Merge branches 'thermal-core', 'thermal-soc' and 'thermal-int340x' of .git into next

drivers/thermal/cpu_cooling.c

@@ -4,6 +4,8 @@
  *  Copyright (C) 2012	Samsung Electronics Co., Ltd(http://www.samsung.com)
  *  Copyright (C) 2012  Amit Daniel <amit.kachhap@linaro.org>
  *
+ *  Copyright (C) 2014  Viresh Kumar <viresh.kumar@linaro.org>
+ *
  * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
  *  This program is free software; you can redistribute it and/or modify
  *  it under the terms of the GNU General Public License as published by
@@ -28,6 +30,20 @@
 #include <linux/cpu.h>
 #include <linux/cpu_cooling.h>
 
+/*
+ * Cooling state <-> CPUFreq frequency
+ *
+ * Cooling states are translated to frequencies throughout this driver and this
+ * is the relation between them.
+ *
+ * Highest cooling state corresponds to lowest possible frequency.
+ *
+ * i.e.
+ *	level 0 --> 1st Max Freq
+ *	level 1 --> 2nd Max Freq
+ *	...
+ */
+
 /**
  * struct cpufreq_cooling_device - data for cooling device with cpufreq
  * @id: unique integer value corresponding to each cpufreq_cooling_device
@@ -38,26 +54,27 @@
  *	cooling	devices.
  * @cpufreq_val: integer value representing the absolute value of the clipped
  *	frequency.
+ * @max_level: maximum cooling level. One less than total number of valid
+ *	cpufreq frequencies.
  * @allowed_cpus: all the cpus involved for this cpufreq_cooling_device.
  * @node: list_head to link all cpufreq_cooling_device together.
  *
- * This structure is required for keeping information of each
- * cpufreq_cooling_device registered. In order to prevent corruption of this a
- * mutex lock cooling_cpufreq_lock is used.
+ * This structure is required for keeping information of each registered
+ * cpufreq_cooling_device.
  */
 struct cpufreq_cooling_device {
 	int id;
 	struct thermal_cooling_device *cool_dev;
 	unsigned int cpufreq_state;
 	unsigned int cpufreq_val;
+	unsigned int max_level;
+	unsigned int *freq_table;	/* In descending order */
 	struct cpumask allowed_cpus;
 	struct list_head node;
 };
 static DEFINE_IDR(cpufreq_idr);
 static DEFINE_MUTEX(cooling_cpufreq_lock);
 
-static unsigned int cpufreq_dev_count;
-
 static LIST_HEAD(cpufreq_dev_list);
 
 /**
@@ -99,120 +116,30 @@ static void release_idr(struct idr *idr, int id)
 /* Below code defines functions to be used for cpufreq as cooling device */
 
 /**
- * is_cpufreq_valid - function to check frequency transitioning capability.
- * @cpu: cpu for which check is needed.
+ * get_level: Find the level for a particular frequency
+ * @cpufreq_dev: cpufreq_dev for which the property is required
+ * @freq: Frequency
  *
- * This function will check the current state of the system if
- * it is capable of changing the frequency for a given @cpu.
- *
- * Return: 0 if the system is not currently capable of changing
- * the frequency of given cpu. !0 in case the frequency is changeable.
+ * Return: level on success, THERMAL_CSTATE_INVALID on error.
  */
-static int is_cpufreq_valid(int cpu)
+static unsigned long get_level(struct cpufreq_cooling_device *cpufreq_dev,
+			       unsigned int freq)
 {
-	struct cpufreq_policy policy;
-
-	return !cpufreq_get_policy(&policy, cpu);
-}
-
-enum cpufreq_cooling_property {
-	GET_LEVEL,
-	GET_FREQ,
-	GET_MAXL,
-};
-
-/**
- * get_property - fetch a property of interest for a give cpu.
- * @cpu: cpu for which the property is required
- * @input: query parameter
- * @output: query return
- * @property: type of query (frequency, level, max level)
- *
- * This is the common function to
- * 1. get maximum cpu cooling states
- * 2. translate frequency to cooling state
- * 3. translate cooling state to frequency
- * Note that the code may be not in good shape
- * but it is written in this way in order to:
- * a) reduce duplicate code as most of the code can be shared.
- * b) make sure the logic is consistent when translating between
- *    cooling states and frequencies.
- *
- * Return: 0 on success, -EINVAL when invalid parameters are passed.
- */
-static int get_property(unsigned int cpu, unsigned long input,
-			unsigned int *output,
-			enum cpufreq_cooling_property property)
-{
-	int i;
-	unsigned long max_level = 0, level = 0;
-	unsigned int freq = CPUFREQ_ENTRY_INVALID;
-	int descend = -1;
-	struct cpufreq_frequency_table *pos, *table =
-					cpufreq_frequency_get_table(cpu);
-
-	if (!output)
-		return -EINVAL;
-
-	if (!table)
-		return -EINVAL;
-
-	cpufreq_for_each_valid_entry(pos, table) {
-		/* ignore duplicate entry */
-		if (freq == pos->frequency)
-			continue;
-
-		/* get the frequency order */
-		if (freq != CPUFREQ_ENTRY_INVALID && descend == -1)
-			descend = freq > pos->frequency;
-
-		freq = pos->frequency;
-		max_level++;
-	}
-
-	/* No valid cpu frequency entry */
-	if (max_level == 0)
-		return -EINVAL;
+	unsigned long level;
 
-	/* max_level is an index, not a counter */
-	max_level--;
+	for (level = 0; level <= cpufreq_dev->max_level; level++) {
+		if (freq == cpufreq_dev->freq_table[level])
+			return level;
 
-	/* get max level */
-	if (property == GET_MAXL) {
-		*output = (unsigned int)max_level;
-		return 0;
+		if (freq > cpufreq_dev->freq_table[level])
+			break;
 	}
 
-	if (property == GET_FREQ)
-		level = descend ? input : (max_level - input);
-
-	i = 0;
-	cpufreq_for_each_valid_entry(pos, table) {
-		/* ignore duplicate entry */
-		if (freq == pos->frequency)
-			continue;
-
-		/* now we have a valid frequency entry */
-		freq = pos->frequency;
-
-		if (property == GET_LEVEL && (unsigned int)input == freq) {
-			/* get level by frequency */
-			*output = descend ? i : (max_level - i);
-			return 0;
-		}
-		if (property == GET_FREQ && level == i) {
-			/* get frequency by level */
-			*output = freq;
-			return 0;
-		}
-		i++;
-	}
-
-	return -EINVAL;
+	return THERMAL_CSTATE_INVALID;
 }
 
 /**
- * cpufreq_cooling_get_level - for a give cpu, return the cooling level.
+ * cpufreq_cooling_get_level - for a given cpu, return the cooling level.
  * @cpu: cpu for which the level is required
  * @freq: the frequency of interest
  *
@@ -224,77 +151,21 @@ static int get_property(unsigned int cpu, unsigned long input,
  */
 unsigned long cpufreq_cooling_get_level(unsigned int cpu, unsigned int freq)
 {
-	unsigned int val;
-
-	if (get_property(cpu, (unsigned long)freq, &val, GET_LEVEL))
-		return THERMAL_CSTATE_INVALID;
-
-	return (unsigned long)val;
-}
-EXPORT_SYMBOL_GPL(cpufreq_cooling_get_level);
-
-/**
- * get_cpu_frequency - get the absolute value of frequency from level.
- * @cpu: cpu for which frequency is fetched.
- * @level: cooling level
- *
- * This function matches cooling level with frequency. Based on a cooling level
- * of frequency, equals cooling state of cpu cooling device, it will return
- * the corresponding frequency.
- *	e.g level=0 --> 1st MAX FREQ, level=1 ---> 2nd MAX FREQ, .... etc
- *
- * Return: 0 on error, the corresponding frequency otherwise.
- */
-static unsigned int get_cpu_frequency(unsigned int cpu, unsigned long level)
-{
-	int ret = 0;
-	unsigned int freq;
-
-	ret = get_property(cpu, level, &freq, GET_FREQ);
-	if (ret)
-		return 0;
-
-	return freq;
-}
-
-/**
- * cpufreq_apply_cooling - function to apply frequency clipping.
- * @cpufreq_device: cpufreq_cooling_device pointer containing frequency
- *	clipping data.
- * @cooling_state: value of the cooling state.
- *
- * Function used to make sure the cpufreq layer is aware of current thermal
- * limits. The limits are applied by updating the cpufreq policy.
- *
- * Return: 0 on success, an error code otherwise (-EINVAL in case wrong
- * cooling state).
- */
-static int cpufreq_apply_cooling(struct cpufreq_cooling_device *cpufreq_device,
-				 unsigned long cooling_state)
-{
-	unsigned int cpuid, clip_freq;
-	struct cpumask *mask = &cpufreq_device->allowed_cpus;
-	unsigned int cpu = cpumask_any(mask);
-
-
-	/* Check if the old cooling action is same as new cooling action */
-	if (cpufreq_device->cpufreq_state == cooling_state)
-		return 0;
-
-	clip_freq = get_cpu_frequency(cpu, cooling_state);
-	if (!clip_freq)
-		return -EINVAL;
-
-	cpufreq_device->cpufreq_state = cooling_state;
-	cpufreq_device->cpufreq_val = clip_freq;
+	struct cpufreq_cooling_device *cpufreq_dev;
 
-	for_each_cpu(cpuid, mask) {
-		if (is_cpufreq_valid(cpuid))
-			cpufreq_update_policy(cpuid);
+	mutex_lock(&cooling_cpufreq_lock);
+	list_for_each_entry(cpufreq_dev, &cpufreq_dev_list, node) {
+		if (cpumask_test_cpu(cpu, &cpufreq_dev->allowed_cpus)) {
+			mutex_unlock(&cooling_cpufreq_lock);
+			return get_level(cpufreq_dev, freq);
+		}
 	}
+	mutex_unlock(&cooling_cpufreq_lock);
 
-	return 0;
+	pr_err("%s: cpu:%d not part of any cooling device\n", __func__, cpu);
+	return THERMAL_CSTATE_INVALID;
 }
+EXPORT_SYMBOL_GPL(cpufreq_cooling_get_level);
 
 /**
  * cpufreq_thermal_notifier - notifier callback for cpufreq policy change.
@@ -324,11 +195,6 @@ static int cpufreq_thermal_notifier(struct notifier_block *nb,
 					&cpufreq_dev->allowed_cpus))
 			continue;
 
-		if (!cpufreq_dev->cpufreq_val)
-			cpufreq_dev->cpufreq_val = get_cpu_frequency(
-					cpumask_any(&cpufreq_dev->allowed_cpus),
-					cpufreq_dev->cpufreq_state);
-
 		max_freq = cpufreq_dev->cpufreq_val;
 
 		if (policy->max != max_freq)
@@ -355,19 +221,9 @@ static int cpufreq_get_max_state(struct thermal_cooling_device *cdev,
 				 unsigned long *state)
 {
 	struct cpufreq_cooling_device *cpufreq_device = cdev->devdata;
-	struct cpumask *mask = &cpufreq_device->allowed_cpus;
-	unsigned int cpu;
-	unsigned int count = 0;
-	int ret;
-
-	cpu = cpumask_any(mask);
-
-	ret = get_property(cpu, 0, &count, GET_MAXL);
 
-	if (count > 0)
-		*state = count;
-
-	return ret;
+	*state = cpufreq_device->max_level;
+	return 0;
 }
 
 /**
@@ -404,8 +260,24 @@ static int cpufreq_set_cur_state(struct thermal_cooling_device *cdev,
 				 unsigned long state)
 {
 	struct cpufreq_cooling_device *cpufreq_device = cdev->devdata;
+	unsigned int cpu = cpumask_any(&cpufreq_device->allowed_cpus);
+	unsigned int clip_freq;
+
+	/* Request state should be less than max_level */
+	if (WARN_ON(state > cpufreq_device->max_level))
+		return -EINVAL;
+
+	/* Check if the old cooling action is same as new cooling action */
+	if (cpufreq_device->cpufreq_state == state)
+		return 0;
 
-	return cpufreq_apply_cooling(cpufreq_device, state);
+	clip_freq = cpufreq_device->freq_table[state];
+	cpufreq_device->cpufreq_state = state;
+	cpufreq_device->cpufreq_val = clip_freq;
+
+	cpufreq_update_policy(cpu);
+
+	return 0;
 }
 
 /* Bind cpufreq callbacks to thermal cooling device ops */
@@ -420,10 +292,25 @@ static struct notifier_block thermal_cpufreq_notifier_block = {
 	.notifier_call = cpufreq_thermal_notifier,
 };
 
+static unsigned int find_next_max(struct cpufreq_frequency_table *table,
+				  unsigned int prev_max)
+{
+	struct cpufreq_frequency_table *pos;
+	unsigned int max = 0;
+
+	cpufreq_for_each_valid_entry(pos, table) {
+		if (pos->frequency > max && pos->frequency < prev_max)
+			max = pos->frequency;
+	}
+
+	return max;
+}
+
 /**
  * __cpufreq_cooling_register - helper function to create cpufreq cooling device
  * @np: a valid struct device_node to the cooling device device tree node
  * @clip_cpus: cpumask of cpus where the frequency constraints will happen.
+ * Normally this should be same as cpufreq policy->related_cpus.
  *
  * This interface function registers the cpufreq cooling device with the name
  * "thermal-cpufreq-%x". This api can support multiple instances of cpufreq
@@ -438,37 +325,42 @@ __cpufreq_cooling_register(struct device_node *np,
 			   const struct cpumask *clip_cpus)
 {
 	struct thermal_cooling_device *cool_dev;
-	struct cpufreq_cooling_device *cpufreq_dev = NULL;
-	unsigned int min = 0, max = 0;
+	struct cpufreq_cooling_device *cpufreq_dev;
 	char dev_name[THERMAL_NAME_LENGTH];
-	int ret = 0, i;
-	struct cpufreq_policy policy;
+	struct cpufreq_frequency_table *pos, *table;
+	unsigned int freq, i;
+	int ret;
 
-	/* Verify that all the clip cpus have same freq_min, freq_max limit */
-	for_each_cpu(i, clip_cpus) {
-		/* continue if cpufreq policy not found and not return error */
-		if (!cpufreq_get_policy(&policy, i))
-			continue;
-		if (min == 0 && max == 0) {
-			min = policy.cpuinfo.min_freq;
-			max = policy.cpuinfo.max_freq;
-		} else {
-			if (min != policy.cpuinfo.min_freq ||
-			    max != policy.cpuinfo.max_freq)
-				return ERR_PTR(-EINVAL);
-		}
+	table = cpufreq_frequency_get_table(cpumask_first(clip_cpus));
+	if (!table) {
+		pr_debug("%s: CPUFreq table not found\n", __func__);
+		return ERR_PTR(-EPROBE_DEFER);
 	}
-	cpufreq_dev = kzalloc(sizeof(struct cpufreq_cooling_device),
-			      GFP_KERNEL);
+
+	cpufreq_dev = kzalloc(sizeof(*cpufreq_dev), GFP_KERNEL);
 	if (!cpufreq_dev)
 		return ERR_PTR(-ENOMEM);
 
+	/* Find max levels */
+	cpufreq_for_each_valid_entry(pos, table)
+		cpufreq_dev->max_level++;
+
+	cpufreq_dev->freq_table = kmalloc(sizeof(*cpufreq_dev->freq_table) *
+					  cpufreq_dev->max_level, GFP_KERNEL);
+	if (!cpufreq_dev->freq_table) {
+		cool_dev = ERR_PTR(-ENOMEM);
+		goto free_cdev;
+	}
+
+	/* max_level is an index, not a counter */
+	cpufreq_dev->max_level--;
+
 	cpumask_copy(&cpufreq_dev->allowed_cpus, clip_cpus);
 
 	ret = get_idr(&cpufreq_idr, &cpufreq_dev->id);
 	if (ret) {
-		kfree(cpufreq_dev);
-		return ERR_PTR(-EINVAL);
+		cool_dev = ERR_PTR(ret);
+		goto free_table;
 	}
 
 	snprintf(dev_name, sizeof(dev_name), "thermal-cpufreq-%d",
@@ -476,24 +368,43 @@ __cpufreq_cooling_register(struct device_node *np,
 
 	cool_dev = thermal_of_cooling_device_register(np, dev_name, cpufreq_dev,
 						      &cpufreq_cooling_ops);
-	if (IS_ERR(cool_dev)) {
-		release_idr(&cpufreq_idr, cpufreq_dev->id);
-		kfree(cpufreq_dev);
-		return cool_dev;
+	if (IS_ERR(cool_dev))
+		goto remove_idr;
+
+	/* Fill freq-table in descending order of frequencies */
+	for (i = 0, freq = -1; i <= cpufreq_dev->max_level; i++) {
+		freq = find_next_max(table, freq);
+		cpufreq_dev->freq_table[i] = freq;
+
+		/* Warn for duplicate entries */
+		if (!freq)
+			pr_warn("%s: table has duplicate entries\n", __func__);
+		else
+			pr_debug("%s: freq:%u KHz\n", __func__, freq);
 	}
+
+	cpufreq_dev->cpufreq_val = cpufreq_dev->freq_table[0];
 	cpufreq_dev->cool_dev = cool_dev;
-	cpufreq_dev->cpufreq_state = 0;
+
 	mutex_lock(&cooling_cpufreq_lock);
 
 	/* Register the notifier for first cpufreq cooling device */
-	if (cpufreq_dev_count == 0)
+	if (list_empty(&cpufreq_dev_list))
 		cpufreq_register_notifier(&thermal_cpufreq_notifier_block,
 					  CPUFREQ_POLICY_NOTIFIER);
-	cpufreq_dev_count++;
 	list_add(&cpufreq_dev->node, &cpufreq_dev_list);
 
 	mutex_unlock(&cooling_cpufreq_lock);
 
+	return cool_dev;
+
+remove_idr:
+	release_idr(&cpufreq_idr, cpufreq_dev->id);
+free_table:
+	kfree(cpufreq_dev->freq_table);
+free_cdev:
+	kfree(cpufreq_dev);
+
 	return cool_dev;
 }
 
@@ -555,16 +466,16 @@ void cpufreq_cooling_unregister(struct thermal_cooling_device *cdev)
 	cpufreq_dev = cdev->devdata;
 	mutex_lock(&cooling_cpufreq_lock);
 	list_del(&cpufreq_dev->node);
-	cpufreq_dev_count--;
 
 	/* Unregister the notifier for the last cpufreq cooling device */
-	if (cpufreq_dev_count == 0)
+	if (list_empty(&cpufreq_dev_list))
 		cpufreq_unregister_notifier(&thermal_cpufreq_notifier_block,
 					    CPUFREQ_POLICY_NOTIFIER);
 	mutex_unlock(&cooling_cpufreq_lock);
 
 	thermal_cooling_device_unregister(cpufreq_dev->cool_dev);
 	release_idr(&cpufreq_idr, cpufreq_dev->id);
+	kfree(cpufreq_dev->freq_table);
 	kfree(cpufreq_dev);
 }
 EXPORT_SYMBOL_GPL(cpufreq_cooling_unregister);

drivers/thermal/db8500_cpufreq_cooling.c

@@ -18,7 +18,6 @@
  */
 
 #include <linux/cpu_cooling.h>
-#include <linux/cpufreq.h>
 #include <linux/err.h>
 #include <linux/module.h>
 #include <linux/of.h>
@@ -28,18 +27,17 @@
 static int db8500_cpufreq_cooling_probe(struct platform_device *pdev)
 {
 	struct thermal_cooling_device *cdev;
-	struct cpumask mask_val;
-
-	/* make sure cpufreq driver has been initialized */
-	if (!cpufreq_frequency_get_table(0))
-		return -EPROBE_DEFER;
-
-	cpumask_set_cpu(0, &mask_val);
-	cdev = cpufreq_cooling_register(&mask_val);
 
+	cdev = cpufreq_cooling_register(cpu_present_mask);
 	if (IS_ERR(cdev)) {
-		dev_err(&pdev->dev, "Failed to register cooling device\n");
-		return PTR_ERR(cdev);
+		int ret = PTR_ERR(cdev);
+
+		if (ret != -EPROBE_DEFER)
+			dev_err(&pdev->dev,
+				"Failed to register cooling device %d\n",
+				ret);
+				
+		return ret;
 	}
 
 	platform_set_drvdata(pdev, cdev);

drivers/thermal/imx_thermal.c

@@ -9,7 +9,6 @@
 
 #include <linux/clk.h>
 #include <linux/cpu_cooling.h>
-#include <linux/cpufreq.h>
 #include <linux/delay.h>
 #include <linux/device.h>
 #include <linux/init.h>
@@ -454,15 +453,10 @@ static int imx_thermal_probe(struct platform_device *pdev)
 	const struct of_device_id *of_id =
 		of_match_device(of_imx_thermal_match, &pdev->dev);
 	struct imx_thermal_data *data;
-	struct cpumask clip_cpus;
 	struct regmap *map;
 	int measure_freq;
 	int ret;
 
-	if (!cpufreq_get_current_driver()) {
-		dev_dbg(&pdev->dev, "no cpufreq driver!");
-		return -EPROBE_DEFER;
-	}
 	data = devm_kzalloc(&pdev->dev, sizeof(*data), GFP_KERNEL);
 	if (!data)
 		return -ENOMEM;
@@ -516,12 +510,13 @@ static int imx_thermal_probe(struct platform_device *pdev)
 	regmap_write(map, MISC0 + REG_SET, MISC0_REFTOP_SELBIASOFF);
 	regmap_write(map, TEMPSENSE0 + REG_SET, TEMPSENSE0_POWER_DOWN);
 
-	cpumask_set_cpu(0, &clip_cpus);
-	data->cdev = cpufreq_cooling_register(&clip_cpus);
+	data->cdev = cpufreq_cooling_register(cpu_present_mask);
 	if (IS_ERR(data->cdev)) {
 		ret = PTR_ERR(data->cdev);
-		dev_err(&pdev->dev,
-			"failed to register cpufreq cooling device: %d\n", ret);
+		if (ret != -EPROBE_DEFER)
+			dev_err(&pdev->dev,
+				"failed to register cpufreq cooling device: %d\n",
+				ret);
 		return ret;
 	}
 

drivers/thermal/int340x_thermal/Makefile

@@ -1,4 +1,5 @@
 obj-$(CONFIG_INT340X_THERMAL)	+= int3400_thermal.o
 obj-$(CONFIG_INT340X_THERMAL)	+= int3402_thermal.o
 obj-$(CONFIG_INT340X_THERMAL)	+= int3403_thermal.o
+obj-$(CONFIG_INT340X_THERMAL)	+= processor_thermal_device.o
 obj-$(CONFIG_ACPI_THERMAL_REL)	+= acpi_thermal_rel.o

drivers/thermal/int340x_thermal/acpi_thermal_rel.c

@@ -82,7 +82,7 @@ int acpi_parse_trt(acpi_handle handle, int *trt_count, struct trt **trtp,
 	struct acpi_buffer trt_format = { sizeof("RRNNNNNN"), "RRNNNNNN" };
 
 	if (!acpi_has_method(handle, "_TRT"))
-		return 0;
+		return -ENODEV;
 
 	status = acpi_evaluate_object(handle, "_TRT", NULL, &buffer);
 	if (ACPI_FAILURE(status))
@@ -167,7 +167,7 @@ int acpi_parse_art(acpi_handle handle, int *art_count, struct art **artp,
 		sizeof("RRNNNNNNNNNNN"), "RRNNNNNNNNNNN" };
 
 	if (!acpi_has_method(handle, "_ART"))
-		return 0;
+		return -ENODEV;
 
 	status = acpi_evaluate_object(handle, "_ART", NULL, &buffer);
 	if (ACPI_FAILURE(status))
@@ -321,8 +321,8 @@ static long acpi_thermal_rel_ioctl(struct file *f, unsigned int cmd,
 	unsigned long length = 0;
 	int count = 0;
 	char __user *arg = (void __user *)__arg;
-	struct trt *trts;
-	struct art *arts;
+	struct trt *trts = NULL;
+	struct art *arts = NULL;
 
 	switch (cmd) {
 	case ACPI_THERMAL_GET_TRT_COUNT:

drivers/thermal/int340x_thermal/int3400_thermal.c

@@ -335,7 +335,6 @@ static struct platform_driver int3400_thermal_driver = {
 	.remove = int3400_thermal_remove,
 	.driver = {
 		   .name = "int3400 thermal",
-		   .owner = THIS_MODULE,
 		   .acpi_match_table = ACPI_PTR(int3400_thermal_match),
 		   },
 };

drivers/thermal/int340x_thermal/int3402_thermal.c

@@ -231,7 +231,6 @@ static struct platform_driver int3402_thermal_driver = {
 	.remove = int3402_thermal_remove,
 	.driver = {
 		   .name = "int3402 thermal",
-		   .owner = THIS_MODULE,
 		   .acpi_match_table = int3402_thermal_match,
 		   },
 };

drivers/thermal/int340x_thermal/int3403_thermal.c

@@ -301,6 +301,8 @@ static int int3403_sensor_remove(struct int3403_priv *priv)
 {
 	struct int3403_sensor *obj = priv->priv;
 
+	acpi_remove_notify_handler(priv->adev->handle,
+				   ACPI_DEVICE_NOTIFY, int3403_notify);
 	thermal_zone_device_unregister(obj->tzone);
 	return 0;
 }
@@ -369,6 +371,7 @@ static int int3403_cdev_add(struct int3403_priv *priv)
 	p = buf.pointer;
 	if (!p || (p->type != ACPI_TYPE_PACKAGE)) {
 		printk(KERN_WARNING "Invalid PPSS data\n");
+		kfree(buf.pointer);
 		return -EFAULT;
 	}
 
@@ -381,6 +384,7 @@ static int int3403_cdev_add(struct int3403_priv *priv)
 
 	priv->priv = obj;
 
+	kfree(buf.pointer);
 	/* TODO: add ACPI notification support */
 
 	return result;

drivers/thermal/int340x_thermal/processor_thermal_device.c

@@ -0,0 +1,309 @@
+/*
+ * processor_thermal_device.c
+ * Copyright (c) 2014, Intel Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ */
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/pci.h>
+#include <linux/platform_device.h>
+#include <linux/acpi.h>
+
+/* Broadwell-U/HSB thermal reporting device */
+#define PCI_DEVICE_ID_PROC_BDW_THERMAL	0x1603
+#define PCI_DEVICE_ID_PROC_HSB_THERMAL	0x0A03
+
+/* Braswell thermal reporting device */
+#define PCI_DEVICE_ID_PROC_BSW_THERMAL	0x22DC
+
+struct power_config {
+	u32	index;
+	u32	min_uw;
+	u32	max_uw;
+	u32	tmin_us;
+	u32	tmax_us;
+	u32	step_uw;
+};
+
+struct proc_thermal_device {
+	struct device *dev;
+	struct acpi_device *adev;
+	struct power_config power_limits[2];
+};
+
+enum proc_thermal_emum_mode_type {
+	PROC_THERMAL_NONE,
+	PROC_THERMAL_PCI,
+	PROC_THERMAL_PLATFORM_DEV
+};
+
+/*
+ * We can have only one type of enumeration, PCI or Platform,
+ * not both. So we don't need instance specific data.
+ */
+static enum proc_thermal_emum_mode_type proc_thermal_emum_mode =
+							PROC_THERMAL_NONE;
+
+#define POWER_LIMIT_SHOW(index, suffix) \
+static ssize_t power_limit_##index##_##suffix##_show(struct device *dev, \
+					struct device_attribute *attr, \
+					char *buf) \
+{ \
+	struct pci_dev *pci_dev; \
+	struct platform_device *pdev; \
+	struct proc_thermal_device *proc_dev; \
+\
+	if (proc_thermal_emum_mode == PROC_THERMAL_PLATFORM_DEV) { \
+		pdev = to_platform_device(dev); \
+		proc_dev = platform_get_drvdata(pdev); \
+	} else { \
+		pci_dev = to_pci_dev(dev); \
+		proc_dev = pci_get_drvdata(pci_dev); \
+	} \
+	return sprintf(buf, "%lu\n",\
+	(unsigned long)proc_dev->power_limits[index].suffix * 1000); \
+}
+
+POWER_LIMIT_SHOW(0, min_uw)
+POWER_LIMIT_SHOW(0, max_uw)
+POWER_LIMIT_SHOW(0, step_uw)
+POWER_LIMIT_SHOW(0, tmin_us)
+POWER_LIMIT_SHOW(0, tmax_us)
+
+POWER_LIMIT_SHOW(1, min_uw)
+POWER_LIMIT_SHOW(1, max_uw)
+POWER_LIMIT_SHOW(1, step_uw)
+POWER_LIMIT_SHOW(1, tmin_us)
+POWER_LIMIT_SHOW(1, tmax_us)
+
+static DEVICE_ATTR_RO(power_limit_0_min_uw);
+static DEVICE_ATTR_RO(power_limit_0_max_uw);
+static DEVICE_ATTR_RO(power_limit_0_step_uw);
+static DEVICE_ATTR_RO(power_limit_0_tmin_us);
+static DEVICE_ATTR_RO(power_limit_0_tmax_us);
+
+static DEVICE_ATTR_RO(power_limit_1_min_uw);
+static DEVICE_ATTR_RO(power_limit_1_max_uw);
+static DEVICE_ATTR_RO(power_limit_1_step_uw);
+static DEVICE_ATTR_RO(power_limit_1_tmin_us);
+static DEVICE_ATTR_RO(power_limit_1_tmax_us);
+
+static struct attribute *power_limit_attrs[] = {
+	&dev_attr_power_limit_0_min_uw.attr,
+	&dev_attr_power_limit_1_min_uw.attr,
+	&dev_attr_power_limit_0_max_uw.attr,
+	&dev_attr_power_limit_1_max_uw.attr,
+	&dev_attr_power_limit_0_step_uw.attr,
+	&dev_attr_power_limit_1_step_uw.attr,
+	&dev_attr_power_limit_0_tmin_us.attr,
+	&dev_attr_power_limit_1_tmin_us.attr,
+	&dev_attr_power_limit_0_tmax_us.attr,
+	&dev_attr_power_limit_1_tmax_us.attr,
+	NULL
+};
+
+static struct attribute_group power_limit_attribute_group = {
+	.attrs = power_limit_attrs,
+	.name = "power_limits"
+};
+
+static int proc_thermal_add(struct device *dev,
+			    struct proc_thermal_device **priv)
+{
+	struct proc_thermal_device *proc_priv;
+	struct acpi_device *adev;
+	acpi_status status;
+	struct acpi_buffer buf = { ACPI_ALLOCATE_BUFFER, NULL };
+	union acpi_object *elements, *ppcc;
+	union acpi_object *p;
+	int i;
+	int ret;
+
+	adev = ACPI_COMPANION(dev);
+
+	status = acpi_evaluate_object(adev->handle, "PPCC", NULL, &buf);
+	if (ACPI_FAILURE(status))
+		return -ENODEV;
+
+	p = buf.pointer;
+	if (!p || (p->type != ACPI_TYPE_PACKAGE)) {
+		dev_err(dev, "Invalid PPCC data\n");
+		ret = -EFAULT;
+		goto free_buffer;
+	}
+	if (!p->package.count) {
+		dev_err(dev, "Invalid PPCC package size\n");
+		ret = -EFAULT;
+		goto free_buffer;
+	}
+
+	proc_priv = devm_kzalloc(dev, sizeof(*proc_priv), GFP_KERNEL);
+	if (!proc_priv) {
+		ret = -ENOMEM;
+		goto free_buffer;
+	}
+
+	proc_priv->dev = dev;
+	proc_priv->adev = adev;
+
+	for (i = 0; i < min((int)p->package.count - 1, 2); ++i) {
+		elements = &(p->package.elements[i+1]);
+		if (elements->type != ACPI_TYPE_PACKAGE ||
+		    elements->package.count != 6) {
+			ret = -EFAULT;
+			goto free_buffer;
+		}
+		ppcc = elements->package.elements;
+		proc_priv->power_limits[i].index = ppcc[0].integer.value;
+		proc_priv->power_limits[i].min_uw = ppcc[1].integer.value;
+		proc_priv->power_limits[i].max_uw = ppcc[2].integer.value;
+		proc_priv->power_limits[i].tmin_us = ppcc[3].integer.value;
+		proc_priv->power_limits[i].tmax_us = ppcc[4].integer.value;
+		proc_priv->power_limits[i].step_uw = ppcc[5].integer.value;
+	}
+
+	*priv = proc_priv;
+
+	ret = sysfs_create_group(&dev->kobj,
+				 &power_limit_attribute_group);
+
+free_buffer:
+	kfree(buf.pointer);
+
+	return ret;
+}
+
+void proc_thermal_remove(struct proc_thermal_device *proc_priv)
+{
+	sysfs_remove_group(&proc_priv->dev->kobj,
+			   &power_limit_attribute_group);
+}
+
+static int int3401_add(struct platform_device *pdev)
+{
+	struct proc_thermal_device *proc_priv;
+	int ret;
+
+	if (proc_thermal_emum_mode == PROC_THERMAL_PCI) {
+		dev_err(&pdev->dev, "error: enumerated as PCI dev\n");
+		return -ENODEV;
+	}
+
+	ret = proc_thermal_add(&pdev->dev, &proc_priv);
+	if (ret)
+		return ret;
+
+	platform_set_drvdata(pdev, proc_priv);
+	proc_thermal_emum_mode = PROC_THERMAL_PLATFORM_DEV;
+
+	return 0;
+}
+
+static int int3401_remove(struct platform_device *pdev)
+{
+	proc_thermal_remove(platform_get_drvdata(pdev));
+
+	return 0;
+}
+
+static int  proc_thermal_pci_probe(struct pci_dev *pdev,
+				   const struct pci_device_id *unused)
+{
+	struct proc_thermal_device *proc_priv;
+	int ret;
+
+	if (proc_thermal_emum_mode == PROC_THERMAL_PLATFORM_DEV) {
+		dev_err(&pdev->dev, "error: enumerated as platform dev\n");
+		return -ENODEV;
+	}
+
+	ret = pci_enable_device(pdev);
+	if (ret < 0) {
+		dev_err(&pdev->dev, "error: could not enable device\n");
+		return ret;
+	}
+
+	ret = proc_thermal_add(&pdev->dev, &proc_priv);
+	if (ret) {
+		pci_disable_device(pdev);
+		return ret;
+	}
+
+	pci_set_drvdata(pdev, proc_priv);
+	proc_thermal_emum_mode = PROC_THERMAL_PCI;
+
+	return 0;
+}
+
+static void  proc_thermal_pci_remove(struct pci_dev *pdev)
+{
+	proc_thermal_remove(pci_get_drvdata(pdev));
+	pci_disable_device(pdev);
+}
+
+static const struct pci_device_id proc_thermal_pci_ids[] = {
+	{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_PROC_BDW_THERMAL)},
+	{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_PROC_HSB_THERMAL)},
+	{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_PROC_BSW_THERMAL)},
+	{ 0, },
+};
+
+MODULE_DEVICE_TABLE(pci, proc_thermal_pci_ids);
+
+static struct pci_driver proc_thermal_pci_driver = {
+	.name		= "proc_thermal",
+	.probe		= proc_thermal_pci_probe,
+	.remove		= proc_thermal_pci_remove,
+	.id_table	= proc_thermal_pci_ids,
+};
+
+static const struct acpi_device_id int3401_device_ids[] = {
+	{"INT3401", 0},
+	{"", 0},
+};
+MODULE_DEVICE_TABLE(acpi, int3401_device_ids);
+
+static struct platform_driver int3401_driver = {
+	.probe = int3401_add,
+	.remove = int3401_remove,
+	.driver = {
+		.name = "int3401 thermal",
+		.acpi_match_table = int3401_device_ids,
+	},
+};
+
+static int __init proc_thermal_init(void)
+{
+	int ret;
+
+	ret = platform_driver_register(&int3401_driver);
+	if (ret)
+		return ret;
+
+	ret = pci_register_driver(&proc_thermal_pci_driver);
+
+	return ret;
+}
+
+static void __exit proc_thermal_exit(void)
+{
+	platform_driver_unregister(&int3401_driver);
+	pci_unregister_driver(&proc_thermal_pci_driver);
+}
+
+module_init(proc_thermal_init);
+module_exit(proc_thermal_exit);
+
+MODULE_AUTHOR("Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>");
+MODULE_DESCRIPTION("Processor Thermal Reporting Device Driver");
+MODULE_LICENSE("GPL v2");

drivers/thermal/intel_powerclamp.c

@@ -688,6 +688,7 @@ static const struct x86_cpu_id intel_powerclamp_ids[] = {
 	{ X86_VENDOR_INTEL, 6, 0x45},
 	{ X86_VENDOR_INTEL, 6, 0x46},
 	{ X86_VENDOR_INTEL, 6, 0x4c},
+	{ X86_VENDOR_INTEL, 6, 0x56},
 	{}
 };
 MODULE_DEVICE_TABLE(x86cpu, intel_powerclamp_ids);

drivers/thermal/rockchip_thermal.c

@@ -677,7 +677,6 @@ static SIMPLE_DEV_PM_OPS(rockchip_thermal_pm_ops,
 static struct platform_driver rockchip_thermal_driver = {
 	.driver = {
 		.name = "rockchip-thermal",
-		.owner = THIS_MODULE,
 		.pm = &rockchip_thermal_pm_ops,
 		.of_match_table = of_rockchip_thermal_match,
 	},

drivers/thermal/samsung/Kconfig

@@ -1,6 +1,6 @@
 config EXYNOS_THERMAL
 	tristate "Exynos thermal management unit driver"
-	depends on ARCH_HAS_BANDGAP && OF
+	depends on OF
 	help
 	  If you say yes here you get support for the TMU (Thermal Management
 	  Unit) driver for SAMSUNG EXYNOS series of SoCs. This driver initialises

drivers/thermal/samsung/exynos_thermal_common.c

@@ -347,7 +347,6 @@ void exynos_report_trigger(struct thermal_sensor_conf *conf)
 int exynos_register_thermal(struct thermal_sensor_conf *sensor_conf)
 {
 	int ret;
-	struct cpumask mask_val;
 	struct exynos_thermal_zone *th_zone;
 
 	if (!sensor_conf || !sensor_conf->read_temperature) {
@@ -367,13 +366,14 @@ int exynos_register_thermal(struct thermal_sensor_conf *sensor_conf)
 	 *	 sensor
 	 */
 	if (sensor_conf->cooling_data.freq_clip_count > 0) {
-		cpumask_set_cpu(0, &mask_val);
 		th_zone->cool_dev[th_zone->cool_dev_size] =
-					cpufreq_cooling_register(&mask_val);
+				cpufreq_cooling_register(cpu_present_mask);
 		if (IS_ERR(th_zone->cool_dev[th_zone->cool_dev_size])) {
-			dev_err(sensor_conf->dev,
-				"Failed to register cpufreq cooling device\n");
-			ret = -EINVAL;
+			ret = PTR_ERR(th_zone->cool_dev[th_zone->cool_dev_size]);
+			if (ret != -EPROBE_DEFER)
+				dev_err(sensor_conf->dev,
+					"Failed to register cpufreq cooling device: %d\n",
+					ret);
 			goto err_unregister;
 		}
 		th_zone->cool_dev_size++;

drivers/thermal/samsung/exynos_tmu.c

@@ -927,7 +927,10 @@ static int exynos_tmu_probe(struct platform_device *pdev)
 	/* Register the sensor with thermal management interface */
 	ret = exynos_register_thermal(sensor_conf);
 	if (ret) {
-		dev_err(&pdev->dev, "Failed to register thermal interface\n");
+		if (ret != -EPROBE_DEFER)
+			dev_err(&pdev->dev,
+				"Failed to register thermal interface: %d\n",
+				ret);
 		goto err_clk;
 	}
 	data->reg_conf = sensor_conf;

drivers/thermal/thermal_core.c

@@ -930,7 +930,7 @@ int thermal_zone_bind_cooling_device(struct thermal_zone_device *tz,
 	struct thermal_zone_device *pos1;
 	struct thermal_cooling_device *pos2;
 	unsigned long max_state;
-	int result;
+	int result, ret;
 
 	if (trip >= tz->trips || (trip < 0 && trip != THERMAL_TRIPS_NONE))
 		return -EINVAL;
@@ -947,7 +947,9 @@ int thermal_zone_bind_cooling_device(struct thermal_zone_device *tz,
 	if (tz != pos1 || cdev != pos2)
 		return -EINVAL;
 
-	cdev->ops->get_max_state(cdev, &max_state);
+	ret = cdev->ops->get_max_state(cdev, &max_state);
+	if (ret)
+		return ret;
 
 	/* lower default 0, upper default max_state */
 	lower = lower == THERMAL_NO_LIMIT ? 0 : lower;

drivers/thermal/ti-soc-thermal/ti-thermal-common.c

@@ -28,7 +28,6 @@
 #include <linux/kernel.h>
 #include <linux/workqueue.h>
 #include <linux/thermal.h>
-#include <linux/cpufreq.h>
 #include <linux/cpumask.h>
 #include <linux/cpu_cooling.h>
 #include <linux/of.h>
@@ -407,17 +406,17 @@ int ti_thermal_register_cpu_cooling(struct ti_bandgap *bgp, int id)
 	if (!data)
 		return -EINVAL;
 
-	if (!cpufreq_get_current_driver()) {
-		dev_dbg(bgp->dev, "no cpufreq driver yet\n");
-		return -EPROBE_DEFER;
-	}
-
 	/* Register cooling device */
 	data->cool_dev = cpufreq_cooling_register(cpu_present_mask);
 	if (IS_ERR(data->cool_dev)) {
-		dev_err(bgp->dev,
-			"Failed to register cpufreq cooling device\n");
-		return PTR_ERR(data->cool_dev);
+		int ret = PTR_ERR(data->cool_dev);
+
+		if (ret != -EPROBE_DEFER)
+			dev_err(bgp->dev,
+				"Failed to register cpu cooling device %d\n",
+				ret);
+
+		return ret;
 	}
 	ti_bandgap_set_sensor_data(bgp, id, data);
 

include/dt-bindings/thermal/thermal.h

@@ -11,7 +11,7 @@
 #define _DT_BINDINGS_THERMAL_THERMAL_H
 
 /* On cooling devices upper and lower limits */
-#define THERMAL_NO_LIMIT		(-1UL)
+#define THERMAL_NO_LIMIT		(~0)
 
 #endif
 

include/linux/cpu_cooling.h

@@ -50,7 +50,7 @@ static inline struct thermal_cooling_device *
 of_cpufreq_cooling_register(struct device_node *np,
 			    const struct cpumask *clip_cpus)
 {
-	return NULL;
+	return ERR_PTR(-ENOSYS);
 }
 #endif
 
@@ -65,13 +65,13 @@ unsigned long cpufreq_cooling_get_level(unsigned int cpu, unsigned int freq);
 static inline struct thermal_cooling_device *
 cpufreq_cooling_register(const struct cpumask *clip_cpus)
 {
-	return NULL;
+	return ERR_PTR(-ENOSYS);
 }
 static inline struct thermal_cooling_device *
 of_cpufreq_cooling_register(struct device_node *np,
 			    const struct cpumask *clip_cpus)
 {
-	return NULL;
+	return ERR_PTR(-ENOSYS);
 }
 static inline
 void cpufreq_cooling_unregister(struct thermal_cooling_device *cdev)

include/linux/thermal.h

@@ -38,7 +38,7 @@
 #define THERMAL_CSTATE_INVALID -1UL
 
 /* No upper/lower limit requirement */
-#define THERMAL_NO_LIMIT	THERMAL_CSTATE_INVALID
+#define THERMAL_NO_LIMIT	((u32)~0)
 
 /* Unit conversion macros */
 #define KELVIN_TO_CELSIUS(t)	(long)(((long)t-2732 >= 0) ?	\