net: qcom/emac: clean up some TX/RX error messages

Some of the error messages that are printed by the interrupt handlers
are poorly written.  For example, many don't include a device prefix,
so there's no indication that they are EMAC errors.

Also use rate limiting for all messages that could be printed from
interrupt context.

Signed-off-by: Timur Tabi <timur@codeaurora.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

drivers/net/ethernet/qualcomm/emac/emac-sgmii.c

@@ -68,10 +68,10 @@ static void emac_sgmii_link_init(struct emac_adapter *adpt)
 	writel(val, phy->base + EMAC_SGMII_PHY_AUTONEG_CFG2);
 }
 
-static int emac_sgmii_irq_clear(struct emac_adapter *adpt, u32 irq_bits)
+static int emac_sgmii_irq_clear(struct emac_adapter *adpt, u8 irq_bits)
 {
 	struct emac_sgmii *phy = &adpt->phy;
-	u32 status;
+	u8 status;
 
 	writel_relaxed(irq_bits, phy->base + EMAC_SGMII_PHY_INTERRUPT_CLEAR);
 	writel_relaxed(IRQ_GLOBAL_CLEAR, phy->base + EMAC_SGMII_PHY_IRQ_CMD);
@@ -86,9 +86,8 @@ static int emac_sgmii_irq_clear(struct emac_adapter *adpt, u32 irq_bits)
 				      EMAC_SGMII_PHY_INTERRUPT_STATUS,
 				      status, !(status & irq_bits), 1,
 				      SGMII_PHY_IRQ_CLR_WAIT_TIME)) {
-		netdev_err(adpt->netdev,
-			   "error: failed clear SGMII irq: status:0x%x bits:0x%x\n",
-			   status, irq_bits);
+		net_err_ratelimited("%s: failed to clear SGMII irq: status:0x%x bits:0x%x\n",
+				    adpt->netdev->name, status, irq_bits);
 		return -EIO;
 	}
 
@@ -109,7 +108,7 @@ static irqreturn_t emac_sgmii_interrupt(int irq, void *data)
 {
 	struct emac_adapter *adpt = data;
 	struct emac_sgmii *phy = &adpt->phy;
-	u32 status;
+	u8 status;
 
 	status = readl(phy->base + EMAC_SGMII_PHY_INTERRUPT_STATUS);
 	status &= SGMII_ISR_MASK;
@@ -139,10 +138,8 @@ static irqreturn_t emac_sgmii_interrupt(int irq, void *data)
 		atomic_set(&phy->decode_error_count, 0);
 	}
 
-	if (emac_sgmii_irq_clear(adpt, status)) {
-		netdev_warn(adpt->netdev, "failed to clear SGMII interrupt\n");
+	if (emac_sgmii_irq_clear(adpt, status))
 		schedule_work(&adpt->work_thread);
-	}
 
 	return IRQ_HANDLED;
 }

drivers/net/ethernet/qualcomm/emac/emac.c

@@ -148,9 +148,8 @@ static irqreturn_t emac_isr(int _irq, void *data)
 		goto exit;
 
 	if (status & ISR_ERROR) {
-		netif_warn(adpt,  intr, adpt->netdev,
-			   "warning: error irq status 0x%lx\n",
-			   status & ISR_ERROR);
+		net_err_ratelimited("%s: error interrupt 0x%lx\n",
+				    adpt->netdev->name, status & ISR_ERROR);
 		/* reset MAC */
 		schedule_work(&adpt->work_thread);
 	}
@@ -169,7 +168,8 @@ static irqreturn_t emac_isr(int _irq, void *data)
 		emac_mac_tx_process(adpt, &adpt->tx_q);
 
 	if (status & ISR_OVER)
-		net_warn_ratelimited("warning: TX/RX overflow\n");
+		net_warn_ratelimited("%s: TX/RX overflow interrupt\n",
+				     adpt->netdev->name);
 
 exit:
 	/* enable the interrupt */