mtd: nand: atmel: use mtd_ooblayout_xxx() helpers where appropriate

The mtd_ooblayout_xxx() helper functions have been added to avoid direct
accesses to the ecclayout field, and thus ease for future reworks.
Use these helpers in all places where the oobfree[] and eccpos[] arrays
where directly accessed.

Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Reviewed-by: Nicolas Ferre <nicolas.ferre@atmel.com>

drivers/mtd/nand/atmel_nand.c

@@ -833,13 +833,16 @@ static void pmecc_correct_data(struct mtd_info *mtd, uint8_t *buf, uint8_t *ecc,
 			dev_dbg(host->dev, "Bit flip in data area, byte_pos: %d, bit_pos: %d, 0x%02x -> 0x%02x\n",
 				pos, bit_pos, err_byte, *(buf + byte_pos));
 		} else {
+			struct mtd_oob_region oobregion;
+
 			/* Bit flip in OOB area */
 			tmp = sector_num * nand_chip->ecc.bytes
 					+ (byte_pos - sector_size);
 			err_byte = ecc[tmp];
 			ecc[tmp] ^= (1 << bit_pos);
 
-			pos = tmp + nand_chip->ecc.layout->eccpos[0];
+			mtd_ooblayout_ecc(mtd, 0, &oobregion);
+			pos = tmp + oobregion.offset;
 			dev_dbg(host->dev, "Bit flip in OOB, oob_byte_pos: %d, bit_pos: %d, 0x%02x -> 0x%02x\n",
 				pos, bit_pos, err_byte, ecc[tmp]);
 		}
@@ -931,7 +934,6 @@ static int atmel_nand_pmecc_read_page(struct mtd_info *mtd,
 	struct atmel_nand_host *host = nand_get_controller_data(chip);
 	int eccsize = chip->ecc.size * chip->ecc.steps;
 	uint8_t *oob = chip->oob_poi;
-	uint32_t *eccpos = chip->ecc.layout->eccpos;
 	uint32_t stat;
 	unsigned long end_time;
 	int bitflips = 0;
@@ -953,7 +955,11 @@ static int atmel_nand_pmecc_read_page(struct mtd_info *mtd,
 
 	stat = pmecc_readl_relaxed(host->ecc, ISR);
 	if (stat != 0) {
-		bitflips = pmecc_correction(mtd, stat, buf, &oob[eccpos[0]]);
+		struct mtd_oob_region oobregion;
+
+		mtd_ooblayout_ecc(mtd, 0, &oobregion);
+		bitflips = pmecc_correction(mtd, stat, buf,
+					    &oob[oobregion.offset]);
 		if (bitflips < 0)
 			/* uncorrectable errors */
 			return 0;
@@ -967,8 +973,8 @@ static int atmel_nand_pmecc_write_page(struct mtd_info *mtd,
 		int page)
 {
 	struct atmel_nand_host *host = nand_get_controller_data(chip);
-	uint32_t *eccpos = chip->ecc.layout->eccpos;
-	int i, j;
+	struct mtd_oob_region oobregion = { };
+	int i, j, section = 0;
 	unsigned long end_time;
 
 	if (!host->nfc || !host->nfc->write_by_sram) {
@@ -987,11 +993,14 @@ static int atmel_nand_pmecc_write_page(struct mtd_info *mtd,
 
 	for (i = 0; i < chip->ecc.steps; i++) {
 		for (j = 0; j < chip->ecc.bytes; j++) {
-			int pos;
+			if (!oobregion.length)
+				mtd_ooblayout_ecc(mtd, section, &oobregion);
 
-			pos = i * chip->ecc.bytes + j;
-			chip->oob_poi[eccpos[pos]] =
+			chip->oob_poi[oobregion.offset] =
 				pmecc_readb_ecc_relaxed(host->ecc, i, j);
+			oobregion.length--;
+			oobregion.offset++;
+			section++;
 		}
 	}
 	chip->write_buf(mtd, chip->oob_poi, mtd->oobsize);
@@ -1005,6 +1014,7 @@ static void atmel_pmecc_core_init(struct mtd_info *mtd)
 	struct atmel_nand_host *host = nand_get_controller_data(nand_chip);
 	uint32_t val = 0;
 	struct nand_ecclayout *ecc_layout;
+	struct mtd_oob_region oobregion;
 
 	pmecc_writel(host->ecc, CTRL, PMECC_CTRL_RST);
 	pmecc_writel(host->ecc, CTRL, PMECC_CTRL_DISABLE);
@@ -1056,9 +1066,10 @@ static void atmel_pmecc_core_init(struct mtd_info *mtd)
 
 	ecc_layout = nand_chip->ecc.layout;
 	pmecc_writel(host->ecc, SAREA, mtd->oobsize - 1);
-	pmecc_writel(host->ecc, SADDR, ecc_layout->eccpos[0]);
+	mtd_ooblayout_ecc(mtd, 0, &oobregion);
+	pmecc_writel(host->ecc, SADDR, oobregion.offset);
 	pmecc_writel(host->ecc, EADDR,
-			ecc_layout->eccpos[ecc_layout->eccbytes - 1]);
+		     oobregion.offset + ecc_layout->eccbytes - 1);
 	/* See datasheet about PMECC Clock Control Register */
 	pmecc_writel(host->ecc, CLK, 2);
 	pmecc_writel(host->ecc, IDR, 0xff);
@@ -1359,12 +1370,12 @@ static int atmel_nand_read_page(struct mtd_info *mtd, struct nand_chip *chip,
 {
 	int eccsize = chip->ecc.size;
 	int eccbytes = chip->ecc.bytes;
-	uint32_t *eccpos = chip->ecc.layout->eccpos;
 	uint8_t *p = buf;
 	uint8_t *oob = chip->oob_poi;
 	uint8_t *ecc_pos;
 	int stat;
 	unsigned int max_bitflips = 0;
+	struct mtd_oob_region oobregion = {};
 
 	/*
 	 * Errata: ALE is incorrectly wired up to the ECC controller
@@ -1382,19 +1393,20 @@ static int atmel_nand_read_page(struct mtd_info *mtd, struct nand_chip *chip,
 	chip->read_buf(mtd, p, eccsize);
 
 	/* move to ECC position if needed */
-	if (eccpos[0] != 0) {
-		/* This only works on large pages
-		 * because the ECC controller waits for
-		 * NAND_CMD_RNDOUTSTART after the
-		 * NAND_CMD_RNDOUT.
-		 * anyway, for small pages, the eccpos[0] == 0
+	mtd_ooblayout_ecc(mtd, 0, &oobregion);
+	if (oobregion.offset != 0) {
+		/*
+		 * This only works on large pages because the ECC controller
+		 * waits for NAND_CMD_RNDOUTSTART after the NAND_CMD_RNDOUT.
+		 * Anyway, for small pages, the first ECC byte is at offset
+		 * 0 in the OOB area.
 		 */
 		chip->cmdfunc(mtd, NAND_CMD_RNDOUT,
-				mtd->writesize + eccpos[0], -1);
+			      mtd->writesize + oobregion.offset, -1);
 	}
 
 	/* the ECC controller needs to read the ECC just after the data */
-	ecc_pos = oob + eccpos[0];
+	ecc_pos = oob + oobregion.offset;
 	chip->read_buf(mtd, ecc_pos, eccbytes);
 
 	/* check if there's an error */