qlcnic: Register netdev in FAILED state for 83xx/84xx

o Without failing probe, register netdev when device is in FAILED state.
o Device will come up with minimum functionality and allow diagnostics and
  repair of the adapter.

Signed-off-by: Sucheta Chakraborty <sucheta.chakraborty@qlogic.com>
Signed-off-by: Himanshu Madhani <himanshu.madhani@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

drivers/net/ethernet/qlogic/qlcnic/qlcnic.h

@@ -961,6 +961,7 @@ struct qlcnic_ipaddr {
 #define __QLCNIC_SRIOV_CAPABLE		11
 #define __QLCNIC_MBX_POLL_ENABLE	12
 #define __QLCNIC_DIAG_MODE		13
+#define __QLCNIC_MAINTENANCE_MODE	16
 
 #define QLCNIC_INTERRUPT_TEST		1
 #define QLCNIC_LOOPBACK_TEST		2

drivers/net/ethernet/qlogic/qlcnic/qlcnic_83xx_hw.c

@@ -325,7 +325,8 @@ inline void qlcnic_83xx_clear_legacy_intr_mask(struct qlcnic_adapter *adapter)
 
 inline void qlcnic_83xx_set_legacy_intr_mask(struct qlcnic_adapter *adapter)
 {
-	writel(1, adapter->tgt_mask_reg);
+	if (adapter->tgt_mask_reg)
+		writel(1, adapter->tgt_mask_reg);
 }
 
 /* Enable MSI-x and INT-x interrupts */
@@ -498,8 +499,11 @@ void qlcnic_83xx_free_mbx_intr(struct qlcnic_adapter *adapter)
 		num_msix = 0;
 
 	msleep(20);
-	synchronize_irq(adapter->msix_entries[num_msix].vector);
-	free_irq(adapter->msix_entries[num_msix].vector, adapter);
+
+	if (adapter->msix_entries) {
+		synchronize_irq(adapter->msix_entries[num_msix].vector);
+		free_irq(adapter->msix_entries[num_msix].vector, adapter);
+	}
 }
 
 int qlcnic_83xx_setup_mbx_intr(struct qlcnic_adapter *adapter)
@@ -760,6 +764,9 @@ int qlcnic_83xx_issue_cmd(struct qlcnic_adapter *adapter,
 	int cmd_type, err, opcode;
 	unsigned long timeout;
 
+	if (!mbx)
+		return -EIO;
+
 	opcode = LSW(cmd->req.arg[0]);
 	cmd_type = cmd->type;
 	err = mbx->ops->enqueue_cmd(adapter, cmd, &timeout);
@@ -3049,11 +3056,14 @@ int qlcnic_83xx_get_settings(struct qlcnic_adapter *adapter,
 	int status = 0;
 	struct qlcnic_hardware_context *ahw = adapter->ahw;
 
-	/* Get port configuration info */
-	status = qlcnic_83xx_get_port_info(adapter);
-	/* Get Link Status related info */
-	config = qlcnic_83xx_test_link(adapter);
-	ahw->module_type = QLC_83XX_SFP_MODULE_TYPE(config);
+	if (!test_bit(__QLCNIC_MAINTENANCE_MODE, &adapter->state)) {
+		/* Get port configuration info */
+		status = qlcnic_83xx_get_port_info(adapter);
+		/* Get Link Status related info */
+		config = qlcnic_83xx_test_link(adapter);
+		ahw->module_type = QLC_83XX_SFP_MODULE_TYPE(config);
+	}
+
 	/* hard code until there is a way to get it from flash */
 	ahw->board_type = QLCNIC_BRDTYPE_83XX_10G;
 
@@ -3530,6 +3540,9 @@ void qlcnic_83xx_reinit_mbx_work(struct qlcnic_mailbox *mbx)
 
 void qlcnic_83xx_free_mailbox(struct qlcnic_mailbox *mbx)
 {
+	if (!mbx)
+		return;
+
 	destroy_workqueue(mbx->work_q);
 	kfree(mbx);
 }
@@ -3650,6 +3663,9 @@ void qlcnic_83xx_detach_mailbox_work(struct qlcnic_adapter *adapter)
 {
 	struct qlcnic_mailbox *mbx = adapter->ahw->mailbox;
 
+	if (!mbx)
+		return;
+
 	clear_bit(QLC_83XX_MBX_READY, &mbx->status);
 	complete(&mbx->completion);
 	cancel_work_sync(&mbx->work);

drivers/net/ethernet/qlogic/qlcnic/qlcnic_83xx_init.c

@@ -2190,20 +2190,24 @@ int qlcnic_83xx_init(struct qlcnic_adapter *adapter, int pci_using_dac)
 			return err;
 	}
 
+	if (qlcnic_83xx_read_flash_descriptor_table(adapter) ||
+	    qlcnic_83xx_read_flash_mfg_id(adapter)) {
+		dev_err(&adapter->pdev->dev, "Failed reading flash mfg id\n");
+		err = -ENOTRECOVERABLE;
+		goto detach_mbx;
+	}
+
 	err = qlcnic_83xx_check_hw_status(adapter);
 	if (err)
 		goto detach_mbx;
 
-	if (!qlcnic_83xx_read_flash_descriptor_table(adapter))
-		qlcnic_83xx_read_flash_mfg_id(adapter);
-
 	err = qlcnic_83xx_get_fw_info(adapter);
 	if (err)
 		goto detach_mbx;
 
 	err = qlcnic_83xx_idc_init(adapter);
 	if (err)
-		goto clear_fw_info;
+		goto detach_mbx;
 
 	err = qlcnic_setup_intr(adapter, 0, 0);
 	if (err) {
@@ -2247,12 +2251,10 @@ disable_mbx_intr:
 disable_intr:
 	qlcnic_teardown_intr(adapter);
 
-clear_fw_info:
-	kfree(ahw->fw_info);
-
 detach_mbx:
 	qlcnic_83xx_detach_mailbox_work(adapter);
 	qlcnic_83xx_free_mailbox(ahw->mailbox);
+	ahw->mailbox = NULL;
 exit:
 	return err;
 }

drivers/net/ethernet/qlogic/qlcnic/qlcnic_ethtool.c

@@ -1685,7 +1685,6 @@ qlcnic_set_dump(struct net_device *netdev, struct ethtool_dump *val)
 	struct qlcnic_fw_dump *fw_dump = &adapter->ahw->fw_dump;
 	bool valid_mask = false;
 	int i, ret = 0;
-	u32 state;
 
 	switch (val->flag) {
 	case QLCNIC_FORCE_FW_DUMP_KEY:
@@ -1738,9 +1737,8 @@ qlcnic_set_dump(struct net_device *netdev, struct ethtool_dump *val)
 
 	case QLCNIC_SET_QUIESCENT:
 	case QLCNIC_RESET_QUIESCENT:
-		state = QLC_SHARED_REG_RD32(adapter, QLCNIC_CRB_DEV_STATE);
-		if (state == QLCNIC_DEV_FAILED || (state == QLCNIC_DEV_BADBAD))
-			netdev_info(netdev, "Device in FAILED state\n");
+		if (test_bit(__QLCNIC_MAINTENANCE_MODE, &adapter->state))
+			netdev_info(netdev, "Device is in non-operational state\n");
 		break;
 
 	default:

drivers/net/ethernet/qlogic/qlcnic/qlcnic_main.c

@@ -2307,10 +2307,23 @@ qlcnic_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
 		qlcnic_83xx_check_vf(adapter, ent);
 		adapter->portnum = adapter->ahw->pci_func;
 		err = qlcnic_83xx_init(adapter, pci_using_dac);
+
 		if (err) {
-			dev_err(&pdev->dev, "%s: failed\n", __func__);
-			goto err_out_free_hw;
+			switch (err) {
+			case -ENOTRECOVERABLE:
+				dev_err(&pdev->dev, "Adapter initialization failed due to a faulty hardware. Please reboot\n");
+				dev_err(&pdev->dev, "If reboot doesn't help, please replace the adapter with new one and return the faulty adapter for repair\n");
+				goto err_out_free_hw;
+			case -ENOMEM:
+				dev_err(&pdev->dev, "Adapter initialization failed. Please reboot\n");
+				goto err_out_free_hw;
+			default:
+				dev_err(&pdev->dev, "Adapter initialization failed. A reboot may be required to recover from this failure\n");
+				dev_err(&pdev->dev, "If reboot does not help to recover from this failure, try a flash update of the adapter\n");
+				goto err_out_maintenance_mode;
+			}
 		}
+
 		if (qlcnic_sriov_vf_check(adapter))
 			return 0;
 	} else {
@@ -2412,8 +2425,16 @@ err_out_disable_pdev:
 	return err;
 
 err_out_maintenance_mode:
+	set_bit(__QLCNIC_MAINTENANCE_MODE, &adapter->state);
 	netdev->netdev_ops = &qlcnic_netdev_failed_ops;
 	SET_ETHTOOL_OPS(netdev, &qlcnic_ethtool_failed_ops);
+	ahw->port_type = QLCNIC_XGBE;
+
+	if (qlcnic_83xx_check(adapter))
+		adapter->tgt_status_reg = NULL;
+	else
+		ahw->board_type = QLCNIC_BRDTYPE_P3P_10G_SFP_PLUS;
+
 	err = register_netdev(netdev);
 
 	if (err) {
@@ -2535,12 +2556,11 @@ static int qlcnic_resume(struct pci_dev *pdev)
 static int qlcnic_open(struct net_device *netdev)
 {
 	struct qlcnic_adapter *adapter = netdev_priv(netdev);
-	u32 state;
 	int err;
 
-	state = QLC_SHARED_REG_RD32(adapter, QLCNIC_CRB_DEV_STATE);
-	if (state == QLCNIC_DEV_FAILED || state == QLCNIC_DEV_BADBAD) {
-		netdev_err(netdev, "%s: Device is in FAILED state\n", __func__);
+	if (test_bit(__QLCNIC_MAINTENANCE_MODE, &adapter->state)) {
+		netdev_err(netdev, "%s: Device is in non-operational state\n",
+			   __func__);
 
 		return -EIO;
 	}
@@ -3253,8 +3273,9 @@ void qlcnic_82xx_dev_request_reset(struct qlcnic_adapter *adapter, u32 key)
 		return;
 
 	state = QLC_SHARED_REG_RD32(adapter, QLCNIC_CRB_DEV_STATE);
-	if (state == QLCNIC_DEV_FAILED || state == QLCNIC_DEV_BADBAD) {
-		netdev_err(adapter->netdev, "%s: Device is in FAILED state\n",
+
+	if (test_bit(__QLCNIC_MAINTENANCE_MODE, &adapter->state)) {
+		netdev_err(adapter->netdev, "%s: Device is in non-operational state\n",
 			   __func__);
 		qlcnic_api_unlock(adapter);
 

drivers/net/ethernet/qlogic/qlcnic/qlcnic_sysfs.c

@@ -1272,7 +1272,6 @@ void qlcnic_remove_sysfs_entries(struct qlcnic_adapter *adapter)
 void qlcnic_create_diag_entries(struct qlcnic_adapter *adapter)
 {
 	struct device *dev = &adapter->pdev->dev;
-	u32 state;
 
 	if (device_create_bin_file(dev, &bin_attr_port_stats))
 		dev_info(dev, "failed to create port stats sysfs entry");
@@ -1286,8 +1285,7 @@ void qlcnic_create_diag_entries(struct qlcnic_adapter *adapter)
 	if (device_create_bin_file(dev, &bin_attr_mem))
 		dev_info(dev, "failed to create mem sysfs entry\n");
 
-	state = QLC_SHARED_REG_RD32(adapter, QLCNIC_CRB_DEV_STATE);
-	if (state == QLCNIC_DEV_FAILED || state == QLCNIC_DEV_BADBAD)
+	if (test_bit(__QLCNIC_MAINTENANCE_MODE, &adapter->state))
 		return;
 
 	if (device_create_bin_file(dev, &bin_attr_pci_config))
@@ -1313,7 +1311,6 @@ void qlcnic_create_diag_entries(struct qlcnic_adapter *adapter)
 void qlcnic_remove_diag_entries(struct qlcnic_adapter *adapter)
 {
 	struct device *dev = &adapter->pdev->dev;
-	u32 state;
 
 	device_remove_bin_file(dev, &bin_attr_port_stats);
 
@@ -1323,8 +1320,7 @@ void qlcnic_remove_diag_entries(struct qlcnic_adapter *adapter)
 	device_remove_bin_file(dev, &bin_attr_crb);
 	device_remove_bin_file(dev, &bin_attr_mem);
 
-	state = QLC_SHARED_REG_RD32(adapter, QLCNIC_CRB_DEV_STATE);
-	if (state == QLCNIC_DEV_FAILED || state == QLCNIC_DEV_BADBAD)
+	if (test_bit(__QLCNIC_MAINTENANCE_MODE, &adapter->state))
 		return;
 
 	device_remove_bin_file(dev, &bin_attr_pci_config);