mtd: rawnand: Do not check FAIL bit when executing a SET_FEATURES op

The ONFI spec clearly says that FAIL bit is only valid for PROGRAM,
ERASE and READ-with-on-die-ECC operations, and should be ignored
otherwise.

It seems that checking it after sending a SET_FEATURES is a bad idea
because a previous READ, PROGRAM or ERASE op may have failed, and
depending on the implementation, the FAIL bit is not cleared until a
new READ, PROGRAM or ERASE is started.

This leads to ->set_features() returning -EIO while it actually worked,
which can sometimes stop a batch of READ/PROGRAM ops.

Note that we only fix the ->exec_op() path here, because some drivers
are abusing the NAND_STATUS_FAIL flag in their ->waitfunc()
implementation to propagate other kind of errors, like
wait-ready-timeout or controller-related errors. Let's not try to fix
those drivers since they worked fine so far.

Fixes: 8878b126df76 ("mtd: nand: add ->exec_op() implementation")
Cc: stable@vger.kernel.org
Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>
Acked-by: Miquel Raynal <miquel.raynal@bootlin.com>

drivers/mtd/nand/raw/nand_base.c

@@ -2169,7 +2169,6 @@ static int nand_set_features_op(struct nand_chip *chip, u8 feature,
 	struct mtd_info *mtd = nand_to_mtd(chip);
 	const u8 *params = data;
 	int i, ret;
-	u8 status;
 
 	if (chip->exec_op) {
 		const struct nand_sdr_timings *sdr =
@@ -2183,26 +2182,18 @@ static int nand_set_features_op(struct nand_chip *chip, u8 feature,
 		};
 		struct nand_operation op = NAND_OPERATION(instrs);
 
-		ret = nand_exec_op(chip, &op);
-		if (ret)
-			return ret;
-
-		ret = nand_status_op(chip, &status);
-		if (ret)
-			return ret;
-	} else {
-		chip->cmdfunc(mtd, NAND_CMD_SET_FEATURES, feature, -1);
-		for (i = 0; i < ONFI_SUBFEATURE_PARAM_LEN; ++i)
-			chip->write_byte(mtd, params[i]);
+		return nand_exec_op(chip, &op);
+	}
 
-		ret = chip->waitfunc(mtd, chip);
-		if (ret < 0)
-			return ret;
+	chip->cmdfunc(mtd, NAND_CMD_SET_FEATURES, feature, -1);
+	for (i = 0; i < ONFI_SUBFEATURE_PARAM_LEN; ++i)
+		chip->write_byte(mtd, params[i]);
 
-		status = ret;
-	}
+	ret = chip->waitfunc(mtd, chip);
+	if (ret < 0)
+		return ret;
 
-	if (status & NAND_STATUS_FAIL)
+	if (ret & NAND_STATUS_FAIL)
 		return -EIO;
 
 	return 0;