|
@@ -90,77 +90,94 @@
|
|
|
#define MRLSENSOR 0x40000000
|
|
|
#define ATTN_BUTTON 0x80000000
|
|
|
|
|
|
-/* Slot Status Field Definitions */
|
|
|
-/* Slot State */
|
|
|
-#define PWR_ONLY 0x0001
|
|
|
-#define ENABLED 0x0002
|
|
|
-#define DISABLED 0x0003
|
|
|
-
|
|
|
-/* Power Indicator State */
|
|
|
-#define PWR_LED_ON 0x0004
|
|
|
-#define PWR_LED_BLINK 0x0008
|
|
|
-#define PWR_LED_OFF 0x000c
|
|
|
-
|
|
|
-/* Attention Indicator State */
|
|
|
-#define ATTEN_LED_ON 0x0010
|
|
|
-#define ATTEN_LED_BLINK 0x0020
|
|
|
-#define ATTEN_LED_OFF 0x0030
|
|
|
-
|
|
|
-/* Power Fault */
|
|
|
-#define pwr_fault 0x0040
|
|
|
-
|
|
|
-/* Attention Button */
|
|
|
-#define ATTEN_BUTTON 0x0080
|
|
|
-
|
|
|
-/* MRL Sensor */
|
|
|
-#define MRL_SENSOR 0x0100
|
|
|
-
|
|
|
-/* 66 MHz Capable */
|
|
|
-#define IS_66MHZ_CAP 0x0200
|
|
|
-
|
|
|
-/* PRSNT1#/PRSNT2# */
|
|
|
-#define SLOT_EMP 0x0c00
|
|
|
-
|
|
|
-/* PCI-X Capability */
|
|
|
-#define NON_PCIX 0x0000
|
|
|
-#define PCIX_66 0x1000
|
|
|
-#define PCIX_133 0x3000
|
|
|
-#define PCIX_266 0x4000 /* For PI = 2 only */
|
|
|
-#define PCIX_533 0x5000 /* For PI = 2 only */
|
|
|
-
|
|
|
-/* SHPC 'write' operations/commands */
|
|
|
-
|
|
|
-/* Slot operation - 0x00h to 0x3Fh */
|
|
|
-
|
|
|
-#define NO_CHANGE 0x00
|
|
|
-
|
|
|
-/* Slot state - Bits 0 & 1 of controller command register */
|
|
|
-#define SET_SLOT_PWR 0x01
|
|
|
-#define SET_SLOT_ENABLE 0x02
|
|
|
-#define SET_SLOT_DISABLE 0x03
|
|
|
+/*
|
|
|
+ * Interrupt Locator Register definitions
|
|
|
+ */
|
|
|
+#define CMD_INTR_PENDING (1 << 0)
|
|
|
+#define SLOT_INTR_PENDING(i) (1 << (i + 1))
|
|
|
|
|
|
-/* Power indicator state - Bits 2 & 3 of controller command register*/
|
|
|
-#define SET_PWR_ON 0x04
|
|
|
-#define SET_PWR_BLINK 0x08
|
|
|
-#define SET_PWR_OFF 0x0C
|
|
|
+/*
|
|
|
+ * Controller SERR-INT Register
|
|
|
+ */
|
|
|
+#define GLOBAL_INTR_MASK (1 << 0)
|
|
|
+#define GLOBAL_SERR_MASK (1 << 1)
|
|
|
+#define COMMAND_INTR_MASK (1 << 2)
|
|
|
+#define ARBITER_SERR_MASK (1 << 3)
|
|
|
+#define COMMAND_DETECTED (1 << 16)
|
|
|
+#define ARBITER_DETECTED (1 << 17)
|
|
|
+#define SERR_INTR_RSVDZ_MASK 0xfffc0000
|
|
|
|
|
|
-/* Attention indicator state - Bits 4 & 5 of controller command register*/
|
|
|
-#define SET_ATTN_ON 0x010
|
|
|
-#define SET_ATTN_BLINK 0x020
|
|
|
-#define SET_ATTN_OFF 0x030
|
|
|
+/*
|
|
|
+ * Logical Slot Register definitions
|
|
|
+ */
|
|
|
+#define SLOT_REG(i) (SLOT1 + (4 * i))
|
|
|
+
|
|
|
+#define SLOT_STATE_SHIFT (0)
|
|
|
+#define SLOT_STATE_MASK (3 << 0)
|
|
|
+#define SLOT_STATE_PWRONLY (1)
|
|
|
+#define SLOT_STATE_ENABLED (2)
|
|
|
+#define SLOT_STATE_DISABLED (3)
|
|
|
+#define PWR_LED_STATE_SHIFT (2)
|
|
|
+#define PWR_LED_STATE_MASK (3 << 2)
|
|
|
+#define ATN_LED_STATE_SHIFT (4)
|
|
|
+#define ATN_LED_STATE_MASK (3 << 4)
|
|
|
+#define ATN_LED_STATE_ON (1)
|
|
|
+#define ATN_LED_STATE_BLINK (2)
|
|
|
+#define ATN_LED_STATE_OFF (3)
|
|
|
+#define POWER_FAULT (1 << 6)
|
|
|
+#define ATN_BUTTON (1 << 7)
|
|
|
+#define MRL_SENSOR (1 << 8)
|
|
|
+#define MHZ66_CAP (1 << 9)
|
|
|
+#define PRSNT_SHIFT (10)
|
|
|
+#define PRSNT_MASK (3 << 10)
|
|
|
+#define PCIX_CAP_SHIFT (12)
|
|
|
+#define PCIX_CAP_MASK_PI1 (3 << 12)
|
|
|
+#define PCIX_CAP_MASK_PI2 (7 << 12)
|
|
|
+#define PRSNT_CHANGE_DETECTED (1 << 16)
|
|
|
+#define ISO_PFAULT_DETECTED (1 << 17)
|
|
|
+#define BUTTON_PRESS_DETECTED (1 << 18)
|
|
|
+#define MRL_CHANGE_DETECTED (1 << 19)
|
|
|
+#define CON_PFAULT_DETECTED (1 << 20)
|
|
|
+#define PRSNT_CHANGE_INTR_MASK (1 << 24)
|
|
|
+#define ISO_PFAULT_INTR_MASK (1 << 25)
|
|
|
+#define BUTTON_PRESS_INTR_MASK (1 << 26)
|
|
|
+#define MRL_CHANGE_INTR_MASK (1 << 27)
|
|
|
+#define CON_PFAULT_INTR_MASK (1 << 28)
|
|
|
+#define MRL_CHANGE_SERR_MASK (1 << 29)
|
|
|
+#define CON_PFAULT_SERR_MASK (1 << 30)
|
|
|
+#define SLOT_REG_RSVDZ_MASK (1 << 15) | (7 << 21)
|
|
|
|
|
|
-/* Set bus speed/mode A - 0x40h to 0x47h */
|
|
|
-#define SETA_PCI_33MHZ 0x40
|
|
|
+/*
|
|
|
+ * SHPC Command Code definitnions
|
|
|
+ *
|
|
|
+ * Slot Operation 00h - 3Fh
|
|
|
+ * Set Bus Segment Speed/Mode A 40h - 47h
|
|
|
+ * Power-Only All Slots 48h
|
|
|
+ * Enable All Slots 49h
|
|
|
+ * Set Bus Segment Speed/Mode B (PI=2) 50h - 5Fh
|
|
|
+ * Reserved Command Codes 60h - BFh
|
|
|
+ * Vendor Specific Commands C0h - FFh
|
|
|
+ */
|
|
|
+#define SET_SLOT_PWR 0x01 /* Slot Operation */
|
|
|
+#define SET_SLOT_ENABLE 0x02
|
|
|
+#define SET_SLOT_DISABLE 0x03
|
|
|
+#define SET_PWR_ON 0x04
|
|
|
+#define SET_PWR_BLINK 0x08
|
|
|
+#define SET_PWR_OFF 0x0c
|
|
|
+#define SET_ATTN_ON 0x10
|
|
|
+#define SET_ATTN_BLINK 0x20
|
|
|
+#define SET_ATTN_OFF 0x30
|
|
|
+#define SETA_PCI_33MHZ 0x40 /* Set Bus Segment Speed/Mode A */
|
|
|
#define SETA_PCI_66MHZ 0x41
|
|
|
#define SETA_PCIX_66MHZ 0x42
|
|
|
#define SETA_PCIX_100MHZ 0x43
|
|
|
#define SETA_PCIX_133MHZ 0x44
|
|
|
-#define RESERV_1 0x45
|
|
|
-#define RESERV_2 0x46
|
|
|
-#define RESERV_3 0x47
|
|
|
-
|
|
|
-/* Set bus speed/mode B - 0x50h to 0x5fh */
|
|
|
-#define SETB_PCI_33MHZ 0x50
|
|
|
+#define SETA_RESERVED1 0x45
|
|
|
+#define SETA_RESERVED2 0x46
|
|
|
+#define SETA_RESERVED3 0x47
|
|
|
+#define SET_PWR_ONLY_ALL 0x48 /* Power-Only All Slots */
|
|
|
+#define SET_ENABLE_ALL 0x49 /* Enable All Slots */
|
|
|
+#define SETB_PCI_33MHZ 0x50 /* Set Bus Segment Speed/Mode B */
|
|
|
#define SETB_PCI_66MHZ 0x51
|
|
|
#define SETB_PCIX_66MHZ_PM 0x52
|
|
|
#define SETB_PCIX_100MHZ_PM 0x53
|
|
@@ -174,81 +191,115 @@
|
|
|
#define SETB_PCIX_66MHZ_533 0x5b
|
|
|
#define SETB_PCIX_100MHZ_533 0x5c
|
|
|
#define SETB_PCIX_133MHZ_533 0x5d
|
|
|
+#define SETB_RESERVED1 0x5e
|
|
|
+#define SETB_RESERVED2 0x5f
|
|
|
|
|
|
-
|
|
|
-/* Power-on all slots - 0x48h */
|
|
|
-#define SET_PWR_ON_ALL 0x48
|
|
|
-
|
|
|
-/* Enable all slots - 0x49h */
|
|
|
-#define SET_ENABLE_ALL 0x49
|
|
|
-
|
|
|
-/* SHPC controller command error code */
|
|
|
+/*
|
|
|
+ * SHPC controller command error code
|
|
|
+ */
|
|
|
#define SWITCH_OPEN 0x1
|
|
|
#define INVALID_CMD 0x2
|
|
|
#define INVALID_SPEED_MODE 0x4
|
|
|
|
|
|
-/* For accessing SHPC Working Register Set */
|
|
|
+/*
|
|
|
+ * For accessing SHPC Working Register Set via PCI Configuration Space
|
|
|
+ */
|
|
|
#define DWORD_SELECT 0x2
|
|
|
#define DWORD_DATA 0x4
|
|
|
-#define BASE_OFFSET 0x0
|
|
|
|
|
|
/* Field Offset in Logical Slot Register - byte boundary */
|
|
|
#define SLOT_EVENT_LATCH 0x2
|
|
|
#define SLOT_SERR_INT_MASK 0x3
|
|
|
|
|
|
-static spinlock_t hpc_event_lock;
|
|
|
-
|
|
|
DEFINE_DBG_BUFFER /* Debug string buffer for entire HPC defined here */
|
|
|
static struct php_ctlr_state_s *php_ctlr_list_head; /* HPC state linked list */
|
|
|
static int ctlr_seq_num = 0; /* Controller sequenc # */
|
|
|
static spinlock_t list_lock;
|
|
|
|
|
|
-static irqreturn_t shpc_isr(int IRQ, void *dev_id, struct pt_regs *regs);
|
|
|
+static atomic_t shpchp_num_controllers = ATOMIC_INIT(0);
|
|
|
|
|
|
-static void start_int_poll_timer(struct php_ctlr_state_s *php_ctlr, int seconds);
|
|
|
+static irqreturn_t shpc_isr(int irq, void *dev_id, struct pt_regs *regs);
|
|
|
+static void start_int_poll_timer(struct php_ctlr_state_s *php_ctlr, int sec);
|
|
|
static int hpc_check_cmd_status(struct controller *ctrl);
|
|
|
|
|
|
-/* This is the interrupt polling timeout function. */
|
|
|
-static void int_poll_timeout(unsigned long lphp_ctlr)
|
|
|
+static inline u8 shpc_readb(struct controller *ctrl, int reg)
|
|
|
{
|
|
|
- struct php_ctlr_state_s *php_ctlr = (struct php_ctlr_state_s *)lphp_ctlr;
|
|
|
+ return readb(ctrl->hpc_ctlr_handle->creg + reg);
|
|
|
+}
|
|
|
|
|
|
- DBG_ENTER_ROUTINE
|
|
|
+static inline void shpc_writeb(struct controller *ctrl, int reg, u8 val)
|
|
|
+{
|
|
|
+ writeb(val, ctrl->hpc_ctlr_handle->creg + reg);
|
|
|
+}
|
|
|
|
|
|
- if ( !php_ctlr ) {
|
|
|
- err("%s: Invalid HPC controller handle!\n", __FUNCTION__);
|
|
|
- return;
|
|
|
- }
|
|
|
+static inline u16 shpc_readw(struct controller *ctrl, int reg)
|
|
|
+{
|
|
|
+ return readw(ctrl->hpc_ctlr_handle->creg + reg);
|
|
|
+}
|
|
|
|
|
|
- /* Poll for interrupt events. regs == NULL => polling */
|
|
|
- shpc_isr( 0, (void *)php_ctlr, NULL );
|
|
|
+static inline void shpc_writew(struct controller *ctrl, int reg, u16 val)
|
|
|
+{
|
|
|
+ writew(val, ctrl->hpc_ctlr_handle->creg + reg);
|
|
|
+}
|
|
|
|
|
|
- init_timer(&php_ctlr->int_poll_timer);
|
|
|
- if (!shpchp_poll_time)
|
|
|
- shpchp_poll_time = 2; /* reset timer to poll in 2 secs if user doesn't specify at module installation*/
|
|
|
+static inline u32 shpc_readl(struct controller *ctrl, int reg)
|
|
|
+{
|
|
|
+ return readl(ctrl->hpc_ctlr_handle->creg + reg);
|
|
|
+}
|
|
|
|
|
|
- start_int_poll_timer(php_ctlr, shpchp_poll_time);
|
|
|
-
|
|
|
- return;
|
|
|
+static inline void shpc_writel(struct controller *ctrl, int reg, u32 val)
|
|
|
+{
|
|
|
+ writel(val, ctrl->hpc_ctlr_handle->creg + reg);
|
|
|
}
|
|
|
|
|
|
-/* This function starts the interrupt polling timer. */
|
|
|
-static void start_int_poll_timer(struct php_ctlr_state_s *php_ctlr, int seconds)
|
|
|
+static inline int shpc_indirect_read(struct controller *ctrl, int index,
|
|
|
+ u32 *value)
|
|
|
{
|
|
|
- if (!php_ctlr) {
|
|
|
- err("%s: Invalid HPC controller handle!\n", __FUNCTION__);
|
|
|
- return;
|
|
|
- }
|
|
|
+ int rc;
|
|
|
+ u32 cap_offset = ctrl->cap_offset;
|
|
|
+ struct pci_dev *pdev = ctrl->pci_dev;
|
|
|
+
|
|
|
+ rc = pci_write_config_byte(pdev, cap_offset + DWORD_SELECT, index);
|
|
|
+ if (rc)
|
|
|
+ return rc;
|
|
|
+ return pci_read_config_dword(pdev, cap_offset + DWORD_DATA, value);
|
|
|
+}
|
|
|
+
|
|
|
+/*
|
|
|
+ * This is the interrupt polling timeout function.
|
|
|
+ */
|
|
|
+static void int_poll_timeout(unsigned long lphp_ctlr)
|
|
|
+{
|
|
|
+ struct php_ctlr_state_s *php_ctlr =
|
|
|
+ (struct php_ctlr_state_s *)lphp_ctlr;
|
|
|
+
|
|
|
+ DBG_ENTER_ROUTINE
|
|
|
+
|
|
|
+ /* Poll for interrupt events. regs == NULL => polling */
|
|
|
+ shpc_isr(0, php_ctlr->callback_instance_id, NULL);
|
|
|
+
|
|
|
+ init_timer(&php_ctlr->int_poll_timer);
|
|
|
+ if (!shpchp_poll_time)
|
|
|
+ shpchp_poll_time = 2; /* default polling interval is 2 sec */
|
|
|
|
|
|
- if ( ( seconds <= 0 ) || ( seconds > 60 ) )
|
|
|
- seconds = 2; /* Clamp to sane value */
|
|
|
+ start_int_poll_timer(php_ctlr, shpchp_poll_time);
|
|
|
|
|
|
- php_ctlr->int_poll_timer.function = &int_poll_timeout;
|
|
|
- php_ctlr->int_poll_timer.data = (unsigned long)php_ctlr; /* Instance data */
|
|
|
- php_ctlr->int_poll_timer.expires = jiffies + seconds * HZ;
|
|
|
- add_timer(&php_ctlr->int_poll_timer);
|
|
|
+ DBG_LEAVE_ROUTINE
|
|
|
+}
|
|
|
|
|
|
- return;
|
|
|
+/*
|
|
|
+ * This function starts the interrupt polling timer.
|
|
|
+ */
|
|
|
+static void start_int_poll_timer(struct php_ctlr_state_s *php_ctlr, int sec)
|
|
|
+{
|
|
|
+ /* Clamp to sane value */
|
|
|
+ if ((sec <= 0) || (sec > 60))
|
|
|
+ sec = 2;
|
|
|
+
|
|
|
+ php_ctlr->int_poll_timer.function = &int_poll_timeout;
|
|
|
+ php_ctlr->int_poll_timer.data = (unsigned long)php_ctlr;
|
|
|
+ php_ctlr->int_poll_timer.expires = jiffies + sec * HZ;
|
|
|
+ add_timer(&php_ctlr->int_poll_timer);
|
|
|
}
|
|
|
|
|
|
static inline int shpc_wait_cmd(struct controller *ctrl)
|
|
@@ -272,7 +323,7 @@ static inline int shpc_wait_cmd(struct controller *ctrl)
|
|
|
|
|
|
static int shpc_write_cmd(struct slot *slot, u8 t_slot, u8 cmd)
|
|
|
{
|
|
|
- struct php_ctlr_state_s *php_ctlr = slot->ctrl->hpc_ctlr_handle;
|
|
|
+ struct controller *ctrl = slot->ctrl;
|
|
|
u16 cmd_status;
|
|
|
int retval = 0;
|
|
|
u16 temp_word;
|
|
@@ -282,14 +333,8 @@ static int shpc_write_cmd(struct slot *slot, u8 t_slot, u8 cmd)
|
|
|
|
|
|
mutex_lock(&slot->ctrl->cmd_lock);
|
|
|
|
|
|
- if (!php_ctlr) {
|
|
|
- err("%s: Invalid HPC controller handle!\n", __FUNCTION__);
|
|
|
- retval = -EINVAL;
|
|
|
- goto out;
|
|
|
- }
|
|
|
-
|
|
|
for (i = 0; i < 10; i++) {
|
|
|
- cmd_status = readw(php_ctlr->creg + CMD_STATUS);
|
|
|
+ cmd_status = shpc_readw(ctrl, CMD_STATUS);
|
|
|
|
|
|
if (!(cmd_status & 0x1))
|
|
|
break;
|
|
@@ -297,7 +342,7 @@ static int shpc_write_cmd(struct slot *slot, u8 t_slot, u8 cmd)
|
|
|
msleep(100);
|
|
|
}
|
|
|
|
|
|
- cmd_status = readw(php_ctlr->creg + CMD_STATUS);
|
|
|
+ cmd_status = shpc_readw(ctrl, CMD_STATUS);
|
|
|
|
|
|
if (cmd_status & 0x1) {
|
|
|
/* After 1 sec and and the controller is still busy */
|
|
@@ -314,7 +359,7 @@ static int shpc_write_cmd(struct slot *slot, u8 t_slot, u8 cmd)
|
|
|
* command.
|
|
|
*/
|
|
|
slot->ctrl->cmd_busy = 1;
|
|
|
- writew(temp_word, php_ctlr->creg + CMD);
|
|
|
+ shpc_writew(ctrl, CMD, temp_word);
|
|
|
|
|
|
/*
|
|
|
* Wait for command completion.
|
|
@@ -338,18 +383,12 @@ static int shpc_write_cmd(struct slot *slot, u8 t_slot, u8 cmd)
|
|
|
|
|
|
static int hpc_check_cmd_status(struct controller *ctrl)
|
|
|
{
|
|
|
- struct php_ctlr_state_s *php_ctlr = ctrl->hpc_ctlr_handle;
|
|
|
u16 cmd_status;
|
|
|
int retval = 0;
|
|
|
|
|
|
DBG_ENTER_ROUTINE
|
|
|
-
|
|
|
- if (!ctrl->hpc_ctlr_handle) {
|
|
|
- err("%s: Invalid HPC controller handle!\n", __FUNCTION__);
|
|
|
- return -1;
|
|
|
- }
|
|
|
|
|
|
- cmd_status = readw(php_ctlr->creg + CMD_STATUS) & 0x000F;
|
|
|
+ cmd_status = shpc_readw(ctrl, CMD_STATUS) & 0x000F;
|
|
|
|
|
|
switch (cmd_status >> 1) {
|
|
|
case 0:
|
|
@@ -378,37 +417,27 @@ static int hpc_check_cmd_status(struct controller *ctrl)
|
|
|
|
|
|
static int hpc_get_attention_status(struct slot *slot, u8 *status)
|
|
|
{
|
|
|
- struct php_ctlr_state_s *php_ctlr = slot->ctrl->hpc_ctlr_handle;
|
|
|
+ struct controller *ctrl = slot->ctrl;
|
|
|
u32 slot_reg;
|
|
|
- u16 slot_status;
|
|
|
- u8 atten_led_state;
|
|
|
+ u8 state;
|
|
|
|
|
|
DBG_ENTER_ROUTINE
|
|
|
|
|
|
- if (!slot->ctrl->hpc_ctlr_handle) {
|
|
|
- err("%s: Invalid HPC controller handle!\n", __FUNCTION__);
|
|
|
- return -1;
|
|
|
- }
|
|
|
-
|
|
|
- slot_reg = readl(php_ctlr->creg + SLOT1 + 4*(slot->hp_slot));
|
|
|
- slot_status = (u16) slot_reg;
|
|
|
- atten_led_state = (slot_status & 0x0030) >> 4;
|
|
|
+ slot_reg = shpc_readl(ctrl, SLOT_REG(slot->hp_slot));
|
|
|
+ state = (slot_reg & ATN_LED_STATE_MASK) >> ATN_LED_STATE_SHIFT;
|
|
|
|
|
|
- switch (atten_led_state) {
|
|
|
- case 0:
|
|
|
- *status = 0xFF; /* Reserved */
|
|
|
- break;
|
|
|
- case 1:
|
|
|
+ switch (state) {
|
|
|
+ case ATN_LED_STATE_ON:
|
|
|
*status = 1; /* On */
|
|
|
break;
|
|
|
- case 2:
|
|
|
+ case ATN_LED_STATE_BLINK:
|
|
|
*status = 2; /* Blink */
|
|
|
break;
|
|
|
- case 3:
|
|
|
+ case ATN_LED_STATE_OFF:
|
|
|
*status = 0; /* Off */
|
|
|
break;
|
|
|
default:
|
|
|
- *status = 0xFF;
|
|
|
+ *status = 0xFF; /* Reserved */
|
|
|
break;
|
|
|
}
|
|
|
|
|
@@ -418,64 +447,44 @@ static int hpc_get_attention_status(struct slot *slot, u8 *status)
|
|
|
|
|
|
static int hpc_get_power_status(struct slot * slot, u8 *status)
|
|
|
{
|
|
|
- struct php_ctlr_state_s *php_ctlr = slot->ctrl->hpc_ctlr_handle;
|
|
|
+ struct controller *ctrl = slot->ctrl;
|
|
|
u32 slot_reg;
|
|
|
- u16 slot_status;
|
|
|
- u8 slot_state;
|
|
|
- int retval = 0;
|
|
|
+ u8 state;
|
|
|
|
|
|
DBG_ENTER_ROUTINE
|
|
|
|
|
|
- if (!slot->ctrl->hpc_ctlr_handle) {
|
|
|
- err("%s: Invalid HPC controller handle!\n", __FUNCTION__);
|
|
|
- return -1;
|
|
|
- }
|
|
|
-
|
|
|
- slot_reg = readl(php_ctlr->creg + SLOT1 + 4*(slot->hp_slot));
|
|
|
- slot_status = (u16) slot_reg;
|
|
|
- slot_state = (slot_status & 0x0003);
|
|
|
+ slot_reg = shpc_readl(ctrl, SLOT_REG(slot->hp_slot));
|
|
|
+ state = (slot_reg & SLOT_STATE_MASK) >> SLOT_STATE_SHIFT;
|
|
|
|
|
|
- switch (slot_state) {
|
|
|
- case 0:
|
|
|
- *status = 0xFF;
|
|
|
- break;
|
|
|
- case 1:
|
|
|
+ switch (state) {
|
|
|
+ case SLOT_STATE_PWRONLY:
|
|
|
*status = 2; /* Powered only */
|
|
|
break;
|
|
|
- case 2:
|
|
|
+ case SLOT_STATE_ENABLED:
|
|
|
*status = 1; /* Enabled */
|
|
|
break;
|
|
|
- case 3:
|
|
|
+ case SLOT_STATE_DISABLED:
|
|
|
*status = 0; /* Disabled */
|
|
|
break;
|
|
|
default:
|
|
|
- *status = 0xFF;
|
|
|
+ *status = 0xFF; /* Reserved */
|
|
|
break;
|
|
|
}
|
|
|
|
|
|
DBG_LEAVE_ROUTINE
|
|
|
- return retval;
|
|
|
+ return 0;
|
|
|
}
|
|
|
|
|
|
|
|
|
static int hpc_get_latch_status(struct slot *slot, u8 *status)
|
|
|
{
|
|
|
- struct php_ctlr_state_s *php_ctlr = slot->ctrl->hpc_ctlr_handle;
|
|
|
+ struct controller *ctrl = slot->ctrl;
|
|
|
u32 slot_reg;
|
|
|
- u16 slot_status;
|
|
|
|
|
|
DBG_ENTER_ROUTINE
|
|
|
|
|
|
- if (!slot->ctrl->hpc_ctlr_handle) {
|
|
|
- err("%s: Invalid HPC controller handle!\n", __FUNCTION__);
|
|
|
- return -1;
|
|
|
- }
|
|
|
-
|
|
|
- slot_reg = readl(php_ctlr->creg + SLOT1 + 4*(slot->hp_slot));
|
|
|
- slot_status = (u16)slot_reg;
|
|
|
-
|
|
|
- *status = ((slot_status & 0x0100) == 0) ? 0 : 1; /* 0 -> close; 1 -> open */
|
|
|
-
|
|
|
+ slot_reg = shpc_readl(ctrl, SLOT_REG(slot->hp_slot));
|
|
|
+ *status = !!(slot_reg & MRL_SENSOR); /* 0 -> close; 1 -> open */
|
|
|
|
|
|
DBG_LEAVE_ROUTINE
|
|
|
return 0;
|
|
@@ -483,22 +492,15 @@ static int hpc_get_latch_status(struct slot *slot, u8 *status)
|
|
|
|
|
|
static int hpc_get_adapter_status(struct slot *slot, u8 *status)
|
|
|
{
|
|
|
- struct php_ctlr_state_s *php_ctlr = slot->ctrl->hpc_ctlr_handle;
|
|
|
+ struct controller *ctrl = slot->ctrl;
|
|
|
u32 slot_reg;
|
|
|
- u16 slot_status;
|
|
|
- u8 card_state;
|
|
|
+ u8 state;
|
|
|
|
|
|
DBG_ENTER_ROUTINE
|
|
|
|
|
|
- if (!slot->ctrl->hpc_ctlr_handle) {
|
|
|
- err("%s: Invalid HPC controller handle!\n", __FUNCTION__);
|
|
|
- return -1;
|
|
|
- }
|
|
|
-
|
|
|
- slot_reg = readl(php_ctlr->creg + SLOT1 + 4*(slot->hp_slot));
|
|
|
- slot_status = (u16)slot_reg;
|
|
|
- card_state = (u8)((slot_status & 0x0C00) >> 10);
|
|
|
- *status = (card_state != 0x3) ? 1 : 0;
|
|
|
+ slot_reg = shpc_readl(ctrl, SLOT_REG(slot->hp_slot));
|
|
|
+ state = (slot_reg & PRSNT_MASK) >> PRSNT_SHIFT;
|
|
|
+ *status = (state != 0x3) ? 1 : 0;
|
|
|
|
|
|
DBG_LEAVE_ROUTINE
|
|
|
return 0;
|
|
@@ -506,16 +508,11 @@ static int hpc_get_adapter_status(struct slot *slot, u8 *status)
|
|
|
|
|
|
static int hpc_get_prog_int(struct slot *slot, u8 *prog_int)
|
|
|
{
|
|
|
- struct php_ctlr_state_s *php_ctlr = slot->ctrl->hpc_ctlr_handle;
|
|
|
+ struct controller *ctrl = slot->ctrl;
|
|
|
|
|
|
DBG_ENTER_ROUTINE
|
|
|
-
|
|
|
- if (!slot->ctrl->hpc_ctlr_handle) {
|
|
|
- err("%s: Invalid HPC controller handle!\n", __FUNCTION__);
|
|
|
- return -1;
|
|
|
- }
|
|
|
|
|
|
- *prog_int = readb(php_ctlr->creg + PROG_INTERFACE);
|
|
|
+ *prog_int = shpc_readb(ctrl, PROG_INTERFACE);
|
|
|
|
|
|
DBG_LEAVE_ROUTINE
|
|
|
return 0;
|
|
@@ -524,13 +521,27 @@ static int hpc_get_prog_int(struct slot *slot, u8 *prog_int)
|
|
|
static int hpc_get_adapter_speed(struct slot *slot, enum pci_bus_speed *value)
|
|
|
{
|
|
|
int retval = 0;
|
|
|
- struct php_ctlr_state_s *php_ctlr = slot->ctrl->hpc_ctlr_handle;
|
|
|
- u32 slot_reg = readl(php_ctlr->creg + SLOT1 + 4 * slot->hp_slot);
|
|
|
- u8 pcix_cap = (slot_reg >> 12) & 7;
|
|
|
- u8 m66_cap = (slot_reg >> 9) & 1;
|
|
|
+ struct controller *ctrl = slot->ctrl;
|
|
|
+ u32 slot_reg = shpc_readl(ctrl, SLOT_REG(slot->hp_slot));
|
|
|
+ u8 m66_cap = !!(slot_reg & MHZ66_CAP);
|
|
|
+ u8 pi, pcix_cap;
|
|
|
|
|
|
DBG_ENTER_ROUTINE
|
|
|
|
|
|
+ if ((retval = hpc_get_prog_int(slot, &pi)))
|
|
|
+ return retval;
|
|
|
+
|
|
|
+ switch (pi) {
|
|
|
+ case 1:
|
|
|
+ pcix_cap = (slot_reg & PCIX_CAP_MASK_PI1) >> PCIX_CAP_SHIFT;
|
|
|
+ break;
|
|
|
+ case 2:
|
|
|
+ pcix_cap = (slot_reg & PCIX_CAP_MASK_PI2) >> PCIX_CAP_SHIFT;
|
|
|
+ break;
|
|
|
+ default:
|
|
|
+ return -ENODEV;
|
|
|
+ }
|
|
|
+
|
|
|
dbg("%s: slot_reg = %x, pcix_cap = %x, m66_cap = %x\n",
|
|
|
__FUNCTION__, slot_reg, pcix_cap, m66_cap);
|
|
|
|
|
@@ -564,20 +575,15 @@ static int hpc_get_adapter_speed(struct slot *slot, enum pci_bus_speed *value)
|
|
|
|
|
|
static int hpc_get_mode1_ECC_cap(struct slot *slot, u8 *mode)
|
|
|
{
|
|
|
- struct php_ctlr_state_s *php_ctlr = slot->ctrl->hpc_ctlr_handle;
|
|
|
+ struct controller *ctrl = slot->ctrl;
|
|
|
u16 sec_bus_status;
|
|
|
u8 pi;
|
|
|
int retval = 0;
|
|
|
|
|
|
DBG_ENTER_ROUTINE
|
|
|
|
|
|
- if (!slot->ctrl->hpc_ctlr_handle) {
|
|
|
- err("%s: Invalid HPC controller handle!\n", __FUNCTION__);
|
|
|
- return -1;
|
|
|
- }
|
|
|
-
|
|
|
- pi = readb(php_ctlr->creg + PROG_INTERFACE);
|
|
|
- sec_bus_status = readw(php_ctlr->creg + SEC_BUS_CONFIG);
|
|
|
+ pi = shpc_readb(ctrl, PROG_INTERFACE);
|
|
|
+ sec_bus_status = shpc_readw(ctrl, SEC_BUS_CONFIG);
|
|
|
|
|
|
if (pi == 2) {
|
|
|
*mode = (sec_bus_status & 0x0100) >> 8;
|
|
@@ -593,128 +599,53 @@ static int hpc_get_mode1_ECC_cap(struct slot *slot, u8 *mode)
|
|
|
|
|
|
static int hpc_query_power_fault(struct slot * slot)
|
|
|
{
|
|
|
- struct php_ctlr_state_s *php_ctlr = slot->ctrl->hpc_ctlr_handle;
|
|
|
+ struct controller *ctrl = slot->ctrl;
|
|
|
u32 slot_reg;
|
|
|
- u16 slot_status;
|
|
|
- u8 pwr_fault_state, status;
|
|
|
|
|
|
DBG_ENTER_ROUTINE
|
|
|
|
|
|
- if (!slot->ctrl->hpc_ctlr_handle) {
|
|
|
- err("%s: Invalid HPC controller handle!\n", __FUNCTION__);
|
|
|
- return -1;
|
|
|
- }
|
|
|
-
|
|
|
- slot_reg = readl(php_ctlr->creg + SLOT1 + 4*(slot->hp_slot));
|
|
|
- slot_status = (u16) slot_reg;
|
|
|
- pwr_fault_state = (slot_status & 0x0040) >> 7;
|
|
|
- status = (pwr_fault_state == 1) ? 0 : 1;
|
|
|
+ slot_reg = shpc_readl(ctrl, SLOT_REG(slot->hp_slot));
|
|
|
|
|
|
DBG_LEAVE_ROUTINE
|
|
|
/* Note: Logic 0 => fault */
|
|
|
- return status;
|
|
|
+ return !(slot_reg & POWER_FAULT);
|
|
|
}
|
|
|
|
|
|
static int hpc_set_attention_status(struct slot *slot, u8 value)
|
|
|
{
|
|
|
- struct php_ctlr_state_s *php_ctlr = slot->ctrl->hpc_ctlr_handle;
|
|
|
u8 slot_cmd = 0;
|
|
|
- int rc = 0;
|
|
|
-
|
|
|
- if (!slot->ctrl->hpc_ctlr_handle) {
|
|
|
- err("%s: Invalid HPC controller handle!\n", __FUNCTION__);
|
|
|
- return -1;
|
|
|
- }
|
|
|
-
|
|
|
- if (slot->hp_slot >= php_ctlr->num_slots) {
|
|
|
- err("%s: Invalid HPC slot number!\n", __FUNCTION__);
|
|
|
- return -1;
|
|
|
- }
|
|
|
|
|
|
switch (value) {
|
|
|
case 0 :
|
|
|
- slot_cmd = 0x30; /* OFF */
|
|
|
+ slot_cmd = SET_ATTN_OFF; /* OFF */
|
|
|
break;
|
|
|
case 1:
|
|
|
- slot_cmd = 0x10; /* ON */
|
|
|
+ slot_cmd = SET_ATTN_ON; /* ON */
|
|
|
break;
|
|
|
case 2:
|
|
|
- slot_cmd = 0x20; /* BLINK */
|
|
|
+ slot_cmd = SET_ATTN_BLINK; /* BLINK */
|
|
|
break;
|
|
|
default:
|
|
|
return -1;
|
|
|
}
|
|
|
|
|
|
- shpc_write_cmd(slot, slot->hp_slot, slot_cmd);
|
|
|
-
|
|
|
- return rc;
|
|
|
+ return shpc_write_cmd(slot, slot->hp_slot, slot_cmd);
|
|
|
}
|
|
|
|
|
|
|
|
|
static void hpc_set_green_led_on(struct slot *slot)
|
|
|
{
|
|
|
- struct php_ctlr_state_s *php_ctlr = slot->ctrl->hpc_ctlr_handle;
|
|
|
- u8 slot_cmd;
|
|
|
-
|
|
|
- if (!slot->ctrl->hpc_ctlr_handle) {
|
|
|
- err("%s: Invalid HPC controller handle!\n", __FUNCTION__);
|
|
|
- return ;
|
|
|
- }
|
|
|
-
|
|
|
- if (slot->hp_slot >= php_ctlr->num_slots) {
|
|
|
- err("%s: Invalid HPC slot number!\n", __FUNCTION__);
|
|
|
- return ;
|
|
|
- }
|
|
|
-
|
|
|
- slot_cmd = 0x04;
|
|
|
-
|
|
|
- shpc_write_cmd(slot, slot->hp_slot, slot_cmd);
|
|
|
-
|
|
|
- return;
|
|
|
+ shpc_write_cmd(slot, slot->hp_slot, SET_PWR_ON);
|
|
|
}
|
|
|
|
|
|
static void hpc_set_green_led_off(struct slot *slot)
|
|
|
{
|
|
|
- struct php_ctlr_state_s *php_ctlr = slot->ctrl->hpc_ctlr_handle;
|
|
|
- u8 slot_cmd;
|
|
|
-
|
|
|
- if (!slot->ctrl->hpc_ctlr_handle) {
|
|
|
- err("%s: Invalid HPC controller handle!\n", __FUNCTION__);
|
|
|
- return ;
|
|
|
- }
|
|
|
-
|
|
|
- if (slot->hp_slot >= php_ctlr->num_slots) {
|
|
|
- err("%s: Invalid HPC slot number!\n", __FUNCTION__);
|
|
|
- return ;
|
|
|
- }
|
|
|
-
|
|
|
- slot_cmd = 0x0C;
|
|
|
-
|
|
|
- shpc_write_cmd(slot, slot->hp_slot, slot_cmd);
|
|
|
-
|
|
|
- return;
|
|
|
+ shpc_write_cmd(slot, slot->hp_slot, SET_PWR_OFF);
|
|
|
}
|
|
|
|
|
|
static void hpc_set_green_led_blink(struct slot *slot)
|
|
|
{
|
|
|
- struct php_ctlr_state_s *php_ctlr = slot->ctrl->hpc_ctlr_handle;
|
|
|
- u8 slot_cmd;
|
|
|
-
|
|
|
- if (!slot->ctrl->hpc_ctlr_handle) {
|
|
|
- err("%s: Invalid HPC controller handle!\n", __FUNCTION__);
|
|
|
- return ;
|
|
|
- }
|
|
|
-
|
|
|
- if (slot->hp_slot >= php_ctlr->num_slots) {
|
|
|
- err("%s: Invalid HPC slot number!\n", __FUNCTION__);
|
|
|
- return ;
|
|
|
- }
|
|
|
-
|
|
|
- slot_cmd = 0x08;
|
|
|
-
|
|
|
- shpc_write_cmd(slot, slot->hp_slot, slot_cmd);
|
|
|
-
|
|
|
- return;
|
|
|
+ shpc_write_cmd(slot, slot->hp_slot, SET_PWR_BLINK);
|
|
|
}
|
|
|
|
|
|
int shpc_get_ctlr_slot_config(struct controller *ctrl,
|
|
@@ -724,21 +655,17 @@ int shpc_get_ctlr_slot_config(struct controller *ctrl,
|
|
|
int *updown, /* physical_slot_num increament: 1 or -1 */
|
|
|
int *flags)
|
|
|
{
|
|
|
- struct php_ctlr_state_s *php_ctlr = ctrl->hpc_ctlr_handle;
|
|
|
+ u32 slot_config;
|
|
|
|
|
|
DBG_ENTER_ROUTINE
|
|
|
|
|
|
- if (!ctrl->hpc_ctlr_handle) {
|
|
|
- err("%s: Invalid HPC controller handle!\n", __FUNCTION__);
|
|
|
- return -1;
|
|
|
- }
|
|
|
-
|
|
|
- *first_device_num = php_ctlr->slot_device_offset; /* Obtained in shpc_init() */
|
|
|
- *num_ctlr_slots = php_ctlr->num_slots; /* Obtained in shpc_init() */
|
|
|
+ slot_config = shpc_readl(ctrl, SLOT_CONFIG);
|
|
|
+ *first_device_num = (slot_config & FIRST_DEV_NUM) >> 8;
|
|
|
+ *num_ctlr_slots = slot_config & SLOT_NUM;
|
|
|
+ *physical_slot_num = (slot_config & PSN) >> 16;
|
|
|
+ *updown = ((slot_config & UPDOWN) >> 29) ? 1 : -1;
|
|
|
|
|
|
- *physical_slot_num = (readl(php_ctlr->creg + SLOT_CONFIG) & PSN) >> 16;
|
|
|
dbg("%s: physical_slot_num = %x\n", __FUNCTION__, *physical_slot_num);
|
|
|
- *updown = ((readl(php_ctlr->creg + SLOT_CONFIG) & UPDOWN ) >> 29) ? 1 : -1;
|
|
|
|
|
|
DBG_LEAVE_ROUTINE
|
|
|
return 0;
|
|
@@ -749,22 +676,34 @@ static void hpc_release_ctlr(struct controller *ctrl)
|
|
|
struct php_ctlr_state_s *php_ctlr = ctrl->hpc_ctlr_handle;
|
|
|
struct php_ctlr_state_s *p, *p_prev;
|
|
|
int i;
|
|
|
+ u32 slot_reg, serr_int;
|
|
|
|
|
|
DBG_ENTER_ROUTINE
|
|
|
|
|
|
- if (!ctrl->hpc_ctlr_handle) {
|
|
|
- err("%s: Invalid HPC controller handle!\n", __FUNCTION__);
|
|
|
- return ;
|
|
|
- }
|
|
|
-
|
|
|
/*
|
|
|
- * Mask all slot event interrupts
|
|
|
+ * Mask event interrupts and SERRs of all slots
|
|
|
*/
|
|
|
- for (i = 0; i < ctrl->num_slots; i++)
|
|
|
- writel(0xffff3fff, php_ctlr->creg + SLOT1 + (4 * i));
|
|
|
+ for (i = 0; i < ctrl->num_slots; i++) {
|
|
|
+ slot_reg = shpc_readl(ctrl, SLOT_REG(i));
|
|
|
+ slot_reg |= (PRSNT_CHANGE_INTR_MASK | ISO_PFAULT_INTR_MASK |
|
|
|
+ BUTTON_PRESS_INTR_MASK | MRL_CHANGE_INTR_MASK |
|
|
|
+ CON_PFAULT_INTR_MASK | MRL_CHANGE_SERR_MASK |
|
|
|
+ CON_PFAULT_SERR_MASK);
|
|
|
+ slot_reg &= ~SLOT_REG_RSVDZ_MASK;
|
|
|
+ shpc_writel(ctrl, SLOT_REG(i), slot_reg);
|
|
|
+ }
|
|
|
|
|
|
cleanup_slots(ctrl);
|
|
|
|
|
|
+ /*
|
|
|
+ * Mask SERR and System Interrut generation
|
|
|
+ */
|
|
|
+ serr_int = shpc_readl(ctrl, SERR_INTR_ENABLE);
|
|
|
+ serr_int |= (GLOBAL_INTR_MASK | GLOBAL_SERR_MASK |
|
|
|
+ COMMAND_INTR_MASK | ARBITER_SERR_MASK);
|
|
|
+ serr_int &= ~SERR_INTR_RSVDZ_MASK;
|
|
|
+ shpc_writel(ctrl, SERR_INTR_ENABLE, serr_int);
|
|
|
+
|
|
|
if (shpchp_poll_mode) {
|
|
|
del_timer(&php_ctlr->int_poll_timer);
|
|
|
} else {
|
|
@@ -800,113 +739,79 @@ static void hpc_release_ctlr(struct controller *ctrl)
|
|
|
|
|
|
kfree(php_ctlr);
|
|
|
|
|
|
+ /*
|
|
|
+ * If this is the last controller to be released, destroy the
|
|
|
+ * shpchpd work queue
|
|
|
+ */
|
|
|
+ if (atomic_dec_and_test(&shpchp_num_controllers))
|
|
|
+ destroy_workqueue(shpchp_wq);
|
|
|
+
|
|
|
DBG_LEAVE_ROUTINE
|
|
|
|
|
|
}
|
|
|
|
|
|
static int hpc_power_on_slot(struct slot * slot)
|
|
|
{
|
|
|
- struct php_ctlr_state_s *php_ctlr = slot->ctrl->hpc_ctlr_handle;
|
|
|
- u8 slot_cmd;
|
|
|
- int retval = 0;
|
|
|
+ int retval;
|
|
|
|
|
|
DBG_ENTER_ROUTINE
|
|
|
|
|
|
- if (!slot->ctrl->hpc_ctlr_handle) {
|
|
|
- err("%s: Invalid HPC controller handle!\n", __FUNCTION__);
|
|
|
- return -1;
|
|
|
- }
|
|
|
-
|
|
|
- if (slot->hp_slot >= php_ctlr->num_slots) {
|
|
|
- err("%s: Invalid HPC slot number!\n", __FUNCTION__);
|
|
|
- return -1;
|
|
|
- }
|
|
|
- slot_cmd = 0x01;
|
|
|
-
|
|
|
- retval = shpc_write_cmd(slot, slot->hp_slot, slot_cmd);
|
|
|
-
|
|
|
+ retval = shpc_write_cmd(slot, slot->hp_slot, SET_SLOT_PWR);
|
|
|
if (retval) {
|
|
|
err("%s: Write command failed!\n", __FUNCTION__);
|
|
|
- return -1;
|
|
|
+ return retval;
|
|
|
}
|
|
|
|
|
|
DBG_LEAVE_ROUTINE
|
|
|
|
|
|
- return retval;
|
|
|
+ return 0;
|
|
|
}
|
|
|
|
|
|
static int hpc_slot_enable(struct slot * slot)
|
|
|
{
|
|
|
- struct php_ctlr_state_s *php_ctlr = slot->ctrl->hpc_ctlr_handle;
|
|
|
- u8 slot_cmd;
|
|
|
- int retval = 0;
|
|
|
+ int retval;
|
|
|
|
|
|
DBG_ENTER_ROUTINE
|
|
|
|
|
|
- if (!slot->ctrl->hpc_ctlr_handle) {
|
|
|
- err("%s: Invalid HPC controller handle!\n", __FUNCTION__);
|
|
|
- return -1;
|
|
|
- }
|
|
|
-
|
|
|
- if (slot->hp_slot >= php_ctlr->num_slots) {
|
|
|
- err("%s: Invalid HPC slot number!\n", __FUNCTION__);
|
|
|
- return -1;
|
|
|
- }
|
|
|
- /* 3A => Slot - Enable, Power Indicator - Blink, Attention Indicator - Off */
|
|
|
- slot_cmd = 0x3A;
|
|
|
-
|
|
|
- retval = shpc_write_cmd(slot, slot->hp_slot, slot_cmd);
|
|
|
-
|
|
|
+ /* Slot - Enable, Power Indicator - Blink, Attention Indicator - Off */
|
|
|
+ retval = shpc_write_cmd(slot, slot->hp_slot,
|
|
|
+ SET_SLOT_ENABLE | SET_PWR_BLINK | SET_ATTN_OFF);
|
|
|
if (retval) {
|
|
|
err("%s: Write command failed!\n", __FUNCTION__);
|
|
|
- return -1;
|
|
|
+ return retval;
|
|
|
}
|
|
|
|
|
|
DBG_LEAVE_ROUTINE
|
|
|
- return retval;
|
|
|
+ return 0;
|
|
|
}
|
|
|
|
|
|
static int hpc_slot_disable(struct slot * slot)
|
|
|
{
|
|
|
- struct php_ctlr_state_s *php_ctlr = slot->ctrl->hpc_ctlr_handle;
|
|
|
- u8 slot_cmd;
|
|
|
- int retval = 0;
|
|
|
+ int retval;
|
|
|
|
|
|
DBG_ENTER_ROUTINE
|
|
|
|
|
|
- if (!slot->ctrl->hpc_ctlr_handle) {
|
|
|
- err("%s: Invalid HPC controller handle!\n", __FUNCTION__);
|
|
|
- return -1;
|
|
|
- }
|
|
|
-
|
|
|
- if (slot->hp_slot >= php_ctlr->num_slots) {
|
|
|
- err("%s: Invalid HPC slot number!\n", __FUNCTION__);
|
|
|
- return -1;
|
|
|
- }
|
|
|
-
|
|
|
- /* 1F => Slot - Disable, Power Indicator - Off, Attention Indicator - On */
|
|
|
- slot_cmd = 0x1F;
|
|
|
-
|
|
|
- retval = shpc_write_cmd(slot, slot->hp_slot, slot_cmd);
|
|
|
-
|
|
|
+ /* Slot - Disable, Power Indicator - Off, Attention Indicator - On */
|
|
|
+ retval = shpc_write_cmd(slot, slot->hp_slot,
|
|
|
+ SET_SLOT_DISABLE | SET_PWR_OFF | SET_ATTN_ON);
|
|
|
if (retval) {
|
|
|
err("%s: Write command failed!\n", __FUNCTION__);
|
|
|
- return -1;
|
|
|
+ return retval;
|
|
|
}
|
|
|
|
|
|
DBG_LEAVE_ROUTINE
|
|
|
- return retval;
|
|
|
+ return 0;
|
|
|
}
|
|
|
|
|
|
static int hpc_set_bus_speed_mode(struct slot * slot, enum pci_bus_speed value)
|
|
|
{
|
|
|
int retval;
|
|
|
- struct php_ctlr_state_s *php_ctlr = slot->ctrl->hpc_ctlr_handle;
|
|
|
+ struct controller *ctrl = slot->ctrl;
|
|
|
u8 pi, cmd;
|
|
|
|
|
|
DBG_ENTER_ROUTINE
|
|
|
|
|
|
- pi = readb(php_ctlr->creg + PROG_INTERFACE);
|
|
|
+ pi = shpc_readb(ctrl, PROG_INTERFACE);
|
|
|
if ((pi == 1) && (value > PCI_SPEED_133MHz_PCIX))
|
|
|
return -EINVAL;
|
|
|
|
|
@@ -965,100 +870,86 @@ static int hpc_set_bus_speed_mode(struct slot * slot, enum pci_bus_speed value)
|
|
|
return retval;
|
|
|
}
|
|
|
|
|
|
-static irqreturn_t shpc_isr(int IRQ, void *dev_id, struct pt_regs *regs)
|
|
|
+static irqreturn_t shpc_isr(int irq, void *dev_id, struct pt_regs *regs)
|
|
|
{
|
|
|
- struct controller *ctrl = NULL;
|
|
|
- struct php_ctlr_state_s *php_ctlr;
|
|
|
- u8 schedule_flag = 0;
|
|
|
- u8 temp_byte;
|
|
|
- u32 temp_dword, intr_loc, intr_loc2;
|
|
|
+ struct controller *ctrl = (struct controller *)dev_id;
|
|
|
+ struct php_ctlr_state_s *php_ctlr = ctrl->hpc_ctlr_handle;
|
|
|
+ u32 serr_int, slot_reg, intr_loc, intr_loc2;
|
|
|
int hp_slot;
|
|
|
|
|
|
- if (!dev_id)
|
|
|
- return IRQ_NONE;
|
|
|
-
|
|
|
- if (!shpchp_poll_mode) {
|
|
|
- ctrl = (struct controller *)dev_id;
|
|
|
- php_ctlr = ctrl->hpc_ctlr_handle;
|
|
|
- } else {
|
|
|
- php_ctlr = (struct php_ctlr_state_s *) dev_id;
|
|
|
- ctrl = (struct controller *)php_ctlr->callback_instance_id;
|
|
|
- }
|
|
|
-
|
|
|
- if (!ctrl)
|
|
|
- return IRQ_NONE;
|
|
|
-
|
|
|
- if (!php_ctlr || !php_ctlr->creg)
|
|
|
- return IRQ_NONE;
|
|
|
-
|
|
|
/* Check to see if it was our interrupt */
|
|
|
- intr_loc = readl(php_ctlr->creg + INTR_LOC);
|
|
|
-
|
|
|
+ intr_loc = shpc_readl(ctrl, INTR_LOC);
|
|
|
if (!intr_loc)
|
|
|
return IRQ_NONE;
|
|
|
+
|
|
|
dbg("%s: intr_loc = %x\n",__FUNCTION__, intr_loc);
|
|
|
|
|
|
if(!shpchp_poll_mode) {
|
|
|
- /* Mask Global Interrupt Mask - see implementation note on p. 139 */
|
|
|
- /* of SHPC spec rev 1.0*/
|
|
|
- temp_dword = readl(php_ctlr->creg + SERR_INTR_ENABLE);
|
|
|
- temp_dword |= 0x00000001;
|
|
|
- writel(temp_dword, php_ctlr->creg + SERR_INTR_ENABLE);
|
|
|
+ /*
|
|
|
+ * Mask Global Interrupt Mask - see implementation
|
|
|
+ * note on p. 139 of SHPC spec rev 1.0
|
|
|
+ */
|
|
|
+ serr_int = shpc_readl(ctrl, SERR_INTR_ENABLE);
|
|
|
+ serr_int |= GLOBAL_INTR_MASK;
|
|
|
+ serr_int &= ~SERR_INTR_RSVDZ_MASK;
|
|
|
+ shpc_writel(ctrl, SERR_INTR_ENABLE, serr_int);
|
|
|
|
|
|
- intr_loc2 = readl(php_ctlr->creg + INTR_LOC);
|
|
|
+ intr_loc2 = shpc_readl(ctrl, INTR_LOC);
|
|
|
dbg("%s: intr_loc2 = %x\n",__FUNCTION__, intr_loc2);
|
|
|
}
|
|
|
|
|
|
- if (intr_loc & 0x0001) {
|
|
|
+ if (intr_loc & CMD_INTR_PENDING) {
|
|
|
/*
|
|
|
* Command Complete Interrupt Pending
|
|
|
* RO only - clear by writing 1 to the Command Completion
|
|
|
* Detect bit in Controller SERR-INT register
|
|
|
*/
|
|
|
- temp_dword = readl(php_ctlr->creg + SERR_INTR_ENABLE);
|
|
|
- temp_dword &= 0xfffdffff;
|
|
|
- writel(temp_dword, php_ctlr->creg + SERR_INTR_ENABLE);
|
|
|
+ serr_int = shpc_readl(ctrl, SERR_INTR_ENABLE);
|
|
|
+ serr_int &= ~SERR_INTR_RSVDZ_MASK;
|
|
|
+ shpc_writel(ctrl, SERR_INTR_ENABLE, serr_int);
|
|
|
+
|
|
|
ctrl->cmd_busy = 0;
|
|
|
wake_up_interruptible(&ctrl->queue);
|
|
|
}
|
|
|
|
|
|
- if ((intr_loc = (intr_loc >> 1)) == 0)
|
|
|
+ if (!(intr_loc & ~CMD_INTR_PENDING))
|
|
|
goto out;
|
|
|
|
|
|
for (hp_slot = 0; hp_slot < ctrl->num_slots; hp_slot++) {
|
|
|
- /* To find out which slot has interrupt pending */
|
|
|
- if ((intr_loc >> hp_slot) & 0x01) {
|
|
|
- temp_dword = readl(php_ctlr->creg + SLOT1 + (4*hp_slot));
|
|
|
- dbg("%s: Slot %x with intr, slot register = %x\n",
|
|
|
- __FUNCTION__, hp_slot, temp_dword);
|
|
|
- temp_byte = (temp_dword >> 16) & 0xFF;
|
|
|
- if ((php_ctlr->switch_change_callback) && (temp_byte & 0x08))
|
|
|
- schedule_flag += php_ctlr->switch_change_callback(
|
|
|
- hp_slot, php_ctlr->callback_instance_id);
|
|
|
- if ((php_ctlr->attention_button_callback) && (temp_byte & 0x04))
|
|
|
- schedule_flag += php_ctlr->attention_button_callback(
|
|
|
- hp_slot, php_ctlr->callback_instance_id);
|
|
|
- if ((php_ctlr->presence_change_callback) && (temp_byte & 0x01))
|
|
|
- schedule_flag += php_ctlr->presence_change_callback(
|
|
|
- hp_slot , php_ctlr->callback_instance_id);
|
|
|
- if ((php_ctlr->power_fault_callback) && (temp_byte & 0x12))
|
|
|
- schedule_flag += php_ctlr->power_fault_callback(
|
|
|
- hp_slot, php_ctlr->callback_instance_id);
|
|
|
-
|
|
|
- /* Clear all slot events */
|
|
|
- temp_dword = 0xe01f3fff;
|
|
|
- writel(temp_dword, php_ctlr->creg + SLOT1 + (4*hp_slot));
|
|
|
-
|
|
|
- intr_loc2 = readl(php_ctlr->creg + INTR_LOC);
|
|
|
- dbg("%s: intr_loc2 = %x\n",__FUNCTION__, intr_loc2);
|
|
|
- }
|
|
|
+ /* To find out which slot has interrupt pending */
|
|
|
+ if (!(intr_loc & SLOT_INTR_PENDING(hp_slot)))
|
|
|
+ continue;
|
|
|
+
|
|
|
+ slot_reg = shpc_readl(ctrl, SLOT_REG(hp_slot));
|
|
|
+ dbg("%s: Slot %x with intr, slot register = %x\n",
|
|
|
+ __FUNCTION__, hp_slot, slot_reg);
|
|
|
+
|
|
|
+ if (slot_reg & MRL_CHANGE_DETECTED)
|
|
|
+ php_ctlr->switch_change_callback(
|
|
|
+ hp_slot, php_ctlr->callback_instance_id);
|
|
|
+
|
|
|
+ if (slot_reg & BUTTON_PRESS_DETECTED)
|
|
|
+ php_ctlr->attention_button_callback(
|
|
|
+ hp_slot, php_ctlr->callback_instance_id);
|
|
|
+
|
|
|
+ if (slot_reg & PRSNT_CHANGE_DETECTED)
|
|
|
+ php_ctlr->presence_change_callback(
|
|
|
+ hp_slot , php_ctlr->callback_instance_id);
|
|
|
+
|
|
|
+ if (slot_reg & (ISO_PFAULT_DETECTED | CON_PFAULT_DETECTED))
|
|
|
+ php_ctlr->power_fault_callback(
|
|
|
+ hp_slot, php_ctlr->callback_instance_id);
|
|
|
+
|
|
|
+ /* Clear all slot events */
|
|
|
+ slot_reg &= ~SLOT_REG_RSVDZ_MASK;
|
|
|
+ shpc_writel(ctrl, SLOT_REG(hp_slot), slot_reg);
|
|
|
}
|
|
|
out:
|
|
|
if (!shpchp_poll_mode) {
|
|
|
/* Unmask Global Interrupt Mask */
|
|
|
- temp_dword = readl(php_ctlr->creg + SERR_INTR_ENABLE);
|
|
|
- temp_dword &= 0xfffffffe;
|
|
|
- writel(temp_dword, php_ctlr->creg + SERR_INTR_ENABLE);
|
|
|
+ serr_int = shpc_readl(ctrl, SERR_INTR_ENABLE);
|
|
|
+ serr_int &= ~(GLOBAL_INTR_MASK | SERR_INTR_RSVDZ_MASK);
|
|
|
+ shpc_writel(ctrl, SERR_INTR_ENABLE, serr_int);
|
|
|
}
|
|
|
|
|
|
return IRQ_HANDLED;
|
|
@@ -1067,11 +958,11 @@ static irqreturn_t shpc_isr(int IRQ, void *dev_id, struct pt_regs *regs)
|
|
|
static int hpc_get_max_bus_speed (struct slot *slot, enum pci_bus_speed *value)
|
|
|
{
|
|
|
int retval = 0;
|
|
|
- struct php_ctlr_state_s *php_ctlr = slot->ctrl->hpc_ctlr_handle;
|
|
|
+ struct controller *ctrl = slot->ctrl;
|
|
|
enum pci_bus_speed bus_speed = PCI_SPEED_UNKNOWN;
|
|
|
- u8 pi = readb(php_ctlr->creg + PROG_INTERFACE);
|
|
|
- u32 slot_avail1 = readl(php_ctlr->creg + SLOT_AVAIL1);
|
|
|
- u32 slot_avail2 = readl(php_ctlr->creg + SLOT_AVAIL2);
|
|
|
+ u8 pi = shpc_readb(ctrl, PROG_INTERFACE);
|
|
|
+ u32 slot_avail1 = shpc_readl(ctrl, SLOT_AVAIL1);
|
|
|
+ u32 slot_avail2 = shpc_readl(ctrl, SLOT_AVAIL2);
|
|
|
|
|
|
DBG_ENTER_ROUTINE
|
|
|
|
|
@@ -1114,10 +1005,10 @@ static int hpc_get_max_bus_speed (struct slot *slot, enum pci_bus_speed *value)
|
|
|
static int hpc_get_cur_bus_speed (struct slot *slot, enum pci_bus_speed *value)
|
|
|
{
|
|
|
int retval = 0;
|
|
|
- struct php_ctlr_state_s *php_ctlr = slot->ctrl->hpc_ctlr_handle;
|
|
|
+ struct controller *ctrl = slot->ctrl;
|
|
|
enum pci_bus_speed bus_speed = PCI_SPEED_UNKNOWN;
|
|
|
- u16 sec_bus_reg = readw(php_ctlr->creg + SEC_BUS_CONFIG);
|
|
|
- u8 pi = readb(php_ctlr->creg + PROG_INTERFACE);
|
|
|
+ u16 sec_bus_reg = shpc_readw(ctrl, SEC_BUS_CONFIG);
|
|
|
+ u8 pi = shpc_readb(ctrl, PROG_INTERFACE);
|
|
|
u8 speed_mode = (pi == 2) ? (sec_bus_reg & 0xF) : (sec_bus_reg & 0x7);
|
|
|
|
|
|
DBG_ENTER_ROUTINE
|
|
@@ -1206,28 +1097,14 @@ static struct hpc_ops shpchp_hpc_ops = {
|
|
|
.release_ctlr = hpc_release_ctlr,
|
|
|
};
|
|
|
|
|
|
-inline static int shpc_indirect_creg_read(struct controller *ctrl, int index,
|
|
|
- u32 *value)
|
|
|
-{
|
|
|
- int rc;
|
|
|
- u32 cap_offset = ctrl->cap_offset;
|
|
|
- struct pci_dev *pdev = ctrl->pci_dev;
|
|
|
-
|
|
|
- rc = pci_write_config_byte(pdev, cap_offset + DWORD_SELECT, index);
|
|
|
- if (rc)
|
|
|
- return rc;
|
|
|
- return pci_read_config_dword(pdev, cap_offset + DWORD_DATA, value);
|
|
|
-}
|
|
|
-
|
|
|
int shpc_init(struct controller * ctrl, struct pci_dev * pdev)
|
|
|
{
|
|
|
struct php_ctlr_state_s *php_ctlr, *p;
|
|
|
void *instance_id = ctrl;
|
|
|
int rc, num_slots = 0;
|
|
|
u8 hp_slot;
|
|
|
- static int first = 1;
|
|
|
u32 shpc_base_offset;
|
|
|
- u32 tempdword, slot_reg;
|
|
|
+ u32 tempdword, slot_reg, slot_config;
|
|
|
u8 i;
|
|
|
|
|
|
DBG_ENTER_ROUTINE
|
|
@@ -1257,13 +1134,13 @@ int shpc_init(struct controller * ctrl, struct pci_dev * pdev)
|
|
|
}
|
|
|
dbg("%s: cap_offset = %x\n", __FUNCTION__, ctrl->cap_offset);
|
|
|
|
|
|
- rc = shpc_indirect_creg_read(ctrl, 0, &shpc_base_offset);
|
|
|
+ rc = shpc_indirect_read(ctrl, 0, &shpc_base_offset);
|
|
|
if (rc) {
|
|
|
err("%s: cannot read base_offset\n", __FUNCTION__);
|
|
|
goto abort_free_ctlr;
|
|
|
}
|
|
|
|
|
|
- rc = shpc_indirect_creg_read(ctrl, 3, &tempdword);
|
|
|
+ rc = shpc_indirect_read(ctrl, 3, &tempdword);
|
|
|
if (rc) {
|
|
|
err("%s: cannot read slot config\n", __FUNCTION__);
|
|
|
goto abort_free_ctlr;
|
|
@@ -1272,7 +1149,7 @@ int shpc_init(struct controller * ctrl, struct pci_dev * pdev)
|
|
|
dbg("%s: num_slots (indirect) %x\n", __FUNCTION__, num_slots);
|
|
|
|
|
|
for (i = 0; i < 9 + num_slots; i++) {
|
|
|
- rc = shpc_indirect_creg_read(ctrl, i, &tempdword);
|
|
|
+ rc = shpc_indirect_read(ctrl, i, &tempdword);
|
|
|
if (rc) {
|
|
|
err("%s: cannot read creg (index = %d)\n",
|
|
|
__FUNCTION__, i);
|
|
@@ -1287,11 +1164,6 @@ int shpc_init(struct controller * ctrl, struct pci_dev * pdev)
|
|
|
ctrl->mmio_size = 0x24 + 0x4 * num_slots;
|
|
|
}
|
|
|
|
|
|
- if (first) {
|
|
|
- spin_lock_init(&hpc_event_lock);
|
|
|
- first = 0;
|
|
|
- }
|
|
|
-
|
|
|
info("HPC vendor_id %x device_id %x ss_vid %x ss_did %x\n", pdev->vendor, pdev->device, pdev->subsystem_vendor,
|
|
|
pdev->subsystem_device);
|
|
|
|
|
@@ -1326,29 +1198,39 @@ int shpc_init(struct controller * ctrl, struct pci_dev * pdev)
|
|
|
php_ctlr->power_fault_callback = shpchp_handle_power_fault;
|
|
|
php_ctlr->callback_instance_id = instance_id;
|
|
|
|
|
|
+ ctrl->hpc_ctlr_handle = php_ctlr;
|
|
|
+ ctrl->hpc_ops = &shpchp_hpc_ops;
|
|
|
+
|
|
|
/* Return PCI Controller Info */
|
|
|
- php_ctlr->slot_device_offset = (readl(php_ctlr->creg + SLOT_CONFIG) & FIRST_DEV_NUM ) >> 8;
|
|
|
- php_ctlr->num_slots = readl(php_ctlr->creg + SLOT_CONFIG) & SLOT_NUM;
|
|
|
+ slot_config = shpc_readl(ctrl, SLOT_CONFIG);
|
|
|
+ php_ctlr->slot_device_offset = (slot_config & FIRST_DEV_NUM) >> 8;
|
|
|
+ php_ctlr->num_slots = slot_config & SLOT_NUM;
|
|
|
dbg("%s: slot_device_offset %x\n", __FUNCTION__, php_ctlr->slot_device_offset);
|
|
|
dbg("%s: num_slots %x\n", __FUNCTION__, php_ctlr->num_slots);
|
|
|
|
|
|
/* Mask Global Interrupt Mask & Command Complete Interrupt Mask */
|
|
|
- tempdword = readl(php_ctlr->creg + SERR_INTR_ENABLE);
|
|
|
+ tempdword = shpc_readl(ctrl, SERR_INTR_ENABLE);
|
|
|
dbg("%s: SERR_INTR_ENABLE = %x\n", __FUNCTION__, tempdword);
|
|
|
- tempdword = 0x0003000f;
|
|
|
- writel(tempdword, php_ctlr->creg + SERR_INTR_ENABLE);
|
|
|
- tempdword = readl(php_ctlr->creg + SERR_INTR_ENABLE);
|
|
|
+ tempdword |= (GLOBAL_INTR_MASK | GLOBAL_SERR_MASK |
|
|
|
+ COMMAND_INTR_MASK | ARBITER_SERR_MASK);
|
|
|
+ tempdword &= ~SERR_INTR_RSVDZ_MASK;
|
|
|
+ shpc_writel(ctrl, SERR_INTR_ENABLE, tempdword);
|
|
|
+ tempdword = shpc_readl(ctrl, SERR_INTR_ENABLE);
|
|
|
dbg("%s: SERR_INTR_ENABLE = %x\n", __FUNCTION__, tempdword);
|
|
|
|
|
|
/* Mask the MRL sensor SERR Mask of individual slot in
|
|
|
* Slot SERR-INT Mask & clear all the existing event if any
|
|
|
*/
|
|
|
for (hp_slot = 0; hp_slot < php_ctlr->num_slots; hp_slot++) {
|
|
|
- slot_reg = readl(php_ctlr->creg + SLOT1 + 4*hp_slot );
|
|
|
+ slot_reg = shpc_readl(ctrl, SLOT_REG(hp_slot));
|
|
|
dbg("%s: Default Logical Slot Register %d value %x\n", __FUNCTION__,
|
|
|
hp_slot, slot_reg);
|
|
|
- tempdword = 0xffff3fff;
|
|
|
- writel(tempdword, php_ctlr->creg + SLOT1 + (4*hp_slot));
|
|
|
+ slot_reg |= (PRSNT_CHANGE_INTR_MASK | ISO_PFAULT_INTR_MASK |
|
|
|
+ BUTTON_PRESS_INTR_MASK | MRL_CHANGE_INTR_MASK |
|
|
|
+ CON_PFAULT_INTR_MASK | MRL_CHANGE_SERR_MASK |
|
|
|
+ CON_PFAULT_SERR_MASK);
|
|
|
+ slot_reg &= ~SLOT_REG_RSVDZ_MASK;
|
|
|
+ shpc_writel(ctrl, SLOT_REG(hp_slot), slot_reg);
|
|
|
}
|
|
|
|
|
|
if (shpchp_poll_mode) {/* Install interrupt polling code */
|
|
@@ -1392,24 +1274,37 @@ int shpc_init(struct controller * ctrl, struct pci_dev * pdev)
|
|
|
}
|
|
|
spin_unlock(&list_lock);
|
|
|
|
|
|
-
|
|
|
ctlr_seq_num++;
|
|
|
- ctrl->hpc_ctlr_handle = php_ctlr;
|
|
|
- ctrl->hpc_ops = &shpchp_hpc_ops;
|
|
|
|
|
|
+ /*
|
|
|
+ * If this is the first controller to be initialized,
|
|
|
+ * initialize the shpchpd work queue
|
|
|
+ */
|
|
|
+ if (atomic_add_return(1, &shpchp_num_controllers) == 1) {
|
|
|
+ shpchp_wq = create_singlethread_workqueue("shpchpd");
|
|
|
+ if (!shpchp_wq)
|
|
|
+ return -ENOMEM;
|
|
|
+ }
|
|
|
+
|
|
|
+ /*
|
|
|
+ * Unmask all event interrupts of all slots
|
|
|
+ */
|
|
|
for (hp_slot = 0; hp_slot < php_ctlr->num_slots; hp_slot++) {
|
|
|
- slot_reg = readl(php_ctlr->creg + SLOT1 + 4*hp_slot );
|
|
|
+ slot_reg = shpc_readl(ctrl, SLOT_REG(hp_slot));
|
|
|
dbg("%s: Default Logical Slot Register %d value %x\n", __FUNCTION__,
|
|
|
hp_slot, slot_reg);
|
|
|
- tempdword = 0xe01f3fff;
|
|
|
- writel(tempdword, php_ctlr->creg + SLOT1 + (4*hp_slot));
|
|
|
+ slot_reg &= ~(PRSNT_CHANGE_INTR_MASK | ISO_PFAULT_INTR_MASK |
|
|
|
+ BUTTON_PRESS_INTR_MASK | MRL_CHANGE_INTR_MASK |
|
|
|
+ CON_PFAULT_INTR_MASK | SLOT_REG_RSVDZ_MASK);
|
|
|
+ shpc_writel(ctrl, SLOT_REG(hp_slot), slot_reg);
|
|
|
}
|
|
|
if (!shpchp_poll_mode) {
|
|
|
/* Unmask all general input interrupts and SERR */
|
|
|
- tempdword = readl(php_ctlr->creg + SERR_INTR_ENABLE);
|
|
|
- tempdword = 0x0000000a;
|
|
|
- writel(tempdword, php_ctlr->creg + SERR_INTR_ENABLE);
|
|
|
- tempdword = readl(php_ctlr->creg + SERR_INTR_ENABLE);
|
|
|
+ tempdword = shpc_readl(ctrl, SERR_INTR_ENABLE);
|
|
|
+ tempdword &= ~(GLOBAL_INTR_MASK | COMMAND_INTR_MASK |
|
|
|
+ SERR_INTR_RSVDZ_MASK);
|
|
|
+ shpc_writel(ctrl, SERR_INTR_ENABLE, tempdword);
|
|
|
+ tempdword = shpc_readl(ctrl, SERR_INTR_ENABLE);
|
|
|
dbg("%s: SERR_INTR_ENABLE = %x\n", __FUNCTION__, tempdword);
|
|
|
}
|
|
|
|