Merge branch 'next/alchemy' into mips-for-linux-next

arch/mips/alchemy/Kconfig

@@ -2,6 +2,10 @@
 config ALCHEMY_GPIOINT_AU1000
 	bool
 
+# au1300-style GPIO/INT controller
+config ALCHEMY_GPIOINT_AU1300
+	bool
+
 # select this in your board config if you don't want to use the gpio
 # namespace as documented in the manuals.  In this case however you need
 # to create the necessary gpio_* functions in your board code/headers!
@@ -22,43 +26,29 @@ config MIPS_MTX1
 	select SYS_SUPPORTS_LITTLE_ENDIAN
 	select SYS_HAS_EARLY_PRINTK
 
-config MIPS_BOSPORUS
-	bool "Alchemy Bosporus board"
-	select ALCHEMY_GPIOINT_AU1000
-	select DMA_NONCOHERENT
-	select SYS_SUPPORTS_LITTLE_ENDIAN
-	select SYS_HAS_EARLY_PRINTK
-
 config MIPS_DB1000
-	bool "Alchemy DB1000 board"
+	bool "Alchemy DB1000/DB1500/DB1100 boards"
 	select ALCHEMY_GPIOINT_AU1000
 	select DMA_NONCOHERENT
 	select HW_HAS_PCI
-	select SYS_SUPPORTS_LITTLE_ENDIAN
-	select SYS_HAS_EARLY_PRINTK
-
-config MIPS_DB1100
-	bool "Alchemy DB1100 board"
-	select ALCHEMY_GPIOINT_AU1000
-	select DMA_NONCOHERENT
+	select MIPS_DISABLE_OBSOLETE_IDE
+	select SYS_SUPPORTS_BIG_ENDIAN
 	select SYS_SUPPORTS_LITTLE_ENDIAN
 	select SYS_HAS_EARLY_PRINTK
 
 config MIPS_DB1200
-	bool "Alchemy DB1200 board"
+	bool "Alchemy DB1200/PB1200 board"
 	select ALCHEMY_GPIOINT_AU1000
 	select DMA_COHERENT
 	select MIPS_DISABLE_OBSOLETE_IDE
 	select SYS_SUPPORTS_LITTLE_ENDIAN
 	select SYS_HAS_EARLY_PRINTK
 
-config MIPS_DB1500
-	bool "Alchemy DB1500 board"
-	select ALCHEMY_GPIOINT_AU1000
-	select DMA_NONCOHERENT
-	select HW_HAS_PCI
+config MIPS_DB1300
+	bool "NetLogic DB1300 board"
+	select ALCHEMY_GPIOINT_AU1300
+	select DMA_COHERENT
 	select MIPS_DISABLE_OBSOLETE_IDE
-	select SYS_SUPPORTS_BIG_ENDIAN
 	select SYS_SUPPORTS_LITTLE_ENDIAN
 	select SYS_HAS_EARLY_PRINTK
 
@@ -66,27 +56,11 @@ config MIPS_DB1550
 	bool "Alchemy DB1550 board"
 	select ALCHEMY_GPIOINT_AU1000
 	select HW_HAS_PCI
-	select DMA_NONCOHERENT
+	select DMA_COHERENT
 	select MIPS_DISABLE_OBSOLETE_IDE
 	select SYS_SUPPORTS_LITTLE_ENDIAN
 	select SYS_HAS_EARLY_PRINTK
 
-config MIPS_MIRAGE
-	bool "Alchemy Mirage board"
-	select DMA_NONCOHERENT
-	select ALCHEMY_GPIOINT_AU1000
-	select SYS_SUPPORTS_LITTLE_ENDIAN
-	select SYS_HAS_EARLY_PRINTK
-
-config MIPS_PB1000
-	bool "Alchemy PB1000 board"
-	select ALCHEMY_GPIOINT_AU1000
-	select DMA_NONCOHERENT
-	select HW_HAS_PCI
-	select SWAP_IO_SPACE
-	select SYS_SUPPORTS_LITTLE_ENDIAN
-	select SYS_HAS_EARLY_PRINTK
-
 config MIPS_PB1100
 	bool "Alchemy PB1100 board"
 	select ALCHEMY_GPIOINT_AU1000
@@ -96,14 +70,6 @@ config MIPS_PB1100
 	select SYS_SUPPORTS_LITTLE_ENDIAN
 	select SYS_HAS_EARLY_PRINTK
 
-config MIPS_PB1200
-	bool "Alchemy PB1200 board"
-	select ALCHEMY_GPIOINT_AU1000
-	select DMA_NONCOHERENT
-	select MIPS_DISABLE_OBSOLETE_IDE
-	select SYS_SUPPORTS_LITTLE_ENDIAN
-	select SYS_HAS_EARLY_PRINTK
-
 config MIPS_PB1500
 	bool "Alchemy PB1500 board"
 	select ALCHEMY_GPIOINT_AU1000

arch/mips/alchemy/Makefile

@@ -0,0 +1,3 @@
+obj-$(CONFIG_MIPS_GPR) += board-gpr.o
+obj-$(CONFIG_MIPS_MTX1) += board-mtx1.o
+obj-$(CONFIG_MIPS_XXS1500) += board-xxs1500.o

arch/mips/alchemy/Platform

@@ -4,62 +4,31 @@
 platform-$(CONFIG_MIPS_ALCHEMY)	+= alchemy/common/
 
 
-#
-# AMD Alchemy Pb1000 eval board
-#
-platform-$(CONFIG_MIPS_PB1000)	+= alchemy/devboards/
-cflags-$(CONFIG_MIPS_PB1000)	+= -I$(srctree)/arch/mips/include/asm/mach-pb1x00
-load-$(CONFIG_MIPS_PB1000)	+= 0xffffffff80100000
-
 #
 # AMD Alchemy Pb1100 eval board
 #
 platform-$(CONFIG_MIPS_PB1100)	+= alchemy/devboards/
-cflags-$(CONFIG_MIPS_PB1100)	+= -I$(srctree)/arch/mips/include/asm/mach-pb1x00
 load-$(CONFIG_MIPS_PB1100)	+= 0xffffffff80100000
 
 #
 # AMD Alchemy Pb1500 eval board
 #
 platform-$(CONFIG_MIPS_PB1500)	+= alchemy/devboards/
-cflags-$(CONFIG_MIPS_PB1500)	+= -I$(srctree)/arch/mips/include/asm/mach-pb1x00
 load-$(CONFIG_MIPS_PB1500)	+= 0xffffffff80100000
 
 #
 # AMD Alchemy Pb1550 eval board
 #
 platform-$(CONFIG_MIPS_PB1550)	+= alchemy/devboards/
-cflags-$(CONFIG_MIPS_PB1550)	+= -I$(srctree)/arch/mips/include/asm/mach-pb1x00
 load-$(CONFIG_MIPS_PB1550)	+= 0xffffffff80100000
 
 #
-# AMD Alchemy Pb1200 eval board
-#
-platform-$(CONFIG_MIPS_PB1200)	+= alchemy/devboards/
-cflags-$(CONFIG_MIPS_PB1200)	+= -I$(srctree)/arch/mips/include/asm/mach-pb1x00
-load-$(CONFIG_MIPS_PB1200)	+= 0xffffffff80100000
-
-#
-# AMD Alchemy Db1000 eval board
+# AMD Alchemy Db1000/Db1500/Db1100 eval boards
 #
 platform-$(CONFIG_MIPS_DB1000)	+= alchemy/devboards/
 cflags-$(CONFIG_MIPS_DB1000)	+= -I$(srctree)/arch/mips/include/asm/mach-db1x00
 load-$(CONFIG_MIPS_DB1000)	+= 0xffffffff80100000
 
-#
-# AMD Alchemy Db1100 eval board
-#
-platform-$(CONFIG_MIPS_DB1100)	+= alchemy/devboards/
-cflags-$(CONFIG_MIPS_DB1100)	+= -I$(srctree)/arch/mips/include/asm/mach-db1x00
-load-$(CONFIG_MIPS_DB1100)	+= 0xffffffff80100000
-
-#
-# AMD Alchemy Db1500 eval board
-#
-platform-$(CONFIG_MIPS_DB1500)	+= alchemy/devboards/
-cflags-$(CONFIG_MIPS_DB1500)	+= -I$(srctree)/arch/mips/include/asm/mach-db1x00
-load-$(CONFIG_MIPS_DB1500)	+= 0xffffffff80100000
-
 #
 # AMD Alchemy Db1550 eval board
 #
@@ -68,42 +37,35 @@ cflags-$(CONFIG_MIPS_DB1550)	+= -I$(srctree)/arch/mips/include/asm/mach-db1x00
 load-$(CONFIG_MIPS_DB1550)	+= 0xffffffff80100000
 
 #
-# AMD Alchemy Db1200 eval board
+# AMD Alchemy Db1200/Pb1200 eval boards
 #
 platform-$(CONFIG_MIPS_DB1200)	+= alchemy/devboards/
 cflags-$(CONFIG_MIPS_DB1200)	+= -I$(srctree)/arch/mips/include/asm/mach-db1x00
 load-$(CONFIG_MIPS_DB1200)	+= 0xffffffff80100000
 
 #
-# AMD Alchemy Bosporus eval board
-#
-platform-$(CONFIG_MIPS_BOSPORUS) += alchemy/devboards/
-cflags-$(CONFIG_MIPS_BOSPORUS)	 += -I$(srctree)/arch/mips/include/asm/mach-db1x00
-load-$(CONFIG_MIPS_BOSPORUS)	 += 0xffffffff80100000
-
-#
-# AMD Alchemy Mirage eval board
+# NetLogic DBAu1300 development platform
 #
-platform-$(CONFIG_MIPS_MIRAGE)	+= alchemy/devboards/
-cflags-$(CONFIG_MIPS_MIRAGE)	+= -I$(srctree)/arch/mips/include/asm/mach-db1x00
-load-$(CONFIG_MIPS_MIRAGE)	+= 0xffffffff80100000
+platform-$(CONFIG_MIPS_DB1300)	+= alchemy/devboards/
+cflags-$(CONFIG_MIPS_DB1300)	+= -I$(srctree)/arch/mips/include/asm/mach-db1x00
+load-$(CONFIG_MIPS_DB1300)	+= 0xffffffff80100000
 
 #
-# 4G-Systems eval board
+# 4G-Systems MTX-1 "MeshCube" wireless router
 #
-platform-$(CONFIG_MIPS_MTX1)	+= alchemy/mtx-1/
+platform-$(CONFIG_MIPS_MTX1)	+= alchemy/
 load-$(CONFIG_MIPS_MTX1)	+= 0xffffffff80100000
 
 #
 # MyCable eval board
 #
-platform-$(CONFIG_MIPS_XXS1500)	+= alchemy/xxs1500/
+platform-$(CONFIG_MIPS_XXS1500)	+= alchemy/
 load-$(CONFIG_MIPS_XXS1500)	+= 0xffffffff80100000
 
 #
 # Trapeze ITS GRP board
 #
-platform-$(CONFIG_MIPS_GPR)	+= alchemy/gpr/
+platform-$(CONFIG_MIPS_GPR)	+= alchemy/
 load-$(CONFIG_MIPS_GPR)		+= 0xffffffff80100000
 
 # boards can specify their own <gpio.h> in one of their include dirs.

arch/mips/alchemy/gpr/platform.c → arch/mips/alchemy/board-gpr.c

@@ -1,5 +1,5 @@
 /*
- * GPR board platform device registration
+ * GPR board platform device registration (Au1550)
  *
  * Copyright (C) 2010 Wolfgang Grandegger <wg@denx.de>
  *
@@ -18,16 +18,89 @@
  * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
  */
 
+#include <linux/delay.h>
 #include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/kernel.h>
 #include <linux/platform_device.h>
+#include <linux/pm.h>
 #include <linux/mtd/partitions.h>
 #include <linux/mtd/physmap.h>
 #include <linux/leds.h>
 #include <linux/gpio.h>
 #include <linux/i2c.h>
 #include <linux/i2c-gpio.h>
-
+#include <asm/bootinfo.h>
+#include <asm/reboot.h>
 #include <asm/mach-au1x00/au1000.h>
+#include <prom.h>
+
+const char *get_system_type(void)
+{
+	return "GPR";
+}
+
+void __init prom_init(void)
+{
+	unsigned char *memsize_str;
+	unsigned long memsize;
+
+	prom_argc = fw_arg0;
+	prom_argv = (char **)fw_arg1;
+	prom_envp = (char **)fw_arg2;
+
+	prom_init_cmdline();
+
+	memsize_str = prom_getenv("memsize");
+	if (!memsize_str)
+		memsize = 0x04000000;
+	else
+		strict_strtoul(memsize_str, 0, &memsize);
+	add_memory_region(0, memsize, BOOT_MEM_RAM);
+}
+
+void prom_putchar(unsigned char c)
+{
+	alchemy_uart_putchar(AU1000_UART0_PHYS_ADDR, c);
+}
+
+static void gpr_reset(char *c)
+{
+	/* switch System-LED to orange (red# and green# on) */
+	alchemy_gpio_direction_output(4, 0);
+	alchemy_gpio_direction_output(5, 0);
+
+	/* trigger watchdog to reset board in 200ms */
+	printk(KERN_EMERG "Triggering watchdog soft reset...\n");
+	raw_local_irq_disable();
+	alchemy_gpio_direction_output(1, 0);
+	udelay(1);
+	alchemy_gpio_set_value(1, 1);
+	while (1)
+		cpu_wait();
+}
+
+static void gpr_power_off(void)
+{
+	while (1)
+		cpu_wait();
+}
+
+void __init board_setup(void)
+{
+	printk(KERN_INFO "Trapeze ITS GPR board\n");
+
+	pm_power_off = gpr_power_off;
+	_machine_halt = gpr_power_off;
+	_machine_restart = gpr_reset;
+
+	/* Enable UART1/3 */
+	alchemy_uart_enable(AU1000_UART3_PHYS_ADDR);
+	alchemy_uart_enable(AU1000_UART1_PHYS_ADDR);
+
+	/* Take away Reset of UMTS-card */
+	alchemy_gpio_direction_output(215, 1);
+}
 
 /*
  * Watchdog
@@ -152,7 +225,7 @@ static struct i2c_gpio_platform_data gpr_i2c_data = {
 	.scl_is_open_drain	= 1,
 	.udelay			= 2,		/* ~100 kHz */
 	.timeout		= HZ,
- };
+};
 
 static struct platform_device gpr_i2c_device = {
 	.name			= "i2c-gpio",
@@ -184,7 +257,7 @@ static int gpr_map_pci_irq(const struct pci_dev *d, u8 slot, u8 pin)
 	else if ((slot == 0) && (pin == 2))
 		return AU1550_PCI_INTB;
 
-	return -1;
+	return 0xff;
 }
 
 static struct alchemy_pci_platdata gpr_pci_pd = {

arch/mips/alchemy/mtx-1/platform.c → arch/mips/alchemy/board-mtx1.c

@@ -1,5 +1,5 @@
 /*
- * MTX-1 platform devices registration
+ * MTX-1 platform devices registration (Au1500)
  *
  * Copyright (C) 2007-2009, Florian Fainelli <florian@openwrt.org>
  *
@@ -19,6 +19,8 @@
  */
 
 #include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/kernel.h>
 #include <linux/platform_device.h>
 #include <linux/leds.h>
 #include <linux/gpio.h>
@@ -27,8 +29,85 @@
 #include <linux/mtd/partitions.h>
 #include <linux/mtd/physmap.h>
 #include <mtd/mtd-abi.h>
-
+#include <asm/bootinfo.h>
+#include <asm/reboot.h>
+#include <asm/mach-au1x00/au1000.h>
 #include <asm/mach-au1x00/au1xxx_eth.h>
+#include <prom.h>
+
+const char *get_system_type(void)
+{
+	return "MTX-1";
+}
+
+void __init prom_init(void)
+{
+	unsigned char *memsize_str;
+	unsigned long memsize;
+
+	prom_argc = fw_arg0;
+	prom_argv = (char **)fw_arg1;
+	prom_envp = (char **)fw_arg2;
+
+	prom_init_cmdline();
+
+	memsize_str = prom_getenv("memsize");
+	if (!memsize_str)
+		memsize = 0x04000000;
+	else
+		strict_strtoul(memsize_str, 0, &memsize);
+	add_memory_region(0, memsize, BOOT_MEM_RAM);
+}
+
+void prom_putchar(unsigned char c)
+{
+	alchemy_uart_putchar(AU1000_UART0_PHYS_ADDR, c);
+}
+
+static void mtx1_reset(char *c)
+{
+	/* Jump to the reset vector */
+	__asm__ __volatile__("jr\t%0" : : "r"(0xbfc00000));
+}
+
+static void mtx1_power_off(void)
+{
+	while (1)
+		asm volatile (
+		"	.set	mips32					\n"
+		"	wait						\n"
+		"	.set	mips0					\n");
+}
+
+void __init board_setup(void)
+{
+#if defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE)
+	/* Enable USB power switch */
+	alchemy_gpio_direction_output(204, 0);
+#endif /* defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE) */
+
+	/* Initialize sys_pinfunc */
+	au_writel(SYS_PF_NI2, SYS_PINFUNC);
+
+	/* Initialize GPIO */
+	au_writel(~0, KSEG1ADDR(AU1000_SYS_PHYS_ADDR) + SYS_TRIOUTCLR);
+	alchemy_gpio_direction_output(0, 0);	/* Disable M66EN (PCI 66MHz) */
+	alchemy_gpio_direction_output(3, 1);	/* Disable PCI CLKRUN# */
+	alchemy_gpio_direction_output(1, 1);	/* Enable EXT_IO3 */
+	alchemy_gpio_direction_output(5, 0);	/* Disable eth PHY TX_ER */
+
+	/* Enable LED and set it to green */
+	alchemy_gpio_direction_output(211, 1);	/* green on */
+	alchemy_gpio_direction_output(212, 0);	/* red off */
+
+	pm_power_off = mtx1_power_off;
+	_machine_halt = mtx1_power_off;
+	_machine_restart = mtx1_reset;
+
+	printk(KERN_INFO "4G Systems MTX-1 Board\n");
+}
+
+/******************************************************************************/
 
 static struct gpio_keys_button mtx1_gpio_button[] = {
 	{
@@ -195,7 +274,6 @@ static struct platform_device mtx1_pci_host = {
 	.resource	= alchemy_pci_host_res,
 };
 
-
 static struct __initdata platform_device * mtx1_devs[] = {
 	&mtx1_pci_host,
 	&mtx1_gpio_leds,
@@ -206,13 +284,19 @@ static struct __initdata platform_device * mtx1_devs[] = {
 
 static struct au1000_eth_platform_data mtx1_au1000_eth0_pdata = {
 	.phy_search_highest_addr	= 1,
-	.phy1_search_mac0 		= 1,
+	.phy1_search_mac0		= 1,
 };
 
 static int __init mtx1_register_devices(void)
 {
 	int rc;
 
+	irq_set_irq_type(AU1500_GPIO204_INT, IRQ_TYPE_LEVEL_HIGH);
+	irq_set_irq_type(AU1500_GPIO201_INT, IRQ_TYPE_LEVEL_LOW);
+	irq_set_irq_type(AU1500_GPIO202_INT, IRQ_TYPE_LEVEL_LOW);
+	irq_set_irq_type(AU1500_GPIO203_INT, IRQ_TYPE_LEVEL_LOW);
+	irq_set_irq_type(AU1500_GPIO205_INT, IRQ_TYPE_LEVEL_LOW);
+
 	au1xxx_override_eth_cfg(0, &mtx1_au1000_eth0_pdata);
 
 	rc = gpio_request(mtx1_gpio_button[0].gpio,
@@ -226,5 +310,4 @@ static int __init mtx1_register_devices(void)
 out:
 	return platform_add_devices(mtx1_devs, ARRAY_SIZE(mtx1_devs));
 }
-
 arch_initcall(mtx1_register_devices);

arch/mips/alchemy/board-xxs1500.c

@@ -0,0 +1,154 @@
+/*
+ * BRIEF MODULE DESCRIPTION
+ *	MyCable XXS1500 board support
+ *
+ * Copyright 2003, 2008 MontaVista Software Inc.
+ * Author: MontaVista Software, Inc. <source@mvista.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/platform_device.h>
+#include <linux/gpio.h>
+#include <linux/delay.h>
+#include <linux/pm.h>
+#include <asm/bootinfo.h>
+#include <asm/reboot.h>
+#include <asm/mach-au1x00/au1000.h>
+#include <prom.h>
+
+const char *get_system_type(void)
+{
+	return "XXS1500";
+}
+
+void __init prom_init(void)
+{
+	unsigned char *memsize_str;
+	unsigned long memsize;
+
+	prom_argc = fw_arg0;
+	prom_argv = (char **)fw_arg1;
+	prom_envp = (char **)fw_arg2;
+
+	prom_init_cmdline();
+
+	memsize_str = prom_getenv("memsize");
+	if (!memsize_str || strict_strtoul(memsize_str, 0, &memsize))
+		memsize = 0x04000000;
+
+	add_memory_region(0, memsize, BOOT_MEM_RAM);
+}
+
+void prom_putchar(unsigned char c)
+{
+	alchemy_uart_putchar(AU1000_UART0_PHYS_ADDR, c);
+}
+
+static void xxs1500_reset(char *c)
+{
+	/* Jump to the reset vector */
+	__asm__ __volatile__("jr\t%0" : : "r"(0xbfc00000));
+}
+
+static void xxs1500_power_off(void)
+{
+	while (1)
+		asm volatile (
+		"	.set	mips32					\n"
+		"	wait						\n"
+		"	.set	mips0					\n");
+}
+
+void __init board_setup(void)
+{
+	u32 pin_func;
+
+	pm_power_off = xxs1500_power_off;
+	_machine_halt = xxs1500_power_off;
+	_machine_restart = xxs1500_reset;
+
+	alchemy_gpio1_input_enable();
+	alchemy_gpio2_enable();
+
+	/* Set multiple use pins (UART3/GPIO) to UART (it's used as UART too) */
+	pin_func  = au_readl(SYS_PINFUNC) & ~SYS_PF_UR3;
+	pin_func |= SYS_PF_UR3;
+	au_writel(pin_func, SYS_PINFUNC);
+
+	/* Enable UART */
+	alchemy_uart_enable(AU1000_UART3_PHYS_ADDR);
+	/* Enable DTR (MCR bit 0) = USB power up */
+	__raw_writel(1, (void __iomem *)KSEG1ADDR(AU1000_UART3_PHYS_ADDR + 0x18));
+	wmb();
+}
+
+/******************************************************************************/
+
+static struct resource xxs1500_pcmcia_res[] = {
+	{
+		.name	= "pcmcia-io",
+		.flags	= IORESOURCE_MEM,
+		.start	= AU1000_PCMCIA_IO_PHYS_ADDR,
+		.end	= AU1000_PCMCIA_IO_PHYS_ADDR + 0x000400000 - 1,
+	},
+	{
+		.name	= "pcmcia-attr",
+		.flags	= IORESOURCE_MEM,
+		.start	= AU1000_PCMCIA_ATTR_PHYS_ADDR,
+		.end	= AU1000_PCMCIA_ATTR_PHYS_ADDR + 0x000400000 - 1,
+	},
+	{
+		.name	= "pcmcia-mem",
+		.flags	= IORESOURCE_MEM,
+		.start	= AU1000_PCMCIA_MEM_PHYS_ADDR,
+		.end	= AU1000_PCMCIA_MEM_PHYS_ADDR + 0x000400000 - 1,
+	},
+};
+
+static struct platform_device xxs1500_pcmcia_dev = {
+	.name		= "xxs1500_pcmcia",
+	.id		= -1,
+	.num_resources	= ARRAY_SIZE(xxs1500_pcmcia_res),
+	.resource	= xxs1500_pcmcia_res,
+};
+
+static struct platform_device *xxs1500_devs[] __initdata = {
+	&xxs1500_pcmcia_dev,
+};
+
+static int __init xxs1500_dev_init(void)
+{
+	irq_set_irq_type(AU1500_GPIO204_INT, IRQ_TYPE_LEVEL_HIGH);
+	irq_set_irq_type(AU1500_GPIO201_INT, IRQ_TYPE_LEVEL_LOW);
+	irq_set_irq_type(AU1500_GPIO202_INT, IRQ_TYPE_LEVEL_LOW);
+	irq_set_irq_type(AU1500_GPIO203_INT, IRQ_TYPE_LEVEL_LOW);
+	irq_set_irq_type(AU1500_GPIO205_INT, IRQ_TYPE_LEVEL_LOW);
+	irq_set_irq_type(AU1500_GPIO207_INT, IRQ_TYPE_LEVEL_LOW);
+
+	irq_set_irq_type(AU1500_GPIO0_INT, IRQ_TYPE_LEVEL_LOW);
+	irq_set_irq_type(AU1500_GPIO1_INT, IRQ_TYPE_LEVEL_LOW);
+	irq_set_irq_type(AU1500_GPIO2_INT, IRQ_TYPE_LEVEL_LOW);
+	irq_set_irq_type(AU1500_GPIO3_INT, IRQ_TYPE_LEVEL_LOW);
+	irq_set_irq_type(AU1500_GPIO4_INT, IRQ_TYPE_LEVEL_LOW); /* CF irq */
+	irq_set_irq_type(AU1500_GPIO5_INT, IRQ_TYPE_LEVEL_LOW);
+
+	return platform_add_devices(xxs1500_devs,
+				    ARRAY_SIZE(xxs1500_devs));
+}
+device_initcall(xxs1500_dev_init);

arch/mips/alchemy/common/Makefile

@@ -6,9 +6,7 @@
 #
 
 obj-y += prom.o time.o clocks.o platform.o power.o setup.o \
-	sleeper.o dma.o dbdma.o
-
-obj-$(CONFIG_ALCHEMY_GPIOINT_AU1000) += irq.o
+	sleeper.o dma.o dbdma.o vss.o irq.o
 
 # optional gpiolib support
 ifeq ($(CONFIG_ALCHEMY_GPIO_INDIRECT),)

arch/mips/alchemy/common/dbdma.c

@@ -148,6 +148,50 @@ static dbdev_tab_t au1200_dbdev_tab[] __initdata = {
 	{ DSCR_CMD0_ALWAYS,   DEV_FLAGS_ANYUSE, 0, 0, 0x00000000, 0, 0 },
 };
 
+static dbdev_tab_t au1300_dbdev_tab[] __initdata = {
+	{ AU1300_DSCR_CMD0_UART0_TX, DEV_FLAGS_OUT, 0, 8,  0x10100004, 0, 0 },
+	{ AU1300_DSCR_CMD0_UART0_RX, DEV_FLAGS_IN,  0, 8,  0x10100000, 0, 0 },
+	{ AU1300_DSCR_CMD0_UART1_TX, DEV_FLAGS_OUT, 0, 8,  0x10101004, 0, 0 },
+	{ AU1300_DSCR_CMD0_UART1_RX, DEV_FLAGS_IN,  0, 8,  0x10101000, 0, 0 },
+	{ AU1300_DSCR_CMD0_UART2_TX, DEV_FLAGS_OUT, 0, 8,  0x10102004, 0, 0 },
+	{ AU1300_DSCR_CMD0_UART2_RX, DEV_FLAGS_IN,  0, 8,  0x10102000, 0, 0 },
+	{ AU1300_DSCR_CMD0_UART3_TX, DEV_FLAGS_OUT, 0, 8,  0x10103004, 0, 0 },
+	{ AU1300_DSCR_CMD0_UART3_RX, DEV_FLAGS_IN,  0, 8,  0x10103000, 0, 0 },
+
+	{ AU1300_DSCR_CMD0_SDMS_TX0, DEV_FLAGS_OUT, 4, 8,  0x10600000, 0, 0 },
+	{ AU1300_DSCR_CMD0_SDMS_RX0, DEV_FLAGS_IN,  4, 8,  0x10600004, 0, 0 },
+	{ AU1300_DSCR_CMD0_SDMS_TX1, DEV_FLAGS_OUT, 8, 8,  0x10601000, 0, 0 },
+	{ AU1300_DSCR_CMD0_SDMS_RX1, DEV_FLAGS_IN,  8, 8,  0x10601004, 0, 0 },
+
+	{ AU1300_DSCR_CMD0_AES_RX, DEV_FLAGS_IN ,   4, 32, 0x10300008, 0, 0 },
+	{ AU1300_DSCR_CMD0_AES_TX, DEV_FLAGS_OUT,   4, 32, 0x10300004, 0, 0 },
+
+	{ AU1300_DSCR_CMD0_PSC0_TX, DEV_FLAGS_OUT,  0, 16, 0x10a0001c, 0, 0 },
+	{ AU1300_DSCR_CMD0_PSC0_RX, DEV_FLAGS_IN,   0, 16, 0x10a0001c, 0, 0 },
+	{ AU1300_DSCR_CMD0_PSC1_TX, DEV_FLAGS_OUT,  0, 16, 0x10a0101c, 0, 0 },
+	{ AU1300_DSCR_CMD0_PSC1_RX, DEV_FLAGS_IN,   0, 16, 0x10a0101c, 0, 0 },
+	{ AU1300_DSCR_CMD0_PSC2_TX, DEV_FLAGS_OUT,  0, 16, 0x10a0201c, 0, 0 },
+	{ AU1300_DSCR_CMD0_PSC2_RX, DEV_FLAGS_IN,   0, 16, 0x10a0201c, 0, 0 },
+	{ AU1300_DSCR_CMD0_PSC3_TX, DEV_FLAGS_OUT,  0, 16, 0x10a0301c, 0, 0 },
+	{ AU1300_DSCR_CMD0_PSC3_RX, DEV_FLAGS_IN,   0, 16, 0x10a0301c, 0, 0 },
+
+	{ AU1300_DSCR_CMD0_LCD, DEV_FLAGS_ANYUSE,   0, 0,  0x00000000, 0, 0 },
+	{ AU1300_DSCR_CMD0_NAND_FLASH, DEV_FLAGS_IN, 0, 0, 0x00000000, 0, 0 },
+
+	{ AU1300_DSCR_CMD0_SDMS_TX2, DEV_FLAGS_OUT, 4, 8,  0x10602000, 0, 0 },
+	{ AU1300_DSCR_CMD0_SDMS_RX2, DEV_FLAGS_IN,  4, 8,  0x10602004, 0, 0 },
+
+	{ AU1300_DSCR_CMD0_CIM_SYNC, DEV_FLAGS_ANYUSE, 0, 0, 0x00000000, 0, 0 },
+
+	{ AU1300_DSCR_CMD0_UDMA, DEV_FLAGS_ANYUSE,  0, 32, 0x14001810, 0, 0 },
+
+	{ AU1300_DSCR_CMD0_DMA_REQ0, 0, 0, 0, 0x00000000, 0, 0 },
+	{ AU1300_DSCR_CMD0_DMA_REQ1, 0, 0, 0, 0x00000000, 0, 0 },
+
+	{ DSCR_CMD0_THROTTLE, DEV_FLAGS_ANYUSE, 0, 0, 0x00000000, 0, 0 },
+	{ DSCR_CMD0_ALWAYS,   DEV_FLAGS_ANYUSE, 0, 0, 0x00000000, 0, 0 },
+};
+
 /* 32 predefined plus 32 custom */
 #define DBDEV_TAB_SIZE		64
 
@@ -1037,6 +1081,8 @@ static int __init alchemy_dbdma_init(void)
 		return dbdma_setup(AU1550_DDMA_INT, au1550_dbdev_tab);
 	case ALCHEMY_CPU_AU1200:
 		return dbdma_setup(AU1200_DDMA_INT, au1200_dbdev_tab);
+	case ALCHEMY_CPU_AU1300:
+		return dbdma_setup(AU1300_DDMA_INT, au1300_dbdev_tab);
 	}
 	return 0;
 }

arch/mips/alchemy/common/gpiolib.c

@@ -27,6 +27,7 @@
  *	 CONFIG_ALCHEMY_GPIO_INDIRECT=n, otherwise compilation will fail!
  *	au1000 SoC have only one GPIO block : GPIO1
  *	Au1100, Au15x0, Au12x0 have a second one : GPIO2
+ *	Au1300 is totally different: 1 block with up to 128 GPIOs
  */
 
 #include <linux/init.h>
@@ -35,6 +36,7 @@
 #include <linux/types.h>
 #include <linux/gpio.h>
 #include <asm/mach-au1x00/gpio-au1000.h>
+#include <asm/mach-au1x00/gpio-au1300.h>
 
 static int gpio2_get(struct gpio_chip *chip, unsigned offset)
 {
@@ -115,6 +117,43 @@ struct gpio_chip alchemy_gpio_chip[] = {
 	},
 };
 
+static int alchemy_gpic_get(struct gpio_chip *chip, unsigned int off)
+{
+	return au1300_gpio_get_value(off + AU1300_GPIO_BASE);
+}
+
+static void alchemy_gpic_set(struct gpio_chip *chip, unsigned int off, int v)
+{
+	au1300_gpio_set_value(off + AU1300_GPIO_BASE, v);
+}
+
+static int alchemy_gpic_dir_input(struct gpio_chip *chip, unsigned int off)
+{
+	return au1300_gpio_direction_input(off + AU1300_GPIO_BASE);
+}
+
+static int alchemy_gpic_dir_output(struct gpio_chip *chip, unsigned int off,
+				   int v)
+{
+	return au1300_gpio_direction_output(off + AU1300_GPIO_BASE, v);
+}
+
+static int alchemy_gpic_gpio_to_irq(struct gpio_chip *chip, unsigned int off)
+{
+	return au1300_gpio_to_irq(off + AU1300_GPIO_BASE);
+}
+
+static struct gpio_chip au1300_gpiochip = {
+	.label			= "alchemy-gpic",
+	.direction_input	= alchemy_gpic_dir_input,
+	.direction_output	= alchemy_gpic_dir_output,
+	.get			= alchemy_gpic_get,
+	.set			= alchemy_gpic_set,
+	.to_irq			= alchemy_gpic_gpio_to_irq,
+	.base			= AU1300_GPIO_BASE,
+	.ngpio			= AU1300_GPIO_NUM,
+};
+
 static int __init alchemy_gpiochip_init(void)
 {
 	int ret = 0;
@@ -127,6 +166,9 @@ static int __init alchemy_gpiochip_init(void)
 		ret = gpiochip_add(&alchemy_gpio_chip[0]);
 		ret |= gpiochip_add(&alchemy_gpio_chip[1]);
 		break;
+	case ALCHEMY_CPU_AU1300:
+		ret = gpiochip_add(&au1300_gpiochip);
+		break;
 	}
 	return ret;
 }

arch/mips/alchemy/common/irq.c

@@ -25,19 +25,15 @@
  *  675 Mass Ave, Cambridge, MA 02139, USA.
  */
 
-#include <linux/bitops.h>
+#include <linux/export.h>
 #include <linux/init.h>
 #include <linux/interrupt.h>
-#include <linux/irq.h>
 #include <linux/slab.h>
 #include <linux/syscore_ops.h>
 
 #include <asm/irq_cpu.h>
-#include <asm/mipsregs.h>
 #include <asm/mach-au1x00/au1000.h>
-#ifdef CONFIG_MIPS_PB1000
-#include <asm/mach-pb1x00/pb1000.h>
-#endif
+#include <asm/mach-au1x00/gpio-au1300.h>
 
 /* Interrupt Controller register offsets */
 #define IC_CFG0RD	0x40
@@ -69,7 +65,17 @@
 #define IC_FALLINGCLR	0x7C
 #define IC_TESTBIT	0x80
 
-static int au1x_ic_settype(struct irq_data *d, unsigned int flow_type);
+/* per-processor fixed function irqs */
+struct alchemy_irqmap {
+	int irq;	/* linux IRQ number */
+	int type;	/* IRQ_TYPE_ */
+	int prio;	/* irq priority, 0 highest, 3 lowest */
+	int internal;	/* GPIC: internal source (no ext. pin)? */
+};
+
+static int au1x_ic_settype(struct irq_data *d, unsigned int type);
+static int au1300_gpic_settype(struct irq_data *d, unsigned int type);
+
 
 /* NOTE on interrupt priorities: The original writers of this code said:
  *
@@ -77,176 +83,207 @@ static int au1x_ic_settype(struct irq_data *d, unsigned int flow_type);
  * the USB devices-side packet complete interrupt (USB_DEV_REQ_INT)
  * needs the highest priority.
  */
-
-/* per-processor fixed function irqs */
-struct au1xxx_irqmap {
-	int im_irq;
-	int im_type;
-	int im_request;		/* set 1 to get higher priority */
+struct alchemy_irqmap au1000_irqmap[] __initdata = {
+	{ AU1000_UART0_INT,	  IRQ_TYPE_LEVEL_HIGH,  1, 0 },
+	{ AU1000_UART1_INT,	  IRQ_TYPE_LEVEL_HIGH,  1, 0 },
+	{ AU1000_UART2_INT,	  IRQ_TYPE_LEVEL_HIGH,  1, 0 },
+	{ AU1000_UART3_INT,	  IRQ_TYPE_LEVEL_HIGH,  1, 0 },
+	{ AU1000_SSI0_INT,	  IRQ_TYPE_LEVEL_HIGH,  1, 0 },
+	{ AU1000_SSI1_INT,	  IRQ_TYPE_LEVEL_HIGH,  1, 0 },
+	{ AU1000_DMA_INT_BASE,	  IRQ_TYPE_LEVEL_HIGH,  1, 0 },
+	{ AU1000_DMA_INT_BASE+1,  IRQ_TYPE_LEVEL_HIGH,  1, 0 },
+	{ AU1000_DMA_INT_BASE+2,  IRQ_TYPE_LEVEL_HIGH,  1, 0 },
+	{ AU1000_DMA_INT_BASE+3,  IRQ_TYPE_LEVEL_HIGH,  1, 0 },
+	{ AU1000_DMA_INT_BASE+4,  IRQ_TYPE_LEVEL_HIGH,  1, 0 },
+	{ AU1000_DMA_INT_BASE+5,  IRQ_TYPE_LEVEL_HIGH,  1, 0 },
+	{ AU1000_DMA_INT_BASE+6,  IRQ_TYPE_LEVEL_HIGH,  1, 0 },
+	{ AU1000_DMA_INT_BASE+7,  IRQ_TYPE_LEVEL_HIGH,  1, 0 },
+	{ AU1000_TOY_INT,	  IRQ_TYPE_EDGE_RISING, 1, 0 },
+	{ AU1000_TOY_MATCH0_INT,  IRQ_TYPE_EDGE_RISING, 1, 0 },
+	{ AU1000_TOY_MATCH1_INT,  IRQ_TYPE_EDGE_RISING, 1, 0 },
+	{ AU1000_TOY_MATCH2_INT,  IRQ_TYPE_EDGE_RISING, 1, 0 },
+	{ AU1000_RTC_INT,	  IRQ_TYPE_EDGE_RISING, 1, 0 },
+	{ AU1000_RTC_MATCH0_INT,  IRQ_TYPE_EDGE_RISING, 1, 0 },
+	{ AU1000_RTC_MATCH1_INT,  IRQ_TYPE_EDGE_RISING, 1, 0 },
+	{ AU1000_RTC_MATCH2_INT,  IRQ_TYPE_EDGE_RISING, 0, 0 },
+	{ AU1000_IRDA_TX_INT,	  IRQ_TYPE_LEVEL_HIGH,  1, 0 },
+	{ AU1000_IRDA_RX_INT,	  IRQ_TYPE_LEVEL_HIGH,  1, 0 },
+	{ AU1000_USB_DEV_REQ_INT, IRQ_TYPE_LEVEL_HIGH,  0, 0 },
+	{ AU1000_USB_DEV_SUS_INT, IRQ_TYPE_EDGE_RISING, 1, 0 },
+	{ AU1000_USB_HOST_INT,	  IRQ_TYPE_LEVEL_LOW,   1, 0 },
+	{ AU1000_ACSYNC_INT,	  IRQ_TYPE_EDGE_RISING, 1, 0 },
+	{ AU1000_MAC0_DMA_INT,	  IRQ_TYPE_LEVEL_HIGH,  1, 0 },
+	{ AU1000_MAC1_DMA_INT,	  IRQ_TYPE_LEVEL_HIGH,  1, 0 },
+	{ AU1000_AC97C_INT,	  IRQ_TYPE_EDGE_RISING, 1, 0 },
+	{ -1, },
 };
 
-struct au1xxx_irqmap au1000_irqmap[] __initdata = {
-	{ AU1000_UART0_INT,	  IRQ_TYPE_LEVEL_HIGH,  0 },
-	{ AU1000_UART1_INT,	  IRQ_TYPE_LEVEL_HIGH,  0 },
-	{ AU1000_UART2_INT,	  IRQ_TYPE_LEVEL_HIGH,  0 },
-	{ AU1000_UART3_INT,	  IRQ_TYPE_LEVEL_HIGH,  0 },
-	{ AU1000_SSI0_INT,	  IRQ_TYPE_LEVEL_HIGH,  0 },
-	{ AU1000_SSI1_INT,	  IRQ_TYPE_LEVEL_HIGH,  0 },
-	{ AU1000_DMA_INT_BASE,	  IRQ_TYPE_LEVEL_HIGH,  0 },
-	{ AU1000_DMA_INT_BASE+1,  IRQ_TYPE_LEVEL_HIGH,  0 },
-	{ AU1000_DMA_INT_BASE+2,  IRQ_TYPE_LEVEL_HIGH,  0 },
-	{ AU1000_DMA_INT_BASE+3,  IRQ_TYPE_LEVEL_HIGH,  0 },
-	{ AU1000_DMA_INT_BASE+4,  IRQ_TYPE_LEVEL_HIGH,  0 },
-	{ AU1000_DMA_INT_BASE+5,  IRQ_TYPE_LEVEL_HIGH,  0 },
-	{ AU1000_DMA_INT_BASE+6,  IRQ_TYPE_LEVEL_HIGH,  0 },
-	{ AU1000_DMA_INT_BASE+7,  IRQ_TYPE_LEVEL_HIGH,  0 },
-	{ AU1000_TOY_INT,	  IRQ_TYPE_EDGE_RISING, 0 },
-	{ AU1000_TOY_MATCH0_INT,  IRQ_TYPE_EDGE_RISING, 0 },
-	{ AU1000_TOY_MATCH1_INT,  IRQ_TYPE_EDGE_RISING, 0 },
-	{ AU1000_TOY_MATCH2_INT,  IRQ_TYPE_EDGE_RISING, 0 },
-	{ AU1000_RTC_INT,	  IRQ_TYPE_EDGE_RISING, 0 },
-	{ AU1000_RTC_MATCH0_INT,  IRQ_TYPE_EDGE_RISING, 0 },
-	{ AU1000_RTC_MATCH1_INT,  IRQ_TYPE_EDGE_RISING, 0 },
-	{ AU1000_RTC_MATCH2_INT,  IRQ_TYPE_EDGE_RISING, 1 },
-	{ AU1000_IRDA_TX_INT,	  IRQ_TYPE_LEVEL_HIGH,  0 },
-	{ AU1000_IRDA_RX_INT,	  IRQ_TYPE_LEVEL_HIGH,  0 },
-	{ AU1000_USB_DEV_REQ_INT, IRQ_TYPE_LEVEL_HIGH,  1 },
-	{ AU1000_USB_DEV_SUS_INT, IRQ_TYPE_EDGE_RISING, 0 },
-	{ AU1000_USB_HOST_INT,	  IRQ_TYPE_LEVEL_LOW,   0 },
-	{ AU1000_ACSYNC_INT,	  IRQ_TYPE_EDGE_RISING, 0 },
-	{ AU1000_MAC0_DMA_INT,	  IRQ_TYPE_LEVEL_HIGH,  0 },
-	{ AU1000_MAC1_DMA_INT,	  IRQ_TYPE_LEVEL_HIGH,  0 },
-	{ AU1000_AC97C_INT,	  IRQ_TYPE_EDGE_RISING, 0 },
+struct alchemy_irqmap au1500_irqmap[] __initdata = {
+	{ AU1500_UART0_INT,	  IRQ_TYPE_LEVEL_HIGH,  1, 0 },
+	{ AU1500_PCI_INTA,	  IRQ_TYPE_LEVEL_LOW,   1, 0 },
+	{ AU1500_PCI_INTB,	  IRQ_TYPE_LEVEL_LOW,   1, 0 },
+	{ AU1500_UART3_INT,	  IRQ_TYPE_LEVEL_HIGH,  1, 0 },
+	{ AU1500_PCI_INTC,	  IRQ_TYPE_LEVEL_LOW,   1, 0 },
+	{ AU1500_PCI_INTD,	  IRQ_TYPE_LEVEL_LOW,   1, 0 },
+	{ AU1500_DMA_INT_BASE,	  IRQ_TYPE_LEVEL_HIGH,  1, 0 },
+	{ AU1500_DMA_INT_BASE+1,  IRQ_TYPE_LEVEL_HIGH,  1, 0 },
+	{ AU1500_DMA_INT_BASE+2,  IRQ_TYPE_LEVEL_HIGH,  1, 0 },
+	{ AU1500_DMA_INT_BASE+3,  IRQ_TYPE_LEVEL_HIGH,  1, 0 },
+	{ AU1500_DMA_INT_BASE+4,  IRQ_TYPE_LEVEL_HIGH,  1, 0 },
+	{ AU1500_DMA_INT_BASE+5,  IRQ_TYPE_LEVEL_HIGH,  1, 0 },
+	{ AU1500_DMA_INT_BASE+6,  IRQ_TYPE_LEVEL_HIGH,  1, 0 },
+	{ AU1500_DMA_INT_BASE+7,  IRQ_TYPE_LEVEL_HIGH,  1, 0 },
+	{ AU1500_TOY_INT,	  IRQ_TYPE_EDGE_RISING, 1, 0 },
+	{ AU1500_TOY_MATCH0_INT,  IRQ_TYPE_EDGE_RISING, 1, 0 },
+	{ AU1500_TOY_MATCH1_INT,  IRQ_TYPE_EDGE_RISING, 1, 0 },
+	{ AU1500_TOY_MATCH2_INT,  IRQ_TYPE_EDGE_RISING, 1, 0 },
+	{ AU1500_RTC_INT,	  IRQ_TYPE_EDGE_RISING, 1, 0 },
+	{ AU1500_RTC_MATCH0_INT,  IRQ_TYPE_EDGE_RISING, 1, 0 },
+	{ AU1500_RTC_MATCH1_INT,  IRQ_TYPE_EDGE_RISING, 1, 0 },
+	{ AU1500_RTC_MATCH2_INT,  IRQ_TYPE_EDGE_RISING, 0, 0 },
+	{ AU1500_USB_DEV_REQ_INT, IRQ_TYPE_LEVEL_HIGH,  0, 0 },
+	{ AU1500_USB_DEV_SUS_INT, IRQ_TYPE_EDGE_RISING, 1, 0 },
+	{ AU1500_USB_HOST_INT,	  IRQ_TYPE_LEVEL_LOW,   1, 0 },
+	{ AU1500_ACSYNC_INT,	  IRQ_TYPE_EDGE_RISING, 1, 0 },
+	{ AU1500_MAC0_DMA_INT,	  IRQ_TYPE_LEVEL_HIGH,  1, 0 },
+	{ AU1500_MAC1_DMA_INT,	  IRQ_TYPE_LEVEL_HIGH,  1, 0 },
+	{ AU1500_AC97C_INT,	  IRQ_TYPE_EDGE_RISING, 1, 0 },
 	{ -1, },
 };
 
-struct au1xxx_irqmap au1500_irqmap[] __initdata = {
-	{ AU1500_UART0_INT,	  IRQ_TYPE_LEVEL_HIGH,  0 },
-	{ AU1500_PCI_INTA,	  IRQ_TYPE_LEVEL_LOW,   0 },
-	{ AU1500_PCI_INTB,	  IRQ_TYPE_LEVEL_LOW,   0 },
-	{ AU1500_UART3_INT,	  IRQ_TYPE_LEVEL_HIGH,  0 },
-	{ AU1500_PCI_INTC,	  IRQ_TYPE_LEVEL_LOW,   0 },
-	{ AU1500_PCI_INTD,	  IRQ_TYPE_LEVEL_LOW,   0 },
-	{ AU1500_DMA_INT_BASE,	  IRQ_TYPE_LEVEL_HIGH,  0 },
-	{ AU1500_DMA_INT_BASE+1,  IRQ_TYPE_LEVEL_HIGH,  0 },
-	{ AU1500_DMA_INT_BASE+2,  IRQ_TYPE_LEVEL_HIGH,  0 },
-	{ AU1500_DMA_INT_BASE+3,  IRQ_TYPE_LEVEL_HIGH,  0 },
-	{ AU1500_DMA_INT_BASE+4,  IRQ_TYPE_LEVEL_HIGH,  0 },
-	{ AU1500_DMA_INT_BASE+5,  IRQ_TYPE_LEVEL_HIGH,  0 },
-	{ AU1500_DMA_INT_BASE+6,  IRQ_TYPE_LEVEL_HIGH,  0 },
-	{ AU1500_DMA_INT_BASE+7,  IRQ_TYPE_LEVEL_HIGH,  0 },
-	{ AU1500_TOY_INT,	  IRQ_TYPE_EDGE_RISING, 0 },
-	{ AU1500_TOY_MATCH0_INT,  IRQ_TYPE_EDGE_RISING, 0 },
-	{ AU1500_TOY_MATCH1_INT,  IRQ_TYPE_EDGE_RISING, 0 },
-	{ AU1500_TOY_MATCH2_INT,  IRQ_TYPE_EDGE_RISING, 0 },
-	{ AU1500_RTC_INT,	  IRQ_TYPE_EDGE_RISING, 0 },
-	{ AU1500_RTC_MATCH0_INT,  IRQ_TYPE_EDGE_RISING, 0 },
-	{ AU1500_RTC_MATCH1_INT,  IRQ_TYPE_EDGE_RISING, 0 },
-	{ AU1500_RTC_MATCH2_INT,  IRQ_TYPE_EDGE_RISING, 1 },
-	{ AU1500_USB_DEV_REQ_INT, IRQ_TYPE_LEVEL_HIGH,  1 },
-	{ AU1500_USB_DEV_SUS_INT, IRQ_TYPE_EDGE_RISING, 0 },
-	{ AU1500_USB_HOST_INT,	  IRQ_TYPE_LEVEL_LOW,   0 },
-	{ AU1500_ACSYNC_INT,	  IRQ_TYPE_EDGE_RISING, 0 },
-	{ AU1500_MAC0_DMA_INT,	  IRQ_TYPE_LEVEL_HIGH,  0 },
-	{ AU1500_MAC1_DMA_INT,	  IRQ_TYPE_LEVEL_HIGH,  0 },
-	{ AU1500_AC97C_INT,	  IRQ_TYPE_EDGE_RISING, 0 },
+struct alchemy_irqmap au1100_irqmap[] __initdata = {
+	{ AU1100_UART0_INT,	  IRQ_TYPE_LEVEL_HIGH,  1, 0 },
+	{ AU1100_UART1_INT,	  IRQ_TYPE_LEVEL_HIGH,  1, 0 },
+	{ AU1100_SD_INT,	  IRQ_TYPE_LEVEL_HIGH,  1, 0 },
+	{ AU1100_UART3_INT,	  IRQ_TYPE_LEVEL_HIGH,  1, 0 },
+	{ AU1100_SSI0_INT,	  IRQ_TYPE_LEVEL_HIGH,  1, 0 },
+	{ AU1100_SSI1_INT,	  IRQ_TYPE_LEVEL_HIGH,  1, 0 },
+	{ AU1100_DMA_INT_BASE,	  IRQ_TYPE_LEVEL_HIGH,  1, 0 },
+	{ AU1100_DMA_INT_BASE+1,  IRQ_TYPE_LEVEL_HIGH,  1, 0 },
+	{ AU1100_DMA_INT_BASE+2,  IRQ_TYPE_LEVEL_HIGH,  1, 0 },
+	{ AU1100_DMA_INT_BASE+3,  IRQ_TYPE_LEVEL_HIGH,  1, 0 },
+	{ AU1100_DMA_INT_BASE+4,  IRQ_TYPE_LEVEL_HIGH,  1, 0 },
+	{ AU1100_DMA_INT_BASE+5,  IRQ_TYPE_LEVEL_HIGH,  1, 0 },
+	{ AU1100_DMA_INT_BASE+6,  IRQ_TYPE_LEVEL_HIGH,  1, 0 },
+	{ AU1100_DMA_INT_BASE+7,  IRQ_TYPE_LEVEL_HIGH,  1, 0 },
+	{ AU1100_TOY_INT,	  IRQ_TYPE_EDGE_RISING, 1, 0 },
+	{ AU1100_TOY_MATCH0_INT,  IRQ_TYPE_EDGE_RISING, 1, 0 },
+	{ AU1100_TOY_MATCH1_INT,  IRQ_TYPE_EDGE_RISING, 1, 0 },
+	{ AU1100_TOY_MATCH2_INT,  IRQ_TYPE_EDGE_RISING, 1, 0 },
+	{ AU1100_RTC_INT,	  IRQ_TYPE_EDGE_RISING, 1, 0 },
+	{ AU1100_RTC_MATCH0_INT,  IRQ_TYPE_EDGE_RISING, 1, 0 },
+	{ AU1100_RTC_MATCH1_INT,  IRQ_TYPE_EDGE_RISING, 1, 0 },
+	{ AU1100_RTC_MATCH2_INT,  IRQ_TYPE_EDGE_RISING, 0, 0 },
+	{ AU1100_IRDA_TX_INT,	  IRQ_TYPE_LEVEL_HIGH,  1, 0 },
+	{ AU1100_IRDA_RX_INT,	  IRQ_TYPE_LEVEL_HIGH,  1, 0 },
+	{ AU1100_USB_DEV_REQ_INT, IRQ_TYPE_LEVEL_HIGH,  0, 0 },
+	{ AU1100_USB_DEV_SUS_INT, IRQ_TYPE_EDGE_RISING, 1, 0 },
+	{ AU1100_USB_HOST_INT,	  IRQ_TYPE_LEVEL_LOW,   1, 0 },
+	{ AU1100_ACSYNC_INT,	  IRQ_TYPE_EDGE_RISING, 1, 0 },
+	{ AU1100_MAC0_DMA_INT,	  IRQ_TYPE_LEVEL_HIGH,  1, 0 },
+	{ AU1100_LCD_INT,	  IRQ_TYPE_LEVEL_HIGH,  1, 0 },
+	{ AU1100_AC97C_INT,	  IRQ_TYPE_EDGE_RISING, 1, 0 },
 	{ -1, },
 };
 
-struct au1xxx_irqmap au1100_irqmap[] __initdata = {
-	{ AU1100_UART0_INT,	  IRQ_TYPE_LEVEL_HIGH,  0 },
-	{ AU1100_UART1_INT,	  IRQ_TYPE_LEVEL_HIGH,  0 },
-	{ AU1100_SD_INT,	  IRQ_TYPE_LEVEL_HIGH,  0 },
-	{ AU1100_UART3_INT,	  IRQ_TYPE_LEVEL_HIGH,  0 },
-	{ AU1100_SSI0_INT,	  IRQ_TYPE_LEVEL_HIGH,  0 },
-	{ AU1100_SSI1_INT,	  IRQ_TYPE_LEVEL_HIGH,  0 },
-	{ AU1100_DMA_INT_BASE,	  IRQ_TYPE_LEVEL_HIGH,  0 },
-	{ AU1100_DMA_INT_BASE+1,  IRQ_TYPE_LEVEL_HIGH,  0 },
-	{ AU1100_DMA_INT_BASE+2,  IRQ_TYPE_LEVEL_HIGH,  0 },
-	{ AU1100_DMA_INT_BASE+3,  IRQ_TYPE_LEVEL_HIGH,  0 },
-	{ AU1100_DMA_INT_BASE+4,  IRQ_TYPE_LEVEL_HIGH,  0 },
-	{ AU1100_DMA_INT_BASE+5,  IRQ_TYPE_LEVEL_HIGH,  0 },
-	{ AU1100_DMA_INT_BASE+6,  IRQ_TYPE_LEVEL_HIGH,  0 },
-	{ AU1100_DMA_INT_BASE+7,  IRQ_TYPE_LEVEL_HIGH,  0 },
-	{ AU1100_TOY_INT,	  IRQ_TYPE_EDGE_RISING, 0 },
-	{ AU1100_TOY_MATCH0_INT,  IRQ_TYPE_EDGE_RISING, 0 },
-	{ AU1100_TOY_MATCH1_INT,  IRQ_TYPE_EDGE_RISING, 0 },
-	{ AU1100_TOY_MATCH2_INT,  IRQ_TYPE_EDGE_RISING, 0 },
-	{ AU1100_RTC_INT,	  IRQ_TYPE_EDGE_RISING, 0 },
-	{ AU1100_RTC_MATCH0_INT,  IRQ_TYPE_EDGE_RISING, 0 },
-	{ AU1100_RTC_MATCH1_INT,  IRQ_TYPE_EDGE_RISING, 0 },
-	{ AU1100_RTC_MATCH2_INT,  IRQ_TYPE_EDGE_RISING, 1 },
-	{ AU1100_IRDA_TX_INT,	  IRQ_TYPE_LEVEL_HIGH,  0 },
-	{ AU1100_IRDA_RX_INT,	  IRQ_TYPE_LEVEL_HIGH,  0 },
-	{ AU1100_USB_DEV_REQ_INT, IRQ_TYPE_LEVEL_HIGH,  1 },
-	{ AU1100_USB_DEV_SUS_INT, IRQ_TYPE_EDGE_RISING, 0 },
-	{ AU1100_USB_HOST_INT,	  IRQ_TYPE_LEVEL_LOW,   0 },
-	{ AU1100_ACSYNC_INT,	  IRQ_TYPE_EDGE_RISING, 0 },
-	{ AU1100_MAC0_DMA_INT,	  IRQ_TYPE_LEVEL_HIGH,  0 },
-	{ AU1100_LCD_INT,	  IRQ_TYPE_LEVEL_HIGH,  0 },
-	{ AU1100_AC97C_INT,	  IRQ_TYPE_EDGE_RISING, 0 },
+struct alchemy_irqmap au1550_irqmap[] __initdata = {
+	{ AU1550_UART0_INT,	  IRQ_TYPE_LEVEL_HIGH,  1, 0 },
+	{ AU1550_PCI_INTA,	  IRQ_TYPE_LEVEL_LOW,   1, 0 },
+	{ AU1550_PCI_INTB,	  IRQ_TYPE_LEVEL_LOW,   1, 0 },
+	{ AU1550_DDMA_INT,	  IRQ_TYPE_LEVEL_HIGH,  1, 0 },
+	{ AU1550_CRYPTO_INT,	  IRQ_TYPE_LEVEL_HIGH,  1, 0 },
+	{ AU1550_PCI_INTC,	  IRQ_TYPE_LEVEL_LOW,   1, 0 },
+	{ AU1550_PCI_INTD,	  IRQ_TYPE_LEVEL_LOW,   1, 0 },
+	{ AU1550_PCI_RST_INT,	  IRQ_TYPE_LEVEL_LOW,   1, 0 },
+	{ AU1550_UART1_INT,	  IRQ_TYPE_LEVEL_HIGH,  1, 0 },
+	{ AU1550_UART3_INT,	  IRQ_TYPE_LEVEL_HIGH,  1, 0 },
+	{ AU1550_PSC0_INT,	  IRQ_TYPE_LEVEL_HIGH,  1, 0 },
+	{ AU1550_PSC1_INT,	  IRQ_TYPE_LEVEL_HIGH,  1, 0 },
+	{ AU1550_PSC2_INT,	  IRQ_TYPE_LEVEL_HIGH,  1, 0 },
+	{ AU1550_PSC3_INT,	  IRQ_TYPE_LEVEL_HIGH,  1, 0 },
+	{ AU1550_TOY_INT,	  IRQ_TYPE_EDGE_RISING, 1, 0 },
+	{ AU1550_TOY_MATCH0_INT,  IRQ_TYPE_EDGE_RISING, 1, 0 },
+	{ AU1550_TOY_MATCH1_INT,  IRQ_TYPE_EDGE_RISING, 1, 0 },
+	{ AU1550_TOY_MATCH2_INT,  IRQ_TYPE_EDGE_RISING, 1, 0 },
+	{ AU1550_RTC_INT,	  IRQ_TYPE_EDGE_RISING, 1, 0 },
+	{ AU1550_RTC_MATCH0_INT,  IRQ_TYPE_EDGE_RISING, 1, 0 },
+	{ AU1550_RTC_MATCH1_INT,  IRQ_TYPE_EDGE_RISING, 1, 0 },
+	{ AU1550_RTC_MATCH2_INT,  IRQ_TYPE_EDGE_RISING, 0, 0 },
+	{ AU1550_NAND_INT,	  IRQ_TYPE_EDGE_RISING, 1, 0 },
+	{ AU1550_USB_DEV_REQ_INT, IRQ_TYPE_LEVEL_HIGH,  0, 0 },
+	{ AU1550_USB_DEV_SUS_INT, IRQ_TYPE_EDGE_RISING, 1, 0 },
+	{ AU1550_USB_HOST_INT,	  IRQ_TYPE_LEVEL_LOW,   1, 0 },
+	{ AU1550_MAC0_DMA_INT,	  IRQ_TYPE_LEVEL_HIGH,  1, 0 },
+	{ AU1550_MAC1_DMA_INT,	  IRQ_TYPE_LEVEL_HIGH,  1, 0 },
 	{ -1, },
 };
 
-struct au1xxx_irqmap au1550_irqmap[] __initdata = {
-	{ AU1550_UART0_INT,	  IRQ_TYPE_LEVEL_HIGH,  0 },
-	{ AU1550_PCI_INTA,	  IRQ_TYPE_LEVEL_LOW,   0 },
-	{ AU1550_PCI_INTB,	  IRQ_TYPE_LEVEL_LOW,   0 },
-	{ AU1550_DDMA_INT,	  IRQ_TYPE_LEVEL_HIGH,  0 },
-	{ AU1550_CRYPTO_INT,	  IRQ_TYPE_LEVEL_HIGH,  0 },
-	{ AU1550_PCI_INTC,	  IRQ_TYPE_LEVEL_LOW,   0 },
-	{ AU1550_PCI_INTD,	  IRQ_TYPE_LEVEL_LOW,   0 },
-	{ AU1550_PCI_RST_INT,	  IRQ_TYPE_LEVEL_LOW,   0 },
-	{ AU1550_UART1_INT,	  IRQ_TYPE_LEVEL_HIGH,  0 },
-	{ AU1550_UART3_INT,	  IRQ_TYPE_LEVEL_HIGH,  0 },
-	{ AU1550_PSC0_INT,	  IRQ_TYPE_LEVEL_HIGH,  0 },
-	{ AU1550_PSC1_INT,	  IRQ_TYPE_LEVEL_HIGH,  0 },
-	{ AU1550_PSC2_INT,	  IRQ_TYPE_LEVEL_HIGH,  0 },
-	{ AU1550_PSC3_INT,	  IRQ_TYPE_LEVEL_HIGH,  0 },
-	{ AU1550_TOY_INT,	  IRQ_TYPE_EDGE_RISING, 0 },
-	{ AU1550_TOY_MATCH0_INT,  IRQ_TYPE_EDGE_RISING, 0 },
-	{ AU1550_TOY_MATCH1_INT,  IRQ_TYPE_EDGE_RISING, 0 },
-	{ AU1550_TOY_MATCH2_INT,  IRQ_TYPE_EDGE_RISING, 0 },
-	{ AU1550_RTC_INT,	  IRQ_TYPE_EDGE_RISING, 0 },
-	{ AU1550_RTC_MATCH0_INT,  IRQ_TYPE_EDGE_RISING, 0 },
-	{ AU1550_RTC_MATCH1_INT,  IRQ_TYPE_EDGE_RISING, 0 },
-	{ AU1550_RTC_MATCH2_INT,  IRQ_TYPE_EDGE_RISING, 1 },
-	{ AU1550_NAND_INT,	  IRQ_TYPE_EDGE_RISING, 0 },
-	{ AU1550_USB_DEV_REQ_INT, IRQ_TYPE_LEVEL_HIGH,  1 },
-	{ AU1550_USB_DEV_SUS_INT, IRQ_TYPE_EDGE_RISING, 0 },
-	{ AU1550_USB_HOST_INT,	  IRQ_TYPE_LEVEL_LOW,   0 },
-	{ AU1550_MAC0_DMA_INT,	  IRQ_TYPE_LEVEL_HIGH,  0 },
-	{ AU1550_MAC1_DMA_INT,	  IRQ_TYPE_LEVEL_HIGH,  0 },
+struct alchemy_irqmap au1200_irqmap[] __initdata = {
+	{ AU1200_UART0_INT,	  IRQ_TYPE_LEVEL_HIGH,  1, 0 },
+	{ AU1200_SWT_INT,	  IRQ_TYPE_EDGE_RISING, 1, 0 },
+	{ AU1200_SD_INT,	  IRQ_TYPE_LEVEL_HIGH,  1, 0 },
+	{ AU1200_DDMA_INT,	  IRQ_TYPE_LEVEL_HIGH,  1, 0 },
+	{ AU1200_MAE_BE_INT,	  IRQ_TYPE_LEVEL_HIGH,  1, 0 },
+	{ AU1200_UART1_INT,	  IRQ_TYPE_LEVEL_HIGH,  1, 0 },
+	{ AU1200_MAE_FE_INT,	  IRQ_TYPE_LEVEL_HIGH,  1, 0 },
+	{ AU1200_PSC0_INT,	  IRQ_TYPE_LEVEL_HIGH,  1, 0 },
+	{ AU1200_PSC1_INT,	  IRQ_TYPE_LEVEL_HIGH,  1, 0 },
+	{ AU1200_AES_INT,	  IRQ_TYPE_LEVEL_HIGH,  1, 0 },
+	{ AU1200_CAMERA_INT,	  IRQ_TYPE_LEVEL_HIGH,  1, 0 },
+	{ AU1200_TOY_INT,	  IRQ_TYPE_EDGE_RISING, 1, 0 },
+	{ AU1200_TOY_MATCH0_INT,  IRQ_TYPE_EDGE_RISING, 1, 0 },
+	{ AU1200_TOY_MATCH1_INT,  IRQ_TYPE_EDGE_RISING, 1, 0 },
+	{ AU1200_TOY_MATCH2_INT,  IRQ_TYPE_EDGE_RISING, 1, 0 },
+	{ AU1200_RTC_INT,	  IRQ_TYPE_EDGE_RISING, 1, 0 },
+	{ AU1200_RTC_MATCH0_INT,  IRQ_TYPE_EDGE_RISING, 1, 0 },
+	{ AU1200_RTC_MATCH1_INT,  IRQ_TYPE_EDGE_RISING, 1, 0 },
+	{ AU1200_RTC_MATCH2_INT,  IRQ_TYPE_EDGE_RISING, 0, 0 },
+	{ AU1200_NAND_INT,	  IRQ_TYPE_EDGE_RISING, 1, 0 },
+	{ AU1200_USB_INT,	  IRQ_TYPE_LEVEL_HIGH,  1, 0 },
+	{ AU1200_LCD_INT,	  IRQ_TYPE_LEVEL_HIGH,  1, 0 },
+	{ AU1200_MAE_BOTH_INT,	  IRQ_TYPE_LEVEL_HIGH,  1, 0 },
 	{ -1, },
 };
 
-struct au1xxx_irqmap au1200_irqmap[] __initdata = {
-	{ AU1200_UART0_INT,	  IRQ_TYPE_LEVEL_HIGH,  0 },
-	{ AU1200_SWT_INT,	  IRQ_TYPE_EDGE_RISING, 0 },
-	{ AU1200_SD_INT,	  IRQ_TYPE_LEVEL_HIGH,  0 },
-	{ AU1200_DDMA_INT,	  IRQ_TYPE_LEVEL_HIGH,  0 },
-	{ AU1200_MAE_BE_INT,	  IRQ_TYPE_LEVEL_HIGH,  0 },
-	{ AU1200_UART1_INT,	  IRQ_TYPE_LEVEL_HIGH,  0 },
-	{ AU1200_MAE_FE_INT,	  IRQ_TYPE_LEVEL_HIGH,  0 },
-	{ AU1200_PSC0_INT,	  IRQ_TYPE_LEVEL_HIGH,  0 },
-	{ AU1200_PSC1_INT,	  IRQ_TYPE_LEVEL_HIGH,  0 },
-	{ AU1200_AES_INT,	  IRQ_TYPE_LEVEL_HIGH,  0 },
-	{ AU1200_CAMERA_INT,	  IRQ_TYPE_LEVEL_HIGH,  0 },
-	{ AU1200_TOY_INT,	  IRQ_TYPE_EDGE_RISING, 0 },
-	{ AU1200_TOY_MATCH0_INT,  IRQ_TYPE_EDGE_RISING, 0 },
-	{ AU1200_TOY_MATCH1_INT,  IRQ_TYPE_EDGE_RISING, 0 },
-	{ AU1200_TOY_MATCH2_INT,  IRQ_TYPE_EDGE_RISING, 0 },
-	{ AU1200_RTC_INT,	  IRQ_TYPE_EDGE_RISING, 0 },
-	{ AU1200_RTC_MATCH0_INT,  IRQ_TYPE_EDGE_RISING, 0 },
-	{ AU1200_RTC_MATCH1_INT,  IRQ_TYPE_EDGE_RISING, 0 },
-	{ AU1200_RTC_MATCH2_INT,  IRQ_TYPE_EDGE_RISING, 1 },
-	{ AU1200_NAND_INT,	  IRQ_TYPE_EDGE_RISING, 0 },
-	{ AU1200_USB_INT,	  IRQ_TYPE_LEVEL_HIGH,  0 },
-	{ AU1200_LCD_INT,	  IRQ_TYPE_LEVEL_HIGH,  0 },
-	{ AU1200_MAE_BOTH_INT,	  IRQ_TYPE_LEVEL_HIGH,  0 },
-	{ -1, },
+static struct alchemy_irqmap au1300_irqmap[] __initdata = {
+	/* multifunction: gpio pin or device */
+	{ AU1300_UART1_INT,	 IRQ_TYPE_LEVEL_HIGH,	1, 0, },
+	{ AU1300_UART2_INT,	 IRQ_TYPE_LEVEL_HIGH,	1, 0, },
+	{ AU1300_UART3_INT,	 IRQ_TYPE_LEVEL_HIGH,	1, 0, },
+	{ AU1300_SD1_INT,	 IRQ_TYPE_LEVEL_HIGH,	1, 0, },
+	{ AU1300_SD2_INT,	 IRQ_TYPE_LEVEL_HIGH,	1, 0, },
+	{ AU1300_PSC0_INT,	 IRQ_TYPE_LEVEL_HIGH,	1, 0, },
+	{ AU1300_PSC1_INT,	 IRQ_TYPE_LEVEL_HIGH,	1, 0, },
+	{ AU1300_PSC2_INT,	 IRQ_TYPE_LEVEL_HIGH,	1, 0, },
+	{ AU1300_PSC3_INT,	 IRQ_TYPE_LEVEL_HIGH,	1, 0, },
+	{ AU1300_NAND_INT,	 IRQ_TYPE_LEVEL_HIGH,	1, 0, },
+	/* au1300 internal */
+	{ AU1300_DDMA_INT,	 IRQ_TYPE_LEVEL_HIGH,	1, 1, },
+	{ AU1300_MMU_INT,	 IRQ_TYPE_LEVEL_HIGH,	1, 1, },
+	{ AU1300_MPU_INT,	 IRQ_TYPE_LEVEL_HIGH,	1, 1, },
+	{ AU1300_GPU_INT,	 IRQ_TYPE_LEVEL_HIGH,	1, 1, },
+	{ AU1300_UDMA_INT,	 IRQ_TYPE_LEVEL_HIGH,	1, 1, },
+	{ AU1300_TOY_INT,	 IRQ_TYPE_EDGE_RISING,	1, 1, },
+	{ AU1300_TOY_MATCH0_INT, IRQ_TYPE_EDGE_RISING,	1, 1, },
+	{ AU1300_TOY_MATCH1_INT, IRQ_TYPE_EDGE_RISING,	1, 1, },
+	{ AU1300_TOY_MATCH2_INT, IRQ_TYPE_EDGE_RISING,	1, 1, },
+	{ AU1300_RTC_INT,	 IRQ_TYPE_EDGE_RISING,	1, 1, },
+	{ AU1300_RTC_MATCH0_INT, IRQ_TYPE_EDGE_RISING,	1, 1, },
+	{ AU1300_RTC_MATCH1_INT, IRQ_TYPE_EDGE_RISING,	1, 1, },
+	{ AU1300_RTC_MATCH2_INT, IRQ_TYPE_EDGE_RISING,	0, 1, },
+	{ AU1300_UART0_INT,	 IRQ_TYPE_LEVEL_HIGH,	1, 1, },
+	{ AU1300_SD0_INT,	 IRQ_TYPE_LEVEL_HIGH,	1, 1, },
+	{ AU1300_USB_INT,	 IRQ_TYPE_LEVEL_HIGH,	1, 1, },
+	{ AU1300_LCD_INT,	 IRQ_TYPE_LEVEL_HIGH,	1, 1, },
+	{ AU1300_BSA_INT,	 IRQ_TYPE_LEVEL_HIGH,	1, 1, },
+	{ AU1300_MPE_INT,	 IRQ_TYPE_EDGE_RISING,	1, 1, },
+	{ AU1300_ITE_INT,	 IRQ_TYPE_LEVEL_HIGH,	1, 1, },
+	{ AU1300_AES_INT,	 IRQ_TYPE_LEVEL_HIGH,	1, 1, },
+	{ AU1300_CIM_INT,	 IRQ_TYPE_LEVEL_HIGH,	1, 1, },
+	{ -1, },	/* terminator */
 };
 
+/******************************************************************************/
 
 static void au1x_ic0_unmask(struct irq_data *d)
 {
@@ -265,14 +302,6 @@ static void au1x_ic1_unmask(struct irq_data *d)
 
 	__raw_writel(1 << bit, base + IC_MASKSET);
 	__raw_writel(1 << bit, base + IC_WAKESET);
-
-/* very hacky. does the pb1000 cpld auto-disable this int?
- * nowhere in the current kernel sources is it disabled.	--mlau
- */
-#if defined(CONFIG_MIPS_PB1000)
-	if (d->irq == AU1000_GPIO15_INT)
-		__raw_writel(0x4000, (void __iomem *)PB1000_MDR); /* enable int */
-#endif
 	wmb();
 }
 
@@ -470,40 +499,219 @@ static int au1x_ic_settype(struct irq_data *d, unsigned int flow_type)
 	return ret;
 }
 
-asmlinkage void plat_irq_dispatch(void)
+/******************************************************************************/
+
+/*
+ * au1300_gpic_chgcfg - change PIN configuration.
+ * @gpio:	pin to change (0-based GPIO number from datasheet).
+ * @clr:	clear all bits set in 'clr'.
+ * @set:	set these bits.
+ *
+ * modifies a pins' configuration register, bits set in @clr will
+ * be cleared in the register, bits in @set will be set.
+ */
+static inline void au1300_gpic_chgcfg(unsigned int gpio,
+				      unsigned long clr,
+				      unsigned long set)
+{
+	void __iomem *r = AU1300_GPIC_ADDR;
+	unsigned long l;
+
+	r += gpio * 4;	/* offset into pin config array */
+	l = __raw_readl(r + AU1300_GPIC_PINCFG);
+	l &= ~clr;
+	l |= set;
+	__raw_writel(l, r + AU1300_GPIC_PINCFG);
+	wmb();
+}
+
+/*
+ * au1300_pinfunc_to_gpio - assign a pin as GPIO input (GPIO ctrl).
+ * @pin:	pin (0-based GPIO number from datasheet).
+ *
+ * Assigns a GPIO pin to the GPIO controller, so its level can either
+ * be read or set through the generic GPIO functions.
+ * If you need a GPOUT, use au1300_gpio_set_value(pin, 0/1).
+ * REVISIT: is this function really necessary?
+ */
+void au1300_pinfunc_to_gpio(enum au1300_multifunc_pins gpio)
+{
+	au1300_gpio_direction_input(gpio + AU1300_GPIO_BASE);
+}
+EXPORT_SYMBOL_GPL(au1300_pinfunc_to_gpio);
+
+/*
+ * au1300_pinfunc_to_dev - assign a pin to the device function.
+ * @pin:	pin (0-based GPIO number from datasheet).
+ *
+ * Assigns a GPIO pin to its associated device function; the pin will be
+ * driven by the device and not through GPIO functions.
+ */
+void au1300_pinfunc_to_dev(enum au1300_multifunc_pins gpio)
+{
+	void __iomem *r = AU1300_GPIC_ADDR;
+	unsigned long bit;
+
+	r += GPIC_GPIO_BANKOFF(gpio);
+	bit = GPIC_GPIO_TO_BIT(gpio);
+	__raw_writel(bit, r + AU1300_GPIC_DEVSEL);
+	wmb();
+}
+EXPORT_SYMBOL_GPL(au1300_pinfunc_to_dev);
+
+/*
+ * au1300_set_irq_priority -  set internal priority of IRQ.
+ * @irq:	irq to set priority (linux irq number).
+ * @p:		priority (0 = highest, 3 = lowest).
+ */
+void au1300_set_irq_priority(unsigned int irq, int p)
 {
-	unsigned int pending = read_c0_status() & read_c0_cause();
-	unsigned long s, off;
-
-	if (pending & CAUSEF_IP7) {
-		off = MIPS_CPU_IRQ_BASE + 7;
-		goto handle;
-	} else if (pending & CAUSEF_IP2) {
-		s = KSEG1ADDR(AU1000_IC0_PHYS_ADDR) + IC_REQ0INT;
-		off = AU1000_INTC0_INT_BASE;
-	} else if (pending & CAUSEF_IP3) {
-		s = KSEG1ADDR(AU1000_IC0_PHYS_ADDR) + IC_REQ1INT;
-		off = AU1000_INTC0_INT_BASE;
-	} else if (pending & CAUSEF_IP4) {
-		s = KSEG1ADDR(AU1000_IC1_PHYS_ADDR) + IC_REQ0INT;
-		off = AU1000_INTC1_INT_BASE;
-	} else if (pending & CAUSEF_IP5) {
-		s = KSEG1ADDR(AU1000_IC1_PHYS_ADDR) + IC_REQ1INT;
-		off = AU1000_INTC1_INT_BASE;
-	} else
-		goto spurious;
-
-	s = __raw_readl((void __iomem *)s);
-	if (unlikely(!s)) {
-spurious:
-		spurious_interrupt();
-		return;
+	irq -= ALCHEMY_GPIC_INT_BASE;
+	au1300_gpic_chgcfg(irq, GPIC_CFG_IL_MASK, GPIC_CFG_IL_SET(p));
+}
+EXPORT_SYMBOL_GPL(au1300_set_irq_priority);
+
+/*
+ * au1300_set_dbdma_gpio - assign a gpio to one of the DBDMA triggers.
+ * @dchan:	dbdma trigger select (0, 1).
+ * @gpio:	pin to assign as trigger.
+ *
+ * DBDMA controller has 2 external trigger sources; this function
+ * assigns a GPIO to the selected trigger.
+ */
+void au1300_set_dbdma_gpio(int dchan, unsigned int gpio)
+{
+	unsigned long r;
+
+	if ((dchan >= 0) && (dchan <= 1)) {
+		r = __raw_readl(AU1300_GPIC_ADDR + AU1300_GPIC_DMASEL);
+		r &= ~(0xff << (8 * dchan));
+		r |= (gpio & 0x7f) << (8 * dchan);
+		__raw_writel(r, AU1300_GPIC_ADDR + AU1300_GPIC_DMASEL);
+		wmb();
 	}
-	off += __ffs(s);
-handle:
-	do_IRQ(off);
 }
 
+static inline void gpic_pin_set_idlewake(unsigned int gpio, int allow)
+{
+	au1300_gpic_chgcfg(gpio, GPIC_CFG_IDLEWAKE,
+			   allow ? GPIC_CFG_IDLEWAKE : 0);
+}
+
+static void au1300_gpic_mask(struct irq_data *d)
+{
+	void __iomem *r = AU1300_GPIC_ADDR;
+	unsigned long bit, irq = d->irq;
+
+	irq -= ALCHEMY_GPIC_INT_BASE;
+	r += GPIC_GPIO_BANKOFF(irq);
+	bit = GPIC_GPIO_TO_BIT(irq);
+	__raw_writel(bit, r + AU1300_GPIC_IDIS);
+	wmb();
+
+	gpic_pin_set_idlewake(irq, 0);
+}
+
+static void au1300_gpic_unmask(struct irq_data *d)
+{
+	void __iomem *r = AU1300_GPIC_ADDR;
+	unsigned long bit, irq = d->irq;
+
+	irq -= ALCHEMY_GPIC_INT_BASE;
+
+	gpic_pin_set_idlewake(irq, 1);
+
+	r += GPIC_GPIO_BANKOFF(irq);
+	bit = GPIC_GPIO_TO_BIT(irq);
+	__raw_writel(bit, r + AU1300_GPIC_IEN);
+	wmb();
+}
+
+static void au1300_gpic_maskack(struct irq_data *d)
+{
+	void __iomem *r = AU1300_GPIC_ADDR;
+	unsigned long bit, irq = d->irq;
+
+	irq -= ALCHEMY_GPIC_INT_BASE;
+	r += GPIC_GPIO_BANKOFF(irq);
+	bit = GPIC_GPIO_TO_BIT(irq);
+	__raw_writel(bit, r + AU1300_GPIC_IPEND);	/* ack */
+	__raw_writel(bit, r + AU1300_GPIC_IDIS);	/* mask */
+	wmb();
+
+	gpic_pin_set_idlewake(irq, 0);
+}
+
+static void au1300_gpic_ack(struct irq_data *d)
+{
+	void __iomem *r = AU1300_GPIC_ADDR;
+	unsigned long bit, irq = d->irq;
+
+	irq -= ALCHEMY_GPIC_INT_BASE;
+	r += GPIC_GPIO_BANKOFF(irq);
+	bit = GPIC_GPIO_TO_BIT(irq);
+	__raw_writel(bit, r + AU1300_GPIC_IPEND);	/* ack */
+	wmb();
+}
+
+static struct irq_chip au1300_gpic = {
+	.name		= "GPIOINT",
+	.irq_ack	= au1300_gpic_ack,
+	.irq_mask	= au1300_gpic_mask,
+	.irq_mask_ack	= au1300_gpic_maskack,
+	.irq_unmask	= au1300_gpic_unmask,
+	.irq_set_type	= au1300_gpic_settype,
+};
+
+static int au1300_gpic_settype(struct irq_data *d, unsigned int type)
+{
+	unsigned long s;
+	unsigned char *name = NULL;
+	irq_flow_handler_t hdl = NULL;
+
+	switch (type) {
+	case IRQ_TYPE_LEVEL_HIGH:
+		s = GPIC_CFG_IC_LEVEL_HIGH;
+		name = "high";
+		hdl = handle_level_irq;
+		break;
+	case IRQ_TYPE_LEVEL_LOW:
+		s = GPIC_CFG_IC_LEVEL_LOW;
+		name = "low";
+		hdl = handle_level_irq;
+		break;
+	case IRQ_TYPE_EDGE_RISING:
+		s = GPIC_CFG_IC_EDGE_RISE;
+		name = "posedge";
+		hdl = handle_edge_irq;
+		break;
+	case IRQ_TYPE_EDGE_FALLING:
+		s = GPIC_CFG_IC_EDGE_FALL;
+		name = "negedge";
+		hdl = handle_edge_irq;
+		break;
+	case IRQ_TYPE_EDGE_BOTH:
+		s = GPIC_CFG_IC_EDGE_BOTH;
+		name = "bothedge";
+		hdl = handle_edge_irq;
+		break;
+	case IRQ_TYPE_NONE:
+		s = GPIC_CFG_IC_OFF;
+		name = "disabled";
+		hdl = handle_level_irq;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	__irq_set_chip_handler_name_locked(d->irq, &au1300_gpic, hdl, name);
+
+	au1300_gpic_chgcfg(d->irq - ALCHEMY_GPIC_INT_BASE, GPIC_CFG_IC_MASK, s);
+
+	return 0;
+}
+
+/******************************************************************************/
 
 static inline void ic_init(void __iomem *base)
 {
@@ -521,13 +729,159 @@ static inline void ic_init(void __iomem *base)
 	wmb();
 }
 
-static void __init au1000_init_irq(struct au1xxx_irqmap *map)
+static unsigned long alchemy_gpic_pmdata[ALCHEMY_GPIC_INT_NUM + 6];
+
+static inline void alchemy_ic_suspend_one(void __iomem *base, unsigned long *d)
+{
+	d[0] = __raw_readl(base + IC_CFG0RD);
+	d[1] = __raw_readl(base + IC_CFG1RD);
+	d[2] = __raw_readl(base + IC_CFG2RD);
+	d[3] = __raw_readl(base + IC_SRCRD);
+	d[4] = __raw_readl(base + IC_ASSIGNRD);
+	d[5] = __raw_readl(base + IC_WAKERD);
+	d[6] = __raw_readl(base + IC_MASKRD);
+	ic_init(base);		/* shut it up too while at it */
+}
+
+static inline void alchemy_ic_resume_one(void __iomem *base, unsigned long *d)
+{
+	ic_init(base);
+
+	__raw_writel(d[0], base + IC_CFG0SET);
+	__raw_writel(d[1], base + IC_CFG1SET);
+	__raw_writel(d[2], base + IC_CFG2SET);
+	__raw_writel(d[3], base + IC_SRCSET);
+	__raw_writel(d[4], base + IC_ASSIGNSET);
+	__raw_writel(d[5], base + IC_WAKESET);
+	wmb();
+
+	__raw_writel(d[6], base + IC_MASKSET);
+	wmb();
+}
+
+static int alchemy_ic_suspend(void)
+{
+	alchemy_ic_suspend_one((void __iomem *)KSEG1ADDR(AU1000_IC0_PHYS_ADDR),
+			       alchemy_gpic_pmdata);
+	alchemy_ic_suspend_one((void __iomem *)KSEG1ADDR(AU1000_IC1_PHYS_ADDR),
+			       &alchemy_gpic_pmdata[7]);
+	return 0;
+}
+
+static void alchemy_ic_resume(void)
+{
+	alchemy_ic_resume_one((void __iomem *)KSEG1ADDR(AU1000_IC1_PHYS_ADDR),
+			      &alchemy_gpic_pmdata[7]);
+	alchemy_ic_resume_one((void __iomem *)KSEG1ADDR(AU1000_IC0_PHYS_ADDR),
+			      alchemy_gpic_pmdata);
+}
+
+static int alchemy_gpic_suspend(void)
+{
+	void __iomem *base = (void __iomem *)KSEG1ADDR(AU1300_GPIC_PHYS_ADDR);
+	int i;
+
+	/* save 4 interrupt mask status registers */
+	alchemy_gpic_pmdata[0] = __raw_readl(base + AU1300_GPIC_IEN + 0x0);
+	alchemy_gpic_pmdata[1] = __raw_readl(base + AU1300_GPIC_IEN + 0x4);
+	alchemy_gpic_pmdata[2] = __raw_readl(base + AU1300_GPIC_IEN + 0x8);
+	alchemy_gpic_pmdata[3] = __raw_readl(base + AU1300_GPIC_IEN + 0xc);
+
+	/* save misc register(s) */
+	alchemy_gpic_pmdata[4] = __raw_readl(base + AU1300_GPIC_DMASEL);
+
+	/* molto silenzioso */
+	__raw_writel(~0UL, base + AU1300_GPIC_IDIS + 0x0);
+	__raw_writel(~0UL, base + AU1300_GPIC_IDIS + 0x4);
+	__raw_writel(~0UL, base + AU1300_GPIC_IDIS + 0x8);
+	__raw_writel(~0UL, base + AU1300_GPIC_IDIS + 0xc);
+	wmb();
+
+	/* save pin/int-type configuration */
+	base += AU1300_GPIC_PINCFG;
+	for (i = 0; i < ALCHEMY_GPIC_INT_NUM; i++)
+		alchemy_gpic_pmdata[i + 5] = __raw_readl(base + (i << 2));
+
+	wmb();
+
+	return 0;
+}
+
+static void alchemy_gpic_resume(void)
+{
+	void __iomem *base = (void __iomem *)KSEG1ADDR(AU1300_GPIC_PHYS_ADDR);
+	int i;
+
+	/* disable all first */
+	__raw_writel(~0UL, base + AU1300_GPIC_IDIS + 0x0);
+	__raw_writel(~0UL, base + AU1300_GPIC_IDIS + 0x4);
+	__raw_writel(~0UL, base + AU1300_GPIC_IDIS + 0x8);
+	__raw_writel(~0UL, base + AU1300_GPIC_IDIS + 0xc);
+	wmb();
+
+	/* restore pin/int-type configurations */
+	base += AU1300_GPIC_PINCFG;
+	for (i = 0; i < ALCHEMY_GPIC_INT_NUM; i++)
+		__raw_writel(alchemy_gpic_pmdata[i + 5], base + (i << 2));
+	wmb();
+
+	/* restore misc register(s) */
+	base = (void __iomem *)KSEG1ADDR(AU1300_GPIC_PHYS_ADDR);
+	__raw_writel(alchemy_gpic_pmdata[4], base + AU1300_GPIC_DMASEL);
+	wmb();
+
+	/* finally restore masks */
+	__raw_writel(alchemy_gpic_pmdata[0], base + AU1300_GPIC_IEN + 0x0);
+	__raw_writel(alchemy_gpic_pmdata[1], base + AU1300_GPIC_IEN + 0x4);
+	__raw_writel(alchemy_gpic_pmdata[2], base + AU1300_GPIC_IEN + 0x8);
+	__raw_writel(alchemy_gpic_pmdata[3], base + AU1300_GPIC_IEN + 0xc);
+	wmb();
+}
+
+static struct syscore_ops alchemy_ic_pmops = {
+	.suspend	= alchemy_ic_suspend,
+	.resume		= alchemy_ic_resume,
+};
+
+static struct syscore_ops alchemy_gpic_pmops = {
+	.suspend	= alchemy_gpic_suspend,
+	.resume		= alchemy_gpic_resume,
+};
+
+/******************************************************************************/
+
+/* create chained handlers for the 4 IC requests to the MIPS IRQ ctrl */
+#define DISP(name, base, addr)						      \
+static void au1000_##name##_dispatch(unsigned int irq, struct irq_desc *d)    \
+{									      \
+	unsigned long r = __raw_readl((void __iomem *)KSEG1ADDR(addr));	      \
+	if (likely(r))							      \
+		generic_handle_irq(base + __ffs(r));			      \
+	else								      \
+		spurious_interrupt();					      \
+}
+
+DISP(ic0r0, AU1000_INTC0_INT_BASE, AU1000_IC0_PHYS_ADDR + IC_REQ0INT)
+DISP(ic0r1, AU1000_INTC0_INT_BASE, AU1000_IC0_PHYS_ADDR + IC_REQ1INT)
+DISP(ic1r0, AU1000_INTC1_INT_BASE, AU1000_IC1_PHYS_ADDR + IC_REQ0INT)
+DISP(ic1r1, AU1000_INTC1_INT_BASE, AU1000_IC1_PHYS_ADDR + IC_REQ1INT)
+
+static void alchemy_gpic_dispatch(unsigned int irq, struct irq_desc *d)
+{
+	int i = __raw_readl(AU1300_GPIC_ADDR + AU1300_GPIC_PRIENC);
+	generic_handle_irq(ALCHEMY_GPIC_INT_BASE + i);
+}
+
+/******************************************************************************/
+
+static void __init au1000_init_irq(struct alchemy_irqmap *map)
 {
 	unsigned int bit, irq_nr;
 	void __iomem *base;
 
 	ic_init((void __iomem *)KSEG1ADDR(AU1000_IC0_PHYS_ADDR));
 	ic_init((void __iomem *)KSEG1ADDR(AU1000_IC1_PHYS_ADDR));
+	register_syscore_ops(&alchemy_ic_pmops);
 	mips_cpu_irq_init();
 
 	/* register all 64 possible IC0+IC1 irq sources as type "none".
@@ -544,8 +898,8 @@ static void __init au1000_init_irq(struct au1xxx_irqmap *map)
 	/*
 	 * Initialize IC0, which is fixed per processor.
 	 */
-	while (map->im_irq != -1) {
-		irq_nr = map->im_irq;
+	while (map->irq != -1) {
+		irq_nr = map->irq;
 
 		if (irq_nr >= AU1000_INTC1_INT_BASE) {
 			bit = irq_nr - AU1000_INTC1_INT_BASE;
@@ -554,16 +908,61 @@ static void __init au1000_init_irq(struct au1xxx_irqmap *map)
 			bit = irq_nr - AU1000_INTC0_INT_BASE;
 			base = (void __iomem *)KSEG1ADDR(AU1000_IC0_PHYS_ADDR);
 		}
-		if (map->im_request)
+		if (map->prio == 0)
 			__raw_writel(1 << bit, base + IC_ASSIGNSET);
 
-		au1x_ic_settype(irq_get_irq_data(irq_nr), map->im_type);
+		au1x_ic_settype(irq_get_irq_data(irq_nr), map->type);
 		++map;
 	}
 
-	set_c0_status(IE_IRQ0 | IE_IRQ1 | IE_IRQ2 | IE_IRQ3);
+	irq_set_chained_handler(MIPS_CPU_IRQ_BASE + 2, au1000_ic0r0_dispatch);
+	irq_set_chained_handler(MIPS_CPU_IRQ_BASE + 3, au1000_ic0r1_dispatch);
+	irq_set_chained_handler(MIPS_CPU_IRQ_BASE + 4, au1000_ic1r0_dispatch);
+	irq_set_chained_handler(MIPS_CPU_IRQ_BASE + 5, au1000_ic1r1_dispatch);
+}
+
+static void __init alchemy_gpic_init_irq(const struct alchemy_irqmap *dints)
+{
+	int i;
+	void __iomem *bank_base;
+
+	register_syscore_ops(&alchemy_gpic_pmops);
+	mips_cpu_irq_init();
+
+	/* disable & ack all possible interrupt sources */
+	for (i = 0; i < 4; i++) {
+		bank_base = AU1300_GPIC_ADDR + (i * 4);
+		__raw_writel(~0UL, bank_base + AU1300_GPIC_IDIS);
+		wmb();
+		__raw_writel(~0UL, bank_base + AU1300_GPIC_IPEND);
+		wmb();
+	}
+
+	/* register an irq_chip for them, with 2nd highest priority */
+	for (i = ALCHEMY_GPIC_INT_BASE; i <= ALCHEMY_GPIC_INT_LAST; i++) {
+		au1300_set_irq_priority(i, 1);
+		au1300_gpic_settype(irq_get_irq_data(i), IRQ_TYPE_NONE);
+	}
+
+	/* setup known on-chip sources */
+	while ((i = dints->irq) != -1) {
+		au1300_gpic_settype(irq_get_irq_data(i), dints->type);
+		au1300_set_irq_priority(i, dints->prio);
+
+		if (dints->internal)
+			au1300_pinfunc_to_dev(i - ALCHEMY_GPIC_INT_BASE);
+
+		dints++;
+	}
+
+	irq_set_chained_handler(MIPS_CPU_IRQ_BASE + 2, alchemy_gpic_dispatch);
+	irq_set_chained_handler(MIPS_CPU_IRQ_BASE + 3, alchemy_gpic_dispatch);
+	irq_set_chained_handler(MIPS_CPU_IRQ_BASE + 4, alchemy_gpic_dispatch);
+	irq_set_chained_handler(MIPS_CPU_IRQ_BASE + 5, alchemy_gpic_dispatch);
 }
 
+/******************************************************************************/
+
 void __init arch_init_irq(void)
 {
 	switch (alchemy_get_cputype()) {
@@ -582,65 +981,17 @@ void __init arch_init_irq(void)
 	case ALCHEMY_CPU_AU1200:
 		au1000_init_irq(au1200_irqmap);
 		break;
+	case ALCHEMY_CPU_AU1300:
+		alchemy_gpic_init_irq(au1300_irqmap);
+		break;
+	default:
+		pr_err("unknown Alchemy IRQ core\n");
+		break;
 	}
 }
 
-
-static unsigned long alchemy_ic_pmdata[7 * 2];
-
-static inline void alchemy_ic_suspend_one(void __iomem *base, unsigned long *d)
-{
-	d[0] = __raw_readl(base + IC_CFG0RD);
-	d[1] = __raw_readl(base + IC_CFG1RD);
-	d[2] = __raw_readl(base + IC_CFG2RD);
-	d[3] = __raw_readl(base + IC_SRCRD);
-	d[4] = __raw_readl(base + IC_ASSIGNRD);
-	d[5] = __raw_readl(base + IC_WAKERD);
-	d[6] = __raw_readl(base + IC_MASKRD);
-	ic_init(base);		/* shut it up too while at it */
-}
-
-static inline void alchemy_ic_resume_one(void __iomem *base, unsigned long *d)
-{
-	ic_init(base);
-
-	__raw_writel(d[0], base + IC_CFG0SET);
-	__raw_writel(d[1], base + IC_CFG1SET);
-	__raw_writel(d[2], base + IC_CFG2SET);
-	__raw_writel(d[3], base + IC_SRCSET);
-	__raw_writel(d[4], base + IC_ASSIGNSET);
-	__raw_writel(d[5], base + IC_WAKESET);
-	wmb();
-
-	__raw_writel(d[6], base + IC_MASKSET);
-	wmb();
-}
-
-static int alchemy_ic_suspend(void)
-{
-	alchemy_ic_suspend_one((void __iomem *)KSEG1ADDR(AU1000_IC0_PHYS_ADDR),
-			       alchemy_ic_pmdata);
-	alchemy_ic_suspend_one((void __iomem *)KSEG1ADDR(AU1000_IC1_PHYS_ADDR),
-			       &alchemy_ic_pmdata[7]);
-	return 0;
-}
-
-static void alchemy_ic_resume(void)
-{
-	alchemy_ic_resume_one((void __iomem *)KSEG1ADDR(AU1000_IC1_PHYS_ADDR),
-			      &alchemy_ic_pmdata[7]);
-	alchemy_ic_resume_one((void __iomem *)KSEG1ADDR(AU1000_IC0_PHYS_ADDR),
-			      alchemy_ic_pmdata);
-}
-
-static struct syscore_ops alchemy_ic_syscore_ops = {
-	.suspend	= alchemy_ic_suspend,
-	.resume		= alchemy_ic_resume,
-};
-
-static int __init alchemy_ic_pm_init(void)
+asmlinkage void plat_irq_dispatch(void)
 {
-	register_syscore_ops(&alchemy_ic_syscore_ops);
-	return 0;
+	unsigned long r = (read_c0_status() & read_c0_cause()) >> 8;
+	do_IRQ(MIPS_CPU_IRQ_BASE + __ffs(r & 0xff));
 }
-device_initcall(alchemy_ic_pm_init);

arch/mips/alchemy/common/platform.c

@@ -82,6 +82,12 @@ static struct plat_serial8250_port au1x00_uart_data[][4] __initdata = {
 		PORT(AU1000_UART0_PHYS_ADDR, AU1200_UART0_INT),
 		PORT(AU1000_UART1_PHYS_ADDR, AU1200_UART1_INT),
 	},
+	[ALCHEMY_CPU_AU1300] = {
+		PORT(AU1300_UART0_PHYS_ADDR, AU1300_UART0_INT),
+		PORT(AU1300_UART1_PHYS_ADDR, AU1300_UART1_INT),
+		PORT(AU1300_UART2_PHYS_ADDR, AU1300_UART2_INT),
+		PORT(AU1300_UART3_PHYS_ADDR, AU1300_UART3_INT),
+	},
 };
 
 static struct platform_device au1xx0_uart_device = {
@@ -122,10 +128,12 @@ static unsigned long alchemy_ohci_data[][2] __initdata = {
 	[ALCHEMY_CPU_AU1100] = { AU1000_USB_OHCI_PHYS_ADDR, AU1100_USB_HOST_INT },
 	[ALCHEMY_CPU_AU1550] = { AU1550_USB_OHCI_PHYS_ADDR, AU1550_USB_HOST_INT },
 	[ALCHEMY_CPU_AU1200] = { AU1200_USB_OHCI_PHYS_ADDR, AU1200_USB_INT },
+	[ALCHEMY_CPU_AU1300] = { AU1300_USB_OHCI0_PHYS_ADDR, AU1300_USB_INT },
 };
 
 static unsigned long alchemy_ehci_data[][2] __initdata = {
 	[ALCHEMY_CPU_AU1200] = { AU1200_USB_EHCI_PHYS_ADDR, AU1200_USB_INT },
+	[ALCHEMY_CPU_AU1300] = { AU1300_USB_EHCI_PHYS_ADDR, AU1300_USB_INT },
 };
 
 static int __init _new_usbres(struct resource **r, struct platform_device **d)
@@ -169,8 +177,8 @@ static void __init alchemy_setup_usb(int ctype)
 		printk(KERN_INFO "Alchemy USB: cannot add OHCI0\n");
 
 
-	/* setup EHCI0: Au1200 */
-	if (ctype == ALCHEMY_CPU_AU1200) {
+	/* setup EHCI0: Au1200/Au1300 */
+	if ((ctype == ALCHEMY_CPU_AU1200) || (ctype == ALCHEMY_CPU_AU1300)) {
 		if (_new_usbres(&res, &pdev))
 			return;
 
@@ -187,6 +195,25 @@ static void __init alchemy_setup_usb(int ctype)
 		if (platform_device_register(pdev))
 			printk(KERN_INFO "Alchemy USB: cannot add EHCI0\n");
 	}
+
+	/* Au1300: OHCI1 */
+	if (ctype == ALCHEMY_CPU_AU1300) {
+		if (_new_usbres(&res, &pdev))
+			return;
+
+		res[0].start = AU1300_USB_OHCI1_PHYS_ADDR;
+		res[0].end = res[0].start + 0x100 - 1;
+		res[0].flags = IORESOURCE_MEM;
+		res[1].start = AU1300_USB_INT;
+		res[1].end = res[1].start;
+		res[1].flags = IORESOURCE_IRQ;
+		pdev->name = "au1xxx-ohci";
+		pdev->id = 1;
+		pdev->dev.dma_mask = &alchemy_ohci_dmamask;
+
+		if (platform_device_register(pdev))
+			printk(KERN_INFO "Alchemy USB: cannot add OHCI1\n");
+	}
 }
 
 /* Macro to help defining the Ethernet MAC resources */

arch/mips/alchemy/common/power.c

@@ -126,6 +126,9 @@ void au_sleep(void)
 	case ALCHEMY_CPU_AU1200:
 		alchemy_sleep_au1550();
 		break;
+	case ALCHEMY_CPU_AU1300:
+		alchemy_sleep_au1300();
+		break;
 	}
 
 	restore_core_regs();

arch/mips/alchemy/common/sleeper.S

@@ -153,6 +153,79 @@ LEAF(alchemy_sleep_au1550)
 
 END(alchemy_sleep_au1550)
 
+/* sleepcode for Au1300 memory controller type */
+LEAF(alchemy_sleep_au1300)
+
+	SETUP_SLEEP
+
+	/* cache following instructions, as memory gets put to sleep */
+	la	t0, 2f
+	la	t1, 4f
+	subu	t2, t1, t0
+
+	.set	mips3
+
+1:	cache	0x14, 0(t0)
+	subu	t2, t2, 32
+	bgez	t2, 1b
+	 addu	t0, t0, 32
+
+	.set	mips0
+
+2:	lui	a0, 0xb400		/* mem_xxx */
+
+	/* disable all ports in mem_sdportcfga */
+	sw	zero, 0x868(a0)		/* mem_sdportcfga */
+	sync
+
+	/* disable ODT */
+	li	t0, 0x03010000
+	sw	t0, 0x08d8(a0)		/* mem_sdcmd0 */
+	sw	t0, 0x08dc(a0)		/* mem_sdcmd1 */
+	sync
+
+	/* precharge */
+	li	t0, 0x23000400
+	sw	t0, 0x08dc(a0)		/* mem_sdcmd1 */
+	sw	t0, 0x08d8(a0)		/* mem_sdcmd0 */
+	sync
+
+	/* auto refresh */
+	sw	zero, 0x08c8(a0)	/* mem_sdautoref */
+	sync
+
+	/* block access to the DDR */
+	lw	t0, 0x0848(a0)		/* mem_sdconfigb */
+	li	t1, (1 << 7 | 0x3F)
+	or	t0, t0, t1
+	sw	t0, 0x0848(a0)		/* mem_sdconfigb */
+	sync
+
+	/* issue the Self Refresh command */
+	li	t0, 0x10000000
+	sw	t0, 0x08dc(a0)		/* mem_sdcmd1 */
+	sw	t0, 0x08d8(a0)		/* mem_sdcmd0 */
+	sync
+
+	/* wait for sdram to enter self-refresh mode */
+	lui	t0, 0x0300
+3:	lw	t1, 0x0850(a0)		/* mem_sdstat */
+	and	t2, t1, t0
+	bne	t2, t0, 3b
+	 nop
+
+	/* disable SDRAM clocks */
+	li	t0, ~(3<<28)
+	lw	t1, 0x0840(a0)		/* mem_sdconfiga */
+	and	t1, t1, t0		/* clear CE[1:0] */
+	sw	t1, 0x0840(a0)		/* mem_sdconfiga */
+	sync
+
+	DO_SLEEP
+4:
+
+END(alchemy_sleep_au1300)
+
 
 	/* This is where we return upon wakeup.
 	 * Reload all of the registers and return.

arch/mips/alchemy/common/time.c

@@ -178,6 +178,7 @@ static int alchemy_m2inttab[] __initdata = {
 	AU1100_RTC_MATCH2_INT,
 	AU1550_RTC_MATCH2_INT,
 	AU1200_RTC_MATCH2_INT,
+	AU1300_RTC_MATCH2_INT,
 };
 
 void __init plat_time_init(void)

arch/mips/alchemy/common/vss.c

@@ -0,0 +1,84 @@
+/*
+ * Au1300 media block power gating (VSS)
+ *
+ * This is a stop-gap solution until I have the clock framework integration
+ * ready. This stuff here really must be handled transparently when clocks
+ * for various media blocks are enabled/disabled.
+ */
+
+#include <linux/module.h>
+#include <linux/spinlock.h>
+#include <asm/mach-au1x00/au1000.h>
+
+#define VSS_GATE	0x00	/* gate wait timers */
+#define VSS_CLKRST	0x04	/* clock/block control */
+#define VSS_FTR		0x08	/* footers */
+
+#define VSS_ADDR(blk)	(KSEG1ADDR(AU1300_VSS_PHYS_ADDR) + (blk * 0x0c))
+
+static DEFINE_SPINLOCK(au1300_vss_lock);
+
+/* enable a block as outlined in the databook */
+static inline void __enable_block(int block)
+{
+	void __iomem *base = (void __iomem *)VSS_ADDR(block);
+
+	__raw_writel(3, base + VSS_CLKRST);	/* enable clock, assert reset */
+	wmb();
+
+	__raw_writel(0x01fffffe, base + VSS_GATE); /* maximum setup time */
+	wmb();
+
+	/* enable footers in sequence */
+	__raw_writel(0x01, base + VSS_FTR);
+	wmb();
+	__raw_writel(0x03, base + VSS_FTR);
+	wmb();
+	__raw_writel(0x07, base + VSS_FTR);
+	wmb();
+	__raw_writel(0x0f, base + VSS_FTR);
+	wmb();
+
+	__raw_writel(0x01ffffff, base + VSS_GATE); /* start FSM too */
+	wmb();
+
+	__raw_writel(2, base + VSS_CLKRST);	/* deassert reset */
+	wmb();
+
+	__raw_writel(0x1f, base + VSS_FTR);	/* enable isolation cells */
+	wmb();
+}
+
+/* disable a block as outlined in the databook */
+static inline void __disable_block(int block)
+{
+	void __iomem *base = (void __iomem *)VSS_ADDR(block);
+
+	__raw_writel(0x0f, base + VSS_FTR);	/* disable isolation cells */
+	wmb();
+	__raw_writel(0, base + VSS_GATE);	/* disable FSM */
+	wmb();
+	__raw_writel(3, base + VSS_CLKRST);	/* assert reset */
+	wmb();
+	__raw_writel(1, base + VSS_CLKRST);	/* disable clock */
+	wmb();
+	__raw_writel(0, base + VSS_FTR);	/* disable all footers */
+	wmb();
+}
+
+void au1300_vss_block_control(int block, int enable)
+{
+	unsigned long flags;
+
+	if (alchemy_get_cputype() != ALCHEMY_CPU_AU1300)
+		return;
+
+	/* only one block at a time */
+	spin_lock_irqsave(&au1300_vss_lock, flags);
+	if (enable)
+		__enable_block(block);
+	else
+		__disable_block(block);
+	spin_unlock_irqrestore(&au1300_vss_lock, flags);
+}
+EXPORT_SYMBOL_GPL(au1300_vss_block_control);

arch/mips/alchemy/devboards/Makefile

@@ -4,15 +4,10 @@
 
 obj-y += prom.o bcsr.o platform.o
 obj-$(CONFIG_PM)		+= pm.o
-obj-$(CONFIG_MIPS_PB1000)	+= pb1000/
-obj-$(CONFIG_MIPS_PB1100)	+= pb1100/
-obj-$(CONFIG_MIPS_PB1200)	+= pb1200/
-obj-$(CONFIG_MIPS_PB1500)	+= pb1500/
-obj-$(CONFIG_MIPS_PB1550)	+= pb1550/
-obj-$(CONFIG_MIPS_DB1000)	+= db1x00/
-obj-$(CONFIG_MIPS_DB1100)	+= db1x00/
-obj-$(CONFIG_MIPS_DB1200)	+= db1200/
-obj-$(CONFIG_MIPS_DB1500)	+= db1x00/
-obj-$(CONFIG_MIPS_DB1550)	+= db1x00/
-obj-$(CONFIG_MIPS_BOSPORUS)	+= db1x00/
-obj-$(CONFIG_MIPS_MIRAGE)	+= db1x00/
+obj-$(CONFIG_MIPS_PB1100)	+= pb1100.o
+obj-$(CONFIG_MIPS_PB1500)	+= pb1500.o
+obj-$(CONFIG_MIPS_PB1550)	+= pb1550.o
+obj-$(CONFIG_MIPS_DB1000)	+= db1000.o
+obj-$(CONFIG_MIPS_DB1200)	+= db1200.o
+obj-$(CONFIG_MIPS_DB1300)	+= db1300.o
+obj-$(CONFIG_MIPS_DB1550)	+= db1550.o

arch/mips/alchemy/devboards/bcsr.c

@@ -97,14 +97,9 @@ static void bcsr_csc_handler(unsigned int irq, struct irq_desc *d)
 	enable_irq(irq);
 }
 
-/* NOTE: both the enable and mask bits must be cleared, otherwise the
- * CPLD generates tons of spurious interrupts (at least on my DB1200).
- *	-- mlau
- */
 static void bcsr_irq_mask(struct irq_data *d)
 {
 	unsigned short v = 1 << (d->irq - bcsr_csc_base);
-	__raw_writew(v, bcsr_virt + BCSR_REG_INTCLR);
 	__raw_writew(v, bcsr_virt + BCSR_REG_MASKCLR);
 	wmb();
 }
@@ -112,7 +107,6 @@ static void bcsr_irq_mask(struct irq_data *d)
 static void bcsr_irq_maskack(struct irq_data *d)
 {
 	unsigned short v = 1 << (d->irq - bcsr_csc_base);
-	__raw_writew(v, bcsr_virt + BCSR_REG_INTCLR);
 	__raw_writew(v, bcsr_virt + BCSR_REG_MASKCLR);
 	__raw_writew(v, bcsr_virt + BCSR_REG_INTSTAT);	/* ack */
 	wmb();
@@ -121,7 +115,6 @@ static void bcsr_irq_maskack(struct irq_data *d)
 static void bcsr_irq_unmask(struct irq_data *d)
 {
 	unsigned short v = 1 << (d->irq - bcsr_csc_base);
-	__raw_writew(v, bcsr_virt + BCSR_REG_INTSET);
 	__raw_writew(v, bcsr_virt + BCSR_REG_MASKSET);
 	wmb();
 }
@@ -137,9 +130,9 @@ void __init bcsr_init_irq(int csc_start, int csc_end, int hook_irq)
 {
 	unsigned int irq;
 
-	/* mask & disable & ack all */
-	__raw_writew(0xffff, bcsr_virt + BCSR_REG_INTCLR);
+	/* mask & enable & ack all */
 	__raw_writew(0xffff, bcsr_virt + BCSR_REG_MASKCLR);
+	__raw_writew(0xffff, bcsr_virt + BCSR_REG_INTSET);
 	__raw_writew(0xffff, bcsr_virt + BCSR_REG_INTSTAT);
 	wmb();
 

arch/mips/alchemy/devboards/db1000.c

@@ -0,0 +1,565 @@
+/*
+ * DBAu1000/1500/1100 board support
+ *
+ * Copyright 2000, 2008 MontaVista Software Inc.
+ * Author: MontaVista Software, Inc. <source@mvista.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+ */
+
+#include <linux/dma-mapping.h>
+#include <linux/gpio.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/leds.h>
+#include <linux/mmc/host.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/pm.h>
+#include <linux/spi/spi.h>
+#include <linux/spi/spi_gpio.h>
+#include <linux/spi/ads7846.h>
+#include <asm/mach-au1x00/au1000.h>
+#include <asm/mach-au1x00/au1000_dma.h>
+#include <asm/mach-au1x00/au1100_mmc.h>
+#include <asm/mach-db1x00/bcsr.h>
+#include <asm/reboot.h>
+#include <prom.h>
+#include "platform.h"
+
+#define F_SWAPPED (bcsr_read(BCSR_STATUS) & BCSR_STATUS_DB1000_SWAPBOOT)
+
+struct pci_dev;
+
+static const char *board_type_str(void)
+{
+	switch (BCSR_WHOAMI_BOARD(bcsr_read(BCSR_WHOAMI))) {
+	case BCSR_WHOAMI_DB1000:
+		return "DB1000";
+	case BCSR_WHOAMI_DB1500:
+		return "DB1500";
+	case BCSR_WHOAMI_DB1100:
+		return "DB1100";
+	default:
+		return "(unknown)";
+	}
+}
+
+const char *get_system_type(void)
+{
+	return board_type_str();
+}
+
+void __init board_setup(void)
+{
+	/* initialize board register space */
+	bcsr_init(DB1000_BCSR_PHYS_ADDR,
+		  DB1000_BCSR_PHYS_ADDR + DB1000_BCSR_HEXLED_OFS);
+
+	printk(KERN_INFO "AMD Alchemy %s Board\n", board_type_str());
+}
+
+
+static int db1500_map_pci_irq(const struct pci_dev *d, u8 slot, u8 pin)
+{
+	if ((slot < 12) || (slot > 13) || pin == 0)
+		return -1;
+	if (slot == 12)
+		return (pin == 1) ? AU1500_PCI_INTA : 0xff;
+	if (slot == 13) {
+		switch (pin) {
+		case 1: return AU1500_PCI_INTA;
+		case 2: return AU1500_PCI_INTB;
+		case 3: return AU1500_PCI_INTC;
+		case 4: return AU1500_PCI_INTD;
+		}
+	}
+	return -1;
+}
+
+static struct resource alchemy_pci_host_res[] = {
+	[0] = {
+		.start	= AU1500_PCI_PHYS_ADDR,
+		.end	= AU1500_PCI_PHYS_ADDR + 0xfff,
+		.flags	= IORESOURCE_MEM,
+	},
+};
+
+static struct alchemy_pci_platdata db1500_pci_pd = {
+	.board_map_irq	= db1500_map_pci_irq,
+};
+
+static struct platform_device db1500_pci_host_dev = {
+	.dev.platform_data = &db1500_pci_pd,
+	.name		= "alchemy-pci",
+	.id		= 0,
+	.num_resources	= ARRAY_SIZE(alchemy_pci_host_res),
+	.resource	= alchemy_pci_host_res,
+};
+
+static int __init db1500_pci_init(void)
+{
+	if (BCSR_WHOAMI_BOARD(bcsr_read(BCSR_WHOAMI)) == BCSR_WHOAMI_DB1500)
+		return platform_device_register(&db1500_pci_host_dev);
+	return 0;
+}
+/* must be arch_initcall; MIPS PCI scans busses in a subsys_initcall */
+arch_initcall(db1500_pci_init);
+
+
+static struct resource au1100_lcd_resources[] = {
+	[0] = {
+		.start	= AU1100_LCD_PHYS_ADDR,
+		.end	= AU1100_LCD_PHYS_ADDR + 0x800 - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= AU1100_LCD_INT,
+		.end	= AU1100_LCD_INT,
+		.flags	= IORESOURCE_IRQ,
+	}
+};
+
+static u64 au1100_lcd_dmamask = DMA_BIT_MASK(32);
+
+static struct platform_device au1100_lcd_device = {
+	.name		= "au1100-lcd",
+	.id		= 0,
+	.dev = {
+		.dma_mask		= &au1100_lcd_dmamask,
+		.coherent_dma_mask	= DMA_BIT_MASK(32),
+	},
+	.num_resources	= ARRAY_SIZE(au1100_lcd_resources),
+	.resource	= au1100_lcd_resources,
+};
+
+static struct resource alchemy_ac97c_res[] = {
+	[0] = {
+		.start	= AU1000_AC97_PHYS_ADDR,
+		.end	= AU1000_AC97_PHYS_ADDR + 0xfff,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= DMA_ID_AC97C_TX,
+		.end	= DMA_ID_AC97C_TX,
+		.flags	= IORESOURCE_DMA,
+	},
+	[2] = {
+		.start	= DMA_ID_AC97C_RX,
+		.end	= DMA_ID_AC97C_RX,
+		.flags	= IORESOURCE_DMA,
+	},
+};
+
+static struct platform_device alchemy_ac97c_dev = {
+	.name		= "alchemy-ac97c",
+	.id		= -1,
+	.resource	= alchemy_ac97c_res,
+	.num_resources	= ARRAY_SIZE(alchemy_ac97c_res),
+};
+
+static struct platform_device alchemy_ac97c_dma_dev = {
+	.name		= "alchemy-pcm-dma",
+	.id		= 0,
+};
+
+static struct platform_device db1x00_codec_dev = {
+	.name		= "ac97-codec",
+	.id		= -1,
+};
+
+static struct platform_device db1x00_audio_dev = {
+	.name		= "db1000-audio",
+};
+
+/******************************************************************************/
+
+static irqreturn_t db1100_mmc_cd(int irq, void *ptr)
+{
+	void (*mmc_cd)(struct mmc_host *, unsigned long);
+	/* link against CONFIG_MMC=m */
+	mmc_cd = symbol_get(mmc_detect_change);
+	mmc_cd(ptr, msecs_to_jiffies(500));
+	symbol_put(mmc_detect_change);
+
+	return IRQ_HANDLED;
+}
+
+static int db1100_mmc_cd_setup(void *mmc_host, int en)
+{
+	int ret = 0;
+
+	if (en) {
+		irq_set_irq_type(AU1100_GPIO19_INT, IRQ_TYPE_EDGE_BOTH);
+		ret = request_irq(AU1100_GPIO19_INT, db1100_mmc_cd, 0,
+				  "sd0_cd", mmc_host);
+	} else
+		free_irq(AU1100_GPIO19_INT, mmc_host);
+	return ret;
+}
+
+static int db1100_mmc1_cd_setup(void *mmc_host, int en)
+{
+	int ret = 0;
+
+	if (en) {
+		irq_set_irq_type(AU1100_GPIO20_INT, IRQ_TYPE_EDGE_BOTH);
+		ret = request_irq(AU1100_GPIO20_INT, db1100_mmc_cd, 0,
+				  "sd1_cd", mmc_host);
+	} else
+		free_irq(AU1100_GPIO20_INT, mmc_host);
+	return ret;
+}
+
+static int db1100_mmc_card_readonly(void *mmc_host)
+{
+	/* testing suggests that this bit is inverted */
+	return (bcsr_read(BCSR_STATUS) & BCSR_STATUS_SD0WP) ? 0 : 1;
+}
+
+static int db1100_mmc_card_inserted(void *mmc_host)
+{
+	return !alchemy_gpio_get_value(19);
+}
+
+static void db1100_mmc_set_power(void *mmc_host, int state)
+{
+	if (state) {
+		bcsr_mod(BCSR_BOARD, 0, BCSR_BOARD_SD0PWR);
+		msleep(400);	/* stabilization time */
+	} else
+		bcsr_mod(BCSR_BOARD, BCSR_BOARD_SD0PWR, 0);
+}
+
+static void db1100_mmcled_set(struct led_classdev *led, enum led_brightness b)
+{
+	if (b != LED_OFF)
+		bcsr_mod(BCSR_LEDS, BCSR_LEDS_LED0, 0);
+	else
+		bcsr_mod(BCSR_LEDS, 0, BCSR_LEDS_LED0);
+}
+
+static struct led_classdev db1100_mmc_led = {
+	.brightness_set	= db1100_mmcled_set,
+};
+
+static int db1100_mmc1_card_readonly(void *mmc_host)
+{
+	return (bcsr_read(BCSR_BOARD) & BCSR_BOARD_SD1WP) ? 1 : 0;
+}
+
+static int db1100_mmc1_card_inserted(void *mmc_host)
+{
+	return !alchemy_gpio_get_value(20);
+}
+
+static void db1100_mmc1_set_power(void *mmc_host, int state)
+{
+	if (state) {
+		bcsr_mod(BCSR_BOARD, 0, BCSR_BOARD_SD1PWR);
+		msleep(400);	/* stabilization time */
+	} else
+		bcsr_mod(BCSR_BOARD, BCSR_BOARD_SD1PWR, 0);
+}
+
+static void db1100_mmc1led_set(struct led_classdev *led, enum led_brightness b)
+{
+	if (b != LED_OFF)
+		bcsr_mod(BCSR_LEDS, BCSR_LEDS_LED1, 0);
+	else
+		bcsr_mod(BCSR_LEDS, 0, BCSR_LEDS_LED1);
+}
+
+static struct led_classdev db1100_mmc1_led = {
+	.brightness_set	= db1100_mmc1led_set,
+};
+
+static struct au1xmmc_platform_data db1100_mmc_platdata[2] = {
+	[0] = {
+		.cd_setup	= db1100_mmc_cd_setup,
+		.set_power	= db1100_mmc_set_power,
+		.card_inserted	= db1100_mmc_card_inserted,
+		.card_readonly	= db1100_mmc_card_readonly,
+		.led		= &db1100_mmc_led,
+	},
+	[1] = {
+		.cd_setup	= db1100_mmc1_cd_setup,
+		.set_power	= db1100_mmc1_set_power,
+		.card_inserted	= db1100_mmc1_card_inserted,
+		.card_readonly	= db1100_mmc1_card_readonly,
+		.led		= &db1100_mmc1_led,
+	},
+};
+
+static struct resource au1100_mmc0_resources[] = {
+	[0] = {
+		.start	= AU1100_SD0_PHYS_ADDR,
+		.end	= AU1100_SD0_PHYS_ADDR + 0xfff,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= AU1100_SD_INT,
+		.end	= AU1100_SD_INT,
+		.flags	= IORESOURCE_IRQ,
+	},
+	[2] = {
+		.start	= DMA_ID_SD0_TX,
+		.end	= DMA_ID_SD0_TX,
+		.flags	= IORESOURCE_DMA,
+	},
+	[3] = {
+		.start	= DMA_ID_SD0_RX,
+		.end	= DMA_ID_SD0_RX,
+		.flags	= IORESOURCE_DMA,
+	}
+};
+
+static u64 au1xxx_mmc_dmamask =  DMA_BIT_MASK(32);
+
+static struct platform_device db1100_mmc0_dev = {
+	.name		= "au1xxx-mmc",
+	.id		= 0,
+	.dev = {
+		.dma_mask		= &au1xxx_mmc_dmamask,
+		.coherent_dma_mask	= DMA_BIT_MASK(32),
+		.platform_data		= &db1100_mmc_platdata[0],
+	},
+	.num_resources	= ARRAY_SIZE(au1100_mmc0_resources),
+	.resource	= au1100_mmc0_resources,
+};
+
+static struct resource au1100_mmc1_res[] = {
+	[0] = {
+		.start	= AU1100_SD1_PHYS_ADDR,
+		.end	= AU1100_SD1_PHYS_ADDR + 0xfff,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= AU1100_SD_INT,
+		.end	= AU1100_SD_INT,
+		.flags	= IORESOURCE_IRQ,
+	},
+	[2] = {
+		.start	= DMA_ID_SD1_TX,
+		.end	= DMA_ID_SD1_TX,
+		.flags	= IORESOURCE_DMA,
+	},
+	[3] = {
+		.start	= DMA_ID_SD1_RX,
+		.end	= DMA_ID_SD1_RX,
+		.flags	= IORESOURCE_DMA,
+	}
+};
+
+static struct platform_device db1100_mmc1_dev = {
+	.name		= "au1xxx-mmc",
+	.id		= 1,
+	.dev = {
+		.dma_mask		= &au1xxx_mmc_dmamask,
+		.coherent_dma_mask	= DMA_BIT_MASK(32),
+		.platform_data		= &db1100_mmc_platdata[1],
+	},
+	.num_resources	= ARRAY_SIZE(au1100_mmc1_res),
+	.resource	= au1100_mmc1_res,
+};
+
+/******************************************************************************/
+
+static void db1000_irda_set_phy_mode(int mode)
+{
+	unsigned short mask = BCSR_RESETS_IRDA_MODE_MASK | BCSR_RESETS_FIR_SEL;
+
+	switch (mode) {
+	case AU1000_IRDA_PHY_MODE_OFF:
+		bcsr_mod(BCSR_RESETS, mask, BCSR_RESETS_IRDA_MODE_OFF);
+		break;
+	case AU1000_IRDA_PHY_MODE_SIR:
+		bcsr_mod(BCSR_RESETS, mask, BCSR_RESETS_IRDA_MODE_FULL);
+		break;
+	case AU1000_IRDA_PHY_MODE_FIR:
+		bcsr_mod(BCSR_RESETS, mask, BCSR_RESETS_IRDA_MODE_FULL |
+					    BCSR_RESETS_FIR_SEL);
+		break;
+	}
+}
+
+static struct au1k_irda_platform_data db1000_irda_platdata = {
+	.set_phy_mode	= db1000_irda_set_phy_mode,
+};
+
+static struct resource au1000_irda_res[] = {
+	[0] = {
+		.start	= AU1000_IRDA_PHYS_ADDR,
+		.end	= AU1000_IRDA_PHYS_ADDR + 0x0fff,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= AU1000_IRDA_TX_INT,
+		.end	= AU1000_IRDA_TX_INT,
+		.flags	= IORESOURCE_IRQ,
+	},
+	[2] = {
+		.start	= AU1000_IRDA_RX_INT,
+		.end	= AU1000_IRDA_RX_INT,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device db1000_irda_dev = {
+	.name	= "au1000-irda",
+	.id	= -1,
+	.dev	= {
+		.platform_data = &db1000_irda_platdata,
+	},
+	.resource	= au1000_irda_res,
+	.num_resources	= ARRAY_SIZE(au1000_irda_res),
+};
+
+/******************************************************************************/
+
+static struct ads7846_platform_data db1100_touch_pd = {
+	.model		= 7846,
+	.vref_mv	= 3300,
+	.gpio_pendown	= 21,
+};
+
+static struct spi_gpio_platform_data db1100_spictl_pd = {
+	.sck		= 209,
+	.mosi		= 208,
+	.miso		= 207,
+	.num_chipselect = 1,
+};
+
+static struct spi_board_info db1100_spi_info[] __initdata = {
+	[0] = {
+		.modalias	 = "ads7846",
+		.max_speed_hz	 = 3250000,
+		.bus_num	 = 0,
+		.chip_select	 = 0,
+		.mode		 = 0,
+		.irq		 = AU1100_GPIO21_INT,
+		.platform_data	 = &db1100_touch_pd,
+		.controller_data = (void *)210,	/* for spi_gpio: CS# GPIO210 */
+	},
+};
+
+static struct platform_device db1100_spi_dev = {
+	.name		= "spi_gpio",
+	.id		= 0,
+	.dev		= {
+		.platform_data	= &db1100_spictl_pd,
+	},
+};
+
+
+static struct platform_device *db1x00_devs[] = {
+	&db1x00_codec_dev,
+	&alchemy_ac97c_dma_dev,
+	&alchemy_ac97c_dev,
+	&db1x00_audio_dev,
+};
+
+static struct platform_device *db1000_devs[] = {
+	&db1000_irda_dev,
+};
+
+static struct platform_device *db1100_devs[] = {
+	&au1100_lcd_device,
+	&db1100_mmc0_dev,
+	&db1100_mmc1_dev,
+	&db1000_irda_dev,
+	&db1100_spi_dev,
+};
+
+static int __init db1000_dev_init(void)
+{
+	int board = BCSR_WHOAMI_BOARD(bcsr_read(BCSR_WHOAMI));
+	int c0, c1, d0, d1, s0, s1;
+	unsigned long pfc;
+
+	if (board == BCSR_WHOAMI_DB1500) {
+		c0 = AU1500_GPIO2_INT;
+		c1 = AU1500_GPIO5_INT;
+		d0 = AU1500_GPIO0_INT;
+		d1 = AU1500_GPIO3_INT;
+		s0 = AU1500_GPIO1_INT;
+		s1 = AU1500_GPIO4_INT;
+	} else if (board == BCSR_WHOAMI_DB1100) {
+		c0 = AU1100_GPIO2_INT;
+		c1 = AU1100_GPIO5_INT;
+		d0 = AU1100_GPIO0_INT;
+		d1 = AU1100_GPIO3_INT;
+		s0 = AU1100_GPIO1_INT;
+		s1 = AU1100_GPIO4_INT;
+
+		gpio_direction_input(19);	/* sd0 cd# */
+		gpio_direction_input(20);	/* sd1 cd# */
+		gpio_direction_input(21);	/* touch pendown# */
+		gpio_direction_input(207);	/* SPI MISO */
+		gpio_direction_output(208, 0);	/* SPI MOSI */
+		gpio_direction_output(209, 1);	/* SPI SCK */
+		gpio_direction_output(210, 1);	/* SPI CS# */
+
+		/* spi_gpio on SSI0 pins */
+		pfc = __raw_readl((void __iomem *)SYS_PINFUNC);
+		pfc |= (1 << 0);	/* SSI0 pins as GPIOs */
+		__raw_writel(pfc, (void __iomem *)SYS_PINFUNC);
+		wmb();
+
+		spi_register_board_info(db1100_spi_info,
+					ARRAY_SIZE(db1100_spi_info));
+
+		platform_add_devices(db1100_devs, ARRAY_SIZE(db1100_devs));
+	} else if (board == BCSR_WHOAMI_DB1000) {
+		c0 = AU1000_GPIO2_INT;
+		c1 = AU1000_GPIO5_INT;
+		d0 = AU1000_GPIO0_INT;
+		d1 = AU1000_GPIO3_INT;
+		s0 = AU1000_GPIO1_INT;
+		s1 = AU1000_GPIO4_INT;
+		platform_add_devices(db1000_devs, ARRAY_SIZE(db1000_devs));
+	} else
+		return 0; /* unknown board, no further dev setup to do */
+
+	irq_set_irq_type(d0, IRQ_TYPE_EDGE_BOTH);
+	irq_set_irq_type(d1, IRQ_TYPE_EDGE_BOTH);
+	irq_set_irq_type(c0, IRQ_TYPE_LEVEL_LOW);
+	irq_set_irq_type(c1, IRQ_TYPE_LEVEL_LOW);
+	irq_set_irq_type(s0, IRQ_TYPE_LEVEL_LOW);
+	irq_set_irq_type(s1, IRQ_TYPE_LEVEL_LOW);
+
+	db1x_register_pcmcia_socket(
+		AU1000_PCMCIA_ATTR_PHYS_ADDR,
+		AU1000_PCMCIA_ATTR_PHYS_ADDR + 0x000400000 - 1,
+		AU1000_PCMCIA_MEM_PHYS_ADDR,
+		AU1000_PCMCIA_MEM_PHYS_ADDR  + 0x000400000 - 1,
+		AU1000_PCMCIA_IO_PHYS_ADDR,
+		AU1000_PCMCIA_IO_PHYS_ADDR   + 0x000010000 - 1,
+		c0, d0,	/*s0*/0, 0, 0);
+
+	db1x_register_pcmcia_socket(
+		AU1000_PCMCIA_ATTR_PHYS_ADDR + 0x004000000,
+		AU1000_PCMCIA_ATTR_PHYS_ADDR + 0x004400000 - 1,
+		AU1000_PCMCIA_MEM_PHYS_ADDR  + 0x004000000,
+		AU1000_PCMCIA_MEM_PHYS_ADDR  + 0x004400000 - 1,
+		AU1000_PCMCIA_IO_PHYS_ADDR   + 0x004000000,
+		AU1000_PCMCIA_IO_PHYS_ADDR   + 0x004010000 - 1,
+		c1, d1,	/*s1*/0, 0, 1);
+
+	platform_add_devices(db1x00_devs, ARRAY_SIZE(db1x00_devs));
+	db1x_register_norflash(32 << 20, 4 /* 32bit */, F_SWAPPED);
+	return 0;
+}
+device_initcall(db1000_dev_init);

arch/mips/alchemy/devboards/db1200/platform.c → arch/mips/alchemy/devboards/db1200.c

@@ -1,7 +1,7 @@
 /*
- * DBAu1200 board platform device registration
+ * DBAu1200/PBAu1200 board platform device registration
  *
- * Copyright (C) 2008-2009 Manuel Lauss
+ * Copyright (C) 2008-2011 Manuel Lauss
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
@@ -22,6 +22,7 @@
 #include <linux/gpio.h>
 #include <linux/i2c.h>
 #include <linux/init.h>
+#include <linux/interrupt.h>
 #include <linux/io.h>
 #include <linux/leds.h>
 #include <linux/mmc/host.h>
@@ -33,18 +34,116 @@
 #include <linux/spi/spi.h>
 #include <linux/spi/flash.h>
 #include <linux/smc91x.h>
-
+#include <asm/mach-au1x00/au1000.h>
 #include <asm/mach-au1x00/au1100_mmc.h>
 #include <asm/mach-au1x00/au1xxx_dbdma.h>
+#include <asm/mach-au1x00/au1200fb.h>
 #include <asm/mach-au1x00/au1550_spi.h>
 #include <asm/mach-db1x00/bcsr.h>
 #include <asm/mach-db1x00/db1200.h>
 
-#include "../platform.h"
+#include "platform.h"
+
+static const char *board_type_str(void)
+{
+	switch (BCSR_WHOAMI_BOARD(bcsr_read(BCSR_WHOAMI))) {
+	case BCSR_WHOAMI_PB1200_DDR1:
+	case BCSR_WHOAMI_PB1200_DDR2:
+		return "PB1200";
+	case BCSR_WHOAMI_DB1200:
+		return "DB1200";
+	default:
+		return "(unknown)";
+	}
+}
+
+const char *get_system_type(void)
+{
+	return board_type_str();
+}
+
+static int __init detect_board(void)
+{
+	int bid;
+
+	/* try the DB1200 first */
+	bcsr_init(DB1200_BCSR_PHYS_ADDR,
+		  DB1200_BCSR_PHYS_ADDR + DB1200_BCSR_HEXLED_OFS);
+	if (BCSR_WHOAMI_DB1200 == BCSR_WHOAMI_BOARD(bcsr_read(BCSR_WHOAMI))) {
+		unsigned short t = bcsr_read(BCSR_HEXLEDS);
+		bcsr_write(BCSR_HEXLEDS, ~t);
+		if (bcsr_read(BCSR_HEXLEDS) != t) {
+			bcsr_write(BCSR_HEXLEDS, t);
+			return 0;
+		}
+	}
+
+	/* okay, try the PB1200 then */
+	bcsr_init(PB1200_BCSR_PHYS_ADDR,
+		  PB1200_BCSR_PHYS_ADDR + PB1200_BCSR_HEXLED_OFS);
+	bid = BCSR_WHOAMI_BOARD(bcsr_read(BCSR_WHOAMI));
+	if ((bid == BCSR_WHOAMI_PB1200_DDR1) ||
+	    (bid == BCSR_WHOAMI_PB1200_DDR2)) {
+		unsigned short t = bcsr_read(BCSR_HEXLEDS);
+		bcsr_write(BCSR_HEXLEDS, ~t);
+		if (bcsr_read(BCSR_HEXLEDS) != t) {
+			bcsr_write(BCSR_HEXLEDS, t);
+			return 0;
+		}
+	}
+
+	return 1;	/* it's neither */
+}
+
+void __init board_setup(void)
+{
+	unsigned long freq0, clksrc, div, pfc;
+	unsigned short whoami;
+
+	if (detect_board()) {
+		printk(KERN_ERR "NOT running on a DB1200/PB1200 board!\n");
+		return;
+	}
+
+	whoami = bcsr_read(BCSR_WHOAMI);
+	printk(KERN_INFO "Alchemy/AMD/RMI %s Board, CPLD Rev %d"
+		"  Board-ID %d  Daughtercard ID %d\n", board_type_str(),
+		(whoami >> 4) & 0xf, (whoami >> 8) & 0xf, whoami & 0xf);
+
+	/* SMBus/SPI on PSC0, Audio on PSC1 */
+	pfc = __raw_readl((void __iomem *)SYS_PINFUNC);
+	pfc &= ~(SYS_PINFUNC_P0A | SYS_PINFUNC_P0B);
+	pfc &= ~(SYS_PINFUNC_P1A | SYS_PINFUNC_P1B | SYS_PINFUNC_FS3);
+	pfc |= SYS_PINFUNC_P1C;	/* SPI is configured later */
+	__raw_writel(pfc, (void __iomem *)SYS_PINFUNC);
+	wmb();
+
+	/* Clock configurations: PSC0: ~50MHz via Clkgen0, derived from
+	 * CPU clock; all other clock generators off/unused.
+	 */
+	div = (get_au1x00_speed() + 25000000) / 50000000;
+	if (div & 1)
+		div++;
+	div = ((div >> 1) - 1) & 0xff;
+
+	freq0 = div << SYS_FC_FRDIV0_BIT;
+	__raw_writel(freq0, (void __iomem *)SYS_FREQCTRL0);
+	wmb();
+	freq0 |= SYS_FC_FE0;	/* enable F0 */
+	__raw_writel(freq0, (void __iomem *)SYS_FREQCTRL0);
+	wmb();
+
+	/* psc0_intclk comes 1:1 from F0 */
+	clksrc = SYS_CS_MUX_FQ0 << SYS_CS_ME0_BIT;
+	__raw_writel(clksrc, (void __iomem *)SYS_CLKSRC);
+	wmb();
+}
+
+/******************************************************************************/
 
 static struct mtd_partition db1200_spiflash_parts[] = {
 	{
-		.name	= "DB1200 SPI flash",
+		.name	= "spi_flash",
 		.offset	= 0,
 		.size	= MTDPART_SIZ_FULL,
 	},
@@ -78,18 +177,9 @@ static struct spi_board_info db1200_spi_devs[] __initdata = {
 };
 
 static struct i2c_board_info db1200_i2c_devs[] __initdata = {
-	{
-		/* AT24C04-10 I2C eeprom */
-		I2C_BOARD_INFO("24c04", 0x52),
-	},
-	{
-		/* Philips NE1619 temp/voltage sensor (adm1025 drv) */
-		I2C_BOARD_INFO("ne1619", 0x2d),
-	},
-	{
-		/* I2S audio codec WM8731 */
-		I2C_BOARD_INFO("wm8731", 0x1b),
-	},
+	{ I2C_BOARD_INFO("24c04", 0x52),  }, /* AT24C04-10 I2C eeprom */
+	{ I2C_BOARD_INFO("ne1619", 0x2d), }, /* adm1025-compat hwmon */
+	{ I2C_BOARD_INFO("wm8731", 0x1b), }, /* I2S audio codec WM8731 */
 };
 
 /**********************************************************************/
@@ -206,7 +296,7 @@ static struct platform_device db1200_eth_dev = {
 static struct resource db1200_ide_res[] = {
 	[0] = {
 		.start	= DB1200_IDE_PHYS_ADDR,
-		.end 	= DB1200_IDE_PHYS_ADDR + DB1200_IDE_PHYS_LEN - 1,
+		.end	= DB1200_IDE_PHYS_ADDR + DB1200_IDE_PHYS_LEN - 1,
 		.flags	= IORESOURCE_MEM,
 	},
 	[1] = {
@@ -221,13 +311,13 @@ static struct resource db1200_ide_res[] = {
 	},
 };
 
-static u64 ide_dmamask = DMA_BIT_MASK(32);
+static u64 au1200_ide_dmamask = DMA_BIT_MASK(32);
 
 static struct platform_device db1200_ide_dev = {
 	.name		= "au1200-ide",
 	.id		= 0,
 	.dev = {
-		.dma_mask 		= &ide_dmamask,
+		.dma_mask		= &au1200_ide_dmamask,
 		.coherent_dma_mask	= DMA_BIT_MASK(32),
 	},
 	.num_resources	= ARRAY_SIZE(db1200_ide_res),
@@ -236,13 +326,6 @@ static struct platform_device db1200_ide_dev = {
 
 /**********************************************************************/
 
-static struct platform_device db1200_rtc_dev = {
-	.name	= "rtc-au1xxx",
-	.id	= -1,
-};
-
-/**********************************************************************/
-
 /* SD carddetects:  they're supposed to be edge-triggered, but ack
  * doesn't seem to work (CPLD Rev 2).  Instead, the screaming one
  * is disabled and its counterpart enabled.  The 500ms timeout is
@@ -333,12 +416,109 @@ static struct led_classdev db1200_mmc_led = {
 	.brightness_set	= db1200_mmcled_set,
 };
 
-static struct au1xmmc_platform_data db1200mmc_platdata = {
-	.cd_setup	= db1200_mmc_cd_setup,
-	.set_power	= db1200_mmc_set_power,
-	.card_inserted	= db1200_mmc_card_inserted,
-	.card_readonly	= db1200_mmc_card_readonly,
-	.led		= &db1200_mmc_led,
+/* -- */
+
+static irqreturn_t pb1200_mmc1_cd(int irq, void *ptr)
+{
+	void(*mmc_cd)(struct mmc_host *, unsigned long);
+
+	if (irq == PB1200_SD1_INSERT_INT) {
+		disable_irq_nosync(PB1200_SD1_INSERT_INT);
+		enable_irq(PB1200_SD1_EJECT_INT);
+	} else {
+		disable_irq_nosync(PB1200_SD1_EJECT_INT);
+		enable_irq(PB1200_SD1_INSERT_INT);
+	}
+
+	/* link against CONFIG_MMC=m */
+	mmc_cd = symbol_get(mmc_detect_change);
+	if (mmc_cd) {
+		mmc_cd(ptr, msecs_to_jiffies(500));
+		symbol_put(mmc_detect_change);
+	}
+
+	return IRQ_HANDLED;
+}
+
+static int pb1200_mmc1_cd_setup(void *mmc_host, int en)
+{
+	int ret;
+
+	if (en) {
+		ret = request_irq(PB1200_SD1_INSERT_INT, pb1200_mmc1_cd, 0,
+				  "sd1_insert", mmc_host);
+		if (ret)
+			goto out;
+
+		ret = request_irq(PB1200_SD1_EJECT_INT, pb1200_mmc1_cd, 0,
+				  "sd1_eject", mmc_host);
+		if (ret) {
+			free_irq(PB1200_SD1_INSERT_INT, mmc_host);
+			goto out;
+		}
+
+		if (bcsr_read(BCSR_SIGSTAT) & BCSR_INT_SD1INSERT)
+			enable_irq(PB1200_SD1_EJECT_INT);
+		else
+			enable_irq(PB1200_SD1_INSERT_INT);
+
+	} else {
+		free_irq(PB1200_SD1_INSERT_INT, mmc_host);
+		free_irq(PB1200_SD1_EJECT_INT, mmc_host);
+	}
+	ret = 0;
+out:
+	return ret;
+}
+
+static void pb1200_mmc1led_set(struct led_classdev *led,
+			enum led_brightness brightness)
+{
+	if (brightness != LED_OFF)
+			bcsr_mod(BCSR_LEDS, BCSR_LEDS_LED1, 0);
+	else
+			bcsr_mod(BCSR_LEDS, 0, BCSR_LEDS_LED1);
+}
+
+static struct led_classdev pb1200_mmc1_led = {
+	.brightness_set	= pb1200_mmc1led_set,
+};
+
+static void pb1200_mmc1_set_power(void *mmc_host, int state)
+{
+	if (state) {
+		bcsr_mod(BCSR_BOARD, 0, BCSR_BOARD_SD1PWR);
+		msleep(400);	/* stabilization time */
+	} else
+		bcsr_mod(BCSR_BOARD, BCSR_BOARD_SD1PWR, 0);
+}
+
+static int pb1200_mmc1_card_readonly(void *mmc_host)
+{
+	return (bcsr_read(BCSR_STATUS) & BCSR_STATUS_SD1WP) ? 1 : 0;
+}
+
+static int pb1200_mmc1_card_inserted(void *mmc_host)
+{
+	return (bcsr_read(BCSR_SIGSTAT) & BCSR_INT_SD1INSERT) ? 1 : 0;
+}
+
+
+static struct au1xmmc_platform_data db1200_mmc_platdata[2] = {
+	[0] = {
+		.cd_setup	= db1200_mmc_cd_setup,
+		.set_power	= db1200_mmc_set_power,
+		.card_inserted	= db1200_mmc_card_inserted,
+		.card_readonly	= db1200_mmc_card_readonly,
+		.led		= &db1200_mmc_led,
+	},
+	[1] = {
+		.cd_setup	= pb1200_mmc1_cd_setup,
+		.set_power	= pb1200_mmc1_set_power,
+		.card_inserted	= pb1200_mmc1_card_inserted,
+		.card_readonly	= pb1200_mmc1_card_readonly,
+		.led		= &pb1200_mmc1_led,
+	},
 };
 
 static struct resource au1200_mmc0_resources[] = {
@@ -372,14 +552,76 @@ static struct platform_device db1200_mmc0_dev = {
 	.dev = {
 		.dma_mask		= &au1xxx_mmc_dmamask,
 		.coherent_dma_mask	= DMA_BIT_MASK(32),
-		.platform_data		= &db1200mmc_platdata,
+		.platform_data		= &db1200_mmc_platdata[0],
 	},
 	.num_resources	= ARRAY_SIZE(au1200_mmc0_resources),
 	.resource	= au1200_mmc0_resources,
 };
 
+static struct resource au1200_mmc1_res[] = {
+	[0] = {
+		.start	= AU1100_SD1_PHYS_ADDR,
+		.end	= AU1100_SD1_PHYS_ADDR + 0xfff,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= AU1200_SD_INT,
+		.end	= AU1200_SD_INT,
+		.flags	= IORESOURCE_IRQ,
+	},
+	[2] = {
+		.start	= AU1200_DSCR_CMD0_SDMS_TX1,
+		.end	= AU1200_DSCR_CMD0_SDMS_TX1,
+		.flags	= IORESOURCE_DMA,
+	},
+	[3] = {
+		.start	= AU1200_DSCR_CMD0_SDMS_RX1,
+		.end	= AU1200_DSCR_CMD0_SDMS_RX1,
+		.flags	= IORESOURCE_DMA,
+	}
+};
+
+static struct platform_device pb1200_mmc1_dev = {
+	.name		= "au1xxx-mmc",
+	.id		= 1,
+	.dev = {
+		.dma_mask		= &au1xxx_mmc_dmamask,
+		.coherent_dma_mask	= DMA_BIT_MASK(32),
+		.platform_data		= &db1200_mmc_platdata[1],
+	},
+	.num_resources	= ARRAY_SIZE(au1200_mmc1_res),
+	.resource	= au1200_mmc1_res,
+};
+
 /**********************************************************************/
 
+static int db1200fb_panel_index(void)
+{
+	return (bcsr_read(BCSR_SWITCHES) >> 8) & 0x0f;
+}
+
+static int db1200fb_panel_init(void)
+{
+	/* Apply power */
+	bcsr_mod(BCSR_BOARD, 0, BCSR_BOARD_LCDVEE | BCSR_BOARD_LCDVDD |
+				BCSR_BOARD_LCDBL);
+	return 0;
+}
+
+static int db1200fb_panel_shutdown(void)
+{
+	/* Remove power */
+	bcsr_mod(BCSR_BOARD, BCSR_BOARD_LCDVEE | BCSR_BOARD_LCDVDD |
+			     BCSR_BOARD_LCDBL, 0);
+	return 0;
+}
+
+static struct au1200fb_platdata db1200fb_pd = {
+	.panel_index	= db1200fb_panel_index,
+	.panel_init	= db1200fb_panel_init,
+	.panel_shutdown	= db1200fb_panel_shutdown,
+};
+
 static struct resource au1200_lcd_res[] = {
 	[0] = {
 		.start	= AU1200_LCD_PHYS_ADDR,
@@ -401,6 +643,7 @@ static struct platform_device au1200_lcd_dev = {
 	.dev = {
 		.dma_mask		= &au1200_lcd_dmamask,
 		.coherent_dma_mask	= DMA_BIT_MASK(32),
+		.platform_data		= &db1200fb_pd,
 	},
 	.num_resources	= ARRAY_SIZE(au1200_lcd_res),
 	.resource	= au1200_lcd_res,
@@ -519,7 +762,6 @@ static struct platform_device *db1200_devs[] __initdata = {
 	&db1200_mmc0_dev,
 	&au1200_lcd_dev,
 	&db1200_eth_dev,
-	&db1200_rtc_dev,
 	&db1200_nand_dev,
 	&db1200_audiodma_dev,
 	&db1200_audio_dev,
@@ -527,11 +769,62 @@ static struct platform_device *db1200_devs[] __initdata = {
 	&db1200_sound_dev,
 };
 
+static struct platform_device *pb1200_devs[] __initdata = {
+	&pb1200_mmc1_dev,
+};
+
+/* Some peripheral base addresses differ on the PB1200 */
+static int __init pb1200_res_fixup(void)
+{
+	/* CPLD Revs earlier than 4 cause problems */
+	if (BCSR_WHOAMI_CPLD(bcsr_read(BCSR_WHOAMI)) <= 3) {
+		printk(KERN_ERR "WARNING!!!\n");
+		printk(KERN_ERR "WARNING!!!\n");
+		printk(KERN_ERR "PB1200 must be at CPLD rev 4. Please have\n");
+		printk(KERN_ERR "the board updated to latest revisions.\n");
+		printk(KERN_ERR "This software will not work reliably\n");
+		printk(KERN_ERR "on anything older than CPLD rev 4.!\n");
+		printk(KERN_ERR "WARNING!!!\n");
+		printk(KERN_ERR "WARNING!!!\n");
+		return 1;
+	}
+
+	db1200_nand_res[0].start = PB1200_NAND_PHYS_ADDR;
+	db1200_nand_res[0].end   = PB1200_NAND_PHYS_ADDR + 0xff;
+	db1200_ide_res[0].start = PB1200_IDE_PHYS_ADDR;
+	db1200_ide_res[0].end   = PB1200_IDE_PHYS_ADDR + DB1200_IDE_PHYS_LEN - 1;
+	db1200_eth_res[0].start = PB1200_ETH_PHYS_ADDR;
+	db1200_eth_res[0].end   = PB1200_ETH_PHYS_ADDR + 0xff;
+	return 0;
+}
+
 static int __init db1200_dev_init(void)
 {
 	unsigned long pfc;
 	unsigned short sw;
-	int swapped;
+	int swapped, bid;
+
+	bid = BCSR_WHOAMI_BOARD(bcsr_read(BCSR_WHOAMI));
+	if ((bid == BCSR_WHOAMI_PB1200_DDR1) ||
+	    (bid == BCSR_WHOAMI_PB1200_DDR2)) {
+		if (pb1200_res_fixup())
+			return -ENODEV;
+	}
+
+	/* GPIO7 is low-level triggered CPLD cascade */
+	irq_set_irq_type(AU1200_GPIO7_INT, IRQ_TYPE_LEVEL_LOW);
+	bcsr_init_irq(DB1200_INT_BEGIN, DB1200_INT_END, AU1200_GPIO7_INT);
+
+	/* insert/eject pairs: one of both is always screaming.  To avoid
+	 * issues they must not be automatically enabled when initially
+	 * requested.
+	 */
+	irq_set_status_flags(DB1200_SD0_INSERT_INT, IRQ_NOAUTOEN);
+	irq_set_status_flags(DB1200_SD0_EJECT_INT, IRQ_NOAUTOEN);
+	irq_set_status_flags(DB1200_PC0_INSERT_INT, IRQ_NOAUTOEN);
+	irq_set_status_flags(DB1200_PC0_EJECT_INT, IRQ_NOAUTOEN);
+	irq_set_status_flags(DB1200_PC1_INSERT_INT, IRQ_NOAUTOEN);
+	irq_set_status_flags(DB1200_PC1_EJECT_INT, IRQ_NOAUTOEN);
 
 	i2c_register_board_info(0, db1200_i2c_devs,
 				ARRAY_SIZE(db1200_i2c_devs));
@@ -540,6 +833,7 @@ static int __init db1200_dev_init(void)
 
 	/* SWITCHES:	S6.8 I2C/SPI selector  (OFF=I2C  ON=SPI)
 	 *		S6.7 AC97/I2S selector (OFF=AC97 ON=I2S)
+	 *		or S12 on the PB1200.
 	 */
 
 	/* NOTE: GPIO215 controls OTG VBUS supply.  In SPI mode however
@@ -554,7 +848,7 @@ static int __init db1200_dev_init(void)
 	gpio_request(215, "otg-vbus");
 	gpio_direction_output(215, 1);
 
-	printk(KERN_INFO "DB1200 device configuration:\n");
+	printk(KERN_INFO "%s device configuration:\n", board_type_str());
 
 	sw = bcsr_read(BCSR_SWITCHES);
 	if (sw & BCSR_SWITCHES_DIP_8) {
@@ -595,7 +889,7 @@ static int __init db1200_dev_init(void)
 
 	/* Audio PSC clock is supplied externally. (FIXME: platdata!!) */
 	__raw_writel(PSC_SEL_CLK_SERCLK,
-		(void __iomem *)KSEG1ADDR(AU1550_PSC1_PHYS_ADDR) + PSC_SEL_OFFSET);
+	    (void __iomem *)KSEG1ADDR(AU1550_PSC1_PHYS_ADDR) + PSC_SEL_OFFSET);
 	wmb();
 
 	db1x_register_pcmcia_socket(
@@ -621,28 +915,13 @@ static int __init db1200_dev_init(void)
 	swapped = bcsr_read(BCSR_STATUS) & BCSR_STATUS_DB1200_SWAPBOOT;
 	db1x_register_norflash(64 << 20, 2, swapped);
 
-	return platform_add_devices(db1200_devs, ARRAY_SIZE(db1200_devs));
-}
-device_initcall(db1200_dev_init);
-
-/* au1200fb calls these: STERBT EINEN TRAGISCHEN TOD!!! */
-int board_au1200fb_panel(void)
-{
-	return (bcsr_read(BCSR_SWITCHES) >> 8) & 0x0f;
-}
+	platform_add_devices(db1200_devs, ARRAY_SIZE(db1200_devs));
 
-int board_au1200fb_panel_init(void)
-{
-	/* Apply power */
-	bcsr_mod(BCSR_BOARD, 0, BCSR_BOARD_LCDVEE | BCSR_BOARD_LCDVDD |
-				BCSR_BOARD_LCDBL);
-	return 0;
-}
+	/* PB1200 is a DB1200 with a 2nd MMC and Camera connector */
+	if ((bid == BCSR_WHOAMI_PB1200_DDR1) ||
+	    (bid == BCSR_WHOAMI_PB1200_DDR2))
+		platform_add_devices(pb1200_devs, ARRAY_SIZE(pb1200_devs));
 
-int board_au1200fb_panel_shutdown(void)
-{
-	/* Remove power */
-	bcsr_mod(BCSR_BOARD, BCSR_BOARD_LCDVEE | BCSR_BOARD_LCDVDD |
-			     BCSR_BOARD_LCDBL, 0);
 	return 0;
 }
+device_initcall(db1200_dev_init);

arch/mips/alchemy/devboards/db1200/Makefile

@@ -1 +0,0 @@
-obj-y += setup.o platform.o

arch/mips/alchemy/devboards/db1200/setup.c

@@ -1,81 +0,0 @@
-/*
- * Alchemy/AMD/RMI DB1200 board setup.
- *
- * Licensed under the terms outlined in the file COPYING in the root of
- * this source archive.
- */
-
-#include <linux/init.h>
-#include <linux/interrupt.h>
-#include <linux/io.h>
-#include <linux/kernel.h>
-#include <asm/mach-au1x00/au1000.h>
-#include <asm/mach-db1x00/bcsr.h>
-#include <asm/mach-db1x00/db1200.h>
-
-const char *get_system_type(void)
-{
-	return "Alchemy Db1200";
-}
-
-void __init board_setup(void)
-{
-	unsigned long freq0, clksrc, div, pfc;
-	unsigned short whoami;
-
-	bcsr_init(DB1200_BCSR_PHYS_ADDR,
-		  DB1200_BCSR_PHYS_ADDR + DB1200_BCSR_HEXLED_OFS);
-
-	whoami = bcsr_read(BCSR_WHOAMI);
-	printk(KERN_INFO "Alchemy/AMD/RMI DB1200 Board, CPLD Rev %d"
-		"  Board-ID %d  Daughtercard ID %d\n",
-		(whoami >> 4) & 0xf, (whoami >> 8) & 0xf, whoami & 0xf);
-
-	/* SMBus/SPI on PSC0, Audio on PSC1 */
-	pfc = __raw_readl((void __iomem *)SYS_PINFUNC);
-	pfc &= ~(SYS_PINFUNC_P0A | SYS_PINFUNC_P0B);
-	pfc &= ~(SYS_PINFUNC_P1A | SYS_PINFUNC_P1B | SYS_PINFUNC_FS3);
-	pfc |= SYS_PINFUNC_P1C;	/* SPI is configured later */
-	__raw_writel(pfc, (void __iomem *)SYS_PINFUNC);
-	wmb();
-
-	/* Clock configurations: PSC0: ~50MHz via Clkgen0, derived from
-	 * CPU clock; all other clock generators off/unused.
-	 */
-	div = (get_au1x00_speed() + 25000000) / 50000000;
-	if (div & 1)
-		div++;
-	div = ((div >> 1) - 1) & 0xff;
-
-	freq0 = div << SYS_FC_FRDIV0_BIT;
-	__raw_writel(freq0, (void __iomem *)SYS_FREQCTRL0);
-	wmb();
-	freq0 |= SYS_FC_FE0;	/* enable F0 */
-	__raw_writel(freq0, (void __iomem *)SYS_FREQCTRL0);
-	wmb();
-
-	/* psc0_intclk comes 1:1 from F0 */
-	clksrc = SYS_CS_MUX_FQ0 << SYS_CS_ME0_BIT;
-	__raw_writel(clksrc, (void __iomem *)SYS_CLKSRC);
-	wmb();
-}
-
-static int __init db1200_arch_init(void)
-{
-	/* GPIO7 is low-level triggered CPLD cascade */
-	irq_set_irq_type(AU1200_GPIO7_INT, IRQF_TRIGGER_LOW);
-	bcsr_init_irq(DB1200_INT_BEGIN, DB1200_INT_END, AU1200_GPIO7_INT);
-
-	/* insert/eject pairs: one of both is always screaming.  To avoid
-	 * issues they must not be automatically enabled when initially
-	 * requested.
-	 */
-	irq_set_status_flags(DB1200_SD0_INSERT_INT, IRQ_NOAUTOEN);
-	irq_set_status_flags(DB1200_SD0_EJECT_INT, IRQ_NOAUTOEN);
-	irq_set_status_flags(DB1200_PC0_INSERT_INT, IRQ_NOAUTOEN);
-	irq_set_status_flags(DB1200_PC0_EJECT_INT, IRQ_NOAUTOEN);
-	irq_set_status_flags(DB1200_PC1_INSERT_INT, IRQ_NOAUTOEN);
-	irq_set_status_flags(DB1200_PC1_EJECT_INT, IRQ_NOAUTOEN);
-	return 0;
-}
-arch_initcall(db1200_arch_init);

arch/mips/alchemy/devboards/db1300.c

@@ -0,0 +1,785 @@
+/*
+ * DBAu1300 init and platform device setup.
+ *
+ * (c) 2009 Manuel Lauss <manuel.lauss@googlemail.com>
+ */
+
+#include <linux/dma-mapping.h>
+#include <linux/gpio.h>
+#include <linux/gpio_keys.h>
+#include <linux/init.h>
+#include <linux/input.h>	/* KEY_* codes */
+#include <linux/i2c.h>
+#include <linux/io.h>
+#include <linux/leds.h>
+#include <linux/ata_platform.h>
+#include <linux/mmc/host.h>
+#include <linux/module.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/nand.h>
+#include <linux/mtd/partitions.h>
+#include <linux/platform_device.h>
+#include <linux/smsc911x.h>
+
+#include <asm/mach-au1x00/au1000.h>
+#include <asm/mach-au1x00/au1100_mmc.h>
+#include <asm/mach-au1x00/au1200fb.h>
+#include <asm/mach-au1x00/au1xxx_dbdma.h>
+#include <asm/mach-au1x00/au1xxx_psc.h>
+#include <asm/mach-db1x00/db1300.h>
+#include <asm/mach-db1x00/bcsr.h>
+#include <asm/mach-au1x00/prom.h>
+
+#include "platform.h"
+
+static struct i2c_board_info db1300_i2c_devs[] __initdata = {
+	{ I2C_BOARD_INFO("wm8731", 0x1b), },	/* I2S audio codec */
+	{ I2C_BOARD_INFO("ne1619", 0x2d), },	/* adm1025-compat hwmon */
+};
+
+/* multifunction pins to assign to GPIO controller */
+static int db1300_gpio_pins[] __initdata = {
+	AU1300_PIN_LCDPWM0, AU1300_PIN_PSC2SYNC1, AU1300_PIN_WAKE1,
+	AU1300_PIN_WAKE2, AU1300_PIN_WAKE3, AU1300_PIN_FG3AUX,
+	AU1300_PIN_EXTCLK1,
+	-1,	/* terminator */
+};
+
+/* multifunction pins to assign to device functions */
+static int db1300_dev_pins[] __initdata = {
+	/* wake-from-str pins 0-3 */
+	AU1300_PIN_WAKE0,
+	/* external clock sources for PSC0 */
+	AU1300_PIN_EXTCLK0,
+	/* 8bit MMC interface on SD0: 6-9 */
+	AU1300_PIN_SD0DAT4, AU1300_PIN_SD0DAT5, AU1300_PIN_SD0DAT6,
+	AU1300_PIN_SD0DAT7,
+	/* UART1 pins: 11-18 */
+	AU1300_PIN_U1RI, AU1300_PIN_U1DCD, AU1300_PIN_U1DSR,
+	AU1300_PIN_U1CTS, AU1300_PIN_U1RTS, AU1300_PIN_U1DTR,
+	AU1300_PIN_U1RX, AU1300_PIN_U1TX,
+	/* UART0 pins: 19-24 */
+	AU1300_PIN_U0RI, AU1300_PIN_U0DCD, AU1300_PIN_U0DSR,
+	AU1300_PIN_U0CTS, AU1300_PIN_U0RTS, AU1300_PIN_U0DTR,
+	/* UART2: 25-26 */
+	AU1300_PIN_U2RX, AU1300_PIN_U2TX,
+	/* UART3: 27-28 */
+	AU1300_PIN_U3RX, AU1300_PIN_U3TX,
+	/* LCD controller PWMs, ext pixclock: 30-31 */
+	AU1300_PIN_LCDPWM1, AU1300_PIN_LCDCLKIN,
+	/* SD1 interface: 32-37 */
+	AU1300_PIN_SD1DAT0, AU1300_PIN_SD1DAT1, AU1300_PIN_SD1DAT2,
+	AU1300_PIN_SD1DAT3, AU1300_PIN_SD1CMD, AU1300_PIN_SD1CLK,
+	/* SD2 interface: 38-43 */
+	AU1300_PIN_SD2DAT0, AU1300_PIN_SD2DAT1, AU1300_PIN_SD2DAT2,
+	AU1300_PIN_SD2DAT3, AU1300_PIN_SD2CMD, AU1300_PIN_SD2CLK,
+	/* PSC0/1 clocks: 44-45 */
+	AU1300_PIN_PSC0CLK, AU1300_PIN_PSC1CLK,
+	/* PSCs: 46-49/50-53/54-57/58-61 */
+	AU1300_PIN_PSC0SYNC0, AU1300_PIN_PSC0SYNC1, AU1300_PIN_PSC0D0,
+	AU1300_PIN_PSC0D1,
+	AU1300_PIN_PSC1SYNC0, AU1300_PIN_PSC1SYNC1, AU1300_PIN_PSC1D0,
+	AU1300_PIN_PSC1D1,
+	AU1300_PIN_PSC2SYNC0,                       AU1300_PIN_PSC2D0,
+	AU1300_PIN_PSC2D1,
+	AU1300_PIN_PSC3SYNC0, AU1300_PIN_PSC3SYNC1, AU1300_PIN_PSC3D0,
+	AU1300_PIN_PSC3D1,
+	/* PCMCIA interface: 62-70 */
+	AU1300_PIN_PCE2, AU1300_PIN_PCE1, AU1300_PIN_PIOS16,
+	AU1300_PIN_PIOR, AU1300_PIN_PWE, AU1300_PIN_PWAIT,
+	AU1300_PIN_PREG, AU1300_PIN_POE, AU1300_PIN_PIOW,
+	/* camera interface H/V sync inputs: 71-72 */
+	AU1300_PIN_CIMLS, AU1300_PIN_CIMFS,
+	/* PSC2/3 clocks: 73-74 */
+	AU1300_PIN_PSC2CLK, AU1300_PIN_PSC3CLK,
+	-1,	/* terminator */
+};
+
+static void __init db1300_gpio_config(void)
+{
+	int *i;
+
+	i = &db1300_dev_pins[0];
+	while (*i != -1)
+		au1300_pinfunc_to_dev(*i++);
+
+	i = &db1300_gpio_pins[0];
+	while (*i != -1)
+		au1300_gpio_direction_input(*i++);/* implies pin_to_gpio */
+
+	au1300_set_dbdma_gpio(1, AU1300_PIN_FG3AUX);
+}
+
+char *get_system_type(void)
+{
+	return "DB1300";
+}
+
+/**********************************************************************/
+
+static void au1300_nand_cmd_ctrl(struct mtd_info *mtd, int cmd,
+				 unsigned int ctrl)
+{
+	struct nand_chip *this = mtd->priv;
+	unsigned long ioaddr = (unsigned long)this->IO_ADDR_W;
+
+	ioaddr &= 0xffffff00;
+
+	if (ctrl & NAND_CLE) {
+		ioaddr += MEM_STNAND_CMD;
+	} else if (ctrl & NAND_ALE) {
+		ioaddr += MEM_STNAND_ADDR;
+	} else {
+		/* assume we want to r/w real data  by default */
+		ioaddr += MEM_STNAND_DATA;
+	}
+	this->IO_ADDR_R = this->IO_ADDR_W = (void __iomem *)ioaddr;
+	if (cmd != NAND_CMD_NONE) {
+		__raw_writeb(cmd, this->IO_ADDR_W);
+		wmb();
+	}
+}
+
+static int au1300_nand_device_ready(struct mtd_info *mtd)
+{
+	return __raw_readl((void __iomem *)MEM_STSTAT) & 1;
+}
+
+static const char *db1300_part_probes[] = { "cmdlinepart", NULL };
+
+static struct mtd_partition db1300_nand_parts[] = {
+	{
+		.name	= "NAND FS 0",
+		.offset	= 0,
+		.size	= 8 * 1024 * 1024,
+	},
+	{
+		.name	= "NAND FS 1",
+		.offset	= MTDPART_OFS_APPEND,
+		.size	= MTDPART_SIZ_FULL
+	},
+};
+
+struct platform_nand_data db1300_nand_platdata = {
+	.chip = {
+		.nr_chips	= 1,
+		.chip_offset	= 0,
+		.nr_partitions	= ARRAY_SIZE(db1300_nand_parts),
+		.partitions	= db1300_nand_parts,
+		.chip_delay	= 20,
+		.part_probe_types = db1300_part_probes,
+	},
+	.ctrl = {
+		.dev_ready	= au1300_nand_device_ready,
+		.cmd_ctrl	= au1300_nand_cmd_ctrl,
+	},
+};
+
+static struct resource db1300_nand_res[] = {
+	[0] = {
+		.start	= DB1300_NAND_PHYS_ADDR,
+		.end	= DB1300_NAND_PHYS_ADDR + 0xff,
+		.flags	= IORESOURCE_MEM,
+	},
+};
+
+static struct platform_device db1300_nand_dev = {
+	.name		= "gen_nand",
+	.num_resources	= ARRAY_SIZE(db1300_nand_res),
+	.resource	= db1300_nand_res,
+	.id		= -1,
+	.dev		= {
+		.platform_data = &db1300_nand_platdata,
+	}
+};
+
+/**********************************************************************/
+
+static struct resource db1300_eth_res[] = {
+	[0] = {
+		.start		= DB1300_ETH_PHYS_ADDR,
+		.end		= DB1300_ETH_PHYS_END,
+		.flags		= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start		= DB1300_ETH_INT,
+		.end		= DB1300_ETH_INT,
+		.flags		= IORESOURCE_IRQ,
+	},
+};
+
+static struct smsc911x_platform_config db1300_eth_config = {
+	.phy_interface		= PHY_INTERFACE_MODE_MII,
+	.irq_polarity		= SMSC911X_IRQ_POLARITY_ACTIVE_LOW,
+	.irq_type		= SMSC911X_IRQ_TYPE_PUSH_PULL,
+	.flags			= SMSC911X_USE_32BIT,
+};
+
+static struct platform_device db1300_eth_dev = {
+	.name			= "smsc911x",
+	.id			= -1,
+	.num_resources		= ARRAY_SIZE(db1300_eth_res),
+	.resource		= db1300_eth_res,
+	.dev = {
+		.platform_data	= &db1300_eth_config,
+	},
+};
+
+/**********************************************************************/
+
+static struct resource au1300_psc1_res[] = {
+	[0] = {
+		.start	= AU1300_PSC1_PHYS_ADDR,
+		.end	= AU1300_PSC1_PHYS_ADDR + 0x0fff,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= AU1300_PSC1_INT,
+		.end	= AU1300_PSC1_INT,
+		.flags	= IORESOURCE_IRQ,
+	},
+	[2] = {
+		.start	= AU1300_DSCR_CMD0_PSC1_TX,
+		.end	= AU1300_DSCR_CMD0_PSC1_TX,
+		.flags	= IORESOURCE_DMA,
+	},
+	[3] = {
+		.start	= AU1300_DSCR_CMD0_PSC1_RX,
+		.end	= AU1300_DSCR_CMD0_PSC1_RX,
+		.flags	= IORESOURCE_DMA,
+	},
+};
+
+static struct platform_device db1300_ac97_dev = {
+	.name		= "au1xpsc_ac97",
+	.id		= 1,	/* PSC ID. match with AC97 codec ID! */
+	.num_resources	= ARRAY_SIZE(au1300_psc1_res),
+	.resource	= au1300_psc1_res,
+};
+
+/**********************************************************************/
+
+static struct resource au1300_psc2_res[] = {
+	[0] = {
+		.start	= AU1300_PSC2_PHYS_ADDR,
+		.end	= AU1300_PSC2_PHYS_ADDR + 0x0fff,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= AU1300_PSC2_INT,
+		.end	= AU1300_PSC2_INT,
+		.flags	= IORESOURCE_IRQ,
+	},
+	[2] = {
+		.start	= AU1300_DSCR_CMD0_PSC2_TX,
+		.end	= AU1300_DSCR_CMD0_PSC2_TX,
+		.flags	= IORESOURCE_DMA,
+	},
+	[3] = {
+		.start	= AU1300_DSCR_CMD0_PSC2_RX,
+		.end	= AU1300_DSCR_CMD0_PSC2_RX,
+		.flags	= IORESOURCE_DMA,
+	},
+};
+
+static struct platform_device db1300_i2s_dev = {
+	.name		= "au1xpsc_i2s",
+	.id		= 2,	/* PSC ID */
+	.num_resources	= ARRAY_SIZE(au1300_psc2_res),
+	.resource	= au1300_psc2_res,
+};
+
+/**********************************************************************/
+
+static struct resource au1300_psc3_res[] = {
+	[0] = {
+		.start	= AU1300_PSC3_PHYS_ADDR,
+		.end	= AU1300_PSC3_PHYS_ADDR + 0x0fff,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= AU1300_PSC3_INT,
+		.end	= AU1300_PSC3_INT,
+		.flags	= IORESOURCE_IRQ,
+	},
+	[2] = {
+		.start	= AU1300_DSCR_CMD0_PSC3_TX,
+		.end	= AU1300_DSCR_CMD0_PSC3_TX,
+		.flags	= IORESOURCE_DMA,
+	},
+	[3] = {
+		.start	= AU1300_DSCR_CMD0_PSC3_RX,
+		.end	= AU1300_DSCR_CMD0_PSC3_RX,
+		.flags	= IORESOURCE_DMA,
+	},
+};
+
+static struct platform_device db1300_i2c_dev = {
+	.name		= "au1xpsc_smbus",
+	.id		= 0,	/* bus number */
+	.num_resources	= ARRAY_SIZE(au1300_psc3_res),
+	.resource	= au1300_psc3_res,
+};
+
+/**********************************************************************/
+
+/* proper key assignments when facing the LCD panel.  For key assignments
+ * according to the schematics swap up with down and left with right.
+ * I chose to use it to emulate the arrow keys of a keyboard.
+ */
+static struct gpio_keys_button db1300_5waysw_arrowkeys[] = {
+	{
+		.code			= KEY_DOWN,
+		.gpio			= AU1300_PIN_LCDPWM0,
+		.type			= EV_KEY,
+		.debounce_interval	= 1,
+		.active_low		= 1,
+		.desc			= "5waysw-down",
+	},
+	{
+		.code			= KEY_UP,
+		.gpio			= AU1300_PIN_PSC2SYNC1,
+		.type			= EV_KEY,
+		.debounce_interval	= 1,
+		.active_low		= 1,
+		.desc			= "5waysw-up",
+	},
+	{
+		.code			= KEY_RIGHT,
+		.gpio			= AU1300_PIN_WAKE3,
+		.type			= EV_KEY,
+		.debounce_interval	= 1,
+		.active_low		= 1,
+		.desc			= "5waysw-right",
+	},
+	{
+		.code			= KEY_LEFT,
+		.gpio			= AU1300_PIN_WAKE2,
+		.type			= EV_KEY,
+		.debounce_interval	= 1,
+		.active_low		= 1,
+		.desc			= "5waysw-left",
+	},
+	{
+		.code			= KEY_ENTER,
+		.gpio			= AU1300_PIN_WAKE1,
+		.type			= EV_KEY,
+		.debounce_interval	= 1,
+		.active_low		= 1,
+		.desc			= "5waysw-push",
+	},
+};
+
+static struct gpio_keys_platform_data db1300_5waysw_data = {
+	.buttons	= db1300_5waysw_arrowkeys,
+	.nbuttons	= ARRAY_SIZE(db1300_5waysw_arrowkeys),
+	.rep		= 1,
+	.name		= "db1300-5wayswitch",
+};
+
+static struct platform_device db1300_5waysw_dev = {
+	.name		= "gpio-keys",
+	.dev	= {
+		.platform_data	= &db1300_5waysw_data,
+	},
+};
+
+/**********************************************************************/
+
+static struct pata_platform_info db1300_ide_info = {
+	.ioport_shift	= DB1300_IDE_REG_SHIFT,
+};
+
+#define IDE_ALT_START	(14 << DB1300_IDE_REG_SHIFT)
+static struct resource db1300_ide_res[] = {
+	[0] = {
+		.start	= DB1300_IDE_PHYS_ADDR,
+		.end	= DB1300_IDE_PHYS_ADDR + IDE_ALT_START - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= DB1300_IDE_PHYS_ADDR + IDE_ALT_START,
+		.end	= DB1300_IDE_PHYS_ADDR + DB1300_IDE_PHYS_LEN - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	[2] = {
+		.start	= DB1300_IDE_INT,
+		.end	= DB1300_IDE_INT,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device db1300_ide_dev = {
+	.dev	= {
+		.platform_data	= &db1300_ide_info,
+	},
+	.name		= "pata_platform",
+	.resource	= db1300_ide_res,
+	.num_resources	= ARRAY_SIZE(db1300_ide_res),
+};
+
+/**********************************************************************/
+
+static irqreturn_t db1300_mmc_cd(int irq, void *ptr)
+{
+	void(*mmc_cd)(struct mmc_host *, unsigned long);
+
+	/* disable the one currently screaming. No other way to shut it up */
+	if (irq == DB1300_SD1_INSERT_INT) {
+		disable_irq_nosync(DB1300_SD1_INSERT_INT);
+		enable_irq(DB1300_SD1_EJECT_INT);
+	} else {
+		disable_irq_nosync(DB1300_SD1_EJECT_INT);
+		enable_irq(DB1300_SD1_INSERT_INT);
+	}
+
+	/* link against CONFIG_MMC=m.  We can only be called once MMC core has
+	 * initialized the controller, so symbol_get() should always succeed.
+	 */
+	mmc_cd = symbol_get(mmc_detect_change);
+	mmc_cd(ptr, msecs_to_jiffies(500));
+	symbol_put(mmc_detect_change);
+
+	return IRQ_HANDLED;
+}
+
+static int db1300_mmc_card_readonly(void *mmc_host)
+{
+	/* it uses SD1 interface, but the DB1200's SD0 bit in the CPLD */
+	return bcsr_read(BCSR_STATUS) & BCSR_STATUS_SD0WP;
+}
+
+static int db1300_mmc_card_inserted(void *mmc_host)
+{
+	return bcsr_read(BCSR_SIGSTAT) & (1 << 12); /* insertion irq signal */
+}
+
+static int db1300_mmc_cd_setup(void *mmc_host, int en)
+{
+	int ret;
+
+	if (en) {
+		ret = request_irq(DB1300_SD1_INSERT_INT, db1300_mmc_cd, 0,
+				  "sd_insert", mmc_host);
+		if (ret)
+			goto out;
+
+		ret = request_irq(DB1300_SD1_EJECT_INT, db1300_mmc_cd, 0,
+				  "sd_eject", mmc_host);
+		if (ret) {
+			free_irq(DB1300_SD1_INSERT_INT, mmc_host);
+			goto out;
+		}
+
+		if (db1300_mmc_card_inserted(mmc_host))
+			enable_irq(DB1300_SD1_EJECT_INT);
+		else
+			enable_irq(DB1300_SD1_INSERT_INT);
+
+	} else {
+		free_irq(DB1300_SD1_INSERT_INT, mmc_host);
+		free_irq(DB1300_SD1_EJECT_INT, mmc_host);
+	}
+	ret = 0;
+out:
+	return ret;
+}
+
+static void db1300_mmcled_set(struct led_classdev *led,
+			      enum led_brightness brightness)
+{
+	if (brightness != LED_OFF)
+		bcsr_mod(BCSR_LEDS, BCSR_LEDS_LED0, 0);
+	else
+		bcsr_mod(BCSR_LEDS, 0, BCSR_LEDS_LED0);
+}
+
+static struct led_classdev db1300_mmc_led = {
+	.brightness_set	= db1300_mmcled_set,
+};
+
+struct au1xmmc_platform_data db1300_sd1_platdata = {
+	.cd_setup	= db1300_mmc_cd_setup,
+	.card_inserted	= db1300_mmc_card_inserted,
+	.card_readonly	= db1300_mmc_card_readonly,
+	.led		= &db1300_mmc_led,
+};
+
+static struct resource au1300_sd1_res[] = {
+	[0] = {
+		.start	= AU1300_SD1_PHYS_ADDR,
+		.end	= AU1300_SD1_PHYS_ADDR,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= AU1300_SD1_INT,
+		.end	= AU1300_SD1_INT,
+		.flags	= IORESOURCE_IRQ,
+	},
+	[2] = {
+		.start	= AU1300_DSCR_CMD0_SDMS_TX1,
+		.end	= AU1300_DSCR_CMD0_SDMS_TX1,
+		.flags	= IORESOURCE_DMA,
+	},
+	[3] = {
+		.start	= AU1300_DSCR_CMD0_SDMS_RX1,
+		.end	= AU1300_DSCR_CMD0_SDMS_RX1,
+		.flags	= IORESOURCE_DMA,
+	},
+};
+
+static struct platform_device db1300_sd1_dev = {
+	.dev = {
+		.platform_data	= &db1300_sd1_platdata,
+	},
+	.name		= "au1xxx-mmc",
+	.id		= 1,
+	.resource	= au1300_sd1_res,
+	.num_resources	= ARRAY_SIZE(au1300_sd1_res),
+};
+
+/**********************************************************************/
+
+static int db1300_movinand_inserted(void *mmc_host)
+{
+	return 0; /* disable for now, it doesn't work yet */
+}
+
+static int db1300_movinand_readonly(void *mmc_host)
+{
+	return 0;
+}
+
+static void db1300_movinand_led_set(struct led_classdev *led,
+				    enum led_brightness brightness)
+{
+	if (brightness != LED_OFF)
+		bcsr_mod(BCSR_LEDS, BCSR_LEDS_LED1, 0);
+	else
+		bcsr_mod(BCSR_LEDS, 0, BCSR_LEDS_LED1);
+}
+
+static struct led_classdev db1300_movinand_led = {
+	.brightness_set		= db1300_movinand_led_set,
+};
+
+struct au1xmmc_platform_data db1300_sd0_platdata = {
+	.card_inserted		= db1300_movinand_inserted,
+	.card_readonly		= db1300_movinand_readonly,
+	.led			= &db1300_movinand_led,
+	.mask_host_caps		= MMC_CAP_NEEDS_POLL,
+};
+
+static struct resource au1300_sd0_res[] = {
+	[0] = {
+		.start	= AU1100_SD0_PHYS_ADDR,
+		.end	= AU1100_SD0_PHYS_ADDR,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= AU1300_SD0_INT,
+		.end	= AU1300_SD0_INT,
+		.flags	= IORESOURCE_IRQ,
+	},
+	[2] = {
+		.start	= AU1300_DSCR_CMD0_SDMS_TX0,
+		.end	= AU1300_DSCR_CMD0_SDMS_TX0,
+		.flags	= IORESOURCE_DMA,
+	},
+	[3] = {
+		.start	= AU1300_DSCR_CMD0_SDMS_RX0,
+		.end	= AU1300_DSCR_CMD0_SDMS_RX0,
+		.flags	= IORESOURCE_DMA,
+	},
+};
+
+static struct platform_device db1300_sd0_dev = {
+	.dev = {
+		.platform_data	= &db1300_sd0_platdata,
+	},
+	.name		= "au1xxx-mmc",
+	.id		= 0,
+	.resource	= au1300_sd0_res,
+	.num_resources	= ARRAY_SIZE(au1300_sd0_res),
+};
+
+/**********************************************************************/
+
+static struct platform_device db1300_wm9715_dev = {
+	.name		= "wm9712-codec",
+	.id		= 1,	/* ID of PSC for AC97 audio, see asoc glue! */
+};
+
+static struct platform_device db1300_ac97dma_dev = {
+	.name		= "au1xpsc-pcm",
+	.id		= 1,	/* PSC ID */
+};
+
+static struct platform_device db1300_i2sdma_dev = {
+	.name		= "au1xpsc-pcm",
+	.id		= 2,	/* PSC ID */
+};
+
+static struct platform_device db1300_sndac97_dev = {
+	.name		= "db1300-ac97",
+};
+
+static struct platform_device db1300_sndi2s_dev = {
+	.name		= "db1300-i2s",
+};
+
+/**********************************************************************/
+
+static int db1300fb_panel_index(void)
+{
+	return 9;	/* DB1300_800x480 */
+}
+
+static int db1300fb_panel_init(void)
+{
+	/* Apply power (Vee/Vdd logic is inverted on Panel DB1300_800x480) */
+	bcsr_mod(BCSR_BOARD, BCSR_BOARD_LCDVEE | BCSR_BOARD_LCDVDD,
+			     BCSR_BOARD_LCDBL);
+	return 0;
+}
+
+static int db1300fb_panel_shutdown(void)
+{
+	/* Remove power (Vee/Vdd logic is inverted on Panel DB1300_800x480) */
+	bcsr_mod(BCSR_BOARD, BCSR_BOARD_LCDBL,
+			     BCSR_BOARD_LCDVEE | BCSR_BOARD_LCDVDD);
+	return 0;
+}
+
+static struct au1200fb_platdata db1300fb_pd = {
+	.panel_index	= db1300fb_panel_index,
+	.panel_init	= db1300fb_panel_init,
+	.panel_shutdown	= db1300fb_panel_shutdown,
+};
+
+static struct resource au1300_lcd_res[] = {
+	[0] = {
+		.start	= AU1200_LCD_PHYS_ADDR,
+		.end	= AU1200_LCD_PHYS_ADDR + 0x800 - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= AU1300_LCD_INT,
+		.end	= AU1300_LCD_INT,
+		.flags	= IORESOURCE_IRQ,
+	}
+};
+
+static u64 au1300_lcd_dmamask = DMA_BIT_MASK(32);
+
+static struct platform_device db1300_lcd_dev = {
+	.name		= "au1200-lcd",
+	.id		= 0,
+	.dev = {
+		.dma_mask		= &au1300_lcd_dmamask,
+		.coherent_dma_mask	= DMA_BIT_MASK(32),
+		.platform_data		= &db1300fb_pd,
+	},
+	.num_resources	= ARRAY_SIZE(au1300_lcd_res),
+	.resource	= au1300_lcd_res,
+};
+
+/**********************************************************************/
+
+static struct platform_device *db1300_dev[] __initdata = {
+	&db1300_eth_dev,
+	&db1300_i2c_dev,
+	&db1300_5waysw_dev,
+	&db1300_nand_dev,
+	&db1300_ide_dev,
+	&db1300_sd0_dev,
+	&db1300_sd1_dev,
+	&db1300_lcd_dev,
+	&db1300_ac97_dev,
+	&db1300_i2s_dev,
+	&db1300_wm9715_dev,
+	&db1300_ac97dma_dev,
+	&db1300_i2sdma_dev,
+	&db1300_sndac97_dev,
+	&db1300_sndi2s_dev,
+};
+
+static int __init db1300_device_init(void)
+{
+	int swapped, cpldirq;
+
+	/* setup CPLD IRQ muxer */
+	cpldirq = au1300_gpio_to_irq(AU1300_PIN_EXTCLK1);
+	irq_set_irq_type(cpldirq, IRQ_TYPE_LEVEL_HIGH);
+	bcsr_init_irq(DB1300_FIRST_INT, DB1300_LAST_INT, cpldirq);
+
+	/* insert/eject IRQs: one always triggers so don't enable them
+	 * when doing request_irq() on them.  DB1200 has this bug too.
+	 */
+	irq_set_status_flags(DB1300_SD1_INSERT_INT, IRQ_NOAUTOEN);
+	irq_set_status_flags(DB1300_SD1_EJECT_INT, IRQ_NOAUTOEN);
+	irq_set_status_flags(DB1300_CF_INSERT_INT, IRQ_NOAUTOEN);
+	irq_set_status_flags(DB1300_CF_EJECT_INT, IRQ_NOAUTOEN);
+
+	/*
+	 * setup board
+	 */
+	prom_get_ethernet_addr(&db1300_eth_config.mac[0]);
+
+	i2c_register_board_info(0, db1300_i2c_devs,
+				ARRAY_SIZE(db1300_i2c_devs));
+
+	/* Audio PSC clock is supplied by codecs (PSC1, 2) */
+	__raw_writel(PSC_SEL_CLK_SERCLK,
+	    (void __iomem *)KSEG1ADDR(AU1300_PSC1_PHYS_ADDR) + PSC_SEL_OFFSET);
+	wmb();
+	__raw_writel(PSC_SEL_CLK_SERCLK,
+	    (void __iomem *)KSEG1ADDR(AU1300_PSC2_PHYS_ADDR) + PSC_SEL_OFFSET);
+	wmb();
+	/* I2C uses internal 48MHz EXTCLK1 */
+	__raw_writel(PSC_SEL_CLK_INTCLK,
+	    (void __iomem *)KSEG1ADDR(AU1300_PSC3_PHYS_ADDR) + PSC_SEL_OFFSET);
+	wmb();
+
+	/* enable power to USB ports */
+	bcsr_mod(BCSR_RESETS, 0, BCSR_RESETS_USBHPWR | BCSR_RESETS_OTGPWR);
+
+	/* although it is socket #0, it uses the CPLD bits which previous boards
+	 * have used for socket #1.
+	 */
+	db1x_register_pcmcia_socket(
+		AU1000_PCMCIA_ATTR_PHYS_ADDR,
+		AU1000_PCMCIA_ATTR_PHYS_ADDR + 0x00400000 - 1,
+		AU1000_PCMCIA_MEM_PHYS_ADDR,
+		AU1000_PCMCIA_MEM_PHYS_ADDR  + 0x00400000 - 1,
+		AU1000_PCMCIA_IO_PHYS_ADDR,
+		AU1000_PCMCIA_IO_PHYS_ADDR   + 0x00010000 - 1,
+		DB1300_CF_INT, DB1300_CF_INSERT_INT, 0, DB1300_CF_EJECT_INT, 1);
+
+	swapped = bcsr_read(BCSR_STATUS) & BCSR_STATUS_DB1200_SWAPBOOT;
+	db1x_register_norflash(64 << 20, 2, swapped);
+
+	return platform_add_devices(db1300_dev, ARRAY_SIZE(db1300_dev));
+}
+device_initcall(db1300_device_init);
+
+
+void __init board_setup(void)
+{
+	unsigned short whoami;
+
+	db1300_gpio_config();
+	bcsr_init(DB1300_BCSR_PHYS_ADDR,
+		  DB1300_BCSR_PHYS_ADDR + DB1300_BCSR_HEXLED_OFS);
+
+	whoami = bcsr_read(BCSR_WHOAMI);
+	printk(KERN_INFO "NetLogic DBAu1300 Development Platform.\n\t"
+		"BoardID %d   CPLD Rev %d   DaughtercardID %d\n",
+		BCSR_WHOAMI_BOARD(whoami), BCSR_WHOAMI_CPLD(whoami),
+		BCSR_WHOAMI_DCID(whoami));
+
+	/* enable UARTs, YAMON only enables #2 */
+	alchemy_uart_enable(AU1300_UART0_PHYS_ADDR);
+	alchemy_uart_enable(AU1300_UART1_PHYS_ADDR);
+	alchemy_uart_enable(AU1300_UART3_PHYS_ADDR);
+}

arch/mips/alchemy/devboards/db1550.c

@@ -0,0 +1,498 @@
+/*
+ * Alchemy Db1550 board support
+ *
+ * (c) 2011 Manuel Lauss <manuel.lauss@googlemail.com>
+ */
+
+#include <linux/dma-mapping.h>
+#include <linux/gpio.h>
+#include <linux/i2c.h>
+#include <linux/init.h>
+#include <linux/io.h>
+#include <linux/interrupt.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/nand.h>
+#include <linux/mtd/partitions.h>
+#include <linux/platform_device.h>
+#include <linux/pm.h>
+#include <linux/spi/spi.h>
+#include <linux/spi/flash.h>
+#include <asm/mach-au1x00/au1000.h>
+#include <asm/mach-au1x00/au1xxx_eth.h>
+#include <asm/mach-au1x00/au1xxx_dbdma.h>
+#include <asm/mach-au1x00/au1xxx_psc.h>
+#include <asm/mach-au1x00/au1550_spi.h>
+#include <asm/mach-db1x00/bcsr.h>
+#include <prom.h>
+#include "platform.h"
+
+
+const char *get_system_type(void)
+{
+	return "DB1550";
+}
+
+static void __init db1550_hw_setup(void)
+{
+	void __iomem *base;
+
+	alchemy_gpio_direction_output(203, 0);	/* red led on */
+
+	/* complete SPI setup: link psc0_intclk to a 48MHz source,
+	 * and assign GPIO16 to PSC0_SYNC1 (SPI cs# line)
+	 */
+	base = (void __iomem *)SYS_CLKSRC;
+	__raw_writel(__raw_readl(base) | 0x000001e0, base);
+	base = (void __iomem *)SYS_PINFUNC;
+	__raw_writel(__raw_readl(base) | 1, base);
+	wmb();
+
+	/* reset the AC97 codec now, the reset time in the psc-ac97 driver
+	 * is apparently too short although it's ridiculous as it is.
+	 */
+	base = (void __iomem *)KSEG1ADDR(AU1550_PSC1_PHYS_ADDR);
+	__raw_writel(PSC_SEL_CLK_SERCLK | PSC_SEL_PS_AC97MODE,
+		     base + PSC_SEL_OFFSET);
+	__raw_writel(PSC_CTRL_DISABLE, base + PSC_CTRL_OFFSET);
+	wmb();
+	__raw_writel(PSC_AC97RST_RST, base + PSC_AC97RST_OFFSET);
+	wmb();
+
+	alchemy_gpio_direction_output(202, 0);	/* green led on */
+}
+
+void __init board_setup(void)
+{
+	unsigned short whoami;
+
+	bcsr_init(DB1550_BCSR_PHYS_ADDR,
+		  DB1550_BCSR_PHYS_ADDR + DB1550_BCSR_HEXLED_OFS);
+
+	whoami = bcsr_read(BCSR_WHOAMI);
+	printk(KERN_INFO "Alchemy/AMD DB1550 Board, CPLD Rev %d"
+		"  Board-ID %d  Daughtercard ID %d\n",
+		(whoami >> 4) & 0xf, (whoami >> 8) & 0xf, whoami & 0xf);
+
+	db1550_hw_setup();
+}
+
+/*****************************************************************************/
+
+static struct mtd_partition db1550_spiflash_parts[] = {
+	{
+		.name	= "spi_flash",
+		.offset	= 0,
+		.size	= MTDPART_SIZ_FULL,
+	},
+};
+
+static struct flash_platform_data db1550_spiflash_data = {
+	.name		= "s25fl010",
+	.parts		= db1550_spiflash_parts,
+	.nr_parts	= ARRAY_SIZE(db1550_spiflash_parts),
+	.type		= "m25p10",
+};
+
+static struct spi_board_info db1550_spi_devs[] __initdata = {
+	{
+		/* TI TMP121AIDBVR temp sensor */
+		.modalias	= "tmp121",
+		.max_speed_hz	= 2400000,
+		.bus_num	= 0,
+		.chip_select	= 0,
+		.mode		= SPI_MODE_0,
+	},
+	{
+		/* Spansion S25FL001D0FMA SPI flash */
+		.modalias	= "m25p80",
+		.max_speed_hz	= 2400000,
+		.bus_num	= 0,
+		.chip_select	= 1,
+		.mode		= SPI_MODE_0,
+		.platform_data	= &db1550_spiflash_data,
+	},
+};
+
+static struct i2c_board_info db1550_i2c_devs[] __initdata = {
+	{ I2C_BOARD_INFO("24c04",  0x52),}, /* AT24C04-10 I2C eeprom */
+	{ I2C_BOARD_INFO("ne1619", 0x2d),}, /* adm1025-compat hwmon */
+	{ I2C_BOARD_INFO("wm8731", 0x1b),}, /* I2S audio codec WM8731 */
+};
+
+/**********************************************************************/
+
+static void au1550_nand_cmd_ctrl(struct mtd_info *mtd, int cmd,
+				 unsigned int ctrl)
+{
+	struct nand_chip *this = mtd->priv;
+	unsigned long ioaddr = (unsigned long)this->IO_ADDR_W;
+
+	ioaddr &= 0xffffff00;
+
+	if (ctrl & NAND_CLE) {
+		ioaddr += MEM_STNAND_CMD;
+	} else if (ctrl & NAND_ALE) {
+		ioaddr += MEM_STNAND_ADDR;
+	} else {
+		/* assume we want to r/w real data  by default */
+		ioaddr += MEM_STNAND_DATA;
+	}
+	this->IO_ADDR_R = this->IO_ADDR_W = (void __iomem *)ioaddr;
+	if (cmd != NAND_CMD_NONE) {
+		__raw_writeb(cmd, this->IO_ADDR_W);
+		wmb();
+	}
+}
+
+static int au1550_nand_device_ready(struct mtd_info *mtd)
+{
+	return __raw_readl((void __iomem *)MEM_STSTAT) & 1;
+}
+
+static const char *db1550_part_probes[] = { "cmdlinepart", NULL };
+
+static struct mtd_partition db1550_nand_parts[] = {
+	{
+		.name	= "NAND FS 0",
+		.offset	= 0,
+		.size	= 8 * 1024 * 1024,
+	},
+	{
+		.name	= "NAND FS 1",
+		.offset	= MTDPART_OFS_APPEND,
+		.size	= MTDPART_SIZ_FULL
+	},
+};
+
+struct platform_nand_data db1550_nand_platdata = {
+	.chip = {
+		.nr_chips	= 1,
+		.chip_offset	= 0,
+		.nr_partitions	= ARRAY_SIZE(db1550_nand_parts),
+		.partitions	= db1550_nand_parts,
+		.chip_delay	= 20,
+		.part_probe_types = db1550_part_probes,
+	},
+	.ctrl = {
+		.dev_ready	= au1550_nand_device_ready,
+		.cmd_ctrl	= au1550_nand_cmd_ctrl,
+	},
+};
+
+static struct resource db1550_nand_res[] = {
+	[0] = {
+		.start	= 0x20000000,
+		.end	= 0x200000ff,
+		.flags	= IORESOURCE_MEM,
+	},
+};
+
+static struct platform_device db1550_nand_dev = {
+	.name		= "gen_nand",
+	.num_resources	= ARRAY_SIZE(db1550_nand_res),
+	.resource	= db1550_nand_res,
+	.id		= -1,
+	.dev		= {
+		.platform_data = &db1550_nand_platdata,
+	}
+};
+
+/**********************************************************************/
+
+static struct resource au1550_psc0_res[] = {
+	[0] = {
+		.start	= AU1550_PSC0_PHYS_ADDR,
+		.end	= AU1550_PSC0_PHYS_ADDR + 0xfff,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= AU1550_PSC0_INT,
+		.end	= AU1550_PSC0_INT,
+		.flags	= IORESOURCE_IRQ,
+	},
+	[2] = {
+		.start	= AU1550_DSCR_CMD0_PSC0_TX,
+		.end	= AU1550_DSCR_CMD0_PSC0_TX,
+		.flags	= IORESOURCE_DMA,
+	},
+	[3] = {
+		.start	= AU1550_DSCR_CMD0_PSC0_RX,
+		.end	= AU1550_DSCR_CMD0_PSC0_RX,
+		.flags	= IORESOURCE_DMA,
+	},
+};
+
+static void db1550_spi_cs_en(struct au1550_spi_info *spi, int cs, int pol)
+{
+	if (cs)
+		bcsr_mod(BCSR_BOARD, 0, BCSR_BOARD_SPISEL);
+	else
+		bcsr_mod(BCSR_BOARD, BCSR_BOARD_SPISEL, 0);
+}
+
+static struct au1550_spi_info db1550_spi_platdata = {
+	.mainclk_hz	= 48000000,	/* PSC0 clock: max. 2.4MHz SPI clk */
+	.num_chipselect = 2,
+	.activate_cs	= db1550_spi_cs_en,
+};
+
+static u64 spi_dmamask = DMA_BIT_MASK(32);
+
+static struct platform_device db1550_spi_dev = {
+	.dev	= {
+		.dma_mask		= &spi_dmamask,
+		.coherent_dma_mask	= DMA_BIT_MASK(32),
+		.platform_data		= &db1550_spi_platdata,
+	},
+	.name		= "au1550-spi",
+	.id		= 0,	/* bus number */
+	.num_resources	= ARRAY_SIZE(au1550_psc0_res),
+	.resource	= au1550_psc0_res,
+};
+
+/**********************************************************************/
+
+static struct resource au1550_psc1_res[] = {
+	[0] = {
+		.start	= AU1550_PSC1_PHYS_ADDR,
+		.end	= AU1550_PSC1_PHYS_ADDR + 0xfff,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= AU1550_PSC1_INT,
+		.end	= AU1550_PSC1_INT,
+		.flags	= IORESOURCE_IRQ,
+	},
+	[2] = {
+		.start	= AU1550_DSCR_CMD0_PSC1_TX,
+		.end	= AU1550_DSCR_CMD0_PSC1_TX,
+		.flags	= IORESOURCE_DMA,
+	},
+	[3] = {
+		.start	= AU1550_DSCR_CMD0_PSC1_RX,
+		.end	= AU1550_DSCR_CMD0_PSC1_RX,
+		.flags	= IORESOURCE_DMA,
+	},
+};
+
+static struct platform_device db1550_ac97_dev = {
+	.name		= "au1xpsc_ac97",
+	.id		= 1,	/* PSC ID */
+	.num_resources	= ARRAY_SIZE(au1550_psc1_res),
+	.resource	= au1550_psc1_res,
+};
+
+
+static struct resource au1550_psc2_res[] = {
+	[0] = {
+		.start	= AU1550_PSC2_PHYS_ADDR,
+		.end	= AU1550_PSC2_PHYS_ADDR + 0xfff,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= AU1550_PSC2_INT,
+		.end	= AU1550_PSC2_INT,
+		.flags	= IORESOURCE_IRQ,
+	},
+	[2] = {
+		.start	= AU1550_DSCR_CMD0_PSC2_TX,
+		.end	= AU1550_DSCR_CMD0_PSC2_TX,
+		.flags	= IORESOURCE_DMA,
+	},
+	[3] = {
+		.start	= AU1550_DSCR_CMD0_PSC2_RX,
+		.end	= AU1550_DSCR_CMD0_PSC2_RX,
+		.flags	= IORESOURCE_DMA,
+	},
+};
+
+static struct platform_device db1550_i2c_dev = {
+	.name		= "au1xpsc_smbus",
+	.id		= 0,	/* bus number */
+	.num_resources	= ARRAY_SIZE(au1550_psc2_res),
+	.resource	= au1550_psc2_res,
+};
+
+/**********************************************************************/
+
+static struct resource au1550_psc3_res[] = {
+	[0] = {
+		.start	= AU1550_PSC3_PHYS_ADDR,
+		.end	= AU1550_PSC3_PHYS_ADDR + 0xfff,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= AU1550_PSC3_INT,
+		.end	= AU1550_PSC3_INT,
+		.flags	= IORESOURCE_IRQ,
+	},
+	[2] = {
+		.start	= AU1550_DSCR_CMD0_PSC3_TX,
+		.end	= AU1550_DSCR_CMD0_PSC3_TX,
+		.flags	= IORESOURCE_DMA,
+	},
+	[3] = {
+		.start	= AU1550_DSCR_CMD0_PSC3_RX,
+		.end	= AU1550_DSCR_CMD0_PSC3_RX,
+		.flags	= IORESOURCE_DMA,
+	},
+};
+
+static struct platform_device db1550_i2s_dev = {
+	.name		= "au1xpsc_i2s",
+	.id		= 3,	/* PSC ID */
+	.num_resources	= ARRAY_SIZE(au1550_psc3_res),
+	.resource	= au1550_psc3_res,
+};
+
+/**********************************************************************/
+
+static struct platform_device db1550_stac_dev = {
+	.name		= "ac97-codec",
+	.id		= 1,	/* on PSC1 */
+};
+
+static struct platform_device db1550_ac97dma_dev = {
+	.name		= "au1xpsc-pcm",
+	.id		= 1,	/* on PSC3 */
+};
+
+static struct platform_device db1550_i2sdma_dev = {
+	.name		= "au1xpsc-pcm",
+	.id		= 3,	/* on PSC3 */
+};
+
+static struct platform_device db1550_sndac97_dev = {
+	.name		= "db1550-ac97",
+};
+
+static struct platform_device db1550_sndi2s_dev = {
+	.name		= "db1550-i2s",
+};
+
+/**********************************************************************/
+
+static int db1550_map_pci_irq(const struct pci_dev *d, u8 slot, u8 pin)
+{
+	if ((slot < 11) || (slot > 13) || pin == 0)
+		return -1;
+	if (slot == 11)
+		return (pin == 1) ? AU1550_PCI_INTC : 0xff;
+	if (slot == 12) {
+		switch (pin) {
+		case 1: return AU1550_PCI_INTB;
+		case 2: return AU1550_PCI_INTC;
+		case 3: return AU1550_PCI_INTD;
+		case 4: return AU1550_PCI_INTA;
+		}
+	}
+	if (slot == 13) {
+		switch (pin) {
+		case 1: return AU1550_PCI_INTA;
+		case 2: return AU1550_PCI_INTB;
+		case 3: return AU1550_PCI_INTC;
+		case 4: return AU1550_PCI_INTD;
+		}
+	}
+	return -1;
+}
+
+static struct resource alchemy_pci_host_res[] = {
+	[0] = {
+		.start	= AU1500_PCI_PHYS_ADDR,
+		.end	= AU1500_PCI_PHYS_ADDR + 0xfff,
+		.flags	= IORESOURCE_MEM,
+	},
+};
+
+static struct alchemy_pci_platdata db1550_pci_pd = {
+	.board_map_irq	= db1550_map_pci_irq,
+};
+
+static struct platform_device db1550_pci_host_dev = {
+	.dev.platform_data = &db1550_pci_pd,
+	.name		= "alchemy-pci",
+	.id		= 0,
+	.num_resources	= ARRAY_SIZE(alchemy_pci_host_res),
+	.resource	= alchemy_pci_host_res,
+};
+
+/**********************************************************************/
+
+static struct platform_device *db1550_devs[] __initdata = {
+	&db1550_nand_dev,
+	&db1550_i2c_dev,
+	&db1550_ac97_dev,
+	&db1550_spi_dev,
+	&db1550_i2s_dev,
+	&db1550_stac_dev,
+	&db1550_ac97dma_dev,
+	&db1550_i2sdma_dev,
+	&db1550_sndac97_dev,
+	&db1550_sndi2s_dev,
+};
+
+/* must be arch_initcall; MIPS PCI scans busses in a subsys_initcall */
+static int __init db1550_pci_init(void)
+{
+	return platform_device_register(&db1550_pci_host_dev);
+}
+arch_initcall(db1550_pci_init);
+
+static int __init db1550_dev_init(void)
+{
+	int swapped;
+
+	irq_set_irq_type(AU1550_GPIO0_INT, IRQ_TYPE_EDGE_BOTH);  /* CD0# */
+	irq_set_irq_type(AU1550_GPIO1_INT, IRQ_TYPE_EDGE_BOTH);  /* CD1# */
+	irq_set_irq_type(AU1550_GPIO3_INT, IRQ_TYPE_LEVEL_LOW);  /* CARD0# */
+	irq_set_irq_type(AU1550_GPIO5_INT, IRQ_TYPE_LEVEL_LOW);  /* CARD1# */
+	irq_set_irq_type(AU1550_GPIO21_INT, IRQ_TYPE_LEVEL_LOW); /* STSCHG0# */
+	irq_set_irq_type(AU1550_GPIO22_INT, IRQ_TYPE_LEVEL_LOW); /* STSCHG1# */
+
+	i2c_register_board_info(0, db1550_i2c_devs,
+				ARRAY_SIZE(db1550_i2c_devs));
+	spi_register_board_info(db1550_spi_devs,
+				ARRAY_SIZE(db1550_i2c_devs));
+
+	/* Audio PSC clock is supplied by codecs (PSC1, 3) FIXME: platdata!! */
+	__raw_writel(PSC_SEL_CLK_SERCLK,
+	    (void __iomem *)KSEG1ADDR(AU1550_PSC1_PHYS_ADDR) + PSC_SEL_OFFSET);
+	wmb();
+	__raw_writel(PSC_SEL_CLK_SERCLK,
+	    (void __iomem *)KSEG1ADDR(AU1550_PSC3_PHYS_ADDR) + PSC_SEL_OFFSET);
+	wmb();
+	/* SPI/I2C use internally supplied 50MHz source */
+	__raw_writel(PSC_SEL_CLK_INTCLK,
+	    (void __iomem *)KSEG1ADDR(AU1550_PSC0_PHYS_ADDR) + PSC_SEL_OFFSET);
+	wmb();
+	__raw_writel(PSC_SEL_CLK_INTCLK,
+	    (void __iomem *)KSEG1ADDR(AU1550_PSC2_PHYS_ADDR) + PSC_SEL_OFFSET);
+	wmb();
+
+	db1x_register_pcmcia_socket(
+		AU1000_PCMCIA_ATTR_PHYS_ADDR,
+		AU1000_PCMCIA_ATTR_PHYS_ADDR + 0x000400000 - 1,
+		AU1000_PCMCIA_MEM_PHYS_ADDR,
+		AU1000_PCMCIA_MEM_PHYS_ADDR  + 0x000400000 - 1,
+		AU1000_PCMCIA_IO_PHYS_ADDR,
+		AU1000_PCMCIA_IO_PHYS_ADDR   + 0x000010000 - 1,
+		AU1550_GPIO3_INT, AU1550_GPIO0_INT,
+		/*AU1550_GPIO21_INT*/0, 0, 0);
+
+	db1x_register_pcmcia_socket(
+		AU1000_PCMCIA_ATTR_PHYS_ADDR + 0x004000000,
+		AU1000_PCMCIA_ATTR_PHYS_ADDR + 0x004400000 - 1,
+		AU1000_PCMCIA_MEM_PHYS_ADDR  + 0x004000000,
+		AU1000_PCMCIA_MEM_PHYS_ADDR  + 0x004400000 - 1,
+		AU1000_PCMCIA_IO_PHYS_ADDR   + 0x004000000,
+		AU1000_PCMCIA_IO_PHYS_ADDR   + 0x004010000 - 1,
+		AU1550_GPIO5_INT, AU1550_GPIO1_INT,
+		/*AU1550_GPIO22_INT*/0, 0, 1);
+
+	swapped = bcsr_read(BCSR_STATUS) & BCSR_STATUS_DB1000_SWAPBOOT;
+	db1x_register_norflash(128 << 20, 4, swapped);
+
+	return platform_add_devices(db1550_devs, ARRAY_SIZE(db1550_devs));
+}
+device_initcall(db1550_dev_init);

arch/mips/alchemy/devboards/db1x00/Makefile

@@ -1,8 +0,0 @@
-#
-#  Copyright 2000, 2008 MontaVista Software Inc.
-#  Author: MontaVista Software, Inc. <source@mvista.com>
-#
-# Makefile for the Alchemy Semiconductor DBAu1xx0 boards.
-#
-
-obj-y := board_setup.o platform.o

arch/mips/alchemy/devboards/db1x00/board_setup.c

@@ -1,229 +0,0 @@
-/*
- *
- * BRIEF MODULE DESCRIPTION
- *	Alchemy Db1x00 board setup.
- *
- * Copyright 2000, 2008 MontaVista Software Inc.
- * Author: MontaVista Software, Inc. <source@mvista.com>
- *
- *  This program is free software; you can redistribute  it and/or modify it
- *  under  the terms of  the GNU General  Public License as published by the
- *  Free Software Foundation;  either version 2 of the  License, or (at your
- *  option) any later version.
- *
- *  THIS  SOFTWARE  IS PROVIDED   ``AS  IS'' AND   ANY  EXPRESS OR IMPLIED
- *  WARRANTIES,   INCLUDING, BUT NOT  LIMITED  TO, THE IMPLIED WARRANTIES OF
- *  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN
- *  NO  EVENT  SHALL   THE AUTHOR  BE    LIABLE FOR ANY   DIRECT, INDIRECT,
- *  INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- *  NOT LIMITED   TO, PROCUREMENT OF  SUBSTITUTE GOODS  OR SERVICES; LOSS OF
- *  USE, DATA,  OR PROFITS; OR  BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
- *  ANY THEORY OF LIABILITY, WHETHER IN  CONTRACT, STRICT LIABILITY, OR TORT
- *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
- *  THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- *  You should have received a copy of the  GNU General Public License along
- *  with this program; if not, write  to the Free Software Foundation, Inc.,
- *  675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#include <linux/gpio.h>
-#include <linux/init.h>
-#include <linux/interrupt.h>
-#include <linux/pm.h>
-
-#include <asm/mach-au1x00/au1000.h>
-#include <asm/mach-au1x00/au1xxx_eth.h>
-#include <asm/mach-db1x00/db1x00.h>
-#include <asm/mach-db1x00/bcsr.h>
-#include <asm/reboot.h>
-
-#include <prom.h>
-
-#ifdef CONFIG_MIPS_BOSPORUS
-char irq_tab_alchemy[][5] __initdata = {
-	[11] = { -1, AU1500_PCI_INTA, AU1500_PCI_INTB, 0xff, 0xff }, /* IDSEL 11 - miniPCI  */
-	[12] = { -1, AU1500_PCI_INTA, 0xff, 0xff, 0xff }, /* IDSEL 12 - SN1741   */
-	[13] = { -1, AU1500_PCI_INTA, AU1500_PCI_INTB, AU1500_PCI_INTC, AU1500_PCI_INTD }, /* IDSEL 13 - PCI slot */
-};
-
-/*
- * Micrel/Kendin 5 port switch attached to MAC0,
- * MAC0 is associated with PHY address 5 (== WAN port)
- * MAC1 is not associated with any PHY, since it's connected directly
- * to the switch.
- * no interrupts are used
- */
-static struct au1000_eth_platform_data eth0_pdata = {
-	.phy_static_config	= 1,
-	.phy_addr		= 5,
-};
-
-static void bosporus_power_off(void)
-{
-	while (1)
-		asm volatile (".set mips3 ; wait ; .set mips0");
-}
-
-const char *get_system_type(void)
-{
-	return "Alchemy Bosporus Gateway Reference";
-}
-#endif
-
-
-#ifdef CONFIG_MIPS_MIRAGE
-static void mirage_power_off(void)
-{
-	alchemy_gpio_direction_output(210, 1);
-}
-
-const char *get_system_type(void)
-{
-	return "Alchemy Mirage";
-}
-#endif
-
-
-#if defined(CONFIG_MIPS_BOSPORUS) || defined(CONFIG_MIPS_MIRAGE)
-static void mips_softreset(void)
-{
-	asm volatile ("jr\t%0" : : "r"(0xbfc00000));
-}
-
-#else
-
-const char *get_system_type(void)
-{
-	return "Alchemy Db1x00";
-}
-#endif
-
-
-void __init board_setup(void)
-{
-	unsigned long bcsr1, bcsr2;
-
-	bcsr1 = DB1000_BCSR_PHYS_ADDR;
-	bcsr2 = DB1000_BCSR_PHYS_ADDR + DB1000_BCSR_HEXLED_OFS;
-
-#ifdef CONFIG_MIPS_DB1000
-	printk(KERN_INFO "AMD Alchemy Au1000/Db1000 Board\n");
-#endif
-#ifdef CONFIG_MIPS_DB1500
-	printk(KERN_INFO "AMD Alchemy Au1500/Db1500 Board\n");
-#endif
-#ifdef CONFIG_MIPS_DB1100
-	printk(KERN_INFO "AMD Alchemy Au1100/Db1100 Board\n");
-#endif
-#ifdef CONFIG_MIPS_BOSPORUS
-	au1xxx_override_eth_cfg(0, &eth0_pdata);
-
-	printk(KERN_INFO "AMD Alchemy Bosporus Board\n");
-#endif
-#ifdef CONFIG_MIPS_MIRAGE
-	printk(KERN_INFO "AMD Alchemy Mirage Board\n");
-#endif
-#ifdef CONFIG_MIPS_DB1550
-	printk(KERN_INFO "AMD Alchemy Au1550/Db1550 Board\n");
-
-	bcsr1 = DB1550_BCSR_PHYS_ADDR;
-	bcsr2 = DB1550_BCSR_PHYS_ADDR + DB1550_BCSR_HEXLED_OFS;
-#endif
-
-	/* initialize board register space */
-	bcsr_init(bcsr1, bcsr2);
-
-#if defined(CONFIG_IRDA) && defined(CONFIG_AU1000_FIR)
-	{
-		u32 pin_func;
-
-		/* Set IRFIRSEL instead of GPIO15 */
-		pin_func = au_readl(SYS_PINFUNC) | SYS_PF_IRF;
-		au_writel(pin_func, SYS_PINFUNC);
-		/* Power off until the driver is in use */
-		bcsr_mod(BCSR_RESETS, BCSR_RESETS_IRDA_MODE_MASK,
-			 BCSR_RESETS_IRDA_MODE_OFF);
-	}
-#endif
-	bcsr_write(BCSR_PCMCIA, 0);	/* turn off PCMCIA power */
-
-	/* Enable GPIO[31:0] inputs */
-	alchemy_gpio1_input_enable();
-
-#ifdef CONFIG_MIPS_MIRAGE
-	{
-		u32 pin_func;
-
-		/* GPIO[20] is output */
-		alchemy_gpio_direction_output(20, 0);
-
-		/* Set GPIO[210:208] instead of SSI_0 */
-		pin_func = au_readl(SYS_PINFUNC) | SYS_PF_S0;
-
-		/* Set GPIO[215:211] for LEDs */
-		pin_func |= 5 << 2;
-
-		/* Set GPIO[214:213] for more LEDs */
-		pin_func |= 5 << 12;
-
-		/* Set GPIO[207:200] instead of PCMCIA/LCD */
-		pin_func |= SYS_PF_LCD | SYS_PF_PC;
-		au_writel(pin_func, SYS_PINFUNC);
-
-		/*
-		 * Enable speaker amplifier.  This should
-		 * be part of the audio driver.
-		 */
-		alchemy_gpio_direction_output(209, 1);
-
-		pm_power_off = mirage_power_off;
-		_machine_halt = mirage_power_off;
-		_machine_restart = (void(*)(char *))mips_softreset;
-	}
-#endif
-
-#ifdef CONFIG_MIPS_BOSPORUS
-	pm_power_off = bosporus_power_off;
-	_machine_halt = bosporus_power_off;
-	_machine_restart = (void(*)(char *))mips_softreset;
-#endif
-	au_sync();
-}
-
-static int __init db1x00_init_irq(void)
-{
-#if defined(CONFIG_MIPS_MIRAGE)
-	irq_set_irq_type(AU1500_GPIO7_INT, IRQF_TRIGGER_RISING); /* TS pendown */
-#elif defined(CONFIG_MIPS_DB1550)
-	irq_set_irq_type(AU1550_GPIO0_INT, IRQF_TRIGGER_LOW);  /* CD0# */
-	irq_set_irq_type(AU1550_GPIO1_INT, IRQF_TRIGGER_LOW);  /* CD1# */
-	irq_set_irq_type(AU1550_GPIO3_INT, IRQF_TRIGGER_LOW);  /* CARD0# */
-	irq_set_irq_type(AU1550_GPIO5_INT, IRQF_TRIGGER_LOW);  /* CARD1# */
-	irq_set_irq_type(AU1550_GPIO21_INT, IRQF_TRIGGER_LOW); /* STSCHG0# */
-	irq_set_irq_type(AU1550_GPIO22_INT, IRQF_TRIGGER_LOW); /* STSCHG1# */
-#elif defined(CONFIG_MIPS_DB1500)
-	irq_set_irq_type(AU1500_GPIO0_INT, IRQF_TRIGGER_LOW); /* CD0# */
-	irq_set_irq_type(AU1500_GPIO3_INT, IRQF_TRIGGER_LOW); /* CD1# */
-	irq_set_irq_type(AU1500_GPIO2_INT, IRQF_TRIGGER_LOW); /* CARD0# */
-	irq_set_irq_type(AU1500_GPIO5_INT, IRQF_TRIGGER_LOW); /* CARD1# */
-	irq_set_irq_type(AU1500_GPIO1_INT, IRQF_TRIGGER_LOW); /* STSCHG0# */
-	irq_set_irq_type(AU1500_GPIO4_INT, IRQF_TRIGGER_LOW); /* STSCHG1# */
-#elif defined(CONFIG_MIPS_DB1100)
-	irq_set_irq_type(AU1100_GPIO0_INT, IRQF_TRIGGER_LOW); /* CD0# */
-	irq_set_irq_type(AU1100_GPIO3_INT, IRQF_TRIGGER_LOW); /* CD1# */
-	irq_set_irq_type(AU1100_GPIO2_INT, IRQF_TRIGGER_LOW); /* CARD0# */
-	irq_set_irq_type(AU1100_GPIO5_INT, IRQF_TRIGGER_LOW); /* CARD1# */
-	irq_set_irq_type(AU1100_GPIO1_INT, IRQF_TRIGGER_LOW); /* STSCHG0# */
-	irq_set_irq_type(AU1100_GPIO4_INT, IRQF_TRIGGER_LOW); /* STSCHG1# */
-#elif defined(CONFIG_MIPS_DB1000)
-	irq_set_irq_type(AU1000_GPIO0_INT, IRQF_TRIGGER_LOW); /* CD0# */
-	irq_set_irq_type(AU1000_GPIO3_INT, IRQF_TRIGGER_LOW); /* CD1# */
-	irq_set_irq_type(AU1000_GPIO2_INT, IRQF_TRIGGER_LOW); /* CARD0# */
-	irq_set_irq_type(AU1000_GPIO5_INT, IRQF_TRIGGER_LOW); /* CARD1# */
-	irq_set_irq_type(AU1000_GPIO1_INT, IRQF_TRIGGER_LOW); /* STSCHG0# */
-	irq_set_irq_type(AU1000_GPIO4_INT, IRQF_TRIGGER_LOW); /* STSCHG1# */
-#endif
-	return 0;
-}
-arch_initcall(db1x00_init_irq);

arch/mips/alchemy/devboards/db1x00/platform.c

@@ -1,316 +0,0 @@
-/*
- * DBAu1xxx board platform device registration
- *
- * Copyright (C) 2009 Manuel Lauss
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
- */
-
-#include <linux/init.h>
-#include <linux/interrupt.h>
-#include <linux/dma-mapping.h>
-#include <linux/platform_device.h>
-
-#include <asm/mach-au1x00/au1000.h>
-#include <asm/mach-au1x00/au1000_dma.h>
-#include <asm/mach-db1x00/bcsr.h>
-#include "../platform.h"
-
-struct pci_dev;
-
-/* DB1xxx PCMCIA interrupt sources:
- * CD0/1 	GPIO0/3
- * STSCHG0/1	GPIO1/4
- * CARD0/1	GPIO2/5
- * Db1550:	0/1, 21/22, 3/5
- */
-
-#define DB1XXX_HAS_PCMCIA
-#define F_SWAPPED (bcsr_read(BCSR_STATUS) & BCSR_STATUS_DB1000_SWAPBOOT)
-
-#if defined(CONFIG_MIPS_DB1000)
-#define DB1XXX_PCMCIA_CD0	AU1000_GPIO0_INT
-#define DB1XXX_PCMCIA_STSCHG0	AU1000_GPIO1_INT
-#define DB1XXX_PCMCIA_CARD0	AU1000_GPIO2_INT
-#define DB1XXX_PCMCIA_CD1	AU1000_GPIO3_INT
-#define DB1XXX_PCMCIA_STSCHG1	AU1000_GPIO4_INT
-#define DB1XXX_PCMCIA_CARD1	AU1000_GPIO5_INT
-#define BOARD_FLASH_SIZE	0x02000000 /* 32MB */
-#define BOARD_FLASH_WIDTH	4 /* 32-bits */
-#elif defined(CONFIG_MIPS_DB1100)
-#define DB1XXX_PCMCIA_CD0	AU1100_GPIO0_INT
-#define DB1XXX_PCMCIA_STSCHG0	AU1100_GPIO1_INT
-#define DB1XXX_PCMCIA_CARD0	AU1100_GPIO2_INT
-#define DB1XXX_PCMCIA_CD1	AU1100_GPIO3_INT
-#define DB1XXX_PCMCIA_STSCHG1	AU1100_GPIO4_INT
-#define DB1XXX_PCMCIA_CARD1	AU1100_GPIO5_INT
-#define BOARD_FLASH_SIZE	0x02000000 /* 32MB */
-#define BOARD_FLASH_WIDTH	4 /* 32-bits */
-#elif defined(CONFIG_MIPS_DB1500)
-#define DB1XXX_PCMCIA_CD0	AU1500_GPIO0_INT
-#define DB1XXX_PCMCIA_STSCHG0	AU1500_GPIO1_INT
-#define DB1XXX_PCMCIA_CARD0	AU1500_GPIO2_INT
-#define DB1XXX_PCMCIA_CD1	AU1500_GPIO3_INT
-#define DB1XXX_PCMCIA_STSCHG1	AU1500_GPIO4_INT
-#define DB1XXX_PCMCIA_CARD1	AU1500_GPIO5_INT
-#define BOARD_FLASH_SIZE	0x02000000 /* 32MB */
-#define BOARD_FLASH_WIDTH	4 /* 32-bits */
-#elif defined(CONFIG_MIPS_DB1550)
-#define DB1XXX_PCMCIA_CD0	AU1550_GPIO0_INT
-#define DB1XXX_PCMCIA_STSCHG0	AU1550_GPIO21_INT
-#define DB1XXX_PCMCIA_CARD0	AU1550_GPIO3_INT
-#define DB1XXX_PCMCIA_CD1	AU1550_GPIO1_INT
-#define DB1XXX_PCMCIA_STSCHG1	AU1550_GPIO22_INT
-#define DB1XXX_PCMCIA_CARD1	AU1550_GPIO5_INT
-#define BOARD_FLASH_SIZE	0x08000000 /* 128MB */
-#define BOARD_FLASH_WIDTH	4 /* 32-bits */
-#else
-/* other board: no PCMCIA */
-#undef DB1XXX_HAS_PCMCIA
-#undef F_SWAPPED
-#define F_SWAPPED 0
-#if defined(CONFIG_MIPS_BOSPORUS)
-#define BOARD_FLASH_SIZE	0x01000000 /* 16MB */
-#define BOARD_FLASH_WIDTH	2 /* 16-bits */
-#elif defined(CONFIG_MIPS_MIRAGE)
-#define BOARD_FLASH_SIZE	0x04000000 /* 64MB */
-#define BOARD_FLASH_WIDTH	4 /* 32-bits */
-#endif
-#endif
-
-#ifdef CONFIG_PCI
-#ifdef CONFIG_MIPS_DB1500
-static int db1xxx_map_pci_irq(const struct pci_dev *d, u8 slot, u8 pin)
-{
-	if ((slot < 12) || (slot > 13) || pin == 0)
-		return -1;
-	if (slot == 12)
-		return (pin == 1) ? AU1500_PCI_INTA : 0xff;
-	if (slot == 13) {
-		switch (pin) {
-		case 1: return AU1500_PCI_INTA;
-		case 2: return AU1500_PCI_INTB;
-		case 3: return AU1500_PCI_INTC;
-		case 4: return AU1500_PCI_INTD;
-		}
-	}
-	return -1;
-}
-#endif
-
-#ifdef CONFIG_MIPS_DB1550
-static int db1xxx_map_pci_irq(const struct pci_dev *d, u8 slot, u8 pin)
-{
-	if ((slot < 11) || (slot > 13) || pin == 0)
-		return -1;
-	if (slot == 11)
-		return (pin == 1) ? AU1550_PCI_INTC : 0xff;
-	if (slot == 12) {
-		switch (pin) {
-		case 1: return AU1550_PCI_INTB;
-		case 2: return AU1550_PCI_INTC;
-		case 3: return AU1550_PCI_INTD;
-		case 4: return AU1550_PCI_INTA;
-		}
-	}
-	if (slot == 13) {
-		switch (pin) {
-		case 1: return AU1550_PCI_INTA;
-		case 2: return AU1550_PCI_INTB;
-		case 3: return AU1550_PCI_INTC;
-		case 4: return AU1550_PCI_INTD;
-		}
-	}
-	return -1;
-}
-#endif
-
-#ifdef CONFIG_MIPS_BOSPORUS
-static int db1xxx_map_pci_irq(const struct pci_dev *d, u8 slot, u8 pin)
-{
-	if ((slot < 11) || (slot > 13) || pin == 0)
-		return -1;
-	if (slot == 12)
-		return (pin == 1) ? AU1500_PCI_INTA : 0xff;
-	if (slot == 11) {
-		switch (pin) {
-		case 1: return AU1500_PCI_INTA;
-		case 2: return AU1500_PCI_INTB;
-		default: return 0xff;
-		}
-	}
-	if (slot == 13) {
-		switch (pin) {
-		case 1: return AU1500_PCI_INTA;
-		case 2: return AU1500_PCI_INTB;
-		case 3: return AU1500_PCI_INTC;
-		case 4: return AU1500_PCI_INTD;
-		}
-	}
-	return -1;
-}
-#endif
-
-#ifdef CONFIG_MIPS_MIRAGE
-static int db1xxx_map_pci_irq(const struct pci_dev *d, u8 slot, u8 pin)
-{
-	if ((slot < 11) || (slot > 13) || pin == 0)
-		return -1;
-	if (slot == 11)
-		return (pin == 1) ? AU1500_PCI_INTD : 0xff;
-	if (slot == 12)
-		return (pin == 3) ? AU1500_PCI_INTC : 0xff;
-	if (slot == 13) {
-		switch (pin) {
-		case 1: return AU1500_PCI_INTA;
-		case 2: return AU1500_PCI_INTB;
-		default: return 0xff;
-		}
-	}
-	return -1;
-}
-#endif
-
-static struct resource alchemy_pci_host_res[] = {
-	[0] = {
-		.start	= AU1500_PCI_PHYS_ADDR,
-		.end	= AU1500_PCI_PHYS_ADDR + 0xfff,
-		.flags	= IORESOURCE_MEM,
-	},
-};
-
-static struct alchemy_pci_platdata db1xxx_pci_pd = {
-	.board_map_irq	= db1xxx_map_pci_irq,
-};
-
-static struct platform_device db1xxx_pci_host_dev = {
-	.dev.platform_data = &db1xxx_pci_pd,
-	.name		= "alchemy-pci",
-	.id		= 0,
-	.num_resources	= ARRAY_SIZE(alchemy_pci_host_res),
-	.resource	= alchemy_pci_host_res,
-};
-
-static int __init db15x0_pci_init(void)
-{
-	return platform_device_register(&db1xxx_pci_host_dev);
-}
-/* must be arch_initcall; MIPS PCI scans busses in a subsys_initcall */
-arch_initcall(db15x0_pci_init);
-#endif
-
-#ifdef CONFIG_MIPS_DB1100
-static struct resource au1100_lcd_resources[] = {
-	[0] = {
-		.start	= AU1100_LCD_PHYS_ADDR,
-		.end	= AU1100_LCD_PHYS_ADDR + 0x800 - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= AU1100_LCD_INT,
-		.end	= AU1100_LCD_INT,
-		.flags	= IORESOURCE_IRQ,
-	}
-};
-
-static u64 au1100_lcd_dmamask = DMA_BIT_MASK(32);
-
-static struct platform_device au1100_lcd_device = {
-	.name		= "au1100-lcd",
-	.id		= 0,
-	.dev = {
-		.dma_mask		= &au1100_lcd_dmamask,
-		.coherent_dma_mask	= DMA_BIT_MASK(32),
-	},
-	.num_resources	= ARRAY_SIZE(au1100_lcd_resources),
-	.resource	= au1100_lcd_resources,
-};
-#endif
-
-static struct resource alchemy_ac97c_res[] = {
-	[0] = {
-		.start	= AU1000_AC97_PHYS_ADDR,
-		.end	= AU1000_AC97_PHYS_ADDR + 0xfff,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= DMA_ID_AC97C_TX,
-		.end	= DMA_ID_AC97C_TX,
-		.flags	= IORESOURCE_DMA,
-	},
-	[2] = {
-		.start	= DMA_ID_AC97C_RX,
-		.end	= DMA_ID_AC97C_RX,
-		.flags	= IORESOURCE_DMA,
-	},
-};
-
-static struct platform_device alchemy_ac97c_dev = {
-	.name		= "alchemy-ac97c",
-	.id		= -1,
-	.resource	= alchemy_ac97c_res,
-	.num_resources	= ARRAY_SIZE(alchemy_ac97c_res),
-};
-
-static struct platform_device alchemy_ac97c_dma_dev = {
-	.name		= "alchemy-pcm-dma",
-	.id		= 0,
-};
-
-static struct platform_device db1x00_codec_dev = {
-	.name		= "ac97-codec",
-	.id		= -1,
-};
-
-static struct platform_device db1x00_audio_dev = {
-	.name		= "db1000-audio",
-};
-
-static int __init db1xxx_dev_init(void)
-{
-#ifdef DB1XXX_HAS_PCMCIA
-	db1x_register_pcmcia_socket(
-		AU1000_PCMCIA_ATTR_PHYS_ADDR,
-		AU1000_PCMCIA_ATTR_PHYS_ADDR + 0x000400000 - 1,
-		AU1000_PCMCIA_MEM_PHYS_ADDR,
-		AU1000_PCMCIA_MEM_PHYS_ADDR  + 0x000400000 - 1,
-		AU1000_PCMCIA_IO_PHYS_ADDR,
-		AU1000_PCMCIA_IO_PHYS_ADDR   + 0x000010000 - 1,
-		DB1XXX_PCMCIA_CARD0, DB1XXX_PCMCIA_CD0,
-		/*DB1XXX_PCMCIA_STSCHG0*/0, 0, 0);
-
-	db1x_register_pcmcia_socket(
-		AU1000_PCMCIA_ATTR_PHYS_ADDR + 0x004000000,
-		AU1000_PCMCIA_ATTR_PHYS_ADDR + 0x004400000 - 1,
-		AU1000_PCMCIA_MEM_PHYS_ADDR  + 0x004000000,
-		AU1000_PCMCIA_MEM_PHYS_ADDR  + 0x004400000 - 1,
-		AU1000_PCMCIA_IO_PHYS_ADDR   + 0x004000000,
-		AU1000_PCMCIA_IO_PHYS_ADDR   + 0x004010000 - 1,
-		DB1XXX_PCMCIA_CARD1, DB1XXX_PCMCIA_CD1,
-		/*DB1XXX_PCMCIA_STSCHG1*/0, 0, 1);
-#endif
-#ifdef CONFIG_MIPS_DB1100
-	platform_device_register(&au1100_lcd_device);
-#endif
-	db1x_register_norflash(BOARD_FLASH_SIZE, BOARD_FLASH_WIDTH, F_SWAPPED);
-
-	platform_device_register(&db1x00_codec_dev);
-	platform_device_register(&alchemy_ac97c_dma_dev);
-	platform_device_register(&alchemy_ac97c_dev);
-	platform_device_register(&db1x00_audio_dev);
-
-	return 0;
-}
-device_initcall(db1xxx_dev_init);

arch/mips/alchemy/devboards/pb1000/Makefile

@@ -1,8 +0,0 @@
-#
-#  Copyright 2000, 2008 MontaVista Software Inc.
-#  Author: MontaVista Software, Inc. <source@mvista.com>
-#
-# Makefile for the Alchemy Semiconductor Pb1000 board.
-#
-
-obj-y := board_setup.o

arch/mips/alchemy/devboards/pb1000/board_setup.c

@@ -1,209 +0,0 @@
-/*
- * Copyright 2000, 2008 MontaVista Software Inc.
- * Author: MontaVista Software, Inc. <source@mvista.com>
- *
- *  This program is free software; you can redistribute  it and/or modify it
- *  under  the terms of  the GNU General  Public License as published by the
- *  Free Software Foundation;  either version 2 of the  License, or (at your
- *  option) any later version.
- *
- *  THIS  SOFTWARE  IS PROVIDED   ``AS  IS'' AND   ANY  EXPRESS OR IMPLIED
- *  WARRANTIES,   INCLUDING, BUT NOT  LIMITED  TO, THE IMPLIED WARRANTIES OF
- *  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN
- *  NO  EVENT  SHALL   THE AUTHOR  BE    LIABLE FOR ANY   DIRECT, INDIRECT,
- *  INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- *  NOT LIMITED   TO, PROCUREMENT OF  SUBSTITUTE GOODS  OR SERVICES; LOSS OF
- *  USE, DATA,  OR PROFITS; OR  BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
- *  ANY THEORY OF LIABILITY, WHETHER IN  CONTRACT, STRICT LIABILITY, OR TORT
- *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
- *  THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- *  You should have received a copy of the  GNU General Public License along
- *  with this program; if not, write  to the Free Software Foundation, Inc.,
- *  675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#include <linux/delay.h>
-#include <linux/gpio.h>
-#include <linux/init.h>
-#include <linux/interrupt.h>
-#include <linux/pm.h>
-#include <asm/mach-au1x00/au1000.h>
-#include <asm/mach-pb1x00/pb1000.h>
-#include <asm/reboot.h>
-#include <prom.h>
-
-#include "../platform.h"
-
-const char *get_system_type(void)
-{
-	return "Alchemy Pb1000";
-}
-
-static void board_reset(char *c)
-{
-	asm volatile ("jr %0" : : "r" (0xbfc00000));
-}
-
-static void board_power_off(void)
-{
-	while (1)
-		asm volatile (
-		"	.set	mips32					\n"
-		"	wait						\n"
-		"	.set	mips0					\n");
-}
-
-void __init board_setup(void)
-{
-	u32 pin_func, static_cfg0;
-	u32 sys_freqctrl, sys_clksrc;
-	u32 prid = read_c0_prid();
-
-	sys_freqctrl = 0;
-	sys_clksrc = 0;
-
-	/* Set AUX clock to 12 MHz * 8 = 96 MHz */
-	au_writel(8, SYS_AUXPLL);
-	alchemy_gpio1_input_enable();
-	udelay(100);
-
-#if defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE)
-	/* Zero and disable FREQ2 */
-	sys_freqctrl = au_readl(SYS_FREQCTRL0);
-	sys_freqctrl &= ~0xFFF00000;
-	au_writel(sys_freqctrl, SYS_FREQCTRL0);
-
-	/* Zero and disable USBH/USBD clocks */
-	sys_clksrc = au_readl(SYS_CLKSRC);
-	sys_clksrc &= ~(SYS_CS_CUD | SYS_CS_DUD | SYS_CS_MUD_MASK |
-		        SYS_CS_CUH | SYS_CS_DUH | SYS_CS_MUH_MASK);
-	au_writel(sys_clksrc, SYS_CLKSRC);
-
-	sys_freqctrl = au_readl(SYS_FREQCTRL0);
-	sys_freqctrl &= ~0xFFF00000;
-
-	sys_clksrc = au_readl(SYS_CLKSRC);
-	sys_clksrc &= ~(SYS_CS_CUD | SYS_CS_DUD | SYS_CS_MUD_MASK |
-		        SYS_CS_CUH | SYS_CS_DUH | SYS_CS_MUH_MASK);
-
-	switch (prid & 0x000000FF) {
-	case 0x00: /* DA */
-	case 0x01: /* HA */
-	case 0x02: /* HB */
-		/* CPU core freq to 48 MHz to slow it way down... */
-		au_writel(4, SYS_CPUPLL);
-
-		/*
-		 * Setup 48 MHz FREQ2 from CPUPLL for USB Host
-		 * FRDIV2 = 3 -> div by 8 of 384 MHz -> 48 MHz
-		 */
-		sys_freqctrl |= (3 << SYS_FC_FRDIV2_BIT) | SYS_FC_FE2;
-		au_writel(sys_freqctrl, SYS_FREQCTRL0);
-
-		/* CPU core freq to 384 MHz */
-		au_writel(0x20, SYS_CPUPLL);
-
-		printk(KERN_INFO "Au1000: 48 MHz OHCI workaround enabled\n");
-		break;
-
-	default: /* HC and newer */
-		/* FREQ2 = aux / 2 = 48 MHz */
-		sys_freqctrl |= (0 << SYS_FC_FRDIV2_BIT) |
-				 SYS_FC_FE2 | SYS_FC_FS2;
-		au_writel(sys_freqctrl, SYS_FREQCTRL0);
-		break;
-	}
-
-	/*
-	 * Route 48 MHz FREQ2 into USB Host and/or Device
-	 */
-	sys_clksrc |= SYS_CS_MUX_FQ2 << SYS_CS_MUH_BIT;
-	au_writel(sys_clksrc, SYS_CLKSRC);
-
-	/* Configure pins GPIO[14:9] as GPIO */
-	pin_func = au_readl(SYS_PINFUNC) & ~(SYS_PF_UR3 | SYS_PF_USB);
-
-	/* 2nd USB port is USB host */
-	pin_func |= SYS_PF_USB;
-
-	au_writel(pin_func, SYS_PINFUNC);
-
-	alchemy_gpio_direction_input(11);
-	alchemy_gpio_direction_input(13);
-	alchemy_gpio_direction_output(4, 0);
-	alchemy_gpio_direction_output(5, 0);
-#endif /* defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE) */
-
-	/* Make GPIO 15 an input (for interrupt line) */
-	pin_func = au_readl(SYS_PINFUNC) & ~SYS_PF_IRF;
-	/* We don't need I2S, so make it available for GPIO[31:29] */
-	pin_func |= SYS_PF_I2S;
-	au_writel(pin_func, SYS_PINFUNC);
-
-	alchemy_gpio_direction_input(15);
-
-	static_cfg0 = au_readl(MEM_STCFG0) & ~0xc00;
-	au_writel(static_cfg0, MEM_STCFG0);
-
-	/* configure RCE2* for LCD */
-	au_writel(0x00000004, MEM_STCFG2);
-
-	/* MEM_STTIME2 */
-	au_writel(0x09000000, MEM_STTIME2);
-
-	/* Set 32-bit base address decoding for RCE2* */
-	au_writel(0x10003ff0, MEM_STADDR2);
-
-	/*
-	 * PCI CPLD setup
-	 * Expand CE0 to cover PCI
-	 */
-	au_writel(0x11803e40, MEM_STADDR1);
-
-	/* Burst visibility on */
-	au_writel(au_readl(MEM_STCFG0) | 0x1000, MEM_STCFG0);
-
-	au_writel(0x83, MEM_STCFG1);	     /* ewait enabled, flash timing */
-	au_writel(0x33030a10, MEM_STTIME1);  /* slower timing for FPGA */
-
-	/* Setup the static bus controller */
-	au_writel(0x00000002, MEM_STCFG3);  /* type = PCMCIA */
-	au_writel(0x280E3D07, MEM_STTIME3); /* 250ns cycle time */
-	au_writel(0x10000000, MEM_STADDR3); /* any PCMCIA select */
-
-	/*
-	 * Enable Au1000 BCLK switching - note: sed1356 must not use
-	 * its BCLK (Au1000 LCLK) for any timings
-	 */
-	switch (prid & 0x000000FF) {
-	case 0x00: /* DA */
-	case 0x01: /* HA */
-	case 0x02: /* HB */
-		break;
-	default:  /* HC and newer */
-		/*
-		 * Enable sys bus clock divider when IDLE state or no bus
-		 * activity.
-		 */
-		au_writel(au_readl(SYS_POWERCTRL) | (0x3 << 5), SYS_POWERCTRL);
-		break;
-	}
-
-	pm_power_off = board_power_off;
-	_machine_halt = board_power_off;
-	_machine_restart = board_reset;
-}
-
-static int __init pb1000_init_irq(void)
-{
-	irq_set_irq_type(AU1000_GPIO15_INT, IRQF_TRIGGER_LOW);
-	return 0;
-}
-arch_initcall(pb1000_init_irq);
-
-static int __init pb1000_device_init(void)
-{
-	return db1x_register_norflash(8 * 1024 * 1024, 4, 0);
-}
-device_initcall(pb1000_device_init);

arch/mips/alchemy/devboards/pb1100/board_setup.c → arch/mips/alchemy/devboards/pb1100.c

@@ -1,42 +1,37 @@
 /*
- * Copyright 2002, 2008 MontaVista Software Inc.
- * Author: MontaVista Software, Inc. <source@mvista.com>
+ * Pb1100 board platform device registration
  *
- *  This program is free software; you can redistribute  it and/or modify it
- *  under  the terms of  the GNU General  Public License as published by the
- *  Free Software Foundation;  either version 2 of the  License, or (at your
- *  option) any later version.
+ * Copyright (C) 2009 Manuel Lauss
  *
- *  THIS  SOFTWARE  IS PROVIDED   ``AS  IS'' AND   ANY  EXPRESS OR IMPLIED
- *  WARRANTIES,   INCLUDING, BUT NOT  LIMITED  TO, THE IMPLIED WARRANTIES OF
- *  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN
- *  NO  EVENT  SHALL   THE AUTHOR  BE    LIABLE FOR ANY   DIRECT, INDIRECT,
- *  INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- *  NOT LIMITED   TO, PROCUREMENT OF  SUBSTITUTE GOODS  OR SERVICES; LOSS OF
- *  USE, DATA,  OR PROFITS; OR  BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
- *  ANY THEORY OF LIABILITY, WHETHER IN  CONTRACT, STRICT LIABILITY, OR TORT
- *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
- *  THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
  *
- *  You should have received a copy of the  GNU General Public License along
- *  with this program; if not, write  to the Free Software Foundation, Inc.,
- *  675 Mass Ave, Cambridge, MA 02139, USA.
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
  */
 
+#include <linux/delay.h>
 #include <linux/gpio.h>
 #include <linux/init.h>
-#include <linux/delay.h>
 #include <linux/interrupt.h>
-
+#include <linux/dma-mapping.h>
+#include <linux/platform_device.h>
 #include <asm/mach-au1x00/au1000.h>
 #include <asm/mach-db1x00/bcsr.h>
-
 #include <prom.h>
-
+#include "platform.h"
 
 const char *get_system_type(void)
 {
-	return "Alchemy Pb1100";
+	return "PB1100";
 }
 
 void __init board_setup(void)
@@ -115,13 +110,58 @@ void __init board_setup(void)
 	}
 }
 
-static int __init pb1100_init_irq(void)
+/******************************************************************************/
+
+static struct resource au1100_lcd_resources[] = {
+	[0] = {
+		.start	= AU1100_LCD_PHYS_ADDR,
+		.end	= AU1100_LCD_PHYS_ADDR + 0x800 - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= AU1100_LCD_INT,
+		.end	= AU1100_LCD_INT,
+		.flags	= IORESOURCE_IRQ,
+	}
+};
+
+static u64 au1100_lcd_dmamask = DMA_BIT_MASK(32);
+
+static struct platform_device au1100_lcd_device = {
+	.name		= "au1100-lcd",
+	.id		= 0,
+	.dev = {
+		.dma_mask		= &au1100_lcd_dmamask,
+		.coherent_dma_mask	= DMA_BIT_MASK(32),
+	},
+	.num_resources	= ARRAY_SIZE(au1100_lcd_resources),
+	.resource	= au1100_lcd_resources,
+};
+
+static int __init pb1100_dev_init(void)
 {
+	int swapped;
+
 	irq_set_irq_type(AU1100_GPIO9_INT, IRQF_TRIGGER_LOW); /* PCCD# */
 	irq_set_irq_type(AU1100_GPIO10_INT, IRQF_TRIGGER_LOW); /* PCSTSCHG# */
 	irq_set_irq_type(AU1100_GPIO11_INT, IRQF_TRIGGER_LOW); /* PCCard# */
 	irq_set_irq_type(AU1100_GPIO13_INT, IRQF_TRIGGER_LOW); /* DC_IRQ# */
 
+	/* PCMCIA. single socket, identical to Pb1500 */
+	db1x_register_pcmcia_socket(
+		AU1000_PCMCIA_ATTR_PHYS_ADDR,
+		AU1000_PCMCIA_ATTR_PHYS_ADDR + 0x000400000 - 1,
+		AU1000_PCMCIA_MEM_PHYS_ADDR,
+		AU1000_PCMCIA_MEM_PHYS_ADDR  + 0x000400000 - 1,
+		AU1000_PCMCIA_IO_PHYS_ADDR,
+		AU1000_PCMCIA_IO_PHYS_ADDR   + 0x000010000 - 1,
+		AU1100_GPIO11_INT, AU1100_GPIO9_INT,	 /* card / insert */
+		/*AU1100_GPIO10_INT*/0, 0, 0); /* stschg / eject / id */
+
+	swapped = bcsr_read(BCSR_STATUS) &  BCSR_STATUS_DB1000_SWAPBOOT;
+	db1x_register_norflash(64 * 1024 * 1024, 4, swapped);
+	platform_device_register(&au1100_lcd_device);
+
 	return 0;
 }
-arch_initcall(pb1100_init_irq);
+device_initcall(pb1100_dev_init);

arch/mips/alchemy/devboards/pb1100/Makefile

@@ -1,8 +0,0 @@
-#
-#  Copyright 2000, 2001, 2008 MontaVista Software Inc.
-#  Author: MontaVista Software, Inc. <source@mvista.com>
-#
-# Makefile for the Alchemy Semiconductor Pb1100 board.
-#
-
-obj-y := board_setup.o platform.o

arch/mips/alchemy/devboards/pb1100/platform.c

@@ -1,77 +0,0 @@
-/*
- * Pb1100 board platform device registration
- *
- * Copyright (C) 2009 Manuel Lauss
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
- */
-
-#include <linux/init.h>
-#include <linux/dma-mapping.h>
-#include <linux/platform_device.h>
-
-#include <asm/mach-au1x00/au1000.h>
-#include <asm/mach-db1x00/bcsr.h>
-
-#include "../platform.h"
-
-static struct resource au1100_lcd_resources[] = {
-	[0] = {
-		.start	= AU1100_LCD_PHYS_ADDR,
-		.end	= AU1100_LCD_PHYS_ADDR + 0x800 - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= AU1100_LCD_INT,
-		.end	= AU1100_LCD_INT,
-		.flags	= IORESOURCE_IRQ,
-	}
-};
-
-static u64 au1100_lcd_dmamask = DMA_BIT_MASK(32);
-
-static struct platform_device au1100_lcd_device = {
-	.name		= "au1100-lcd",
-	.id		= 0,
-	.dev = {
-		.dma_mask		= &au1100_lcd_dmamask,
-		.coherent_dma_mask	= DMA_BIT_MASK(32),
-	},
-	.num_resources	= ARRAY_SIZE(au1100_lcd_resources),
-	.resource	= au1100_lcd_resources,
-};
-
-static int __init pb1100_dev_init(void)
-{
-	int swapped;
-
-	/* PCMCIA. single socket, identical to Pb1500 */
-	db1x_register_pcmcia_socket(
-		AU1000_PCMCIA_ATTR_PHYS_ADDR,
-		AU1000_PCMCIA_ATTR_PHYS_ADDR + 0x000400000 - 1,
-		AU1000_PCMCIA_MEM_PHYS_ADDR,
-		AU1000_PCMCIA_MEM_PHYS_ADDR  + 0x000400000 - 1,
-		AU1000_PCMCIA_IO_PHYS_ADDR,
-		AU1000_PCMCIA_IO_PHYS_ADDR   + 0x000010000 - 1,
-		AU1100_GPIO11_INT, AU1100_GPIO9_INT,	 /* card / insert */
-		/*AU1100_GPIO10_INT*/0, 0, 0); /* stschg / eject / id */
-
-	swapped = bcsr_read(BCSR_STATUS) &  BCSR_STATUS_DB1000_SWAPBOOT;
-	db1x_register_norflash(64 * 1024 * 1024, 4, swapped);
-	platform_device_register(&au1100_lcd_device);
-
-	return 0;
-}
-device_initcall(pb1100_dev_init);

arch/mips/alchemy/devboards/pb1200/Makefile

@@ -1,5 +0,0 @@
-#
-# Makefile for the Alchemy Semiconductor Pb1200/DBAu1200 boards.
-#
-
-obj-y := board_setup.o platform.o

arch/mips/alchemy/devboards/pb1200/board_setup.c

@@ -1,174 +0,0 @@
-/*
- *
- * BRIEF MODULE DESCRIPTION
- *	Alchemy Pb1200/Db1200 board setup.
- *
- *  This program is free software; you can redistribute  it and/or modify it
- *  under  the terms of  the GNU General  Public License as published by the
- *  Free Software Foundation;  either version 2 of the  License, or (at your
- *  option) any later version.
- *
- *  THIS  SOFTWARE  IS PROVIDED   ``AS  IS'' AND   ANY  EXPRESS OR IMPLIED
- *  WARRANTIES,   INCLUDING, BUT NOT  LIMITED  TO, THE IMPLIED WARRANTIES OF
- *  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN
- *  NO  EVENT  SHALL   THE AUTHOR  BE    LIABLE FOR ANY   DIRECT, INDIRECT,
- *  INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- *  NOT LIMITED   TO, PROCUREMENT OF  SUBSTITUTE GOODS  OR SERVICES; LOSS OF
- *  USE, DATA,  OR PROFITS; OR  BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
- *  ANY THEORY OF LIABILITY, WHETHER IN  CONTRACT, STRICT LIABILITY, OR TORT
- *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
- *  THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- *  You should have received a copy of the  GNU General Public License along
- *  with this program; if not, write  to the Free Software Foundation, Inc.,
- *  675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#include <linux/init.h>
-#include <linux/interrupt.h>
-#include <linux/sched.h>
-
-#include <asm/mach-au1x00/au1000.h>
-#include <asm/mach-db1x00/bcsr.h>
-
-#ifdef CONFIG_MIPS_PB1200
-#include <asm/mach-pb1x00/pb1200.h>
-#endif
-
-#ifdef CONFIG_MIPS_DB1200
-#include <asm/mach-db1x00/db1200.h>
-#define PB1200_INT_BEGIN DB1200_INT_BEGIN
-#define PB1200_INT_END DB1200_INT_END
-#endif
-
-#include <prom.h>
-
-const char *get_system_type(void)
-{
-	return "Alchemy Pb1200";
-}
-
-void __init board_setup(void)
-{
-	printk(KERN_INFO "AMD Alchemy Pb1200 Board\n");
-	bcsr_init(PB1200_BCSR_PHYS_ADDR,
-		  PB1200_BCSR_PHYS_ADDR + PB1200_BCSR_HEXLED_OFS);
-
-#if 0
-	{
-		u32 pin_func;
-
-		/*
-		 * Enable PSC1 SYNC for AC97.  Normaly done in audio driver,
-		 * but it is board specific code, so put it here.
-		 */
-		pin_func = au_readl(SYS_PINFUNC);
-		au_sync();
-		pin_func |= SYS_PF_MUST_BE_SET | SYS_PF_PSC1_S1;
-		au_writel(pin_func, SYS_PINFUNC);
-
-		au_writel(0, (u32)bcsr | 0x10); /* turn off PCMCIA power */
-		au_sync();
-	}
-#endif
-
-#if defined(CONFIG_I2C_AU1550)
-	{
-		u32 freq0, clksrc;
-		u32 pin_func;
-
-		/* Select SMBus in CPLD */
-		bcsr_mod(BCSR_RESETS, BCSR_RESETS_PSC0MUX, 0);
-
-		pin_func = au_readl(SYS_PINFUNC);
-		au_sync();
-		pin_func &= ~(SYS_PINFUNC_P0A | SYS_PINFUNC_P0B);
-		/* Set GPIOs correctly */
-		pin_func |= 2 << 17;
-		au_writel(pin_func, SYS_PINFUNC);
-		au_sync();
-
-		/* The I2C driver depends on 50 MHz clock */
-		freq0 = au_readl(SYS_FREQCTRL0);
-		au_sync();
-		freq0 &= ~(SYS_FC_FRDIV1_MASK | SYS_FC_FS1 | SYS_FC_FE1);
-		freq0 |= 3 << SYS_FC_FRDIV1_BIT;
-		/* 396 MHz / (3 + 1) * 2 == 49.5 MHz */
-		au_writel(freq0, SYS_FREQCTRL0);
-		au_sync();
-		freq0 |= SYS_FC_FE1;
-		au_writel(freq0, SYS_FREQCTRL0);
-		au_sync();
-
-		clksrc = au_readl(SYS_CLKSRC);
-		au_sync();
-		clksrc &= ~(SYS_CS_CE0 | SYS_CS_DE0 | SYS_CS_ME0_MASK);
-		/* Bit 22 is EXTCLK0 for PSC0 */
-		clksrc |= SYS_CS_MUX_FQ1 << SYS_CS_ME0_BIT;
-		au_writel(clksrc, SYS_CLKSRC);
-		au_sync();
-	}
-#endif
-
-	/*
-	 * The Pb1200 development board uses external MUX for PSC0 to
-	 * support SMB/SPI. bcsr_resets bit 12: 0=SMB 1=SPI
-	 */
-#ifdef CONFIG_I2C_AU1550
-	bcsr_mod(BCSR_RESETS, BCSR_RESETS_PSC0MUX, 0);
-#endif
-	au_sync();
-}
-
-static int __init pb1200_init_irq(void)
-{
-	/* We have a problem with CPLD rev 3. */
-	if (BCSR_WHOAMI_CPLD(bcsr_read(BCSR_WHOAMI)) <= 3) {
-		printk(KERN_ERR "WARNING!!!\n");
-		printk(KERN_ERR "WARNING!!!\n");
-		printk(KERN_ERR "WARNING!!!\n");
-		printk(KERN_ERR "WARNING!!!\n");
-		printk(KERN_ERR "WARNING!!!\n");
-		printk(KERN_ERR "WARNING!!!\n");
-		printk(KERN_ERR "Pb1200 must be at CPLD rev 4. Please have Pb1200\n");
-		printk(KERN_ERR "updated to latest revision. This software will\n");
-		printk(KERN_ERR "not work on anything less than CPLD rev 4.\n");
-		printk(KERN_ERR "WARNING!!!\n");
-		printk(KERN_ERR "WARNING!!!\n");
-		printk(KERN_ERR "WARNING!!!\n");
-		printk(KERN_ERR "WARNING!!!\n");
-		printk(KERN_ERR "WARNING!!!\n");
-		printk(KERN_ERR "WARNING!!!\n");
-		panic("Game over.  Your score is 0.");
-	}
-
-	irq_set_irq_type(AU1200_GPIO7_INT, IRQF_TRIGGER_LOW);
-	bcsr_init_irq(PB1200_INT_BEGIN, PB1200_INT_END, AU1200_GPIO7_INT);
-
-	return 0;
-}
-arch_initcall(pb1200_init_irq);
-
-
-int board_au1200fb_panel(void)
-{
-	return (bcsr_read(BCSR_SWITCHES) >> 8) & 0x0f;
-}
-
-int board_au1200fb_panel_init(void)
-{
-	/* Apply power */
-	bcsr_mod(BCSR_BOARD, 0, BCSR_BOARD_LCDVEE | BCSR_BOARD_LCDVDD |
-				BCSR_BOARD_LCDBL);
-	/* printk(KERN_DEBUG "board_au1200fb_panel_init()\n"); */
-	return 0;
-}
-
-int board_au1200fb_panel_shutdown(void)
-{
-	/* Remove power */
-	bcsr_mod(BCSR_BOARD, BCSR_BOARD_LCDVEE | BCSR_BOARD_LCDVDD |
-			     BCSR_BOARD_LCDBL, 0);
-	/* printk(KERN_DEBUG "board_au1200fb_panel_shutdown()\n"); */
-	return 0;
-}

arch/mips/alchemy/devboards/pb1200/platform.c

@@ -1,339 +0,0 @@
-/*
- * Pb1200/DBAu1200 board platform device registration
- *
- * Copyright (C) 2008 MontaVista Software Inc. <source@mvista.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
- */
-
-#include <linux/dma-mapping.h>
-#include <linux/init.h>
-#include <linux/leds.h>
-#include <linux/platform_device.h>
-#include <linux/smc91x.h>
-
-#include <asm/mach-au1x00/au1000.h>
-#include <asm/mach-au1x00/au1100_mmc.h>
-#include <asm/mach-au1x00/au1xxx_dbdma.h>
-#include <asm/mach-db1x00/bcsr.h>
-#include <asm/mach-pb1x00/pb1200.h>
-
-#include "../platform.h"
-
-static int mmc_activity;
-
-static void pb1200mmc0_set_power(void *mmc_host, int state)
-{
-	if (state)
-		bcsr_mod(BCSR_BOARD, 0, BCSR_BOARD_SD0PWR);
-	else
-		bcsr_mod(BCSR_BOARD, BCSR_BOARD_SD0PWR, 0);
-
-	msleep(1);
-}
-
-static int pb1200mmc0_card_readonly(void *mmc_host)
-{
-	return (bcsr_read(BCSR_STATUS) & BCSR_STATUS_SD0WP) ? 1 : 0;
-}
-
-static int pb1200mmc0_card_inserted(void *mmc_host)
-{
-	return (bcsr_read(BCSR_SIGSTAT) & BCSR_INT_SD0INSERT) ? 1 : 0;
-}
-
-static void pb1200_mmcled_set(struct led_classdev *led,
-			enum led_brightness brightness)
-{
-	if (brightness != LED_OFF) {
-		if (++mmc_activity == 1)
-			bcsr_mod(BCSR_LEDS, BCSR_LEDS_LED0, 0);
-	} else {
-		if (--mmc_activity == 0)
-			bcsr_mod(BCSR_LEDS, 0, BCSR_LEDS_LED0);
-	}
-}
-
-static struct led_classdev pb1200mmc_led = {
-	.brightness_set	= pb1200_mmcled_set,
-};
-
-static void pb1200mmc1_set_power(void *mmc_host, int state)
-{
-	if (state)
-		bcsr_mod(BCSR_BOARD, 0, BCSR_BOARD_SD1PWR);
-	else
-		bcsr_mod(BCSR_BOARD, BCSR_BOARD_SD1PWR, 0);
-
-	msleep(1);
-}
-
-static int pb1200mmc1_card_readonly(void *mmc_host)
-{
-	return (bcsr_read(BCSR_STATUS) & BCSR_STATUS_SD1WP) ? 1 : 0;
-}
-
-static int pb1200mmc1_card_inserted(void *mmc_host)
-{
-	return (bcsr_read(BCSR_SIGSTAT) & BCSR_INT_SD1INSERT) ? 1 : 0;
-}
-
-static struct au1xmmc_platform_data pb1200mmc_platdata[2] = {
-	[0] = {
-		.set_power	= pb1200mmc0_set_power,
-		.card_inserted	= pb1200mmc0_card_inserted,
-		.card_readonly	= pb1200mmc0_card_readonly,
-		.cd_setup	= NULL,		/* use poll-timer in driver */
-		.led		= &pb1200mmc_led,
-	},
-	[1] = {
-		.set_power	= pb1200mmc1_set_power,
-		.card_inserted	= pb1200mmc1_card_inserted,
-		.card_readonly	= pb1200mmc1_card_readonly,
-		.cd_setup	= NULL,		/* use poll-timer in driver */
-		.led		= &pb1200mmc_led,
-	},
-};
-
-static u64 au1xxx_mmc_dmamask =  DMA_BIT_MASK(32);
-
-static struct resource au1200_mmc0_res[] = {
-	[0] = {
-		.start	= AU1100_SD0_PHYS_ADDR,
-		.end	= AU1100_SD0_PHYS_ADDR + 0xfff,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= AU1200_SD_INT,
-		.end	= AU1200_SD_INT,
-		.flags	= IORESOURCE_IRQ,
-	},
-	[2] = {
-		.start	= AU1200_DSCR_CMD0_SDMS_TX0,
-		.end	= AU1200_DSCR_CMD0_SDMS_TX0,
-		.flags	= IORESOURCE_DMA,
-	},
-	[3] = {
-		.start	= AU1200_DSCR_CMD0_SDMS_RX0,
-		.end	= AU1200_DSCR_CMD0_SDMS_RX0,
-		.flags	= IORESOURCE_DMA,
-	}
-};
-
-static struct platform_device pb1200_mmc0_dev = {
-	.name		= "au1xxx-mmc",
-	.id		= 0,
-	.dev = {
-		.dma_mask		= &au1xxx_mmc_dmamask,
-		.coherent_dma_mask	= DMA_BIT_MASK(32),
-		.platform_data		= &pb1200mmc_platdata[0],
-	},
-	.num_resources	= ARRAY_SIZE(au1200_mmc0_res),
-	.resource	= au1200_mmc0_res,
-};
-
-static struct resource au1200_mmc1_res[] = {
-	[0] = {
-		.start	= AU1100_SD1_PHYS_ADDR,
-		.end	= AU1100_SD1_PHYS_ADDR + 0xfff,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= AU1200_SD_INT,
-		.end	= AU1200_SD_INT,
-		.flags	= IORESOURCE_IRQ,
-	},
-	[2] = {
-		.start	= AU1200_DSCR_CMD0_SDMS_TX1,
-		.end	= AU1200_DSCR_CMD0_SDMS_TX1,
-		.flags	= IORESOURCE_DMA,
-	},
-	[3] = {
-		.start	= AU1200_DSCR_CMD0_SDMS_RX1,
-		.end	= AU1200_DSCR_CMD0_SDMS_RX1,
-		.flags	= IORESOURCE_DMA,
-	}
-};
-
-static struct platform_device pb1200_mmc1_dev = {
-	.name		= "au1xxx-mmc",
-	.id		= 1,
-	.dev = {
-		.dma_mask		= &au1xxx_mmc_dmamask,
-		.coherent_dma_mask	= DMA_BIT_MASK(32),
-		.platform_data		= &pb1200mmc_platdata[1],
-	},
-	.num_resources	= ARRAY_SIZE(au1200_mmc1_res),
-	.resource	= au1200_mmc1_res,
-};
-
-
-static struct resource ide_resources[] = {
-	[0] = {
-		.start	= IDE_PHYS_ADDR,
-		.end 	= IDE_PHYS_ADDR + IDE_PHYS_LEN - 1,
-		.flags	= IORESOURCE_MEM
-	},
-	[1] = {
-		.start	= IDE_INT,
-		.end	= IDE_INT,
-		.flags	= IORESOURCE_IRQ
-	},
-	[2] = {
-		.start	= AU1200_DSCR_CMD0_DMA_REQ1,
-		.end	= AU1200_DSCR_CMD0_DMA_REQ1,
-		.flags	= IORESOURCE_DMA,
-	},
-};
-
-static u64 ide_dmamask = DMA_BIT_MASK(32);
-
-static struct platform_device ide_device = {
-	.name		= "au1200-ide",
-	.id		= 0,
-	.dev = {
-		.dma_mask 		= &ide_dmamask,
-		.coherent_dma_mask	= DMA_BIT_MASK(32),
-	},
-	.num_resources	= ARRAY_SIZE(ide_resources),
-	.resource	= ide_resources
-};
-
-static struct smc91x_platdata smc_data = {
-	.flags	= SMC91X_NOWAIT | SMC91X_USE_16BIT,
-	.leda	= RPC_LED_100_10,
-	.ledb	= RPC_LED_TX_RX,
-};
-
-static struct resource smc91c111_resources[] = {
-	[0] = {
-		.name	= "smc91x-regs",
-		.start	= SMC91C111_PHYS_ADDR,
-		.end	= SMC91C111_PHYS_ADDR + 0xf,
-		.flags	= IORESOURCE_MEM
-	},
-	[1] = {
-		.start	= SMC91C111_INT,
-		.end	= SMC91C111_INT,
-		.flags	= IORESOURCE_IRQ
-	},
-};
-
-static struct platform_device smc91c111_device = {
-	.dev	= {
-		.platform_data	= &smc_data,
-	},
-	.name		= "smc91x",
-	.id		= -1,
-	.num_resources	= ARRAY_SIZE(smc91c111_resources),
-	.resource	= smc91c111_resources
-};
-
-static struct resource au1200_psc0_res[] = {
-	[0] = {
-		.start	= AU1550_PSC0_PHYS_ADDR,
-		.end	= AU1550_PSC0_PHYS_ADDR + 0xfff,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= AU1200_PSC0_INT,
-		.end	= AU1200_PSC0_INT,
-		.flags	= IORESOURCE_IRQ,
-	},
-	[2] = {
-		.start	= AU1200_DSCR_CMD0_PSC0_TX,
-		.end	= AU1200_DSCR_CMD0_PSC0_TX,
-		.flags	= IORESOURCE_DMA,
-	},
-	[3] = {
-		.start	= AU1200_DSCR_CMD0_PSC0_RX,
-		.end	= AU1200_DSCR_CMD0_PSC0_RX,
-		.flags	= IORESOURCE_DMA,
-	},
-};
-
-static struct platform_device pb1200_i2c_dev = {
-	.name		= "au1xpsc_smbus",
-	.id		= 0,	/* bus number */
-	.num_resources	= ARRAY_SIZE(au1200_psc0_res),
-	.resource	= au1200_psc0_res,
-};
-
-static struct resource au1200_lcd_res[] = {
-	[0] = {
-		.start	= AU1200_LCD_PHYS_ADDR,
-		.end	= AU1200_LCD_PHYS_ADDR + 0x800 - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= AU1200_LCD_INT,
-		.end	= AU1200_LCD_INT,
-		.flags	= IORESOURCE_IRQ,
-	}
-};
-
-static u64 au1200_lcd_dmamask = DMA_BIT_MASK(32);
-
-static struct platform_device au1200_lcd_dev = {
-	.name		= "au1200-lcd",
-	.id		= 0,
-	.dev = {
-		.dma_mask		= &au1200_lcd_dmamask,
-		.coherent_dma_mask	= DMA_BIT_MASK(32),
-	},
-	.num_resources	= ARRAY_SIZE(au1200_lcd_res),
-	.resource	= au1200_lcd_res,
-};
-
-static struct platform_device *board_platform_devices[] __initdata = {
-	&ide_device,
-	&smc91c111_device,
-	&pb1200_i2c_dev,
-	&pb1200_mmc0_dev,
-	&pb1200_mmc1_dev,
-	&au1200_lcd_dev,
-};
-
-static int __init board_register_devices(void)
-{
-	int swapped;
-
-	db1x_register_pcmcia_socket(
-		AU1000_PCMCIA_ATTR_PHYS_ADDR,
-		AU1000_PCMCIA_ATTR_PHYS_ADDR + 0x000400000 - 1,
-		AU1000_PCMCIA_MEM_PHYS_ADDR,
-		AU1000_PCMCIA_MEM_PHYS_ADDR  + 0x000400000 - 1,
-		AU1000_PCMCIA_IO_PHYS_ADDR,
-		AU1000_PCMCIA_IO_PHYS_ADDR   + 0x000010000 - 1,
-		PB1200_PC0_INT, PB1200_PC0_INSERT_INT,
-		/*PB1200_PC0_STSCHG_INT*/0, PB1200_PC0_EJECT_INT, 0);
-
-	db1x_register_pcmcia_socket(
-		AU1000_PCMCIA_ATTR_PHYS_ADDR + 0x008000000,
-		AU1000_PCMCIA_ATTR_PHYS_ADDR + 0x008400000 - 1,
-		AU1000_PCMCIA_MEM_PHYS_ADDR  + 0x008000000,
-		AU1000_PCMCIA_MEM_PHYS_ADDR  + 0x008400000 - 1,
-		AU1000_PCMCIA_IO_PHYS_ADDR   + 0x008000000,
-		AU1000_PCMCIA_IO_PHYS_ADDR   + 0x008010000 - 1,
-		PB1200_PC1_INT, PB1200_PC1_INSERT_INT,
-		/*PB1200_PC1_STSCHG_INT*/0, PB1200_PC1_EJECT_INT, 1);
-
-	swapped = bcsr_read(BCSR_STATUS) &  BCSR_STATUS_DB1200_SWAPBOOT;
-	db1x_register_norflash(128 * 1024 * 1024, 2, swapped);
-
-	return platform_add_devices(board_platform_devices,
-				    ARRAY_SIZE(board_platform_devices));
-}
-device_initcall(board_register_devices);

arch/mips/alchemy/devboards/pb1500/board_setup.c → arch/mips/alchemy/devboards/pb1500.c

@@ -1,41 +1,37 @@
 /*
- * Copyright 2000, 2008 MontaVista Software Inc.
- * Author: MontaVista Software, Inc. <source@mvista.com>
+ * Pb1500 board support.
  *
- *  This program is free software; you can redistribute  it and/or modify it
- *  under  the terms of  the GNU General  Public License as published by the
- *  Free Software Foundation;  either version 2 of the  License, or (at your
- *  option) any later version.
+ * Copyright (C) 2009 Manuel Lauss
  *
- *  THIS  SOFTWARE  IS PROVIDED   ``AS  IS'' AND   ANY  EXPRESS OR IMPLIED
- *  WARRANTIES,   INCLUDING, BUT NOT  LIMITED  TO, THE IMPLIED WARRANTIES OF
- *  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN
- *  NO  EVENT  SHALL   THE AUTHOR  BE    LIABLE FOR ANY   DIRECT, INDIRECT,
- *  INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- *  NOT LIMITED   TO, PROCUREMENT OF  SUBSTITUTE GOODS  OR SERVICES; LOSS OF
- *  USE, DATA,  OR PROFITS; OR  BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
- *  ANY THEORY OF LIABILITY, WHETHER IN  CONTRACT, STRICT LIABILITY, OR TORT
- *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
- *  THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
  *
- *  You should have received a copy of the  GNU General Public License along
- *  with this program; if not, write  to the Free Software Foundation, Inc.,
- *  675 Mass Ave, Cambridge, MA 02139, USA.
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
  */
 
 #include <linux/delay.h>
+#include <linux/dma-mapping.h>
 #include <linux/gpio.h>
 #include <linux/init.h>
 #include <linux/interrupt.h>
-
+#include <linux/platform_device.h>
 #include <asm/mach-au1x00/au1000.h>
 #include <asm/mach-db1x00/bcsr.h>
-
 #include <prom.h>
+#include "platform.h"
 
 const char *get_system_type(void)
 {
-	return "Alchemy Pb1500";
+	return "PB1500";
 }
 
 void __init board_setup(void)
@@ -123,17 +119,80 @@ void __init board_setup(void)
 	}
 }
 
-static int __init pb1500_init_irq(void)
+/******************************************************************************/
+
+static int pb1500_map_pci_irq(const struct pci_dev *d, u8 slot, u8 pin)
 {
-	irq_set_irq_type(AU1500_GPIO9_INT, IRQF_TRIGGER_LOW);   /* CD0# */
-	irq_set_irq_type(AU1500_GPIO10_INT, IRQF_TRIGGER_LOW);  /* CARD0 */
-	irq_set_irq_type(AU1500_GPIO11_INT, IRQF_TRIGGER_LOW);  /* STSCHG0# */
+	if ((slot < 12) || (slot > 13) || pin == 0)
+		return -1;
+	if (slot == 12)
+		return (pin == 1) ? AU1500_PCI_INTA : 0xff;
+	if (slot == 13) {
+		switch (pin) {
+		case 1: return AU1500_PCI_INTA;
+		case 2: return AU1500_PCI_INTB;
+		case 3: return AU1500_PCI_INTC;
+		case 4: return AU1500_PCI_INTD;
+		}
+	}
+	return -1;
+}
+
+static struct resource alchemy_pci_host_res[] = {
+	[0] = {
+		.start	= AU1500_PCI_PHYS_ADDR,
+		.end	= AU1500_PCI_PHYS_ADDR + 0xfff,
+		.flags	= IORESOURCE_MEM,
+	},
+};
+
+static struct alchemy_pci_platdata pb1500_pci_pd = {
+	.board_map_irq	= pb1500_map_pci_irq,
+	.pci_cfg_set	= PCI_CONFIG_AEN | PCI_CONFIG_R2H | PCI_CONFIG_R1H |
+			  PCI_CONFIG_CH |
+#if defined(__MIPSEB__)
+			  PCI_CONFIG_SIC_HWA_DAT | PCI_CONFIG_SM,
+#else
+			  0,
+#endif
+};
+
+static struct platform_device pb1500_pci_host = {
+	.dev.platform_data = &pb1500_pci_pd,
+	.name		= "alchemy-pci",
+	.id		= 0,
+	.num_resources	= ARRAY_SIZE(alchemy_pci_host_res),
+	.resource	= alchemy_pci_host_res,
+};
+
+static int __init pb1500_dev_init(void)
+{
+	int swapped;
+
+	irq_set_irq_type(AU1500_GPIO9_INT,   IRQF_TRIGGER_LOW);   /* CD0# */
+	irq_set_irq_type(AU1500_GPIO10_INT,  IRQF_TRIGGER_LOW);  /* CARD0 */
+	irq_set_irq_type(AU1500_GPIO11_INT,  IRQF_TRIGGER_LOW);  /* STSCHG0# */
 	irq_set_irq_type(AU1500_GPIO204_INT, IRQF_TRIGGER_HIGH);
 	irq_set_irq_type(AU1500_GPIO201_INT, IRQF_TRIGGER_LOW);
 	irq_set_irq_type(AU1500_GPIO202_INT, IRQF_TRIGGER_LOW);
 	irq_set_irq_type(AU1500_GPIO203_INT, IRQF_TRIGGER_LOW);
 	irq_set_irq_type(AU1500_GPIO205_INT, IRQF_TRIGGER_LOW);
 
+	/* PCMCIA. single socket, identical to Pb1100 */
+	db1x_register_pcmcia_socket(
+		AU1000_PCMCIA_ATTR_PHYS_ADDR,
+		AU1000_PCMCIA_ATTR_PHYS_ADDR + 0x000400000 - 1,
+		AU1000_PCMCIA_MEM_PHYS_ADDR,
+		AU1000_PCMCIA_MEM_PHYS_ADDR  + 0x000400000 - 1,
+		AU1000_PCMCIA_IO_PHYS_ADDR,
+		AU1000_PCMCIA_IO_PHYS_ADDR   + 0x000010000 - 1,
+		AU1500_GPIO11_INT, AU1500_GPIO9_INT,	 /* card / insert */
+		/*AU1500_GPIO10_INT*/0, 0, 0); /* stschg / eject / id */
+
+	swapped = bcsr_read(BCSR_STATUS) &  BCSR_STATUS_DB1000_SWAPBOOT;
+	db1x_register_norflash(64 * 1024 * 1024, 4, swapped);
+	platform_device_register(&pb1500_pci_host);
+
 	return 0;
 }
-arch_initcall(pb1500_init_irq);
+arch_initcall(pb1500_dev_init);

arch/mips/alchemy/devboards/pb1500/Makefile

@@ -1,8 +0,0 @@
-#
-#  Copyright 2000, 2001, 2008 MontaVista Software Inc.
-#  Author: MontaVista Software, Inc. <source@mvista.com>
-#
-# Makefile for the Alchemy Semiconductor Pb1500 board.
-#
-
-obj-y := board_setup.o platform.o

arch/mips/alchemy/devboards/pb1500/platform.c

@@ -1,94 +0,0 @@
-/*
- * Pb1500 board platform device registration
- *
- * Copyright (C) 2009 Manuel Lauss
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
- */
-
-#include <linux/dma-mapping.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <asm/mach-au1x00/au1000.h>
-#include <asm/mach-db1x00/bcsr.h>
-
-#include "../platform.h"
-
-static int pb1500_map_pci_irq(const struct pci_dev *d, u8 slot, u8 pin)
-{
-	if ((slot < 12) || (slot > 13) || pin == 0)
-		return -1;
-	if (slot == 12)
-		return (pin == 1) ? AU1500_PCI_INTA : 0xff;
-	if (slot == 13) {
-		switch (pin) {
-		case 1: return AU1500_PCI_INTA;
-		case 2: return AU1500_PCI_INTB;
-		case 3: return AU1500_PCI_INTC;
-		case 4: return AU1500_PCI_INTD;
-		}
-	}
-	return -1;
-}
-
-static struct resource alchemy_pci_host_res[] = {
-	[0] = {
-		.start	= AU1500_PCI_PHYS_ADDR,
-		.end	= AU1500_PCI_PHYS_ADDR + 0xfff,
-		.flags	= IORESOURCE_MEM,
-	},
-};
-
-static struct alchemy_pci_platdata pb1500_pci_pd = {
-	.board_map_irq	= pb1500_map_pci_irq,
-	.pci_cfg_set	= PCI_CONFIG_AEN | PCI_CONFIG_R2H | PCI_CONFIG_R1H |
-			  PCI_CONFIG_CH |
-#if defined(__MIPSEB__)
-			  PCI_CONFIG_SIC_HWA_DAT | PCI_CONFIG_SM,
-#else
-			  0,
-#endif
-};
-
-static struct platform_device pb1500_pci_host = {
-	.dev.platform_data = &pb1500_pci_pd,
-	.name		= "alchemy-pci",
-	.id		= 0,
-	.num_resources	= ARRAY_SIZE(alchemy_pci_host_res),
-	.resource	= alchemy_pci_host_res,
-};
-
-static int __init pb1500_dev_init(void)
-{
-	int swapped;
-
-	/* PCMCIA. single socket, identical to Pb1100 */
-	db1x_register_pcmcia_socket(
-		AU1000_PCMCIA_ATTR_PHYS_ADDR,
-		AU1000_PCMCIA_ATTR_PHYS_ADDR + 0x000400000 - 1,
-		AU1000_PCMCIA_MEM_PHYS_ADDR,
-		AU1000_PCMCIA_MEM_PHYS_ADDR  + 0x000400000 - 1,
-		AU1000_PCMCIA_IO_PHYS_ADDR,
-		AU1000_PCMCIA_IO_PHYS_ADDR   + 0x000010000 - 1,
-		AU1500_GPIO11_INT, AU1500_GPIO9_INT,	 /* card / insert */
-		/*AU1500_GPIO10_INT*/0, 0, 0); /* stschg / eject / id */
-
-	swapped = bcsr_read(BCSR_STATUS) &  BCSR_STATUS_DB1000_SWAPBOOT;
-	db1x_register_norflash(64 * 1024 * 1024, 4, swapped);
-	platform_device_register(&pb1500_pci_host);
-
-	return 0;
-}
-arch_initcall(pb1500_dev_init);

arch/mips/alchemy/devboards/pb1550/platform.c → arch/mips/alchemy/devboards/pb1550.c

@@ -1,7 +1,7 @@
 /*
- * Pb1550 board platform device registration
+ * Pb1550 board support.
  *
- * Copyright (C) 2009 Manuel Lauss
+ * Copyright (C) 2009-2011 Manuel Lauss
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
@@ -20,13 +20,44 @@
 
 #include <linux/dma-mapping.h>
 #include <linux/init.h>
+#include <linux/interrupt.h>
 #include <linux/platform_device.h>
 #include <asm/mach-au1x00/au1000.h>
 #include <asm/mach-au1x00/au1xxx_dbdma.h>
-#include <asm/mach-pb1x00/pb1550.h>
+#include <asm/mach-au1x00/au1550nd.h>
+#include <asm/mach-au1x00/gpio.h>
 #include <asm/mach-db1x00/bcsr.h>
+#include "platform.h"
 
-#include "../platform.h"
+const char *get_system_type(void)
+{
+	return "PB1550";
+}
+
+void __init board_setup(void)
+{
+	u32 pin_func;
+
+	bcsr_init(PB1550_BCSR_PHYS_ADDR,
+		  PB1550_BCSR_PHYS_ADDR + PB1550_BCSR_HEXLED_OFS);
+
+	alchemy_gpio2_enable();
+
+	/*
+	 * Enable PSC1 SYNC for AC'97.  Normaly done in audio driver,
+	 * but it is board specific code, so put it here.
+	 */
+	pin_func = au_readl(SYS_PINFUNC);
+	au_sync();
+	pin_func |= SYS_PF_MUST_BE_SET | SYS_PF_PSC1_S1;
+	au_writel(pin_func, SYS_PINFUNC);
+
+	bcsr_write(BCSR_PCMCIA, 0);	/* turn off PCMCIA power */
+
+	printk(KERN_INFO "AMD Alchemy Pb1550 Board\n");
+}
+
+/******************************************************************************/
 
 static int pb1550_map_pci_irq(const struct pci_dev *d, u8 slot, u8 pin)
 {
@@ -101,10 +132,79 @@ static struct platform_device pb1550_i2c_dev = {
 	.resource	= au1550_psc2_res,
 };
 
+static struct mtd_partition pb1550_nand_parts[] = {
+	[0] = {
+		.name	= "NAND FS 0",
+		.offset	= 0,
+		.size	= 8 * 1024 * 1024,
+	},
+	[1] = {
+		.name	= "NAND FS 1",
+		.offset	= MTDPART_OFS_APPEND,
+		.size	= MTDPART_SIZ_FULL,
+	},
+};
+
+static struct au1550nd_platdata pb1550_nand_pd = {
+	.parts		= pb1550_nand_parts,
+	.num_parts	= ARRAY_SIZE(pb1550_nand_parts),
+	.devwidth	= 0,	/* x8 NAND default, needs fixing up */
+};
+
+static struct resource pb1550_nand_res[] = {
+	[0] = {
+		.start	= 0x20000000,
+		.end	= 0x20000fff,
+		.flags	= IORESOURCE_MEM,
+	},
+};
+
+static struct platform_device pb1550_nand_dev = {
+	.name		= "au1550-nand",
+	.id		= -1,
+	.resource	= pb1550_nand_res,
+	.num_resources	= ARRAY_SIZE(pb1550_nand_res),
+	.dev		= {
+		.platform_data	= &pb1550_nand_pd,
+	},
+};
+
+static void __init pb1550_nand_setup(void)
+{
+	int boot_swapboot = (au_readl(MEM_STSTAT) & (0x7 << 1)) |
+			    ((bcsr_read(BCSR_STATUS) >> 6) & 0x1);
+
+	switch (boot_swapboot) {
+	case 0:
+	case 2:
+	case 8:
+	case 0xC:
+	case 0xD:
+		/* x16 NAND Flash */
+		pb1550_nand_pd.devwidth = 1;
+		/* fallthrough */
+	case 1:
+	case 9:
+	case 3:
+	case 0xE:
+	case 0xF:
+		/* x8 NAND, already set up */
+		platform_device_register(&pb1550_nand_dev);
+	}
+}
+
 static int __init pb1550_dev_init(void)
 {
 	int swapped;
 
+	irq_set_irq_type(AU1550_GPIO0_INT, IRQF_TRIGGER_LOW);
+	irq_set_irq_type(AU1550_GPIO1_INT, IRQF_TRIGGER_LOW);
+	irq_set_irq_type(AU1550_GPIO201_205_INT, IRQF_TRIGGER_HIGH);
+
+	/* enable both PCMCIA card irqs in the shared line */
+	alchemy_gpio2_enable_int(201);
+	alchemy_gpio2_enable_int(202);
+
 	/* Pb1550, like all others, also has statuschange irqs; however they're
 	* wired up on one of the Au1550's shared GPIO201_205 line, which also
 	* services the PCMCIA card interrupts.  So we ignore statuschange and
@@ -130,6 +230,10 @@ static int __init pb1550_dev_init(void)
 		AU1000_PCMCIA_IO_PHYS_ADDR   + 0x008010000 - 1,
 		AU1550_GPIO201_205_INT, AU1550_GPIO1_INT, 0, 0, 1);
 
+	/* NAND setup */
+	gpio_direction_input(206);	/* GPIO206 high */
+	pb1550_nand_setup();
+
 	swapped = bcsr_read(BCSR_STATUS) & BCSR_STATUS_PB1550_SWAPBOOT;
 	db1x_register_norflash(128 * 1024 * 1024, 4, swapped);
 	platform_device_register(&pb1550_pci_host);

arch/mips/alchemy/devboards/pb1550/Makefile

@@ -1,8 +0,0 @@
-#
-#  Copyright 2000, 2008 MontaVista Software Inc.
-#  Author: MontaVista Software, Inc. <source@mvista.com>
-#
-# Makefile for the Alchemy Semiconductor Pb1550 board.
-#
-
-obj-y := board_setup.o platform.o

arch/mips/alchemy/devboards/pb1550/board_setup.c

@@ -1,80 +0,0 @@
-/*
- *
- * BRIEF MODULE DESCRIPTION
- *	Alchemy Pb1550 board setup.
- *
- * Copyright 2000, 2008 MontaVista Software Inc.
- * Author: MontaVista Software, Inc. <source@mvista.com>
- *
- *  This program is free software; you can redistribute  it and/or modify it
- *  under  the terms of  the GNU General  Public License as published by the
- *  Free Software Foundation;  either version 2 of the  License, or (at your
- *  option) any later version.
- *
- *  THIS  SOFTWARE  IS PROVIDED   ``AS  IS'' AND   ANY  EXPRESS OR IMPLIED
- *  WARRANTIES,   INCLUDING, BUT NOT  LIMITED  TO, THE IMPLIED WARRANTIES OF
- *  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN
- *  NO  EVENT  SHALL   THE AUTHOR  BE    LIABLE FOR ANY   DIRECT, INDIRECT,
- *  INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- *  NOT LIMITED   TO, PROCUREMENT OF  SUBSTITUTE GOODS  OR SERVICES; LOSS OF
- *  USE, DATA,  OR PROFITS; OR  BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
- *  ANY THEORY OF LIABILITY, WHETHER IN  CONTRACT, STRICT LIABILITY, OR TORT
- *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
- *  THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- *  You should have received a copy of the  GNU General Public License along
- *  with this program; if not, write  to the Free Software Foundation, Inc.,
- *  675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#include <linux/init.h>
-#include <linux/interrupt.h>
-
-#include <asm/mach-au1x00/au1000.h>
-#include <asm/mach-pb1x00/pb1550.h>
-#include <asm/mach-db1x00/bcsr.h>
-#include <asm/mach-au1x00/gpio.h>
-
-#include <prom.h>
-
-const char *get_system_type(void)
-{
-	return "Alchemy Pb1550";
-}
-
-void __init board_setup(void)
-{
-	u32 pin_func;
-
-	bcsr_init(PB1550_BCSR_PHYS_ADDR,
-		  PB1550_BCSR_PHYS_ADDR + PB1550_BCSR_HEXLED_OFS);
-
-	alchemy_gpio2_enable();
-
-	/*
-	 * Enable PSC1 SYNC for AC'97.  Normaly done in audio driver,
-	 * but it is board specific code, so put it here.
-	 */
-	pin_func = au_readl(SYS_PINFUNC);
-	au_sync();
-	pin_func |= SYS_PF_MUST_BE_SET | SYS_PF_PSC1_S1;
-	au_writel(pin_func, SYS_PINFUNC);
-
-	bcsr_write(BCSR_PCMCIA, 0);	/* turn off PCMCIA power */
-
-	printk(KERN_INFO "AMD Alchemy Pb1550 Board\n");
-}
-
-static int __init pb1550_init_irq(void)
-{
-	irq_set_irq_type(AU1550_GPIO0_INT, IRQF_TRIGGER_LOW);
-	irq_set_irq_type(AU1550_GPIO1_INT, IRQF_TRIGGER_LOW);
-	irq_set_irq_type(AU1550_GPIO201_205_INT, IRQF_TRIGGER_HIGH);
-
-	/* enable both PCMCIA card irqs in the shared line */
-	alchemy_gpio2_enable_int(201);
-	alchemy_gpio2_enable_int(202);
-
-	return 0;
-}
-arch_initcall(pb1550_init_irq);

arch/mips/alchemy/devboards/platform.c

@@ -13,6 +13,13 @@
 #include <asm/reboot.h>
 #include <asm/mach-db1x00/bcsr.h>
 
+
+static struct platform_device db1x00_rtc_dev = {
+	.name	= "rtc-au1xxx",
+	.id	= -1,
+};
+
+
 static void db1x_power_off(void)
 {
 	bcsr_write(BCSR_RESETS, 0);
@@ -25,7 +32,7 @@ static void db1x_reset(char *c)
 	bcsr_write(BCSR_SYSTEM, 0);
 }
 
-static int __init db1x_poweroff_setup(void)
+static int __init db1x_late_setup(void)
 {
 	if (!pm_power_off)
 		pm_power_off = db1x_power_off;
@@ -34,9 +41,11 @@ static int __init db1x_poweroff_setup(void)
 	if (!_machine_restart)
 		_machine_restart = db1x_reset;
 
+	platform_device_register(&db1x00_rtc_dev);
+
 	return 0;
 }
-late_initcall(db1x_poweroff_setup);
+device_initcall(db1x_late_setup);
 
 /* register a pcmcia socket */
 int __init db1x_register_pcmcia_socket(phys_addr_t pcmcia_attr_start,

arch/mips/alchemy/devboards/prom.c

@@ -33,10 +33,9 @@
 #include <asm/mach-au1x00/au1000.h>
 #include <prom.h>
 
-#if defined(CONFIG_MIPS_PB1000) || defined(CONFIG_MIPS_DB1000) || \
-    defined(CONFIG_MIPS_PB1100) || defined(CONFIG_MIPS_DB1100) || \
-    defined(CONFIG_MIPS_PB1500) || defined(CONFIG_MIPS_DB1500) || \
-    defined(CONFIG_MIPS_BOSPORUS) || defined(CONFIG_MIPS_MIRAGE)
+#if defined(CONFIG_MIPS_DB1000) || \
+    defined(CONFIG_MIPS_PB1100) || \
+    defined(CONFIG_MIPS_PB1500)
 #define ALCHEMY_BOARD_DEFAULT_MEMSIZE	0x04000000
 
 #else	/* Au1550/Au1200-based develboards */
@@ -62,5 +61,9 @@ void __init prom_init(void)
 
 void prom_putchar(unsigned char c)
 {
+#ifdef CONFIG_MIPS_DB1300
+	alchemy_uart_putchar(AU1300_UART2_PHYS_ADDR, c);
+#else
 	alchemy_uart_putchar(AU1000_UART0_PHYS_ADDR, c);
+#endif
 }

arch/mips/alchemy/gpr/Makefile

@@ -1,8 +0,0 @@
-#
-#  Copyright 2003 MontaVista Software Inc.
-#  Author: MontaVista Software, Inc. <source@mvista.com>
-#
-# Makefile for Trapeze ITS GPR board.
-#
-
-obj-y += board_setup.o init.o platform.o

arch/mips/alchemy/gpr/board_setup.c

@@ -1,75 +0,0 @@
-/*
- * Copyright 2010 Wolfgang Grandegger <wg@denx.de>
- *
- * Copyright 2000-2003, 2008 MontaVista Software Inc.
- * Author: MontaVista Software, Inc. <source@mvista.com>
- *
- *  This program is free software; you can redistribute  it and/or modify it
- *  under  the terms of  the GNU General  Public License as published by the
- *  Free Software Foundation;  either version 2 of the  License, or (at your
- *  option) any later version.
- *
- *  THIS  SOFTWARE  IS PROVIDED   ``AS  IS'' AND   ANY  EXPRESS OR IMPLIED
- *  WARRANTIES,   INCLUDING, BUT NOT  LIMITED  TO, THE IMPLIED WARRANTIES OF
- *  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN
- *  NO  EVENT  SHALL   THE AUTHOR  BE    LIABLE FOR ANY   DIRECT, INDIRECT,
- *  INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- *  NOT LIMITED   TO, PROCUREMENT OF  SUBSTITUTE GOODS  OR SERVICES; LOSS OF
- *  USE, DATA,  OR PROFITS; OR  BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
- *  ANY THEORY OF LIABILITY, WHETHER IN  CONTRACT, STRICT LIABILITY, OR TORT
- *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
- *  THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- *  You should have received a copy of the  GNU General Public License along
- *  with this program; if not, write  to the Free Software Foundation, Inc.,
- *  675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#include <linux/gpio.h>
-#include <linux/init.h>
-#include <linux/interrupt.h>
-#include <linux/delay.h>
-#include <linux/pm.h>
-
-#include <asm/reboot.h>
-#include <asm/mach-au1x00/au1000.h>
-
-#include <prom.h>
-
-static void gpr_reset(char *c)
-{
-	/* switch System-LED to orange (red# and green# on) */
-	alchemy_gpio_direction_output(4, 0);
-	alchemy_gpio_direction_output(5, 0);
-
-	/* trigger watchdog to reset board in 200ms */
-	printk(KERN_EMERG "Triggering watchdog soft reset...\n");
-	raw_local_irq_disable();
-	alchemy_gpio_direction_output(1, 0);
-	udelay(1);
-	alchemy_gpio_set_value(1, 1);
-	while (1)
-		cpu_wait();
-}
-
-static void gpr_power_off(void)
-{
-	while (1)
-		cpu_wait();
-}
-
-void __init board_setup(void)
-{
-	printk(KERN_INFO "Trapeze ITS GPR board\n");
-
-	pm_power_off = gpr_power_off;
-	_machine_halt = gpr_power_off;
-	_machine_restart = gpr_reset;
-
-	/* Enable UART1/3 */
-	alchemy_uart_enable(AU1000_UART3_PHYS_ADDR);
-	alchemy_uart_enable(AU1000_UART1_PHYS_ADDR);
-
-	/* Take away Reset of UMTS-card */
-	alchemy_gpio_direction_output(215, 1);
-}

arch/mips/alchemy/gpr/init.c

@@ -1,63 +0,0 @@
-/*
- * Copyright 2010 Wolfgang Grandegger <wg@denx.de>
- *
- * Copyright 2003, 2008 MontaVista Software Inc.
- * Author: MontaVista Software, Inc. <source@mvista.com>
- *
- *  This program is free software; you can redistribute  it and/or modify it
- *  under  the terms of  the GNU General  Public License as published by the
- *  Free Software Foundation;  either version 2 of the  License, or (at your
- *  option) any later version.
- *
- *  THIS  SOFTWARE  IS PROVIDED   ``AS  IS'' AND   ANY  EXPRESS OR IMPLIED
- *  WARRANTIES,   INCLUDING, BUT NOT  LIMITED  TO, THE IMPLIED WARRANTIES OF
- *  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN
- *  NO  EVENT  SHALL   THE AUTHOR  BE    LIABLE FOR ANY   DIRECT, INDIRECT,
- *  INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- *  NOT LIMITED   TO, PROCUREMENT OF  SUBSTITUTE GOODS  OR SERVICES; LOSS OF
- *  USE, DATA,  OR PROFITS; OR  BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
- *  ANY THEORY OF LIABILITY, WHETHER IN  CONTRACT, STRICT LIABILITY, OR TORT
- *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
- *  THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- *  You should have received a copy of the  GNU General Public License along
- *  with this program; if not, write  to the Free Software Foundation, Inc.,
- *  675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#include <linux/init.h>
-#include <linux/kernel.h>
-
-#include <asm/bootinfo.h>
-#include <asm/mach-au1x00/au1000.h>
-
-#include <prom.h>
-
-const char *get_system_type(void)
-{
-	return "GPR";
-}
-
-void __init prom_init(void)
-{
-	unsigned char *memsize_str;
-	unsigned long memsize;
-
-	prom_argc = fw_arg0;
-	prom_argv = (char **)fw_arg1;
-	prom_envp = (char **)fw_arg2;
-
-	prom_init_cmdline();
-
-	memsize_str = prom_getenv("memsize");
-	if (!memsize_str)
-		memsize = 0x04000000;
-	else
-		strict_strtoul(memsize_str, 0, &memsize);
-	add_memory_region(0, memsize, BOOT_MEM_RAM);
-}
-
-void prom_putchar(unsigned char c)
-{
-	alchemy_uart_putchar(AU1000_UART0_PHYS_ADDR, c);
-}

arch/mips/alchemy/mtx-1/Makefile

@@ -1,9 +0,0 @@
-#
-#  Copyright 2003 MontaVista Software Inc.
-#  Author: MontaVista Software, Inc. <source@mvista.com>
-#       Bruno Randolf <bruno.randolf@4g-systems.biz>
-#
-# Makefile for 4G Systems MTX-1 board.
-#
-
-obj-y += init.o board_setup.o platform.o

arch/mips/alchemy/mtx-1/board_setup.c

@@ -1,94 +0,0 @@
-/*
- *
- * BRIEF MODULE DESCRIPTION
- *	4G Systems MTX-1 board setup.
- *
- * Copyright 2003, 2008 MontaVista Software Inc.
- * Author: MontaVista Software, Inc. <source@mvista.com>
- *         Bruno Randolf <bruno.randolf@4g-systems.biz>
- *
- *  This program is free software; you can redistribute  it and/or modify it
- *  under  the terms of  the GNU General  Public License as published by the
- *  Free Software Foundation;  either version 2 of the  License, or (at your
- *  option) any later version.
- *
- *  THIS  SOFTWARE  IS PROVIDED   ``AS  IS'' AND   ANY  EXPRESS OR IMPLIED
- *  WARRANTIES,   INCLUDING, BUT NOT  LIMITED  TO, THE IMPLIED WARRANTIES OF
- *  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN
- *  NO  EVENT  SHALL   THE AUTHOR  BE    LIABLE FOR ANY   DIRECT, INDIRECT,
- *  INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- *  NOT LIMITED   TO, PROCUREMENT OF  SUBSTITUTE GOODS  OR SERVICES; LOSS OF
- *  USE, DATA,  OR PROFITS; OR  BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
- *  ANY THEORY OF LIABILITY, WHETHER IN  CONTRACT, STRICT LIABILITY, OR TORT
- *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
- *  THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- *  You should have received a copy of the  GNU General Public License along
- *  with this program; if not, write  to the Free Software Foundation, Inc.,
- *  675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#include <linux/gpio.h>
-#include <linux/init.h>
-#include <linux/interrupt.h>
-#include <linux/pm.h>
-
-#include <asm/reboot.h>
-#include <asm/mach-au1x00/au1000.h>
-
-#include <prom.h>
-
-static void mtx1_reset(char *c)
-{
-	/* Jump to the reset vector */
-	__asm__ __volatile__("jr\t%0"::"r"(0xbfc00000));
-}
-
-static void mtx1_power_off(void)
-{
-	while (1)
-		asm volatile (
-		"	.set	mips32					\n"
-		"	wait						\n"
-		"	.set	mips0					\n");
-}
-
-void __init board_setup(void)
-{
-#if defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE)
-	/* Enable USB power switch */
-	alchemy_gpio_direction_output(204, 0);
-#endif /* defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE) */
-
-	/* Initialize sys_pinfunc */
-	au_writel(SYS_PF_NI2, SYS_PINFUNC);
-
-	/* Initialize GPIO */
-	au_writel(~0, KSEG1ADDR(AU1000_SYS_PHYS_ADDR) + SYS_TRIOUTCLR);
-	alchemy_gpio_direction_output(0, 0);	/* Disable M66EN (PCI 66MHz) */
-	alchemy_gpio_direction_output(3, 1);	/* Disable PCI CLKRUN# */
-	alchemy_gpio_direction_output(1, 1);	/* Enable EXT_IO3 */
-	alchemy_gpio_direction_output(5, 0);	/* Disable eth PHY TX_ER */
-
-	/* Enable LED and set it to green */
-	alchemy_gpio_direction_output(211, 1);	/* green on */
-	alchemy_gpio_direction_output(212, 0);	/* red off */
-
-	pm_power_off = mtx1_power_off;
-	_machine_halt = mtx1_power_off;
-	_machine_restart = mtx1_reset;
-
-	printk(KERN_INFO "4G Systems MTX-1 Board\n");
-}
-
-static int __init mtx1_init_irq(void)
-{
-	irq_set_irq_type(AU1500_GPIO204_INT, IRQF_TRIGGER_HIGH);
-	irq_set_irq_type(AU1500_GPIO201_INT, IRQF_TRIGGER_LOW);
-	irq_set_irq_type(AU1500_GPIO202_INT, IRQF_TRIGGER_LOW);
-	irq_set_irq_type(AU1500_GPIO203_INT, IRQF_TRIGGER_LOW);
-	irq_set_irq_type(AU1500_GPIO205_INT, IRQF_TRIGGER_LOW);
-
-	return 0;
-}
-arch_initcall(mtx1_init_irq);

arch/mips/alchemy/mtx-1/init.c

@@ -1,66 +0,0 @@
-/*
- *
- * BRIEF MODULE DESCRIPTION
- *	4G Systems MTX-1 board setup
- *
- * Copyright 2003, 2008 MontaVista Software Inc.
- * Author: MontaVista Software, Inc. <source@mvista.com>
- *         Bruno Randolf <bruno.randolf@4g-systems.biz>
- *
- *  This program is free software; you can redistribute  it and/or modify it
- *  under  the terms of  the GNU General  Public License as published by the
- *  Free Software Foundation;  either version 2 of the  License, or (at your
- *  option) any later version.
- *
- *  THIS  SOFTWARE  IS PROVIDED   ``AS  IS'' AND   ANY  EXPRESS OR IMPLIED
- *  WARRANTIES,   INCLUDING, BUT NOT  LIMITED  TO, THE IMPLIED WARRANTIES OF
- *  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN
- *  NO  EVENT  SHALL   THE AUTHOR  BE    LIABLE FOR ANY   DIRECT, INDIRECT,
- *  INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- *  NOT LIMITED   TO, PROCUREMENT OF  SUBSTITUTE GOODS  OR SERVICES; LOSS OF
- *  USE, DATA,  OR PROFITS; OR  BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
- *  ANY THEORY OF LIABILITY, WHETHER IN  CONTRACT, STRICT LIABILITY, OR TORT
- *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
- *  THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- *  You should have received a copy of the  GNU General Public License along
- *  with this program; if not, write  to the Free Software Foundation, Inc.,
- *  675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-
-#include <asm/bootinfo.h>
-#include <asm/mach-au1x00/au1000.h>
-
-#include <prom.h>
-
-const char *get_system_type(void)
-{
-	return "MTX-1";
-}
-
-void __init prom_init(void)
-{
-	unsigned char *memsize_str;
-	unsigned long memsize;
-
-	prom_argc = fw_arg0;
-	prom_argv = (char **)fw_arg1;
-	prom_envp = (char **)fw_arg2;
-
-	prom_init_cmdline();
-
-	memsize_str = prom_getenv("memsize");
-	if (!memsize_str)
-		memsize = 0x04000000;
-	else
-		strict_strtoul(memsize_str, 0, &memsize);
-	add_memory_region(0, memsize, BOOT_MEM_RAM);
-}
-
-void prom_putchar(unsigned char c)
-{
-	alchemy_uart_putchar(AU1000_UART0_PHYS_ADDR, c);
-}

arch/mips/alchemy/xxs1500/Makefile

@@ -1,8 +0,0 @@
-#
-#  Copyright 2003 MontaVista Software Inc.
-#  Author: MontaVista Software, Inc. <source@mvista.com>
-#
-# Makefile for MyCable XXS1500 board.
-#
-
-obj-y += init.o board_setup.o platform.o

arch/mips/alchemy/xxs1500/board_setup.c

@@ -1,93 +0,0 @@
-/*
- * Copyright 2000-2003, 2008 MontaVista Software Inc.
- * Author: MontaVista Software, Inc. <source@mvista.com>
- *
- *  This program is free software; you can redistribute  it and/or modify it
- *  under  the terms of  the GNU General  Public License as published by the
- *  Free Software Foundation;  either version 2 of the  License, or (at your
- *  option) any later version.
- *
- *  THIS  SOFTWARE  IS PROVIDED   ``AS  IS'' AND   ANY  EXPRESS OR IMPLIED
- *  WARRANTIES,   INCLUDING, BUT NOT  LIMITED  TO, THE IMPLIED WARRANTIES OF
- *  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN
- *  NO  EVENT  SHALL   THE AUTHOR  BE    LIABLE FOR ANY   DIRECT, INDIRECT,
- *  INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- *  NOT LIMITED   TO, PROCUREMENT OF  SUBSTITUTE GOODS  OR SERVICES; LOSS OF
- *  USE, DATA,  OR PROFITS; OR  BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
- *  ANY THEORY OF LIABILITY, WHETHER IN  CONTRACT, STRICT LIABILITY, OR TORT
- *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
- *  THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- *  You should have received a copy of the  GNU General Public License along
- *  with this program; if not, write  to the Free Software Foundation, Inc.,
- *  675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#include <linux/gpio.h>
-#include <linux/init.h>
-#include <linux/interrupt.h>
-#include <linux/delay.h>
-#include <linux/pm.h>
-
-#include <asm/reboot.h>
-#include <asm/mach-au1x00/au1000.h>
-
-#include <prom.h>
-
-static void xxs1500_reset(char *c)
-{
-	/* Jump to the reset vector */
-	__asm__ __volatile__("jr\t%0"::"r"(0xbfc00000));
-}
-
-static void xxs1500_power_off(void)
-{
-	while (1)
-		asm volatile (
-		"	.set	mips32					\n"
-		"	wait						\n"
-		"	.set	mips0					\n");
-}
-
-void __init board_setup(void)
-{
-	u32 pin_func;
-
-	pm_power_off = xxs1500_power_off;
-	_machine_halt = xxs1500_power_off;
-	_machine_restart = xxs1500_reset;
-
-	alchemy_gpio1_input_enable();
-	alchemy_gpio2_enable();
-
-	/* Set multiple use pins (UART3/GPIO) to UART (it's used as UART too) */
-	pin_func  = au_readl(SYS_PINFUNC) & ~SYS_PF_UR3;
-	pin_func |= SYS_PF_UR3;
-	au_writel(pin_func, SYS_PINFUNC);
-
-	/* Enable UART */
-	alchemy_uart_enable(AU1000_UART3_PHYS_ADDR);
-	/* Enable DTR (MCR bit 0) = USB power up */
-	__raw_writel(1, (void __iomem *)KSEG1ADDR(AU1000_UART3_PHYS_ADDR + 0x18));
-	wmb();
-}
-
-static int __init xxs1500_init_irq(void)
-{
-	irq_set_irq_type(AU1500_GPIO204_INT, IRQF_TRIGGER_HIGH);
-	irq_set_irq_type(AU1500_GPIO201_INT, IRQF_TRIGGER_LOW);
-	irq_set_irq_type(AU1500_GPIO202_INT, IRQF_TRIGGER_LOW);
-	irq_set_irq_type(AU1500_GPIO203_INT, IRQF_TRIGGER_LOW);
-	irq_set_irq_type(AU1500_GPIO205_INT, IRQF_TRIGGER_LOW);
-	irq_set_irq_type(AU1500_GPIO207_INT, IRQF_TRIGGER_LOW);
-
-	irq_set_irq_type(AU1500_GPIO0_INT, IRQF_TRIGGER_LOW);
-	irq_set_irq_type(AU1500_GPIO1_INT, IRQF_TRIGGER_LOW);
-	irq_set_irq_type(AU1500_GPIO2_INT, IRQF_TRIGGER_LOW);
-	irq_set_irq_type(AU1500_GPIO3_INT, IRQF_TRIGGER_LOW);
-	irq_set_irq_type(AU1500_GPIO4_INT, IRQF_TRIGGER_LOW); /* CF irq */
-	irq_set_irq_type(AU1500_GPIO5_INT, IRQF_TRIGGER_LOW);
-
-	return 0;
-}
-arch_initcall(xxs1500_init_irq);

arch/mips/alchemy/xxs1500/init.c

@@ -1,63 +0,0 @@
-/*
- * BRIEF MODULE DESCRIPTION
- *	XXS1500 board setup
- *
- * Copyright 2003, 2008 MontaVista Software Inc.
- * Author: MontaVista Software, Inc. <source@mvista.com>
- *
- *  This program is free software; you can redistribute  it and/or modify it
- *  under  the terms of  the GNU General  Public License as published by the
- *  Free Software Foundation;  either version 2 of the  License, or (at your
- *  option) any later version.
- *
- *  THIS  SOFTWARE  IS PROVIDED   ``AS  IS'' AND   ANY  EXPRESS OR IMPLIED
- *  WARRANTIES,   INCLUDING, BUT NOT  LIMITED  TO, THE IMPLIED WARRANTIES OF
- *  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN
- *  NO  EVENT  SHALL   THE AUTHOR  BE    LIABLE FOR ANY   DIRECT, INDIRECT,
- *  INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- *  NOT LIMITED   TO, PROCUREMENT OF  SUBSTITUTE GOODS  OR SERVICES; LOSS OF
- *  USE, DATA,  OR PROFITS; OR  BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
- *  ANY THEORY OF LIABILITY, WHETHER IN  CONTRACT, STRICT LIABILITY, OR TORT
- *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
- *  THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- *  You should have received a copy of the  GNU General Public License along
- *  with this program; if not, write  to the Free Software Foundation, Inc.,
- *  675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#include <linux/init.h>
-#include <linux/kernel.h>
-
-#include <asm/bootinfo.h>
-#include <asm/mach-au1x00/au1000.h>
-
-#include <prom.h>
-
-const char *get_system_type(void)
-{
-	return "XXS1500";
-}
-
-void __init prom_init(void)
-{
-	unsigned char *memsize_str;
-	unsigned long memsize;
-
-	prom_argc = fw_arg0;
-	prom_argv = (char **)fw_arg1;
-	prom_envp = (char **)fw_arg2;
-
-	prom_init_cmdline();
-
-	memsize_str = prom_getenv("memsize");
-	if (!memsize_str || strict_strtoul(memsize_str, 0, &memsize))
-		memsize = 0x04000000;
-
-	add_memory_region(0, memsize, BOOT_MEM_RAM);
-}
-
-void prom_putchar(unsigned char c)
-{
-	alchemy_uart_putchar(AU1000_UART0_PHYS_ADDR, c);
-}

arch/mips/alchemy/xxs1500/platform.c

@@ -1,63 +0,0 @@
-/*
- * XXS1500 board platform device registration
- *
- * Copyright (C) 2009 Manuel Lauss
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
- */
-
-#include <linux/init.h>
-#include <linux/platform_device.h>
-
-#include <asm/mach-au1x00/au1000.h>
-
-static struct resource xxs1500_pcmcia_res[] = {
-	{
-		.name	= "pcmcia-io",
-		.flags	= IORESOURCE_MEM,
-		.start	= AU1000_PCMCIA_IO_PHYS_ADDR,
-		.end	= AU1000_PCMCIA_IO_PHYS_ADDR + 0x000400000 - 1,
-	},
-	{
-		.name	= "pcmcia-attr",
-		.flags	= IORESOURCE_MEM,
-		.start	= AU1000_PCMCIA_ATTR_PHYS_ADDR,
-		.end	= AU1000_PCMCIA_ATTR_PHYS_ADDR + 0x000400000 - 1,
-	},
-	{
-		.name	= "pcmcia-mem",
-		.flags	= IORESOURCE_MEM,
-		.start	= AU1000_PCMCIA_MEM_PHYS_ADDR,
-		.end	= AU1000_PCMCIA_MEM_PHYS_ADDR + 0x000400000 - 1,
-	},
-};
-
-static struct platform_device xxs1500_pcmcia_dev = {
-	.name		= "xxs1500_pcmcia",
-	.id		= -1,
-	.num_resources	= ARRAY_SIZE(xxs1500_pcmcia_res),
-	.resource	= xxs1500_pcmcia_res,
-};
-
-static struct platform_device *xxs1500_devs[] __initdata = {
-	&xxs1500_pcmcia_dev,
-};
-
-static int __init xxs1500_dev_init(void)
-{
-	return platform_add_devices(xxs1500_devs,
-				    ARRAY_SIZE(xxs1500_devs));
-}
-device_initcall(xxs1500_dev_init);

arch/mips/boot/compressed/uart-alchemy.c

@@ -2,6 +2,9 @@
 
 void putc(char c)
 {
-	/* all current (Jan. 2010) in-kernel boards */
+#ifdef CONFIG_MIPS_DB1300
+	alchemy_uart_putchar(AU1300_UART2_PHYS_ADDR, c);
+#else
 	alchemy_uart_putchar(AU1000_UART0_PHYS_ADDR, c);
+#endif
 }

arch/mips/configs/db1000_defconfig

@@ -1,118 +1,359 @@
+CONFIG_MIPS=y
 CONFIG_MIPS_ALCHEMY=y
+CONFIG_MIPS_DB1000=y
+CONFIG_SCHED_OMIT_FRAME_POINTER=y
+CONFIG_TICK_ONESHOT=y
 CONFIG_NO_HZ=y
 CONFIG_HIGH_RES_TIMERS=y
 CONFIG_HZ_100=y
-# CONFIG_SECCOMP is not set
+CONFIG_HZ=100
+CONFIG_PREEMPT_NONE=y
 CONFIG_EXPERIMENTAL=y
-CONFIG_LOCALVERSION="-db1000"
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_CROSS_COMPILE=""
+CONFIG_LOCALVERSION="-db1x00"
+CONFIG_LOCALVERSION_AUTO=y
 CONFIG_KERNEL_LZMA=y
+CONFIG_DEFAULT_HOSTNAME="db1x00"
+CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
-CONFIG_POSIX_MQUEUE=y
+CONFIG_SYSVIPC_SYSCTL=y
+CONFIG_FHANDLE=y
+CONFIG_AUDIT=y
 CONFIG_TINY_RCU=y
-CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+CONFIG_LOG_BUF_SHIFT=18
+CONFIG_NAMESPACES=y
+CONFIG_UTS_NS=y
+CONFIG_IPC_NS=y
+CONFIG_USER_NS=y
+CONFIG_PID_NS=y
+CONFIG_NET_NS=y
+CONFIG_SYSCTL=y
 CONFIG_EXPERT=y
-# CONFIG_KALLSYMS is not set
-# CONFIG_PCSPKR_PLATFORM is not set
-# CONFIG_VM_EVENT_COUNTERS is not set
-# CONFIG_COMPAT_BRK is not set
+CONFIG_KALLSYMS=y
+CONFIG_KALLSYMS_ALL=y
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_AIO=y
+CONFIG_EMBEDDED=y
+CONFIG_HAVE_PERF_EVENTS=y
+CONFIG_PERF_USE_VMALLOC=y
+CONFIG_PCI_QUIRKS=y
 CONFIG_SLAB=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-# CONFIG_LBDAF is not set
-# CONFIG_BLK_DEV_BSG is not set
-# CONFIG_IOSCHED_DEADLINE is not set
-# CONFIG_IOSCHED_CFQ is not set
+CONFIG_SLABINFO=y
+CONFIG_BLOCK=y
+CONFIG_LBDAF=y
+CONFIG_BLK_DEV_BSG=y
+CONFIG_BLK_DEV_BSGLIB=y
+CONFIG_IOSCHED_NOOP=y
+CONFIG_DEFAULT_NOOP=y
+CONFIG_DEFAULT_IOSCHED="noop"
+CONFIG_FREEZER=y
+CONFIG_PCI=y
+CONFIG_PCI_DOMAINS=y
 CONFIG_PCCARD=y
+CONFIG_PCMCIA=y
+CONFIG_PCMCIA_LOAD_CIS=y
 CONFIG_PCMCIA_ALCHEMY_DEVBOARD=y
-CONFIG_PM=y
+CONFIG_BINFMT_ELF=y
+CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS=y
+CONFIG_SUSPEND=y
+CONFIG_SUSPEND_FREEZER=y
+CONFIG_PM_SLEEP=y
 CONFIG_PM_RUNTIME=y
+CONFIG_PM=y
 CONFIG_NET=y
 CONFIG_PACKET=y
 CONFIG_UNIX=y
+CONFIG_XFRM=y
 CONFIG_INET=y
 CONFIG_IP_MULTICAST=y
 CONFIG_IP_PNP=y
 CONFIG_IP_PNP_DHCP=y
 CONFIG_IP_PNP_BOOTP=y
 CONFIG_IP_PNP_RARP=y
-# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
-# CONFIG_INET_XFRM_MODE_TUNNEL is not set
-# CONFIG_INET_XFRM_MODE_BEET is not set
-# CONFIG_INET_DIAG is not set
-# CONFIG_IPV6 is not set
-# CONFIG_WIRELESS is not set
-CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_NET_IPIP=y
+CONFIG_INET_TUNNEL=y
+CONFIG_INET_LRO=y
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+CONFIG_IPV6=y
+CONFIG_INET6_XFRM_MODE_TRANSPORT=y
+CONFIG_INET6_XFRM_MODE_TUNNEL=y
+CONFIG_INET6_XFRM_MODE_BEET=y
+CONFIG_IPV6_SIT=y
+CONFIG_IPV6_NDISC_NODETYPE=y
+CONFIG_STP=y
+CONFIG_GARP=y
+CONFIG_BRIDGE=y
+CONFIG_BRIDGE_IGMP_SNOOPING=y
+CONFIG_VLAN_8021Q=y
+CONFIG_VLAN_8021Q_GVRP=y
+CONFIG_LLC=y
+CONFIG_LLC2=y
+CONFIG_DNS_RESOLVER=y
+CONFIG_BT=y
+CONFIG_BT_L2CAP=y
+CONFIG_BT_SCO=y
+CONFIG_BT_RFCOMM=y
+CONFIG_BT_RFCOMM_TTY=y
+CONFIG_BT_BNEP=y
+CONFIG_BT_BNEP_MC_FILTER=y
+CONFIG_BT_BNEP_PROTO_FILTER=y
+CONFIG_BT_HIDP=y
+CONFIG_BT_HCIBTUSB=y
+CONFIG_UEVENT_HELPER_PATH=""
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+CONFIG_FW_LOADER=y
 CONFIG_MTD=y
-CONFIG_MTD_PARTITIONS=y
 CONFIG_MTD_CMDLINE_PARTS=y
 CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLKDEVS=y
 CONFIG_MTD_BLOCK=y
 CONFIG_MTD_CFI=y
+CONFIG_MTD_GEN_PROBE=y
+CONFIG_MTD_CFI_ADV_OPTIONS=y
+CONFIG_MTD_CFI_NOSWAP=y
+CONFIG_MTD_CFI_GEOMETRY=y
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+CONFIG_MTD_CFI_I4=y
+CONFIG_MTD_CFI_I8=y
+CONFIG_MTD_CFI_INTELEXT=y
 CONFIG_MTD_CFI_AMDSTD=y
+CONFIG_MTD_CFI_UTIL=y
 CONFIG_MTD_PHYSMAP=y
-# CONFIG_MISC_DEVICES is not set
+CONFIG_SCSI_MOD=y
+CONFIG_SCSI=y
+CONFIG_SCSI_DMA=y
+CONFIG_SCSI_PROC_FS=y
+CONFIG_BLK_DEV_SD=y
+CONFIG_CHR_DEV_SG=y
+CONFIG_SCSI_MULTI_LUN=y
+CONFIG_SCSI_CONSTANTS=y
+CONFIG_ATA=y
+CONFIG_ATA_VERBOSE_ERROR=y
+CONFIG_ATA_SFF=y
+CONFIG_ATA_BMDMA=y
+CONFIG_PATA_HPT37X=y
+CONFIG_PATA_PCMCIA=y
+CONFIG_MD=y
+CONFIG_BLK_DEV_DM=y
+CONFIG_FIREWIRE=y
+CONFIG_FIREWIRE_OHCI=y
+CONFIG_FIREWIRE_OHCI_DEBUG=y
+CONFIG_FIREWIRE_NET=y
 CONFIG_NETDEVICES=y
-CONFIG_MARVELL_PHY=y
-CONFIG_DAVICOM_PHY=y
-CONFIG_QSEMI_PHY=y
-CONFIG_LXT_PHY=y
-CONFIG_CICADA_PHY=y
-CONFIG_VITESSE_PHY=y
-CONFIG_SMSC_PHY=y
-CONFIG_BROADCOM_PHY=y
-CONFIG_ICPLUS_PHY=y
-CONFIG_REALTEK_PHY=y
-CONFIG_NATIONAL_PHY=y
-CONFIG_STE10XP=y
-CONFIG_LSI_ET1011C_PHY=y
-CONFIG_NET_ETHERNET=y
 CONFIG_MII=y
+CONFIG_PHYLIB=y
+CONFIG_NET_ETHERNET=y
 CONFIG_MIPS_AU1X00_ENET=y
-# CONFIG_NETDEV_1000 is not set
-# CONFIG_NETDEV_10000 is not set
-# CONFIG_WLAN is not set
-# CONFIG_INPUT_MOUSEDEV is not set
+CONFIG_NET_PCMCIA=y
+CONFIG_PCMCIA_3C589=y
+CONFIG_PCMCIA_PCNET=y
+CONFIG_PPP=y
+CONFIG_PPP_MULTILINK=y
+CONFIG_PPP_FILTER=y
+CONFIG_PPP_ASYNC=y
+CONFIG_PPP_SYNC_TTY=y
+CONFIG_PPP_DEFLATE=y
+CONFIG_PPP_BSDCOMP=y
+CONFIG_PPP_MPPE=y
+CONFIG_PPPOE=y
+CONFIG_INPUT=y
 CONFIG_INPUT_EVDEV=y
-# CONFIG_INPUT_KEYBOARD is not set
-# CONFIG_INPUT_MOUSE is not set
-# CONFIG_SERIO is not set
+CONFIG_INPUT_MISC=y
+CONFIG_INPUT_UINPUT=y
+CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+CONFIG_UNIX98_PTYS=y
+CONFIG_DEVPTS_MULTIPLE_INSTANCES=y
+CONFIG_DEVKMEM=y
 CONFIG_SERIAL_8250=y
 CONFIG_SERIAL_8250_CONSOLE=y
-# CONFIG_LEGACY_PTYS is not set
-# CONFIG_HW_RANDOM is not set
-# CONFIG_HWMON is not set
-# CONFIG_VGA_CONSOLE is not set
+CONFIG_SERIAL_8250_NR_UARTS=4
+CONFIG_SERIAL_8250_RUNTIME_UARTS=4
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_TTY_PRINTK=y
+CONFIG_DEVPORT=y
+CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
+CONFIG_FB=y
+CONFIG_FB_CFB_FILLRECT=y
+CONFIG_FB_CFB_COPYAREA=y
+CONFIG_FB_CFB_IMAGEBLIT=y
+CONFIG_FB_AU1100=y
+CONFIG_DUMMY_CONSOLE=y
+CONFIG_FRAMEBUFFER_CONSOLE=y
+CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y
+CONFIG_FONTS=y
+CONFIG_FONT_8x16=y
+CONFIG_SOUND=y
+CONFIG_SND=y
+CONFIG_SND_TIMER=y
+CONFIG_SND_PCM=y
+CONFIG_SND_JACK=y
+CONFIG_SND_SEQUENCER=y
+CONFIG_SND_HRTIMER=y
+CONFIG_SND_SEQ_HRTIMER_DEFAULT=y
+CONFIG_SND_DYNAMIC_MINORS=y
+CONFIG_SND_VMASTER=y
+CONFIG_SND_AC97_CODEC=y
+CONFIG_SND_SOC=y
+CONFIG_SND_SOC_AC97_BUS=y
+CONFIG_SND_SOC_AU1XAUDIO=y
+CONFIG_SND_SOC_AU1XAC97C=y
+CONFIG_SND_SOC_DB1000=y
+CONFIG_SND_SOC_AC97_CODEC=y
+CONFIG_AC97_BUS=y
+CONFIG_HID_SUPPORT=y
+CONFIG_HID=y
+CONFIG_HIDRAW=y
+CONFIG_USB_HID=y
+CONFIG_USB_SUPPORT=y
 CONFIG_USB=y
-# CONFIG_USB_DEVICE_CLASS is not set
-CONFIG_USB_DYNAMIC_MINORS=y
 CONFIG_USB_SUSPEND=y
+CONFIG_USB_EHCI_HCD=y
+CONFIG_USB_EHCI_ROOT_HUB_TT=y
+CONFIG_USB_EHCI_TT_NEWSCHED=y
 CONFIG_USB_OHCI_HCD=y
+CONFIG_USB_UHCI_HCD=y
+CONFIG_USB_STORAGE=y
+CONFIG_NEW_LEDS=y
+CONFIG_LEDS_CLASS=y
+CONFIG_LEDS_TRIGGERS=y
+CONFIG_RTC_LIB=y
 CONFIG_RTC_CLASS=y
+CONFIG_RTC_HCTOSYS=y
+CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
+CONFIG_RTC_INTF_SYSFS=y
+CONFIG_RTC_INTF_PROC=y
+CONFIG_RTC_INTF_DEV=y
 CONFIG_RTC_DRV_AU1XXX=y
-CONFIG_EXT2_FS=y
-CONFIG_EXT3_FS=y
-# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
-# CONFIG_EXT3_FS_XATTR is not set
-# CONFIG_PROC_PAGE_MONITOR is not set
+CONFIG_EXT4_FS=y
+CONFIG_EXT4_USE_FOR_EXT23=y
+CONFIG_EXT4_FS_XATTR=y
+CONFIG_EXT4_FS_POSIX_ACL=y
+CONFIG_EXT4_FS_SECURITY=y
+CONFIG_JBD2=y
+CONFIG_FS_MBCACHE=y
+CONFIG_FS_POSIX_ACL=y
+CONFIG_EXPORTFS=y
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
+CONFIG_DNOTIFY=y
+CONFIG_INOTIFY_USER=y
+CONFIG_GENERIC_ACL=y
+CONFIG_PROC_FS=y
+CONFIG_PROC_KCORE=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_SYSFS=y
 CONFIG_TMPFS=y
-CONFIG_CRAMFS=y
+CONFIG_TMPFS_POSIX_ACL=y
+CONFIG_TMPFS_XATTR=y
+CONFIG_MISC_FILESYSTEMS=y
+CONFIG_JFFS2_FS=y
+CONFIG_JFFS2_FS_DEBUG=0
+CONFIG_JFFS2_FS_WRITEBUFFER=y
+CONFIG_JFFS2_SUMMARY=y
+CONFIG_JFFS2_FS_XATTR=y
+CONFIG_JFFS2_FS_POSIX_ACL=y
+CONFIG_JFFS2_FS_SECURITY=y
+CONFIG_JFFS2_COMPRESSION_OPTIONS=y
+CONFIG_JFFS2_ZLIB=y
+CONFIG_JFFS2_LZO=y
+CONFIG_JFFS2_RTIME=y
+CONFIG_JFFS2_RUBIN=y
+CONFIG_JFFS2_CMODE_PRIORITY=y
 CONFIG_SQUASHFS=y
+CONFIG_SQUASHFS_ZLIB=y
+CONFIG_SQUASHFS_LZO=y
+CONFIG_SQUASHFS_XZ=y
+CONFIG_SQUASHFS_FRAGMENT_CACHE_SIZE=3
+CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
+CONFIG_NFS_V4=y
+CONFIG_NFS_V4_1=y
+CONFIG_PNFS_FILE_LAYOUT=y
+CONFIG_PNFS_BLOCK=y
 CONFIG_ROOT_NFS=y
+CONFIG_NFS_USE_KERNEL_DNS=y
+CONFIG_NFS_USE_NEW_IDMAPPER=y
+CONFIG_NFSD=y
+CONFIG_NFSD_V2_ACL=y
+CONFIG_NFSD_V3=y
+CONFIG_NFSD_V3_ACL=y
+CONFIG_NFSD_V4=y
+CONFIG_LOCKD=y
+CONFIG_LOCKD_V4=y
+CONFIG_NFS_ACL_SUPPORT=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+CONFIG_SUNRPC_GSS=y
+CONFIG_SUNRPC_BACKCHANNEL=y
+CONFIG_MSDOS_PARTITION=y
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="iso8859-1"
 CONFIG_NLS_CODEPAGE_437=y
 CONFIG_NLS_CODEPAGE_850=y
 CONFIG_NLS_CODEPAGE_1250=y
+CONFIG_NLS_ASCII=y
 CONFIG_NLS_ISO8859_1=y
 CONFIG_NLS_ISO8859_15=y
 CONFIG_NLS_UTF8=y
-# CONFIG_ENABLE_WARN_DEPRECATED is not set
-# CONFIG_ENABLE_MUST_CHECK is not set
-CONFIG_STRIP_ASM_SYMS=y
-CONFIG_DEBUG_KERNEL=y
-# CONFIG_SCHED_DEBUG is not set
-# CONFIG_FTRACE is not set
+CONFIG_HAVE_ARCH_KGDB=y
+CONFIG_EARLY_PRINTK=y
+CONFIG_CMDLINE_BOOL=y
+CONFIG_CMDLINE="noirqdebug rootwait root=/dev/sda1 rootfstype=ext4 console=ttyS0,115200 video=au1100fb:panel:CRT_800x600_16"
 CONFIG_DEBUG_ZBOOT=y
 CONFIG_KEYS=y
 CONFIG_KEYS_DEBUG_PROC_KEYS=y
+CONFIG_SECURITYFS=y
+CONFIG_DEFAULT_SECURITY_DAC=y
+CONFIG_DEFAULT_SECURITY=""
+CONFIG_CRYPTO=y
+CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_ALGAPI2=y
+CONFIG_CRYPTO_AEAD2=y
+CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_BLKCIPHER2=y
+CONFIG_CRYPTO_HASH=y
+CONFIG_CRYPTO_HASH2=y
+CONFIG_CRYPTO_RNG=y
+CONFIG_CRYPTO_RNG2=y
+CONFIG_CRYPTO_PCOMP2=y
+CONFIG_CRYPTO_MANAGER=y
+CONFIG_CRYPTO_MANAGER2=y
+CONFIG_CRYPTO_MANAGER_DISABLE_TESTS=y
+CONFIG_CRYPTO_WORKQUEUE=y
+CONFIG_CRYPTO_ECB=y
+CONFIG_CRYPTO_SHA1=y
+CONFIG_CRYPTO_AES=y
+CONFIG_CRYPTO_ANSI_CPRNG=y
+CONFIG_BITREVERSE=y
+CONFIG_CRC_CCITT=y
+CONFIG_CRC16=y
+CONFIG_CRC_ITU_T=y
+CONFIG_CRC32=y
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZLIB_DEFLATE=y
+CONFIG_LZO_COMPRESS=y
+CONFIG_LZO_DECOMPRESS=y
+CONFIG_XZ_DEC=y

arch/mips/configs/db1100_defconfig

@@ -1,122 +0,0 @@
-CONFIG_MIPS_ALCHEMY=y
-CONFIG_MIPS_DB1100=y
-CONFIG_NO_HZ=y
-CONFIG_HIGH_RES_TIMERS=y
-CONFIG_HZ_100=y
-# CONFIG_SECCOMP is not set
-CONFIG_EXPERIMENTAL=y
-CONFIG_LOCALVERSION="-db1100"
-CONFIG_KERNEL_LZMA=y
-CONFIG_SYSVIPC=y
-CONFIG_POSIX_MQUEUE=y
-CONFIG_TINY_RCU=y
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_EXPERT=y
-# CONFIG_SYSCTL_SYSCALL is not set
-# CONFIG_KALLSYMS is not set
-# CONFIG_PCSPKR_PLATFORM is not set
-# CONFIG_COMPAT_BRK is not set
-CONFIG_SLAB=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-# CONFIG_LBDAF is not set
-# CONFIG_BLK_DEV_BSG is not set
-# CONFIG_IOSCHED_DEADLINE is not set
-# CONFIG_IOSCHED_CFQ is not set
-CONFIG_PCCARD=y
-CONFIG_PCMCIA_ALCHEMY_DEVBOARD=y
-CONFIG_PM=y
-CONFIG_PM_RUNTIME=y
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_INET=y
-CONFIG_IP_MULTICAST=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-CONFIG_IP_PNP_BOOTP=y
-CONFIG_IP_PNP_RARP=y
-# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
-# CONFIG_INET_XFRM_MODE_TUNNEL is not set
-# CONFIG_INET_XFRM_MODE_BEET is not set
-# CONFIG_INET_DIAG is not set
-# CONFIG_IPV6 is not set
-# CONFIG_WIRELESS is not set
-CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_MTD=y
-CONFIG_MTD_PARTITIONS=y
-CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLOCK=y
-CONFIG_MTD_CFI=y
-CONFIG_MTD_CFI_AMDSTD=y
-CONFIG_MTD_PHYSMAP=y
-# CONFIG_BLK_DEV is not set
-# CONFIG_MISC_DEVICES is not set
-CONFIG_IDE=y
-CONFIG_IDE_TASK_IOCTL=y
-CONFIG_NETDEVICES=y
-CONFIG_MARVELL_PHY=y
-CONFIG_DAVICOM_PHY=y
-CONFIG_QSEMI_PHY=y
-CONFIG_LXT_PHY=y
-CONFIG_CICADA_PHY=y
-CONFIG_VITESSE_PHY=y
-CONFIG_SMSC_PHY=y
-CONFIG_BROADCOM_PHY=y
-CONFIG_ICPLUS_PHY=y
-CONFIG_REALTEK_PHY=y
-CONFIG_NATIONAL_PHY=y
-CONFIG_STE10XP=y
-CONFIG_LSI_ET1011C_PHY=y
-CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
-CONFIG_MIPS_AU1X00_ENET=y
-# CONFIG_NETDEV_1000 is not set
-# CONFIG_NETDEV_10000 is not set
-# CONFIG_WLAN is not set
-# CONFIG_INPUT_MOUSEDEV is not set
-CONFIG_INPUT_EVDEV=y
-# CONFIG_INPUT_KEYBOARD is not set
-# CONFIG_INPUT_MOUSE is not set
-# CONFIG_SERIO is not set
-CONFIG_VT_HW_CONSOLE_BINDING=y
-CONFIG_SERIAL_8250=y
-CONFIG_SERIAL_8250_CONSOLE=y
-# CONFIG_LEGACY_PTYS is not set
-# CONFIG_HW_RANDOM is not set
-# CONFIG_HWMON is not set
-CONFIG_FB=y
-CONFIG_FB_AU1100=y
-# CONFIG_VGA_CONSOLE is not set
-CONFIG_FRAMEBUFFER_CONSOLE=y
-CONFIG_FONTS=y
-CONFIG_FONT_8x16=y
-# CONFIG_HID_SUPPORT is not set
-CONFIG_USB=y
-# CONFIG_USB_DEVICE_CLASS is not set
-CONFIG_USB_DYNAMIC_MINORS=y
-CONFIG_USB_SUSPEND=y
-CONFIG_USB_OHCI_HCD=y
-CONFIG_RTC_CLASS=y
-CONFIG_RTC_DRV_AU1XXX=y
-CONFIG_EXT2_FS=y
-# CONFIG_PROC_PAGE_MONITOR is not set
-CONFIG_TMPFS=y
-CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_SUMMARY=y
-CONFIG_JFFS2_FS_XATTR=y
-CONFIG_JFFS2_COMPRESSION_OPTIONS=y
-CONFIG_JFFS2_LZO=y
-CONFIG_JFFS2_RUBIN=y
-CONFIG_SQUASHFS=y
-CONFIG_NFS_FS=y
-CONFIG_NFS_V3=y
-CONFIG_ROOT_NFS=y
-CONFIG_STRIP_ASM_SYMS=y
-CONFIG_DEBUG_KERNEL=y
-# CONFIG_SCHED_DEBUG is not set
-# CONFIG_FTRACE is not set
-CONFIG_DEBUG_ZBOOT=y
-CONFIG_KEYS=y
-CONFIG_KEYS_DEBUG_PROC_KEYS=y
-CONFIG_SECURITYFS=y

arch/mips/configs/db1300_defconfig

@@ -0,0 +1,391 @@
+CONFIG_MIPS=y
+CONFIG_MIPS_ALCHEMY=y
+CONFIG_ALCHEMY_GPIOINT_AU1300=y
+CONFIG_MIPS_DB1300=y
+CONFIG_SOC_AU1300=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+CONFIG_ARCH_SUPPORTS_OPROFILE=y
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_GENERIC_CMOS_UPDATE=y
+CONFIG_SCHED_OMIT_FRAME_POINTER=y
+CONFIG_CEVT_R4K_LIB=y
+CONFIG_CSRC_R4K_LIB=y
+CONFIG_DMA_COHERENT=y
+CONFIG_SYS_HAS_EARLY_PRINTK=y
+CONFIG_MIPS_DISABLE_OBSOLETE_IDE=y
+CONFIG_GENERIC_GPIO=y
+CONFIG_CPU_LITTLE_ENDIAN=y
+CONFIG_SYS_SUPPORTS_APM_EMULATION=y
+CONFIG_SYS_SUPPORTS_LITTLE_ENDIAN=y
+CONFIG_IRQ_CPU=y
+CONFIG_MIPS_L1_CACHE_SHIFT=5
+CONFIG_CPU_MIPS32_R1=y
+CONFIG_SYS_SUPPORTS_ZBOOT=y
+CONFIG_SYS_HAS_CPU_MIPS32_R1=y
+CONFIG_CPU_MIPS32=y
+CONFIG_CPU_MIPSR1=y
+CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y
+CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y
+CONFIG_HARDWARE_WATCHPOINTS=y
+CONFIG_32BIT=y
+CONFIG_PAGE_SIZE_4KB=y
+CONFIG_FORCE_MAX_ZONEORDER=11
+CONFIG_CPU_HAS_PREFETCH=y
+CONFIG_MIPS_MT_DISABLED=y
+CONFIG_64BIT_PHYS_ADDR=y
+CONFIG_ARCH_PHYS_ADDR_T_64BIT=y
+CONFIG_CPU_HAS_SYNC=y
+CONFIG_CPU_SUPPORTS_HIGHMEM=y
+CONFIG_ARCH_FLATMEM_ENABLE=y
+CONFIG_ARCH_POPULATES_NODE_MAP=y
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_SPLIT_PTLOCK_CPUS=4
+CONFIG_COMPACTION=y
+CONFIG_MIGRATION=y
+CONFIG_PHYS_ADDR_T_64BIT=y
+CONFIG_ZONE_DMA_FLAG=0
+CONFIG_VIRT_TO_BUS=y
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
+CONFIG_NEED_PER_CPU_KM=y
+CONFIG_TICK_ONESHOT=y
+CONFIG_NO_HZ=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+CONFIG_HZ_100=y
+CONFIG_SYS_SUPPORTS_ARBIT_HZ=y
+CONFIG_HZ=100
+CONFIG_PREEMPT_NONE=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
+CONFIG_HAVE_IRQ_WORK=y
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_CROSS_COMPILE=""
+CONFIG_LOCALVERSION="-db1300"
+CONFIG_LOCALVERSION_AUTO=y
+CONFIG_HAVE_KERNEL_GZIP=y
+CONFIG_HAVE_KERNEL_BZIP2=y
+CONFIG_HAVE_KERNEL_LZMA=y
+CONFIG_HAVE_KERNEL_LZO=y
+CONFIG_KERNEL_LZMA=y
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+CONFIG_POSIX_MQUEUE=y
+CONFIG_POSIX_MQUEUE_SYSCTL=y
+CONFIG_FHANDLE=y
+CONFIG_HAVE_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_GENERIC_IRQ_SHOW=y
+CONFIG_TINY_RCU=y
+CONFIG_LOG_BUF_SHIFT=19
+CONFIG_NAMESPACES=y
+CONFIG_UTS_NS=y
+CONFIG_IPC_NS=y
+CONFIG_USER_NS=y
+CONFIG_PID_NS=y
+CONFIG_NET_NS=y
+CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
+CONFIG_EXPERT=y
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_KALLSYMS=y
+CONFIG_KALLSYMS_ALL=y
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_AIO=y
+CONFIG_EMBEDDED=y
+CONFIG_HAVE_PERF_EVENTS=y
+CONFIG_PERF_USE_VMALLOC=y
+CONFIG_SLAB=y
+CONFIG_HAVE_OPROFILE=y
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_DMA_ATTRS=y
+CONFIG_HAVE_DMA_API_DEBUG=y
+CONFIG_HAVE_ARCH_JUMP_LABEL=y
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
+CONFIG_BASE_SMALL=0
+CONFIG_BLOCK=y
+CONFIG_LBDAF=y
+CONFIG_BLK_DEV_BSG=y
+CONFIG_IOSCHED_NOOP=y
+CONFIG_DEFAULT_NOOP=y
+CONFIG_DEFAULT_IOSCHED="noop"
+CONFIG_INLINE_SPIN_UNLOCK=y
+CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
+CONFIG_INLINE_READ_UNLOCK=y
+CONFIG_INLINE_READ_UNLOCK_IRQ=y
+CONFIG_INLINE_WRITE_UNLOCK=y
+CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
+CONFIG_MMU=y
+CONFIG_PCCARD=y
+CONFIG_PCMCIA=y
+CONFIG_PCMCIA_LOAD_CIS=y
+CONFIG_PCMCIA_ALCHEMY_DEVBOARD=y
+CONFIG_BINFMT_ELF=y
+CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS=y
+CONFIG_TRAD_SIGNALS=y
+CONFIG_ARCH_HIBERNATION_POSSIBLE=y
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
+CONFIG_NET=y
+CONFIG_PACKET=y
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+CONFIG_IP_PNP_BOOTP=y
+CONFIG_IP_PNP_RARP=y
+CONFIG_INET_TUNNEL=y
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+CONFIG_IPV6=y
+CONFIG_INET6_XFRM_MODE_TRANSPORT=y
+CONFIG_INET6_XFRM_MODE_TUNNEL=y
+CONFIG_INET6_XFRM_MODE_BEET=y
+CONFIG_IPV6_SIT=y
+CONFIG_IPV6_NDISC_NODETYPE=y
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+CONFIG_FW_LOADER=y
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
+CONFIG_MTD=y
+CONFIG_MTD_CMDLINE_PARTS=y
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLKDEVS=y
+CONFIG_MTD_BLOCK=y
+CONFIG_MTD_CFI=y
+CONFIG_MTD_GEN_PROBE=y
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+CONFIG_MTD_CFI_AMDSTD=y
+CONFIG_MTD_CFI_UTIL=y
+CONFIG_MTD_PHYSMAP=y
+CONFIG_MTD_NAND_ECC=y
+CONFIG_MTD_NAND=y
+CONFIG_MTD_NAND_IDS=y
+CONFIG_MTD_NAND_PLATFORM=y
+CONFIG_BLK_DEV=y
+CONFIG_BLK_DEV_LOOP=y
+CONFIG_BLK_DEV_UB=y
+CONFIG_HAVE_IDE=y
+CONFIG_IDE=y
+CONFIG_IDE_GD=y
+CONFIG_IDE_GD_ATA=y
+CONFIG_BLK_DEV_IDECS=y
+CONFIG_IDE_TASK_IOCTL=y
+CONFIG_IDE_PROC_FS=y
+CONFIG_BLK_DEV_PLATFORM=y
+CONFIG_SCSI_MOD=y
+CONFIG_NETDEVICES=y
+CONFIG_MII=y
+CONFIG_PHYLIB=y
+CONFIG_SMSC_PHY=y
+CONFIG_NET_ETHERNET=y
+CONFIG_SMSC911X=y
+CONFIG_INPUT=y
+CONFIG_INPUT_EVDEV=y
+CONFIG_INPUT_KEYBOARD=y
+CONFIG_KEYBOARD_GPIO=y
+CONFIG_INPUT_TOUCHSCREEN=y
+CONFIG_TOUCHSCREEN_WM97XX=y
+CONFIG_TOUCHSCREEN_WM9712=y
+CONFIG_TOUCHSCREEN_WM9713=y
+CONFIG_INPUT_MISC=y
+CONFIG_INPUT_UINPUT=y
+CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+CONFIG_VT_HW_CONSOLE_BINDING=y
+CONFIG_UNIX98_PTYS=y
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SERIAL_8250_NR_UARTS=4
+CONFIG_SERIAL_8250_RUNTIME_UARTS=4
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_I2C=y
+CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_CHARDEV=y
+CONFIG_I2C_SMBUS=y
+CONFIG_I2C_AU1550=y
+CONFIG_SPI=y
+CONFIG_SPI_MASTER=y
+CONFIG_SPI_AU1550=y
+CONFIG_SPI_BITBANG=y
+CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
+CONFIG_HWMON=y
+CONFIG_HWMON_VID=y
+CONFIG_SENSORS_ADM1025=y
+CONFIG_FB=y
+CONFIG_FB_AU1200=y
+CONFIG_DUMMY_CONSOLE=y
+CONFIG_FRAMEBUFFER_CONSOLE=y
+CONFIG_FONTS=y
+CONFIG_FONT_ACORN_8x8=y
+CONFIG_LOGO=y
+CONFIG_LOGO_LINUX_CLUT224=y
+CONFIG_SOUND=y
+CONFIG_SND=y
+CONFIG_SND_TIMER=y
+CONFIG_SND_PCM=y
+CONFIG_SND_JACK=y
+CONFIG_SND_HRTIMER=y
+CONFIG_SND_DYNAMIC_MINORS=y
+CONFIG_SND_VERBOSE_PROCFS=y
+CONFIG_SND_VERBOSE_PRINTK=y
+CONFIG_SND_VMASTER=y
+CONFIG_SND_AC97_CODEC=y
+CONFIG_SND_SOC=y
+CONFIG_SND_SOC_CACHE_LZO=y
+CONFIG_SND_SOC_AC97_BUS=y
+CONFIG_SND_SOC_AU1XPSC=y
+CONFIG_SND_SOC_AU1XPSC_I2S=y
+CONFIG_SND_SOC_AU1XPSC_AC97=y
+CONFIG_SND_SOC_DB1300=y
+CONFIG_SND_SOC_I2C_AND_SPI=y
+CONFIG_SND_SOC_WM8731=y
+CONFIG_SND_SOC_WM9712=y
+CONFIG_AC97_BUS=y
+CONFIG_HID_SUPPORT=y
+CONFIG_HID=y
+CONFIG_HIDRAW=y
+CONFIG_USB_HID=y
+CONFIG_USB_HIDDEV=y
+CONFIG_USB_SUPPORT=y
+CONFIG_USB_ARCH_HAS_HCD=y
+CONFIG_USB_ARCH_HAS_OHCI=y
+CONFIG_USB_ARCH_HAS_EHCI=y
+CONFIG_USB=y
+CONFIG_USB_DYNAMIC_MINORS=y
+CONFIG_USB_EHCI_HCD=y
+CONFIG_USB_EHCI_ROOT_HUB_TT=y
+CONFIG_USB_EHCI_TT_NEWSCHED=y
+CONFIG_USB_OHCI_HCD=y
+CONFIG_USB_OHCI_LITTLE_ENDIAN=y
+CONFIG_RTC_LIB=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_HCTOSYS=y
+CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
+CONFIG_RTC_INTF_SYSFS=y
+CONFIG_RTC_INTF_PROC=y
+CONFIG_RTC_INTF_DEV=y
+CONFIG_RTC_INTF_DEV_UIE_EMUL=y
+CONFIG_RTC_DRV_AU1XXX=y
+CONFIG_EXT2_FS=y
+CONFIG_FS_POSIX_ACL=y
+CONFIG_EXPORTFS=y
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
+CONFIG_DNOTIFY=y
+CONFIG_INOTIFY_USER=y
+CONFIG_GENERIC_ACL=y
+CONFIG_FAT_FS=y
+CONFIG_VFAT_FS=y
+CONFIG_FAT_DEFAULT_CODEPAGE=437
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
+CONFIG_PROC_FS=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+CONFIG_TMPFS_POSIX_ACL=y
+CONFIG_TMPFS_XATTR=y
+CONFIG_MISC_FILESYSTEMS=y
+CONFIG_JFFS2_FS=y
+CONFIG_JFFS2_FS_DEBUG=0
+CONFIG_JFFS2_FS_WRITEBUFFER=y
+CONFIG_JFFS2_SUMMARY=y
+CONFIG_JFFS2_FS_XATTR=y
+CONFIG_JFFS2_FS_POSIX_ACL=y
+CONFIG_JFFS2_FS_SECURITY=y
+CONFIG_JFFS2_COMPRESSION_OPTIONS=y
+CONFIG_JFFS2_ZLIB=y
+CONFIG_JFFS2_LZO=y
+CONFIG_JFFS2_RTIME=y
+CONFIG_JFFS2_RUBIN=y
+CONFIG_JFFS2_CMODE_PRIORITY=y
+CONFIG_SQUASHFS=y
+CONFIG_SQUASHFS_XZ=y
+CONFIG_SQUASHFS_FRAGMENT_CACHE_SIZE=3
+CONFIG_NETWORK_FILESYSTEMS=y
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+CONFIG_ROOT_NFS=y
+CONFIG_LOCKD=y
+CONFIG_LOCKD_V4=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+CONFIG_MSDOS_PARTITION=y
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="iso8859-1"
+CONFIG_NLS_CODEPAGE_437=y
+CONFIG_NLS_CODEPAGE_850=y
+CONFIG_NLS_ASCII=y
+CONFIG_NLS_ISO8859_1=y
+CONFIG_NLS_ISO8859_15=y
+CONFIG_NLS_UTF8=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_PRINTK_TIME=y
+CONFIG_DEFAULT_MESSAGE_LOGLEVEL=4
+CONFIG_ENABLE_WARN_DEPRECATED=y
+CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
+CONFIG_MAGIC_SYSRQ=y
+CONFIG_STRIP_ASM_SYMS=y
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
+CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_HAVE_C_RECORDMCOUNT=y
+CONFIG_TRACING_SUPPORT=y
+CONFIG_HAVE_ARCH_KGDB=y
+CONFIG_EARLY_PRINTK=y
+CONFIG_CMDLINE_BOOL=y
+CONFIG_CMDLINE="video=au1200fb:panel:bs console=tty console=ttyS2,115200"
+CONFIG_DEBUG_ZBOOT=y
+CONFIG_DEFAULT_SECURITY_DAC=y
+CONFIG_DEFAULT_SECURITY=""
+CONFIG_CRYPTO=y
+CONFIG_BITREVERSE=y
+CONFIG_CRC32=y
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZLIB_DEFLATE=y
+CONFIG_LZO_COMPRESS=y
+CONFIG_LZO_DECOMPRESS=y
+CONFIG_XZ_DEC=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
+CONFIG_NLATTR=y
+CONFIG_GENERIC_ATOMIC64=y

arch/mips/configs/db1500_defconfig

@@ -1,128 +0,0 @@
-CONFIG_MIPS_ALCHEMY=y
-CONFIG_MIPS_DB1500=y
-CONFIG_CPU_LITTLE_ENDIAN=y
-CONFIG_NO_HZ=y
-CONFIG_HIGH_RES_TIMERS=y
-CONFIG_HZ_100=y
-# CONFIG_SECCOMP is not set
-CONFIG_EXPERIMENTAL=y
-CONFIG_LOCALVERSION="-db1500"
-CONFIG_KERNEL_LZMA=y
-CONFIG_SYSVIPC=y
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_EXPERT=y
-# CONFIG_KALLSYMS is not set
-# CONFIG_PCSPKR_PLATFORM is not set
-# CONFIG_VM_EVENT_COUNTERS is not set
-# CONFIG_COMPAT_BRK is not set
-CONFIG_SLAB=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-# CONFIG_IOSCHED_DEADLINE is not set
-# CONFIG_IOSCHED_CFQ is not set
-CONFIG_PCI=y
-CONFIG_PCCARD=y
-# CONFIG_CARDBUS is not set
-CONFIG_PCMCIA_ALCHEMY_DEVBOARD=y
-CONFIG_PM=y
-CONFIG_PM_RUNTIME=y
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_INET=y
-CONFIG_IP_MULTICAST=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-CONFIG_IP_PNP_BOOTP=y
-CONFIG_IP_PNP_RARP=y
-# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
-# CONFIG_INET_XFRM_MODE_TUNNEL is not set
-# CONFIG_INET_XFRM_MODE_BEET is not set
-# CONFIG_INET_DIAG is not set
-# CONFIG_IPV6 is not set
-# CONFIG_WIRELESS is not set
-CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_MTD=y
-CONFIG_MTD_PARTITIONS=y
-CONFIG_MTD_CMDLINE_PARTS=y
-CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLOCK=y
-CONFIG_MTD_CFI=y
-CONFIG_MTD_CFI_INTELEXT=y
-CONFIG_MTD_CFI_AMDSTD=y
-CONFIG_MTD_PHYSMAP=y
-# CONFIG_MISC_DEVICES is not set
-CONFIG_IDE=y
-CONFIG_BLK_DEV_IDECS=y
-# CONFIG_IDEPCI_PCIBUS_ORDER is not set
-CONFIG_BLK_DEV_HPT366=y
-CONFIG_NETDEVICES=y
-CONFIG_MARVELL_PHY=y
-CONFIG_DAVICOM_PHY=y
-CONFIG_QSEMI_PHY=y
-CONFIG_LXT_PHY=y
-CONFIG_CICADA_PHY=y
-CONFIG_VITESSE_PHY=y
-CONFIG_SMSC_PHY=y
-CONFIG_BROADCOM_PHY=y
-CONFIG_ICPLUS_PHY=y
-CONFIG_REALTEK_PHY=y
-CONFIG_NATIONAL_PHY=y
-CONFIG_STE10XP=y
-CONFIG_LSI_ET1011C_PHY=y
-CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
-CONFIG_MIPS_AU1X00_ENET=y
-# CONFIG_NETDEV_1000 is not set
-# CONFIG_NETDEV_10000 is not set
-# CONFIG_WLAN is not set
-# CONFIG_INPUT_MOUSEDEV is not set
-CONFIG_INPUT_EVDEV=y
-# CONFIG_INPUT_KEYBOARD is not set
-# CONFIG_INPUT_MOUSE is not set
-# CONFIG_SERIO is not set
-CONFIG_SERIAL_8250=y
-CONFIG_SERIAL_8250_CONSOLE=y
-# CONFIG_SERIAL_8250_PCI is not set
-# CONFIG_LEGACY_PTYS is not set
-# CONFIG_HW_RANDOM is not set
-# CONFIG_HWMON is not set
-# CONFIG_VGA_ARB is not set
-# CONFIG_VGA_CONSOLE is not set
-# CONFIG_HID_SUPPORT is not set
-CONFIG_USB=y
-# CONFIG_USB_DEVICE_CLASS is not set
-CONFIG_USB_DYNAMIC_MINORS=y
-CONFIG_USB_SUSPEND=y
-CONFIG_USB_OHCI_HCD=y
-CONFIG_RTC_CLASS=y
-CONFIG_RTC_DRV_AU1XXX=y
-CONFIG_EXT2_FS=y
-# CONFIG_PROC_PAGE_MONITOR is not set
-CONFIG_TMPFS=y
-CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_SUMMARY=y
-CONFIG_JFFS2_FS_XATTR=y
-CONFIG_JFFS2_COMPRESSION_OPTIONS=y
-CONFIG_JFFS2_LZO=y
-CONFIG_JFFS2_RUBIN=y
-CONFIG_SQUASHFS=y
-CONFIG_NFS_FS=y
-CONFIG_NFS_V3=y
-CONFIG_ROOT_NFS=y
-CONFIG_NLS_CODEPAGE_437=y
-CONFIG_NLS_CODEPAGE_850=y
-CONFIG_NLS_CODEPAGE_1250=y
-CONFIG_NLS_ASCII=y
-CONFIG_NLS_ISO8859_1=y
-CONFIG_NLS_ISO8859_15=y
-CONFIG_NLS_UTF8=y
-CONFIG_STRIP_ASM_SYMS=y
-CONFIG_DEBUG_KERNEL=y
-# CONFIG_SCHED_DEBUG is not set
-# CONFIG_RCU_CPU_STALL_DETECTOR is not set
-# CONFIG_FTRACE is not set
-CONFIG_DEBUG_ZBOOT=y
-CONFIG_KEYS=y
-CONFIG_KEYS_DEBUG_PROC_KEYS=y
-CONFIG_SECURITYFS=y

arch/mips/configs/db1550_defconfig

@@ -1,145 +1,262 @@
+CONFIG_MIPS=y
 CONFIG_MIPS_ALCHEMY=y
 CONFIG_MIPS_DB1550=y
+CONFIG_SCHED_OMIT_FRAME_POINTER=y
+CONFIG_GENERIC_GPIO=y
+CONFIG_TICK_ONESHOT=y
 CONFIG_NO_HZ=y
 CONFIG_HIGH_RES_TIMERS=y
 CONFIG_HZ_100=y
-# CONFIG_SECCOMP is not set
+CONFIG_HZ=100
 CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
 CONFIG_LOCALVERSION="-db1550"
+CONFIG_LOCALVERSION_AUTO=y
 CONFIG_KERNEL_LZMA=y
+CONFIG_DEFAULT_HOSTNAME="db1550"
+CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
 CONFIG_POSIX_MQUEUE=y
+CONFIG_POSIX_MQUEUE_SYSCTL=y
+CONFIG_FHANDLE=y
+CONFIG_AUDIT=y
 CONFIG_TINY_RCU=y
-CONFIG_LOG_BUF_SHIFT=14
+CONFIG_LOG_BUF_SHIFT=18
+CONFIG_NAMESPACES=y
+CONFIG_UTS_NS=y
+CONFIG_IPC_NS=y
+CONFIG_USER_NS=y
+CONFIG_PID_NS=y
+CONFIG_NET_NS=y
 CONFIG_EXPERT=y
-# CONFIG_SYSCTL_SYSCALL is not set
-# CONFIG_KALLSYMS is not set
-# CONFIG_PCSPKR_PLATFORM is not set
-# CONFIG_VM_EVENT_COUNTERS is not set
-# CONFIG_COMPAT_BRK is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_AIO=y
+CONFIG_EMBEDDED=y
+CONFIG_PCI_QUIRKS=y
 CONFIG_SLAB=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-# CONFIG_IOSCHED_DEADLINE is not set
-# CONFIG_IOSCHED_CFQ is not set
+CONFIG_BLOCK=y
+CONFIG_LBDAF=y
+CONFIG_BLK_DEV_BSG=y
+CONFIG_BLK_DEV_BSGLIB=y
+CONFIG_IOSCHED_NOOP=y
+CONFIG_DEFAULT_NOOP=y
+CONFIG_DEFAULT_IOSCHED="noop"
 CONFIG_PCI=y
 CONFIG_PCCARD=y
-# CONFIG_CARDBUS is not set
+CONFIG_PCMCIA=y
+CONFIG_PCMCIA_LOAD_CIS=y
 CONFIG_PCMCIA_ALCHEMY_DEVBOARD=y
-CONFIG_PM=y
+CONFIG_BINFMT_ELF=y
+CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS=y
+CONFIG_BINFMT_MISC=y
+CONFIG_SUSPEND=y
+CONFIG_SUSPEND_FREEZER=y
+CONFIG_PM_SLEEP=y
 CONFIG_PM_RUNTIME=y
+CONFIG_PM=y
 CONFIG_NET=y
 CONFIG_PACKET=y
 CONFIG_UNIX=y
+CONFIG_XFRM=y
 CONFIG_INET=y
 CONFIG_IP_MULTICAST=y
 CONFIG_IP_PNP=y
 CONFIG_IP_PNP_DHCP=y
 CONFIG_IP_PNP_BOOTP=y
 CONFIG_IP_PNP_RARP=y
-# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
-# CONFIG_INET_XFRM_MODE_TUNNEL is not set
-# CONFIG_INET_XFRM_MODE_BEET is not set
-# CONFIG_INET_DIAG is not set
-# CONFIG_IPV6 is not set
-# CONFIG_WIRELESS is not set
-CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_INET_TUNNEL=y
+CONFIG_INET_LRO=y
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+CONFIG_IPV6=y
+CONFIG_INET6_XFRM_MODE_TRANSPORT=y
+CONFIG_INET6_XFRM_MODE_TUNNEL=y
+CONFIG_INET6_XFRM_MODE_BEET=y
+CONFIG_IPV6_SIT=y
+CONFIG_IPV6_NDISC_NODETYPE=y
+CONFIG_DNS_RESOLVER=y
+CONFIG_UEVENT_HELPER_PATH=""
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+CONFIG_FW_LOADER=y
+CONFIG_FIRMWARE_IN_KERNEL=y
 CONFIG_MTD=y
-CONFIG_MTD_PARTITIONS=y
 CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLKDEVS=y
 CONFIG_MTD_BLOCK=y
 CONFIG_MTD_CFI=y
+CONFIG_MTD_GEN_PROBE=y
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
 CONFIG_MTD_CFI_AMDSTD=y
+CONFIG_MTD_CFI_UTIL=y
 CONFIG_MTD_PHYSMAP=y
+CONFIG_MTD_M25P80=y
+CONFIG_MTD_NAND_ECC=y
 CONFIG_MTD_NAND=y
-CONFIG_MTD_NAND_AU1550=y
-CONFIG_BLK_DEV_UB=y
-# CONFIG_MISC_DEVICES is not set
-CONFIG_IDE=y
-CONFIG_BLK_DEV_IDECS=y
-CONFIG_BLK_DEV_IDECD=y
-# CONFIG_BLK_DEV_IDECD_VERBOSE_ERRORS is not set
-CONFIG_IDE_TASK_IOCTL=y
-# CONFIG_IDEPCI_PCIBUS_ORDER is not set
-CONFIG_BLK_DEV_HPT366=y
+CONFIG_MTD_NAND_IDS=y
+CONFIG_MTD_NAND_PLATFORM=y
+CONFIG_MISC_DEVICES=y
+CONFIG_EEPROM_AT24=y
+CONFIG_SCSI_MOD=y
+CONFIG_SCSI=y
+CONFIG_SCSI_DMA=y
+CONFIG_BLK_DEV_SD=y
+CONFIG_CHR_DEV_SG=y
+CONFIG_SCSI_MULTI_LUN=y
+CONFIG_SCSI_SCAN_ASYNC=y
+CONFIG_ATA=y
+CONFIG_ATA_SFF=y
+CONFIG_ATA_BMDMA=y
+CONFIG_PATA_HPT37X=y
+CONFIG_PATA_PCMCIA=y
+CONFIG_MD=y
+CONFIG_BLK_DEV_DM=y
 CONFIG_NETDEVICES=y
-CONFIG_MARVELL_PHY=y
-CONFIG_DAVICOM_PHY=y
-CONFIG_QSEMI_PHY=y
-CONFIG_LXT_PHY=y
-CONFIG_CICADA_PHY=y
-CONFIG_VITESSE_PHY=y
-CONFIG_SMSC_PHY=y
-CONFIG_BROADCOM_PHY=y
-CONFIG_ICPLUS_PHY=y
-CONFIG_REALTEK_PHY=y
-CONFIG_NATIONAL_PHY=y
-CONFIG_STE10XP=y
-CONFIG_LSI_ET1011C_PHY=y
-CONFIG_NET_ETHERNET=y
 CONFIG_MII=y
+CONFIG_PHYLIB=y
+CONFIG_NET_ETHERNET=y
 CONFIG_MIPS_AU1X00_ENET=y
-# CONFIG_NETDEV_1000 is not set
-# CONFIG_NETDEV_10000 is not set
-# CONFIG_WLAN is not set
-# CONFIG_INPUT_MOUSEDEV is not set
+CONFIG_NET_PCMCIA=y
+CONFIG_PCMCIA_3C589=y
+CONFIG_PCMCIA_PCNET=y
+CONFIG_INPUT=y
 CONFIG_INPUT_EVDEV=y
-# CONFIG_INPUT_KEYBOARD is not set
-# CONFIG_INPUT_MOUSE is not set
-# CONFIG_SERIO is not set
+CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+CONFIG_UNIX98_PTYS=y
+CONFIG_DEVPTS_MULTIPLE_INSTANCES=y
+CONFIG_DEVKMEM=y
 CONFIG_SERIAL_8250=y
 CONFIG_SERIAL_8250_CONSOLE=y
-# CONFIG_LEGACY_PTYS is not set
-# CONFIG_HW_RANDOM is not set
+CONFIG_SERIAL_8250_NR_UARTS=4
+CONFIG_SERIAL_8250_RUNTIME_UARTS=4
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_DEVPORT=y
 CONFIG_I2C=y
-# CONFIG_I2C_COMPAT is not set
+CONFIG_I2C_BOARDINFO=y
 CONFIG_I2C_CHARDEV=y
-# CONFIG_I2C_HELPER_AUTO is not set
 CONFIG_I2C_AU1550=y
 CONFIG_SPI=y
+CONFIG_SPI_MASTER=y
 CONFIG_SPI_AU1550=y
-# CONFIG_HWMON is not set
-# CONFIG_VGA_ARB is not set
-# CONFIG_VGA_CONSOLE is not set
+CONFIG_SPI_BITBANG=y
+CONFIG_HWMON=y
+CONFIG_SENSORS_ADM1025=y
+CONFIG_SENSORS_LM70=y
+CONFIG_DUMMY_CONSOLE=y
 CONFIG_SOUND=y
 CONFIG_SND=y
-CONFIG_SND_HRTIMER=y
-CONFIG_SND_DYNAMIC_MINORS=y
-# CONFIG_SND_SUPPORT_OLD_API is not set
-# CONFIG_SND_VERBOSE_PROCFS is not set
-# CONFIG_SND_DRIVERS is not set
-# CONFIG_SND_PCI is not set
-# CONFIG_SND_SPI is not set
-# CONFIG_SND_MIPS is not set
-# CONFIG_SND_PCMCIA is not set
+CONFIG_SND_TIMER=y
+CONFIG_SND_PCM=y
+CONFIG_SND_JACK=y
+CONFIG_SND_VMASTER=y
+CONFIG_SND_AC97_CODEC=y
 CONFIG_SND_SOC=y
+CONFIG_SND_SOC_AC97_BUS=y
 CONFIG_SND_SOC_AU1XPSC=y
-# CONFIG_HID_SUPPORT is not set
+CONFIG_SND_SOC_AU1XPSC_I2S=y
+CONFIG_SND_SOC_AU1XPSC_AC97=y
+CONFIG_SND_SOC_DB1200=y
+CONFIG_SND_SOC_I2C_AND_SPI=y
+CONFIG_SND_SOC_AC97_CODEC=y
+CONFIG_SND_SOC_WM8731=y
+CONFIG_SND_SOC_WM9712=y
+CONFIG_AC97_BUS=y
 CONFIG_USB=y
-# CONFIG_USB_DEVICE_CLASS is not set
 CONFIG_USB_DYNAMIC_MINORS=y
-CONFIG_USB_SUSPEND=y
 CONFIG_USB_EHCI_HCD=y
 CONFIG_USB_EHCI_ROOT_HUB_TT=y
+CONFIG_USB_EHCI_TT_NEWSCHED=y
 CONFIG_USB_OHCI_HCD=y
+CONFIG_USB_OHCI_LITTLE_ENDIAN=y
+CONFIG_USB_UHCI_HCD=y
+CONFIG_USB_STORAGE=y
+CONFIG_RTC_LIB=y
 CONFIG_RTC_CLASS=y
+CONFIG_RTC_HCTOSYS=y
+CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
+CONFIG_RTC_INTF_SYSFS=y
+CONFIG_RTC_INTF_PROC=y
+CONFIG_RTC_INTF_DEV=y
 CONFIG_RTC_DRV_AU1XXX=y
-CONFIG_EXT2_FS=y
-# CONFIG_PROC_PAGE_MONITOR is not set
+CONFIG_EXT4_FS=y
+CONFIG_EXT4_USE_FOR_EXT23=y
+CONFIG_EXT4_FS_XATTR=y
+CONFIG_EXT4_FS_POSIX_ACL=y
+CONFIG_EXT4_FS_SECURITY=y
+CONFIG_JBD2=y
+CONFIG_FS_MBCACHE=y
+CONFIG_FS_POSIX_ACL=y
+CONFIG_EXPORTFS=y
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
+CONFIG_DNOTIFY=y
+CONFIG_INOTIFY_USER=y
+CONFIG_PROC_FS=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_SYSFS=y
 CONFIG_TMPFS=y
 CONFIG_CONFIGFS_FS=y
+CONFIG_MISC_FILESYSTEMS=y
 CONFIG_JFFS2_FS=y
+CONFIG_JFFS2_FS_DEBUG=0
+CONFIG_JFFS2_FS_WRITEBUFFER=y
 CONFIG_JFFS2_SUMMARY=y
 CONFIG_JFFS2_FS_XATTR=y
-# CONFIG_JFFS2_FS_POSIX_ACL is not set
-# CONFIG_JFFS2_FS_SECURITY is not set
 CONFIG_JFFS2_COMPRESSION_OPTIONS=y
+CONFIG_JFFS2_ZLIB=y
 CONFIG_JFFS2_LZO=y
+CONFIG_JFFS2_RTIME=y
 CONFIG_JFFS2_RUBIN=y
+CONFIG_JFFS2_CMODE_PRIORITY=y
 CONFIG_SQUASHFS=y
+CONFIG_SQUASHFS_ZLIB=y
+CONFIG_SQUASHFS_FRAGMENT_CACHE_SIZE=3
+CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
+CONFIG_NFS_V3_ACL=y
+CONFIG_NFS_V4=y
+CONFIG_NFS_V4_1=y
+CONFIG_PNFS_FILE_LAYOUT=y
+CONFIG_PNFS_BLOCK=y
 CONFIG_ROOT_NFS=y
+CONFIG_NFS_USE_KERNEL_DNS=y
+CONFIG_NFS_USE_NEW_IDMAPPER=y
+CONFIG_NFSD=y
+CONFIG_NFSD_V2_ACL=y
+CONFIG_NFSD_V3=y
+CONFIG_NFSD_V3_ACL=y
+CONFIG_NFSD_V4=y
+CONFIG_LOCKD=y
+CONFIG_LOCKD_V4=y
+CONFIG_NFS_ACL_SUPPORT=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+CONFIG_SUNRPC_GSS=y
+CONFIG_SUNRPC_BACKCHANNEL=y
+CONFIG_MSDOS_PARTITION=y
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="iso8859-1"
 CONFIG_NLS_CODEPAGE_437=y
 CONFIG_NLS_CODEPAGE_850=y
 CONFIG_NLS_CODEPAGE_852=y
@@ -148,10 +265,21 @@ CONFIG_NLS_ASCII=y
 CONFIG_NLS_ISO8859_1=y
 CONFIG_NLS_ISO8859_15=y
 CONFIG_NLS_UTF8=y
-CONFIG_DEBUG_KERNEL=y
-# CONFIG_SCHED_DEBUG is not set
-# CONFIG_FTRACE is not set
-CONFIG_DEBUG_ZBOOT=y
+CONFIG_DEFAULT_MESSAGE_LOGLEVEL=4
+CONFIG_FRAME_WARN=1024
+CONFIG_CMDLINE_BOOL=y
+CONFIG_CMDLINE="noirqdebug console=ttyS0,115200 root=/dev/sda1 rootfstype=ext4"
 CONFIG_KEYS=y
-CONFIG_KEYS_DEBUG_PROC_KEYS=y
 CONFIG_SECURITYFS=y
+CONFIG_DEFAULT_SECURITY_DAC=y
+CONFIG_BITREVERSE=y
+CONFIG_CRC16=y
+CONFIG_CRC_ITU_T=y
+CONFIG_CRC32=y
+CONFIG_AUDIT_GENERIC=y
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZLIB_DEFLATE=y
+CONFIG_LZO_COMPRESS=y
+CONFIG_LZO_DECOMPRESS=y
+CONFIG_BCH=y
+CONFIG_NLATTR=y

arch/mips/configs/pb1200_defconfig

@@ -1,170 +0,0 @@
-CONFIG_MIPS_ALCHEMY=y
-CONFIG_MIPS_PB1200=y
-CONFIG_KSM=y
-CONFIG_NO_HZ=y
-CONFIG_HIGH_RES_TIMERS=y
-CONFIG_HZ_100=y
-# CONFIG_SECCOMP is not set
-CONFIG_EXPERIMENTAL=y
-CONFIG_LOCALVERSION="-pb1200"
-CONFIG_KERNEL_LZMA=y
-CONFIG_SYSVIPC=y
-CONFIG_POSIX_MQUEUE=y
-CONFIG_TINY_RCU=y
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_EXPERT=y
-# CONFIG_SYSCTL_SYSCALL is not set
-# CONFIG_KALLSYMS is not set
-# CONFIG_PCSPKR_PLATFORM is not set
-# CONFIG_VM_EVENT_COUNTERS is not set
-# CONFIG_COMPAT_BRK is not set
-CONFIG_SLAB=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-# CONFIG_LBDAF is not set
-# CONFIG_BLK_DEV_BSG is not set
-# CONFIG_IOSCHED_DEADLINE is not set
-# CONFIG_IOSCHED_CFQ is not set
-CONFIG_PCCARD=y
-CONFIG_PCMCIA_ALCHEMY_DEVBOARD=y
-CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS=y
-CONFIG_BINFMT_MISC=y
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_INET=y
-CONFIG_IP_MULTICAST=y
-CONFIG_IP_PNP=y
-# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
-# CONFIG_INET_XFRM_MODE_TUNNEL is not set
-# CONFIG_INET_XFRM_MODE_BEET is not set
-# CONFIG_INET_DIAG is not set
-# CONFIG_IPV6 is not set
-# CONFIG_WIRELESS is not set
-CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_MTD=y
-CONFIG_MTD_PARTITIONS=y
-CONFIG_MTD_CMDLINE_PARTS=y
-CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLOCK=y
-CONFIG_MTD_CFI=y
-CONFIG_MTD_CFI_AMDSTD=y
-CONFIG_MTD_PHYSMAP=y
-CONFIG_MTD_NAND=y
-CONFIG_MTD_NAND_PLATFORM=y
-CONFIG_BLK_DEV_LOOP=y
-CONFIG_BLK_DEV_UB=y
-# CONFIG_MISC_DEVICES is not set
-CONFIG_IDE=y
-CONFIG_BLK_DEV_IDECS=y
-CONFIG_BLK_DEV_IDECD=y
-CONFIG_IDE_TASK_IOCTL=y
-# CONFIG_IDE_PROC_FS is not set
-CONFIG_BLK_DEV_IDE_AU1XXX=y
-CONFIG_NETDEVICES=y
-CONFIG_NET_ETHERNET=y
-CONFIG_SMC91X=y
-# CONFIG_NETDEV_1000 is not set
-# CONFIG_NETDEV_10000 is not set
-# CONFIG_WLAN is not set
-# CONFIG_INPUT_MOUSEDEV is not set
-CONFIG_INPUT_EVDEV=y
-# CONFIG_INPUT_KEYBOARD is not set
-# CONFIG_INPUT_MOUSE is not set
-# CONFIG_SERIO is not set
-CONFIG_VT_HW_CONSOLE_BINDING=y
-CONFIG_SERIAL_8250=y
-CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_SERIAL_8250_NR_UARTS=2
-CONFIG_SERIAL_8250_RUNTIME_UARTS=2
-# CONFIG_LEGACY_PTYS is not set
-# CONFIG_HW_RANDOM is not set
-CONFIG_I2C=y
-# CONFIG_I2C_COMPAT is not set
-CONFIG_I2C_CHARDEV=y
-# CONFIG_I2C_HELPER_AUTO is not set
-CONFIG_I2C_AU1550=y
-CONFIG_SPI=y
-CONFIG_SPI_AU1550=y
-CONFIG_GPIOLIB=y
-CONFIG_GPIO_SYSFS=y
-CONFIG_SENSORS_ADM1025=y
-CONFIG_SENSORS_LM70=y
-CONFIG_FB=y
-CONFIG_FB_AU1200=y
-# CONFIG_VGA_CONSOLE is not set
-CONFIG_FRAMEBUFFER_CONSOLE=y
-CONFIG_FONTS=y
-CONFIG_FONT_8x16=y
-CONFIG_SOUND=y
-CONFIG_SND=y
-CONFIG_SND_DYNAMIC_MINORS=y
-# CONFIG_SND_SUPPORT_OLD_API is not set
-# CONFIG_SND_VERBOSE_PROCFS is not set
-# CONFIG_SND_DRIVERS is not set
-# CONFIG_SND_SPI is not set
-# CONFIG_SND_MIPS is not set
-# CONFIG_SND_USB is not set
-# CONFIG_SND_PCMCIA is not set
-CONFIG_SND_SOC=y
-CONFIG_SND_SOC_AU1XPSC=y
-CONFIG_SND_SOC_DB1200=y
-CONFIG_HIDRAW=y
-CONFIG_USB_HIDDEV=y
-CONFIG_USB=y
-CONFIG_USB_DEBUG=y
-CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
-# CONFIG_USB_DEVICE_CLASS is not set
-CONFIG_USB_DYNAMIC_MINORS=y
-CONFIG_USB_EHCI_HCD=y
-CONFIG_USB_EHCI_ROOT_HUB_TT=y
-CONFIG_USB_OHCI_HCD=y
-CONFIG_MMC=y
-# CONFIG_MMC_BLOCK_BOUNCE is not set
-CONFIG_MMC_AU1X=y
-CONFIG_NEW_LEDS=y
-CONFIG_LEDS_CLASS=y
-CONFIG_LEDS_TRIGGERS=y
-CONFIG_RTC_CLASS=y
-CONFIG_RTC_DRV_AU1XXX=y
-CONFIG_EXT2_FS=y
-CONFIG_ISO9660_FS=y
-CONFIG_JOLIET=y
-CONFIG_ZISOFS=y
-CONFIG_UDF_FS=y
-CONFIG_VFAT_FS=y
-# CONFIG_PROC_PAGE_MONITOR is not set
-CONFIG_TMPFS=y
-CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_SUMMARY=y
-CONFIG_JFFS2_COMPRESSION_OPTIONS=y
-CONFIG_JFFS2_LZO=y
-CONFIG_JFFS2_RUBIN=y
-CONFIG_SQUASHFS=y
-CONFIG_NFS_FS=y
-CONFIG_NFS_V3=y
-CONFIG_ROOT_NFS=y
-CONFIG_PARTITION_ADVANCED=y
-CONFIG_EFI_PARTITION=y
-CONFIG_NLS_CODEPAGE_437=y
-CONFIG_NLS_CODEPAGE_850=y
-CONFIG_NLS_CODEPAGE_852=y
-CONFIG_NLS_CODEPAGE_1250=y
-CONFIG_NLS_ASCII=y
-CONFIG_NLS_ISO8859_1=y
-CONFIG_NLS_ISO8859_2=y
-CONFIG_NLS_ISO8859_15=y
-CONFIG_NLS_UTF8=y
-# CONFIG_ENABLE_WARN_DEPRECATED is not set
-# CONFIG_ENABLE_MUST_CHECK is not set
-CONFIG_MAGIC_SYSRQ=y
-CONFIG_STRIP_ASM_SYMS=y
-CONFIG_DEBUG_KERNEL=y
-# CONFIG_SCHED_DEBUG is not set
-# CONFIG_FTRACE is not set
-CONFIG_CMDLINE_BOOL=y
-CONFIG_CMDLINE="console=ttyS0,115200"
-CONFIG_DEBUG_ZBOOT=y
-CONFIG_KEYS=y
-CONFIG_KEYS_DEBUG_PROC_KEYS=y
-CONFIG_SECURITYFS=y

arch/mips/include/asm/cpu.h

@@ -169,6 +169,7 @@
 #define PRID_IMP_NETLOGIC_XLS412B	0x4c00
 #define PRID_IMP_NETLOGIC_XLS408B	0x4e00
 #define PRID_IMP_NETLOGIC_XLS404B	0x4f00
+#define PRID_IMP_NETLOGIC_AU13XX	0x8000
 
 /*
  * Definitions for 7:0 on legacy processors

arch/mips/include/asm/mach-au1x00/au1000.h

@@ -136,6 +136,7 @@ static inline int au1xxx_cpu_needs_config_od(void)
 #define ALCHEMY_CPU_AU1100	2
 #define ALCHEMY_CPU_AU1550	3
 #define ALCHEMY_CPU_AU1200	4
+#define ALCHEMY_CPU_AU1300	5
 
 static inline int alchemy_get_cputype(void)
 {
@@ -156,6 +157,9 @@ static inline int alchemy_get_cputype(void)
 	case 0x05030000:
 		return ALCHEMY_CPU_AU1200;
 		break;
+	case 0x800c0000:
+		return ALCHEMY_CPU_AU1300;
+		break;
 	}
 
 	return ALCHEMY_CPU_UNKNOWN;
@@ -166,6 +170,7 @@ static inline int alchemy_get_uarts(int type)
 {
 	switch (type) {
 	case ALCHEMY_CPU_AU1000:
+	case ALCHEMY_CPU_AU1300:
 		return 4;
 	case ALCHEMY_CPU_AU1500:
 	case ALCHEMY_CPU_AU1200:
@@ -243,6 +248,7 @@ extern unsigned long au1xxx_calc_clock(void);
 /* PM: arch/mips/alchemy/common/sleeper.S, power.c, irq.c */
 void alchemy_sleep_au1000(void);
 void alchemy_sleep_au1550(void);
+void alchemy_sleep_au1300(void);
 void au_sleep(void);
 
 /* USB: drivers/usb/host/alchemy-common.c */
@@ -251,6 +257,7 @@ enum alchemy_usb_block {
 	ALCHEMY_USB_UDC0,
 	ALCHEMY_USB_EHCI0,
 	ALCHEMY_USB_OTG0,
+	ALCHEMY_USB_OHCI1,
 };
 int alchemy_usb_control(int block, int enable);
 
@@ -263,14 +270,92 @@ struct alchemy_pci_platdata {
 	unsigned long pci_cfg_clr;
 };
 
-/* SOC Interrupt numbers */
+/* Multifunction pins: Each of these pins can either be assigned to the
+ * GPIO controller or a on-chip peripheral.
+ * Call "au1300_pinfunc_to_dev()" or "au1300_pinfunc_to_gpio()" to
+ * assign one of these to either the GPIO controller or the device.
+ */
+enum au1300_multifunc_pins {
+	/* wake-from-str pins 0-3 */
+	AU1300_PIN_WAKE0 = 0, AU1300_PIN_WAKE1, AU1300_PIN_WAKE2,
+	AU1300_PIN_WAKE3,
+	/* external clock sources for PSCs: 4-5 */
+	AU1300_PIN_EXTCLK0, AU1300_PIN_EXTCLK1,
+	/* 8bit MMC interface on SD0: 6-9 */
+	AU1300_PIN_SD0DAT4, AU1300_PIN_SD0DAT5, AU1300_PIN_SD0DAT6,
+	AU1300_PIN_SD0DAT7,
+	/* aux clk input for freqgen 3: 10 */
+	AU1300_PIN_FG3AUX,
+	/* UART1 pins: 11-18 */
+	AU1300_PIN_U1RI, AU1300_PIN_U1DCD, AU1300_PIN_U1DSR,
+	AU1300_PIN_U1CTS, AU1300_PIN_U1RTS, AU1300_PIN_U1DTR,
+	AU1300_PIN_U1RX, AU1300_PIN_U1TX,
+	/* UART0 pins: 19-24 */
+	AU1300_PIN_U0RI, AU1300_PIN_U0DCD, AU1300_PIN_U0DSR,
+	AU1300_PIN_U0CTS, AU1300_PIN_U0RTS, AU1300_PIN_U0DTR,
+	/* UART2: 25-26 */
+	AU1300_PIN_U2RX, AU1300_PIN_U2TX,
+	/* UART3: 27-28 */
+	AU1300_PIN_U3RX, AU1300_PIN_U3TX,
+	/* LCD controller PWMs, ext pixclock: 29-31 */
+	AU1300_PIN_LCDPWM0, AU1300_PIN_LCDPWM1, AU1300_PIN_LCDCLKIN,
+	/* SD1 interface: 32-37 */
+	AU1300_PIN_SD1DAT0, AU1300_PIN_SD1DAT1, AU1300_PIN_SD1DAT2,
+	AU1300_PIN_SD1DAT3, AU1300_PIN_SD1CMD, AU1300_PIN_SD1CLK,
+	/* SD2 interface: 38-43 */
+	AU1300_PIN_SD2DAT0, AU1300_PIN_SD2DAT1, AU1300_PIN_SD2DAT2,
+	AU1300_PIN_SD2DAT3, AU1300_PIN_SD2CMD, AU1300_PIN_SD2CLK,
+	/* PSC0/1 clocks: 44-45 */
+	AU1300_PIN_PSC0CLK, AU1300_PIN_PSC1CLK,
+	/* PSCs: 46-49/50-53/54-57/58-61 */
+	AU1300_PIN_PSC0SYNC0, AU1300_PIN_PSC0SYNC1, AU1300_PIN_PSC0D0,
+	AU1300_PIN_PSC0D1,
+	AU1300_PIN_PSC1SYNC0, AU1300_PIN_PSC1SYNC1, AU1300_PIN_PSC1D0,
+	AU1300_PIN_PSC1D1,
+	AU1300_PIN_PSC2SYNC0, AU1300_PIN_PSC2SYNC1, AU1300_PIN_PSC2D0,
+	AU1300_PIN_PSC2D1,
+	AU1300_PIN_PSC3SYNC0, AU1300_PIN_PSC3SYNC1, AU1300_PIN_PSC3D0,
+	AU1300_PIN_PSC3D1,
+	/* PCMCIA interface: 62-70 */
+	AU1300_PIN_PCE2, AU1300_PIN_PCE1, AU1300_PIN_PIOS16,
+	AU1300_PIN_PIOR, AU1300_PIN_PWE, AU1300_PIN_PWAIT,
+	AU1300_PIN_PREG, AU1300_PIN_POE, AU1300_PIN_PIOW,
+	/* camera interface H/V sync inputs: 71-72 */
+	AU1300_PIN_CIMLS, AU1300_PIN_CIMFS,
+	/* PSC2/3 clocks: 73-74 */
+	AU1300_PIN_PSC2CLK, AU1300_PIN_PSC3CLK,
+};
+
+/* GPIC (Au1300) pin management: arch/mips/alchemy/common/gpioint.c */
+extern void au1300_pinfunc_to_gpio(enum au1300_multifunc_pins gpio);
+extern void au1300_pinfunc_to_dev(enum au1300_multifunc_pins gpio);
+extern void au1300_set_irq_priority(unsigned int irq, int p);
+extern void au1300_set_dbdma_gpio(int dchan, unsigned int gpio);
+
+/* Au1300 allows to disconnect certain blocks from internal power supply */
+enum au1300_vss_block {
+	AU1300_VSS_MPE = 0,
+	AU1300_VSS_BSA,
+	AU1300_VSS_GPE,
+	AU1300_VSS_MGP,
+};
 
+extern void au1300_vss_block_control(int block, int enable);
+
+
+/* SOC Interrupt numbers */
+/* Au1000-style (IC0/1): 2 controllers with 32 sources each */
 #define AU1000_INTC0_INT_BASE	(MIPS_CPU_IRQ_BASE + 8)
 #define AU1000_INTC0_INT_LAST	(AU1000_INTC0_INT_BASE + 31)
 #define AU1000_INTC1_INT_BASE	(AU1000_INTC0_INT_LAST + 1)
 #define AU1000_INTC1_INT_LAST	(AU1000_INTC1_INT_BASE + 31)
 #define AU1000_MAX_INTR 	AU1000_INTC1_INT_LAST
 
+/* Au1300-style (GPIC): 1 controller with up to 128 sources */
+#define ALCHEMY_GPIC_INT_BASE	(MIPS_CPU_IRQ_BASE + 8)
+#define ALCHEMY_GPIC_INT_NUM	128
+#define ALCHEMY_GPIC_INT_LAST	(ALCHEMY_GPIC_INT_BASE + ALCHEMY_GPIC_INT_NUM - 1)
+
 enum soc_au1000_ints {
 	AU1000_FIRST_INT	= AU1000_INTC0_INT_BASE,
 	AU1000_UART0_INT	= AU1000_FIRST_INT,
@@ -591,24 +676,77 @@ enum soc_au1200_ints {
 
 #endif /* !defined (_LANGUAGE_ASSEMBLY) */
 
+/* Au1300 peripheral interrupt numbers */
+#define AU1300_FIRST_INT	(ALCHEMY_GPIC_INT_BASE)
+#define AU1300_UART1_INT	(AU1300_FIRST_INT + 17)
+#define AU1300_UART2_INT	(AU1300_FIRST_INT + 25)
+#define AU1300_UART3_INT	(AU1300_FIRST_INT + 27)
+#define AU1300_SD1_INT		(AU1300_FIRST_INT + 32)
+#define AU1300_SD2_INT		(AU1300_FIRST_INT + 38)
+#define AU1300_PSC0_INT		(AU1300_FIRST_INT + 48)
+#define AU1300_PSC1_INT		(AU1300_FIRST_INT + 52)
+#define AU1300_PSC2_INT		(AU1300_FIRST_INT + 56)
+#define AU1300_PSC3_INT		(AU1300_FIRST_INT + 60)
+#define AU1300_NAND_INT		(AU1300_FIRST_INT + 62)
+#define AU1300_DDMA_INT		(AU1300_FIRST_INT + 75)
+#define AU1300_MMU_INT		(AU1300_FIRST_INT + 76)
+#define AU1300_MPU_INT		(AU1300_FIRST_INT + 77)
+#define AU1300_GPU_INT		(AU1300_FIRST_INT + 78)
+#define AU1300_UDMA_INT		(AU1300_FIRST_INT + 79)
+#define AU1300_TOY_INT		(AU1300_FIRST_INT + 80)
+#define AU1300_TOY_MATCH0_INT	(AU1300_FIRST_INT + 81)
+#define AU1300_TOY_MATCH1_INT	(AU1300_FIRST_INT + 82)
+#define AU1300_TOY_MATCH2_INT	(AU1300_FIRST_INT + 83)
+#define AU1300_RTC_INT		(AU1300_FIRST_INT + 84)
+#define AU1300_RTC_MATCH0_INT	(AU1300_FIRST_INT + 85)
+#define AU1300_RTC_MATCH1_INT	(AU1300_FIRST_INT + 86)
+#define AU1300_RTC_MATCH2_INT	(AU1300_FIRST_INT + 87)
+#define AU1300_UART0_INT	(AU1300_FIRST_INT + 88)
+#define AU1300_SD0_INT		(AU1300_FIRST_INT + 89)
+#define AU1300_USB_INT		(AU1300_FIRST_INT + 90)
+#define AU1300_LCD_INT		(AU1300_FIRST_INT + 91)
+#define AU1300_BSA_INT		(AU1300_FIRST_INT + 92)
+#define AU1300_MPE_INT		(AU1300_FIRST_INT + 93)
+#define AU1300_ITE_INT		(AU1300_FIRST_INT + 94)
+#define AU1300_AES_INT		(AU1300_FIRST_INT + 95)
+#define AU1300_CIM_INT		(AU1300_FIRST_INT + 96)
+
+/**********************************************************************/
+
 /*
  * Physical base addresses for integrated peripherals
- * 0..au1000 1..au1500 2..au1100 3..au1550 4..au1200
+ * 0..au1000 1..au1500 2..au1100 3..au1550 4..au1200 5..au1300
  */
 
 #define AU1000_AC97_PHYS_ADDR		0x10000000 /* 012 */
+#define AU1300_ROM_PHYS_ADDR		0x10000000 /* 5 */
+#define AU1300_OTP_PHYS_ADDR		0x10002000 /* 5 */
+#define AU1300_VSS_PHYS_ADDR		0x10003000 /* 5 */
+#define AU1300_UART0_PHYS_ADDR		0x10100000 /* 5 */
+#define AU1300_UART1_PHYS_ADDR		0x10101000 /* 5 */
+#define AU1300_UART2_PHYS_ADDR		0x10102000 /* 5 */
+#define AU1300_UART3_PHYS_ADDR		0x10103000 /* 5 */
 #define AU1000_USB_OHCI_PHYS_ADDR	0x10100000 /* 012 */
 #define AU1000_USB_UDC_PHYS_ADDR	0x10200000 /* 0123 */
+#define AU1300_GPIC_PHYS_ADDR		0x10200000 /* 5 */
 #define AU1000_IRDA_PHYS_ADDR		0x10300000 /* 02 */
-#define AU1200_AES_PHYS_ADDR		0x10300000 /* 4 */
+#define AU1200_AES_PHYS_ADDR		0x10300000 /* 45 */
 #define AU1000_IC0_PHYS_ADDR		0x10400000 /* 01234 */
+#define AU1300_GPU_PHYS_ADDR		0x10500000 /* 5 */
 #define AU1000_MAC0_PHYS_ADDR		0x10500000 /* 023 */
 #define AU1000_MAC1_PHYS_ADDR		0x10510000 /* 023 */
 #define AU1000_MACEN_PHYS_ADDR		0x10520000 /* 023 */
-#define AU1100_SD0_PHYS_ADDR		0x10600000 /* 24 */
+#define AU1100_SD0_PHYS_ADDR		0x10600000 /* 245 */
+#define AU1300_SD1_PHYS_ADDR		0x10601000 /* 5 */
+#define AU1300_SD2_PHYS_ADDR		0x10602000 /* 5 */
 #define AU1100_SD1_PHYS_ADDR		0x10680000 /* 24 */
+#define AU1300_SYS_PHYS_ADDR		0x10900000 /* 5 */
 #define AU1550_PSC2_PHYS_ADDR		0x10A00000 /* 3 */
 #define AU1550_PSC3_PHYS_ADDR		0x10B00000 /* 3 */
+#define AU1300_PSC0_PHYS_ADDR		0x10A00000 /* 5 */
+#define AU1300_PSC1_PHYS_ADDR		0x10A01000 /* 5 */
+#define AU1300_PSC2_PHYS_ADDR		0x10A02000 /* 5 */
+#define AU1300_PSC3_PHYS_ADDR		0x10A03000 /* 5 */
 #define AU1000_I2S_PHYS_ADDR		0x11000000 /* 02 */
 #define AU1500_MAC0_PHYS_ADDR		0x11500000 /* 1 */
 #define AU1500_MAC1_PHYS_ADDR		0x11510000 /* 1 */
@@ -622,37 +760,96 @@ enum soc_au1200_ints {
 #define AU1000_SSI1_PHYS_ADDR		0x11680000 /* 02 */
 #define AU1500_GPIO2_PHYS_ADDR		0x11700000 /* 1234 */
 #define AU1000_IC1_PHYS_ADDR		0x11800000 /* 01234 */
-#define AU1000_SYS_PHYS_ADDR		0x11900000 /* 01234 */
+#define AU1000_SYS_PHYS_ADDR		0x11900000 /* 012345 */
 #define AU1550_PSC0_PHYS_ADDR		0x11A00000 /* 34 */
 #define AU1550_PSC1_PHYS_ADDR		0x11B00000 /* 34 */
 #define AU1000_MEM_PHYS_ADDR		0x14000000 /* 01234 */
 #define AU1000_STATIC_MEM_PHYS_ADDR	0x14001000 /* 01234 */
+#define AU1300_UDMA_PHYS_ADDR		0x14001800 /* 5 */
 #define AU1000_DMA_PHYS_ADDR		0x14002000 /* 012 */
-#define AU1550_DBDMA_PHYS_ADDR		0x14002000 /* 34 */
-#define AU1550_DBDMA_CONF_PHYS_ADDR	0x14003000 /* 34 */
+#define AU1550_DBDMA_PHYS_ADDR		0x14002000 /* 345 */
+#define AU1550_DBDMA_CONF_PHYS_ADDR	0x14003000 /* 345 */
 #define AU1000_MACDMA0_PHYS_ADDR	0x14004000 /* 0123 */
 #define AU1000_MACDMA1_PHYS_ADDR	0x14004200 /* 0123 */
-#define AU1200_CIM_PHYS_ADDR		0x14004000 /* 4 */
+#define AU1200_CIM_PHYS_ADDR		0x14004000 /* 45 */
 #define AU1500_PCI_PHYS_ADDR		0x14005000 /* 13 */
 #define AU1550_PE_PHYS_ADDR		0x14008000 /* 3 */
 #define AU1200_MAEBE_PHYS_ADDR		0x14010000 /* 4 */
 #define AU1200_MAEFE_PHYS_ADDR		0x14012000 /* 4 */
+#define AU1300_MAEITE_PHYS_ADDR		0x14010000 /* 5 */
+#define AU1300_MAEMPE_PHYS_ADDR		0x14014000 /* 5 */
 #define AU1550_USB_OHCI_PHYS_ADDR	0x14020000 /* 3 */
 #define AU1200_USB_CTL_PHYS_ADDR	0x14020000 /* 4 */
 #define AU1200_USB_OTG_PHYS_ADDR	0x14020020 /* 4 */
 #define AU1200_USB_OHCI_PHYS_ADDR	0x14020100 /* 4 */
 #define AU1200_USB_EHCI_PHYS_ADDR	0x14020200 /* 4 */
 #define AU1200_USB_UDC_PHYS_ADDR	0x14022000 /* 4 */
+#define AU1300_USB_EHCI_PHYS_ADDR	0x14020000 /* 5 */
+#define AU1300_USB_OHCI0_PHYS_ADDR	0x14020400 /* 5 */
+#define AU1300_USB_OHCI1_PHYS_ADDR	0x14020800 /* 5 */
+#define AU1300_USB_CTL_PHYS_ADDR	0x14021000 /* 5 */
+#define AU1300_USB_OTG_PHYS_ADDR	0x14022000 /* 5 */
+#define AU1300_MAEBSA_PHYS_ADDR		0x14030000 /* 5 */
 #define AU1100_LCD_PHYS_ADDR		0x15000000 /* 2 */
-#define AU1200_LCD_PHYS_ADDR		0x15000000 /* 4 */
+#define AU1200_LCD_PHYS_ADDR		0x15000000 /* 45 */
 #define AU1500_PCI_MEM_PHYS_ADDR	0x400000000ULL /* 13 */
 #define AU1500_PCI_IO_PHYS_ADDR		0x500000000ULL /* 13 */
 #define AU1500_PCI_CONFIG0_PHYS_ADDR	0x600000000ULL /* 13 */
 #define AU1500_PCI_CONFIG1_PHYS_ADDR	0x680000000ULL /* 13 */
-#define AU1000_PCMCIA_IO_PHYS_ADDR	0xF00000000ULL /* 01234 */
-#define AU1000_PCMCIA_ATTR_PHYS_ADDR	0xF40000000ULL /* 01234 */
-#define AU1000_PCMCIA_MEM_PHYS_ADDR	0xF80000000ULL /* 01234 */
+#define AU1000_PCMCIA_IO_PHYS_ADDR	0xF00000000ULL /* 012345 */
+#define AU1000_PCMCIA_ATTR_PHYS_ADDR	0xF40000000ULL /* 012345 */
+#define AU1000_PCMCIA_MEM_PHYS_ADDR	0xF80000000ULL /* 012345 */
 
+/**********************************************************************/
+
+
+/*
+ * Au1300 GPIO+INT controller (GPIC) register offsets and bits
+ * Registers are 128bits (0x10 bytes), divided into 4 "banks".
+ */
+#define AU1300_GPIC_PINVAL	0x0000
+#define AU1300_GPIC_PINVALCLR	0x0010
+#define AU1300_GPIC_IPEND	0x0020
+#define AU1300_GPIC_PRIENC	0x0030
+#define AU1300_GPIC_IEN		0x0040	/* int_mask in manual */
+#define AU1300_GPIC_IDIS	0x0050	/* int_maskclr in manual */
+#define AU1300_GPIC_DMASEL	0x0060
+#define AU1300_GPIC_DEVSEL	0x0080
+#define AU1300_GPIC_DEVCLR	0x0090
+#define AU1300_GPIC_RSTVAL	0x00a0
+/* pin configuration space. one 32bit register for up to 128 IRQs */
+#define AU1300_GPIC_PINCFG	0x1000
+
+#define GPIC_GPIO_TO_BIT(gpio)	\
+	(1 << ((gpio) & 0x1f))
+
+#define GPIC_GPIO_BANKOFF(gpio)	\
+	(((gpio) >> 5) * 4)
+
+/* Pin Control bits: who owns the pin, what does it do */
+#define GPIC_CFG_PC_GPIN		0
+#define GPIC_CFG_PC_DEV			1
+#define GPIC_CFG_PC_GPOLOW		2
+#define GPIC_CFG_PC_GPOHIGH		3
+#define GPIC_CFG_PC_MASK		3
+
+/* assign pin to MIPS IRQ line */
+#define GPIC_CFG_IL_SET(x)	(((x) & 3) << 2)
+#define GPIC_CFG_IL_MASK	(3 << 2)
+
+/* pin interrupt type setup */
+#define GPIC_CFG_IC_OFF		(0 << 4)
+#define GPIC_CFG_IC_LEVEL_LOW	(1 << 4)
+#define GPIC_CFG_IC_LEVEL_HIGH	(2 << 4)
+#define GPIC_CFG_IC_EDGE_FALL	(5 << 4)
+#define GPIC_CFG_IC_EDGE_RISE	(6 << 4)
+#define GPIC_CFG_IC_EDGE_BOTH	(7 << 4)
+#define GPIC_CFG_IC_MASK	(7 << 4)
+
+/* allow interrupt to wake cpu from 'wait' */
+#define GPIC_CFG_IDLEWAKE	(1 << 7)
+
+/***********************************************************************/
 
 /* Au1000 SDRAM memory controller register offsets */
 #define AU1000_MEM_SDMODE0		0x0000
@@ -1068,44 +1265,20 @@ enum soc_au1200_ints {
 #define SSI_ENABLE_CD		(1 << 1)
 #define SSI_ENABLE_E		(1 << 0)
 
-/* IrDA Controller */
-#define IRDA_BASE		0xB0300000
-#define IR_RING_PTR_STATUS	(IRDA_BASE + 0x00)
-#define IR_RING_BASE_ADDR_H	(IRDA_BASE + 0x04)
-#define IR_RING_BASE_ADDR_L	(IRDA_BASE + 0x08)
-#define IR_RING_SIZE		(IRDA_BASE + 0x0C)
-#define IR_RING_PROMPT		(IRDA_BASE + 0x10)
-#define IR_RING_ADDR_CMPR	(IRDA_BASE + 0x14)
-#define IR_INT_CLEAR		(IRDA_BASE + 0x18)
-#define IR_CONFIG_1		(IRDA_BASE + 0x20)
-#  define IR_RX_INVERT_LED	(1 << 0)
-#  define IR_TX_INVERT_LED	(1 << 1)
-#  define IR_ST 		(1 << 2)
-#  define IR_SF 		(1 << 3)
-#  define IR_SIR		(1 << 4)
-#  define IR_MIR		(1 << 5)
-#  define IR_FIR		(1 << 6)
-#  define IR_16CRC		(1 << 7)
-#  define IR_TD 		(1 << 8)
-#  define IR_RX_ALL		(1 << 9)
-#  define IR_DMA_ENABLE 	(1 << 10)
-#  define IR_RX_ENABLE		(1 << 11)
-#  define IR_TX_ENABLE		(1 << 12)
-#  define IR_LOOPBACK		(1 << 14)
-#  define IR_SIR_MODE		(IR_SIR | IR_DMA_ENABLE | \
-				 IR_RX_ALL | IR_RX_ENABLE | IR_SF | IR_16CRC)
-#define IR_SIR_FLAGS		(IRDA_BASE + 0x24)
-#define IR_ENABLE		(IRDA_BASE + 0x28)
-#  define IR_RX_STATUS		(1 << 9)
-#  define IR_TX_STATUS		(1 << 10)
-#define IR_READ_PHY_CONFIG	(IRDA_BASE + 0x2C)
-#define IR_WRITE_PHY_CONFIG	(IRDA_BASE + 0x30)
-#define IR_MAX_PKT_LEN		(IRDA_BASE + 0x34)
-#define IR_RX_BYTE_CNT		(IRDA_BASE + 0x38)
-#define IR_CONFIG_2		(IRDA_BASE + 0x3C)
-#  define IR_MODE_INV		(1 << 0)
-#  define IR_ONE_PIN		(1 << 1)
-#define IR_INTERFACE_CONFIG	(IRDA_BASE + 0x40)
+
+/*
+ * The IrDA peripheral has an IRFIRSEL pin, but on the DB/PB boards it's not
+ * used to select FIR/SIR mode on the transceiver but as a GPIO.  Instead a
+ * CPLD has to be told about the mode.
+ */
+#define AU1000_IRDA_PHY_MODE_OFF	0
+#define AU1000_IRDA_PHY_MODE_SIR	1
+#define AU1000_IRDA_PHY_MODE_FIR	2
+
+struct au1k_irda_platform_data {
+	void(*set_phy_mode)(int mode);
+};
+
 
 /* GPIO */
 #define SYS_PINFUNC		0xB190002C

arch/mips/include/asm/mach-au1x00/au1100_mmc.h

@@ -130,8 +130,10 @@ struct au1xmmc_platform_data {
 #define SD_CONFIG2_DF	(0x00000008)
 #define SD_CONFIG2_DC	(0x00000010)
 #define SD_CONFIG2_xx2	(0x000000e0)
+#define SD_CONFIG2_BB	(0x00000080)
 #define SD_CONFIG2_WB	(0x00000100)
 #define SD_CONFIG2_RW	(0x00000200)
+#define SD_CONFIG2_DP	(0x00000400)
 
 
 /*

arch/mips/include/asm/mach-au1x00/au1200fb.h

@@ -0,0 +1,14 @@
+/*
+ * platform data for au1200fb driver.
+ */
+
+#ifndef _AU1200FB_PLAT_H_
+#define _AU1200FB_PLAT_H_
+
+struct au1200fb_platdata {
+	int (*panel_index)(void);
+	int (*panel_init)(void);
+	int (*panel_shutdown)(void);
+};
+
+#endif

arch/mips/include/asm/mach-au1x00/au1550nd.h

@@ -0,0 +1,16 @@
+/*
+ * platform data for the Au1550 NAND driver
+ */
+
+#ifndef _AU1550ND_H_
+#define _AU1550ND_H_
+
+#include <linux/mtd/partitions.h>
+
+struct au1550nd_platdata {
+	struct mtd_partition *parts;
+	int num_parts;
+	int devwidth;	/* 0 = 8bit device, 1 = 16bit device */
+};
+
+#endif

arch/mips/include/asm/mach-au1x00/au1xxx_dbdma.h

@@ -183,6 +183,37 @@ typedef volatile struct au1xxx_ddma_desc {
 #define AU1200_DSCR_CMD0_PSC1_SYNC	25
 #define AU1200_DSCR_CMD0_CIM_SYNC	26
 
+#define AU1300_DSCR_CMD0_UART0_TX      0
+#define AU1300_DSCR_CMD0_UART0_RX      1
+#define AU1300_DSCR_CMD0_UART1_TX      2
+#define AU1300_DSCR_CMD0_UART1_RX      3
+#define AU1300_DSCR_CMD0_UART2_TX      4
+#define AU1300_DSCR_CMD0_UART2_RX      5
+#define AU1300_DSCR_CMD0_UART3_TX      6
+#define AU1300_DSCR_CMD0_UART3_RX      7
+#define AU1300_DSCR_CMD0_SDMS_TX0      8
+#define AU1300_DSCR_CMD0_SDMS_RX0      9
+#define AU1300_DSCR_CMD0_SDMS_TX1      10
+#define AU1300_DSCR_CMD0_SDMS_RX1      11
+#define AU1300_DSCR_CMD0_AES_TX        12
+#define AU1300_DSCR_CMD0_AES_RX        13
+#define AU1300_DSCR_CMD0_PSC0_TX       14
+#define AU1300_DSCR_CMD0_PSC0_RX       15
+#define AU1300_DSCR_CMD0_PSC1_TX       16
+#define AU1300_DSCR_CMD0_PSC1_RX       17
+#define AU1300_DSCR_CMD0_PSC2_TX       18
+#define AU1300_DSCR_CMD0_PSC2_RX       19
+#define AU1300_DSCR_CMD0_PSC3_TX       20
+#define AU1300_DSCR_CMD0_PSC3_RX       21
+#define AU1300_DSCR_CMD0_LCD           22
+#define AU1300_DSCR_CMD0_NAND_FLASH    23
+#define AU1300_DSCR_CMD0_SDMS_TX2      24
+#define AU1300_DSCR_CMD0_SDMS_RX2      25
+#define AU1300_DSCR_CMD0_CIM_SYNC      26
+#define AU1300_DSCR_CMD0_UDMA          27
+#define AU1300_DSCR_CMD0_DMA_REQ0      28
+#define AU1300_DSCR_CMD0_DMA_REQ1      29
+
 #define DSCR_CMD0_THROTTLE	30
 #define DSCR_CMD0_ALWAYS	31
 #define DSCR_NDEV_IDS		32

arch/mips/include/asm/mach-au1x00/cpu-feature-overrides.h

@@ -13,12 +13,14 @@
 #define cpu_has_4k_cache		1
 #define cpu_has_tx39_cache		0
 #define cpu_has_fpu			0
+#define cpu_has_32fpr			0
 #define cpu_has_counter			1
 #define cpu_has_watch			1
 #define cpu_has_divec			1
 #define cpu_has_vce			0
 #define cpu_has_cache_cdex_p		0
 #define cpu_has_cache_cdex_s		0
+#define cpu_has_prefetch		1
 #define cpu_has_mcheck			1
 #define cpu_has_ejtag			1
 #define cpu_has_llsc			1
@@ -29,6 +31,7 @@
 #define cpu_has_vtag_icache		0
 #define cpu_has_dc_aliases		0
 #define cpu_has_ic_fills_f_dc		1
+#define cpu_has_pindexed_dcache		0
 #define cpu_has_mips32r1		1
 #define cpu_has_mips32r2		0
 #define cpu_has_mips64r1		0

arch/mips/include/asm/mach-au1x00/gpio-au1300.h

@@ -0,0 +1,241 @@
+/*
+ * gpio-au1300.h -- GPIO control for Au1300 GPIC and compatibles.
+ *
+ * Copyright (c) 2009-2011 Manuel Lauss <manuel.lauss@googlemail.com>
+ */
+
+#ifndef _GPIO_AU1300_H_
+#define _GPIO_AU1300_H_
+
+#include <asm/addrspace.h>
+#include <asm/io.h>
+#include <asm/mach-au1x00/au1000.h>
+
+/* with the current GPIC design, up to 128 GPIOs are possible.
+ * The only implementation so far is in the Au1300, which has 75 externally
+ * available GPIOs.
+ */
+#define AU1300_GPIO_BASE	0
+#define AU1300_GPIO_NUM		75
+#define AU1300_GPIO_MAX		(AU1300_GPIO_BASE + AU1300_GPIO_NUM - 1)
+
+#define AU1300_GPIC_ADDR	\
+	(void __iomem *)KSEG1ADDR(AU1300_GPIC_PHYS_ADDR)
+
+static inline int au1300_gpio_get_value(unsigned int gpio)
+{
+	void __iomem *roff = AU1300_GPIC_ADDR;
+	int bit;
+
+	gpio -= AU1300_GPIO_BASE;
+	roff += GPIC_GPIO_BANKOFF(gpio);
+	bit = GPIC_GPIO_TO_BIT(gpio);
+	return __raw_readl(roff + AU1300_GPIC_PINVAL) & bit;
+}
+
+static inline int au1300_gpio_direction_input(unsigned int gpio)
+{
+	void __iomem *roff = AU1300_GPIC_ADDR;
+	unsigned long bit;
+
+	gpio -= AU1300_GPIO_BASE;
+
+	roff += GPIC_GPIO_BANKOFF(gpio);
+	bit = GPIC_GPIO_TO_BIT(gpio);
+	__raw_writel(bit, roff + AU1300_GPIC_DEVCLR);
+	wmb();
+
+	return 0;
+}
+
+static inline int au1300_gpio_set_value(unsigned int gpio, int v)
+{
+	void __iomem *roff = AU1300_GPIC_ADDR;
+	unsigned long bit;
+
+	gpio -= AU1300_GPIO_BASE;
+
+	roff += GPIC_GPIO_BANKOFF(gpio);
+	bit = GPIC_GPIO_TO_BIT(gpio);
+	__raw_writel(bit, roff + (v ? AU1300_GPIC_PINVAL
+				    : AU1300_GPIC_PINVALCLR));
+	wmb();
+
+	return 0;
+}
+
+static inline int au1300_gpio_direction_output(unsigned int gpio, int v)
+{
+	/* hw switches to output automatically */
+	return au1300_gpio_set_value(gpio, v);
+}
+
+static inline int au1300_gpio_to_irq(unsigned int gpio)
+{
+	return AU1300_FIRST_INT + (gpio - AU1300_GPIO_BASE);
+}
+
+static inline int au1300_irq_to_gpio(unsigned int irq)
+{
+	return (irq - AU1300_FIRST_INT) + AU1300_GPIO_BASE;
+}
+
+static inline int au1300_gpio_is_valid(unsigned int gpio)
+{
+	int ret;
+
+	switch (alchemy_get_cputype()) {
+	case ALCHEMY_CPU_AU1300:
+		ret = ((gpio >= AU1300_GPIO_BASE) && (gpio <= AU1300_GPIO_MAX));
+		break;
+	default:
+		ret = 0;
+	}
+	return ret;
+}
+
+static inline int au1300_gpio_cansleep(unsigned int gpio)
+{
+	return 0;
+}
+
+/* hardware remembers gpio 0-63 levels on powerup */
+static inline int au1300_gpio_getinitlvl(unsigned int gpio)
+{
+	void __iomem *roff = AU1300_GPIC_ADDR;
+	unsigned long v;
+
+	if (unlikely(gpio > 63))
+		return 0;
+	else if (gpio > 31) {
+		gpio -= 32;
+		roff += 4;
+	}
+
+	v = __raw_readl(roff + AU1300_GPIC_RSTVAL);
+	return (v >> gpio) & 1;
+}
+
+/**********************************************************************/
+
+/* Linux gpio framework integration.
+*
+* 4 use cases of Alchemy GPIOS:
+*(1) GPIOLIB=y, ALCHEMY_GPIO_INDIRECT=y:
+*	Board must register gpiochips.
+*(2) GPIOLIB=y, ALCHEMY_GPIO_INDIRECT=n:
+*	A gpiochip for the 75 GPIOs is registered.
+*
+*(3) GPIOLIB=n, ALCHEMY_GPIO_INDIRECT=y:
+*	the boards' gpio.h must provide	the linux gpio wrapper functions,
+*
+*(4) GPIOLIB=n, ALCHEMY_GPIO_INDIRECT=n:
+*	inlinable gpio functions are provided which enable access to the
+*	Au1300 gpios only by using the numbers straight out of the data-
+*	sheets.
+
+* Cases 1 and 3 are intended for boards which want to provide their own
+* GPIO namespace and -operations (i.e. for example you have 8 GPIOs
+* which are in part provided by spare Au1300 GPIO pins and in part by
+* an external FPGA but you still want them to be accssible in linux
+* as gpio0-7. The board can of course use the alchemy_gpioX_* functions
+* as required).
+*/
+
+#ifndef CONFIG_GPIOLIB
+
+#ifdef CONFIG_ALCHEMY_GPIOINT_AU1300
+
+#ifndef CONFIG_ALCHEMY_GPIO_INDIRECT	/* case (4) */
+
+static inline int gpio_direction_input(unsigned int gpio)
+{
+	return au1300_gpio_direction_input(gpio);
+}
+
+static inline int gpio_direction_output(unsigned int gpio, int v)
+{
+	return au1300_gpio_direction_output(gpio, v);
+}
+
+static inline int gpio_get_value(unsigned int gpio)
+{
+	return au1300_gpio_get_value(gpio);
+}
+
+static inline void gpio_set_value(unsigned int gpio, int v)
+{
+	au1300_gpio_set_value(gpio, v);
+}
+
+static inline int gpio_get_value_cansleep(unsigned gpio)
+{
+	return gpio_get_value(gpio);
+}
+
+static inline void gpio_set_value_cansleep(unsigned gpio, int value)
+{
+	gpio_set_value(gpio, value);
+}
+
+static inline int gpio_is_valid(unsigned int gpio)
+{
+	return au1300_gpio_is_valid(gpio);
+}
+
+static inline int gpio_cansleep(unsigned int gpio)
+{
+	return au1300_gpio_cansleep(gpio);
+}
+
+static inline int gpio_to_irq(unsigned int gpio)
+{
+	return au1300_gpio_to_irq(gpio);
+}
+
+static inline int irq_to_gpio(unsigned int irq)
+{
+	return au1300_irq_to_gpio(irq);
+}
+
+static inline int gpio_request(unsigned int gpio, const char *label)
+{
+	return 0;
+}
+
+static inline void gpio_free(unsigned int gpio)
+{
+}
+
+static inline int gpio_set_debounce(unsigned gpio, unsigned debounce)
+{
+	return -ENOSYS;
+}
+
+static inline void gpio_unexport(unsigned gpio)
+{
+}
+
+static inline int gpio_export(unsigned gpio, bool direction_may_change)
+{
+	return -ENOSYS;
+}
+
+static inline int gpio_sysfs_set_active_low(unsigned gpio, int value)
+{
+	return -ENOSYS;
+}
+
+static inline int gpio_export_link(struct device *dev, const char *name,
+				   unsigned gpio)
+{
+	return -ENOSYS;
+}
+
+#endif	/* !CONFIG_ALCHEMY_GPIO_INDIRECT */
+
+#endif	/* CONFIG_ALCHEMY_GPIOINT_AU1300 */
+
+#endif	/* CONFIG GPIOLIB */
+
+#endif /* _GPIO_AU1300_H_ */

arch/mips/include/asm/mach-au1x00/gpio.h

@@ -12,6 +12,7 @@
 
 #include <asm/mach-au1x00/au1000.h>
 #include <asm/mach-au1x00/gpio-au1000.h>
+#include <asm/mach-au1x00/gpio-au1300.h>
 
 /* On Au1000, Au1500 and Au1100 GPIOs won't work as inputs before
  * SYS_PININPUTEN is written to at least once.  On Au1550/Au1200/Au1300 this
@@ -58,6 +59,8 @@ static inline int __au_irq_to_gpio(unsigned int irq)
 	switch (alchemy_get_cputype()) {
 	case ALCHEMY_CPU_AU1000...ALCHEMY_CPU_AU1200:
 		return alchemy_irq_to_gpio(irq);
+	case ALCHEMY_CPU_AU1300:
+		return au1300_irq_to_gpio(irq);
 	}
 	return -EINVAL;
 }

arch/mips/include/asm/mach-db1x00/bcsr.h

@@ -34,6 +34,8 @@
 #define PB1200_BCSR_PHYS_ADDR	0x0D800000
 #define PB1200_BCSR_HEXLED_OFS	0x00400000
 
+#define DB1300_BCSR_PHYS_ADDR	0x19800000
+#define DB1300_BCSR_HEXLED_OFS	0x00400000
 
 enum bcsr_id {
 	/* BCSR base 1 */
@@ -105,6 +107,7 @@ enum bcsr_whoami_boards {
 	BCSR_WHOAMI_PB1200 = BCSR_WHOAMI_PB1200_DDR1,
 	BCSR_WHOAMI_PB1200_DDR2,
 	BCSR_WHOAMI_DB1200,
+	BCSR_WHOAMI_DB1300,
 };
 
 /* STATUS reg.  Unless otherwise noted, they're valid on all boards.
@@ -118,12 +121,12 @@ enum bcsr_whoami_boards {
 #define BCSR_STATUS_SRAMWIDTH		0x0080
 #define BCSR_STATUS_FLASHBUSY		0x0100
 #define BCSR_STATUS_ROMBUSY		0x0400
-#define BCSR_STATUS_SD0WP		0x0400	/* DB1200 */
+#define BCSR_STATUS_SD0WP		0x0400	/* DB1200/DB1300:SD1 */
 #define BCSR_STATUS_SD1WP		0x0800
 #define BCSR_STATUS_USBOTGID		0x0800	/* PB/DB1550 */
 #define BCSR_STATUS_DB1000_SWAPBOOT	0x2000
-#define BCSR_STATUS_DB1200_SWAPBOOT	0x0040	/* DB1200 */
-#define BCSR_STATUS_IDECBLID		0x0200	/* DB1200 */
+#define BCSR_STATUS_DB1200_SWAPBOOT	0x0040	/* DB1200/1300 */
+#define BCSR_STATUS_IDECBLID		0x0200	/* DB1200/1300 */
 #define BCSR_STATUS_DB1200_U0RXD	0x1000	/* DB1200 */
 #define BCSR_STATUS_DB1200_U1RXD	0x2000	/* DB1200 */
 #define BCSR_STATUS_FLASHDEN		0xC000
@@ -133,6 +136,11 @@ enum bcsr_whoami_boards {
 #define BCSR_STATUS_PB1550_U1RXD	0x2000	/* PB1550 */
 #define BCSR_STATUS_PB1550_U3RXD	0x8000	/* PB1550 */
 
+#define BCSR_STATUS_CFWP		0x4000	/* DB1300 */
+#define BCSR_STATUS_USBOCn		0x2000	/* DB1300 */
+#define BCSR_STATUS_OTGOCn		0x1000	/* DB1300 */
+#define BCSR_STATUS_DCDMARQ		0x0010	/* DB1300 */
+#define BCSR_STATUS_IDEDMARQ		0x0020	/* DB1300 */
 
 /* DB/PB1000,1100,1500,1550 */
 #define BCSR_RESETS_PHY0		0x0001
@@ -155,17 +163,17 @@ enum bcsr_whoami_boards {
 #define BCSR_BOARD_GPIO200RST		0x0400
 #define BCSR_BOARD_PCICLKOUT		0x0800
 #define BCSR_BOARD_PCICFG		0x1000
-#define BCSR_BOARD_SPISEL		0x4000	/* PB/DB1550 */
+#define BCSR_BOARD_SPISEL		0x2000	/* PB/DB1550 */
 #define BCSR_BOARD_SD0WP		0x4000	/* DB1100 */
 #define BCSR_BOARD_SD1WP		0x8000	/* DB1100 */
 
 
-/* DB/PB1200 */
+/* DB/PB1200/1300 */
 #define BCSR_RESETS_ETH			0x0001
 #define BCSR_RESETS_CAMERA		0x0002
 #define BCSR_RESETS_DC			0x0004
 #define BCSR_RESETS_IDE			0x0008
-#define BCSR_RESETS_TV			0x0010	/* DB1200 */
+#define BCSR_RESETS_TV			0x0010	/* DB1200/1300 */
 /* Not resets but in the same register */
 #define BCSR_RESETS_PWMR1MUX		0x0800	/* DB1200 */
 #define BCSR_RESETS_PB1200_WSCFSM	0x0800	/* PB1200 */
@@ -174,13 +182,22 @@ enum bcsr_whoami_boards {
 #define BCSR_RESETS_SPISEL		0x4000
 #define BCSR_RESETS_SD1MUX		0x8000	/* PB1200 */
 
+#define BCSR_RESETS_VDDQSHDN		0x0200	/* DB1300 */
+#define BCSR_RESETS_OTPPGM		0x0400	/* DB1300 */
+#define BCSR_RESETS_OTPSCLK		0x0800	/* DB1300 */
+#define BCSR_RESETS_OTPWRPROT		0x1000	/* DB1300 */
+#define BCSR_RESETS_OTPCSB		0x2000	/* DB1300 */
+#define BCSR_RESETS_OTGPWR		0x4000	/* DB1300 */
+#define BCSR_RESETS_USBHPWR		0x8000  /* DB1300 */
+
 #define BCSR_BOARD_LCDVEE		0x0001
 #define BCSR_BOARD_LCDVDD		0x0002
 #define BCSR_BOARD_LCDBL		0x0004
 #define BCSR_BOARD_CAMSNAP		0x0010
 #define BCSR_BOARD_CAMPWR		0x0020
 #define BCSR_BOARD_SD0PWR		0x0040
-
+#define BCSR_BOARD_CAMCS		0x0010	/* DB1300 */
+#define BCSR_BOARD_HDMI_DE		0x0040	/* DB1300 */
 
 #define BCSR_SWITCHES_DIP		0x00FF
 #define BCSR_SWITCHES_DIP_1		0x0080
@@ -214,7 +231,10 @@ enum bcsr_whoami_boards {
 #define BCSR_SYSTEM_RESET		0x8000	/* clear to reset */
 #define BCSR_SYSTEM_PWROFF		0x4000	/* set to power off */
 #define BCSR_SYSTEM_VDDI		0x001F	/* PB1xxx boards */
-
+#define BCSR_SYSTEM_DEBUGCSMASK		0x003F	/* DB1300 */
+#define BCSR_SYSTEM_UDMAMODE		0x0100	/* DB1300 */
+#define BCSR_SYSTEM_WAKEONIRQ		0x0200	/* DB1300 */
+#define BCSR_SYSTEM_VDDI1300		0x3C00	/* DB1300 */
 
 
 

arch/mips/include/asm/mach-db1x00/db1200.h

@@ -43,15 +43,20 @@
 #define BCSR_INT_PC1EJECT	0x0800
 #define BCSR_INT_SD0INSERT	0x1000
 #define BCSR_INT_SD0EJECT	0x2000
+#define BCSR_INT_SD1INSERT	0x4000
+#define BCSR_INT_SD1EJECT	0x8000
 
-#define IDE_PHYS_ADDR		0x18800000
 #define IDE_REG_SHIFT		5
 
-#define DB1200_IDE_PHYS_ADDR	IDE_PHYS_ADDR
+#define DB1200_IDE_PHYS_ADDR	0x18800000
 #define DB1200_IDE_PHYS_LEN	(16 << IDE_REG_SHIFT)
 #define DB1200_ETH_PHYS_ADDR	0x19000300
 #define DB1200_NAND_PHYS_ADDR	0x20000000
 
+#define PB1200_IDE_PHYS_ADDR	0x0C800000
+#define PB1200_ETH_PHYS_ADDR	0x0D000300
+#define PB1200_NAND_PHYS_ADDR	0x1C000000
+
 /*
  * External Interrupts for DBAu1200 as of 8/6/2004.
  * Bit positions in the CPLD registers can be calculated by taking
@@ -77,6 +82,8 @@ enum external_db1200_ints {
 	DB1200_PC1_EJECT_INT,
 	DB1200_SD0_INSERT_INT,
 	DB1200_SD0_EJECT_INT,
+	PB1200_SD1_INSERT_INT,
+	PB1200_SD1_EJECT_INT,
 
 	DB1200_INT_END		= DB1200_INT_BEGIN + 15,
 };

arch/mips/include/asm/mach-db1x00/db1300.h

@@ -0,0 +1,40 @@
+/*
+ * NetLogic DB1300 board constants
+ */
+
+#ifndef _DB1300_H_
+#define _DB1300_H_
+
+/* FPGA (external mux) interrupt sources */
+#define DB1300_FIRST_INT	(ALCHEMY_GPIC_INT_LAST + 1)
+#define DB1300_IDE_INT		(DB1300_FIRST_INT + 0)
+#define DB1300_ETH_INT		(DB1300_FIRST_INT + 1)
+#define DB1300_CF_INT		(DB1300_FIRST_INT + 2)
+#define DB1300_VIDEO_INT	(DB1300_FIRST_INT + 4)
+#define DB1300_HDMI_INT		(DB1300_FIRST_INT + 5)
+#define DB1300_DC_INT		(DB1300_FIRST_INT + 6)
+#define DB1300_FLASH_INT	(DB1300_FIRST_INT + 7)
+#define DB1300_CF_INSERT_INT	(DB1300_FIRST_INT + 8)
+#define DB1300_CF_EJECT_INT	(DB1300_FIRST_INT + 9)
+#define DB1300_AC97_INT		(DB1300_FIRST_INT + 10)
+#define DB1300_AC97_PEN_INT	(DB1300_FIRST_INT + 11)
+#define DB1300_SD1_INSERT_INT	(DB1300_FIRST_INT + 12)
+#define DB1300_SD1_EJECT_INT	(DB1300_FIRST_INT + 13)
+#define DB1300_OTG_VBUS_OC_INT	(DB1300_FIRST_INT + 14)
+#define DB1300_HOST_VBUS_OC_INT	(DB1300_FIRST_INT + 15)
+#define DB1300_LAST_INT		(DB1300_FIRST_INT + 15)
+
+/* SMSC9210 CS */
+#define DB1300_ETH_PHYS_ADDR	0x19000000
+#define DB1300_ETH_PHYS_END	0x197fffff
+
+/* ATA CS */
+#define DB1300_IDE_PHYS_ADDR	0x18800000
+#define DB1300_IDE_REG_SHIFT	5
+#define DB1300_IDE_PHYS_LEN	(16 << DB1300_IDE_REG_SHIFT)
+
+/* NAND CS */
+#define DB1300_NAND_PHYS_ADDR	0x20000000
+#define DB1300_NAND_PHYS_END	0x20000fff
+
+#endif	/* _DB1300_H_ */

arch/mips/include/asm/mach-db1x00/db1x00.h

@@ -1,79 +0,0 @@
-/*
- * AMD Alchemy DBAu1x00 Reference Boards
- *
- * Copyright 2001, 2008 MontaVista Software Inc.
- * Author: MontaVista Software, Inc. <source@mvista.com>
- * Copyright (C) 2005 Ralf Baechle (ralf@linux-mips.org)
- *
- * ########################################################################
- *
- *  This program is free software; you can distribute it and/or modify it
- *  under the terms of the GNU General Public License (Version 2) as
- *  published by the Free Software Foundation.
- *
- *  This program is distributed in the hope it will be useful, but WITHOUT
- *  ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- *  FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
- *  for more details.
- *
- *  You should have received a copy of the GNU General Public License along
- *  with this program; if not, write to the Free Software Foundation, Inc.,
- *  59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
- *
- * ########################################################################
- *
- *
- */
-#ifndef __ASM_DB1X00_H
-#define __ASM_DB1X00_H
-
-#include <asm/mach-au1x00/au1xxx_psc.h>
-
-#ifdef CONFIG_MIPS_DB1550
-
-#define DBDMA_AC97_TX_CHAN	AU1550_DSCR_CMD0_PSC1_TX
-#define DBDMA_AC97_RX_CHAN	AU1550_DSCR_CMD0_PSC1_RX
-#define DBDMA_I2S_TX_CHAN	AU1550_DSCR_CMD0_PSC3_TX
-#define DBDMA_I2S_RX_CHAN	AU1550_DSCR_CMD0_PSC3_RX
-
-#define SPI_PSC_BASE		AU1550_PSC0_PHYS_ADDR
-#define AC97_PSC_BASE		AU1550_PSC1_PHYS_ADDR
-#define SMBUS_PSC_BASE		AU1550_PSC2_PHYS_ADDR
-#define I2S_PSC_BASE		AU1550_PSC3_PHYS_ADDR
-
-#define NAND_PHYS_ADDR		0x20000000
-
-#endif
-
-/*
- * NAND defines
- *
- * Timing values as described in databook, * ns value stripped of the
- * lower 2 bits.
- * These defines are here rather than an Au1550 generic file because
- * the parts chosen on another board may be different and may require
- * different timings.
- */
-#define NAND_T_H		(18 >> 2)
-#define NAND_T_PUL		(30 >> 2)
-#define NAND_T_SU		(30 >> 2)
-#define NAND_T_WH		(30 >> 2)
-
-/* Bitfield shift amounts */
-#define NAND_T_H_SHIFT		0
-#define NAND_T_PUL_SHIFT	4
-#define NAND_T_SU_SHIFT		8
-#define NAND_T_WH_SHIFT		12
-
-#define NAND_TIMING	(((NAND_T_H   & 0xF) << NAND_T_H_SHIFT)   | \
-			 ((NAND_T_PUL & 0xF) << NAND_T_PUL_SHIFT) | \
-			 ((NAND_T_SU  & 0xF) << NAND_T_SU_SHIFT)  | \
-			 ((NAND_T_WH  & 0xF) << NAND_T_WH_SHIFT))
-#define NAND_CS 	1
-
-/* Should be done by YAMON */
-#define NAND_STCFG	0x00400005 /* 8-bit NAND */
-#define NAND_STTIME	0x00007774 /* valid for 396 MHz SD=2 only */
-#define NAND_STADDR	0x12000FFF /* physical address 0x20000000 */
-
-#endif /* __ASM_DB1X00_H */

arch/mips/include/asm/mach-db1x00/irq.h

@@ -0,0 +1,23 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2003 by Ralf Baechle
+ */
+#ifndef __ASM_MACH_GENERIC_IRQ_H
+#define __ASM_MACH_GENERIC_IRQ_H
+
+
+#ifdef NR_IRQS
+#undef NR_IRQS
+#endif
+
+#ifndef MIPS_CPU_IRQ_BASE
+#define MIPS_CPU_IRQ_BASE 0
+#endif
+
+/* 8 (MIPS) + 128 (au1300) + 16 (cpld) */
+#define NR_IRQS 152
+
+#endif /* __ASM_MACH_GENERIC_IRQ_H */

arch/mips/include/asm/mach-pb1x00/mc146818rtc.h

@@ -1,34 +0,0 @@
-/*
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- * Copyright (C) 1998, 2001, 03 by Ralf Baechle
- *
- * RTC routines for PC style attached Dallas chip.
- */
-#ifndef __ASM_MACH_AU1XX_MC146818RTC_H
-#define __ASM_MACH_AU1XX_MC146818RTC_H
-
-#include <asm/io.h>
-#include <asm/mach-au1x00/au1000.h>
-
-#define RTC_PORT(x)	(0x0c000000 + (x))
-#define RTC_IRQ		8
-#define PB1500_RTC_ADDR 0x0c000000
-
-static inline unsigned char CMOS_READ(unsigned long offset)
-{
-	offset <<= 2;
-	return (u8)(au_readl(offset + PB1500_RTC_ADDR) & 0xff);
-}
-
-static inline void CMOS_WRITE(unsigned char data, unsigned long offset)
-{
-	offset <<= 2;
-	au_writel(data, offset + PB1500_RTC_ADDR);
-}
-
-#define RTC_ALWAYS_BCD	1
-
-#endif /* __ASM_MACH_AU1XX_MC146818RTC_H */

arch/mips/include/asm/mach-pb1x00/pb1000.h

@@ -1,87 +0,0 @@
-/*
- * Alchemy Semi Pb1000 Reference Board
- *
- * Copyright 2001, 2008 MontaVista Software Inc.
- * Author: MontaVista Software, Inc. <source@mvista.com>
- *
- * ########################################################################
- *
- *  This program is free software; you can distribute it and/or modify it
- *  under the terms of the GNU General Public License (Version 2) as
- *  published by the Free Software Foundation.
- *
- *  This program is distributed in the hope it will be useful, but WITHOUT
- *  ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- *  FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
- *  for more details.
- *
- *  You should have received a copy of the GNU General Public License along
- *  with this program; if not, write to the Free Software Foundation, Inc.,
- *  59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
- *
- * ########################################################################
- *
- *
- */
-#ifndef __ASM_PB1000_H
-#define __ASM_PB1000_H
-
-/* PCMCIA PB1000 specific defines */
-#define PCMCIA_MAX_SOCK  1
-#define PCMCIA_NUM_SOCKS (PCMCIA_MAX_SOCK + 1)
-
-#define PB1000_PCR		0xBE000000
-#  define PCR_SLOT_0_VPP0	(1 << 0)
-#  define PCR_SLOT_0_VPP1	(1 << 1)
-#  define PCR_SLOT_0_VCC0	(1 << 2)
-#  define PCR_SLOT_0_VCC1	(1 << 3)
-#  define PCR_SLOT_0_RST	(1 << 4)
-#  define PCR_SLOT_1_VPP0	(1 << 8)
-#  define PCR_SLOT_1_VPP1	(1 << 9)
-#  define PCR_SLOT_1_VCC0	(1 << 10)
-#  define PCR_SLOT_1_VCC1	(1 << 11)
-#  define PCR_SLOT_1_RST	(1 << 12)
-
-#define PB1000_MDR		0xBE000004
-#  define MDR_PI		(1 << 5)	/* PCMCIA int latch  */
-#  define MDR_EPI		(1 << 14)	/* enable PCMCIA int */
-#  define MDR_CPI		(1 << 15)	/* clear  PCMCIA int  */
-
-#define PB1000_ACR1		0xBE000008
-#  define ACR1_SLOT_0_CD1	(1 << 0)	/* card detect 1	*/
-#  define ACR1_SLOT_0_CD2	(1 << 1)	/* card detect 2	*/
-#  define ACR1_SLOT_0_READY	(1 << 2)	/* ready		*/
-#  define ACR1_SLOT_0_STATUS	(1 << 3)	/* status change	*/
-#  define ACR1_SLOT_0_VS1	(1 << 4)	/* voltage sense 1	*/
-#  define ACR1_SLOT_0_VS2	(1 << 5)	/* voltage sense 2	*/
-#  define ACR1_SLOT_0_INPACK	(1 << 6)	/* inpack pin status	*/
-#  define ACR1_SLOT_1_CD1	(1 << 8)	/* card detect 1	*/
-#  define ACR1_SLOT_1_CD2	(1 << 9)	/* card detect 2	*/
-#  define ACR1_SLOT_1_READY	(1 << 10)	/* ready		*/
-#  define ACR1_SLOT_1_STATUS	(1 << 11)	/* status change	*/
-#  define ACR1_SLOT_1_VS1	(1 << 12)	/* voltage sense 1	*/
-#  define ACR1_SLOT_1_VS2	(1 << 13)	/* voltage sense 2	*/
-#  define ACR1_SLOT_1_INPACK	(1 << 14)	/* inpack pin status	*/
-
-#define CPLD_AUX0		0xBE00000C
-#define CPLD_AUX1		0xBE000010
-#define CPLD_AUX2		0xBE000014
-
-/* Voltage levels */
-
-/* VPPEN1 - VPPEN0 */
-#define VPP_GND ((0 << 1) | (0 << 0))
-#define VPP_5V	((1 << 1) | (0 << 0))
-#define VPP_3V	((0 << 1) | (1 << 0))
-#define VPP_12V ((0 << 1) | (1 << 0))
-#define VPP_HIZ ((1 << 1) | (1 << 0))
-
-/* VCCEN1 - VCCEN0 */
-#define VCC_3V	((0 << 1) | (1 << 0))
-#define VCC_5V	((1 << 1) | (0 << 0))
-#define VCC_HIZ ((0 << 1) | (0 << 0))
-
-/* VPP/VCC */
-#define SET_VCC_VPP(VCC, VPP, SLOT) \
-	((((VCC) << 2) | ((VPP) << 0)) << ((SLOT) * 8))
-#endif /* __ASM_PB1000_H */

arch/mips/include/asm/mach-pb1x00/pb1200.h

@@ -1,139 +0,0 @@
-/*
- * AMD Alchemy Pb1200 Reference Board
- * Board Registers defines.
- *
- * ########################################################################
- *
- *  This program is free software; you can distribute it and/or modify it
- *  under the terms of the GNU General Public License (Version 2) as
- *  published by the Free Software Foundation.
- *
- *  This program is distributed in the hope it will be useful, but WITHOUT
- *  ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- *  FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
- *  for more details.
- *
- *  You should have received a copy of the GNU General Public License along
- *  with this program; if not, write to the Free Software Foundation, Inc.,
- *  59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
- *
- * ########################################################################
- *
- *
- */
-#ifndef __ASM_PB1200_H
-#define __ASM_PB1200_H
-
-#include <linux/types.h>
-#include <asm/mach-au1x00/au1000.h>
-#include <asm/mach-au1x00/au1xxx_psc.h>
-
-#define DBDMA_AC97_TX_CHAN	AU1200_DSCR_CMD0_PSC1_TX
-#define DBDMA_AC97_RX_CHAN	AU1200_DSCR_CMD0_PSC1_RX
-#define DBDMA_I2S_TX_CHAN	AU1200_DSCR_CMD0_PSC1_TX
-#define DBDMA_I2S_RX_CHAN	AU1200_DSCR_CMD0_PSC1_RX
-
-/*
- * SPI and SMB are muxed on the Pb1200 board.
- * Refer to board documentation.
- */
-#define SPI_PSC_BASE		AU1550_PSC0_PHYS_ADDR
-#define SMBUS_PSC_BASE		AU1550_PSC0_PHYS_ADDR
-/*
- * AC97 and I2S are muxed on the Pb1200 board.
- * Refer to board documentation.
- */
-#define AC97_PSC_BASE       AU1550_PSC1_PHYS_ADDR
-#define I2S_PSC_BASE	AU1550_PSC1_PHYS_ADDR
-
-
-#define BCSR_SYSTEM_VDDI	0x001F
-#define BCSR_SYSTEM_POWEROFF	0x4000
-#define BCSR_SYSTEM_RESET	0x8000
-
-/* Bit positions for the different interrupt sources */
-#define BCSR_INT_IDE		0x0001
-#define BCSR_INT_ETH		0x0002
-#define BCSR_INT_PC0		0x0004
-#define BCSR_INT_PC0STSCHG	0x0008
-#define BCSR_INT_PC1		0x0010
-#define BCSR_INT_PC1STSCHG	0x0020
-#define BCSR_INT_DC		0x0040
-#define BCSR_INT_FLASHBUSY	0x0080
-#define BCSR_INT_PC0INSERT	0x0100
-#define BCSR_INT_PC0EJECT	0x0200
-#define BCSR_INT_PC1INSERT	0x0400
-#define BCSR_INT_PC1EJECT	0x0800
-#define BCSR_INT_SD0INSERT	0x1000
-#define BCSR_INT_SD0EJECT	0x2000
-#define BCSR_INT_SD1INSERT	0x4000
-#define BCSR_INT_SD1EJECT	0x8000
-
-#define SMC91C111_PHYS_ADDR	0x0D000300
-#define SMC91C111_INT		PB1200_ETH_INT
-
-#define IDE_PHYS_ADDR		0x0C800000
-#define IDE_REG_SHIFT		5
-#define IDE_PHYS_LEN		(16 << IDE_REG_SHIFT)
-#define IDE_INT 		PB1200_IDE_INT
-
-#define NAND_PHYS_ADDR 	0x1C000000
-
-/*
- * Timing values as described in databook, * ns value stripped of
- * lower 2 bits.
- * These defines are here rather than an Au1200 generic file because
- * the parts chosen on another board may be different and may require
- * different timings.
- */
-#define NAND_T_H		(18 >> 2)
-#define NAND_T_PUL		(30 >> 2)
-#define NAND_T_SU		(30 >> 2)
-#define NAND_T_WH		(30 >> 2)
-
-/* Bitfield shift amounts */
-#define NAND_T_H_SHIFT		0
-#define NAND_T_PUL_SHIFT	4
-#define NAND_T_SU_SHIFT		8
-#define NAND_T_WH_SHIFT		12
-
-#define NAND_TIMING	(((NAND_T_H   & 0xF) << NAND_T_H_SHIFT)   | \
-			 ((NAND_T_PUL & 0xF) << NAND_T_PUL_SHIFT) | \
-			 ((NAND_T_SU  & 0xF) << NAND_T_SU_SHIFT)  | \
-			 ((NAND_T_WH  & 0xF) << NAND_T_WH_SHIFT))
-
-/*
- * External Interrupts for Pb1200 as of 8/6/2004.
- * Bit positions in the CPLD registers can be calculated by taking
- * the interrupt define and subtracting the PB1200_INT_BEGIN value.
- *
- *   Example: IDE bis pos is  = 64 - 64
- *            ETH bit pos is  = 65 - 64
- */
-enum external_pb1200_ints {
-	PB1200_INT_BEGIN	= AU1000_MAX_INTR + 1,
-
-	PB1200_IDE_INT		= PB1200_INT_BEGIN,
-	PB1200_ETH_INT,
-	PB1200_PC0_INT,
-	PB1200_PC0_STSCHG_INT,
-	PB1200_PC1_INT,
-	PB1200_PC1_STSCHG_INT,
-	PB1200_DC_INT,
-	PB1200_FLASHBUSY_INT,
-	PB1200_PC0_INSERT_INT,
-	PB1200_PC0_EJECT_INT,
-	PB1200_PC1_INSERT_INT,
-	PB1200_PC1_EJECT_INT,
-	PB1200_SD0_INSERT_INT,
-	PB1200_SD0_EJECT_INT,
-	PB1200_SD1_INSERT_INT,
-	PB1200_SD1_EJECT_INT,
-
-	PB1200_INT_END		= PB1200_INT_BEGIN + 15
-};
-
-/* NAND chip select */
-#define NAND_CS 1
-
-#endif /* __ASM_PB1200_H */

arch/mips/include/asm/mach-pb1x00/pb1550.h

@@ -1,73 +0,0 @@
-/*
- * AMD Alchemy Semi PB1550 Reference Board
- * Board Registers defines.
- *
- * Copyright 2004 Embedded Edge LLC.
- * Copyright 2005 Ralf Baechle (ralf@linux-mips.org)
- *
- * ########################################################################
- *
- *  This program is free software; you can distribute it and/or modify it
- *  under the terms of the GNU General Public License (Version 2) as
- *  published by the Free Software Foundation.
- *
- *  This program is distributed in the hope it will be useful, but WITHOUT
- *  ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- *  FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
- *  for more details.
- *
- *  You should have received a copy of the GNU General Public License along
- *  with this program; if not, write to the Free Software Foundation, Inc.,
- *  59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
- *
- * ########################################################################
- *
- *
- */
-#ifndef __ASM_PB1550_H
-#define __ASM_PB1550_H
-
-#include <linux/types.h>
-#include <asm/mach-au1x00/au1xxx_psc.h>
-
-#define DBDMA_AC97_TX_CHAN	AU1550_DSCR_CMD0_PSC1_TX
-#define DBDMA_AC97_RX_CHAN	AU1550_DSCR_CMD0_PSC1_RX
-#define DBDMA_I2S_TX_CHAN	AU1550_DSCR_CMD0_PSC3_TX
-#define DBDMA_I2S_RX_CHAN	AU1550_DSCR_CMD0_PSC3_RX
-
-#define SPI_PSC_BASE		AU1550_PSC0_PHYS_ADDR
-#define AC97_PSC_BASE		AU1550_PSC1_PHYS_ADDR
-#define SMBUS_PSC_BASE		AU1550_PSC2_PHYS_ADDR
-#define I2S_PSC_BASE		AU1550_PSC3_PHYS_ADDR
-
-/*
- * Timing values as described in databook, * ns value stripped of
- * lower 2 bits.
- * These defines are here rather than an SOC1550 generic file because
- * the parts chosen on another board may be different and may require
- * different timings.
- */
-#define NAND_T_H		(18 >> 2)
-#define NAND_T_PUL		(30 >> 2)
-#define NAND_T_SU		(30 >> 2)
-#define NAND_T_WH		(30 >> 2)
-
-/* Bitfield shift amounts */
-#define NAND_T_H_SHIFT		0
-#define NAND_T_PUL_SHIFT	4
-#define NAND_T_SU_SHIFT		8
-#define NAND_T_WH_SHIFT		12
-
-#define NAND_TIMING	(((NAND_T_H   & 0xF) << NAND_T_H_SHIFT)   | \
-			 ((NAND_T_PUL & 0xF) << NAND_T_PUL_SHIFT) | \
-			 ((NAND_T_SU  & 0xF) << NAND_T_SU_SHIFT)  | \
-			 ((NAND_T_WH  & 0xF) << NAND_T_WH_SHIFT))
-
-#define NAND_CS 1
-
-/* Should be done by YAMON */
-#define NAND_STCFG	0x00400005 /* 8-bit NAND */
-#define NAND_STTIME	0x00007774 /* valid for 396 MHz SD=2 only */
-#define NAND_STADDR	0x12000FFF /* physical address 0x20000000 */
-
-#endif /* __ASM_PB1550_H */

arch/mips/kernel/cpu-probe.c

@@ -1014,6 +1014,13 @@ static inline void cpu_probe_netlogic(struct cpuinfo_mips *c, int cpu)
 {
 	decode_configs(c);
 
+	if ((c->processor_id & 0xff00) == PRID_IMP_NETLOGIC_AU13XX) {
+		c->cputype = CPU_ALCHEMY;
+		__cpu_name[cpu] = "Au1300";
+		/* following stuff is not for Alchemy */
+		return;
+	}
+
 	c->options = (MIPS_CPU_TLB       |
 			MIPS_CPU_4KEX    |
 			MIPS_CPU_COUNTER |

drivers/i2c/busses/Kconfig

@@ -299,11 +299,11 @@ config I2C_AT91
 	  unless your system can cope with those limitations.
 
 config I2C_AU1550
-	tristate "Au1550/Au1200 SMBus interface"
+	tristate "Au1550/Au1200/Au1300 SMBus interface"
 	depends on MIPS_ALCHEMY
 	help
 	  If you say yes to this option, support will be included for the
-	  Au1550 and Au1200 SMBus interface.
+	  Au1550/Au1200/Au1300 SMBus interface.
 
 	  This driver can also be built as a module.  If so, the module
 	  will be called i2c-au1550.

drivers/mmc/host/au1xmmc.c

@@ -153,6 +153,7 @@ static inline int has_dbdma(void)
 {
 	switch (alchemy_get_cputype()) {
 	case ALCHEMY_CPU_AU1200:
+	case ALCHEMY_CPU_AU1300:
 		return 1;
 	default:
 		return 0;
@@ -768,11 +769,15 @@ static void au1xmmc_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
 
 	config2 = au_readl(HOST_CONFIG2(host));
 	switch (ios->bus_width) {
+	case MMC_BUS_WIDTH_8:
+		config2 |= SD_CONFIG2_BB;
+		break;
 	case MMC_BUS_WIDTH_4:
+		config2 &= ~SD_CONFIG2_BB;
 		config2 |= SD_CONFIG2_WB;
 		break;
 	case MMC_BUS_WIDTH_1:
-		config2 &= ~SD_CONFIG2_WB;
+		config2 &= ~(SD_CONFIG2_WB | SD_CONFIG2_BB);
 		break;
 	}
 	au_writel(config2, HOST_CONFIG2(host));
@@ -943,7 +948,7 @@ static int __devinit au1xmmc_probe(struct platform_device *pdev)
 	struct mmc_host *mmc;
 	struct au1xmmc_host *host;
 	struct resource *r;
-	int ret;
+	int ret, iflag;
 
 	mmc = mmc_alloc_host(sizeof(struct au1xmmc_host), &pdev->dev);
 	if (!mmc) {
@@ -982,37 +987,43 @@ static int __devinit au1xmmc_probe(struct platform_device *pdev)
 		dev_err(&pdev->dev, "no IRQ defined\n");
 		goto out3;
 	}
-
 	host->irq = r->start;
-	/* IRQ is shared among both SD controllers */
-	ret = request_irq(host->irq, au1xmmc_irq, IRQF_SHARED,
-			  DRIVER_NAME, host);
-	if (ret) {
-		dev_err(&pdev->dev, "cannot grab IRQ\n");
-		goto out3;
-	}
 
 	mmc->ops = &au1xmmc_ops;
 
 	mmc->f_min =   450000;
 	mmc->f_max = 24000000;
 
+	mmc->max_blk_size = 2048;
+	mmc->max_blk_count = 512;
+
+	mmc->ocr_avail = AU1XMMC_OCR;
+	mmc->caps = MMC_CAP_4_BIT_DATA | MMC_CAP_SDIO_IRQ;
+	mmc->max_segs = AU1XMMC_DESCRIPTOR_COUNT;
+
+	iflag = IRQF_SHARED;	/* Au1100/Au1200: one int for both ctrls */
+
 	switch (alchemy_get_cputype()) {
 	case ALCHEMY_CPU_AU1100:
 		mmc->max_seg_size = AU1100_MMC_DESCRIPTOR_SIZE;
-		mmc->max_segs = AU1XMMC_DESCRIPTOR_COUNT;
 		break;
 	case ALCHEMY_CPU_AU1200:
 		mmc->max_seg_size = AU1200_MMC_DESCRIPTOR_SIZE;
-		mmc->max_segs = AU1XMMC_DESCRIPTOR_COUNT;
+		break;
+	case ALCHEMY_CPU_AU1300:
+		iflag = 0;	/* nothing is shared */
+		mmc->max_seg_size = AU1200_MMC_DESCRIPTOR_SIZE;
+		mmc->f_max = 52000000;
+		if (host->ioarea->start == AU1100_SD0_PHYS_ADDR)
+			mmc->caps |= MMC_CAP_8_BIT_DATA;
 		break;
 	}
 
-	mmc->max_blk_size = 2048;
-	mmc->max_blk_count = 512;
-
-	mmc->ocr_avail = AU1XMMC_OCR;
-	mmc->caps = MMC_CAP_4_BIT_DATA | MMC_CAP_SDIO_IRQ;
+	ret = request_irq(host->irq, au1xmmc_irq, iflag, DRIVER_NAME, host);
+	if (ret) {
+		dev_err(&pdev->dev, "cannot grab IRQ\n");
+		goto out3;
+	}
 
 	host->status = HOST_S_IDLE;
 

drivers/mtd/nand/au1550nd.c

@@ -17,35 +17,19 @@
 #include <linux/mtd/mtd.h>
 #include <linux/mtd/nand.h>
 #include <linux/mtd/partitions.h>
+#include <linux/platform_device.h>
 #include <asm/io.h>
+#include <asm/mach-au1x00/au1000.h>
+#include <asm/mach-au1x00/au1550nd.h>
 
-#ifdef CONFIG_MIPS_PB1550
-#include <asm/mach-pb1x00/pb1550.h>
-#elif defined(CONFIG_MIPS_DB1550)
-#include <asm/mach-db1x00/db1x00.h>
-#endif
-#include <asm/mach-db1x00/bcsr.h>
 
-/*
- * MTD structure for NAND controller
- */
-static struct mtd_info *au1550_mtd = NULL;
-static void __iomem *p_nand;
-static int nand_width = 1;	/* default x8 */
-static void (*au1550_write_byte)(struct mtd_info *, u_char);
+struct au1550nd_ctx {
+	struct mtd_info info;
+	struct nand_chip chip;
 
-/*
- * Define partitions for flash device
- */
-static const struct mtd_partition partition_info[] = {
-	{
-	 .name = "NAND FS 0",
-	 .offset = 0,
-	 .size = 8 * 1024 * 1024},
-	{
-	 .name = "NAND FS 1",
-	 .offset = MTDPART_OFS_APPEND,
-	 .size = MTDPART_SIZ_FULL}
+	int cs;
+	void __iomem *base;
+	void (*write_byte)(struct mtd_info *, u_char);
 };
 
 /**
@@ -259,24 +243,25 @@ static int au_verify_buf16(struct mtd_info *mtd, const u_char *buf, int len)
 
 static void au1550_hwcontrol(struct mtd_info *mtd, int cmd)
 {
-	register struct nand_chip *this = mtd->priv;
+	struct au1550nd_ctx *ctx = container_of(mtd, struct au1550nd_ctx, info);
+	struct nand_chip *this = mtd->priv;
 
 	switch (cmd) {
 
 	case NAND_CTL_SETCLE:
-		this->IO_ADDR_W = p_nand + MEM_STNAND_CMD;
+		this->IO_ADDR_W = ctx->base + MEM_STNAND_CMD;
 		break;
 
 	case NAND_CTL_CLRCLE:
-		this->IO_ADDR_W = p_nand + MEM_STNAND_DATA;
+		this->IO_ADDR_W = ctx->base + MEM_STNAND_DATA;
 		break;
 
 	case NAND_CTL_SETALE:
-		this->IO_ADDR_W = p_nand + MEM_STNAND_ADDR;
+		this->IO_ADDR_W = ctx->base + MEM_STNAND_ADDR;
 		break;
 
 	case NAND_CTL_CLRALE:
-		this->IO_ADDR_W = p_nand + MEM_STNAND_DATA;
+		this->IO_ADDR_W = ctx->base + MEM_STNAND_DATA;
 		/* FIXME: Nobody knows why this is necessary,
 		 * but it works only that way */
 		udelay(1);
@@ -284,7 +269,7 @@ static void au1550_hwcontrol(struct mtd_info *mtd, int cmd)
 
 	case NAND_CTL_SETNCE:
 		/* assert (force assert) chip enable */
-		au_writel((1 << (4 + NAND_CS)), MEM_STNDCTL);
+		au_writel((1 << (4 + ctx->cs)), MEM_STNDCTL);
 		break;
 
 	case NAND_CTL_CLRNCE:
@@ -331,9 +316,10 @@ static void au1550_select_chip(struct mtd_info *mtd, int chip)
  */
 static void au1550_command(struct mtd_info *mtd, unsigned command, int column, int page_addr)
 {
-	register struct nand_chip *this = mtd->priv;
+	struct au1550nd_ctx *ctx = container_of(mtd, struct au1550nd_ctx, info);
+	struct nand_chip *this = mtd->priv;
 	int ce_override = 0, i;
-	ulong flags;
+	unsigned long flags = 0;
 
 	/* Begin command latch cycle */
 	au1550_hwcontrol(mtd, NAND_CTL_SETCLE);
@@ -354,9 +340,9 @@ static void au1550_command(struct mtd_info *mtd, unsigned command, int column, i
 			column -= 256;
 			readcmd = NAND_CMD_READ1;
 		}
-		au1550_write_byte(mtd, readcmd);
+		ctx->write_byte(mtd, readcmd);
 	}
-	au1550_write_byte(mtd, command);
+	ctx->write_byte(mtd, command);
 
 	/* Set ALE and clear CLE to start address cycle */
 	au1550_hwcontrol(mtd, NAND_CTL_CLRCLE);
@@ -369,10 +355,10 @@ static void au1550_command(struct mtd_info *mtd, unsigned command, int column, i
 			/* Adjust columns for 16 bit buswidth */
 			if (this->options & NAND_BUSWIDTH_16)
 				column >>= 1;
-			au1550_write_byte(mtd, column);
+			ctx->write_byte(mtd, column);
 		}
 		if (page_addr != -1) {
-			au1550_write_byte(mtd, (u8)(page_addr & 0xff));
+			ctx->write_byte(mtd, (u8)(page_addr & 0xff));
 
 			if (command == NAND_CMD_READ0 ||
 			    command == NAND_CMD_READ1 ||
@@ -390,11 +376,12 @@ static void au1550_command(struct mtd_info *mtd, unsigned command, int column, i
 				au1550_hwcontrol(mtd, NAND_CTL_SETNCE);
 			}
 
-			au1550_write_byte(mtd, (u8)(page_addr >> 8));
+			ctx->write_byte(mtd, (u8)(page_addr >> 8));
 
 			/* One more address cycle for devices > 32MiB */
 			if (this->chipsize > (32 << 20))
-				au1550_write_byte(mtd, (u8)((page_addr >> 16) & 0x0f));
+				ctx->write_byte(mtd,
+						((page_addr >> 16) & 0x0f));
 		}
 		/* Latch in address */
 		au1550_hwcontrol(mtd, NAND_CTL_CLRALE);
@@ -440,121 +427,79 @@ static void au1550_command(struct mtd_info *mtd, unsigned command, int column, i
 	while(!this->dev_ready(mtd));
 }
 
-
-/*
- * Main initialization routine
- */
-static int __init au1xxx_nand_init(void)
+static int __devinit find_nand_cs(unsigned long nand_base)
 {
-	struct nand_chip *this;
-	u16 boot_swapboot = 0;	/* default value */
-	int retval;
-	u32 mem_staddr;
-	u32 nand_phys;
-
-	/* Allocate memory for MTD device structure and private data */
-	au1550_mtd = kzalloc(sizeof(struct mtd_info) + sizeof(struct nand_chip), GFP_KERNEL);
-	if (!au1550_mtd) {
-		printk("Unable to allocate NAND MTD dev structure.\n");
-		return -ENOMEM;
-	}
-
-	/* Get pointer to private data */
-	this = (struct nand_chip *)(&au1550_mtd[1]);
-
-	/* Link the private data with the MTD structure */
-	au1550_mtd->priv = this;
-	au1550_mtd->owner = THIS_MODULE;
-
+	void __iomem *base =
+			(void __iomem *)KSEG1ADDR(AU1000_STATIC_MEM_PHYS_ADDR);
+	unsigned long addr, staddr, start, mask, end;
+	int i;
 
-	/* MEM_STNDCTL: disable ints, disable nand boot */
-	au_writel(0, MEM_STNDCTL);
+	for (i = 0; i < 4; i++) {
+		addr = 0x1000 + (i * 0x10);			/* CSx */
+		staddr = __raw_readl(base + addr + 0x08);	/* STADDRx */
+		/* figure out the decoded range of this CS */
+		start = (staddr << 4) & 0xfffc0000;
+		mask = (staddr << 18) & 0xfffc0000;
+		end = (start | (start - 1)) & ~(start ^ mask);
+		if ((nand_base >= start) && (nand_base < end))
+			return i;
+	}
 
-#ifdef CONFIG_MIPS_PB1550
-	/* set gpio206 high */
-	gpio_direction_input(206);
+	return -ENODEV;
+}
 
-	boot_swapboot = (au_readl(MEM_STSTAT) & (0x7 << 1)) | ((bcsr_read(BCSR_STATUS) >> 6) & 0x1);
+static int __devinit au1550nd_probe(struct platform_device *pdev)
+{
+	struct au1550nd_platdata *pd;
+	struct au1550nd_ctx *ctx;
+	struct nand_chip *this;
+	struct resource *r;
+	int ret, cs;
 
-	switch (boot_swapboot) {
-	case 0:
-	case 2:
-	case 8:
-	case 0xC:
-	case 0xD:
-		/* x16 NAND Flash */
-		nand_width = 0;
-		break;
-	case 1:
-	case 9:
-	case 3:
-	case 0xE:
-	case 0xF:
-		/* x8 NAND Flash */
-		nand_width = 1;
-		break;
-	default:
-		printk("Pb1550 NAND: bad boot:swap\n");
-		retval = -EINVAL;
-		goto outmem;
+	pd = pdev->dev.platform_data;
+	if (!pd) {
+		dev_err(&pdev->dev, "missing platform data\n");
+		return -ENODEV;
 	}
-#endif
-
-	/* Configure chip-select; normally done by boot code, e.g. YAMON */
-#ifdef NAND_STCFG
-	if (NAND_CS == 0) {
-		au_writel(NAND_STCFG,  MEM_STCFG0);
-		au_writel(NAND_STTIME, MEM_STTIME0);
-		au_writel(NAND_STADDR, MEM_STADDR0);
-	}
-	if (NAND_CS == 1) {
-		au_writel(NAND_STCFG,  MEM_STCFG1);
-		au_writel(NAND_STTIME, MEM_STTIME1);
-		au_writel(NAND_STADDR, MEM_STADDR1);
+
+	ctx = kzalloc(sizeof(*ctx), GFP_KERNEL);
+	if (!ctx) {
+		dev_err(&pdev->dev, "no memory for NAND context\n");
+		return -ENOMEM;
 	}
-	if (NAND_CS == 2) {
-		au_writel(NAND_STCFG,  MEM_STCFG2);
-		au_writel(NAND_STTIME, MEM_STTIME2);
-		au_writel(NAND_STADDR, MEM_STADDR2);
+
+	r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (!r) {
+		dev_err(&pdev->dev, "no NAND memory resource\n");
+		ret = -ENODEV;
+		goto out1;
 	}
-	if (NAND_CS == 3) {
-		au_writel(NAND_STCFG,  MEM_STCFG3);
-		au_writel(NAND_STTIME, MEM_STTIME3);
-		au_writel(NAND_STADDR, MEM_STADDR3);
+	if (request_mem_region(r->start, resource_size(r), "au1550-nand")) {
+		dev_err(&pdev->dev, "cannot claim NAND memory area\n");
+		ret = -ENOMEM;
+		goto out1;
 	}
-#endif
-
-	/* Locate NAND chip-select in order to determine NAND phys address */
-	mem_staddr = 0x00000000;
-	if (((au_readl(MEM_STCFG0) & 0x7) == 0x5) && (NAND_CS == 0))
-		mem_staddr = au_readl(MEM_STADDR0);
-	else if (((au_readl(MEM_STCFG1) & 0x7) == 0x5) && (NAND_CS == 1))
-		mem_staddr = au_readl(MEM_STADDR1);
-	else if (((au_readl(MEM_STCFG2) & 0x7) == 0x5) && (NAND_CS == 2))
-		mem_staddr = au_readl(MEM_STADDR2);
-	else if (((au_readl(MEM_STCFG3) & 0x7) == 0x5) && (NAND_CS == 3))
-		mem_staddr = au_readl(MEM_STADDR3);
-
-	if (mem_staddr == 0x00000000) {
-		printk("Au1xxx NAND: ERROR WITH NAND CHIP-SELECT\n");
-		kfree(au1550_mtd);
-		return 1;
+
+	ctx->base = ioremap_nocache(r->start, 0x1000);
+	if (!ctx->base) {
+		dev_err(&pdev->dev, "cannot remap NAND memory area\n");
+		ret = -ENODEV;
+		goto out2;
 	}
-	nand_phys = (mem_staddr << 4) & 0xFFFC0000;
 
-	p_nand = ioremap(nand_phys, 0x1000);
+	this = &ctx->chip;
+	ctx->info.priv = this;
+	ctx->info.owner = THIS_MODULE;
 
-	/* make controller and MTD agree */
-	if (NAND_CS == 0)
-		nand_width = au_readl(MEM_STCFG0) & (1 << 22);
-	if (NAND_CS == 1)
-		nand_width = au_readl(MEM_STCFG1) & (1 << 22);
-	if (NAND_CS == 2)
-		nand_width = au_readl(MEM_STCFG2) & (1 << 22);
-	if (NAND_CS == 3)
-		nand_width = au_readl(MEM_STCFG3) & (1 << 22);
+	/* figure out which CS# r->start belongs to */
+	cs = find_nand_cs(r->start);
+	if (cs < 0) {
+		dev_err(&pdev->dev, "cannot detect NAND chipselect\n");
+		ret = -ENODEV;
+		goto out3;
+	}
+	ctx->cs = cs;
 
-	/* Set address of hardware control function */
 	this->dev_ready = au1550_device_ready;
 	this->select_chip = au1550_select_chip;
 	this->cmdfunc = au1550_command;
@@ -565,54 +510,57 @@ static int __init au1xxx_nand_init(void)
 
 	this->options = NAND_NO_AUTOINCR;
 
-	if (!nand_width)
+	if (pd->devwidth)
 		this->options |= NAND_BUSWIDTH_16;
 
-	this->read_byte = (!nand_width) ? au_read_byte16 : au_read_byte;
-	au1550_write_byte = (!nand_width) ? au_write_byte16 : au_write_byte;
+	this->read_byte = (pd->devwidth) ? au_read_byte16 : au_read_byte;
+	ctx->write_byte = (pd->devwidth) ? au_write_byte16 : au_write_byte;
 	this->read_word = au_read_word;
-	this->write_buf = (!nand_width) ? au_write_buf16 : au_write_buf;
-	this->read_buf = (!nand_width) ? au_read_buf16 : au_read_buf;
-	this->verify_buf = (!nand_width) ? au_verify_buf16 : au_verify_buf;
-
-	/* Scan to find existence of the device */
-	if (nand_scan(au1550_mtd, 1)) {
-		retval = -ENXIO;
-		goto outio;
+	this->write_buf = (pd->devwidth) ? au_write_buf16 : au_write_buf;
+	this->read_buf = (pd->devwidth) ? au_read_buf16 : au_read_buf;
+	this->verify_buf = (pd->devwidth) ? au_verify_buf16 : au_verify_buf;
+
+	ret = nand_scan(&ctx->info, 1);
+	if (ret) {
+		dev_err(&pdev->dev, "NAND scan failed with %d\n", ret);
+		goto out3;
 	}
 
-	/* Register the partitions */
-	mtd_device_register(au1550_mtd, partition_info,
-			    ARRAY_SIZE(partition_info));
+	mtd_device_register(&ctx->info, pd->parts, pd->num_parts);
 
 	return 0;
 
- outio:
-	iounmap(p_nand);
-
- outmem:
-	kfree(au1550_mtd);
-	return retval;
+out3:
+	iounmap(ctx->base);
+out2:
+	release_mem_region(r->start, resource_size(r));
+out1:
+	kfree(ctx);
+	return ret;
 }
 
-module_init(au1xxx_nand_init);
-
-/*
- * Clean up routine
- */
-static void __exit au1550_cleanup(void)
+static int __devexit au1550nd_remove(struct platform_device *pdev)
 {
-	/* Release resources, unregister device */
-	nand_release(au1550_mtd);
+	struct au1550nd_ctx *ctx = platform_get_drvdata(pdev);
+	struct resource *r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
 
-	/* Free the MTD device structure */
-	kfree(au1550_mtd);
-
-	/* Unmap */
-	iounmap(p_nand);
+	nand_release(&ctx->info);
+	iounmap(ctx->base);
+	release_mem_region(r->start, 0x1000);
+	kfree(ctx);
+	return 0;
 }
 
-module_exit(au1550_cleanup);
+static struct platform_driver au1550nd_driver = {
+	.driver = {
+		.name	= "au1550-nand",
+		.owner	= THIS_MODULE,
+	},
+	.probe		= au1550nd_probe,
+	.remove		= __devexit_p(au1550nd_remove),
+};
+
+module_platform_driver(au1550nd_driver);
 
 MODULE_LICENSE("GPL");
 MODULE_AUTHOR("Embedded Edge, LLC");

drivers/net/irda/Kconfig

@@ -313,8 +313,12 @@ config TOSHIBA_FIR
 	  donauboe.
 
 config AU1000_FIR
-	tristate "Alchemy Au1000 SIR/FIR"
+	tristate "Alchemy IrDA SIR/FIR"
 	depends on IRDA && MIPS_ALCHEMY
+	help
+	  Say Y/M here to build suppor the the IrDA peripheral on the
+	  Alchemy Au1000 and Au1100 SoCs.
+	  Say M to build a module; it will be called au1k_ir.ko
 
 config SMC_IRCC_FIR
 	tristate "SMSC IrCC (EXPERIMENTAL)"

drivers/net/irda/au1000_ircc.h

@@ -1,125 +0,0 @@
-/*
- *
- * BRIEF MODULE DESCRIPTION
- *	Au1000 IrDA driver.
- *
- * Copyright 2001 MontaVista Software Inc.
- * Author: MontaVista Software, Inc.
- *         	ppopov@mvista.com or source@mvista.com
- *
- *  This program is free software; you can redistribute  it and/or modify it
- *  under  the terms of  the GNU General  Public License as published by the
- *  Free Software Foundation;  either version 2 of the  License, or (at your
- *  option) any later version.
- *
- *  THIS  SOFTWARE  IS PROVIDED   ``AS  IS'' AND   ANY  EXPRESS OR IMPLIED
- *  WARRANTIES,   INCLUDING, BUT NOT  LIMITED  TO, THE IMPLIED WARRANTIES OF
- *  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN
- *  NO  EVENT  SHALL   THE AUTHOR  BE    LIABLE FOR ANY   DIRECT, INDIRECT,
- *  INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- *  NOT LIMITED   TO, PROCUREMENT OF  SUBSTITUTE GOODS  OR SERVICES; LOSS OF
- *  USE, DATA,  OR PROFITS; OR  BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
- *  ANY THEORY OF LIABILITY, WHETHER IN  CONTRACT, STRICT LIABILITY, OR TORT
- *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
- *  THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- *  You should have received a copy of the  GNU General Public License along
- *  with this program; if not, write  to the Free Software Foundation, Inc.,
- *  675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#ifndef AU1000_IRCC_H
-#define AU1000_IRCC_H
-
-#include <linux/time.h>
-
-#include <linux/spinlock.h>
-#include <linux/pm.h>
-#include <asm/io.h>
-
-#define NUM_IR_IFF          1
-#define NUM_IR_DESC        64
-#define RING_SIZE_4       0x0
-#define RING_SIZE_16      0x3
-#define RING_SIZE_64      0xF
-#define MAX_NUM_IR_DESC    64
-#define MAX_BUF_SIZE     2048
-
-#define BPS_115200          0
-#define BPS_57600           1
-#define BPS_38400           2
-#define BPS_19200           5
-#define BPS_9600           11
-#define BPS_2400           47
-
-/* Ring descriptor flags */
-#define AU_OWN           (1<<7) /* tx,rx */
-
-#define IR_DIS_CRC       (1<<6) /* tx */
-#define IR_BAD_CRC       (1<<5) /* tx */
-#define IR_NEED_PULSE    (1<<4) /* tx */
-#define IR_FORCE_UNDER   (1<<3) /* tx */
-#define IR_DISABLE_TX    (1<<2) /* tx */
-#define IR_HW_UNDER      (1<<0) /* tx */
-#define IR_TX_ERROR      (IR_DIS_CRC|IR_BAD_CRC|IR_HW_UNDER)
-
-#define IR_PHY_ERROR     (1<<6) /* rx */
-#define IR_CRC_ERROR     (1<<5) /* rx */
-#define IR_MAX_LEN       (1<<4) /* rx */
-#define IR_FIFO_OVER     (1<<3) /* rx */
-#define IR_SIR_ERROR     (1<<2) /* rx */
-#define IR_RX_ERROR      (IR_PHY_ERROR|IR_CRC_ERROR| \
-		IR_MAX_LEN|IR_FIFO_OVER|IR_SIR_ERROR)
-
-typedef struct db_dest {
-	struct db_dest *pnext;
-	volatile u32 *vaddr;
-	dma_addr_t dma_addr;
-} db_dest_t;
-
-
-typedef struct ring_desc {
-	u8 count_0;               /* 7:0  */
-	u8 count_1;               /* 12:8 */
-	u8 reserved;
-	u8 flags;
-	u8 addr_0;                /* 7:0   */
-	u8 addr_1;                /* 15:8  */
-	u8 addr_2;                /* 23:16 */
-	u8 addr_3;                /* 31:24 */
-} ring_dest_t;
-
-
-/* Private data for each instance */
-struct au1k_private {
-
-	db_dest_t *pDBfree;
-	db_dest_t db[2*NUM_IR_DESC];
-	volatile ring_dest_t *rx_ring[NUM_IR_DESC];
-	volatile ring_dest_t *tx_ring[NUM_IR_DESC];
-	db_dest_t *rx_db_inuse[NUM_IR_DESC];
-	db_dest_t *tx_db_inuse[NUM_IR_DESC];
-	u32 rx_head;
-	u32 tx_head;
-	u32 tx_tail;
-	u32 tx_full;
-
-	iobuff_t rx_buff;
-
-	struct net_device *netdev;
-	
-	struct timeval stamp;
-	struct timeval now;
-	struct qos_info		qos;
-	struct irlap_cb		*irlap;
-	
-	u8 open;
-	u32 speed;
-	u32 newspeed;
-	
-	u32 intr_work_done; /* number of Rx and Tx pkts processed in the isr */
-	struct timer_list timer;
-
-	spinlock_t lock;           /* For serializing operations */
-};
-#endif /* AU1000_IRCC_H */

drivers/net/irda/au1k_ir.c

@@ -18,104 +18,220 @@
  *  with this program; if not, write to the Free Software Foundation, Inc.,
  *  59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
  */
-#include <linux/module.h>
-#include <linux/types.h>
+
 #include <linux/init.h>
-#include <linux/errno.h>
+#include <linux/module.h>
 #include <linux/netdevice.h>
-#include <linux/slab.h>
-#include <linux/rtnetlink.h>
 #include <linux/interrupt.h>
-#include <linux/pm.h>
-#include <linux/bitops.h>
-
-#include <asm/irq.h>
-#include <asm/io.h>
-#include <asm/au1000.h>
-#if defined(CONFIG_MIPS_PB1000) || defined(CONFIG_MIPS_PB1100)
-#include <asm/pb1000.h>
-#elif defined(CONFIG_MIPS_DB1000) || defined(CONFIG_MIPS_DB1100)
-#include <asm/db1x00.h>
-#include <asm/mach-db1x00/bcsr.h>
-#else 
-#error au1k_ir: unsupported board
-#endif
+#include <linux/platform_device.h>
+#include <linux/slab.h>
+#include <linux/time.h>
+#include <linux/types.h>
 
 #include <net/irda/irda.h>
 #include <net/irda/irmod.h>
 #include <net/irda/wrapper.h>
 #include <net/irda/irda_device.h>
-#include "au1000_ircc.h"
+#include <asm/mach-au1x00/au1000.h>
+
+/* registers */
+#define IR_RING_PTR_STATUS	0x00
+#define IR_RING_BASE_ADDR_H	0x04
+#define IR_RING_BASE_ADDR_L	0x08
+#define IR_RING_SIZE		0x0C
+#define IR_RING_PROMPT		0x10
+#define IR_RING_ADDR_CMPR	0x14
+#define IR_INT_CLEAR		0x18
+#define IR_CONFIG_1		0x20
+#define IR_SIR_FLAGS		0x24
+#define IR_STATUS		0x28
+#define IR_READ_PHY_CONFIG	0x2C
+#define IR_WRITE_PHY_CONFIG	0x30
+#define IR_MAX_PKT_LEN		0x34
+#define IR_RX_BYTE_CNT		0x38
+#define IR_CONFIG_2		0x3C
+#define IR_ENABLE		0x40
+
+/* Config1 */
+#define IR_RX_INVERT_LED	(1 << 0)
+#define IR_TX_INVERT_LED	(1 << 1)
+#define IR_ST			(1 << 2)
+#define IR_SF			(1 << 3)
+#define IR_SIR			(1 << 4)
+#define IR_MIR			(1 << 5)
+#define IR_FIR			(1 << 6)
+#define IR_16CRC		(1 << 7)
+#define IR_TD			(1 << 8)
+#define IR_RX_ALL		(1 << 9)
+#define IR_DMA_ENABLE		(1 << 10)
+#define IR_RX_ENABLE		(1 << 11)
+#define IR_TX_ENABLE		(1 << 12)
+#define IR_LOOPBACK		(1 << 14)
+#define IR_SIR_MODE		(IR_SIR | IR_DMA_ENABLE | \
+				 IR_RX_ALL | IR_RX_ENABLE | IR_SF | \
+				 IR_16CRC)
+
+/* ir_status */
+#define IR_RX_STATUS		(1 << 9)
+#define IR_TX_STATUS		(1 << 10)
+#define IR_PHYEN		(1 << 15)
+
+/* ir_write_phy_config */
+#define IR_BR(x)		(((x) & 0x3f) << 10)	/* baud rate */
+#define IR_PW(x)		(((x) & 0x1f) << 5)	/* pulse width */
+#define IR_P(x)			((x) & 0x1f)		/* preamble bits */
+
+/* Config2 */
+#define IR_MODE_INV		(1 << 0)
+#define IR_ONE_PIN		(1 << 1)
+#define IR_PHYCLK_40MHZ		(0 << 2)
+#define IR_PHYCLK_48MHZ		(1 << 2)
+#define IR_PHYCLK_56MHZ		(2 << 2)
+#define IR_PHYCLK_64MHZ		(3 << 2)
+#define IR_DP			(1 << 4)
+#define IR_DA			(1 << 5)
+#define IR_FLT_HIGH		(0 << 6)
+#define IR_FLT_MEDHI		(1 << 6)
+#define IR_FLT_MEDLO		(2 << 6)
+#define IR_FLT_LO		(3 << 6)
+#define IR_IEN			(1 << 8)
+
+/* ir_enable */
+#define IR_HC			(1 << 3)	/* divide SBUS clock by 2 */
+#define IR_CE			(1 << 2)	/* clock enable */
+#define IR_C			(1 << 1)	/* coherency bit */
+#define IR_BE			(1 << 0)	/* set in big endian mode */
+
+#define NUM_IR_DESC	64
+#define RING_SIZE_4	0x0
+#define RING_SIZE_16	0x3
+#define RING_SIZE_64	0xF
+#define MAX_NUM_IR_DESC	64
+#define MAX_BUF_SIZE	2048
+
+/* Ring descriptor flags */
+#define AU_OWN		(1 << 7) /* tx,rx */
+#define IR_DIS_CRC	(1 << 6) /* tx */
+#define IR_BAD_CRC	(1 << 5) /* tx */
+#define IR_NEED_PULSE	(1 << 4) /* tx */
+#define IR_FORCE_UNDER	(1 << 3) /* tx */
+#define IR_DISABLE_TX	(1 << 2) /* tx */
+#define IR_HW_UNDER	(1 << 0) /* tx */
+#define IR_TX_ERROR	(IR_DIS_CRC | IR_BAD_CRC | IR_HW_UNDER)
+
+#define IR_PHY_ERROR	(1 << 6) /* rx */
+#define IR_CRC_ERROR	(1 << 5) /* rx */
+#define IR_MAX_LEN	(1 << 4) /* rx */
+#define IR_FIFO_OVER	(1 << 3) /* rx */
+#define IR_SIR_ERROR	(1 << 2) /* rx */
+#define IR_RX_ERROR	(IR_PHY_ERROR | IR_CRC_ERROR | \
+			 IR_MAX_LEN | IR_FIFO_OVER | IR_SIR_ERROR)
+
+struct db_dest {
+	struct db_dest *pnext;
+	volatile u32 *vaddr;
+	dma_addr_t dma_addr;
+};
+
+struct ring_dest {
+	u8 count_0;	/* 7:0  */
+	u8 count_1;	/* 12:8 */
+	u8 reserved;
+	u8 flags;
+	u8 addr_0;	/* 7:0   */
+	u8 addr_1;	/* 15:8  */
+	u8 addr_2;	/* 23:16 */
+	u8 addr_3;	/* 31:24 */
+};
+
+/* Private data for each instance */
+struct au1k_private {
+	void __iomem *iobase;
+	int irq_rx, irq_tx;
+
+	struct db_dest *pDBfree;
+	struct db_dest db[2 * NUM_IR_DESC];
+	volatile struct ring_dest *rx_ring[NUM_IR_DESC];
+	volatile struct ring_dest *tx_ring[NUM_IR_DESC];
+	struct db_dest *rx_db_inuse[NUM_IR_DESC];
+	struct db_dest *tx_db_inuse[NUM_IR_DESC];
+	u32 rx_head;
+	u32 tx_head;
+	u32 tx_tail;
+	u32 tx_full;
+
+	iobuff_t rx_buff;
+
+	struct net_device *netdev;
+	struct timeval stamp;
+	struct timeval now;
+	struct qos_info qos;
+	struct irlap_cb *irlap;
+
+	u8 open;
+	u32 speed;
+	u32 newspeed;
 
-static int au1k_irda_net_init(struct net_device *);
-static int au1k_irda_start(struct net_device *);
-static int au1k_irda_stop(struct net_device *dev);
-static int au1k_irda_hard_xmit(struct sk_buff *, struct net_device *);
-static int au1k_irda_rx(struct net_device *);
-static void au1k_irda_interrupt(int, void *);
-static void au1k_tx_timeout(struct net_device *);
-static int au1k_irda_ioctl(struct net_device *, struct ifreq *, int);
-static int au1k_irda_set_speed(struct net_device *dev, int speed);
+	struct timer_list timer;
 
-static void *dma_alloc(size_t, dma_addr_t *);
-static void dma_free(void *, size_t);
+	struct resource *ioarea;
+	struct au1k_irda_platform_data *platdata;
+};
 
 static int qos_mtt_bits = 0x07;  /* 1 ms or more */
-static struct net_device *ir_devs[NUM_IR_IFF];
-static char version[] __devinitdata =
-    "au1k_ircc:1.2 ppopov@mvista.com\n";
 
 #define RUN_AT(x) (jiffies + (x))
 
-static DEFINE_SPINLOCK(ir_lock);
+static void au1k_irda_plat_set_phy_mode(struct au1k_private *p, int mode)
+{
+	if (p->platdata && p->platdata->set_phy_mode)
+		p->platdata->set_phy_mode(mode);
+}
 
-/*
- * IrDA peripheral bug. You have to read the register
- * twice to get the right value.
- */
-u32 read_ir_reg(u32 addr) 
-{ 
-	readl(addr);
-	return readl(addr);
+static inline unsigned long irda_read(struct au1k_private *p,
+				      unsigned long ofs)
+{
+	/*
+	* IrDA peripheral bug. You have to read the register
+	* twice to get the right value.
+	*/
+	(void)__raw_readl(p->iobase + ofs);
+	return __raw_readl(p->iobase + ofs);
 }
 
+static inline void irda_write(struct au1k_private *p, unsigned long ofs,
+			      unsigned long val)
+{
+	__raw_writel(val, p->iobase + ofs);
+	wmb();
+}
 
 /*
  * Buffer allocation/deallocation routines. The buffer descriptor returned
- * has the virtual and dma address of a buffer suitable for 
+ * has the virtual and dma address of a buffer suitable for
  * both, receive and transmit operations.
  */
-static db_dest_t *GetFreeDB(struct au1k_private *aup)
+static struct db_dest *GetFreeDB(struct au1k_private *aup)
 {
-	db_dest_t *pDB;
-	pDB = aup->pDBfree;
-
-	if (pDB) {
-		aup->pDBfree = pDB->pnext;
-	}
-	return pDB;
-}
+	struct db_dest *db;
+	db = aup->pDBfree;
 
-static void ReleaseDB(struct au1k_private *aup, db_dest_t *pDB)
-{
-	db_dest_t *pDBfree = aup->pDBfree;
-	if (pDBfree)
-		pDBfree->pnext = pDB;
-	aup->pDBfree = pDB;
+	if (db)
+		aup->pDBfree = db->pnext;
+	return db;
 }
 
-
 /*
   DMA memory allocation, derived from pci_alloc_consistent.
   However, the Au1000 data cache is coherent (when programmed
   so), therefore we return KSEG0 address, not KSEG1.
 */
-static void *dma_alloc(size_t size, dma_addr_t * dma_handle)
+static void *dma_alloc(size_t size, dma_addr_t *dma_handle)
 {
 	void *ret;
 	int gfp = GFP_ATOMIC | GFP_DMA;
 
-	ret = (void *) __get_free_pages(gfp, get_order(size));
+	ret = (void *)__get_free_pages(gfp, get_order(size));
 
 	if (ret != NULL) {
 		memset(ret, 0, size);
@@ -125,7 +241,6 @@ static void *dma_alloc(size_t size, dma_addr_t * dma_handle)
 	return ret;
 }
 
-
 static void dma_free(void *vaddr, size_t size)
 {
 	vaddr = (void *)KSEG0ADDR(vaddr);
@@ -133,206 +248,306 @@ static void dma_free(void *vaddr, size_t size)
 }
 
 
-static void 
-setup_hw_rings(struct au1k_private *aup, u32 rx_base, u32 tx_base)
+static void setup_hw_rings(struct au1k_private *aup, u32 rx_base, u32 tx_base)
 {
 	int i;
-	for (i=0; i<NUM_IR_DESC; i++) {
-		aup->rx_ring[i] = (volatile ring_dest_t *) 
-			(rx_base + sizeof(ring_dest_t)*i);
+	for (i = 0; i < NUM_IR_DESC; i++) {
+		aup->rx_ring[i] = (volatile struct ring_dest *)
+			(rx_base + sizeof(struct ring_dest) * i);
 	}
-	for (i=0; i<NUM_IR_DESC; i++) {
-		aup->tx_ring[i] = (volatile ring_dest_t *) 
-			(tx_base + sizeof(ring_dest_t)*i);
+	for (i = 0; i < NUM_IR_DESC; i++) {
+		aup->tx_ring[i] = (volatile struct ring_dest *)
+			(tx_base + sizeof(struct ring_dest) * i);
 	}
 }
 
-static int au1k_irda_init(void)
-{
-	static unsigned version_printed = 0;
-	struct au1k_private *aup;
-	struct net_device *dev;
-	int err;
-
-	if (version_printed++ == 0) printk(version);
-
-	dev = alloc_irdadev(sizeof(struct au1k_private));
-	if (!dev)
-		return -ENOMEM;
-
-	dev->irq = AU1000_IRDA_RX_INT; /* TX has its own interrupt */
-	err = au1k_irda_net_init(dev);
-	if (err)
-		goto out;
-	err = register_netdev(dev);
-	if (err)
-		goto out1;
-	ir_devs[0] = dev;
-	printk(KERN_INFO "IrDA: Registered device %s\n", dev->name);
-	return 0;
-
-out1:
-	aup = netdev_priv(dev);
-	dma_free((void *)aup->db[0].vaddr,
-		MAX_BUF_SIZE * 2*NUM_IR_DESC);
-	dma_free((void *)aup->rx_ring[0],
-		2 * MAX_NUM_IR_DESC*(sizeof(ring_dest_t)));
-	kfree(aup->rx_buff.head);
-out:
-	free_netdev(dev);
-	return err;
-}
-
 static int au1k_irda_init_iobuf(iobuff_t *io, int size)
 {
 	io->head = kmalloc(size, GFP_KERNEL);
 	if (io->head != NULL) {
-		io->truesize = size;
-		io->in_frame = FALSE;
-		io->state    = OUTSIDE_FRAME;
-		io->data     = io->head;
+		io->truesize	= size;
+		io->in_frame	= FALSE;
+		io->state	= OUTSIDE_FRAME;
+		io->data	= io->head;
 	}
 	return io->head ? 0 : -ENOMEM;
 }
 
-static const struct net_device_ops au1k_irda_netdev_ops = {
-	.ndo_open		= au1k_irda_start,
-	.ndo_stop		= au1k_irda_stop,
-	.ndo_start_xmit		= au1k_irda_hard_xmit,
-	.ndo_tx_timeout		= au1k_tx_timeout,
-	.ndo_do_ioctl		= au1k_irda_ioctl,
-};
-
-static int au1k_irda_net_init(struct net_device *dev)
+/*
+ * Set the IrDA communications speed.
+ */
+static int au1k_irda_set_speed(struct net_device *dev, int speed)
 {
 	struct au1k_private *aup = netdev_priv(dev);
-	int i, retval = 0, err;
-	db_dest_t *pDB, *pDBfree;
-	dma_addr_t temp;
+	volatile struct ring_dest *ptxd;
+	unsigned long control;
+	int ret = 0, timeout = 10, i;
 
-	err = au1k_irda_init_iobuf(&aup->rx_buff, 14384);
-	if (err)
-		goto out1;
+	if (speed == aup->speed)
+		return ret;
 
-	dev->netdev_ops = &au1k_irda_netdev_ops;
+	/* disable PHY first */
+	au1k_irda_plat_set_phy_mode(aup, AU1000_IRDA_PHY_MODE_OFF);
+	irda_write(aup, IR_STATUS, irda_read(aup, IR_STATUS) & ~IR_PHYEN);
 
-	irda_init_max_qos_capabilies(&aup->qos);
+	/* disable RX/TX */
+	irda_write(aup, IR_CONFIG_1,
+	    irda_read(aup, IR_CONFIG_1) & ~(IR_RX_ENABLE | IR_TX_ENABLE));
+	msleep(20);
+	while (irda_read(aup, IR_STATUS) & (IR_RX_STATUS | IR_TX_STATUS)) {
+		msleep(20);
+		if (!timeout--) {
+			printk(KERN_ERR "%s: rx/tx disable timeout\n",
+					dev->name);
+			break;
+		}
+	}
 
-	/* The only value we must override it the baudrate */
-	aup->qos.baud_rate.bits = IR_9600|IR_19200|IR_38400|IR_57600|
-		IR_115200|IR_576000 |(IR_4000000 << 8);
-	
-	aup->qos.min_turn_time.bits = qos_mtt_bits;
-	irda_qos_bits_to_value(&aup->qos);
+	/* disable DMA */
+	irda_write(aup, IR_CONFIG_1,
+		   irda_read(aup, IR_CONFIG_1) & ~IR_DMA_ENABLE);
+	msleep(20);
 
-	retval = -ENOMEM;
+	/* After we disable tx/rx. the index pointers go back to zero. */
+	aup->tx_head = aup->tx_tail = aup->rx_head = 0;
+	for (i = 0; i < NUM_IR_DESC; i++) {
+		ptxd = aup->tx_ring[i];
+		ptxd->flags = 0;
+		ptxd->count_0 = 0;
+		ptxd->count_1 = 0;
+	}
 
-	/* Tx ring follows rx ring + 512 bytes */
-	/* we need a 1k aligned buffer */
-	aup->rx_ring[0] = (ring_dest_t *)
-		dma_alloc(2*MAX_NUM_IR_DESC*(sizeof(ring_dest_t)), &temp);
-	if (!aup->rx_ring[0])
-		goto out2;
+	for (i = 0; i < NUM_IR_DESC; i++) {
+		ptxd = aup->rx_ring[i];
+		ptxd->count_0 = 0;
+		ptxd->count_1 = 0;
+		ptxd->flags = AU_OWN;
+	}
 
-	/* allocate the data buffers */
-	aup->db[0].vaddr = 
-		(void *)dma_alloc(MAX_BUF_SIZE * 2*NUM_IR_DESC, &temp);
-	if (!aup->db[0].vaddr)
-		goto out3;
+	if (speed == 4000000)
+		au1k_irda_plat_set_phy_mode(aup, AU1000_IRDA_PHY_MODE_FIR);
+	else
+		au1k_irda_plat_set_phy_mode(aup, AU1000_IRDA_PHY_MODE_SIR);
 
-	setup_hw_rings(aup, (u32)aup->rx_ring[0], (u32)aup->rx_ring[0] + 512);
+	switch (speed) {
+	case 9600:
+		irda_write(aup, IR_WRITE_PHY_CONFIG, IR_BR(11) | IR_PW(12));
+		irda_write(aup, IR_CONFIG_1, IR_SIR_MODE);
+		break;
+	case 19200:
+		irda_write(aup, IR_WRITE_PHY_CONFIG, IR_BR(5) | IR_PW(12));
+		irda_write(aup, IR_CONFIG_1, IR_SIR_MODE);
+		break;
+	case 38400:
+		irda_write(aup, IR_WRITE_PHY_CONFIG, IR_BR(2) | IR_PW(12));
+		irda_write(aup, IR_CONFIG_1, IR_SIR_MODE);
+		break;
+	case 57600:
+		irda_write(aup, IR_WRITE_PHY_CONFIG, IR_BR(1) | IR_PW(12));
+		irda_write(aup, IR_CONFIG_1, IR_SIR_MODE);
+		break;
+	case 115200:
+		irda_write(aup, IR_WRITE_PHY_CONFIG, IR_PW(12));
+		irda_write(aup, IR_CONFIG_1, IR_SIR_MODE);
+		break;
+	case 4000000:
+		irda_write(aup, IR_WRITE_PHY_CONFIG, IR_P(15));
+		irda_write(aup, IR_CONFIG_1, IR_FIR | IR_DMA_ENABLE |
+				IR_RX_ENABLE);
+		break;
+	default:
+		printk(KERN_ERR "%s unsupported speed %x\n", dev->name, speed);
+		ret = -EINVAL;
+		break;
+	}
 
-	pDBfree = NULL;
-	pDB = aup->db;
-	for (i=0; i<(2*NUM_IR_DESC); i++) {
-		pDB->pnext = pDBfree;
-		pDBfree = pDB;
-		pDB->vaddr = 
-			(u32 *)((unsigned)aup->db[0].vaddr + MAX_BUF_SIZE*i);
-		pDB->dma_addr = (dma_addr_t)virt_to_bus(pDB->vaddr);
-		pDB++;
+	aup->speed = speed;
+	irda_write(aup, IR_STATUS, irda_read(aup, IR_STATUS) | IR_PHYEN);
+
+	control = irda_read(aup, IR_STATUS);
+	irda_write(aup, IR_RING_PROMPT, 0);
+
+	if (control & (1 << 14)) {
+		printk(KERN_ERR "%s: configuration error\n", dev->name);
+	} else {
+		if (control & (1 << 11))
+			printk(KERN_DEBUG "%s Valid SIR config\n", dev->name);
+		if (control & (1 << 12))
+			printk(KERN_DEBUG "%s Valid MIR config\n", dev->name);
+		if (control & (1 << 13))
+			printk(KERN_DEBUG "%s Valid FIR config\n", dev->name);
+		if (control & (1 << 10))
+			printk(KERN_DEBUG "%s TX enabled\n", dev->name);
+		if (control & (1 << 9))
+			printk(KERN_DEBUG "%s RX enabled\n", dev->name);
 	}
-	aup->pDBfree = pDBfree;
 
-	/* attach a data buffer to each descriptor */
-	for (i=0; i<NUM_IR_DESC; i++) {
-		pDB = GetFreeDB(aup);
-		if (!pDB) goto out;
-		aup->rx_ring[i]->addr_0 = (u8)(pDB->dma_addr & 0xff);
-		aup->rx_ring[i]->addr_1 = (u8)((pDB->dma_addr>>8) & 0xff);
-		aup->rx_ring[i]->addr_2 = (u8)((pDB->dma_addr>>16) & 0xff);
-		aup->rx_ring[i]->addr_3 = (u8)((pDB->dma_addr>>24) & 0xff);
-		aup->rx_db_inuse[i] = pDB;
+	return ret;
+}
+
+static void update_rx_stats(struct net_device *dev, u32 status, u32 count)
+{
+	struct net_device_stats *ps = &dev->stats;
+
+	ps->rx_packets++;
+
+	if (status & IR_RX_ERROR) {
+		ps->rx_errors++;
+		if (status & (IR_PHY_ERROR | IR_FIFO_OVER))
+			ps->rx_missed_errors++;
+		if (status & IR_MAX_LEN)
+			ps->rx_length_errors++;
+		if (status & IR_CRC_ERROR)
+			ps->rx_crc_errors++;
+	} else
+		ps->rx_bytes += count;
+}
+
+static void update_tx_stats(struct net_device *dev, u32 status, u32 pkt_len)
+{
+	struct net_device_stats *ps = &dev->stats;
+
+	ps->tx_packets++;
+	ps->tx_bytes += pkt_len;
+
+	if (status & IR_TX_ERROR) {
+		ps->tx_errors++;
+		ps->tx_aborted_errors++;
 	}
-	for (i=0; i<NUM_IR_DESC; i++) {
-		pDB = GetFreeDB(aup);
-		if (!pDB) goto out;
-		aup->tx_ring[i]->addr_0 = (u8)(pDB->dma_addr & 0xff);
-		aup->tx_ring[i]->addr_1 = (u8)((pDB->dma_addr>>8) & 0xff);
-		aup->tx_ring[i]->addr_2 = (u8)((pDB->dma_addr>>16) & 0xff);
-		aup->tx_ring[i]->addr_3 = (u8)((pDB->dma_addr>>24) & 0xff);
-		aup->tx_ring[i]->count_0 = 0;
-		aup->tx_ring[i]->count_1 = 0;
-		aup->tx_ring[i]->flags = 0;
-		aup->tx_db_inuse[i] = pDB;
+}
+
+static void au1k_tx_ack(struct net_device *dev)
+{
+	struct au1k_private *aup = netdev_priv(dev);
+	volatile struct ring_dest *ptxd;
+
+	ptxd = aup->tx_ring[aup->tx_tail];
+	while (!(ptxd->flags & AU_OWN) && (aup->tx_tail != aup->tx_head)) {
+		update_tx_stats(dev, ptxd->flags,
+				(ptxd->count_1 << 8) | ptxd->count_0);
+		ptxd->count_0 = 0;
+		ptxd->count_1 = 0;
+		wmb();
+		aup->tx_tail = (aup->tx_tail + 1) & (NUM_IR_DESC - 1);
+		ptxd = aup->tx_ring[aup->tx_tail];
+
+		if (aup->tx_full) {
+			aup->tx_full = 0;
+			netif_wake_queue(dev);
+		}
 	}
 
-#if defined(CONFIG_MIPS_DB1000) || defined(CONFIG_MIPS_DB1100)
-	/* power on */
-	bcsr_mod(BCSR_RESETS, BCSR_RESETS_IRDA_MODE_MASK,
-			      BCSR_RESETS_IRDA_MODE_FULL);
-#endif
+	if (aup->tx_tail == aup->tx_head) {
+		if (aup->newspeed) {
+			au1k_irda_set_speed(dev, aup->newspeed);
+			aup->newspeed = 0;
+		} else {
+			irda_write(aup, IR_CONFIG_1,
+			    irda_read(aup, IR_CONFIG_1) & ~IR_TX_ENABLE);
+			irda_write(aup, IR_CONFIG_1,
+			    irda_read(aup, IR_CONFIG_1) | IR_RX_ENABLE);
+			irda_write(aup, IR_RING_PROMPT, 0);
+		}
+	}
+}
 
-	return 0;
+static int au1k_irda_rx(struct net_device *dev)
+{
+	struct au1k_private *aup = netdev_priv(dev);
+	volatile struct ring_dest *prxd;
+	struct sk_buff *skb;
+	struct db_dest *pDB;
+	u32 flags, count;
 
-out3:
-	dma_free((void *)aup->rx_ring[0],
-		2 * MAX_NUM_IR_DESC*(sizeof(ring_dest_t)));
-out2:
-	kfree(aup->rx_buff.head);
-out1:
-	printk(KERN_ERR "au1k_init_module failed.  Returns %d\n", retval);
-	return retval;
+	prxd = aup->rx_ring[aup->rx_head];
+	flags = prxd->flags;
+
+	while (!(flags & AU_OWN))  {
+		pDB = aup->rx_db_inuse[aup->rx_head];
+		count = (prxd->count_1 << 8) | prxd->count_0;
+		if (!(flags & IR_RX_ERROR)) {
+			/* good frame */
+			update_rx_stats(dev, flags, count);
+			skb = alloc_skb(count + 1, GFP_ATOMIC);
+			if (skb == NULL) {
+				dev->stats.rx_dropped++;
+				continue;
+			}
+			skb_reserve(skb, 1);
+			if (aup->speed == 4000000)
+				skb_put(skb, count);
+			else
+				skb_put(skb, count - 2);
+			skb_copy_to_linear_data(skb, (void *)pDB->vaddr,
+						count - 2);
+			skb->dev = dev;
+			skb_reset_mac_header(skb);
+			skb->protocol = htons(ETH_P_IRDA);
+			netif_rx(skb);
+			prxd->count_0 = 0;
+			prxd->count_1 = 0;
+		}
+		prxd->flags |= AU_OWN;
+		aup->rx_head = (aup->rx_head + 1) & (NUM_IR_DESC - 1);
+		irda_write(aup, IR_RING_PROMPT, 0);
+
+		/* next descriptor */
+		prxd = aup->rx_ring[aup->rx_head];
+		flags = prxd->flags;
+
+	}
+	return 0;
 }
 
+static irqreturn_t au1k_irda_interrupt(int dummy, void *dev_id)
+{
+	struct net_device *dev = dev_id;
+	struct au1k_private *aup = netdev_priv(dev);
+
+	irda_write(aup, IR_INT_CLEAR, 0); /* ack irda interrupts */
+
+	au1k_irda_rx(dev);
+	au1k_tx_ack(dev);
+
+	return IRQ_HANDLED;
+}
 
 static int au1k_init(struct net_device *dev)
 {
 	struct au1k_private *aup = netdev_priv(dev);
+	u32 enable, ring_address;
 	int i;
-	u32 control;
-	u32 ring_address;
 
-	/* bring the device out of reset */
-	control = 0xe; /* coherent, clock enable, one half system clock */
-			  
+	enable = IR_HC | IR_CE | IR_C;
 #ifndef CONFIG_CPU_LITTLE_ENDIAN
-	control |= 1;
+	enable |= IR_BE;
 #endif
 	aup->tx_head = 0;
 	aup->tx_tail = 0;
 	aup->rx_head = 0;
 
-	for (i=0; i<NUM_IR_DESC; i++) {
+	for (i = 0; i < NUM_IR_DESC; i++)
 		aup->rx_ring[i]->flags = AU_OWN;
-	}
 
-	writel(control, IR_INTERFACE_CONFIG);
-	au_sync_delay(10);
+	irda_write(aup, IR_ENABLE, enable);
+	msleep(20);
 
-	writel(read_ir_reg(IR_ENABLE) & ~0x8000, IR_ENABLE); /* disable PHY */
-	au_sync_delay(1);
+	/* disable PHY */
+	au1k_irda_plat_set_phy_mode(aup, AU1000_IRDA_PHY_MODE_OFF);
+	irda_write(aup, IR_STATUS, irda_read(aup, IR_STATUS) & ~IR_PHYEN);
+	msleep(20);
 
-	writel(MAX_BUF_SIZE, IR_MAX_PKT_LEN);
+	irda_write(aup, IR_MAX_PKT_LEN, MAX_BUF_SIZE);
 
 	ring_address = (u32)virt_to_phys((void *)aup->rx_ring[0]);
-	writel(ring_address >> 26, IR_RING_BASE_ADDR_H);
-	writel((ring_address >> 10) & 0xffff, IR_RING_BASE_ADDR_L);
+	irda_write(aup, IR_RING_BASE_ADDR_H, ring_address >> 26);
+	irda_write(aup, IR_RING_BASE_ADDR_L, (ring_address >> 10) & 0xffff);
 
-	writel(RING_SIZE_64<<8 | RING_SIZE_64<<12, IR_RING_SIZE);
+	irda_write(aup, IR_RING_SIZE,
+				(RING_SIZE_64 << 8) | (RING_SIZE_64 << 12));
 
-	writel(1<<2 | IR_ONE_PIN, IR_CONFIG_2); /* 48MHz */
-	writel(0, IR_RING_ADDR_CMPR);
+	irda_write(aup, IR_CONFIG_2, IR_PHYCLK_48MHZ | IR_ONE_PIN);
+	irda_write(aup, IR_RING_ADDR_CMPR, 0);
 
 	au1k_irda_set_speed(dev, 9600);
 	return 0;
@@ -340,25 +555,28 @@ static int au1k_init(struct net_device *dev)
 
 static int au1k_irda_start(struct net_device *dev)
 {
-	int retval;
-	char hwname[32];
 	struct au1k_private *aup = netdev_priv(dev);
+	char hwname[32];
+	int retval;
 
-	if ((retval = au1k_init(dev))) {
+	retval = au1k_init(dev);
+	if (retval) {
 		printk(KERN_ERR "%s: error in au1k_init\n", dev->name);
 		return retval;
 	}
 
-	if ((retval = request_irq(AU1000_IRDA_TX_INT, au1k_irda_interrupt, 
-					0, dev->name, dev))) {
-		printk(KERN_ERR "%s: unable to get IRQ %d\n", 
+	retval = request_irq(aup->irq_tx, &au1k_irda_interrupt, 0,
+			     dev->name, dev);
+	if (retval) {
+		printk(KERN_ERR "%s: unable to get IRQ %d\n",
 				dev->name, dev->irq);
 		return retval;
 	}
-	if ((retval = request_irq(AU1000_IRDA_RX_INT, au1k_irda_interrupt, 
-					0, dev->name, dev))) {
-		free_irq(AU1000_IRDA_TX_INT, dev);
-		printk(KERN_ERR "%s: unable to get IRQ %d\n", 
+	retval = request_irq(aup->irq_rx, &au1k_irda_interrupt, 0,
+			     dev->name, dev);
+	if (retval) {
+		free_irq(aup->irq_tx, dev);
+		printk(KERN_ERR "%s: unable to get IRQ %d\n",
 				dev->name, dev->irq);
 		return retval;
 	}
@@ -368,9 +586,13 @@ static int au1k_irda_start(struct net_device *dev)
 	aup->irlap = irlap_open(dev, &aup->qos, hwname);
 	netif_start_queue(dev);
 
-	writel(read_ir_reg(IR_CONFIG_2) | 1<<8, IR_CONFIG_2); /* int enable */
+	/* int enable */
+	irda_write(aup, IR_CONFIG_2, irda_read(aup, IR_CONFIG_2) | IR_IEN);
 
-	aup->timer.expires = RUN_AT((3*HZ)); 
+	/* power up */
+	au1k_irda_plat_set_phy_mode(aup, AU1000_IRDA_PHY_MODE_SIR);
+
+	aup->timer.expires = RUN_AT((3 * HZ));
 	aup->timer.data = (unsigned long)dev;
 	return 0;
 }
@@ -379,11 +601,12 @@ static int au1k_irda_stop(struct net_device *dev)
 {
 	struct au1k_private *aup = netdev_priv(dev);
 
+	au1k_irda_plat_set_phy_mode(aup, AU1000_IRDA_PHY_MODE_OFF);
+
 	/* disable interrupts */
-	writel(read_ir_reg(IR_CONFIG_2) & ~(1<<8), IR_CONFIG_2);
-	writel(0, IR_CONFIG_1); 
-	writel(0, IR_INTERFACE_CONFIG); /* disable clock */
-	au_sync();
+	irda_write(aup, IR_CONFIG_2, irda_read(aup, IR_CONFIG_2) & ~IR_IEN);
+	irda_write(aup, IR_CONFIG_1, 0);
+	irda_write(aup, IR_ENABLE, 0); /* disable clock */
 
 	if (aup->irlap) {
 		irlap_close(aup->irlap);
@@ -394,83 +617,12 @@ static int au1k_irda_stop(struct net_device *dev)
 	del_timer(&aup->timer);
 
 	/* disable the interrupt */
-	free_irq(AU1000_IRDA_TX_INT, dev);
-	free_irq(AU1000_IRDA_RX_INT, dev);
-	return 0;
-}
-
-static void __exit au1k_irda_exit(void)
-{
-	struct net_device *dev = ir_devs[0];
-	struct au1k_private *aup = netdev_priv(dev);
-
-	unregister_netdev(dev);
-
-	dma_free((void *)aup->db[0].vaddr,
-		MAX_BUF_SIZE * 2*NUM_IR_DESC);
-	dma_free((void *)aup->rx_ring[0],
-		2 * MAX_NUM_IR_DESC*(sizeof(ring_dest_t)));
-	kfree(aup->rx_buff.head);
-	free_netdev(dev);
-}
-
-
-static inline void 
-update_tx_stats(struct net_device *dev, u32 status, u32 pkt_len)
-{
-	struct au1k_private *aup = netdev_priv(dev);
-	struct net_device_stats *ps = &aup->stats;
-
-	ps->tx_packets++;
-	ps->tx_bytes += pkt_len;
-
-	if (status & IR_TX_ERROR) {
-		ps->tx_errors++;
-		ps->tx_aborted_errors++;
-	}
-}
-
-
-static void au1k_tx_ack(struct net_device *dev)
-{
-	struct au1k_private *aup = netdev_priv(dev);
-	volatile ring_dest_t *ptxd;
-
-	ptxd = aup->tx_ring[aup->tx_tail];
-	while (!(ptxd->flags & AU_OWN) && (aup->tx_tail != aup->tx_head)) {
-		update_tx_stats(dev, ptxd->flags, 
-				ptxd->count_1<<8 | ptxd->count_0);
-		ptxd->count_0 = 0;
-		ptxd->count_1 = 0;
-		au_sync();
-
-		aup->tx_tail = (aup->tx_tail + 1) & (NUM_IR_DESC - 1);
-		ptxd = aup->tx_ring[aup->tx_tail];
-
-		if (aup->tx_full) {
-			aup->tx_full = 0;
-			netif_wake_queue(dev);
-		}
-	}
+	free_irq(aup->irq_tx, dev);
+	free_irq(aup->irq_rx, dev);
 
-	if (aup->tx_tail == aup->tx_head) {
-		if (aup->newspeed) {
-			au1k_irda_set_speed(dev, aup->newspeed);
-			aup->newspeed = 0;
-		}
-		else {
-			writel(read_ir_reg(IR_CONFIG_1) & ~IR_TX_ENABLE, 
-					IR_CONFIG_1); 
-			au_sync();
-			writel(read_ir_reg(IR_CONFIG_1) | IR_RX_ENABLE, 
-					IR_CONFIG_1); 
-			writel(0, IR_RING_PROMPT);
-			au_sync();
-		}
-	}
+	return 0;
 }
 
-
 /*
  * Au1000 transmit routine.
  */
@@ -478,15 +630,12 @@ static int au1k_irda_hard_xmit(struct sk_buff *skb, struct net_device *dev)
 {
 	struct au1k_private *aup = netdev_priv(dev);
 	int speed = irda_get_next_speed(skb);
-	volatile ring_dest_t *ptxd;
-	u32 len;
-
-	u32 flags;
-	db_dest_t *pDB;
+	volatile struct ring_dest *ptxd;
+	struct db_dest *pDB;
+	u32 len, flags;
 
-	if (speed != aup->speed && speed != -1) {
+	if (speed != aup->speed && speed != -1)
 		aup->newspeed = speed;
-	}
 
 	if ((skb->len == 0) && (aup->newspeed)) {
 		if (aup->tx_tail == aup->tx_head) {
@@ -504,138 +653,47 @@ static int au1k_irda_hard_xmit(struct sk_buff *skb, struct net_device *dev)
 		printk(KERN_DEBUG "%s: tx_full\n", dev->name);
 		netif_stop_queue(dev);
 		aup->tx_full = 1;
-		return NETDEV_TX_BUSY;
-	}
-	else if (((aup->tx_head + 1) & (NUM_IR_DESC - 1)) == aup->tx_tail) {
+		return 1;
+	} else if (((aup->tx_head + 1) & (NUM_IR_DESC - 1)) == aup->tx_tail) {
 		printk(KERN_DEBUG "%s: tx_full\n", dev->name);
 		netif_stop_queue(dev);
 		aup->tx_full = 1;
-		return NETDEV_TX_BUSY;
+		return 1;
 	}
 
 	pDB = aup->tx_db_inuse[aup->tx_head];
 
 #if 0
-	if (read_ir_reg(IR_RX_BYTE_CNT) != 0) {
-		printk("tx warning: rx byte cnt %x\n", 
-				read_ir_reg(IR_RX_BYTE_CNT));
+	if (irda_read(aup, IR_RX_BYTE_CNT) != 0) {
+		printk(KERN_DEBUG "tx warning: rx byte cnt %x\n",
+				irda_read(aup, IR_RX_BYTE_CNT));
 	}
 #endif
-	
+
 	if (aup->speed == 4000000) {
 		/* FIR */
-		skb_copy_from_linear_data(skb, pDB->vaddr, skb->len);
+		skb_copy_from_linear_data(skb, (void *)pDB->vaddr, skb->len);
 		ptxd->count_0 = skb->len & 0xff;
 		ptxd->count_1 = (skb->len >> 8) & 0xff;
-
-	}
-	else {
+	} else {
 		/* SIR */
 		len = async_wrap_skb(skb, (u8 *)pDB->vaddr, MAX_BUF_SIZE);
 		ptxd->count_0 = len & 0xff;
 		ptxd->count_1 = (len >> 8) & 0xff;
 		ptxd->flags |= IR_DIS_CRC;
-		au_writel(au_readl(0xae00000c) & ~(1<<13), 0xae00000c);
 	}
 	ptxd->flags |= AU_OWN;
-	au_sync();
+	wmb();
 
-	writel(read_ir_reg(IR_CONFIG_1) | IR_TX_ENABLE, IR_CONFIG_1); 
-	writel(0, IR_RING_PROMPT);
-	au_sync();
+	irda_write(aup, IR_CONFIG_1,
+		   irda_read(aup, IR_CONFIG_1) | IR_TX_ENABLE);
+	irda_write(aup, IR_RING_PROMPT, 0);
 
 	dev_kfree_skb(skb);
 	aup->tx_head = (aup->tx_head + 1) & (NUM_IR_DESC - 1);
 	return NETDEV_TX_OK;
 }
 
-
-static inline void 
-update_rx_stats(struct net_device *dev, u32 status, u32 count)
-{
-	struct au1k_private *aup = netdev_priv(dev);
-	struct net_device_stats *ps = &aup->stats;
-
-	ps->rx_packets++;
-
-	if (status & IR_RX_ERROR) {
-		ps->rx_errors++;
-		if (status & (IR_PHY_ERROR|IR_FIFO_OVER))
-			ps->rx_missed_errors++;
-		if (status & IR_MAX_LEN)
-			ps->rx_length_errors++;
-		if (status & IR_CRC_ERROR)
-			ps->rx_crc_errors++;
-	}
-	else 
-		ps->rx_bytes += count;
-}
-
-/*
- * Au1000 receive routine.
- */
-static int au1k_irda_rx(struct net_device *dev)
-{
-	struct au1k_private *aup = netdev_priv(dev);
-	struct sk_buff *skb;
-	volatile ring_dest_t *prxd;
-	u32 flags, count;
-	db_dest_t *pDB;
-
-	prxd = aup->rx_ring[aup->rx_head];
-	flags = prxd->flags;
-
-	while (!(flags & AU_OWN))  {
-		pDB = aup->rx_db_inuse[aup->rx_head];
-		count = prxd->count_1<<8 | prxd->count_0;
-		if (!(flags & IR_RX_ERROR))  {
-			/* good frame */
-			update_rx_stats(dev, flags, count);
-			skb=alloc_skb(count+1,GFP_ATOMIC);
-			if (skb == NULL) {
-				aup->netdev->stats.rx_dropped++;
-				continue;
-			}
-			skb_reserve(skb, 1);
-			if (aup->speed == 4000000)
-				skb_put(skb, count);
-			else
-				skb_put(skb, count-2);
-			skb_copy_to_linear_data(skb, pDB->vaddr, count - 2);
-			skb->dev = dev;
-			skb_reset_mac_header(skb);
-			skb->protocol = htons(ETH_P_IRDA);
-			netif_rx(skb);
-			prxd->count_0 = 0;
-			prxd->count_1 = 0;
-		}
-		prxd->flags |= AU_OWN;
-		aup->rx_head = (aup->rx_head + 1) & (NUM_IR_DESC - 1);
-		writel(0, IR_RING_PROMPT);
-		au_sync();
-
-		/* next descriptor */
-		prxd = aup->rx_ring[aup->rx_head];
-		flags = prxd->flags;
-
-	}
-	return 0;
-}
-
-
-static irqreturn_t au1k_irda_interrupt(int dummy, void *dev_id)
-{
-	struct net_device *dev = dev_id;
-
-	writel(0, IR_INT_CLEAR); /* ack irda interrupts */
-
-	au1k_irda_rx(dev);
-	au1k_tx_ack(dev);
-
-	return IRQ_HANDLED;
-}
-
-
 /*
  * The Tx ring has been full longer than the watchdog timeout
  * value. The transmitter must be hung?
@@ -653,142 +711,7 @@ static void au1k_tx_timeout(struct net_device *dev)
 	netif_wake_queue(dev);
 }
 
-
-/*
- * Set the IrDA communications speed.
- */
-static int 
-au1k_irda_set_speed(struct net_device *dev, int speed)
-{
-	unsigned long flags;
-	struct au1k_private *aup = netdev_priv(dev);
-	u32 control;
-	int ret = 0, timeout = 10, i;
-	volatile ring_dest_t *ptxd;
-#if defined(CONFIG_MIPS_DB1000) || defined(CONFIG_MIPS_DB1100)
-	unsigned long irda_resets;
-#endif
-
-	if (speed == aup->speed)
-		return ret;
-
-	spin_lock_irqsave(&ir_lock, flags);
-
-	/* disable PHY first */
-	writel(read_ir_reg(IR_ENABLE) & ~0x8000, IR_ENABLE);
-
-	/* disable RX/TX */
-	writel(read_ir_reg(IR_CONFIG_1) & ~(IR_RX_ENABLE|IR_TX_ENABLE), 
-			IR_CONFIG_1);
-	au_sync_delay(1);
-	while (read_ir_reg(IR_ENABLE) & (IR_RX_STATUS | IR_TX_STATUS)) {
-		mdelay(1);
-		if (!timeout--) {
-			printk(KERN_ERR "%s: rx/tx disable timeout\n",
-					dev->name);
-			break;
-		}
-	}
-
-	/* disable DMA */
-	writel(read_ir_reg(IR_CONFIG_1) & ~IR_DMA_ENABLE, IR_CONFIG_1);
-	au_sync_delay(1);
-
-	/* 
-	 *  After we disable tx/rx. the index pointers
- 	 * go back to zero.
-	 */
-	aup->tx_head = aup->tx_tail = aup->rx_head = 0;
-	for (i=0; i<NUM_IR_DESC; i++) {
-		ptxd = aup->tx_ring[i];
-		ptxd->flags = 0;
-		ptxd->count_0 = 0;
-		ptxd->count_1 = 0;
-	}
-
-	for (i=0; i<NUM_IR_DESC; i++) {
-		ptxd = aup->rx_ring[i];
-		ptxd->count_0 = 0;
-		ptxd->count_1 = 0;
-		ptxd->flags = AU_OWN;
-	}
-
-	if (speed == 4000000) {
-#if defined(CONFIG_MIPS_DB1000) || defined(CONFIG_MIPS_DB1100)
-		bcsr_mod(BCSR_RESETS, 0, BCSR_RESETS_FIR_SEL);
-#else /* Pb1000 and Pb1100 */
-		writel(1<<13, CPLD_AUX1);
-#endif
-	}
-	else {
-#if defined(CONFIG_MIPS_DB1000) || defined(CONFIG_MIPS_DB1100)
-		bcsr_mod(BCSR_RESETS, BCSR_RESETS_FIR_SEL, 0);
-#else /* Pb1000 and Pb1100 */
-		writel(readl(CPLD_AUX1) & ~(1<<13), CPLD_AUX1);
-#endif
-	}
-
-	switch (speed) {
-	case 9600:	
-		writel(11<<10 | 12<<5, IR_WRITE_PHY_CONFIG); 
-		writel(IR_SIR_MODE, IR_CONFIG_1); 
-		break;
-	case 19200:	
-		writel(5<<10 | 12<<5, IR_WRITE_PHY_CONFIG); 
-		writel(IR_SIR_MODE, IR_CONFIG_1); 
-		break;
-	case 38400:
-		writel(2<<10 | 12<<5, IR_WRITE_PHY_CONFIG); 
-		writel(IR_SIR_MODE, IR_CONFIG_1); 
-		break;
-	case 57600:	
-		writel(1<<10 | 12<<5, IR_WRITE_PHY_CONFIG); 
-		writel(IR_SIR_MODE, IR_CONFIG_1); 
-		break;
-	case 115200: 
-		writel(12<<5, IR_WRITE_PHY_CONFIG); 
-		writel(IR_SIR_MODE, IR_CONFIG_1); 
-		break;
-	case 4000000:
-		writel(0xF, IR_WRITE_PHY_CONFIG);
-		writel(IR_FIR|IR_DMA_ENABLE|IR_RX_ENABLE, IR_CONFIG_1); 
-		break;
-	default:
-		printk(KERN_ERR "%s unsupported speed %x\n", dev->name, speed);
-		ret = -EINVAL;
-		break;
-	}
-
-	aup->speed = speed;
-	writel(read_ir_reg(IR_ENABLE) | 0x8000, IR_ENABLE);
-	au_sync();
-
-	control = read_ir_reg(IR_ENABLE);
-	writel(0, IR_RING_PROMPT);
-	au_sync();
-
-	if (control & (1<<14)) {
-		printk(KERN_ERR "%s: configuration error\n", dev->name);
-	}
-	else {
-		if (control & (1<<11))
-			printk(KERN_DEBUG "%s Valid SIR config\n", dev->name);
-		if (control & (1<<12))
-			printk(KERN_DEBUG "%s Valid MIR config\n", dev->name);
-		if (control & (1<<13))
-			printk(KERN_DEBUG "%s Valid FIR config\n", dev->name);
-		if (control & (1<<10))
-			printk(KERN_DEBUG "%s TX enabled\n", dev->name);
-		if (control & (1<<9))
-			printk(KERN_DEBUG "%s RX enabled\n", dev->name);
-	}
-
-	spin_unlock_irqrestore(&ir_lock, flags);
-	return ret;
-}
-
-static int 
-au1k_irda_ioctl(struct net_device *dev, struct ifreq *ifreq, int cmd)
+static int au1k_irda_ioctl(struct net_device *dev, struct ifreq *ifreq, int cmd)
 {
 	struct if_irda_req *rq = (struct if_irda_req *)ifreq;
 	struct au1k_private *aup = netdev_priv(dev);
@@ -829,8 +752,218 @@ au1k_irda_ioctl(struct net_device *dev, struct ifreq *ifreq, int cmd)
 	return ret;
 }
 
+static const struct net_device_ops au1k_irda_netdev_ops = {
+	.ndo_open		= au1k_irda_start,
+	.ndo_stop		= au1k_irda_stop,
+	.ndo_start_xmit		= au1k_irda_hard_xmit,
+	.ndo_tx_timeout		= au1k_tx_timeout,
+	.ndo_do_ioctl		= au1k_irda_ioctl,
+};
+
+static int __devinit au1k_irda_net_init(struct net_device *dev)
+{
+	struct au1k_private *aup = netdev_priv(dev);
+	struct db_dest *pDB, *pDBfree;
+	int i, err, retval = 0;
+	dma_addr_t temp;
+
+	err = au1k_irda_init_iobuf(&aup->rx_buff, 14384);
+	if (err)
+		goto out1;
+
+	dev->netdev_ops = &au1k_irda_netdev_ops;
+
+	irda_init_max_qos_capabilies(&aup->qos);
+
+	/* The only value we must override it the baudrate */
+	aup->qos.baud_rate.bits = IR_9600 | IR_19200 | IR_38400 |
+		IR_57600 | IR_115200 | IR_576000 | (IR_4000000 << 8);
+
+	aup->qos.min_turn_time.bits = qos_mtt_bits;
+	irda_qos_bits_to_value(&aup->qos);
+
+	retval = -ENOMEM;
+
+	/* Tx ring follows rx ring + 512 bytes */
+	/* we need a 1k aligned buffer */
+	aup->rx_ring[0] = (struct ring_dest *)
+		dma_alloc(2 * MAX_NUM_IR_DESC * (sizeof(struct ring_dest)),
+			  &temp);
+	if (!aup->rx_ring[0])
+		goto out2;
+
+	/* allocate the data buffers */
+	aup->db[0].vaddr =
+		(void *)dma_alloc(MAX_BUF_SIZE * 2 * NUM_IR_DESC, &temp);
+	if (!aup->db[0].vaddr)
+		goto out3;
+
+	setup_hw_rings(aup, (u32)aup->rx_ring[0], (u32)aup->rx_ring[0] + 512);
+
+	pDBfree = NULL;
+	pDB = aup->db;
+	for (i = 0; i < (2 * NUM_IR_DESC); i++) {
+		pDB->pnext = pDBfree;
+		pDBfree = pDB;
+		pDB->vaddr =
+		       (u32 *)((unsigned)aup->db[0].vaddr + (MAX_BUF_SIZE * i));
+		pDB->dma_addr = (dma_addr_t)virt_to_bus(pDB->vaddr);
+		pDB++;
+	}
+	aup->pDBfree = pDBfree;
+
+	/* attach a data buffer to each descriptor */
+	for (i = 0; i < NUM_IR_DESC; i++) {
+		pDB = GetFreeDB(aup);
+		if (!pDB)
+			goto out3;
+		aup->rx_ring[i]->addr_0 = (u8)(pDB->dma_addr & 0xff);
+		aup->rx_ring[i]->addr_1 = (u8)((pDB->dma_addr >>  8) & 0xff);
+		aup->rx_ring[i]->addr_2 = (u8)((pDB->dma_addr >> 16) & 0xff);
+		aup->rx_ring[i]->addr_3 = (u8)((pDB->dma_addr >> 24) & 0xff);
+		aup->rx_db_inuse[i] = pDB;
+	}
+	for (i = 0; i < NUM_IR_DESC; i++) {
+		pDB = GetFreeDB(aup);
+		if (!pDB)
+			goto out3;
+		aup->tx_ring[i]->addr_0 = (u8)(pDB->dma_addr & 0xff);
+		aup->tx_ring[i]->addr_1 = (u8)((pDB->dma_addr >>  8) & 0xff);
+		aup->tx_ring[i]->addr_2 = (u8)((pDB->dma_addr >> 16) & 0xff);
+		aup->tx_ring[i]->addr_3 = (u8)((pDB->dma_addr >> 24) & 0xff);
+		aup->tx_ring[i]->count_0 = 0;
+		aup->tx_ring[i]->count_1 = 0;
+		aup->tx_ring[i]->flags = 0;
+		aup->tx_db_inuse[i] = pDB;
+	}
+
+	return 0;
+
+out3:
+	dma_free((void *)aup->rx_ring[0],
+		2 * MAX_NUM_IR_DESC * (sizeof(struct ring_dest)));
+out2:
+	kfree(aup->rx_buff.head);
+out1:
+	printk(KERN_ERR "au1k_irda_net_init() failed.  Returns %d\n", retval);
+	return retval;
+}
+
+static int __devinit au1k_irda_probe(struct platform_device *pdev)
+{
+	struct au1k_private *aup;
+	struct net_device *dev;
+	struct resource *r;
+	int err;
+
+	dev = alloc_irdadev(sizeof(struct au1k_private));
+	if (!dev)
+		return -ENOMEM;
+
+	aup = netdev_priv(dev);
+
+	aup->platdata = pdev->dev.platform_data;
+
+	err = -EINVAL;
+	r = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
+	if (!r)
+		goto out;
+
+	aup->irq_tx = r->start;
+
+	r = platform_get_resource(pdev, IORESOURCE_IRQ, 1);
+	if (!r)
+		goto out;
+
+	aup->irq_rx = r->start;
+
+	r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (!r)
+		goto out;
+
+	err = -EBUSY;
+	aup->ioarea = request_mem_region(r->start, r->end - r->start + 1,
+					 pdev->name);
+	if (!aup->ioarea)
+		goto out;
+
+	aup->iobase = ioremap_nocache(r->start, r->end - r->start + 1);
+	if (!aup->iobase)
+		goto out2;
+
+	dev->irq = aup->irq_rx;
+
+	err = au1k_irda_net_init(dev);
+	if (err)
+		goto out3;
+	err = register_netdev(dev);
+	if (err)
+		goto out4;
+
+	platform_set_drvdata(pdev, dev);
+
+	printk(KERN_INFO "IrDA: Registered device %s\n", dev->name);
+	return 0;
+
+out4:
+	dma_free((void *)aup->db[0].vaddr,
+		MAX_BUF_SIZE * 2 * NUM_IR_DESC);
+	dma_free((void *)aup->rx_ring[0],
+		2 * MAX_NUM_IR_DESC * (sizeof(struct ring_dest)));
+	kfree(aup->rx_buff.head);
+out3:
+	iounmap(aup->iobase);
+out2:
+	release_resource(aup->ioarea);
+	kfree(aup->ioarea);
+out:
+	free_netdev(dev);
+	return err;
+}
+
+static int __devexit au1k_irda_remove(struct platform_device *pdev)
+{
+	struct net_device *dev = platform_get_drvdata(pdev);
+	struct au1k_private *aup = netdev_priv(dev);
+
+	unregister_netdev(dev);
+
+	dma_free((void *)aup->db[0].vaddr,
+		MAX_BUF_SIZE * 2 * NUM_IR_DESC);
+	dma_free((void *)aup->rx_ring[0],
+		2 * MAX_NUM_IR_DESC * (sizeof(struct ring_dest)));
+	kfree(aup->rx_buff.head);
+
+	iounmap(aup->iobase);
+	release_resource(aup->ioarea);
+	kfree(aup->ioarea);
+
+	free_netdev(dev);
+
+	return 0;
+}
+
+static struct platform_driver au1k_irda_driver = {
+	.driver	= {
+		.name	= "au1000-irda",
+		.owner	= THIS_MODULE,
+	},
+	.probe		= au1k_irda_probe,
+	.remove		= __devexit_p(au1k_irda_remove),
+};
+
+static int __init au1k_irda_load(void)
+{
+	return platform_driver_register(&au1k_irda_driver);
+}
+
+static void __exit au1k_irda_unload(void)
+{
+	return platform_driver_unregister(&au1k_irda_driver);
+}
+
 MODULE_AUTHOR("Pete Popov <ppopov@mvista.com>");
 MODULE_DESCRIPTION("Au1000 IrDA Device Driver");
 
-module_init(au1k_irda_init);
-module_exit(au1k_irda_exit);
+module_init(au1k_irda_load);
+module_exit(au1k_irda_unload);

drivers/pcmcia/Kconfig

@@ -155,18 +155,14 @@ config PCMCIA_M8XX
 
 	  This driver is also available as a module called m8xx_pcmcia.
 
-config PCMCIA_AU1X00
-	tristate "Au1x00 pcmcia support"
-	depends on MIPS_ALCHEMY && PCMCIA
-
 config PCMCIA_ALCHEMY_DEVBOARD
 	tristate "Alchemy Db/Pb1xxx PCMCIA socket services"
 	depends on MIPS_ALCHEMY && PCMCIA
 	select 64BIT_PHYS_ADDR
 	help
 	  Enable this driver of you want PCMCIA support on your Alchemy
-	  Db1000, Db/Pb1100, Db/Pb1500, Db/Pb1550, Db/Pb1200 board.
-	  NOT suitable for the PB1000!
+	  Db1000, Db/Pb1100, Db/Pb1500, Db/Pb1550, Db/Pb1200, DB1300
+	  board.  NOT suitable for the PB1000!
 
 	  This driver is also available as a module called db1xxx_ss.ko
 

drivers/pcmcia/Makefile

@@ -29,7 +29,6 @@ obj-$(CONFIG_PCMCIA_SA1100)			+= sa11xx_base.o sa1100_cs.o
 obj-$(CONFIG_PCMCIA_SA1111)			+= sa11xx_base.o sa1111_cs.o
 obj-$(CONFIG_M32R_PCC)				+= m32r_pcc.o
 obj-$(CONFIG_M32R_CFC)				+= m32r_cfc.o
-obj-$(CONFIG_PCMCIA_AU1X00)			+= au1x00_ss.o
 obj-$(CONFIG_PCMCIA_BCM63XX)			+= bcm63xx_pcmcia.o
 obj-$(CONFIG_PCMCIA_VRC4171)			+= vrc4171_card.o
 obj-$(CONFIG_PCMCIA_VRC4173)			+= vrc4173_cardu.o
@@ -39,9 +38,6 @@ obj-$(CONFIG_AT91_CF)				+= at91_cf.o
 obj-$(CONFIG_ELECTRA_CF)			+= electra_cf.o
 obj-$(CONFIG_PCMCIA_ALCHEMY_DEVBOARD)		+= db1xxx_ss.o
 
-au1x00_ss-y					+= au1000_generic.o
-au1x00_ss-$(CONFIG_MIPS_PB1000)			+= au1000_pb1x00.o
-
 sa1111_cs-y					+= sa1111_generic.o
 sa1111_cs-$(CONFIG_ASSABET_NEPONSET)		+= sa1100_neponset.o
 sa1111_cs-$(CONFIG_SA1100_BADGE4)		+= sa1100_badge4.o

drivers/pcmcia/au1000_generic.c

@@ -1,545 +0,0 @@
-/*
- *
- * Alchemy Semi Au1000 pcmcia driver
- *
- * Copyright 2001-2003 MontaVista Software Inc.
- * Author: MontaVista Software, Inc.
- *         	ppopov@embeddedalley.com or source@mvista.com
- *
- * Copyright 2004 Pete Popov, Embedded Alley Solutions, Inc.
- * Updated the driver to 2.6. Followed the sa11xx API and largely
- * copied many of the hardware independent functions.
- *
- * ########################################################################
- *
- *  This program is free software; you can distribute it and/or modify it
- *  under the terms of the GNU General Public License (Version 2) as
- *  published by the Free Software Foundation.
- *
- *  This program is distributed in the hope it will be useful, but WITHOUT
- *  ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- *  FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
- *  for more details.
- *
- *  You should have received a copy of the GNU General Public License along
- *  with this program; if not, write to the Free Software Foundation, Inc.,
- *  59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
- *
- * ########################################################################
- *
- * 
- */
-
-#include <linux/module.h>
-#include <linux/moduleparam.h>
-#include <linux/init.h>
-#include <linux/cpufreq.h>
-#include <linux/ioport.h>
-#include <linux/kernel.h>
-#include <linux/timer.h>
-#include <linux/mm.h>
-#include <linux/notifier.h>
-#include <linux/interrupt.h>
-#include <linux/spinlock.h>
-#include <linux/mutex.h>
-#include <linux/platform_device.h>
-#include <linux/slab.h>
-
-#include <asm/io.h>
-#include <asm/irq.h>
-#include <asm/system.h>
-
-#include <asm/mach-au1x00/au1000.h>
-#include "au1000_generic.h"
-
-MODULE_LICENSE("GPL");
-MODULE_AUTHOR("Pete Popov <ppopov@embeddedalley.com>");
-MODULE_DESCRIPTION("Linux PCMCIA Card Services: Au1x00 Socket Controller");
-
-#if 0
-#define debug(x,args...) printk(KERN_DEBUG "%s: " x, __func__ , ##args)
-#else
-#define debug(x,args...)
-#endif
-
-#define MAP_SIZE 0x100000
-extern struct au1000_pcmcia_socket au1000_pcmcia_socket[];
-#define PCMCIA_SOCKET(x)	(au1000_pcmcia_socket + (x))
-#define to_au1000_socket(x)	container_of(x, struct au1000_pcmcia_socket, socket)
-
-/* Some boards like to support CF cards as IDE root devices, so they
- * grab pcmcia sockets directly.
- */
-u32 *pcmcia_base_vaddrs[2];
-extern const unsigned long mips_io_port_base;
-
-static DEFINE_MUTEX(pcmcia_sockets_lock);
-
-static int (*au1x00_pcmcia_hw_init[])(struct device *dev) = {
-	au1x_board_init,
-};
-
-static int
-au1x00_pcmcia_skt_state(struct au1000_pcmcia_socket *skt)
-{
-	struct pcmcia_state state;
-	unsigned int stat;
-
-	memset(&state, 0, sizeof(struct pcmcia_state));
-
-	skt->ops->socket_state(skt, &state);
-
-	stat = state.detect  ? SS_DETECT : 0;
-	stat |= state.ready  ? SS_READY  : 0;
-	stat |= state.wrprot ? SS_WRPROT : 0;
-	stat |= state.vs_3v  ? SS_3VCARD : 0;
-	stat |= state.vs_Xv  ? SS_XVCARD : 0;
-	stat |= skt->cs_state.Vcc ? SS_POWERON : 0;
-
-	if (skt->cs_state.flags & SS_IOCARD)
-		stat |= state.bvd1 ? SS_STSCHG : 0;
-	else {
-		if (state.bvd1 == 0)
-			stat |= SS_BATDEAD;
-		else if (state.bvd2 == 0)
-			stat |= SS_BATWARN;
-	}
-	return stat;
-}
-
-/*
- * au100_pcmcia_config_skt
- *
- * Convert PCMCIA socket state to our socket configure structure.
- */
-static int
-au1x00_pcmcia_config_skt(struct au1000_pcmcia_socket *skt, socket_state_t *state)
-{
-	int ret;
-
-	ret = skt->ops->configure_socket(skt, state);
-	if (ret == 0) {
-		skt->cs_state = *state;
-	}
-
-	if (ret < 0)
-		debug("unable to configure socket %d\n", skt->nr);
-
-	return ret;
-}
-
-/* au1x00_pcmcia_sock_init()
- *
- * (Re-)Initialise the socket, turning on status interrupts
- * and PCMCIA bus.  This must wait for power to stabilise
- * so that the card status signals report correctly.
- *
- * Returns: 0
- */
-static int au1x00_pcmcia_sock_init(struct pcmcia_socket *sock)
-{
-	struct au1000_pcmcia_socket *skt = to_au1000_socket(sock);
-
-	debug("initializing socket %u\n", skt->nr);
-
-	skt->ops->socket_init(skt);
-	return 0;
-}
-
-/*
- * au1x00_pcmcia_suspend()
- *
- * Remove power on the socket, disable IRQs from the card.
- * Turn off status interrupts, and disable the PCMCIA bus.
- *
- * Returns: 0
- */
-static int au1x00_pcmcia_suspend(struct pcmcia_socket *sock)
-{
-	struct au1000_pcmcia_socket *skt = to_au1000_socket(sock);
-
-	debug("suspending socket %u\n", skt->nr);
-
-	skt->ops->socket_suspend(skt);
-
-	return 0;
-}
-
-static DEFINE_SPINLOCK(status_lock);
-
-/*
- * au1x00_check_status()
- */
-static void au1x00_check_status(struct au1000_pcmcia_socket *skt)
-{
-	unsigned int events;
-
-	debug("entering PCMCIA monitoring thread\n");
-
-	do {
-		unsigned int status;
-		unsigned long flags;
-
-		status = au1x00_pcmcia_skt_state(skt);
-
-		spin_lock_irqsave(&status_lock, flags);
-		events = (status ^ skt->status) & skt->cs_state.csc_mask;
-		skt->status = status;
-		spin_unlock_irqrestore(&status_lock, flags);
-
-		debug("events: %s%s%s%s%s%s\n",
-			events == 0         ? "<NONE>"   : "",
-			events & SS_DETECT  ? "DETECT "  : "",
-			events & SS_READY   ? "READY "   : "",
-			events & SS_BATDEAD ? "BATDEAD " : "",
-			events & SS_BATWARN ? "BATWARN " : "",
-			events & SS_STSCHG  ? "STSCHG "  : "");
-
-		if (events)
-			pcmcia_parse_events(&skt->socket, events);
-	} while (events);
-}
-
-/* 
- * au1x00_pcmcia_poll_event()
- * Let's poll for events in addition to IRQs since IRQ only is unreliable...
- */
-static void au1x00_pcmcia_poll_event(unsigned long dummy)
-{
-	struct au1000_pcmcia_socket *skt = (struct au1000_pcmcia_socket *)dummy;
-	debug("polling for events\n");
-
-	mod_timer(&skt->poll_timer, jiffies + AU1000_PCMCIA_POLL_PERIOD);
-
-	au1x00_check_status(skt);
-}
-
-/* au1x00_pcmcia_get_status()
- *
- * From the sa11xx_core.c:
- * Implements the get_status() operation for the in-kernel PCMCIA
- * service (formerly SS_GetStatus in Card Services). Essentially just
- * fills in bits in `status' according to internal driver state or
- * the value of the voltage detect chipselect register.
- *
- * As a debugging note, during card startup, the PCMCIA core issues
- * three set_socket() commands in a row the first with RESET deasserted,
- * the second with RESET asserted, and the last with RESET deasserted
- * again. Following the third set_socket(), a get_status() command will
- * be issued. The kernel is looking for the SS_READY flag (see
- * setup_socket(), reset_socket(), and unreset_socket() in cs.c).
- *
- * Returns: 0
- */
-static int
-au1x00_pcmcia_get_status(struct pcmcia_socket *sock, unsigned int *status)
-{
-	struct au1000_pcmcia_socket *skt = to_au1000_socket(sock);
-
-	skt->status = au1x00_pcmcia_skt_state(skt);
-	*status = skt->status;
-
-	return 0;
-}
-
-/* au1x00_pcmcia_set_socket()
- * Implements the set_socket() operation for the in-kernel PCMCIA
- * service (formerly SS_SetSocket in Card Services). We more or
- * less punt all of this work and let the kernel handle the details
- * of power configuration, reset, &c. We also record the value of
- * `state' in order to regurgitate it to the PCMCIA core later.
- *
- * Returns: 0
- */
-static int
-au1x00_pcmcia_set_socket(struct pcmcia_socket *sock, socket_state_t *state)
-{
-  struct au1000_pcmcia_socket *skt = to_au1000_socket(sock);
-
-  debug("for sock %u\n", skt->nr);
-
-  debug("\tmask:  %s%s%s%s%s%s\n\tflags: %s%s%s%s%s%s\n",
-	(state->csc_mask==0)?"<NONE>":"",
-	(state->csc_mask&SS_DETECT)?"DETECT ":"",
-	(state->csc_mask&SS_READY)?"READY ":"",
-	(state->csc_mask&SS_BATDEAD)?"BATDEAD ":"",
-	(state->csc_mask&SS_BATWARN)?"BATWARN ":"",
-	(state->csc_mask&SS_STSCHG)?"STSCHG ":"",
-	(state->flags==0)?"<NONE>":"",
-	(state->flags&SS_PWR_AUTO)?"PWR_AUTO ":"",
-	(state->flags&SS_IOCARD)?"IOCARD ":"",
-	(state->flags&SS_RESET)?"RESET ":"",
-	(state->flags&SS_SPKR_ENA)?"SPKR_ENA ":"",
-	(state->flags&SS_OUTPUT_ENA)?"OUTPUT_ENA ":"");
-  debug("\tVcc %d  Vpp %d  irq %d\n",
-	state->Vcc, state->Vpp, state->io_irq);
-
-  return au1x00_pcmcia_config_skt(skt, state);
-}
-
-int 
-au1x00_pcmcia_set_io_map(struct pcmcia_socket *sock, struct pccard_io_map *map)
-{
-	struct au1000_pcmcia_socket *skt = to_au1000_socket(sock);
-	unsigned int speed;
-
-	if(map->map>=MAX_IO_WIN){
-		debug("map (%d) out of range\n", map->map);
-		return -1;
-	}
-
-	if(map->flags&MAP_ACTIVE){
-		speed=(map->speed>0)?map->speed:AU1000_PCMCIA_IO_SPEED;
-		skt->spd_io[map->map] = speed;
-	}
-
-	map->start=(unsigned int)(u32)skt->virt_io;
-	map->stop=map->start+MAP_SIZE;
-	return 0;
-
-}  /* au1x00_pcmcia_set_io_map() */
-
-
-static int 
-au1x00_pcmcia_set_mem_map(struct pcmcia_socket *sock, struct pccard_mem_map *map)
-{
-	struct au1000_pcmcia_socket *skt = to_au1000_socket(sock);
-	unsigned short speed = map->speed;
-
-	if(map->map>=MAX_WIN){
-		debug("map (%d) out of range\n", map->map);
-		return -1;
-	}
-
-	if (map->flags & MAP_ATTRIB) {
-		skt->spd_attr[map->map] = speed;
-		skt->spd_mem[map->map] = 0;
-	} else {
-		skt->spd_attr[map->map] = 0;
-		skt->spd_mem[map->map] = speed;
-	}
-
-	if (map->flags & MAP_ATTRIB) {
-		map->static_start = skt->phys_attr + map->card_start;
-	}
-	else {
-		map->static_start = skt->phys_mem + map->card_start;
-	}
-
-	debug("set_mem_map %d start %08lx card_start %08x\n",
-			map->map, map->static_start, map->card_start);
-	return 0;
-
-}  /* au1x00_pcmcia_set_mem_map() */
-
-static struct pccard_operations au1x00_pcmcia_operations = {
-	.init			= au1x00_pcmcia_sock_init,
-	.suspend		= au1x00_pcmcia_suspend,
-	.get_status		= au1x00_pcmcia_get_status,
-	.set_socket		= au1x00_pcmcia_set_socket,
-	.set_io_map		= au1x00_pcmcia_set_io_map,
-	.set_mem_map		= au1x00_pcmcia_set_mem_map,
-};
-
-static const char *skt_names[] = {
-	"PCMCIA socket 0",
-	"PCMCIA socket 1",
-};
-
-struct skt_dev_info {
-	int nskt;
-};
-
-int au1x00_pcmcia_socket_probe(struct device *dev, struct pcmcia_low_level *ops, int first, int nr)
-{
-	struct skt_dev_info *sinfo;
-	struct au1000_pcmcia_socket *skt;
-	int ret, i;
-
-	sinfo = kzalloc(sizeof(struct skt_dev_info), GFP_KERNEL);
-	if (!sinfo) {
-		ret = -ENOMEM;
-		goto out;
-	}
-
-	sinfo->nskt = nr;
-
-	/*
-	 * Initialise the per-socket structure.
-	 */
-	for (i = 0; i < nr; i++) {
-		skt = PCMCIA_SOCKET(i);
-		memset(skt, 0, sizeof(*skt));
-
-		skt->socket.resource_ops = &pccard_static_ops;
-		skt->socket.ops = &au1x00_pcmcia_operations;
-		skt->socket.owner = ops->owner;
-		skt->socket.dev.parent = dev;
-
-		init_timer(&skt->poll_timer);
-		skt->poll_timer.function = au1x00_pcmcia_poll_event;
-		skt->poll_timer.data = (unsigned long)skt;
-		skt->poll_timer.expires = jiffies + AU1000_PCMCIA_POLL_PERIOD;
-
-		skt->nr		= first + i;
-		skt->irq	= 255;
-		skt->dev	= dev;
-		skt->ops	= ops;
-
-		skt->res_skt.name	= skt_names[skt->nr];
-		skt->res_io.name	= "io";
-		skt->res_io.flags	= IORESOURCE_MEM | IORESOURCE_BUSY;
-		skt->res_mem.name	= "memory";
-		skt->res_mem.flags	= IORESOURCE_MEM;
-		skt->res_attr.name	= "attribute";
-		skt->res_attr.flags	= IORESOURCE_MEM;
-
-		/*
-		 * PCMCIA client drivers use the inb/outb macros to access the
-		 * IO registers. Since mips_io_port_base is added to the
-		 * access address of the mips implementation of inb/outb,
-		 * we need to subtract it here because we want to access the
-		 * I/O or MEM address directly, without going through this
-		 * "mips_io_port_base" mechanism.
-		 */
-		if (i == 0) {
-			skt->virt_io = (void *)
-				(ioremap((phys_t)AU1X_SOCK0_IO, 0x1000) -
-				(u32)mips_io_port_base);
-			skt->phys_attr = AU1X_SOCK0_PHYS_ATTR;
-			skt->phys_mem = AU1X_SOCK0_PHYS_MEM;
-		}
-		else  {
-			skt->virt_io = (void *)
-				(ioremap((phys_t)AU1X_SOCK1_IO, 0x1000) -
-				(u32)mips_io_port_base);
-			skt->phys_attr = AU1X_SOCK1_PHYS_ATTR;
-			skt->phys_mem = AU1X_SOCK1_PHYS_MEM;
-		}
-		pcmcia_base_vaddrs[i] = (u32 *)skt->virt_io;
-		ret = ops->hw_init(skt);
-
-		skt->socket.features = SS_CAP_STATIC_MAP|SS_CAP_PCCARD;
-		skt->socket.irq_mask = 0;
-		skt->socket.map_size = MAP_SIZE;
-		skt->socket.pci_irq = skt->irq;
-		skt->socket.io_offset = (unsigned long)skt->virt_io;
-
-		skt->status = au1x00_pcmcia_skt_state(skt);
-
-		ret = pcmcia_register_socket(&skt->socket);
-		if (ret)
-			goto out_err;
-
-		WARN_ON(skt->socket.sock != i);
-
-		add_timer(&skt->poll_timer);
-	}
-
-	dev_set_drvdata(dev, sinfo);
-	return 0;
-
-
-out_err:
-	ops->hw_shutdown(skt);
-	while (i-- > 0) {
-		skt = PCMCIA_SOCKET(i);
-
-		del_timer_sync(&skt->poll_timer);
-		pcmcia_unregister_socket(&skt->socket);
-		if (i == 0) {
-			iounmap(skt->virt_io + (u32)mips_io_port_base);
-			skt->virt_io = NULL;
-		}
-#ifndef CONFIG_MIPS_XXS1500
-		else {
-			iounmap(skt->virt_io + (u32)mips_io_port_base);
-			skt->virt_io = NULL;
-		}
-#endif
-		ops->hw_shutdown(skt);
-
-	}
-	kfree(sinfo);
-out:
-	return ret;
-}
-
-int au1x00_drv_pcmcia_remove(struct platform_device *dev)
-{
-	struct skt_dev_info *sinfo = platform_get_drvdata(dev);
-	int i;
-
-	mutex_lock(&pcmcia_sockets_lock);
-	platform_set_drvdata(dev, NULL);
-
-	for (i = 0; i < sinfo->nskt; i++) {
-		struct au1000_pcmcia_socket *skt = PCMCIA_SOCKET(i);
-
-		del_timer_sync(&skt->poll_timer);
-		pcmcia_unregister_socket(&skt->socket);
-		skt->ops->hw_shutdown(skt);
-		au1x00_pcmcia_config_skt(skt, &dead_socket);
-		iounmap(skt->virt_io + (u32)mips_io_port_base);
-		skt->virt_io = NULL;
-	}
-
-	kfree(sinfo);
-	mutex_unlock(&pcmcia_sockets_lock);
-	return 0;
-}
-
-
-/*
- * PCMCIA "Driver" API
- */
-
-static int au1x00_drv_pcmcia_probe(struct platform_device *dev)
-{
-	int i, ret = -ENODEV;
-
-	mutex_lock(&pcmcia_sockets_lock);
-	for (i=0; i < ARRAY_SIZE(au1x00_pcmcia_hw_init); i++) {
-		ret = au1x00_pcmcia_hw_init[i](&dev->dev);
-		if (ret == 0)
-			break;
-	}
-	mutex_unlock(&pcmcia_sockets_lock);
-	return ret;
-}
-
-static struct platform_driver au1x00_pcmcia_driver = {
-	.driver = {
-		.name		= "au1x00-pcmcia",
-		.owner		= THIS_MODULE,
-	},
-	.probe		= au1x00_drv_pcmcia_probe,
-	.remove		= au1x00_drv_pcmcia_remove,
-};
-
-
-/* au1x00_pcmcia_init()
- *
- * This routine performs low-level PCMCIA initialization and then
- * registers this socket driver with Card Services.
- *
- * Returns: 0 on success, -ve error code on failure
- */
-static int __init au1x00_pcmcia_init(void)
-{
-	int error = 0;
-	error = platform_driver_register(&au1x00_pcmcia_driver);
-	return error;
-}
-
-/* au1x00_pcmcia_exit()
- * Invokes the low-level kernel service to free IRQs associated with this
- * socket controller and reset GPIO edge detection.
- */
-static void __exit au1x00_pcmcia_exit(void)
-{
-	platform_driver_unregister(&au1x00_pcmcia_driver);
-}
-
-module_init(au1x00_pcmcia_init);
-module_exit(au1x00_pcmcia_exit);

drivers/pcmcia/au1000_generic.h

@@ -1,135 +0,0 @@
-/*
- * Alchemy Semi Au1000 pcmcia driver include file
- *
- * Copyright 2001 MontaVista Software Inc.
- * Author: MontaVista Software, Inc.
- *         	ppopov@mvista.com or source@mvista.com
- *
- *  This program is free software; you can distribute it and/or modify it
- *  under the terms of the GNU General Public License (Version 2) as
- *  published by the Free Software Foundation.
- *
- *  This program is distributed in the hope it will be useful, but WITHOUT
- *  ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- *  FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
- *  for more details.
- *
- *  You should have received a copy of the GNU General Public License along
- *  with this program; if not, write to the Free Software Foundation, Inc.,
- *  59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
- */
-#ifndef __ASM_AU1000_PCMCIA_H
-#define __ASM_AU1000_PCMCIA_H
-
-/* include the world */
-
-#include <pcmcia/ss.h>
-#include <pcmcia/cistpl.h>
-#include "cs_internal.h"
-
-#define AU1000_PCMCIA_POLL_PERIOD    (2*HZ)
-#define AU1000_PCMCIA_IO_SPEED       (255)
-#define AU1000_PCMCIA_MEM_SPEED      (300)
-
-#define AU1X_SOCK0_IO        0xF00000000ULL
-#define AU1X_SOCK0_PHYS_ATTR 0xF40000000ULL
-#define AU1X_SOCK0_PHYS_MEM  0xF80000000ULL
-
-/* pcmcia socket 1 needs external glue logic so the memory map
- * differs from board to board.
- */
-#if defined(CONFIG_MIPS_PB1000)
-#define AU1X_SOCK1_IO        0xF08000000ULL
-#define AU1X_SOCK1_PHYS_ATTR 0xF48000000ULL
-#define AU1X_SOCK1_PHYS_MEM  0xF88000000ULL
-#endif
-
-struct pcmcia_state {
-  unsigned detect: 1,
-            ready: 1,
-           wrprot: 1,
-	     bvd1: 1,
-	     bvd2: 1,
-            vs_3v: 1,
-            vs_Xv: 1;
-};
-
-struct pcmcia_configure {
-  unsigned sock: 8,
-            vcc: 8,
-            vpp: 8,
-         output: 1,
-        speaker: 1,
-          reset: 1;
-};
-
-struct pcmcia_irqs {
-	int sock;
-	int irq;
-	const char *str;
-};
-
-
-struct au1000_pcmcia_socket {
-	struct pcmcia_socket socket;
-
-	/*
-	 * Info from low level handler
-	 */
-	struct device		*dev;
-	unsigned int		nr;
-	unsigned int		irq;
-
-	/*
-	 * Core PCMCIA state
-	 */
-	struct pcmcia_low_level *ops;
-
-	unsigned int 		status;
-	socket_state_t		cs_state;
-
-	unsigned short		spd_io[MAX_IO_WIN];
-	unsigned short		spd_mem[MAX_WIN];
-	unsigned short		spd_attr[MAX_WIN];
-
-	struct resource		res_skt;
-	struct resource		res_io;
-	struct resource		res_mem;
-	struct resource		res_attr;
-
-	void *                 	virt_io;
-	unsigned int		phys_io;
-	unsigned int           	phys_attr;
-	unsigned int           	phys_mem;
-	unsigned short        	speed_io, speed_attr, speed_mem;
-
-	unsigned int		irq_state;
-
-	struct timer_list	poll_timer;
-};
-
-struct pcmcia_low_level {
-	struct module *owner;
-
-	int (*hw_init)(struct au1000_pcmcia_socket *);
-	void (*hw_shutdown)(struct au1000_pcmcia_socket *);
-
-	void (*socket_state)(struct au1000_pcmcia_socket *, struct pcmcia_state *);
-	int (*configure_socket)(struct au1000_pcmcia_socket *, struct socket_state_t *);
-
-	/*
-	 * Enable card status IRQs on (re-)initialisation.  This can
-	 * be called at initialisation, power management event, or
-	 * pcmcia event.
-	 */
-	void (*socket_init)(struct au1000_pcmcia_socket *);
-
-	/*
-	 * Disable card status IRQs and PCMCIA bus on suspend.
-	 */
-	void (*socket_suspend)(struct au1000_pcmcia_socket *);
-};
-
-extern int au1x_board_init(struct device *dev);
-
-#endif /* __ASM_AU1000_PCMCIA_H */

drivers/pcmcia/au1000_pb1x00.c

@@ -1,294 +0,0 @@
-/*
- *
- * Alchemy Semi Pb1000 boards specific pcmcia routines.
- *
- * Copyright 2002 MontaVista Software Inc.
- * Author: MontaVista Software, Inc.
- *         	ppopov@mvista.com or source@mvista.com
- *
- * ########################################################################
- *
- *  This program is free software; you can distribute it and/or modify it
- *  under the terms of the GNU General Public License (Version 2) as
- *  published by the Free Software Foundation.
- *
- *  This program is distributed in the hope it will be useful, but WITHOUT
- *  ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- *  FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
- *  for more details.
- *
- *  You should have received a copy of the GNU General Public License along
- *  with this program; if not, write to the Free Software Foundation, Inc.,
- *  59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
- */
-#include <linux/module.h>
-#include <linux/init.h>
-#include <linux/delay.h>
-#include <linux/ioport.h>
-#include <linux/kernel.h>
-#include <linux/timer.h>
-#include <linux/mm.h>
-#include <linux/proc_fs.h>
-#include <linux/types.h>
-
-#include <pcmcia/ss.h>
-#include <pcmcia/cistpl.h>
-
-#include <asm/io.h>
-#include <asm/irq.h>
-#include <asm/system.h>
-
-#include <asm/au1000.h>
-#include <asm/au1000_pcmcia.h>
-
-#define debug(fmt, arg...) do { } while (0)
-
-#include <asm/pb1000.h>
-#define PCMCIA_IRQ AU1000_GPIO_15
-
-static int pb1x00_pcmcia_init(struct pcmcia_init *init)
-{
-	u16 pcr;
-	pcr = PCR_SLOT_0_RST | PCR_SLOT_1_RST;
-
-	au_writel(0x8000, PB1000_MDR); /* clear pcmcia interrupt */
-	au_sync_delay(100);
-	au_writel(0x4000, PB1000_MDR); /* enable pcmcia interrupt */
-	au_sync();
-
-	pcr |= SET_VCC_VPP(VCC_HIZ,VPP_HIZ,0);
-	pcr |= SET_VCC_VPP(VCC_HIZ,VPP_HIZ,1);
-	au_writel(pcr, PB1000_PCR);
-	au_sync_delay(20);
-	  
-	return PCMCIA_NUM_SOCKS;
-}
-
-static int pb1x00_pcmcia_shutdown(void)
-{
-	u16 pcr;
-	pcr = PCR_SLOT_0_RST | PCR_SLOT_1_RST;
-	pcr |= SET_VCC_VPP(VCC_HIZ,VPP_HIZ,0);
-	pcr |= SET_VCC_VPP(VCC_HIZ,VPP_HIZ,1);
-	au_writel(pcr, PB1000_PCR);
-	au_sync_delay(20);
-	return 0;
-}
-
-static int 
-pb1x00_pcmcia_socket_state(unsigned sock, struct pcmcia_state *state)
-{
-	u32 inserted0, inserted1;
-	u16 vs0, vs1;
-
-	vs0 = vs1 = (u16)au_readl(PB1000_ACR1);
-	inserted0 = !(vs0 & (ACR1_SLOT_0_CD1 | ACR1_SLOT_0_CD2));
-	inserted1 = !(vs1 & (ACR1_SLOT_1_CD1 | ACR1_SLOT_1_CD2));
-	vs0 = (vs0 >> 4) & 0x3;
-	vs1 = (vs1 >> 12) & 0x3;
-
-	state->ready = 0;
-	state->vs_Xv = 0;
-	state->vs_3v = 0;
-	state->detect = 0;
-
-	if (sock == 0) {
-		if (inserted0) {
-			switch (vs0) {
-				case 0:
-				case 2:
-					state->vs_3v=1;
-					break;
-				case 3: /* 5V */
-					break;
-				default:
-					/* return without setting 'detect' */
-					printk(KERN_ERR "pb1x00 bad VS (%d)\n",
-							vs0);
-					return 0;
-			}
-			state->detect = 1;
-		}
-	}
-	else  {
-		if (inserted1) {
-			switch (vs1) {
-				case 0:
-				case 2:
-					state->vs_3v=1;
-					break;
-				case 3: /* 5V */
-					break;
-				default:
-					/* return without setting 'detect' */
-					printk(KERN_ERR "pb1x00 bad VS (%d)\n",
-							vs1);
-					return 0;
-			}
-			state->detect = 1;
-		}
-	}
-
-	if (state->detect) {
-		state->ready = 1;
-	}
-
-	state->bvd1=1;
-	state->bvd2=1;
-	state->wrprot=0; 
-	return 1;
-}
-
-
-static int pb1x00_pcmcia_get_irq_info(struct pcmcia_irq_info *info)
-{
-
-	if(info->sock > PCMCIA_MAX_SOCK) return -1;
-
-	/*
-	 * Even in the case of the Pb1000, both sockets are connected
-	 * to the same irq line.
-	 */
-	info->irq = PCMCIA_IRQ;
-
-	return 0;
-}
-
-
-static int 
-pb1x00_pcmcia_configure_socket(const struct pcmcia_configure *configure)
-{
-	u16 pcr;
-
-	if(configure->sock > PCMCIA_MAX_SOCK) return -1;
-
-	pcr = au_readl(PB1000_PCR);
-
-	if (configure->sock == 0) {
-		pcr &= ~(PCR_SLOT_0_VCC0 | PCR_SLOT_0_VCC1 | 
-				PCR_SLOT_0_VPP0 | PCR_SLOT_0_VPP1);
-	}
-	else  {
-		pcr &= ~(PCR_SLOT_1_VCC0 | PCR_SLOT_1_VCC1 | 
-				PCR_SLOT_1_VPP0 | PCR_SLOT_1_VPP1);
-	}
-
-	pcr &= ~PCR_SLOT_0_RST;
-	debug("Vcc %dV Vpp %dV, pcr %x\n", 
-			configure->vcc, configure->vpp, pcr);
-	switch(configure->vcc){
-		case 0:  /* Vcc 0 */
-			switch(configure->vpp) {
-				case 0:
-					pcr |= SET_VCC_VPP(VCC_HIZ,VPP_GND,
-							configure->sock);
-					break;
-				case 12:
-					pcr |= SET_VCC_VPP(VCC_HIZ,VPP_12V,
-							configure->sock);
-					break;
-				case 50:
-					pcr |= SET_VCC_VPP(VCC_HIZ,VPP_5V,
-							configure->sock);
-					break;
-				case 33:
-					pcr |= SET_VCC_VPP(VCC_HIZ,VPP_3V,
-							configure->sock);
-					break;
-				default:
-					pcr |= SET_VCC_VPP(VCC_HIZ,VPP_HIZ,
-							configure->sock);
-					printk("%s: bad Vcc/Vpp (%d:%d)\n", 
-							__func__,
-							configure->vcc, 
-							configure->vpp);
-					break;
-			}
-			break;
-		case 50: /* Vcc 5V */
-			switch(configure->vpp) {
-				case 0:
-					pcr |= SET_VCC_VPP(VCC_5V,VPP_GND,
-							configure->sock);
-					break;
-				case 50:
-					pcr |= SET_VCC_VPP(VCC_5V,VPP_5V,
-							configure->sock);
-					break;
-				case 12:
-					pcr |= SET_VCC_VPP(VCC_5V,VPP_12V,
-							configure->sock);
-					break;
-				case 33:
-					pcr |= SET_VCC_VPP(VCC_5V,VPP_3V,
-							configure->sock);
-					break;
-				default:
-					pcr |= SET_VCC_VPP(VCC_HIZ,VPP_HIZ,
-							configure->sock);
-					printk("%s: bad Vcc/Vpp (%d:%d)\n", 
-							__func__,
-							configure->vcc, 
-							configure->vpp);
-					break;
-			}
-			break;
-		case 33: /* Vcc 3.3V */
-			switch(configure->vpp) {
-				case 0:
-					pcr |= SET_VCC_VPP(VCC_3V,VPP_GND,
-							configure->sock);
-					break;
-				case 50:
-					pcr |= SET_VCC_VPP(VCC_3V,VPP_5V,
-							configure->sock);
-					break;
-				case 12:
-					pcr |= SET_VCC_VPP(VCC_3V,VPP_12V,
-							configure->sock);
-					break;
-				case 33:
-					pcr |= SET_VCC_VPP(VCC_3V,VPP_3V,
-							configure->sock);
-					break;
-				default:
-					pcr |= SET_VCC_VPP(VCC_HIZ,VPP_HIZ,
-							configure->sock);
-					printk("%s: bad Vcc/Vpp (%d:%d)\n", 
-							__func__,
-							configure->vcc, 
-							configure->vpp);
-					break;
-			}
-			break;
-		default: /* what's this ? */
-			pcr |= SET_VCC_VPP(VCC_HIZ,VPP_HIZ,configure->sock);
-			printk(KERN_ERR "%s: bad Vcc %d\n", 
-					__func__, configure->vcc);
-			break;
-	}
-
-	if (configure->sock == 0) {
-	pcr &= ~(PCR_SLOT_0_RST);
-		if (configure->reset)
-		pcr |= PCR_SLOT_0_RST;
-	}
-	else {
-		pcr &= ~(PCR_SLOT_1_RST);
-		if (configure->reset)
-			pcr |= PCR_SLOT_1_RST;
-	}
-	au_writel(pcr, PB1000_PCR);
-	au_sync_delay(300);
-
-	return 0;
-}
-
-
-struct pcmcia_low_level pb1x00_pcmcia_ops = { 
-	pb1x00_pcmcia_init,
-	pb1x00_pcmcia_shutdown,
-	pb1x00_pcmcia_socket_state,
-	pb1x00_pcmcia_get_irq_info,
-	pb1x00_pcmcia_configure_socket
-};

drivers/pcmcia/db1xxx_ss.c

@@ -7,7 +7,7 @@
 
 /* This is a fairly generic PCMCIA socket driver suitable for the
  * following Alchemy Development boards:
- *  Db1000, Db/Pb1500, Db/Pb1100, Db/Pb1550, Db/Pb1200.
+ *  Db1000, Db/Pb1500, Db/Pb1100, Db/Pb1550, Db/Pb1200, Db1300
  *
  * The Db1000 is used as a reference:  Per-socket card-, carddetect- and
  *  statuschange IRQs connected to SoC GPIOs, control and status register
@@ -18,6 +18,7 @@
  *	- Pb1100/Pb1500:  single socket only; voltage key bits VS are
  *			  at STATUS[5:4] (instead of STATUS[1:0]).
  *	- Au1200-based:	  additional card-eject irqs, irqs not gpios!
+ *	- Db1300:	  Db1200-like, no pwr ctrl, single socket (#1).
  */
 
 #include <linux/delay.h>
@@ -59,11 +60,17 @@ struct db1x_pcmcia_sock {
 #define BOARD_TYPE_DEFAULT	0	/* most boards */
 #define BOARD_TYPE_DB1200	1	/* IRQs aren't gpios */
 #define BOARD_TYPE_PB1100	2	/* VS bits slightly different */
+#define BOARD_TYPE_DB1300	3	/* no power control */
 	int	board_type;
 };
 
 #define to_db1x_socket(x) container_of(x, struct db1x_pcmcia_sock, socket)
 
+static int db1300_card_inserted(struct db1x_pcmcia_sock *sock)
+{
+	return bcsr_read(BCSR_SIGSTAT) & (1 << 8);
+}
+
 /* DB/PB1200: check CPLD SIGSTATUS register bit 10/12 */
 static int db1200_card_inserted(struct db1x_pcmcia_sock *sock)
 {
@@ -84,6 +91,8 @@ static int db1x_card_inserted(struct db1x_pcmcia_sock *sock)
 	switch (sock->board_type) {
 	case BOARD_TYPE_DB1200:
 		return db1200_card_inserted(sock);
+	case BOARD_TYPE_DB1300:
+		return db1300_card_inserted(sock);
 	default:
 		return db1000_card_inserted(sock);
 	}
@@ -160,7 +169,8 @@ static int db1x_pcmcia_setup_irqs(struct db1x_pcmcia_sock *sock)
 	 * ejection handler have been registered and the currently
 	 * active one disabled.
 	 */
-	if (sock->board_type == BOARD_TYPE_DB1200) {
+	if ((sock->board_type == BOARD_TYPE_DB1200) ||
+	    (sock->board_type == BOARD_TYPE_DB1300)) {
 		ret = request_irq(sock->insert_irq, db1200_pcmcia_cdirq,
 				  IRQF_DISABLED, "pcmcia_insert", sock);
 		if (ret)
@@ -174,7 +184,7 @@ static int db1x_pcmcia_setup_irqs(struct db1x_pcmcia_sock *sock)
 		}
 
 		/* enable the currently silent one */
-		if (db1200_card_inserted(sock))
+		if (db1x_card_inserted(sock))
 			enable_irq(sock->eject_irq);
 		else
 			enable_irq(sock->insert_irq);
@@ -270,7 +280,8 @@ static int db1x_pcmcia_configure(struct pcmcia_socket *skt,
 	}
 
 	/* create new voltage code */
-	cr_set |= ((v << 2) | p) << (sock->nr * 8);
+	if (sock->board_type != BOARD_TYPE_DB1300)
+		cr_set |= ((v << 2) | p) << (sock->nr * 8);
 
 	changed = state->flags ^ sock->old_flags;
 
@@ -343,6 +354,10 @@ static int db1x_pcmcia_get_status(struct pcmcia_socket *skt,
 	/* if Vcc is not zero, we have applied power to a card */
 	status |= GET_VCC(cr, sock->nr) ? SS_POWERON : 0;
 
+	/* DB1300: power always on, but don't tell when no card present */
+	if ((sock->board_type == BOARD_TYPE_DB1300) && (status & SS_DETECT))
+		status = SS_POWERON | SS_3VCARD | SS_DETECT;
+
 	/* reset de-asserted? then we're ready */
 	status |= (GET_RESET(cr, sock->nr)) ? SS_READY : SS_RESET;
 
@@ -419,6 +434,9 @@ static int __devinit db1x_pcmcia_socket_probe(struct platform_device *pdev)
 	case BCSR_WHOAMI_PB1200 ... BCSR_WHOAMI_DB1200:
 		sock->board_type = BOARD_TYPE_DB1200;
 		break;
+	case BCSR_WHOAMI_DB1300:
+		sock->board_type = BOARD_TYPE_DB1300;
+		break;
 	default:
 		printk(KERN_INFO "db1xxx-ss: unknown board %d!\n", bid);
 		ret = -ENODEV;

drivers/spi/Kconfig

@@ -87,12 +87,12 @@ config SPI_BFIN_SPORT
 	  Enable support for a SPI bus via the Blackfin SPORT peripheral.
 
 config SPI_AU1550
-	tristate "Au1550/Au12x0 SPI Controller"
+	tristate "Au1550/Au1200/Au1300 SPI Controller"
 	depends on MIPS_ALCHEMY && EXPERIMENTAL
 	select SPI_BITBANG
 	help
 	  If you say yes to this option, support will be included for the
-	  Au1550 SPI controller (may also work with Au1200,Au1210,Au1250).
+	  PSC SPI controller found on Au1550, Au1200 and Au1300 series.
 
 config SPI_BITBANG
 	tristate "Utilities for Bitbanging SPI masters"

drivers/usb/host/alchemy-common.c

@@ -52,9 +52,263 @@
 				 USBCFG_EBE | USBCFG_EME | USBCFG_OBE |	       \
 				 USBCFG_OME)
 
+/* Au1300 USB config registers */
+#define USB_DWC_CTRL1		0x00
+#define USB_DWC_CTRL2		0x04
+#define USB_VBUS_TIMER		0x10
+#define USB_SBUS_CTRL		0x14
+#define USB_MSR_ERR		0x18
+#define USB_DWC_CTRL3		0x1C
+#define USB_DWC_CTRL4		0x20
+#define USB_OTG_STATUS		0x28
+#define USB_DWC_CTRL5		0x2C
+#define USB_DWC_CTRL6		0x30
+#define USB_DWC_CTRL7		0x34
+#define USB_PHY_STATUS		0xC0
+#define USB_INT_STATUS		0xC4
+#define USB_INT_ENABLE		0xC8
+
+#define USB_DWC_CTRL1_OTGD	0x04 /* set to DISable OTG */
+#define USB_DWC_CTRL1_HSTRS	0x02 /* set to ENable EHCI */
+#define USB_DWC_CTRL1_DCRS	0x01 /* set to ENable UDC */
+
+#define USB_DWC_CTRL2_PHY1RS	0x04 /* set to enable PHY1 */
+#define USB_DWC_CTRL2_PHY0RS	0x02 /* set to enable PHY0 */
+#define USB_DWC_CTRL2_PHYRS	0x01 /* set to enable PHY */
+
+#define USB_DWC_CTRL3_OHCI1_CKEN	(1 << 19)
+#define USB_DWC_CTRL3_OHCI0_CKEN	(1 << 18)
+#define USB_DWC_CTRL3_EHCI0_CKEN	(1 << 17)
+#define USB_DWC_CTRL3_OTG0_CKEN		(1 << 16)
+
+#define USB_SBUS_CTRL_SBCA		0x04 /* coherent access */
+
+#define USB_INTEN_FORCE			0x20
+#define USB_INTEN_PHY			0x10
+#define USB_INTEN_UDC			0x08
+#define USB_INTEN_EHCI			0x04
+#define USB_INTEN_OHCI1			0x02
+#define USB_INTEN_OHCI0			0x01
 
 static DEFINE_SPINLOCK(alchemy_usb_lock);
 
+static inline void __au1300_usb_phyctl(void __iomem *base, int enable)
+{
+	unsigned long r, s;
+
+	r = __raw_readl(base + USB_DWC_CTRL2);
+	s = __raw_readl(base + USB_DWC_CTRL3);
+
+	s &= USB_DWC_CTRL3_OHCI1_CKEN | USB_DWC_CTRL3_OHCI0_CKEN |
+		USB_DWC_CTRL3_EHCI0_CKEN | USB_DWC_CTRL3_OTG0_CKEN;
+
+	if (enable) {
+		/* simply enable all PHYs */
+		r |= USB_DWC_CTRL2_PHY1RS | USB_DWC_CTRL2_PHY0RS |
+		     USB_DWC_CTRL2_PHYRS;
+		__raw_writel(r, base + USB_DWC_CTRL2);
+		wmb();
+	} else if (!s) {
+		/* no USB block active, do disable all PHYs */
+		r &= ~(USB_DWC_CTRL2_PHY1RS | USB_DWC_CTRL2_PHY0RS |
+		       USB_DWC_CTRL2_PHYRS);
+		__raw_writel(r, base + USB_DWC_CTRL2);
+		wmb();
+	}
+}
+
+static inline void __au1300_ohci_control(void __iomem *base, int enable, int id)
+{
+	unsigned long r;
+
+	if (enable) {
+		__raw_writel(1, base + USB_DWC_CTRL7);  /* start OHCI clock */
+		wmb();
+
+		r = __raw_readl(base + USB_DWC_CTRL3);	/* enable OHCI block */
+		r |= (id == 0) ? USB_DWC_CTRL3_OHCI0_CKEN
+			       : USB_DWC_CTRL3_OHCI1_CKEN;
+		__raw_writel(r, base + USB_DWC_CTRL3);
+		wmb();
+
+		__au1300_usb_phyctl(base, enable);	/* power up the PHYs */
+
+		r = __raw_readl(base + USB_INT_ENABLE);
+		r |= (id == 0) ? USB_INTEN_OHCI0 : USB_INTEN_OHCI1;
+		__raw_writel(r, base + USB_INT_ENABLE);
+		wmb();
+
+		/* reset the OHCI start clock bit */
+		__raw_writel(0, base + USB_DWC_CTRL7);
+		wmb();
+	} else {
+		r = __raw_readl(base + USB_INT_ENABLE);
+		r &= ~((id == 0) ? USB_INTEN_OHCI0 : USB_INTEN_OHCI1);
+		__raw_writel(r, base + USB_INT_ENABLE);
+		wmb();
+
+		r = __raw_readl(base + USB_DWC_CTRL3);
+		r &= ~((id == 0) ? USB_DWC_CTRL3_OHCI0_CKEN
+				 : USB_DWC_CTRL3_OHCI1_CKEN);
+		__raw_writel(r, base + USB_DWC_CTRL3);
+		wmb();
+
+		__au1300_usb_phyctl(base, enable);
+	}
+}
+
+static inline void __au1300_ehci_control(void __iomem *base, int enable)
+{
+	unsigned long r;
+
+	if (enable) {
+		r = __raw_readl(base + USB_DWC_CTRL3);
+		r |= USB_DWC_CTRL3_EHCI0_CKEN;
+		__raw_writel(r, base + USB_DWC_CTRL3);
+		wmb();
+
+		r = __raw_readl(base + USB_DWC_CTRL1);
+		r |= USB_DWC_CTRL1_HSTRS;
+		__raw_writel(r, base + USB_DWC_CTRL1);
+		wmb();
+
+		__au1300_usb_phyctl(base, enable);
+
+		r = __raw_readl(base + USB_INT_ENABLE);
+		r |= USB_INTEN_EHCI;
+		__raw_writel(r, base + USB_INT_ENABLE);
+		wmb();
+	} else {
+		r = __raw_readl(base + USB_INT_ENABLE);
+		r &= ~USB_INTEN_EHCI;
+		__raw_writel(r, base + USB_INT_ENABLE);
+		wmb();
+
+		r = __raw_readl(base + USB_DWC_CTRL1);
+		r &= ~USB_DWC_CTRL1_HSTRS;
+		__raw_writel(r, base + USB_DWC_CTRL1);
+		wmb();
+
+		r = __raw_readl(base + USB_DWC_CTRL3);
+		r &= ~USB_DWC_CTRL3_EHCI0_CKEN;
+		__raw_writel(r, base + USB_DWC_CTRL3);
+		wmb();
+
+		__au1300_usb_phyctl(base, enable);
+	}
+}
+
+static inline void __au1300_udc_control(void __iomem *base, int enable)
+{
+	unsigned long r;
+
+	if (enable) {
+		r = __raw_readl(base + USB_DWC_CTRL1);
+		r |= USB_DWC_CTRL1_DCRS;
+		__raw_writel(r, base + USB_DWC_CTRL1);
+		wmb();
+
+		__au1300_usb_phyctl(base, enable);
+
+		r = __raw_readl(base + USB_INT_ENABLE);
+		r |= USB_INTEN_UDC;
+		__raw_writel(r, base + USB_INT_ENABLE);
+		wmb();
+	} else {
+		r = __raw_readl(base + USB_INT_ENABLE);
+		r &= ~USB_INTEN_UDC;
+		__raw_writel(r, base + USB_INT_ENABLE);
+		wmb();
+
+		r = __raw_readl(base + USB_DWC_CTRL1);
+		r &= ~USB_DWC_CTRL1_DCRS;
+		__raw_writel(r, base + USB_DWC_CTRL1);
+		wmb();
+
+		__au1300_usb_phyctl(base, enable);
+	}
+}
+
+static inline void __au1300_otg_control(void __iomem *base, int enable)
+{
+	unsigned long r;
+	if (enable) {
+		r = __raw_readl(base + USB_DWC_CTRL3);
+		r |= USB_DWC_CTRL3_OTG0_CKEN;
+		__raw_writel(r, base + USB_DWC_CTRL3);
+		wmb();
+
+		r = __raw_readl(base + USB_DWC_CTRL1);
+		r &= ~USB_DWC_CTRL1_OTGD;
+		__raw_writel(r, base + USB_DWC_CTRL1);
+		wmb();
+
+		__au1300_usb_phyctl(base, enable);
+	} else {
+		r = __raw_readl(base + USB_DWC_CTRL1);
+		r |= USB_DWC_CTRL1_OTGD;
+		__raw_writel(r, base + USB_DWC_CTRL1);
+		wmb();
+
+		r = __raw_readl(base + USB_DWC_CTRL3);
+		r &= ~USB_DWC_CTRL3_OTG0_CKEN;
+		__raw_writel(r, base + USB_DWC_CTRL3);
+		wmb();
+
+		__au1300_usb_phyctl(base, enable);
+	}
+}
+
+static inline int au1300_usb_control(int block, int enable)
+{
+	void __iomem *base =
+		(void __iomem *)KSEG1ADDR(AU1300_USB_CTL_PHYS_ADDR);
+	int ret = 0;
+
+	switch (block) {
+	case ALCHEMY_USB_OHCI0:
+		__au1300_ohci_control(base, enable, 0);
+		break;
+	case ALCHEMY_USB_OHCI1:
+		__au1300_ohci_control(base, enable, 1);
+		break;
+	case ALCHEMY_USB_EHCI0:
+		__au1300_ehci_control(base, enable);
+		break;
+	case ALCHEMY_USB_UDC0:
+		__au1300_udc_control(base, enable);
+		break;
+	case ALCHEMY_USB_OTG0:
+		__au1300_otg_control(base, enable);
+		break;
+	default:
+		ret = -ENODEV;
+	}
+	return ret;
+}
+
+static inline void au1300_usb_init(void)
+{
+	void __iomem *base =
+		(void __iomem *)KSEG1ADDR(AU1300_USB_CTL_PHYS_ADDR);
+
+	/* set some sane defaults.  Note: we don't fiddle with DWC_CTRL4
+	 * here at all: Port 2 routing (EHCI or UDC) must be set either
+	 * by boot firmware or platform init code; I can't autodetect
+	 * a sane setting.
+	 */
+	__raw_writel(0, base + USB_INT_ENABLE); /* disable all USB irqs */
+	wmb();
+	__raw_writel(0, base + USB_DWC_CTRL3); /* disable all clocks */
+	wmb();
+	__raw_writel(~0, base + USB_MSR_ERR); /* clear all errors */
+	wmb();
+	__raw_writel(~0, base + USB_INT_STATUS); /* clear int status */
+	wmb();
+	/* set coherent access bit */
+	__raw_writel(USB_SBUS_CTRL_SBCA, base + USB_SBUS_CTRL);
+	wmb();
+}
 
 static inline void __au1200_ohci_control(void __iomem *base, int enable)
 {
@@ -233,6 +487,9 @@ int alchemy_usb_control(int block, int enable)
 	case ALCHEMY_CPU_AU1200:
 		ret = au1200_usb_control(block, enable);
 		break;
+	case ALCHEMY_CPU_AU1300:
+		ret = au1300_usb_control(block, enable);
+		break;
 	default:
 		ret = -ENODEV;
 	}
@@ -281,6 +538,20 @@ static void au1200_usb_pm(int susp)
 	}
 }
 
+static void au1300_usb_pm(int susp)
+{
+	void __iomem *base =
+			(void __iomem *)KSEG1ADDR(AU1300_USB_CTL_PHYS_ADDR);
+	/* remember Port2 routing */
+	if (susp) {
+		alchemy_usb_pmdata[0] = __raw_readl(base + USB_DWC_CTRL4);
+	} else {
+		au1300_usb_init();
+		__raw_writel(alchemy_usb_pmdata[0], base + USB_DWC_CTRL4);
+		wmb();
+	}
+}
+
 static void alchemy_usb_pm(int susp)
 {
 	switch (alchemy_get_cputype()) {
@@ -295,6 +566,9 @@ static void alchemy_usb_pm(int susp)
 	case ALCHEMY_CPU_AU1200:
 		au1200_usb_pm(susp);
 		break;
+	case ALCHEMY_CPU_AU1300:
+		au1300_usb_pm(susp);
+		break;
 	}
 }
 
@@ -328,6 +602,9 @@ static int __init alchemy_usb_init(void)
 	case ALCHEMY_CPU_AU1200:
 		au1200_usb_init();
 		break;
+	case ALCHEMY_CPU_AU1300:
+		au1300_usb_init();
+		break;
 	}
 
 	register_syscore_ops(&alchemy_usb_pm_ops);

drivers/usb/host/ohci-au1xxx.c

@@ -89,7 +89,7 @@ static const struct hc_driver ohci_au1xxx_hc_driver = {
 
 static int ohci_hcd_au1xxx_drv_probe(struct platform_device *pdev)
 {
-	int ret;
+	int ret, unit;
 	struct usb_hcd *hcd;
 
 	if (usb_disabled())
@@ -120,7 +120,9 @@ static int ohci_hcd_au1xxx_drv_probe(struct platform_device *pdev)
 		goto err2;
 	}
 
-	if (alchemy_usb_control(ALCHEMY_USB_OHCI0, 1)) {
+	unit = (hcd->rsrc_start == AU1300_USB_OHCI1_PHYS_ADDR) ?
+			ALCHEMY_USB_OHCI1 : ALCHEMY_USB_OHCI0;
+	if (alchemy_usb_control(unit, 1)) {
 		printk(KERN_INFO "%s: controller init failed!\n", pdev->name);
 		ret = -ENODEV;
 		goto err3;
@@ -135,7 +137,7 @@ static int ohci_hcd_au1xxx_drv_probe(struct platform_device *pdev)
 		return ret;
 	}
 
-	alchemy_usb_control(ALCHEMY_USB_OHCI0, 0);
+	alchemy_usb_control(unit, 0);
 err3:
 	iounmap(hcd->regs);
 err2:
@@ -148,9 +150,12 @@ err1:
 static int ohci_hcd_au1xxx_drv_remove(struct platform_device *pdev)
 {
 	struct usb_hcd *hcd = platform_get_drvdata(pdev);
+	int unit;
 
+	unit = (hcd->rsrc_start == AU1300_USB_OHCI1_PHYS_ADDR) ?
+			ALCHEMY_USB_OHCI1 : ALCHEMY_USB_OHCI0;
 	usb_remove_hcd(hcd);
-	alchemy_usb_control(ALCHEMY_USB_OHCI0, 0);
+	alchemy_usb_control(unit, 0);
 	iounmap(hcd->regs);
 	release_mem_region(hcd->rsrc_start, hcd->rsrc_len);
 	usb_put_hcd(hcd);

drivers/video/Kconfig

@@ -1763,16 +1763,16 @@ config FB_AU1100
 	  au1100fb:panel=<name>.
 
 config FB_AU1200
-	bool "Au1200 LCD Driver"
+	bool "Au1200/Au1300 LCD Driver"
 	depends on (FB = y) && MIPS_ALCHEMY
 	select FB_SYS_FILLRECT
 	select FB_SYS_COPYAREA
 	select FB_SYS_IMAGEBLIT
 	select FB_SYS_FOPS
 	help
-	  This is the framebuffer driver for the AMD Au1200 SOC.  It can drive
-	  various panels and CRTs by passing in kernel cmd line option
-	  au1200fb:panel=<name>.
+	  This is the framebuffer driver for the Au1200/Au1300 SOCs.
+	  It can drive various panels and CRTs by passing in kernel cmd line
+	  option au1200fb:panel=<name>.
 
 config FB_VT8500
 	bool "VT8500 LCD Driver"

drivers/video/au1100fb.c

@@ -60,18 +60,6 @@
 
 #include "au1100fb.h"
 
-/*
- * Sanity check. If this is a new Au1100 based board, search for
- * the PB1100 ifdefs to make sure you modify the code accordingly.
- */
-#if defined(CONFIG_MIPS_PB1100)
-  #include <asm/mach-pb1x00/pb1100.h>
-#elif defined(CONFIG_MIPS_DB1100)
-  #include <asm/mach-db1x00/db1x00.h>
-#else
-  #error "Unknown Au1100 board, Au1100 FB driver not supported"
-#endif
-
 #define DRIVER_NAME "au1100fb"
 #define DRIVER_DESC "LCD controller driver for AU1100 processors"
 

drivers/video/au1200fb.c

@@ -44,6 +44,7 @@
 #include <linux/slab.h>
 
 #include <asm/mach-au1x00/au1000.h>
+#include <asm/mach-au1x00/au1200fb.h>	/* platform_data */
 #include "au1200fb.h"
 
 #define DRIVER_NAME "au1200fb"
@@ -143,6 +144,7 @@ struct au1200_lcd_iodata_t {
 /* Private, per-framebuffer management information (independent of the panel itself) */
 struct au1200fb_device {
 	struct fb_info *fb_info;		/* FB driver info record */
+	struct au1200fb_platdata *pd;
 
 	int					plane;
 	unsigned char* 		fb_mem;		/* FrameBuffer memory map */
@@ -201,9 +203,6 @@ struct window_settings {
 #define LCD_WINCTRL1_PO_16BPP LCD_WINCTRL1_PO_01
 #endif
 
-extern int board_au1200fb_panel_init (void);
-extern int board_au1200fb_panel_shutdown (void);
-
 /*
  * Default window configurations
  */
@@ -334,8 +333,6 @@ struct panel_settings
 	uint32 mode_toyclksrc;
 	uint32 mode_backlight;
 	uint32 mode_auxpll;
-	int (*device_init)(void);
-	int (*device_shutdown)(void);
 #define Xres min_xres
 #define Yres min_yres
 	u32	min_xres;		/* Minimum horizontal resolution */
@@ -385,8 +382,6 @@ static struct panel_settings known_lcd_panels[] =
 		.mode_toyclksrc	= 0x00000004, /* AUXPLL directly */
 		.mode_backlight	= 0x00000000,
 		.mode_auxpll		= 8, /* 96MHz AUXPLL */
-		.device_init		= NULL,
-		.device_shutdown	= NULL,
 		320, 320,
 		240, 240,
 	},
@@ -415,8 +410,6 @@ static struct panel_settings known_lcd_panels[] =
 		.mode_toyclksrc	= 0x00000004, /* AUXPLL directly */
 		.mode_backlight	= 0x00000000,
 		.mode_auxpll		= 8, /* 96MHz AUXPLL */
-		.device_init		= NULL,
-		.device_shutdown	= NULL,
 		640, 480,
 		640, 480,
 	},
@@ -445,8 +438,6 @@ static struct panel_settings known_lcd_panels[] =
 		.mode_toyclksrc	= 0x00000004, /* AUXPLL directly */
 		.mode_backlight	= 0x00000000,
 		.mode_auxpll		= 8, /* 96MHz AUXPLL */
-		.device_init		= NULL,
-		.device_shutdown	= NULL,
 		800, 800,
 		600, 600,
 	},
@@ -475,8 +466,6 @@ static struct panel_settings known_lcd_panels[] =
 		.mode_toyclksrc	= 0x00000004, /* AUXPLL directly */
 		.mode_backlight	= 0x00000000,
 		.mode_auxpll		= 6, /* 72MHz AUXPLL */
-		.device_init		= NULL,
-		.device_shutdown	= NULL,
 		1024, 1024,
 		768, 768,
 	},
@@ -505,8 +494,6 @@ static struct panel_settings known_lcd_panels[] =
 		.mode_toyclksrc	= 0x00000004, /* AUXPLL directly */
 		.mode_backlight	= 0x00000000,
 		.mode_auxpll		= 10, /* 120MHz AUXPLL */
-		.device_init		= NULL,
-		.device_shutdown	= NULL,
 		1280, 1280,
 		1024, 1024,
 	},
@@ -535,8 +522,6 @@ static struct panel_settings known_lcd_panels[] =
 		.mode_toyclksrc	= 0x00000004, /* AUXPLL directly */
 		.mode_backlight	= 0x00000000,
 		.mode_auxpll		= 8, /* 96MHz AUXPLL */
-		.device_init		= board_au1200fb_panel_init,
-		.device_shutdown	= board_au1200fb_panel_shutdown,
 		1024, 1024,
 		768, 768,
 	},
@@ -568,8 +553,6 @@ static struct panel_settings known_lcd_panels[] =
 		.mode_toyclksrc	= 0x00000004, /* AUXPLL directly */
 		.mode_backlight	= 0x00000000,
 		.mode_auxpll		= 8, /* 96MHz AUXPLL */
-		.device_init		= board_au1200fb_panel_init,
-		.device_shutdown	= board_au1200fb_panel_shutdown,
 		640, 480,
 		640, 480,
 	},
@@ -601,8 +584,6 @@ static struct panel_settings known_lcd_panels[] =
 		.mode_toyclksrc	= 0x00000004, /* AUXPLL directly */
 		.mode_backlight	= 0x00000000,
 		.mode_auxpll		= 8, /* 96MHz AUXPLL */
-		.device_init		= board_au1200fb_panel_init,
-		.device_shutdown	= board_au1200fb_panel_shutdown,
 		320, 320,
 		240, 240,
 	},
@@ -634,11 +615,43 @@ static struct panel_settings known_lcd_panels[] =
 		.mode_toyclksrc	= 0x00000004, /* AUXPLL directly */
 		.mode_backlight	= 0x00000000,
 		.mode_auxpll		= 8, /* 96MHz AUXPLL */
-		.device_init		= board_au1200fb_panel_init,
-		.device_shutdown	= board_au1200fb_panel_shutdown,
 		856, 856,
 		480, 480,
 	},
+	[9] = {
+		.name = "DB1300_800x480",
+		.monspecs = {
+			.modedb = NULL,
+			.modedb_len = 0,
+			.hfmin = 30000,
+			.hfmax = 70000,
+			.vfmin = 60,
+			.vfmax = 60,
+			.dclkmin = 6000000,
+			.dclkmax = 28000000,
+			.input = FB_DISP_RGB,
+		},
+		.mode_screen		= LCD_SCREEN_SX_N(800) |
+					  LCD_SCREEN_SY_N(480),
+		.mode_horztiming	= LCD_HORZTIMING_HPW_N(5) |
+					  LCD_HORZTIMING_HND1_N(16) |
+					  LCD_HORZTIMING_HND2_N(8),
+		.mode_verttiming	= LCD_VERTTIMING_VPW_N(4) |
+					  LCD_VERTTIMING_VND1_N(8) |
+					  LCD_VERTTIMING_VND2_N(5),
+		.mode_clkcontrol	= LCD_CLKCONTROL_PCD_N(1) |
+					  LCD_CLKCONTROL_IV |
+					  LCD_CLKCONTROL_IH,
+		.mode_pwmdiv		= 0x00000000,
+		.mode_pwmhi		= 0x00000000,
+		.mode_outmask		= 0x00FFFFFF,
+		.mode_fifoctrl		= 0x2f2f2f2f,
+		.mode_toyclksrc		= 0x00000004, /* AUXPLL directly */
+		.mode_backlight		= 0x00000000,
+		.mode_auxpll		= (48/12) * 2,
+		800, 800,
+		480, 480,
+	},
 };
 
 #define NUM_PANELS (ARRAY_SIZE(known_lcd_panels))
@@ -764,7 +777,8 @@ static int au1200_setlocation (struct au1200fb_device *fbdev, int plane,
 	return 0;
 }
 
-static void au1200_setpanel (struct panel_settings *newpanel)
+static void au1200_setpanel(struct panel_settings *newpanel,
+			    struct au1200fb_platdata *pd)
 {
 	/*
 	 * Perform global setup/init of LCD controller
@@ -798,8 +812,8 @@ static void au1200_setpanel (struct panel_settings *newpanel)
 		    the controller, the clock cannot be turned off before first
 			shutting down the controller.
 		 */
-		if (panel->device_shutdown != NULL)
-			panel->device_shutdown();
+		if (pd->panel_shutdown)
+			pd->panel_shutdown();
 	}
 
 	/* Newpanel == NULL indicates a shutdown operation only */
@@ -852,7 +866,8 @@ static void au1200_setpanel (struct panel_settings *newpanel)
 	au_sync();
 
 	/* Call init of panel */
-	if (panel->device_init != NULL) panel->device_init();
+	if (pd->panel_init)
+		pd->panel_init();
 
 	/* FIX!!!! not appropriate on panel change!!! Global setup/init */
 	lcd->intenable = 0;
@@ -1185,6 +1200,8 @@ static int au1200fb_fb_setcolreg(unsigned regno, unsigned red, unsigned green,
  */
 static int au1200fb_fb_blank(int blank_mode, struct fb_info *fbi)
 {
+	struct au1200fb_device *fbdev = fbi->par;
+
 	/* Short-circuit screen blanking */
 	if (noblanking)
 		return 0;
@@ -1194,13 +1211,13 @@ static int au1200fb_fb_blank(int blank_mode, struct fb_info *fbi)
 	case FB_BLANK_UNBLANK:
 	case FB_BLANK_NORMAL:
 		/* printk("turn on panel\n"); */
-		au1200_setpanel(panel);
+		au1200_setpanel(panel, fbdev->pd);
 		break;
 	case FB_BLANK_VSYNC_SUSPEND:
 	case FB_BLANK_HSYNC_SUSPEND:
 	case FB_BLANK_POWERDOWN:
 		/* printk("turn off panel\n"); */
-		au1200_setpanel(NULL);
+		au1200_setpanel(NULL, fbdev->pd);
 		break;
 	default:
 		break;
@@ -1428,6 +1445,7 @@ static void get_window(unsigned int plane,
 static int au1200fb_ioctl(struct fb_info *info, unsigned int cmd,
                           unsigned long arg)
 {
+	struct au1200fb_device *fbdev = info->par;
 	int plane;
 	int val;
 
@@ -1472,7 +1490,7 @@ static int au1200fb_ioctl(struct fb_info *info, unsigned int cmd,
 				struct panel_settings *newpanel;
 				panel_index = iodata.global.panel_choice;
 				newpanel = &known_lcd_panels[panel_index];
-				au1200_setpanel(newpanel);
+				au1200_setpanel(newpanel, fbdev->pd);
 			}
 			break;
 
@@ -1588,22 +1606,102 @@ static int au1200fb_init_fbinfo(struct au1200fb_device *fbdev)
 
 /*-------------------------------------------------------------------------*/
 
-/* AU1200 LCD controller device driver */
 
+static int au1200fb_setup(struct au1200fb_platdata *pd)
+{
+	char *options = NULL;
+	char *this_opt, *endptr;
+	int num_panels = ARRAY_SIZE(known_lcd_panels);
+	int panel_idx = -1;
+
+	fb_get_options(DRIVER_NAME, &options);
+
+	if (!options)
+		goto out;
+
+	while ((this_opt = strsep(&options, ",")) != NULL) {
+		/* Panel option - can be panel name,
+		 * "bs" for board-switch, or number/index */
+		if (!strncmp(this_opt, "panel:", 6)) {
+			int i;
+			long int li;
+			char *endptr;
+			this_opt += 6;
+			/* First check for index, which allows
+			 * to short circuit this mess */
+			li = simple_strtol(this_opt, &endptr, 0);
+			if (*endptr == '\0')
+				panel_idx = (int)li;
+			else if (strcmp(this_opt, "bs") == 0)
+				panel_idx = pd->panel_index();
+			else {
+				for (i = 0; i < num_panels; i++) {
+					if (!strcmp(this_opt,
+						    known_lcd_panels[i].name)) {
+						panel_idx = i;
+						break;
+					}
+				}
+			}
+			if ((panel_idx < 0) || (panel_idx >= num_panels))
+				print_warn("Panel %s not supported!", this_opt);
+			else
+				panel_index = panel_idx;
+
+		} else if (strncmp(this_opt, "nohwcursor", 10) == 0)
+			nohwcursor = 1;
+		else if (strncmp(this_opt, "devices:", 8) == 0) {
+			this_opt += 8;
+			device_count = simple_strtol(this_opt, &endptr, 0);
+			if ((device_count < 0) ||
+			    (device_count > MAX_DEVICE_COUNT))
+				device_count = MAX_DEVICE_COUNT;
+		} else if (strncmp(this_opt, "wincfg:", 7) == 0) {
+			this_opt += 7;
+			window_index = simple_strtol(this_opt, &endptr, 0);
+			if ((window_index < 0) ||
+			    (window_index >= ARRAY_SIZE(windows)))
+				window_index = DEFAULT_WINDOW_INDEX;
+		} else if (strncmp(this_opt, "off", 3) == 0)
+			return 1;
+		else
+			print_warn("Unsupported option \"%s\"", this_opt);
+	}
+
+out:
+	return 0;
+}
+
+/* AU1200 LCD controller device driver */
 static int __devinit au1200fb_drv_probe(struct platform_device *dev)
 {
 	struct au1200fb_device *fbdev;
+	struct au1200fb_platdata *pd;
 	struct fb_info *fbi = NULL;
 	unsigned long page;
 	int bpp, plane, ret, irq;
 
+	print_info("" DRIVER_DESC "");
+
+	pd = dev->dev.platform_data;
+	if (!pd)
+		return -ENODEV;
+
+	/* Setup driver with options */
+	if (au1200fb_setup(pd))
+		return -ENODEV;
+
+	/* Point to the panel selected */
+	panel = &known_lcd_panels[panel_index];
+	win = &windows[window_index];
+
+	printk(DRIVER_NAME ": Panel %d %s\n", panel_index, panel->name);
+	printk(DRIVER_NAME ": Win %d %s\n", window_index, win->name);
+
 	/* shut gcc up */
 	ret = 0;
 	fbdev = NULL;
 
-	/* Kickstart the panel */
-	au1200_setpanel(panel);
-
 	for (plane = 0; plane < device_count; ++plane) {
 		bpp = winbpp(win->w[plane].mode_winctrl1);
 		if (win->w[plane].xres == 0)
@@ -1619,6 +1717,7 @@ static int __devinit au1200fb_drv_probe(struct platform_device *dev)
 		_au1200fb_infos[plane] = fbi;
 		fbdev = fbi->par;
 		fbdev->fb_info = fbi;
+		fbdev->pd = pd;
 
 		fbdev->plane = plane;
 
@@ -1680,6 +1779,11 @@ static int __devinit au1200fb_drv_probe(struct platform_device *dev)
 		goto failed;
 	}
 
+	platform_set_drvdata(dev, pd);
+
+	/* Kickstart the panel */
+	au1200_setpanel(panel, pd);
+
 	return 0;
 
 failed:
@@ -1699,12 +1803,13 @@ failed:
 
 static int __devexit au1200fb_drv_remove(struct platform_device *dev)
 {
+	struct au1200fb_platdata *pd = platform_get_drvdata(dev);
 	struct au1200fb_device *fbdev;
 	struct fb_info *fbi;
 	int plane;
 
 	/* Turn off the panel */
-	au1200_setpanel(NULL);
+	au1200_setpanel(NULL, pd);
 
 	for (plane = 0; plane < device_count; ++plane)	{
 		fbi = _au1200fb_infos[plane];
@@ -1732,7 +1837,8 @@ static int __devexit au1200fb_drv_remove(struct platform_device *dev)
 #ifdef CONFIG_PM
 static int au1200fb_drv_suspend(struct device *dev)
 {
-	au1200_setpanel(NULL);
+	struct au1200fb_platdata *pd = dev_get_drvdata(dev);
+	au1200_setpanel(NULL, pd);
 
 	lcd->outmask = 0;
 	au_sync();
@@ -1742,11 +1848,12 @@ static int au1200fb_drv_suspend(struct device *dev)
 
 static int au1200fb_drv_resume(struct device *dev)
 {
+	struct au1200fb_platdata *pd = dev_get_drvdata(dev);
 	struct fb_info *fbi;
 	int i;
 
 	/* Kickstart the panel */
-	au1200_setpanel(panel);
+	au1200_setpanel(panel, pd);
 
 	for (i = 0; i < device_count; i++) {
 		fbi = _au1200fb_infos[i];
@@ -1781,100 +1888,8 @@ static struct platform_driver au1200fb_driver = {
 
 /*-------------------------------------------------------------------------*/
 
-/* Kernel driver */
-
-static int au1200fb_setup(void)
-{
-	char *options = NULL;
-	char *this_opt, *endptr;
-	int num_panels = ARRAY_SIZE(known_lcd_panels);
-	int panel_idx = -1;
-
-	fb_get_options(DRIVER_NAME, &options);
-
-	if (options) {
-		while ((this_opt = strsep(&options,",")) != NULL) {
-			/* Panel option - can be panel name,
-			 * "bs" for board-switch, or number/index */
-			if (!strncmp(this_opt, "panel:", 6)) {
-				int i;
-				long int li;
-				char *endptr;
-				this_opt += 6;
-				/* First check for index, which allows
-				 * to short circuit this mess */
-				li = simple_strtol(this_opt, &endptr, 0);
-				if (*endptr == '\0') {
-					panel_idx = (int)li;
-				}
-				else if (strcmp(this_opt, "bs") == 0) {
-					extern int board_au1200fb_panel(void);
-					panel_idx = board_au1200fb_panel();
-				}
-
-				else
-				for (i = 0; i < num_panels; i++) {
-					if (!strcmp(this_opt, known_lcd_panels[i].name)) {
-						panel_idx = i;
-						break;
-					}
-				}
-
-				if ((panel_idx < 0) || (panel_idx >= num_panels)) {
-						print_warn("Panel %s not supported!", this_opt);
-				}
-				else
-					panel_index = panel_idx;
-			}
-
-			else if (strncmp(this_opt, "nohwcursor", 10) == 0) {
-				nohwcursor = 1;
-			}
-
-			else if (strncmp(this_opt, "devices:", 8) == 0) {
-				this_opt += 8;
-				device_count = simple_strtol(this_opt,
-							     &endptr, 0);
-				if ((device_count < 0) ||
-				    (device_count > MAX_DEVICE_COUNT))
-					device_count = MAX_DEVICE_COUNT;
-			}
-
-			else if (strncmp(this_opt, "wincfg:", 7) == 0) {
-				this_opt += 7;
-				window_index = simple_strtol(this_opt,
-							     &endptr, 0);
-				if ((window_index < 0) ||
-				    (window_index >= ARRAY_SIZE(windows)))
-					window_index = DEFAULT_WINDOW_INDEX;
-			}
-
-			else if (strncmp(this_opt, "off", 3) == 0)
-				return 1;
-			/* Unsupported option */
-			else {
-				print_warn("Unsupported option \"%s\"", this_opt);
-			}
-		}
-	}
-	return 0;
-}
-
 static int __init au1200fb_init(void)
 {
-	print_info("" DRIVER_DESC "");
-
-	/* Setup driver with options */
-	if (au1200fb_setup())
-		return -ENODEV;
-
-	/* Point to the panel selected */
-	panel = &known_lcd_panels[panel_index];
-	win = &windows[window_index];
-
-	printk(DRIVER_NAME ": Panel %d %s\n", panel_index, panel->name);
-	printk(DRIVER_NAME ": Win %d %s\n", window_index, win->name);
-
 	return platform_driver_register(&au1200fb_driver);
 }
 

sound/soc/au1x/Kconfig

@@ -1,13 +1,13 @@
 ##
-## Au1200/Au1550 PSC + DBDMA
+## Au1200/Au1550/Au1300 PSC + DBDMA
 ##
 config SND_SOC_AU1XPSC
-	tristate "SoC Audio for Au1200/Au1250/Au1550"
+	tristate "SoC Audio for Au12xx/Au13xx/Au1550"
 	depends on MIPS_ALCHEMY
 	help
 	  This option enables support for the Programmable Serial
 	  Controllers in AC97 and I2S mode, and the Descriptor-Based DMA
-	  Controller (DBDMA) as found on the Au1200/Au1250/Au1550 SoC.
+	  Controller (DBDMA) as found on the Au12xx/Au13xx/Au1550 SoC.
 
 config SND_SOC_AU1XPSC_I2S
 	tristate
@@ -51,12 +51,14 @@ config SND_SOC_DB1000
 	  of boards (DB1000/DB1500/DB1100).
 
 config SND_SOC_DB1200
-	tristate "DB1200 AC97+I2S audio support"
+	tristate "DB1200/DB1300/DB1550 Audio support"
 	depends on SND_SOC_AU1XPSC
 	select SND_SOC_AU1XPSC_AC97
 	select SND_SOC_AC97_CODEC
+	select SND_SOC_WM9712
 	select SND_SOC_AU1XPSC_I2S
 	select SND_SOC_WM8731
 	help
-	  Select this option to enable audio (AC97 or I2S) on the
-	  Alchemy/AMD/RMI DB1200 demoboard.
+	  Select this option to enable audio (AC97 and I2S) on the
+	  Alchemy/AMD/RMI/NetLogic Db1200, Db1550 and Db1300 evaluation boards.
+	  If you need Db1300 touchscreen support, you definitely want to say Y.

sound/soc/au1x/db1200.c

@@ -1,5 +1,5 @@
 /*
- * DB1200 ASoC audio fabric support code.
+ * DB1200/DB1300/DB1550 ASoC audio fabric support code.
  *
  * (c) 2008-2011 Manuel Lauss <manuel.lauss@googlemail.com>
  *
@@ -28,6 +28,18 @@ static struct platform_device_id db1200_pids[] = {
 	}, {
 		.name		= "db1200-i2s",
 		.driver_data	= 1,
+	}, {
+		.name		= "db1300-ac97",
+		.driver_data	= 2,
+	}, {
+		.name		= "db1300-i2s",
+		.driver_data	= 3,
+	}, {
+		.name		= "db1550-ac97",
+		.driver_data	= 4,
+	}, {
+		.name		= "db1550-i2s",
+		.driver_data	= 5,
 	},
 	{},
 };
@@ -49,6 +61,27 @@ static struct snd_soc_card db1200_ac97_machine = {
 	.num_links	= 1,
 };
 
+static struct snd_soc_dai_link db1300_ac97_dai = {
+	.name		= "AC97",
+	.stream_name	= "AC97 HiFi",
+	.codec_dai_name	= "wm9712-hifi",
+	.cpu_dai_name	= "au1xpsc_ac97.1",
+	.platform_name	= "au1xpsc-pcm.1",
+	.codec_name	= "wm9712-codec.1",
+};
+
+static struct snd_soc_card db1300_ac97_machine = {
+	.name		= "DB1300_AC97",
+	.dai_link	= &db1300_ac97_dai,
+	.num_links	= 1,
+};
+
+static struct snd_soc_card db1550_ac97_machine = {
+	.name		= "DB1550_AC97",
+	.dai_link	= &db1200_ac97_dai,
+	.num_links	= 1,
+};
+
 /*-------------------------  I2S PART  ---------------------------*/
 
 static int db1200_i2s_startup(struct snd_pcm_substream *substream)
@@ -98,11 +131,47 @@ static struct snd_soc_card db1200_i2s_machine = {
 	.num_links	= 1,
 };
 
+static struct snd_soc_dai_link db1300_i2s_dai = {
+	.name		= "WM8731",
+	.stream_name	= "WM8731 PCM",
+	.codec_dai_name	= "wm8731-hifi",
+	.cpu_dai_name	= "au1xpsc_i2s.2",
+	.platform_name	= "au1xpsc-pcm.2",
+	.codec_name	= "wm8731.0-001b",
+	.ops		= &db1200_i2s_wm8731_ops,
+};
+
+static struct snd_soc_card db1300_i2s_machine = {
+	.name		= "DB1300_I2S",
+	.dai_link	= &db1300_i2s_dai,
+	.num_links	= 1,
+};
+
+static struct snd_soc_dai_link db1550_i2s_dai = {
+	.name		= "WM8731",
+	.stream_name	= "WM8731 PCM",
+	.codec_dai_name	= "wm8731-hifi",
+	.cpu_dai_name	= "au1xpsc_i2s.3",
+	.platform_name	= "au1xpsc-pcm.3",
+	.codec_name	= "wm8731.0-001b",
+	.ops		= &db1200_i2s_wm8731_ops,
+};
+
+static struct snd_soc_card db1550_i2s_machine = {
+	.name		= "DB1550_I2S",
+	.dai_link	= &db1550_i2s_dai,
+	.num_links	= 1,
+};
+
 /*-------------------------  COMMON PART  ---------------------------*/
 
 static struct snd_soc_card *db1200_cards[] __devinitdata = {
 	&db1200_ac97_machine,
 	&db1200_i2s_machine,
+	&db1300_ac97_machine,
+	&db1300_i2s_machine,
+	&db1550_ac97_machine,
+	&db1550_i2s_machine,
 };
 
 static int __devinit db1200_audio_probe(struct platform_device *pdev)
@@ -147,5 +216,5 @@ module_init(db1200_audio_load);
 module_exit(db1200_audio_unload);
 
 MODULE_LICENSE("GPL");
-MODULE_DESCRIPTION("DB1200 ASoC audio support");
+MODULE_DESCRIPTION("DB1200/DB1300/DB1550 ASoC audio support");
 MODULE_AUTHOR("Manuel Lauss");