes_cnt = 1
+	}, {
+		.name	= "BGR666",
+		.fourcc	= V4L2_PIX_FMT_BGR666,
+		.depth	= 32,
+		.color	= S5P_FIMC_RGB666,
+		.buff_cnt = 1,
+		.planes_cnt = 1
+	}, {
+		.name = "XRGB-8-8-8-8, 24 bpp",
+		.fourcc	= V4L2_PIX_FMT_RGB24,
+		.depth = 32,
+		.color	= S5P_FIMC_RGB888,
+		.buff_cnt = 1,
+		.planes_cnt = 1
+	}, {
+		.name	= "YUV 4:2:2 packed, YCbYCr",
+		.fourcc	= V4L2_PIX_FMT_YUYV,
+		.depth	= 16,
+		.color	= S5P_FIMC_YCBYCR422,
+		.buff_cnt = 1,
+		.planes_cnt = 1
+		}, {
+		.name	= "YUV 4:2:2 packed, CbYCrY",
+		.fourcc	= V4L2_PIX_FMT_UYVY,
+		.depth	= 16,
+		.color	= S5P_FIMC_CBYCRY422,
+		.buff_cnt = 1,
+		.planes_cnt = 1
+	}, {
+		.name	= "YUV 4:2:2 packed, CrYCbY",
+		.fourcc	= V4L2_PIX_FMT_VYUY,
+		.depth	= 16,
+		.color	= S5P_FIMC_CRYCBY422,
+		.buff_cnt = 1,
+		.planes_cnt = 1
+	}, {
+		.name	= "YUV 4:2:2 packed, YCrYCb",
+		.fourcc	= V4L2_PIX_FMT_YVYU,
+		.depth	= 16,
+		.color	= S5P_FIMC_YCRYCB422,
+		.buff_cnt = 1,
+		.planes_cnt = 1
+	}, {
+		.name	= "YUV 4:2:2 planar, Y/Cb/Cr",
+		.fourcc	= V4L2_PIX_FMT_YUV422P,
+		.depth	= 12,
+		.color	= S5P_FIMC_YCBCR422,
+		.buff_cnt = 1,
+		.planes_cnt = 3
+	}, {
+		.name	= "YUV 4:2:2 planar, Y/CbCr",
+		.fourcc	= V4L2_PIX_FMT_NV16,
+		.depth	= 16,
+		.color	= S5P_FIMC_YCBCR422,
+		.buff_cnt = 1,
+		.planes_cnt = 2
+	}, {
+		.name	= "YUV 4:2:2 planar, Y/CrCb",
+		.fourcc	= V4L2_PIX_FMT_NV61,
+		.depth	= 16,
+		.color	= S5P_FIMC_RGB565,
+		.buff_cnt = 1,
+		.planes_cnt = 2
+	}, {
+		.name	= "YUV 4:2:0 planar, YCbCr",
+		.fourcc	= V4L2_PIX_FMT_YUV420,
+		.depth	= 12,
+		.color	= S5P_FIMC_YCBCR420,
+		.buff_cnt = 1,
+		.planes_cnt = 3
+	}, {
+		.name	= "YUV 4:2:0 planar, Y/CbCr",
+		.fourcc	= V4L2_PIX_FMT_NV12,
+		.depth	= 12,
+		.color	= S5P_FIMC_YCBCR420,
+		.buff_cnt = 1,
+		.planes_cnt = 2
+	}
+ };
+
+static struct v4l2_queryctrl fimc_ctrls[] = {
+	{
+		.id		= V4L2_CID_HFLIP,
+		.type		= V4L2_CTRL_TYPE_BOOLEAN,
+		.name		= "Horizontal flip",
+		.minimum	= 0,
+		.maximum	= 1,
+		.default_value	= 0,
+	},
+	{
+		.id		= V4L2_CID_VFLIP,
+		.type		= V4L2_CTRL_TYPE_BOOLEAN,
+		.name		= "Vertical flip",
+		.minimum	= 0,
+		.maximum	= 1,
+		.default_value	= 0,
+	},
+	{
+		.id		= V4L2_CID_ROTATE,
+		.type		= V4L2_CTRL_TYPE_INTEGER,
+		.name		= "Rotation (CCW)",
+		.minimum	= 0,
+		.maximum	= 270,
+		.step		= 90,
+		.default_value	= 0,
+	},
+};
+
+
+static struct v4l2_queryctrl *get_ctrl(int id)
+{
+	int i;
+
+	for (i = 0; i < ARRAY_SIZE(fimc_ctrls); ++i)
+		if (id == fimc_ctrls[i].id)
+			return &fimc_ctrls[i];
+	return NULL;
+}
+
+static int fimc_check_scaler_ratio(struct v4l2_rect *r, struct fimc_frame *f)
+{
+	if (r->width > f->width) {
+		if (f->width > (r->width * SCALER_MAX_HRATIO))
+			return -EINVAL;
+	} else {
+		if ((f->width * SCALER_MAX_HRATIO) < r->width)
+			return -EINVAL;
+	}
+
+	if (r->height > f->height) {
+		if (f->height > (r->height * SCALER_MAX_VRATIO))
+			return -EINVAL;
+	} else {
+		if ((f->height * SCALER_MAX_VRATIO) < r->height)
+			return -EINVAL;
+	}
+
+	return 0;
+}
+
+static int fimc_get_scaler_factor(u32 src, u32 tar, u32 *ratio, u32 *shift)
+{
+	if (src >= tar * 64) {
+		return -EINVAL;
+	} else if (src >= tar * 32) {
+		*ratio = 32;
+		*shift = 5;
+	} else if (src >= tar * 16) {
+		*ratio = 16;
+		*shift = 4;
+	} else if (src >= tar * 8) {
+		*ratio = 8;
+		*shift = 3;
+	} else if (src >= tar * 4) {
+		*ratio = 4;
+		*shift = 2;
+	} else if (src >= tar * 2) {
+		*ratio = 2;
+		*shift = 1;
+	} else {
+		*ratio = 1;
+		*shift = 0;
+	}
+
+	return 0;
+}
+
+static int fimc_set_scaler_info(struct fimc_ctx *ctx)
+{
+	struct fimc_scaler *sc = &ctx->scaler;
+	struct fimc_frame *s_frame = &ctx->s_frame;
+	struct fimc_frame *d_frame = &ctx->d_frame;
+	int tx, ty, sx, sy;
+	int ret;
+
+	tx = d_frame->width;
+	ty = d_frame->height;
+	if (tx <= 0 || ty <= 0) {
+		v4l2_err(&ctx->fimc_dev->m2m.v4l2_dev,
+			"invalid target size: %d x %d", tx, ty);
+		return -EINVAL;
+	}
+
+	sx = s_frame->width;
+	sy = s_frame->height;
+	if (sx <= 0 || sy <= 0) {
+		err("invalid source size: %d x %d", sx, sy);
+		return -EINVAL;
+	}
+
+	sc->real_width = sx;
+	sc->real_height = sy;
+	dbg("sx= %d, sy= %d, tx= %d, ty= %d", sx, sy, tx, ty);
+
+	ret = fimc_get_scaler_factor(sx, tx, &sc->pre_hratio, &sc->hfactor);
+	if (ret)
+		return ret;
+
+	ret = fimc_get_scaler_factor(sy, ty,  &sc->pre_vratio, &sc->vfactor);
+	if (ret)
+		return ret;
+
+	sc->pre_dst_width = sx / sc->pre_hratio;
+	sc->pre_dst_height = sy / sc->pre_vratio;
+
+	sc->main_hratio = (sx << 8) / (tx << sc->hfactor);
+	sc->main_vratio = (sy << 8) / (ty << sc->vfactor);
+
+	sc->scaleup_h = (tx >= sx) ? 1 : 0;
+	sc->scaleup_v = (ty >= sy) ? 1 : 0;
+
+	/* check to see if input and output size/format differ */
+	if (s_frame->fmt->color == d_frame->fmt->color
+		&& s_frame->width == d_frame->width
+		&& s_frame->height == d_frame->height)
+		sc->copy_mode = 1;
+	else
+		sc->copy_mode = 0;
+
+	return 0;
+}
+
+
+static irqreturn_t fimc_isr(int irq, void *priv)
+{
+	struct fimc_vid_buffer *src_buf, *dst_buf;
+	struct fimc_dev *fimc = (struct fimc_dev *)priv;
+	struct fimc_ctx *ctx;
+
+	BUG_ON(!fimc);
+	fimc_hw_clear_irq(fimc);
+
+	spin_lock(&fimc->slock);
+
+	if (test_and_clear_bit(ST_M2M_PEND, &fimc->state)) {
+		ctx = v4l2_m2m_get_curr_priv(fimc->m2m.m2m_dev);
+		if (!ctx || !ctx->m2m_ctx)
+			goto isr_unlock;
+		src_buf = v4l2_m2m_src_buf_remove(ctx->m2m_ctx);
+		dst_buf = v4l2_m2m_dst_buf_remove(ctx->m2m_ctx);
+		if (src_buf && dst_buf) {
+			spin_lock(&fimc->irqlock);
+			src_buf->vb.state = dst_buf->vb.state =  VIDEOBUF_DONE;
+			wake_up(&src_buf->vb.done);
+			wake_up(&dst_buf->vb.done);
+			spin_unlock(&fimc->irqlock);
+			v4l2_m2m_job_finish(fimc->m2m.m2m_dev, ctx->m2m_ctx);
+		}
+	}
+
+isr_unlock:
+	spin_unlock(&fimc->slock);
+	return IRQ_HANDLED;
+}
+
+/* The color format (planes_cnt, buff_cnt) must be already configured. */
+static int fimc_prepare_addr(struct fimc_ctx *ctx,
+		struct fimc_vid_buffer *buf, enum v4l2_buf_type type)
+{
+	struct fimc_frame *frame;
+	struct fimc_addr *paddr;
+	u32 pix_size;
+	int ret = 0;
+
+	frame = ctx_m2m_get_frame(ctx, type);
+	if (IS_ERR(frame))
+		return PTR_ERR(frame);
+	paddr = &frame->paddr;
+
+	if (!buf)
+		return -EINVAL;
+
+	pix_size = frame->width * frame->height;
+
+	dbg("buff_cnt= %d, planes_cnt= %d, frame->size= %d, pix_size= %d",
+		frame->fmt->buff_cnt, frame->fmt->planes_cnt,
+		frame->size, pix_size);
+
+	if (frame->fmt->buff_cnt == 1) {
+		paddr->y = videobuf_to_dma_contig(&buf->vb);
+		switch (frame->fmt->planes_cnt) {
+		case 1:
+			paddr->cb = 0;
+			paddr->cr = 0;
+			break;
+		case 2:
+			/* decompose Y into Y/Cb */
+			paddr->cb = (u32)(paddr->y + pix_size);
+			paddr->cr = 0;
+			break;
+		case 3:
+			paddr->cb = (u32)(paddr->y + pix_size);
+			/* decompose Y into Y/Cb/Cr */
+			if (S5P_FIMC_YCBCR420 == frame->fmt->color)
+				paddr->cr = (u32)(paddr->cb
+						+ (pix_size >> 2));
+			else /* 422 */
+				paddr->cr = (u32)(paddr->cb
+						+ (pix_size >> 1));
+			break;
+		default:
+			return -EINVAL;
+		}
+	}
+
+	dbg("PHYS_ADDR: type= %d, y= 0x%X  cb= 0x%X cr= 0x%X ret= %d",
+	type, paddr->y, paddr->cb, paddr->cr, ret);
+
+	return ret;
+}
+
+/* Set order for 1 and 2 plane YCBCR 4:2:2 formats. */
+static void fimc_set_yuv_order(struct fimc_ctx *ctx)
+{
+	/* The one only mode supported in SoC. */
+	ctx->in_order_2p = S5P_FIMC_LSB_CRCB;
+	ctx->out_order_2p = S5P_FIMC_LSB_CRCB;
+
+	/* Set order for 1 plane input formats. */
+	switch (ctx->s_frame.fmt->color) {
+	case S5P_FIMC_YCRYCB422:
+		ctx->in_order_1p = S5P_FIMC_IN_YCRYCB;
+		break;
+	case S5P_FIMC_CBYCRY422:
+		ctx->in_order_1p = S5P_FIMC_IN_CBYCRY;
+		break;
+	case S5P_FIMC_CRYCBY422:
+		ctx->in_order_1p = S5P_FIMC_IN_CRYCBY;
+		break;
+	case S5P_FIMC_YCBYCR422:
+	default:
+		ctx->in_order_1p = S5P_FIMC_IN_YCBYCR;
+		break;
+	}
+	dbg("ctx->in_order_1p= %d", ctx->in_order_1p);
+
+	switch (ctx->d_frame.fmt->color) {
+	case S5P_FIMC_YCRYCB422:
+		ctx->out_order_1p = S5P_FIMC_OUT_YCRYCB;
+		break;
+	case S5P_FIMC_CBYCRY422:
+		ctx->out_order_1p = S5P_FIMC_OUT_CBYCRY;
+		break;
+	case S5P_FIMC_CRYCBY422:
+		ctx->out_order_1p = S5P_FIMC_OUT_CRYCBY;
+		break;
+	case S5P_FIMC_YCBYCR422:
+	default:
+		ctx->out_order_1p = S5P_FIMC_OUT_YCBYCR;
+		break;
+	}
+	dbg("ctx->out_order_1p= %d", ctx->out_order_1p);
+}
+
+/**
+ * fimc_prepare_config - check dimensions, operation and color mode
+ *			 and pre-calculate offset and the scaling coefficients.
+ *
+ * @ctx: hardware context information
+ * @flags: flags indicating which parameters to check/update
+ *
+ * Return: 0 if dimensions are valid or non zero otherwise.
+ */
+static int fimc_prepare_config(struct fimc_ctx *ctx, u32 flags)
+{
+	struct fimc_frame *s_frame, *d_frame;
+	struct fimc_vid_buffer *buf = NULL;
+	struct samsung_fimc_variant *variant = ctx->fimc_dev->variant;
+	int ret = 0;
+
+	s_frame = &ctx->s_frame;
+	d_frame = &ctx->d_frame;
+
+	if (flags & FIMC_PARAMS) {
+		if ((ctx->out_path == FIMC_DMA) &&
+			(ctx->rotation == 90 || ctx->rotation == 270)) {
+			swap(d_frame->f_width, d_frame->f_height);
+			swap(d_frame->width, d_frame->height);
+		}
+
+		/* Prepare the output offset ratios for scaler. */
+		d_frame->dma_offset.y_h = d_frame->offs_h;
+		if (!variant->pix_hoff)
+			d_frame->dma_offset.y_h *= (d_frame->fmt->depth >> 3);
+
+		d_frame->dma_offset.y_v = d_frame->offs_v;
+
+		d_frame->dma_offset.cb_h = d_frame->offs_h;
+		d_frame->dma_offset.cb_v = d_frame->offs_v;
+
+		d_frame->dma_offset.cr_h = d_frame->offs_h;
+		d_frame->dma_offset.cr_v = d_frame->offs_v;
+
+		if (!variant->pix_hoff && d_frame->fmt->planes_cnt == 3) {
+			d_frame->dma_offset.cb_h >>= 1;
+			d_frame->dma_offset.cb_v >>= 1;
+			d_frame->dma_offset.cr_h >>= 1;
+			d_frame->dma_offset.cr_v >>= 1;
+		}
+
+		dbg("out offset: color= %d, y_h= %d, y_v= %d",
+			d_frame->fmt->color,
+			d_frame->dma_offset.y_h, d_frame->dma_offset.y_v);
+
+		/* Prepare the input offset ratios for scaler. */
+		s_frame->dma_offset.y_h = s_frame->offs_h;
+		if (!variant->pix_hoff)
+			s_frame->dma_offset.y_h *= (s_frame->fmt->depth >> 3);
+		s_frame->dma_offset.y_v = s_frame->offs_v;
+
+		s_frame->dma_offset.cb_h = s_frame->offs_h;
+		s_frame->dma_offset.cb_v = s_frame->offs_v;
+
+		s_frame->dma_offset.cr_h = s_frame->offs_h;
+		s_frame->dma_offset.cr_v = s_frame->offs_v;
+
+		if (!variant->pix_hoff && s_frame->fmt->planes_cnt == 3) {
+			s_frame->dma_offset.cb_h >>= 1;
+			s_frame->dma_offset.cb_v >>= 1;
+			s_frame->dma_offset.cr_h >>= 1;
+			s_frame->dma_offset.cr_v >>= 1;
+		}
+
+		dbg("in offset: color= %d, y_h= %d, y_v= %d",
+			s_frame->fmt->color, s_frame->dma_offset.y_h,
+			s_frame->dma_offset.y_v);
+
+		fimc_set_yuv_order(ctx);
+
+		/* Check against the scaler ratio. */
+		if (s_frame->height > (SCALER_MAX_VRATIO * d_frame->height) ||
+		    s_frame->width > (SCALER_MAX_HRATIO * d_frame->width)) {
+			err("out of scaler range");
+			return -EINVAL;
+		}
+	}
+
+	/* Input DMA mode is not allowed when the scaler is disabled. */
+	ctx->scaler.enabled = 1;
+
+	if (flags & FIMC_SRC_ADDR) {
+		buf = v4l2_m2m_next_src_buf(ctx->m2m_ctx);
+		ret = fimc_prepare_addr(ctx, buf,
+			V4L2_BUF_TYPE_VIDEO_OUTPUT);
+		if (ret)
+			return ret;
+	}
+
+	if (flags & FIMC_DST_ADDR) {
+		buf = v4l2_m2m_next_dst_buf(ctx->m2m_ctx);
+		ret = fimc_prepare_addr(ctx, buf,
+			V4L2_BUF_TYPE_VIDEO_CAPTURE);
+	}
+
+	return ret;
+}
+
+static void fimc_dma_run(void *priv)
+{
+	struct fimc_ctx *ctx = priv;
+	struct fimc_dev *fimc;
+	unsigned long flags;
+	u32 ret;
+
+	if (WARN(!ctx, "null hardware context"))
+		return;
+
+	fimc = ctx->fimc_dev;
+
+	spin_lock_irqsave(&ctx->slock, flags);
+	set_bit(ST_M2M_PEND, &fimc->state);
+
+	ctx->state |= (FIMC_SRC_ADDR | FIMC_DST_ADDR);
+	ret = fimc_prepare_config(ctx, ctx->state);
+	if (ret) {
+		err("general configuration error");
+		goto dma_unlock;
+	}
+
+	if (fimc->m2m.ctx != ctx)
+		ctx->state |= FIMC_PARAMS;
+
+	fimc_hw_set_input_addr(fimc, &ctx->s_frame.paddr);
+
+	if (ctx->state & FIMC_PARAMS) {
+		fimc_hw_set_input_path(ctx);
+		fimc_hw_set_in_dma(ctx);
+		if (fimc_set_scaler_info(ctx)) {
+			err("scaler configuration error");
+			goto dma_unlock;
+		}
+		fimc_hw_set_prescaler(ctx);
+		fimc_hw_set_scaler(ctx);
+		fimc_hw_set_target_format(ctx);
+		fimc_hw_set_rotation(ctx);
+		fimc_hw_set_effect(ctx);
+	}
+
+	fimc_hw_set_output_path(ctx);
+	if (ctx->state & (FIMC_DST_ADDR | FIMC_PARAMS))
+		fimc_hw_set_output_addr(fimc, &ctx->d_frame.paddr);
+
+	if (ctx->state & FIMC_PARAMS)
+		fimc_hw_set_out_dma(ctx);
+
+	if (ctx->scaler.enabled)
+		fimc_hw_start_scaler(fimc);
+	fimc_hw_en_capture(ctx);
+
+	ctx->state = 0;
+	fimc_hw_start_in_dma(fimc);
+
+	fimc->m2m.ctx = ctx;
+
+dma_unlock:
+	spin_unlock_irqrestore(&ctx->slock, flags);
+}
+
+static void fimc_job_abort(void *priv)
+{
+	/* Nothing done in job_abort. */
+}
+
+static void fimc_buf_release(struct videobuf_queue *vq,
+				    struct videobuf_buffer *vb)
+{
+	videobuf_dma_contig_free(vq, vb);
+	vb->state = VIDEOBUF_NEEDS_INIT;
+}
+
+static int fimc_buf_setup(struct videobuf_queue *vq, unsigned int *count,
+				unsigned int *size)
+{
+	struct fimc_ctx *ctx = vq->priv_data;
+	struct fimc_frame *frame;
+
+	frame = ctx_m2m_get_frame(ctx, vq->type);
+	if (IS_ERR(frame))
+		return PTR_ERR(frame);
+
+	*size = (frame->width * frame->height * frame->fmt->depth) >> 3;
+	if (0 == *count)
+		*count = 1;
+	return 0;
+}
+
+static int fimc_buf_prepare(struct videobuf_queue *vq,
+		struct videobuf_buffer *vb, enum v4l2_field field)
+{
+	struct fimc_ctx *ctx = vq->priv_data;
+	struct v4l2_device *v4l2_dev = &ctx->fimc_dev->m2m.v4l2_dev;
+	struct fimc_frame *frame;
+	int ret;
+
+	frame = ctx_m2m_get_frame(ctx, vq->type);
+	if (IS_ERR(frame))
+		return PTR_ERR(frame);
+
+	if (vb->baddr) {
+		if (vb->bsize < frame->size) {
+			v4l2_err(v4l2_dev,
+				"User-provided buffer too small (%d < %d)\n",
+				 vb->bsize, frame->size);
+			WARN_ON(1);
+			return -EINVAL;
+		}
+	} else if (vb->state != VIDEOBUF_NEEDS_INIT
+		   && vb->bsize < frame->size) {
+		return -EINVAL;
+	}
+
+	vb->width       = frame->width;
+	vb->height      = frame->height;
+	vb->bytesperline = (frame->width * frame->fmt->depth) >> 3;
+	vb->size        = frame->size;
+	vb->field       = field;
+
+	if (VIDEOBUF_NEEDS_INIT == vb->state) {
+		ret = videobuf_iolock(vq, vb, NULL);
+		if (ret) {
+			v4l2_err(v4l2_dev, "Iolock failed\n");
+			fimc_buf_release(vq, vb);
+			return ret;
+		}
+	}
+	vb->state = VIDEOBUF_PREPARED;
+
+	return 0;
+}
+
+static void fimc_buf_queue(struct videobuf_queue *vq,
+				  struct videobuf_buffer *vb)
+{
+	struct fimc_ctx *ctx = vq->priv_data;
+	v4l2_m2m_buf_queue(ctx->m2m_ctx, vq, vb);
+}
+
+static struct videobuf_queue_ops fimc_qops = {
+	.buf_setup	= fimc_buf_setup,
+	.buf_prepare	= fimc_buf_prepare,
+	.buf_queue	= fimc_buf_queue,
+	.buf_release	= fimc_buf_release,
+};
+
+static int fimc_m2m_querycap(struct file *file, void *priv,
+			   struct v4l2_capability *cap)
+{
+	struct fimc_ctx *ctx = file->private_data;
+	struct fimc_dev *fimc = ctx->fimc_dev;
+
+	strncpy(cap->driver, fimc->pdev->name, sizeof(cap->driver) - 1);
+	strncpy(cap->card, fimc->pdev->name, sizeof(cap->card) - 1);
+	cap->bus_info[0] = 0;
+	cap->version = KERNEL_VERSION(1, 0, 0);
+	cap->capabilities = V4L2_CAP_STREAMING |
+		V4L2_CAP_VIDEO_CAPTURE | V4L2_CAP_VIDEO_OUTPUT;
+
+	return 0;
+}
+
+static int fimc_m2m_enum_fmt(struct file *file, void *priv,
+				struct v4l2_fmtdesc *f)
+{
+	struct fimc_fmt *fmt;
+
+	if (f->index >= ARRAY_SIZE(fimc_formats))
+		return -EINVAL;
+
+	fmt = &fimc_formats[f->index];
+	strncpy(f->description, fmt->name, sizeof(f->description) - 1);
+	f->pixelformat = fmt->fourcc;
+	return 0;
+}
+
+static int fimc_m2m_g_fmt(struct file *file, void *priv, struct v4l2_format *f)
+{
+	struct fimc_ctx *ctx = priv;
+	struct fimc_frame *frame;
+
+	frame = ctx_m2m_get_frame(ctx, f->type);
+	if (IS_ERR(frame))
+		return PTR_ERR(frame);
+
+	f->fmt.pix.width	= frame->width;
+	f->fmt.pix.height	= frame->height;
+	f->fmt.pix.field	= V4L2_FIELD_NONE;
+	f->fmt.pix.pixelformat	= frame->fmt->fourcc;
+
+	return 0;
+}
+
+static struct fimc_fmt *find_format(struct v4l2_format *f)
+{
+	struct fimc_fmt *fmt;
+	unsigned int i;
+
+	for (i = 0; i < ARRAY_SIZE(fimc_formats); ++i) {
+		fmt = &fimc_formats[i];
+		if (fmt->fourcc == f->fmt.pix.pixelformat)
+			break;
+	}
+	if (i == ARRAY_SIZE(fimc_formats))
+		return NULL;
+
+	return fmt;
+}
+
+static int fimc_m2m_try_fmt(struct file *file, void *priv,
+			     struct v4l2_format *f)
+{
+	struct fimc_fmt *fmt;
+	u32 max_width, max_height, mod_x, mod_y;
+	struct fimc_ctx *ctx = priv;
+	struct fimc_dev *fimc = ctx->fimc_dev;
+	struct v4l2_pix_format *pix = &f->fmt.pix;
+	struct samsung_fimc_variant *variant = fimc->variant;
+
+	fmt = find_format(f);
+	if (!fmt) {
+		v4l2_err(&fimc->m2m.v4l2_dev,
+			 "Fourcc format (0x%X) invalid.\n",  pix->pixelformat);
+		return -EINVAL;
+	}
+
+	if (pix->field == V4L2_FIELD_ANY)
+		pix->field = V4L2_FIELD_NONE;
+	else if (V4L2_FIELD_NONE != pix->field)
+		return -EINVAL;
+
+	if (f->type == V4L2_BUF_TYPE_VIDEO_OUTPUT) {
+		max_width = variant->scaler_dis_w;
+		max_height = variant->scaler_dis_w;
+		mod_x = variant->min_inp_pixsize;
+		mod_y = variant->min_inp_pixsize;
+	} else if (f->type == V4L2_BUF_TYPE_VIDEO_CAPTURE) {
+		max_width = variant->out_rot_dis_w;
+		max_height = variant->out_rot_dis_w;
+		mod_x = variant->min_out_pixsize;
+		mod_y = variant->min_out_pixsize;
+	} else {
+		err("Wrong stream type (%d)", f->type);
+		return -EINVAL;
+	}
+
+	dbg("max_w= %d, max_h= %d", max_width, max_height);
+
+	if (pix->height > max_height)
+		pix->height = max_height;
+	if (pix->width > max_width)
+		pix->width = max_width;
+
+	if (tiled_fmt(fmt)) {
+		mod_x = 64; /* 64x32 tile */
+		mod_y = 32;
+	}
+
+	dbg("mod_x= 0x%X, mod_y= 0x%X", mod_x, mod_y);
+
+	pix->width = (pix->width == 0) ? mod_x : ALIGN(pix->width, mod_x);
+	pix->height = (pix->height == 0) ? mod_y : ALIGN(pix->height, mod_y);
+
+	if (pix->bytesperline == 0 ||
+	    pix->bytesperline * 8 / fmt->depth > pix->width)
+		pix->bytesperline = (pix->width * fmt->depth) >> 3;
+
+	if (pix->sizeimage == 0)
+		pix->sizeimage = pix->height * pix->bytesperline;
+
+	dbg("pix->bytesperline= %d, fmt->depth= %d",
+	    pix->bytesperline, fmt->depth);
+
+	return 0;
+}
+
+
+static int fimc_m2m_s_fmt(struct file *file, void *priv, struct v4l2_format *f)
+{
+	struct fimc_ctx *ctx = priv;
+	struct v4l2_device *v4l2_dev = &ctx->fimc_dev->m2m.v4l2_dev;
+	struct videobuf_queue *src_vq, *dst_vq;
+	struct fimc_frame *frame;
+	struct v4l2_pix_format *pix;
+	unsigned long flags;
+	int ret = 0;
+
+	BUG_ON(!ctx);
+
+	ret = fimc_m2m_try_fmt(file, priv, f);
+	if (ret)
+		return ret;
+
+	mutex_lock(&ctx->fimc_dev->lock);
+
+	src_vq = v4l2_m2m_get_src_vq(ctx->m2m_ctx);
+	dst_vq = v4l2_m2m_get_dst_vq(ctx->m2m_ctx);
+
+	mutex_lock(&src_vq->vb_lock);
+	mutex_lock(&dst_vq->vb_lock);
+
+	if (f->type == V4L2_BUF_TYPE_VIDEO_OUTPUT) {
+		if (videobuf_queue_is_busy(src_vq)) {
+			v4l2_err(v4l2_dev, "%s queue busy\n", __func__);
+			ret = -EBUSY;
+			goto s_fmt_out;
+		}
+		frame = &ctx->s_frame;
+		spin_lock_irqsave(&ctx->slock, flags);
+		ctx->state |= FIMC_SRC_FMT;
+		spin_unlock_irqrestore(&ctx->slock, flags);
+
+	} else if (f->type == V4L2_BUF_TYPE_VIDEO_CAPTURE) {
+		if (videobuf_queue_is_busy(dst_vq)) {
+			v4l2_err(v4l2_dev, "%s queue busy\n", __func__);
+			ret = -EBUSY;
+			goto s_fmt_out;
+		}
+		frame = &ctx->d_frame;
+		spin_lock_irqsave(&ctx->slock, flags);
+		ctx->state |= FIMC_DST_FMT;
+		spin_unlock_irqrestore(&ctx->slock, flags);
+	} else {
+		v4l2_err(&ctx->fimc_dev->m2m.v4l2_dev,
+			 "Wrong buffer/video queue type (%d)\n", f->type);
+		return -EINVAL;
+	}
+
+	pix = &f->fmt.pix;
+	frame->fmt = find_format(f);
+	if (!frame->fmt) {
+		ret = -EINVAL;
+		goto s_fmt_out;
+	}
+
+	frame->f_width = pix->bytesperline * 8 / frame->fmt->depth;
+	frame->f_height = pix->sizeimage/pix->bytesperline;
+	frame->width = pix->width;
+	frame->height = pix->height;
+	frame->o_width = pix->width;
+	frame->o_height = pix->height;
+	frame->offs_h = 0;
+	frame->offs_v = 0;
+	frame->size = (pix->width * pix->height * frame->fmt->depth) >> 3;
+	src_vq->field = dst_vq->field = pix->field;
+	spin_lock_irqsave(&ctx->slock, flags);
+	ctx->state |= FIMC_PARAMS;
+	spin_unlock_irqrestore(&ctx->slock, flags);
+
+	dbg("f_width= %d, f_height= %d", frame->f_width, frame->f_height);
+
+s_fmt_out:
+	mutex_unlock(&dst_vq->vb_lock);
+	mutex_unlock(&src_vq->vb_lock);
+	mutex_unlock(&ctx->fimc_dev->lock);
+	return ret;
+}
+
+static int fimc_m2m_reqbufs(struct file *file, void *priv,
+			  struct v4l2_requestbuffers *reqbufs)
+{
+	struct fimc_ctx *ctx = priv;
+	return v4l2_m2m_reqbufs(file, ctx->m2m_ctx, reqbufs);
+}
+
+static int fimc_m2m_querybuf(struct file *file, void *priv,
+			   struct v4l2_buffer *buf)
+{
+	struct fimc_ctx *ctx = priv;
+	return v4l2_m2m_querybuf(file, ctx->m2m_ctx, buf);
+}
+
+static int fimc_m2m_qbuf(struct file *file, void *priv,
+			  struct v4l2_buffer *buf)
+{
+	struct fimc_ctx *ctx = priv;
+
+	return v4l2_m2m_qbuf(file, ctx->m2m_ctx, buf);
+}
+
+static int fimc_m2m_dqbuf(struct file *file, void *priv,
+			   struct v4l2_buffer *buf)
+{
+	struct fimc_ctx *ctx = priv;
+	return v4l2_m2m_dqbuf(file, ctx->m2m_ctx, buf);
+}
+
+static int fimc_m2m_streamon(struct file *file, void *priv,
+			   enum v4l2_buf_type type)
+{
+	struct fimc_ctx *ctx = priv;
+	return v4l2_m2m_streamon(file, ctx->m2m_ctx, type);
+}
+
+static int fimc_m2m_streamoff(struct file *file, void *priv,
+			    enum v4l2_buf_type type)
+{
+	struct fimc_ctx *ctx = priv;
+	return v4l2_m2m_streamoff(file, ctx->m2m_ctx, type);
+}
+
+int fimc_m2m_queryctrl(struct file *file, void *priv,
+			    struct v4l2_queryctrl *qc)
+{
+	struct v4l2_queryctrl *c;
+	c = get_ctrl(qc->id);
+	if (!c)
+		return -EINVAL;
+	*qc = *c;
+	return 0;
+}
+
+int fimc_m2m_g_ctrl(struct file *file, void *priv,
+			 struct v4l2_control *ctrl)
+{
+	struct fimc_ctx *ctx = priv;
+
+	switch (ctrl->id) {
+	case V4L2_CID_HFLIP:
+		ctrl->value = (FLIP_X_AXIS & ctx->flip) ? 1 : 0;
+		break;
+	case V4L2_CID_VFLIP:
+		ctrl->value = (FLIP_Y_AXIS & ctx->flip) ? 1 : 0;
+		break;
+	case V4L2_CID_ROTATE:
+		ctrl->value = ctx->rotation;
+		break;
+	default:
+		v4l2_err(&ctx->fimc_dev->m2m.v4l2_dev, "Invalid control\n");
+		return -EINVAL;
+	}
+	dbg("ctrl->value= %d", ctrl->value);
+	return 0;
+}
+
+static int check_ctrl_val(struct fimc_ctx *ctx,
+			  struct v4l2_control *ctrl)
+{
+	struct v4l2_queryctrl *c;
+	c = get_ctrl(ctrl->id);
+	if (!c)
+		return -EINVAL;
+
+	if (ctrl->value < c->minimum || ctrl->value > c->maximum
+		|| (c->step != 0 && ctrl->value % c->step != 0)) {
+		v4l2_err(&ctx->fimc_dev->m2m.v4l2_dev,
+		"Invalid control value\n");
+		return -ERANGE;
+	}
+
+	return 0;
+}
+
+int fimc_m2m_s_ctrl(struct file *file, void *priv,
+			 struct v4l2_control *ctrl)
+{
+	struct fimc_ctx *ctx = priv;
+	struct samsung_fimc_variant *variant = ctx->fimc_dev->variant;
+	unsigned long flags;
+	int ret = 0;
+
+	ret = check_ctrl_val(ctx, ctrl);
+	if (ret)
+		return ret;
+
+	switch (ctrl->id) {
+	case V4L2_CID_HFLIP:
+		if (ctx->rotation != 0)
+			return 0;
+		if (ctrl->value)
+			ctx->flip |= FLIP_X_AXIS;
+		else
+			ctx->flip &= ~FLIP_X_AXIS;
+		break;
+
+	case V4L2_CID_VFLIP:
+		if (ctx->rotation != 0)
+			return 0;
+		if (ctrl->value)
+			ctx->flip |= FLIP_Y_AXIS;
+		else
+			ctx->flip &= ~FLIP_Y_AXIS;
+		break;
+
+	case V4L2_CID_ROTATE:
+		if (ctrl->value == 90 || ctrl->value == 270) {
+			if (ctx->out_path == FIMC_LCDFIFO &&
+			    !variant->has_inp_rot) {
+				return -EINVAL;
+			} else if (ctx->in_path == FIMC_DMA &&
+				   !variant->has_out_rot) {
+				return -EINVAL;
+			}
+		}
+		ctx->rotation = ctrl->value;
+		if (ctrl->value == 180)
+			ctx->flip = FLIP_XY_AXIS;
+		break;
+
+	default:
+		v4l2_err(&ctx->fimc_dev->m2m.v4l2_dev, "Invalid control\n");
+		return -EINVAL;
+	}
+	spin_lock_irqsave(&ctx->slock, flags);
+	ctx->state |= FIMC_PARAMS;
+	spin_unlock_irqrestore(&ctx->slock, flags);
+	return 0;
+}
+
+
+static int fimc_m2m_cropcap(struct file *file, void *fh,
+			     struct v4l2_cropcap *cr)
+{
+	struct fimc_frame *frame;
+	struct fimc_ctx *ctx = fh;
+
+	frame = ctx_m2m_get_frame(ctx, cr->type);
+	if (IS_ERR(frame))
+		return PTR_ERR(frame);
+
+	cr->bounds.left = 0;
+	cr->bounds.top = 0;
+	cr->bounds.width = frame->f_width;
+	cr->bounds.height = frame->f_height;
+	cr->defrect.left = frame->offs_h;
+	cr->defrect.top = frame->offs_v;
+	cr->defrect.width = frame->o_width;
+	cr->defrect.height = frame->o_height;
+	return 0;
+}
+
+static int fimc_m2m_g_crop(struct file *file, void *fh, struct v4l2_crop *cr)
+{
+	struct fimc_frame *frame;
+	struct fimc_ctx *ctx = file->private_data;
+
+	frame = ctx_m2m_get_frame(ctx, cr->type);
+	if (IS_ERR(frame))
+		return PTR_ERR(frame);
+
+	cr->c.left = frame->offs_h;
+	cr->c.top = frame->offs_v;
+	cr->c.width = frame->width;
+	cr->c.height = frame->height;
+
+	return 0;
+}
+
+static int fimc_m2m_s_crop(struct file *file, void *fh, struct v4l2_crop *cr)
+{
+	struct fimc_ctx *ctx = file->private_data;
+	struct fimc_dev *fimc = ctx->fimc_dev;
+	unsigned long flags;
+	struct fimc_frame *f;
+	u32 min_size;
+	int ret = 0;
+
+	if (cr->c.top < 0 || cr->c.left < 0) {
+		v4l2_err(&fimc->m2m.v4l2_dev,
+			"doesn't support negative values for top & left\n");
+		return -EINVAL;
+	}
+
+	if (cr->c.width  <= 0 || cr->c.height <= 0) {
+		v4l2_err(&fimc->m2m.v4l2_dev,
+			"crop width and height must be greater than 0\n");
+		return -EINVAL;
+	}
+
+	f = ctx_m2m_get_frame(ctx, cr->type);
+	if (IS_ERR(f))
+		return PTR_ERR(f);
+
+	/* Adjust to required pixel boundary. */
+	min_size = (cr->type == V4L2_BUF_TYPE_VIDEO_OUTPUT) ?
+		fimc->variant->min_inp_pixsize : fimc->variant->min_out_pixsize;
+
+	cr->c.width = round_down(cr->c.width, min_size);
+	cr->c.height = round_down(cr->c.height, min_size);
+	cr->c.left = round_down(cr->c.left + 1, min_size);
+	cr->c.top = round_down(cr->c.top + 1, min_size);
+
+	if ((cr->c.left + cr->c.width > f->o_width)
+		|| (cr->c.top + cr->c.height > f->o_height)) {
+		v4l2_err(&fimc->m2m.v4l2_dev, "Error in S_CROP params\n");
+		return -EINVAL;
+	}
+
+	spin_lock_irqsave(&ctx->slock, flags);
+	if ((ctx->state & FIMC_SRC_FMT) && (ctx->state & FIMC_DST_FMT)) {
+		/* Check for the pixel scaling ratio when cropping input img. */
+		if (cr->type == V4L2_BUF_TYPE_VIDEO_OUTPUT)
+			ret = fimc_check_scaler_ratio(&cr->c, &ctx->d_frame);
+		else if (cr->type == V4L2_BUF_TYPE_VIDEO_CAPTURE)
+			ret = fimc_check_scaler_ratio(&cr->c, &ctx->s_frame);
+
+		if (ret) {
+			spin_unlock_irqrestore(&ctx->slock, flags);
+			v4l2_err(&fimc->m2m.v4l2_dev,  "Out of scaler range");
+			return -EINVAL;
+		}
+	}
+	ctx->state |= FIMC_PARAMS;
+	spin_unlock_irqrestore(&ctx->slock, flags);
+
+	f->offs_h = cr->c.left;
+	f->offs_v = cr->c.top;
+	f->width = cr->c.width;
+	f->height = cr->c.height;
+	return 0;
+}
+
+static const struct v4l2_ioctl_ops fimc_m2m_ioctl_ops = {
+	.vidioc_querycap		= fimc_m2m_querycap,
+
+	.vidioc_enum_fmt_vid_cap	= fimc_m2m_enum_fmt,
+	.vidioc_enum_fmt_vid_out	= fimc_m2m_enum_fmt,
+
+	.vidioc_g_fmt_vid_cap		= fimc_m2m_g_fmt,
+	.vidioc_g_fmt_vid_out		= fimc_m2m_g_fmt,
+
+	.vidioc_try_fmt_vid_cap		= fimc_m2m_try_fmt,
+	.vidioc_try_fmt_vid_out		= fimc_m2m_try_fmt,
+
+	.vidioc_s_fmt_vid_cap		= fimc_m2m_s_fmt,
+	.vidioc_s_fmt_vid_out		= fimc_m2m_s_fmt,
+
+	.vidioc_reqbufs			= fimc_m2m_reqbufs,
+	.vidioc_querybuf		= fimc_m2m_querybuf,
+
+	.vidioc_qbuf			= fimc_m2m_qbuf,
+	.vidioc_dqbuf			= fimc_m2m_dqbuf,
+
+	.vidioc_streamon		= fimc_m2m_streamon,
+	.vidioc_streamoff		= fimc_m2m_streamoff,
+
+	.vidioc_queryctrl		= fimc_m2m_queryctrl,
+	.vidioc_g_ctrl			= fimc_m2m_g_ctrl,
+	.vidioc_s_ctrl			= fimc_m2m_s_ctrl,
+
+	.vidioc_g_crop			= fimc_m2m_g_crop,
+	.vidioc_s_crop			= fimc_m2m_s_crop,
+	.vidioc_cropcap			= fimc_m2m_cropcap
+
+};
+
+static void queue_init(void *priv, struct videobuf_queue *vq,
+		       enum v4l2_buf_type type)
+{
+	struct fimc_ctx *ctx = priv;
+	struct fimc_dev *fimc = ctx->fimc_dev;
+
+	videobuf_queue_dma_contig_init(vq, &fimc_qops,
+		fimc->m2m.v4l2_dev.dev,
+		&fimc->irqlock, type, V4L2_FIELD_NONE,
+		sizeof(struct fimc_vid_buffer), priv);
+}
+
+static int fimc_m2m_open(struct file *file)
+{
+	struct fimc_dev *fimc = video_drvdata(file);
+	struct fimc_ctx *ctx = NULL;
+	int err = 0;
+
+	mutex_lock(&fimc->lock);
+	fimc->m2m.refcnt++;
+	set_bit(ST_OUTDMA_RUN, &fimc->state);
+	mutex_unlock(&fimc->lock);
+
+
+	ctx = kzalloc(sizeof *ctx, GFP_KERNEL);
+	if (!ctx)
+		return -ENOMEM;
+
+	file->private_data = ctx;
+	ctx->fimc_dev = fimc;
+	/* default format */
+	ctx->s_frame.fmt = &fimc_formats[0];
+	ctx->d_frame.fmt = &fimc_formats[0];
+	/* per user process device context initialization */
+	ctx->state = 0;
+	ctx->flags = 0;
+	ctx->effect.type = S5P_FIMC_EFFECT_ORIGINAL;
+	ctx->in_path = FIMC_DMA;
+	ctx->out_path = FIMC_DMA;
+	spin_lock_init(&ctx->slock);
+
+	ctx->m2m_ctx = v4l2_m2m_ctx_init(ctx, fimc->m2m.m2m_dev, queue_init);
+	if (IS_ERR(ctx->m2m_ctx)) {
+		err = PTR_ERR(ctx->m2m_ctx);
+		kfree(ctx);
+	}
+	return err;
+}
+
+static int fimc_m2m_release(struct file *file)
+{
+	struct fimc_ctx *ctx = file->private_data;
+	struct fimc_dev *fimc = ctx->fimc_dev;
+
+	v4l2_m2m_ctx_release(ctx->m2m_ctx);
+	kfree(ctx);
+	mutex_lock(&fimc->lock);
+	if (--fimc->m2m.refcnt <= 0)
+		clear_bit(ST_OUTDMA_RUN, &fimc->state);
+	mutex_unlock(&fimc->lock);
+	return 0;
+}
+
+static unsigned int fimc_m2m_poll(struct file *file,
+				     struct poll_table_struct *wait)
+{
+	struct fimc_ctx *ctx = file->private_data;
+	return v4l2_m2m_poll(file, ctx->m2m_ctx, wait);
+}
+
+
+static int fimc_m2m_mmap(struct file *file, struct vm_area_struct *vma)
+{
+	struct fimc_ctx *ctx = file->private_data;
+	return v4l2_m2m_mmap(file, ctx->m2m_ctx, vma);
+}
+
+static const struct v4l2_file_operations fimc_m2m_fops = {
+	.owner		= THIS_MODULE,
+	.open		= fimc_m2m_open,
+	.release	= fimc_m2m_release,
+	.poll		= fimc_m2m_poll,
+	.ioctl		= video_ioctl2,
+	.mmap		= fimc_m2m_mmap,
+};
+
+static struct v4l2_m2m_ops m2m_ops = {
+	.device_run	= fimc_dma_run,
+	.job_abort	= fimc_job_abort,
+};
+
+
+static int fimc_register_m2m_device(struct fimc_dev *fimc)
+{
+	struct video_device *vfd;
+	struct platform_device *pdev;
+	struct v4l2_device *v4l2_dev;
+	int ret = 0;
+
+	if (!fimc)
+		return -ENODEV;
+
+	pdev = fimc->pdev;
+	v4l2_dev = &fimc->m2m.v4l2_dev;
+
+	/* set name if it is empty */
+	if (!v4l2_dev->name[0])
+		snprintf(v4l2_dev->name, sizeof(v4l2_dev->name),
+			 "%s.m2m", dev_name(&pdev->dev));
+
+	ret = v4l2_device_register(&pdev->dev, v4l2_dev);
+	if (ret)
+		return ret;;
+
+	vfd = video_device_alloc();
+	if (!vfd) {
+		v4l2_err(v4l2_dev, "Failed to allocate video device\n");
+		goto err_m2m_r1;
+	}
+
+	vfd->fops	= &fimc_m2m_fops;
+	vfd->ioctl_ops	= &fimc_m2m_ioctl_ops;
+	vfd->minor	= -1;
+	vfd->release	= video_device_release;
+
+	snprintf(vfd->name, sizeof(vfd->name), "%s:m2m", dev_name(&pdev->dev));
+
+	video_set_drvdata(vfd, fimc);
+	platform_set_drvdata(pdev, fimc);
+
+	fimc->m2m.vfd = vfd;
+	fimc->m2m.m2m_dev = v4l2_m2m_init(&m2m_ops);
+	if (IS_ERR(fimc->m2m.m2m_dev)) {
+		v4l2_err(v4l2_dev, "failed to initialize v4l2-m2m device\n");
+		ret = PTR_ERR(fimc->m2m.m2m_dev);
+		goto err_m2m_r2;
+	}
+
+	ret = video_register_device(vfd, VFL_TYPE_GRABBER, -1);
+	if (ret) {
+		v4l2_err(v4l2_dev,
+			 "%s(): failed to register video device\n", __func__);
+		goto err_m2m_r3;
+	}
+	v4l2_info(v4l2_dev,
+		  "FIMC m2m driver registered as /dev/video%d\n", vfd->num);
+
+	return 0;
+
+err_m2m_r3:
+	v4l2_m2m_release(fimc->m2m.m2m_dev);
+err_m2m_r2:
+	video_device_release(fimc->m2m.vfd);
+err_m2m_r1:
+	v4l2_device_unregister(v4l2_dev);
+
+	return ret;
+}
+
+static void fimc_unregister_m2m_device(struct fimc_dev *fimc)
+{
+	if (fimc) {
+		v4l2_m2m_release(fimc->m2m.m2m_dev);
+		video_unregister_device(fimc->m2m.vfd);
+		video_device_release(fimc->m2m.vfd);
+		v4l2_device_unregister(&fimc->m2m.v4l2_dev);
+	}
+}
+
+static void fimc_clk_release(struct fimc_dev *fimc)
+{
+	int i;
+	for (i = 0; i < NUM_FIMC_CLOCKS; i++) {
+		if (fimc->clock[i]) {
+			clk_disable(fimc->clock[i]);
+			clk_put(fimc->clock[i]);
+		}
+	}
+}
+
+static int fimc_clk_get(struct fimc_dev *fimc)
+{
+	int i;
+	for (i = 0; i < NUM_FIMC_CLOCKS; i++) {
+		fimc->clock[i] = clk_get(&fimc->pdev->dev, fimc_clock_name[i]);
+		if (IS_ERR(fimc->clock[i])) {
+			dev_err(&fimc->pdev->dev,
+				"failed to get fimc clock: %s\n",
+				fimc_clock_name[i]);
+			return -ENXIO;
+		}
+		clk_enable(fimc->clock[i]);
+	}
+	return 0;
+}
+
+static int fimc_probe(struct platform_device *pdev)
+{
+	struct fimc_dev *fimc;
+	struct resource *res;
+	struct samsung_fimc_driverdata *drv_data;
+	int ret = 0;
+
+	dev_dbg(&pdev->dev, "%s():\n", __func__);
+
+	drv_data = (struct samsung_fimc_driverdata *)
+		platform_get_device_id(pdev)->driver_data;
+
+	if (pdev->id >= drv_data->devs_cnt) {
+		dev_err(&pdev->dev, "Invalid platform device id: %d\n",
+			pdev->id);
+		return -EINVAL;
+	}
+
+	fimc = kzalloc(sizeof(struct fimc_dev), GFP_KERNEL);
+	if (!fimc)
+		return -ENOMEM;
+
+	fimc->id = pdev->id;
+	fimc->variant = drv_data->variant[fimc->id];
+	fimc->pdev = pdev;
+	fimc->state = ST_IDLE;
+
+	spin_lock_init(&fimc->irqlock);
+	spin_lock_init(&fimc->slock);
+
+	mutex_init(&fimc->lock);
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (!res) {
+		dev_err(&pdev->dev, "failed to find the registers\n");
+		ret = -ENOENT;
+		goto err_info;
+	}
+
+	fimc->regs_res = request_mem_region(res->start, resource_size(res),
+			dev_name(&pdev->dev));
+	if (!fimc->regs_res) {
+		dev_err(&pdev->dev, "failed to obtain register region\n");
+		ret = -ENOENT;
+		goto err_info;
+	}
+
+	fimc->regs = ioremap(res->start, resource_size(res));
+	if (!fimc->regs) {
+		dev_err(&pdev->dev, "failed to map registers\n");
+		ret = -ENXIO;
+		goto err_req_region;
+	}
+
+	ret = fimc_clk_get(fimc);
+	if (ret)
+		goto err_regs_unmap;
+
+	res = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
+	if (!res) {
+		dev_err(&pdev->dev, "failed to get IRQ resource\n");
+		ret = -ENXIO;
+		goto err_clk;
+	}
+	fimc->irq = res->start;
+
+	fimc_hw_reset(fimc);
+
+	ret = request_irq(fimc->irq, fimc_isr, 0, pdev->name, fimc);
+	if (ret) {
+		dev_err(&pdev->dev, "failed to install irq (%d)\n", ret);
+		goto err_clk;
+	}
+
+	fimc->work_queue = create_workqueue(dev_name(&fimc->pdev->dev));
+	if (!fimc->work_queue)
+		goto err_irq;
+
+	ret = fimc_register_m2m_device(fimc);
+	if (ret)
+		goto err_wq;
+
+	fimc_hw_en_lastirq(fimc, true);
+
+	dev_dbg(&pdev->dev, "%s(): fimc-%d registered successfully\n",
+		__func__, fimc->id);
+
+	return 0;
+
+err_wq:
+	destroy_workqueue(fimc->work_queue);
+err_irq:
+	free_irq(fimc->irq, fimc);
+err_clk:
+	fimc_clk_release(fimc);
+err_regs_unmap:
+	iounmap(fimc->regs);
+err_req_region:
+	release_resource(fimc->regs_res);
+	kfree(fimc->regs_res);
+err_info:
+	kfree(fimc);
+	dev_err(&pdev->dev, "failed to install\n");
+	return ret;
+}
+
+static int __devexit fimc_remove(struct platform_device *pdev)
+{
+	struct fimc_dev *fimc =
+		(struct fimc_dev *)platform_get_drvdata(pdev);
+
+	v4l2_info(&fimc->m2m.v4l2_dev, "Removing %s\n", pdev->name);
+
+	free_irq(fimc->irq, fimc);
+
+	fimc_hw_reset(fimc);
+
+	fimc_unregister_m2m_device(fimc);
+	fimc_clk_release(fimc);
+	iounmap(fimc->regs);
+	release_resource(fimc->regs_res);
+	kfree(fimc->regs_res);
+	kfree(fimc);
+	return 0;
+}
+
+static struct samsung_fimc_variant fimc01_variant_s5p = {
+	.has_inp_rot	= 1,
+	.has_out_rot	= 1,
+	.min_inp_pixsize = 16,
+	.min_out_pixsize = 16,
+
+	.scaler_en_w	= 3264,
+	.scaler_dis_w	= 8192,
+	.in_rot_en_h	= 1920,
+	.in_rot_dis_w	= 8192,
+	.out_rot_en_w	= 1920,
+	.out_rot_dis_w	= 4224,
+};
+
+static struct samsung_fimc_variant fimc2_variant_s5p = {
+	.min_inp_pixsize = 16,
+	.min_out_pixsize = 16,
+
+	.scaler_en_w	= 4224,
+	.scaler_dis_w	= 8192,
+	.in_rot_en_h	= 1920,
+	.in_rot_dis_w	= 8192,
+	.out_rot_en_w	= 1920,
+	.out_rot_dis_w	= 4224,
+};
+
+static struct samsung_fimc_variant fimc01_variant_s5pv210 = {
+	.has_inp_rot	= 1,
+	.has_out_rot	= 1,
+	.min_inp_pixsize = 16,
+	.min_out_pixsize = 32,
+
+	.scaler_en_w	= 4224,
+	.scaler_dis_w	= 8192,
+	.in_rot_en_h	= 1920,
+	.in_rot_dis_w	= 8192,
+	.out_rot_en_w	= 1920,
+	.out_rot_dis_w	= 4224,
+};
+
+static struct samsung_fimc_variant fimc2_variant_s5pv210 = {
+	.min_inp_pixsize = 16,
+	.min_out_pixsize = 32,
+
+	.scaler_en_w	= 1920,
+	.scaler_dis_w	= 8192,
+	.in_rot_en_h	= 1280,
+	.in_rot_dis_w	= 8192,
+	.out_rot_en_w	= 1280,
+	.out_rot_dis_w	= 1920,
+};
+
+static struct samsung_fimc_driverdata fimc_drvdata_s5p = {
+	.variant = {
+		[0] = &fimc01_variant_s5p,
+		[1] = &fimc01_variant_s5p,
+		[2] = &fimc2_variant_s5p,
+	},
+	.devs_cnt = 3
+};
+
+static struct samsung_fimc_driverdata fimc_drvdata_s5pv210 = {
+	.variant = {
+		[0] = &fimc01_variant_s5pv210,
+		[1] = &fimc01_variant_s5pv210,
+		[2] = &fimc2_variant_s5pv210,
+	},
+	.devs_cnt = 3
+};
+
+static struct platform_device_id fimc_driver_ids[] = {
+	{
+		.name		= "s5p-fimc",
+		.driver_data	= (unsigned long)&fimc_drvdata_s5p,
+	}, {
+		.name		= "s5pv210-fimc",
+		.driver_data	= (unsigned long)&fimc_drvdata_s5pv210,
+	},
+	{},
+};
+MODULE_DEVICE_TABLE(platform, fimc_driver_ids);
+
+static struct platform_driver fimc_driver = {
+	.probe		= fimc_probe,
+	.remove	= __devexit_p(fimc_remove),
+	.id_table	= fimc_driver_ids,
+	.driver = {
+		.name	= MODULE_NAME,
+		.owner	= THIS_MODULE,
+	}
+};
+
+static char banner[] __initdata = KERN_INFO
+	"S5PC Camera Interface V4L2 Driver, (c) 2010 Samsung Electronics\n";
+
+static int __init fimc_init(void)
+{
+	u32 ret;
+	printk(banner);
+
+	ret = platform_driver_register(&fimc_driver);
+	if (ret) {
+		printk(KERN_ERR "FIMC platform driver register failed\n");
+		return -1;
+	}
+	return 0;
+}
+
+static void __exit fimc_exit(void)
+{
+	platform_driver_unregister(&fimc_driver);
+}
+
+module_init(fimc_init);
+module_exit(fimc_exit);
+
+MODULE_AUTHOR("Sylwester Nawrocki, s.nawrocki@samsung.com");
+MODULE_DESCRIPTION("S3C/S5P FIMC (video postprocessor) driver");
+MODULE_LICENSE("GPL");

drivers/media/video/s5p-fimc/fimc-core.h

@@ -0,0 +1,471 @@
+/*
+ * Copyright (c) 2010 Samsung Electronics
+ *
+ * Sylwester Nawrocki, <s.nawrocki@samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef FIMC_CORE_H_
+#define FIMC_CORE_H_
+
+#include <linux/types.h>
+#include <media/videobuf-core.h>
+#include <media/v4l2-device.h>
+#include <media/v4l2-mem2mem.h>
+#include <linux/videodev2.h>
+#include "regs-fimc.h"
+
+#define err(fmt, args...) \
+	printk(KERN_ERR "%s:%d: " fmt "\n", __func__, __LINE__, ##args)
+
+#ifdef DEBUG
+#define dbg(fmt, args...) \
+	printk(KERN_DEBUG "%s:%d: " fmt "\n", __func__, __LINE__, ##args)
+#else
+#define dbg(fmt, args...)
+#endif
+
+#define NUM_FIMC_CLOCKS		2
+#define MODULE_NAME		"s5p-fimc"
+#define FIMC_MAX_DEVS		3
+#define FIMC_MAX_OUT_BUFS	4
+#define SCALER_MAX_HRATIO	64
+#define SCALER_MAX_VRATIO	64
+
+enum {
+	ST_IDLE,
+	ST_OUTDMA_RUN,
+	ST_M2M_PEND,
+};
+
+#define fimc_m2m_active(dev) test_bit(ST_OUTDMA_RUN, &(dev)->state)
+#define fimc_m2m_pending(dev) test_bit(ST_M2M_PEND, &(dev)->state)
+
+enum fimc_datapath {
+	FIMC_ITU_CAM_A,
+	FIMC_ITU_CAM_B,
+	FIMC_MIPI_CAM,
+	FIMC_DMA,
+	FIMC_LCDFIFO,
+	FIMC_WRITEBACK
+};
+
+enum fimc_color_fmt {
+	S5P_FIMC_RGB565,
+	S5P_FIMC_RGB666,
+	S5P_FIMC_RGB888,
+	S5P_FIMC_YCBCR420,
+	S5P_FIMC_YCBCR422,
+	S5P_FIMC_YCBYCR422,
+	S5P_FIMC_YCRYCB422,
+	S5P_FIMC_CBYCRY422,
+	S5P_FIMC_CRYCBY422,
+	S5P_FIMC_RGB30_LOCAL,
+	S5P_FIMC_YCBCR444_LOCAL,
+	S5P_FIMC_MAX_COLOR = S5P_FIMC_YCBCR444_LOCAL,
+	S5P_FIMC_COLOR_MASK = 0x0F,
+};
+
+/* Y/Cb/Cr components order at DMA output for 1 plane YCbCr 4:2:2 formats. */
+#define	S5P_FIMC_OUT_CRYCBY	S5P_CIOCTRL_ORDER422_CRYCBY
+#define	S5P_FIMC_OUT_CBYCRY	S5P_CIOCTRL_ORDER422_YCRYCB
+#define	S5P_FIMC_OUT_YCRYCB	S5P_CIOCTRL_ORDER422_CBYCRY
+#define	S5P_FIMC_OUT_YCBYCR	S5P_CIOCTRL_ORDER422_YCBYCR
+
+/* Input Y/Cb/Cr components order for 1 plane YCbCr 4:2:2 color formats. */
+#define	S5P_FIMC_IN_CRYCBY	S5P_MSCTRL_ORDER422_CRYCBY
+#define	S5P_FIMC_IN_CBYCRY	S5P_MSCTRL_ORDER422_YCRYCB
+#define	S5P_FIMC_IN_YCRYCB	S5P_MSCTRL_ORDER422_CBYCRY
+#define	S5P_FIMC_IN_YCBYCR	S5P_MSCTRL_ORDER422_YCBYCR
+
+/* Cb/Cr chrominance components order for 2 plane Y/CbCr 4:2:2 formats. */
+#define	S5P_FIMC_LSB_CRCB	S5P_CIOCTRL_ORDER422_2P_LSB_CRCB
+
+/* The embedded image effect selection */
+#define	S5P_FIMC_EFFECT_ORIGINAL	S5P_CIIMGEFF_FIN_BYPASS
+#define	S5P_FIMC_EFFECT_ARBITRARY	S5P_CIIMGEFF_FIN_ARBITRARY
+#define	S5P_FIMC_EFFECT_NEGATIVE	S5P_CIIMGEFF_FIN_NEGATIVE
+#define	S5P_FIMC_EFFECT_ARTFREEZE	S5P_CIIMGEFF_FIN_ARTFREEZE
+#define	S5P_FIMC_EFFECT_EMBOSSING	S5P_CIIMGEFF_FIN_EMBOSSING
+#define	S5P_FIMC_EFFECT_SIKHOUETTE	S5P_CIIMGEFF_FIN_SILHOUETTE
+
+/* The hardware context state. */
+#define	FIMC_PARAMS			(1 << 0)
+#define	FIMC_SRC_ADDR			(1 << 1)
+#define	FIMC_DST_ADDR			(1 << 2)
+#define	FIMC_SRC_FMT			(1 << 3)
+#define	FIMC_DST_FMT			(1 << 4)
+
+/* Image conversion flags */
+#define	FIMC_IN_DMA_ACCESS_TILED	(1 << 0)
+#define	FIMC_IN_DMA_ACCESS_LINEAR	(0 << 0)
+#define	FIMC_OUT_DMA_ACCESS_TILED	(1 << 1)
+#define	FIMC_OUT_DMA_ACCESS_LINEAR	(0 << 1)
+#define	FIMC_SCAN_MODE_PROGRESSIVE	(0 << 2)
+#define	FIMC_SCAN_MODE_INTERLACED	(1 << 2)
+/* YCbCr data dynamic range for RGB-YUV color conversion. Y/Cb/Cr: (0 ~ 255) */
+#define	FIMC_COLOR_RANGE_WIDE		(0 << 3)
+/* Y (16 ~ 235), Cb/Cr (16 ~ 240) */
+#define	FIMC_COLOR_RANGE_NARROW		(1 << 3)
+
+#define	FLIP_NONE			0
+#define	FLIP_X_AXIS			1
+#define	FLIP_Y_AXIS			2
+#define	FLIP_XY_AXIS			(FLIP_X_AXIS | FLIP_Y_AXIS)
+
+/**
+ * struct fimc_fmt - the driver's internal color format data
+ * @name: format description
+ * @fourcc: the fourcc code for this format
+ * @color: the corresponding fimc_color_fmt
+ * @depth: number of bits per pixel
+ * @buff_cnt: number of physically non-contiguous data planes
+ * @planes_cnt: number of physically contiguous data planes
+ */
+struct fimc_fmt {
+	char	*name;
+	u32	fourcc;
+	u32	color;
+	u32	depth;
+	u16	buff_cnt;
+	u16	planes_cnt;
+};
+
+/**
+ * struct fimc_dma_offset - pixel offset information for DMA
+ * @y_h:	y value horizontal offset
+ * @y_v:	y value vertical offset
+ * @cb_h:	cb value horizontal offset
+ * @cb_v:	cb value vertical offset
+ * @cr_h:	cr value horizontal offset
+ * @cr_v:	cr value vertical offset
+ */
+struct fimc_dma_offset {
+	int	y_h;
+	int	y_v;
+	int	cb_h;
+	int	cb_v;
+	int	cr_h;
+	int	cr_v;
+};
+
+/**
+ * struct fimc_effect - the configuration data for the "Arbitrary" image effect
+ * @type:	effect type
+ * @pat_cb:	cr value when type is "arbitrary"
+ * @pat_cr:	cr value when type is "arbitrary"
+ */
+struct fimc_effect {
+	u32	type;
+	u8	pat_cb;
+	u8	pat_cr;
+};
+
+/**
+ * struct fimc_scaler - the configuration data for FIMC inetrnal scaler
+ *
+ * @enabled:		the flag set when the scaler is used
+ * @hfactor:		horizontal shift factor
+ * @vfactor:		vertical shift factor
+ * @pre_hratio:		horizontal ratio of the prescaler
+ * @pre_vratio:		vertical ratio of the prescaler
+ * @pre_dst_width:	the prescaler's destination width
+ * @pre_dst_height:	the prescaler's destination height
+ * @scaleup_h:		flag indicating scaling up horizontally
+ * @scaleup_v:		flag indicating scaling up vertically
+ * @main_hratio:	the main scaler's horizontal ratio
+ * @main_vratio:	the main scaler's vertical ratio
+ * @real_width:		source width - offset
+ * @real_height:	source height - offset
+ * @copy_mode:		flag set if one-to-one mode is used, i.e. no scaling
+ *			and color format conversion
+ */
+struct fimc_scaler {
+	u32	enabled;
+	u32	hfactor;
+	u32	vfactor;
+	u32	pre_hratio;
+	u32	pre_vratio;
+	u32	pre_dst_width;
+	u32	pre_dst_height;
+	u32	scaleup_h;
+	u32	scaleup_v;
+	u32	main_hratio;
+	u32	main_vratio;
+	u32	real_width;
+	u32	real_height;
+	u32	copy_mode;
+};
+
+/**
+ * struct fimc_addr - the FIMC physical address set for DMA
+ *
+ * @y:	 luminance plane physical address
+ * @cb:	 Cb plane physical address
+ * @cr:	 Cr plane physical address
+ */
+struct fimc_addr {
+	u32	y;
+	u32	cb;
+	u32	cr;
+};
+
+/**
+ * struct fimc_vid_buffer - the driver's video buffer
+ * @vb:	v4l videobuf buffer
+ */
+struct fimc_vid_buffer {
+	struct videobuf_buffer	vb;
+};
+
+/**
+ * struct fimc_frame - input/output frame format properties
+ *
+ * @f_width:	image full width (virtual screen size)
+ * @f_height:	image full height (virtual screen size)
+ * @o_width:	original image width as set by S_FMT
+ * @o_height:	original image height as set by S_FMT
+ * @offs_h:	image horizontal pixel offset
+ * @offs_v:	image vertical pixel offset
+ * @width:	image pixel width
+ * @height:	image pixel weight
+ * @paddr:	image frame buffer physical addresses
+ * @buf_cnt:	number of buffers depending on a color format
+ * @size:	image size in bytes
+ * @color:	color format
+ * @dma_offset:	DMA offset in bytes
+ */
+struct fimc_frame {
+	u32	f_width;
+	u32	f_height;
+	u32	o_width;
+	u32	o_height;
+	u32	offs_h;
+	u32	offs_v;
+	u32	width;
+	u32	height;
+	u32	size;
+	struct fimc_addr	paddr;
+	struct fimc_dma_offset	dma_offset;
+	struct fimc_fmt		*fmt;
+};
+
+/**
+ * struct fimc_m2m_device - v4l2 memory-to-memory device data
+ * @vfd: the video device node for v4l2 m2m mode
+ * @v4l2_dev: v4l2 device for m2m mode
+ * @m2m_dev: v4l2 memory-to-memory device data
+ * @ctx: hardware context data
+ * @refcnt: the reference counter
+ */
+struct fimc_m2m_device {
+	struct video_device	*vfd;
+	struct v4l2_device	v4l2_dev;
+	struct v4l2_m2m_dev	*m2m_dev;
+	struct fimc_ctx		*ctx;
+	int			refcnt;
+};
+
+/**
+ * struct samsung_fimc_variant - camera interface variant information
+ *
+ * @pix_hoff: indicate whether horizontal offset is in pixels or in bytes
+ * @has_inp_rot: set if has input rotator
+ * @has_out_rot: set if has output rotator
+ * @min_inp_pixsize: minimum input pixel size
+ * @min_out_pixsize: minimum output pixel size
+ * @scaler_en_w: maximum input pixel width when the scaler is enabled
+ * @scaler_dis_w: maximum input pixel width when the scaler is disabled
+ * @in_rot_en_h: maximum input width when the input rotator is used
+ * @in_rot_dis_w: maximum input width when the input rotator is used
+ * @out_rot_en_w: maximum output width for the output rotator enabled
+ * @out_rot_dis_w: maximum output width for the output rotator enabled
+ */
+struct samsung_fimc_variant {
+	unsigned int	pix_hoff:1;
+	unsigned int	has_inp_rot:1;
+	unsigned int	has_out_rot:1;
+
+	u16		min_inp_pixsize;
+	u16		min_out_pixsize;
+	u16		scaler_en_w;
+	u16		scaler_dis_w;
+	u16		in_rot_en_h;
+	u16		in_rot_dis_w;
+	u16		out_rot_en_w;
+	u16		out_rot_dis_w;
+};
+
+/**
+ * struct samsung_fimc_driverdata - per-device type driver data for init time.
+ *
+ * @variant: the variant information for this driver.
+ * @dev_cnt: number of fimc sub-devices available in SoC
+ */
+struct samsung_fimc_driverdata {
+	struct samsung_fimc_variant *variant[FIMC_MAX_DEVS];
+	int	devs_cnt;
+};
+
+struct fimc_ctx;
+
+/**
+ * struct fimc_subdev - abstraction for a FIMC entity
+ *
+ * @slock:	the spinlock protecting this data structure
+ * @lock:	the mutex protecting this data structure
+ * @pdev:	pointer to the FIMC platform device
+ * @id:		FIMC device index (0..2)
+ * @clock[]:	the clocks required for FIMC operation
+ * @regs:	the mapped hardware registers
+ * @regs_res:	the resource claimed for IO registers
+ * @irq:	interrupt number of the FIMC subdevice
+ * @irqlock:	spinlock protecting videbuffer queue
+ * @m2m:	memory-to-memory V4L2 device information
+ * @state:	the FIMC device state flags
+ */
+struct fimc_dev {
+	spinlock_t			slock;
+	struct mutex			lock;
+	struct platform_device		*pdev;
+	struct samsung_fimc_variant	*variant;
+	int				id;
+	struct clk			*clock[NUM_FIMC_CLOCKS];
+	void __iomem			*regs;
+	struct resource			*regs_res;
+	int				irq;
+	spinlock_t			irqlock;
+	struct workqueue_struct		*work_queue;
+	struct fimc_m2m_device		m2m;
+	unsigned long			state;
+};
+
+/**
+ * fimc_ctx - the device context data
+ *
+ * @lock:		mutex protecting this data structure
+ * @s_frame:		source frame properties
+ * @d_frame:		destination frame properties
+ * @out_order_1p:	output 1-plane YCBCR order
+ * @out_order_2p:	output 2-plane YCBCR order
+ * @in_order_1p		input 1-plane YCBCR order
+ * @in_order_2p:	input 2-plane YCBCR order
+ * @in_path:		input mode (DMA or camera)
+ * @out_path:		output mode (DMA or FIFO)
+ * @scaler:		image scaler properties
+ * @effect:		image effect
+ * @rotation:		image clockwise rotation in degrees
+ * @flip:		image flip mode
+ * @flags:		an additional flags for image conversion
+ * @state:		flags to keep track of user configuration
+ * @fimc_dev:		the FIMC device this context applies to
+ * @m2m_ctx:		memory-to-memory device context
+ */
+struct fimc_ctx {
+	spinlock_t		slock;
+	struct fimc_frame	s_frame;
+	struct fimc_frame	d_frame;
+	u32			out_order_1p;
+	u32			out_order_2p;
+	u32			in_order_1p;
+	u32			in_order_2p;
+	enum fimc_datapath	in_path;
+	enum fimc_datapath	out_path;
+	struct fimc_scaler	scaler;
+	struct fimc_effect	effect;
+	int			rotation;
+	u32			flip;
+	u32			flags;
+	u32			state;
+	struct fimc_dev		*fimc_dev;
+	struct v4l2_m2m_ctx	*m2m_ctx;
+};
+
+
+static inline int tiled_fmt(struct fimc_fmt *fmt)
+{
+	return 0;
+}
+
+static inline void fimc_hw_clear_irq(struct fimc_dev *dev)
+{
+	u32 cfg = readl(dev->regs + S5P_CIGCTRL);
+	cfg |= S5P_CIGCTRL_IRQ_CLR;
+	writel(cfg, dev->regs + S5P_CIGCTRL);
+}
+
+static inline void fimc_hw_start_scaler(struct fimc_dev *dev)
+{
+	u32 cfg = readl(dev->regs + S5P_CISCCTRL);
+	cfg |= S5P_CISCCTRL_SCALERSTART;
+	writel(cfg, dev->regs + S5P_CISCCTRL);
+}
+
+static inline void fimc_hw_stop_scaler(struct fimc_dev *dev)
+{
+	u32 cfg = readl(dev->regs + S5P_CISCCTRL);
+	cfg &= ~S5P_CISCCTRL_SCALERSTART;
+	writel(cfg, dev->regs + S5P_CISCCTRL);
+}
+
+static inline void fimc_hw_dis_capture(struct fimc_dev *dev)
+{
+	u32 cfg = readl(dev->regs + S5P_CIIMGCPT);
+	cfg &= ~(S5P_CIIMGCPT_IMGCPTEN | S5P_CIIMGCPT_IMGCPTEN_SC);
+	writel(cfg, dev->regs + S5P_CIIMGCPT);
+}
+
+static inline void fimc_hw_start_in_dma(struct fimc_dev *dev)
+{
+	u32 cfg = readl(dev->regs + S5P_MSCTRL);
+	cfg |= S5P_MSCTRL_ENVID;
+	writel(cfg, dev->regs + S5P_MSCTRL);
+}
+
+static inline void fimc_hw_stop_in_dma(struct fimc_dev *dev)
+{
+	u32 cfg = readl(dev->regs + S5P_MSCTRL);
+	cfg &= ~S5P_MSCTRL_ENVID;
+	writel(cfg, dev->regs + S5P_MSCTRL);
+}
+
+static inline struct fimc_frame *ctx_m2m_get_frame(struct fimc_ctx *ctx,
+						   enum v4l2_buf_type type)
+{
+	struct fimc_frame *frame;
+
+	if (V4L2_BUF_TYPE_VIDEO_OUTPUT == type) {
+		frame = &ctx->s_frame;
+	} else if (V4L2_BUF_TYPE_VIDEO_CAPTURE == type) {
+		frame = &ctx->d_frame;
+	} else {
+		v4l2_err(&ctx->fimc_dev->m2m.v4l2_dev,
+			"Wrong buffer/video queue type (%d)\n", type);
+		return ERR_PTR(-EINVAL);
+	}
+
+	return frame;
+}
+
+/* -----------------------------------------------------*/
+/* fimc-reg.c						*/
+void fimc_hw_reset(struct fimc_dev *dev);
+void fimc_hw_set_rotation(struct fimc_ctx *ctx);
+void fimc_hw_set_target_format(struct fimc_ctx *ctx);
+void fimc_hw_set_out_dma(struct fimc_ctx *ctx);
+void fimc_hw_en_lastirq(struct fimc_dev *dev, int enable);
+void fimc_hw_en_irq(struct fimc_dev *dev, int enable);
+void fimc_hw_set_prescaler(struct fimc_ctx *ctx);
+void fimc_hw_set_scaler(struct fimc_ctx *ctx);
+void fimc_hw_en_capture(struct fimc_ctx *ctx);
+void fimc_hw_set_effect(struct fimc_ctx *ctx);
+void fimc_hw_set_in_dma(struct fimc_ctx *ctx);
+void fimc_hw_set_input_path(struct fimc_ctx *ctx);
+void fimc_hw_set_output_path(struct fimc_ctx *ctx);
+void fimc_hw_set_input_addr(struct fimc_dev *dev, struct fimc_addr *paddr);
+void fimc_hw_set_output_addr(struct fimc_dev *dev, struct fimc_addr *paddr);
+
+#endif /* FIMC_CORE_H_ */

drivers/media/video/s5p-fimc/fimc-reg.c

@@ -0,0 +1,527 @@
+/*
+ * Register interface file for Samsung Camera Interface (FIMC) driver
+ *
+ * Copyright (c) 2010 Samsung Electronics
+ *
+ * Sylwester Nawrocki, s.nawrocki@samsung.com
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/io.h>
+#include <linux/delay.h>
+#include <mach/map.h>
+
+#include "fimc-core.h"
+
+
+void fimc_hw_reset(struct fimc_dev *dev)
+{
+	u32 cfg;
+
+	cfg = readl(dev->regs + S5P_CISRCFMT);
+	cfg |= S5P_CISRCFMT_ITU601_8BIT;
+	writel(cfg, dev->regs + S5P_CISRCFMT);
+
+	/* Software reset. */
+	cfg = readl(dev->regs + S5P_CIGCTRL);
+	cfg |= (S5P_CIGCTRL_SWRST | S5P_CIGCTRL_IRQ_LEVEL);
+	writel(cfg, dev->regs + S5P_CIGCTRL);
+	msleep(1);
+
+	cfg = readl(dev->regs + S5P_CIGCTRL);
+	cfg &= ~S5P_CIGCTRL_SWRST;
+	writel(cfg, dev->regs + S5P_CIGCTRL);
+
+}
+
+void fimc_hw_set_rotation(struct fimc_ctx *ctx)
+{
+	u32 cfg, flip;
+	struct fimc_dev *dev = ctx->fimc_dev;
+
+	cfg = readl(dev->regs + S5P_CITRGFMT);
+	cfg &= ~(S5P_CITRGFMT_INROT90 | S5P_CITRGFMT_OUTROT90);
+
+	flip = readl(dev->regs + S5P_MSCTRL);
+	flip &= ~S5P_MSCTRL_FLIP_MASK;
+
+	/*
+	 * The input and output rotator cannot work simultaneously.
+	 * Use the output rotator in output DMA mode or the input rotator
+	 * in direct fifo output mode.
+	 */
+	if (ctx->rotation == 90 || ctx->rotation == 270) {
+		if (ctx->out_path == FIMC_LCDFIFO) {
+			cfg |= S5P_CITRGFMT_INROT90;
+			if (ctx->rotation == 270)
+				flip |= S5P_MSCTRL_FLIP_180;
+		} else {
+			cfg |= S5P_CITRGFMT_OUTROT90;
+			if (ctx->rotation == 270)
+				cfg |= S5P_CITRGFMT_FLIP_180;
+		}
+	} else if (ctx->rotation == 180) {
+		if (ctx->out_path == FIMC_LCDFIFO)
+			flip |= S5P_MSCTRL_FLIP_180;
+		else
+			cfg |= S5P_CITRGFMT_FLIP_180;
+	}
+	if (ctx->rotation == 180 || ctx->rotation == 270)
+		writel(flip, dev->regs + S5P_MSCTRL);
+	writel(cfg, dev->regs + S5P_CITRGFMT);
+}
+
+static u32 fimc_hw_get_in_flip(u32 ctx_flip)
+{
+	u32 flip = S5P_MSCTRL_FLIP_NORMAL;
+
+	switch (ctx_flip) {
+	case FLIP_X_AXIS:
+		flip = S5P_MSCTRL_FLIP_X_MIRROR;
+		break;
+	case FLIP_Y_AXIS:
+		flip = S5P_MSCTRL_FLIP_Y_MIRROR;
+		break;
+	case FLIP_XY_AXIS:
+		flip = S5P_MSCTRL_FLIP_180;
+		break;
+	}
+
+	return flip;
+}
+
+static u32 fimc_hw_get_target_flip(u32 ctx_flip)
+{
+	u32 flip = S5P_CITRGFMT_FLIP_NORMAL;
+
+	switch (ctx_flip) {
+	case FLIP_X_AXIS:
+		flip = S5P_CITRGFMT_FLIP_X_MIRROR;
+		break;
+	case FLIP_Y_AXIS:
+		flip = S5P_CITRGFMT_FLIP_Y_MIRROR;
+		break;
+	case FLIP_XY_AXIS:
+		flip = S5P_CITRGFMT_FLIP_180;
+		break;
+	case FLIP_NONE:
+		break;
+
+	}
+	return flip;
+}
+
+void fimc_hw_set_target_format(struct fimc_ctx *ctx)
+{
+	u32 cfg;
+	struct fimc_dev *dev = ctx->fimc_dev;
+	struct fimc_frame *frame = &ctx->d_frame;
+
+	dbg("w= %d, h= %d color: %d", frame->width,
+		frame->height, frame->fmt->color);
+
+	cfg = readl(dev->regs + S5P_CITRGFMT);
+	cfg &= ~(S5P_CITRGFMT_FMT_MASK | S5P_CITRGFMT_HSIZE_MASK |
+		  S5P_CITRGFMT_VSIZE_MASK);
+
+	switch (frame->fmt->color) {
+	case S5P_FIMC_RGB565:
+	case S5P_FIMC_RGB666:
+	case S5P_FIMC_RGB888:
+		cfg |= S5P_CITRGFMT_RGB;
+		break;
+	case S5P_FIMC_YCBCR420:
+		cfg |= S5P_CITRGFMT_YCBCR420;
+		break;
+	case S5P_FIMC_YCBYCR422:
+	case S5P_FIMC_YCRYCB422:
+	case S5P_FIMC_CBYCRY422:
+	case S5P_FIMC_CRYCBY422:
+		if (frame->fmt->planes_cnt == 1)
+			cfg |= S5P_CITRGFMT_YCBCR422_1P;
+		else
+			cfg |= S5P_CITRGFMT_YCBCR422;
+		break;
+	default:
+		break;
+	}
+
+	cfg |= S5P_CITRGFMT_HSIZE(frame->width);
+	cfg |= S5P_CITRGFMT_VSIZE(frame->height);
+
+	if (ctx->rotation == 0) {
+		cfg &= ~S5P_CITRGFMT_FLIP_MASK;
+		cfg |= fimc_hw_get_target_flip(ctx->flip);
+	}
+	writel(cfg, dev->regs + S5P_CITRGFMT);
+
+	cfg = readl(dev->regs + S5P_CITAREA) & ~S5P_CITAREA_MASK;
+	cfg |= (frame->width * frame->height);
+	writel(cfg, dev->regs + S5P_CITAREA);
+}
+
+static void fimc_hw_set_out_dma_size(struct fimc_ctx *ctx)
+{
+	struct fimc_dev *dev = ctx->fimc_dev;
+	struct fimc_frame *frame = &ctx->d_frame;
+	u32 cfg = 0;
+
+	if (ctx->rotation == 90 || ctx->rotation == 270) {
+		cfg |= S5P_ORIG_SIZE_HOR(frame->f_height);
+		cfg |= S5P_ORIG_SIZE_VER(frame->f_width);
+	} else {
+		cfg |= S5P_ORIG_SIZE_HOR(frame->f_width);
+		cfg |= S5P_ORIG_SIZE_VER(frame->f_height);
+	}
+	writel(cfg, dev->regs + S5P_ORGOSIZE);
+}
+
+void fimc_hw_set_out_dma(struct fimc_ctx *ctx)
+{
+	u32 cfg;
+	struct fimc_dev *dev = ctx->fimc_dev;
+	struct fimc_frame *frame = &ctx->d_frame;
+	struct fimc_dma_offset *offset = &frame->dma_offset;
+
+	/* Set the input dma offsets. */
+	cfg = 0;
+	cfg |= S5P_CIO_OFFS_HOR(offset->y_h);
+	cfg |= S5P_CIO_OFFS_VER(offset->y_v);
+	writel(cfg, dev->regs + S5P_CIOYOFF);
+
+	cfg = 0;
+	cfg |= S5P_CIO_OFFS_HOR(offset->cb_h);
+	cfg |= S5P_CIO_OFFS_VER(offset->cb_v);
+	writel(cfg, dev->regs + S5P_CIOCBOFF);
+
+	cfg = 0;
+	cfg |= S5P_CIO_OFFS_HOR(offset->cr_h);
+	cfg |= S5P_CIO_OFFS_VER(offset->cr_v);
+	writel(cfg, dev->regs + S5P_CIOCROFF);
+
+	fimc_hw_set_out_dma_size(ctx);
+
+	/* Configure chroma components order. */
+	cfg = readl(dev->regs + S5P_CIOCTRL);
+
+	cfg &= ~(S5P_CIOCTRL_ORDER2P_MASK | S5P_CIOCTRL_ORDER422_MASK |
+		 S5P_CIOCTRL_YCBCR_PLANE_MASK);
+
+	if (frame->fmt->planes_cnt == 1)
+		cfg |= ctx->out_order_1p;
+	else if (frame->fmt->planes_cnt == 2)
+		cfg |= ctx->out_order_2p | S5P_CIOCTRL_YCBCR_2PLANE;
+	else if (frame->fmt->planes_cnt == 3)
+		cfg |= S5P_CIOCTRL_YCBCR_3PLANE;
+
+	writel(cfg, dev->regs + S5P_CIOCTRL);
+}
+
+static void fimc_hw_en_autoload(struct fimc_dev *dev, int enable)
+{
+	u32 cfg = readl(dev->regs + S5P_ORGISIZE);
+	if (enable)
+		cfg |= S5P_CIREAL_ISIZE_AUTOLOAD_EN;
+	else
+		cfg &= ~S5P_CIREAL_ISIZE_AUTOLOAD_EN;
+	writel(cfg, dev->regs + S5P_ORGISIZE);
+}
+
+void fimc_hw_en_lastirq(struct fimc_dev *dev, int enable)
+{
+	unsigned long flags;
+	u32 cfg;
+
+	spin_lock_irqsave(&dev->slock, flags);
+
+	cfg = readl(dev->regs + S5P_CIOCTRL);
+	if (enable)
+		cfg |= S5P_CIOCTRL_LASTIRQ_ENABLE;
+	else
+		cfg &= ~S5P_CIOCTRL_LASTIRQ_ENABLE;
+	writel(cfg, dev->regs + S5P_CIOCTRL);
+
+	spin_unlock_irqrestore(&dev->slock, flags);
+}
+
+void fimc_hw_set_prescaler(struct fimc_ctx *ctx)
+{
+	struct fimc_dev *dev =  ctx->fimc_dev;
+	struct fimc_scaler *sc = &ctx->scaler;
+	u32 cfg = 0, shfactor;
+
+	shfactor = 10 - (sc->hfactor + sc->vfactor);
+
+	cfg |= S5P_CISCPRERATIO_SHFACTOR(shfactor);
+	cfg |= S5P_CISCPRERATIO_HOR(sc->pre_hratio);
+	cfg |= S5P_CISCPRERATIO_VER(sc->pre_vratio);
+	writel(cfg, dev->regs + S5P_CISCPRERATIO);
+
+	cfg = 0;
+	cfg |= S5P_CISCPREDST_WIDTH(sc->pre_dst_width);
+	cfg |= S5P_CISCPREDST_HEIGHT(sc->pre_dst_height);
+	writel(cfg, dev->regs + S5P_CISCPREDST);
+}
+
+void fimc_hw_set_scaler(struct fimc_ctx *ctx)
+{
+	struct fimc_dev *dev = ctx->fimc_dev;
+	struct fimc_scaler *sc = &ctx->scaler;
+	struct fimc_frame *src_frame = &ctx->s_frame;
+	struct fimc_frame *dst_frame = &ctx->d_frame;
+	u32 cfg = 0;
+
+	if (!(ctx->flags & FIMC_COLOR_RANGE_NARROW))
+		cfg |= (S5P_CISCCTRL_CSCR2Y_WIDE | S5P_CISCCTRL_CSCY2R_WIDE);
+
+	if (!sc->enabled)
+		cfg |= S5P_CISCCTRL_SCALERBYPASS;
+
+	if (sc->scaleup_h)
+		cfg |= S5P_CISCCTRL_SCALEUP_H;
+
+	if (sc->scaleup_v)
+		cfg |= S5P_CISCCTRL_SCALEUP_V;
+
+	if (sc->copy_mode)
+		cfg |= S5P_CISCCTRL_ONE2ONE;
+
+
+	if (ctx->in_path == FIMC_DMA) {
+		if (src_frame->fmt->color == S5P_FIMC_RGB565)
+			cfg |= S5P_CISCCTRL_INRGB_FMT_RGB565;
+		else if (src_frame->fmt->color == S5P_FIMC_RGB666)
+			cfg |= S5P_CISCCTRL_INRGB_FMT_RGB666;
+		else if (src_frame->fmt->color == S5P_FIMC_RGB888)
+			cfg |= S5P_CISCCTRL_INRGB_FMT_RGB888;
+	}
+
+	if (ctx->out_path == FIMC_DMA) {
+		if (dst_frame->fmt->color == S5P_FIMC_RGB565)
+			cfg |= S5P_CISCCTRL_OUTRGB_FMT_RGB565;
+		else if (dst_frame->fmt->color == S5P_FIMC_RGB666)
+			cfg |= S5P_CISCCTRL_OUTRGB_FMT_RGB666;
+		else if (dst_frame->fmt->color == S5P_FIMC_RGB888)
+			cfg |= S5P_CISCCTRL_OUTRGB_FMT_RGB888;
+	} else {
+		cfg |= S5P_CISCCTRL_OUTRGB_FMT_RGB888;
+
+		if (ctx->flags & FIMC_SCAN_MODE_INTERLACED)
+			cfg |= S5P_CISCCTRL_INTERLACE;
+	}
+
+	dbg("main_hratio= 0x%X  main_vratio= 0x%X",
+		sc->main_hratio, sc->main_vratio);
+
+	cfg |= S5P_CISCCTRL_SC_HORRATIO(sc->main_hratio);
+	cfg |= S5P_CISCCTRL_SC_VERRATIO(sc->main_vratio);
+
+	writel(cfg, dev->regs + S5P_CISCCTRL);
+}
+
+void fimc_hw_en_capture(struct fimc_ctx *ctx)
+{
+	struct fimc_dev *dev = ctx->fimc_dev;
+	u32 cfg;
+
+	cfg = readl(dev->regs + S5P_CIIMGCPT);
+	/* One shot mode for output DMA or freerun for FIFO. */
+	if (ctx->out_path == FIMC_DMA)
+		cfg |= S5P_CIIMGCPT_CPT_FREN_ENABLE;
+	else
+		cfg &= ~S5P_CIIMGCPT_CPT_FREN_ENABLE;
+
+	if (ctx->scaler.enabled)
+		cfg |= S5P_CIIMGCPT_IMGCPTEN_SC;
+
+	writel(cfg | S5P_CIIMGCPT_IMGCPTEN, dev->regs + S5P_CIIMGCPT);
+}
+
+void fimc_hw_set_effect(struct fimc_ctx *ctx)
+{
+	struct fimc_dev *dev = ctx->fimc_dev;
+	struct fimc_effect *effect = &ctx->effect;
+	u32 cfg = (S5P_CIIMGEFF_IE_ENABLE | S5P_CIIMGEFF_IE_SC_AFTER);
+
+	cfg |= effect->type;
+
+	if (effect->type == S5P_FIMC_EFFECT_ARBITRARY) {
+		cfg |= S5P_CIIMGEFF_PAT_CB(effect->pat_cb);
+		cfg |= S5P_CIIMGEFF_PAT_CR(effect->pat_cr);
+	}
+
+	writel(cfg, dev->regs + S5P_CIIMGEFF);
+}
+
+static void fimc_hw_set_in_dma_size(struct fimc_ctx *ctx)
+{
+	struct fimc_dev *dev = ctx->fimc_dev;
+	struct fimc_frame *frame = &ctx->s_frame;
+	u32 cfg_o = 0;
+	u32 cfg_r = 0;
+
+	if (FIMC_LCDFIFO == ctx->out_path)
+		cfg_r |=  S5P_CIREAL_ISIZE_AUTOLOAD_EN;
+
+	cfg_o |= S5P_ORIG_SIZE_HOR(frame->f_width);
+	cfg_o |= S5P_ORIG_SIZE_VER(frame->f_height);
+	cfg_r |= S5P_CIREAL_ISIZE_WIDTH(frame->width);
+	cfg_r |= S5P_CIREAL_ISIZE_HEIGHT(frame->height);
+
+	writel(cfg_o, dev->regs + S5P_ORGISIZE);
+	writel(cfg_r, dev->regs + S5P_CIREAL_ISIZE);
+}
+
+void fimc_hw_set_in_dma(struct fimc_ctx *ctx)
+{
+	struct fimc_dev *dev = ctx->fimc_dev;
+	struct fimc_frame *frame = &ctx->s_frame;
+	struct fimc_dma_offset *offset = &frame->dma_offset;
+	u32 cfg = 0;
+
+	/* Set the pixel offsets. */
+	cfg |= S5P_CIO_OFFS_HOR(offset->y_h);
+	cfg |= S5P_CIO_OFFS_VER(offset->y_v);
+	writel(cfg, dev->regs + S5P_CIIYOFF);
+
+	cfg = 0;
+	cfg |= S5P_CIO_OFFS_HOR(offset->cb_h);
+	cfg |= S5P_CIO_OFFS_VER(offset->cb_v);
+	writel(cfg, dev->regs + S5P_CIICBOFF);
+
+	cfg = 0;
+	cfg |= S5P_CIO_OFFS_HOR(offset->cr_h);
+	cfg |= S5P_CIO_OFFS_VER(offset->cr_v);
+	writel(cfg, dev->regs + S5P_CIICROFF);
+
+	/* Input original and real size. */
+	fimc_hw_set_in_dma_size(ctx);
+
+	/* Autoload is used currently only in FIFO mode. */
+	fimc_hw_en_autoload(dev, ctx->out_path == FIMC_LCDFIFO);
+
+	/* Set the input DMA to process single frame only. */
+	cfg = readl(dev->regs + S5P_MSCTRL);
+	cfg &= ~(S5P_MSCTRL_FLIP_MASK
+		| S5P_MSCTRL_INFORMAT_MASK
+		| S5P_MSCTRL_IN_BURST_COUNT_MASK
+		| S5P_MSCTRL_INPUT_MASK
+		| S5P_MSCTRL_C_INT_IN_MASK
+		| S5P_MSCTRL_2P_IN_ORDER_MASK);
+
+	cfg |= (S5P_MSCTRL_FRAME_COUNT(1) | S5P_MSCTRL_INPUT_MEMORY);
+
+	switch (frame->fmt->color) {
+	case S5P_FIMC_RGB565:
+	case S5P_FIMC_RGB666:
+	case S5P_FIMC_RGB888:
+		cfg |= S5P_MSCTRL_INFORMAT_RGB;
+		break;
+	case S5P_FIMC_YCBCR420:
+		cfg |= S5P_MSCTRL_INFORMAT_YCBCR420;
+
+		if (frame->fmt->planes_cnt == 2)
+			cfg |= ctx->in_order_2p | S5P_MSCTRL_C_INT_IN_2PLANE;
+		else
+			cfg |= S5P_MSCTRL_C_INT_IN_3PLANE;
+
+		break;
+	case S5P_FIMC_YCBYCR422:
+	case S5P_FIMC_YCRYCB422:
+	case S5P_FIMC_CBYCRY422:
+	case S5P_FIMC_CRYCBY422:
+		if (frame->fmt->planes_cnt == 1) {
+			cfg |= ctx->in_order_1p
+				| S5P_MSCTRL_INFORMAT_YCBCR422_1P;
+		} else {
+			cfg |= S5P_MSCTRL_INFORMAT_YCBCR422;
+
+			if (frame->fmt->planes_cnt == 2)
+				cfg |= ctx->in_order_2p
+					| S5P_MSCTRL_C_INT_IN_2PLANE;
+			else
+				cfg |= S5P_MSCTRL_C_INT_IN_3PLANE;
+		}
+		break;
+	default:
+		break;
+	}
+
+	/*
+	 * Input DMA flip mode (and rotation).
+	 * Do not allow simultaneous rotation and flipping.
+	 */
+	if (!ctx->rotation && ctx->out_path == FIMC_LCDFIFO)
+		cfg |= fimc_hw_get_in_flip(ctx->flip);
+
+	writel(cfg, dev->regs + S5P_MSCTRL);
+
+	/* Input/output DMA linear/tiled mode. */
+	cfg = readl(dev->regs + S5P_CIDMAPARAM);
+	cfg &= ~S5P_CIDMAPARAM_TILE_MASK;
+
+	if (tiled_fmt(ctx->s_frame.fmt))
+		cfg |= S5P_CIDMAPARAM_R_64X32;
+
+	if (tiled_fmt(ctx->d_frame.fmt))
+		cfg |= S5P_CIDMAPARAM_W_64X32;
+
+	writel(cfg, dev->regs + S5P_CIDMAPARAM);
+}
+
+
+void fimc_hw_set_input_path(struct fimc_ctx *ctx)
+{
+	struct fimc_dev *dev = ctx->fimc_dev;
+
+	u32 cfg = readl(dev->regs + S5P_MSCTRL);
+	cfg &= ~S5P_MSCTRL_INPUT_MASK;
+
+	if (ctx->in_path == FIMC_DMA)
+		cfg |= S5P_MSCTRL_INPUT_MEMORY;
+	else
+		cfg |= S5P_MSCTRL_INPUT_EXTCAM;
+
+	writel(cfg, dev->regs + S5P_MSCTRL);
+}
+
+void fimc_hw_set_output_path(struct fimc_ctx *ctx)
+{
+	struct fimc_dev *dev = ctx->fimc_dev;
+
+	u32 cfg = readl(dev->regs + S5P_CISCCTRL);
+	cfg &= ~S5P_CISCCTRL_LCDPATHEN_FIFO;
+	if (ctx->out_path == FIMC_LCDFIFO)
+		cfg |= S5P_CISCCTRL_LCDPATHEN_FIFO;
+	writel(cfg, dev->regs + S5P_CISCCTRL);
+}
+
+void fimc_hw_set_input_addr(struct fimc_dev *dev, struct fimc_addr *paddr)
+{
+	u32 cfg = 0;
+
+	cfg = readl(dev->regs + S5P_CIREAL_ISIZE);
+	cfg |= S5P_CIREAL_ISIZE_ADDR_CH_DIS;
+	writel(cfg, dev->regs + S5P_CIREAL_ISIZE);
+
+	writel(paddr->y, dev->regs + S5P_CIIYSA0);
+	writel(paddr->cb, dev->regs + S5P_CIICBSA0);
+	writel(paddr->cr, dev->regs + S5P_CIICRSA0);
+
+	cfg &= ~S5P_CIREAL_ISIZE_ADDR_CH_DIS;
+	writel(cfg, dev->regs + S5P_CIREAL_ISIZE);
+}
+
+void fimc_hw_set_output_addr(struct fimc_dev *dev, struct fimc_addr *paddr)
+{
+	int i;
+	/* Set all the output register sets to point to single video buffer. */
+	for (i = 0; i < FIMC_MAX_OUT_BUFS; i++) {
+		writel(paddr->y, dev->regs + S5P_CIOYSA(i));
+		writel(paddr->cb, dev->regs + S5P_CIOCBSA(i));
+		writel(paddr->cr, dev->regs + S5P_CIOCRSA(i));
+	}
+}

drivers/media/video/s5p-fimc/regs-fimc.h

@@ -0,0 +1,293 @@
+/*
+ * Register definition file for Samsung Camera Interface (FIMC) driver
+ *
+ * Copyright (c) 2010 Samsung Electronics
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef REGS_FIMC_H_
+#define REGS_FIMC_H_
+
+#define S5P_CIOYSA(__x)			(0x18 + (__x) * 4)
+#define S5P_CIOCBSA(__x)		(0x28 + (__x) * 4)
+#define S5P_CIOCRSA(__x)		(0x38 + (__x) * 4)
+
+/* Input source format */
+#define S5P_CISRCFMT			0x00
+#define S5P_CISRCFMT_ITU601_8BIT	(1 << 31)
+#define S5P_CISRCFMT_ITU601_16BIT	(1 << 29)
+#define S5P_CISRCFMT_ORDER422_YCBYCR	(0 << 14)
+#define S5P_CISRCFMT_ORDER422_YCRYCB	(1 << 14)
+#define S5P_CISRCFMT_ORDER422_CBYCRY	(2 << 14)
+#define S5P_CISRCFMT_ORDER422_CRYCBY	(3 << 14)
+#define S5P_CISRCFMT_HSIZE(x)		((x) << 16)
+#define S5P_CISRCFMT_VSIZE(x)		((x) << 0)
+
+/* Window offset */
+#define S5P_CIWDOFST			0x04
+#define S5P_CIWDOFST_WINOFSEN		(1 << 31)
+#define S5P_CIWDOFST_CLROVFIY		(1 << 30)
+#define S5P_CIWDOFST_CLROVRLB		(1 << 29)
+#define S5P_CIWDOFST_WINHOROFST_MASK	(0x7ff << 16)
+#define S5P_CIWDOFST_CLROVFICB		(1 << 15)
+#define S5P_CIWDOFST_CLROVFICR		(1 << 14)
+#define S5P_CIWDOFST_WINHOROFST(x)	((x) << 16)
+#define S5P_CIWDOFST_WINVEROFST(x)	((x) << 0)
+#define S5P_CIWDOFST_WINVEROFST_MASK	(0xfff << 0)
+
+/* Global control */
+#define S5P_CIGCTRL			0x08
+#define S5P_CIGCTRL_SWRST		(1 << 31)
+#define S5P_CIGCTRL_CAMRST_A		(1 << 30)
+#define S5P_CIGCTRL_SELCAM_ITU_A	(1 << 29)
+#define S5P_CIGCTRL_SELCAM_ITU_MASK	(1 << 29)
+#define S5P_CIGCTRL_TESTPAT_NORMAL	(0 << 27)
+#define S5P_CIGCTRL_TESTPAT_COLOR_BAR	(1 << 27)
+#define S5P_CIGCTRL_TESTPAT_HOR_INC	(2 << 27)
+#define S5P_CIGCTRL_TESTPAT_VER_INC	(3 << 27)
+#define S5P_CIGCTRL_TESTPAT_MASK	(3 << 27)
+#define S5P_CIGCTRL_TESTPAT_SHIFT	(27)
+#define S5P_CIGCTRL_INVPOLPCLK		(1 << 26)
+#define S5P_CIGCTRL_INVPOLVSYNC		(1 << 25)
+#define S5P_CIGCTRL_INVPOLHREF		(1 << 24)
+#define S5P_CIGCTRL_IRQ_OVFEN		(1 << 22)
+#define S5P_CIGCTRL_HREF_MASK		(1 << 21)
+#define S5P_CIGCTRL_IRQ_LEVEL		(1 << 20)
+#define S5P_CIGCTRL_IRQ_CLR		(1 << 19)
+#define S5P_CIGCTRL_IRQ_ENABLE		(1 << 16)
+#define S5P_CIGCTRL_SHDW_DISABLE	(1 << 12)
+#define S5P_CIGCTRL_SELCAM_MIPI_A	(1 << 7)
+#define S5P_CIGCTRL_CAMIF_SELWB		(1 << 6)
+#define S5P_CIGCTRL_INVPOLHSYNC		(1 << 4)
+#define S5P_CIGCTRL_SELCAM_MIPI		(1 << 3)
+#define S5P_CIGCTRL_INTERLACE		(1 << 0)
+
+/* Window offset 2 */
+#define S5P_CIWDOFST2			0x14
+#define S5P_CIWDOFST2_HOROFF_MASK	(0xfff << 16)
+#define S5P_CIWDOFST2_VEROFF_MASK	(0xfff << 0)
+#define S5P_CIWDOFST2_HOROFF(x)		((x) << 16)
+#define S5P_CIWDOFST2_VEROFF(x)		((x) << 0)
+
+/* Output DMA Y plane start address */
+#define S5P_CIOYSA1			0x18
+#define S5P_CIOYSA2			0x1c
+#define S5P_CIOYSA3			0x20
+#define S5P_CIOYSA4			0x24
+
+/* Output DMA Cb plane start address */
+#define S5P_CIOCBSA1			0x28
+#define S5P_CIOCBSA2			0x2c
+#define S5P_CIOCBSA3			0x30
+#define S5P_CIOCBSA4			0x34
+
+/* Output DMA Cr plane start address */
+#define S5P_CIOCRSA1			0x38
+#define S5P_CIOCRSA2			0x3c
+#define S5P_CIOCRSA3			0x40
+#define S5P_CIOCRSA4			0x44
+
+/* Target image format */
+#define S5P_CITRGFMT			0x48
+#define S5P_CITRGFMT_INROT90		(1 << 31)
+#define S5P_CITRGFMT_YCBCR420		(0 << 29)
+#define S5P_CITRGFMT_YCBCR422		(1 << 29)
+#define S5P_CITRGFMT_YCBCR422_1P	(2 << 29)
+#define S5P_CITRGFMT_RGB		(3 << 29)
+#define S5P_CITRGFMT_FMT_MASK		(3 << 29)
+#define S5P_CITRGFMT_HSIZE_MASK		(0xfff << 16)
+#define S5P_CITRGFMT_FLIP_SHIFT		(14)
+#define S5P_CITRGFMT_FLIP_NORMAL	(0 << 14)
+#define S5P_CITRGFMT_FLIP_X_MIRROR	(1 << 14)
+#define S5P_CITRGFMT_FLIP_Y_MIRROR	(2 << 14)
+#define S5P_CITRGFMT_FLIP_180		(3 << 14)
+#define S5P_CITRGFMT_FLIP_MASK		(3 << 14)
+#define S5P_CITRGFMT_OUTROT90		(1 << 13)
+#define S5P_CITRGFMT_VSIZE_MASK		(0xfff << 0)
+#define S5P_CITRGFMT_HSIZE(x)		((x) << 16)
+#define S5P_CITRGFMT_VSIZE(x)		((x) << 0)
+
+/* Output DMA control */
+#define S5P_CIOCTRL			0x4c
+#define S5P_CIOCTRL_ORDER422_MASK	(3 << 0)
+#define S5P_CIOCTRL_ORDER422_CRYCBY	(0 << 0)
+#define S5P_CIOCTRL_ORDER422_YCRYCB	(1 << 0)
+#define S5P_CIOCTRL_ORDER422_CBYCRY	(2 << 0)
+#define S5P_CIOCTRL_ORDER422_YCBYCR	(3 << 0)
+#define S5P_CIOCTRL_LASTIRQ_ENABLE	(1 << 2)
+#define S5P_CIOCTRL_YCBCR_3PLANE	(0 << 3)
+#define S5P_CIOCTRL_YCBCR_2PLANE	(1 << 3)
+#define S5P_CIOCTRL_YCBCR_PLANE_MASK	(1 << 3)
+#define S5P_CIOCTRL_ORDER2P_SHIFT	(24)
+#define S5P_CIOCTRL_ORDER2P_MASK	(3 << 24)
+#define S5P_CIOCTRL_ORDER422_2P_LSB_CRCB (0 << 24)
+
+/* Pre-scaler control 1 */
+#define S5P_CISCPRERATIO		0x50
+#define S5P_CISCPRERATIO_SHFACTOR(x)	((x) << 28)
+#define S5P_CISCPRERATIO_HOR(x)		((x) << 16)
+#define S5P_CISCPRERATIO_VER(x)		((x) << 0)
+
+#define S5P_CISCPREDST			0x54
+#define S5P_CISCPREDST_WIDTH(x)		((x) << 16)
+#define S5P_CISCPREDST_HEIGHT(x)	((x) << 0)
+
+/* Main scaler control */
+#define S5P_CISCCTRL			0x58
+#define S5P_CISCCTRL_SCALERBYPASS	(1 << 31)
+#define S5P_CISCCTRL_SCALEUP_H		(1 << 30)
+#define S5P_CISCCTRL_SCALEUP_V		(1 << 29)
+#define S5P_CISCCTRL_CSCR2Y_WIDE	(1 << 28)
+#define S5P_CISCCTRL_CSCY2R_WIDE	(1 << 27)
+#define S5P_CISCCTRL_LCDPATHEN_FIFO	(1 << 26)
+#define S5P_CISCCTRL_INTERLACE		(1 << 25)
+#define S5P_CISCCTRL_SCALERSTART	(1 << 15)
+#define S5P_CISCCTRL_INRGB_FMT_RGB565	(0 << 13)
+#define S5P_CISCCTRL_INRGB_FMT_RGB666	(1 << 13)
+#define S5P_CISCCTRL_INRGB_FMT_RGB888	(2 << 13)
+#define S5P_CISCCTRL_INRGB_FMT_MASK	(3 << 13)
+#define S5P_CISCCTRL_OUTRGB_FMT_RGB565	(0 << 11)
+#define S5P_CISCCTRL_OUTRGB_FMT_RGB666	(1 << 11)
+#define S5P_CISCCTRL_OUTRGB_FMT_RGB888	(2 << 11)
+#define S5P_CISCCTRL_OUTRGB_FMT_MASK	(3 << 11)
+#define S5P_CISCCTRL_RGB_EXT		(1 << 10)
+#define S5P_CISCCTRL_ONE2ONE		(1 << 9)
+#define S5P_CISCCTRL_SC_HORRATIO(x)	((x) << 16)
+#define S5P_CISCCTRL_SC_VERRATIO(x)	((x) << 0)
+
+/* Target area */
+#define S5P_CITAREA			0x5c
+#define S5P_CITAREA_MASK		0x0fffffff
+
+/* General status */
+#define S5P_CISTATUS			0x64
+#define S5P_CISTATUS_OVFIY		(1 << 31)
+#define S5P_CISTATUS_OVFICB		(1 << 30)
+#define S5P_CISTATUS_OVFICR		(1 << 29)
+#define S5P_CISTATUS_VSYNC		(1 << 28)
+#define S5P_CISTATUS_WINOFF_EN		(1 << 25)
+#define S5P_CISTATUS_IMGCPT_EN		(1 << 22)
+#define S5P_CISTATUS_IMGCPT_SCEN	(1 << 21)
+#define S5P_CISTATUS_VSYNC_A		(1 << 20)
+#define S5P_CISTATUS_VSYNC_B		(1 << 19)
+#define S5P_CISTATUS_OVRLB		(1 << 18)
+#define S5P_CISTATUS_FRAME_END		(1 << 17)
+#define S5P_CISTATUS_LASTCAPT_END	(1 << 16)
+#define S5P_CISTATUS_VVALID_A		(1 << 15)
+#define S5P_CISTATUS_VVALID_B		(1 << 14)
+
+/* Image capture control */
+#define S5P_CIIMGCPT			0xc0
+#define S5P_CIIMGCPT_IMGCPTEN		(1 << 31)
+#define S5P_CIIMGCPT_IMGCPTEN_SC	(1 << 30)
+#define S5P_CIIMGCPT_CPT_FREN_ENABLE	(1 << 25)
+#define S5P_CIIMGCPT_CPT_FRMOD_CNT	(1 << 18)
+
+/* Frame capture sequence */
+#define S5P_CICPTSEQ			0xc4
+
+/* Image effect */
+#define S5P_CIIMGEFF			0xd0
+#define S5P_CIIMGEFF_IE_DISABLE		(0 << 30)
+#define S5P_CIIMGEFF_IE_ENABLE		(1 << 30)
+#define S5P_CIIMGEFF_IE_SC_BEFORE	(0 << 29)
+#define S5P_CIIMGEFF_IE_SC_AFTER	(1 << 29)
+#define S5P_CIIMGEFF_FIN_BYPASS		(0 << 26)
+#define S5P_CIIMGEFF_FIN_ARBITRARY	(1 << 26)
+#define S5P_CIIMGEFF_FIN_NEGATIVE	(2 << 26)
+#define S5P_CIIMGEFF_FIN_ARTFREEZE	(3 << 26)
+#define S5P_CIIMGEFF_FIN_EMBOSSING	(4 << 26)
+#define S5P_CIIMGEFF_FIN_SILHOUETTE	(5 << 26)
+#define S5P_CIIMGEFF_FIN_MASK		(7 << 26)
+#define S5P_CIIMGEFF_PAT_CBCR_MASK	((0xff < 13) | (0xff < 0))
+#define S5P_CIIMGEFF_PAT_CB(x)		((x) << 13)
+#define S5P_CIIMGEFF_PAT_CR(x)		((x) << 0)
+
+/* Input DMA Y/Cb/Cr plane start address 0 */
+#define S5P_CIIYSA0			0xd4
+#define S5P_CIICBSA0			0xd8
+#define S5P_CIICRSA0			0xdc
+
+/* Real input DMA image size */
+#define S5P_CIREAL_ISIZE		0xf8
+#define S5P_CIREAL_ISIZE_AUTOLOAD_EN	(1 << 31)
+#define S5P_CIREAL_ISIZE_ADDR_CH_DIS	(1 << 30)
+#define S5P_CIREAL_ISIZE_HEIGHT(x)	((x) << 16)
+#define S5P_CIREAL_ISIZE_WIDTH(x)	((x) << 0)
+
+
+/* Input DMA control */
+#define S5P_MSCTRL			0xfc
+#define S5P_MSCTRL_IN_BURST_COUNT_MASK	(3 << 24)
+#define S5P_MSCTRL_2P_IN_ORDER_MASK	(3 << 16)
+#define S5P_MSCTRL_2P_IN_ORDER_SHIFT	16
+#define S5P_MSCTRL_C_INT_IN_3PLANE	(0 << 15)
+#define S5P_MSCTRL_C_INT_IN_2PLANE	(1 << 15)
+#define S5P_MSCTRL_C_INT_IN_MASK	(1 << 15)
+#define S5P_MSCTRL_FLIP_SHIFT		13
+#define S5P_MSCTRL_FLIP_MASK		(3 << 13)
+#define S5P_MSCTRL_FLIP_NORMAL		(0 << 13)
+#define S5P_MSCTRL_FLIP_X_MIRROR	(1 << 13)
+#define S5P_MSCTRL_FLIP_Y_MIRROR	(2 << 13)
+#define S5P_MSCTRL_FLIP_180		(3 << 13)
+#define S5P_MSCTRL_ORDER422_SHIFT	4
+#define S5P_MSCTRL_ORDER422_CRYCBY	(0 << 4)
+#define S5P_MSCTRL_ORDER422_YCRYCB	(1 << 4)
+#define S5P_MSCTRL_ORDER422_CBYCRY	(2 << 4)
+#define S5P_MSCTRL_ORDER422_YCBYCR	(3 << 4)
+#define S5P_MSCTRL_ORDER422_MASK	(3 << 4)
+#define S5P_MSCTRL_INPUT_EXTCAM		(0 << 3)
+#define S5P_MSCTRL_INPUT_MEMORY		(1 << 3)
+#define S5P_MSCTRL_INPUT_MASK		(1 << 3)
+#define S5P_MSCTRL_INFORMAT_YCBCR420	(0 << 1)
+#define S5P_MSCTRL_INFORMAT_YCBCR422	(1 << 1)
+#define S5P_MSCTRL_INFORMAT_YCBCR422_1P	(2 << 1)
+#define S5P_MSCTRL_INFORMAT_RGB		(3 << 1)
+#define S5P_MSCTRL_INFORMAT_MASK	(3 << 1)
+#define S5P_MSCTRL_ENVID		(1 << 0)
+#define S5P_MSCTRL_FRAME_COUNT(x)	((x) << 24)
+
+/* Input DMA Y/Cb/Cr plane start address 1 */
+#define S5P_CIIYSA1			0x144
+#define S5P_CIICBSA1			0x148
+#define S5P_CIICRSA1			0x14c
+
+/* Output DMA Y/Cb/Cr offset */
+#define S5P_CIOYOFF			0x168
+#define S5P_CIOCBOFF			0x16c
+#define S5P_CIOCROFF			0x170
+
+/* Input DMA Y/Cb/Cr offset */
+#define S5P_CIIYOFF			0x174
+#define S5P_CIICBOFF			0x178
+#define S5P_CIICROFF			0x17c
+
+#define S5P_CIO_OFFS_VER(x)		((x) << 16)
+#define S5P_CIO_OFFS_HOR(x)		((x) << 0)
+
+/* Input DMA original image size */
+#define S5P_ORGISIZE			0x180
+
+/* Output DMA original image size */
+#define S5P_ORGOSIZE			0x184
+
+#define S5P_ORIG_SIZE_VER(x)		((x) << 16)
+#define S5P_ORIG_SIZE_HOR(x)		((x) << 0)
+
+/* Real output DMA image size (extension register) */
+#define S5P_CIEXTEN			0x188
+
+#define S5P_CIDMAPARAM			0x18c
+#define S5P_CIDMAPARAM_R_LINEAR		(0 << 29)
+#define S5P_CIDMAPARAM_R_64X32		(3 << 29)
+#define S5P_CIDMAPARAM_W_LINEAR		(0 << 13)
+#define S5P_CIDMAPARAM_W_64X32		(3 << 13)
+#define S5P_CIDMAPARAM_TILE_MASK	((3 << 29) | (3 << 13))
+
+/* MIPI CSI image format */
+#define S5P_CSIIMGFMT			0x194
+
+#endif /* REGS_FIMC_H_ */

drivers/media/video/saa7115.c

@@ -45,6 +45,7 @@
 #include <linux/i2c.h>
 #include <linux/videodev2.h>
 #include <media/v4l2-device.h>
+#include <media/v4l2-ctrls.h>
 #include <media/v4l2-chip-ident.h>
 #include <media/v4l2-i2c-drv.h>
 #include <media/saa7115.h>
@@ -65,16 +66,19 @@ MODULE_PARM_DESC(debug, "Debug level (0-1)");
 
 struct saa711x_state {
 	struct v4l2_subdev sd;
+	struct v4l2_ctrl_handler hdl;
+
+	struct {
+		/* chroma gain control cluster */
+		struct v4l2_ctrl *agc;
+		struct v4l2_ctrl *gain;
+	};
+
 	v4l2_std_id std;
 	int input;
 	int output;
 	int enable;
 	int radio;
-	int bright;
-	int contrast;
-	int hue;
-	int sat;
-	int chroma_agc;
 	int width;
 	int height;
 	u32 ident;
@@ -90,6 +94,11 @@ static inline struct saa711x_state *to_state(struct v4l2_subdev *sd)
 	return container_of(sd, struct saa711x_state, sd);
 }
 
+static inline struct v4l2_subdev *to_sd(struct v4l2_ctrl *ctrl)
+{
+	return &container_of(ctrl->handler, struct saa711x_state, hdl)->sd;
+}
+
 /* ----------------------------------------------------------------------- */
 
 static inline int saa711x_write(struct v4l2_subdev *sd, u8 reg, u8 value)
@@ -741,96 +750,53 @@ static int saa711x_s_clock_freq(struct v4l2_subdev *sd, u32 freq)
 	return 0;
 }
 
-static int saa711x_s_ctrl(struct v4l2_subdev *sd, struct v4l2_control *ctrl)
+static int saa711x_g_volatile_ctrl(struct v4l2_ctrl *ctrl)
 {
+	struct v4l2_subdev *sd = to_sd(ctrl);
 	struct saa711x_state *state = to_state(sd);
-	u8 val;
 
 	switch (ctrl->id) {
-	case V4L2_CID_BRIGHTNESS:
-		if (ctrl->value < 0 || ctrl->value > 255) {
-			v4l2_err(sd, "invalid brightness setting %d\n", ctrl->value);
-			return -ERANGE;
-		}
-
-		state->bright = ctrl->value;
-		saa711x_write(sd, R_0A_LUMA_BRIGHT_CNTL, state->bright);
-		break;
-
-	case V4L2_CID_CONTRAST:
-		if (ctrl->value < 0 || ctrl->value > 127) {
-			v4l2_err(sd, "invalid contrast setting %d\n", ctrl->value);
-			return -ERANGE;
-		}
-
-		state->contrast = ctrl->value;
-		saa711x_write(sd, R_0B_LUMA_CONTRAST_CNTL, state->contrast);
-		break;
-
-	case V4L2_CID_SATURATION:
-		if (ctrl->value < 0 || ctrl->value > 127) {
-			v4l2_err(sd, "invalid saturation setting %d\n", ctrl->value);
-			return -ERANGE;
-		}
-
-		state->sat = ctrl->value;
-		saa711x_write(sd, R_0C_CHROMA_SAT_CNTL, state->sat);
-		break;
-
-	case V4L2_CID_HUE:
-		if (ctrl->value < -128 || ctrl->value > 127) {
-			v4l2_err(sd, "invalid hue setting %d\n", ctrl->value);
-			return -ERANGE;
-		}
-
-		state->hue = ctrl->value;
-		saa711x_write(sd, R_0D_CHROMA_HUE_CNTL, state->hue);
-		break;
 	case V4L2_CID_CHROMA_AGC:
-		val = saa711x_read(sd, R_0F_CHROMA_GAIN_CNTL);
-		state->chroma_agc = ctrl->value;
-		if (ctrl->value)
-			val &= 0x7f;
-		else
-			val |= 0x80;
-		saa711x_write(sd, R_0F_CHROMA_GAIN_CNTL, val);
+		/* chroma gain cluster */
+		if (state->agc->cur.val)
+			state->gain->cur.val =
+				saa711x_read(sd, R_0F_CHROMA_GAIN_CNTL) & 0x7f;
 		break;
-	case V4L2_CID_CHROMA_GAIN:
-		/* Chroma gain cannot be set when AGC is enabled */
-		if (state->chroma_agc == 1)
-			return -EINVAL;
-		saa711x_write(sd, R_0F_CHROMA_GAIN_CNTL, ctrl->value | 0x80);
-		break;
-	default:
-		return -EINVAL;
 	}
-
 	return 0;
 }
 
-static int saa711x_g_ctrl(struct v4l2_subdev *sd, struct v4l2_control *ctrl)
+static int saa711x_s_ctrl(struct v4l2_ctrl *ctrl)
 {
+	struct v4l2_subdev *sd = to_sd(ctrl);
 	struct saa711x_state *state = to_state(sd);
 
 	switch (ctrl->id) {
 	case V4L2_CID_BRIGHTNESS:
-		ctrl->value = state->bright;
+		saa711x_write(sd, R_0A_LUMA_BRIGHT_CNTL, ctrl->val);
 		break;
+
 	case V4L2_CID_CONTRAST:
-		ctrl->value = state->contrast;
+		saa711x_write(sd, R_0B_LUMA_CONTRAST_CNTL, ctrl->val);
 		break;
+
 	case V4L2_CID_SATURATION:
-		ctrl->value = state->sat;
+		saa711x_write(sd, R_0C_CHROMA_SAT_CNTL, ctrl->val);
 		break;
+
 	case V4L2_CID_HUE:
-		ctrl->value = state->hue;
+		saa711x_write(sd, R_0D_CHROMA_HUE_CNTL, ctrl->val);
 		break;
+
 	case V4L2_CID_CHROMA_AGC:
-		ctrl->value = state->chroma_agc;
-		break;
-	case V4L2_CID_CHROMA_GAIN:
-		ctrl->value = saa711x_read(sd, R_0F_CHROMA_GAIN_CNTL) & 0x7f;
+		/* chroma gain cluster */
+		if (state->agc->val)
+			saa711x_write(sd, R_0F_CHROMA_GAIN_CNTL, state->gain->val);
+		else
+			saa711x_write(sd, R_0F_CHROMA_GAIN_CNTL, state->gain->val | 0x80);
+		v4l2_ctrl_activate(state->gain, !state->agc->val);
 		break;
+
 	default:
 		return -EINVAL;
 	}
@@ -1223,25 +1189,6 @@ static int saa711x_g_tuner(struct v4l2_subdev *sd, struct v4l2_tuner *vt)
 	return 0;
 }
 
-static int saa711x_queryctrl(struct v4l2_subdev *sd, struct v4l2_queryctrl *qc)
-{
-	switch (qc->id) {
-	case V4L2_CID_BRIGHTNESS:
-		return v4l2_ctrl_query_fill(qc, 0, 255, 1, 128);
-	case V4L2_CID_CONTRAST:
-	case V4L2_CID_SATURATION:
-		return v4l2_ctrl_query_fill(qc, 0, 127, 1, 64);
-	case V4L2_CID_HUE:
-		return v4l2_ctrl_query_fill(qc, -128, 127, 1, 0);
-	case V4L2_CID_CHROMA_AGC:
-		return v4l2_ctrl_query_fill(qc, 0, 1, 1, 1);
-	case V4L2_CID_CHROMA_GAIN:
-		return v4l2_ctrl_query_fill(qc, 0, 127, 1, 48);
-	default:
-		return -EINVAL;
-	}
-}
-
 static int saa711x_s_std(struct v4l2_subdev *sd, v4l2_std_id std)
 {
 	struct saa711x_state *state = to_state(sd);
@@ -1518,17 +1465,27 @@ static int saa711x_log_status(struct v4l2_subdev *sd)
 		break;
 	}
 	v4l2_info(sd, "Width, Height:   %d, %d\n", state->width, state->height);
+	v4l2_ctrl_handler_log_status(&state->hdl, sd->name);
 	return 0;
 }
 
 /* ----------------------------------------------------------------------- */
 
+static const struct v4l2_ctrl_ops saa711x_ctrl_ops = {
+	.s_ctrl = saa711x_s_ctrl,
+	.g_volatile_ctrl = saa711x_g_volatile_ctrl,
+};
+
 static const struct v4l2_subdev_core_ops saa711x_core_ops = {
 	.log_status = saa711x_log_status,
 	.g_chip_ident = saa711x_g_chip_ident,
-	.g_ctrl = saa711x_g_ctrl,
-	.s_ctrl = saa711x_s_ctrl,
-	.queryctrl = saa711x_queryctrl,
+	.g_ext_ctrls = v4l2_subdev_g_ext_ctrls,
+	.try_ext_ctrls = v4l2_subdev_try_ext_ctrls,
+	.s_ext_ctrls = v4l2_subdev_s_ext_ctrls,
+	.g_ctrl = v4l2_subdev_g_ctrl,
+	.s_ctrl = v4l2_subdev_s_ctrl,
+	.queryctrl = v4l2_subdev_queryctrl,
+	.querymenu = v4l2_subdev_querymenu,
 	.s_std = saa711x_s_std,
 	.reset = saa711x_reset,
 	.s_gpio = saa711x_s_gpio,
@@ -1579,8 +1536,9 @@ static int saa711x_probe(struct i2c_client *client,
 {
 	struct saa711x_state *state;
 	struct v4l2_subdev *sd;
-	int	i;
-	char	name[17];
+	struct v4l2_ctrl_handler *hdl;
+	int i;
+	char name[17];
 	char chip_id;
 	int autodetect = !id || id->driver_data == 1;
 
@@ -1619,15 +1577,38 @@ static int saa711x_probe(struct i2c_client *client,
 		return -ENOMEM;
 	sd = &state->sd;
 	v4l2_i2c_subdev_init(sd, client, &saa711x_ops);
+
+	hdl = &state->hdl;
+	v4l2_ctrl_handler_init(hdl, 6);
+	/* add in ascending ID order */
+	v4l2_ctrl_new_std(hdl, &saa711x_ctrl_ops,
+			V4L2_CID_BRIGHTNESS, 0, 255, 1, 128);
+	v4l2_ctrl_new_std(hdl, &saa711x_ctrl_ops,
+			V4L2_CID_CONTRAST, 0, 127, 1, 64);
+	v4l2_ctrl_new_std(hdl, &saa711x_ctrl_ops,
+			V4L2_CID_SATURATION, 0, 127, 1, 64);
+	v4l2_ctrl_new_std(hdl, &saa711x_ctrl_ops,
+			V4L2_CID_HUE, -128, 127, 1, 0);
+	state->agc = v4l2_ctrl_new_std(hdl, &saa711x_ctrl_ops,
+			V4L2_CID_CHROMA_AGC, 0, 1, 1, 1);
+	state->gain = v4l2_ctrl_new_std(hdl, &saa711x_ctrl_ops,
+			V4L2_CID_CHROMA_GAIN, 0, 127, 1, 40);
+	state->gain->is_volatile = 1;
+	sd->ctrl_handler = hdl;
+	if (hdl->error) {
+		int err = hdl->error;
+
+		v4l2_ctrl_handler_free(hdl);
+		kfree(state);
+		return err;
+	}
+	state->agc->flags |= V4L2_CTRL_FLAG_UPDATE;
+	v4l2_ctrl_cluster(2, &state->agc);
+
 	state->input = -1;
 	state->output = SAA7115_IPORT_ON;
 	state->enable = 1;
 	state->radio = 0;
-	state->bright = 128;
-	state->contrast = 64;
-	state->hue = 0;
-	state->sat = 64;
-	state->chroma_agc = 1;
 	switch (chip_id) {
 	case '1':
 		state->ident = V4L2_IDENT_SAA7111;
@@ -1675,6 +1656,7 @@ static int saa711x_probe(struct i2c_client *client,
 	if (state->ident > V4L2_IDENT_SAA7111A)
 		saa711x_writeregs(sd, saa7115_init_misc);
 	saa711x_set_v4lstd(sd, V4L2_STD_NTSC);
+	v4l2_ctrl_handler_setup(hdl);
 
 	v4l2_dbg(1, debug, sd, "status: (1E) 0x%02x, (1F) 0x%02x\n",
 		saa711x_read(sd, R_1E_STATUS_BYTE_1_VD_DEC),
@@ -1689,6 +1671,7 @@ static int saa711x_remove(struct i2c_client *client)
 	struct v4l2_subdev *sd = i2c_get_clientdata(client);
 
 	v4l2_device_unregister_subdev(sd);
+	v4l2_ctrl_handler_free(sd->ctrl_handler);
 	kfree(to_state(sd));
 	return 0;
 }

drivers/media/video/saa717x.c

@@ -38,6 +38,7 @@
 #include <linux/videodev2.h>
 #include <linux/i2c.h>
 #include <media/v4l2-device.h>
+#include <media/v4l2-ctrls.h>
 #include <media/v4l2-i2c-drv.h>
 
 MODULE_DESCRIPTION("Philips SAA717x audio/video decoder driver");
@@ -55,14 +56,11 @@ MODULE_PARM_DESC(debug, "Debug level (0-1)");
 
 struct saa717x_state {
 	struct v4l2_subdev sd;
+	struct v4l2_ctrl_handler hdl;
 	v4l2_std_id std;
 	int input;
 	int enable;
 	int radio;
-	int bright;
-	int contrast;
-	int hue;
-	int sat;
 	int playback;
 	int audio;
 	int tuner_audio_mode;
@@ -81,6 +79,11 @@ static inline struct saa717x_state *to_state(struct v4l2_subdev *sd)
 	return container_of(sd, struct saa717x_state, sd);
 }
 
+static inline struct v4l2_subdev *to_sd(struct v4l2_ctrl *ctrl)
+{
+	return &container_of(ctrl->handler, struct saa717x_state, hdl)->sd;
+}
+
 /* ----------------------------------------------------------------------- */
 
 /* for audio mode */
@@ -774,29 +777,6 @@ static void set_audio_mode(struct v4l2_subdev *sd, int audio_mode)
 	saa717x_write(sd, 0x470, reg_set_audio_template[audio_mode][1]);
 }
 
-/* write regs to video output level (bright,contrast,hue,sat) */
-static void set_video_output_level_regs(struct v4l2_subdev *sd,
-		struct saa717x_state *decoder)
-{
-	/* brightness ffh (bright) - 80h (ITU level) - 00h (dark) */
-	saa717x_write(sd, 0x10a, decoder->bright);
-
-	/* contrast 7fh (max: 1.984) - 44h (ITU) - 40h (1.0) -
-	   0h (luminance off) 40: i2c dump
-	   c0h (-1.0 inverse chrominance)
-	   80h (-2.0 inverse chrominance) */
-	saa717x_write(sd, 0x10b, decoder->contrast);
-
-	/* saturation? 7fh(max)-40h(ITU)-0h(color off)
-	   c0h (-1.0 inverse chrominance)
-	   80h (-2.0 inverse chrominance) */
-	saa717x_write(sd, 0x10c, decoder->sat);
-
-	/* color hue (phase) control
-	   7fh (+178.6) - 0h (0 normal) - 80h (-180.0) */
-	saa717x_write(sd, 0x10d, decoder->hue);
-}
-
 /* write regs to set audio volume, bass and treble */
 static int set_audio_regs(struct v4l2_subdev *sd,
 		struct saa717x_state *decoder)
@@ -829,9 +809,9 @@ static int set_audio_regs(struct v4l2_subdev *sd,
 
 	saa717x_write(sd, 0x480, val);
 
-	/* bass and treble; go to another function */
 	/* set bass and treble */
-	val = decoder->audio_main_bass | (decoder->audio_main_treble << 8);
+	val = decoder->audio_main_bass & 0x1f;
+	val |= (decoder->audio_main_treble & 0x1f) << 5;
 	saa717x_write(sd, 0x488, val);
 	return 0;
 }
@@ -893,218 +873,55 @@ static void set_v_scale(struct v4l2_subdev *sd, int task, int yscale)
 	saa717x_write(sd, 0x71 + task_shift, yscale >> 8);
 }
 
-static int saa717x_s_ctrl(struct v4l2_subdev *sd, struct v4l2_control *ctrl)
-{
-	struct saa717x_state *state = to_state(sd);
-
-	switch (ctrl->id) {
-	case V4L2_CID_BRIGHTNESS:
-		if (ctrl->value < 0 || ctrl->value > 255) {
-			v4l2_err(sd, "invalid brightness setting %d\n", ctrl->value);
-			return -ERANGE;
-		}
-
-		state->bright = ctrl->value;
-		v4l2_dbg(1, debug, sd, "bright:%d\n", state->bright);
-		saa717x_write(sd, 0x10a, state->bright);
-		break;
-
-	case V4L2_CID_CONTRAST:
-		if (ctrl->value < 0 || ctrl->value > 127) {
-			v4l2_err(sd, "invalid contrast setting %d\n", ctrl->value);
-			return -ERANGE;
-		}
-
-		state->contrast = ctrl->value;
-		v4l2_dbg(1, debug, sd, "contrast:%d\n", state->contrast);
-		saa717x_write(sd, 0x10b, state->contrast);
-		break;
-
-	case V4L2_CID_SATURATION:
-		if (ctrl->value < 0 || ctrl->value > 127) {
-			v4l2_err(sd, "invalid saturation setting %d\n", ctrl->value);
-			return -ERANGE;
-		}
-
-		state->sat = ctrl->value;
-		v4l2_dbg(1, debug, sd, "sat:%d\n", state->sat);
-		saa717x_write(sd, 0x10c, state->sat);
-		break;
-
-	case V4L2_CID_HUE:
-		if (ctrl->value < -128 || ctrl->value > 127) {
-			v4l2_err(sd, "invalid hue setting %d\n", ctrl->value);
-			return -ERANGE;
-		}
-
-		state->hue = ctrl->value;
-		v4l2_dbg(1, debug, sd, "hue:%d\n", state->hue);
-		saa717x_write(sd, 0x10d, state->hue);
-		break;
-
-	case V4L2_CID_AUDIO_MUTE:
-		state->audio_main_mute = ctrl->value;
-		set_audio_regs(sd, state);
-		break;
-
-	case V4L2_CID_AUDIO_VOLUME:
-		state->audio_main_volume = ctrl->value;
-		set_audio_regs(sd, state);
-		break;
-
-	case V4L2_CID_AUDIO_BALANCE:
-		state->audio_main_balance = ctrl->value;
-		set_audio_regs(sd, state);
-		break;
-
-	case V4L2_CID_AUDIO_TREBLE:
-		state->audio_main_treble = ctrl->value;
-		set_audio_regs(sd, state);
-		break;
-
-	case V4L2_CID_AUDIO_BASS:
-		state->audio_main_bass = ctrl->value;
-		set_audio_regs(sd, state);
-		break;
-
-	default:
-		return -EINVAL;
-	}
-
-	return 0;
-}
-
-static int saa717x_g_ctrl(struct v4l2_subdev *sd, struct v4l2_control *ctrl)
+static int saa717x_s_ctrl(struct v4l2_ctrl *ctrl)
 {
+	struct v4l2_subdev *sd = to_sd(ctrl);
 	struct saa717x_state *state = to_state(sd);
 
 	switch (ctrl->id) {
 	case V4L2_CID_BRIGHTNESS:
-		ctrl->value = state->bright;
-		break;
+		saa717x_write(sd, 0x10a, ctrl->val);
+		return 0;
 
 	case V4L2_CID_CONTRAST:
-		ctrl->value = state->contrast;
-		break;
+		saa717x_write(sd, 0x10b, ctrl->val);
+		return 0;
 
 	case V4L2_CID_SATURATION:
-		ctrl->value = state->sat;
-		break;
+		saa717x_write(sd, 0x10c, ctrl->val);
+		return 0;
 
 	case V4L2_CID_HUE:
-		ctrl->value = state->hue;
-		break;
+		saa717x_write(sd, 0x10d, ctrl->val);
+		return 0;
 
 	case V4L2_CID_AUDIO_MUTE:
-		ctrl->value = state->audio_main_mute;
+		state->audio_main_mute = ctrl->val;
 		break;
 
 	case V4L2_CID_AUDIO_VOLUME:
-		ctrl->value = state->audio_main_volume;
+		state->audio_main_volume = ctrl->val;
 		break;
 
 	case V4L2_CID_AUDIO_BALANCE:
-		ctrl->value = state->audio_main_balance;
+		state->audio_main_balance = ctrl->val;
 		break;
 
 	case V4L2_CID_AUDIO_TREBLE:
-		ctrl->value = state->audio_main_treble;
+		state->audio_main_treble = ctrl->val;
 		break;
 
 	case V4L2_CID_AUDIO_BASS:
-		ctrl->value = state->audio_main_bass;
+		state->audio_main_bass = ctrl->val;
 		break;
 
 	default:
-		return -EINVAL;
+		return 0;
 	}
-
+	set_audio_regs(sd, state);
 	return 0;
 }
 
-static struct v4l2_queryctrl saa717x_qctrl[] = {
-	{
-		.id            = V4L2_CID_BRIGHTNESS,
-		.type          = V4L2_CTRL_TYPE_INTEGER,
-		.name          = "Brightness",
-		.minimum       = 0,
-		.maximum       = 255,
-		.step          = 1,
-		.default_value = 128,
-		.flags         = 0,
-	}, {
-		.id            = V4L2_CID_CONTRAST,
-		.type          = V4L2_CTRL_TYPE_INTEGER,
-		.name          = "Contrast",
-		.minimum       = 0,
-		.maximum       = 255,
-		.step          = 1,
-		.default_value = 64,
-		.flags         = 0,
-	}, {
-		.id            = V4L2_CID_SATURATION,
-		.type          = V4L2_CTRL_TYPE_INTEGER,
-		.name          = "Saturation",
-		.minimum       = 0,
-		.maximum       = 255,
-		.step          = 1,
-		.default_value = 64,
-		.flags         = 0,
-	}, {
-		.id            = V4L2_CID_HUE,
-		.type          = V4L2_CTRL_TYPE_INTEGER,
-		.name          = "Hue",
-		.minimum       = -128,
-		.maximum       = 127,
-		.step          = 1,
-		.default_value = 0,
-		.flags 	       = 0,
-	}, {
-		.id            = V4L2_CID_AUDIO_VOLUME,
-		.type          = V4L2_CTRL_TYPE_INTEGER,
-		.name          = "Volume",
-		.minimum       = 0,
-		.maximum       = 65535,
-		.step          = 65535 / 100,
-		.default_value = 58880,
-		.flags         = 0,
-	}, {
-		.id            = V4L2_CID_AUDIO_BALANCE,
-		.type          = V4L2_CTRL_TYPE_INTEGER,
-		.name          = "Balance",
-		.minimum       = 0,
-		.maximum       = 65535,
-		.step          = 65535 / 100,
-		.default_value = 32768,
-		.flags         = 0,
-	}, {
-		.id            = V4L2_CID_AUDIO_MUTE,
-		.type          = V4L2_CTRL_TYPE_BOOLEAN,
-		.name          = "Mute",
-		.minimum       = 0,
-		.maximum       = 1,
-		.step          = 1,
-		.default_value = 1,
-		.flags         = 0,
-	}, {
-		.id            = V4L2_CID_AUDIO_BASS,
-		.type          = V4L2_CTRL_TYPE_INTEGER,
-		.name          = "Bass",
-		.minimum       = 0,
-		.maximum       = 65535,
-		.step          = 65535 / 100,
-		.default_value = 32768,
-	}, {
-		.id            = V4L2_CID_AUDIO_TREBLE,
-		.type          = V4L2_CTRL_TYPE_INTEGER,
-		.name          = "Treble",
-		.minimum       = 0,
-		.maximum       = 65535,
-		.step          = 65535 / 100,
-		.default_value = 32768,
-	},
-};
-
 static int saa717x_s_video_routing(struct v4l2_subdev *sd,
 				   u32 input, u32 output, u32 config)
 {
@@ -1158,18 +975,6 @@ static int saa717x_s_video_routing(struct v4l2_subdev *sd,
 	return 0;
 }
 
-static int saa717x_queryctrl(struct v4l2_subdev *sd, struct v4l2_queryctrl *qc)
-{
-	int i;
-
-	for (i = 0; i < ARRAY_SIZE(saa717x_qctrl); i++)
-		if (qc->id && qc->id == saa717x_qctrl[i].id) {
-			memcpy(qc, &saa717x_qctrl[i], sizeof(*qc));
-			return 0;
-		}
-	return -EINVAL;
-}
-
 #ifdef CONFIG_VIDEO_ADV_DEBUG
 static int saa717x_g_register(struct v4l2_subdev *sd, struct v4l2_dbg_register *reg)
 {
@@ -1386,17 +1191,34 @@ static int saa717x_g_tuner(struct v4l2_subdev *sd, struct v4l2_tuner *vt)
 	return 0;
 }
 
+static int saa717x_log_status(struct v4l2_subdev *sd)
+{
+	struct saa717x_state *state = to_state(sd);
+
+	v4l2_ctrl_handler_log_status(&state->hdl, sd->name);
+	return 0;
+}
+
 /* ----------------------------------------------------------------------- */
 
+static const struct v4l2_ctrl_ops saa717x_ctrl_ops = {
+	.s_ctrl = saa717x_s_ctrl,
+};
+
 static const struct v4l2_subdev_core_ops saa717x_core_ops = {
 #ifdef CONFIG_VIDEO_ADV_DEBUG
 	.g_register = saa717x_g_register,
 	.s_register = saa717x_s_register,
 #endif
-	.queryctrl = saa717x_queryctrl,
-	.g_ctrl = saa717x_g_ctrl,
-	.s_ctrl = saa717x_s_ctrl,
 	.s_std = saa717x_s_std,
+	.g_ext_ctrls = v4l2_subdev_g_ext_ctrls,
+	.try_ext_ctrls = v4l2_subdev_try_ext_ctrls,
+	.s_ext_ctrls = v4l2_subdev_s_ext_ctrls,
+	.g_ctrl = v4l2_subdev_g_ctrl,
+	.s_ctrl = v4l2_subdev_s_ctrl,
+	.queryctrl = v4l2_subdev_queryctrl,
+	.querymenu = v4l2_subdev_querymenu,
+	.log_status = saa717x_log_status,
 };
 
 static const struct v4l2_subdev_tuner_ops saa717x_tuner_ops = {
@@ -1432,6 +1254,7 @@ static int saa717x_probe(struct i2c_client *client,
 			 const struct i2c_device_id *did)
 {
 	struct saa717x_state *decoder;
+	struct v4l2_ctrl_handler *hdl;
 	struct v4l2_subdev *sd;
 	u8 id = 0;
 	char *p = "";
@@ -1467,16 +1290,41 @@ static int saa717x_probe(struct i2c_client *client,
 		p = "saa7171";
 	v4l2_info(sd, "%s found @ 0x%x (%s)\n", p,
 			client->addr << 1, client->adapter->name);
+
+	hdl = &decoder->hdl;
+	v4l2_ctrl_handler_init(hdl, 9);
+	/* add in ascending ID order */
+	v4l2_ctrl_new_std(hdl, &saa717x_ctrl_ops,
+			V4L2_CID_BRIGHTNESS, 0, 255, 1, 128);
+	v4l2_ctrl_new_std(hdl, &saa717x_ctrl_ops,
+			V4L2_CID_CONTRAST, 0, 255, 1, 68);
+	v4l2_ctrl_new_std(hdl, &saa717x_ctrl_ops,
+			V4L2_CID_SATURATION, 0, 255, 1, 64);
+	v4l2_ctrl_new_std(hdl, &saa717x_ctrl_ops,
+			V4L2_CID_HUE, -128, 127, 1, 0);
+	v4l2_ctrl_new_std(hdl, &saa717x_ctrl_ops,
+			V4L2_CID_AUDIO_VOLUME, 0, 65535, 65535 / 100, 42000);
+	v4l2_ctrl_new_std(hdl, &saa717x_ctrl_ops,
+			V4L2_CID_AUDIO_BALANCE, 0, 65535, 65535 / 100, 32768);
+	v4l2_ctrl_new_std(hdl, &saa717x_ctrl_ops,
+			V4L2_CID_AUDIO_BASS, -16, 15, 1, 0);
+	v4l2_ctrl_new_std(hdl, &saa717x_ctrl_ops,
+			V4L2_CID_AUDIO_TREBLE, -16, 15, 1, 0);
+	v4l2_ctrl_new_std(hdl, &saa717x_ctrl_ops,
+			V4L2_CID_AUDIO_MUTE, 0, 1, 1, 0);
+	sd->ctrl_handler = hdl;
+	if (hdl->error) {
+		int err = hdl->error;
+
+		v4l2_ctrl_handler_free(hdl);
+		kfree(decoder);
+		return err;
+	}
+
 	decoder->std = V4L2_STD_NTSC;
 	decoder->input = -1;
 	decoder->enable = 1;
 
-	/* tune these parameters */
-	decoder->bright = 0x80;
-	decoder->contrast = 0x44;
-	decoder->sat = 0x40;
-	decoder->hue = 0x00;
-
 	/* FIXME!! */
 	decoder->playback = 0;	/* initially capture mode used */
 	decoder->audio = 1; /* DECODER_AUDIO_48_KHZ */
@@ -1487,23 +1335,13 @@ static int saa717x_probe(struct i2c_client *client,
 	/* set volume, bass and treble */
 	decoder->audio_main_vol_l = 6;
 	decoder->audio_main_vol_r = 6;
-	decoder->audio_main_bass = 0;
-	decoder->audio_main_treble = 0;
-	decoder->audio_main_mute = 0;
-	decoder->audio_main_balance = 32768;
-	/* normalize (24 to -40 (not -84) -> 65535 to 0) */
-	decoder->audio_main_volume =
-		(decoder->audio_main_vol_r + 41) * 65535 / (24 - (-40));
 
 	v4l2_dbg(1, debug, sd, "writing init values\n");
 
 	/* FIXME!! */
 	saa717x_write_regs(sd, reg_init_initialize);
-	set_video_output_level_regs(sd, decoder);
-	/* set bass,treble to 0db 20041101 K.Ohta */
-	decoder->audio_main_bass = 0;
-	decoder->audio_main_treble = 0;
-	set_audio_regs(sd, decoder);
+
+	v4l2_ctrl_handler_setup(hdl);
 
 	set_current_state(TASK_INTERRUPTIBLE);
 	schedule_timeout(2*HZ);
@@ -1515,6 +1353,7 @@ static int saa717x_remove(struct i2c_client *client)
 	struct v4l2_subdev *sd = i2c_get_clientdata(client);
 
 	v4l2_device_unregister_subdev(sd);
+	v4l2_ctrl_handler_free(sd->ctrl_handler);
 	kfree(to_state(sd));
 	return 0;
 }

drivers/media/video/soc_camera.c

@@ -779,9 +779,12 @@ static int soc_camera_s_crop(struct file *file, void *fh,
 	ret = ici->ops->get_crop(icd, &current_crop);
 
 	/* Prohibit window size change with initialised buffers */
-	if (icf->vb_vidq.bufs[0] && !ret &&
-	    (a->c.width != current_crop.c.width ||
-	     a->c.height != current_crop.c.height)) {
+	if (ret < 0) {
+		dev_err(&icd->dev,
+			"S_CROP denied: getting current crop failed\n");
+	} else if (icf->vb_vidq.bufs[0] &&
+		   (a->c.width != current_crop.c.width ||
+		    a->c.height != current_crop.c.height)) {
 		dev_err(&icd->dev,
 			"S_CROP denied: queue initialised and sizes differ\n");
 		ret = -EBUSY;

drivers/media/video/tvp7002.c

@@ -179,7 +179,7 @@ static const struct i2c_reg_value tvp7002_init_default[] = {
 /* Register parameters for 480P */
 static const struct i2c_reg_value tvp7002_parms_480P[] = {
 	{ TVP7002_HPLL_FDBK_DIV_MSBS, 0x35, TVP7002_WRITE },
-	{ TVP7002_HPLL_FDBK_DIV_LSBS, 0x0a, TVP7002_WRITE },
+	{ TVP7002_HPLL_FDBK_DIV_LSBS, 0xa0, TVP7002_WRITE },
 	{ TVP7002_HPLL_CRTL, 0x02, TVP7002_WRITE },
 	{ TVP7002_HPLL_PHASE_SEL, 0x14, TVP7002_WRITE },
 	{ TVP7002_AVID_START_PIXEL_LSBS, 0x91, TVP7002_WRITE },
@@ -223,7 +223,7 @@ static const struct i2c_reg_value tvp7002_parms_576P[] = {
 /* Register parameters for 1080I60 */
 static const struct i2c_reg_value tvp7002_parms_1080I60[] = {
 	{ TVP7002_HPLL_FDBK_DIV_MSBS, 0x89, TVP7002_WRITE },
-	{ TVP7002_HPLL_FDBK_DIV_LSBS, 0x08, TVP7002_WRITE },
+	{ TVP7002_HPLL_FDBK_DIV_LSBS, 0x80, TVP7002_WRITE },
 	{ TVP7002_HPLL_CRTL, 0x98, TVP7002_WRITE },
 	{ TVP7002_HPLL_PHASE_SEL, 0x14, TVP7002_WRITE },
 	{ TVP7002_AVID_START_PIXEL_LSBS, 0x06, TVP7002_WRITE },
@@ -245,7 +245,7 @@ static const struct i2c_reg_value tvp7002_parms_1080I60[] = {
 /* Register parameters for 1080P60 */
 static const struct i2c_reg_value tvp7002_parms_1080P60[] = {
 	{ TVP7002_HPLL_FDBK_DIV_MSBS, 0x89, TVP7002_WRITE },
-	{ TVP7002_HPLL_FDBK_DIV_LSBS, 0x08, TVP7002_WRITE },
+	{ TVP7002_HPLL_FDBK_DIV_LSBS, 0x80, TVP7002_WRITE },
 	{ TVP7002_HPLL_CRTL, 0xE0, TVP7002_WRITE },
 	{ TVP7002_HPLL_PHASE_SEL, 0x14, TVP7002_WRITE },
 	{ TVP7002_AVID_START_PIXEL_LSBS, 0x06, TVP7002_WRITE },
@@ -289,7 +289,7 @@ static const struct i2c_reg_value tvp7002_parms_1080I50[] = {
 /* Register parameters for 720P60 */
 static const struct i2c_reg_value tvp7002_parms_720P60[] = {
 	{ TVP7002_HPLL_FDBK_DIV_MSBS, 0x67, TVP7002_WRITE },
-	{ TVP7002_HPLL_FDBK_DIV_LSBS, 0x02, TVP7002_WRITE },
+	{ TVP7002_HPLL_FDBK_DIV_LSBS, 0x20, TVP7002_WRITE },
 	{ TVP7002_HPLL_CRTL, 0xa0, TVP7002_WRITE },
 	{ TVP7002_HPLL_PHASE_SEL, 0x16, TVP7002_WRITE },
 	{ TVP7002_AVID_START_PIXEL_LSBS, 0x47, TVP7002_WRITE },
@@ -311,7 +311,7 @@ static const struct i2c_reg_value tvp7002_parms_720P60[] = {
 /* Register parameters for 720P50 */
 static const struct i2c_reg_value tvp7002_parms_720P50[] = {
 	{ TVP7002_HPLL_FDBK_DIV_MSBS, 0x7b, TVP7002_WRITE },
-	{ TVP7002_HPLL_FDBK_DIV_LSBS, 0x0c, TVP7002_WRITE },
+	{ TVP7002_HPLL_FDBK_DIV_LSBS, 0xc0, TVP7002_WRITE },
 	{ TVP7002_HPLL_CRTL, 0x98, TVP7002_WRITE },
 	{ TVP7002_HPLL_PHASE_SEL, 0x16, TVP7002_WRITE },
 	{ TVP7002_AVID_START_PIXEL_LSBS, 0x47, TVP7002_WRITE },

drivers/media/video/usbvideo/usbvideo.c

@@ -282,19 +282,15 @@ static void usbvideo_OverlayChar(struct uvd *uvd, struct usbvideo_frame *frame,
 	};
 	unsigned short digit;
 	int ix, iy;
+	int value;
 
 	if ((uvd == NULL) || (frame == NULL))
 		return;
 
-	if (ch >= '0' && ch <= '9')
-		ch -= '0';
-	else if (ch >= 'A' && ch <= 'F')
-		ch = 10 + (ch - 'A');
-	else if (ch >= 'a' && ch <= 'f')
-		ch = 10 + (ch - 'a');
-	else
+	value = hex_to_bin(ch);
+	if (value < 0)
 		return;
-	digit = digits[ch];
+	digit = digits[value];
 
 	for (iy=0; iy < 5; iy++) {
 		for (ix=0; ix < 3; ix++) {

drivers/media/video/uvc/uvc_driver.c

@@ -2145,6 +2145,15 @@ static struct usb_device_id uvc_ids[] = {
 	  .bInterfaceSubClass	= 1,
 	  .bInterfaceProtocol	= 0,
 	  .driver_info		= UVC_QUIRK_STREAM_NO_FID },
+	/* Miricle 307K */
+	{ .match_flags		= USB_DEVICE_ID_MATCH_DEVICE
+				| USB_DEVICE_ID_MATCH_INT_INFO,
+	  .idVendor		= 0x17dc,
+	  .idProduct		= 0x0202,
+	  .bInterfaceClass	= USB_CLASS_VIDEO,
+	  .bInterfaceSubClass	= 1,
+	  .bInterfaceProtocol	= 0,
+	  .driver_info		= UVC_QUIRK_STREAM_NO_FID },
 	/* Lenovo Thinkpad SL400/SL500 */
 	{ .match_flags		= USB_DEVICE_ID_MATCH_DEVICE
 				| USB_DEVICE_ID_MATCH_INT_INFO,

drivers/media/video/uvc/uvc_queue.c

@@ -78,12 +78,14 @@
  *
  */
 
-void uvc_queue_init(struct uvc_video_queue *queue, enum v4l2_buf_type type)
+void uvc_queue_init(struct uvc_video_queue *queue, enum v4l2_buf_type type,
+		    int drop_corrupted)
 {
 	mutex_init(&queue->mutex);
 	spin_lock_init(&queue->irqlock);
 	INIT_LIST_HEAD(&queue->mainqueue);
 	INIT_LIST_HEAD(&queue->irqqueue);
+	queue->flags = drop_corrupted ? UVC_QUEUE_DROP_CORRUPTED : 0;
 	queue->type = type;
 }
 
@@ -435,8 +437,10 @@ int uvc_queue_enable(struct uvc_video_queue *queue, int enable)
 		uvc_queue_cancel(queue, 0);
 		INIT_LIST_HEAD(&queue->mainqueue);
 
-		for (i = 0; i < queue->count; ++i)
+		for (i = 0; i < queue->count; ++i) {
+			queue->buffer[i].error = 0;
 			queue->buffer[i].state = UVC_BUF_STATE_IDLE;
+		}
 
 		queue->flags &= ~UVC_QUEUE_STREAMING;
 	}
@@ -488,8 +492,8 @@ struct uvc_buffer *uvc_queue_next_buffer(struct uvc_video_queue *queue,
 	struct uvc_buffer *nextbuf;
 	unsigned long flags;
 
-	if ((queue->flags & UVC_QUEUE_DROP_INCOMPLETE) &&
-	    buf->buf.length != buf->buf.bytesused) {
+	if ((queue->flags & UVC_QUEUE_DROP_CORRUPTED) && buf->error) {
+		buf->error = 0;
 		buf->state = UVC_BUF_STATE_QUEUED;
 		buf->buf.bytesused = 0;
 		return buf;
@@ -497,6 +501,7 @@ struct uvc_buffer *uvc_queue_next_buffer(struct uvc_video_queue *queue,
 
 	spin_lock_irqsave(&queue->irqlock, flags);
 	list_del(&buf->queue);
+	buf->error = 0;
 	buf->state = UVC_BUF_STATE_DONE;
 	if (!list_empty(&queue->irqqueue))
 		nextbuf = list_first_entry(&queue->irqqueue, struct uvc_buffer,

drivers/media/video/uvc/uvc_video.c

@@ -555,6 +555,9 @@ static void uvc_video_decode_isoc(struct urb *urb, struct uvc_streaming *stream,
 		if (urb->iso_frame_desc[i].status < 0) {
 			uvc_trace(UVC_TRACE_FRAME, "USB isochronous frame "
 				"lost (%d).\n", urb->iso_frame_desc[i].status);
+			/* Mark the buffer as faulty. */
+			if (buf != NULL)
+				buf->error = 1;
 			continue;
 		}
 
@@ -579,8 +582,14 @@ static void uvc_video_decode_isoc(struct urb *urb, struct uvc_streaming *stream,
 		uvc_video_decode_end(stream, buf, mem,
 			urb->iso_frame_desc[i].actual_length);
 
-		if (buf->state == UVC_BUF_STATE_READY)
+		if (buf->state == UVC_BUF_STATE_READY) {
+			if (buf->buf.length != buf->buf.bytesused &&
+			    !(stream->cur_format->flags &
+			      UVC_FMT_FLAG_COMPRESSED))
+				buf->error = 1;
+
 			buf = uvc_queue_next_buffer(&stream->queue, buf);
+		}
 	}
 }
 
@@ -1104,7 +1113,7 @@ int uvc_video_init(struct uvc_streaming *stream)
 	atomic_set(&stream->active, 0);
 
 	/* Initialize the video buffers queue. */
-	uvc_queue_init(&stream->queue, stream->type);
+	uvc_queue_init(&stream->queue, stream->type, !uvc_no_drop_param);
 
 	/* Alternate setting 0 should be the default, yet the XBox Live Vision
 	 * Cam (and possibly other devices) crash or otherwise misbehave if
@@ -1197,12 +1206,6 @@ int uvc_video_enable(struct uvc_streaming *stream, int enable)
 		return 0;
 	}
 
-	if ((stream->cur_format->flags & UVC_FMT_FLAG_COMPRESSED) ||
-	    uvc_no_drop_param)
-		stream->queue.flags &= ~UVC_QUEUE_DROP_INCOMPLETE;
-	else
-		stream->queue.flags |= UVC_QUEUE_DROP_INCOMPLETE;
-
 	ret = uvc_queue_enable(&stream->queue, 1);
 	if (ret < 0)
 		return ret;

drivers/media/video/uvc/uvcvideo.h

@@ -379,11 +379,12 @@ struct uvc_buffer {
 	struct list_head queue;
 	wait_queue_head_t wait;
 	enum uvc_buffer_state state;
+	unsigned int error;
 };
 
 #define UVC_QUEUE_STREAMING		(1 << 0)
 #define UVC_QUEUE_DISCONNECTED		(1 << 1)
-#define UVC_QUEUE_DROP_INCOMPLETE	(1 << 2)
+#define UVC_QUEUE_DROP_CORRUPTED	(1 << 2)
 
 struct uvc_video_queue {
 	enum v4l2_buf_type type;
@@ -562,7 +563,7 @@ extern struct uvc_driver uvc_driver;
 
 /* Video buffers queue management. */
 extern void uvc_queue_init(struct uvc_video_queue *queue,
-		enum v4l2_buf_type type);
+		enum v4l2_buf_type type, int drop_corrupted);
 extern int uvc_alloc_buffers(struct uvc_video_queue *queue,
 		unsigned int nbuffers, unsigned int buflength);
 extern int uvc_free_buffers(struct uvc_video_queue *queue);

drivers/media/video/v4l2-common.c

@@ -62,6 +62,7 @@
 #define __OLD_VIDIOC_ /* To allow fixing old calls*/
 #include <media/v4l2-common.h>
 #include <media/v4l2-device.h>
+#include <media/v4l2-ctrls.h>
 #include <media/v4l2-chip-ident.h>
 
 #include <linux/videodev2.h>
@@ -172,487 +173,17 @@ int v4l2_ctrl_check(struct v4l2_ext_control *ctrl, struct v4l2_queryctrl *qctrl,
 }
 EXPORT_SYMBOL(v4l2_ctrl_check);
 
-/* Returns NULL or a character pointer array containing the menu for
-   the given control ID. The pointer array ends with a NULL pointer.
-   An empty string signifies a menu entry that is invalid. This allows
-   drivers to disable certain options if it is not supported. */
-const char **v4l2_ctrl_get_menu(u32 id)
-{
-	static const char *mpeg_audio_sampling_freq[] = {
-		"44.1 kHz",
-		"48 kHz",
-		"32 kHz",
-		NULL
-	};
-	static const char *mpeg_audio_encoding[] = {
-		"MPEG-1/2 Layer I",
-		"MPEG-1/2 Layer II",
-		"MPEG-1/2 Layer III",
-		"MPEG-2/4 AAC",
-		"AC-3",
-		NULL
-	};
-	static const char *mpeg_audio_l1_bitrate[] = {
-		"32 kbps",
-		"64 kbps",
-		"96 kbps",
-		"128 kbps",
-		"160 kbps",
-		"192 kbps",
-		"224 kbps",
-		"256 kbps",
-		"288 kbps",
-		"320 kbps",
-		"352 kbps",
-		"384 kbps",
-		"416 kbps",
-		"448 kbps",
-		NULL
-	};
-	static const char *mpeg_audio_l2_bitrate[] = {
-		"32 kbps",
-		"48 kbps",
-		"56 kbps",
-		"64 kbps",
-		"80 kbps",
-		"96 kbps",
-		"112 kbps",
-		"128 kbps",
-		"160 kbps",
-		"192 kbps",
-		"224 kbps",
-		"256 kbps",
-		"320 kbps",
-		"384 kbps",
-		NULL
-	};
-	static const char *mpeg_audio_l3_bitrate[] = {
-		"32 kbps",
-		"40 kbps",
-		"48 kbps",
-		"56 kbps",
-		"64 kbps",
-		"80 kbps",
-		"96 kbps",
-		"112 kbps",
-		"128 kbps",
-		"160 kbps",
-		"192 kbps",
-		"224 kbps",
-		"256 kbps",
-		"320 kbps",
-		NULL
-	};
-	static const char *mpeg_audio_ac3_bitrate[] = {
-		"32 kbps",
-		"40 kbps",
-		"48 kbps",
-		"56 kbps",
-		"64 kbps",
-		"80 kbps",
-		"96 kbps",
-		"112 kbps",
-		"128 kbps",
-		"160 kbps",
-		"192 kbps",
-		"224 kbps",
-		"256 kbps",
-		"320 kbps",
-		"384 kbps",
-		"448 kbps",
-		"512 kbps",
-		"576 kbps",
-		"640 kbps",
-		NULL
-	};
-	static const char *mpeg_audio_mode[] = {
-		"Stereo",
-		"Joint Stereo",
-		"Dual",
-		"Mono",
-		NULL
-	};
-	static const char *mpeg_audio_mode_extension[] = {
-		"Bound 4",
-		"Bound 8",
-		"Bound 12",
-		"Bound 16",
-		NULL
-	};
-	static const char *mpeg_audio_emphasis[] = {
-		"No Emphasis",
-		"50/15 us",
-		"CCITT J17",
-		NULL
-	};
-	static const char *mpeg_audio_crc[] = {
-		"No CRC",
-		"16-bit CRC",
-		NULL
-	};
-	static const char *mpeg_video_encoding[] = {
-		"MPEG-1",
-		"MPEG-2",
-		"MPEG-4 AVC",
-		NULL
-	};
-	static const char *mpeg_video_aspect[] = {
-		"1x1",
-		"4x3",
-		"16x9",
-		"2.21x1",
-		NULL
-	};
-	static const char *mpeg_video_bitrate_mode[] = {
-		"Variable Bitrate",
-		"Constant Bitrate",
-		NULL
-	};
-	static const char *mpeg_stream_type[] = {
-		"MPEG-2 Program Stream",
-		"MPEG-2 Transport Stream",
-		"MPEG-1 System Stream",
-		"MPEG-2 DVD-compatible Stream",
-		"MPEG-1 VCD-compatible Stream",
-		"MPEG-2 SVCD-compatible Stream",
-		NULL
-	};
-	static const char *mpeg_stream_vbi_fmt[] = {
-		"No VBI",
-		"Private packet, IVTV format",
-		NULL
-	};
-	static const char *camera_power_line_frequency[] = {
-		"Disabled",
-		"50 Hz",
-		"60 Hz",
-		NULL
-	};
-	static const char *camera_exposure_auto[] = {
-		"Auto Mode",
-		"Manual Mode",
-		"Shutter Priority Mode",
-		"Aperture Priority Mode",
-		NULL
-	};
-	static const char *colorfx[] = {
-		"None",
-		"Black & White",
-		"Sepia",
-		"Negative",
-		"Emboss",
-		"Sketch",
-		"Sky blue",
-		"Grass green",
-		"Skin whiten",
-		"Vivid",
-		NULL
-	};
-	static const char *tune_preemphasis[] = {
-		"No preemphasis",
-		"50 useconds",
-		"75 useconds",
-		NULL,
-	};
-
-	switch (id) {
-		case V4L2_CID_MPEG_AUDIO_SAMPLING_FREQ:
-			return mpeg_audio_sampling_freq;
-		case V4L2_CID_MPEG_AUDIO_ENCODING:
-			return mpeg_audio_encoding;
-		case V4L2_CID_MPEG_AUDIO_L1_BITRATE:
-			return mpeg_audio_l1_bitrate;
-		case V4L2_CID_MPEG_AUDIO_L2_BITRATE:
-			return mpeg_audio_l2_bitrate;
-		case V4L2_CID_MPEG_AUDIO_L3_BITRATE:
-			return mpeg_audio_l3_bitrate;
-		case V4L2_CID_MPEG_AUDIO_AC3_BITRATE:
-			return mpeg_audio_ac3_bitrate;
-		case V4L2_CID_MPEG_AUDIO_MODE:
-			return mpeg_audio_mode;
-		case V4L2_CID_MPEG_AUDIO_MODE_EXTENSION:
-			return mpeg_audio_mode_extension;
-		case V4L2_CID_MPEG_AUDIO_EMPHASIS:
-			return mpeg_audio_emphasis;
-		case V4L2_CID_MPEG_AUDIO_CRC:
-			return mpeg_audio_crc;
-		case V4L2_CID_MPEG_VIDEO_ENCODING:
-			return mpeg_video_encoding;
-		case V4L2_CID_MPEG_VIDEO_ASPECT:
-			return mpeg_video_aspect;
-		case V4L2_CID_MPEG_VIDEO_BITRATE_MODE:
-			return mpeg_video_bitrate_mode;
-		case V4L2_CID_MPEG_STREAM_TYPE:
-			return mpeg_stream_type;
-		case V4L2_CID_MPEG_STREAM_VBI_FMT:
-			return mpeg_stream_vbi_fmt;
-		case V4L2_CID_POWER_LINE_FREQUENCY:
-			return camera_power_line_frequency;
-		case V4L2_CID_EXPOSURE_AUTO:
-			return camera_exposure_auto;
-		case V4L2_CID_COLORFX:
-			return colorfx;
-		case V4L2_CID_TUNE_PREEMPHASIS:
-			return tune_preemphasis;
-		default:
-			return NULL;
-	}
-}
-EXPORT_SYMBOL(v4l2_ctrl_get_menu);
-
-/* Return the control name. */
-const char *v4l2_ctrl_get_name(u32 id)
-{
-	switch (id) {
-	/* USER controls */
-	case V4L2_CID_USER_CLASS: 		return "User Controls";
-	case V4L2_CID_BRIGHTNESS: 		return "Brightness";
-	case V4L2_CID_CONTRAST: 		return "Contrast";
-	case V4L2_CID_SATURATION: 		return "Saturation";
-	case V4L2_CID_HUE: 			return "Hue";
-	case V4L2_CID_AUDIO_VOLUME: 		return "Volume";
-	case V4L2_CID_AUDIO_BALANCE: 		return "Balance";
-	case V4L2_CID_AUDIO_BASS: 		return "Bass";
-	case V4L2_CID_AUDIO_TREBLE: 		return "Treble";
-	case V4L2_CID_AUDIO_MUTE: 		return "Mute";
-	case V4L2_CID_AUDIO_LOUDNESS: 		return "Loudness";
-	case V4L2_CID_BLACK_LEVEL:		return "Black Level";
-	case V4L2_CID_AUTO_WHITE_BALANCE:	return "White Balance, Automatic";
-	case V4L2_CID_DO_WHITE_BALANCE:		return "Do White Balance";
-	case V4L2_CID_RED_BALANCE:		return "Red Balance";
-	case V4L2_CID_BLUE_BALANCE:		return "Blue Balance";
-	case V4L2_CID_GAMMA:			return "Gamma";
-	case V4L2_CID_EXPOSURE:			return "Exposure";
-	case V4L2_CID_AUTOGAIN:			return "Gain, Automatic";
-	case V4L2_CID_GAIN:			return "Gain";
-	case V4L2_CID_HFLIP:			return "Horizontal Flip";
-	case V4L2_CID_VFLIP:			return "Vertical Flip";
-	case V4L2_CID_HCENTER:			return "Horizontal Center";
-	case V4L2_CID_VCENTER:			return "Vertical Center";
-	case V4L2_CID_POWER_LINE_FREQUENCY:	return "Power Line Frequency";
-	case V4L2_CID_HUE_AUTO:			return "Hue, Automatic";
-	case V4L2_CID_WHITE_BALANCE_TEMPERATURE: return "White Balance Temperature";
-	case V4L2_CID_SHARPNESS:		return "Sharpness";
-	case V4L2_CID_BACKLIGHT_COMPENSATION:	return "Backlight Compensation";
-	case V4L2_CID_CHROMA_AGC:		return "Chroma AGC";
-	case V4L2_CID_CHROMA_GAIN:		return "Chroma Gain";
-	case V4L2_CID_COLOR_KILLER:		return "Color Killer";
-	case V4L2_CID_COLORFX:			return "Color Effects";
-	case V4L2_CID_AUTOBRIGHTNESS:		return "Brightness, Automatic";
-	case V4L2_CID_BAND_STOP_FILTER:		return "Band-Stop Filter";
-	case V4L2_CID_ROTATE:			return "Rotate";
-	case V4L2_CID_BG_COLOR:			return "Background Color";
-
-	/* MPEG controls */
-	case V4L2_CID_MPEG_CLASS: 		return "MPEG Encoder Controls";
-	case V4L2_CID_MPEG_AUDIO_SAMPLING_FREQ: return "Audio Sampling Frequency";
-	case V4L2_CID_MPEG_AUDIO_ENCODING: 	return "Audio Encoding";
-	case V4L2_CID_MPEG_AUDIO_L1_BITRATE: 	return "Audio Layer I Bitrate";
-	case V4L2_CID_MPEG_AUDIO_L2_BITRATE: 	return "Audio Layer II Bitrate";
-	case V4L2_CID_MPEG_AUDIO_L3_BITRATE: 	return "Audio Layer III Bitrate";
-	case V4L2_CID_MPEG_AUDIO_AAC_BITRATE: 	return "Audio AAC Bitrate";
-	case V4L2_CID_MPEG_AUDIO_AC3_BITRATE: 	return "Audio AC-3 Bitrate";
-	case V4L2_CID_MPEG_AUDIO_MODE: 		return "Audio Stereo Mode";
-	case V4L2_CID_MPEG_AUDIO_MODE_EXTENSION: return "Audio Stereo Mode Extension";
-	case V4L2_CID_MPEG_AUDIO_EMPHASIS: 	return "Audio Emphasis";
-	case V4L2_CID_MPEG_AUDIO_CRC: 		return "Audio CRC";
-	case V4L2_CID_MPEG_AUDIO_MUTE: 		return "Audio Mute";
-	case V4L2_CID_MPEG_VIDEO_ENCODING: 	return "Video Encoding";
-	case V4L2_CID_MPEG_VIDEO_ASPECT: 	return "Video Aspect";
-	case V4L2_CID_MPEG_VIDEO_B_FRAMES: 	return "Video B Frames";
-	case V4L2_CID_MPEG_VIDEO_GOP_SIZE: 	return "Video GOP Size";
-	case V4L2_CID_MPEG_VIDEO_GOP_CLOSURE: 	return "Video GOP Closure";
-	case V4L2_CID_MPEG_VIDEO_PULLDOWN: 	return "Video Pulldown";
-	case V4L2_CID_MPEG_VIDEO_BITRATE_MODE: 	return "Video Bitrate Mode";
-	case V4L2_CID_MPEG_VIDEO_BITRATE: 	return "Video Bitrate";
-	case V4L2_CID_MPEG_VIDEO_BITRATE_PEAK: 	return "Video Peak Bitrate";
-	case V4L2_CID_MPEG_VIDEO_TEMPORAL_DECIMATION: return "Video Temporal Decimation";
-	case V4L2_CID_MPEG_VIDEO_MUTE: 		return "Video Mute";
-	case V4L2_CID_MPEG_VIDEO_MUTE_YUV:	return "Video Mute YUV";
-	case V4L2_CID_MPEG_STREAM_TYPE: 	return "Stream Type";
-	case V4L2_CID_MPEG_STREAM_PID_PMT: 	return "Stream PMT Program ID";
-	case V4L2_CID_MPEG_STREAM_PID_AUDIO: 	return "Stream Audio Program ID";
-	case V4L2_CID_MPEG_STREAM_PID_VIDEO: 	return "Stream Video Program ID";
-	case V4L2_CID_MPEG_STREAM_PID_PCR: 	return "Stream PCR Program ID";
-	case V4L2_CID_MPEG_STREAM_PES_ID_AUDIO: return "Stream PES Audio ID";
-	case V4L2_CID_MPEG_STREAM_PES_ID_VIDEO: return "Stream PES Video ID";
-	case V4L2_CID_MPEG_STREAM_VBI_FMT:	return "Stream VBI Format";
-
-	/* CAMERA controls */
-	case V4L2_CID_CAMERA_CLASS:		return "Camera Controls";
-	case V4L2_CID_EXPOSURE_AUTO:		return "Auto Exposure";
-	case V4L2_CID_EXPOSURE_ABSOLUTE:	return "Exposure Time, Absolute";
-	case V4L2_CID_EXPOSURE_AUTO_PRIORITY:	return "Exposure, Dynamic Framerate";
-	case V4L2_CID_PAN_RELATIVE:		return "Pan, Relative";
-	case V4L2_CID_TILT_RELATIVE:		return "Tilt, Relative";
-	case V4L2_CID_PAN_RESET:		return "Pan, Reset";
-	case V4L2_CID_TILT_RESET:		return "Tilt, Reset";
-	case V4L2_CID_PAN_ABSOLUTE:		return "Pan, Absolute";
-	case V4L2_CID_TILT_ABSOLUTE:		return "Tilt, Absolute";
-	case V4L2_CID_FOCUS_ABSOLUTE:		return "Focus, Absolute";
-	case V4L2_CID_FOCUS_RELATIVE:		return "Focus, Relative";
-	case V4L2_CID_FOCUS_AUTO:		return "Focus, Automatic";
-	case V4L2_CID_IRIS_ABSOLUTE:		return "Iris, Absolute";
-	case V4L2_CID_IRIS_RELATIVE:		return "Iris, Relative";
-	case V4L2_CID_ZOOM_ABSOLUTE:		return "Zoom, Absolute";
-	case V4L2_CID_ZOOM_RELATIVE:		return "Zoom, Relative";
-	case V4L2_CID_ZOOM_CONTINUOUS:		return "Zoom, Continuous";
-	case V4L2_CID_PRIVACY:			return "Privacy";
-
-	/* FM Radio Modulator control */
-	case V4L2_CID_FM_TX_CLASS:		return "FM Radio Modulator Controls";
-	case V4L2_CID_RDS_TX_DEVIATION:		return "RDS Signal Deviation";
-	case V4L2_CID_RDS_TX_PI:		return "RDS Program ID";
-	case V4L2_CID_RDS_TX_PTY:		return "RDS Program Type";
-	case V4L2_CID_RDS_TX_PS_NAME:		return "RDS PS Name";
-	case V4L2_CID_RDS_TX_RADIO_TEXT:	return "RDS Radio Text";
-	case V4L2_CID_AUDIO_LIMITER_ENABLED:	return "Audio Limiter Feature Enabled";
-	case V4L2_CID_AUDIO_LIMITER_RELEASE_TIME: return "Audio Limiter Release Time";
-	case V4L2_CID_AUDIO_LIMITER_DEVIATION:	return "Audio Limiter Deviation";
-	case V4L2_CID_AUDIO_COMPRESSION_ENABLED: return "Audio Compression Feature Enabled";
-	case V4L2_CID_AUDIO_COMPRESSION_GAIN:	return "Audio Compression Gain";
-	case V4L2_CID_AUDIO_COMPRESSION_THRESHOLD: return "Audio Compression Threshold";
-	case V4L2_CID_AUDIO_COMPRESSION_ATTACK_TIME: return "Audio Compression Attack Time";
-	case V4L2_CID_AUDIO_COMPRESSION_RELEASE_TIME: return "Audio Compression Release Time";
-	case V4L2_CID_PILOT_TONE_ENABLED:	return "Pilot Tone Feature Enabled";
-	case V4L2_CID_PILOT_TONE_DEVIATION:	return "Pilot Tone Deviation";
-	case V4L2_CID_PILOT_TONE_FREQUENCY:	return "Pilot Tone Frequency";
-	case V4L2_CID_TUNE_PREEMPHASIS:	return "Pre-emphasis settings";
-	case V4L2_CID_TUNE_POWER_LEVEL:		return "Tune Power Level";
-	case V4L2_CID_TUNE_ANTENNA_CAPACITOR:	return "Tune Antenna Capacitor";
-
-	default:
-		return NULL;
-	}
-}
-EXPORT_SYMBOL(v4l2_ctrl_get_name);
-
 /* Fill in a struct v4l2_queryctrl */
 int v4l2_ctrl_query_fill(struct v4l2_queryctrl *qctrl, s32 min, s32 max, s32 step, s32 def)
 {
-	const char *name = v4l2_ctrl_get_name(qctrl->id);
+	const char *name;
+
+	v4l2_ctrl_fill(qctrl->id, &name, &qctrl->type,
+		       &min, &max, &step, &def, &qctrl->flags);
 
-	qctrl->flags = 0;
 	if (name == NULL)
 		return -EINVAL;
 
-	switch (qctrl->id) {
-	case V4L2_CID_AUDIO_MUTE:
-	case V4L2_CID_AUDIO_LOUDNESS:
-	case V4L2_CID_AUTO_WHITE_BALANCE:
-	case V4L2_CID_AUTOGAIN:
-	case V4L2_CID_HFLIP:
-	case V4L2_CID_VFLIP:
-	case V4L2_CID_HUE_AUTO:
-	case V4L2_CID_CHROMA_AGC:
-	case V4L2_CID_COLOR_KILLER:
-	case V4L2_CID_MPEG_AUDIO_MUTE:
-	case V4L2_CID_MPEG_VIDEO_MUTE:
-	case V4L2_CID_MPEG_VIDEO_GOP_CLOSURE:
-	case V4L2_CID_MPEG_VIDEO_PULLDOWN:
-	case V4L2_CID_EXPOSURE_AUTO_PRIORITY:
-	case V4L2_CID_FOCUS_AUTO:
-	case V4L2_CID_PRIVACY:
-	case V4L2_CID_AUDIO_LIMITER_ENABLED:
-	case V4L2_CID_AUDIO_COMPRESSION_ENABLED:
-	case V4L2_CID_PILOT_TONE_ENABLED:
-		qctrl->type = V4L2_CTRL_TYPE_BOOLEAN;
-		min = 0;
-		max = step = 1;
-		break;
-	case V4L2_CID_PAN_RESET:
-	case V4L2_CID_TILT_RESET:
-		qctrl->type = V4L2_CTRL_TYPE_BUTTON;
-		qctrl->flags |= V4L2_CTRL_FLAG_WRITE_ONLY;
-		min = max = step = def = 0;
-		break;
-	case V4L2_CID_POWER_LINE_FREQUENCY:
-	case V4L2_CID_MPEG_AUDIO_SAMPLING_FREQ:
-	case V4L2_CID_MPEG_AUDIO_ENCODING:
-	case V4L2_CID_MPEG_AUDIO_L1_BITRATE:
-	case V4L2_CID_MPEG_AUDIO_L2_BITRATE:
-	case V4L2_CID_MPEG_AUDIO_L3_BITRATE:
-	case V4L2_CID_MPEG_AUDIO_AC3_BITRATE:
-	case V4L2_CID_MPEG_AUDIO_MODE:
-	case V4L2_CID_MPEG_AUDIO_MODE_EXTENSION:
-	case V4L2_CID_MPEG_AUDIO_EMPHASIS:
-	case V4L2_CID_MPEG_AUDIO_CRC:
-	case V4L2_CID_MPEG_VIDEO_ENCODING:
-	case V4L2_CID_MPEG_VIDEO_ASPECT:
-	case V4L2_CID_MPEG_VIDEO_BITRATE_MODE:
-	case V4L2_CID_MPEG_STREAM_TYPE:
-	case V4L2_CID_MPEG_STREAM_VBI_FMT:
-	case V4L2_CID_EXPOSURE_AUTO:
-	case V4L2_CID_COLORFX:
-	case V4L2_CID_TUNE_PREEMPHASIS:
-		qctrl->type = V4L2_CTRL_TYPE_MENU;
-		step = 1;
-		break;
-	case V4L2_CID_RDS_TX_PS_NAME:
-	case V4L2_CID_RDS_TX_RADIO_TEXT:
-		qctrl->type = V4L2_CTRL_TYPE_STRING;
-		break;
-	case V4L2_CID_USER_CLASS:
-	case V4L2_CID_CAMERA_CLASS:
-	case V4L2_CID_MPEG_CLASS:
-	case V4L2_CID_FM_TX_CLASS:
-		qctrl->type = V4L2_CTRL_TYPE_CTRL_CLASS;
-		qctrl->flags |= V4L2_CTRL_FLAG_READ_ONLY;
-		min = max = step = def = 0;
-		break;
-	case V4L2_CID_BG_COLOR:
-		qctrl->type = V4L2_CTRL_TYPE_INTEGER;
-		step = 1;
-		min = 0;
-		/* Max is calculated as RGB888 that is 2^24 */
-		max = 0xFFFFFF;
-		break;
-	default:
-		qctrl->type = V4L2_CTRL_TYPE_INTEGER;
-		break;
-	}
-	switch (qctrl->id) {
-	case V4L2_CID_MPEG_AUDIO_ENCODING:
-	case V4L2_CID_MPEG_AUDIO_MODE:
-	case V4L2_CID_MPEG_VIDEO_BITRATE_MODE:
-	case V4L2_CID_MPEG_VIDEO_B_FRAMES:
-	case V4L2_CID_MPEG_STREAM_TYPE:
-		qctrl->flags |= V4L2_CTRL_FLAG_UPDATE;
-		break;
-	case V4L2_CID_AUDIO_VOLUME:
-	case V4L2_CID_AUDIO_BALANCE:
-	case V4L2_CID_AUDIO_BASS:
-	case V4L2_CID_AUDIO_TREBLE:
-	case V4L2_CID_BRIGHTNESS:
-	case V4L2_CID_CONTRAST:
-	case V4L2_CID_SATURATION:
-	case V4L2_CID_HUE:
-	case V4L2_CID_RED_BALANCE:
-	case V4L2_CID_BLUE_BALANCE:
-	case V4L2_CID_GAMMA:
-	case V4L2_CID_SHARPNESS:
-	case V4L2_CID_CHROMA_GAIN:
-	case V4L2_CID_RDS_TX_DEVIATION:
-	case V4L2_CID_AUDIO_LIMITER_RELEASE_TIME:
-	case V4L2_CID_AUDIO_LIMITER_DEVIATION:
-	case V4L2_CID_AUDIO_COMPRESSION_GAIN:
-	case V4L2_CID_AUDIO_COMPRESSION_THRESHOLD:
-	case V4L2_CID_AUDIO_COMPRESSION_ATTACK_TIME:
-	case V4L2_CID_AUDIO_COMPRESSION_RELEASE_TIME:
-	case V4L2_CID_PILOT_TONE_DEVIATION:
-	case V4L2_CID_PILOT_TONE_FREQUENCY:
-	case V4L2_CID_TUNE_POWER_LEVEL:
-	case V4L2_CID_TUNE_ANTENNA_CAPACITOR:
-		qctrl->flags |= V4L2_CTRL_FLAG_SLIDER;
-		break;
-	case V4L2_CID_PAN_RELATIVE:
-	case V4L2_CID_TILT_RELATIVE:
-	case V4L2_CID_FOCUS_RELATIVE:
-	case V4L2_CID_IRIS_RELATIVE:
-	case V4L2_CID_ZOOM_RELATIVE:
-		qctrl->flags |= V4L2_CTRL_FLAG_WRITE_ONLY;
-		break;
-	}
 	qctrl->minimum = min;
 	qctrl->maximum = max;
 	qctrl->step = step;

drivers/media/video/v4l2-ctrls.c

@@ -0,0 +1,1851 @@
+/*
+    V4L2 controls framework implementation.
+
+    Copyright (C) 2010  Hans Verkuil <hverkuil@xs4all.nl>
+
+    This program is free software; you can redistribute it and/or modify
+    it under the terms of the GNU General Public License as published by
+    the Free Software Foundation; either version 2 of the License, or
+    (at your option) any later version.
+
+    This program is distributed in the hope that it will be useful,
+    but WITHOUT ANY WARRANTY; without even the implied warranty of
+    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+    GNU General Public License for more details.
+
+    You should have received a copy of the GNU General Public License
+    along with this program; if not, write to the Free Software
+    Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+#include <linux/ctype.h>
+#include <media/v4l2-ioctl.h>
+#include <media/v4l2-device.h>
+#include <media/v4l2-ctrls.h>
+#include <media/v4l2-dev.h>
+
+/* Internal temporary helper struct, one for each v4l2_ext_control */
+struct ctrl_helper {
+	/* The control corresponding to the v4l2_ext_control ID field. */
+	struct v4l2_ctrl *ctrl;
+	/* Used internally to mark whether this control was already
+	   processed. */
+	bool handled;
+};
+
+/* Returns NULL or a character pointer array containing the menu for
+   the given control ID. The pointer array ends with a NULL pointer.
+   An empty string signifies a menu entry that is invalid. This allows
+   drivers to disable certain options if it is not supported. */
+const char **v4l2_ctrl_get_menu(u32 id)
+{
+	static const char *mpeg_audio_sampling_freq[] = {
+		"44.1 kHz",
+		"48 kHz",
+		"32 kHz",
+		NULL
+	};
+	static const char *mpeg_audio_encoding[] = {
+		"MPEG-1/2 Layer I",
+		"MPEG-1/2 Layer II",
+		"MPEG-1/2 Layer III",
+		"MPEG-2/4 AAC",
+		"AC-3",
+		NULL
+	};
+	static const char *mpeg_audio_l1_bitrate[] = {
+		"32 kbps",
+		"64 kbps",
+		"96 kbps",
+		"128 kbps",
+		"160 kbps",
+		"192 kbps",
+		"224 kbps",
+		"256 kbps",
+		"288 kbps",
+		"320 kbps",
+		"352 kbps",
+		"384 kbps",
+		"416 kbps",
+		"448 kbps",
+		NULL
+	};
+	static const char *mpeg_audio_l2_bitrate[] = {
+		"32 kbps",
+		"48 kbps",
+		"56 kbps",
+		"64 kbps",
+		"80 kbps",
+		"96 kbps",
+		"112 kbps",
+		"128 kbps",
+		"160 kbps",
+		"192 kbps",
+		"224 kbps",
+		"256 kbps",
+		"320 kbps",
+		"384 kbps",
+		NULL
+	};
+	static const char *mpeg_audio_l3_bitrate[] = {
+		"32 kbps",
+		"40 kbps",
+		"48 kbps",
+		"56 kbps",
+		"64 kbps",
+		"80 kbps",
+		"96 kbps",
+		"112 kbps",
+		"128 kbps",
+		"160 kbps",
+		"192 kbps",
+		"224 kbps",
+		"256 kbps",
+		"320 kbps",
+		NULL
+	};
+	static const char *mpeg_audio_ac3_bitrate[] = {
+		"32 kbps",
+		"40 kbps",
+		"48 kbps",
+		"56 kbps",
+		"64 kbps",
+		"80 kbps",
+		"96 kbps",
+		"112 kbps",
+		"128 kbps",
+		"160 kbps",
+		"192 kbps",
+		"224 kbps",
+		"256 kbps",
+		"320 kbps",
+		"384 kbps",
+		"448 kbps",
+		"512 kbps",
+		"576 kbps",
+		"640 kbps",
+		NULL
+	};
+	static const char *mpeg_audio_mode[] = {
+		"Stereo",
+		"Joint Stereo",
+		"Dual",
+		"Mono",
+		NULL
+	};
+	static const char *mpeg_audio_mode_extension[] = {
+		"Bound 4",
+		"Bound 8",
+		"Bound 12",
+		"Bound 16",
+		NULL
+	};
+	static const char *mpeg_audio_emphasis[] = {
+		"No Emphasis",
+		"50/15 us",
+		"CCITT J17",
+		NULL
+	};
+	static const char *mpeg_audio_crc[] = {
+		"No CRC",
+		"16-bit CRC",
+		NULL
+	};
+	static const char *mpeg_video_encoding[] = {
+		"MPEG-1",
+		"MPEG-2",
+		"MPEG-4 AVC",
+		NULL
+	};
+	static const char *mpeg_video_aspect[] = {
+		"1x1",
+		"4x3",
+		"16x9",
+		"2.21x1",
+		NULL
+	};
+	static const char *mpeg_video_bitrate_mode[] = {
+		"Variable Bitrate",
+		"Constant Bitrate",
+		NULL
+	};
+	static const char *mpeg_stream_type[] = {
+		"MPEG-2 Program Stream",
+		"MPEG-2 Transport Stream",
+		"MPEG-1 System Stream",
+		"MPEG-2 DVD-compatible Stream",
+		"MPEG-1 VCD-compatible Stream",
+		"MPEG-2 SVCD-compatible Stream",
+		NULL
+	};
+	static const char *mpeg_stream_vbi_fmt[] = {
+		"No VBI",
+		"Private packet, IVTV format",
+		NULL
+	};
+	static const char *camera_power_line_frequency[] = {
+		"Disabled",
+		"50 Hz",
+		"60 Hz",
+		NULL
+	};
+	static const char *camera_exposure_auto[] = {
+		"Auto Mode",
+		"Manual Mode",
+		"Shutter Priority Mode",
+		"Aperture Priority Mode",
+		NULL
+	};
+	static const char *colorfx[] = {
+		"None",
+		"Black & White",
+		"Sepia",
+		"Negative",
+		"Emboss",
+		"Sketch",
+		"Sky blue",
+		"Grass green",
+		"Skin whiten",
+		"Vivid",
+		NULL
+	};
+	static const char *tune_preemphasis[] = {
+		"No preemphasis",
+		"50 useconds",
+		"75 useconds",
+		NULL,
+	};
+
+	switch (id) {
+	case V4L2_CID_MPEG_AUDIO_SAMPLING_FREQ:
+		return mpeg_audio_sampling_freq;
+	case V4L2_CID_MPEG_AUDIO_ENCODING:
+		return mpeg_audio_encoding;
+	case V4L2_CID_MPEG_AUDIO_L1_BITRATE:
+		return mpeg_audio_l1_bitrate;
+	case V4L2_CID_MPEG_AUDIO_L2_BITRATE:
+		return mpeg_audio_l2_bitrate;
+	case V4L2_CID_MPEG_AUDIO_L3_BITRATE:
+		return mpeg_audio_l3_bitrate;
+	case V4L2_CID_MPEG_AUDIO_AC3_BITRATE:
+		return mpeg_audio_ac3_bitrate;
+	case V4L2_CID_MPEG_AUDIO_MODE:
+		return mpeg_audio_mode;
+	case V4L2_CID_MPEG_AUDIO_MODE_EXTENSION:
+		return mpeg_audio_mode_extension;
+	case V4L2_CID_MPEG_AUDIO_EMPHASIS:
+		return mpeg_audio_emphasis;
+	case V4L2_CID_MPEG_AUDIO_CRC:
+		return mpeg_audio_crc;
+	case V4L2_CID_MPEG_VIDEO_ENCODING:
+		return mpeg_video_encoding;
+	case V4L2_CID_MPEG_VIDEO_ASPECT:
+		return mpeg_video_aspect;
+	case V4L2_CID_MPEG_VIDEO_BITRATE_MODE:
+		return mpeg_video_bitrate_mode;
+	case V4L2_CID_MPEG_STREAM_TYPE:
+		return mpeg_stream_type;
+	case V4L2_CID_MPEG_STREAM_VBI_FMT:
+		return mpeg_stream_vbi_fmt;
+	case V4L2_CID_POWER_LINE_FREQUENCY:
+		return camera_power_line_frequency;
+	case V4L2_CID_EXPOSURE_AUTO:
+		return camera_exposure_auto;
+	case V4L2_CID_COLORFX:
+		return colorfx;
+	case V4L2_CID_TUNE_PREEMPHASIS:
+		return tune_preemphasis;
+	default:
+		return NULL;
+	}
+}
+EXPORT_SYMBOL(v4l2_ctrl_get_menu);
+
+/* Return the control name. */
+const char *v4l2_ctrl_get_name(u32 id)
+{
+	switch (id) {
+	/* USER controls */
+	/* Keep the order of the 'case's the same as in videodev2.h! */
+	case V4L2_CID_USER_CLASS:		return "User Controls";
+	case V4L2_CID_BRIGHTNESS:		return "Brightness";
+	case V4L2_CID_CONTRAST:			return "Contrast";
+	case V4L2_CID_SATURATION:		return "Saturation";
+	case V4L2_CID_HUE:			return "Hue";
+	case V4L2_CID_AUDIO_VOLUME:		return "Volume";
+	case V4L2_CID_AUDIO_BALANCE:		return "Balance";
+	case V4L2_CID_AUDIO_BASS:		return "Bass";
+	case V4L2_CID_AUDIO_TREBLE:		return "Treble";
+	case V4L2_CID_AUDIO_MUTE:		return "Mute";
+	case V4L2_CID_AUDIO_LOUDNESS:		return "Loudness";
+	case V4L2_CID_BLACK_LEVEL:		return "Black Level";
+	case V4L2_CID_AUTO_WHITE_BALANCE:	return "White Balance, Automatic";
+	case V4L2_CID_DO_WHITE_BALANCE:		return "Do White Balance";
+	case V4L2_CID_RED_BALANCE:		return "Red Balance";
+	case V4L2_CID_BLUE_BALANCE:		return "Blue Balance";
+	case V4L2_CID_GAMMA:			return "Gamma";
+	case V4L2_CID_EXPOSURE:			return "Exposure";
+	case V4L2_CID_AUTOGAIN:			return "Gain, Automatic";
+	case V4L2_CID_GAIN:			return "Gain";
+	case V4L2_CID_HFLIP:			return "Horizontal Flip";
+	case V4L2_CID_VFLIP:			return "Vertical Flip";
+	case V4L2_CID_HCENTER:			return "Horizontal Center";
+	case V4L2_CID_VCENTER:			return "Vertical Center";
+	case V4L2_CID_POWER_LINE_FREQUENCY:	return "Power Line Frequency";
+	case V4L2_CID_HUE_AUTO:			return "Hue, Automatic";
+	case V4L2_CID_WHITE_BALANCE_TEMPERATURE: return "White Balance Temperature";
+	case V4L2_CID_SHARPNESS:		return "Sharpness";
+	case V4L2_CID_BACKLIGHT_COMPENSATION:	return "Backlight Compensation";
+	case V4L2_CID_CHROMA_AGC:		return "Chroma AGC";
+	case V4L2_CID_COLOR_KILLER:		return "Color Killer";
+	case V4L2_CID_COLORFX:			return "Color Effects";
+	case V4L2_CID_AUTOBRIGHTNESS:		return "Brightness, Automatic";
+	case V4L2_CID_BAND_STOP_FILTER:		return "Band-Stop Filter";
+	case V4L2_CID_ROTATE:			return "Rotate";
+	case V4L2_CID_BG_COLOR:			return "Background Color";
+	case V4L2_CID_CHROMA_GAIN:		return "Chroma Gain";
+
+	/* MPEG controls */
+	/* Keep the order of the 'case's the same as in videodev2.h! */
+	case V4L2_CID_MPEG_CLASS:		return "MPEG Encoder Controls";
+	case V4L2_CID_MPEG_STREAM_TYPE:		return "Stream Type";
+	case V4L2_CID_MPEG_STREAM_PID_PMT:	return "Stream PMT Program ID";
+	case V4L2_CID_MPEG_STREAM_PID_AUDIO:	return "Stream Audio Program ID";
+	case V4L2_CID_MPEG_STREAM_PID_VIDEO:	return "Stream Video Program ID";
+	case V4L2_CID_MPEG_STREAM_PID_PCR:	return "Stream PCR Program ID";
+	case V4L2_CID_MPEG_STREAM_PES_ID_AUDIO: return "Stream PES Audio ID";
+	case V4L2_CID_MPEG_STREAM_PES_ID_VIDEO: return "Stream PES Video ID";
+	case V4L2_CID_MPEG_STREAM_VBI_FMT:	return "Stream VBI Format";
+	case V4L2_CID_MPEG_AUDIO_SAMPLING_FREQ: return "Audio Sampling Frequency";
+	case V4L2_CID_MPEG_AUDIO_ENCODING:	return "Audio Encoding";
+	case V4L2_CID_MPEG_AUDIO_L1_BITRATE:	return "Audio Layer I Bitrate";
+	case V4L2_CID_MPEG_AUDIO_L2_BITRATE:	return "Audio Layer II Bitrate";
+	case V4L2_CID_MPEG_AUDIO_L3_BITRATE:	return "Audio Layer III Bitrate";
+	case V4L2_CID_MPEG_AUDIO_MODE:		return "Audio Stereo Mode";
+	case V4L2_CID_MPEG_AUDIO_MODE_EXTENSION: return "Audio Stereo Mode Extension";
+	case V4L2_CID_MPEG_AUDIO_EMPHASIS:	return "Audio Emphasis";
+	case V4L2_CID_MPEG_AUDIO_CRC:		return "Audio CRC";
+	case V4L2_CID_MPEG_AUDIO_MUTE:		return "Audio Mute";
+	case V4L2_CID_MPEG_AUDIO_AAC_BITRATE:	return "Audio AAC Bitrate";
+	case V4L2_CID_MPEG_AUDIO_AC3_BITRATE:	return "Audio AC-3 Bitrate";
+	case V4L2_CID_MPEG_VIDEO_ENCODING:	return "Video Encoding";
+	case V4L2_CID_MPEG_VIDEO_ASPECT:	return "Video Aspect";
+	case V4L2_CID_MPEG_VIDEO_B_FRAMES:	return "Video B Frames";
+	case V4L2_CID_MPEG_VIDEO_GOP_SIZE:	return "Video GOP Size";
+	case V4L2_CID_MPEG_VIDEO_GOP_CLOSURE:	return "Video GOP Closure";
+	case V4L2_CID_MPEG_VIDEO_PULLDOWN:	return "Video Pulldown";
+	case V4L2_CID_MPEG_VIDEO_BITRATE_MODE:	return "Video Bitrate Mode";
+	case V4L2_CID_MPEG_VIDEO_BITRATE:	return "Video Bitrate";
+	case V4L2_CID_MPEG_VIDEO_BITRATE_PEAK:	return "Video Peak Bitrate";
+	case V4L2_CID_MPEG_VIDEO_TEMPORAL_DECIMATION: return "Video Temporal Decimation";
+	case V4L2_CID_MPEG_VIDEO_MUTE:		return "Video Mute";
+	case V4L2_CID_MPEG_VIDEO_MUTE_YUV:	return "Video Mute YUV";
+
+	/* CAMERA controls */
+	/* Keep the order of the 'case's the same as in videodev2.h! */
+	case V4L2_CID_CAMERA_CLASS:		return "Camera Controls";
+	case V4L2_CID_EXPOSURE_AUTO:		return "Auto Exposure";
+	case V4L2_CID_EXPOSURE_ABSOLUTE:	return "Exposure Time, Absolute";
+	case V4L2_CID_EXPOSURE_AUTO_PRIORITY:	return "Exposure, Dynamic Framerate";
+	case V4L2_CID_PAN_RELATIVE:		return "Pan, Relative";
+	case V4L2_CID_TILT_RELATIVE:		return "Tilt, Relative";
+	case V4L2_CID_PAN_RESET:		return "Pan, Reset";
+	case V4L2_CID_TILT_RESET:		return "Tilt, Reset";
+	case V4L2_CID_PAN_ABSOLUTE:		return "Pan, Absolute";
+	case V4L2_CID_TILT_ABSOLUTE:		return "Tilt, Absolute";
+	case V4L2_CID_FOCUS_ABSOLUTE:		return "Focus, Absolute";
+	case V4L2_CID_FOCUS_RELATIVE:		return "Focus, Relative";
+	case V4L2_CID_FOCUS_AUTO:		return "Focus, Automatic";
+	case V4L2_CID_ZOOM_ABSOLUTE:		return "Zoom, Absolute";
+	case V4L2_CID_ZOOM_RELATIVE:		return "Zoom, Relative";
+	case V4L2_CID_ZOOM_CONTINUOUS:		return "Zoom, Continuous";
+	case V4L2_CID_PRIVACY:			return "Privacy";
+	case V4L2_CID_IRIS_ABSOLUTE:		return "Iris, Absolute";
+	case V4L2_CID_IRIS_RELATIVE:		return "Iris, Relative";
+
+	/* FM Radio Modulator control */
+	/* Keep the order of the 'case's the same as in videodev2.h! */
+	case V4L2_CID_FM_TX_CLASS:		return "FM Radio Modulator Controls";
+	case V4L2_CID_RDS_TX_DEVIATION:		return "RDS Signal Deviation";
+	case V4L2_CID_RDS_TX_PI:		return "RDS Program ID";
+	case V4L2_CID_RDS_TX_PTY:		return "RDS Program Type";
+	case V4L2_CID_RDS_TX_PS_NAME:		return "RDS PS Name";
+	case V4L2_CID_RDS_TX_RADIO_TEXT:	return "RDS Radio Text";
+	case V4L2_CID_AUDIO_LIMITER_ENABLED:	return "Audio Limiter Feature Enabled";
+	case V4L2_CID_AUDIO_LIMITER_RELEASE_TIME: return "Audio Limiter Release Time";
+	case V4L2_CID_AUDIO_LIMITER_DEVIATION:	return "Audio Limiter Deviation";
+	case V4L2_CID_AUDIO_COMPRESSION_ENABLED: return "Audio Compression Feature Enabled";
+	case V4L2_CID_AUDIO_COMPRESSION_GAIN:	return "Audio Compression Gain";
+	case V4L2_CID_AUDIO_COMPRESSION_THRESHOLD: return "Audio Compression Threshold";
+	case V4L2_CID_AUDIO_COMPRESSION_ATTACK_TIME: return "Audio Compression Attack Time";
+	case V4L2_CID_AUDIO_COMPRESSION_RELEASE_TIME: return "Audio Compression Release Time";
+	case V4L2_CID_PILOT_TONE_ENABLED:	return "Pilot Tone Feature Enabled";
+	case V4L2_CID_PILOT_TONE_DEVIATION:	return "Pilot Tone Deviation";
+	case V4L2_CID_PILOT_TONE_FREQUENCY:	return "Pilot Tone Frequency";
+	case V4L2_CID_TUNE_PREEMPHASIS:		return "Pre-emphasis settings";
+	case V4L2_CID_TUNE_POWER_LEVEL:		return "Tune Power Level";
+	case V4L2_CID_TUNE_ANTENNA_CAPACITOR:	return "Tune Antenna Capacitor";
+
+	default:
+		return NULL;
+	}
+}
+EXPORT_SYMBOL(v4l2_ctrl_get_name);
+
+void v4l2_ctrl_fill(u32 id, const char **name, enum v4l2_ctrl_type *type,
+		    s32 *min, s32 *max, s32 *step, s32 *def, u32 *flags)
+{
+	*name = v4l2_ctrl_get_name(id);
+	*flags = 0;
+
+	switch (id) {
+	case V4L2_CID_AUDIO_MUTE:
+	case V4L2_CID_AUDIO_LOUDNESS:
+	case V4L2_CID_AUTO_WHITE_BALANCE:
+	case V4L2_CID_AUTOGAIN:
+	case V4L2_CID_HFLIP:
+	case V4L2_CID_VFLIP:
+	case V4L2_CID_HUE_AUTO:
+	case V4L2_CID_CHROMA_AGC:
+	case V4L2_CID_COLOR_KILLER:
+	case V4L2_CID_MPEG_AUDIO_MUTE:
+	case V4L2_CID_MPEG_VIDEO_MUTE:
+	case V4L2_CID_MPEG_VIDEO_GOP_CLOSURE:
+	case V4L2_CID_MPEG_VIDEO_PULLDOWN:
+	case V4L2_CID_EXPOSURE_AUTO_PRIORITY:
+	case V4L2_CID_FOCUS_AUTO:
+	case V4L2_CID_PRIVACY:
+	case V4L2_CID_AUDIO_LIMITER_ENABLED:
+	case V4L2_CID_AUDIO_COMPRESSION_ENABLED:
+	case V4L2_CID_PILOT_TONE_ENABLED:
+		*type = V4L2_CTRL_TYPE_BOOLEAN;
+		*min = 0;
+		*max = *step = 1;
+		break;
+	case V4L2_CID_PAN_RESET:
+	case V4L2_CID_TILT_RESET:
+		*type = V4L2_CTRL_TYPE_BUTTON;
+		*flags |= V4L2_CTRL_FLAG_WRITE_ONLY;
+		*min = *max = *step = *def = 0;
+		break;
+	case V4L2_CID_POWER_LINE_FREQUENCY:
+	case V4L2_CID_MPEG_AUDIO_SAMPLING_FREQ:
+	case V4L2_CID_MPEG_AUDIO_ENCODING:
+	case V4L2_CID_MPEG_AUDIO_L1_BITRATE:
+	case V4L2_CID_MPEG_AUDIO_L2_BITRATE:
+	case V4L2_CID_MPEG_AUDIO_L3_BITRATE:
+	case V4L2_CID_MPEG_AUDIO_AC3_BITRATE:
+	case V4L2_CID_MPEG_AUDIO_MODE:
+	case V4L2_CID_MPEG_AUDIO_MODE_EXTENSION:
+	case V4L2_CID_MPEG_AUDIO_EMPHASIS:
+	case V4L2_CID_MPEG_AUDIO_CRC:
+	case V4L2_CID_MPEG_VIDEO_ENCODING:
+	case V4L2_CID_MPEG_VIDEO_ASPECT:
+	case V4L2_CID_MPEG_VIDEO_BITRATE_MODE:
+	case V4L2_CID_MPEG_STREAM_TYPE:
+	case V4L2_CID_MPEG_STREAM_VBI_FMT:
+	case V4L2_CID_EXPOSURE_AUTO:
+	case V4L2_CID_COLORFX:
+	case V4L2_CID_TUNE_PREEMPHASIS:
+		*type = V4L2_CTRL_TYPE_MENU;
+		break;
+	case V4L2_CID_RDS_TX_PS_NAME:
+	case V4L2_CID_RDS_TX_RADIO_TEXT:
+		*type = V4L2_CTRL_TYPE_STRING;
+		break;
+	case V4L2_CID_USER_CLASS:
+	case V4L2_CID_CAMERA_CLASS:
+	case V4L2_CID_MPEG_CLASS:
+	case V4L2_CID_FM_TX_CLASS:
+		*type = V4L2_CTRL_TYPE_CTRL_CLASS;
+		/* You can neither read not write these */
+		*flags |= V4L2_CTRL_FLAG_READ_ONLY | V4L2_CTRL_FLAG_WRITE_ONLY;
+		*min = *max = *step = *def = 0;
+		break;
+	case V4L2_CID_BG_COLOR:
+		*type = V4L2_CTRL_TYPE_INTEGER;
+		*step = 1;
+		*min = 0;
+		/* Max is calculated as RGB888 that is 2^24 */
+		*max = 0xFFFFFF;
+		break;
+	default:
+		*type = V4L2_CTRL_TYPE_INTEGER;
+		break;
+	}
+	switch (id) {
+	case V4L2_CID_MPEG_AUDIO_ENCODING:
+	case V4L2_CID_MPEG_AUDIO_MODE:
+	case V4L2_CID_MPEG_VIDEO_BITRATE_MODE:
+	case V4L2_CID_MPEG_VIDEO_B_FRAMES:
+	case V4L2_CID_MPEG_STREAM_TYPE:
+		*flags |= V4L2_CTRL_FLAG_UPDATE;
+		break;
+	case V4L2_CID_AUDIO_VOLUME:
+	case V4L2_CID_AUDIO_BALANCE:
+	case V4L2_CID_AUDIO_BASS:
+	case V4L2_CID_AUDIO_TREBLE:
+	case V4L2_CID_BRIGHTNESS:
+	case V4L2_CID_CONTRAST:
+	case V4L2_CID_SATURATION:
+	case V4L2_CID_HUE:
+	case V4L2_CID_RED_BALANCE:
+	case V4L2_CID_BLUE_BALANCE:
+	case V4L2_CID_GAMMA:
+	case V4L2_CID_SHARPNESS:
+	case V4L2_CID_CHROMA_GAIN:
+	case V4L2_CID_RDS_TX_DEVIATION:
+	case V4L2_CID_AUDIO_LIMITER_RELEASE_TIME:
+	case V4L2_CID_AUDIO_LIMITER_DEVIATION:
+	case V4L2_CID_AUDIO_COMPRESSION_GAIN:
+	case V4L2_CID_AUDIO_COMPRESSION_THRESHOLD:
+	case V4L2_CID_AUDIO_COMPRESSION_ATTACK_TIME:
+	case V4L2_CID_AUDIO_COMPRESSION_RELEASE_TIME:
+	case V4L2_CID_PILOT_TONE_DEVIATION:
+	case V4L2_CID_PILOT_TONE_FREQUENCY:
+	case V4L2_CID_TUNE_POWER_LEVEL:
+	case V4L2_CID_TUNE_ANTENNA_CAPACITOR:
+		*flags |= V4L2_CTRL_FLAG_SLIDER;
+		break;
+	case V4L2_CID_PAN_RELATIVE:
+	case V4L2_CID_TILT_RELATIVE:
+	case V4L2_CID_FOCUS_RELATIVE:
+	case V4L2_CID_IRIS_RELATIVE:
+	case V4L2_CID_ZOOM_RELATIVE:
+		*flags |= V4L2_CTRL_FLAG_WRITE_ONLY;
+		break;
+	}
+}
+EXPORT_SYMBOL(v4l2_ctrl_fill);
+
+/* Helper function to determine whether the control type is compatible with
+   VIDIOC_G/S_CTRL. */
+static bool type_is_int(const struct v4l2_ctrl *ctrl)
+{
+	switch (ctrl->type) {
+	case V4L2_CTRL_TYPE_INTEGER64:
+	case V4L2_CTRL_TYPE_STRING:
+		/* Nope, these need v4l2_ext_control */
+		return false;
+	default:
+		return true;
+	}
+}
+
+/* Helper function: copy the current control value back to the caller */
+static int cur_to_user(struct v4l2_ext_control *c,
+		       struct v4l2_ctrl *ctrl)
+{
+	u32 len;
+
+	switch (ctrl->type) {
+	case V4L2_CTRL_TYPE_STRING:
+		len = strlen(ctrl->cur.string);
+		if (c->size < len + 1) {
+			c->size = len + 1;
+			return -ENOSPC;
+		}
+		return copy_to_user(c->string, ctrl->cur.string,
+						len + 1) ? -EFAULT : 0;
+	case V4L2_CTRL_TYPE_INTEGER64:
+		c->value64 = ctrl->cur.val64;
+		break;
+	default:
+		c->value = ctrl->cur.val;
+		break;
+	}
+	return 0;
+}
+
+/* Helper function: copy the caller-provider value as the new control value */
+static int user_to_new(struct v4l2_ext_control *c,
+		       struct v4l2_ctrl *ctrl)
+{
+	int ret;
+	u32 size;
+
+	ctrl->has_new = 1;
+	switch (ctrl->type) {
+	case V4L2_CTRL_TYPE_INTEGER64:
+		ctrl->val64 = c->value64;
+		break;
+	case V4L2_CTRL_TYPE_STRING:
+		size = c->size;
+		if (size == 0)
+			return -ERANGE;
+		if (size > ctrl->maximum + 1)
+			size = ctrl->maximum + 1;
+		ret = copy_from_user(ctrl->string, c->string, size);
+		if (!ret) {
+			char last = ctrl->string[size - 1];
+
+			ctrl->string[size - 1] = 0;
+			/* If the string was longer than ctrl->maximum,
+			   then return an error. */
+			if (strlen(ctrl->string) == ctrl->maximum && last)
+				return -ERANGE;
+		}
+		return ret ? -EFAULT : 0;
+	default:
+		ctrl->val = c->value;
+		break;
+	}
+	return 0;
+}
+
+/* Helper function: copy the new control value back to the caller */
+static int new_to_user(struct v4l2_ext_control *c,
+		       struct v4l2_ctrl *ctrl)
+{
+	u32 len;
+
+	switch (ctrl->type) {
+	case V4L2_CTRL_TYPE_STRING:
+		len = strlen(ctrl->string);
+		if (c->size < len + 1) {
+			c->size = ctrl->maximum + 1;
+			return -ENOSPC;
+		}
+		return copy_to_user(c->string, ctrl->string,
+						len + 1) ? -EFAULT : 0;
+	case V4L2_CTRL_TYPE_INTEGER64:
+		c->value64 = ctrl->val64;
+		break;
+	default:
+		c->value = ctrl->val;
+		break;
+	}
+	return 0;
+}
+
+/* Copy the new value to the current value. */
+static void new_to_cur(struct v4l2_ctrl *ctrl)
+{
+	if (ctrl == NULL)
+		return;
+	switch (ctrl->type) {
+	case V4L2_CTRL_TYPE_STRING:
+		/* strings are always 0-terminated */
+		strcpy(ctrl->cur.string, ctrl->string);
+		break;
+	case V4L2_CTRL_TYPE_INTEGER64:
+		ctrl->cur.val64 = ctrl->val64;
+		break;
+	default:
+		ctrl->cur.val = ctrl->val;
+		break;
+	}
+}
+
+/* Copy the current value to the new value */
+static void cur_to_new(struct v4l2_ctrl *ctrl)
+{
+	if (ctrl == NULL)
+		return;
+	switch (ctrl->type) {
+	case V4L2_CTRL_TYPE_STRING:
+		/* strings are always 0-terminated */
+		strcpy(ctrl->string, ctrl->cur.string);
+		break;
+	case V4L2_CTRL_TYPE_INTEGER64:
+		ctrl->val64 = ctrl->cur.val64;
+		break;
+	default:
+		ctrl->val = ctrl->cur.val;
+		break;
+	}
+}
+
+/* Return non-zero if one or more of the controls in the cluster has a new
+   value that differs from the current value. */
+static int cluster_changed(struct v4l2_ctrl *master)
+{
+	int diff = 0;
+	int i;
+
+	for (i = 0; !diff && i < master->ncontrols; i++) {
+		struct v4l2_ctrl *ctrl = master->cluster[i];
+
+		if (ctrl == NULL)
+			continue;
+		switch (ctrl->type) {
+		case V4L2_CTRL_TYPE_BUTTON:
+			/* Button controls are always 'different' */
+			return 1;
+		case V4L2_CTRL_TYPE_STRING:
+			/* strings are always 0-terminated */
+			diff = strcmp(ctrl->string, ctrl->cur.string);
+			break;
+		case V4L2_CTRL_TYPE_INTEGER64:
+			diff = ctrl->val64 != ctrl->cur.val64;
+			break;
+		default:
+			diff = ctrl->val != ctrl->cur.val;
+			break;
+		}
+	}
+	return diff;
+}
+
+/* Validate a new control */
+static int validate_new(struct v4l2_ctrl *ctrl)
+{
+	s32 val = ctrl->val;
+	char *s = ctrl->string;
+	u32 offset;
+	size_t len;
+
+	switch (ctrl->type) {
+	case V4L2_CTRL_TYPE_INTEGER:
+		/* Round towards the closest legal value */
+		val += ctrl->step / 2;
+		if (val < ctrl->minimum)
+			val = ctrl->minimum;
+		if (val > ctrl->maximum)
+			val = ctrl->maximum;
+		offset = val - ctrl->minimum;
+		offset = ctrl->step * (offset / ctrl->step);
+		val = ctrl->minimum + offset;
+		ctrl->val = val;
+		return 0;
+
+	case V4L2_CTRL_TYPE_BOOLEAN:
+		ctrl->val = !!ctrl->val;
+		return 0;
+
+	case V4L2_CTRL_TYPE_MENU:
+		if (val < ctrl->minimum || val > ctrl->maximum)
+			return -ERANGE;
+		if (ctrl->qmenu[val][0] == '\0' ||
+		    (ctrl->menu_skip_mask & (1 << val)))
+			return -EINVAL;
+		return 0;
+
+	case V4L2_CTRL_TYPE_BUTTON:
+	case V4L2_CTRL_TYPE_CTRL_CLASS:
+		ctrl->val64 = 0;
+		return 0;
+
+	case V4L2_CTRL_TYPE_INTEGER64:
+		return 0;
+
+	case V4L2_CTRL_TYPE_STRING:
+		len = strlen(s);
+		if (len < ctrl->minimum)
+			return -ERANGE;
+		if ((len - ctrl->minimum) % ctrl->step)
+			return -ERANGE;
+		return 0;
+
+	default:
+		return -EINVAL;
+	}
+}
+
+static inline u32 node2id(struct list_head *node)
+{
+	return list_entry(node, struct v4l2_ctrl_ref, node)->ctrl->id;
+}
+
+/* Set the handler's error code if it wasn't set earlier already */
+static inline int handler_set_err(struct v4l2_ctrl_handler *hdl, int err)
+{
+	if (hdl->error == 0)
+		hdl->error = err;
+	return err;
+}
+
+/* Initialize the handler */
+int v4l2_ctrl_handler_init(struct v4l2_ctrl_handler *hdl,
+			   unsigned nr_of_controls_hint)
+{
+	mutex_init(&hdl->lock);
+	INIT_LIST_HEAD(&hdl->ctrls);
+	INIT_LIST_HEAD(&hdl->ctrl_refs);
+	hdl->nr_of_buckets = 1 + nr_of_controls_hint / 8;
+	hdl->buckets = kzalloc(sizeof(hdl->buckets[0]) * hdl->nr_of_buckets,
+								GFP_KERNEL);
+	hdl->error = hdl->buckets ? 0 : -ENOMEM;
+	return hdl->error;
+}
+EXPORT_SYMBOL(v4l2_ctrl_handler_init);
+
+/* Free all controls and control refs */
+void v4l2_ctrl_handler_free(struct v4l2_ctrl_handler *hdl)
+{
+	struct v4l2_ctrl_ref *ref, *next_ref;
+	struct v4l2_ctrl *ctrl, *next_ctrl;
+
+	if (hdl == NULL || hdl->buckets == NULL)
+		return;
+
+	mutex_lock(&hdl->lock);
+	/* Free all nodes */
+	list_for_each_entry_safe(ref, next_ref, &hdl->ctrl_refs, node) {
+		list_del(&ref->node);
+		kfree(ref);
+	}
+	/* Free all controls owned by the handler */
+	list_for_each_entry_safe(ctrl, next_ctrl, &hdl->ctrls, node) {
+		list_del(&ctrl->node);
+		kfree(ctrl);
+	}
+	kfree(hdl->buckets);
+	hdl->buckets = NULL;
+	hdl->cached = NULL;
+	hdl->error = 0;
+	mutex_unlock(&hdl->lock);
+}
+EXPORT_SYMBOL(v4l2_ctrl_handler_free);
+
+/* For backwards compatibility: V4L2_CID_PRIVATE_BASE should no longer
+   be used except in G_CTRL, S_CTRL, QUERYCTRL and QUERYMENU when dealing
+   with applications that do not use the NEXT_CTRL flag.
+
+   We just find the n-th private user control. It's O(N), but that should not
+   be an issue in this particular case. */
+static struct v4l2_ctrl_ref *find_private_ref(
+		struct v4l2_ctrl_handler *hdl, u32 id)
+{
+	struct v4l2_ctrl_ref *ref;
+
+	id -= V4L2_CID_PRIVATE_BASE;
+	list_for_each_entry(ref, &hdl->ctrl_refs, node) {
+		/* Search for private user controls that are compatible with
+		   VIDIOC_G/S_CTRL. */
+		if (V4L2_CTRL_ID2CLASS(ref->ctrl->id) == V4L2_CTRL_CLASS_USER &&
+		    V4L2_CTRL_DRIVER_PRIV(ref->ctrl->id)) {
+			if (!type_is_int(ref->ctrl))
+				continue;
+			if (id == 0)
+				return ref;
+			id--;
+		}
+	}
+	return NULL;
+}
+
+/* Find a control with the given ID. */
+static struct v4l2_ctrl_ref *find_ref(struct v4l2_ctrl_handler *hdl, u32 id)
+{
+	struct v4l2_ctrl_ref *ref;
+	int bucket;
+
+	id &= V4L2_CTRL_ID_MASK;
+
+	/* Old-style private controls need special handling */
+	if (id >= V4L2_CID_PRIVATE_BASE)
+		return find_private_ref(hdl, id);
+	bucket = id % hdl->nr_of_buckets;
+
+	/* Simple optimization: cache the last control found */
+	if (hdl->cached && hdl->cached->ctrl->id == id)
+		return hdl->cached;
+
+	/* Not in cache, search the hash */
+	ref = hdl->buckets ? hdl->buckets[bucket] : NULL;
+	while (ref && ref->ctrl->id != id)
+		ref = ref->next;
+
+	if (ref)
+		hdl->cached = ref; /* cache it! */
+	return ref;
+}
+
+/* Find a control with the given ID. Take the handler's lock first. */
+static struct v4l2_ctrl_ref *find_ref_lock(
+		struct v4l2_ctrl_handler *hdl, u32 id)
+{
+	struct v4l2_ctrl_ref *ref = NULL;
+
+	if (hdl) {
+		mutex_lock(&hdl->lock);
+		ref = find_ref(hdl, id);
+		mutex_unlock(&hdl->lock);
+	}
+	return ref;
+}
+
+/* Find a control with the given ID. */
+struct v4l2_ctrl *v4l2_ctrl_find(struct v4l2_ctrl_handler *hdl, u32 id)
+{
+	struct v4l2_ctrl_ref *ref = find_ref_lock(hdl, id);
+
+	return ref ? ref->ctrl : NULL;
+}
+EXPORT_SYMBOL(v4l2_ctrl_find);
+
+/* Allocate a new v4l2_ctrl_ref and hook it into the handler. */
+static int handler_new_ref(struct v4l2_ctrl_handler *hdl,
+			   struct v4l2_ctrl *ctrl)
+{
+	struct v4l2_ctrl_ref *ref;
+	struct v4l2_ctrl_ref *new_ref;
+	u32 id = ctrl->id;
+	u32 class_ctrl = V4L2_CTRL_ID2CLASS(id) | 1;
+	int bucket = id % hdl->nr_of_buckets;	/* which bucket to use */
+
+	/* Automatically add the control class if it is not yet present. */
+	if (id != class_ctrl && find_ref_lock(hdl, class_ctrl) == NULL)
+		if (!v4l2_ctrl_new_std(hdl, NULL, class_ctrl, 0, 0, 0, 0))
+			return hdl->error;
+
+	if (hdl->error)
+		return hdl->error;
+
+	new_ref = kzalloc(sizeof(*new_ref), GFP_KERNEL);
+	if (!new_ref)
+		return handler_set_err(hdl, -ENOMEM);
+	new_ref->ctrl = ctrl;
+	if (ctrl->handler == hdl) {
+		/* By default each control starts in a cluster of its own.
+		   new_ref->ctrl is basically a cluster array with one
+		   element, so that's perfect to use as the cluster pointer.
+		   But only do this for the handler that owns the control. */
+		ctrl->cluster = &new_ref->ctrl;
+		ctrl->ncontrols = 1;
+	}
+
+	INIT_LIST_HEAD(&new_ref->node);
+
+	mutex_lock(&hdl->lock);
+
+	/* Add immediately at the end of the list if the list is empty, or if
+	   the last element in the list has a lower ID.
+	   This ensures that when elements are added in ascending order the
+	   insertion is an O(1) operation. */
+	if (list_empty(&hdl->ctrl_refs) || id > node2id(hdl->ctrl_refs.prev)) {
+		list_add_tail(&new_ref->node, &hdl->ctrl_refs);
+		goto insert_in_hash;
+	}
+
+	/* Find insert position in sorted list */
+	list_for_each_entry(ref, &hdl->ctrl_refs, node) {
+		if (ref->ctrl->id < id)
+			continue;
+		/* Don't add duplicates */
+		if (ref->ctrl->id == id) {
+			kfree(new_ref);
+			goto unlock;
+		}
+		list_add(&new_ref->node, ref->node.prev);
+		break;
+	}
+
+insert_in_hash:
+	/* Insert the control node in the hash */
+	new_ref->next = hdl->buckets[bucket];
+	hdl->buckets[bucket] = new_ref;
+
+unlock:
+	mutex_unlock(&hdl->lock);
+	return 0;
+}
+
+/* Add a new control */
+static struct v4l2_ctrl *v4l2_ctrl_new(struct v4l2_ctrl_handler *hdl,
+			const struct v4l2_ctrl_ops *ops,
+			u32 id, const char *name, enum v4l2_ctrl_type type,
+			s32 min, s32 max, u32 step, s32 def,
+			u32 flags, const char **qmenu, void *priv)
+{
+	struct v4l2_ctrl *ctrl;
+	unsigned sz_extra = 0;
+
+	if (hdl->error)
+		return NULL;
+
+	/* Sanity checks */
+	if (id == 0 || name == NULL || id >= V4L2_CID_PRIVATE_BASE ||
+	    def < min || def > max || max < min ||
+	    (type == V4L2_CTRL_TYPE_INTEGER && step == 0) ||
+	    (type == V4L2_CTRL_TYPE_MENU && qmenu == NULL) ||
+	    (type == V4L2_CTRL_TYPE_STRING && max == 0)) {
+		handler_set_err(hdl, -ERANGE);
+		return NULL;
+	}
+
+	if (type == V4L2_CTRL_TYPE_BUTTON)
+		flags |= V4L2_CTRL_FLAG_WRITE_ONLY;
+	else if (type == V4L2_CTRL_TYPE_CTRL_CLASS)
+		flags |= V4L2_CTRL_FLAG_READ_ONLY;
+	else if (type == V4L2_CTRL_TYPE_STRING)
+		sz_extra += 2 * (max + 1);
+
+	ctrl = kzalloc(sizeof(*ctrl) + sz_extra, GFP_KERNEL);
+	if (ctrl == NULL) {
+		handler_set_err(hdl, -ENOMEM);
+		return NULL;
+	}
+
+	INIT_LIST_HEAD(&ctrl->node);
+	ctrl->handler = hdl;
+	ctrl->ops = ops;
+	ctrl->id = id;
+	ctrl->name = name;
+	ctrl->type = type;
+	ctrl->flags = flags;
+	ctrl->minimum = min;
+	ctrl->maximum = max;
+	ctrl->step = step;
+	ctrl->qmenu = qmenu;
+	ctrl->priv = priv;
+	ctrl->cur.val = ctrl->val = ctrl->default_value = def;
+
+	if (ctrl->type == V4L2_CTRL_TYPE_STRING) {
+		ctrl->cur.string = (char *)&ctrl[1] + sz_extra - (max + 1);
+		ctrl->string = (char *)&ctrl[1] + sz_extra - 2 * (max + 1);
+		if (ctrl->minimum)
+			memset(ctrl->cur.string, ' ', ctrl->minimum);
+	}
+	if (handler_new_ref(hdl, ctrl)) {
+		kfree(ctrl);
+		return NULL;
+	}
+	mutex_lock(&hdl->lock);
+	list_add_tail(&ctrl->node, &hdl->ctrls);
+	mutex_unlock(&hdl->lock);
+	return ctrl;
+}
+
+struct v4l2_ctrl *v4l2_ctrl_new_custom(struct v4l2_ctrl_handler *hdl,
+			const struct v4l2_ctrl_config *cfg, void *priv)
+{
+	bool is_menu;
+	struct v4l2_ctrl *ctrl;
+	const char *name = cfg->name;
+	const char **qmenu = cfg->qmenu;
+	enum v4l2_ctrl_type type = cfg->type;
+	u32 flags = cfg->flags;
+	s32 min = cfg->min;
+	s32 max = cfg->max;
+	u32 step = cfg->step;
+	s32 def = cfg->def;
+
+	if (name == NULL)
+		v4l2_ctrl_fill(cfg->id, &name, &type, &min, &max, &step,
+								&def, &flags);
+
+	is_menu = (cfg->type == V4L2_CTRL_TYPE_MENU);
+	if (is_menu)
+		WARN_ON(step);
+	else
+		WARN_ON(cfg->menu_skip_mask);
+	if (is_menu && qmenu == NULL)
+		qmenu = v4l2_ctrl_get_menu(cfg->id);
+
+	ctrl = v4l2_ctrl_new(hdl, cfg->ops, cfg->id, name,
+			type, min, max,
+			is_menu ? cfg->menu_skip_mask : step,
+			def, flags, qmenu, priv);
+	if (ctrl) {
+		ctrl->is_private = cfg->is_private;
+		ctrl->is_volatile = cfg->is_volatile;
+	}
+	return ctrl;
+}
+EXPORT_SYMBOL(v4l2_ctrl_new_custom);
+
+/* Helper function for standard non-menu controls */
+struct v4l2_ctrl *v4l2_ctrl_new_std(struct v4l2_ctrl_handler *hdl,
+			const struct v4l2_ctrl_ops *ops,
+			u32 id, s32 min, s32 max, u32 step, s32 def)
+{
+	const char *name;
+	enum v4l2_ctrl_type type;
+	u32 flags;
+
+	v4l2_ctrl_fill(id, &name, &type, &min, &max, &step, &def, &flags);
+	if (type == V4L2_CTRL_TYPE_MENU) {
+		handler_set_err(hdl, -EINVAL);
+		return NULL;
+	}
+	return v4l2_ctrl_new(hdl, ops, id, name, type,
+				    min, max, step, def, flags, NULL, NULL);
+}
+EXPORT_SYMBOL(v4l2_ctrl_new_std);
+
+/* Helper function for standard menu controls */
+struct v4l2_ctrl *v4l2_ctrl_new_std_menu(struct v4l2_ctrl_handler *hdl,
+			const struct v4l2_ctrl_ops *ops,
+			u32 id, s32 max, s32 mask, s32 def)
+{
+	const char **qmenu = v4l2_ctrl_get_menu(id);
+	const char *name;
+	enum v4l2_ctrl_type type;
+	s32 min;
+	s32 step;
+	u32 flags;
+
+	v4l2_ctrl_fill(id, &name, &type, &min, &max, &step, &def, &flags);
+	if (type != V4L2_CTRL_TYPE_MENU) {
+		handler_set_err(hdl, -EINVAL);
+		return NULL;
+	}
+	return v4l2_ctrl_new(hdl, ops, id, name, type,
+				    0, max, mask, def, flags, qmenu, NULL);
+}
+EXPORT_SYMBOL(v4l2_ctrl_new_std_menu);
+
+/* Add a control from another handler to this handler */
+struct v4l2_ctrl *v4l2_ctrl_add_ctrl(struct v4l2_ctrl_handler *hdl,
+					  struct v4l2_ctrl *ctrl)
+{
+	if (hdl == NULL || hdl->error)
+		return NULL;
+	if (ctrl == NULL) {
+		handler_set_err(hdl, -EINVAL);
+		return NULL;
+	}
+	if (ctrl->handler == hdl)
+		return ctrl;
+	return handler_new_ref(hdl, ctrl) ? NULL : ctrl;
+}
+EXPORT_SYMBOL(v4l2_ctrl_add_ctrl);
+
+/* Add the controls from another handler to our own. */
+int v4l2_ctrl_add_handler(struct v4l2_ctrl_handler *hdl,
+			  struct v4l2_ctrl_handler *add)
+{
+	struct v4l2_ctrl *ctrl;
+	int ret = 0;
+
+	/* Do nothing if either handler is NULL or if they are the same */
+	if (!hdl || !add || hdl == add)
+		return 0;
+	if (hdl->error)
+		return hdl->error;
+	mutex_lock(&add->lock);
+	list_for_each_entry(ctrl, &add->ctrls, node) {
+		/* Skip handler-private controls. */
+		if (ctrl->is_private)
+			continue;
+		ret = handler_new_ref(hdl, ctrl);
+		if (ret)
+			break;
+	}
+	mutex_unlock(&add->lock);
+	return ret;
+}
+EXPORT_SYMBOL(v4l2_ctrl_add_handler);
+
+/* Cluster controls */
+void v4l2_ctrl_cluster(unsigned ncontrols, struct v4l2_ctrl **controls)
+{
+	int i;
+
+	/* The first control is the master control and it must not be NULL */
+	BUG_ON(controls[0] == NULL);
+
+	for (i = 0; i < ncontrols; i++) {
+		if (controls[i]) {
+			controls[i]->cluster = controls;
+			controls[i]->ncontrols = ncontrols;
+		}
+	}
+}
+EXPORT_SYMBOL(v4l2_ctrl_cluster);
+
+/* Activate/deactivate a control. */
+void v4l2_ctrl_activate(struct v4l2_ctrl *ctrl, bool active)
+{
+	if (ctrl == NULL)
+		return;
+
+	if (!active)
+		/* set V4L2_CTRL_FLAG_INACTIVE */
+		set_bit(4, &ctrl->flags);
+	else
+		/* clear V4L2_CTRL_FLAG_INACTIVE */
+		clear_bit(4, &ctrl->flags);
+}
+EXPORT_SYMBOL(v4l2_ctrl_activate);
+
+/* Grab/ungrab a control.
+   Typically used when streaming starts and you want to grab controls,
+   preventing the user from changing them.
+
+   Just call this and the framework will block any attempts to change
+   these controls. */
+void v4l2_ctrl_grab(struct v4l2_ctrl *ctrl, bool grabbed)
+{
+	if (ctrl == NULL)
+		return;
+
+	if (grabbed)
+		/* set V4L2_CTRL_FLAG_GRABBED */
+		set_bit(1, &ctrl->flags);
+	else
+		/* clear V4L2_CTRL_FLAG_GRABBED */
+		clear_bit(1, &ctrl->flags);
+}
+EXPORT_SYMBOL(v4l2_ctrl_grab);
+
+/* Log the control name and value */
+static void log_ctrl(const struct v4l2_ctrl *ctrl,
+		     const char *prefix, const char *colon)
+{
+	int fl_inact = ctrl->flags & V4L2_CTRL_FLAG_INACTIVE;
+	int fl_grabbed = ctrl->flags & V4L2_CTRL_FLAG_GRABBED;
+
+	if (ctrl->flags & (V4L2_CTRL_FLAG_DISABLED | V4L2_CTRL_FLAG_WRITE_ONLY))
+		return;
+	if (ctrl->type == V4L2_CTRL_TYPE_CTRL_CLASS)
+		return;
+
+	printk(KERN_INFO "%s%s%s: ", prefix, colon, ctrl->name);
+
+	switch (ctrl->type) {
+	case V4L2_CTRL_TYPE_INTEGER:
+		printk(KERN_CONT "%d", ctrl->cur.val);
+		break;
+	case V4L2_CTRL_TYPE_BOOLEAN:
+		printk(KERN_CONT "%s", ctrl->cur.val ? "true" : "false");
+		break;
+	case V4L2_CTRL_TYPE_MENU:
+		printk(KERN_CONT "%s", ctrl->qmenu[ctrl->cur.val]);
+		break;
+	case V4L2_CTRL_TYPE_INTEGER64:
+		printk(KERN_CONT "%lld", ctrl->cur.val64);
+		break;
+	case V4L2_CTRL_TYPE_STRING:
+		printk(KERN_CONT "%s", ctrl->cur.string);
+		break;
+	default:
+		printk(KERN_CONT "unknown type %d", ctrl->type);
+		break;
+	}
+	if (fl_inact && fl_grabbed)
+		printk(KERN_CONT " (inactive, grabbed)\n");
+	else if (fl_inact)
+		printk(KERN_CONT " (inactive)\n");
+	else if (fl_grabbed)
+		printk(KERN_CONT " (grabbed)\n");
+	else
+		printk(KERN_CONT "\n");
+}
+
+/* Log all controls owned by the handler */
+void v4l2_ctrl_handler_log_status(struct v4l2_ctrl_handler *hdl,
+				  const char *prefix)
+{
+	struct v4l2_ctrl *ctrl;
+	const char *colon = "";
+	int len;
+
+	if (hdl == NULL)
+		return;
+	if (prefix == NULL)
+		prefix = "";
+	len = strlen(prefix);
+	if (len && prefix[len - 1] != ' ')
+		colon = ": ";
+	mutex_lock(&hdl->lock);
+	list_for_each_entry(ctrl, &hdl->ctrls, node)
+		if (!(ctrl->flags & V4L2_CTRL_FLAG_DISABLED))
+			log_ctrl(ctrl, prefix, colon);
+	mutex_unlock(&hdl->lock);
+}
+EXPORT_SYMBOL(v4l2_ctrl_handler_log_status);
+
+/* Call s_ctrl for all controls owned by the handler */
+int v4l2_ctrl_handler_setup(struct v4l2_ctrl_handler *hdl)
+{
+	struct v4l2_ctrl *ctrl;
+	int ret = 0;
+
+	if (hdl == NULL)
+		return 0;
+	mutex_lock(&hdl->lock);
+	list_for_each_entry(ctrl, &hdl->ctrls, node)
+		ctrl->done = false;
+
+	list_for_each_entry(ctrl, &hdl->ctrls, node) {
+		struct v4l2_ctrl *master = ctrl->cluster[0];
+		int i;
+
+		/* Skip if this control was already handled by a cluster. */
+		if (ctrl->done)
+			continue;
+
+		for (i = 0; i < master->ncontrols; i++)
+			cur_to_new(master->cluster[i]);
+
+		/* Skip button controls and read-only controls. */
+		if (ctrl->type == V4L2_CTRL_TYPE_BUTTON ||
+		    (ctrl->flags & V4L2_CTRL_FLAG_READ_ONLY))
+			continue;
+		ret = master->ops->s_ctrl(master);
+		if (ret)
+			break;
+		for (i = 0; i < master->ncontrols; i++)
+			if (master->cluster[i])
+				master->cluster[i]->done = true;
+	}
+	mutex_unlock(&hdl->lock);
+	return ret;
+}
+EXPORT_SYMBOL(v4l2_ctrl_handler_setup);
+
+/* Implement VIDIOC_QUERYCTRL */
+int v4l2_queryctrl(struct v4l2_ctrl_handler *hdl, struct v4l2_queryctrl *qc)
+{
+	u32 id = qc->id & V4L2_CTRL_ID_MASK;
+	struct v4l2_ctrl_ref *ref;
+	struct v4l2_ctrl *ctrl;
+
+	if (hdl == NULL)
+		return -EINVAL;
+
+	mutex_lock(&hdl->lock);
+
+	/* Try to find it */
+	ref = find_ref(hdl, id);
+
+	if ((qc->id & V4L2_CTRL_FLAG_NEXT_CTRL) && !list_empty(&hdl->ctrl_refs)) {
+		/* Find the next control with ID > qc->id */
+
+		/* Did we reach the end of the control list? */
+		if (id >= node2id(hdl->ctrl_refs.prev)) {
+			ref = NULL; /* Yes, so there is no next control */
+		} else if (ref) {
+			/* We found a control with the given ID, so just get
+			   the next one in the list. */
+			ref = list_entry(ref->node.next, typeof(*ref), node);
+		} else {
+			/* No control with the given ID exists, so start
+			   searching for the next largest ID. We know there
+			   is one, otherwise the first 'if' above would have
+			   been true. */
+			list_for_each_entry(ref, &hdl->ctrl_refs, node)
+				if (id < ref->ctrl->id)
+					break;
+		}
+	}
+	mutex_unlock(&hdl->lock);
+	if (!ref)
+		return -EINVAL;
+
+	ctrl = ref->ctrl;
+	memset(qc, 0, sizeof(*qc));
+	qc->id = ctrl->id;
+	strlcpy(qc->name, ctrl->name, sizeof(qc->name));
+	qc->minimum = ctrl->minimum;
+	qc->maximum = ctrl->maximum;
+	qc->default_value = ctrl->default_value;
+	if (qc->type == V4L2_CTRL_TYPE_MENU)
+		qc->step = 1;
+	else
+		qc->step = ctrl->step;
+	qc->flags = ctrl->flags;
+	qc->type = ctrl->type;
+	return 0;
+}
+EXPORT_SYMBOL(v4l2_queryctrl);
+
+int v4l2_subdev_queryctrl(struct v4l2_subdev *sd, struct v4l2_queryctrl *qc)
+{
+	return v4l2_queryctrl(sd->ctrl_handler, qc);
+}
+EXPORT_SYMBOL(v4l2_subdev_queryctrl);
+
+/* Implement VIDIOC_QUERYMENU */
+int v4l2_querymenu(struct v4l2_ctrl_handler *hdl, struct v4l2_querymenu *qm)
+{
+	struct v4l2_ctrl *ctrl;
+	u32 i = qm->index;
+
+	ctrl = v4l2_ctrl_find(hdl, qm->id);
+	if (!ctrl)
+		return -EINVAL;
+
+	qm->reserved = 0;
+	/* Sanity checks */
+	if (ctrl->qmenu == NULL ||
+	    i < ctrl->minimum || i > ctrl->maximum)
+		return -EINVAL;
+	/* Use mask to see if this menu item should be skipped */
+	if (ctrl->menu_skip_mask & (1 << i))
+		return -EINVAL;
+	/* Empty menu items should also be skipped */
+	if (ctrl->qmenu[i] == NULL || ctrl->qmenu[i][0] == '\0')
+		return -EINVAL;
+	strlcpy(qm->name, ctrl->qmenu[i], sizeof(qm->name));
+	return 0;
+}
+EXPORT_SYMBOL(v4l2_querymenu);
+
+int v4l2_subdev_querymenu(struct v4l2_subdev *sd, struct v4l2_querymenu *qm)
+{
+	return v4l2_querymenu(sd->ctrl_handler, qm);
+}
+EXPORT_SYMBOL(v4l2_subdev_querymenu);
+
+
+
+/* Some general notes on the atomic requirements of VIDIOC_G/TRY/S_EXT_CTRLS:
+
+   It is not a fully atomic operation, just best-effort only. After all, if
+   multiple controls have to be set through multiple i2c writes (for example)
+   then some initial writes may succeed while others fail. Thus leaving the
+   system in an inconsistent state. The question is how much effort you are
+   willing to spend on trying to make something atomic that really isn't.
+
+   From the point of view of an application the main requirement is that
+   when you call VIDIOC_S_EXT_CTRLS and some values are invalid then an
+   error should be returned without actually affecting any controls.
+
+   If all the values are correct, then it is acceptable to just give up
+   in case of low-level errors.
+
+   It is important though that the application can tell when only a partial
+   configuration was done. The way we do that is through the error_idx field
+   of struct v4l2_ext_controls: if that is equal to the count field then no
+   controls were affected. Otherwise all controls before that index were
+   successful in performing their 'get' or 'set' operation, the control at
+   the given index failed, and you don't know what happened with the controls
+   after the failed one. Since if they were part of a control cluster they
+   could have been successfully processed (if a cluster member was encountered
+   at index < error_idx), they could have failed (if a cluster member was at
+   error_idx), or they may not have been processed yet (if the first cluster
+   member appeared after error_idx).
+
+   It is all fairly theoretical, though. In practice all you can do is to
+   bail out. If error_idx == count, then it is an application bug. If
+   error_idx < count then it is only an application bug if the error code was
+   EBUSY. That usually means that something started streaming just when you
+   tried to set the controls. In all other cases it is a driver/hardware
+   problem and all you can do is to retry or bail out.
+
+   Note that these rules do not apply to VIDIOC_TRY_EXT_CTRLS: since that
+   never modifies controls the error_idx is just set to whatever control
+   has an invalid value.
+ */
+
+/* Prepare for the extended g/s/try functions.
+   Find the controls in the control array and do some basic checks. */
+static int prepare_ext_ctrls(struct v4l2_ctrl_handler *hdl,
+			     struct v4l2_ext_controls *cs,
+			     struct ctrl_helper *helpers,
+			     bool try)
+{
+	u32 i;
+
+	for (i = 0; i < cs->count; i++) {
+		struct v4l2_ext_control *c = &cs->controls[i];
+		struct v4l2_ctrl *ctrl;
+		u32 id = c->id & V4L2_CTRL_ID_MASK;
+
+		if (try)
+			cs->error_idx = i;
+
+		if (cs->ctrl_class && V4L2_CTRL_ID2CLASS(id) != cs->ctrl_class)
+			return -EINVAL;
+
+		/* Old-style private controls are not allowed for
+		   extended controls */
+		if (id >= V4L2_CID_PRIVATE_BASE)
+			return -EINVAL;
+		ctrl = v4l2_ctrl_find(hdl, id);
+		if (ctrl == NULL)
+			return -EINVAL;
+		if (ctrl->flags & V4L2_CTRL_FLAG_DISABLED)
+			return -EINVAL;
+
+		helpers[i].ctrl = ctrl;
+		helpers[i].handled = false;
+	}
+	return 0;
+}
+
+typedef int (*cluster_func)(struct v4l2_ext_control *c,
+			    struct v4l2_ctrl *ctrl);
+
+/* Walk over all controls in v4l2_ext_controls belonging to the same cluster
+   and call the provided function. */
+static int cluster_walk(unsigned from,
+			struct v4l2_ext_controls *cs,
+			struct ctrl_helper *helpers,
+			cluster_func f)
+{
+	struct v4l2_ctrl **cluster = helpers[from].ctrl->cluster;
+	int ret = 0;
+	int i;
+
+	/* Find any controls from the same cluster and call the function */
+	for (i = from; !ret && i < cs->count; i++) {
+		struct v4l2_ctrl *ctrl = helpers[i].ctrl;
+
+		if (!helpers[i].handled && ctrl->cluster == cluster)
+			ret = f(&cs->controls[i], ctrl);
+	}
+	return ret;
+}
+
+static void cluster_done(unsigned from,
+			 struct v4l2_ext_controls *cs,
+			 struct ctrl_helper *helpers)
+{
+	struct v4l2_ctrl **cluster = helpers[from].ctrl->cluster;
+	int i;
+
+	/* Find any controls from the same cluster and mark them as handled */
+	for (i = from; i < cs->count; i++)
+		if (helpers[i].ctrl->cluster == cluster)
+			helpers[i].handled = true;
+}
+
+/* Handles the corner case where cs->count == 0. It checks whether the
+   specified control class exists. If that class ID is 0, then it checks
+   whether there are any controls at all. */
+static int class_check(struct v4l2_ctrl_handler *hdl, u32 ctrl_class)
+{
+	if (ctrl_class == 0)
+		return list_empty(&hdl->ctrl_refs) ? -EINVAL : 0;
+	return find_ref_lock(hdl, ctrl_class | 1) ? 0 : -EINVAL;
+}
+
+
+
+/* Get extended controls. Allocates the helpers array if needed. */
+int v4l2_g_ext_ctrls(struct v4l2_ctrl_handler *hdl, struct v4l2_ext_controls *cs)
+{
+	struct ctrl_helper helper[4];
+	struct ctrl_helper *helpers = helper;
+	int ret;
+	int i;
+
+	cs->error_idx = cs->count;
+	cs->ctrl_class = V4L2_CTRL_ID2CLASS(cs->ctrl_class);
+
+	if (hdl == NULL)
+		return -EINVAL;
+
+	if (cs->count == 0)
+		return class_check(hdl, cs->ctrl_class);
+
+	if (cs->count > ARRAY_SIZE(helper)) {
+		helpers = kmalloc(sizeof(helper[0]) * cs->count, GFP_KERNEL);
+		if (helpers == NULL)
+			return -ENOMEM;
+	}
+
+	ret = prepare_ext_ctrls(hdl, cs, helpers, false);
+
+	for (i = 0; !ret && i < cs->count; i++)
+		if (helpers[i].ctrl->flags & V4L2_CTRL_FLAG_WRITE_ONLY)
+			ret = -EACCES;
+
+	for (i = 0; !ret && i < cs->count; i++) {
+		struct v4l2_ctrl *ctrl = helpers[i].ctrl;
+		struct v4l2_ctrl *master = ctrl->cluster[0];
+
+		if (helpers[i].handled)
+			continue;
+
+		cs->error_idx = i;
+
+		v4l2_ctrl_lock(master);
+		/* g_volatile_ctrl will update the current control values */
+		if (ctrl->is_volatile && master->ops->g_volatile_ctrl)
+			ret = master->ops->g_volatile_ctrl(master);
+		/* If OK, then copy the current control values to the caller */
+		if (!ret)
+			ret = cluster_walk(i, cs, helpers, cur_to_user);
+		v4l2_ctrl_unlock(master);
+		cluster_done(i, cs, helpers);
+	}
+
+	if (cs->count > ARRAY_SIZE(helper))
+		kfree(helpers);
+	return ret;
+}
+EXPORT_SYMBOL(v4l2_g_ext_ctrls);
+
+int v4l2_subdev_g_ext_ctrls(struct v4l2_subdev *sd, struct v4l2_ext_controls *cs)
+{
+	return v4l2_g_ext_ctrls(sd->ctrl_handler, cs);
+}
+EXPORT_SYMBOL(v4l2_subdev_g_ext_ctrls);
+
+/* Helper function to get a single control */
+static int get_ctrl(struct v4l2_ctrl *ctrl, s32 *val)
+{
+	struct v4l2_ctrl *master = ctrl->cluster[0];
+	int ret = 0;
+
+	if (ctrl->flags & V4L2_CTRL_FLAG_WRITE_ONLY)
+		return -EACCES;
+
+	v4l2_ctrl_lock(master);
+	/* g_volatile_ctrl will update the current control values */
+	if (ctrl->is_volatile && master->ops->g_volatile_ctrl)
+		ret = master->ops->g_volatile_ctrl(master);
+	*val = ctrl->cur.val;
+	v4l2_ctrl_unlock(master);
+	return ret;
+}
+
+int v4l2_g_ctrl(struct v4l2_ctrl_handler *hdl, struct v4l2_control *control)
+{
+	struct v4l2_ctrl *ctrl = v4l2_ctrl_find(hdl, control->id);
+
+	if (ctrl == NULL || !type_is_int(ctrl))
+		return -EINVAL;
+	return get_ctrl(ctrl, &control->value);
+}
+EXPORT_SYMBOL(v4l2_g_ctrl);
+
+int v4l2_subdev_g_ctrl(struct v4l2_subdev *sd, struct v4l2_control *control)
+{
+	return v4l2_g_ctrl(sd->ctrl_handler, control);
+}
+EXPORT_SYMBOL(v4l2_subdev_g_ctrl);
+
+s32 v4l2_ctrl_g_ctrl(struct v4l2_ctrl *ctrl)
+{
+	s32 val = 0;
+
+	/* It's a driver bug if this happens. */
+	WARN_ON(!type_is_int(ctrl));
+	get_ctrl(ctrl, &val);
+	return val;
+}
+EXPORT_SYMBOL(v4l2_ctrl_g_ctrl);
+
+
+/* Core function that calls try/s_ctrl and ensures that the new value is
+   copied to the current value on a set.
+   Must be called with ctrl->handler->lock held. */
+static int try_or_set_control_cluster(struct v4l2_ctrl *master, bool set)
+{
+	bool try = !set;
+	int ret = 0;
+	int i;
+
+	/* Go through the cluster and either validate the new value or
+	   (if no new value was set), copy the current value to the new
+	   value, ensuring a consistent view for the control ops when
+	   called. */
+	for (i = 0; !ret && i < master->ncontrols; i++) {
+		struct v4l2_ctrl *ctrl = master->cluster[i];
+
+		if (ctrl == NULL)
+			continue;
+
+		if (ctrl->has_new) {
+			/* Double check this: it may have changed since the
+			   last check in try_or_set_ext_ctrls(). */
+			if (set && (ctrl->flags & V4L2_CTRL_FLAG_GRABBED))
+				return -EBUSY;
+
+			/* Validate if required */
+			if (!set)
+				ret = validate_new(ctrl);
+			continue;
+		}
+		/* No new value was set, so copy the current and force
+		   a call to try_ctrl later, since the values for the cluster
+		   may now have changed and the end result might be invalid. */
+		try = true;
+		cur_to_new(ctrl);
+	}
+
+	/* For larger clusters you have to call try_ctrl again to
+	   verify that the controls are still valid after the
+	   'cur_to_new' above. */
+	if (!ret && master->ops->try_ctrl && try)
+		ret = master->ops->try_ctrl(master);
+
+	/* Don't set if there is no change */
+	if (!ret && set && cluster_changed(master)) {
+		ret = master->ops->s_ctrl(master);
+		/* If OK, then make the new values permanent. */
+		if (!ret)
+			for (i = 0; i < master->ncontrols; i++)
+				new_to_cur(master->cluster[i]);
+	}
+	return ret;
+}
+
+/* Try or set controls. */
+static int try_or_set_ext_ctrls(struct v4l2_ctrl_handler *hdl,
+				struct v4l2_ext_controls *cs,
+				struct ctrl_helper *helpers,
+				bool set)
+{
+	unsigned i, j;
+	int ret = 0;
+
+	cs->error_idx = cs->count;
+	for (i = 0; i < cs->count; i++) {
+		struct v4l2_ctrl *ctrl = helpers[i].ctrl;
+
+		if (!set)
+			cs->error_idx = i;
+
+		if (ctrl->flags & V4L2_CTRL_FLAG_READ_ONLY)
+			return -EACCES;
+		/* This test is also done in try_set_control_cluster() which
+		   is called in atomic context, so that has the final say,
+		   but it makes sense to do an up-front check as well. Once
+		   an error occurs in try_set_control_cluster() some other
+		   controls may have been set already and we want to do a
+		   best-effort to avoid that. */
+		if (set && (ctrl->flags & V4L2_CTRL_FLAG_GRABBED))
+			return -EBUSY;
+	}
+
+	for (i = 0; !ret && i < cs->count; i++) {
+		struct v4l2_ctrl *ctrl = helpers[i].ctrl;
+		struct v4l2_ctrl *master = ctrl->cluster[0];
+
+		cs->error_idx = i;
+
+		if (helpers[i].handled)
+			continue;
+
+		v4l2_ctrl_lock(ctrl);
+
+		/* Reset the 'has_new' flags of the cluster */
+		for (j = 0; j < master->ncontrols; j++)
+			if (master->cluster[j])
+				master->cluster[j]->has_new = 0;
+
+		/* Copy the new caller-supplied control values.
+		   user_to_new() sets 'has_new' to 1. */
+		ret = cluster_walk(i, cs, helpers, user_to_new);
+
+		if (!ret)
+			ret = try_or_set_control_cluster(master, set);
+
+		/* Copy the new values back to userspace. */
+		if (!ret)
+			ret = cluster_walk(i, cs, helpers, new_to_user);
+
+		v4l2_ctrl_unlock(ctrl);
+		cluster_done(i, cs, helpers);
+	}
+	return ret;
+}
+
+/* Try or try-and-set controls */
+static int try_set_ext_ctrls(struct v4l2_ctrl_handler *hdl,
+			     struct v4l2_ext_controls *cs,
+			     bool set)
+{
+	struct ctrl_helper helper[4];
+	struct ctrl_helper *helpers = helper;
+	int ret;
+	int i;
+
+	cs->error_idx = cs->count;
+	cs->ctrl_class = V4L2_CTRL_ID2CLASS(cs->ctrl_class);
+
+	if (hdl == NULL)
+		return -EINVAL;
+
+	if (cs->count == 0)
+		return class_check(hdl, cs->ctrl_class);
+
+	if (cs->count > ARRAY_SIZE(helper)) {
+		helpers = kmalloc(sizeof(helper[0]) * cs->count, GFP_KERNEL);
+		if (!helpers)
+			return -ENOMEM;
+	}
+	ret = prepare_ext_ctrls(hdl, cs, helpers, !set);
+	if (ret)
+		goto free;
+
+	/* First 'try' all controls and abort on error */
+	ret = try_or_set_ext_ctrls(hdl, cs, helpers, false);
+	/* If this is a 'set' operation and the initial 'try' failed,
+	   then set error_idx to count to tell the application that no
+	   controls changed value yet. */
+	if (set)
+		cs->error_idx = cs->count;
+	if (!ret && set) {
+		/* Reset 'handled' state */
+		for (i = 0; i < cs->count; i++)
+			helpers[i].handled = false;
+		ret = try_or_set_ext_ctrls(hdl, cs, helpers, true);
+	}
+
+free:
+	if (cs->count > ARRAY_SIZE(helper))
+		kfree(helpers);
+	return ret;
+}
+
+int v4l2_try_ext_ctrls(struct v4l2_ctrl_handler *hdl, struct v4l2_ext_controls *cs)
+{
+	return try_set_ext_ctrls(hdl, cs, false);
+}
+EXPORT_SYMBOL(v4l2_try_ext_ctrls);
+
+int v4l2_s_ext_ctrls(struct v4l2_ctrl_handler *hdl, struct v4l2_ext_controls *cs)
+{
+	return try_set_ext_ctrls(hdl, cs, true);
+}
+EXPORT_SYMBOL(v4l2_s_ext_ctrls);
+
+int v4l2_subdev_try_ext_ctrls(struct v4l2_subdev *sd, struct v4l2_ext_controls *cs)
+{
+	return try_set_ext_ctrls(sd->ctrl_handler, cs, false);
+}
+EXPORT_SYMBOL(v4l2_subdev_try_ext_ctrls);
+
+int v4l2_subdev_s_ext_ctrls(struct v4l2_subdev *sd, struct v4l2_ext_controls *cs)
+{
+	return try_set_ext_ctrls(sd->ctrl_handler, cs, true);
+}
+EXPORT_SYMBOL(v4l2_subdev_s_ext_ctrls);
+
+/* Helper function for VIDIOC_S_CTRL compatibility */
+static int set_ctrl(struct v4l2_ctrl *ctrl, s32 *val)
+{
+	struct v4l2_ctrl *master = ctrl->cluster[0];
+	int ret;
+	int i;
+
+	v4l2_ctrl_lock(ctrl);
+
+	/* Reset the 'has_new' flags of the cluster */
+	for (i = 0; i < master->ncontrols; i++)
+		if (master->cluster[i])
+			master->cluster[i]->has_new = 0;
+
+	ctrl->val = *val;
+	ctrl->has_new = 1;
+	ret = try_or_set_control_cluster(master, false);
+	if (!ret)
+		ret = try_or_set_control_cluster(master, true);
+	*val = ctrl->cur.val;
+	v4l2_ctrl_unlock(ctrl);
+	return ret;
+}
+
+int v4l2_s_ctrl(struct v4l2_ctrl_handler *hdl, struct v4l2_control *control)
+{
+	struct v4l2_ctrl *ctrl = v4l2_ctrl_find(hdl, control->id);
+
+	if (ctrl == NULL || !type_is_int(ctrl))
+		return -EINVAL;
+
+	return set_ctrl(ctrl, &control->value);
+}
+EXPORT_SYMBOL(v4l2_s_ctrl);
+
+int v4l2_subdev_s_ctrl(struct v4l2_subdev *sd, struct v4l2_control *control)
+{
+	return v4l2_s_ctrl(sd->ctrl_handler, control);
+}
+EXPORT_SYMBOL(v4l2_subdev_s_ctrl);
+
+int v4l2_ctrl_s_ctrl(struct v4l2_ctrl *ctrl, s32 val)
+{
+	/* It's a driver bug if this happens. */
+	WARN_ON(!type_is_int(ctrl));
+	return set_ctrl(ctrl, &val);
+}
+EXPORT_SYMBOL(v4l2_ctrl_s_ctrl);

drivers/media/video/v4l2-dev.c

@@ -428,8 +428,12 @@ static int __video_register_device(struct video_device *vdev, int type, int nr,
 
 	vdev->vfl_type = type;
 	vdev->cdev = NULL;
-	if (vdev->v4l2_dev && vdev->v4l2_dev->dev)
-		vdev->parent = vdev->v4l2_dev->dev;
+	if (vdev->v4l2_dev) {
+		if (vdev->v4l2_dev->dev)
+			vdev->parent = vdev->v4l2_dev->dev;
+		if (vdev->ctrl_handler == NULL)
+			vdev->ctrl_handler = vdev->v4l2_dev->ctrl_handler;
+	}
 
 	/* Part 2: find a free minor, device node number and device index. */
 #ifdef CONFIG_VIDEO_FIXED_MINOR_RANGES

drivers/media/video/v4l2-device.c

@@ -26,6 +26,7 @@
 #endif
 #include <linux/videodev2.h>
 #include <media/v4l2-device.h>
+#include <media/v4l2-ctrls.h>
 
 int v4l2_device_register(struct device *dev, struct v4l2_device *v4l2_dev)
 {
@@ -115,6 +116,8 @@ EXPORT_SYMBOL_GPL(v4l2_device_unregister);
 int v4l2_device_register_subdev(struct v4l2_device *v4l2_dev,
 						struct v4l2_subdev *sd)
 {
+	int err;
+
 	/* Check for valid input */
 	if (v4l2_dev == NULL || sd == NULL || !sd->name[0])
 		return -EINVAL;
@@ -122,6 +125,10 @@ int v4l2_device_register_subdev(struct v4l2_device *v4l2_dev,
 	WARN_ON(sd->v4l2_dev != NULL);
 	if (!try_module_get(sd->owner))
 		return -ENODEV;
+	/* This just returns 0 if either of the two args is NULL */
+	err = v4l2_ctrl_add_handler(v4l2_dev->ctrl_handler, sd->ctrl_handler);
+	if (err)
+		return err;
 	sd->v4l2_dev = v4l2_dev;
 	spin_lock(&v4l2_dev->lock);
 	list_add_tail(&sd->list, &v4l2_dev->subdevs);

drivers/media/video/v4l2-ioctl.c

@@ -26,6 +26,7 @@
 #endif
 #include <media/v4l2-common.h>
 #include <media/v4l2-ioctl.h>
+#include <media/v4l2-ctrls.h>
 #include <media/v4l2-fh.h>
 #include <media/v4l2-event.h>
 #include <media/v4l2-chip-ident.h>
@@ -1259,9 +1260,12 @@ static long __video_do_ioctl(struct file *file,
 	{
 		struct v4l2_queryctrl *p = arg;
 
-		if (!ops->vidioc_queryctrl)
+		if (vfd->ctrl_handler)
+			ret = v4l2_queryctrl(vfd->ctrl_handler, p);
+		else if (ops->vidioc_queryctrl)
+			ret = ops->vidioc_queryctrl(file, fh, p);
+		else
 			break;
-		ret = ops->vidioc_queryctrl(file, fh, p);
 		if (!ret)
 			dbgarg(cmd, "id=0x%x, type=%d, name=%s, min/max=%d/%d, "
 					"step=%d, default=%d, flags=0x%08x\n",
@@ -1276,7 +1280,9 @@ static long __video_do_ioctl(struct file *file,
 	{
 		struct v4l2_control *p = arg;
 
-		if (ops->vidioc_g_ctrl)
+		if (vfd->ctrl_handler)
+			ret = v4l2_g_ctrl(vfd->ctrl_handler, p);
+		else if (ops->vidioc_g_ctrl)
 			ret = ops->vidioc_g_ctrl(file, fh, p);
 		else if (ops->vidioc_g_ext_ctrls) {
 			struct v4l2_ext_controls ctrls;
@@ -1306,11 +1312,16 @@ static long __video_do_ioctl(struct file *file,
 		struct v4l2_ext_controls ctrls;
 		struct v4l2_ext_control ctrl;
 
-		if (!ops->vidioc_s_ctrl && !ops->vidioc_s_ext_ctrls)
+		if (!vfd->ctrl_handler &&
+			!ops->vidioc_s_ctrl && !ops->vidioc_s_ext_ctrls)
 			break;
 
 		dbgarg(cmd, "id=0x%x, value=%d\n", p->id, p->value);
 
+		if (vfd->ctrl_handler) {
+			ret = v4l2_s_ctrl(vfd->ctrl_handler, p);
+			break;
+		}
 		if (ops->vidioc_s_ctrl) {
 			ret = ops->vidioc_s_ctrl(file, fh, p);
 			break;
@@ -1332,10 +1343,12 @@ static long __video_do_ioctl(struct file *file,
 		struct v4l2_ext_controls *p = arg;
 
 		p->error_idx = p->count;
-		if (!ops->vidioc_g_ext_ctrls)
-			break;
-		if (check_ext_ctrls(p, 0))
+		if (vfd->ctrl_handler)
+			ret = v4l2_g_ext_ctrls(vfd->ctrl_handler, p);
+		else if (ops->vidioc_g_ext_ctrls && check_ext_ctrls(p, 0))
 			ret = ops->vidioc_g_ext_ctrls(file, fh, p);
+		else
+			break;
 		v4l_print_ext_ctrls(cmd, vfd, p, !ret);
 		break;
 	}
@@ -1344,10 +1357,12 @@ static long __video_do_ioctl(struct file *file,
 		struct v4l2_ext_controls *p = arg;
 
 		p->error_idx = p->count;
-		if (!ops->vidioc_s_ext_ctrls)
+		if (!vfd->ctrl_handler && !ops->vidioc_s_ext_ctrls)
 			break;
 		v4l_print_ext_ctrls(cmd, vfd, p, 1);
-		if (check_ext_ctrls(p, 0))
+		if (vfd->ctrl_handler)
+			ret = v4l2_s_ext_ctrls(vfd->ctrl_handler, p);
+		else if (check_ext_ctrls(p, 0))
 			ret = ops->vidioc_s_ext_ctrls(file, fh, p);
 		break;
 	}
@@ -1356,10 +1371,12 @@ static long __video_do_ioctl(struct file *file,
 		struct v4l2_ext_controls *p = arg;
 
 		p->error_idx = p->count;
-		if (!ops->vidioc_try_ext_ctrls)
+		if (!vfd->ctrl_handler && !ops->vidioc_try_ext_ctrls)
 			break;
 		v4l_print_ext_ctrls(cmd, vfd, p, 1);
-		if (check_ext_ctrls(p, 0))
+		if (vfd->ctrl_handler)
+			ret = v4l2_try_ext_ctrls(vfd->ctrl_handler, p);
+		else if (check_ext_ctrls(p, 0))
 			ret = ops->vidioc_try_ext_ctrls(file, fh, p);
 		break;
 	}
@@ -1367,9 +1384,12 @@ static long __video_do_ioctl(struct file *file,
 	{
 		struct v4l2_querymenu *p = arg;
 
-		if (!ops->vidioc_querymenu)
+		if (vfd->ctrl_handler)
+			ret = v4l2_querymenu(vfd->ctrl_handler, p);
+		else if (ops->vidioc_querymenu)
+			ret = ops->vidioc_querymenu(file, fh, p);
+		else
 			break;
-		ret = ops->vidioc_querymenu(file, fh, p);
 		if (!ret)
 			dbgarg(cmd, "id=0x%x, index=%d, name=%s\n",
 				p->id, p->index, p->name);

drivers/media/video/wm8739.c

@@ -27,11 +27,11 @@
 #include <linux/ioctl.h>
 #include <asm/uaccess.h>
 #include <linux/i2c.h>
-#include <linux/i2c-id.h>
 #include <linux/videodev2.h>
 #include <media/v4l2-device.h>
 #include <media/v4l2-chip-ident.h>
 #include <media/v4l2-i2c-drv.h>
+#include <media/v4l2-ctrls.h>
 
 MODULE_DESCRIPTION("wm8739 driver");
 MODULE_AUTHOR("T. Adachi, Hans Verkuil");
@@ -54,12 +54,14 @@ enum {
 
 struct wm8739_state {
 	struct v4l2_subdev sd;
+	struct v4l2_ctrl_handler hdl;
+	struct {
+		/* audio cluster */
+		struct v4l2_ctrl *volume;
+		struct v4l2_ctrl *mute;
+		struct v4l2_ctrl *balance;
+	};
 	u32 clock_freq;
-	u8 muted;
-	u16 volume;
-	u16 balance;
-	u8 vol_l; 		/* +12dB to -34.5dB 1.5dB step (5bit) def:0dB */
-	u8 vol_r; 		/* +12dB to -34.5dB 1.5dB step (5bit) def:0dB */
 };
 
 static inline struct wm8739_state *to_state(struct v4l2_subdev *sd)
@@ -67,6 +69,11 @@ static inline struct wm8739_state *to_state(struct v4l2_subdev *sd)
 	return container_of(sd, struct wm8739_state, sd);
 }
 
+static inline struct v4l2_subdev *to_sd(struct v4l2_ctrl *ctrl)
+{
+	return &container_of(ctrl->handler, struct wm8739_state, hdl)->sd;
+}
+
 /* ------------------------------------------------------------------------ */
 
 static int wm8739_write(struct v4l2_subdev *sd, int reg, u16 val)
@@ -89,58 +96,17 @@ static int wm8739_write(struct v4l2_subdev *sd, int reg, u16 val)
 	return -1;
 }
 
-/* write regs to set audio volume etc */
-static void wm8739_set_audio(struct v4l2_subdev *sd)
-{
-	struct wm8739_state *state = to_state(sd);
-	u16 mute = state->muted ? 0x80 : 0;
-
-	/* Volume setting: bits 0-4, 0x1f = 12 dB, 0x00 = -34.5 dB
-	 * Default setting: 0x17 = 0 dB
-	 */
-	wm8739_write(sd, R0, (state->vol_l & 0x1f) | mute);
-	wm8739_write(sd, R1, (state->vol_r & 0x1f) | mute);
-}
-
-static int wm8739_g_ctrl(struct v4l2_subdev *sd, struct v4l2_control *ctrl)
-{
-	struct wm8739_state *state = to_state(sd);
-
-	switch (ctrl->id) {
-	case V4L2_CID_AUDIO_MUTE:
-		ctrl->value = state->muted;
-		break;
-
-	case V4L2_CID_AUDIO_VOLUME:
-		ctrl->value = state->volume;
-		break;
-
-	case V4L2_CID_AUDIO_BALANCE:
-		ctrl->value = state->balance;
-		break;
-
-	default:
-		return -EINVAL;
-	}
-	return 0;
-}
-
-static int wm8739_s_ctrl(struct v4l2_subdev *sd, struct v4l2_control *ctrl)
+static int wm8739_s_ctrl(struct v4l2_ctrl *ctrl)
 {
+	struct v4l2_subdev *sd = to_sd(ctrl);
 	struct wm8739_state *state = to_state(sd);
 	unsigned int work_l, work_r;
+	u8 vol_l;	/* +12dB to -34.5dB 1.5dB step (5bit) def:0dB */
+	u8 vol_r;	/* +12dB to -34.5dB 1.5dB step (5bit) def:0dB */
+	u16 mute;
 
 	switch (ctrl->id) {
-	case V4L2_CID_AUDIO_MUTE:
-		state->muted = ctrl->value;
-		break;
-
 	case V4L2_CID_AUDIO_VOLUME:
-		state->volume = ctrl->value;
-		break;
-
-	case V4L2_CID_AUDIO_BALANCE:
-		state->balance = ctrl->value;
 		break;
 
 	default:
@@ -148,52 +114,25 @@ static int wm8739_s_ctrl(struct v4l2_subdev *sd, struct v4l2_control *ctrl)
 	}
 
 	/* normalize ( 65535 to 0 -> 31 to 0 (12dB to -34.5dB) ) */
-	work_l = (min(65536 - state->balance, 32768) * state->volume) / 32768;
-	work_r = (min(state->balance, (u16)32768) * state->volume) / 32768;
+	work_l = (min(65536 - state->balance->val, 32768) * state->volume->val) / 32768;
+	work_r = (min(state->balance->val, 32768) * state->volume->val) / 32768;
 
-	state->vol_l = (long)work_l * 31 / 65535;
-	state->vol_r = (long)work_r * 31 / 65535;
+	vol_l = (long)work_l * 31 / 65535;
+	vol_r = (long)work_r * 31 / 65535;
 
 	/* set audio volume etc. */
-	wm8739_set_audio(sd);
+	mute = state->mute->val ? 0x80 : 0;
+
+	/* Volume setting: bits 0-4, 0x1f = 12 dB, 0x00 = -34.5 dB
+	 * Default setting: 0x17 = 0 dB
+	 */
+	wm8739_write(sd, R0, (vol_l & 0x1f) | mute);
+	wm8739_write(sd, R1, (vol_r & 0x1f) | mute);
 	return 0;
 }
 
 /* ------------------------------------------------------------------------ */
 
-static struct v4l2_queryctrl wm8739_qctrl[] = {
-	{
-		.id            = V4L2_CID_AUDIO_VOLUME,
-		.name          = "Volume",
-		.minimum       = 0,
-		.maximum       = 65535,
-		.step          = 65535/100,
-		.default_value = 58880,
-		.flags         = 0,
-		.type          = V4L2_CTRL_TYPE_INTEGER,
-	}, {
-		.id            = V4L2_CID_AUDIO_MUTE,
-		.name          = "Mute",
-		.minimum       = 0,
-		.maximum       = 1,
-		.step          = 1,
-		.default_value = 1,
-		.flags         = 0,
-		.type          = V4L2_CTRL_TYPE_BOOLEAN,
-	}, {
-		.id            = V4L2_CID_AUDIO_BALANCE,
-		.name          = "Balance",
-		.minimum       = 0,
-		.maximum       = 65535,
-		.step          = 65535/100,
-		.default_value = 32768,
-		.flags         = 0,
-		.type          = V4L2_CTRL_TYPE_INTEGER,
-	}
-};
-
-/* ------------------------------------------------------------------------ */
-
 static int wm8739_s_clock_freq(struct v4l2_subdev *sd, u32 audiofreq)
 {
 	struct wm8739_state *state = to_state(sd);
@@ -222,18 +161,6 @@ static int wm8739_s_clock_freq(struct v4l2_subdev *sd, u32 audiofreq)
 	return 0;
 }
 
-static int wm8739_queryctrl(struct v4l2_subdev *sd, struct v4l2_queryctrl *qc)
-{
-	int i;
-
-	for (i = 0; i < ARRAY_SIZE(wm8739_qctrl); i++)
-		if (qc->id && qc->id == wm8739_qctrl[i].id) {
-			memcpy(qc, &wm8739_qctrl[i], sizeof(*qc));
-			return 0;
-		}
-	return -EINVAL;
-}
-
 static int wm8739_g_chip_ident(struct v4l2_subdev *sd, struct v4l2_dbg_chip_ident *chip)
 {
 	struct i2c_client *client = v4l2_get_subdevdata(sd);
@@ -246,21 +173,26 @@ static int wm8739_log_status(struct v4l2_subdev *sd)
 	struct wm8739_state *state = to_state(sd);
 
 	v4l2_info(sd, "Frequency: %u Hz\n", state->clock_freq);
-	v4l2_info(sd, "Volume L:  %02x%s\n", state->vol_l & 0x1f,
-			state->muted ? " (muted)" : "");
-	v4l2_info(sd, "Volume R:  %02x%s\n", state->vol_r & 0x1f,
-			state->muted ? " (muted)" : "");
+	v4l2_ctrl_handler_log_status(&state->hdl, sd->name);
 	return 0;
 }
 
 /* ----------------------------------------------------------------------- */
 
+static const struct v4l2_ctrl_ops wm8739_ctrl_ops = {
+	.s_ctrl = wm8739_s_ctrl,
+};
+
 static const struct v4l2_subdev_core_ops wm8739_core_ops = {
 	.log_status = wm8739_log_status,
 	.g_chip_ident = wm8739_g_chip_ident,
-	.queryctrl = wm8739_queryctrl,
-	.g_ctrl = wm8739_g_ctrl,
-	.s_ctrl = wm8739_s_ctrl,
+	.g_ext_ctrls = v4l2_subdev_g_ext_ctrls,
+	.try_ext_ctrls = v4l2_subdev_try_ext_ctrls,
+	.s_ext_ctrls = v4l2_subdev_s_ext_ctrls,
+	.g_ctrl = v4l2_subdev_g_ctrl,
+	.s_ctrl = v4l2_subdev_s_ctrl,
+	.queryctrl = v4l2_subdev_queryctrl,
+	.querymenu = v4l2_subdev_querymenu,
 };
 
 static const struct v4l2_subdev_audio_ops wm8739_audio_ops = {
@@ -289,17 +221,28 @@ static int wm8739_probe(struct i2c_client *client,
 	v4l_info(client, "chip found @ 0x%x (%s)\n",
 			client->addr << 1, client->adapter->name);
 
-	state = kmalloc(sizeof(struct wm8739_state), GFP_KERNEL);
+	state = kzalloc(sizeof(struct wm8739_state), GFP_KERNEL);
 	if (state == NULL)
 		return -ENOMEM;
 	sd = &state->sd;
 	v4l2_i2c_subdev_init(sd, client, &wm8739_ops);
-	state->vol_l = 0x17; /* 0dB */
-	state->vol_r = 0x17; /* 0dB */
-	state->muted = 0;
-	state->balance = 32768;
-	/* normalize (12dB(31) to -34.5dB(0) [0dB(23)] -> 65535 to 0) */
-	state->volume = ((long)state->vol_l + 1) * 65535 / 31;
+	v4l2_ctrl_handler_init(&state->hdl, 2);
+	state->volume = v4l2_ctrl_new_std(&state->hdl, &wm8739_ctrl_ops,
+			V4L2_CID_AUDIO_VOLUME, 0, 65535, 65535 / 100, 50736);
+	state->mute = v4l2_ctrl_new_std(&state->hdl, &wm8739_ctrl_ops,
+			V4L2_CID_AUDIO_MUTE, 0, 1, 1, 0);
+	state->balance = v4l2_ctrl_new_std(&state->hdl, &wm8739_ctrl_ops,
+			V4L2_CID_AUDIO_BALANCE, 0, 65535, 65535 / 100, 32768);
+	sd->ctrl_handler = &state->hdl;
+	if (state->hdl.error) {
+		int err = state->hdl.error;
+
+		v4l2_ctrl_handler_free(&state->hdl);
+		kfree(state);
+		return err;
+	}
+	v4l2_ctrl_cluster(3, &state->volume);
+
 	state->clock_freq = 48000;
 
 	/* Initialize wm8739 */
@@ -318,15 +261,17 @@ static int wm8739_probe(struct i2c_client *client,
 	/* activate */
 	wm8739_write(sd, R9, 0x001);
 	/* set volume/mute */
-	wm8739_set_audio(sd);
+	v4l2_ctrl_handler_setup(&state->hdl);
 	return 0;
 }
 
 static int wm8739_remove(struct i2c_client *client)
 {
 	struct v4l2_subdev *sd = i2c_get_clientdata(client);
+	struct wm8739_state *state = to_state(sd);
 
 	v4l2_device_unregister_subdev(sd);
+	v4l2_ctrl_handler_free(&state->hdl);
 	kfree(to_state(sd));
 	return 0;
 }

drivers/media/video/wm8775.c

@@ -35,6 +35,7 @@
 #include <linux/videodev2.h>
 #include <media/v4l2-device.h>
 #include <media/v4l2-chip-ident.h>
+#include <media/v4l2-ctrls.h>
 #include <media/v4l2-i2c-drv.h>
 
 MODULE_DESCRIPTION("wm8775 driver");
@@ -53,8 +54,9 @@ enum {
 
 struct wm8775_state {
 	struct v4l2_subdev sd;
+	struct v4l2_ctrl_handler hdl;
+	struct v4l2_ctrl *mute;
 	u8 input;		/* Last selected input (0-0xf) */
-	u8 muted;
 };
 
 static inline struct wm8775_state *to_state(struct v4l2_subdev *sd)
@@ -62,6 +64,11 @@ static inline struct wm8775_state *to_state(struct v4l2_subdev *sd)
 	return container_of(sd, struct wm8775_state, sd);
 }
 
+static inline struct v4l2_subdev *to_sd(struct v4l2_ctrl *ctrl)
+{
+	return &container_of(ctrl->handler, struct wm8775_state, hdl)->sd;
+}
+
 static int wm8775_write(struct v4l2_subdev *sd, int reg, u16 val)
 {
 	struct i2c_client *client = v4l2_get_subdevdata(sd);
@@ -95,7 +102,7 @@ static int wm8775_s_routing(struct v4l2_subdev *sd,
 		return -EINVAL;
 	}
 	state->input = input;
-	if (state->muted)
+	if (!v4l2_ctrl_g_ctrl(state->mute))
 		return 0;
 	wm8775_write(sd, R21, 0x0c0);
 	wm8775_write(sd, R14, 0x1d4);
@@ -104,29 +111,21 @@ static int wm8775_s_routing(struct v4l2_subdev *sd,
 	return 0;
 }
 
-static int wm8775_g_ctrl(struct v4l2_subdev *sd, struct v4l2_control *ctrl)
+static int wm8775_s_ctrl(struct v4l2_ctrl *ctrl)
 {
+	struct v4l2_subdev *sd = to_sd(ctrl);
 	struct wm8775_state *state = to_state(sd);
 
-	if (ctrl->id != V4L2_CID_AUDIO_MUTE)
-		return -EINVAL;
-	ctrl->value = state->muted;
-	return 0;
-}
-
-static int wm8775_s_ctrl(struct v4l2_subdev *sd, struct v4l2_control *ctrl)
-{
-	struct wm8775_state *state = to_state(sd);
-
-	if (ctrl->id != V4L2_CID_AUDIO_MUTE)
-		return -EINVAL;
-	state->muted = ctrl->value;
-	wm8775_write(sd, R21, 0x0c0);
-	wm8775_write(sd, R14, 0x1d4);
-	wm8775_write(sd, R15, 0x1d4);
-	if (!state->muted)
-		wm8775_write(sd, R21, 0x100 + state->input);
-	return 0;
+	switch (ctrl->id) {
+	case V4L2_CID_AUDIO_MUTE:
+		wm8775_write(sd, R21, 0x0c0);
+		wm8775_write(sd, R14, 0x1d4);
+		wm8775_write(sd, R15, 0x1d4);
+		if (!ctrl->val)
+			wm8775_write(sd, R21, 0x100 + state->input);
+		return 0;
+	}
+	return -EINVAL;
 }
 
 static int wm8775_g_chip_ident(struct v4l2_subdev *sd, struct v4l2_dbg_chip_ident *chip)
@@ -140,8 +139,8 @@ static int wm8775_log_status(struct v4l2_subdev *sd)
 {
 	struct wm8775_state *state = to_state(sd);
 
-	v4l2_info(sd, "Input: %d%s\n", state->input,
-			state->muted ? " (muted)" : "");
+	v4l2_info(sd, "Input: %d\n", state->input);
+	v4l2_ctrl_handler_log_status(&state->hdl, sd->name);
 	return 0;
 }
 
@@ -162,11 +161,20 @@ static int wm8775_s_frequency(struct v4l2_subdev *sd, struct v4l2_frequency *fre
 
 /* ----------------------------------------------------------------------- */
 
+static const struct v4l2_ctrl_ops wm8775_ctrl_ops = {
+	.s_ctrl = wm8775_s_ctrl,
+};
+
 static const struct v4l2_subdev_core_ops wm8775_core_ops = {
 	.log_status = wm8775_log_status,
 	.g_chip_ident = wm8775_g_chip_ident,
-	.g_ctrl = wm8775_g_ctrl,
-	.s_ctrl = wm8775_s_ctrl,
+	.g_ext_ctrls = v4l2_subdev_g_ext_ctrls,
+	.try_ext_ctrls = v4l2_subdev_try_ext_ctrls,
+	.s_ext_ctrls = v4l2_subdev_s_ext_ctrls,
+	.g_ctrl = v4l2_subdev_g_ctrl,
+	.s_ctrl = v4l2_subdev_s_ctrl,
+	.queryctrl = v4l2_subdev_queryctrl,
+	.querymenu = v4l2_subdev_querymenu,
 };
 
 static const struct v4l2_subdev_tuner_ops wm8775_tuner_ops = {
@@ -205,13 +213,24 @@ static int wm8775_probe(struct i2c_client *client,
 	v4l_info(client, "chip found @ 0x%02x (%s)\n",
 			client->addr << 1, client->adapter->name);
 
-	state = kmalloc(sizeof(struct wm8775_state), GFP_KERNEL);
+	state = kzalloc(sizeof(struct wm8775_state), GFP_KERNEL);
 	if (state == NULL)
 		return -ENOMEM;
 	sd = &state->sd;
 	v4l2_i2c_subdev_init(sd, client, &wm8775_ops);
 	state->input = 2;
-	state->muted = 0;
+
+	v4l2_ctrl_handler_init(&state->hdl, 1);
+	state->mute = v4l2_ctrl_new_std(&state->hdl, &wm8775_ctrl_ops,
+			V4L2_CID_AUDIO_MUTE, 0, 1, 1, 0);
+	sd->ctrl_handler = &state->hdl;
+	if (state->hdl.error) {
+		int err = state->hdl.error;
+
+		v4l2_ctrl_handler_free(&state->hdl);
+		kfree(state);
+		return err;
+	}
 
 	/* Initialize wm8775 */
 
@@ -248,9 +267,11 @@ static int wm8775_probe(struct i2c_client *client,
 static int wm8775_remove(struct i2c_client *client)
 {
 	struct v4l2_subdev *sd = i2c_get_clientdata(client);
+	struct wm8775_state *state = to_state(sd);
 
 	v4l2_device_unregister_subdev(sd);
-	kfree(to_state(sd));
+	v4l2_ctrl_handler_free(&state->hdl);
+	kfree(state);
 	return 0;
 }
 

drivers/staging/lirc/Kconfig

@@ -3,6 +3,7 @@
 #
 menuconfig LIRC_STAGING
 	bool "Linux Infrared Remote Control IR receiver/transmitter drivers"
+	depends on LIRC
 	help
 	  Say Y here, and all supported Linux Infrared Remote Control IR and
 	  RF receiver and transmitter drivers will be displayed. When paired
@@ -13,21 +14,13 @@ if LIRC_STAGING
 
 config LIRC_BT829
         tristate "BT829 based hardware"
-	depends on LIRC_STAGING
+	depends on LIRC_STAGING && PCI
 	help
 	  Driver for the IR interface on BT829-based hardware
 
-config LIRC_ENE0100
-	tristate "ENE KB3924/ENE0100 CIR Port Reciever"
-	depends on LIRC_STAGING
-	help
-	  This is a driver for CIR port handled by ENE KB3924 embedded
-	  controller found on some notebooks.
-	  It appears on PNP list as ENE0100.
-
 config LIRC_I2C
 	tristate "I2C Based IR Receivers"
-	depends on LIRC_STAGING
+	depends on LIRC_STAGING && I2C
 	help
 	  Driver for I2C-based IR receivers, such as those commonly
 	  found onboard Hauppauge PVR-150/250/350 video capture cards
@@ -40,7 +33,7 @@ config LIRC_IGORPLUGUSB
 
 config LIRC_IMON
 	tristate "Legacy SoundGraph iMON Receiver and Display"
-	depends on LIRC_STAGING
+	depends on LIRC_STAGING && USB
 	help
 	  Driver for the original SoundGraph iMON IR Receiver and Display
 
@@ -48,7 +41,7 @@ config LIRC_IMON
 
 config LIRC_IT87
 	tristate "ITE IT87XX CIR Port Receiver"
-	depends on LIRC_STAGING
+	depends on LIRC_STAGING && PNP
 	help
 	  Driver for the ITE IT87xx IR Receiver
 
@@ -60,13 +53,13 @@ config LIRC_ITE8709
 
 config LIRC_PARALLEL
 	tristate "Homebrew Parallel Port Receiver"
-	depends on LIRC_STAGING && !SMP
+	depends on LIRC_STAGING && PARPORT && !SMP
 	help
 	  Driver for Homebrew Parallel Port Receivers
 
 config LIRC_SASEM
 	tristate "Sasem USB IR Remote"
-	depends on LIRC_STAGING
+	depends on LIRC_STAGING && USB
 	help
 	  Driver for the Sasem OnAir Remocon-V or Dign HV5 HTPC IR/VFD Module
 
@@ -89,12 +82,6 @@ config LIRC_SIR
 	help
 	  Driver for the SIR IrDA port
 
-config LIRC_STREAMZAP
-	tristate "Streamzap PC Receiver"
-	depends on LIRC_STAGING
-	help
-	  Driver for the Streamzap PC Receiver
-
 config LIRC_TTUSBIR
 	tristate "Technotrend USB IR Receiver"
 	depends on LIRC_STAGING && USB
@@ -103,7 +90,7 @@ config LIRC_TTUSBIR
 
 config LIRC_ZILOG
 	tristate "Zilog/Hauppauge IR Transmitter"
-	depends on LIRC_STAGING
+	depends on LIRC_STAGING && I2C
 	help
 	  Driver for the Zilog/Hauppauge IR Transmitter, found on
 	  PVR-150/500, HVR-1200/1250/1700/1800, HD-PVR and other cards

drivers/staging/lirc/Makefile

@@ -4,7 +4,6 @@
 # Each configuration option enables a list of files.
 
 obj-$(CONFIG_LIRC_BT829)	+= lirc_bt829.o
-obj-$(CONFIG_LIRC_ENE0100)	+= lirc_ene0100.o
 obj-$(CONFIG_LIRC_I2C)		+= lirc_i2c.o
 obj-$(CONFIG_LIRC_IGORPLUGUSB)	+= lirc_igorplugusb.o
 obj-$(CONFIG_LIRC_IMON)		+= lirc_imon.o
@@ -14,6 +13,5 @@ obj-$(CONFIG_LIRC_PARALLEL)	+= lirc_parallel.o
 obj-$(CONFIG_LIRC_SASEM)	+= lirc_sasem.o
 obj-$(CONFIG_LIRC_SERIAL)	+= lirc_serial.o
 obj-$(CONFIG_LIRC_SIR)		+= lirc_sir.o
-obj-$(CONFIG_LIRC_STREAMZAP)	+= lirc_streamzap.o
 obj-$(CONFIG_LIRC_TTUSBIR)	+= lirc_ttusbir.o
 obj-$(CONFIG_LIRC_ZILOG)	+= lirc_zilog.o

drivers/staging/lirc/lirc_ene0100.c

@@ -1,646 +0,0 @@
-/*
- * driver for ENE KB3926 B/C/D CIR (also known as ENE0100)
- *
- * Copyright (C) 2009 Maxim Levitsky <maximlevitsky@gmail.com>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of the
- * License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
- * General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307
- * USA
- */
-
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/pnp.h>
-#include <linux/io.h>
-#include <linux/interrupt.h>
-#include <linux/sched.h>
-#include "lirc_ene0100.h"
-
-static int sample_period = 75;
-static int enable_idle = 1;
-static int enable_learning;
-
-static void ene_set_idle(struct ene_device *dev, int idle);
-static void ene_set_inputs(struct ene_device *dev, int enable);
-
-/* read a hardware register */
-static u8 ene_hw_read_reg(struct ene_device *dev, u16 reg)
-{
-	outb(reg >> 8, dev->hw_io + ENE_ADDR_HI);
-	outb(reg & 0xFF, dev->hw_io + ENE_ADDR_LO);
-	return inb(dev->hw_io + ENE_IO);
-}
-
-/* write a hardware register */
-static void ene_hw_write_reg(struct ene_device *dev, u16 reg, u8 value)
-{
-	outb(reg >> 8, dev->hw_io + ENE_ADDR_HI);
-	outb(reg & 0xFF, dev->hw_io + ENE_ADDR_LO);
-	outb(value, dev->hw_io + ENE_IO);
-}
-
-/* change specific bits in hardware register */
-static void ene_hw_write_reg_mask(struct ene_device *dev,
-				  u16 reg, u8 value, u8 mask)
-{
-	u8 regvalue;
-
-	outb(reg >> 8, dev->hw_io + ENE_ADDR_HI);
-	outb(reg & 0xFF, dev->hw_io + ENE_ADDR_LO);
-
-	regvalue = inb(dev->hw_io + ENE_IO) & ~mask;
-	regvalue |= (value & mask);
-	outb(regvalue, dev->hw_io + ENE_IO);
-}
-
-/* read irq status and ack it */
-static int ene_hw_irq_status(struct ene_device *dev, int *buffer_pointer)
-{
-	u8 irq_status;
-	u8 fw_flags1, fw_flags2;
-
-	fw_flags2 = ene_hw_read_reg(dev, ENE_FW2);
-
-	if (buffer_pointer)
-		*buffer_pointer = 4 * (fw_flags2 & ENE_FW2_BUF_HIGH);
-
-	if (dev->hw_revision < ENE_HW_C) {
-		irq_status = ene_hw_read_reg(dev, ENEB_IRQ_STATUS);
-
-		if (!(irq_status & ENEB_IRQ_STATUS_IR))
-			return 0;
-		ene_hw_write_reg(dev, ENEB_IRQ_STATUS,
-				 irq_status & ~ENEB_IRQ_STATUS_IR);
-
-		/* rev B support only recieving */
-		return ENE_IRQ_RX;
-	}
-
-	irq_status = ene_hw_read_reg(dev, ENEC_IRQ);
-
-	if (!(irq_status & ENEC_IRQ_STATUS))
-		return 0;
-
-	/* original driver does that twice - a workaround ? */
-	ene_hw_write_reg(dev, ENEC_IRQ, irq_status & ~ENEC_IRQ_STATUS);
-	ene_hw_write_reg(dev, ENEC_IRQ, irq_status & ~ENEC_IRQ_STATUS);
-
-	/* clear unknown flag in F8F9 */
-	if (fw_flags2 & ENE_FW2_IRQ_CLR)
-		ene_hw_write_reg(dev, ENE_FW2, fw_flags2 & ~ENE_FW2_IRQ_CLR);
-
-	/* check if this is a TX interrupt */
-	fw_flags1 = ene_hw_read_reg(dev, ENE_FW1);
-
-	if (fw_flags1 & ENE_FW1_TXIRQ) {
-		ene_hw_write_reg(dev, ENE_FW1, fw_flags1 & ~ENE_FW1_TXIRQ);
-		return ENE_IRQ_TX;
-	} else
-		return ENE_IRQ_RX;
-}
-
-static int ene_hw_detect(struct ene_device *dev)
-{
-	u8 chip_major, chip_minor;
-	u8 hw_revision, old_ver;
-	u8 tmp;
-	u8 fw_capabilities;
-
-	tmp = ene_hw_read_reg(dev, ENE_HW_UNK);
-	ene_hw_write_reg(dev, ENE_HW_UNK, tmp & ~ENE_HW_UNK_CLR);
-
-	chip_major = ene_hw_read_reg(dev, ENE_HW_VER_MAJOR);
-	chip_minor = ene_hw_read_reg(dev, ENE_HW_VER_MINOR);
-
-	ene_hw_write_reg(dev, ENE_HW_UNK, tmp);
-	hw_revision = ene_hw_read_reg(dev, ENE_HW_VERSION);
-	old_ver = ene_hw_read_reg(dev, ENE_HW_VER_OLD);
-
-	if (hw_revision == 0xFF) {
-
-		ene_printk(KERN_WARNING, "device seems to be disabled\n");
-		ene_printk(KERN_WARNING,
-			"send a mail to lirc-list@lists.sourceforge.net\n");
-		ene_printk(KERN_WARNING, "please attach output of acpidump\n");
-
-		return -ENODEV;
-	}
-
-	if (chip_major == 0x33) {
-		ene_printk(KERN_WARNING, "chips 0x33xx aren't supported yet\n");
-		return -ENODEV;
-	}
-
-	if (chip_major == 0x39 && chip_minor == 0x26 && hw_revision == 0xC0) {
-		dev->hw_revision = ENE_HW_C;
-		ene_printk(KERN_WARNING,
-		       "KB3926C detected, driver support is not complete!\n");
-
-	} else if (old_ver == 0x24 && hw_revision == 0xC0) {
-		dev->hw_revision = ENE_HW_B;
-		ene_printk(KERN_NOTICE, "KB3926B detected\n");
-	} else {
-		dev->hw_revision = ENE_HW_D;
-		ene_printk(KERN_WARNING,
-			"unknown ENE chip detected, assuming KB3926D\n");
-		ene_printk(KERN_WARNING, "driver support incomplete");
-
-	}
-
-	ene_printk(KERN_DEBUG, "chip is 0x%02x%02x - 0x%02x, 0x%02x\n",
-		chip_major, chip_minor, old_ver, hw_revision);
-
-
-	/* detect features hardware supports */
-
-	if (dev->hw_revision < ENE_HW_C)
-		return 0;
-
-	fw_capabilities = ene_hw_read_reg(dev, ENE_FW2);
-
-	dev->hw_gpio40_learning = fw_capabilities & ENE_FW2_GP40_AS_LEARN;
-	dev->hw_learning_and_tx_capable = fw_capabilities & ENE_FW2_LEARNING;
-
-	dev->hw_fan_as_normal_input = dev->hw_learning_and_tx_capable &&
-	    fw_capabilities & ENE_FW2_FAN_AS_NRML_IN;
-
-	ene_printk(KERN_NOTICE, "hardware features:\n");
-	ene_printk(KERN_NOTICE,
-		"learning and tx %s, gpio40_learn %s, fan_in %s\n",
-	       dev->hw_learning_and_tx_capable ? "on" : "off",
-	       dev->hw_gpio40_learning ? "on" : "off",
-	       dev->hw_fan_as_normal_input ? "on" : "off");
-
-	if (!dev->hw_learning_and_tx_capable && enable_learning)
-		enable_learning = 0;
-
-	if (dev->hw_learning_and_tx_capable) {
-		ene_printk(KERN_WARNING,
-		"Device supports transmitting, but the driver doesn't\n");
-		ene_printk(KERN_WARNING,
-		"due to lack of hardware to test against.\n");
-		ene_printk(KERN_WARNING,
-		"Send a mail to: lirc-list@lists.sourceforge.net\n");
-	}
-	return 0;
-}
-
-/* hardware initialization */
-static int ene_hw_init(void *data)
-{
-	u8 reg_value;
-	struct ene_device *dev = (struct ene_device *)data;
-	dev->in_use = 1;
-
-	if (dev->hw_revision < ENE_HW_C) {
-		ene_hw_write_reg(dev, ENEB_IRQ, dev->irq << 1);
-		ene_hw_write_reg(dev, ENEB_IRQ_UNK1, 0x01);
-	} else {
-		reg_value = ene_hw_read_reg(dev, ENEC_IRQ) & 0xF0;
-		reg_value |= ENEC_IRQ_UNK_EN;
-		reg_value &= ~ENEC_IRQ_STATUS;
-		reg_value |= (dev->irq & ENEC_IRQ_MASK);
-		ene_hw_write_reg(dev, ENEC_IRQ, reg_value);
-		ene_hw_write_reg(dev, ENE_TX_UNK1, 0x63);
-	}
-
-	ene_hw_write_reg(dev, ENE_CIR_CONF2, 0x00);
-	ene_set_inputs(dev, enable_learning);
-
-	/* set sampling period */
-	ene_hw_write_reg(dev, ENE_CIR_SAMPLE_PERIOD, sample_period);
-
-	/* ack any pending irqs - just in case */
-	ene_hw_irq_status(dev, NULL);
-
-	/* enter idle mode */
-	ene_set_idle(dev, 1);
-
-	/* enable firmware bits */
-	ene_hw_write_reg_mask(dev, ENE_FW1,
-			      ENE_FW1_ENABLE | ENE_FW1_IRQ,
-			      ENE_FW1_ENABLE | ENE_FW1_IRQ);
-	/* clear stats */
-	dev->sample = 0;
-	return 0;
-}
-
-/* this enables gpio40 signal, used if connected to wide band input*/
-static void ene_enable_gpio40(struct ene_device *dev, int enable)
-{
-	ene_hw_write_reg_mask(dev, ENE_CIR_CONF1, enable ?
-			      0 : ENE_CIR_CONF2_GPIO40DIS,
-			      ENE_CIR_CONF2_GPIO40DIS);
-}
-
-/* this enables the classic sampler */
-static void ene_enable_normal_recieve(struct ene_device *dev, int enable)
-{
-	ene_hw_write_reg(dev, ENE_CIR_CONF1, enable ? ENE_CIR_CONF1_ADC_ON : 0);
-}
-
-/* this enables recieve via fan input */
-static void ene_enable_fan_recieve(struct ene_device *dev, int enable)
-{
-	if (!enable)
-		ene_hw_write_reg(dev, ENE_FAN_AS_IN1, 0);
-	else {
-		ene_hw_write_reg(dev, ENE_FAN_AS_IN1, ENE_FAN_AS_IN1_EN);
-		ene_hw_write_reg(dev, ENE_FAN_AS_IN2, ENE_FAN_AS_IN2_EN);
-	}
-	dev->fan_input_inuse = enable;
-}
-
-/* determine which input to use*/
-static void ene_set_inputs(struct ene_device *dev, int learning_enable)
-{
-	ene_enable_normal_recieve(dev, 1);
-
-	/* old hardware doesn't support learning mode for sure */
-	if (dev->hw_revision <= ENE_HW_B)
-		return;
-
-	/* reciever not learning capable, still set gpio40 correctly */
-	if (!dev->hw_learning_and_tx_capable) {
-		ene_enable_gpio40(dev, !dev->hw_gpio40_learning);
-		return;
-	}
-
-	/* enable learning mode */
-	if (learning_enable) {
-		ene_enable_gpio40(dev, dev->hw_gpio40_learning);
-
-		/* fan input is not used for learning */
-		if (dev->hw_fan_as_normal_input)
-			ene_enable_fan_recieve(dev, 0);
-
-	/* disable learning mode */
-	} else {
-		if (dev->hw_fan_as_normal_input) {
-			ene_enable_fan_recieve(dev, 1);
-			ene_enable_normal_recieve(dev, 0);
-		} else
-			ene_enable_gpio40(dev, !dev->hw_gpio40_learning);
-	}
-
-	/* set few additional settings for this mode */
-	ene_hw_write_reg_mask(dev, ENE_CIR_CONF1, learning_enable ?
-			      ENE_CIR_CONF1_LEARN1 : 0, ENE_CIR_CONF1_LEARN1);
-
-	ene_hw_write_reg_mask(dev, ENE_CIR_CONF2, learning_enable ?
-			      ENE_CIR_CONF2_LEARN2 : 0, ENE_CIR_CONF2_LEARN2);
-}
-
-/* deinitialization */
-static void ene_hw_deinit(void *data)
-{
-	struct ene_device *dev = (struct ene_device *)data;
-
-	/* disable samplers */
-	ene_enable_normal_recieve(dev, 0);
-
-	if (dev->hw_fan_as_normal_input)
-		ene_enable_fan_recieve(dev, 0);
-
-	/* disable hardware IRQ and firmware flag */
-	ene_hw_write_reg_mask(dev, ENE_FW1, 0, ENE_FW1_ENABLE | ENE_FW1_IRQ);
-
-	ene_set_idle(dev, 1);
-	dev->in_use = 0;
-}
-
-/*  sends current sample to userspace */
-static void send_sample(struct ene_device *dev)
-{
-	int value = abs(dev->sample) & PULSE_MASK;
-
-	if (dev->sample > 0)
-		value |= PULSE_BIT;
-
-	if (!lirc_buffer_full(dev->lirc_driver->rbuf)) {
-		lirc_buffer_write(dev->lirc_driver->rbuf, (void *)&value);
-		wake_up(&dev->lirc_driver->rbuf->wait_poll);
-	}
-	dev->sample = 0;
-}
-
-/*  this updates current sample */
-static void update_sample(struct ene_device *dev, int sample)
-{
-	if (!dev->sample)
-		dev->sample = sample;
-	else if (same_sign(dev->sample, sample))
-		dev->sample += sample;
-	else {
-		send_sample(dev);
-		dev->sample = sample;
-	}
-}
-
-/* enable or disable idle mode */
-static void ene_set_idle(struct ene_device *dev, int idle)
-{
-	struct timeval now;
-	int disable = idle && enable_idle && (dev->hw_revision < ENE_HW_C);
-
-	ene_hw_write_reg_mask(dev, ENE_CIR_SAMPLE_PERIOD,
-			      disable ? 0 : ENE_CIR_SAMPLE_OVERFLOW,
-			      ENE_CIR_SAMPLE_OVERFLOW);
-	dev->idle = idle;
-
-	/* remember when we have entered the idle mode */
-	if (idle) {
-		do_gettimeofday(&dev->gap_start);
-		return;
-	}
-
-	/* send the gap between keypresses now */
-	do_gettimeofday(&now);
-
-	if (now.tv_sec - dev->gap_start.tv_sec > 16)
-		dev->sample = space(PULSE_MASK);
-	else
-		dev->sample = dev->sample +
-		    space(1000000ull * (now.tv_sec - dev->gap_start.tv_sec))
-		    + space(now.tv_usec - dev->gap_start.tv_usec);
-
-	if (abs(dev->sample) > PULSE_MASK)
-		dev->sample = space(PULSE_MASK);
-	send_sample(dev);
-}
-
-/* interrupt handler */
-static irqreturn_t ene_hw_irq(int irq, void *data)
-{
-	u16 hw_value;
-	int i, hw_sample;
-	int space;
-	int buffer_pointer;
-	int irq_status;
-
-	struct ene_device *dev = (struct ene_device *)data;
-	irq_status = ene_hw_irq_status(dev, &buffer_pointer);
-
-	if (!irq_status)
-		return IRQ_NONE;
-
-	/* TODO: only RX for now */
-	if (irq_status == ENE_IRQ_TX)
-		return IRQ_HANDLED;
-
-	for (i = 0; i < ENE_SAMPLES_SIZE; i++) {
-
-		hw_value = ene_hw_read_reg(dev,
-				ENE_SAMPLE_BUFFER + buffer_pointer + i);
-
-		if (dev->fan_input_inuse) {
-			/* read high part of the sample */
-			hw_value |= ene_hw_read_reg(dev,
-			    ENE_SAMPLE_BUFFER_FAN + buffer_pointer + i) << 8;
-
-			/* test for _space_ bit */
-			space = !(hw_value & ENE_FAN_SMPL_PULS_MSK);
-
-			/* clear space bit, and other unused bits */
-			hw_value &= ENE_FAN_VALUE_MASK;
-			hw_sample = hw_value * ENE_SAMPLE_PERIOD_FAN;
-
-		} else {
-			space = hw_value & ENE_SAMPLE_SPC_MASK;
-			hw_value &= ENE_SAMPLE_VALUE_MASK;
-			hw_sample = hw_value * sample_period;
-		}
-
-		/* no more data */
-		if (!(hw_value))
-			break;
-
-		if (space)
-			hw_sample *= -1;
-
-		/* overflow sample recieved, handle it */
-
-		if (!dev->fan_input_inuse && hw_value == ENE_SAMPLE_OVERFLOW) {
-
-			if (dev->idle)
-				continue;
-
-			if (dev->sample > 0 || abs(dev->sample) <= ENE_MAXGAP)
-				update_sample(dev, hw_sample);
-			else
-				ene_set_idle(dev, 1);
-
-			continue;
-		}
-
-		/* normal first sample recieved */
-		if (!dev->fan_input_inuse && dev->idle) {
-			ene_set_idle(dev, 0);
-
-			/* discard first recieved value, its random
-			   since its the time signal was off before
-			   first pulse if idle mode is enabled, HW
-			   does that for us */
-
-			if (!enable_idle)
-				continue;
-		}
-		update_sample(dev, hw_sample);
-		send_sample(dev);
-	}
-	return IRQ_HANDLED;
-}
-
-static int ene_probe(struct pnp_dev *pnp_dev,
-		     const struct pnp_device_id *dev_id)
-{
-	struct ene_device *dev;
-	struct lirc_driver *lirc_driver;
-	int error = -ENOMEM;
-
-	dev = kzalloc(sizeof(struct ene_device), GFP_KERNEL);
-
-	if (!dev)
-		goto err1;
-
-	dev->pnp_dev = pnp_dev;
-	pnp_set_drvdata(pnp_dev, dev);
-
-
-	/* prepare lirc interface */
-	error = -ENOMEM;
-	lirc_driver = kzalloc(sizeof(struct lirc_driver), GFP_KERNEL);
-
-	if (!lirc_driver)
-		goto err2;
-
-	dev->lirc_driver = lirc_driver;
-
-	strcpy(lirc_driver->name, ENE_DRIVER_NAME);
-	lirc_driver->minor = -1;
-	lirc_driver->code_length = sizeof(int) * 8;
-	lirc_driver->features = LIRC_CAN_REC_MODE2;
-	lirc_driver->data = dev;
-	lirc_driver->set_use_inc = ene_hw_init;
-	lirc_driver->set_use_dec = ene_hw_deinit;
-	lirc_driver->dev = &pnp_dev->dev;
-	lirc_driver->owner = THIS_MODULE;
-
-	lirc_driver->rbuf = kzalloc(sizeof(struct lirc_buffer), GFP_KERNEL);
-
-	if (!lirc_driver->rbuf)
-		goto err3;
-
-	if (lirc_buffer_init(lirc_driver->rbuf, sizeof(int), sizeof(int) * 256))
-		goto err4;
-
-	error = -ENODEV;
-	if (lirc_register_driver(lirc_driver))
-		goto err5;
-
-	/* validate resources */
-	if (!pnp_port_valid(pnp_dev, 0) ||
-	    pnp_port_len(pnp_dev, 0) < ENE_MAX_IO)
-		goto err6;
-
-	if (!pnp_irq_valid(pnp_dev, 0))
-		goto err6;
-
-	dev->hw_io = pnp_port_start(pnp_dev, 0);
-	dev->irq = pnp_irq(pnp_dev, 0);
-
-	/* claim the resources */
-	error = -EBUSY;
-	if (!request_region(dev->hw_io, ENE_MAX_IO, ENE_DRIVER_NAME))
-		goto err6;
-
-	if (request_irq(dev->irq, ene_hw_irq,
-			IRQF_SHARED, ENE_DRIVER_NAME, (void *)dev))
-		goto err7;
-
-	/* detect hardware version and features */
-	error = ene_hw_detect(dev);
-	if (error)
-		goto err8;
-
-	ene_printk(KERN_NOTICE, "driver has been succesfully loaded\n");
-	return 0;
-
-err8:
-	free_irq(dev->irq, dev);
-err7:
-	release_region(dev->hw_io, ENE_MAX_IO);
-err6:
-	lirc_unregister_driver(lirc_driver->minor);
-err5:
-	lirc_buffer_free(lirc_driver->rbuf);
-err4:
-	kfree(lirc_driver->rbuf);
-err3:
-	kfree(lirc_driver);
-err2:
-	kfree(dev);
-err1:
-	return error;
-}
-
-static void ene_remove(struct pnp_dev *pnp_dev)
-{
-	struct ene_device *dev = pnp_get_drvdata(pnp_dev);
-	ene_hw_deinit(dev);
-	free_irq(dev->irq, dev);
-	release_region(dev->hw_io, ENE_MAX_IO);
-	lirc_unregister_driver(dev->lirc_driver->minor);
-	lirc_buffer_free(dev->lirc_driver->rbuf);
-	kfree(dev->lirc_driver);
-	kfree(dev);
-}
-
-#ifdef CONFIG_PM
-
-/* TODO: make 'wake on IR' configurable and add .shutdown */
-/* currently impossible due to lack of kernel support */
-
-static int ene_suspend(struct pnp_dev *pnp_dev, pm_message_t state)
-{
-	struct ene_device *dev = pnp_get_drvdata(pnp_dev);
-	ene_hw_write_reg_mask(dev, ENE_FW1, ENE_FW1_WAKE, ENE_FW1_WAKE);
-	return 0;
-}
-
-static int ene_resume(struct pnp_dev *pnp_dev)
-{
-	struct ene_device *dev = pnp_get_drvdata(pnp_dev);
-	if (dev->in_use)
-		ene_hw_init(dev);
-
-	ene_hw_write_reg_mask(dev, ENE_FW1, 0, ENE_FW1_WAKE);
-	return 0;
-}
-
-#endif
-
-static const struct pnp_device_id ene_ids[] = {
-	{.id = "ENE0100",},
-	{},
-};
-
-static struct pnp_driver ene_driver = {
-	.name = ENE_DRIVER_NAME,
-	.id_table = ene_ids,
-	.flags = PNP_DRIVER_RES_DO_NOT_CHANGE,
-
-	.probe = ene_probe,
-	.remove = __devexit_p(ene_remove),
-
-#ifdef CONFIG_PM
-	.suspend = ene_suspend,
-	.resume = ene_resume,
-#endif
-};
-
-static int __init ene_init(void)
-{
-	if (sample_period < 5) {
-		ene_printk(KERN_ERR, "sample period must be at\n");
-		ene_printk(KERN_ERR, "least 5 us, (at least 30 recommended)\n");
-		return -EINVAL;
-	}
-	return pnp_register_driver(&ene_driver);
-}
-
-static void ene_exit(void)
-{
-	pnp_unregister_driver(&ene_driver);
-}
-
-module_param(sample_period, int, S_IRUGO);
-MODULE_PARM_DESC(sample_period, "Hardware sample period (75 us default)");
-
-module_param(enable_idle, bool, S_IRUGO | S_IWUSR);
-MODULE_PARM_DESC(enable_idle,
-	"Enables turning off signal sampling after long inactivity time; "
-	"if disabled might help detecting input signal (default: enabled)");
-
-module_param(enable_learning, bool, S_IRUGO);
-MODULE_PARM_DESC(enable_learning, "Use wide band (learning) reciever");
-
-MODULE_DEVICE_TABLE(pnp, ene_ids);
-MODULE_DESCRIPTION
-    ("LIRC driver for KB3926B/KB3926C/KB3926D (aka ENE0100) CIR port");
-MODULE_AUTHOR("Maxim Levitsky");
-MODULE_LICENSE("GPL");
-
-module_init(ene_init);
-module_exit(ene_exit);

drivers/staging/lirc/lirc_it87.c

@@ -109,6 +109,7 @@ static DECLARE_WAIT_QUEUE_HEAD(lirc_read_queue);
 
 static DEFINE_SPINLOCK(hardware_lock);
 static DEFINE_SPINLOCK(dev_lock);
+static bool device_open;
 
 static int rx_buf[RBUF_LEN];
 unsigned int rx_tail, rx_head;
@@ -147,10 +148,11 @@ static void drop_port(void);
 static int lirc_open(struct inode *inode, struct file *file)
 {
 	spin_lock(&dev_lock);
-	if (module_refcount(THIS_MODULE)) {
+	if (device_open) {
 		spin_unlock(&dev_lock);
 		return -EBUSY;
 	}
+	device_open = true;
 	spin_unlock(&dev_lock);
 	return 0;
 }
@@ -158,6 +160,9 @@ static int lirc_open(struct inode *inode, struct file *file)
 
 static int lirc_close(struct inode *inode, struct file *file)
 {
+	spin_lock(&dev_lock);
+	device_open = false;
+	spin_unlock(&dev_lock);
 	return 0;
 }
 
@@ -363,7 +368,6 @@ static struct lirc_driver driver = {
 };
 
 
-#ifdef MODULE
 static int init_chrdev(void)
 {
 	driver.minor = lirc_register_driver(&driver);
@@ -380,7 +384,6 @@ static void drop_chrdev(void)
 {
 	lirc_unregister_driver(driver.minor);
 }
-#endif
 
 
 /* SECTION: Hardware */

drivers/staging/lirc/lirc_parallel.c

@@ -240,7 +240,7 @@ static void irq_handler(void *blah)
 	unsigned int level, newlevel;
 	unsigned int timeout;
 
-	if (!module_refcount(THIS_MODULE))
+	if (!is_open)
 		return;
 
 	if (!is_claimed)
@@ -515,7 +515,7 @@ static long lirc_ioctl(struct file *filep, unsigned int cmd, unsigned long arg)
 
 static int lirc_open(struct inode *node, struct file *filep)
 {
-	if (module_refcount(THIS_MODULE) || !lirc_claim())
+	if (is_open || !lirc_claim())
 		return -EBUSY;
 
 	parport_enable_irq(pport);

drivers/staging/lirc/lirc_streamzap.c

@@ -1,821 +0,0 @@
-/*
- * Streamzap Remote Control driver
- *
- * Copyright (c) 2005 Christoph Bartelmus <lirc@bartelmus.de>
- *
- * This driver was based on the work of Greg Wickham and Adrian
- * Dewhurst. It was substantially rewritten to support correct signal
- * gaps and now maintains a delay buffer, which is used to present
- * consistent timing behaviour to user space applications. Without the
- * delay buffer an ugly hack would be required in lircd, which can
- * cause sluggish signal decoding in certain situations.
- *
- * This driver is based on the USB skeleton driver packaged with the
- * kernel; copyright (C) 2001-2003 Greg Kroah-Hartman (greg@kroah.com)
- *
- *  This program is free software; you can redistribute it and/or modify
- *  it under the terms of the GNU General Public License as published by
- *  the Free Software Foundation; either version 2 of the License, or
- *  (at your option) any later version.
- *
- *  This program is distributed in the hope that it will be useful,
- *  but WITHOUT ANY WARRANTY; without even the implied warranty of
- *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *  GNU General Public License for more details.
- *
- *  You should have received a copy of the GNU General Public License
- *  along with this program; if not, write to the Free Software
- *  Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-
-#include <linux/kernel.h>
-#include <linux/errno.h>
-#include <linux/init.h>
-#include <linux/slab.h>
-#include <linux/module.h>
-#include <linux/smp_lock.h>
-#include <linux/completion.h>
-#include <linux/uaccess.h>
-#include <linux/usb.h>
-
-#include <media/lirc.h>
-#include <media/lirc_dev.h>
-
-#define DRIVER_VERSION	"1.28"
-#define DRIVER_NAME	"lirc_streamzap"
-#define DRIVER_DESC	"Streamzap Remote Control driver"
-
-static int debug;
-
-#define USB_STREAMZAP_VENDOR_ID		0x0e9c
-#define USB_STREAMZAP_PRODUCT_ID	0x0000
-
-/* Use our own dbg macro */
-#define dprintk(fmt, args...)					\
-	do {							\
-		if (debug)					\
-			printk(KERN_DEBUG DRIVER_NAME "[%d]: "	\
-			       fmt "\n", ## args);		\
-	} while (0)
-
-/* table of devices that work with this driver */
-static struct usb_device_id streamzap_table[] = {
-	/* Streamzap Remote Control */
-	{ USB_DEVICE(USB_STREAMZAP_VENDOR_ID, USB_STREAMZAP_PRODUCT_ID) },
-	/* Terminating entry */
-	{ }
-};
-
-MODULE_DEVICE_TABLE(usb, streamzap_table);
-
-#define STREAMZAP_PULSE_MASK 0xf0
-#define STREAMZAP_SPACE_MASK 0x0f
-#define STREAMZAP_TIMEOUT    0xff
-#define STREAMZAP_RESOLUTION 256
-
-/* number of samples buffered */
-#define STREAMZAP_BUF_LEN 128
-
-enum StreamzapDecoderState {
-	PulseSpace,
-	FullPulse,
-	FullSpace,
-	IgnorePulse
-};
-
-/* Structure to hold all of our device specific stuff
- *
- * some remarks regarding locking:
- * theoretically this struct can be accessed from three threads:
- *
- * - from lirc_dev through set_use_inc/set_use_dec
- *
- * - from the USB layer throuh probe/disconnect/irq
- *
- *   Careful placement of lirc_register_driver/lirc_unregister_driver
- *   calls will prevent conflicts. lirc_dev makes sure that
- *   set_use_inc/set_use_dec are not being executed and will not be
- *   called after lirc_unregister_driver returns.
- *
- * - by the timer callback
- *
- *   The timer is only running when the device is connected and the
- *   LIRC device is open. Making sure the timer is deleted by
- *   set_use_dec will make conflicts impossible.
- */
-struct usb_streamzap {
-
-	/* usb */
-	/* save off the usb device pointer */
-	struct usb_device	*udev;
-	/* the interface for this device */
-	struct usb_interface	*interface;
-
-	/* buffer & dma */
-	unsigned char		*buf_in;
-	dma_addr_t		dma_in;
-	unsigned int		buf_in_len;
-
-	struct usb_endpoint_descriptor *endpoint;
-
-	/* IRQ */
-	struct urb		*urb_in;
-
-	/* lirc */
-	struct lirc_driver	*driver;
-	struct lirc_buffer	*delay_buf;
-
-	/* timer used to support delay buffering */
-	struct timer_list	delay_timer;
-	int			timer_running;
-	spinlock_t		timer_lock;
-
-	/* tracks whether we are currently receiving some signal */
-	int			idle;
-	/* sum of signal lengths received since signal start */
-	unsigned long		sum;
-	/* start time of signal; necessary for gap tracking */
-	struct timeval		signal_last;
-	struct timeval		signal_start;
-	enum StreamzapDecoderState decoder_state;
-	struct timer_list	flush_timer;
-	int			flush;
-	int			in_use;
-	int			timeout_enabled;
-};
-
-
-/* local function prototypes */
-static int streamzap_probe(struct usb_interface *interface,
-			   const struct usb_device_id *id);
-static void streamzap_disconnect(struct usb_interface *interface);
-static void usb_streamzap_irq(struct urb *urb);
-static int streamzap_use_inc(void *data);
-static void streamzap_use_dec(void *data);
-static long streamzap_ioctl(struct file *filep, unsigned int cmd,
-			    unsigned long arg);
-static int streamzap_suspend(struct usb_interface *intf, pm_message_t message);
-static int streamzap_resume(struct usb_interface *intf);
-
-/* usb specific object needed to register this driver with the usb subsystem */
-
-static struct usb_driver streamzap_driver = {
-	.name =		DRIVER_NAME,
-	.probe =	streamzap_probe,
-	.disconnect =	streamzap_disconnect,
-	.suspend =	streamzap_suspend,
-	.resume =	streamzap_resume,
-	.id_table =	streamzap_table,
-};
-
-static void stop_timer(struct usb_streamzap *sz)
-{
-	unsigned long flags;
-
-	spin_lock_irqsave(&sz->timer_lock, flags);
-	if (sz->timer_running) {
-		sz->timer_running = 0;
-		spin_unlock_irqrestore(&sz->timer_lock, flags);
-		del_timer_sync(&sz->delay_timer);
-	} else {
-		spin_unlock_irqrestore(&sz->timer_lock, flags);
-	}
-}
-
-static void flush_timeout(unsigned long arg)
-{
-	struct usb_streamzap *sz = (struct usb_streamzap *) arg;
-
-	/* finally start accepting data */
-	sz->flush = 0;
-}
-static void delay_timeout(unsigned long arg)
-{
-	unsigned long flags;
-	/* deliver data every 10 ms */
-	static unsigned long timer_inc =
-		(10000/(1000000/HZ)) == 0 ? 1 : (10000/(1000000/HZ));
-	struct usb_streamzap *sz = (struct usb_streamzap *) arg;
-	int data;
-
-	spin_lock_irqsave(&sz->timer_lock, flags);
-
-	if (!lirc_buffer_empty(sz->delay_buf) &&
-	    !lirc_buffer_full(sz->driver->rbuf)) {
-		lirc_buffer_read(sz->delay_buf, (unsigned char *) &data);
-		lirc_buffer_write(sz->driver->rbuf, (unsigned char *) &data);
-	}
-	if (!lirc_buffer_empty(sz->delay_buf)) {
-		while (lirc_buffer_available(sz->delay_buf) <
-		       STREAMZAP_BUF_LEN / 2 &&
-		       !lirc_buffer_full(sz->driver->rbuf)) {
-			lirc_buffer_read(sz->delay_buf,
-					   (unsigned char *) &data);
-			lirc_buffer_write(sz->driver->rbuf,
-					    (unsigned char *) &data);
-		}
-		if (sz->timer_running) {
-			sz->delay_timer.expires = jiffies + timer_inc;
-			add_timer(&sz->delay_timer);
-		}
-	} else {
-		sz->timer_running = 0;
-	}
-
-	if (!lirc_buffer_empty(sz->driver->rbuf))
-		wake_up(&sz->driver->rbuf->wait_poll);
-
-	spin_unlock_irqrestore(&sz->timer_lock, flags);
-}
-
-static void flush_delay_buffer(struct usb_streamzap *sz)
-{
-	int data;
-	int empty = 1;
-
-	while (!lirc_buffer_empty(sz->delay_buf)) {
-		empty = 0;
-		lirc_buffer_read(sz->delay_buf, (unsigned char *) &data);
-		if (!lirc_buffer_full(sz->driver->rbuf)) {
-			lirc_buffer_write(sz->driver->rbuf,
-					    (unsigned char *) &data);
-		} else {
-			dprintk("buffer overflow", sz->driver->minor);
-		}
-	}
-	if (!empty)
-		wake_up(&sz->driver->rbuf->wait_poll);
-}
-
-static void push(struct usb_streamzap *sz, unsigned char *data)
-{
-	unsigned long flags;
-
-	spin_lock_irqsave(&sz->timer_lock, flags);
-	if (lirc_buffer_full(sz->delay_buf)) {
-		int read_data;
-
-		lirc_buffer_read(sz->delay_buf,
-				   (unsigned char *) &read_data);
-		if (!lirc_buffer_full(sz->driver->rbuf)) {
-			lirc_buffer_write(sz->driver->rbuf,
-					    (unsigned char *) &read_data);
-		} else {
-			dprintk("buffer overflow", sz->driver->minor);
-		}
-	}
-
-	lirc_buffer_write(sz->delay_buf, data);
-
-	if (!sz->timer_running) {
-		sz->delay_timer.expires = jiffies + HZ/10;
-		add_timer(&sz->delay_timer);
-		sz->timer_running = 1;
-	}
-
-	spin_unlock_irqrestore(&sz->timer_lock, flags);
-}
-
-static void push_full_pulse(struct usb_streamzap *sz,
-			    unsigned char value)
-{
-	int pulse;
-
-	if (sz->idle) {
-		long deltv;
-		int tmp;
-
-		sz->signal_last = sz->signal_start;
-		do_gettimeofday(&sz->signal_start);
-
-		deltv = sz->signal_start.tv_sec-sz->signal_last.tv_sec;
-		if (deltv > 15) {
-			/* really long time */
-			tmp = LIRC_SPACE(LIRC_VALUE_MASK);
-		} else {
-			tmp = (int) (deltv*1000000+
-					sz->signal_start.tv_usec -
-					sz->signal_last.tv_usec);
-			tmp -= sz->sum;
-			tmp = LIRC_SPACE(tmp);
-		}
-		dprintk("ls %u", sz->driver->minor, tmp);
-		push(sz, (char *)&tmp);
-
-		sz->idle = 0;
-		sz->sum = 0;
-	}
-
-	pulse = ((int) value) * STREAMZAP_RESOLUTION;
-	pulse += STREAMZAP_RESOLUTION / 2;
-	sz->sum += pulse;
-	pulse = LIRC_PULSE(pulse);
-
-	dprintk("p %u", sz->driver->minor, pulse & PULSE_MASK);
-	push(sz, (char *)&pulse);
-}
-
-static void push_half_pulse(struct usb_streamzap *sz,
-			    unsigned char value)
-{
-	push_full_pulse(sz, (value & STREAMZAP_PULSE_MASK)>>4);
-}
-
-static void push_full_space(struct usb_streamzap *sz,
-			    unsigned char value)
-{
-	int space;
-
-	space = ((int) value)*STREAMZAP_RESOLUTION;
-	space += STREAMZAP_RESOLUTION/2;
-	sz->sum += space;
-	space = LIRC_SPACE(space);
-	dprintk("s %u", sz->driver->minor, space);
-	push(sz, (char *)&space);
-}
-
-static void push_half_space(struct usb_streamzap *sz,
-			    unsigned char value)
-{
-	push_full_space(sz, value & STREAMZAP_SPACE_MASK);
-}
-
-/**
- * usb_streamzap_irq - IRQ handler
- *
- * This procedure is invoked on reception of data from
- * the usb remote.
- */
-static void usb_streamzap_irq(struct urb *urb)
-{
-	struct usb_streamzap *sz;
-	int		len;
-	unsigned int	i = 0;
-
-	if (!urb)
-		return;
-
-	sz = urb->context;
-	len = urb->actual_length;
-
-	switch (urb->status) {
-	case -ECONNRESET:
-	case -ENOENT:
-	case -ESHUTDOWN:
-		/*
-		 * this urb is terminated, clean up.
-		 * sz might already be invalid at this point
-		 */
-		dprintk("urb status: %d", -1, urb->status);
-		return;
-	default:
-		break;
-	}
-
-	dprintk("received %d", sz->driver->minor, urb->actual_length);
-	if (!sz->flush) {
-		for (i = 0; i < urb->actual_length; i++) {
-			dprintk("%d: %x", sz->driver->minor,
-				i, (unsigned char) sz->buf_in[i]);
-			switch (sz->decoder_state) {
-			case PulseSpace:
-				if ((sz->buf_in[i]&STREAMZAP_PULSE_MASK) ==
-				    STREAMZAP_PULSE_MASK) {
-					sz->decoder_state = FullPulse;
-					continue;
-				} else if ((sz->buf_in[i]&STREAMZAP_SPACE_MASK)
-					   == STREAMZAP_SPACE_MASK) {
-					push_half_pulse(sz, sz->buf_in[i]);
-					sz->decoder_state = FullSpace;
-					continue;
-				} else {
-					push_half_pulse(sz, sz->buf_in[i]);
-					push_half_space(sz, sz->buf_in[i]);
-				}
-				break;
-			case FullPulse:
-				push_full_pulse(sz, sz->buf_in[i]);
-				sz->decoder_state = IgnorePulse;
-				break;
-			case FullSpace:
-				if (sz->buf_in[i] == STREAMZAP_TIMEOUT) {
-					sz->idle = 1;
-					stop_timer(sz);
-					if (sz->timeout_enabled) {
-						int timeout =
-							LIRC_TIMEOUT
-							(STREAMZAP_TIMEOUT *
-							STREAMZAP_RESOLUTION);
-						push(sz, (char *)&timeout);
-					}
-					flush_delay_buffer(sz);
-				} else
-					push_full_space(sz, sz->buf_in[i]);
-				sz->decoder_state = PulseSpace;
-				break;
-			case IgnorePulse:
-				if ((sz->buf_in[i]&STREAMZAP_SPACE_MASK) ==
-				    STREAMZAP_SPACE_MASK) {
-					sz->decoder_state = FullSpace;
-					continue;
-				}
-				push_half_space(sz, sz->buf_in[i]);
-				sz->decoder_state = PulseSpace;
-				break;
-			}
-		}
-	}
-
-	usb_submit_urb(urb, GFP_ATOMIC);
-
-	return;
-}
-
-static const struct file_operations streamzap_fops = {
-	.owner		= THIS_MODULE,
-	.unlocked_ioctl	= streamzap_ioctl,
-	.read		= lirc_dev_fop_read,
-	.write		= lirc_dev_fop_write,
-	.poll		= lirc_dev_fop_poll,
-	.open		= lirc_dev_fop_open,
-	.release	= lirc_dev_fop_close,
-};
-
-
-/**
- *	streamzap_probe
- *
- *	Called by usb-core to associated with a candidate device
- *	On any failure the return value is the ERROR
- *	On success return 0
- */
-static int streamzap_probe(struct usb_interface *interface,
-			   const struct usb_device_id *id)
-{
-	struct usb_device *udev = interface_to_usbdev(interface);
-	struct usb_host_interface *iface_host;
-	struct usb_streamzap *sz;
-	struct lirc_driver *driver;
-	struct lirc_buffer *lirc_buf;
-	struct lirc_buffer *delay_buf;
-	char buf[63], name[128] = "";
-	int retval = -ENOMEM;
-	int minor = 0;
-
-	/* Allocate space for device driver specific data */
-	sz = kzalloc(sizeof(struct usb_streamzap), GFP_KERNEL);
-	if (sz == NULL)
-		return -ENOMEM;
-
-	sz->udev = udev;
-	sz->interface = interface;
-
-	/* Check to ensure endpoint information matches requirements */
-	iface_host = interface->cur_altsetting;
-
-	if (iface_host->desc.bNumEndpoints != 1) {
-		err("%s: Unexpected desc.bNumEndpoints (%d)", __func__,
-		    iface_host->desc.bNumEndpoints);
-		retval = -ENODEV;
-		goto free_sz;
-	}
-
-	sz->endpoint = &(iface_host->endpoint[0].desc);
-	if ((sz->endpoint->bEndpointAddress & USB_ENDPOINT_DIR_MASK)
-	    != USB_DIR_IN) {
-		err("%s: endpoint doesn't match input device 02%02x",
-		    __func__, sz->endpoint->bEndpointAddress);
-		retval = -ENODEV;
-		goto free_sz;
-	}
-
-	if ((sz->endpoint->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK)
-	    != USB_ENDPOINT_XFER_INT) {
-		err("%s: endpoint attributes don't match xfer 02%02x",
-		    __func__, sz->endpoint->bmAttributes);
-		retval = -ENODEV;
-		goto free_sz;
-	}
-
-	if (sz->endpoint->wMaxPacketSize == 0) {
-		err("%s: endpoint message size==0? ", __func__);
-		retval = -ENODEV;
-		goto free_sz;
-	}
-
-	/* Allocate the USB buffer and IRQ URB */
-
-	sz->buf_in_len = sz->endpoint->wMaxPacketSize;
-	sz->buf_in = usb_alloc_coherent(sz->udev, sz->buf_in_len,
-				      GFP_ATOMIC, &sz->dma_in);
-	if (sz->buf_in == NULL)
-		goto free_sz;
-
-	sz->urb_in = usb_alloc_urb(0, GFP_KERNEL);
-	if (sz->urb_in == NULL)
-		goto free_sz;
-
-	/* Connect this device to the LIRC sub-system */
-	driver = kzalloc(sizeof(struct lirc_driver), GFP_KERNEL);
-	if (!driver)
-		goto free_sz;
-
-	lirc_buf = kmalloc(sizeof(struct lirc_buffer), GFP_KERNEL);
-	if (!lirc_buf)
-		goto free_driver;
-	if (lirc_buffer_init(lirc_buf, sizeof(int), STREAMZAP_BUF_LEN))
-		goto kfree_lirc_buf;
-
-	delay_buf = kmalloc(sizeof(struct lirc_buffer), GFP_KERNEL);
-	if (!delay_buf)
-		goto free_lirc_buf;
-	if (lirc_buffer_init(delay_buf, sizeof(int), STREAMZAP_BUF_LEN))
-		goto kfree_delay_buf;
-
-	sz->driver = driver;
-	strcpy(sz->driver->name, DRIVER_NAME);
-	sz->driver->minor = -1;
-	sz->driver->sample_rate = 0;
-	sz->driver->code_length = sizeof(int) * 8;
-	sz->driver->features = LIRC_CAN_REC_MODE2 |
-		LIRC_CAN_GET_REC_RESOLUTION |
-		LIRC_CAN_SET_REC_TIMEOUT;
-	sz->driver->data = sz;
-	sz->driver->min_timeout = STREAMZAP_TIMEOUT * STREAMZAP_RESOLUTION;
-	sz->driver->max_timeout = STREAMZAP_TIMEOUT * STREAMZAP_RESOLUTION;
-	sz->driver->rbuf = lirc_buf;
-	sz->delay_buf = delay_buf;
-	sz->driver->set_use_inc = &streamzap_use_inc;
-	sz->driver->set_use_dec = &streamzap_use_dec;
-	sz->driver->fops = &streamzap_fops;
-	sz->driver->dev = &interface->dev;
-	sz->driver->owner = THIS_MODULE;
-
-	sz->idle = 1;
-	sz->decoder_state = PulseSpace;
-	init_timer(&sz->delay_timer);
-	sz->delay_timer.function = delay_timeout;
-	sz->delay_timer.data = (unsigned long) sz;
-	sz->timer_running = 0;
-	spin_lock_init(&sz->timer_lock);
-
-	init_timer(&sz->flush_timer);
-	sz->flush_timer.function = flush_timeout;
-	sz->flush_timer.data = (unsigned long) sz;
-	/* Complete final initialisations */
-
-	usb_fill_int_urb(sz->urb_in, udev,
-		usb_rcvintpipe(udev, sz->endpoint->bEndpointAddress),
-		sz->buf_in, sz->buf_in_len, usb_streamzap_irq, sz,
-		sz->endpoint->bInterval);
-	sz->urb_in->transfer_dma = sz->dma_in;
-	sz->urb_in->transfer_flags |= URB_NO_TRANSFER_DMA_MAP;
-
-	if (udev->descriptor.iManufacturer
-	    && usb_string(udev, udev->descriptor.iManufacturer,
-			  buf, sizeof(buf)) > 0)
-		strlcpy(name, buf, sizeof(name));
-
-	if (udev->descriptor.iProduct
-	    && usb_string(udev, udev->descriptor.iProduct,
-			  buf, sizeof(buf)) > 0)
-		snprintf(name + strlen(name), sizeof(name) - strlen(name),
-			 " %s", buf);
-
-	minor = lirc_register_driver(driver);
-
-	if (minor < 0)
-		goto free_delay_buf;
-
-	sz->driver->minor = minor;
-
-	usb_set_intfdata(interface, sz);
-
-	printk(KERN_INFO DRIVER_NAME "[%d]: %s on usb%d:%d attached\n",
-	       sz->driver->minor, name,
-	       udev->bus->busnum, sz->udev->devnum);
-
-	return 0;
-
-free_delay_buf:
-	lirc_buffer_free(sz->delay_buf);
-kfree_delay_buf:
-	kfree(delay_buf);
-free_lirc_buf:
-	lirc_buffer_free(sz->driver->rbuf);
-kfree_lirc_buf:
-	kfree(lirc_buf);
-free_driver:
-	kfree(driver);
-free_sz:
-	if (retval == -ENOMEM)
-		err("Out of memory");
-
-	if (sz) {
-		usb_free_urb(sz->urb_in);
-		usb_free_coherent(udev, sz->buf_in_len, sz->buf_in, sz->dma_in);
-		kfree(sz);
-	}
-
-	return retval;
-}
-
-static int streamzap_use_inc(void *data)
-{
-	struct usb_streamzap *sz = data;
-
-	if (!sz) {
-		dprintk("%s called with no context", -1, __func__);
-		return -EINVAL;
-	}
-	dprintk("set use inc", sz->driver->minor);
-
-	lirc_buffer_clear(sz->driver->rbuf);
-	lirc_buffer_clear(sz->delay_buf);
-
-	sz->flush_timer.expires = jiffies + HZ;
-	sz->flush = 1;
-	add_timer(&sz->flush_timer);
-
-	sz->urb_in->dev = sz->udev;
-	if (usb_submit_urb(sz->urb_in, GFP_ATOMIC)) {
-		dprintk("open result = -EIO error submitting urb",
-			sz->driver->minor);
-		return -EIO;
-	}
-	sz->in_use++;
-
-	return 0;
-}
-
-static void streamzap_use_dec(void *data)
-{
-	struct usb_streamzap *sz = data;
-
-	if (!sz) {
-		dprintk("%s called with no context", -1, __func__);
-		return;
-	}
-	dprintk("set use dec", sz->driver->minor);
-
-	if (sz->flush) {
-		sz->flush = 0;
-		del_timer_sync(&sz->flush_timer);
-	}
-
-	usb_kill_urb(sz->urb_in);
-
-	stop_timer(sz);
-
-	sz->in_use--;
-}
-
-static long streamzap_ioctl(struct file *filep, unsigned int cmd,
-			    unsigned long arg)
-{
-	int result = 0;
-	int val;
-	struct usb_streamzap *sz = lirc_get_pdata(filep);
-
-	switch (cmd) {
-	case LIRC_GET_REC_RESOLUTION:
-		result = put_user(STREAMZAP_RESOLUTION, (unsigned int *) arg);
-		break;
-	case LIRC_SET_REC_TIMEOUT:
-		result = get_user(val, (int *)arg);
-		if (result == 0) {
-			if (val == STREAMZAP_TIMEOUT * STREAMZAP_RESOLUTION)
-				sz->timeout_enabled = 1;
-			else if (val == 0)
-				sz->timeout_enabled = 0;
-			else
-				result = -EINVAL;
-		}
-		break;
-	default:
-		return lirc_dev_fop_ioctl(filep, cmd, arg);
-	}
-	return result;
-}
-
-/**
- * streamzap_disconnect
- *
- * Called by the usb core when the device is removed from the system.
- *
- * This routine guarantees that the driver will not submit any more urbs
- * by clearing dev->udev.  It is also supposed to terminate any currently
- * active urbs.  Unfortunately, usb_bulk_msg(), used in streamzap_read(),
- * does not provide any way to do this.
- */
-static void streamzap_disconnect(struct usb_interface *interface)
-{
-	struct usb_streamzap *sz;
-	int errnum;
-	int minor;
-
-	sz = usb_get_intfdata(interface);
-
-	/* unregister from the LIRC sub-system */
-
-	errnum = lirc_unregister_driver(sz->driver->minor);
-	if (errnum != 0)
-		dprintk("error in lirc_unregister: (returned %d)",
-			sz->driver->minor, errnum);
-
-	lirc_buffer_free(sz->delay_buf);
-	lirc_buffer_free(sz->driver->rbuf);
-
-	/* unregister from the USB sub-system */
-
-	usb_free_urb(sz->urb_in);
-
-	usb_free_coherent(sz->udev, sz->buf_in_len, sz->buf_in, sz->dma_in);
-
-	minor = sz->driver->minor;
-	kfree(sz->driver->rbuf);
-	kfree(sz->driver);
-	kfree(sz->delay_buf);
-	kfree(sz);
-
-	printk(KERN_INFO DRIVER_NAME "[%d]: disconnected\n", minor);
-}
-
-static int streamzap_suspend(struct usb_interface *intf, pm_message_t message)
-{
-	struct usb_streamzap *sz = usb_get_intfdata(intf);
-
-	printk(KERN_INFO DRIVER_NAME "[%d]: suspend\n", sz->driver->minor);
-	if (sz->in_use) {
-		if (sz->flush) {
-			sz->flush = 0;
-			del_timer_sync(&sz->flush_timer);
-		}
-
-		stop_timer(sz);
-
-		usb_kill_urb(sz->urb_in);
-	}
-	return 0;
-}
-
-static int streamzap_resume(struct usb_interface *intf)
-{
-	struct usb_streamzap *sz = usb_get_intfdata(intf);
-
-	lirc_buffer_clear(sz->driver->rbuf);
-	lirc_buffer_clear(sz->delay_buf);
-
-	if (sz->in_use) {
-		sz->flush_timer.expires = jiffies + HZ;
-		sz->flush = 1;
-		add_timer(&sz->flush_timer);
-
-		sz->urb_in->dev = sz->udev;
-		if (usb_submit_urb(sz->urb_in, GFP_ATOMIC)) {
-			dprintk("open result = -EIO error submitting urb",
-				sz->driver->minor);
-			return -EIO;
-		}
-	}
-	return 0;
-}
-
-/**
- *	usb_streamzap_init
- */
-static int __init usb_streamzap_init(void)
-{
-	int result;
-
-	/* register this driver with the USB subsystem */
-	result = usb_register(&streamzap_driver);
-
-	if (result) {
-		err("usb_register failed. Error number %d",
-		    result);
-		return result;
-	}
-
-	printk(KERN_INFO DRIVER_NAME " " DRIVER_VERSION " registered\n");
-	return 0;
-}
-
-/**
- *	usb_streamzap_exit
- */
-static void __exit usb_streamzap_exit(void)
-{
-	usb_deregister(&streamzap_driver);
-}
-
-
-module_init(usb_streamzap_init);
-module_exit(usb_streamzap_exit);
-
-MODULE_AUTHOR("Christoph Bartelmus, Greg Wickham, Adrian Dewhurst");
-MODULE_DESCRIPTION(DRIVER_DESC);
-MODULE_LICENSE("GPL");
-
-module_param(debug, bool, S_IRUGO | S_IWUSR);
-MODULE_PARM_DESC(debug, "Enable debugging messages");

include/linux/videodev2.h

@@ -277,6 +277,7 @@ struct v4l2_pix_format {
 #define V4L2_PIX_FMT_RGB565  v4l2_fourcc('R', 'G', 'B', 'P') /* 16  RGB-5-6-5     */
 #define V4L2_PIX_FMT_RGB555X v4l2_fourcc('R', 'G', 'B', 'Q') /* 16  RGB-5-5-5 BE  */
 #define V4L2_PIX_FMT_RGB565X v4l2_fourcc('R', 'G', 'B', 'R') /* 16  RGB-5-6-5 BE  */
+#define V4L2_PIX_FMT_BGR666  v4l2_fourcc('B', 'G', 'R', 'H') /* 18  BGR-6-6-6	  */
 #define V4L2_PIX_FMT_BGR24   v4l2_fourcc('B', 'G', 'R', '3') /* 24  BGR-8-8-8     */
 #define V4L2_PIX_FMT_RGB24   v4l2_fourcc('R', 'G', 'B', '3') /* 24  RGB-8-8-8     */
 #define V4L2_PIX_FMT_BGR32   v4l2_fourcc('B', 'G', 'R', '4') /* 32  BGR-8-8-8-8   */