Merge branches 'acpi-pm', 'acpi-processor' and 'acpi-video'

* acpi-pm:
  ACPI / PM: Fix PM initialization for devices that are not present

* acpi-processor:
  ACPI / processor: Rename acpi_(un)map_lsapic() to acpi_(un)map_cpu()
  ACPI / processor: Convert apic_id to phys_id to make it arch agnostic

* acpi-video:
  ACPI / video: Add disable_native_backlight quirk for Dell XPS15 L521X

Documentation/devicetree/bindings/input/gpio-keys.txt

@@ -10,12 +10,13 @@ Optional properties:
 Each button (key) is represented as a sub-node of "gpio-keys":
 Subnode properties:
 
+	- gpios: OF device-tree gpio specification.
+	- interrupts: the interrupt line for that input.
 	- label: Descriptive name of the key.
 	- linux,code: Keycode to emit.
 
-Required mutual exclusive subnode-properties:
-	- gpios: OF device-tree gpio specification.
-	- interrupts: the interrupt line for that input
+Note that either "interrupts" or "gpios" properties can be omitted, but not
+both at the same time. Specifying both properties is allowed.
 
 Optional subnode-properties:
 	- linux,input-type: Specify event type this button/key generates.
@@ -23,6 +24,9 @@ Optional subnode-properties:
 	- debounce-interval: Debouncing interval time in milliseconds.
 	  If not specified defaults to 5.
 	- gpio-key,wakeup: Boolean, button can wake-up the system.
+	- linux,can-disable: Boolean, indicates that button is connected
+	  to dedicated (not shared) interrupt which can be disabled to
+	  suppress events from the button.
 
 Example nodes:
 

Documentation/devicetree/bindings/input/stmpe-keypad.txt

@@ -8,6 +8,8 @@ Optional properties:
  - debounce-interval        : Debouncing interval time in milliseconds
  - st,scan-count            : Scanning cycles elapsed before key data is updated
  - st,no-autorepeat         : If specified device will not autorepeat
+ - keypad,num-rows          : See ./matrix-keymap.txt
+ - keypad,num-columns       : See ./matrix-keymap.txt
 
 Example:
 

Makefile

@@ -1,7 +1,7 @@
 VERSION = 3
 PATCHLEVEL = 19
 SUBLEVEL = 0
-EXTRAVERSION = -rc2
+EXTRAVERSION = -rc3
 NAME = Diseased Newt
 
 # *DOCUMENTATION*

arch/arm/boot/dts/armada-370-db.dts

@@ -203,27 +203,3 @@
 		compatible = "linux,spdif-dir";
 	};
 };
-
-&pinctrl {
-	/*
-	 * These pins might be muxed as I2S by
-	 * the bootloader, but it conflicts
-	 * with the real I2S pins that are
-	 * muxed using i2s_pins. We must mux
-	 * those pins to a function other than
-	 * I2S.
-	 */
-	pinctrl-0 = <&hog_pins1 &hog_pins2>;
-	pinctrl-names = "default";
-
-	hog_pins1: hog-pins1 {
-		marvell,pins = "mpp6",  "mpp8", "mpp10",
-			       "mpp12", "mpp13";
-		marvell,function = "gpio";
-	};
-
-	hog_pins2: hog-pins2 {
-		marvell,pins = "mpp5", "mpp7", "mpp9";
-		marvell,function = "gpo";
-	};
-};

arch/arm/configs/multi_v7_defconfig

@@ -338,6 +338,7 @@ CONFIG_USB=y
 CONFIG_USB_XHCI_HCD=y
 CONFIG_USB_XHCI_MVEBU=y
 CONFIG_USB_EHCI_HCD=y
+CONFIG_USB_EHCI_EXYNOS=y
 CONFIG_USB_EHCI_TEGRA=y
 CONFIG_USB_EHCI_HCD_STI=y
 CONFIG_USB_EHCI_HCD_PLATFORM=y

arch/arm/kernel/setup.c

@@ -1046,6 +1046,15 @@ static int c_show(struct seq_file *m, void *v)
 		seq_printf(m, "model name\t: %s rev %d (%s)\n",
 			   cpu_name, cpuid & 15, elf_platform);
 
+#if defined(CONFIG_SMP)
+		seq_printf(m, "BogoMIPS\t: %lu.%02lu\n",
+			   per_cpu(cpu_data, i).loops_per_jiffy / (500000UL/HZ),
+			   (per_cpu(cpu_data, i).loops_per_jiffy / (5000UL/HZ)) % 100);
+#else
+		seq_printf(m, "BogoMIPS\t: %lu.%02lu\n",
+			   loops_per_jiffy / (500000/HZ),
+			   (loops_per_jiffy / (5000/HZ)) % 100);
+#endif
 		/* dump out the processor features */
 		seq_puts(m, "Features\t: ");
 

arch/arm/kernel/smp.c

@@ -387,6 +387,18 @@ asmlinkage void secondary_start_kernel(void)
 
 void __init smp_cpus_done(unsigned int max_cpus)
 {
+	int cpu;
+	unsigned long bogosum = 0;
+
+	for_each_online_cpu(cpu)
+		bogosum += per_cpu(cpu_data, cpu).loops_per_jiffy;
+
+	printk(KERN_INFO "SMP: Total of %d processors activated "
+	       "(%lu.%02lu BogoMIPS).\n",
+	       num_online_cpus(),
+	       bogosum / (500000/HZ),
+	       (bogosum / (5000/HZ)) % 100);
+
 	hyp_mode_check();
 }
 

arch/ia64/include/asm/unistd.h

@@ -11,7 +11,7 @@
 
 
 
-#define NR_syscalls			318 /* length of syscall table */
+#define NR_syscalls			319 /* length of syscall table */
 
 /*
  * The following defines stop scripts/checksyscalls.sh from complaining about

arch/ia64/include/uapi/asm/unistd.h

@@ -331,5 +331,6 @@
 #define __NR_getrandom			1339
 #define __NR_memfd_create		1340
 #define __NR_bpf			1341
+#define __NR_execveat			1342
 
 #endif /* _UAPI_ASM_IA64_UNISTD_H */

arch/ia64/kernel/acpi.c

@@ -893,13 +893,13 @@ static int _acpi_map_lsapic(acpi_handle handle, int physid, int *pcpu)
 }
 
 /* wrapper to silence section mismatch warning */
-int __ref acpi_map_lsapic(acpi_handle handle, int physid, int *pcpu)
+int __ref acpi_map_cpu(acpi_handle handle, int physid, int *pcpu)
 {
 	return _acpi_map_lsapic(handle, physid, pcpu);
 }
-EXPORT_SYMBOL(acpi_map_lsapic);
+EXPORT_SYMBOL(acpi_map_cpu);
 
-int acpi_unmap_lsapic(int cpu)
+int acpi_unmap_cpu(int cpu)
 {
 	ia64_cpu_to_sapicid[cpu] = -1;
 	set_cpu_present(cpu, false);
@@ -910,8 +910,7 @@ int acpi_unmap_lsapic(int cpu)
 
 	return (0);
 }
-
-EXPORT_SYMBOL(acpi_unmap_lsapic);
+EXPORT_SYMBOL(acpi_unmap_cpu);
 #endif				/* CONFIG_ACPI_HOTPLUG_CPU */
 
 #ifdef CONFIG_ACPI_NUMA

arch/ia64/kernel/entry.S

@@ -1779,6 +1779,7 @@ sys_call_table:
 	data8 sys_getrandom
 	data8 sys_memfd_create			// 1340
 	data8 sys_bpf
+	data8 sys_execveat
 
 	.org sys_call_table + 8*NR_syscalls	// guard against failures to increase NR_syscalls
 #endif /* __IA64_ASM_PARAVIRTUALIZED_NATIVE */

arch/nios2/kernel/cpuinfo.c

@@ -72,6 +72,7 @@ void __init setup_cpuinfo(void)
 	cpuinfo.has_div = fcpu_has(cpu, "altr,has-div");
 	cpuinfo.has_mul = fcpu_has(cpu, "altr,has-mul");
 	cpuinfo.has_mulx = fcpu_has(cpu, "altr,has-mulx");
+	cpuinfo.mmu = fcpu_has(cpu, "altr,has-mmu");
 
 	if (IS_ENABLED(CONFIG_NIOS2_HW_DIV_SUPPORT) && !cpuinfo.has_div)
 		err_cpu("DIV");

arch/nios2/kernel/entry.S

@@ -365,30 +365,14 @@ ENTRY(ret_from_interrupt)
 	GET_THREAD_INFO	r1
 	ldw	r4, TI_PREEMPT_COUNT(r1)
 	bne	r4, r0, restore_all
-
-need_resched:
 	ldw	r4, TI_FLAGS(r1)		/* ? Need resched set */
 	BTBZ	r10, r4, TIF_NEED_RESCHED, restore_all
 	ldw	r4, PT_ESTATUS(sp)	/* ? Interrupts off */
 	andi	r10, r4, ESTATUS_EPIE
 	beq	r10, r0, restore_all
-	movia	r4, PREEMPT_ACTIVE
-	stw	r4, TI_PREEMPT_COUNT(r1)
-	rdctl	r10, status		/* enable intrs again */
-	ori	r10, r10 ,STATUS_PIE
-	wrctl	status, r10
-	PUSH	r1
-	call	schedule
-	POP	r1
-	mov	r4, r0
-	stw	r4, TI_PREEMPT_COUNT(r1)
-	rdctl	r10, status		/* disable intrs */
-	andi	r10, r10, %lo(~STATUS_PIE)
-	wrctl	status, r10
-	br	need_resched
-#else
-	br	restore_all
+	call	preempt_schedule_irq
 #endif
+	br	restore_all
 
 /***********************************************************************
  * A few syscall wrappers

arch/powerpc/include/asm/kexec.h

@@ -86,6 +86,11 @@ extern int overlaps_crashkernel(unsigned long start, unsigned long size);
 extern void reserve_crashkernel(void);
 extern void machine_kexec_mask_interrupts(void);
 
+static inline bool kdump_in_progress(void)
+{
+	return crashing_cpu >= 0;
+}
+
 #else /* !CONFIG_KEXEC */
 static inline void crash_kexec_secondary(struct pt_regs *regs) { }
 
@@ -106,6 +111,11 @@ static inline int crash_shutdown_unregister(crash_shutdown_t handler)
 	return 0;
 }
 
+static inline bool kdump_in_progress(void)
+{
+	return false;
+}
+
 #endif /* CONFIG_KEXEC */
 #endif /* ! __ASSEMBLY__ */
 #endif /* __KERNEL__ */

arch/powerpc/include/asm/systbl.h

@@ -366,3 +366,4 @@ SYSCALL_SPU(seccomp)
 SYSCALL_SPU(getrandom)
 SYSCALL_SPU(memfd_create)
 SYSCALL_SPU(bpf)
+COMPAT_SYS(execveat)

arch/powerpc/include/asm/unistd.h

@@ -12,7 +12,7 @@
 #include <uapi/asm/unistd.h>
 
 
-#define __NR_syscalls		362
+#define __NR_syscalls		363
 
 #define __NR__exit __NR_exit
 #define NR_syscalls	__NR_syscalls

arch/powerpc/include/uapi/asm/unistd.h

@@ -384,5 +384,6 @@
 #define __NR_getrandom		359
 #define __NR_memfd_create	360
 #define __NR_bpf		361
+#define __NR_execveat		362
 
 #endif /* _UAPI_ASM_POWERPC_UNISTD_H_ */

arch/powerpc/kernel/machine_kexec_64.c

@@ -330,7 +330,7 @@ void default_machine_kexec(struct kimage *image)
         * using debugger IPI.
         */
 
-	if (crashing_cpu == -1)
+	if (!kdump_in_progress())
 		kexec_prepare_cpus();
 
 	pr_debug("kexec: Starting switchover sequence.\n");

arch/powerpc/kernel/smp.c

@@ -700,6 +700,7 @@ void start_secondary(void *unused)
 	smp_store_cpu_info(cpu);
 	set_dec(tb_ticks_per_jiffy);
 	preempt_disable();
+	cpu_callin_map[cpu] = 1;
 
 	if (smp_ops->setup_cpu)
 		smp_ops->setup_cpu(cpu);
@@ -738,14 +739,6 @@ void start_secondary(void *unused)
 	notify_cpu_starting(cpu);
 	set_cpu_online(cpu, true);
 
-	/*
-	 * CPU must be marked active and online before we signal back to the
-	 * master, because the scheduler needs to see the cpu_online and
-	 * cpu_active bits set.
-	 */
-	smp_wmb();
-	cpu_callin_map[cpu] = 1;
-
 	local_irq_enable();
 
 	cpu_startup_entry(CPUHP_ONLINE);

arch/powerpc/platforms/pseries/lpar.c

@@ -43,6 +43,7 @@
 #include <asm/trace.h>
 #include <asm/firmware.h>
 #include <asm/plpar_wrappers.h>
+#include <asm/kexec.h>
 #include <asm/fadump.h>
 
 #include "pseries.h"
@@ -267,8 +268,13 @@ static void pSeries_lpar_hptab_clear(void)
 		 * out to the user, but at least this will stop us from
 		 * continuing on further and creating an even more
 		 * difficult to debug situation.
+		 *
+		 * There is a known problem when kdump'ing, if cpus are offline
+		 * the above call will fail. Rather than panicking again, keep
+		 * going and hope the kdump kernel is also little endian, which
+		 * it usually is.
 		 */
-		if (rc)
+		if (rc && !kdump_in_progress())
 			panic("Could not enable big endian exceptions");
 	}
 #endif

arch/um/Kconfig.common

@@ -3,6 +3,7 @@ config UML
 	default y
 	select HAVE_ARCH_AUDITSYSCALL
 	select HAVE_UID16
+	select HAVE_FUTEX_CMPXCHG if FUTEX
 	select GENERIC_IRQ_SHOW
 	select GENERIC_CPU_DEVICES
 	select GENERIC_IO

arch/x86/kernel/acpi/boot.c

@@ -750,13 +750,13 @@ static int _acpi_map_lsapic(acpi_handle handle, int physid, int *pcpu)
 }
 
 /* wrapper to silence section mismatch warning */
-int __ref acpi_map_lsapic(acpi_handle handle, int physid, int *pcpu)
+int __ref acpi_map_cpu(acpi_handle handle, int physid, int *pcpu)
 {
 	return _acpi_map_lsapic(handle, physid, pcpu);
 }
-EXPORT_SYMBOL(acpi_map_lsapic);
+EXPORT_SYMBOL(acpi_map_cpu);
 
-int acpi_unmap_lsapic(int cpu)
+int acpi_unmap_cpu(int cpu)
 {
 #ifdef CONFIG_ACPI_NUMA
 	set_apicid_to_node(per_cpu(x86_cpu_to_apicid, cpu), NUMA_NO_NODE);
@@ -768,8 +768,7 @@ int acpi_unmap_lsapic(int cpu)
 
 	return (0);
 }
-
-EXPORT_SYMBOL(acpi_unmap_lsapic);
+EXPORT_SYMBOL(acpi_unmap_cpu);
 #endif				/* CONFIG_ACPI_HOTPLUG_CPU */
 
 int acpi_register_ioapic(acpi_handle handle, u64 phys_addr, u32 gsi_base)

arch/x86/um/sys_call_table_32.c

@@ -34,7 +34,7 @@ typedef asmlinkage void (*sys_call_ptr_t)(void);
 
 extern asmlinkage void sys_ni_syscall(void);
 
-const sys_call_ptr_t sys_call_table[] __cacheline_aligned = {
+const sys_call_ptr_t sys_call_table[] ____cacheline_aligned = {
 	/*
 	 * Smells like a compiler bug -- it doesn't work
 	 * when the & below is removed.

arch/x86/um/sys_call_table_64.c

@@ -47,7 +47,7 @@ typedef void (*sys_call_ptr_t)(void);
 
 extern void sys_ni_syscall(void);
 
-const sys_call_ptr_t sys_call_table[] __cacheline_aligned = {
+const sys_call_ptr_t sys_call_table[] ____cacheline_aligned = {
 	/*
 	 * Smells like a compiler bug -- it doesn't work
 	 * when the & below is removed.

crypto/af_alg.c

@@ -455,6 +455,9 @@ void af_alg_complete(struct crypto_async_request *req, int err)
 {
 	struct af_alg_completion *completion = req->data;
 
+	if (err == -EINPROGRESS)
+		return;
+
 	completion->err = err;
 	complete(&completion->completion);
 }

drivers/acpi/acpi_processor.c

@@ -170,7 +170,7 @@ static int acpi_processor_hotadd_init(struct acpi_processor *pr)
 	acpi_status status;
 	int ret;
 
-	if (pr->apic_id == -1)
+	if (pr->phys_id == -1)
 		return -ENODEV;
 
 	status = acpi_evaluate_integer(pr->handle, "_STA", NULL, &sta);
@@ -180,13 +180,13 @@ static int acpi_processor_hotadd_init(struct acpi_processor *pr)
 	cpu_maps_update_begin();
 	cpu_hotplug_begin();
 
-	ret = acpi_map_lsapic(pr->handle, pr->apic_id, &pr->id);
+	ret = acpi_map_cpu(pr->handle, pr->phys_id, &pr->id);
 	if (ret)
 		goto out;
 
 	ret = arch_register_cpu(pr->id);
 	if (ret) {
-		acpi_unmap_lsapic(pr->id);
+		acpi_unmap_cpu(pr->id);
 		goto out;
 	}
 
@@ -215,7 +215,7 @@ static int acpi_processor_get_info(struct acpi_device *device)
 	union acpi_object object = { 0 };
 	struct acpi_buffer buffer = { sizeof(union acpi_object), &object };
 	struct acpi_processor *pr = acpi_driver_data(device);
-	int apic_id, cpu_index, device_declaration = 0;
+	int phys_id, cpu_index, device_declaration = 0;
 	acpi_status status = AE_OK;
 	static int cpu0_initialized;
 	unsigned long long value;
@@ -262,15 +262,18 @@ static int acpi_processor_get_info(struct acpi_device *device)
 		pr->acpi_id = value;
 	}
 
-	apic_id = acpi_get_apicid(pr->handle, device_declaration, pr->acpi_id);
-	if (apic_id < 0)
-		acpi_handle_debug(pr->handle, "failed to get CPU APIC ID.\n");
-	pr->apic_id = apic_id;
+	phys_id = acpi_get_phys_id(pr->handle, device_declaration, pr->acpi_id);
+	if (phys_id < 0)
+		acpi_handle_debug(pr->handle, "failed to get CPU physical ID.\n");
+	pr->phys_id = phys_id;
 
-	cpu_index = acpi_map_cpuid(pr->apic_id, pr->acpi_id);
+	cpu_index = acpi_map_cpuid(pr->phys_id, pr->acpi_id);
 	if (!cpu0_initialized && !acpi_has_cpu_in_madt()) {
 		cpu0_initialized = 1;
-		/* Handle UP system running SMP kernel, with no LAPIC in MADT */
+		/*
+		 * Handle UP system running SMP kernel, with no CPU
+		 * entry in MADT
+		 */
 		if ((cpu_index == -1) && (num_online_cpus() == 1))
 			cpu_index = 0;
 	}
@@ -458,7 +461,7 @@ static void acpi_processor_remove(struct acpi_device *device)
 
 	/* Remove the CPU. */
 	arch_unregister_cpu(pr->id);
-	acpi_unmap_lsapic(pr->id);
+	acpi_unmap_cpu(pr->id);
 
 	cpu_hotplug_done();
 	cpu_maps_update_done();

drivers/acpi/processor_core.c

@@ -69,7 +69,7 @@ static int map_madt_entry(int type, u32 acpi_id)
 	unsigned long madt_end, entry;
 	static struct acpi_table_madt *madt;
 	static int read_madt;
-	int apic_id = -1;
+	int phys_id = -1;	/* CPU hardware ID */
 
 	if (!read_madt) {
 		if (ACPI_FAILURE(acpi_get_table(ACPI_SIG_MADT, 0,
@@ -79,7 +79,7 @@ static int map_madt_entry(int type, u32 acpi_id)
 	}
 
 	if (!madt)
-		return apic_id;
+		return phys_id;
 
 	entry = (unsigned long)madt;
 	madt_end = entry + madt->header.length;
@@ -91,18 +91,18 @@ static int map_madt_entry(int type, u32 acpi_id)
 		struct acpi_subtable_header *header =
 			(struct acpi_subtable_header *)entry;
 		if (header->type == ACPI_MADT_TYPE_LOCAL_APIC) {
-			if (!map_lapic_id(header, acpi_id, &apic_id))
+			if (!map_lapic_id(header, acpi_id, &phys_id))
 				break;
 		} else if (header->type == ACPI_MADT_TYPE_LOCAL_X2APIC) {
-			if (!map_x2apic_id(header, type, acpi_id, &apic_id))
+			if (!map_x2apic_id(header, type, acpi_id, &phys_id))
 				break;
 		} else if (header->type == ACPI_MADT_TYPE_LOCAL_SAPIC) {
-			if (!map_lsapic_id(header, type, acpi_id, &apic_id))
+			if (!map_lsapic_id(header, type, acpi_id, &phys_id))
 				break;
 		}
 		entry += header->length;
 	}
-	return apic_id;
+	return phys_id;
 }
 
 static int map_mat_entry(acpi_handle handle, int type, u32 acpi_id)
@@ -110,7 +110,7 @@ static int map_mat_entry(acpi_handle handle, int type, u32 acpi_id)
 	struct acpi_buffer buffer = { ACPI_ALLOCATE_BUFFER, NULL };
 	union acpi_object *obj;
 	struct acpi_subtable_header *header;
-	int apic_id = -1;
+	int phys_id = -1;
 
 	if (ACPI_FAILURE(acpi_evaluate_object(handle, "_MAT", NULL, &buffer)))
 		goto exit;
@@ -126,38 +126,38 @@ static int map_mat_entry(acpi_handle handle, int type, u32 acpi_id)
 
 	header = (struct acpi_subtable_header *)obj->buffer.pointer;
 	if (header->type == ACPI_MADT_TYPE_LOCAL_APIC)
-		map_lapic_id(header, acpi_id, &apic_id);
+		map_lapic_id(header, acpi_id, &phys_id);
 	else if (header->type == ACPI_MADT_TYPE_LOCAL_SAPIC)
-		map_lsapic_id(header, type, acpi_id, &apic_id);
+		map_lsapic_id(header, type, acpi_id, &phys_id);
 	else if (header->type == ACPI_MADT_TYPE_LOCAL_X2APIC)
-		map_x2apic_id(header, type, acpi_id, &apic_id);
+		map_x2apic_id(header, type, acpi_id, &phys_id);
 
 exit:
 	kfree(buffer.pointer);
-	return apic_id;
+	return phys_id;
 }
 
-int acpi_get_apicid(acpi_handle handle, int type, u32 acpi_id)
+int acpi_get_phys_id(acpi_handle handle, int type, u32 acpi_id)
 {
-	int apic_id;
+	int phys_id;
 
-	apic_id = map_mat_entry(handle, type, acpi_id);
-	if (apic_id == -1)
-		apic_id = map_madt_entry(type, acpi_id);
+	phys_id = map_mat_entry(handle, type, acpi_id);
+	if (phys_id == -1)
+		phys_id = map_madt_entry(type, acpi_id);
 
-	return apic_id;
+	return phys_id;
 }
 
-int acpi_map_cpuid(int apic_id, u32 acpi_id)
+int acpi_map_cpuid(int phys_id, u32 acpi_id)
 {
 #ifdef CONFIG_SMP
 	int i;
 #endif
 
-	if (apic_id == -1) {
+	if (phys_id == -1) {
 		/*
 		 * On UP processor, there is no _MAT or MADT table.
-		 * So above apic_id is always set to -1.
+		 * So above phys_id is always set to -1.
 		 *
 		 * BIOS may define multiple CPU handles even for UP processor.
 		 * For example,
@@ -170,7 +170,7 @@ int acpi_map_cpuid(int apic_id, u32 acpi_id)
 		 *     Processor (CPU3, 0x03, 0x00000410, 0x06) {}
 		 * }
 		 *
-		 * Ignores apic_id and always returns 0 for the processor
+		 * Ignores phys_id and always returns 0 for the processor
 		 * handle with acpi id 0 if nr_cpu_ids is 1.
 		 * This should be the case if SMP tables are not found.
 		 * Return -1 for other CPU's handle.
@@ -178,28 +178,28 @@ int acpi_map_cpuid(int apic_id, u32 acpi_id)
 		if (nr_cpu_ids <= 1 && acpi_id == 0)
 			return acpi_id;
 		else
-			return apic_id;
+			return phys_id;
 	}
 
 #ifdef CONFIG_SMP
 	for_each_possible_cpu(i) {
-		if (cpu_physical_id(i) == apic_id)
+		if (cpu_physical_id(i) == phys_id)
 			return i;
 	}
 #else
 	/* In UP kernel, only processor 0 is valid */
-	if (apic_id == 0)
-		return apic_id;
+	if (phys_id == 0)
+		return phys_id;
 #endif
 	return -1;
 }
 
 int acpi_get_cpuid(acpi_handle handle, int type, u32 acpi_id)
 {
-	int apic_id;
+	int phys_id;
 
-	apic_id = acpi_get_apicid(handle, type, acpi_id);
+	phys_id = acpi_get_phys_id(handle, type, acpi_id);
 
-	return acpi_map_cpuid(apic_id, acpi_id);
+	return acpi_map_cpuid(phys_id, acpi_id);
 }
 EXPORT_SYMBOL_GPL(acpi_get_cpuid);

drivers/acpi/processor_idle.c

@@ -985,8 +985,6 @@ static int acpi_processor_setup_cpuidle_states(struct acpi_processor *pr)
 		state->flags = 0;
 		switch (cx->type) {
 			case ACPI_STATE_C1:
-			if (cx->entry_method != ACPI_CSTATE_FFH)
-				state->flags |= CPUIDLE_FLAG_TIME_INVALID;
 
 			state->enter = acpi_idle_enter_c1;
 			state->enter_dead = acpi_idle_play_dead;

drivers/acpi/video.c

@@ -505,6 +505,33 @@ static struct dmi_system_id video_dmi_table[] __initdata = {
 		DMI_MATCH(DMI_PRODUCT_NAME, "HP ENVY 15 Notebook PC"),
 		},
 	},
+
+	{
+	 .callback = video_disable_native_backlight,
+	 .ident = "SAMSUNG 870Z5E/880Z5E/680Z5E",
+	 .matches = {
+		DMI_MATCH(DMI_SYS_VENDOR, "SAMSUNG ELECTRONICS CO., LTD."),
+		DMI_MATCH(DMI_PRODUCT_NAME, "870Z5E/880Z5E/680Z5E"),
+		},
+	},
+	{
+	 .callback = video_disable_native_backlight,
+	 .ident = "SAMSUNG 370R4E/370R4V/370R5E/3570RE/370R5V",
+	 .matches = {
+		DMI_MATCH(DMI_SYS_VENDOR, "SAMSUNG ELECTRONICS CO., LTD."),
+		DMI_MATCH(DMI_PRODUCT_NAME, "370R4E/370R4V/370R5E/3570RE/370R5V"),
+		},
+	},
+
+	{
+	 /* https://bugzilla.redhat.com/show_bug.cgi?id=1163574 */
+	 .callback = video_disable_native_backlight,
+	 .ident = "Dell XPS15 L521X",
+	 .matches = {
+		DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."),
+		DMI_MATCH(DMI_PRODUCT_NAME, "XPS L521X"),
+		},
+	},
 	{}
 };
 

drivers/base/power/domain.c

@@ -2088,7 +2088,7 @@ EXPORT_SYMBOL_GPL(of_genpd_del_provider);
  * Returns a valid pointer to struct generic_pm_domain on success or ERR_PTR()
  * on failure.
  */
-static struct generic_pm_domain *of_genpd_get_from_provider(
+struct generic_pm_domain *of_genpd_get_from_provider(
 					struct of_phandle_args *genpdspec)
 {
 	struct generic_pm_domain *genpd = ERR_PTR(-ENOENT);
@@ -2108,6 +2108,7 @@ static struct generic_pm_domain *of_genpd_get_from_provider(
 
 	return genpd;
 }
+EXPORT_SYMBOL_GPL(of_genpd_get_from_provider);
 
 /**
  * genpd_dev_pm_detach - Detach a device from its PM domain.

drivers/base/power/opp.c

@@ -108,6 +108,14 @@ static LIST_HEAD(dev_opp_list);
 /* Lock to allow exclusive modification to the device and opp lists */
 static DEFINE_MUTEX(dev_opp_list_lock);
 
+#define opp_rcu_lockdep_assert()					\
+do {									\
+	rcu_lockdep_assert(rcu_read_lock_held() ||			\
+				lockdep_is_held(&dev_opp_list_lock),	\
+			   "Missing rcu_read_lock() or "		\
+			   "dev_opp_list_lock protection");		\
+} while (0)
+
 /**
  * find_device_opp() - find device_opp struct using device pointer
  * @dev:	device pointer used to lookup device OPPs
@@ -208,9 +216,7 @@ EXPORT_SYMBOL_GPL(dev_pm_opp_get_freq);
  * This function returns the number of available opps if there are any,
  * else returns 0 if none or the corresponding error value.
  *
- * Locking: This function must be called under rcu_read_lock(). This function
- * internally references two RCU protected structures: device_opp and opp which
- * are safe as long as we are under a common RCU locked section.
+ * Locking: This function takes rcu_read_lock().
  */
 int dev_pm_opp_get_opp_count(struct device *dev)
 {
@@ -218,11 +224,14 @@ int dev_pm_opp_get_opp_count(struct device *dev)
 	struct dev_pm_opp *temp_opp;
 	int count = 0;
 
+	rcu_read_lock();
+
 	dev_opp = find_device_opp(dev);
 	if (IS_ERR(dev_opp)) {
-		int r = PTR_ERR(dev_opp);
-		dev_err(dev, "%s: device OPP not found (%d)\n", __func__, r);
-		return r;
+		count = PTR_ERR(dev_opp);
+		dev_err(dev, "%s: device OPP not found (%d)\n",
+			__func__, count);
+		goto out_unlock;
 	}
 
 	list_for_each_entry_rcu(temp_opp, &dev_opp->opp_list, node) {
@@ -230,6 +239,8 @@ int dev_pm_opp_get_opp_count(struct device *dev)
 			count++;
 	}
 
+out_unlock:
+	rcu_read_unlock();
 	return count;
 }
 EXPORT_SYMBOL_GPL(dev_pm_opp_get_opp_count);
@@ -267,6 +278,8 @@ struct dev_pm_opp *dev_pm_opp_find_freq_exact(struct device *dev,
 	struct device_opp *dev_opp;
 	struct dev_pm_opp *temp_opp, *opp = ERR_PTR(-ERANGE);
 
+	opp_rcu_lockdep_assert();
+
 	dev_opp = find_device_opp(dev);
 	if (IS_ERR(dev_opp)) {
 		int r = PTR_ERR(dev_opp);
@@ -313,6 +326,8 @@ struct dev_pm_opp *dev_pm_opp_find_freq_ceil(struct device *dev,
 	struct device_opp *dev_opp;
 	struct dev_pm_opp *temp_opp, *opp = ERR_PTR(-ERANGE);
 
+	opp_rcu_lockdep_assert();
+
 	if (!dev || !freq) {
 		dev_err(dev, "%s: Invalid argument freq=%p\n", __func__, freq);
 		return ERR_PTR(-EINVAL);
@@ -361,6 +376,8 @@ struct dev_pm_opp *dev_pm_opp_find_freq_floor(struct device *dev,
 	struct device_opp *dev_opp;
 	struct dev_pm_opp *temp_opp, *opp = ERR_PTR(-ERANGE);
 
+	opp_rcu_lockdep_assert();
+
 	if (!dev || !freq) {
 		dev_err(dev, "%s: Invalid argument freq=%p\n", __func__, freq);
 		return ERR_PTR(-EINVAL);
@@ -783,9 +800,15 @@ void of_free_opp_table(struct device *dev)
 
 	/* Check for existing list for 'dev' */
 	dev_opp = find_device_opp(dev);
-	if (WARN(IS_ERR(dev_opp), "%s: dev_opp: %ld\n", dev_name(dev),
-		 PTR_ERR(dev_opp)))
+	if (IS_ERR(dev_opp)) {
+		int error = PTR_ERR(dev_opp);
+		if (error != -ENODEV)
+			WARN(1, "%s: dev_opp: %d\n",
+			     IS_ERR_OR_NULL(dev) ?
+					"Invalid device" : dev_name(dev),
+			     error);
 		return;
+	}
 
 	/* Hold our list modification lock here */
 	mutex_lock(&dev_opp_list_lock);

drivers/clocksource/arm_arch_timer.c

@@ -462,7 +462,7 @@ static void __init arch_counter_register(unsigned type)
 
 	/* Register the CP15 based counter if we have one */
 	if (type & ARCH_CP15_TIMER) {
-		if (arch_timer_use_virtual)
+		if (IS_ENABLED(CONFIG_ARM64) || arch_timer_use_virtual)
 			arch_timer_read_counter = arch_counter_get_cntvct;
 		else
 			arch_timer_read_counter = arch_counter_get_cntpct;

drivers/cpufreq/cpufreq-dt.c

@@ -211,6 +211,17 @@ static int cpufreq_init(struct cpufreq_policy *policy)
 	/* OPPs might be populated at runtime, don't check for error here */
 	of_init_opp_table(cpu_dev);
 
+	/*
+	 * But we need OPP table to function so if it is not there let's
+	 * give platform code chance to provide it for us.
+	 */
+	ret = dev_pm_opp_get_opp_count(cpu_dev);
+	if (ret <= 0) {
+		pr_debug("OPP table is not ready, deferring probe\n");
+		ret = -EPROBE_DEFER;
+		goto out_free_opp;
+	}
+
 	priv = kzalloc(sizeof(*priv), GFP_KERNEL);
 	if (!priv) {
 		ret = -ENOMEM;

drivers/cpufreq/cpufreq.c

@@ -2028,6 +2028,12 @@ static int __cpufreq_governor(struct cpufreq_policy *policy,
 	/* Don't start any governor operations if we are entering suspend */
 	if (cpufreq_suspended)
 		return 0;
+	/*
+	 * Governor might not be initiated here if ACPI _PPC changed
+	 * notification happened, so check it.
+	 */
+	if (!policy->governor)
+		return -EINVAL;
 
 	if (policy->governor->max_transition_latency &&
 	    policy->cpuinfo.transition_latency >

drivers/cpuidle/governors/ladder.c

@@ -79,12 +79,7 @@ static int ladder_select_state(struct cpuidle_driver *drv,
 
 	last_state = &ldev->states[last_idx];
 
-	if (!(drv->states[last_idx].flags & CPUIDLE_FLAG_TIME_INVALID)) {
-		last_residency = cpuidle_get_last_residency(dev) - \
-					 drv->states[last_idx].exit_latency;
-	}
-	else
-		last_residency = last_state->threshold.promotion_time + 1;
+	last_residency = cpuidle_get_last_residency(dev) - drv->states[last_idx].exit_latency;
 
 	/* consider promotion */
 	if (last_idx < drv->state_count - 1 &&

drivers/cpuidle/governors/menu.c

@@ -396,8 +396,8 @@ static void menu_update(struct cpuidle_driver *drv, struct cpuidle_device *dev)
 	 * power state and occurrence of the wakeup event.
 	 *
 	 * If the entered idle state didn't support residency measurements,
-	 * we are basically lost in the dark how much time passed.
-	 * As a compromise, assume we slept for the whole expected time.
+	 * we use them anyway if they are short, and if long,
+	 * truncate to the whole expected time.
 	 *
 	 * Any measured amount of time will include the exit latency.
 	 * Since we are interested in when the wakeup begun, not when it
@@ -405,22 +405,17 @@ static void menu_update(struct cpuidle_driver *drv, struct cpuidle_device *dev)
 	 * the measured amount of time is less than the exit latency,
 	 * assume the state was never reached and the exit latency is 0.
 	 */
-	if (unlikely(target->flags & CPUIDLE_FLAG_TIME_INVALID)) {
-		/* Use timer value as is */
-		measured_us = data->next_timer_us;
 
-	} else {
-		/* Use measured value */
-		measured_us = cpuidle_get_last_residency(dev);
+	/* measured value */
+	measured_us = cpuidle_get_last_residency(dev);
 
-		/* Deduct exit latency */
-		if (measured_us > target->exit_latency)
-			measured_us -= target->exit_latency;
+	/* Deduct exit latency */
+	if (measured_us > target->exit_latency)
+		measured_us -= target->exit_latency;
 
-		/* Make sure our coefficients do not exceed unity */
-		if (measured_us > data->next_timer_us)
-			measured_us = data->next_timer_us;
-	}
+	/* Make sure our coefficients do not exceed unity */
+	if (measured_us > data->next_timer_us)
+		measured_us = data->next_timer_us;
 
 	/* Update our correction ratio */
 	new_factor = data->correction_factor[data->bucket];

drivers/input/evdev.c

@@ -28,6 +28,13 @@
 #include <linux/cdev.h>
 #include "input-compat.h"
 
+enum evdev_clock_type {
+	EV_CLK_REAL = 0,
+	EV_CLK_MONO,
+	EV_CLK_BOOT,
+	EV_CLK_MAX
+};
+
 struct evdev {
 	int open;
 	struct input_handle handle;
@@ -49,12 +56,32 @@ struct evdev_client {
 	struct fasync_struct *fasync;
 	struct evdev *evdev;
 	struct list_head node;
-	int clkid;
+	int clk_type;
 	bool revoked;
 	unsigned int bufsize;
 	struct input_event buffer[];
 };
 
+static int evdev_set_clk_type(struct evdev_client *client, unsigned int clkid)
+{
+	switch (clkid) {
+
+	case CLOCK_REALTIME:
+		client->clk_type = EV_CLK_REAL;
+		break;
+	case CLOCK_MONOTONIC:
+		client->clk_type = EV_CLK_MONO;
+		break;
+	case CLOCK_BOOTTIME:
+		client->clk_type = EV_CLK_BOOT;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
 /* flush queued events of type @type, caller must hold client->buffer_lock */
 static void __evdev_flush_queue(struct evdev_client *client, unsigned int type)
 {
@@ -108,8 +135,11 @@ static void evdev_queue_syn_dropped(struct evdev_client *client)
 	struct input_event ev;
 	ktime_t time;
 
-	time = (client->clkid == CLOCK_MONOTONIC) ?
-		ktime_get() : ktime_get_real();
+	time = client->clk_type == EV_CLK_REAL ?
+			ktime_get_real() :
+			client->clk_type == EV_CLK_MONO ?
+				ktime_get() :
+				ktime_get_boottime();
 
 	ev.time = ktime_to_timeval(time);
 	ev.type = EV_SYN;
@@ -159,7 +189,7 @@ static void __pass_event(struct evdev_client *client,
 
 static void evdev_pass_values(struct evdev_client *client,
 			const struct input_value *vals, unsigned int count,
-			ktime_t mono, ktime_t real)
+			ktime_t *ev_time)
 {
 	struct evdev *evdev = client->evdev;
 	const struct input_value *v;
@@ -169,8 +199,7 @@ static void evdev_pass_values(struct evdev_client *client,
 	if (client->revoked)
 		return;
 
-	event.time = ktime_to_timeval(client->clkid == CLOCK_MONOTONIC ?
-				      mono : real);
+	event.time = ktime_to_timeval(ev_time[client->clk_type]);
 
 	/* Interrupts are disabled, just acquire the lock. */
 	spin_lock(&client->buffer_lock);
@@ -198,21 +227,22 @@ static void evdev_events(struct input_handle *handle,
 {
 	struct evdev *evdev = handle->private;
 	struct evdev_client *client;
-	ktime_t time_mono, time_real;
+	ktime_t ev_time[EV_CLK_MAX];
 
-	time_mono = ktime_get();
-	time_real = ktime_mono_to_real(time_mono);
+	ev_time[EV_CLK_MONO] = ktime_get();
+	ev_time[EV_CLK_REAL] = ktime_mono_to_real(ev_time[EV_CLK_MONO]);
+	ev_time[EV_CLK_BOOT] = ktime_mono_to_any(ev_time[EV_CLK_MONO],
+						 TK_OFFS_BOOT);
 
 	rcu_read_lock();
 
 	client = rcu_dereference(evdev->grab);
 
 	if (client)
-		evdev_pass_values(client, vals, count, time_mono, time_real);
+		evdev_pass_values(client, vals, count, ev_time);
 	else
 		list_for_each_entry_rcu(client, &evdev->client_list, node)
-			evdev_pass_values(client, vals, count,
-					  time_mono, time_real);
+			evdev_pass_values(client, vals, count, ev_time);
 
 	rcu_read_unlock();
 }
@@ -877,10 +907,8 @@ static long evdev_do_ioctl(struct file *file, unsigned int cmd,
 	case EVIOCSCLOCKID:
 		if (copy_from_user(&i, p, sizeof(unsigned int)))
 			return -EFAULT;
-		if (i != CLOCK_MONOTONIC && i != CLOCK_REALTIME)
-			return -EINVAL;
-		client->clkid = i;
-		return 0;
+
+		return evdev_set_clk_type(client, i);
 
 	case EVIOCGKEYCODE:
 		return evdev_handle_get_keycode(dev, p);

drivers/input/input.c

@@ -1974,18 +1974,22 @@ static unsigned int input_estimate_events_per_packet(struct input_dev *dev)
 
 	events = mt_slots + 1; /* count SYN_MT_REPORT and SYN_REPORT */
 
-	for (i = 0; i < ABS_CNT; i++) {
-		if (test_bit(i, dev->absbit)) {
-			if (input_is_mt_axis(i))
-				events += mt_slots;
-			else
-				events++;
+	if (test_bit(EV_ABS, dev->evbit)) {
+		for (i = 0; i < ABS_CNT; i++) {
+			if (test_bit(i, dev->absbit)) {
+				if (input_is_mt_axis(i))
+					events += mt_slots;
+				else
+					events++;
+			}
 		}
 	}
 
-	for (i = 0; i < REL_CNT; i++)
-		if (test_bit(i, dev->relbit))
-			events++;
+	if (test_bit(EV_REL, dev->evbit)) {
+		for (i = 0; i < REL_CNT; i++)
+			if (test_bit(i, dev->relbit))
+				events++;
+	}
 
 	/* Make room for KEY and MSC events */
 	events += 7;

drivers/input/keyboard/Kconfig

@@ -559,6 +559,7 @@ config KEYBOARD_SH_KEYSC
 config KEYBOARD_STMPE
 	tristate "STMPE keypad support"
 	depends on MFD_STMPE
+	depends on OF
 	select INPUT_MATRIXKMAP
 	help
 	  Say Y here if you want to use the keypad controller on STMPE I/O

drivers/input/keyboard/gpio_keys.c

@@ -35,9 +35,13 @@
 struct gpio_button_data {
 	const struct gpio_keys_button *button;
 	struct input_dev *input;
-	struct timer_list timer;
-	struct work_struct work;
-	unsigned int timer_debounce;	/* in msecs */
+
+	struct timer_list release_timer;
+	unsigned int release_delay;	/* in msecs, for IRQ-only buttons */
+
+	struct delayed_work work;
+	unsigned int software_debounce;	/* in msecs, for GPIO-driven buttons */
+
 	unsigned int irq;
 	spinlock_t lock;
 	bool disabled;
@@ -116,11 +120,14 @@ static void gpio_keys_disable_button(struct gpio_button_data *bdata)
 {
 	if (!bdata->disabled) {
 		/*
-		 * Disable IRQ and possible debouncing timer.
+		 * Disable IRQ and associated timer/work structure.
 		 */
 		disable_irq(bdata->irq);
-		if (bdata->timer_debounce)
-			del_timer_sync(&bdata->timer);
+
+		if (gpio_is_valid(bdata->button->gpio))
+			cancel_delayed_work_sync(&bdata->work);
+		else
+			del_timer_sync(&bdata->release_timer);
 
 		bdata->disabled = true;
 	}
@@ -343,7 +350,7 @@ static void gpio_keys_gpio_report_event(struct gpio_button_data *bdata)
 static void gpio_keys_gpio_work_func(struct work_struct *work)
 {
 	struct gpio_button_data *bdata =
-		container_of(work, struct gpio_button_data, work);
+		container_of(work, struct gpio_button_data, work.work);
 
 	gpio_keys_gpio_report_event(bdata);
 
@@ -351,13 +358,6 @@ static void gpio_keys_gpio_work_func(struct work_struct *work)
 		pm_relax(bdata->input->dev.parent);
 }
 
-static void gpio_keys_gpio_timer(unsigned long _data)
-{
-	struct gpio_button_data *bdata = (struct gpio_button_data *)_data;
-
-	schedule_work(&bdata->work);
-}
-
 static irqreturn_t gpio_keys_gpio_isr(int irq, void *dev_id)
 {
 	struct gpio_button_data *bdata = dev_id;
@@ -366,11 +366,10 @@ static irqreturn_t gpio_keys_gpio_isr(int irq, void *dev_id)
 
 	if (bdata->button->wakeup)
 		pm_stay_awake(bdata->input->dev.parent);
-	if (bdata->timer_debounce)
-		mod_timer(&bdata->timer,
-			jiffies + msecs_to_jiffies(bdata->timer_debounce));
-	else
-		schedule_work(&bdata->work);
+
+	mod_delayed_work(system_wq,
+			 &bdata->work,
+			 msecs_to_jiffies(bdata->software_debounce));
 
 	return IRQ_HANDLED;
 }
@@ -408,7 +407,7 @@ static irqreturn_t gpio_keys_irq_isr(int irq, void *dev_id)
 		input_event(input, EV_KEY, button->code, 1);
 		input_sync(input);
 
-		if (!bdata->timer_debounce) {
+		if (!bdata->release_delay) {
 			input_event(input, EV_KEY, button->code, 0);
 			input_sync(input);
 			goto out;
@@ -417,9 +416,9 @@ static irqreturn_t gpio_keys_irq_isr(int irq, void *dev_id)
 		bdata->key_pressed = true;
 	}
 
-	if (bdata->timer_debounce)
-		mod_timer(&bdata->timer,
-			jiffies + msecs_to_jiffies(bdata->timer_debounce));
+	if (bdata->release_delay)
+		mod_timer(&bdata->release_timer,
+			jiffies + msecs_to_jiffies(bdata->release_delay));
 out:
 	spin_unlock_irqrestore(&bdata->lock, flags);
 	return IRQ_HANDLED;
@@ -429,10 +428,10 @@ static void gpio_keys_quiesce_key(void *data)
 {
 	struct gpio_button_data *bdata = data;
 
-	if (bdata->timer_debounce)
-		del_timer_sync(&bdata->timer);
-
-	cancel_work_sync(&bdata->work);
+	if (gpio_is_valid(bdata->button->gpio))
+		cancel_delayed_work_sync(&bdata->work);
+	else
+		del_timer_sync(&bdata->release_timer);
 }
 
 static int gpio_keys_setup_key(struct platform_device *pdev,
@@ -466,23 +465,25 @@ static int gpio_keys_setup_key(struct platform_device *pdev,
 					button->debounce_interval * 1000);
 			/* use timer if gpiolib doesn't provide debounce */
 			if (error < 0)
-				bdata->timer_debounce =
+				bdata->software_debounce =
 						button->debounce_interval;
 		}
 
-		irq = gpio_to_irq(button->gpio);
-		if (irq < 0) {
-			error = irq;
-			dev_err(dev,
-				"Unable to get irq number for GPIO %d, error %d\n",
-				button->gpio, error);
-			return error;
+		if (button->irq) {
+			bdata->irq = button->irq;
+		} else {
+			irq = gpio_to_irq(button->gpio);
+			if (irq < 0) {
+				error = irq;
+				dev_err(dev,
+					"Unable to get irq number for GPIO %d, error %d\n",
+					button->gpio, error);
+				return error;
+			}
+			bdata->irq = irq;
 		}
-		bdata->irq = irq;
 
-		INIT_WORK(&bdata->work, gpio_keys_gpio_work_func);
-		setup_timer(&bdata->timer,
-			    gpio_keys_gpio_timer, (unsigned long)bdata);
+		INIT_DELAYED_WORK(&bdata->work, gpio_keys_gpio_work_func);
 
 		isr = gpio_keys_gpio_isr;
 		irqflags = IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING;
@@ -499,8 +500,8 @@ static int gpio_keys_setup_key(struct platform_device *pdev,
 			return -EINVAL;
 		}
 
-		bdata->timer_debounce = button->debounce_interval;
-		setup_timer(&bdata->timer,
+		bdata->release_delay = button->debounce_interval;
+		setup_timer(&bdata->release_timer,
 			    gpio_keys_irq_timer, (unsigned long)bdata);
 
 		isr = gpio_keys_irq_isr;
@@ -510,7 +511,7 @@ static int gpio_keys_setup_key(struct platform_device *pdev,
 	input_set_capability(input, button->type ?: EV_KEY, button->code);
 
 	/*
-	 * Install custom action to cancel debounce timer and
+	 * Install custom action to cancel release timer and
 	 * workqueue item.
 	 */
 	error = devm_add_action(&pdev->dev, gpio_keys_quiesce_key, bdata);
@@ -618,33 +619,30 @@ gpio_keys_get_devtree_pdata(struct device *dev)
 
 	i = 0;
 	for_each_child_of_node(node, pp) {
-		int gpio = -1;
 		enum of_gpio_flags flags;
 
 		button = &pdata->buttons[i++];
 
-		if (!of_find_property(pp, "gpios", NULL)) {
-			button->irq = irq_of_parse_and_map(pp, 0);
-			if (button->irq == 0) {
-				i--;
-				pdata->nbuttons--;
-				dev_warn(dev, "Found button without gpios or irqs\n");
-				continue;
-			}
-		} else {
-			gpio = of_get_gpio_flags(pp, 0, &flags);
-			if (gpio < 0) {
-				error = gpio;
+		button->gpio = of_get_gpio_flags(pp, 0, &flags);
+		if (button->gpio < 0) {
+			error = button->gpio;
+			if (error != -ENOENT) {
 				if (error != -EPROBE_DEFER)
 					dev_err(dev,
 						"Failed to get gpio flags, error: %d\n",
 						error);
 				return ERR_PTR(error);
 			}
+		} else {
+			button->active_low = flags & OF_GPIO_ACTIVE_LOW;
 		}
 
-		button->gpio = gpio;
-		button->active_low = flags & OF_GPIO_ACTIVE_LOW;
+		button->irq = irq_of_parse_and_map(pp, 0);
+
+		if (!gpio_is_valid(button->gpio) && !button->irq) {
+			dev_err(dev, "Found button without gpios or irqs\n");
+			return ERR_PTR(-EINVAL);
+		}
 
 		if (of_property_read_u32(pp, "linux,code", &button->code)) {
 			dev_err(dev, "Button without keycode: 0x%x\n",
@@ -659,6 +657,8 @@ gpio_keys_get_devtree_pdata(struct device *dev)
 
 		button->wakeup = !!of_get_property(pp, "gpio-key,wakeup", NULL);
 
+		button->can_disable = !!of_get_property(pp, "linux,can-disable", NULL);
+
 		if (of_property_read_u32(pp, "debounce-interval",
 					 &button->debounce_interval))
 			button->debounce_interval = 5;

drivers/input/keyboard/hil_kbd.c

@@ -473,7 +473,7 @@ static int hil_dev_connect(struct serio *serio, struct serio_driver *drv)
 	if (error)
 		goto bail1;
 
-	init_completion(&dev->cmd_done);
+	reinit_completion(&dev->cmd_done);
 	serio_write(serio, 0);
 	serio_write(serio, 0);
 	serio_write(serio, HIL_PKT_CMD >> 8);
@@ -482,7 +482,7 @@ static int hil_dev_connect(struct serio *serio, struct serio_driver *drv)
 	if (error)
 		goto bail1;
 
-	init_completion(&dev->cmd_done);
+	reinit_completion(&dev->cmd_done);
 	serio_write(serio, 0);
 	serio_write(serio, 0);
 	serio_write(serio, HIL_PKT_CMD >> 8);
@@ -491,7 +491,7 @@ static int hil_dev_connect(struct serio *serio, struct serio_driver *drv)
 	if (error)
 		goto bail1;
 
-	init_completion(&dev->cmd_done);
+	reinit_completion(&dev->cmd_done);
 	serio_write(serio, 0);
 	serio_write(serio, 0);
 	serio_write(serio, HIL_PKT_CMD >> 8);

drivers/input/keyboard/stmpe-keypad.c

@@ -45,13 +45,14 @@
 #define STMPE_KEYPAD_MAX_ROWS		8
 #define STMPE_KEYPAD_MAX_COLS		8
 #define STMPE_KEYPAD_ROW_SHIFT		3
-#define STMPE_KEYPAD_KEYMAP_SIZE	\
+#define STMPE_KEYPAD_KEYMAP_MAX_SIZE \
 	(STMPE_KEYPAD_MAX_ROWS * STMPE_KEYPAD_MAX_COLS)
 
 /**
  * struct stmpe_keypad_variant - model-specific attributes
  * @auto_increment: whether the KPC_DATA_BYTE register address
  *		    auto-increments on multiple read
+ * @set_pullup: whether the pins need to have their pull-ups set
  * @num_data: number of data bytes
  * @num_normal_data: number of normal keys' data bytes
  * @max_cols: maximum number of columns supported
@@ -61,6 +62,7 @@
  */
 struct stmpe_keypad_variant {
 	bool		auto_increment;
+	bool		set_pullup;
 	int		num_data;
 	int		num_normal_data;
 	int		max_cols;
@@ -81,6 +83,7 @@ static const struct stmpe_keypad_variant stmpe_keypad_variants[] = {
 	},
 	[STMPE2401] = {
 		.auto_increment		= false,
+		.set_pullup		= true,
 		.num_data		= 3,
 		.num_normal_data	= 2,
 		.max_cols		= 8,
@@ -90,6 +93,7 @@ static const struct stmpe_keypad_variant stmpe_keypad_variants[] = {
 	},
 	[STMPE2403] = {
 		.auto_increment		= true,
+		.set_pullup		= true,
 		.num_data		= 5,
 		.num_normal_data	= 3,
 		.max_cols		= 8,
@@ -99,16 +103,30 @@ static const struct stmpe_keypad_variant stmpe_keypad_variants[] = {
 	},
 };
 
+/**
+ * struct stmpe_keypad - STMPE keypad state container
+ * @stmpe: pointer to parent STMPE device
+ * @input: spawned input device
+ * @variant: STMPE variant
+ * @debounce_ms: debounce interval, in ms.  Maximum is
+ *		 %STMPE_KEYPAD_MAX_DEBOUNCE.
+ * @scan_count: number of key scanning cycles to confirm key data.
+ *		Maximum is %STMPE_KEYPAD_MAX_SCAN_COUNT.
+ * @no_autorepeat: disable key autorepeat
+ * @rows: bitmask for the rows
+ * @cols: bitmask for the columns
+ * @keymap: the keymap
+ */
 struct stmpe_keypad {
 	struct stmpe *stmpe;
 	struct input_dev *input;
 	const struct stmpe_keypad_variant *variant;
-	const struct stmpe_keypad_platform_data *plat;
-
+	unsigned int debounce_ms;
+	unsigned int scan_count;
+	bool no_autorepeat;
 	unsigned int rows;
 	unsigned int cols;
-
-	unsigned short keymap[STMPE_KEYPAD_KEYMAP_SIZE];
+	unsigned short keymap[STMPE_KEYPAD_KEYMAP_MAX_SIZE];
 };
 
 static int stmpe_keypad_read_data(struct stmpe_keypad *keypad, u8 *data)
@@ -171,7 +189,10 @@ static int stmpe_keypad_altfunc_init(struct stmpe_keypad *keypad)
 	unsigned int col_gpios = variant->col_gpios;
 	unsigned int row_gpios = variant->row_gpios;
 	struct stmpe *stmpe = keypad->stmpe;
+	u8 pureg = stmpe->regs[STMPE_IDX_GPPUR_LSB];
 	unsigned int pins = 0;
+	unsigned int pu_pins = 0;
+	int ret;
 	int i;
 
 	/*
@@ -188,8 +209,10 @@ static int stmpe_keypad_altfunc_init(struct stmpe_keypad *keypad)
 	for (i = 0; i < variant->max_cols; i++) {
 		int num = __ffs(col_gpios);
 
-		if (keypad->cols & (1 << i))
+		if (keypad->cols & (1 << i)) {
 			pins |= 1 << num;
+			pu_pins |= 1 << num;
+		}
 
 		col_gpios &= ~(1 << num);
 	}
@@ -203,20 +226,43 @@ static int stmpe_keypad_altfunc_init(struct stmpe_keypad *keypad)
 		row_gpios &= ~(1 << num);
 	}
 
-	return stmpe_set_altfunc(stmpe, pins, STMPE_BLOCK_KEYPAD);
+	ret = stmpe_set_altfunc(stmpe, pins, STMPE_BLOCK_KEYPAD);
+	if (ret)
+		return ret;
+
+	/*
+	 * On STMPE24xx, set pin bias to pull-up on all keypad input
+	 * pins (columns), this incidentally happen to be maximum 8 pins
+	 * and placed at GPIO0-7 so only the LSB of the pull up register
+	 * ever needs to be written.
+	 */
+	if (variant->set_pullup) {
+		u8 val;
+
+		ret = stmpe_reg_read(stmpe, pureg);
+		if (ret)
+			return ret;
+
+		/* Do not touch unused pins, may be used for GPIO */
+		val = ret & ~pu_pins;
+		val |= pu_pins;
+
+		ret = stmpe_reg_write(stmpe, pureg, val);
+	}
+
+	return 0;
 }
 
 static int stmpe_keypad_chip_init(struct stmpe_keypad *keypad)
 {
-	const struct stmpe_keypad_platform_data *plat = keypad->plat;
 	const struct stmpe_keypad_variant *variant = keypad->variant;
 	struct stmpe *stmpe = keypad->stmpe;
 	int ret;
 
-	if (plat->debounce_ms > STMPE_KEYPAD_MAX_DEBOUNCE)
+	if (keypad->debounce_ms > STMPE_KEYPAD_MAX_DEBOUNCE)
 		return -EINVAL;
 
-	if (plat->scan_count > STMPE_KEYPAD_MAX_SCAN_COUNT)
+	if (keypad->scan_count > STMPE_KEYPAD_MAX_SCAN_COUNT)
 		return -EINVAL;
 
 	ret = stmpe_enable(stmpe, STMPE_BLOCK_KEYPAD);
@@ -245,7 +291,7 @@ static int stmpe_keypad_chip_init(struct stmpe_keypad *keypad)
 
 	ret = stmpe_set_bits(stmpe, STMPE_KPC_CTRL_MSB,
 			     STMPE_KPC_CTRL_MSB_SCAN_COUNT,
-			     plat->scan_count << 4);
+			     keypad->scan_count << 4);
 	if (ret < 0)
 		return ret;
 
@@ -253,17 +299,18 @@ static int stmpe_keypad_chip_init(struct stmpe_keypad *keypad)
 			      STMPE_KPC_CTRL_LSB_SCAN |
 			      STMPE_KPC_CTRL_LSB_DEBOUNCE,
 			      STMPE_KPC_CTRL_LSB_SCAN |
-			      (plat->debounce_ms << 1));
+			      (keypad->debounce_ms << 1));
 }
 
-static void stmpe_keypad_fill_used_pins(struct stmpe_keypad *keypad)
+static void stmpe_keypad_fill_used_pins(struct stmpe_keypad *keypad,
+					u32 used_rows, u32 used_cols)
 {
 	int row, col;
 
-	for (row = 0; row < STMPE_KEYPAD_MAX_ROWS; row++) {
-		for (col = 0; col < STMPE_KEYPAD_MAX_COLS; col++) {
+	for (row = 0; row < used_rows; row++) {
+		for (col = 0; col < used_cols; col++) {
 			int code = MATRIX_SCAN_CODE(row, col,
-						STMPE_KEYPAD_ROW_SHIFT);
+						    STMPE_KEYPAD_ROW_SHIFT);
 			if (keypad->keymap[code] != KEY_RESERVED) {
 				keypad->rows |= 1 << row;
 				keypad->cols |= 1 << col;
@@ -272,51 +319,17 @@ static void stmpe_keypad_fill_used_pins(struct stmpe_keypad *keypad)
 	}
 }
 
-#ifdef CONFIG_OF
-static const struct stmpe_keypad_platform_data *
-stmpe_keypad_of_probe(struct device *dev)
-{
-	struct device_node *np = dev->of_node;
-	struct stmpe_keypad_platform_data *plat;
-
-	if (!np)
-		return ERR_PTR(-ENODEV);
-
-	plat = devm_kzalloc(dev, sizeof(*plat), GFP_KERNEL);
-	if (!plat)
-		return ERR_PTR(-ENOMEM);
-
-	of_property_read_u32(np, "debounce-interval", &plat->debounce_ms);
-	of_property_read_u32(np, "st,scan-count", &plat->scan_count);
-
-	plat->no_autorepeat = of_property_read_bool(np, "st,no-autorepeat");
-
-	return plat;
-}
-#else
-static inline const struct stmpe_keypad_platform_data *
-stmpe_keypad_of_probe(struct device *dev)
-{
-	return ERR_PTR(-EINVAL);
-}
-#endif
-
 static int stmpe_keypad_probe(struct platform_device *pdev)
 {
 	struct stmpe *stmpe = dev_get_drvdata(pdev->dev.parent);
-	const struct stmpe_keypad_platform_data *plat;
+	struct device_node *np = pdev->dev.of_node;
 	struct stmpe_keypad *keypad;
 	struct input_dev *input;
+	u32 rows;
+	u32 cols;
 	int error;
 	int irq;
 
-	plat = stmpe->pdata->keypad;
-	if (!plat) {
-		plat = stmpe_keypad_of_probe(&pdev->dev);
-		if (IS_ERR(plat))
-			return PTR_ERR(plat);
-	}
-
 	irq = platform_get_irq(pdev, 0);
 	if (irq < 0)
 		return irq;
@@ -326,6 +339,13 @@ static int stmpe_keypad_probe(struct platform_device *pdev)
 	if (!keypad)
 		return -ENOMEM;
 
+	keypad->stmpe = stmpe;
+	keypad->variant = &stmpe_keypad_variants[stmpe->partnum];
+
+	of_property_read_u32(np, "debounce-interval", &keypad->debounce_ms);
+	of_property_read_u32(np, "st,scan-count", &keypad->scan_count);
+	keypad->no_autorepeat = of_property_read_bool(np, "st,no-autorepeat");
+
 	input = devm_input_allocate_device(&pdev->dev);
 	if (!input)
 		return -ENOMEM;
@@ -334,23 +354,22 @@ static int stmpe_keypad_probe(struct platform_device *pdev)
 	input->id.bustype = BUS_I2C;
 	input->dev.parent = &pdev->dev;
 
-	error = matrix_keypad_build_keymap(plat->keymap_data, NULL,
-					   STMPE_KEYPAD_MAX_ROWS,
-					   STMPE_KEYPAD_MAX_COLS,
+	error = matrix_keypad_parse_of_params(&pdev->dev, &rows, &cols);
+	if (error)
+		return error;
+
+	error = matrix_keypad_build_keymap(NULL, NULL, rows, cols,
 					   keypad->keymap, input);
 	if (error)
 		return error;
 
 	input_set_capability(input, EV_MSC, MSC_SCAN);
-	if (!plat->no_autorepeat)
+	if (!keypad->no_autorepeat)
 		__set_bit(EV_REP, input->evbit);
 
-	stmpe_keypad_fill_used_pins(keypad);
+	stmpe_keypad_fill_used_pins(keypad, rows, cols);
 
-	keypad->stmpe = stmpe;
-	keypad->plat = plat;
 	keypad->input = input;
-	keypad->variant = &stmpe_keypad_variants[stmpe->partnum];
 
 	error = stmpe_keypad_chip_init(keypad);
 	if (error < 0)

drivers/input/mouse/alps.c

@@ -881,6 +881,34 @@ static void alps_get_finger_coordinate_v7(struct input_mt_pos *mt,
 					  unsigned char *pkt,
 					  unsigned char pkt_id)
 {
+	/*
+	 *       packet-fmt    b7   b6    b5   b4   b3   b2   b1   b0
+	 * Byte0 TWO & MULTI    L    1     R    M    1 Y0-2 Y0-1 Y0-0
+	 * Byte0 NEW            L    1  X1-5    1    1 Y0-2 Y0-1 Y0-0
+	 * Byte1            Y0-10 Y0-9  Y0-8 Y0-7 Y0-6 Y0-5 Y0-4 Y0-3
+	 * Byte2            X0-11    1 X0-10 X0-9 X0-8 X0-7 X0-6 X0-5
+	 * Byte3            X1-11    1  X0-4 X0-3    1 X0-2 X0-1 X0-0
+	 * Byte4 TWO        X1-10  TWO  X1-9 X1-8 X1-7 X1-6 X1-5 X1-4
+	 * Byte4 MULTI      X1-10  TWO  X1-9 X1-8 X1-7 X1-6 Y1-5    1
+	 * Byte4 NEW        X1-10  TWO  X1-9 X1-8 X1-7 X1-6    0    0
+	 * Byte5 TWO & NEW  Y1-10    0  Y1-9 Y1-8 Y1-7 Y1-6 Y1-5 Y1-4
+	 * Byte5 MULTI      Y1-10    0  Y1-9 Y1-8 Y1-7 Y1-6  F-1  F-0
+	 * L:         Left button
+	 * R / M:     Non-clickpads: Right / Middle button
+	 *            Clickpads: When > 2 fingers are down, and some fingers
+	 *            are in the button area, then the 2 coordinates reported
+	 *            are for fingers outside the button area and these report
+	 *            extra fingers being present in the right / left button
+	 *            area. Note these fingers are not added to the F field!
+	 *            so if a TWO packet is received and R = 1 then there are
+	 *            3 fingers down, etc.
+	 * TWO:       1: Two touches present, byte 0/4/5 are in TWO fmt
+	 *            0: If byte 4 bit 0 is 1, then byte 0/4/5 are in MULTI fmt
+	 *               otherwise byte 0 bit 4 must be set and byte 0/4/5 are
+	 *               in NEW fmt
+	 * F:         Number of fingers - 3, 0 means 3 fingers, 1 means 4 ...
+	 */
+
 	mt[0].x = ((pkt[2] & 0x80) << 4);
 	mt[0].x |= ((pkt[2] & 0x3F) << 5);
 	mt[0].x |= ((pkt[3] & 0x30) >> 1);
@@ -919,18 +947,21 @@ static void alps_get_finger_coordinate_v7(struct input_mt_pos *mt,
 
 static int alps_get_mt_count(struct input_mt_pos *mt)
 {
-	int i;
+	int i, fingers = 0;
 
-	for (i = 0; i < MAX_TOUCHES && mt[i].x != 0 && mt[i].y != 0; i++)
-		/* empty */;
+	for (i = 0; i < MAX_TOUCHES; i++) {
+		if (mt[i].x != 0 || mt[i].y != 0)
+			fingers++;
+	}
 
-	return i;
+	return fingers;
 }
 
 static int alps_decode_packet_v7(struct alps_fields *f,
 				  unsigned char *p,
 				  struct psmouse *psmouse)
 {
+	struct alps_data *priv = psmouse->private;
 	unsigned char pkt_id;
 
 	pkt_id = alps_get_packet_id_v7(p);
@@ -938,19 +969,52 @@ static int alps_decode_packet_v7(struct alps_fields *f,
 		return 0;
 	if (pkt_id == V7_PACKET_ID_UNKNOWN)
 		return -1;
+	/*
+	 * NEW packets are send to indicate a discontinuity in the finger
+	 * coordinate reporting. Specifically a finger may have moved from
+	 * slot 0 to 1 or vice versa. INPUT_MT_TRACK takes care of this for
+	 * us.
+	 *
+	 * NEW packets have 3 problems:
+	 * 1) They do not contain middle / right button info (on non clickpads)
+	 *    this can be worked around by preserving the old button state
+	 * 2) They do not contain an accurate fingercount, and they are
+	 *    typically send when the number of fingers changes. We cannot use
+	 *    the old finger count as that may mismatch with the amount of
+	 *    touch coordinates we've available in the NEW packet
+	 * 3) Their x data for the second touch is inaccurate leading to
+	 *    a possible jump of the x coordinate by 16 units when the first
+	 *    non NEW packet comes in
+	 * Since problems 2 & 3 cannot be worked around, just ignore them.
+	 */
+	if (pkt_id == V7_PACKET_ID_NEW)
+		return 1;
 
 	alps_get_finger_coordinate_v7(f->mt, p, pkt_id);
 
-	if (pkt_id == V7_PACKET_ID_TWO || pkt_id == V7_PACKET_ID_MULTI) {
-		f->left = (p[0] & 0x80) >> 7;
+	if (pkt_id == V7_PACKET_ID_TWO)
+		f->fingers = alps_get_mt_count(f->mt);
+	else /* pkt_id == V7_PACKET_ID_MULTI */
+		f->fingers = 3 + (p[5] & 0x03);
+
+	f->left = (p[0] & 0x80) >> 7;
+	if (priv->flags & ALPS_BUTTONPAD) {
+		if (p[0] & 0x20)
+			f->fingers++;
+		if (p[0] & 0x10)
+			f->fingers++;
+	} else {
 		f->right = (p[0] & 0x20) >> 5;
 		f->middle = (p[0] & 0x10) >> 4;
 	}
 
-	if (pkt_id == V7_PACKET_ID_TWO)
-		f->fingers = alps_get_mt_count(f->mt);
-	else if (pkt_id == V7_PACKET_ID_MULTI)
-		f->fingers = 3 + (p[5] & 0x03);
+	/* Sometimes a single touch is reported in mt[1] rather then mt[0] */
+	if (f->fingers == 1 && f->mt[0].x == 0 && f->mt[0].y == 0) {
+		f->mt[0].x = f->mt[1].x;
+		f->mt[0].y = f->mt[1].y;
+		f->mt[1].x = 0;
+		f->mt[1].y = 0;
+	}
 
 	return 0;
 }

drivers/input/mouse/trackpoint.c

@@ -227,6 +227,7 @@ TRACKPOINT_INT_ATTR(thresh, TP_THRESH, TP_DEF_THRESH);
 TRACKPOINT_INT_ATTR(upthresh, TP_UP_THRESH, TP_DEF_UP_THRESH);
 TRACKPOINT_INT_ATTR(ztime, TP_Z_TIME, TP_DEF_Z_TIME);
 TRACKPOINT_INT_ATTR(jenks, TP_JENKS_CURV, TP_DEF_JENKS_CURV);
+TRACKPOINT_INT_ATTR(drift_time, TP_DRIFT_TIME, TP_DEF_DRIFT_TIME);
 
 TRACKPOINT_BIT_ATTR(press_to_select, TP_TOGGLE_PTSON, TP_MASK_PTSON, 0,
 		    TP_DEF_PTSON);
@@ -246,6 +247,7 @@ static struct attribute *trackpoint_attrs[] = {
 	&psmouse_attr_upthresh.dattr.attr,
 	&psmouse_attr_ztime.dattr.attr,
 	&psmouse_attr_jenks.dattr.attr,
+	&psmouse_attr_drift_time.dattr.attr,
 	&psmouse_attr_press_to_select.dattr.attr,
 	&psmouse_attr_skipback.dattr.attr,
 	&psmouse_attr_ext_dev.dattr.attr,
@@ -312,6 +314,7 @@ static int trackpoint_sync(struct psmouse *psmouse, bool in_power_on_state)
 	TRACKPOINT_UPDATE(in_power_on_state, psmouse, tp, upthresh);
 	TRACKPOINT_UPDATE(in_power_on_state, psmouse, tp, ztime);
 	TRACKPOINT_UPDATE(in_power_on_state, psmouse, tp, jenks);
+	TRACKPOINT_UPDATE(in_power_on_state, psmouse, tp, drift_time);
 
 	/* toggles */
 	TRACKPOINT_UPDATE(in_power_on_state, psmouse, tp, press_to_select);
@@ -332,6 +335,7 @@ static void trackpoint_defaults(struct trackpoint_data *tp)
 	TRACKPOINT_SET_POWER_ON_DEFAULT(tp, upthresh);
 	TRACKPOINT_SET_POWER_ON_DEFAULT(tp, ztime);
 	TRACKPOINT_SET_POWER_ON_DEFAULT(tp, jenks);
+	TRACKPOINT_SET_POWER_ON_DEFAULT(tp, drift_time);
 	TRACKPOINT_SET_POWER_ON_DEFAULT(tp, inertia);
 
 	/* toggles */

drivers/input/mouse/trackpoint.h

@@ -70,6 +70,9 @@
 #define TP_UP_THRESH		0x5A	/* Used to generate a 'click' on Z-axis */
 #define TP_Z_TIME		0x5E	/* How sharp of a press */
 #define TP_JENKS_CURV		0x5D	/* Minimum curvature for double click */
+#define TP_DRIFT_TIME		0x5F	/* How long a 'hands off' condition */
+					/* must last (x*107ms) for drift */
+					/* correction to occur */
 
 /*
  * Toggling Flag bits
@@ -120,6 +123,7 @@
 #define TP_DEF_UP_THRESH	0xFF
 #define TP_DEF_Z_TIME		0x26
 #define TP_DEF_JENKS_CURV	0x87
+#define TP_DEF_DRIFT_TIME	0x05
 
 /* Toggles */
 #define TP_DEF_MB		0x00
@@ -137,6 +141,7 @@ struct trackpoint_data
 	unsigned char draghys, mindrag;
 	unsigned char thresh, upthresh;
 	unsigned char ztime, jenks;
+	unsigned char drift_time;
 
 	/* toggles */
 	unsigned char press_to_select;

drivers/input/touchscreen/atmel_mxt_ts.c

@@ -99,13 +99,9 @@
 #define MXT_T6_STATUS_COMSERR	(1 << 2)
 
 /* MXT_GEN_POWER_T7 field */
-struct t7_config {
-	u8 idle;
-	u8 active;
-} __packed;
-
-#define MXT_POWER_CFG_RUN		0
-#define MXT_POWER_CFG_DEEPSLEEP		1
+#define MXT_POWER_IDLEACQINT	0
+#define MXT_POWER_ACTVACQINT	1
+#define MXT_POWER_ACTV2IDLETO	2
 
 /* MXT_GEN_ACQUIRE_T8 field */
 #define MXT_ACQUIRE_CHRGTIME	0
@@ -117,6 +113,7 @@ struct t7_config {
 #define MXT_ACQUIRE_ATCHCALSTHR	7
 
 /* MXT_TOUCH_MULTI_T9 field */
+#define MXT_TOUCH_CTRL		0
 #define MXT_T9_ORIENT		9
 #define MXT_T9_RANGE		18
 
@@ -256,7 +253,6 @@ struct mxt_data {
 	bool update_input;
 	u8 last_message_count;
 	u8 num_touchids;
-	struct t7_config t7_cfg;
 
 	/* Cached parameters from object table */
 	u16 T5_address;
@@ -672,6 +668,20 @@ static void mxt_proc_t6_messages(struct mxt_data *data, u8 *msg)
 	data->t6_status = status;
 }
 
+static int mxt_write_object(struct mxt_data *data,
+				 u8 type, u8 offset, u8 val)
+{
+	struct mxt_object *object;
+	u16 reg;
+
+	object = mxt_get_object(data, type);
+	if (!object || offset >= mxt_obj_size(object))
+		return -EINVAL;
+
+	reg = object->start_address;
+	return mxt_write_reg(data->client, reg + offset, val);
+}
+
 static void mxt_input_button(struct mxt_data *data, u8 *message)
 {
 	struct input_dev *input = data->input_dev;
@@ -1742,60 +1752,6 @@ err_free_object_table:
 	return error;
 }
 
-static int mxt_set_t7_power_cfg(struct mxt_data *data, u8 sleep)
-{
-	struct device *dev = &data->client->dev;
-	int error;
-	struct t7_config *new_config;
-	struct t7_config deepsleep = { .active = 0, .idle = 0 };
-
-	if (sleep == MXT_POWER_CFG_DEEPSLEEP)
-		new_config = &deepsleep;
-	else
-		new_config = &data->t7_cfg;
-
-	error = __mxt_write_reg(data->client, data->T7_address,
-				sizeof(data->t7_cfg), new_config);
-	if (error)
-		return error;
-
-	dev_dbg(dev, "Set T7 ACTV:%d IDLE:%d\n",
-		new_config->active, new_config->idle);
-
-	return 0;
-}
-
-static int mxt_init_t7_power_cfg(struct mxt_data *data)
-{
-	struct device *dev = &data->client->dev;
-	int error;
-	bool retry = false;
-
-recheck:
-	error = __mxt_read_reg(data->client, data->T7_address,
-				sizeof(data->t7_cfg), &data->t7_cfg);
-	if (error)
-		return error;
-
-	if (data->t7_cfg.active == 0 || data->t7_cfg.idle == 0) {
-		if (!retry) {
-			dev_dbg(dev, "T7 cfg zero, resetting\n");
-			mxt_soft_reset(data);
-			retry = true;
-			goto recheck;
-		} else {
-			dev_dbg(dev, "T7 cfg zero after reset, overriding\n");
-			data->t7_cfg.active = 20;
-			data->t7_cfg.idle = 100;
-			return mxt_set_t7_power_cfg(data, MXT_POWER_CFG_RUN);
-		}
-	}
-
-	dev_dbg(dev, "Initialized power cfg: ACTV %d, IDLE %d\n",
-		data->t7_cfg.active, data->t7_cfg.idle);
-	return 0;
-}
-
 static int mxt_configure_objects(struct mxt_data *data,
 				 const struct firmware *cfg)
 {
@@ -1809,12 +1765,6 @@ static int mxt_configure_objects(struct mxt_data *data,
 			dev_warn(dev, "Error %d updating config\n", error);
 	}
 
-	error = mxt_init_t7_power_cfg(data);
-	if (error) {
-		dev_err(dev, "Failed to initialize power cfg\n");
-		return error;
-	}
-
 	error = mxt_initialize_t9_input_device(data);
 	if (error)
 		return error;
@@ -2093,15 +2043,16 @@ static const struct attribute_group mxt_attr_group = {
 
 static void mxt_start(struct mxt_data *data)
 {
-	mxt_set_t7_power_cfg(data, MXT_POWER_CFG_RUN);
-
-	/* Recalibrate since chip has been in deep sleep */
-	mxt_t6_command(data, MXT_COMMAND_CALIBRATE, 1, false);
+	/* Touch enable */
+	mxt_write_object(data,
+			MXT_TOUCH_MULTI_T9, MXT_TOUCH_CTRL, 0x83);
 }
 
 static void mxt_stop(struct mxt_data *data)
 {
-	mxt_set_t7_power_cfg(data, MXT_POWER_CFG_DEEPSLEEP);
+	/* Touch disable */
+	mxt_write_object(data,
+			MXT_TOUCH_MULTI_T9, MXT_TOUCH_CTRL, 0);
 }
 
 static int mxt_input_open(struct input_dev *dev)
@@ -2266,6 +2217,8 @@ static int __maybe_unused mxt_resume(struct device *dev)
 	struct mxt_data *data = i2c_get_clientdata(client);
 	struct input_dev *input_dev = data->input_dev;
 
+	mxt_soft_reset(data);
+
 	mutex_lock(&input_dev->mutex);
 
 	if (input_dev->users)

drivers/input/touchscreen/edt-ft5x06.c

@@ -850,9 +850,11 @@ static int edt_ft5x06_ts_identify(struct i2c_client *client,
 }
 
 #define EDT_ATTR_CHECKSET(name, reg) \
+do {								\
 	if (pdata->name >= edt_ft5x06_attr_##name.limit_low &&		\
 	    pdata->name <= edt_ft5x06_attr_##name.limit_high)		\
-		edt_ft5x06_register_write(tsdata, reg, pdata->name)
+		edt_ft5x06_register_write(tsdata, reg, pdata->name);	\
+} while (0)
 
 #define EDT_GET_PROP(name, reg) {				\
 	u32 val;						\

drivers/mfd/stmpe.c

@@ -519,6 +519,7 @@ static const u8 stmpe1601_regs[] = {
 	[STMPE_IDX_GPDR_LSB]	= STMPE1601_REG_GPIO_SET_DIR_LSB,
 	[STMPE_IDX_GPRER_LSB]	= STMPE1601_REG_GPIO_RE_LSB,
 	[STMPE_IDX_GPFER_LSB]	= STMPE1601_REG_GPIO_FE_LSB,
+	[STMPE_IDX_GPPUR_LSB]	= STMPE1601_REG_GPIO_PU_LSB,
 	[STMPE_IDX_GPAFR_U_MSB]	= STMPE1601_REG_GPIO_AF_U_MSB,
 	[STMPE_IDX_IEGPIOR_LSB]	= STMPE1601_REG_INT_EN_GPIO_MASK_LSB,
 	[STMPE_IDX_ISGPIOR_MSB]	= STMPE1601_REG_INT_STA_GPIO_MSB,
@@ -667,6 +668,7 @@ static const u8 stmpe1801_regs[] = {
 	[STMPE_IDX_GPDR_LSB]	= STMPE1801_REG_GPIO_SET_DIR_LOW,
 	[STMPE_IDX_GPRER_LSB]	= STMPE1801_REG_GPIO_RE_LOW,
 	[STMPE_IDX_GPFER_LSB]	= STMPE1801_REG_GPIO_FE_LOW,
+	[STMPE_IDX_GPPUR_LSB]	= STMPE1801_REG_GPIO_PULL_UP_LOW,
 	[STMPE_IDX_IEGPIOR_LSB]	= STMPE1801_REG_INT_EN_GPIO_MASK_LOW,
 	[STMPE_IDX_ISGPIOR_LSB]	= STMPE1801_REG_INT_STA_GPIO_LOW,
 };
@@ -750,6 +752,8 @@ static const u8 stmpe24xx_regs[] = {
 	[STMPE_IDX_GPDR_LSB]	= STMPE24XX_REG_GPDR_LSB,
 	[STMPE_IDX_GPRER_LSB]	= STMPE24XX_REG_GPRER_LSB,
 	[STMPE_IDX_GPFER_LSB]	= STMPE24XX_REG_GPFER_LSB,
+	[STMPE_IDX_GPPUR_LSB]	= STMPE24XX_REG_GPPUR_LSB,
+	[STMPE_IDX_GPPDR_LSB]	= STMPE24XX_REG_GPPDR_LSB,
 	[STMPE_IDX_GPAFR_U_MSB]	= STMPE24XX_REG_GPAFR_U_MSB,
 	[STMPE_IDX_IEGPIOR_LSB]	= STMPE24XX_REG_IEGPIOR_LSB,
 	[STMPE_IDX_ISGPIOR_MSB]	= STMPE24XX_REG_ISGPIOR_MSB,

drivers/mfd/stmpe.h

@@ -188,6 +188,7 @@ int stmpe_remove(struct stmpe *stmpe);
 #define STMPE1601_REG_GPIO_ED_MSB		0x8A
 #define STMPE1601_REG_GPIO_RE_LSB		0x8D
 #define STMPE1601_REG_GPIO_FE_LSB		0x8F
+#define STMPE1601_REG_GPIO_PU_LSB		0x91
 #define STMPE1601_REG_GPIO_AF_U_MSB		0x92
 
 #define STMPE1601_SYS_CTRL_ENABLE_GPIO		(1 << 3)
@@ -276,6 +277,8 @@ int stmpe_remove(struct stmpe *stmpe);
 #define STMPE24XX_REG_GPEDR_MSB		0x8C
 #define STMPE24XX_REG_GPRER_LSB		0x91
 #define STMPE24XX_REG_GPFER_LSB		0x94
+#define STMPE24XX_REG_GPPUR_LSB		0x97
+#define STMPE24XX_REG_GPPDR_LSB		0x9a
 #define STMPE24XX_REG_GPAFR_U_MSB	0x9B
 
 #define STMPE24XX_SYS_CTRL_ENABLE_GPIO		(1 << 3)

drivers/mmc/core/mmc.c

@@ -886,7 +886,7 @@ static int mmc_select_bus_width(struct mmc_card *card)
 	unsigned idx, bus_width = 0;
 	int err = 0;
 
-	if (!mmc_can_ext_csd(card) &&
+	if (!mmc_can_ext_csd(card) ||
 	    !(host->caps & (MMC_CAP_4_BIT_DATA | MMC_CAP_8_BIT_DATA)))
 		return 0;
 

drivers/net/bonding/bond_main.c

@@ -1648,7 +1648,7 @@ static int __bond_release_one(struct net_device *bond_dev,
 	/* slave is not a slave or master is not master of this slave */
 	if (!(slave_dev->flags & IFF_SLAVE) ||
 	    !netdev_has_upper_dev(slave_dev, bond_dev)) {
-		netdev_err(bond_dev, "cannot release %s\n",
+		netdev_dbg(bond_dev, "cannot release %s\n",
 			   slave_dev->name);
 		return -EINVAL;
 	}

drivers/net/caif/caif_virtio.c

@@ -257,7 +257,6 @@ static int cfv_rx_poll(struct napi_struct *napi, int quota)
 	struct vringh_kiov *riov = &cfv->ctx.riov;
 	unsigned int skb_len;
 
-again:
 	do {
 		skb = NULL;
 
@@ -322,7 +321,6 @@ exit:
 		    napi_schedule_prep(napi)) {
 			vringh_notify_disable_kern(cfv->vr_rx);
 			__napi_schedule(napi);
-			goto again;
 		}
 		break;
 

drivers/net/ethernet/8390/ne2k-pci.c

@@ -246,13 +246,13 @@ static int ne2k_pci_init_one(struct pci_dev *pdev,
 
 	if (!ioaddr || ((pci_resource_flags (pdev, 0) & IORESOURCE_IO) == 0)) {
 		dev_err(&pdev->dev, "no I/O resource at PCI BAR #0\n");
-		return -ENODEV;
+		goto err_out;
 	}
 
 	if (request_region (ioaddr, NE_IO_EXTENT, DRV_NAME) == NULL) {
 		dev_err(&pdev->dev, "I/O resource 0x%x @ 0x%lx busy\n",
 			NE_IO_EXTENT, ioaddr);
-		return -EBUSY;
+		goto err_out;
 	}
 
 	reg0 = inb(ioaddr);
@@ -392,6 +392,8 @@ err_out_free_netdev:
 	free_netdev (dev);
 err_out_free_res:
 	release_region (ioaddr, NE_IO_EXTENT);
+err_out:
+	pci_disable_device(pdev);
 	return -ENODEV;
 }
 

drivers/net/ethernet/Kconfig

@@ -156,18 +156,6 @@ source "drivers/net/ethernet/realtek/Kconfig"
 source "drivers/net/ethernet/renesas/Kconfig"
 source "drivers/net/ethernet/rdc/Kconfig"
 source "drivers/net/ethernet/rocker/Kconfig"
-
-config S6GMAC
-	tristate "S6105 GMAC ethernet support"
-	depends on XTENSA_VARIANT_S6000
-	select PHYLIB
-	---help---
-	  This driver supports the on chip ethernet device on the
-	  S6105 xtensa processor.
-
-	  To compile this driver as a module, choose M here. The module
-	  will be called s6gmac.
-
 source "drivers/net/ethernet/samsung/Kconfig"
 source "drivers/net/ethernet/seeq/Kconfig"
 source "drivers/net/ethernet/silan/Kconfig"

drivers/net/ethernet/Makefile

@@ -66,7 +66,6 @@ obj-$(CONFIG_NET_VENDOR_REALTEK) += realtek/
 obj-$(CONFIG_SH_ETH) += renesas/
 obj-$(CONFIG_NET_VENDOR_RDC) += rdc/
 obj-$(CONFIG_NET_VENDOR_ROCKER) += rocker/
-obj-$(CONFIG_S6GMAC) += s6gmac.o
 obj-$(CONFIG_NET_VENDOR_SAMSUNG) += samsung/
 obj-$(CONFIG_NET_VENDOR_SEEQ) += seeq/
 obj-$(CONFIG_NET_VENDOR_SILAN) += silan/

drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c

@@ -12553,9 +12553,11 @@ static int bnx2x_get_phys_port_id(struct net_device *netdev,
 	return 0;
 }
 
-static bool bnx2x_gso_check(struct sk_buff *skb, struct net_device *dev)
+static netdev_features_t bnx2x_features_check(struct sk_buff *skb,
+					      struct net_device *dev,
+					      netdev_features_t features)
 {
-	return vxlan_gso_check(skb);
+	return vxlan_features_check(skb, features);
 }
 
 static const struct net_device_ops bnx2x_netdev_ops = {
@@ -12589,7 +12591,7 @@ static const struct net_device_ops bnx2x_netdev_ops = {
 #endif
 	.ndo_get_phys_port_id	= bnx2x_get_phys_port_id,
 	.ndo_set_vf_link_state	= bnx2x_set_vf_link_state,
-	.ndo_gso_check		= bnx2x_gso_check,
+	.ndo_features_check	= bnx2x_features_check,
 };
 
 static int bnx2x_set_coherency_mask(struct bnx2x *bp)

drivers/net/ethernet/broadcom/tg3.c

@@ -17800,23 +17800,6 @@ static int tg3_init_one(struct pci_dev *pdev,
 		goto err_out_apeunmap;
 	}
 
-	/*
-	 * Reset chip in case UNDI or EFI driver did not shutdown
-	 * DMA self test will enable WDMAC and we'll see (spurious)
-	 * pending DMA on the PCI bus at that point.
-	 */
-	if ((tr32(HOSTCC_MODE) & HOSTCC_MODE_ENABLE) ||
-	    (tr32(WDMAC_MODE) & WDMAC_MODE_ENABLE)) {
-		tw32(MEMARB_MODE, MEMARB_MODE_ENABLE);
-		tg3_halt(tp, RESET_KIND_SHUTDOWN, 1);
-	}
-
-	err = tg3_test_dma(tp);
-	if (err) {
-		dev_err(&pdev->dev, "DMA engine test failed, aborting\n");
-		goto err_out_apeunmap;
-	}
-
 	intmbx = MAILBOX_INTERRUPT_0 + TG3_64BIT_REG_LOW;
 	rcvmbx = MAILBOX_RCVRET_CON_IDX_0 + TG3_64BIT_REG_LOW;
 	sndmbx = MAILBOX_SNDHOST_PROD_IDX_0 + TG3_64BIT_REG_LOW;
@@ -17861,6 +17844,23 @@ static int tg3_init_one(struct pci_dev *pdev,
 			sndmbx += 0xc;
 	}
 
+	/*
+	 * Reset chip in case UNDI or EFI driver did not shutdown
+	 * DMA self test will enable WDMAC and we'll see (spurious)
+	 * pending DMA on the PCI bus at that point.
+	 */
+	if ((tr32(HOSTCC_MODE) & HOSTCC_MODE_ENABLE) ||
+	    (tr32(WDMAC_MODE) & WDMAC_MODE_ENABLE)) {
+		tw32(MEMARB_MODE, MEMARB_MODE_ENABLE);
+		tg3_halt(tp, RESET_KIND_SHUTDOWN, 1);
+	}
+
+	err = tg3_test_dma(tp);
+	if (err) {
+		dev_err(&pdev->dev, "DMA engine test failed, aborting\n");
+		goto err_out_apeunmap;
+	}
+
 	tg3_init_coal(tp);
 
 	pci_set_drvdata(pdev, dev);

drivers/net/ethernet/brocade/bna/bnad_debugfs.c

@@ -172,7 +172,7 @@ bnad_get_debug_drvinfo(struct bnad *bnad, void *buffer, u32 len)
 
 	/* Retrieve flash partition info */
 	fcomp.comp_status = 0;
-	init_completion(&fcomp.comp);
+	reinit_completion(&fcomp.comp);
 	spin_lock_irqsave(&bnad->bna_lock, flags);
 	ret = bfa_nw_flash_get_attr(&bnad->bna.flash, &drvinfo->flash_attr,
 				bnad_cb_completion, &fcomp);

drivers/net/ethernet/chelsio/cxgb4vf/adapter.h

@@ -96,6 +96,9 @@ struct port_info {
 	s16 xact_addr_filt;		/* index of our MAC address filter */
 	u16 rss_size;			/* size of VI's RSS table slice */
 	u8 pidx;			/* index into adapter port[] */
+	s8 mdio_addr;
+	u8 port_type;			/* firmware port type */
+	u8 mod_type;			/* firmware module type */
 	u8 port_id;			/* physical port ID */
 	u8 nqsets;			/* # of "Queue Sets" */
 	u8 first_qset;			/* index of first "Queue Set" */
@@ -522,6 +525,7 @@ static inline struct adapter *netdev2adap(const struct net_device *dev)
  * is "contracted" to provide for the common code.
  */
 void t4vf_os_link_changed(struct adapter *, int, int);
+void t4vf_os_portmod_changed(struct adapter *, int);
 
 /*
  * SGE function prototype declarations.

drivers/net/ethernet/chelsio/cxgb4vf/cxgb4vf_main.c

@@ -44,6 +44,7 @@
 #include <linux/etherdevice.h>
 #include <linux/debugfs.h>
 #include <linux/ethtool.h>
+#include <linux/mdio.h>
 
 #include "t4vf_common.h"
 #include "t4vf_defs.h"
@@ -209,6 +210,38 @@ void t4vf_os_link_changed(struct adapter *adapter, int pidx, int link_ok)
 	}
 }
 
+/*
+ * THe port module type has changed on the indicated "port" (Virtual
+ * Interface).
+ */
+void t4vf_os_portmod_changed(struct adapter *adapter, int pidx)
+{
+	static const char * const mod_str[] = {
+		NULL, "LR", "SR", "ER", "passive DA", "active DA", "LRM"
+	};
+	const struct net_device *dev = adapter->port[pidx];
+	const struct port_info *pi = netdev_priv(dev);
+
+	if (pi->mod_type == FW_PORT_MOD_TYPE_NONE)
+		dev_info(adapter->pdev_dev, "%s: port module unplugged\n",
+			 dev->name);
+	else if (pi->mod_type < ARRAY_SIZE(mod_str))
+		dev_info(adapter->pdev_dev, "%s: %s port module inserted\n",
+			 dev->name, mod_str[pi->mod_type]);
+	else if (pi->mod_type == FW_PORT_MOD_TYPE_NOTSUPPORTED)
+		dev_info(adapter->pdev_dev, "%s: unsupported optical port "
+			 "module inserted\n", dev->name);
+	else if (pi->mod_type == FW_PORT_MOD_TYPE_UNKNOWN)
+		dev_info(adapter->pdev_dev, "%s: unknown port module inserted,"
+			 "forcing TWINAX\n", dev->name);
+	else if (pi->mod_type == FW_PORT_MOD_TYPE_ERROR)
+		dev_info(adapter->pdev_dev, "%s: transceiver module error\n",
+			 dev->name);
+	else
+		dev_info(adapter->pdev_dev, "%s: unknown module type %d "
+			 "inserted\n", dev->name, pi->mod_type);
+}
+
 /*
  * Net device operations.
  * ======================
@@ -1193,24 +1226,103 @@ static void cxgb4vf_poll_controller(struct net_device *dev)
  * state of the port to which we're linked.
  */
 
-/*
- * Return current port link settings.
- */
-static int cxgb4vf_get_settings(struct net_device *dev,
-				struct ethtool_cmd *cmd)
-{
-	const struct port_info *pi = netdev_priv(dev);
+static unsigned int t4vf_from_fw_linkcaps(enum fw_port_type type,
+					  unsigned int caps)
+{
+	unsigned int v = 0;
+
+	if (type == FW_PORT_TYPE_BT_SGMII || type == FW_PORT_TYPE_BT_XFI ||
+	    type == FW_PORT_TYPE_BT_XAUI) {
+		v |= SUPPORTED_TP;
+		if (caps & FW_PORT_CAP_SPEED_100M)
+			v |= SUPPORTED_100baseT_Full;
+		if (caps & FW_PORT_CAP_SPEED_1G)
+			v |= SUPPORTED_1000baseT_Full;
+		if (caps & FW_PORT_CAP_SPEED_10G)
+			v |= SUPPORTED_10000baseT_Full;
+	} else if (type == FW_PORT_TYPE_KX4 || type == FW_PORT_TYPE_KX) {
+		v |= SUPPORTED_Backplane;
+		if (caps & FW_PORT_CAP_SPEED_1G)
+			v |= SUPPORTED_1000baseKX_Full;
+		if (caps & FW_PORT_CAP_SPEED_10G)
+			v |= SUPPORTED_10000baseKX4_Full;
+	} else if (type == FW_PORT_TYPE_KR)
+		v |= SUPPORTED_Backplane | SUPPORTED_10000baseKR_Full;
+	else if (type == FW_PORT_TYPE_BP_AP)
+		v |= SUPPORTED_Backplane | SUPPORTED_10000baseR_FEC |
+		     SUPPORTED_10000baseKR_Full | SUPPORTED_1000baseKX_Full;
+	else if (type == FW_PORT_TYPE_BP4_AP)
+		v |= SUPPORTED_Backplane | SUPPORTED_10000baseR_FEC |
+		     SUPPORTED_10000baseKR_Full | SUPPORTED_1000baseKX_Full |
+		     SUPPORTED_10000baseKX4_Full;
+	else if (type == FW_PORT_TYPE_FIBER_XFI ||
+		 type == FW_PORT_TYPE_FIBER_XAUI ||
+		 type == FW_PORT_TYPE_SFP ||
+		 type == FW_PORT_TYPE_QSFP_10G ||
+		 type == FW_PORT_TYPE_QSA) {
+		v |= SUPPORTED_FIBRE;
+		if (caps & FW_PORT_CAP_SPEED_1G)
+			v |= SUPPORTED_1000baseT_Full;
+		if (caps & FW_PORT_CAP_SPEED_10G)
+			v |= SUPPORTED_10000baseT_Full;
+	} else if (type == FW_PORT_TYPE_BP40_BA ||
+		   type == FW_PORT_TYPE_QSFP) {
+		v |= SUPPORTED_40000baseSR4_Full;
+		v |= SUPPORTED_FIBRE;
+	}
+
+	if (caps & FW_PORT_CAP_ANEG)
+		v |= SUPPORTED_Autoneg;
+	return v;
+}
+
+static int cxgb4vf_get_settings(struct net_device *dev, struct ethtool_cmd *cmd)
+{
+	const struct port_info *p = netdev_priv(dev);
+
+	if (p->port_type == FW_PORT_TYPE_BT_SGMII ||
+	    p->port_type == FW_PORT_TYPE_BT_XFI ||
+	    p->port_type == FW_PORT_TYPE_BT_XAUI)
+		cmd->port = PORT_TP;
+	else if (p->port_type == FW_PORT_TYPE_FIBER_XFI ||
+		 p->port_type == FW_PORT_TYPE_FIBER_XAUI)
+		cmd->port = PORT_FIBRE;
+	else if (p->port_type == FW_PORT_TYPE_SFP ||
+		 p->port_type == FW_PORT_TYPE_QSFP_10G ||
+		 p->port_type == FW_PORT_TYPE_QSA ||
+		 p->port_type == FW_PORT_TYPE_QSFP) {
+		if (p->mod_type == FW_PORT_MOD_TYPE_LR ||
+		    p->mod_type == FW_PORT_MOD_TYPE_SR ||
+		    p->mod_type == FW_PORT_MOD_TYPE_ER ||
+		    p->mod_type == FW_PORT_MOD_TYPE_LRM)
+			cmd->port = PORT_FIBRE;
+		else if (p->mod_type == FW_PORT_MOD_TYPE_TWINAX_PASSIVE ||
+			 p->mod_type == FW_PORT_MOD_TYPE_TWINAX_ACTIVE)
+			cmd->port = PORT_DA;
+		else
+			cmd->port = PORT_OTHER;
+	} else
+		cmd->port = PORT_OTHER;
 
-	cmd->supported = pi->link_cfg.supported;
-	cmd->advertising = pi->link_cfg.advertising;
+	if (p->mdio_addr >= 0) {
+		cmd->phy_address = p->mdio_addr;
+		cmd->transceiver = XCVR_EXTERNAL;
+		cmd->mdio_support = p->port_type == FW_PORT_TYPE_BT_SGMII ?
+			MDIO_SUPPORTS_C22 : MDIO_SUPPORTS_C45;
+	} else {
+		cmd->phy_address = 0;  /* not really, but no better option */
+		cmd->transceiver = XCVR_INTERNAL;
+		cmd->mdio_support = 0;
+	}
+
+	cmd->supported = t4vf_from_fw_linkcaps(p->port_type,
+					       p->link_cfg.supported);
+	cmd->advertising = t4vf_from_fw_linkcaps(p->port_type,
+					    p->link_cfg.advertising);
 	ethtool_cmd_speed_set(cmd,
-			      netif_carrier_ok(dev) ? pi->link_cfg.speed : -1);
+			      netif_carrier_ok(dev) ? p->link_cfg.speed : 0);
 	cmd->duplex = DUPLEX_FULL;
-
-	cmd->port = (cmd->supported & SUPPORTED_TP) ? PORT_TP : PORT_FIBRE;
-	cmd->phy_address = pi->port_id;
-	cmd->transceiver = XCVR_EXTERNAL;
-	cmd->autoneg = pi->link_cfg.autoneg;
+	cmd->autoneg = p->link_cfg.autoneg;
 	cmd->maxtxpkt = 0;
 	cmd->maxrxpkt = 0;
 	return 0;

drivers/net/ethernet/chelsio/cxgb4vf/t4vf_common.h

@@ -230,7 +230,7 @@ struct adapter_params {
 
 static inline bool is_10g_port(const struct link_config *lc)
 {
-	return (lc->supported & SUPPORTED_10000baseT_Full) != 0;
+	return (lc->supported & FW_PORT_CAP_SPEED_10G) != 0;
 }
 
 static inline bool is_x_10g_port(const struct link_config *lc)

drivers/net/ethernet/chelsio/cxgb4vf/t4vf_hw.c

@@ -245,6 +245,10 @@ static int hash_mac_addr(const u8 *addr)
 	return a & 0x3f;
 }
 
+#define ADVERT_MASK (FW_PORT_CAP_SPEED_100M | FW_PORT_CAP_SPEED_1G |\
+		     FW_PORT_CAP_SPEED_10G | FW_PORT_CAP_SPEED_40G | \
+		     FW_PORT_CAP_SPEED_100G | FW_PORT_CAP_ANEG)
+
 /**
  *	init_link_config - initialize a link's SW state
  *	@lc: structure holding the link state
@@ -259,8 +263,8 @@ static void init_link_config(struct link_config *lc, unsigned int caps)
 	lc->requested_speed = 0;
 	lc->speed = 0;
 	lc->requested_fc = lc->fc = PAUSE_RX | PAUSE_TX;
-	if (lc->supported & SUPPORTED_Autoneg) {
-		lc->advertising = lc->supported;
+	if (lc->supported & FW_PORT_CAP_ANEG) {
+		lc->advertising = lc->supported & ADVERT_MASK;
 		lc->autoneg = AUTONEG_ENABLE;
 		lc->requested_fc |= PAUSE_AUTONEG;
 	} else {
@@ -280,7 +284,6 @@ int t4vf_port_init(struct adapter *adapter, int pidx)
 	struct fw_vi_cmd vi_cmd, vi_rpl;
 	struct fw_port_cmd port_cmd, port_rpl;
 	int v;
-	u32 word;
 
 	/*
 	 * Execute a VI Read command to get our Virtual Interface information
@@ -319,19 +322,11 @@ int t4vf_port_init(struct adapter *adapter, int pidx)
 	if (v)
 		return v;
 
-	v = 0;
-	word = be16_to_cpu(port_rpl.u.info.pcap);
-	if (word & FW_PORT_CAP_SPEED_100M)
-		v |= SUPPORTED_100baseT_Full;
-	if (word & FW_PORT_CAP_SPEED_1G)
-		v |= SUPPORTED_1000baseT_Full;
-	if (word & FW_PORT_CAP_SPEED_10G)
-		v |= SUPPORTED_10000baseT_Full;
-	if (word & FW_PORT_CAP_SPEED_40G)
-		v |= SUPPORTED_40000baseSR4_Full;
-	if (word & FW_PORT_CAP_ANEG)
-		v |= SUPPORTED_Autoneg;
-	init_link_config(&pi->link_cfg, v);
+	v = be32_to_cpu(port_rpl.u.info.lstatus_to_modtype);
+	pi->port_type = FW_PORT_CMD_PTYPE_G(v);
+	pi->mod_type = FW_PORT_MOD_TYPE_NA;
+
+	init_link_config(&pi->link_cfg, be16_to_cpu(port_rpl.u.info.pcap));
 
 	return 0;
 }
@@ -1491,7 +1486,7 @@ int t4vf_handle_fw_rpl(struct adapter *adapter, const __be64 *rpl)
 		 */
 		const struct fw_port_cmd *port_cmd =
 			(const struct fw_port_cmd *)rpl;
-		u32 word;
+		u32 stat, mod;
 		int action, port_id, link_ok, speed, fc, pidx;
 
 		/*
@@ -1509,21 +1504,21 @@ int t4vf_handle_fw_rpl(struct adapter *adapter, const __be64 *rpl)
 		port_id = FW_PORT_CMD_PORTID_G(
 			be32_to_cpu(port_cmd->op_to_portid));
 
-		word = be32_to_cpu(port_cmd->u.info.lstatus_to_modtype);
-		link_ok = (word & FW_PORT_CMD_LSTATUS_F) != 0;
+		stat = be32_to_cpu(port_cmd->u.info.lstatus_to_modtype);
+		link_ok = (stat & FW_PORT_CMD_LSTATUS_F) != 0;
 		speed = 0;
 		fc = 0;
-		if (word & FW_PORT_CMD_RXPAUSE_F)
+		if (stat & FW_PORT_CMD_RXPAUSE_F)
 			fc |= PAUSE_RX;
-		if (word & FW_PORT_CMD_TXPAUSE_F)
+		if (stat & FW_PORT_CMD_TXPAUSE_F)
 			fc |= PAUSE_TX;
-		if (word & FW_PORT_CMD_LSPEED_V(FW_PORT_CAP_SPEED_100M))
+		if (stat & FW_PORT_CMD_LSPEED_V(FW_PORT_CAP_SPEED_100M))
 			speed = 100;
-		else if (word & FW_PORT_CMD_LSPEED_V(FW_PORT_CAP_SPEED_1G))
+		else if (stat & FW_PORT_CMD_LSPEED_V(FW_PORT_CAP_SPEED_1G))
 			speed = 1000;
-		else if (word & FW_PORT_CMD_LSPEED_V(FW_PORT_CAP_SPEED_10G))
+		else if (stat & FW_PORT_CMD_LSPEED_V(FW_PORT_CAP_SPEED_10G))
 			speed = 10000;
-		else if (word & FW_PORT_CMD_LSPEED_V(FW_PORT_CAP_SPEED_40G))
+		else if (stat & FW_PORT_CMD_LSPEED_V(FW_PORT_CAP_SPEED_40G))
 			speed = 40000;
 
 		/*
@@ -1540,12 +1535,21 @@ int t4vf_handle_fw_rpl(struct adapter *adapter, const __be64 *rpl)
 				continue;
 
 			lc = &pi->link_cfg;
+
+			mod = FW_PORT_CMD_MODTYPE_G(stat);
+			if (mod != pi->mod_type) {
+				pi->mod_type = mod;
+				t4vf_os_portmod_changed(adapter, pidx);
+			}
+
 			if (link_ok != lc->link_ok || speed != lc->speed ||
 			    fc != lc->fc) {
 				/* something changed */
 				lc->link_ok = link_ok;
 				lc->speed = speed;
 				lc->fc = fc;
+				lc->supported =
+					be16_to_cpu(port_cmd->u.info.pcap);
 				t4vf_os_link_changed(adapter, pidx, link_ok);
 			}
 		}

drivers/net/ethernet/cisco/enic/enic_main.c

@@ -1060,10 +1060,14 @@ static void enic_rq_indicate_buf(struct vnic_rq *rq,
 				     PKT_HASH_TYPE_L4 : PKT_HASH_TYPE_L3);
 		}
 
-		if ((netdev->features & NETIF_F_RXCSUM) && !csum_not_calc) {
-			skb->csum = htons(checksum);
-			skb->ip_summed = CHECKSUM_COMPLETE;
-		}
+		/* Hardware does not provide whole packet checksum. It only
+		 * provides pseudo checksum. Since hw validates the packet
+		 * checksum but not provide us the checksum value. use
+		 * CHECSUM_UNNECESSARY.
+		 */
+		if ((netdev->features & NETIF_F_RXCSUM) && tcp_udp_csum_ok &&
+		    ipv4_csum_ok)
+			skb->ip_summed = CHECKSUM_UNNECESSARY;
 
 		if (vlan_stripped)
 			__vlan_hwaccel_put_tag(skb, htons(ETH_P_8021Q), vlan_tci);

drivers/net/ethernet/emulex/benet/be_main.c

@@ -4459,9 +4459,11 @@ done:
 	adapter->vxlan_port_count--;
 }
 
-static bool be_gso_check(struct sk_buff *skb, struct net_device *dev)
+static netdev_features_t be_features_check(struct sk_buff *skb,
+					   struct net_device *dev,
+					   netdev_features_t features)
 {
-	return vxlan_gso_check(skb);
+	return vxlan_features_check(skb, features);
 }
 #endif
 
@@ -4492,7 +4494,7 @@ static const struct net_device_ops be_netdev_ops = {
 #ifdef CONFIG_BE2NET_VXLAN
 	.ndo_add_vxlan_port	= be_add_vxlan_port,
 	.ndo_del_vxlan_port	= be_del_vxlan_port,
-	.ndo_gso_check		= be_gso_check,
+	.ndo_features_check	= be_features_check,
 #endif
 };
 

drivers/net/ethernet/mellanox/mlx4/en_netdev.c

@@ -2365,9 +2365,11 @@ static void mlx4_en_del_vxlan_port(struct  net_device *dev,
 	queue_work(priv->mdev->workqueue, &priv->vxlan_del_task);
 }
 
-static bool mlx4_en_gso_check(struct sk_buff *skb, struct net_device *dev)
+static netdev_features_t mlx4_en_features_check(struct sk_buff *skb,
+						struct net_device *dev,
+						netdev_features_t features)
 {
-	return vxlan_gso_check(skb);
+	return vxlan_features_check(skb, features);
 }
 #endif
 
@@ -2400,7 +2402,7 @@ static const struct net_device_ops mlx4_netdev_ops = {
 #ifdef CONFIG_MLX4_EN_VXLAN
 	.ndo_add_vxlan_port	= mlx4_en_add_vxlan_port,
 	.ndo_del_vxlan_port	= mlx4_en_del_vxlan_port,
-	.ndo_gso_check		= mlx4_en_gso_check,
+	.ndo_features_check	= mlx4_en_features_check,
 #endif
 };
 
@@ -2434,7 +2436,7 @@ static const struct net_device_ops mlx4_netdev_ops_master = {
 #ifdef CONFIG_MLX4_EN_VXLAN
 	.ndo_add_vxlan_port	= mlx4_en_add_vxlan_port,
 	.ndo_del_vxlan_port	= mlx4_en_del_vxlan_port,
-	.ndo_gso_check		= mlx4_en_gso_check,
+	.ndo_features_check	= mlx4_en_features_check,
 #endif
 };
 

drivers/net/ethernet/mellanox/mlx4/en_tx.c

@@ -962,7 +962,17 @@ netdev_tx_t mlx4_en_xmit(struct sk_buff *skb, struct net_device *dev)
 		tx_desc->ctrl.owner_opcode = op_own;
 		if (send_doorbell) {
 			wmb();
-			iowrite32(ring->doorbell_qpn,
+			/* Since there is no iowrite*_native() that writes the
+			 * value as is, without byteswapping - using the one
+			 * the doesn't do byteswapping in the relevant arch
+			 * endianness.
+			 */
+#if defined(__LITTLE_ENDIAN)
+			iowrite32(
+#else
+			iowrite32be(
+#endif
+				  ring->doorbell_qpn,
 				  ring->bf.uar->map + MLX4_SEND_DOORBELL);
 		} else {
 			ring->xmit_more++;

drivers/net/ethernet/micrel/ksz884x.c

@@ -2303,12 +2303,6 @@ static inline int port_chk_force_flow_ctrl(struct ksz_hw *hw, int p)
 
 /* Spanning Tree */
 
-static inline void port_cfg_dis_learn(struct ksz_hw *hw, int p, int set)
-{
-	port_cfg(hw, p,
-		KS8842_PORT_CTRL_2_OFFSET, PORT_LEARN_DISABLE, set);
-}
-
 static inline void port_cfg_rx(struct ksz_hw *hw, int p, int set)
 {
 	port_cfg(hw, p,

drivers/net/ethernet/qlogic/qlcnic/qlcnic_main.c

@@ -505,9 +505,11 @@ static void qlcnic_del_vxlan_port(struct net_device *netdev,
 	adapter->flags |= QLCNIC_DEL_VXLAN_PORT;
 }
 
-static bool qlcnic_gso_check(struct sk_buff *skb, struct net_device *dev)
+static netdev_features_t qlcnic_features_check(struct sk_buff *skb,
+					       struct net_device *dev,
+					       netdev_features_t features)
 {
-	return vxlan_gso_check(skb);
+	return vxlan_features_check(skb, features);
 }
 #endif
 
@@ -532,7 +534,7 @@ static const struct net_device_ops qlcnic_netdev_ops = {
 #ifdef CONFIG_QLCNIC_VXLAN
 	.ndo_add_vxlan_port	= qlcnic_add_vxlan_port,
 	.ndo_del_vxlan_port	= qlcnic_del_vxlan_port,
-	.ndo_gso_check		= qlcnic_gso_check,
+	.ndo_features_check	= qlcnic_features_check,
 #endif
 #ifdef CONFIG_NET_POLL_CONTROLLER
 	.ndo_poll_controller = qlcnic_poll_controller,

drivers/net/ethernet/realtek/8139too.c

@@ -787,10 +787,10 @@ static struct net_device *rtl8139_init_board(struct pci_dev *pdev)
 	if (rc)
 		goto err_out;
 
+	disable_dev_on_err = 1;
 	rc = pci_request_regions (pdev, DRV_NAME);
 	if (rc)
 		goto err_out;
-	disable_dev_on_err = 1;
 
 	pci_set_master (pdev);
 
@@ -1110,6 +1110,7 @@ static int rtl8139_init_one(struct pci_dev *pdev,
 	return 0;
 
 err_out:
+	netif_napi_del(&tp->napi);
 	__rtl8139_cleanup_dev (dev);
 	pci_disable_device (pdev);
 	return i;
@@ -1124,6 +1125,7 @@ static void rtl8139_remove_one(struct pci_dev *pdev)
 	assert (dev != NULL);
 
 	cancel_delayed_work_sync(&tp->thread);
+	netif_napi_del(&tp->napi);
 
 	unregister_netdev (dev);
 

drivers/net/ethernet/s6gmac.c

@@ -1,1058 +0,0 @@
-/*
- * Ethernet driver for S6105 on chip network device
- * (c)2008 emlix GmbH http://www.emlix.com
- * Authors:	Oskar Schirmer <oskar@scara.com>
- *		Daniel Gloeckner <dg@emlix.com>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version
- * 2 of the License, or (at your option) any later version.
- */
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/interrupt.h>
-#include <linux/types.h>
-#include <linux/delay.h>
-#include <linux/spinlock.h>
-#include <linux/netdevice.h>
-#include <linux/etherdevice.h>
-#include <linux/if.h>
-#include <linux/stddef.h>
-#include <linux/mii.h>
-#include <linux/phy.h>
-#include <linux/platform_device.h>
-#include <variant/hardware.h>
-#include <variant/dmac.h>
-
-#define DRV_NAME "s6gmac"
-#define DRV_PRMT DRV_NAME ": "
-
-
-/* register declarations */
-
-#define S6_GMAC_MACCONF1	0x000
-#define S6_GMAC_MACCONF1_TXENA		0
-#define S6_GMAC_MACCONF1_SYNCTX		1
-#define S6_GMAC_MACCONF1_RXENA		2
-#define S6_GMAC_MACCONF1_SYNCRX		3
-#define S6_GMAC_MACCONF1_TXFLOWCTRL	4
-#define S6_GMAC_MACCONF1_RXFLOWCTRL	5
-#define S6_GMAC_MACCONF1_LOOPBACK	8
-#define S6_GMAC_MACCONF1_RESTXFUNC	16
-#define S6_GMAC_MACCONF1_RESRXFUNC	17
-#define S6_GMAC_MACCONF1_RESTXMACCTRL	18
-#define S6_GMAC_MACCONF1_RESRXMACCTRL	19
-#define S6_GMAC_MACCONF1_SIMULRES	30
-#define S6_GMAC_MACCONF1_SOFTRES	31
-#define S6_GMAC_MACCONF2	0x004
-#define S6_GMAC_MACCONF2_FULL		0
-#define S6_GMAC_MACCONF2_CRCENA		1
-#define S6_GMAC_MACCONF2_PADCRCENA	2
-#define S6_GMAC_MACCONF2_LENGTHFCHK	4
-#define S6_GMAC_MACCONF2_HUGEFRAMENA	5
-#define S6_GMAC_MACCONF2_IFMODE		8
-#define S6_GMAC_MACCONF2_IFMODE_NIBBLE		1
-#define S6_GMAC_MACCONF2_IFMODE_BYTE		2
-#define S6_GMAC_MACCONF2_IFMODE_MASK		3
-#define S6_GMAC_MACCONF2_PREAMBLELEN	12
-#define S6_GMAC_MACCONF2_PREAMBLELEN_MASK	0x0F
-#define S6_GMAC_MACIPGIFG	0x008
-#define S6_GMAC_MACIPGIFG_B2BINTERPGAP	0
-#define S6_GMAC_MACIPGIFG_B2BINTERPGAP_MASK	0x7F
-#define S6_GMAC_MACIPGIFG_MINIFGENFORCE	8
-#define S6_GMAC_MACIPGIFG_B2BINTERPGAP2	16
-#define S6_GMAC_MACIPGIFG_B2BINTERPGAP1	24
-#define S6_GMAC_MACHALFDUPLEX	0x00C
-#define S6_GMAC_MACHALFDUPLEX_COLLISWIN	0
-#define S6_GMAC_MACHALFDUPLEX_COLLISWIN_MASK	0x3F
-#define S6_GMAC_MACHALFDUPLEX_RETXMAX	12
-#define S6_GMAC_MACHALFDUPLEX_RETXMAX_MASK	0x0F
-#define S6_GMAC_MACHALFDUPLEX_EXCESSDEF	16
-#define S6_GMAC_MACHALFDUPLEX_NOBACKOFF	17
-#define S6_GMAC_MACHALFDUPLEX_BPNOBCKOF	18
-#define S6_GMAC_MACHALFDUPLEX_ALTBEBENA	19
-#define S6_GMAC_MACHALFDUPLEX_ALTBEBTRN	20
-#define S6_GMAC_MACHALFDUPLEX_ALTBEBTR_MASK	0x0F
-#define S6_GMAC_MACMAXFRAMELEN	0x010
-#define S6_GMAC_MACMIICONF	0x020
-#define S6_GMAC_MACMIICONF_CSEL		0
-#define S6_GMAC_MACMIICONF_CSEL_DIV10		0
-#define S6_GMAC_MACMIICONF_CSEL_DIV12		1
-#define S6_GMAC_MACMIICONF_CSEL_DIV14		2
-#define S6_GMAC_MACMIICONF_CSEL_DIV18		3
-#define S6_GMAC_MACMIICONF_CSEL_DIV24		4
-#define S6_GMAC_MACMIICONF_CSEL_DIV34		5
-#define S6_GMAC_MACMIICONF_CSEL_DIV68		6
-#define S6_GMAC_MACMIICONF_CSEL_DIV168		7
-#define S6_GMAC_MACMIICONF_CSEL_MASK		7
-#define S6_GMAC_MACMIICONF_PREAMBLESUPR	4
-#define S6_GMAC_MACMIICONF_SCANAUTOINCR	5
-#define S6_GMAC_MACMIICMD	0x024
-#define S6_GMAC_MACMIICMD_READ		0
-#define S6_GMAC_MACMIICMD_SCAN		1
-#define S6_GMAC_MACMIIADDR	0x028
-#define S6_GMAC_MACMIIADDR_REG		0
-#define S6_GMAC_MACMIIADDR_REG_MASK		0x1F
-#define S6_GMAC_MACMIIADDR_PHY		8
-#define S6_GMAC_MACMIIADDR_PHY_MASK		0x1F
-#define S6_GMAC_MACMIICTRL	0x02C
-#define S6_GMAC_MACMIISTAT	0x030
-#define S6_GMAC_MACMIIINDI	0x034
-#define S6_GMAC_MACMIIINDI_BUSY		0
-#define S6_GMAC_MACMIIINDI_SCAN		1
-#define S6_GMAC_MACMIIINDI_INVAL	2
-#define S6_GMAC_MACINTERFSTAT	0x03C
-#define S6_GMAC_MACINTERFSTAT_LINKFAIL	3
-#define S6_GMAC_MACINTERFSTAT_EXCESSDEF	9
-#define S6_GMAC_MACSTATADDR1	0x040
-#define S6_GMAC_MACSTATADDR2	0x044
-
-#define S6_GMAC_FIFOCONF0	0x048
-#define S6_GMAC_FIFOCONF0_HSTRSTWT	0
-#define S6_GMAC_FIFOCONF0_HSTRSTSR	1
-#define S6_GMAC_FIFOCONF0_HSTRSTFR	2
-#define S6_GMAC_FIFOCONF0_HSTRSTST	3
-#define S6_GMAC_FIFOCONF0_HSTRSTFT	4
-#define S6_GMAC_FIFOCONF0_WTMENREQ	8
-#define S6_GMAC_FIFOCONF0_SRFENREQ	9
-#define S6_GMAC_FIFOCONF0_FRFENREQ	10
-#define S6_GMAC_FIFOCONF0_STFENREQ	11
-#define S6_GMAC_FIFOCONF0_FTFENREQ	12
-#define S6_GMAC_FIFOCONF0_WTMENRPLY	16
-#define S6_GMAC_FIFOCONF0_SRFENRPLY	17
-#define S6_GMAC_FIFOCONF0_FRFENRPLY	18
-#define S6_GMAC_FIFOCONF0_STFENRPLY	19
-#define S6_GMAC_FIFOCONF0_FTFENRPLY	20
-#define S6_GMAC_FIFOCONF1	0x04C
-#define S6_GMAC_FIFOCONF2	0x050
-#define S6_GMAC_FIFOCONF2_CFGLWM	0
-#define S6_GMAC_FIFOCONF2_CFGHWM	16
-#define S6_GMAC_FIFOCONF3	0x054
-#define S6_GMAC_FIFOCONF3_CFGFTTH	0
-#define S6_GMAC_FIFOCONF3_CFGHWMFT	16
-#define S6_GMAC_FIFOCONF4	0x058
-#define S6_GMAC_FIFOCONF_RSV_PREVDROP	0
-#define S6_GMAC_FIFOCONF_RSV_RUNT	1
-#define S6_GMAC_FIFOCONF_RSV_FALSECAR	2
-#define S6_GMAC_FIFOCONF_RSV_CODEERR	3
-#define S6_GMAC_FIFOCONF_RSV_CRCERR	4
-#define S6_GMAC_FIFOCONF_RSV_LENGTHERR	5
-#define S6_GMAC_FIFOCONF_RSV_LENRANGE	6
-#define S6_GMAC_FIFOCONF_RSV_OK		7
-#define S6_GMAC_FIFOCONF_RSV_MULTICAST	8
-#define S6_GMAC_FIFOCONF_RSV_BROADCAST	9
-#define S6_GMAC_FIFOCONF_RSV_DRIBBLE	10
-#define S6_GMAC_FIFOCONF_RSV_CTRLFRAME	11
-#define S6_GMAC_FIFOCONF_RSV_PAUSECTRL	12
-#define S6_GMAC_FIFOCONF_RSV_UNOPCODE	13
-#define S6_GMAC_FIFOCONF_RSV_VLANTAG	14
-#define S6_GMAC_FIFOCONF_RSV_LONGEVENT	15
-#define S6_GMAC_FIFOCONF_RSV_TRUNCATED	16
-#define S6_GMAC_FIFOCONF_RSV_MASK		0x3FFFF
-#define S6_GMAC_FIFOCONF5	0x05C
-#define S6_GMAC_FIFOCONF5_DROPLT64	18
-#define S6_GMAC_FIFOCONF5_CFGBYTM	19
-#define S6_GMAC_FIFOCONF5_RXDROPSIZE	20
-#define S6_GMAC_FIFOCONF5_RXDROPSIZE_MASK	0xF
-
-#define S6_GMAC_STAT_REGS	0x080
-#define S6_GMAC_STAT_SIZE_MIN		12
-#define S6_GMAC_STATTR64	0x080
-#define S6_GMAC_STATTR64_SIZE		18
-#define S6_GMAC_STATTR127	0x084
-#define S6_GMAC_STATTR127_SIZE		18
-#define S6_GMAC_STATTR255	0x088
-#define S6_GMAC_STATTR255_SIZE		18
-#define S6_GMAC_STATTR511	0x08C
-#define S6_GMAC_STATTR511_SIZE		18
-#define S6_GMAC_STATTR1K	0x090
-#define S6_GMAC_STATTR1K_SIZE		18
-#define S6_GMAC_STATTRMAX	0x094
-#define S6_GMAC_STATTRMAX_SIZE		18
-#define S6_GMAC_STATTRMGV	0x098
-#define S6_GMAC_STATTRMGV_SIZE		18
-#define S6_GMAC_STATRBYT	0x09C
-#define S6_GMAC_STATRBYT_SIZE		24
-#define S6_GMAC_STATRPKT	0x0A0
-#define S6_GMAC_STATRPKT_SIZE		18
-#define S6_GMAC_STATRFCS	0x0A4
-#define S6_GMAC_STATRFCS_SIZE		12
-#define S6_GMAC_STATRMCA	0x0A8
-#define S6_GMAC_STATRMCA_SIZE		18
-#define S6_GMAC_STATRBCA	0x0AC
-#define S6_GMAC_STATRBCA_SIZE		22
-#define S6_GMAC_STATRXCF	0x0B0
-#define S6_GMAC_STATRXCF_SIZE		18
-#define S6_GMAC_STATRXPF	0x0B4
-#define S6_GMAC_STATRXPF_SIZE		12
-#define S6_GMAC_STATRXUO	0x0B8
-#define S6_GMAC_STATRXUO_SIZE		12
-#define S6_GMAC_STATRALN	0x0BC
-#define S6_GMAC_STATRALN_SIZE		12
-#define S6_GMAC_STATRFLR	0x0C0
-#define S6_GMAC_STATRFLR_SIZE		16
-#define S6_GMAC_STATRCDE	0x0C4
-#define S6_GMAC_STATRCDE_SIZE		12
-#define S6_GMAC_STATRCSE	0x0C8
-#define S6_GMAC_STATRCSE_SIZE		12
-#define S6_GMAC_STATRUND	0x0CC
-#define S6_GMAC_STATRUND_SIZE		12
-#define S6_GMAC_STATROVR	0x0D0
-#define S6_GMAC_STATROVR_SIZE		12
-#define S6_GMAC_STATRFRG	0x0D4
-#define S6_GMAC_STATRFRG_SIZE		12
-#define S6_GMAC_STATRJBR	0x0D8
-#define S6_GMAC_STATRJBR_SIZE		12
-#define S6_GMAC_STATRDRP	0x0DC
-#define S6_GMAC_STATRDRP_SIZE		12
-#define S6_GMAC_STATTBYT	0x0E0
-#define S6_GMAC_STATTBYT_SIZE		24
-#define S6_GMAC_STATTPKT	0x0E4
-#define S6_GMAC_STATTPKT_SIZE		18
-#define S6_GMAC_STATTMCA	0x0E8
-#define S6_GMAC_STATTMCA_SIZE		18
-#define S6_GMAC_STATTBCA	0x0EC
-#define S6_GMAC_STATTBCA_SIZE		18
-#define S6_GMAC_STATTXPF	0x0F0
-#define S6_GMAC_STATTXPF_SIZE		12
-#define S6_GMAC_STATTDFR	0x0F4
-#define S6_GMAC_STATTDFR_SIZE		12
-#define S6_GMAC_STATTEDF	0x0F8
-#define S6_GMAC_STATTEDF_SIZE		12
-#define S6_GMAC_STATTSCL	0x0FC
-#define S6_GMAC_STATTSCL_SIZE		12
-#define S6_GMAC_STATTMCL	0x100
-#define S6_GMAC_STATTMCL_SIZE		12
-#define S6_GMAC_STATTLCL	0x104
-#define S6_GMAC_STATTLCL_SIZE		12
-#define S6_GMAC_STATTXCL	0x108
-#define S6_GMAC_STATTXCL_SIZE		12
-#define S6_GMAC_STATTNCL	0x10C
-#define S6_GMAC_STATTNCL_SIZE		13
-#define S6_GMAC_STATTPFH	0x110
-#define S6_GMAC_STATTPFH_SIZE		12
-#define S6_GMAC_STATTDRP	0x114
-#define S6_GMAC_STATTDRP_SIZE		12
-#define S6_GMAC_STATTJBR	0x118
-#define S6_GMAC_STATTJBR_SIZE		12
-#define S6_GMAC_STATTFCS	0x11C
-#define S6_GMAC_STATTFCS_SIZE		12
-#define S6_GMAC_STATTXCF	0x120
-#define S6_GMAC_STATTXCF_SIZE		12
-#define S6_GMAC_STATTOVR	0x124
-#define S6_GMAC_STATTOVR_SIZE		12
-#define S6_GMAC_STATTUND	0x128
-#define S6_GMAC_STATTUND_SIZE		12
-#define S6_GMAC_STATTFRG	0x12C
-#define S6_GMAC_STATTFRG_SIZE		12
-#define S6_GMAC_STATCARRY(n)	(0x130 + 4*(n))
-#define S6_GMAC_STATCARRYMSK(n)	(0x138 + 4*(n))
-#define S6_GMAC_STATCARRY1_RDRP		0
-#define S6_GMAC_STATCARRY1_RJBR		1
-#define S6_GMAC_STATCARRY1_RFRG		2
-#define S6_GMAC_STATCARRY1_ROVR		3
-#define S6_GMAC_STATCARRY1_RUND		4
-#define S6_GMAC_STATCARRY1_RCSE		5
-#define S6_GMAC_STATCARRY1_RCDE		6
-#define S6_GMAC_STATCARRY1_RFLR		7
-#define S6_GMAC_STATCARRY1_RALN		8
-#define S6_GMAC_STATCARRY1_RXUO		9
-#define S6_GMAC_STATCARRY1_RXPF		10
-#define S6_GMAC_STATCARRY1_RXCF		11
-#define S6_GMAC_STATCARRY1_RBCA		12
-#define S6_GMAC_STATCARRY1_RMCA		13
-#define S6_GMAC_STATCARRY1_RFCS		14
-#define S6_GMAC_STATCARRY1_RPKT		15
-#define S6_GMAC_STATCARRY1_RBYT		16
-#define S6_GMAC_STATCARRY1_TRMGV	25
-#define S6_GMAC_STATCARRY1_TRMAX	26
-#define S6_GMAC_STATCARRY1_TR1K		27
-#define S6_GMAC_STATCARRY1_TR511	28
-#define S6_GMAC_STATCARRY1_TR255	29
-#define S6_GMAC_STATCARRY1_TR127	30
-#define S6_GMAC_STATCARRY1_TR64		31
-#define S6_GMAC_STATCARRY2_TDRP		0
-#define S6_GMAC_STATCARRY2_TPFH		1
-#define S6_GMAC_STATCARRY2_TNCL		2
-#define S6_GMAC_STATCARRY2_TXCL		3
-#define S6_GMAC_STATCARRY2_TLCL		4
-#define S6_GMAC_STATCARRY2_TMCL		5
-#define S6_GMAC_STATCARRY2_TSCL		6
-#define S6_GMAC_STATCARRY2_TEDF		7
-#define S6_GMAC_STATCARRY2_TDFR		8
-#define S6_GMAC_STATCARRY2_TXPF		9
-#define S6_GMAC_STATCARRY2_TBCA		10
-#define S6_GMAC_STATCARRY2_TMCA		11
-#define S6_GMAC_STATCARRY2_TPKT		12
-#define S6_GMAC_STATCARRY2_TBYT		13
-#define S6_GMAC_STATCARRY2_TFRG		14
-#define S6_GMAC_STATCARRY2_TUND		15
-#define S6_GMAC_STATCARRY2_TOVR		16
-#define S6_GMAC_STATCARRY2_TXCF		17
-#define S6_GMAC_STATCARRY2_TFCS		18
-#define S6_GMAC_STATCARRY2_TJBR		19
-
-#define S6_GMAC_HOST_PBLKCTRL	0x140
-#define S6_GMAC_HOST_PBLKCTRL_TXENA	0
-#define S6_GMAC_HOST_PBLKCTRL_RXENA	1
-#define S6_GMAC_HOST_PBLKCTRL_TXSRES	2
-#define S6_GMAC_HOST_PBLKCTRL_RXSRES	3
-#define S6_GMAC_HOST_PBLKCTRL_TXBSIZ	8
-#define S6_GMAC_HOST_PBLKCTRL_RXBSIZ	12
-#define S6_GMAC_HOST_PBLKCTRL_SIZ_16		4
-#define S6_GMAC_HOST_PBLKCTRL_SIZ_32		5
-#define S6_GMAC_HOST_PBLKCTRL_SIZ_64		6
-#define S6_GMAC_HOST_PBLKCTRL_SIZ_128		7
-#define S6_GMAC_HOST_PBLKCTRL_SIZ_MASK		0xF
-#define S6_GMAC_HOST_PBLKCTRL_STATENA	16
-#define S6_GMAC_HOST_PBLKCTRL_STATAUTOZ	17
-#define S6_GMAC_HOST_PBLKCTRL_STATCLEAR	18
-#define S6_GMAC_HOST_PBLKCTRL_RGMII	19
-#define S6_GMAC_HOST_INTMASK	0x144
-#define S6_GMAC_HOST_INTSTAT	0x148
-#define S6_GMAC_HOST_INT_TXBURSTOVER	3
-#define S6_GMAC_HOST_INT_TXPREWOVER	4
-#define S6_GMAC_HOST_INT_RXBURSTUNDER	5
-#define S6_GMAC_HOST_INT_RXPOSTRFULL	6
-#define S6_GMAC_HOST_INT_RXPOSTRUNDER	7
-#define S6_GMAC_HOST_RXFIFOHWM	0x14C
-#define S6_GMAC_HOST_CTRLFRAMXP	0x150
-#define S6_GMAC_HOST_DSTADDRLO(n) (0x160 + 8*(n))
-#define S6_GMAC_HOST_DSTADDRHI(n) (0x164 + 8*(n))
-#define S6_GMAC_HOST_DSTMASKLO(n) (0x180 + 8*(n))
-#define S6_GMAC_HOST_DSTMASKHI(n) (0x184 + 8*(n))
-
-#define S6_GMAC_BURST_PREWR	0x1B0
-#define S6_GMAC_BURST_PREWR_LEN		0
-#define S6_GMAC_BURST_PREWR_LEN_MASK		((1 << 20) - 1)
-#define S6_GMAC_BURST_PREWR_CFE		20
-#define S6_GMAC_BURST_PREWR_PPE		21
-#define S6_GMAC_BURST_PREWR_FCS		22
-#define S6_GMAC_BURST_PREWR_PAD		23
-#define S6_GMAC_BURST_POSTRD	0x1D0
-#define S6_GMAC_BURST_POSTRD_LEN	0
-#define S6_GMAC_BURST_POSTRD_LEN_MASK		((1 << 20) - 1)
-#define S6_GMAC_BURST_POSTRD_DROP	20
-
-
-/* data handling */
-
-#define S6_NUM_TX_SKB	8	/* must be larger than TX fifo size */
-#define S6_NUM_RX_SKB	16
-#define S6_MAX_FRLEN	1536
-
-struct s6gmac {
-	u32 reg;
-	u32 tx_dma;
-	u32 rx_dma;
-	u32 io;
-	u8 tx_chan;
-	u8 rx_chan;
-	spinlock_t lock;
-	u8 tx_skb_i, tx_skb_o;
-	u8 rx_skb_i, rx_skb_o;
-	struct sk_buff *tx_skb[S6_NUM_TX_SKB];
-	struct sk_buff *rx_skb[S6_NUM_RX_SKB];
-	unsigned long carry[sizeof(struct net_device_stats) / sizeof(long)];
-	unsigned long stats[sizeof(struct net_device_stats) / sizeof(long)];
-	struct phy_device *phydev;
-	struct {
-		struct mii_bus *bus;
-		int irq[PHY_MAX_ADDR];
-	} mii;
-	struct {
-		unsigned int mbit;
-		u8 giga;
-		u8 isup;
-		u8 full;
-	} link;
-};
-
-static void s6gmac_rx_fillfifo(struct net_device *dev)
-{
-	struct s6gmac *pd = netdev_priv(dev);
-	struct sk_buff *skb;
-	while ((((u8)(pd->rx_skb_i - pd->rx_skb_o)) < S6_NUM_RX_SKB) &&
-	       (!s6dmac_fifo_full(pd->rx_dma, pd->rx_chan)) &&
-	       (skb = netdev_alloc_skb(dev, S6_MAX_FRLEN + 2))) {
-		pd->rx_skb[(pd->rx_skb_i++) % S6_NUM_RX_SKB] = skb;
-		s6dmac_put_fifo_cache(pd->rx_dma, pd->rx_chan,
-			pd->io, (u32)skb->data, S6_MAX_FRLEN);
-	}
-}
-
-static void s6gmac_rx_interrupt(struct net_device *dev)
-{
-	struct s6gmac *pd = netdev_priv(dev);
-	u32 pfx;
-	struct sk_buff *skb;
-	while (((u8)(pd->rx_skb_i - pd->rx_skb_o)) >
-			s6dmac_pending_count(pd->rx_dma, pd->rx_chan)) {
-		skb = pd->rx_skb[(pd->rx_skb_o++) % S6_NUM_RX_SKB];
-		pfx = readl(pd->reg + S6_GMAC_BURST_POSTRD);
-		if (pfx & (1 << S6_GMAC_BURST_POSTRD_DROP)) {
-			dev_kfree_skb_irq(skb);
-		} else {
-			skb_put(skb, (pfx >> S6_GMAC_BURST_POSTRD_LEN)
-				& S6_GMAC_BURST_POSTRD_LEN_MASK);
-			skb->protocol = eth_type_trans(skb, dev);
-			skb->ip_summed = CHECKSUM_UNNECESSARY;
-			netif_rx(skb);
-		}
-	}
-}
-
-static void s6gmac_tx_interrupt(struct net_device *dev)
-{
-	struct s6gmac *pd = netdev_priv(dev);
-	while (((u8)(pd->tx_skb_i - pd->tx_skb_o)) >
-			s6dmac_pending_count(pd->tx_dma, pd->tx_chan)) {
-		dev_kfree_skb_irq(pd->tx_skb[(pd->tx_skb_o++) % S6_NUM_TX_SKB]);
-	}
-	if (!s6dmac_fifo_full(pd->tx_dma, pd->tx_chan))
-		netif_wake_queue(dev);
-}
-
-struct s6gmac_statinf {
-	unsigned reg_size : 4; /* 0: unused */
-	unsigned reg_off : 6;
-	unsigned net_index : 6;
-};
-
-#define S6_STATS_B (8 * sizeof(u32))
-#define S6_STATS_C(b, r, f) [b] = { \
-	BUILD_BUG_ON_ZERO(r##_SIZE < S6_GMAC_STAT_SIZE_MIN) + \
-	BUILD_BUG_ON_ZERO((r##_SIZE - (S6_GMAC_STAT_SIZE_MIN - 1)) \
-			>= (1<<4)) + \
-	r##_SIZE - (S6_GMAC_STAT_SIZE_MIN - 1), \
-	BUILD_BUG_ON_ZERO(((unsigned)((r - S6_GMAC_STAT_REGS) / sizeof(u32))) \
-			>= ((1<<6)-1)) + \
-	(r - S6_GMAC_STAT_REGS) / sizeof(u32), \
-	BUILD_BUG_ON_ZERO((offsetof(struct net_device_stats, f)) \
-			% sizeof(unsigned long)) + \
-	BUILD_BUG_ON_ZERO((((unsigned)(offsetof(struct net_device_stats, f)) \
-			/ sizeof(unsigned long)) >= (1<<6))) + \
-	BUILD_BUG_ON_ZERO((sizeof(((struct net_device_stats *)0)->f) \
-			!= sizeof(unsigned long))) + \
-	(offsetof(struct net_device_stats, f)) / sizeof(unsigned long)},
-
-static const struct s6gmac_statinf statinf[2][S6_STATS_B] = { {
-	S6_STATS_C(S6_GMAC_STATCARRY1_RBYT, S6_GMAC_STATRBYT, rx_bytes)
-	S6_STATS_C(S6_GMAC_STATCARRY1_RPKT, S6_GMAC_STATRPKT, rx_packets)
-	S6_STATS_C(S6_GMAC_STATCARRY1_RFCS, S6_GMAC_STATRFCS, rx_crc_errors)
-	S6_STATS_C(S6_GMAC_STATCARRY1_RMCA, S6_GMAC_STATRMCA, multicast)
-	S6_STATS_C(S6_GMAC_STATCARRY1_RALN, S6_GMAC_STATRALN, rx_frame_errors)
-	S6_STATS_C(S6_GMAC_STATCARRY1_RFLR, S6_GMAC_STATRFLR, rx_length_errors)
-	S6_STATS_C(S6_GMAC_STATCARRY1_RCDE, S6_GMAC_STATRCDE, rx_missed_errors)
-	S6_STATS_C(S6_GMAC_STATCARRY1_RUND, S6_GMAC_STATRUND, rx_length_errors)
-	S6_STATS_C(S6_GMAC_STATCARRY1_ROVR, S6_GMAC_STATROVR, rx_length_errors)
-	S6_STATS_C(S6_GMAC_STATCARRY1_RFRG, S6_GMAC_STATRFRG, rx_crc_errors)
-	S6_STATS_C(S6_GMAC_STATCARRY1_RJBR, S6_GMAC_STATRJBR, rx_crc_errors)
-	S6_STATS_C(S6_GMAC_STATCARRY1_RDRP, S6_GMAC_STATRDRP, rx_dropped)
-}, {
-	S6_STATS_C(S6_GMAC_STATCARRY2_TBYT, S6_GMAC_STATTBYT, tx_bytes)
-	S6_STATS_C(S6_GMAC_STATCARRY2_TPKT, S6_GMAC_STATTPKT, tx_packets)
-	S6_STATS_C(S6_GMAC_STATCARRY2_TEDF, S6_GMAC_STATTEDF, tx_aborted_errors)
-	S6_STATS_C(S6_GMAC_STATCARRY2_TXCL, S6_GMAC_STATTXCL, tx_aborted_errors)
-	S6_STATS_C(S6_GMAC_STATCARRY2_TNCL, S6_GMAC_STATTNCL, collisions)
-	S6_STATS_C(S6_GMAC_STATCARRY2_TDRP, S6_GMAC_STATTDRP, tx_dropped)
-	S6_STATS_C(S6_GMAC_STATCARRY2_TJBR, S6_GMAC_STATTJBR, tx_errors)
-	S6_STATS_C(S6_GMAC_STATCARRY2_TFCS, S6_GMAC_STATTFCS, tx_errors)
-	S6_STATS_C(S6_GMAC_STATCARRY2_TOVR, S6_GMAC_STATTOVR, tx_errors)
-	S6_STATS_C(S6_GMAC_STATCARRY2_TUND, S6_GMAC_STATTUND, tx_errors)
-	S6_STATS_C(S6_GMAC_STATCARRY2_TFRG, S6_GMAC_STATTFRG, tx_errors)
-} };
-
-static void s6gmac_stats_collect(struct s6gmac *pd,
-		const struct s6gmac_statinf *inf)
-{
-	int b;
-	for (b = 0; b < S6_STATS_B; b++) {
-		if (inf[b].reg_size) {
-			pd->stats[inf[b].net_index] +=
-				readl(pd->reg + S6_GMAC_STAT_REGS
-					+ sizeof(u32) * inf[b].reg_off);
-		}
-	}
-}
-
-static void s6gmac_stats_carry(struct s6gmac *pd,
-		const struct s6gmac_statinf *inf, u32 mask)
-{
-	int b;
-	while (mask) {
-		b = fls(mask) - 1;
-		mask &= ~(1 << b);
-		pd->carry[inf[b].net_index] += (1 << inf[b].reg_size);
-	}
-}
-
-static inline u32 s6gmac_stats_pending(struct s6gmac *pd, int carry)
-{
-	int r = readl(pd->reg + S6_GMAC_STATCARRY(carry)) &
-		~readl(pd->reg + S6_GMAC_STATCARRYMSK(carry));
-	return r;
-}
-
-static inline void s6gmac_stats_interrupt(struct s6gmac *pd, int carry)
-{
-	u32 mask;
-	mask = s6gmac_stats_pending(pd, carry);
-	if (mask) {
-		writel(mask, pd->reg + S6_GMAC_STATCARRY(carry));
-		s6gmac_stats_carry(pd, &statinf[carry][0], mask);
-	}
-}
-
-static irqreturn_t s6gmac_interrupt(int irq, void *dev_id)
-{
-	struct net_device *dev = (struct net_device *)dev_id;
-	struct s6gmac *pd = netdev_priv(dev);
-	if (!dev)
-		return IRQ_NONE;
-	spin_lock(&pd->lock);
-	if (s6dmac_termcnt_irq(pd->rx_dma, pd->rx_chan))
-		s6gmac_rx_interrupt(dev);
-	s6gmac_rx_fillfifo(dev);
-	if (s6dmac_termcnt_irq(pd->tx_dma, pd->tx_chan))
-		s6gmac_tx_interrupt(dev);
-	s6gmac_stats_interrupt(pd, 0);
-	s6gmac_stats_interrupt(pd, 1);
-	spin_unlock(&pd->lock);
-	return IRQ_HANDLED;
-}
-
-static inline void s6gmac_set_dstaddr(struct s6gmac *pd, int n,
-	u32 addrlo, u32 addrhi, u32 masklo, u32 maskhi)
-{
-	writel(addrlo, pd->reg + S6_GMAC_HOST_DSTADDRLO(n));
-	writel(addrhi, pd->reg + S6_GMAC_HOST_DSTADDRHI(n));
-	writel(masklo, pd->reg + S6_GMAC_HOST_DSTMASKLO(n));
-	writel(maskhi, pd->reg + S6_GMAC_HOST_DSTMASKHI(n));
-}
-
-static inline void s6gmac_stop_device(struct net_device *dev)
-{
-	struct s6gmac *pd = netdev_priv(dev);
-	writel(0, pd->reg + S6_GMAC_MACCONF1);
-}
-
-static inline void s6gmac_init_device(struct net_device *dev)
-{
-	struct s6gmac *pd = netdev_priv(dev);
-	int is_rgmii = !!(pd->phydev->supported
-		& (SUPPORTED_1000baseT_Full | SUPPORTED_1000baseT_Half));
-#if 0
-	writel(1 << S6_GMAC_MACCONF1_SYNCTX |
-		1 << S6_GMAC_MACCONF1_SYNCRX |
-		1 << S6_GMAC_MACCONF1_TXFLOWCTRL |
-		1 << S6_GMAC_MACCONF1_RXFLOWCTRL |
-		1 << S6_GMAC_MACCONF1_RESTXFUNC |
-		1 << S6_GMAC_MACCONF1_RESRXFUNC |
-		1 << S6_GMAC_MACCONF1_RESTXMACCTRL |
-		1 << S6_GMAC_MACCONF1_RESRXMACCTRL,
-		pd->reg + S6_GMAC_MACCONF1);
-#endif
-	writel(1 << S6_GMAC_MACCONF1_SOFTRES, pd->reg + S6_GMAC_MACCONF1);
-	udelay(1000);
-	writel(1 << S6_GMAC_MACCONF1_TXENA | 1 << S6_GMAC_MACCONF1_RXENA,
-		pd->reg + S6_GMAC_MACCONF1);
-	writel(1 << S6_GMAC_HOST_PBLKCTRL_TXSRES |
-		1 << S6_GMAC_HOST_PBLKCTRL_RXSRES,
-		pd->reg + S6_GMAC_HOST_PBLKCTRL);
-	writel(S6_GMAC_HOST_PBLKCTRL_SIZ_128 << S6_GMAC_HOST_PBLKCTRL_TXBSIZ |
-		S6_GMAC_HOST_PBLKCTRL_SIZ_128 << S6_GMAC_HOST_PBLKCTRL_RXBSIZ |
-		1 << S6_GMAC_HOST_PBLKCTRL_STATENA |
-		1 << S6_GMAC_HOST_PBLKCTRL_STATCLEAR |
-		is_rgmii << S6_GMAC_HOST_PBLKCTRL_RGMII,
-		pd->reg + S6_GMAC_HOST_PBLKCTRL);
-	writel(1 << S6_GMAC_MACCONF1_TXENA |
-		1 << S6_GMAC_MACCONF1_RXENA |
-		(dev->flags & IFF_LOOPBACK ? 1 : 0)
-			<< S6_GMAC_MACCONF1_LOOPBACK,
-		pd->reg + S6_GMAC_MACCONF1);
-	writel(dev->mtu && (dev->mtu < (S6_MAX_FRLEN - ETH_HLEN-ETH_FCS_LEN)) ?
-			dev->mtu+ETH_HLEN+ETH_FCS_LEN : S6_MAX_FRLEN,
-		pd->reg + S6_GMAC_MACMAXFRAMELEN);
-	writel((pd->link.full ? 1 : 0) << S6_GMAC_MACCONF2_FULL |
-		1 << S6_GMAC_MACCONF2_PADCRCENA |
-		1 << S6_GMAC_MACCONF2_LENGTHFCHK |
-		(pd->link.giga ?
-			S6_GMAC_MACCONF2_IFMODE_BYTE :
-			S6_GMAC_MACCONF2_IFMODE_NIBBLE)
-			<< S6_GMAC_MACCONF2_IFMODE |
-		7 << S6_GMAC_MACCONF2_PREAMBLELEN,
-		pd->reg + S6_GMAC_MACCONF2);
-	writel(0, pd->reg + S6_GMAC_MACSTATADDR1);
-	writel(0, pd->reg + S6_GMAC_MACSTATADDR2);
-	writel(1 << S6_GMAC_FIFOCONF0_WTMENREQ |
-		1 << S6_GMAC_FIFOCONF0_SRFENREQ |
-		1 << S6_GMAC_FIFOCONF0_FRFENREQ |
-		1 << S6_GMAC_FIFOCONF0_STFENREQ |
-		1 << S6_GMAC_FIFOCONF0_FTFENREQ,
-		pd->reg + S6_GMAC_FIFOCONF0);
-	writel(128 << S6_GMAC_FIFOCONF3_CFGFTTH |
-		128 << S6_GMAC_FIFOCONF3_CFGHWMFT,
-		pd->reg + S6_GMAC_FIFOCONF3);
-	writel((S6_GMAC_FIFOCONF_RSV_MASK & ~(
-			1 << S6_GMAC_FIFOCONF_RSV_RUNT |
-			1 << S6_GMAC_FIFOCONF_RSV_CRCERR |
-			1 << S6_GMAC_FIFOCONF_RSV_OK |
-			1 << S6_GMAC_FIFOCONF_RSV_DRIBBLE |
-			1 << S6_GMAC_FIFOCONF_RSV_CTRLFRAME |
-			1 << S6_GMAC_FIFOCONF_RSV_PAUSECTRL |
-			1 << S6_GMAC_FIFOCONF_RSV_UNOPCODE |
-			1 << S6_GMAC_FIFOCONF_RSV_TRUNCATED)) |
-		1 << S6_GMAC_FIFOCONF5_DROPLT64 |
-		pd->link.giga << S6_GMAC_FIFOCONF5_CFGBYTM |
-		1 << S6_GMAC_FIFOCONF5_RXDROPSIZE,
-		pd->reg + S6_GMAC_FIFOCONF5);
-	writel(1 << S6_GMAC_FIFOCONF_RSV_RUNT |
-		1 << S6_GMAC_FIFOCONF_RSV_CRCERR |
-		1 << S6_GMAC_FIFOCONF_RSV_DRIBBLE |
-		1 << S6_GMAC_FIFOCONF_RSV_CTRLFRAME |
-		1 << S6_GMAC_FIFOCONF_RSV_PAUSECTRL |
-		1 << S6_GMAC_FIFOCONF_RSV_UNOPCODE |
-		1 << S6_GMAC_FIFOCONF_RSV_TRUNCATED,
-		pd->reg + S6_GMAC_FIFOCONF4);
-	s6gmac_set_dstaddr(pd, 0,
-		0xFFFFFFFF, 0x0000FFFF, 0xFFFFFFFF, 0x0000FFFF);
-	s6gmac_set_dstaddr(pd, 1,
-		dev->dev_addr[5] |
-		dev->dev_addr[4] << 8 |
-		dev->dev_addr[3] << 16 |
-		dev->dev_addr[2] << 24,
-		dev->dev_addr[1] |
-		dev->dev_addr[0] << 8,
-		0xFFFFFFFF, 0x0000FFFF);
-	s6gmac_set_dstaddr(pd, 2,
-		0x00000000, 0x00000100, 0x00000000, 0x00000100);
-	s6gmac_set_dstaddr(pd, 3,
-		0x00000000, 0x00000000, 0x00000000, 0x00000000);
-	writel(1 << S6_GMAC_HOST_PBLKCTRL_TXENA |
-		1 << S6_GMAC_HOST_PBLKCTRL_RXENA |
-		S6_GMAC_HOST_PBLKCTRL_SIZ_128 << S6_GMAC_HOST_PBLKCTRL_TXBSIZ |
-		S6_GMAC_HOST_PBLKCTRL_SIZ_128 << S6_GMAC_HOST_PBLKCTRL_RXBSIZ |
-		1 << S6_GMAC_HOST_PBLKCTRL_STATENA |
-		1 << S6_GMAC_HOST_PBLKCTRL_STATCLEAR |
-		is_rgmii << S6_GMAC_HOST_PBLKCTRL_RGMII,
-		pd->reg + S6_GMAC_HOST_PBLKCTRL);
-}
-
-static void s6mii_enable(struct s6gmac *pd)
-{
-	writel(readl(pd->reg + S6_GMAC_MACCONF1) &
-		~(1 << S6_GMAC_MACCONF1_SOFTRES),
-		pd->reg + S6_GMAC_MACCONF1);
-	writel((readl(pd->reg + S6_GMAC_MACMIICONF)
-		& ~(S6_GMAC_MACMIICONF_CSEL_MASK << S6_GMAC_MACMIICONF_CSEL))
-		| (S6_GMAC_MACMIICONF_CSEL_DIV168 << S6_GMAC_MACMIICONF_CSEL),
-		pd->reg + S6_GMAC_MACMIICONF);
-}
-
-static int s6mii_busy(struct s6gmac *pd, int tmo)
-{
-	while (readl(pd->reg + S6_GMAC_MACMIIINDI)) {
-		if (--tmo == 0)
-			return -ETIME;
-		udelay(64);
-	}
-	return 0;
-}
-
-static int s6mii_read(struct mii_bus *bus, int phy_addr, int regnum)
-{
-	struct s6gmac *pd = bus->priv;
-	s6mii_enable(pd);
-	if (s6mii_busy(pd, 256))
-		return -ETIME;
-	writel(phy_addr << S6_GMAC_MACMIIADDR_PHY |
-		regnum << S6_GMAC_MACMIIADDR_REG,
-		pd->reg + S6_GMAC_MACMIIADDR);
-	writel(1 << S6_GMAC_MACMIICMD_READ, pd->reg + S6_GMAC_MACMIICMD);
-	writel(0, pd->reg + S6_GMAC_MACMIICMD);
-	if (s6mii_busy(pd, 256))
-		return -ETIME;
-	return (u16)readl(pd->reg + S6_GMAC_MACMIISTAT);
-}
-
-static int s6mii_write(struct mii_bus *bus, int phy_addr, int regnum, u16 value)
-{
-	struct s6gmac *pd = bus->priv;
-	s6mii_enable(pd);
-	if (s6mii_busy(pd, 256))
-		return -ETIME;
-	writel(phy_addr << S6_GMAC_MACMIIADDR_PHY |
-		regnum << S6_GMAC_MACMIIADDR_REG,
-		pd->reg + S6_GMAC_MACMIIADDR);
-	writel(value, pd->reg + S6_GMAC_MACMIICTRL);
-	if (s6mii_busy(pd, 256))
-		return -ETIME;
-	return 0;
-}
-
-static int s6mii_reset(struct mii_bus *bus)
-{
-	struct s6gmac *pd = bus->priv;
-	s6mii_enable(pd);
-	if (s6mii_busy(pd, PHY_INIT_TIMEOUT))
-		return -ETIME;
-	return 0;
-}
-
-static void s6gmac_set_rgmii_txclock(struct s6gmac *pd)
-{
-	u32 pllsel = readl(S6_REG_GREG1 + S6_GREG1_PLLSEL);
-	pllsel &= ~(S6_GREG1_PLLSEL_GMAC_MASK << S6_GREG1_PLLSEL_GMAC);
-	switch (pd->link.mbit) {
-	case 10:
-		pllsel |= S6_GREG1_PLLSEL_GMAC_2500KHZ << S6_GREG1_PLLSEL_GMAC;
-		break;
-	case 100:
-		pllsel |= S6_GREG1_PLLSEL_GMAC_25MHZ << S6_GREG1_PLLSEL_GMAC;
-		break;
-	case 1000:
-		pllsel |= S6_GREG1_PLLSEL_GMAC_125MHZ << S6_GREG1_PLLSEL_GMAC;
-		break;
-	default:
-		return;
-	}
-	writel(pllsel, S6_REG_GREG1 + S6_GREG1_PLLSEL);
-}
-
-static inline void s6gmac_linkisup(struct net_device *dev, int isup)
-{
-	struct s6gmac *pd = netdev_priv(dev);
-	struct phy_device *phydev = pd->phydev;
-
-	pd->link.full = phydev->duplex;
-	pd->link.giga = (phydev->speed == 1000);
-	if (pd->link.mbit != phydev->speed) {
-		pd->link.mbit = phydev->speed;
-		s6gmac_set_rgmii_txclock(pd);
-	}
-	pd->link.isup = isup;
-	if (isup)
-		netif_carrier_on(dev);
-	phy_print_status(phydev);
-}
-
-static void s6gmac_adjust_link(struct net_device *dev)
-{
-	struct s6gmac *pd = netdev_priv(dev);
-	struct phy_device *phydev = pd->phydev;
-	if (pd->link.isup &&
-			(!phydev->link ||
-			(pd->link.mbit != phydev->speed) ||
-			(pd->link.full != phydev->duplex))) {
-		pd->link.isup = 0;
-		netif_tx_disable(dev);
-		if (!phydev->link) {
-			netif_carrier_off(dev);
-			phy_print_status(phydev);
-		}
-	}
-	if (!pd->link.isup && phydev->link) {
-		if (pd->link.full != phydev->duplex) {
-			u32 maccfg = readl(pd->reg + S6_GMAC_MACCONF2);
-			if (phydev->duplex)
-				maccfg |= 1 << S6_GMAC_MACCONF2_FULL;
-			else
-				maccfg &= ~(1 << S6_GMAC_MACCONF2_FULL);
-			writel(maccfg, pd->reg + S6_GMAC_MACCONF2);
-		}
-
-		if (pd->link.giga != (phydev->speed == 1000)) {
-			u32 fifocfg = readl(pd->reg + S6_GMAC_FIFOCONF5);
-			u32 maccfg = readl(pd->reg + S6_GMAC_MACCONF2);
-			maccfg &= ~(S6_GMAC_MACCONF2_IFMODE_MASK
-				     << S6_GMAC_MACCONF2_IFMODE);
-			if (phydev->speed == 1000) {
-				fifocfg |= 1 << S6_GMAC_FIFOCONF5_CFGBYTM;
-				maccfg |= S6_GMAC_MACCONF2_IFMODE_BYTE
-					   << S6_GMAC_MACCONF2_IFMODE;
-			} else {
-				fifocfg &= ~(1 << S6_GMAC_FIFOCONF5_CFGBYTM);
-				maccfg |= S6_GMAC_MACCONF2_IFMODE_NIBBLE
-					   << S6_GMAC_MACCONF2_IFMODE;
-			}
-			writel(fifocfg, pd->reg + S6_GMAC_FIFOCONF5);
-			writel(maccfg, pd->reg + S6_GMAC_MACCONF2);
-		}
-
-		if (!s6dmac_fifo_full(pd->tx_dma, pd->tx_chan))
-			netif_wake_queue(dev);
-		s6gmac_linkisup(dev, 1);
-	}
-}
-
-static inline int s6gmac_phy_start(struct net_device *dev)
-{
-	struct s6gmac *pd = netdev_priv(dev);
-	int i = 0;
-	struct phy_device *p = NULL;
-	while ((i < PHY_MAX_ADDR) && (!(p = pd->mii.bus->phy_map[i])))
-		i++;
-	p = phy_connect(dev, dev_name(&p->dev), &s6gmac_adjust_link,
-			PHY_INTERFACE_MODE_RGMII);
-	if (IS_ERR(p)) {
-		printk(KERN_ERR "%s: Could not attach to PHY\n", dev->name);
-		return PTR_ERR(p);
-	}
-	p->supported &= PHY_GBIT_FEATURES;
-	p->advertising = p->supported;
-	pd->phydev = p;
-	return 0;
-}
-
-static inline void s6gmac_init_stats(struct net_device *dev)
-{
-	struct s6gmac *pd = netdev_priv(dev);
-	u32 mask;
-	mask =	1 << S6_GMAC_STATCARRY1_RDRP |
-		1 << S6_GMAC_STATCARRY1_RJBR |
-		1 << S6_GMAC_STATCARRY1_RFRG |
-		1 << S6_GMAC_STATCARRY1_ROVR |
-		1 << S6_GMAC_STATCARRY1_RUND |
-		1 << S6_GMAC_STATCARRY1_RCDE |
-		1 << S6_GMAC_STATCARRY1_RFLR |
-		1 << S6_GMAC_STATCARRY1_RALN |
-		1 << S6_GMAC_STATCARRY1_RMCA |
-		1 << S6_GMAC_STATCARRY1_RFCS |
-		1 << S6_GMAC_STATCARRY1_RPKT |
-		1 << S6_GMAC_STATCARRY1_RBYT;
-	writel(mask, pd->reg + S6_GMAC_STATCARRY(0));
-	writel(~mask, pd->reg + S6_GMAC_STATCARRYMSK(0));
-	mask =	1 << S6_GMAC_STATCARRY2_TDRP |
-		1 << S6_GMAC_STATCARRY2_TNCL |
-		1 << S6_GMAC_STATCARRY2_TXCL |
-		1 << S6_GMAC_STATCARRY2_TEDF |
-		1 << S6_GMAC_STATCARRY2_TPKT |
-		1 << S6_GMAC_STATCARRY2_TBYT |
-		1 << S6_GMAC_STATCARRY2_TFRG |
-		1 << S6_GMAC_STATCARRY2_TUND |
-		1 << S6_GMAC_STATCARRY2_TOVR |
-		1 << S6_GMAC_STATCARRY2_TFCS |
-		1 << S6_GMAC_STATCARRY2_TJBR;
-	writel(mask, pd->reg + S6_GMAC_STATCARRY(1));
-	writel(~mask, pd->reg + S6_GMAC_STATCARRYMSK(1));
-}
-
-static inline void s6gmac_init_dmac(struct net_device *dev)
-{
-	struct s6gmac *pd = netdev_priv(dev);
-	s6dmac_disable_chan(pd->tx_dma, pd->tx_chan);
-	s6dmac_disable_chan(pd->rx_dma, pd->rx_chan);
-	s6dmac_disable_error_irqs(pd->tx_dma, 1 << S6_HIFDMA_GMACTX);
-	s6dmac_disable_error_irqs(pd->rx_dma, 1 << S6_HIFDMA_GMACRX);
-}
-
-static int s6gmac_tx(struct sk_buff *skb, struct net_device *dev)
-{
-	struct s6gmac *pd = netdev_priv(dev);
-	unsigned long flags;
-
-	spin_lock_irqsave(&pd->lock, flags);
-	writel(skb->len << S6_GMAC_BURST_PREWR_LEN |
-		0 << S6_GMAC_BURST_PREWR_CFE |
-		1 << S6_GMAC_BURST_PREWR_PPE |
-		1 << S6_GMAC_BURST_PREWR_FCS |
-		((skb->len < ETH_ZLEN) ? 1 : 0) << S6_GMAC_BURST_PREWR_PAD,
-		pd->reg + S6_GMAC_BURST_PREWR);
-	s6dmac_put_fifo_cache(pd->tx_dma, pd->tx_chan,
-		(u32)skb->data, pd->io, skb->len);
-	if (s6dmac_fifo_full(pd->tx_dma, pd->tx_chan))
-		netif_stop_queue(dev);
-	if (((u8)(pd->tx_skb_i - pd->tx_skb_o)) >= S6_NUM_TX_SKB) {
-		printk(KERN_ERR "GMAC BUG: skb tx ring overflow [%x, %x]\n",
-			pd->tx_skb_o, pd->tx_skb_i);
-		BUG();
-	}
-	pd->tx_skb[(pd->tx_skb_i++) % S6_NUM_TX_SKB] = skb;
-	spin_unlock_irqrestore(&pd->lock, flags);
-	return 0;
-}
-
-static void s6gmac_tx_timeout(struct net_device *dev)
-{
-	struct s6gmac *pd = netdev_priv(dev);
-	unsigned long flags;
-	spin_lock_irqsave(&pd->lock, flags);
-	s6gmac_tx_interrupt(dev);
-	spin_unlock_irqrestore(&pd->lock, flags);
-}
-
-static int s6gmac_open(struct net_device *dev)
-{
-	struct s6gmac *pd = netdev_priv(dev);
-	unsigned long flags;
-	phy_read_status(pd->phydev);
-	spin_lock_irqsave(&pd->lock, flags);
-	pd->link.mbit = 0;
-	s6gmac_linkisup(dev, pd->phydev->link);
-	s6gmac_init_device(dev);
-	s6gmac_init_stats(dev);
-	s6gmac_init_dmac(dev);
-	s6gmac_rx_fillfifo(dev);
-	s6dmac_enable_chan(pd->rx_dma, pd->rx_chan,
-		2, 1, 0, 1, 0, 0, 0, 7, -1, 2, 0, 1);
-	s6dmac_enable_chan(pd->tx_dma, pd->tx_chan,
-		2, 0, 1, 0, 0, 0, 0, 7, -1, 2, 0, 1);
-	writel(0 << S6_GMAC_HOST_INT_TXBURSTOVER |
-		0 << S6_GMAC_HOST_INT_TXPREWOVER |
-		0 << S6_GMAC_HOST_INT_RXBURSTUNDER |
-		0 << S6_GMAC_HOST_INT_RXPOSTRFULL |
-		0 << S6_GMAC_HOST_INT_RXPOSTRUNDER,
-		pd->reg + S6_GMAC_HOST_INTMASK);
-	spin_unlock_irqrestore(&pd->lock, flags);
-	phy_start(pd->phydev);
-	netif_start_queue(dev);
-	return 0;
-}
-
-static int s6gmac_stop(struct net_device *dev)
-{
-	struct s6gmac *pd = netdev_priv(dev);
-	unsigned long flags;
-	netif_stop_queue(dev);
-	phy_stop(pd->phydev);
-	spin_lock_irqsave(&pd->lock, flags);
-	s6gmac_init_dmac(dev);
-	s6gmac_stop_device(dev);
-	while (pd->tx_skb_i != pd->tx_skb_o)
-		dev_kfree_skb(pd->tx_skb[(pd->tx_skb_o++) % S6_NUM_TX_SKB]);
-	while (pd->rx_skb_i != pd->rx_skb_o)
-		dev_kfree_skb(pd->rx_skb[(pd->rx_skb_o++) % S6_NUM_RX_SKB]);
-	spin_unlock_irqrestore(&pd->lock, flags);
-	return 0;
-}
-
-static struct net_device_stats *s6gmac_stats(struct net_device *dev)
-{
-	struct s6gmac *pd = netdev_priv(dev);
-	struct net_device_stats *st = (struct net_device_stats *)&pd->stats;
-	int i;
-	do {
-		unsigned long flags;
-		spin_lock_irqsave(&pd->lock, flags);
-		for (i = 0; i < ARRAY_SIZE(pd->stats); i++)
-			pd->stats[i] =
-				pd->carry[i] << (S6_GMAC_STAT_SIZE_MIN - 1);
-		s6gmac_stats_collect(pd, &statinf[0][0]);
-		s6gmac_stats_collect(pd, &statinf[1][0]);
-		i = s6gmac_stats_pending(pd, 0) |
-			s6gmac_stats_pending(pd, 1);
-		spin_unlock_irqrestore(&pd->lock, flags);
-	} while (i);
-	st->rx_errors = st->rx_crc_errors +
-			st->rx_frame_errors +
-			st->rx_length_errors +
-			st->rx_missed_errors;
-	st->tx_errors += st->tx_aborted_errors;
-	return st;
-}
-
-static int s6gmac_probe(struct platform_device *pdev)
-{
-	struct net_device *dev;
-	struct s6gmac *pd;
-	int res;
-	unsigned long i;
-	struct mii_bus *mb;
-
-	dev = alloc_etherdev(sizeof(*pd));
-	if (!dev)
-		return -ENOMEM;
-
-	dev->open = s6gmac_open;
-	dev->stop = s6gmac_stop;
-	dev->hard_start_xmit = s6gmac_tx;
-	dev->tx_timeout = s6gmac_tx_timeout;
-	dev->watchdog_timeo = HZ;
-	dev->get_stats = s6gmac_stats;
-	dev->irq = platform_get_irq(pdev, 0);
-	pd = netdev_priv(dev);
-	memset(pd, 0, sizeof(*pd));
-	spin_lock_init(&pd->lock);
-	pd->reg = platform_get_resource(pdev, IORESOURCE_MEM, 0)->start;
-	i = platform_get_resource(pdev, IORESOURCE_DMA, 0)->start;
-	pd->tx_dma = DMA_MASK_DMAC(i);
-	pd->tx_chan = DMA_INDEX_CHNL(i);
-	i = platform_get_resource(pdev, IORESOURCE_DMA, 1)->start;
-	pd->rx_dma = DMA_MASK_DMAC(i);
-	pd->rx_chan = DMA_INDEX_CHNL(i);
-	pd->io = platform_get_resource(pdev, IORESOURCE_IO, 0)->start;
-	res = request_irq(dev->irq, s6gmac_interrupt, 0, dev->name, dev);
-	if (res) {
-		printk(KERN_ERR DRV_PRMT "irq request failed: %d\n", dev->irq);
-		goto errirq;
-	}
-	res = register_netdev(dev);
-	if (res) {
-		printk(KERN_ERR DRV_PRMT "error registering device %s\n",
-			dev->name);
-		goto errdev;
-	}
-	mb = mdiobus_alloc();
-	if (!mb) {
-		printk(KERN_ERR DRV_PRMT "error allocating mii bus\n");
-		res = -ENOMEM;
-		goto errmii;
-	}
-	mb->name = "s6gmac_mii";
-	mb->read = s6mii_read;
-	mb->write = s6mii_write;
-	mb->reset = s6mii_reset;
-	mb->priv = pd;
-	snprintf(mb->id, MII_BUS_ID_SIZE, "%s-%x", pdev->name, pdev->id);
-	mb->phy_mask = ~(1 << 0);
-	mb->irq = &pd->mii.irq[0];
-	for (i = 0; i < PHY_MAX_ADDR; i++) {
-		int n = platform_get_irq(pdev, i + 1);
-		if (n < 0)
-			n = PHY_POLL;
-		pd->mii.irq[i] = n;
-	}
-	mdiobus_register(mb);
-	pd->mii.bus = mb;
-	res = s6gmac_phy_start(dev);
-	if (res)
-		return res;
-	platform_set_drvdata(pdev, dev);
-	return 0;
-errmii:
-	unregister_netdev(dev);
-errdev:
-	free_irq(dev->irq, dev);
-errirq:
-	free_netdev(dev);
-	return res;
-}
-
-static int s6gmac_remove(struct platform_device *pdev)
-{
-	struct net_device *dev = platform_get_drvdata(pdev);
-	if (dev) {
-		struct s6gmac *pd = netdev_priv(dev);
-		mdiobus_unregister(pd->mii.bus);
-		unregister_netdev(dev);
-		free_irq(dev->irq, dev);
-		free_netdev(dev);
-	}
-	return 0;
-}
-
-static struct platform_driver s6gmac_driver = {
-	.probe = s6gmac_probe,
-	.remove = s6gmac_remove,
-	.driver = {
-		.name = "s6gmac",
-	},
-};
-
-module_platform_driver(s6gmac_driver);
-
-MODULE_LICENSE("GPL");
-MODULE_DESCRIPTION("S6105 on chip Ethernet driver");
-MODULE_AUTHOR("Oskar Schirmer <oskar@scara.com>");

drivers/net/ethernet/stmicro/stmmac/stmmac_main.c

@@ -1671,7 +1671,7 @@ static void stmmac_init_tx_coalesce(struct stmmac_priv *priv)
  *  0 on success and an appropriate (-)ve integer as defined in errno.h
  *  file on failure.
  */
-static int stmmac_hw_setup(struct net_device *dev)
+static int stmmac_hw_setup(struct net_device *dev, bool init_ptp)
 {
 	struct stmmac_priv *priv = netdev_priv(dev);
 	int ret;
@@ -1708,9 +1708,11 @@ static int stmmac_hw_setup(struct net_device *dev)
 
 	stmmac_mmc_setup(priv);
 
-	ret = stmmac_init_ptp(priv);
-	if (ret && ret != -EOPNOTSUPP)
-		pr_warn("%s: failed PTP initialisation\n", __func__);
+	if (init_ptp) {
+		ret = stmmac_init_ptp(priv);
+		if (ret && ret != -EOPNOTSUPP)
+			pr_warn("%s: failed PTP initialisation\n", __func__);
+	}
 
 #ifdef CONFIG_DEBUG_FS
 	ret = stmmac_init_fs(dev);
@@ -1787,7 +1789,7 @@ static int stmmac_open(struct net_device *dev)
 		goto init_error;
 	}
 
-	ret = stmmac_hw_setup(dev);
+	ret = stmmac_hw_setup(dev, true);
 	if (ret < 0) {
 		pr_err("%s: Hw setup failed\n", __func__);
 		goto init_error;
@@ -3036,7 +3038,7 @@ int stmmac_resume(struct net_device *ndev)
 	netif_device_attach(ndev);
 
 	init_dma_desc_rings(ndev, GFP_ATOMIC);
-	stmmac_hw_setup(ndev);
+	stmmac_hw_setup(ndev, false);
 	stmmac_init_tx_coalesce(priv);
 
 	napi_enable(&priv->napi);

drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c

@@ -430,7 +430,6 @@ static struct platform_driver stmmac_pltfr_driver = {
 	.remove = stmmac_pltfr_remove,
 	.driver = {
 		   .name = STMMAC_RESOURCE_NAME,
-		   .owner = THIS_MODULE,
 		   .pm = &stmmac_pltfr_pm_ops,
 		   .of_match_table = of_match_ptr(stmmac_dt_ids),
 	},

drivers/net/ethernet/sun/sunvnet.c

@@ -1201,6 +1201,7 @@ static int vnet_handle_offloads(struct vnet_port *port, struct sk_buff *skb)
 		segs = skb_gso_segment(skb, dev->features & ~NETIF_F_TSO);
 	if (IS_ERR(segs)) {
 		dev->stats.tx_dropped++;
+		dev_kfree_skb_any(skb);
 		return NETDEV_TX_OK;
 	}
 

drivers/net/ethernet/xilinx/xilinx_axienet.h

@@ -388,7 +388,6 @@ struct axidma_bd {
  * @dma_err_tasklet: Tasklet structure to process Axi DMA errors
  * @tx_irq:	Axidma TX IRQ number
  * @rx_irq:	Axidma RX IRQ number
- * @temac_type:	axienet type to identify between soft and hard temac
  * @phy_type:	Phy type to identify between MII/GMII/RGMII/SGMII/1000 Base-X
  * @options:	AxiEthernet option word
  * @last_link:	Phy link state in which the PHY was negotiated earlier
@@ -431,7 +430,6 @@ struct axienet_local {
 
 	int tx_irq;
 	int rx_irq;
-	u32 temac_type;
 	u32 phy_type;
 
 	u32 options;			/* Current options word */

drivers/net/ethernet/xilinx/xilinx_axienet_main.c

@@ -1555,10 +1555,6 @@ static int axienet_of_probe(struct platform_device *op)
 		if ((be32_to_cpup(p)) >= 0x4000)
 			lp->jumbo_support = 1;
 	}
-	p = (__be32 *) of_get_property(op->dev.of_node, "xlnx,temac-type",
-				       NULL);
-	if (p)
-		lp->temac_type = be32_to_cpup(p);
 	p = (__be32 *) of_get_property(op->dev.of_node, "xlnx,phy-type", NULL);
 	if (p)
 		lp->phy_type = be32_to_cpup(p);

drivers/net/hyperv/hyperv_net.h

@@ -590,6 +590,7 @@ struct nvsp_message {
 
 
 #define NETVSC_RECEIVE_BUFFER_ID		0xcafe
+#define NETVSC_SEND_BUFFER_ID			0
 
 #define NETVSC_PACKET_SIZE                      4096
 

drivers/net/hyperv/netvsc.c

@@ -161,8 +161,8 @@ static int netvsc_destroy_buf(struct netvsc_device *net_device)
 
 	/* Deal with the send buffer we may have setup.
 	 * If we got a  send section size, it means we received a
-	 * SendsendBufferComplete msg (ie sent
-	 * NvspMessage1TypeSendReceiveBuffer msg) therefore, we need
+	 * NVSP_MSG1_TYPE_SEND_SEND_BUF_COMPLETE msg (ie sent
+	 * NVSP_MSG1_TYPE_SEND_SEND_BUF msg) therefore, we need
 	 * to send a revoke msg here
 	 */
 	if (net_device->send_section_size) {
@@ -172,7 +172,8 @@ static int netvsc_destroy_buf(struct netvsc_device *net_device)
 
 		revoke_packet->hdr.msg_type =
 			NVSP_MSG1_TYPE_REVOKE_SEND_BUF;
-		revoke_packet->msg.v1_msg.revoke_recv_buf.id = 0;
+		revoke_packet->msg.v1_msg.revoke_send_buf.id =
+			NETVSC_SEND_BUFFER_ID;
 
 		ret = vmbus_sendpacket(net_device->dev->channel,
 				       revoke_packet,
@@ -204,7 +205,7 @@ static int netvsc_destroy_buf(struct netvsc_device *net_device)
 		net_device->send_buf_gpadl_handle = 0;
 	}
 	if (net_device->send_buf) {
-		/* Free up the receive buffer */
+		/* Free up the send buffer */
 		vfree(net_device->send_buf);
 		net_device->send_buf = NULL;
 	}
@@ -339,9 +340,9 @@ static int netvsc_init_buf(struct hv_device *device)
 	init_packet = &net_device->channel_init_pkt;
 	memset(init_packet, 0, sizeof(struct nvsp_message));
 	init_packet->hdr.msg_type = NVSP_MSG1_TYPE_SEND_SEND_BUF;
-	init_packet->msg.v1_msg.send_recv_buf.gpadl_handle =
+	init_packet->msg.v1_msg.send_send_buf.gpadl_handle =
 		net_device->send_buf_gpadl_handle;
-	init_packet->msg.v1_msg.send_recv_buf.id = 0;
+	init_packet->msg.v1_msg.send_send_buf.id = NETVSC_SEND_BUFFER_ID;
 
 	/* Send the gpadl notification request */
 	ret = vmbus_sendpacket(device->channel, init_packet,
@@ -364,7 +365,7 @@ static int netvsc_init_buf(struct hv_device *device)
 		netdev_err(ndev, "Unable to complete send buffer "
 			   "initialization with NetVsp - status %d\n",
 			   init_packet->msg.v1_msg.
-			   send_recv_buf_complete.status);
+			   send_send_buf_complete.status);
 		ret = -EINVAL;
 		goto cleanup;
 	}

drivers/net/phy/micrel.c

@@ -88,6 +88,7 @@ struct kszphy_priv {
 
 static const struct kszphy_type ksz8021_type = {
 	.led_mode_reg		= MII_KSZPHY_CTRL_2,
+	.has_broadcast_disable	= true,
 	.has_rmii_ref_clk_sel	= true,
 };
 
@@ -258,19 +259,6 @@ static int kszphy_config_init(struct phy_device *phydev)
 	return 0;
 }
 
-static int ksz8021_config_init(struct phy_device *phydev)
-{
-	int rc;
-
-	rc = kszphy_config_init(phydev);
-	if (rc)
-		return rc;
-
-	rc = kszphy_broadcast_disable(phydev);
-
-	return rc < 0 ? rc : 0;
-}
-
 static int ksz9021_load_values_from_of(struct phy_device *phydev,
 				       struct device_node *of_node, u16 reg,
 				       char *field1, char *field2,
@@ -584,7 +572,7 @@ static struct phy_driver ksphy_driver[] = {
 	.flags		= PHY_HAS_MAGICANEG | PHY_HAS_INTERRUPT,
 	.driver_data	= &ksz8021_type,
 	.probe		= kszphy_probe,
-	.config_init	= ksz8021_config_init,
+	.config_init	= kszphy_config_init,
 	.config_aneg	= genphy_config_aneg,
 	.read_status	= genphy_read_status,
 	.ack_interrupt	= kszphy_ack_interrupt,
@@ -601,7 +589,7 @@ static struct phy_driver ksphy_driver[] = {
 	.flags		= PHY_HAS_MAGICANEG | PHY_HAS_INTERRUPT,
 	.driver_data	= &ksz8021_type,
 	.probe		= kszphy_probe,
-	.config_init	= ksz8021_config_init,
+	.config_init	= kszphy_config_init,
 	.config_aneg	= genphy_config_aneg,
 	.read_status	= genphy_read_status,
 	.ack_interrupt	= kszphy_ack_interrupt,

drivers/net/virtio_net.c

@@ -760,7 +760,6 @@ static int virtnet_poll(struct napi_struct *napi, int budget)
 		container_of(napi, struct receive_queue, napi);
 	unsigned int r, received = 0;
 
-again:
 	received += virtnet_receive(rq, budget - received);
 
 	/* Out of packets? */
@@ -771,7 +770,6 @@ again:
 		    napi_schedule_prep(napi)) {
 			virtqueue_disable_cb(rq->vq);
 			__napi_schedule(napi);
-			goto again;
 		}
 	}
 

drivers/net/vxlan.c

@@ -1579,8 +1579,10 @@ static int vxlan6_xmit_skb(struct vxlan_sock *vs,
 	bool udp_sum = !udp_get_no_check6_tx(vs->sock->sk);
 
 	skb = udp_tunnel_handle_offloads(skb, udp_sum);
-	if (IS_ERR(skb))
-		return -EINVAL;
+	if (IS_ERR(skb)) {
+		err = -EINVAL;
+		goto err;
+	}
 
 	skb_scrub_packet(skb, xnet);
 
@@ -1590,12 +1592,16 @@ static int vxlan6_xmit_skb(struct vxlan_sock *vs,
 
 	/* Need space for new headers (invalidates iph ptr) */
 	err = skb_cow_head(skb, min_headroom);
-	if (unlikely(err))
-		return err;
+	if (unlikely(err)) {
+		kfree_skb(skb);
+		goto err;
+	}
 
 	skb = vlan_hwaccel_push_inside(skb);
-	if (WARN_ON(!skb))
-		return -ENOMEM;
+	if (WARN_ON(!skb)) {
+		err = -ENOMEM;
+		goto err;
+	}
 
 	vxh = (struct vxlanhdr *) __skb_push(skb, sizeof(*vxh));
 	vxh->vx_flags = htonl(VXLAN_FLAGS);
@@ -1606,6 +1612,9 @@ static int vxlan6_xmit_skb(struct vxlan_sock *vs,
 	udp_tunnel6_xmit_skb(vs->sock, dst, skb, dev, saddr, daddr, prio,
 			     ttl, src_port, dst_port);
 	return 0;
+err:
+	dst_release(dst);
+	return err;
 }
 #endif
 
@@ -1621,7 +1630,7 @@ int vxlan_xmit_skb(struct vxlan_sock *vs,
 
 	skb = udp_tunnel_handle_offloads(skb, udp_sum);
 	if (IS_ERR(skb))
-		return -EINVAL;
+		return PTR_ERR(skb);
 
 	min_headroom = LL_RESERVED_SPACE(rt->dst.dev) + rt->dst.header_len
 			+ VXLAN_HLEN + sizeof(struct iphdr)
@@ -1629,8 +1638,10 @@ int vxlan_xmit_skb(struct vxlan_sock *vs,
 
 	/* Need space for new headers (invalidates iph ptr) */
 	err = skb_cow_head(skb, min_headroom);
-	if (unlikely(err))
+	if (unlikely(err)) {
+		kfree_skb(skb);
 		return err;
+	}
 
 	skb = vlan_hwaccel_push_inside(skb);
 	if (WARN_ON(!skb))
@@ -1776,9 +1787,12 @@ static void vxlan_xmit_one(struct sk_buff *skb, struct net_device *dev,
 				     tos, ttl, df, src_port, dst_port,
 				     htonl(vni << 8),
 				     !net_eq(vxlan->net, dev_net(vxlan->dev)));
-
-		if (err < 0)
+		if (err < 0) {
+			/* skb is already freed. */
+			skb = NULL;
 			goto rt_tx_error;
+		}
+
 		iptunnel_xmit_stats(err, &dev->stats, dev->tstats);
 #if IS_ENABLED(CONFIG_IPV6)
 	} else {

drivers/net/wireless/brcm80211/brcmfmac/bcmsdh.c

@@ -1070,7 +1070,7 @@ static int brcmf_ops_sdio_probe(struct sdio_func *func,
 	 */
 	if ((sdio_get_host_pm_caps(sdiodev->func[1]) & MMC_PM_KEEP_POWER) &&
 	    ((sdio_get_host_pm_caps(sdiodev->func[1]) & MMC_PM_WAKE_SDIO_IRQ) ||
-	     (sdiodev->pdata->oob_irq_supported)))
+	     (sdiodev->pdata && sdiodev->pdata->oob_irq_supported)))
 		bus_if->wowl_supported = true;
 #endif
 
@@ -1167,7 +1167,7 @@ static int brcmf_ops_sdio_resume(struct device *dev)
 	struct brcmf_sdio_dev *sdiodev = bus_if->bus_priv.sdio;
 
 	brcmf_dbg(SDIO, "Enter\n");
-	if (sdiodev->pdata->oob_irq_supported)
+	if (sdiodev->pdata && sdiodev->pdata->oob_irq_supported)
 		disable_irq_wake(sdiodev->pdata->oob_irq_nr);
 	brcmf_sdio_wd_timer(sdiodev->bus, BRCMF_WD_POLL_MS);
 	atomic_set(&sdiodev->suspend, false);

drivers/net/wireless/ipw2x00/Kconfig

@@ -65,7 +65,8 @@ config IPW2100_DEBUG
 
 config IPW2200
 	tristate "Intel PRO/Wireless 2200BG and 2915ABG Network Connection"
-	depends on PCI && CFG80211 && CFG80211_WEXT
+	depends on PCI && CFG80211
+	select CFG80211_WEXT
 	select WIRELESS_EXT
 	select WEXT_SPY
 	select WEXT_PRIV

drivers/net/wireless/iwlwifi/iwl-drv.c

@@ -1323,10 +1323,10 @@ static void iwl_req_fw_callback(const struct firmware *ucode_raw, void *context)
 
  try_again:
 	/* try next, if any */
-	kfree(pieces);
 	release_firmware(ucode_raw);
 	if (iwl_request_firmware(drv, false))
 		goto out_unbind;
+	kfree(pieces);
 	return;
 
  out_free_fw:

drivers/net/wireless/iwlwifi/iwl-fh.h

@@ -310,6 +310,7 @@ static inline unsigned int FH_MEM_CBBC_QUEUE(unsigned int chnl)
 #define FH_RSSR_CHNL0_RX_STATUS_CHNL_IDLE	(0x01000000)
 
 #define FH_MEM_TFDIB_REG1_ADDR_BITSHIFT	28
+#define FH_MEM_TB_MAX_LENGTH			(0x00020000)
 
 /* TFDB  Area - TFDs buffer table */
 #define FH_MEM_TFDIB_DRAM_ADDR_LSB_MSK      (0xFFFFFFFF)

drivers/net/wireless/iwlwifi/mvm/mac80211.c

@@ -1004,8 +1004,13 @@ void __iwl_mvm_mac_stop(struct iwl_mvm *mvm)
 {
 	lockdep_assert_held(&mvm->mutex);
 
-	/* disallow low power states when the FW is down */
-	iwl_mvm_ref(mvm, IWL_MVM_REF_UCODE_DOWN);
+	/*
+	 * Disallow low power states when the FW is down by taking
+	 * the UCODE_DOWN ref. in case of ongoing hw restart the
+	 * ref is already taken, so don't take it again.
+	 */
+	if (!test_bit(IWL_MVM_STATUS_IN_HW_RESTART, &mvm->status))
+		iwl_mvm_ref(mvm, IWL_MVM_REF_UCODE_DOWN);
 
 	/* async_handlers_wk is now blocked */
 
@@ -1023,6 +1028,12 @@ void __iwl_mvm_mac_stop(struct iwl_mvm *mvm)
 	/* the fw is stopped, the aux sta is dead: clean up driver state */
 	iwl_mvm_del_aux_sta(mvm);
 
+	/*
+	 * Clear IN_HW_RESTART flag when stopping the hw (as restart_complete()
+	 * won't be called in this case).
+	 */
+	clear_bit(IWL_MVM_STATUS_IN_HW_RESTART, &mvm->status);
+
 	mvm->ucode_loaded = false;
 }
 

drivers/net/wireless/iwlwifi/pcie/drv.c

@@ -367,7 +367,11 @@ static const struct pci_device_id iwl_hw_card_ids[] = {
 
 /* 3165 Series */
 	{IWL_PCI_DEVICE(0x3165, 0x4010, iwl3165_2ac_cfg)},
+	{IWL_PCI_DEVICE(0x3165, 0x4012, iwl3165_2ac_cfg)},
+	{IWL_PCI_DEVICE(0x3165, 0x4110, iwl3165_2ac_cfg)},
 	{IWL_PCI_DEVICE(0x3165, 0x4210, iwl3165_2ac_cfg)},
+	{IWL_PCI_DEVICE(0x3165, 0x4410, iwl3165_2ac_cfg)},
+	{IWL_PCI_DEVICE(0x3165, 0x4510, iwl3165_2ac_cfg)},
 
 /* 7265 Series */
 	{IWL_PCI_DEVICE(0x095A, 0x5010, iwl7265_2ac_cfg)},

drivers/net/wireless/iwlwifi/pcie/trans.c

@@ -614,7 +614,7 @@ static int iwl_pcie_load_section(struct iwl_trans *trans, u8 section_num,
 {
 	u8 *v_addr;
 	dma_addr_t p_addr;
-	u32 offset, chunk_sz = section->len;
+	u32 offset, chunk_sz = min_t(u32, FH_MEM_TB_MAX_LENGTH, section->len);
 	int ret = 0;
 
 	IWL_DEBUG_FW(trans, "[%d] uCode section being loaded...\n",
@@ -1012,16 +1012,21 @@ static void iwl_trans_pcie_stop_device(struct iwl_trans *trans)
 	/* Stop the device, and put it in low power state */
 	iwl_pcie_apm_stop(trans);
 
-	/* Upon stop, the APM issues an interrupt if HW RF kill is set.
-	 * Clean again the interrupt here
+	/* stop and reset the on-board processor */
+	iwl_write32(trans, CSR_RESET, CSR_RESET_REG_FLAG_SW_RESET);
+	udelay(20);
+
+	/*
+	 * Upon stop, the APM issues an interrupt if HW RF kill is set.
+	 * This is a bug in certain verions of the hardware.
+	 * Certain devices also keep sending HW RF kill interrupt all
+	 * the time, unless the interrupt is ACKed even if the interrupt
+	 * should be masked. Re-ACK all the interrupts here.
 	 */
 	spin_lock(&trans_pcie->irq_lock);
 	iwl_disable_interrupts(trans);
 	spin_unlock(&trans_pcie->irq_lock);
 
-	/* stop and reset the on-board processor */
-	iwl_write32(trans, CSR_RESET, CSR_RESET_REG_FLAG_SW_RESET);
-	udelay(20);
 
 	/* clear all status bits */
 	clear_bit(STATUS_SYNC_HCMD_ACTIVE, &trans->status);

drivers/powercap/intel_rapl.c

@@ -1041,6 +1041,7 @@ static const struct x86_cpu_id rapl_ids[] = {
 	RAPL_CPU(0x45, rapl_defaults_core),/* Haswell ULT */
 	RAPL_CPU(0x4C, rapl_defaults_atom),/* Braswell */
 	RAPL_CPU(0x4A, rapl_defaults_atom),/* Tangier */
+	RAPL_CPU(0x56, rapl_defaults_core),/* Future Xeon */
 	RAPL_CPU(0x5A, rapl_defaults_atom),/* Annidale */
 	{}
 };

drivers/regulator/s2mps11.c

@@ -570,7 +570,7 @@ static struct regulator_ops s2mps14_reg_ops = {
 	.enable_mask	= S2MPS14_ENABLE_MASK		\
 }
 
-#define regulator_desc_s2mps14_buck(num, min, step) {		\
+#define regulator_desc_s2mps14_buck(num, min, step, min_sel) {	\
 	.name		= "BUCK"#num,				\
 	.id		= S2MPS14_BUCK##num,			\
 	.ops		= &s2mps14_reg_ops,			\
@@ -579,7 +579,7 @@ static struct regulator_ops s2mps14_reg_ops = {
 	.min_uV		= min,					\
 	.uV_step	= step,					\
 	.n_voltages	= S2MPS14_BUCK_N_VOLTAGES,		\
-	.linear_min_sel = S2MPS14_BUCK1235_START_SEL,		\
+	.linear_min_sel = min_sel,				\
 	.ramp_delay	= S2MPS14_BUCK_RAMP_DELAY,		\
 	.vsel_reg	= S2MPS14_REG_B1CTRL2 + (num - 1) * 2,	\
 	.vsel_mask	= S2MPS14_BUCK_VSEL_MASK,		\
@@ -613,11 +613,16 @@ static const struct regulator_desc s2mps14_regulators[] = {
 	regulator_desc_s2mps14_ldo(23, MIN_800_MV, STEP_25_MV),
 	regulator_desc_s2mps14_ldo(24, MIN_1800_MV, STEP_25_MV),
 	regulator_desc_s2mps14_ldo(25, MIN_1800_MV, STEP_25_MV),
-	regulator_desc_s2mps14_buck(1, MIN_600_MV, STEP_6_25_MV),
-	regulator_desc_s2mps14_buck(2, MIN_600_MV, STEP_6_25_MV),
-	regulator_desc_s2mps14_buck(3, MIN_600_MV, STEP_6_25_MV),
-	regulator_desc_s2mps14_buck(4, MIN_1400_MV, STEP_12_5_MV),
-	regulator_desc_s2mps14_buck(5, MIN_600_MV, STEP_6_25_MV),
+	regulator_desc_s2mps14_buck(1, MIN_600_MV, STEP_6_25_MV,
+				    S2MPS14_BUCK1235_START_SEL),
+	regulator_desc_s2mps14_buck(2, MIN_600_MV, STEP_6_25_MV,
+				    S2MPS14_BUCK1235_START_SEL),
+	regulator_desc_s2mps14_buck(3, MIN_600_MV, STEP_6_25_MV,
+				    S2MPS14_BUCK1235_START_SEL),
+	regulator_desc_s2mps14_buck(4, MIN_1400_MV, STEP_12_5_MV,
+				    S2MPS14_BUCK4_START_SEL),
+	regulator_desc_s2mps14_buck(5, MIN_600_MV, STEP_6_25_MV,
+				    S2MPS14_BUCK1235_START_SEL),
 };
 
 static int s2mps14_pmic_enable_ext_control(struct s2mps11_info *s2mps11,

drivers/scsi/fnic/fnic.h

@@ -39,7 +39,7 @@
 
 #define DRV_NAME		"fnic"
 #define DRV_DESCRIPTION		"Cisco FCoE HBA Driver"
-#define DRV_VERSION		"1.6.0.16"
+#define DRV_VERSION		"1.6.0.17"
 #define PFX			DRV_NAME ": "
 #define DFX                     DRV_NAME "%d: "
 

drivers/scsi/fnic/fnic_scsi.c

@@ -1892,6 +1892,21 @@ int fnic_abort_cmd(struct scsi_cmnd *sc)
 		goto fnic_abort_cmd_end;
 	}
 
+	/* IO out of order */
+
+	if (!(CMD_FLAGS(sc) & (FNIC_IO_ABORTED | FNIC_IO_DONE))) {
+		spin_unlock_irqrestore(io_lock, flags);
+		FNIC_SCSI_DBG(KERN_DEBUG, fnic->lport->host,
+			"Issuing Host reset due to out of order IO\n");
+
+		if (fnic_host_reset(sc) == FAILED) {
+			FNIC_SCSI_DBG(KERN_DEBUG, fnic->lport->host,
+				"fnic_host_reset failed.\n");
+		}
+		ret = FAILED;
+		goto fnic_abort_cmd_end;
+	}
+
 	CMD_STATE(sc) = FNIC_IOREQ_ABTS_COMPLETE;
 
 	/*

drivers/scsi/scsi_error.c

@@ -1041,7 +1041,7 @@ retry:
 		}
 		/* signal not to enter either branch of the if () below */
 		timeleft = 0;
-		rtn = NEEDS_RETRY;
+		rtn = FAILED;
 	} else {
 		timeleft = wait_for_completion_timeout(&done, timeout);
 		rtn = SUCCESS;
@@ -1081,7 +1081,7 @@ retry:
 			rtn = FAILED;
 			break;
 		}
-	} else if (!rtn) {
+	} else if (rtn != FAILED) {
 		scsi_abort_eh_cmnd(scmd);
 		rtn = FAILED;
 	}

drivers/scsi/sd.c

@@ -2623,8 +2623,9 @@ static void sd_read_block_limits(struct scsi_disk *sdkp)
 				sd_config_discard(sdkp, SD_LBP_WS16);
 
 		} else {	/* LBP VPD page tells us what to use */
-
-			if (sdkp->lbpws)
+			if (sdkp->lbpu && sdkp->max_unmap_blocks && !sdkp->lbprz)
+				sd_config_discard(sdkp, SD_LBP_UNMAP);
+			else if (sdkp->lbpws)
 				sd_config_discard(sdkp, SD_LBP_WS16);
 			else if (sdkp->lbpws10)
 				sd_config_discard(sdkp, SD_LBP_WS10);

drivers/spi/spi-img-spfi.c

@@ -341,7 +341,7 @@ static int img_spfi_start_dma(struct spi_master *master,
 		default:
 			rxconf.src_addr = spfi->phys + SPFI_RX_8BIT_VALID_DATA;
 			rxconf.src_addr_width = 1;
-			rxconf.src_maxburst = 1;
+			rxconf.src_maxburst = 4;
 		}
 		dmaengine_slave_config(spfi->rx_ch, &rxconf);
 
@@ -368,7 +368,7 @@ static int img_spfi_start_dma(struct spi_master *master,
 		default:
 			txconf.dst_addr = spfi->phys + SPFI_TX_8BIT_VALID_DATA;
 			txconf.dst_addr_width = 1;
-			txconf.dst_maxburst = 1;
+			txconf.dst_maxburst = 4;
 			break;
 		}
 		dmaengine_slave_config(spfi->tx_ch, &txconf);
@@ -390,14 +390,14 @@ static int img_spfi_start_dma(struct spi_master *master,
 		dma_async_issue_pending(spfi->rx_ch);
 	}
 
+	spfi_start(spfi);
+
 	if (xfer->tx_buf) {
 		spfi->tx_dma_busy = true;
 		dmaengine_submit(txdesc);
 		dma_async_issue_pending(spfi->tx_ch);
 	}
 
-	spfi_start(spfi);
-
 	return 1;
 
 stop_dma:

drivers/spi/spi-sh-msiof.c

@@ -480,6 +480,8 @@ static int sh_msiof_spi_setup(struct spi_device *spi)
 	struct device_node	*np = spi->master->dev.of_node;
 	struct sh_msiof_spi_priv *p = spi_master_get_devdata(spi->master);
 
+	pm_runtime_get_sync(&p->pdev->dev);
+
 	if (!np) {
 		/*
 		 * Use spi->controller_data for CS (same strategy as spi_gpio),
@@ -498,6 +500,9 @@ static int sh_msiof_spi_setup(struct spi_device *spi)
 	if (spi->cs_gpio >= 0)
 		gpio_set_value(spi->cs_gpio, !(spi->mode & SPI_CS_HIGH));
 
+
+	pm_runtime_put_sync(&p->pdev->dev);
+
 	return 0;
 }
 

drivers/thermal/cpu_cooling.c

@@ -4,6 +4,8 @@
  *  Copyright (C) 2012	Samsung Electronics Co., Ltd(http://www.samsung.com)
  *  Copyright (C) 2012  Amit Daniel <amit.kachhap@linaro.org>
  *
+ *  Copyright (C) 2014  Viresh Kumar <viresh.kumar@linaro.org>
+ *
  * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
  *  This program is free software; you can redistribute it and/or modify
  *  it under the terms of the GNU General Public License as published by
@@ -28,6 +30,20 @@
 #include <linux/cpu.h>
 #include <linux/cpu_cooling.h>
 
+/*
+ * Cooling state <-> CPUFreq frequency
+ *
+ * Cooling states are translated to frequencies throughout this driver and this
+ * is the relation between them.
+ *
+ * Highest cooling state corresponds to lowest possible frequency.
+ *
+ * i.e.
+ *	level 0 --> 1st Max Freq
+ *	level 1 --> 2nd Max Freq
+ *	...
+ */
+
 /**
  * struct cpufreq_cooling_device - data for cooling device with cpufreq
  * @id: unique integer value corresponding to each cpufreq_cooling_device
@@ -38,25 +54,27 @@
  *	cooling	devices.
  * @cpufreq_val: integer value representing the absolute value of the clipped
  *	frequency.
+ * @max_level: maximum cooling level. One less than total number of valid
+ *	cpufreq frequencies.
  * @allowed_cpus: all the cpus involved for this cpufreq_cooling_device.
+ * @node: list_head to link all cpufreq_cooling_device together.
  *
- * This structure is required for keeping information of each
- * cpufreq_cooling_device registered. In order to prevent corruption of this a
- * mutex lock cooling_cpufreq_lock is used.
+ * This structure is required for keeping information of each registered
+ * cpufreq_cooling_device.
  */
 struct cpufreq_cooling_device {
 	int id;
 	struct thermal_cooling_device *cool_dev;
 	unsigned int cpufreq_state;
 	unsigned int cpufreq_val;
+	unsigned int max_level;
+	unsigned int *freq_table;	/* In descending order */
 	struct cpumask allowed_cpus;
 	struct list_head node;
 };
 static DEFINE_IDR(cpufreq_idr);
 static DEFINE_MUTEX(cooling_cpufreq_lock);
 
-static unsigned int cpufreq_dev_count;
-
 static LIST_HEAD(cpufreq_dev_list);
 
 /**
@@ -98,120 +116,30 @@ static void release_idr(struct idr *idr, int id)
 /* Below code defines functions to be used for cpufreq as cooling device */
 
 /**
- * is_cpufreq_valid - function to check frequency transitioning capability.
- * @cpu: cpu for which check is needed.
+ * get_level: Find the level for a particular frequency
+ * @cpufreq_dev: cpufreq_dev for which the property is required
+ * @freq: Frequency
  *
- * This function will check the current state of the system if
- * it is capable of changing the frequency for a given @cpu.
- *
- * Return: 0 if the system is not currently capable of changing
- * the frequency of given cpu. !0 in case the frequency is changeable.
+ * Return: level on success, THERMAL_CSTATE_INVALID on error.
  */
-static int is_cpufreq_valid(int cpu)
+static unsigned long get_level(struct cpufreq_cooling_device *cpufreq_dev,
+			       unsigned int freq)
 {
-	struct cpufreq_policy policy;
-
-	return !cpufreq_get_policy(&policy, cpu);
-}
-
-enum cpufreq_cooling_property {
-	GET_LEVEL,
-	GET_FREQ,
-	GET_MAXL,
-};
-
-/**
- * get_property - fetch a property of interest for a give cpu.
- * @cpu: cpu for which the property is required
- * @input: query parameter
- * @output: query return
- * @property: type of query (frequency, level, max level)
- *
- * This is the common function to
- * 1. get maximum cpu cooling states
- * 2. translate frequency to cooling state
- * 3. translate cooling state to frequency
- * Note that the code may be not in good shape
- * but it is written in this way in order to:
- * a) reduce duplicate code as most of the code can be shared.
- * b) make sure the logic is consistent when translating between
- *    cooling states and frequencies.
- *
- * Return: 0 on success, -EINVAL when invalid parameters are passed.
- */
-static int get_property(unsigned int cpu, unsigned long input,
-			unsigned int *output,
-			enum cpufreq_cooling_property property)
-{
-	int i;
-	unsigned long max_level = 0, level = 0;
-	unsigned int freq = CPUFREQ_ENTRY_INVALID;
-	int descend = -1;
-	struct cpufreq_frequency_table *pos, *table =
-					cpufreq_frequency_get_table(cpu);
-
-	if (!output)
-		return -EINVAL;
-
-	if (!table)
-		return -EINVAL;
-
-	cpufreq_for_each_valid_entry(pos, table) {
-		/* ignore duplicate entry */
-		if (freq == pos->frequency)
-			continue;
-
-		/* get the frequency order */
-		if (freq != CPUFREQ_ENTRY_INVALID && descend == -1)
-			descend = freq > pos->frequency;
-
-		freq = pos->frequency;
-		max_level++;
-	}
-
-	/* No valid cpu frequency entry */
-	if (max_level == 0)
-		return -EINVAL;
+	unsigned long level;
 
-	/* max_level is an index, not a counter */
-	max_level--;
+	for (level = 0; level <= cpufreq_dev->max_level; level++) {
+		if (freq == cpufreq_dev->freq_table[level])
+			return level;
 
-	/* get max level */
-	if (property == GET_MAXL) {
-		*output = (unsigned int)max_level;
-		return 0;
+		if (freq > cpufreq_dev->freq_table[level])
+			break;
 	}
 
-	if (property == GET_FREQ)
-		level = descend ? input : (max_level - input);
-
-	i = 0;
-	cpufreq_for_each_valid_entry(pos, table) {
-		/* ignore duplicate entry */
-		if (freq == pos->frequency)
-			continue;
-
-		/* now we have a valid frequency entry */
-		freq = pos->frequency;
-
-		if (property == GET_LEVEL && (unsigned int)input == freq) {
-			/* get level by frequency */
-			*output = descend ? i : (max_level - i);
-			return 0;
-		}
-		if (property == GET_FREQ && level == i) {
-			/* get frequency by level */
-			*output = freq;
-			return 0;
-		}
-		i++;
-	}
-
-	return -EINVAL;
+	return THERMAL_CSTATE_INVALID;
 }
 
 /**
- * cpufreq_cooling_get_level - for a give cpu, return the cooling level.
+ * cpufreq_cooling_get_level - for a given cpu, return the cooling level.
  * @cpu: cpu for which the level is required
  * @freq: the frequency of interest
  *
@@ -223,77 +151,21 @@ static int get_property(unsigned int cpu, unsigned long input,
  */
 unsigned long cpufreq_cooling_get_level(unsigned int cpu, unsigned int freq)
 {
-	unsigned int val;
-
-	if (get_property(cpu, (unsigned long)freq, &val, GET_LEVEL))
-		return THERMAL_CSTATE_INVALID;
-
-	return (unsigned long)val;
-}
-EXPORT_SYMBOL_GPL(cpufreq_cooling_get_level);
-
-/**
- * get_cpu_frequency - get the absolute value of frequency from level.
- * @cpu: cpu for which frequency is fetched.
- * @level: cooling level
- *
- * This function matches cooling level with frequency. Based on a cooling level
- * of frequency, equals cooling state of cpu cooling device, it will return
- * the corresponding frequency.
- *	e.g level=0 --> 1st MAX FREQ, level=1 ---> 2nd MAX FREQ, .... etc
- *
- * Return: 0 on error, the corresponding frequency otherwise.
- */
-static unsigned int get_cpu_frequency(unsigned int cpu, unsigned long level)
-{
-	int ret = 0;
-	unsigned int freq;
-
-	ret = get_property(cpu, level, &freq, GET_FREQ);
-	if (ret)
-		return 0;
-
-	return freq;
-}
-
-/**
- * cpufreq_apply_cooling - function to apply frequency clipping.
- * @cpufreq_device: cpufreq_cooling_device pointer containing frequency
- *	clipping data.
- * @cooling_state: value of the cooling state.
- *
- * Function used to make sure the cpufreq layer is aware of current thermal
- * limits. The limits are applied by updating the cpufreq policy.
- *
- * Return: 0 on success, an error code otherwise (-EINVAL in case wrong
- * cooling state).
- */
-static int cpufreq_apply_cooling(struct cpufreq_cooling_device *cpufreq_device,
-				 unsigned long cooling_state)
-{
-	unsigned int cpuid, clip_freq;
-	struct cpumask *mask = &cpufreq_device->allowed_cpus;
-	unsigned int cpu = cpumask_any(mask);
-
-
-	/* Check if the old cooling action is same as new cooling action */
-	if (cpufreq_device->cpufreq_state == cooling_state)
-		return 0;
-
-	clip_freq = get_cpu_frequency(cpu, cooling_state);
-	if (!clip_freq)
-		return -EINVAL;
-
-	cpufreq_device->cpufreq_state = cooling_state;
-	cpufreq_device->cpufreq_val = clip_freq;
+	struct cpufreq_cooling_device *cpufreq_dev;
 
-	for_each_cpu(cpuid, mask) {
-		if (is_cpufreq_valid(cpuid))
-			cpufreq_update_policy(cpuid);
+	mutex_lock(&cooling_cpufreq_lock);
+	list_for_each_entry(cpufreq_dev, &cpufreq_dev_list, node) {
+		if (cpumask_test_cpu(cpu, &cpufreq_dev->allowed_cpus)) {
+			mutex_unlock(&cooling_cpufreq_lock);
+			return get_level(cpufreq_dev, freq);
+		}
 	}
+	mutex_unlock(&cooling_cpufreq_lock);
 
-	return 0;
+	pr_err("%s: cpu:%d not part of any cooling device\n", __func__, cpu);
+	return THERMAL_CSTATE_INVALID;
 }
+EXPORT_SYMBOL_GPL(cpufreq_cooling_get_level);
 
 /**
  * cpufreq_thermal_notifier - notifier callback for cpufreq policy change.
@@ -323,11 +195,6 @@ static int cpufreq_thermal_notifier(struct notifier_block *nb,
 					&cpufreq_dev->allowed_cpus))
 			continue;
 
-		if (!cpufreq_dev->cpufreq_val)
-			cpufreq_dev->cpufreq_val = get_cpu_frequency(
-					cpumask_any(&cpufreq_dev->allowed_cpus),
-					cpufreq_dev->cpufreq_state);
-
 		max_freq = cpufreq_dev->cpufreq_val;
 
 		if (policy->max != max_freq)
@@ -354,19 +221,9 @@ static int cpufreq_get_max_state(struct thermal_cooling_device *cdev,
 				 unsigned long *state)
 {
 	struct cpufreq_cooling_device *cpufreq_device = cdev->devdata;
-	struct cpumask *mask = &cpufreq_device->allowed_cpus;
-	unsigned int cpu;
-	unsigned int count = 0;
-	int ret;
-
-	cpu = cpumask_any(mask);
-
-	ret = get_property(cpu, 0, &count, GET_MAXL);
 
-	if (count > 0)
-		*state = count;
-
-	return ret;
+	*state = cpufreq_device->max_level;
+	return 0;
 }
 
 /**
@@ -403,8 +260,24 @@ static int cpufreq_set_cur_state(struct thermal_cooling_device *cdev,
 				 unsigned long state)
 {
 	struct cpufreq_cooling_device *cpufreq_device = cdev->devdata;
+	unsigned int cpu = cpumask_any(&cpufreq_device->allowed_cpus);
+	unsigned int clip_freq;
+
+	/* Request state should be less than max_level */
+	if (WARN_ON(state > cpufreq_device->max_level))
+		return -EINVAL;
+
+	/* Check if the old cooling action is same as new cooling action */
+	if (cpufreq_device->cpufreq_state == state)
+		return 0;
 
-	return cpufreq_apply_cooling(cpufreq_device, state);
+	clip_freq = cpufreq_device->freq_table[state];
+	cpufreq_device->cpufreq_state = state;
+	cpufreq_device->cpufreq_val = clip_freq;
+
+	cpufreq_update_policy(cpu);
+
+	return 0;
 }
 
 /* Bind cpufreq callbacks to thermal cooling device ops */
@@ -419,10 +292,25 @@ static struct notifier_block thermal_cpufreq_notifier_block = {
 	.notifier_call = cpufreq_thermal_notifier,
 };
 
+static unsigned int find_next_max(struct cpufreq_frequency_table *table,
+				  unsigned int prev_max)
+{
+	struct cpufreq_frequency_table *pos;
+	unsigned int max = 0;
+
+	cpufreq_for_each_valid_entry(pos, table) {
+		if (pos->frequency > max && pos->frequency < prev_max)
+			max = pos->frequency;
+	}
+
+	return max;
+}
+
 /**
  * __cpufreq_cooling_register - helper function to create cpufreq cooling device
  * @np: a valid struct device_node to the cooling device device tree node
  * @clip_cpus: cpumask of cpus where the frequency constraints will happen.
+ * Normally this should be same as cpufreq policy->related_cpus.
  *
  * This interface function registers the cpufreq cooling device with the name
  * "thermal-cpufreq-%x". This api can support multiple instances of cpufreq
@@ -437,37 +325,42 @@ __cpufreq_cooling_register(struct device_node *np,
 			   const struct cpumask *clip_cpus)
 {
 	struct thermal_cooling_device *cool_dev;
-	struct cpufreq_cooling_device *cpufreq_dev = NULL;
-	unsigned int min = 0, max = 0;
+	struct cpufreq_cooling_device *cpufreq_dev;
 	char dev_name[THERMAL_NAME_LENGTH];
-	int ret = 0, i;
-	struct cpufreq_policy policy;
+	struct cpufreq_frequency_table *pos, *table;
+	unsigned int freq, i;
+	int ret;
 
-	/* Verify that all the clip cpus have same freq_min, freq_max limit */
-	for_each_cpu(i, clip_cpus) {
-		/* continue if cpufreq policy not found and not return error */
-		if (!cpufreq_get_policy(&policy, i))
-			continue;
-		if (min == 0 && max == 0) {
-			min = policy.cpuinfo.min_freq;
-			max = policy.cpuinfo.max_freq;
-		} else {
-			if (min != policy.cpuinfo.min_freq ||
-			    max != policy.cpuinfo.max_freq)
-				return ERR_PTR(-EINVAL);
-		}
+	table = cpufreq_frequency_get_table(cpumask_first(clip_cpus));
+	if (!table) {
+		pr_debug("%s: CPUFreq table not found\n", __func__);
+		return ERR_PTR(-EPROBE_DEFER);
 	}
-	cpufreq_dev = kzalloc(sizeof(struct cpufreq_cooling_device),
-			      GFP_KERNEL);
+
+	cpufreq_dev = kzalloc(sizeof(*cpufreq_dev), GFP_KERNEL);
 	if (!cpufreq_dev)
 		return ERR_PTR(-ENOMEM);
 
+	/* Find max levels */
+	cpufreq_for_each_valid_entry(pos, table)
+		cpufreq_dev->max_level++;
+
+	cpufreq_dev->freq_table = kmalloc(sizeof(*cpufreq_dev->freq_table) *
+					  cpufreq_dev->max_level, GFP_KERNEL);
+	if (!cpufreq_dev->freq_table) {
+		cool_dev = ERR_PTR(-ENOMEM);
+		goto free_cdev;
+	}
+
+	/* max_level is an index, not a counter */
+	cpufreq_dev->max_level--;
+
 	cpumask_copy(&cpufreq_dev->allowed_cpus, clip_cpus);
 
 	ret = get_idr(&cpufreq_idr, &cpufreq_dev->id);
 	if (ret) {
-		kfree(cpufreq_dev);
-		return ERR_PTR(-EINVAL);
+		cool_dev = ERR_PTR(ret);
+		goto free_table;
 	}
 
 	snprintf(dev_name, sizeof(dev_name), "thermal-cpufreq-%d",
@@ -475,24 +368,43 @@ __cpufreq_cooling_register(struct device_node *np,
 
 	cool_dev = thermal_of_cooling_device_register(np, dev_name, cpufreq_dev,
 						      &cpufreq_cooling_ops);
-	if (IS_ERR(cool_dev)) {
-		release_idr(&cpufreq_idr, cpufreq_dev->id);
-		kfree(cpufreq_dev);
-		return cool_dev;
+	if (IS_ERR(cool_dev))
+		goto remove_idr;
+
+	/* Fill freq-table in descending order of frequencies */
+	for (i = 0, freq = -1; i <= cpufreq_dev->max_level; i++) {
+		freq = find_next_max(table, freq);
+		cpufreq_dev->freq_table[i] = freq;
+
+		/* Warn for duplicate entries */
+		if (!freq)
+			pr_warn("%s: table has duplicate entries\n", __func__);
+		else
+			pr_debug("%s: freq:%u KHz\n", __func__, freq);
 	}
+
+	cpufreq_dev->cpufreq_val = cpufreq_dev->freq_table[0];
 	cpufreq_dev->cool_dev = cool_dev;
-	cpufreq_dev->cpufreq_state = 0;
+
 	mutex_lock(&cooling_cpufreq_lock);
 
 	/* Register the notifier for first cpufreq cooling device */
-	if (cpufreq_dev_count == 0)
+	if (list_empty(&cpufreq_dev_list))
 		cpufreq_register_notifier(&thermal_cpufreq_notifier_block,
 					  CPUFREQ_POLICY_NOTIFIER);
-	cpufreq_dev_count++;
 	list_add(&cpufreq_dev->node, &cpufreq_dev_list);
 
 	mutex_unlock(&cooling_cpufreq_lock);
 
+	return cool_dev;
+
+remove_idr:
+	release_idr(&cpufreq_idr, cpufreq_dev->id);
+free_table:
+	kfree(cpufreq_dev->freq_table);
+free_cdev:
+	kfree(cpufreq_dev);
+
 	return cool_dev;
 }
 
@@ -554,16 +466,16 @@ void cpufreq_cooling_unregister(struct thermal_cooling_device *cdev)
 	cpufreq_dev = cdev->devdata;
 	mutex_lock(&cooling_cpufreq_lock);
 	list_del(&cpufreq_dev->node);
-	cpufreq_dev_count--;
 
 	/* Unregister the notifier for the last cpufreq cooling device */
-	if (cpufreq_dev_count == 0)
+	if (list_empty(&cpufreq_dev_list))
 		cpufreq_unregister_notifier(&thermal_cpufreq_notifier_block,
 					    CPUFREQ_POLICY_NOTIFIER);
 	mutex_unlock(&cooling_cpufreq_lock);
 
 	thermal_cooling_device_unregister(cpufreq_dev->cool_dev);
 	release_idr(&cpufreq_idr, cpufreq_dev->id);
+	kfree(cpufreq_dev->freq_table);
 	kfree(cpufreq_dev);
 }
 EXPORT_SYMBOL_GPL(cpufreq_cooling_unregister);

drivers/thermal/db8500_cpufreq_cooling.c

@@ -18,7 +18,6 @@
  */
 
 #include <linux/cpu_cooling.h>
-#include <linux/cpufreq.h>
 #include <linux/err.h>
 #include <linux/module.h>
 #include <linux/of.h>
@@ -28,18 +27,17 @@
 static int db8500_cpufreq_cooling_probe(struct platform_device *pdev)
 {
 	struct thermal_cooling_device *cdev;
-	struct cpumask mask_val;
-
-	/* make sure cpufreq driver has been initialized */
-	if (!cpufreq_frequency_get_table(0))
-		return -EPROBE_DEFER;
-
-	cpumask_set_cpu(0, &mask_val);
-	cdev = cpufreq_cooling_register(&mask_val);
 
+	cdev = cpufreq_cooling_register(cpu_present_mask);
 	if (IS_ERR(cdev)) {
-		dev_err(&pdev->dev, "Failed to register cooling device\n");
-		return PTR_ERR(cdev);
+		int ret = PTR_ERR(cdev);
+
+		if (ret != -EPROBE_DEFER)
+			dev_err(&pdev->dev,
+				"Failed to register cooling device %d\n",
+				ret);
+				
+		return ret;
 	}
 
 	platform_set_drvdata(pdev, cdev);

drivers/thermal/imx_thermal.c

@@ -9,7 +9,6 @@
 
 #include <linux/clk.h>
 #include <linux/cpu_cooling.h>
-#include <linux/cpufreq.h>
 #include <linux/delay.h>
 #include <linux/device.h>
 #include <linux/init.h>
@@ -454,15 +453,10 @@ static int imx_thermal_probe(struct platform_device *pdev)
 	const struct of_device_id *of_id =
 		of_match_device(of_imx_thermal_match, &pdev->dev);
 	struct imx_thermal_data *data;
-	struct cpumask clip_cpus;
 	struct regmap *map;
 	int measure_freq;
 	int ret;
 
-	if (!cpufreq_get_current_driver()) {
-		dev_dbg(&pdev->dev, "no cpufreq driver!");
-		return -EPROBE_DEFER;
-	}
 	data = devm_kzalloc(&pdev->dev, sizeof(*data), GFP_KERNEL);
 	if (!data)
 		return -ENOMEM;
@@ -516,12 +510,13 @@ static int imx_thermal_probe(struct platform_device *pdev)
 	regmap_write(map, MISC0 + REG_SET, MISC0_REFTOP_SELBIASOFF);
 	regmap_write(map, TEMPSENSE0 + REG_SET, TEMPSENSE0_POWER_DOWN);
 
-	cpumask_set_cpu(0, &clip_cpus);
-	data->cdev = cpufreq_cooling_register(&clip_cpus);
+	data->cdev = cpufreq_cooling_register(cpu_present_mask);
 	if (IS_ERR(data->cdev)) {
 		ret = PTR_ERR(data->cdev);
-		dev_err(&pdev->dev,
-			"failed to register cpufreq cooling device: %d\n", ret);
+		if (ret != -EPROBE_DEFER)
+			dev_err(&pdev->dev,
+				"failed to register cpufreq cooling device: %d\n",
+				ret);
 		return ret;
 	}
 

drivers/thermal/int340x_thermal/Makefile

@@ -1,4 +1,5 @@
 obj-$(CONFIG_INT340X_THERMAL)	+= int3400_thermal.o
 obj-$(CONFIG_INT340X_THERMAL)	+= int3402_thermal.o
 obj-$(CONFIG_INT340X_THERMAL)	+= int3403_thermal.o
+obj-$(CONFIG_INT340X_THERMAL)	+= processor_thermal_device.o
 obj-$(CONFIG_ACPI_THERMAL_REL)	+= acpi_thermal_rel.o

drivers/thermal/int340x_thermal/acpi_thermal_rel.c

@@ -82,7 +82,7 @@ int acpi_parse_trt(acpi_handle handle, int *trt_count, struct trt **trtp,
 	struct acpi_buffer trt_format = { sizeof("RRNNNNNN"), "RRNNNNNN" };
 
 	if (!acpi_has_method(handle, "_TRT"))
-		return 0;
+		return -ENODEV;
 
 	status = acpi_evaluate_object(handle, "_TRT", NULL, &buffer);
 	if (ACPI_FAILURE(status))
@@ -167,7 +167,7 @@ int acpi_parse_art(acpi_handle handle, int *art_count, struct art **artp,
 		sizeof("RRNNNNNNNNNNN"), "RRNNNNNNNNNNN" };
 
 	if (!acpi_has_method(handle, "_ART"))
-		return 0;
+		return -ENODEV;
 
 	status = acpi_evaluate_object(handle, "_ART", NULL, &buffer);
 	if (ACPI_FAILURE(status))
@@ -321,8 +321,8 @@ static long acpi_thermal_rel_ioctl(struct file *f, unsigned int cmd,
 	unsigned long length = 0;
 	int count = 0;
 	char __user *arg = (void __user *)__arg;
-	struct trt *trts;
-	struct art *arts;
+	struct trt *trts = NULL;
+	struct art *arts = NULL;
 
 	switch (cmd) {
 	case ACPI_THERMAL_GET_TRT_COUNT: