net: hns: Adjust the SBM module buffer threshold

HNS needs SMB Buffers to store at least two packets after sending
pause frame because of the link delay. The MTU of HNS is 9728. As
the processor user manual described, the SBM buffer threshold should
be modified.

Reported-by: Ping Zhang <zhangping5@huawei.com>
Signed-off-by: Kejian Yan <yankejian@huawei.com>
Reviewed-by: Salil Mehta <salil.mehta@huawei.com>
Signed-off-by: Salil Mehta <salil.mehta@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

drivers/net/ethernet/hisilicon/hns/hns_dsaf_main.c

@@ -510,10 +510,10 @@ static void hns_dsafv2_sbm_bp_wl_cfg(struct dsaf_device *dsaf_dev)
 		o_sbm_bp_cfg = dsaf_read_dev(dsaf_dev, reg);
 		dsaf_set_field(o_sbm_bp_cfg,
 			       DSAFV2_SBM_CFG3_SET_BUF_NUM_NO_PFC_M,
-			       DSAFV2_SBM_CFG3_SET_BUF_NUM_NO_PFC_S, 48);
+			       DSAFV2_SBM_CFG3_SET_BUF_NUM_NO_PFC_S, 55);
 		dsaf_set_field(o_sbm_bp_cfg,
 			       DSAFV2_SBM_CFG3_RESET_BUF_NUM_NO_PFC_M,
-			       DSAFV2_SBM_CFG3_RESET_BUF_NUM_NO_PFC_S, 80);
+			       DSAFV2_SBM_CFG3_RESET_BUF_NUM_NO_PFC_S, 110);
 		dsaf_write_dev(dsaf_dev, reg, o_sbm_bp_cfg);
 
 		/* for no enable pfc mode */
@@ -521,10 +521,10 @@ static void hns_dsafv2_sbm_bp_wl_cfg(struct dsaf_device *dsaf_dev)
 		o_sbm_bp_cfg = dsaf_read_dev(dsaf_dev, reg);
 		dsaf_set_field(o_sbm_bp_cfg,
 			       DSAFV2_SBM_CFG4_SET_BUF_NUM_NO_PFC_M,
-			       DSAFV2_SBM_CFG4_SET_BUF_NUM_NO_PFC_S, 192);
+			       DSAFV2_SBM_CFG4_SET_BUF_NUM_NO_PFC_S, 128);
 		dsaf_set_field(o_sbm_bp_cfg,
 			       DSAFV2_SBM_CFG4_RESET_BUF_NUM_NO_PFC_M,
-			       DSAFV2_SBM_CFG4_RESET_BUF_NUM_NO_PFC_S, 240);
+			       DSAFV2_SBM_CFG4_RESET_BUF_NUM_NO_PFC_S, 192);
 		dsaf_write_dev(dsaf_dev, reg, o_sbm_bp_cfg);
 	}