Merge tag 'imx-dt-3.9' of git://git.linaro.org/people/shawnguo/linux-2.6 into late/dt

From Shawn Guo:
imx device tree changes for 3.9

 - Some tweaking and updates on device tree sources
 - Enable imx6q-cpufreq support for device tree boot
 - IMX/MXC onewire driver device tree conversion.  Onewire maintainer
   Evgeniy Polyakov gives his ACK to bless it go via arm-soc tree.

* tag 'imx-dt-3.9' of git://git.linaro.org/people/shawnguo/linux-2.6: (22 commits)
  ARM: dts: add dtsi for imx6q and imx6dl
  ARM: dts: rename imx6q.dtsi to imx6qdl.dtsi
  ARM: dts: i.MX6: Add regulator delay support
  ARM: dts: Add device tree entry for onewire master on i.MX53
  ARM: i.MX53: Add clocks for i.mx53 onewire master.
  W1: Add device tree support to MXC onewire master.
  ARM: imx: enable imx6q-cpufreq support
  ARM: dts: Add apf51 basic support
  ARM i.MX6: change mxs usbphy clock usage
  ARM: dts: imx6q: Remove silicon version from SDMA firmware
  ARM i.MX53: dts: add oftree for MBa53 baseboard
  ARM i.MX53: add dts for the TQ tqma53 module
  ARM: dts: imx53: pinctrl update
  ARM i.MX51 babbage: Add keypad support
  ARM: dts: imx: Add imx51 KPP entry
  ARM: dts: imx25-karo-tx25: Put status entry in the end
  ARM: mx25pdk: Add device tree support
  ARM: dts: imx: use nodes label in board dts
  ARM: dts: add missing imx dtb targets
  ARM: boot: dts: Add an entry for imx27-pdk.dtb
  ...

Documentation/devicetree/bindings/arm/armadeus.txt

@@ -0,0 +1,6 @@
+Armadeus i.MX Platforms Device Tree Bindings
+-----------------------------------------------
+
+APF51: i.MX51 based module.
+Required root node properties:
+    - compatible = "armadeus,imx51-apf51", "fsl,imx51";

Documentation/devicetree/bindings/arm/fsl.txt

@@ -5,6 +5,14 @@ i.MX23 Evaluation Kit
 Required root node properties:
     - compatible = "fsl,imx23-evk", "fsl,imx23";
 
+i.MX25 Product Development Kit
+Required root node properties:
+    - compatible = "fsl,imx25-pdk", "fsl,imx25";
+
+i.MX27 Product Development Kit
+Required root node properties:
+    - compatible = "fsl,imx27-pdk", "fsl,imx27";
+
 i.MX28 Evaluation Kit
 Required root node properties:
     - compatible = "fsl,imx28-evk", "fsl,imx28";

Documentation/devicetree/bindings/clock/imx5-clock.txt

@@ -171,6 +171,7 @@ clocks and IDs.
 	can_sel			156
 	can1_serial_gate	157
 	can1_ipg_gate		158
+	owire_gate		159
 
 Examples (for mx53):
 

Documentation/devicetree/bindings/clock/imx6q-clock.txt

@@ -203,6 +203,8 @@ clocks and IDs.
 	pcie_ref		188
 	pcie_ref_125m		189
 	enet_ref		190
+	usbphy1_gate		191
+	usbphy2_gate		192
 
 Examples:
 

Documentation/devicetree/bindings/w1/fsl-imx-owire.txt

@@ -0,0 +1,19 @@
+* Freescale i.MX One wire bus master controller
+
+Required properties:
+- compatible : should be "fsl,imx21-owire"
+- reg : Address and length of the register set for the device
+
+Optional properties:
+- clocks : phandle of clock that supplies the module (required if platform
+		clock bindings use device tree)
+
+Example:
+
+- From imx53.dtsi:
+owire: owire@63fa4000 {
+	compatible = "fsl,imx53-owire", "fsl,imx21-owire";
+	reg = <0x63fa4000 0x4000>;
+	clocks = <&clks 159>;
+	status = "disabled";
+};

arch/arm/boot/dts/Makefile

@@ -79,9 +79,17 @@ dtb-$(CONFIG_ARCH_MVEBU) += armada-370-db.dtb \
 	armada-370-mirabox.dtb \
 	armada-xp-db.dtb \
 	armada-xp-openblocks-ax3-4.dtb
-dtb-$(CONFIG_ARCH_MXC) += imx51-babbage.dtb \
+dtb-$(CONFIG_ARCH_MXC) += \
+	imx25-karo-tx25.dtb \
+	imx25-pdk.dtb \
+	imx27-apf27.dtb \
+	imx27-pdk.dtb \
+	imx31-bug.dtb \
+	imx51-apf51.dtb \
+	imx51-babbage.dtb \
 	imx53-ard.dtb \
 	imx53-evk.dtb \
+	imx53-mba53.dtb \
 	imx53-qsb.dtb \
 	imx53-smd.dtb \
 	imx6q-arm2.dtb \

arch/arm/boot/dts/imx25-karo-tx25.dts

@@ -19,26 +19,18 @@
 	memory {
 		reg = <0x80000000 0x02000000 0x90000000 0x02000000>;
 	};
+};
 
-	soc {
-		aips@43f00000 {
-			uart1: serial@43f90000 {
-				status = "okay";
-			};
-		};
+&uart1 {
+	status = "okay";
+};
 
-		spba@50000000 {
-			fec: ethernet@50038000 {
-				status = "okay";
-				phy-mode = "rmii";
-			};
-		};
+&fec {
+	phy-mode = "rmii";
+	status = "okay";
+};
 
-		emi@80000000 {
-			nand@bb000000 {
-				nand-on-flash-bbt;
-				status = "okay";
-			};
-		};
-	};
+&nfc {
+	nand-on-flash-bbt;
+	status = "okay";
 };

arch/arm/boot/dts/imx25-pdk.dts

@@ -0,0 +1,36 @@
+/*
+ * Copyright 2013 Freescale Semiconductor, Inc.
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+/dts-v1/;
+/include/ "imx25.dtsi"
+
+/ {
+	model = "Freescale i.MX25 Product Development Kit";
+	compatible = "fsl,imx25-pdk", "fsl,imx25";
+
+	memory {
+		reg = <0x80000000 0x4000000>;
+	};
+};
+
+&uart1 {
+	status = "okay";
+};
+
+&fec {
+	phy-mode = "rmii";
+	status = "okay";
+};
+
+&nfc {
+	nand-on-flash-bbt;
+	status = "okay";
+};

arch/arm/boot/dts/imx25.dtsi

@@ -499,7 +499,7 @@
 			reg = <0x80000000 0x3b002000>;
 			ranges;
 
-			nand@bb000000 {
+			nfc: nand@bb000000 {
 				#address-cells = <1>;
 				#size-cells = <1>;
 

arch/arm/boot/dts/imx27-apf27.dts

@@ -32,58 +32,54 @@
 			clock-frequency = <0>;
 		};
 	};
+};
 
-	soc {
-		aipi@10000000 {
-			serial@1000a000 {
-				status = "okay";
-			};
+&uart1 {
+	status = "okay";
+};
 
-			ethernet@1002b000 {
-				status = "okay";
-			};
-		};
+&fec {
+	status = "okay";
+};
 
-		nand@d8000000 {
-			status = "okay";
-			nand-bus-width = <16>;
-			nand-ecc-mode = "hw";
-			nand-on-flash-bbt;
+&nfc {
+	status = "okay";
+	nand-bus-width = <16>;
+	nand-ecc-mode = "hw";
+	nand-on-flash-bbt;
 
-			partition@0 {
-				label = "u-boot";
-				reg = <0x0 0x100000>;
-			};
+	partition@0 {
+		label = "u-boot";
+		reg = <0x0 0x100000>;
+	};
 
-			partition@100000 {
-				label = "env";
-				reg = <0x100000 0x80000>;
-			};
+	partition@100000 {
+		label = "env";
+		reg = <0x100000 0x80000>;
+	};
 
-			partition@180000 {
-				label = "env2";
-				reg = <0x180000 0x80000>;
-			};
+	partition@180000 {
+		label = "env2";
+		reg = <0x180000 0x80000>;
+	};
 
-			partition@200000 {
-				label = "firmware";
-				reg = <0x200000 0x80000>;
-			};
+	partition@200000 {
+		label = "firmware";
+		reg = <0x200000 0x80000>;
+	};
 
-			partition@280000 {
-				label = "dtb";
-				reg = <0x280000 0x80000>;
-			};
+	partition@280000 {
+		label = "dtb";
+		reg = <0x280000 0x80000>;
+	};
 
-			partition@300000 {
-				label = "kernel";
-				reg = <0x300000 0x500000>;
-			};
+	partition@300000 {
+		label = "kernel";
+		reg = <0x300000 0x500000>;
+	};
 
-			partition@800000 {
-				label = "rootfs";
-				reg = <0x800000 0xf800000>;
-			};
-		};
+	partition@800000 {
+		label = "rootfs";
+		reg = <0x800000 0xf800000>;
 	};
 };

arch/arm/boot/dts/imx27-3ds.dts → arch/arm/boot/dts/imx27-pdk.dts

@@ -13,25 +13,19 @@
 /include/ "imx27.dtsi"
 
 / {
-	model = "mx27_3ds";
-	compatible = "freescale,imx27-3ds", "fsl,imx27";
+	model = "Freescale i.MX27 Product Development Kit";
+	compatible = "fsl,imx27-pdk", "fsl,imx27";
 
 	memory {
 		reg = <0x0 0x0>;
 	};
+};
 
-	soc {
-		aipi@10000000 { /* aipi1 */
-			uart1: serial@1000a000 {
-				fsl,uart-has-rtscts;
-				status = "okay";
-			};
-		};
+&uart1 {
+	fsl,uart-has-rtscts;
+	status = "okay";
+};
 
-		aipi@10020000 { /* aipi2 */
-			ethernet@1002b000 {
-				status = "okay";
-			};
-		};
-	};
+&fec {
+	status = "okay";
 };

arch/arm/boot/dts/imx31-bug.dts

@@ -19,13 +19,9 @@
 	memory {
 		reg = <0x80000000 0x8000000>; /* 128M */
 	};
+};
 
-	soc {
-		aips@43f00000 { /* AIPS1 */
-			uart5: serial@43fb4000 {
-				fsl,uart-has-rtscts;
-				status = "okay";
-			};
-		};
-	};
+&uart5 {
+	fsl,uart-has-rtscts;
+	status = "okay";
 };

arch/arm/boot/dts/imx51-apf51.dts

@@ -0,0 +1,52 @@
+/*
+ * Copyright 2012 Armadeus Systems - <support@armadeus.com>
+ * Copyright 2012 Laurent Cans <laurent.cans@gmail.com>
+ *
+ * Based on mx51-babbage.dts
+ * Copyright 2011 Freescale Semiconductor, Inc.
+ * Copyright 2011 Linaro Ltd.
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+/dts-v1/;
+/include/ "imx51.dtsi"
+
+/ {
+	model = "Armadeus Systems APF51 module";
+	compatible = "armadeus,imx51-apf51", "fsl,imx51";
+
+	memory {
+		reg = <0x90000000 0x20000000>;
+	};
+
+	clocks {
+		ckih1 {
+			clock-frequency = <0>;
+		};
+
+		osc {
+			clock-frequency = <33554432>;
+		};
+	};
+};
+
+&fec {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_fec_2>;
+	phy-mode = "mii";
+	phy-reset-gpios = <&gpio3 0 0>;
+	phy-reset-duration = <1>;
+	status = "okay";
+};
+
+&uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart3_2>;
+	status = "okay";
+};

arch/arm/boot/dts/imx51-babbage.dts

@@ -21,239 +21,20 @@
 		reg = <0x90000000 0x20000000>;
 	};
 
-	soc {
-		display@di0 {
-			compatible = "fsl,imx-parallel-display";
-			crtcs = <&ipu 0>;
-			interface-pix-fmt = "rgb24";
-			pinctrl-names = "default";
-			pinctrl-0 = <&pinctrl_ipu_disp1_1>;
-		};
-
-		display@di1 {
-			compatible = "fsl,imx-parallel-display";
-			crtcs = <&ipu 1>;
-			interface-pix-fmt = "rgb565";
-			pinctrl-names = "default";
-			pinctrl-0 = <&pinctrl_ipu_disp2_1>;
-		};
-
-		aips@70000000 { /* aips-1 */
-			spba@70000000 {
-				esdhc@70004000 { /* ESDHC1 */
-					pinctrl-names = "default";
-					pinctrl-0 = <&pinctrl_esdhc1_1>;
-					fsl,cd-controller;
-					fsl,wp-controller;
-					status = "okay";
-				};
-
-				esdhc@70008000 { /* ESDHC2 */
-					pinctrl-names = "default";
-					pinctrl-0 = <&pinctrl_esdhc2_1>;
-					cd-gpios = <&gpio1 6 0>;
-					wp-gpios = <&gpio1 5 0>;
-					status = "okay";
-				};
-
-				uart3: serial@7000c000 {
-					pinctrl-names = "default";
-					pinctrl-0 = <&pinctrl_uart3_1>;
-					fsl,uart-has-rtscts;
-					status = "okay";
-				};
-
-				ecspi@70010000 { /* ECSPI1 */
-					pinctrl-names = "default";
-					pinctrl-0 = <&pinctrl_ecspi1_1>;
-					fsl,spi-num-chipselects = <2>;
-					cs-gpios = <&gpio4 24 0>, <&gpio4 25 0>;
-					status = "okay";
-
-					pmic: mc13892@0 {
-						#address-cells = <1>;
-						#size-cells = <0>;
-						compatible = "fsl,mc13892";
-						spi-max-frequency = <6000000>;
-						reg = <0>;
-						interrupt-parent = <&gpio1>;
-						interrupts = <8 0x4>;
-
-						regulators {
-							sw1_reg: sw1 {
-								regulator-min-microvolt = <600000>;
-								regulator-max-microvolt = <1375000>;
-								regulator-boot-on;
-								regulator-always-on;
-							};
-
-							sw2_reg: sw2 {
-								regulator-min-microvolt = <900000>;
-								regulator-max-microvolt = <1850000>;
-								regulator-boot-on;
-								regulator-always-on;
-							};
-
-							sw3_reg: sw3 {
-								regulator-min-microvolt = <1100000>;
-								regulator-max-microvolt = <1850000>;
-								regulator-boot-on;
-								regulator-always-on;
-							};
-
-							sw4_reg: sw4 {
-								regulator-min-microvolt = <1100000>;
-								regulator-max-microvolt = <1850000>;
-								regulator-boot-on;
-								regulator-always-on;
-							};
-
-							vpll_reg: vpll {
-								regulator-min-microvolt = <1050000>;
-								regulator-max-microvolt = <1800000>;
-								regulator-boot-on;
-								regulator-always-on;
-							};
-
-							vdig_reg: vdig {
-								regulator-min-microvolt = <1650000>;
-								regulator-max-microvolt = <1650000>;
-								regulator-boot-on;
-							};
-
-							vsd_reg: vsd {
-								regulator-min-microvolt = <1800000>;
-								regulator-max-microvolt = <3150000>;
-							};
-
-							vusb2_reg: vusb2 {
-								regulator-min-microvolt = <2400000>;
-								regulator-max-microvolt = <2775000>;
-								regulator-boot-on;
-								regulator-always-on;
-							};
-
-							vvideo_reg: vvideo {
-								regulator-min-microvolt = <2775000>;
-								regulator-max-microvolt = <2775000>;
-							};
-
-							vaudio_reg: vaudio {
-								regulator-min-microvolt = <2300000>;
-								regulator-max-microvolt = <3000000>;
-							};
-
-							vcam_reg: vcam {
-								regulator-min-microvolt = <2500000>;
-								regulator-max-microvolt = <3000000>;
-							};
-
-							vgen1_reg: vgen1 {
-								regulator-min-microvolt = <1200000>;
-								regulator-max-microvolt = <1200000>;
-							};
-
-							vgen2_reg: vgen2 {
-								regulator-min-microvolt = <1200000>;
-								regulator-max-microvolt = <3150000>;
-								regulator-always-on;
-							};
-
-							vgen3_reg: vgen3 {
-								regulator-min-microvolt = <1800000>;
-								regulator-max-microvolt = <2900000>;
-								regulator-always-on;
-							};
-						};
-					};
-
-					flash: at45db321d@1 {
-						#address-cells = <1>;
-						#size-cells = <1>;
-						compatible = "atmel,at45db321d", "atmel,at45", "atmel,dataflash";
-						spi-max-frequency = <25000000>;
-						reg = <1>;
-
-						partition@0 {
-							label = "U-Boot";
-							reg = <0x0 0x40000>;
-							read-only;
-						};
-
-						partition@40000 {
-							label = "Kernel";
-							reg = <0x40000 0x3c0000>;
-						};
-					};
-				};
-
-				ssi2: ssi@70014000 {
-					fsl,mode = "i2s-slave";
-					status = "okay";
-				};
-			};
-
-			iomuxc@73fa8000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&pinctrl_hog>;
-
-				hog {
-					pinctrl_hog: hoggrp {
-						fsl,pins = <
-							694  0x20d5	/* MX51_PAD_GPIO1_0__SD1_CD */
-							697  0x20d5	/* MX51_PAD_GPIO1_1__SD1_WP */
-							737  0x100	/* MX51_PAD_GPIO1_5__GPIO1_5 */
-							740  0x100	/* MX51_PAD_GPIO1_6__GPIO1_6 */
-							121  0x5	/* MX51_PAD_EIM_A27__GPIO2_21 */
-							402  0x85	/* MX51_PAD_CSPI1_SS0__GPIO4_24 */
-							405  0x85	/* MX51_PAD_CSPI1_SS1__GPIO4_25 */
-						>;
-					};
-				};
-			};
-
-			uart1: serial@73fbc000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&pinctrl_uart1_1>;
-				fsl,uart-has-rtscts;
-				status = "okay";
-			};
-
-			uart2: serial@73fc0000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&pinctrl_uart2_1>;
-				status = "okay";
-			};
-		};
-
-		aips@80000000 {	/* aips-2 */
-			i2c@83fc4000 { /* I2C2 */
-				pinctrl-names = "default";
-				pinctrl-0 = <&pinctrl_i2c2_1>;
-				status = "okay";
-
-				sgtl5000: codec@0a {
-					compatible = "fsl,sgtl5000";
-					reg = <0x0a>;
-					clock-frequency = <26000000>;
-					VDDA-supply = <&vdig_reg>;
-					VDDIO-supply = <&vvideo_reg>;
-				};
-			};
-
-			audmux@83fd0000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&pinctrl_audmux_1>;
-				status = "okay";
-			};
+	display@di0 {
+		compatible = "fsl,imx-parallel-display";
+		crtcs = <&ipu 0>;
+		interface-pix-fmt = "rgb24";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_ipu_disp1_1>;
+	};
 
-			ethernet@83fec000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&pinctrl_fec_1>;
-				phy-mode = "mii";
-				status = "okay";
-			};
-		};
+	display@di1 {
+		compatible = "fsl,imx-parallel-display";
+		crtcs = <&ipu 1>;
+		interface-pix-fmt = "rgb565";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_ipu_disp2_1>;
 	};
 
 	gpio-keys {
@@ -281,3 +62,236 @@
 		mux-ext-port = <3>;
 	};
 };
+
+&esdhc1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_esdhc1_1>;
+	fsl,cd-controller;
+	fsl,wp-controller;
+	status = "okay";
+};
+
+&esdhc2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_esdhc2_1>;
+	cd-gpios = <&gpio1 6 0>;
+	wp-gpios = <&gpio1 5 0>;
+	status = "okay";
+};
+
+&uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart3_1>;
+	fsl,uart-has-rtscts;
+	status = "okay";
+};
+
+&ecspi1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi1_1>;
+	fsl,spi-num-chipselects = <2>;
+	cs-gpios = <&gpio4 24 0>, <&gpio4 25 0>;
+	status = "okay";
+
+	pmic: mc13892@0 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "fsl,mc13892";
+		spi-max-frequency = <6000000>;
+		reg = <0>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <8 0x4>;
+
+		regulators {
+			sw1_reg: sw1 {
+				regulator-min-microvolt = <600000>;
+				regulator-max-microvolt = <1375000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			sw2_reg: sw2 {
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt = <1850000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			sw3_reg: sw3 {
+				regulator-min-microvolt = <1100000>;
+				regulator-max-microvolt = <1850000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			sw4_reg: sw4 {
+				regulator-min-microvolt = <1100000>;
+				regulator-max-microvolt = <1850000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			vpll_reg: vpll {
+				regulator-min-microvolt = <1050000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			vdig_reg: vdig {
+				regulator-min-microvolt = <1650000>;
+				regulator-max-microvolt = <1650000>;
+				regulator-boot-on;
+			};
+
+			vsd_reg: vsd {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3150000>;
+			};
+
+			vusb2_reg: vusb2 {
+				regulator-min-microvolt = <2400000>;
+				regulator-max-microvolt = <2775000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			vvideo_reg: vvideo {
+				regulator-min-microvolt = <2775000>;
+				regulator-max-microvolt = <2775000>;
+			};
+
+			vaudio_reg: vaudio {
+				regulator-min-microvolt = <2300000>;
+				regulator-max-microvolt = <3000000>;
+			};
+
+			vcam_reg: vcam {
+				regulator-min-microvolt = <2500000>;
+				regulator-max-microvolt = <3000000>;
+			};
+
+			vgen1_reg: vgen1 {
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <1200000>;
+			};
+
+			vgen2_reg: vgen2 {
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <3150000>;
+				regulator-always-on;
+			};
+
+			vgen3_reg: vgen3 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <2900000>;
+				regulator-always-on;
+			};
+		};
+	};
+
+	flash: at45db321d@1 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "atmel,at45db321d", "atmel,at45", "atmel,dataflash";
+		spi-max-frequency = <25000000>;
+		reg = <1>;
+
+		partition@0 {
+			label = "U-Boot";
+			reg = <0x0 0x40000>;
+			read-only;
+		};
+
+		partition@40000 {
+			label = "Kernel";
+			reg = <0x40000 0x3c0000>;
+		};
+	};
+};
+
+&ssi2 {
+	fsl,mode = "i2s-slave";
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_hog>;
+
+	hog {
+		pinctrl_hog: hoggrp {
+			fsl,pins = <
+				694  0x20d5	/* MX51_PAD_GPIO1_0__SD1_CD */
+				697  0x20d5	/* MX51_PAD_GPIO1_1__SD1_WP */
+				737  0x100	/* MX51_PAD_GPIO1_5__GPIO1_5 */
+				740  0x100	/* MX51_PAD_GPIO1_6__GPIO1_6 */
+				121  0x5	/* MX51_PAD_EIM_A27__GPIO2_21 */
+				402  0x85	/* MX51_PAD_CSPI1_SS0__GPIO4_24 */
+				405  0x85	/* MX51_PAD_CSPI1_SS1__GPIO4_25 */
+			>;
+		};
+	};
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1_1>;
+	fsl,uart-has-rtscts;
+	status = "okay";
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2_1>;
+	status = "okay";
+};
+
+&i2c2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c2_1>;
+	status = "okay";
+
+	sgtl5000: codec@0a {
+		compatible = "fsl,sgtl5000";
+		reg = <0x0a>;
+		clock-frequency = <26000000>;
+		VDDA-supply = <&vdig_reg>;
+		VDDIO-supply = <&vvideo_reg>;
+	};
+};
+
+&audmux {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_audmux_1>;
+	status = "okay";
+};
+
+&fec {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_fec_1>;
+	phy-mode = "mii";
+	status = "okay";
+};
+
+&kpp {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_kpp_1>;
+	linux,keymap = <0x00000067	/* KEY_UP */
+			0x0001006c	/* KEY_DOWN */
+			0x00020072	/* KEY_VOLUMEDOWN */
+			0x00030066	/* KEY_HOME */
+			0x0100006a	/* KEY_RIGHT */
+			0x01010069	/* KEY_LEFT */
+			0x0102001c	/* KEY_ENTER */
+			0x01030073	/* KEY_VOLUMEUP */
+			0x02000040	/* KEY_F6 */
+			0x02010042	/* KEY_F8 */
+			0x02020043	/* KEY_F9 */
+			0x02030044	/* KEY_F10 */
+			0x0300003b	/* KEY_F1 */
+			0x0301003c	/* KEY_F2 */
+			0x0302003d	/* KEY_F3 */
+			0x03030074>;	/* KEY_POWER */
+	status = "okay";
+};

arch/arm/boot/dts/imx51.dtsi

@@ -221,6 +221,14 @@
 				#interrupt-cells = <2>;
 			};
 
+			kpp: kpp@73f94000 {
+				compatible = "fsl,imx51-kpp", "fsl,imx21-kpp";
+				reg = <0x73f94000 0x4000>;
+				interrupts = <60>;
+				clocks = <&clks 0>;
+				status = "disabled";
+			};
+
 			wdog1: wdog@73f98000 {
 				compatible = "fsl,imx51-wdt", "fsl,imx21-wdt";
 				reg = <0x73f98000 0x4000>;
@@ -273,6 +281,29 @@
 							260 0x80000000	/* MX51_PAD_NANDF_RDY_INT__FEC_TX_CLK */
 						>;
 					};
+
+					pinctrl_fec_2: fecgrp-2 {
+						fsl,pins = <
+							589 0x80000000 /* MX51_PAD_DI_GP3__FEC_TX_ER */
+							592 0x80000000 /* MX51_PAD_DI2_PIN4__FEC_CRS */
+							594 0x80000000 /* MX51_PAD_DI2_PIN2__FEC_MDC */
+							596 0x80000000 /* MX51_PAD_DI2_PIN3__FEC_MDIO */
+							598 0x80000000 /* MX51_PAD_DI2_DISP_CLK__FEC_RDATA1 */
+							602 0x80000000 /* MX51_PAD_DI_GP4__FEC_RDATA2 */
+							604 0x80000000 /* MX51_PAD_DISP2_DAT0__FEC_RDATA3 */
+							609 0x80000000 /* MX51_PAD_DISP2_DAT1__FEC_RX_ER */
+							618 0x80000000 /* MX51_PAD_DISP2_DAT6__FEC_TDATA1 */
+							623 0x80000000 /* MX51_PAD_DISP2_DAT7__FEC_TDATA2 */
+							628 0x80000000 /* MX51_PAD_DISP2_DAT8__FEC_TDATA3 */
+							634 0x80000000 /* MX51_PAD_DISP2_DAT9__FEC_TX_EN */
+							639 0x80000000 /* MX51_PAD_DISP2_DAT10__FEC_COL */
+							644 0x80000000 /* MX51_PAD_DISP2_DAT11__FEC_RX_CLK */
+							649 0x80000000 /* MX51_PAD_DISP2_DAT12__FEC_RX_DV */
+							653 0x80000000 /* MX51_PAD_DISP2_DAT13__FEC_TX_CLK */
+							657 0x80000000 /* MX51_PAD_DISP2_DAT14__FEC_RDATA0 */
+							662 0x80000000 /* MX51_PAD_DISP2_DAT15__FEC_TDATA0 */
+						>;
+					};
 				};
 
 				ecspi1 {
@@ -409,6 +440,28 @@
 							49 0x1c5	/* MX51_PAD_EIM_D24__UART3_CTS */
 						>;
 					};
+
+					pinctrl_uart3_2: uart3grp-2 {
+						fsl,pins = <
+							434 0x1c5	/* MX51_PAD_UART3_RXD__UART3_RXD */
+							430 0x1c5	/* MX51_PAD_UART3_TXD__UART3_TXD */
+						>;
+					};
+				};
+
+				kpp {
+					pinctrl_kpp_1: kppgrp-1 {
+						fsl,pins = <
+							438 0xe0	/* MX51_PAD_KEY_ROW0__KEY_ROW0 */
+							439 0xe0	/* MX51_PAD_KEY_ROW1__KEY_ROW1 */
+							440 0xe0	/* MX51_PAD_KEY_ROW2__KEY_ROW2 */
+							441 0xe0	/* MX51_PAD_KEY_ROW3__KEY_ROW3 */
+							442 0xe8	/* MX51_PAD_KEY_COL0__KEY_COL0 */
+							444 0xe8	/* MX51_PAD_KEY_COL1__KEY_COL1 */
+							446 0xe8	/* MX51_PAD_KEY_COL2__KEY_COL2 */
+							448 0xe8	/* MX51_PAD_KEY_COL3__KEY_COL3 */
+						>;
+					};
 				};
 			};
 

arch/arm/boot/dts/imx53-ard.dts

@@ -21,72 +21,6 @@
 		reg = <0x70000000 0x40000000>;
 	};
 
-	soc {
-		aips@50000000 { /* AIPS1 */
-			spba@50000000 {
-				esdhc@50004000 { /* ESDHC1 */
-					pinctrl-names = "default";
-					pinctrl-0 = <&pinctrl_esdhc1_2>;
-					cd-gpios = <&gpio1 1 0>;
-					wp-gpios = <&gpio1 9 0>;
-					status = "okay";
-				};
-			};
-
-			iomuxc@53fa8000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&pinctrl_hog>;
-
-				hog {
-					pinctrl_hog: hoggrp {
-						fsl,pins = <
-							1077 0x80000000	/* MX53_PAD_GPIO_1__GPIO1_1 */
-							1085 0x80000000	/* MX53_PAD_GPIO_9__GPIO1_9 */
-							486  0x80000000	/* MX53_PAD_EIM_EB3__GPIO2_31 */
-							739  0x80000000	/* MX53_PAD_GPIO_10__GPIO4_0 */
-							218  0x80000000	/* MX53_PAD_DISP0_DAT16__GPIO5_10 */
-							226  0x80000000	/* MX53_PAD_DISP0_DAT17__GPIO5_11 */
-							233  0x80000000	/* MX53_PAD_DISP0_DAT18__GPIO5_12 */
-							241  0x80000000	/* MX53_PAD_DISP0_DAT19__GPIO5_13 */
-							429  0x80000000	/* MX53_PAD_EIM_D16__EMI_WEIM_D_16 */
-							435  0x80000000	/* MX53_PAD_EIM_D17__EMI_WEIM_D_17 */
-							441  0x80000000	/* MX53_PAD_EIM_D18__EMI_WEIM_D_18 */
-							448  0x80000000	/* MX53_PAD_EIM_D19__EMI_WEIM_D_19 */
-							456  0x80000000	/* MX53_PAD_EIM_D20__EMI_WEIM_D_20 */
-							464  0x80000000	/* MX53_PAD_EIM_D21__EMI_WEIM_D_21 */
-							471  0x80000000	/* MX53_PAD_EIM_D22__EMI_WEIM_D_22 */
-							477  0x80000000	/* MX53_PAD_EIM_D23__EMI_WEIM_D_23 */
-							492  0x80000000	/* MX53_PAD_EIM_D24__EMI_WEIM_D_24 */
-							500  0x80000000	/* MX53_PAD_EIM_D25__EMI_WEIM_D_25 */
-							508  0x80000000	/* MX53_PAD_EIM_D26__EMI_WEIM_D_26 */
-							516  0x80000000	/* MX53_PAD_EIM_D27__EMI_WEIM_D_27 */
-							524  0x80000000	/* MX53_PAD_EIM_D28__EMI_WEIM_D_28 */
-							532  0x80000000	/* MX53_PAD_EIM_D29__EMI_WEIM_D_29 */
-							540  0x80000000	/* MX53_PAD_EIM_D30__EMI_WEIM_D_30 */
-							548  0x80000000	/* MX53_PAD_EIM_D31__EMI_WEIM_D_31 */
-							637  0x80000000	/* MX53_PAD_EIM_DA0__EMI_NAND_WEIM_DA_0 */
-							642  0x80000000	/* MX53_PAD_EIM_DA1__EMI_NAND_WEIM_DA_1 */
-							647  0x80000000	/* MX53_PAD_EIM_DA2__EMI_NAND_WEIM_DA_2 */
-							652  0x80000000	/* MX53_PAD_EIM_DA3__EMI_NAND_WEIM_DA_3 */
-							657  0x80000000	/* MX53_PAD_EIM_DA4__EMI_NAND_WEIM_DA_4 */
-							662  0x80000000	/* MX53_PAD_EIM_DA5__EMI_NAND_WEIM_DA_5 */
-							667  0x80000000	/* MX53_PAD_EIM_DA6__EMI_NAND_WEIM_DA_6 */
-							611  0x80000000	/* MX53_PAD_EIM_OE__EMI_WEIM_OE */
-							616  0x80000000	/* MX53_PAD_EIM_RW__EMI_WEIM_RW */
-							607  0x80000000	/* MX53_PAD_EIM_CS1__EMI_WEIM_CS_1 */
-						>;
-					};
-				};
-			};
-
-			uart1: serial@53fbc000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&pinctrl_uart1_2>;
-				status = "okay";
-			};
-		};
-	};
-
 	eim-cs1@f4000000 {
 		#address-cells = <1>;
 		#size-cells = <1>;
@@ -162,3 +96,63 @@
 		};
 	};
 };
+
+&esdhc1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_esdhc1_2>;
+	cd-gpios = <&gpio1 1 0>;
+	wp-gpios = <&gpio1 9 0>;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_hog>;
+
+	hog {
+		pinctrl_hog: hoggrp {
+			fsl,pins = <
+				1077 0x80000000	/* MX53_PAD_GPIO_1__GPIO1_1 */
+				1085 0x80000000	/* MX53_PAD_GPIO_9__GPIO1_9 */
+				486  0x80000000	/* MX53_PAD_EIM_EB3__GPIO2_31 */
+				739  0x80000000	/* MX53_PAD_GPIO_10__GPIO4_0 */
+				218  0x80000000	/* MX53_PAD_DISP0_DAT16__GPIO5_10 */
+				226  0x80000000	/* MX53_PAD_DISP0_DAT17__GPIO5_11 */
+				233  0x80000000	/* MX53_PAD_DISP0_DAT18__GPIO5_12 */
+				241  0x80000000	/* MX53_PAD_DISP0_DAT19__GPIO5_13 */
+				429  0x80000000	/* MX53_PAD_EIM_D16__EMI_WEIM_D_16 */
+				435  0x80000000	/* MX53_PAD_EIM_D17__EMI_WEIM_D_17 */
+				441  0x80000000	/* MX53_PAD_EIM_D18__EMI_WEIM_D_18 */
+				448  0x80000000	/* MX53_PAD_EIM_D19__EMI_WEIM_D_19 */
+				456  0x80000000	/* MX53_PAD_EIM_D20__EMI_WEIM_D_20 */
+				464  0x80000000	/* MX53_PAD_EIM_D21__EMI_WEIM_D_21 */
+				471  0x80000000	/* MX53_PAD_EIM_D22__EMI_WEIM_D_22 */
+				477  0x80000000	/* MX53_PAD_EIM_D23__EMI_WEIM_D_23 */
+				492  0x80000000	/* MX53_PAD_EIM_D24__EMI_WEIM_D_24 */
+				500  0x80000000	/* MX53_PAD_EIM_D25__EMI_WEIM_D_25 */
+				508  0x80000000	/* MX53_PAD_EIM_D26__EMI_WEIM_D_26 */
+				516  0x80000000	/* MX53_PAD_EIM_D27__EMI_WEIM_D_27 */
+				524  0x80000000	/* MX53_PAD_EIM_D28__EMI_WEIM_D_28 */
+				532  0x80000000	/* MX53_PAD_EIM_D29__EMI_WEIM_D_29 */
+				540  0x80000000	/* MX53_PAD_EIM_D30__EMI_WEIM_D_30 */
+				548  0x80000000	/* MX53_PAD_EIM_D31__EMI_WEIM_D_31 */
+				637  0x80000000	/* MX53_PAD_EIM_DA0__EMI_NAND_WEIM_DA_0 */
+				642  0x80000000	/* MX53_PAD_EIM_DA1__EMI_NAND_WEIM_DA_1 */
+				647  0x80000000	/* MX53_PAD_EIM_DA2__EMI_NAND_WEIM_DA_2 */
+				652  0x80000000	/* MX53_PAD_EIM_DA3__EMI_NAND_WEIM_DA_3 */
+				657  0x80000000	/* MX53_PAD_EIM_DA4__EMI_NAND_WEIM_DA_4 */
+				662  0x80000000	/* MX53_PAD_EIM_DA5__EMI_NAND_WEIM_DA_5 */
+				667  0x80000000	/* MX53_PAD_EIM_DA6__EMI_NAND_WEIM_DA_6 */
+				611  0x80000000	/* MX53_PAD_EIM_OE__EMI_WEIM_OE */
+				616  0x80000000	/* MX53_PAD_EIM_RW__EMI_WEIM_RW */
+				607  0x80000000	/* MX53_PAD_EIM_CS1__EMI_WEIM_CS_1 */
+			>;
+		};
+	};
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1_2>;
+	status = "okay";
+};

arch/arm/boot/dts/imx53-evk.dts

@@ -21,107 +21,6 @@
 		reg = <0x70000000 0x80000000>;
 	};
 
-	soc {
-		aips@50000000 { /* AIPS1 */
-			spba@50000000 {
-				esdhc@50004000 { /* ESDHC1 */
-					pinctrl-names = "default";
-					pinctrl-0 = <&pinctrl_esdhc1_1>;
-					cd-gpios = <&gpio3 13 0>;
-					wp-gpios = <&gpio3 14 0>;
-					status = "okay";
-				};
-
-				ecspi@50010000 { /* ECSPI1 */
-					pinctrl-names = "default";
-					pinctrl-0 = <&pinctrl_ecspi1_1>;
-					fsl,spi-num-chipselects = <2>;
-					cs-gpios = <&gpio2 30 0>, <&gpio3 19 0>;
-					status = "okay";
-
-					flash: at45db321d@1 {
-						#address-cells = <1>;
-						#size-cells = <1>;
-						compatible = "atmel,at45db321d", "atmel,at45", "atmel,dataflash";
-						spi-max-frequency = <25000000>;
-						reg = <1>;
-
-						partition@0 {
-							label = "U-Boot";
-							reg = <0x0 0x40000>;
-							read-only;
-						};
-
-						partition@40000 {
-							label = "Kernel";
-							reg = <0x40000 0x3c0000>;
-						};
-					};
-				};
-
-				esdhc@50020000 { /* ESDHC3 */
-					pinctrl-names = "default";
-					pinctrl-0 = <&pinctrl_esdhc3_1>;
-					cd-gpios = <&gpio3 11 0>;
-					wp-gpios = <&gpio3 12 0>;
-					status = "okay";
-				};
-			};
-
-			iomuxc@53fa8000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&pinctrl_hog>;
-
-				hog {
-					pinctrl_hog: hoggrp {
-						fsl,pins = <
-							424  0x80000000	/* MX53_PAD_EIM_EB2__GPIO2_30 */
-							449  0x80000000	/* MX53_PAD_EIM_D19__GPIO3_19 */
-							693  0x80000000	/* MX53_PAD_EIM_DA11__GPIO3_11 */
-							697  0x80000000	/* MX53_PAD_EIM_DA12__GPIO3_12 */
-							701  0x80000000	/* MX53_PAD_EIM_DA13__GPIO3_13 */
-							705  0x80000000	/* MX53_PAD_EIM_DA14__GPIO3_14 */
-							868  0x80000000	/* MX53_PAD_PATA_DA_0__GPIO7_6 */
-							873  0x80000000	/* MX53_PAD_PATA_DA_1__GPIO7_7 */
-						>;
-					};
-				};
-			};
-
-			uart1: serial@53fbc000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&pinctrl_uart1_1>;
-				status = "okay";
-			};
-		};
-
-		aips@60000000 {	/* AIPS2 */
-			i2c@63fc4000 { /* I2C2 */
-				pinctrl-names = "default";
-				pinctrl-0 = <&pinctrl_i2c2_1>;
-				status = "okay";
-
-				pmic: mc13892@08 {
-					compatible = "fsl,mc13892", "fsl,mc13xxx";
-					reg = <0x08>;
-				};
-
-				codec: sgtl5000@0a {
-					compatible = "fsl,sgtl5000";
-					reg = <0x0a>;
-				};
-			};
-
-			ethernet@63fec000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&pinctrl_fec_1>;
-				phy-mode = "rmii";
-				phy-reset-gpios = <&gpio7 6 0>;
-				status = "okay";
-			};
-		};
-	};
-
 	leds {
 		compatible = "gpio-leds";
 
@@ -132,3 +31,96 @@
 		};
 	};
 };
+
+&esdhc1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_esdhc1_1>;
+	cd-gpios = <&gpio3 13 0>;
+	wp-gpios = <&gpio3 14 0>;
+	status = "okay";
+};
+
+&ecspi1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi1_1>;
+	fsl,spi-num-chipselects = <2>;
+	cs-gpios = <&gpio2 30 0>, <&gpio3 19 0>;
+	status = "okay";
+
+	flash: at45db321d@1 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "atmel,at45db321d", "atmel,at45", "atmel,dataflash";
+		spi-max-frequency = <25000000>;
+		reg = <1>;
+
+		partition@0 {
+			label = "U-Boot";
+			reg = <0x0 0x40000>;
+			read-only;
+		};
+
+		partition@40000 {
+			label = "Kernel";
+			reg = <0x40000 0x3c0000>;
+		};
+	};
+};
+
+&esdhc3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_esdhc3_1>;
+	cd-gpios = <&gpio3 11 0>;
+	wp-gpios = <&gpio3 12 0>;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_hog>;
+
+	hog {
+		pinctrl_hog: hoggrp {
+			fsl,pins = <
+				424  0x80000000	/* MX53_PAD_EIM_EB2__GPIO2_30 */
+				449  0x80000000	/* MX53_PAD_EIM_D19__GPIO3_19 */
+				693  0x80000000	/* MX53_PAD_EIM_DA11__GPIO3_11 */
+				697  0x80000000	/* MX53_PAD_EIM_DA12__GPIO3_12 */
+				701  0x80000000	/* MX53_PAD_EIM_DA13__GPIO3_13 */
+				705  0x80000000	/* MX53_PAD_EIM_DA14__GPIO3_14 */
+				868  0x80000000	/* MX53_PAD_PATA_DA_0__GPIO7_6 */
+				873  0x80000000	/* MX53_PAD_PATA_DA_1__GPIO7_7 */
+			>;
+		};
+	};
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1_1>;
+	status = "okay";
+};
+
+&i2c2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c2_1>;
+	status = "okay";
+
+	pmic: mc13892@08 {
+		compatible = "fsl,mc13892", "fsl,mc13xxx";
+		reg = <0x08>;
+	};
+
+	codec: sgtl5000@0a {
+		compatible = "fsl,sgtl5000";
+		reg = <0x0a>;
+	};
+};
+
+&fec {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_fec_1>;
+	phy-mode = "rmii";
+	phy-reset-gpios = <&gpio7 6 0>;
+	status = "okay";
+};

arch/arm/boot/dts/imx53-mba53.dts

@@ -0,0 +1,130 @@
+/*
+ * Copyright 2012 Sascha Hauer <s.hauer@pengutronix.de>, Pengutronix
+ * Copyright 2012 Steffen Trumtrar <s.trumtrar@pengutronix.de>, Pengutronix
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+/dts-v1/;
+/include/ "imx53-tqma53.dtsi"
+
+/ {
+	model = "TQ MBa53 starter kit";
+	compatible = "tq,mba53", "tq,tqma53", "fsl,imx53";
+};
+
+&iomuxc {
+	lvds1 {
+		pinctrl_lvds1_1: lvds1-grp1 {
+			fsl,pins = <730 0x10000		/* LVDS0_TX3 */
+				    732 0x10000		/* LVDS0_CLK */
+				    734 0x10000		/* LVDS0_TX2 */
+				    736 0x10000		/* LVDS0_TX1 */
+				    738 0x10000>;	/* LVDS0_TX0 */
+		};
+
+		pinctrl_lvds1_2: lvds1-grp2 {
+			fsl,pins = <720 0x10000		/* LVDS1_TX3 */
+				    722 0x10000		/* LVDS1_TX2 */
+				    724 0x10000		/* LVDS1_CLK */
+				    726 0x10000		/* LVDS1_TX1 */
+				    728 0x10000>;	/* LVDS1_TX0 */
+		};
+	};
+
+	disp1 {
+		pinctrl_disp1_1: disp1-grp1 {
+			fsl,pins = <689 0x10000		/* DISP1_DRDY	*/
+				    482 0x10000		/* DISP1_HSYNC	*/
+				    489 0x10000		/* DISP1_VSYNC	*/
+				    684 0x10000		/* DISP1_DAT_0	*/
+				    515 0x10000		/* DISP1_DAT_22	*/
+				    523 0x10000		/* DISP1_DAT_23	*/
+				    543 0x10000		/* DISP1_DAT_21	*/
+				    553 0x10000		/* DISP1_DAT_20	*/
+				    558 0x10000		/* DISP1_DAT_19	*/
+				    564 0x10000		/* DISP1_DAT_18	*/
+				    570 0x10000		/* DISP1_DAT_17	*/
+				    575 0x10000		/* DISP1_DAT_16	*/
+				    580 0x10000		/* DISP1_DAT_15	*/
+				    585 0x10000		/* DISP1_DAT_14	*/
+				    590 0x10000		/* DISP1_DAT_13	*/
+				    595 0x10000		/* DISP1_DAT_12	*/
+				    628 0x10000		/* DISP1_DAT_11	*/
+				    634 0x10000		/* DISP1_DAT_10	*/
+				    639 0x10000		/* DISP1_DAT_9	*/
+				    644 0x10000		/* DISP1_DAT_8	*/
+				    649 0x10000		/* DISP1_DAT_7	*/
+				    654 0x10000		/* DISP1_DAT_6	*/
+				    659 0x10000		/* DISP1_DAT_5	*/
+				    664 0x10000		/* DISP1_DAT_4	*/
+				    669 0x10000		/* DISP1_DAT_3	*/
+				    674 0x10000		/* DISP1_DAT_2	*/
+				    679 0x10000		/* DISP1_DAT_1	*/
+				    684 0x10000>;	/* DISP1_DAT_0	*/
+		};
+	};
+};
+
+&cspi {
+	status = "okay";
+};
+
+&i2c2 {
+	codec: sgtl5000@a {
+		compatible = "fsl,sgtl5000";
+		reg = <0x0a>;
+	};
+
+	expander: pca9554@20 {
+		compatible = "pca9554";
+		reg = <0x20>;
+		interrupts = <109>;
+	};
+
+	sensor2: lm75@49 {
+		compatible = "lm75";
+		reg = <0x49>;
+	};
+};
+
+&fec {
+	status = "okay";
+};
+
+&esdhc2 {
+	status = "okay";
+};
+
+&uart3 {
+	status = "okay";
+};
+
+&ecspi1 {
+	status = "okay";
+};
+
+&uart1 {
+	status = "okay";
+};
+
+&uart2 {
+	status = "okay";
+};
+
+&can1 {
+	status = "okay";
+};
+
+&can2 {
+	status = "okay";
+};
+
+&i2c3 {
+	status = "okay";
+};

arch/arm/boot/dts/imx53-qsb.dts

@@ -21,200 +21,6 @@
 		reg = <0x70000000 0x40000000>;
 	};
 
-	soc {
-		aips@50000000 { /* AIPS1 */
-			spba@50000000 {
-				esdhc@50004000 { /* ESDHC1 */
-					pinctrl-names = "default";
-					pinctrl-0 = <&pinctrl_esdhc1_1>;
-					cd-gpios = <&gpio3 13 0>;
-					status = "okay";
-				};
-
-				ssi2: ssi@50014000 {
-					fsl,mode = "i2s-slave";
-					status = "okay";
-				};
-
-				esdhc@50020000 { /* ESDHC3 */
-					pinctrl-names = "default";
-					pinctrl-0 = <&pinctrl_esdhc3_1>;
-					cd-gpios = <&gpio3 11 0>;
-					wp-gpios = <&gpio3 12 0>;
-					status = "okay";
-				};
-			};
-
-			iomuxc@53fa8000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&pinctrl_hog>;
-
-				hog {
-					pinctrl_hog: hoggrp {
-						fsl,pins = <
-							1071 0x80000000	/* MX53_PAD_GPIO_0__CCM_SSI_EXT1_CLK */
-							1141 0x80000000	/* MX53_PAD_GPIO_8__GPIO1_8 */
-							982  0x80000000	/* MX53_PAD_PATA_DATA14__GPIO2_14 */
-							989  0x80000000	/* MX53_PAD_PATA_DATA15__GPIO2_15 */
-							693  0x80000000	/* MX53_PAD_EIM_DA11__GPIO3_11 */
-							697  0x80000000	/* MX53_PAD_EIM_DA12__GPIO3_12 */
-							701  0x80000000	/* MX53_PAD_EIM_DA13__GPIO3_13 */
-							868  0x80000000	/* MX53_PAD_PATA_DA_0__GPIO7_6 */
-							1149 0x80000000 /* MX53_PAD_GPIO_16__GPIO7_11 */
-						>;
-					};
-
-					led_pin_gpio7_7: led_gpio7_7@0 {
-						fsl,pins = <
-							873  0x80000000	/* MX53_PAD_PATA_DA_1__GPIO7_7 */
-						>;
-					};
-				};
-
-			};
-
-			uart1: serial@53fbc000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&pinctrl_uart1_1>;
-				status = "okay";
-			};
-		};
-
-		aips@60000000 {	/* AIPS2 */
-			i2c@63fc4000 { /* I2C2 */
-				pinctrl-names = "default";
-				pinctrl-0 = <&pinctrl_i2c2_1>;
-				status = "okay";
-
-				sgtl5000: codec@0a {
-					compatible = "fsl,sgtl5000";
-					reg = <0x0a>;
-					VDDA-supply = <&reg_3p2v>;
-					VDDIO-supply = <&reg_3p2v>;
-				};
-			};
-
-			i2c@63fc8000 { /* I2C1 */
-				pinctrl-names = "default";
-				pinctrl-0 = <&pinctrl_i2c1_1>;
-				status = "okay";
-
-				accelerometer: mma8450@1c {
-					compatible = "fsl,mma8450";
-					reg = <0x1c>;
-				};
-
-				pmic: dialog@48 {
-					compatible = "dlg,da9053-aa", "dlg,da9052";
-					reg = <0x48>;
-					interrupt-parent = <&gpio7>;
-					interrupts = <11 0x8>; /* low-level active IRQ at GPIO7_11 */
-
-					regulators {
-						buck1_reg: buck1 {
-							regulator-min-microvolt = <500000>;
-							regulator-max-microvolt = <2075000>;
-							regulator-always-on;
-						};
-
-						buck2_reg: buck2 {
-							regulator-min-microvolt = <500000>;
-							regulator-max-microvolt = <2075000>;
-							regulator-always-on;
-						};
-
-						buck3_reg: buck3 {
-							regulator-min-microvolt = <925000>;
-					                regulator-max-microvolt = <2500000>;
-							regulator-always-on;
-						};
-
-						buck4_reg: buck4 {
-							regulator-min-microvolt = <925000>;
-					                regulator-max-microvolt = <2500000>;
-							regulator-always-on;
-						};
-
-						ldo1_reg: ldo1 {
-							regulator-min-microvolt = <600000>;
-							regulator-max-microvolt = <1800000>;
-							regulator-boot-on;
-							regulator-always-on;
-						};
-
-						ldo2_reg: ldo2 {
-							regulator-min-microvolt = <600000>;
-							regulator-max-microvolt = <1800000>;
-							regulator-always-on;
-						};
-
-						ldo3_reg: ldo3 {
-							regulator-min-microvolt = <600000>;
-					                regulator-max-microvolt = <1800000>;
-							regulator-always-on;
-						};
-
-						ldo4_reg: ldo4 {
-							regulator-min-microvolt = <1725000>;
-					                regulator-max-microvolt = <3300000>;
-							regulator-always-on;
-						};
-
-						ldo5_reg: ldo5 {
-							regulator-min-microvolt = <1725000>;
-					                regulator-max-microvolt = <3300000>;
-							regulator-always-on;
-						};
-
-						ldo6_reg: ldo6 {
-							regulator-min-microvolt = <1200000>;
-					                regulator-max-microvolt = <3600000>;
-							regulator-always-on;
-						};
-
-						ldo7_reg: ldo7 {
-							regulator-min-microvolt = <1200000>;
-					                regulator-max-microvolt = <3600000>;
-							regulator-always-on;
-						};
-
-						ldo8_reg: ldo8 {
-							regulator-min-microvolt = <1200000>;
-					                regulator-max-microvolt = <3600000>;
-							regulator-always-on;
-						};
-
-						ldo9_reg: ldo9 {
-							regulator-min-microvolt = <1200000>;
-					                regulator-max-microvolt = <3600000>;
-							regulator-always-on;
-						};
-
-						ldo10_reg: ldo10 {
-							regulator-min-microvolt = <1250000>;
-					                regulator-max-microvolt = <3650000>;
-							regulator-always-on;
-						};
-					};
-				};
-			};
-
-			audmux@63fd0000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&pinctrl_audmux_1>;
-				status = "okay";
-			};
-
-			ethernet@63fec000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&pinctrl_fec_1>;
-				phy-mode = "rmii";
-				phy-reset-gpios = <&gpio7 6 0>;
-				status = "okay";
-			};
-		};
-	};
-
 	gpio-keys {
 		compatible = "gpio-keys";
 
@@ -276,3 +82,189 @@
 		mux-ext-port = <5>;
 	};
 };
+
+&esdhc1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_esdhc1_1>;
+	cd-gpios = <&gpio3 13 0>;
+	status = "okay";
+};
+
+&ssi2 {
+	fsl,mode = "i2s-slave";
+	status = "okay";
+};
+
+&esdhc3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_esdhc3_1>;
+	cd-gpios = <&gpio3 11 0>;
+	wp-gpios = <&gpio3 12 0>;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_hog>;
+
+	hog {
+		pinctrl_hog: hoggrp {
+			fsl,pins = <
+				1071 0x80000000	/* MX53_PAD_GPIO_0__CCM_SSI_EXT1_CLK */
+				1141 0x80000000	/* MX53_PAD_GPIO_8__GPIO1_8 */
+				982  0x80000000	/* MX53_PAD_PATA_DATA14__GPIO2_14 */
+				989  0x80000000	/* MX53_PAD_PATA_DATA15__GPIO2_15 */
+				693  0x80000000	/* MX53_PAD_EIM_DA11__GPIO3_11 */
+				697  0x80000000	/* MX53_PAD_EIM_DA12__GPIO3_12 */
+				701  0x80000000	/* MX53_PAD_EIM_DA13__GPIO3_13 */
+				868  0x80000000	/* MX53_PAD_PATA_DA_0__GPIO7_6 */
+				1149 0x80000000 /* MX53_PAD_GPIO_16__GPIO7_11 */
+			>;
+		};
+
+		led_pin_gpio7_7: led_gpio7_7@0 {
+			fsl,pins = <
+				873  0x80000000	/* MX53_PAD_PATA_DA_1__GPIO7_7 */
+			>;
+		};
+	};
+
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1_1>;
+	status = "okay";
+};
+
+&i2c2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c2_1>;
+	status = "okay";
+
+	sgtl5000: codec@0a {
+		compatible = "fsl,sgtl5000";
+		reg = <0x0a>;
+		VDDA-supply = <&reg_3p2v>;
+		VDDIO-supply = <&reg_3p2v>;
+	};
+};
+
+&i2c1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c1_1>;
+	status = "okay";
+
+	accelerometer: mma8450@1c {
+		compatible = "fsl,mma8450";
+		reg = <0x1c>;
+	};
+
+	pmic: dialog@48 {
+		compatible = "dlg,da9053-aa", "dlg,da9052";
+		reg = <0x48>;
+		interrupt-parent = <&gpio7>;
+		interrupts = <11 0x8>; /* low-level active IRQ at GPIO7_11 */
+
+		regulators {
+			buck1_reg: buck1 {
+				regulator-min-microvolt = <500000>;
+				regulator-max-microvolt = <2075000>;
+				regulator-always-on;
+			};
+
+			buck2_reg: buck2 {
+				regulator-min-microvolt = <500000>;
+				regulator-max-microvolt = <2075000>;
+				regulator-always-on;
+			};
+
+			buck3_reg: buck3 {
+				regulator-min-microvolt = <925000>;
+				regulator-max-microvolt = <2500000>;
+				regulator-always-on;
+			};
+
+			buck4_reg: buck4 {
+				regulator-min-microvolt = <925000>;
+				regulator-max-microvolt = <2500000>;
+				regulator-always-on;
+			};
+
+			ldo1_reg: ldo1 {
+				regulator-min-microvolt = <600000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldo2_reg: ldo2 {
+				regulator-min-microvolt = <600000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+			};
+
+			ldo3_reg: ldo3 {
+				regulator-min-microvolt = <600000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+			};
+
+			ldo4_reg: ldo4 {
+				regulator-min-microvolt = <1725000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			ldo5_reg: ldo5 {
+				regulator-min-microvolt = <1725000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			ldo6_reg: ldo6 {
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <3600000>;
+				regulator-always-on;
+			};
+
+			ldo7_reg: ldo7 {
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <3600000>;
+				regulator-always-on;
+			};
+
+			ldo8_reg: ldo8 {
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <3600000>;
+				regulator-always-on;
+			};
+
+			ldo9_reg: ldo9 {
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <3600000>;
+				regulator-always-on;
+			};
+
+			ldo10_reg: ldo10 {
+				regulator-min-microvolt = <1250000>;
+				regulator-max-microvolt = <3650000>;
+				regulator-always-on;
+			};
+		};
+	};
+};
+
+&audmux {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_audmux_1>;
+	status = "okay";
+};
+
+&fec {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_fec_1>;
+	phy-mode = "rmii";
+	phy-reset-gpios = <&gpio7 6 0>;
+	status = "okay";
+};

arch/arm/boot/dts/imx53-smd.dts

@@ -21,157 +21,6 @@
 		reg = <0x70000000 0x40000000>;
 	};
 
-	soc {
-		aips@50000000 { /* AIPS1 */
-			spba@50000000 {
-				esdhc@50004000 { /* ESDHC1 */
-					pinctrl-names = "default";
-					pinctrl-0 = <&pinctrl_esdhc1_1>;
-					cd-gpios = <&gpio3 13 0>;
-					wp-gpios = <&gpio4 11 0>;
-					status = "okay";
-				};
-
-				esdhc@50008000 { /* ESDHC2 */
-					pinctrl-names = "default";
-					pinctrl-0 = <&pinctrl_esdhc2_1>;
-					non-removable;
-					status = "okay";
-				};
-
-				uart3: serial@5000c000 {
-					pinctrl-names = "default";
-					pinctrl-0 = <&pinctrl_uart3_1>;
-					fsl,uart-has-rtscts;
-					status = "okay";
-				};
-
-				ecspi@50010000 { /* ECSPI1 */
-					pinctrl-names = "default";
-					pinctrl-0 = <&pinctrl_ecspi1_1>;
-					fsl,spi-num-chipselects = <2>;
-					cs-gpios = <&gpio2 30 0>, <&gpio3 19 0>;
-					status = "okay";
-
-					zigbee: mc1323@0 {
-						compatible = "fsl,mc1323";
-						spi-max-frequency = <8000000>;
-						reg = <0>;
-					};
-
-					flash: m25p32@1 {
-						#address-cells = <1>;
-						#size-cells = <1>;
-						compatible = "st,m25p32", "st,m25p";
-						spi-max-frequency = <20000000>;
-						reg = <1>;
-
-						partition@0 {
-							label = "U-Boot";
-							reg = <0x0 0x40000>;
-							read-only;
-						};
-
-						partition@40000 {
-							label = "Kernel";
-							reg = <0x40000 0x3c0000>;
-						};
-					};
-				};
-
-				esdhc@50020000 { /* ESDHC3 */
-					pinctrl-names = "default";
-					pinctrl-0 = <&pinctrl_esdhc3_1>;
-					non-removable;
-					status = "okay";
-				};
-			};
-
-			iomuxc@53fa8000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&pinctrl_hog>;
-
-				hog {
-					pinctrl_hog: hoggrp {
-						fsl,pins = <
-							982  0x80000000	/* MX53_PAD_PATA_DATA14__GPIO2_14 */
-							989  0x80000000	/* MX53_PAD_PATA_DATA15__GPIO2_15 */
-							424  0x80000000	/* MX53_PAD_EIM_EB2__GPIO2_30 */
-							701  0x80000000	/* MX53_PAD_EIM_DA13__GPIO3_13 */
-							449  0x80000000	/* MX53_PAD_EIM_D19__GPIO3_19 */
-							43   0x80000000	/* MX53_PAD_KEY_ROW2__GPIO4_11 */
-							868  0x80000000	/* MX53_PAD_PATA_DA_0__GPIO7_6 */
-						>;
-					};
-				};
-			};
-
-			uart1: serial@53fbc000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&pinctrl_uart1_1>;
-				status = "okay";
-			};
-
-			uart2: serial@53fc0000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&pinctrl_uart2_1>;
-				status = "okay";
-			};
-		};
-
-		aips@60000000 {	/* AIPS2 */
-			i2c@63fc4000 { /* I2C2 */
-				pinctrl-names = "default";
-				pinctrl-0 = <&pinctrl_i2c2_1>;
-				status = "okay";
-
-				codec: sgtl5000@0a {
-					compatible = "fsl,sgtl5000";
-					reg = <0x0a>;
-				};
-
-				magnetometer: mag3110@0e {
-					compatible = "fsl,mag3110";
-					reg = <0x0e>;
-				};
-
-				touchkey: mpr121@5a {
-					compatible = "fsl,mpr121";
-					reg = <0x5a>;
-				};
-			};
-
-			i2c@63fc8000 { /* I2C1 */
-				pinctrl-names = "default";
-				pinctrl-0 = <&pinctrl_i2c1_1>;
-				status = "okay";
-
-				accelerometer: mma8450@1c {
-					compatible = "fsl,mma8450";
-					reg = <0x1c>;
-				};
-
-				camera: ov5642@3c {
-					compatible = "ovti,ov5642";
-					reg = <0x3c>;
-				};
-
-				pmic: dialog@48 {
-					compatible = "dialog,da9053", "dialog,da9052";
-					reg = <0x48>;
-				};
-			};
-
-			ethernet@63fec000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&pinctrl_fec_1>;
-				phy-mode = "rmii";
-				phy-reset-gpios = <&gpio7 6 0>;
-				status = "okay";
-			};
-		};
-	};
-
 	gpio-keys {
 		compatible = "gpio-keys";
 
@@ -188,3 +37,146 @@
 		};
 	};
 };
+
+&esdhc1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_esdhc1_1>;
+	cd-gpios = <&gpio3 13 0>;
+	wp-gpios = <&gpio4 11 0>;
+	status = "okay";
+};
+
+&esdhc2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_esdhc2_1>;
+	non-removable;
+	status = "okay";
+};
+
+&uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart3_1>;
+	fsl,uart-has-rtscts;
+	status = "okay";
+};
+
+&ecspi1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi1_1>;
+	fsl,spi-num-chipselects = <2>;
+	cs-gpios = <&gpio2 30 0>, <&gpio3 19 0>;
+	status = "okay";
+
+	zigbee: mc1323@0 {
+		compatible = "fsl,mc1323";
+		spi-max-frequency = <8000000>;
+		reg = <0>;
+	};
+
+	flash: m25p32@1 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "st,m25p32", "st,m25p";
+		spi-max-frequency = <20000000>;
+		reg = <1>;
+
+		partition@0 {
+			label = "U-Boot";
+			reg = <0x0 0x40000>;
+			read-only;
+		};
+
+		partition@40000 {
+			label = "Kernel";
+			reg = <0x40000 0x3c0000>;
+		};
+	};
+};
+
+&esdhc3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_esdhc3_1>;
+	non-removable;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_hog>;
+
+	hog {
+		pinctrl_hog: hoggrp {
+			fsl,pins = <
+				982  0x80000000	/* MX53_PAD_PATA_DATA14__GPIO2_14 */
+				989  0x80000000	/* MX53_PAD_PATA_DATA15__GPIO2_15 */
+				424  0x80000000	/* MX53_PAD_EIM_EB2__GPIO2_30 */
+				701  0x80000000	/* MX53_PAD_EIM_DA13__GPIO3_13 */
+				449  0x80000000	/* MX53_PAD_EIM_D19__GPIO3_19 */
+				43   0x80000000	/* MX53_PAD_KEY_ROW2__GPIO4_11 */
+				868  0x80000000	/* MX53_PAD_PATA_DA_0__GPIO7_6 */
+			>;
+		};
+	};
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1_1>;
+	status = "okay";
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2_1>;
+	status = "okay";
+};
+
+&i2c2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c2_1>;
+	status = "okay";
+
+	codec: sgtl5000@0a {
+		compatible = "fsl,sgtl5000";
+		reg = <0x0a>;
+	};
+
+	magnetometer: mag3110@0e {
+		compatible = "fsl,mag3110";
+		reg = <0x0e>;
+	};
+
+	touchkey: mpr121@5a {
+		compatible = "fsl,mpr121";
+		reg = <0x5a>;
+	};
+};
+
+&i2c1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c1_1>;
+	status = "okay";
+
+	accelerometer: mma8450@1c {
+		compatible = "fsl,mma8450";
+		reg = <0x1c>;
+	};
+
+	camera: ov5642@3c {
+		compatible = "ovti,ov5642";
+		reg = <0x3c>;
+	};
+
+	pmic: dialog@48 {
+		compatible = "dialog,da9053", "dialog,da9052";
+		reg = <0x48>;
+	};
+};
+
+&fec {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_fec_1>;
+	phy-mode = "rmii";
+	phy-reset-gpios = <&gpio7 6 0>;
+	status = "okay";
+};

arch/arm/boot/dts/imx53-tqma53.dtsi

@@ -0,0 +1,172 @@
+/*
+ * Copyright 2012 Sascha Hauer <s.hauer@pengutronix.de>, Pengutronix
+ * Copyright 2012 Steffen Trumtrar <s.trumtrar@pengutronix.de>, Pengutronix
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+/include/ "imx53.dtsi"
+
+/ {
+	model = "TQ TQMa53";
+	compatible = "tq,tqma53", "fsl,imx53";
+
+	memory {
+		reg = <0x70000000 0x40000000>; /* Up to 1GiB */
+	};
+
+	regulators {
+		compatible = "simple-bus";
+
+		reg_3p3v: 3p3v {
+			compatible = "regulator-fixed";
+			regulator-name = "3P3V";
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3300000>;
+			regulator-always-on;
+		};
+	};
+};
+
+&esdhc2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_esdhc2_1>;
+	wp-gpios = <&gpio1 2 0>;
+	cd-gpios = <&gpio1 4 0>;
+	status = "disabled";
+};
+
+&uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart3_2>;
+	status = "disabled";
+};
+
+&ecspi1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi1_1>;
+	fsl,spi-num-chipselects = <4>;
+	cs-gpios = <&gpio2 30 0>, <&gpio3 19 0>,
+		   <&gpio3 24 0>, <&gpio3 25 0>;
+	status = "disabled";
+};
+
+&esdhc3 { /* EMMC */
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_esdhc3_1>;
+	vmmc-supply = <&reg_3p3v>;
+	non-removable;
+	bus-width = <8>;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_hog>;
+
+	i2s {
+		pinctrl_i2s_1: i2s-grp1 {
+			fsl,pins = <
+				 1   0x10000	/* I2S_MCLK */
+				 10  0x10000	/* I2S_SCLK */
+				 17  0x10000	/* I2S_DOUT */
+				 23  0x10000	/* I2S_LRCLK*/
+				 30  0x10000	/* I2S_DIN  */
+			>;
+		};
+	};
+
+	hog {
+		pinctrl_hog: hoggrp {
+			fsl,pins = <
+				 610  0x10000	/* MX53_PAD_EIM_CS1__IPU_DI1_PIN6 (VSYNC)*/
+				 711  0x10000	/* MX53_PAD_EIM_DA15__IPU_DI1_PIN4 (HSYNC)*/
+				 873  0x10000	/* MX53_PAD_PATA_DA_1__GPIO7_7 (LCD_BLT_EN)*/
+				 878  0x10000	/* MX53_PAD_PATA_DA_2__GPIO7_8 (LCD_RESET)*/
+				 922  0x10000	/* MX53_PAD_PATA_DATA5__GPIO2_5 (LCD_POWER)*/
+				 928  0x10000	/* MX53_PAD_PATA_DATA6__GPIO2_6 (PMIC_INT)*/
+				 982  0x10000	/* MX53_PAD_PATA_DATA14__GPIO2_14 (CSI_RST)*/
+				 989  0x10000	/* MX53_PAD_PATA_DATA15__GPIO2_15 (CSI_PWDN)*/
+				 1069 0x10000	/* MX53_PAD_GPIO_0__GPIO1_0 (SYSTEM_DOWN)*/
+				 1093 0x10000	/* MX53_PAD_GPIO_3__GPIO1_3 */
+			>;
+		};
+	};
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1_2>;
+	fsl,uart-has-rtscts;
+	status = "disabled";
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2_1>;
+	status = "disabled";
+};
+
+&can1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_can1_2>;
+	status = "disabled";
+};
+
+&can2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_can2_1>;
+	status = "disabled";
+};
+
+&i2c3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c3_1>;
+	status = "disabled";
+};
+
+&cspi {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_cspi_1>;
+	fsl,spi-num-chipselects = <3>;
+	cs-gpios = <&gpio1 18 0>, <&gpio1 19 0>,
+		   <&gpio1 21 0>;
+	status = "disabled";
+};
+
+&i2c2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c2_1>;
+	status = "okay";
+
+	pmic: mc34708@8 {
+		compatible = "fsl,mc34708";
+		reg = <0x8>;
+		fsl,mc13xxx-uses-rtc;
+		interrupt-parent = <&gpio2>;
+		interrupts = <6 8>; /* PDATA_DATA6, low active */
+	};
+
+	sensor1: lm75@48 {
+		compatible = "lm75";
+		reg = <0x48>;
+	};
+
+	eeprom: 24c64@50 {
+		compatible = "at,24c64";
+		pagesize = <32>;
+		reg = <0x50>;
+	};
+};
+
+&fec {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_fec_1>;
+	phy-mode = "rmii";
+	status = "disabled";
+};

arch/arm/boot/dts/imx53.dtsi

@@ -274,6 +274,44 @@
 					};
 				};
 
+				csi {
+					pinctrl_csi_1: csigrp-1 {
+						fsl,pins = <
+							286 0x1d5	/* MX53_PAD_CSI0_DATA_EN__IPU_CSI0_DATA_EN */
+							291 0x1d5	/* MX53_PAD_CSI0_VSYNC__IPU_CSI0_VSYNC */
+							280 0x1d5	/* MX53_PAD_CSI0_MCLK__IPU_CSI0_HSYNC */
+							276 0x1d5	/* MX53_PAD_CSI0_PIXCLK__IPU_CSI0_PIXCLK */
+							409 0x1d5	/* MX53_PAD_CSI0_DAT19__IPU_CSI0_D_19 */
+							402 0x1d5	/* MX53_PAD_CSI0_DAT18__IPU_CSI0_D_18 */
+							395 0x1d5	/* MX53_PAD_CSI0_DAT17__IPU_CSI0_D_17 */
+							388 0x1d5	/* MX53_PAD_CSI0_DAT16__IPU_CSI0_D_16 */
+							381 0x1d5	/* MX53_PAD_CSI0_DAT15__IPU_CSI0_D_15 */
+							374 0x1d5	/* MX53_PAD_CSI0_DAT14__IPU_CSI0_D_14 */
+							367 0x1d5	/* MX53_PAD_CSI0_DAT13__IPU_CSI0_D_13 */
+							360 0x1d5	/* MX53_PAD_CSI0_DAT12__IPU_CSI0_D_12 */
+							352 0x1d5	/* MX53_PAD_CSI0_DAT11__IPU_CSI0_D_11 */
+							344 0x1d5	/* MX53_PAD_CSI0_DAT10__IPU_CSI0_D_10 */
+							336 0x1d5	/* MX53_PAD_CSI0_DAT9__IPU_CSI0_D_9 */
+							328 0x1d5	/* MX53_PAD_CSI0_DAT8__IPU_CSI0_D_8 */
+							320 0x1d5	/* MX53_PAD_CSI0_DAT7__IPU_CSI0_D_7 */
+							312 0x1d5	/* MX53_PAD_CSI0_DAT6__IPU_CSI0_D_6 */
+							304 0x1d5	/* MX53_PAD_CSI0_DAT5__IPU_CSI0_D_5 */
+							296 0x1d5	/* MX53_PAD_CSI0_DAT4__IPU_CSI0_D_4 */
+							276 0x1d5	/* MX53_PAD_CSI0_PIXCLK__IPU_CSI0_PIXCLK */
+						>;
+					};
+				};
+
+				cspi {
+					pinctrl_cspi_1: cspigrp-1 {
+						fsl,pins = <
+							998  0x1d5	/* MX53_PAD_SD1_DATA0__CSPI_MISO */
+							1008 0x1d5	/* MX53_PAD_SD1_CMD__CSPI_MOSI */
+							1022 0x1d5	/* MX53_PAD_SD1_CLK__CSPI_SCLK */
+						>;
+					};
+				};
+
 				ecspi1 {
 					pinctrl_ecspi1_1: ecspi1grp-1 {
 						fsl,pins = <
@@ -349,6 +387,13 @@
 							853 0x80000000  /* MX53_PAD_PATA_DIOR__CAN1_RXCAN */
 						>;
 					};
+
+					pinctrl_can1_2: can1grp-2 {
+						fsl,pins = <
+							37  0x80000000  /* MX53_PAD_KEY_COL2__CAN1_TXCAN */
+							44  0x80000000  /* MX53_PAD_KEY_ROW2__CAN1_RXCAN */
+						>;
+					};
 				};
 
 				can2 {
@@ -387,6 +432,14 @@
 					};
 				};
 
+				owire {
+					pinctrl_owire_1: owiregrp-1 {
+						fsl,pins = <
+								1166 0x80000000 /* MX53_PAD_GPIO_18__OWIRE_LINE */
+						>;
+					};
+				};
+
 				uart1 {
 					pinctrl_uart1_1: uart1grp-1 {
 						fsl,pins = <
@@ -421,6 +474,14 @@
 							880 0x1c5	/* MX53_PAD_PATA_DA_2__UART3_RTS */
 						>;
 					};
+
+					pinctrl_uart3_2: uart3grp-2 {
+						fsl,pins = <
+							884 0x1c5	/* MX53_PAD_PATA_CS_0__UART3_TXD_MUX */
+							888 0x1c5	/* MX53_PAD_PATA_CS_1__UART3_RXD_MUX */
+						>;
+					};
+
 				};
 
 				uart4 {
@@ -570,6 +631,13 @@
 				status = "disabled";
 			};
 
+			owire: owire@63fa4000 {
+				compatible = "fsl,imx53-owire", "fsl,imx21-owire";
+				reg = <0x63fa4000 0x4000>;
+				clocks = <&clks 159>;
+				status = "disabled";
+			};
+
 			ecspi2: ecspi@63fac000 {
 				#address-cells = <1>;
 				#size-cells = <0>;

arch/arm/boot/dts/imx6dl.dtsi

@@ -0,0 +1,59 @@
+/*
+ * Copyright 2013 Freescale Semiconductor, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+/include/ "imx6qdl.dtsi"
+
+/ {
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu@0 {
+			compatible = "arm,cortex-a9";
+			reg = <0>;
+			next-level-cache = <&L2>;
+		};
+
+		cpu@1 {
+			compatible = "arm,cortex-a9";
+			reg = <1>;
+			next-level-cache = <&L2>;
+		};
+	};
+
+	soc {
+		aips1: aips-bus@02000000 {
+			pxp: pxp@020f0000 {
+				reg = <0x020f0000 0x4000>;
+				interrupts = <0 98 0x04>;
+			};
+
+			epdc: epdc@020f4000 {
+				reg = <0x020f4000 0x4000>;
+				interrupts = <0 97 0x04>;
+			};
+
+			lcdif: lcdif@020f8000 {
+				reg = <0x020f8000 0x4000>;
+				interrupts = <0 39 0x04>;
+			};
+		};
+
+		aips2: aips-bus@02100000 {
+			i2c4: i2c@021f8000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,imx1-i2c";
+				reg = <0x021f8000 0x4000>;
+				interrupts = <0 35 0x04>;
+				status = "disabled";
+			};
+		};
+	};
+};

arch/arm/boot/dts/imx6q-arm2.dts

@@ -21,71 +21,6 @@
 		reg = <0x10000000 0x80000000>;
 	};
 
-	soc {
-		gpmi-nand@00112000 {
-			pinctrl-names = "default";
-			pinctrl-0 = <&pinctrl_gpmi_nand_1>;
-			status = "disabled"; /* gpmi nand conflicts with SD */
-		};
-
-		aips-bus@02000000 { /* AIPS1 */
-			iomuxc@020e0000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&pinctrl_hog>;
-
-				hog {
-					pinctrl_hog: hoggrp {
-						fsl,pins = <
-							176  0x80000000	/* MX6Q_PAD_EIM_D25__GPIO_3_25 */
-						>;
-					};
-				};
-
-				arm2 {
-					pinctrl_usdhc3_arm2: usdhc3grp-arm2 {
-						fsl,pins = <
-							1363 0x80000000	/* MX6Q_PAD_NANDF_CS0__GPIO_6_11 */
-							1369 0x80000000 /* MX6Q_PAD_NANDF_CS1__GPIO_6_14 */
-						>;
-					};
-				};
-			};
-		};
-
-		aips-bus@02100000 { /* AIPS2 */
-			ethernet@02188000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&pinctrl_enet_2>;
-				phy-mode = "rgmii";
-				status = "okay";
-			};
-
-			usdhc@02198000 { /* uSDHC3 */
-				cd-gpios = <&gpio6 11 0>;
-				wp-gpios = <&gpio6 14 0>;
-				vmmc-supply = <&reg_3p3v>;
-				pinctrl-names = "default";
-				pinctrl-0 = <&pinctrl_usdhc3_1
-					     &pinctrl_usdhc3_arm2>;
-				status = "okay";
-			};
-
-			usdhc@0219c000 { /* uSDHC4 */
-				non-removable;
-				vmmc-supply = <&reg_3p3v>;
-				pinctrl-names = "default";
-				pinctrl-0 = <&pinctrl_usdhc4_1>;
-				status = "okay";
-			};
-
-			uart4: serial@021f0000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&pinctrl_uart4_1>;
-				status = "okay";
-			};
-		};
-	};
-
 	regulators {
 		compatible = "simple-bus";
 
@@ -108,3 +43,62 @@
 		};
 	};
 };
+
+&gpmi {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_gpmi_nand_1>;
+	status = "disabled"; /* gpmi nand conflicts with SD */
+};
+
+&iomuxc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_hog>;
+
+	hog {
+		pinctrl_hog: hoggrp {
+			fsl,pins = <
+				176  0x80000000	/* MX6Q_PAD_EIM_D25__GPIO_3_25 */
+			>;
+		};
+	};
+
+	arm2 {
+		pinctrl_usdhc3_arm2: usdhc3grp-arm2 {
+			fsl,pins = <
+				1363 0x80000000	/* MX6Q_PAD_NANDF_CS0__GPIO_6_11 */
+				1369 0x80000000 /* MX6Q_PAD_NANDF_CS1__GPIO_6_14 */
+			>;
+		};
+	};
+};
+
+&fec {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_enet_2>;
+	phy-mode = "rgmii";
+	status = "okay";
+};
+
+&usdhc3 {
+	cd-gpios = <&gpio6 11 0>;
+	wp-gpios = <&gpio6 14 0>;
+	vmmc-supply = <&reg_3p3v>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc3_1
+		     &pinctrl_usdhc3_arm2>;
+	status = "okay";
+};
+
+&usdhc4 {
+	non-removable;
+	vmmc-supply = <&reg_3p3v>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc4_1>;
+	status = "okay";
+};
+
+&uart4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart4_1>;
+	status = "okay";
+};

arch/arm/boot/dts/imx6q-sabreauto.dts

@@ -20,45 +20,39 @@
 	memory {
 		reg = <0x10000000 0x80000000>;
 	};
+};
 
-	soc {
-		aips-bus@02000000 { /* AIPS1 */
-			iomuxc@020e0000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&pinctrl_hog>;
+&iomuxc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_hog>;
 
-				hog {
-					pinctrl_hog: hoggrp {
-						fsl,pins = <
-							1376 0x80000000	/* MX6Q_PAD_NANDF_CS2__GPIO_6_15 */
-							13   0x80000000	/* MX6Q_PAD_SD2_DAT2__GPIO_1_13 */
-						>;
-					};
-				};
-			};
+	hog {
+		pinctrl_hog: hoggrp {
+			fsl,pins = <
+				1376 0x80000000	/* MX6Q_PAD_NANDF_CS2__GPIO_6_15 */
+				13   0x80000000	/* MX6Q_PAD_SD2_DAT2__GPIO_1_13 */
+			>;
 		};
+	};
+};
 
-		aips-bus@02100000 { /* AIPS2 */
-			uart4: serial@021f0000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&pinctrl_uart4_1>;
-				status = "okay";
-			};
+&uart4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart4_1>;
+	status = "okay";
+};
 
-			ethernet@02188000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&pinctrl_enet_2>;
-				phy-mode = "rgmii";
-				status = "okay";
-			};
+&fec {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_enet_2>;
+	phy-mode = "rgmii";
+	status = "okay";
+};
 
-			usdhc@02198000 { /* uSDHC3 */
-				pinctrl-names = "default";
-				pinctrl-0 = <&pinctrl_usdhc3_1>;
-				cd-gpios = <&gpio6 15 0>;
-				wp-gpios = <&gpio1 13 0>;
-				status = "okay";
-			};
-		};
-	};
+&usdhc3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc3_1>;
+	cd-gpios = <&gpio6 15 0>;
+	wp-gpios = <&gpio1 13 0>;
+	status = "okay";
 };

arch/arm/boot/dts/imx6q-sabrelite.dts

@@ -21,118 +21,6 @@
 		reg = <0x10000000 0x40000000>;
 	};
 
-	soc {
-		aips-bus@02000000 { /* AIPS1 */
-			spba-bus@02000000 {
-				ecspi@02008000 { /* eCSPI1 */
-					fsl,spi-num-chipselects = <1>;
-					cs-gpios = <&gpio3 19 0>;
-					pinctrl-names = "default";
-					pinctrl-0 = <&pinctrl_ecspi1_1>;
-					status = "okay";
-
-					flash: m25p80@0 {
-						compatible = "sst,sst25vf016b";
-						spi-max-frequency = <20000000>;
-						reg = <0>;
-					};
-				};
-
-				ssi1: ssi@02028000 {
-					fsl,mode = "i2s-slave";
-					status = "okay";
-				};
-			};
-
-			iomuxc@020e0000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&pinctrl_hog>;
-
-				hog {
-					pinctrl_hog: hoggrp {
-						fsl,pins = <
-							1450 0x80000000	/* MX6Q_PAD_NANDF_D6__GPIO_2_6 */
-							1458 0x80000000	/* MX6Q_PAD_NANDF_D7__GPIO_2_7 */
-							121  0x80000000	/* MX6Q_PAD_EIM_D19__GPIO_3_19 */
-							144  0x80000000	/* MX6Q_PAD_EIM_D22__GPIO_3_22 */
-							152  0x80000000	/* MX6Q_PAD_EIM_D23__GPIO_3_23 */
-							1262 0x80000000 /* MX6Q_PAD_SD3_DAT5__GPIO_7_0 */
-							1270 0x1f0b0	/* MX6Q_PAD_SD3_DAT4__GPIO_7_1 */
-							953  0x80000000	/* MX6Q_PAD_GPIO_0__CCM_CLKO */
-						>;
-					};
-				};
-			};
-		};
-
-		aips-bus@02100000 { /* AIPS2 */
-			usb@02184000 { /* USB OTG */
-				vbus-supply = <&reg_usb_otg_vbus>;
-				pinctrl-names = "default";
-				pinctrl-0 = <&pinctrl_usbotg_1>;
-				disable-over-current;
-				status = "okay";
-			};
-
-			usb@02184200 { /* USB1 */
-				status = "okay";
-			};
-
-			ethernet@02188000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&pinctrl_enet_1>;
-				phy-mode = "rgmii";
-				phy-reset-gpios = <&gpio3 23 0>;
-				status = "okay";
-			};
-
-			usdhc@02198000 { /* uSDHC3 */
-				pinctrl-names = "default";
-				pinctrl-0 = <&pinctrl_usdhc3_2>;
-				cd-gpios = <&gpio7 0 0>;
-				wp-gpios = <&gpio7 1 0>;
-				vmmc-supply = <&reg_3p3v>;
-				status = "okay";
-			};
-
-			usdhc@0219c000 { /* uSDHC4 */
-				pinctrl-names = "default";
-				pinctrl-0 = <&pinctrl_usdhc4_2>;
-				cd-gpios = <&gpio2 6 0>;
-				wp-gpios = <&gpio2 7 0>;
-				vmmc-supply = <&reg_3p3v>;
-				status = "okay";
-			};
-
-			audmux@021d8000 {
-				status = "okay";
-				pinctrl-names = "default";
-				pinctrl-0 = <&pinctrl_audmux_1>;
-			};
-
-			uart2: serial@021e8000 {
-				status = "okay";
-				pinctrl-names = "default";
-				pinctrl-0 = <&pinctrl_uart2_1>;
-			};
-
-			i2c@021a0000 { /* I2C1 */
-				status = "okay";
-				clock-frequency = <100000>;
-				pinctrl-names = "default";
-				pinctrl-0 = <&pinctrl_i2c1_1>;
-
-				codec: sgtl5000@0a {
-					compatible = "fsl,sgtl5000";
-					reg = <0x0a>;
-					clocks = <&clks 169>;
-					VDDA-supply = <&reg_2p5v>;
-					VDDIO-supply = <&reg_3p3v>;
-				};
-			};
-		};
-	};
-
 	regulators {
 		compatible = "simple-bus";
 
@@ -176,3 +64,107 @@
 		mux-ext-port = <4>;
 	};
 };
+
+&ecspi1 {
+	fsl,spi-num-chipselects = <1>;
+	cs-gpios = <&gpio3 19 0>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi1_1>;
+	status = "okay";
+
+	flash: m25p80@0 {
+		compatible = "sst,sst25vf016b";
+		spi-max-frequency = <20000000>;
+		reg = <0>;
+	};
+};
+
+&ssi1 {
+	fsl,mode = "i2s-slave";
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_hog>;
+
+	hog {
+		pinctrl_hog: hoggrp {
+			fsl,pins = <
+				1450 0x80000000	/* MX6Q_PAD_NANDF_D6__GPIO_2_6 */
+				1458 0x80000000	/* MX6Q_PAD_NANDF_D7__GPIO_2_7 */
+				121  0x80000000	/* MX6Q_PAD_EIM_D19__GPIO_3_19 */
+				144  0x80000000	/* MX6Q_PAD_EIM_D22__GPIO_3_22 */
+				152  0x80000000	/* MX6Q_PAD_EIM_D23__GPIO_3_23 */
+				1262 0x80000000 /* MX6Q_PAD_SD3_DAT5__GPIO_7_0 */
+				1270 0x1f0b0	/* MX6Q_PAD_SD3_DAT4__GPIO_7_1 */
+				953  0x80000000	/* MX6Q_PAD_GPIO_0__CCM_CLKO */
+			>;
+		};
+	};
+};
+
+&usbotg {
+	vbus-supply = <&reg_usb_otg_vbus>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usbotg_1>;
+	disable-over-current;
+	status = "okay";
+};
+
+&usbh1 {
+	status = "okay";
+};
+
+&fec {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_enet_1>;
+	phy-mode = "rgmii";
+	phy-reset-gpios = <&gpio3 23 0>;
+	status = "okay";
+};
+
+&usdhc3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc3_2>;
+	cd-gpios = <&gpio7 0 0>;
+	wp-gpios = <&gpio7 1 0>;
+	vmmc-supply = <&reg_3p3v>;
+	status = "okay";
+};
+
+&usdhc4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc4_2>;
+	cd-gpios = <&gpio2 6 0>;
+	wp-gpios = <&gpio2 7 0>;
+	vmmc-supply = <&reg_3p3v>;
+	status = "okay";
+};
+
+&audmux {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_audmux_1>;
+};
+
+&uart2 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2_1>;
+};
+
+&i2c1 {
+	status = "okay";
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c1_1>;
+
+	codec: sgtl5000@0a {
+		compatible = "fsl,sgtl5000";
+		reg = <0x0a>;
+		clocks = <&clks 169>;
+		VDDA-supply = <&reg_2p5v>;
+		VDDIO-supply = <&reg_3p3v>;
+	};
+};

arch/arm/boot/dts/imx6q-sabresd.dts

@@ -21,61 +21,6 @@
 		reg = <0x10000000 0x40000000>;
 	};
 
-	soc {
-		aips-bus@02000000 { /* AIPS1 */
-			spba-bus@02000000 {
-				uart1: serial@02020000 {
-					pinctrl-names = "default";
-					pinctrl-0 = <&pinctrl_uart1_1>;
-					status = "okay";
-				};
-			};
-
-			iomuxc@020e0000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&pinctrl_hog>;
-
-				hog {
-					pinctrl_hog: hoggrp {
-						fsl,pins = <
-							1004 0x80000000 /* MX6Q_PAD_GPIO_4__GPIO_1_4 */
-							1012 0x80000000 /* MX6Q_PAD_GPIO_5__GPIO_1_5 */
-							1402 0x80000000	/* MX6Q_PAD_NANDF_D0__GPIO_2_0 */
-							1410 0x80000000	/* MX6Q_PAD_NANDF_D1__GPIO_2_1 */
-							1418 0x80000000	/* MX6Q_PAD_NANDF_D2__GPIO_2_2 */
-							1426 0x80000000	/* MX6Q_PAD_NANDF_D3__GPIO_2_3 */
-						>;
-					};
-				};
-			};
-		};
-
-		aips-bus@02100000 { /* AIPS2 */
-			ethernet@02188000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&pinctrl_enet_1>;
-				phy-mode = "rgmii";
-				status = "okay";
-			};
-
-			usdhc@02194000 { /* uSDHC2 */
-				pinctrl-names = "default";
-				pinctrl-0 = <&pinctrl_usdhc2_1>;
-				cd-gpios = <&gpio2 2 0>;
-				wp-gpios = <&gpio2 3 0>;
-				status = "okay";
-			};
-
-			usdhc@02198000 { /* uSDHC3 */
-				pinctrl-names = "default";
-				pinctrl-0 = <&pinctrl_usdhc3_1>;
-				cd-gpios = <&gpio2 0 0>;
-				wp-gpios = <&gpio2 1 0>;
-				status = "okay";
-			};
-		};
-	};
-
 	gpio-keys {
 		compatible = "gpio-keys";
 
@@ -92,3 +37,50 @@
 		};
 	};
 };
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1_1>;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_hog>;
+
+	hog {
+		pinctrl_hog: hoggrp {
+			fsl,pins = <
+				1004 0x80000000 /* MX6Q_PAD_GPIO_4__GPIO_1_4 */
+				1012 0x80000000 /* MX6Q_PAD_GPIO_5__GPIO_1_5 */
+				1402 0x80000000	/* MX6Q_PAD_NANDF_D0__GPIO_2_0 */
+				1410 0x80000000	/* MX6Q_PAD_NANDF_D1__GPIO_2_1 */
+				1418 0x80000000	/* MX6Q_PAD_NANDF_D2__GPIO_2_2 */
+				1426 0x80000000	/* MX6Q_PAD_NANDF_D3__GPIO_2_3 */
+			>;
+		};
+	};
+};
+
+&fec {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_enet_1>;
+	phy-mode = "rgmii";
+	status = "okay";
+};
+
+&usdhc2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc2_1>;
+	cd-gpios = <&gpio2 2 0>;
+	wp-gpios = <&gpio2 3 0>;
+	status = "okay";
+};
+
+&usdhc3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc3_1>;
+	cd-gpios = <&gpio2 0 0>;
+	wp-gpios = <&gpio2 1 0>;
+	status = "okay";
+};

arch/arm/boot/dts/imx6q.dtsi

@@ -1,33 +1,16 @@
+
 /*
- * Copyright 2011 Freescale Semiconductor, Inc.
- * Copyright 2011 Linaro Ltd.
+ * Copyright 2013 Freescale Semiconductor, Inc.
  *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
  *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
  */
 
-/include/ "skeleton.dtsi"
+/include/ "imx6qdl.dtsi"
 
 / {
-	aliases {
-		serial0 = &uart1;
-		serial1 = &uart2;
-		serial2 = &uart3;
-		serial3 = &uart4;
-		serial4 = &uart5;
-		gpio0 = &gpio1;
-		gpio1 = &gpio2;
-		gpio2 = &gpio3;
-		gpio3 = &gpio4;
-		gpio4 = &gpio5;
-		gpio5 = &gpio6;
-		gpio6 = &gpio7;
-	};
-
 	cpus {
 		#address-cells = <1>;
 		#size-cells = <0>;
@@ -38,12 +21,19 @@
 			next-level-cache = <&L2>;
 			operating-points = <
 				/* kHz    uV */
-				792000  1100000
+				1200000 1275000
+				996000  1250000
+				792000  1150000
 				396000  950000
-				198000  850000
 			>;
 			clock-latency = <61036>; /* two CLK32 periods */
-			cpu0-supply = <&reg_cpu>;
+			clocks = <&clks 104>, <&clks 6>, <&clks 16>,
+				 <&clks 17>, <&clks 170>;
+			clock-names = "arm", "pll2_pfd2_396m", "step",
+				      "pll1_sw", "pll1_sys";
+			arm-supply = <&reg_arm>;
+			pu-supply = <&reg_pu>;
+			soc-supply = <&reg_soc>;
 		};
 
 		cpu@1 {
@@ -65,142 +55,9 @@
 		};
 	};
 
-	intc: interrupt-controller@00a01000 {
-		compatible = "arm,cortex-a9-gic";
-		#interrupt-cells = <3>;
-		#address-cells = <1>;
-		#size-cells = <1>;
-		interrupt-controller;
-		reg = <0x00a01000 0x1000>,
-		      <0x00a00100 0x100>;
-	};
-
-	clocks {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		ckil {
-			compatible = "fsl,imx-ckil", "fixed-clock";
-			clock-frequency = <32768>;
-		};
-
-		ckih1 {
-			compatible = "fsl,imx-ckih1", "fixed-clock";
-			clock-frequency = <0>;
-		};
-
-		osc {
-			compatible = "fsl,imx-osc", "fixed-clock";
-			clock-frequency = <24000000>;
-		};
-	};
-
 	soc {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		compatible = "simple-bus";
-		interrupt-parent = <&intc>;
-		ranges;
-
-		dma-apbh@00110000 {
-			compatible = "fsl,imx6q-dma-apbh", "fsl,imx28-dma-apbh";
-			reg = <0x00110000 0x2000>;
-			clocks = <&clks 106>;
-		};
-
-		nfc: gpmi-nand@00112000 {
-			compatible = "fsl,imx6q-gpmi-nand";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			reg = <0x00112000 0x2000>, <0x00114000 0x2000>;
-			reg-names = "gpmi-nand", "bch";
-			interrupts = <0 13 0x04>, <0 15 0x04>;
-			interrupt-names = "gpmi-dma", "bch";
-			clocks = <&clks 152>, <&clks 153>, <&clks 151>,
-				 <&clks 150>, <&clks 149>;
-			clock-names = "gpmi_io", "gpmi_apb", "gpmi_bch",
-				      "gpmi_bch_apb", "per1_bch";
-			fsl,gpmi-dma-channel = <0>;
-			status = "disabled";
-		};
-
-		timer@00a00600 {
-			compatible = "arm,cortex-a9-twd-timer";
-			reg = <0x00a00600 0x20>;
-			interrupts = <1 13 0xf01>;
-		};
-
-		L2: l2-cache@00a02000 {
-			compatible = "arm,pl310-cache";
-			reg = <0x00a02000 0x1000>;
-			interrupts = <0 92 0x04>;
-			cache-unified;
-			cache-level = <2>;
-		};
-
 		aips-bus@02000000 { /* AIPS1 */
-			compatible = "fsl,aips-bus", "simple-bus";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			reg = <0x02000000 0x100000>;
-			ranges;
-
 			spba-bus@02000000 {
-				compatible = "fsl,spba-bus", "simple-bus";
-				#address-cells = <1>;
-				#size-cells = <1>;
-				reg = <0x02000000 0x40000>;
-				ranges;
-
-				spdif: spdif@02004000 {
-					reg = <0x02004000 0x4000>;
-					interrupts = <0 52 0x04>;
-				};
-
-				ecspi1: ecspi@02008000 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					compatible = "fsl,imx6q-ecspi", "fsl,imx51-ecspi";
-					reg = <0x02008000 0x4000>;
-					interrupts = <0 31 0x04>;
-					clocks = <&clks 112>, <&clks 112>;
-					clock-names = "ipg", "per";
-					status = "disabled";
-				};
-
-				ecspi2: ecspi@0200c000 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					compatible = "fsl,imx6q-ecspi", "fsl,imx51-ecspi";
-					reg = <0x0200c000 0x4000>;
-					interrupts = <0 32 0x04>;
-					clocks = <&clks 113>, <&clks 113>;
-					clock-names = "ipg", "per";
-					status = "disabled";
-				};
-
-				ecspi3: ecspi@02010000 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					compatible = "fsl,imx6q-ecspi", "fsl,imx51-ecspi";
-					reg = <0x02010000 0x4000>;
-					interrupts = <0 33 0x04>;
-					clocks = <&clks 114>, <&clks 114>;
-					clock-names = "ipg", "per";
-					status = "disabled";
-				};
-
-				ecspi4: ecspi@02014000 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					compatible = "fsl,imx6q-ecspi", "fsl,imx51-ecspi";
-					reg = <0x02014000 0x4000>;
-					interrupts = <0 34 0x04>;
-					clocks = <&clks 115>, <&clks 115>;
-					clock-names = "ipg", "per";
-					status = "disabled";
-				};
-
 				ecspi5: ecspi@02018000 {
 					#address-cells = <1>;
 					#size-cells = <0>;
@@ -211,361 +68,6 @@
 					clock-names = "ipg", "per";
 					status = "disabled";
 				};
-
-				uart1: serial@02020000 {
-					compatible = "fsl,imx6q-uart", "fsl,imx21-uart";
-					reg = <0x02020000 0x4000>;
-					interrupts = <0 26 0x04>;
-					clocks = <&clks 160>, <&clks 161>;
-					clock-names = "ipg", "per";
-					status = "disabled";
-				};
-
-				esai: esai@02024000 {
-					reg = <0x02024000 0x4000>;
-					interrupts = <0 51 0x04>;
-				};
-
-				ssi1: ssi@02028000 {
-					compatible = "fsl,imx6q-ssi","fsl,imx21-ssi";
-					reg = <0x02028000 0x4000>;
-					interrupts = <0 46 0x04>;
-					clocks = <&clks 178>;
-					fsl,fifo-depth = <15>;
-					fsl,ssi-dma-events = <38 37>;
-					status = "disabled";
-				};
-
-				ssi2: ssi@0202c000 {
-					compatible = "fsl,imx6q-ssi","fsl,imx21-ssi";
-					reg = <0x0202c000 0x4000>;
-					interrupts = <0 47 0x04>;
-					clocks = <&clks 179>;
-					fsl,fifo-depth = <15>;
-					fsl,ssi-dma-events = <42 41>;
-					status = "disabled";
-				};
-
-				ssi3: ssi@02030000 {
-					compatible = "fsl,imx6q-ssi","fsl,imx21-ssi";
-					reg = <0x02030000 0x4000>;
-					interrupts = <0 48 0x04>;
-					clocks = <&clks 180>;
-					fsl,fifo-depth = <15>;
-					fsl,ssi-dma-events = <46 45>;
-					status = "disabled";
-				};
-
-				asrc: asrc@02034000 {
-					reg = <0x02034000 0x4000>;
-					interrupts = <0 50 0x04>;
-				};
-
-				spba@0203c000 {
-					reg = <0x0203c000 0x4000>;
-				};
-			};
-
-			vpu: vpu@02040000 {
-				reg = <0x02040000 0x3c000>;
-				interrupts = <0 3 0x04 0 12 0x04>;
-			};
-
-			aipstz@0207c000 { /* AIPSTZ1 */
-				reg = <0x0207c000 0x4000>;
-			};
-
-			pwm1: pwm@02080000 {
-				#pwm-cells = <2>;
-				compatible = "fsl,imx6q-pwm", "fsl,imx27-pwm";
-				reg = <0x02080000 0x4000>;
-				interrupts = <0 83 0x04>;
-				clocks = <&clks 62>, <&clks 145>;
-				clock-names = "ipg", "per";
-			};
-
-			pwm2: pwm@02084000 {
-				#pwm-cells = <2>;
-				compatible = "fsl,imx6q-pwm", "fsl,imx27-pwm";
-				reg = <0x02084000 0x4000>;
-				interrupts = <0 84 0x04>;
-				clocks = <&clks 62>, <&clks 146>;
-				clock-names = "ipg", "per";
-			};
-
-			pwm3: pwm@02088000 {
-				#pwm-cells = <2>;
-				compatible = "fsl,imx6q-pwm", "fsl,imx27-pwm";
-				reg = <0x02088000 0x4000>;
-				interrupts = <0 85 0x04>;
-				clocks = <&clks 62>, <&clks 147>;
-				clock-names = "ipg", "per";
-			};
-
-			pwm4: pwm@0208c000 {
-				#pwm-cells = <2>;
-				compatible = "fsl,imx6q-pwm", "fsl,imx27-pwm";
-				reg = <0x0208c000 0x4000>;
-				interrupts = <0 86 0x04>;
-				clocks = <&clks 62>, <&clks 148>;
-				clock-names = "ipg", "per";
-			};
-
-			can1: flexcan@02090000 {
-				reg = <0x02090000 0x4000>;
-				interrupts = <0 110 0x04>;
-			};
-
-			can2: flexcan@02094000 {
-				reg = <0x02094000 0x4000>;
-				interrupts = <0 111 0x04>;
-			};
-
-			gpt: gpt@02098000 {
-				compatible = "fsl,imx6q-gpt";
-				reg = <0x02098000 0x4000>;
-				interrupts = <0 55 0x04>;
-			};
-
-			gpio1: gpio@0209c000 {
-				compatible = "fsl,imx6q-gpio", "fsl,imx35-gpio";
-				reg = <0x0209c000 0x4000>;
-				interrupts = <0 66 0x04 0 67 0x04>;
-				gpio-controller;
-				#gpio-cells = <2>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-			};
-
-			gpio2: gpio@020a0000 {
-				compatible = "fsl,imx6q-gpio", "fsl,imx35-gpio";
-				reg = <0x020a0000 0x4000>;
-				interrupts = <0 68 0x04 0 69 0x04>;
-				gpio-controller;
-				#gpio-cells = <2>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-			};
-
-			gpio3: gpio@020a4000 {
-				compatible = "fsl,imx6q-gpio", "fsl,imx35-gpio";
-				reg = <0x020a4000 0x4000>;
-				interrupts = <0 70 0x04 0 71 0x04>;
-				gpio-controller;
-				#gpio-cells = <2>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-			};
-
-			gpio4: gpio@020a8000 {
-				compatible = "fsl,imx6q-gpio", "fsl,imx35-gpio";
-				reg = <0x020a8000 0x4000>;
-				interrupts = <0 72 0x04 0 73 0x04>;
-				gpio-controller;
-				#gpio-cells = <2>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-			};
-
-			gpio5: gpio@020ac000 {
-				compatible = "fsl,imx6q-gpio", "fsl,imx35-gpio";
-				reg = <0x020ac000 0x4000>;
-				interrupts = <0 74 0x04 0 75 0x04>;
-				gpio-controller;
-				#gpio-cells = <2>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-			};
-
-			gpio6: gpio@020b0000 {
-				compatible = "fsl,imx6q-gpio", "fsl,imx35-gpio";
-				reg = <0x020b0000 0x4000>;
-				interrupts = <0 76 0x04 0 77 0x04>;
-				gpio-controller;
-				#gpio-cells = <2>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-			};
-
-			gpio7: gpio@020b4000 {
-				compatible = "fsl,imx6q-gpio", "fsl,imx35-gpio";
-				reg = <0x020b4000 0x4000>;
-				interrupts = <0 78 0x04 0 79 0x04>;
-				gpio-controller;
-				#gpio-cells = <2>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-			};
-
-			kpp: kpp@020b8000 {
-				reg = <0x020b8000 0x4000>;
-				interrupts = <0 82 0x04>;
-			};
-
-			wdog1: wdog@020bc000 {
-				compatible = "fsl,imx6q-wdt", "fsl,imx21-wdt";
-				reg = <0x020bc000 0x4000>;
-				interrupts = <0 80 0x04>;
-				clocks = <&clks 0>;
-			};
-
-			wdog2: wdog@020c0000 {
-				compatible = "fsl,imx6q-wdt", "fsl,imx21-wdt";
-				reg = <0x020c0000 0x4000>;
-				interrupts = <0 81 0x04>;
-				clocks = <&clks 0>;
-				status = "disabled";
-			};
-
-			clks: ccm@020c4000 {
-				compatible = "fsl,imx6q-ccm";
-				reg = <0x020c4000 0x4000>;
-				interrupts = <0 87 0x04 0 88 0x04>;
-				#clock-cells = <1>;
-			};
-
-			anatop: anatop@020c8000 {
-				compatible = "fsl,imx6q-anatop", "syscon", "simple-bus";
-				reg = <0x020c8000 0x1000>;
-				interrupts = <0 49 0x04 0 54 0x04 0 127 0x04>;
-
-				regulator-1p1@110 {
-					compatible = "fsl,anatop-regulator";
-					regulator-name = "vdd1p1";
-					regulator-min-microvolt = <800000>;
-					regulator-max-microvolt = <1375000>;
-					regulator-always-on;
-					anatop-reg-offset = <0x110>;
-					anatop-vol-bit-shift = <8>;
-					anatop-vol-bit-width = <5>;
-					anatop-min-bit-val = <4>;
-					anatop-min-voltage = <800000>;
-					anatop-max-voltage = <1375000>;
-				};
-
-				regulator-3p0@120 {
-					compatible = "fsl,anatop-regulator";
-					regulator-name = "vdd3p0";
-					regulator-min-microvolt = <2800000>;
-					regulator-max-microvolt = <3150000>;
-					regulator-always-on;
-					anatop-reg-offset = <0x120>;
-					anatop-vol-bit-shift = <8>;
-					anatop-vol-bit-width = <5>;
-					anatop-min-bit-val = <0>;
-					anatop-min-voltage = <2625000>;
-					anatop-max-voltage = <3400000>;
-				};
-
-				regulator-2p5@130 {
-					compatible = "fsl,anatop-regulator";
-					regulator-name = "vdd2p5";
-					regulator-min-microvolt = <2000000>;
-					regulator-max-microvolt = <2750000>;
-					regulator-always-on;
-					anatop-reg-offset = <0x130>;
-					anatop-vol-bit-shift = <8>;
-					anatop-vol-bit-width = <5>;
-					anatop-min-bit-val = <0>;
-					anatop-min-voltage = <2000000>;
-					anatop-max-voltage = <2750000>;
-				};
-
-				reg_cpu: regulator-vddcore@140 {
-					compatible = "fsl,anatop-regulator";
-					regulator-name = "cpu";
-					regulator-min-microvolt = <725000>;
-					regulator-max-microvolt = <1450000>;
-					regulator-always-on;
-					anatop-reg-offset = <0x140>;
-					anatop-vol-bit-shift = <0>;
-					anatop-vol-bit-width = <5>;
-					anatop-min-bit-val = <1>;
-					anatop-min-voltage = <725000>;
-					anatop-max-voltage = <1450000>;
-				};
-
-				regulator-vddpu@140 {
-					compatible = "fsl,anatop-regulator";
-					regulator-name = "vddpu";
-					regulator-min-microvolt = <725000>;
-					regulator-max-microvolt = <1450000>;
-					regulator-always-on;
-					anatop-reg-offset = <0x140>;
-					anatop-vol-bit-shift = <9>;
-					anatop-vol-bit-width = <5>;
-					anatop-min-bit-val = <1>;
-					anatop-min-voltage = <725000>;
-					anatop-max-voltage = <1450000>;
-				};
-
-				regulator-vddsoc@140 {
-					compatible = "fsl,anatop-regulator";
-					regulator-name = "vddsoc";
-					regulator-min-microvolt = <725000>;
-					regulator-max-microvolt = <1450000>;
-					regulator-always-on;
-					anatop-reg-offset = <0x140>;
-					anatop-vol-bit-shift = <18>;
-					anatop-vol-bit-width = <5>;
-					anatop-min-bit-val = <1>;
-					anatop-min-voltage = <725000>;
-					anatop-max-voltage = <1450000>;
-				};
-			};
-
-			usbphy1: usbphy@020c9000 {
-				compatible = "fsl,imx6q-usbphy", "fsl,imx23-usbphy";
-				reg = <0x020c9000 0x1000>;
-				interrupts = <0 44 0x04>;
-				clocks = <&clks 182>;
-			};
-
-			usbphy2: usbphy@020ca000 {
-				compatible = "fsl,imx6q-usbphy", "fsl,imx23-usbphy";
-				reg = <0x020ca000 0x1000>;
-				interrupts = <0 45 0x04>;
-				clocks = <&clks 183>;
-			};
-
-			snvs@020cc000 {
-				compatible = "fsl,sec-v4.0-mon", "simple-bus";
-				#address-cells = <1>;
-				#size-cells = <1>;
-				ranges = <0 0x020cc000 0x4000>;
-
-				snvs-rtc-lp@34 {
-					compatible = "fsl,sec-v4.0-mon-rtc-lp";
-					reg = <0x34 0x58>;
-					interrupts = <0 19 0x04 0 20 0x04>;
-				};
-			};
-
-			epit1: epit@020d0000 { /* EPIT1 */
-				reg = <0x020d0000 0x4000>;
-				interrupts = <0 56 0x04>;
-			};
-
-			epit2: epit@020d4000 { /* EPIT2 */
-				reg = <0x020d4000 0x4000>;
-				interrupts = <0 57 0x04>;
-			};
-
-			src: src@020d8000 {
-				compatible = "fsl,imx6q-src";
-				reg = <0x020d8000 0x4000>;
-				interrupts = <0 91 0x04 0 96 0x04>;
-			};
-
-			gpc: gpc@020dc000 {
-				compatible = "fsl,imx6q-gpc";
-				reg = <0x020dc000 0x4000>;
-				interrupts = <0 89 0x04 0 90 0x04>;
-			};
-
-			gpr: iomuxc-gpr@020e0000 {
-				compatible = "fsl,imx6q-iomuxc-gpr", "syscon";
-				reg = <0x020e0000 0x38>;
 			};
 
 			iomuxc: iomuxc@020e0000 {
@@ -780,272 +282,6 @@
 					};
 				};
 			};
-
-			dcic1: dcic@020e4000 {
-				reg = <0x020e4000 0x4000>;
-				interrupts = <0 124 0x04>;
-			};
-
-			dcic2: dcic@020e8000 {
-				reg = <0x020e8000 0x4000>;
-				interrupts = <0 125 0x04>;
-			};
-
-			sdma: sdma@020ec000 {
-				compatible = "fsl,imx6q-sdma", "fsl,imx35-sdma";
-				reg = <0x020ec000 0x4000>;
-				interrupts = <0 2 0x04>;
-				clocks = <&clks 155>, <&clks 155>;
-				clock-names = "ipg", "ahb";
-				fsl,sdma-ram-script-name = "imx/sdma/sdma-imx6q-to1.bin";
-			};
-		};
-
-		aips-bus@02100000 { /* AIPS2 */
-			compatible = "fsl,aips-bus", "simple-bus";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			reg = <0x02100000 0x100000>;
-			ranges;
-
-			caam@02100000 {
-				reg = <0x02100000 0x40000>;
-				interrupts = <0 105 0x04 0 106 0x04>;
-			};
-
-			aipstz@0217c000 { /* AIPSTZ2 */
-				reg = <0x0217c000 0x4000>;
-			};
-
-			usbotg: usb@02184000 {
-				compatible = "fsl,imx6q-usb", "fsl,imx27-usb";
-				reg = <0x02184000 0x200>;
-				interrupts = <0 43 0x04>;
-				clocks = <&clks 162>;
-				fsl,usbphy = <&usbphy1>;
-				fsl,usbmisc = <&usbmisc 0>;
-				status = "disabled";
-			};
-
-			usbh1: usb@02184200 {
-				compatible = "fsl,imx6q-usb", "fsl,imx27-usb";
-				reg = <0x02184200 0x200>;
-				interrupts = <0 40 0x04>;
-				clocks = <&clks 162>;
-				fsl,usbphy = <&usbphy2>;
-				fsl,usbmisc = <&usbmisc 1>;
-				status = "disabled";
-			};
-
-			usbh2: usb@02184400 {
-				compatible = "fsl,imx6q-usb", "fsl,imx27-usb";
-				reg = <0x02184400 0x200>;
-				interrupts = <0 41 0x04>;
-				clocks = <&clks 162>;
-				fsl,usbmisc = <&usbmisc 2>;
-				status = "disabled";
-			};
-
-			usbh3: usb@02184600 {
-				compatible = "fsl,imx6q-usb", "fsl,imx27-usb";
-				reg = <0x02184600 0x200>;
-				interrupts = <0 42 0x04>;
-				clocks = <&clks 162>;
-				fsl,usbmisc = <&usbmisc 3>;
-				status = "disabled";
-			};
-
-			usbmisc: usbmisc: usbmisc@02184800 {
-				#index-cells = <1>;
-				compatible = "fsl,imx6q-usbmisc";
-				reg = <0x02184800 0x200>;
-				clocks = <&clks 162>;
-			};
-
-			fec: ethernet@02188000 {
-				compatible = "fsl,imx6q-fec";
-				reg = <0x02188000 0x4000>;
-				interrupts = <0 118 0x04 0 119 0x04>;
-				clocks = <&clks 117>, <&clks 117>, <&clks 177>;
-				clock-names = "ipg", "ahb", "ptp";
-				status = "disabled";
-			};
-
-			mlb@0218c000 {
-				reg = <0x0218c000 0x4000>;
-				interrupts = <0 53 0x04 0 117 0x04 0 126 0x04>;
-			};
-
-			usdhc1: usdhc@02190000 {
-				compatible = "fsl,imx6q-usdhc";
-				reg = <0x02190000 0x4000>;
-				interrupts = <0 22 0x04>;
-				clocks = <&clks 163>, <&clks 163>, <&clks 163>;
-				clock-names = "ipg", "ahb", "per";
-				bus-width = <4>;
-				status = "disabled";
-			};
-
-			usdhc2: usdhc@02194000 {
-				compatible = "fsl,imx6q-usdhc";
-				reg = <0x02194000 0x4000>;
-				interrupts = <0 23 0x04>;
-				clocks = <&clks 164>, <&clks 164>, <&clks 164>;
-				clock-names = "ipg", "ahb", "per";
-				bus-width = <4>;
-				status = "disabled";
-			};
-
-			usdhc3: usdhc@02198000 {
-				compatible = "fsl,imx6q-usdhc";
-				reg = <0x02198000 0x4000>;
-				interrupts = <0 24 0x04>;
-				clocks = <&clks 165>, <&clks 165>, <&clks 165>;
-				clock-names = "ipg", "ahb", "per";
-				bus-width = <4>;
-				status = "disabled";
-			};
-
-			usdhc4: usdhc@0219c000 {
-				compatible = "fsl,imx6q-usdhc";
-				reg = <0x0219c000 0x4000>;
-				interrupts = <0 25 0x04>;
-				clocks = <&clks 166>, <&clks 166>, <&clks 166>;
-				clock-names = "ipg", "ahb", "per";
-				bus-width = <4>;
-				status = "disabled";
-			};
-
-			i2c1: i2c@021a0000 {
-				#address-cells = <1>;
-				#size-cells = <0>;
-				compatible = "fsl,imx6q-i2c", "fsl,imx21-i2c";
-				reg = <0x021a0000 0x4000>;
-				interrupts = <0 36 0x04>;
-				clocks = <&clks 125>;
-				status = "disabled";
-			};
-
-			i2c2: i2c@021a4000 {
-				#address-cells = <1>;
-				#size-cells = <0>;
-				compatible = "fsl,imx6q-i2c", "fsl,imx21-i2c";
-				reg = <0x021a4000 0x4000>;
-				interrupts = <0 37 0x04>;
-				clocks = <&clks 126>;
-				status = "disabled";
-			};
-
-			i2c3: i2c@021a8000 {
-				#address-cells = <1>;
-				#size-cells = <0>;
-				compatible = "fsl,imx6q-i2c", "fsl,imx21-i2c";
-				reg = <0x021a8000 0x4000>;
-				interrupts = <0 38 0x04>;
-				clocks = <&clks 127>;
-				status = "disabled";
-			};
-
-			romcp@021ac000 {
-				reg = <0x021ac000 0x4000>;
-			};
-
-			mmdc0: mmdc@021b0000 { /* MMDC0 */
-				compatible = "fsl,imx6q-mmdc";
-				reg = <0x021b0000 0x4000>;
-			};
-
-			mmdc1: mmdc@021b4000 { /* MMDC1 */
-				reg = <0x021b4000 0x4000>;
-			};
-
-			weim@021b8000 {
-				reg = <0x021b8000 0x4000>;
-				interrupts = <0 14 0x04>;
-			};
-
-			ocotp@021bc000 {
-				reg = <0x021bc000 0x4000>;
-			};
-
-			ocotp@021c0000 {
-				reg = <0x021c0000 0x4000>;
-				interrupts = <0 21 0x04>;
-			};
-
-			tzasc@021d0000 { /* TZASC1 */
-				reg = <0x021d0000 0x4000>;
-				interrupts = <0 108 0x04>;
-			};
-
-			tzasc@021d4000 { /* TZASC2 */
-				reg = <0x021d4000 0x4000>;
-				interrupts = <0 109 0x04>;
-			};
-
-			audmux: audmux@021d8000 {
-				compatible = "fsl,imx6q-audmux", "fsl,imx31-audmux";
-				reg = <0x021d8000 0x4000>;
-				status = "disabled";
-			};
-
-			mipi@021dc000 { /* MIPI-CSI */
-				reg = <0x021dc000 0x4000>;
-			};
-
-			mipi@021e0000 { /* MIPI-DSI */
-				reg = <0x021e0000 0x4000>;
-			};
-
-			vdoa@021e4000 {
-				reg = <0x021e4000 0x4000>;
-				interrupts = <0 18 0x04>;
-			};
-
-			uart2: serial@021e8000 {
-				compatible = "fsl,imx6q-uart", "fsl,imx21-uart";
-				reg = <0x021e8000 0x4000>;
-				interrupts = <0 27 0x04>;
-				clocks = <&clks 160>, <&clks 161>;
-				clock-names = "ipg", "per";
-				status = "disabled";
-			};
-
-			uart3: serial@021ec000 {
-				compatible = "fsl,imx6q-uart", "fsl,imx21-uart";
-				reg = <0x021ec000 0x4000>;
-				interrupts = <0 28 0x04>;
-				clocks = <&clks 160>, <&clks 161>;
-				clock-names = "ipg", "per";
-				status = "disabled";
-			};
-
-			uart4: serial@021f0000 {
-				compatible = "fsl,imx6q-uart", "fsl,imx21-uart";
-				reg = <0x021f0000 0x4000>;
-				interrupts = <0 29 0x04>;
-				clocks = <&clks 160>, <&clks 161>;
-				clock-names = "ipg", "per";
-				status = "disabled";
-			};
-
-			uart5: serial@021f4000 {
-				compatible = "fsl,imx6q-uart", "fsl,imx21-uart";
-				reg = <0x021f4000 0x4000>;
-				interrupts = <0 30 0x04>;
-				clocks = <&clks 160>, <&clks 161>;
-				clock-names = "ipg", "per";
-				status = "disabled";
-			};
-		};
-
-		ipu1: ipu@02400000 {
-			#crtc-cells = <1>;
-			compatible = "fsl,imx6q-ipu";
-			reg = <0x02400000 0x400000>;
-			interrupts = <0 6 0x4 0 5 0x4>;
-			clocks = <&clks 130>, <&clks 131>, <&clks 132>;
-			clock-names = "bus", "di0", "di1";
 		};
 
 		ipu2: ipu@02800000 {

arch/arm/boot/dts/imx6qdl.dtsi

@@ -0,0 +1,800 @@
+/*
+ * Copyright 2011 Freescale Semiconductor, Inc.
+ * Copyright 2011 Linaro Ltd.
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+/include/ "skeleton.dtsi"
+
+/ {
+	aliases {
+		serial0 = &uart1;
+		serial1 = &uart2;
+		serial2 = &uart3;
+		serial3 = &uart4;
+		serial4 = &uart5;
+		gpio0 = &gpio1;
+		gpio1 = &gpio2;
+		gpio2 = &gpio3;
+		gpio3 = &gpio4;
+		gpio4 = &gpio5;
+		gpio5 = &gpio6;
+		gpio6 = &gpio7;
+	};
+
+	intc: interrupt-controller@00a01000 {
+		compatible = "arm,cortex-a9-gic";
+		#interrupt-cells = <3>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		interrupt-controller;
+		reg = <0x00a01000 0x1000>,
+		      <0x00a00100 0x100>;
+	};
+
+	clocks {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ckil {
+			compatible = "fsl,imx-ckil", "fixed-clock";
+			clock-frequency = <32768>;
+		};
+
+		ckih1 {
+			compatible = "fsl,imx-ckih1", "fixed-clock";
+			clock-frequency = <0>;
+		};
+
+		osc {
+			compatible = "fsl,imx-osc", "fixed-clock";
+			clock-frequency = <24000000>;
+		};
+	};
+
+	soc {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "simple-bus";
+		interrupt-parent = <&intc>;
+		ranges;
+
+		dma-apbh@00110000 {
+			compatible = "fsl,imx6q-dma-apbh", "fsl,imx28-dma-apbh";
+			reg = <0x00110000 0x2000>;
+			clocks = <&clks 106>;
+		};
+
+		gpmi: gpmi-nand@00112000 {
+			compatible = "fsl,imx6q-gpmi-nand";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			reg = <0x00112000 0x2000>, <0x00114000 0x2000>;
+			reg-names = "gpmi-nand", "bch";
+			interrupts = <0 13 0x04>, <0 15 0x04>;
+			interrupt-names = "gpmi-dma", "bch";
+			clocks = <&clks 152>, <&clks 153>, <&clks 151>,
+				 <&clks 150>, <&clks 149>;
+			clock-names = "gpmi_io", "gpmi_apb", "gpmi_bch",
+				      "gpmi_bch_apb", "per1_bch";
+			fsl,gpmi-dma-channel = <0>;
+			status = "disabled";
+		};
+
+		timer@00a00600 {
+			compatible = "arm,cortex-a9-twd-timer";
+			reg = <0x00a00600 0x20>;
+			interrupts = <1 13 0xf01>;
+		};
+
+		L2: l2-cache@00a02000 {
+			compatible = "arm,pl310-cache";
+			reg = <0x00a02000 0x1000>;
+			interrupts = <0 92 0x04>;
+			cache-unified;
+			cache-level = <2>;
+		};
+
+		aips-bus@02000000 { /* AIPS1 */
+			compatible = "fsl,aips-bus", "simple-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			reg = <0x02000000 0x100000>;
+			ranges;
+
+			spba-bus@02000000 {
+				compatible = "fsl,spba-bus", "simple-bus";
+				#address-cells = <1>;
+				#size-cells = <1>;
+				reg = <0x02000000 0x40000>;
+				ranges;
+
+				spdif: spdif@02004000 {
+					reg = <0x02004000 0x4000>;
+					interrupts = <0 52 0x04>;
+				};
+
+				ecspi1: ecspi@02008000 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					compatible = "fsl,imx6q-ecspi", "fsl,imx51-ecspi";
+					reg = <0x02008000 0x4000>;
+					interrupts = <0 31 0x04>;
+					clocks = <&clks 112>, <&clks 112>;
+					clock-names = "ipg", "per";
+					status = "disabled";
+				};
+
+				ecspi2: ecspi@0200c000 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					compatible = "fsl,imx6q-ecspi", "fsl,imx51-ecspi";
+					reg = <0x0200c000 0x4000>;
+					interrupts = <0 32 0x04>;
+					clocks = <&clks 113>, <&clks 113>;
+					clock-names = "ipg", "per";
+					status = "disabled";
+				};
+
+				ecspi3: ecspi@02010000 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					compatible = "fsl,imx6q-ecspi", "fsl,imx51-ecspi";
+					reg = <0x02010000 0x4000>;
+					interrupts = <0 33 0x04>;
+					clocks = <&clks 114>, <&clks 114>;
+					clock-names = "ipg", "per";
+					status = "disabled";
+				};
+
+				ecspi4: ecspi@02014000 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					compatible = "fsl,imx6q-ecspi", "fsl,imx51-ecspi";
+					reg = <0x02014000 0x4000>;
+					interrupts = <0 34 0x04>;
+					clocks = <&clks 115>, <&clks 115>;
+					clock-names = "ipg", "per";
+					status = "disabled";
+				};
+
+				uart1: serial@02020000 {
+					compatible = "fsl,imx6q-uart", "fsl,imx21-uart";
+					reg = <0x02020000 0x4000>;
+					interrupts = <0 26 0x04>;
+					clocks = <&clks 160>, <&clks 161>;
+					clock-names = "ipg", "per";
+					status = "disabled";
+				};
+
+				esai: esai@02024000 {
+					reg = <0x02024000 0x4000>;
+					interrupts = <0 51 0x04>;
+				};
+
+				ssi1: ssi@02028000 {
+					compatible = "fsl,imx6q-ssi","fsl,imx21-ssi";
+					reg = <0x02028000 0x4000>;
+					interrupts = <0 46 0x04>;
+					clocks = <&clks 178>;
+					fsl,fifo-depth = <15>;
+					fsl,ssi-dma-events = <38 37>;
+					status = "disabled";
+				};
+
+				ssi2: ssi@0202c000 {
+					compatible = "fsl,imx6q-ssi","fsl,imx21-ssi";
+					reg = <0x0202c000 0x4000>;
+					interrupts = <0 47 0x04>;
+					clocks = <&clks 179>;
+					fsl,fifo-depth = <15>;
+					fsl,ssi-dma-events = <42 41>;
+					status = "disabled";
+				};
+
+				ssi3: ssi@02030000 {
+					compatible = "fsl,imx6q-ssi","fsl,imx21-ssi";
+					reg = <0x02030000 0x4000>;
+					interrupts = <0 48 0x04>;
+					clocks = <&clks 180>;
+					fsl,fifo-depth = <15>;
+					fsl,ssi-dma-events = <46 45>;
+					status = "disabled";
+				};
+
+				asrc: asrc@02034000 {
+					reg = <0x02034000 0x4000>;
+					interrupts = <0 50 0x04>;
+				};
+
+				spba@0203c000 {
+					reg = <0x0203c000 0x4000>;
+				};
+			};
+
+			vpu: vpu@02040000 {
+				reg = <0x02040000 0x3c000>;
+				interrupts = <0 3 0x04 0 12 0x04>;
+			};
+
+			aipstz@0207c000 { /* AIPSTZ1 */
+				reg = <0x0207c000 0x4000>;
+			};
+
+			pwm1: pwm@02080000 {
+				#pwm-cells = <2>;
+				compatible = "fsl,imx6q-pwm", "fsl,imx27-pwm";
+				reg = <0x02080000 0x4000>;
+				interrupts = <0 83 0x04>;
+				clocks = <&clks 62>, <&clks 145>;
+				clock-names = "ipg", "per";
+			};
+
+			pwm2: pwm@02084000 {
+				#pwm-cells = <2>;
+				compatible = "fsl,imx6q-pwm", "fsl,imx27-pwm";
+				reg = <0x02084000 0x4000>;
+				interrupts = <0 84 0x04>;
+				clocks = <&clks 62>, <&clks 146>;
+				clock-names = "ipg", "per";
+			};
+
+			pwm3: pwm@02088000 {
+				#pwm-cells = <2>;
+				compatible = "fsl,imx6q-pwm", "fsl,imx27-pwm";
+				reg = <0x02088000 0x4000>;
+				interrupts = <0 85 0x04>;
+				clocks = <&clks 62>, <&clks 147>;
+				clock-names = "ipg", "per";
+			};
+
+			pwm4: pwm@0208c000 {
+				#pwm-cells = <2>;
+				compatible = "fsl,imx6q-pwm", "fsl,imx27-pwm";
+				reg = <0x0208c000 0x4000>;
+				interrupts = <0 86 0x04>;
+				clocks = <&clks 62>, <&clks 148>;
+				clock-names = "ipg", "per";
+			};
+
+			can1: flexcan@02090000 {
+				reg = <0x02090000 0x4000>;
+				interrupts = <0 110 0x04>;
+			};
+
+			can2: flexcan@02094000 {
+				reg = <0x02094000 0x4000>;
+				interrupts = <0 111 0x04>;
+			};
+
+			gpt: gpt@02098000 {
+				compatible = "fsl,imx6q-gpt";
+				reg = <0x02098000 0x4000>;
+				interrupts = <0 55 0x04>;
+			};
+
+			gpio1: gpio@0209c000 {
+				compatible = "fsl,imx6q-gpio", "fsl,imx35-gpio";
+				reg = <0x0209c000 0x4000>;
+				interrupts = <0 66 0x04 0 67 0x04>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+			};
+
+			gpio2: gpio@020a0000 {
+				compatible = "fsl,imx6q-gpio", "fsl,imx35-gpio";
+				reg = <0x020a0000 0x4000>;
+				interrupts = <0 68 0x04 0 69 0x04>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+			};
+
+			gpio3: gpio@020a4000 {
+				compatible = "fsl,imx6q-gpio", "fsl,imx35-gpio";
+				reg = <0x020a4000 0x4000>;
+				interrupts = <0 70 0x04 0 71 0x04>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+			};
+
+			gpio4: gpio@020a8000 {
+				compatible = "fsl,imx6q-gpio", "fsl,imx35-gpio";
+				reg = <0x020a8000 0x4000>;
+				interrupts = <0 72 0x04 0 73 0x04>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+			};
+
+			gpio5: gpio@020ac000 {
+				compatible = "fsl,imx6q-gpio", "fsl,imx35-gpio";
+				reg = <0x020ac000 0x4000>;
+				interrupts = <0 74 0x04 0 75 0x04>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+			};
+
+			gpio6: gpio@020b0000 {
+				compatible = "fsl,imx6q-gpio", "fsl,imx35-gpio";
+				reg = <0x020b0000 0x4000>;
+				interrupts = <0 76 0x04 0 77 0x04>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+			};
+
+			gpio7: gpio@020b4000 {
+				compatible = "fsl,imx6q-gpio", "fsl,imx35-gpio";
+				reg = <0x020b4000 0x4000>;
+				interrupts = <0 78 0x04 0 79 0x04>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+			};
+
+			kpp: kpp@020b8000 {
+				reg = <0x020b8000 0x4000>;
+				interrupts = <0 82 0x04>;
+			};
+
+			wdog1: wdog@020bc000 {
+				compatible = "fsl,imx6q-wdt", "fsl,imx21-wdt";
+				reg = <0x020bc000 0x4000>;
+				interrupts = <0 80 0x04>;
+				clocks = <&clks 0>;
+			};
+
+			wdog2: wdog@020c0000 {
+				compatible = "fsl,imx6q-wdt", "fsl,imx21-wdt";
+				reg = <0x020c0000 0x4000>;
+				interrupts = <0 81 0x04>;
+				clocks = <&clks 0>;
+				status = "disabled";
+			};
+
+			clks: ccm@020c4000 {
+				compatible = "fsl,imx6q-ccm";
+				reg = <0x020c4000 0x4000>;
+				interrupts = <0 87 0x04 0 88 0x04>;
+				#clock-cells = <1>;
+			};
+
+			anatop: anatop@020c8000 {
+				compatible = "fsl,imx6q-anatop", "syscon", "simple-bus";
+				reg = <0x020c8000 0x1000>;
+				interrupts = <0 49 0x04 0 54 0x04 0 127 0x04>;
+
+				regulator-1p1@110 {
+					compatible = "fsl,anatop-regulator";
+					regulator-name = "vdd1p1";
+					regulator-min-microvolt = <800000>;
+					regulator-max-microvolt = <1375000>;
+					regulator-always-on;
+					anatop-reg-offset = <0x110>;
+					anatop-vol-bit-shift = <8>;
+					anatop-vol-bit-width = <5>;
+					anatop-min-bit-val = <4>;
+					anatop-min-voltage = <800000>;
+					anatop-max-voltage = <1375000>;
+				};
+
+				regulator-3p0@120 {
+					compatible = "fsl,anatop-regulator";
+					regulator-name = "vdd3p0";
+					regulator-min-microvolt = <2800000>;
+					regulator-max-microvolt = <3150000>;
+					regulator-always-on;
+					anatop-reg-offset = <0x120>;
+					anatop-vol-bit-shift = <8>;
+					anatop-vol-bit-width = <5>;
+					anatop-min-bit-val = <0>;
+					anatop-min-voltage = <2625000>;
+					anatop-max-voltage = <3400000>;
+				};
+
+				regulator-2p5@130 {
+					compatible = "fsl,anatop-regulator";
+					regulator-name = "vdd2p5";
+					regulator-min-microvolt = <2000000>;
+					regulator-max-microvolt = <2750000>;
+					regulator-always-on;
+					anatop-reg-offset = <0x130>;
+					anatop-vol-bit-shift = <8>;
+					anatop-vol-bit-width = <5>;
+					anatop-min-bit-val = <0>;
+					anatop-min-voltage = <2000000>;
+					anatop-max-voltage = <2750000>;
+				};
+
+				reg_arm: regulator-vddcore@140 {
+					compatible = "fsl,anatop-regulator";
+					regulator-name = "cpu";
+					regulator-min-microvolt = <725000>;
+					regulator-max-microvolt = <1450000>;
+					regulator-always-on;
+					anatop-reg-offset = <0x140>;
+					anatop-vol-bit-shift = <0>;
+					anatop-vol-bit-width = <5>;
+					anatop-delay-reg-offset = <0x170>;
+					anatop-delay-bit-shift = <24>;
+					anatop-delay-bit-width = <2>;
+					anatop-min-bit-val = <1>;
+					anatop-min-voltage = <725000>;
+					anatop-max-voltage = <1450000>;
+				};
+
+				reg_pu: regulator-vddpu@140 {
+					compatible = "fsl,anatop-regulator";
+					regulator-name = "vddpu";
+					regulator-min-microvolt = <725000>;
+					regulator-max-microvolt = <1450000>;
+					regulator-always-on;
+					anatop-reg-offset = <0x140>;
+					anatop-vol-bit-shift = <9>;
+					anatop-vol-bit-width = <5>;
+					anatop-delay-reg-offset = <0x170>;
+					anatop-delay-bit-shift = <26>;
+					anatop-delay-bit-width = <2>;
+					anatop-min-bit-val = <1>;
+					anatop-min-voltage = <725000>;
+					anatop-max-voltage = <1450000>;
+				};
+
+				reg_soc: regulator-vddsoc@140 {
+					compatible = "fsl,anatop-regulator";
+					regulator-name = "vddsoc";
+					regulator-min-microvolt = <725000>;
+					regulator-max-microvolt = <1450000>;
+					regulator-always-on;
+					anatop-reg-offset = <0x140>;
+					anatop-vol-bit-shift = <18>;
+					anatop-vol-bit-width = <5>;
+					anatop-delay-reg-offset = <0x170>;
+					anatop-delay-bit-shift = <28>;
+					anatop-delay-bit-width = <2>;
+					anatop-min-bit-val = <1>;
+					anatop-min-voltage = <725000>;
+					anatop-max-voltage = <1450000>;
+				};
+			};
+
+			usbphy1: usbphy@020c9000 {
+				compatible = "fsl,imx6q-usbphy", "fsl,imx23-usbphy";
+				reg = <0x020c9000 0x1000>;
+				interrupts = <0 44 0x04>;
+				clocks = <&clks 182>;
+			};
+
+			usbphy2: usbphy@020ca000 {
+				compatible = "fsl,imx6q-usbphy", "fsl,imx23-usbphy";
+				reg = <0x020ca000 0x1000>;
+				interrupts = <0 45 0x04>;
+				clocks = <&clks 183>;
+			};
+
+			snvs@020cc000 {
+				compatible = "fsl,sec-v4.0-mon", "simple-bus";
+				#address-cells = <1>;
+				#size-cells = <1>;
+				ranges = <0 0x020cc000 0x4000>;
+
+				snvs-rtc-lp@34 {
+					compatible = "fsl,sec-v4.0-mon-rtc-lp";
+					reg = <0x34 0x58>;
+					interrupts = <0 19 0x04 0 20 0x04>;
+				};
+			};
+
+			epit1: epit@020d0000 { /* EPIT1 */
+				reg = <0x020d0000 0x4000>;
+				interrupts = <0 56 0x04>;
+			};
+
+			epit2: epit@020d4000 { /* EPIT2 */
+				reg = <0x020d4000 0x4000>;
+				interrupts = <0 57 0x04>;
+			};
+
+			src: src@020d8000 {
+				compatible = "fsl,imx6q-src";
+				reg = <0x020d8000 0x4000>;
+				interrupts = <0 91 0x04 0 96 0x04>;
+			};
+
+			gpc: gpc@020dc000 {
+				compatible = "fsl,imx6q-gpc";
+				reg = <0x020dc000 0x4000>;
+				interrupts = <0 89 0x04 0 90 0x04>;
+			};
+
+			gpr: iomuxc-gpr@020e0000 {
+				compatible = "fsl,imx6q-iomuxc-gpr", "syscon";
+				reg = <0x020e0000 0x38>;
+			};
+
+			dcic1: dcic@020e4000 {
+				reg = <0x020e4000 0x4000>;
+				interrupts = <0 124 0x04>;
+			};
+
+			dcic2: dcic@020e8000 {
+				reg = <0x020e8000 0x4000>;
+				interrupts = <0 125 0x04>;
+			};
+
+			sdma: sdma@020ec000 {
+				compatible = "fsl,imx6q-sdma", "fsl,imx35-sdma";
+				reg = <0x020ec000 0x4000>;
+				interrupts = <0 2 0x04>;
+				clocks = <&clks 155>, <&clks 155>;
+				clock-names = "ipg", "ahb";
+				fsl,sdma-ram-script-name = "imx/sdma/sdma-imx6q.bin";
+			};
+		};
+
+		aips-bus@02100000 { /* AIPS2 */
+			compatible = "fsl,aips-bus", "simple-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			reg = <0x02100000 0x100000>;
+			ranges;
+
+			caam@02100000 {
+				reg = <0x02100000 0x40000>;
+				interrupts = <0 105 0x04 0 106 0x04>;
+			};
+
+			aipstz@0217c000 { /* AIPSTZ2 */
+				reg = <0x0217c000 0x4000>;
+			};
+
+			usbotg: usb@02184000 {
+				compatible = "fsl,imx6q-usb", "fsl,imx27-usb";
+				reg = <0x02184000 0x200>;
+				interrupts = <0 43 0x04>;
+				clocks = <&clks 162>;
+				fsl,usbphy = <&usbphy1>;
+				fsl,usbmisc = <&usbmisc 0>;
+				status = "disabled";
+			};
+
+			usbh1: usb@02184200 {
+				compatible = "fsl,imx6q-usb", "fsl,imx27-usb";
+				reg = <0x02184200 0x200>;
+				interrupts = <0 40 0x04>;
+				clocks = <&clks 162>;
+				fsl,usbphy = <&usbphy2>;
+				fsl,usbmisc = <&usbmisc 1>;
+				status = "disabled";
+			};
+
+			usbh2: usb@02184400 {
+				compatible = "fsl,imx6q-usb", "fsl,imx27-usb";
+				reg = <0x02184400 0x200>;
+				interrupts = <0 41 0x04>;
+				clocks = <&clks 162>;
+				fsl,usbmisc = <&usbmisc 2>;
+				status = "disabled";
+			};
+
+			usbh3: usb@02184600 {
+				compatible = "fsl,imx6q-usb", "fsl,imx27-usb";
+				reg = <0x02184600 0x200>;
+				interrupts = <0 42 0x04>;
+				clocks = <&clks 162>;
+				fsl,usbmisc = <&usbmisc 3>;
+				status = "disabled";
+			};
+
+			usbmisc: usbmisc: usbmisc@02184800 {
+				#index-cells = <1>;
+				compatible = "fsl,imx6q-usbmisc";
+				reg = <0x02184800 0x200>;
+				clocks = <&clks 162>;
+			};
+
+			fec: ethernet@02188000 {
+				compatible = "fsl,imx6q-fec";
+				reg = <0x02188000 0x4000>;
+				interrupts = <0 118 0x04 0 119 0x04>;
+				clocks = <&clks 117>, <&clks 117>, <&clks 190>;
+				clock-names = "ipg", "ahb", "ptp";
+				status = "disabled";
+			};
+
+			mlb@0218c000 {
+				reg = <0x0218c000 0x4000>;
+				interrupts = <0 53 0x04 0 117 0x04 0 126 0x04>;
+			};
+
+			usdhc1: usdhc@02190000 {
+				compatible = "fsl,imx6q-usdhc";
+				reg = <0x02190000 0x4000>;
+				interrupts = <0 22 0x04>;
+				clocks = <&clks 163>, <&clks 163>, <&clks 163>;
+				clock-names = "ipg", "ahb", "per";
+				bus-width = <4>;
+				status = "disabled";
+			};
+
+			usdhc2: usdhc@02194000 {
+				compatible = "fsl,imx6q-usdhc";
+				reg = <0x02194000 0x4000>;
+				interrupts = <0 23 0x04>;
+				clocks = <&clks 164>, <&clks 164>, <&clks 164>;
+				clock-names = "ipg", "ahb", "per";
+				bus-width = <4>;
+				status = "disabled";
+			};
+
+			usdhc3: usdhc@02198000 {
+				compatible = "fsl,imx6q-usdhc";
+				reg = <0x02198000 0x4000>;
+				interrupts = <0 24 0x04>;
+				clocks = <&clks 165>, <&clks 165>, <&clks 165>;
+				clock-names = "ipg", "ahb", "per";
+				bus-width = <4>;
+				status = "disabled";
+			};
+
+			usdhc4: usdhc@0219c000 {
+				compatible = "fsl,imx6q-usdhc";
+				reg = <0x0219c000 0x4000>;
+				interrupts = <0 25 0x04>;
+				clocks = <&clks 166>, <&clks 166>, <&clks 166>;
+				clock-names = "ipg", "ahb", "per";
+				bus-width = <4>;
+				status = "disabled";
+			};
+
+			i2c1: i2c@021a0000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,imx6q-i2c", "fsl,imx21-i2c";
+				reg = <0x021a0000 0x4000>;
+				interrupts = <0 36 0x04>;
+				clocks = <&clks 125>;
+				status = "disabled";
+			};
+
+			i2c2: i2c@021a4000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,imx6q-i2c", "fsl,imx21-i2c";
+				reg = <0x021a4000 0x4000>;
+				interrupts = <0 37 0x04>;
+				clocks = <&clks 126>;
+				status = "disabled";
+			};
+
+			i2c3: i2c@021a8000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,imx6q-i2c", "fsl,imx21-i2c";
+				reg = <0x021a8000 0x4000>;
+				interrupts = <0 38 0x04>;
+				clocks = <&clks 127>;
+				status = "disabled";
+			};
+
+			romcp@021ac000 {
+				reg = <0x021ac000 0x4000>;
+			};
+
+			mmdc0: mmdc@021b0000 { /* MMDC0 */
+				compatible = "fsl,imx6q-mmdc";
+				reg = <0x021b0000 0x4000>;
+			};
+
+			mmdc1: mmdc@021b4000 { /* MMDC1 */
+				reg = <0x021b4000 0x4000>;
+			};
+
+			weim@021b8000 {
+				reg = <0x021b8000 0x4000>;
+				interrupts = <0 14 0x04>;
+			};
+
+			ocotp@021bc000 {
+				compatible = "fsl,imx6q-ocotp";
+				reg = <0x021bc000 0x4000>;
+			};
+
+			ocotp@021c0000 {
+				reg = <0x021c0000 0x4000>;
+				interrupts = <0 21 0x04>;
+			};
+
+			tzasc@021d0000 { /* TZASC1 */
+				reg = <0x021d0000 0x4000>;
+				interrupts = <0 108 0x04>;
+			};
+
+			tzasc@021d4000 { /* TZASC2 */
+				reg = <0x021d4000 0x4000>;
+				interrupts = <0 109 0x04>;
+			};
+
+			audmux: audmux@021d8000 {
+				compatible = "fsl,imx6q-audmux", "fsl,imx31-audmux";
+				reg = <0x021d8000 0x4000>;
+				status = "disabled";
+			};
+
+			mipi@021dc000 { /* MIPI-CSI */
+				reg = <0x021dc000 0x4000>;
+			};
+
+			mipi@021e0000 { /* MIPI-DSI */
+				reg = <0x021e0000 0x4000>;
+			};
+
+			vdoa@021e4000 {
+				reg = <0x021e4000 0x4000>;
+				interrupts = <0 18 0x04>;
+			};
+
+			uart2: serial@021e8000 {
+				compatible = "fsl,imx6q-uart", "fsl,imx21-uart";
+				reg = <0x021e8000 0x4000>;
+				interrupts = <0 27 0x04>;
+				clocks = <&clks 160>, <&clks 161>;
+				clock-names = "ipg", "per";
+				status = "disabled";
+			};
+
+			uart3: serial@021ec000 {
+				compatible = "fsl,imx6q-uart", "fsl,imx21-uart";
+				reg = <0x021ec000 0x4000>;
+				interrupts = <0 28 0x04>;
+				clocks = <&clks 160>, <&clks 161>;
+				clock-names = "ipg", "per";
+				status = "disabled";
+			};
+
+			uart4: serial@021f0000 {
+				compatible = "fsl,imx6q-uart", "fsl,imx21-uart";
+				reg = <0x021f0000 0x4000>;
+				interrupts = <0 29 0x04>;
+				clocks = <&clks 160>, <&clks 161>;
+				clock-names = "ipg", "per";
+				status = "disabled";
+			};
+
+			uart5: serial@021f4000 {
+				compatible = "fsl,imx6q-uart", "fsl,imx21-uart";
+				reg = <0x021f4000 0x4000>;
+				interrupts = <0 30 0x04>;
+				clocks = <&clks 160>, <&clks 161>;
+				clock-names = "ipg", "per";
+				status = "disabled";
+			};
+		};
+
+		ipu1: ipu@02400000 {
+			#crtc-cells = <1>;
+			compatible = "fsl,imx6q-ipu";
+			reg = <0x02400000 0x400000>;
+			interrupts = <0 6 0x4 0 5 0x4>;
+			clocks = <&clks 130>, <&clks 131>, <&clks 132>;
+			clock-names = "bus", "di0", "di1";
+		};
+	};
+};

arch/arm/mach-imx/clk-imx51-imx53.c

@@ -83,6 +83,7 @@ enum imx5_clks {
 	ssi2_root_gate, ssi3_root_gate, ssi_ext1_gate, ssi_ext2_gate,
 	epit1_ipg_gate, epit1_hf_gate, epit2_ipg_gate, epit2_hf_gate,
 	can_sel, can1_serial_gate, can1_ipg_gate,
+	owire_gate,
 	clk_max
 };
 
@@ -233,12 +234,13 @@ static void __init mx5_clocks_common_init(unsigned long rate_ckil,
 	clk[epit1_hf_gate] = imx_clk_gate2("epit1_hf_gate", "per_root", MXC_CCM_CCGR2, 4);
 	clk[epit2_ipg_gate] = imx_clk_gate2("epit2_ipg_gate", "ipg", MXC_CCM_CCGR2, 6);
 	clk[epit2_hf_gate] = imx_clk_gate2("epit2_hf_gate", "per_root", MXC_CCM_CCGR2, 8);
+	clk[owire_gate] = imx_clk_gate2("owire_gate", "per_root", MXC_CCM_CCGR2, 22);
 
 	for (i = 0; i < ARRAY_SIZE(clk); i++)
 		if (IS_ERR(clk[i]))
 			pr_err("i.MX5 clk %d: register failed with %ld\n",
 				i, PTR_ERR(clk[i]));
-	
+
 	clk_register_clkdev(clk[gpt_hf_gate], "per", "imx-gpt.0");
 	clk_register_clkdev(clk[gpt_ipg_gate], "ipg", "imx-gpt.0");
 	clk_register_clkdev(clk[uart1_per_gate], "per", "imx21-uart.0");

arch/arm/mach-imx/clk-imx6q.c

@@ -154,8 +154,8 @@ enum mx6q_clks {
 	usdhc4, vdo_axi, vpu_axi, cko1, pll1_sys, pll2_bus, pll3_usb_otg,
 	pll4_audio, pll5_video, pll8_mlb, pll7_usb_host, pll6_enet, ssi1_ipg,
 	ssi2_ipg, ssi3_ipg, rom, usbphy1, usbphy2, ldb_di0_div_3_5, ldb_di1_div_3_5,
-	sata_ref, sata_ref_100m, pcie_ref, pcie_ref_125m, enet_ref,
-	clk_max
+	sata_ref, sata_ref_100m, pcie_ref, pcie_ref_125m, enet_ref, usbphy1_gate,
+	usbphy2_gate, clk_max
 };
 
 static struct clk *clk[clk_max];
@@ -208,8 +208,21 @@ int __init mx6q_clocks_init(void)
 	clk[pll7_usb_host] = imx_clk_pllv3(IMX_PLLV3_USB,	"pll7_usb_host","osc", base + 0x20, 0x3);
 	clk[pll8_mlb]      = imx_clk_pllv3(IMX_PLLV3_MLB,	"pll8_mlb",	"osc", base + 0xd0, 0x0);
 
-	clk[usbphy1] = imx_clk_gate("usbphy1", "pll3_usb_otg", base + 0x10, 6);
-	clk[usbphy2] = imx_clk_gate("usbphy2", "pll7_usb_host", base + 0x20, 6);
+	/*
+	 * Bit 20 is the reserved and read-only bit, we do this only for:
+	 * - Do nothing for usbphy clk_enable/disable
+	 * - Keep refcount when do usbphy clk_enable/disable, in that case,
+	 * the clk framework may need to enable/disable usbphy's parent
+	 */
+	clk[usbphy1] = imx_clk_gate("usbphy1", "pll3_usb_otg", base + 0x10, 20);
+	clk[usbphy2] = imx_clk_gate("usbphy2", "pll7_usb_host", base + 0x20, 20);
+
+	/*
+	 * usbphy*_gate needs to be on after system boots up, and software
+	 * never needs to control it anymore.
+	 */
+	clk[usbphy1_gate] = imx_clk_gate("usbphy1_gate", "dummy", base + 0x10, 6);
+	clk[usbphy2_gate] = imx_clk_gate("usbphy2_gate", "dummy", base + 0x20, 6);
 
 	clk[sata_ref] = imx_clk_fixed_factor("sata_ref", "pll6_enet", 1, 5);
 	clk[pcie_ref] = imx_clk_fixed_factor("pcie_ref", "pll6_enet", 1, 4);
@@ -436,6 +449,11 @@ int __init mx6q_clocks_init(void)
 	for (i = 0; i < ARRAY_SIZE(clks_init_on); i++)
 		clk_prepare_enable(clk[clks_init_on[i]]);
 
+	if (IS_ENABLED(CONFIG_USB_MXS_PHY)) {
+		clk_prepare_enable(clk[usbphy1_gate]);
+		clk_prepare_enable(clk[usbphy2_gate]);
+	}
+
 	/* Set initial power mode */
 	imx6q_set_lpm(WAIT_CLOCKED);
 

arch/arm/mach-imx/mach-imx6q.c

@@ -12,6 +12,7 @@
 
 #include <linux/clk.h>
 #include <linux/clkdev.h>
+#include <linux/cpu.h>
 #include <linux/cpuidle.h>
 #include <linux/delay.h>
 #include <linux/export.h>
@@ -22,6 +23,7 @@
 #include <linux/of_address.h>
 #include <linux/of_irq.h>
 #include <linux/of_platform.h>
+#include <linux/opp.h>
 #include <linux/phy.h>
 #include <linux/regmap.h>
 #include <linux/micrel_phy.h>
@@ -209,9 +211,72 @@ static struct cpuidle_driver imx6q_cpuidle_driver = {
 	.state_count		= 1,
 };
 
+#define OCOTP_CFG3			0x440
+#define OCOTP_CFG3_SPEED_SHIFT		16
+#define OCOTP_CFG3_SPEED_1P2GHZ		0x3
+
+static void __init imx6q_opp_check_1p2ghz(struct device *cpu_dev)
+{
+	struct device_node *np;
+	void __iomem *base;
+	u32 val;
+
+	np = of_find_compatible_node(NULL, NULL, "fsl,imx6q-ocotp");
+	if (!np) {
+		pr_warn("failed to find ocotp node\n");
+		return;
+	}
+
+	base = of_iomap(np, 0);
+	if (!base) {
+		pr_warn("failed to map ocotp\n");
+		goto put_node;
+	}
+
+	val = readl_relaxed(base + OCOTP_CFG3);
+	val >>= OCOTP_CFG3_SPEED_SHIFT;
+	if ((val & 0x3) != OCOTP_CFG3_SPEED_1P2GHZ)
+		if (opp_disable(cpu_dev, 1200000000))
+			pr_warn("failed to disable 1.2 GHz OPP\n");
+
+put_node:
+	of_node_put(np);
+}
+
+static void __init imx6q_opp_init(struct device *cpu_dev)
+{
+	struct device_node *np;
+
+	np = of_find_node_by_path("/cpus/cpu@0");
+	if (!np) {
+		pr_warn("failed to find cpu0 node\n");
+		return;
+	}
+
+	cpu_dev->of_node = np;
+	if (of_init_opp_table(cpu_dev)) {
+		pr_warn("failed to init OPP table\n");
+		goto put_node;
+	}
+
+	imx6q_opp_check_1p2ghz(cpu_dev);
+
+put_node:
+	of_node_put(np);
+}
+
+struct platform_device imx6q_cpufreq_pdev = {
+	.name = "imx6q-cpufreq",
+};
+
 static void __init imx6q_init_late(void)
 {
 	imx_cpuidle_init(&imx6q_cpuidle_driver);
+
+	if (IS_ENABLED(CONFIG_ARM_IMX6Q_CPUFREQ)) {
+		imx6q_opp_init(&imx6q_cpufreq_pdev.dev);
+		platform_device_register(&imx6q_cpufreq_pdev);
+	}
 }
 
 static void __init imx6q_map_io(void)

drivers/w1/masters/mxc_w1.c

@@ -186,9 +186,16 @@ static int mxc_w1_remove(struct platform_device *pdev)
 	return 0;
 }
 
+static struct of_device_id mxc_w1_dt_ids[] = {
+	{ .compatible = "fsl,imx21-owire" },
+	{ /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(of, mxc_w1_dt_ids);
+
 static struct platform_driver mxc_w1_driver = {
 	.driver = {
-		   .name = "mxc_w1",
+		.name = "mxc_w1",
+		.of_match_table = mxc_w1_dt_ids,
 	},
 	.probe = mxc_w1_probe,
 	.remove = mxc_w1_remove,