Merge tag 'omap-for-v3.15/fixes-v3-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into fixes

Pull "omap fixes for v3.15-rc cycle" from Tony Lindgren:

Regression fixes for omaps for NAND, DMA, cpu_idle and audio.
Also a minor one line fix for audio clock on 54xx.

* tag 'omap-for-v3.15/fixes-v3-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
  ARM: OMAP4: Fix the boot regression with CPU_IDLE enabled
  ARM: OMAP2+: Fix DMA hang after off-idle
  ARM: OMAP2+: nand: Fix NAND on OMAP2 and OMAP3 boards
  ARM: omap5: hwmod_data: Correct IDLEMODE for McPDM
  ARM: OMAP3: clock: Back-propagate rate change from cam_mclk to dpll4_m5 on all OMAP3 platforms

Signed-off-by: Olof Johansson <olof@lixom.net>

arch/arm/mach-omap2/board-flash.c

@@ -142,7 +142,7 @@ __init board_nand_init(struct mtd_partition *nand_parts, u8 nr_parts, u8 cs,
 	board_nand_data.nr_parts	= nr_parts;
 	board_nand_data.devsize		= nand_type;
 
-	board_nand_data.ecc_opt = OMAP_ECC_BCH8_CODE_HW;
+	board_nand_data.ecc_opt = OMAP_ECC_HAM1_CODE_HW;
 	gpmc_nand_init(&board_nand_data, gpmc_t);
 }
 #endif /* CONFIG_MTD_NAND_OMAP2 || CONFIG_MTD_NAND_OMAP2_MODULE */

arch/arm/mach-omap2/cclock3xxx_data.c

@@ -456,7 +456,8 @@ static struct clk_hw_omap dpll4_m5x2_ck_hw = {
 	.clkdm_name	= "dpll4_clkdm",
 };
 
-DEFINE_STRUCT_CLK(dpll4_m5x2_ck, dpll4_m5x2_ck_parent_names, dpll4_m5x2_ck_ops);
+DEFINE_STRUCT_CLK_FLAGS(dpll4_m5x2_ck, dpll4_m5x2_ck_parent_names,
+			dpll4_m5x2_ck_ops, CLK_SET_RATE_PARENT);
 
 static struct clk dpll4_m5x2_ck_3630 = {
 	.name		= "dpll4_m5x2_ck",

arch/arm/mach-omap2/cpuidle44xx.c

@@ -14,6 +14,7 @@
 #include <linux/cpuidle.h>
 #include <linux/cpu_pm.h>
 #include <linux/export.h>
+#include <linux/clockchips.h>
 
 #include <asm/cpuidle.h>
 #include <asm/proc-fns.h>
@@ -83,6 +84,7 @@ static int omap_enter_idle_coupled(struct cpuidle_device *dev,
 {
 	struct idle_statedata *cx = state_ptr + index;
 	u32 mpuss_can_lose_context = 0;
+	int cpu_id = smp_processor_id();
 
 	/*
 	 * CPU0 has to wait and stay ON until CPU1 is OFF state.
@@ -110,6 +112,8 @@ static int omap_enter_idle_coupled(struct cpuidle_device *dev,
 	mpuss_can_lose_context = (cx->mpu_state == PWRDM_POWER_RET) &&
 				 (cx->mpu_logic_state == PWRDM_POWER_OFF);
 
+	clockevents_notify(CLOCK_EVT_NOTIFY_BROADCAST_ENTER, &cpu_id);
+
 	/*
 	 * Call idle CPU PM enter notifier chain so that
 	 * VFP and per CPU interrupt context is saved.
@@ -165,6 +169,8 @@ static int omap_enter_idle_coupled(struct cpuidle_device *dev,
 	if (dev->cpu == 0 && mpuss_can_lose_context)
 		cpu_cluster_pm_exit();
 
+	clockevents_notify(CLOCK_EVT_NOTIFY_BROADCAST_EXIT, &cpu_id);
+
 fail:
 	cpuidle_coupled_parallel_barrier(dev, &abort_barrier);
 	cpu_done[dev->cpu] = false;
@@ -172,6 +178,16 @@ fail:
 	return index;
 }
 
+/*
+ * For each cpu, setup the broadcast timer because local timers
+ * stops for the states above C1.
+ */
+static void omap_setup_broadcast_timer(void *arg)
+{
+	int cpu = smp_processor_id();
+	clockevents_notify(CLOCK_EVT_NOTIFY_BROADCAST_ON, &cpu);
+}
+
 static struct cpuidle_driver omap4_idle_driver = {
 	.name				= "omap4_idle",
 	.owner				= THIS_MODULE,
@@ -189,8 +205,7 @@ static struct cpuidle_driver omap4_idle_driver = {
 			/* C2 - CPU0 OFF + CPU1 OFF + MPU CSWR */
 			.exit_latency = 328 + 440,
 			.target_residency = 960,
-			.flags = CPUIDLE_FLAG_TIME_VALID | CPUIDLE_FLAG_COUPLED |
-			         CPUIDLE_FLAG_TIMER_STOP,
+			.flags = CPUIDLE_FLAG_TIME_VALID | CPUIDLE_FLAG_COUPLED,
 			.enter = omap_enter_idle_coupled,
 			.name = "C2",
 			.desc = "CPUx OFF, MPUSS CSWR",
@@ -199,8 +214,7 @@ static struct cpuidle_driver omap4_idle_driver = {
 			/* C3 - CPU0 OFF + CPU1 OFF + MPU OSWR */
 			.exit_latency = 460 + 518,
 			.target_residency = 1100,
-			.flags = CPUIDLE_FLAG_TIME_VALID | CPUIDLE_FLAG_COUPLED |
-			         CPUIDLE_FLAG_TIMER_STOP,
+			.flags = CPUIDLE_FLAG_TIME_VALID | CPUIDLE_FLAG_COUPLED,
 			.enter = omap_enter_idle_coupled,
 			.name = "C3",
 			.desc = "CPUx OFF, MPUSS OSWR",
@@ -231,5 +245,8 @@ int __init omap4_idle_init(void)
 	if (!cpu_clkdm[0] || !cpu_clkdm[1])
 		return -ENODEV;
 
+	/* Configure the broadcast timer on each cpu */
+	on_each_cpu(omap_setup_broadcast_timer, NULL, 1);
+
 	return cpuidle_register(&omap4_idle_driver, cpu_online_mask);
 }

arch/arm/mach-omap2/omap_hwmod_54xx_data.c

@@ -895,7 +895,7 @@ static struct omap_hwmod omap54xx_mcpdm_hwmod = {
 	 * current exception.
 	 */
 
-	.flags		= HWMOD_EXT_OPT_MAIN_CLK,
+	.flags		= HWMOD_EXT_OPT_MAIN_CLK | HWMOD_SWSUP_SIDLE,
 	.main_clk	= "pad_clks_ck",
 	.prcm = {
 		.omap4 = {

arch/arm/plat-omap/dma.c

@@ -70,6 +70,7 @@ static u32 errata;
 
 static struct omap_dma_global_context_registers {
 	u32 dma_irqenable_l0;
+	u32 dma_irqenable_l1;
 	u32 dma_ocp_sysconfig;
 	u32 dma_gcr;
 } omap_dma_global_context;
@@ -1973,10 +1974,17 @@ static struct irqaction omap24xx_dma_irq;
 
 /*----------------------------------------------------------------------------*/
 
+/*
+ * Note that we are currently using only IRQENABLE_L0 and L1.
+ * As the DSP may be using IRQENABLE_L2 and L3, let's not
+ * touch those for now.
+ */
 void omap_dma_global_context_save(void)
 {
 	omap_dma_global_context.dma_irqenable_l0 =
 		p->dma_read(IRQENABLE_L0, 0);
+	omap_dma_global_context.dma_irqenable_l1 =
+		p->dma_read(IRQENABLE_L1, 0);
 	omap_dma_global_context.dma_ocp_sysconfig =
 		p->dma_read(OCP_SYSCONFIG, 0);
 	omap_dma_global_context.dma_gcr = p->dma_read(GCR, 0);
@@ -1991,6 +1999,8 @@ void omap_dma_global_context_restore(void)
 		OCP_SYSCONFIG, 0);
 	p->dma_write(omap_dma_global_context.dma_irqenable_l0,
 		IRQENABLE_L0, 0);
+	p->dma_write(omap_dma_global_context.dma_irqenable_l1,
+		IRQENABLE_L1, 0);
 
 	if (IS_DMA_ERRATA(DMA_ROMCODE_BUG))
 		p->dma_write(0x3 , IRQSTATUS_L0, 0);