mn10300: Remove the architecture

Remove the MN10300 arch as the hardware is defunct.

Suggested-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Masahiro Yamada <yamada.masahiro@socionext.com>
cc: linux-am33-list@redhat.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

Documentation/00-INDEX

@@ -284,8 +284,6 @@ misc-devices/
 	- directory with info about devices using the misc dev subsystem
 mmc/
 	- directory with info about the MMC subsystem
-mn10300/
-	- directory with info about the mn10300 architecture port
 mtd/
 	- directory with info about memory technology devices (flash)
 namespaces/

Documentation/features/core/BPF-JIT/arch-support.txt

@@ -21,7 +21,6 @@
     |        m68k: | TODO |
     |  microblaze: | TODO |
     |        mips: |  ok  |
-    |     mn10300: | TODO |
     |       nios2: | TODO |
     |    openrisc: | TODO |
     |      parisc: | TODO |

Documentation/features/core/generic-idle-thread/arch-support.txt

@@ -21,7 +21,6 @@
     |        m68k: | TODO |
     |  microblaze: | TODO |
     |        mips: |  ok  |
-    |     mn10300: | TODO |
     |       nios2: | TODO |
     |    openrisc: | TODO |
     |      parisc: |  ok  |

Documentation/features/core/jump-labels/arch-support.txt

@@ -21,7 +21,6 @@
     |        m68k: | TODO |
     |  microblaze: | TODO |
     |        mips: |  ok  |
-    |     mn10300: | TODO |
     |       nios2: | TODO |
     |    openrisc: | TODO |
     |      parisc: | TODO |

Documentation/features/core/tracehook/arch-support.txt

@@ -21,7 +21,6 @@
     |        m68k: | TODO |
     |  microblaze: | TODO |
     |        mips: |  ok  |
-    |     mn10300: |  ok  |
     |       nios2: |  ok  |
     |    openrisc: |  ok  |
     |      parisc: |  ok  |

Documentation/features/debug/KASAN/arch-support.txt

@@ -21,7 +21,6 @@
     |        m68k: | TODO |
     |  microblaze: | TODO |
     |        mips: | TODO |
-    |     mn10300: | TODO |
     |       nios2: | TODO |
     |    openrisc: | TODO |
     |      parisc: | TODO |

Documentation/features/debug/gcov-profile-all/arch-support.txt

@@ -21,7 +21,6 @@
     |        m68k: | TODO |
     |  microblaze: |  ok  |
     |        mips: | TODO |
-    |     mn10300: | TODO |
     |       nios2: | TODO |
     |    openrisc: | TODO |
     |      parisc: | TODO |

Documentation/features/debug/kgdb/arch-support.txt

@@ -21,7 +21,6 @@
     |        m68k: | TODO |
     |  microblaze: |  ok  |
     |        mips: |  ok  |
-    |     mn10300: |  ok  |
     |       nios2: |  ok  |
     |    openrisc: | TODO |
     |      parisc: | TODO |

Documentation/features/debug/kprobes-on-ftrace/arch-support.txt

@@ -21,7 +21,6 @@
     |        m68k: | TODO |
     |  microblaze: | TODO |
     |        mips: | TODO |
-    |     mn10300: | TODO |
     |       nios2: | TODO |
     |    openrisc: | TODO |
     |      parisc: | TODO |

Documentation/features/debug/kprobes/arch-support.txt

@@ -21,7 +21,6 @@
     |        m68k: | TODO |
     |  microblaze: | TODO |
     |        mips: |  ok  |
-    |     mn10300: | TODO |
     |       nios2: | TODO |
     |    openrisc: | TODO |
     |      parisc: | TODO |

Documentation/features/debug/kretprobes/arch-support.txt

@@ -21,7 +21,6 @@
     |        m68k: | TODO |
     |  microblaze: | TODO |
     |        mips: |  ok  |
-    |     mn10300: | TODO |
     |       nios2: | TODO |
     |    openrisc: | TODO |
     |      parisc: | TODO |

Documentation/features/debug/optprobes/arch-support.txt

@@ -21,7 +21,6 @@
     |        m68k: | TODO |
     |  microblaze: | TODO |
     |        mips: | TODO |
-    |     mn10300: | TODO |
     |       nios2: | TODO |
     |    openrisc: | TODO |
     |      parisc: | TODO |

Documentation/features/debug/stackprotector/arch-support.txt

@@ -21,7 +21,6 @@
     |        m68k: | TODO |
     |  microblaze: | TODO |
     |        mips: |  ok  |
-    |     mn10300: | TODO |
     |       nios2: | TODO |
     |    openrisc: | TODO |
     |      parisc: | TODO |

Documentation/features/debug/uprobes/arch-support.txt

@@ -21,7 +21,6 @@
     |        m68k: | TODO |
     |  microblaze: | TODO |
     |        mips: |  ok  |
-    |     mn10300: | TODO |
     |       nios2: | TODO |
     |    openrisc: | TODO |
     |      parisc: | TODO |

Documentation/features/debug/user-ret-profiler/arch-support.txt

@@ -21,7 +21,6 @@
     |        m68k: | TODO |
     |  microblaze: | TODO |
     |        mips: | TODO |
-    |     mn10300: | TODO |
     |       nios2: | TODO |
     |    openrisc: | TODO |
     |      parisc: | TODO |

Documentation/features/io/dma-api-debug/arch-support.txt

@@ -21,7 +21,6 @@
     |        m68k: | TODO |
     |  microblaze: |  ok  |
     |        mips: |  ok  |
-    |     mn10300: | TODO |
     |       nios2: | TODO |
     |    openrisc: | TODO |
     |      parisc: | TODO |

Documentation/features/io/dma-contiguous/arch-support.txt

@@ -21,7 +21,6 @@
     |        m68k: | TODO |
     |  microblaze: | TODO |
     |        mips: |  ok  |
-    |     mn10300: | TODO |
     |       nios2: | TODO |
     |    openrisc: | TODO |
     |      parisc: | TODO |

Documentation/features/io/sg-chain/arch-support.txt

@@ -21,7 +21,6 @@
     |        m68k: | TODO |
     |  microblaze: | TODO |
     |        mips: | TODO |
-    |     mn10300: | TODO |
     |       nios2: | TODO |
     |    openrisc: | TODO |
     |      parisc: | TODO |

Documentation/features/lib/strncasecmp/arch-support.txt

@@ -21,7 +21,6 @@
     |        m68k: | TODO |
     |  microblaze: | TODO |
     |        mips: | TODO |
-    |     mn10300: | TODO |
     |       nios2: | TODO |
     |    openrisc: | TODO |
     |      parisc: | TODO |

Documentation/features/locking/cmpxchg-local/arch-support.txt

@@ -21,7 +21,6 @@
     |        m68k: | TODO |
     |  microblaze: | TODO |
     |        mips: | TODO |
-    |     mn10300: | TODO |
     |       nios2: | TODO |
     |    openrisc: | TODO |
     |      parisc: | TODO |

Documentation/features/locking/lockdep/arch-support.txt

@@ -21,7 +21,6 @@
     |        m68k: | TODO |
     |  microblaze: |  ok  |
     |        mips: |  ok  |
-    |     mn10300: | TODO |
     |       nios2: | TODO |
     |    openrisc: | TODO |
     |      parisc: | TODO |

Documentation/features/locking/queued-rwlocks/arch-support.txt

@@ -21,7 +21,6 @@
     |        m68k: | TODO |
     |  microblaze: | TODO |
     |        mips: | TODO |
-    |     mn10300: | TODO |
     |       nios2: | TODO |
     |    openrisc: | TODO |
     |      parisc: | TODO |

Documentation/features/locking/queued-spinlocks/arch-support.txt

@@ -21,7 +21,6 @@
     |        m68k: | TODO |
     |  microblaze: | TODO |
     |        mips: | TODO |
-    |     mn10300: | TODO |
     |       nios2: | TODO |
     |    openrisc: | TODO |
     |      parisc: | TODO |

Documentation/features/locking/rwsem-optimized/arch-support.txt

@@ -21,7 +21,6 @@
     |        m68k: | TODO |
     |  microblaze: | TODO |
     |        mips: | TODO |
-    |     mn10300: | TODO |
     |       nios2: | TODO |
     |    openrisc: | TODO |
     |      parisc: | TODO |

Documentation/features/perf/kprobes-event/arch-support.txt

@@ -21,7 +21,6 @@
     |        m68k: | TODO |
     |  microblaze: | TODO |
     |        mips: |  ok  |
-    |     mn10300: | TODO |
     |       nios2: | TODO |
     |    openrisc: | TODO |
     |      parisc: | TODO |

Documentation/features/perf/perf-regs/arch-support.txt

@@ -21,7 +21,6 @@
     |        m68k: | TODO |
     |  microblaze: | TODO |
     |        mips: | TODO |
-    |     mn10300: | TODO |
     |       nios2: | TODO |
     |    openrisc: | TODO |
     |      parisc: | TODO |

Documentation/features/perf/perf-stackdump/arch-support.txt

@@ -21,7 +21,6 @@
     |        m68k: | TODO |
     |  microblaze: | TODO |
     |        mips: | TODO |
-    |     mn10300: | TODO |
     |       nios2: | TODO |
     |    openrisc: | TODO |
     |      parisc: | TODO |

Documentation/features/sched/membarrier-sync-core/arch-support.txt

@@ -44,7 +44,6 @@
     |        m68k: | TODO |
     |  microblaze: | TODO |
     |        mips: | TODO |
-    |     mn10300: | TODO |
     |       nios2: | TODO |
     |    openrisc: | TODO |
     |      parisc: | TODO |

Documentation/features/sched/numa-balancing/arch-support.txt

@@ -21,7 +21,6 @@
     |        m68k: |  ..  |
     |  microblaze: |  ..  |
     |        mips: | TODO |
-    |     mn10300: |  ..  |
     |       nios2: |  ..  |
     |    openrisc: |  ..  |
     |      parisc: |  ..  |

Documentation/features/seccomp/seccomp-filter/arch-support.txt

@@ -21,7 +21,6 @@
     |        m68k: | TODO |
     |  microblaze: | TODO |
     |        mips: |  ok  |
-    |     mn10300: | TODO |
     |       nios2: | TODO |
     |    openrisc: | TODO |
     |      parisc: | TODO |

Documentation/features/time/arch-tick-broadcast/arch-support.txt

@@ -21,7 +21,6 @@
     |        m68k: | TODO |
     |  microblaze: | TODO |
     |        mips: |  ok  |
-    |     mn10300: | TODO |
     |       nios2: | TODO |
     |    openrisc: | TODO |
     |      parisc: | TODO |

Documentation/features/time/clockevents/arch-support.txt

@@ -21,7 +21,6 @@
     |        m68k: |  ok  |
     |  microblaze: |  ok  |
     |        mips: |  ok  |
-    |     mn10300: |  ok  |
     |       nios2: |  ok  |
     |    openrisc: |  ok  |
     |      parisc: | TODO |

Documentation/features/time/context-tracking/arch-support.txt

@@ -21,7 +21,6 @@
     |        m68k: | TODO |
     |  microblaze: | TODO |
     |        mips: |  ok  |
-    |     mn10300: | TODO |
     |       nios2: | TODO |
     |    openrisc: | TODO |
     |      parisc: | TODO |

Documentation/features/time/irq-time-acct/arch-support.txt

@@ -21,7 +21,6 @@
     |        m68k: | TODO |
     |  microblaze: | TODO |
     |        mips: |  ok  |
-    |     mn10300: | TODO |
     |       nios2: | TODO |
     |    openrisc: | TODO |
     |      parisc: |  ..  |

Documentation/features/time/modern-timekeeping/arch-support.txt

@@ -21,7 +21,6 @@
     |        m68k: | TODO |
     |  microblaze: |  ok  |
     |        mips: |  ok  |
-    |     mn10300: |  ok  |
     |       nios2: |  ok  |
     |    openrisc: |  ok  |
     |      parisc: |  ok  |

Documentation/features/time/virt-cpuacct/arch-support.txt

@@ -21,7 +21,6 @@
     |        m68k: | TODO |
     |  microblaze: | TODO |
     |        mips: |  ok  |
-    |     mn10300: | TODO |
     |       nios2: | TODO |
     |    openrisc: | TODO |
     |      parisc: |  ok  |

Documentation/features/vm/ELF-ASLR/arch-support.txt

@@ -21,7 +21,6 @@
     |        m68k: | TODO |
     |  microblaze: | TODO |
     |        mips: |  ok  |
-    |     mn10300: | TODO |
     |       nios2: | TODO |
     |    openrisc: | TODO |
     |      parisc: | TODO |

Documentation/features/vm/PG_uncached/arch-support.txt

@@ -21,7 +21,6 @@
     |        m68k: | TODO |
     |  microblaze: | TODO |
     |        mips: | TODO |
-    |     mn10300: | TODO |
     |       nios2: | TODO |
     |    openrisc: | TODO |
     |      parisc: | TODO |

Documentation/features/vm/THP/arch-support.txt

@@ -21,7 +21,6 @@
     |        m68k: |  ..  |
     |  microblaze: |  ..  |
     |        mips: |  ok  |
-    |     mn10300: |  ..  |
     |       nios2: |  ..  |
     |    openrisc: |  ..  |
     |      parisc: | TODO |

Documentation/features/vm/TLB/arch-support.txt

@@ -21,7 +21,6 @@
     |        m68k: |  ..  |
     |  microblaze: |  ..  |
     |        mips: | TODO |
-    |     mn10300: | TODO |
     |       nios2: |  ..  |
     |    openrisc: |  ..  |
     |      parisc: | TODO |

Documentation/features/vm/huge-vmap/arch-support.txt

@@ -21,7 +21,6 @@
     |        m68k: | TODO |
     |  microblaze: | TODO |
     |        mips: | TODO |
-    |     mn10300: | TODO |
     |       nios2: | TODO |
     |    openrisc: | TODO |
     |      parisc: | TODO |

Documentation/features/vm/ioremap_prot/arch-support.txt

@@ -21,7 +21,6 @@
     |        m68k: | TODO |
     |  microblaze: | TODO |
     |        mips: | TODO |
-    |     mn10300: | TODO |
     |       nios2: | TODO |
     |    openrisc: | TODO |
     |      parisc: | TODO |

Documentation/features/vm/numa-memblock/arch-support.txt

@@ -21,7 +21,6 @@
     |        m68k: |  ..  |
     |  microblaze: |  ok  |
     |        mips: |  ok  |
-    |     mn10300: | TODO |
     |       nios2: |  ..  |
     |    openrisc: |  ..  |
     |      parisc: |  ..  |

Documentation/features/vm/pte_special/arch-support.txt

@@ -21,7 +21,6 @@
     |        m68k: | TODO |
     |  microblaze: | TODO |
     |        mips: | TODO |
-    |     mn10300: | TODO |
     |       nios2: | TODO |
     |    openrisc: | TODO |
     |      parisc: | TODO |

Documentation/mn10300/ABI.txt

@@ -1,149 +0,0 @@
-			   =========================
-			   MN10300 FUNCTION CALL ABI
-			   =========================
-
-=======
-GENERAL
-=======
-
-The MN10300/AM33 kernel runs in little-endian mode; big-endian mode is not
-supported.
-
-The stack grows downwards, and should always be 32-bit aligned. There are
-separate stack pointer registers for userspace and the kernel.
-
-
-================
-ARGUMENT PASSING
-================
-
-The first two arguments (assuming up to 32-bits per argument) to a function are
-passed in the D0 and D1 registers respectively; all other arguments are passed
-on the stack.
-
-If 64-bit arguments are being passed, then they are never split between
-registers and the stack. If the first argument is a 64-bit value, it will be
-passed in D0:D1. If the first argument is not a 64-bit value, but the second
-is, the second will be passed entirely on the stack and D1 will be unused.
-
-Arguments smaller than 32-bits are not coalesced within a register or a stack
-word. For example, two byte-sized arguments will always be passed in separate
-registers or word-sized stack slots.
-
-
-=================
-CALLING FUNCTIONS
-=================
-
-The caller must allocate twelve bytes on the stack for the callee's use before
-it inserts a CALL instruction. The CALL instruction will write into the TOS
-word, but won't actually modify the stack pointer; similarly, the RET
-instruction reads from the TOS word of the stack, but doesn't move the stack
-pointer beyond it.
-
-
-	Stack:
-	|		|
-	|		|
-	|---------------| SP+20
-	| 4th Arg	|
-	|---------------| SP+16
-	| 3rd Arg	|
-	|---------------| SP+12
-	| D1 Save Slot	|
-	|---------------| SP+8
-	| D0 Save Slot	|
-	|---------------| SP+4
-	| Return Addr	|
-	|---------------| SP
-	|		|
-	|		|
-
-
-The caller must leave space on the stack (hence an allocation of twelve bytes)
-in which the callee may store the first two arguments.
-
-
-============
-RETURN VALUE
-============
-
-The return value is passed in D0 for an integer (or D0:D1 for a 64-bit value),
-or A0 for a pointer.
-
-If the return value is a value larger than 64-bits, or is a structure or an
-array, then a hidden first argument will be passed to the callee by the caller:
-this will point to a piece of memory large enough to hold the result of the
-function. In this case, the callee will return the value in that piece of
-memory, and no value will be returned in D0 or A0.
-
-
-===================
-REGISTER CLOBBERING
-===================
-
-The values in certain registers may be clobbered by the callee, and other
-values must be saved:
-
-	Clobber:	D0-D1, A0-A1, E0-E3
-	Save:		D2-D3, A2-A3, E4-E7, SP
-
-All other non-supervisor-only registers are clobberable (such as MDR, MCRL,
-MCRH).
-
-
-=================
-SPECIAL REGISTERS
-=================
-
-Certain ordinary registers may carry special usage for the compiler:
-
-	A3:	Frame pointer
-	E2:	TLS pointer
-
-
-==========
-KERNEL ABI
-==========
-
-The kernel may use a slightly different ABI internally.
-
- (*) E2
-
-     If CONFIG_MN10300_CURRENT_IN_E2 is defined, then the current task pointer
-     will be kept in the E2 register, and that register will be marked
-     unavailable for the compiler to use as a scratch register.
-
-     Normally the kernel uses something like:
-
-	MOV	SP,An
-	AND	0xFFFFE000,An
-	MOV	(An),Rm		// Rm holds current
-	MOV	(yyy,Rm)	// Access current->yyy
-
-     To find the address of current; but since this option permits current to
-     be carried globally in an register, it can use:
-
-	MOV	(yyy,E2)	// Access current->yyy
-
-     instead.
-
-
-===============
-SYSTEM CALL ABI
-===============
-
-System calls are called with the following convention:
-
-	REGISTER	ENTRY			EXIT
-	===============	=======================	=======================
-	D0		Syscall number		Return value
-	A0		1st syscall argument	Saved
-	D1		2nd syscall argument	Saved
-	A3		3rd syscall argument	Saved
-	A2		4th syscall argument	Saved
-	D3		5th syscall argument	Saved
-	D2		6th syscall argument	Saved
-
-All other registers are saved.  The layout is a consequence of the way the MOVM
-instruction stores registers onto the stack.

Documentation/mn10300/compartmentalisation.txt

@@ -1,60 +0,0 @@
-		   =========================================
-		   PART-SPECIFIC SOURCE COMPARTMENTALISATION
-		   =========================================
-
-The sources for various parts are compartmentalised at two different levels:
-
- (1) Processor level
-
-     The "processor level" is a CPU core plus the other on-silicon
-     peripherals.
-
-     Processor-specific header files are divided among directories in a similar
-     way to the CPU level:
-
-	(*) include/asm-mn10300/proc-mn103e010/
-
-	    Support for the AM33v2 CPU core.
-
-     The appropriate processor is selected by a CONFIG_MN10300_PROC_YYYY option
-     from the "Processor support" choice menu in the arch/mn10300/Kconfig file.
-
-
- (2) Unit level
-
-     The "unit level" is a processor plus all the external peripherals
-     controlled by that processor.
-
-     Unit-specific header files are divided among directories in a similar way
-     to the CPU level; not only that, but specific sources may also be
-     segregated into separate directories under the arch directory:
-
-	(*) include/asm-mn10300/unit-asb2303/
-	(*) arch/mn10300/unit-asb2303/
-
-	    Support for the ASB2303 board with an ASB2308 daughter board.
-
-	(*) include/asm-mn10300/unit-asb2305/
-	(*) arch/mn10300/unit-asb2305/
-
-	    Support for the ASB2305 board.
-
-     The appropriate processor is selected by a CONFIG_MN10300_UNIT_ZZZZ option
-     from the "Unit type" choice menu in the arch/mn10300/Kconfig file.
-
-
-============
-COMPILE TIME
-============
-
-When the kernel is compiled, symbolic links will be made in the asm header file
-directory for this arch:
-
-	include/asm-mn10300/proc => include/asm-mn10300/proc-YYYY/
-	include/asm-mn10300/unit => include/asm-mn10300/unit-ZZZZ/
-
-So that the header files contained in those directories can be accessed without
-lots of #ifdef-age.
-
-The appropriate arch/mn10300/unit-ZZZZ directory will also be entered by the
-compilation process; all other unit-specific directories will be ignored.

MAINTAINERS

@@ -10394,14 +10394,6 @@ L:	platform-driver-x86@vger.kernel.org
 S:	Maintained
 F:	drivers/platform/x86/panasonic-laptop.c
 
-PANASONIC MN10300/AM33/AM34 PORT
-M:	David Howells <dhowells@redhat.com>
-L:	linux-am33-list@redhat.com (moderated for non-subscribers)
-W:	ftp://ftp.redhat.com/pub/redhat/gnupro/AM33/
-S:	Maintained
-F:	Documentation/mn10300/
-F:	arch/mn10300/
-
 PARALLEL LCD/KEYPAD PANEL DRIVER
 M:	Willy Tarreau <willy@haproxy.com>
 M:	Ksenija Stanojevic <ksenija.stanojevic@gmail.com>

arch/mn10300/Kconfig

@@ -1,499 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0
-config MN10300
-	def_bool y
-	select HAVE_EXIT_THREAD
-	select HAVE_OPROFILE
-	select HAVE_UID16
-	select GENERIC_IRQ_SHOW
-	select ARCH_WANT_IPC_PARSE_VERSION
-	select HAVE_ARCH_TRACEHOOK
-	select HAVE_ARCH_KGDB
-	select GENERIC_ATOMIC64
-	select HAVE_NMI_WATCHDOG if MN10300_WD_TIMER
-	select VIRT_TO_BUS
-	select GENERIC_CLOCKEVENTS
-	select MODULES_USE_ELF_RELA
-	select OLD_SIGSUSPEND3
-	select OLD_SIGACTION
-	select HAVE_DEBUG_STACKOVERFLOW
-	select ARCH_NO_COHERENT_DMA_MMAP
-
-config AM33_2
-	def_bool n
-
-config AM33_3
-	def_bool n
-
-config AM34_2
-	def_bool n
-	select MN10300_HAS_ATOMIC_OPS_UNIT
-	select MN10300_HAS_CACHE_SNOOP
-
-config ERRATUM_NEED_TO_RELOAD_MMUCTR
-	def_bool y if AM33_3 || AM34_2
-
-config MMU
-	def_bool y
-
-config HIGHMEM
-	def_bool n
-
-config NUMA
-	def_bool n
-
-config RWSEM_GENERIC_SPINLOCK
-	def_bool y
-
-config RWSEM_XCHGADD_ALGORITHM
-	bool
-
-config GENERIC_CALIBRATE_DELAY
-	def_bool y
-
-config GENERIC_HWEIGHT
-	def_bool y
-
-config GENERIC_BUG
-	def_bool y
-	depends on BUG
-
-config QUICKLIST
-	def_bool y
-
-config ARCH_HAS_ILOG2_U32
-	def_bool y
-
-config HOTPLUG_CPU
-	def_bool n
-
-source "init/Kconfig"
-
-source "kernel/Kconfig.freezer"
-
-
-menu "Panasonic MN10300 system setup"
-
-choice
-	prompt "Unit type"
-	default MN10300_UNIT_ASB2303
-	help
-	  This option specifies board for which the kernel will be
-	  compiled. It affects the external peripherals catered for.
-
-config MN10300_UNIT_ASB2303
-	bool "ASB2303"
-
-config MN10300_UNIT_ASB2305
-	bool "ASB2305"
-
-config MN10300_UNIT_ASB2364
-	bool "ASB2364"
-	select SMSC911X_ARCH_HOOKS if SMSC911X
-
-endchoice
-
-choice
-	prompt "Processor support"
-	default MN10300_PROC_MN103E010
-	help
-	  This option specifies the processor for which the kernel will be
-	  compiled. It affects the on-chip peripherals catered for.
-
-config MN10300_PROC_MN103E010
-	bool "MN103E010"
-	depends on MN10300_UNIT_ASB2303 || MN10300_UNIT_ASB2305
-	select AM33_2
-	select MN10300_PROC_HAS_TTYSM0
-	select MN10300_PROC_HAS_TTYSM1
-	select MN10300_PROC_HAS_TTYSM2
-
-config MN10300_PROC_MN2WS0050
-	bool "MN2WS0050"
-	depends on MN10300_UNIT_ASB2364
-	select AM34_2
-	select MN10300_PROC_HAS_TTYSM0
-	select MN10300_PROC_HAS_TTYSM1
-	select MN10300_PROC_HAS_TTYSM2
-
-endchoice
-
-config MN10300_HAS_ATOMIC_OPS_UNIT
-	def_bool n
-	help
-	  This should be enabled if the processor has an atomic ops unit
-	  capable of doing LL/SC equivalent operations.
-
-config FPU
-	bool "FPU present"
-	default y
-	depends on MN10300_PROC_MN103E010 || MN10300_PROC_MN2WS0050
-
-config LAZY_SAVE_FPU
-	bool "Save FPU state lazily"
-	default y
-	depends on FPU && !SMP
-	help
-	  Enable this to be lazy in the saving of the FPU state to the owning
-	  task's thread struct.  This is useful if most tasks on the system
-	  don't use the FPU as only those tasks that use it will pass it
-	  between them, and the state needn't be saved for a task that isn't
-	  using it.
-
-	  This can't be so easily used on SMP as the process that owns the FPU
-	  state on a CPU may be currently running on another CPU, so for the
-	  moment, it is disabled.
-
-source "arch/mn10300/mm/Kconfig.cache"
-
-config MN10300_TLB_USE_PIDR
-	def_bool y
-
-menu "Memory layout options"
-
-config KERNEL_RAM_BASE_ADDRESS
-	hex "Base address of kernel RAM"
-	default "0x90000000"
-
-config INTERRUPT_VECTOR_BASE
-	hex "Base address of vector table"
-	default "0x90000000"
-	help
-	  The base address of the vector table will be programmed into
-          the TBR register. It must be on 16MiB address boundary.
-
-config KERNEL_TEXT_ADDRESS
-	hex "Base address of kernel"
-	default "0x90001000"
-
-config KERNEL_ZIMAGE_BASE_ADDRESS
-	hex "Base address of compressed vmlinux image"
-	default "0x50700000"
-
-config BOOT_STACK_OFFSET
-	hex
-	default	"0xF00"	if SMP
-	default	"0xFF0" if !SMP
-
-config BOOT_STACK_SIZE
-	hex
-	depends on SMP
-	default	"0x100"
-endmenu
-
-config SMP
-	bool "Symmetric multi-processing support"
-	default y
-	depends on MN10300_PROC_MN2WS0050
-	---help---
-	  This enables support for systems with more than one CPU. If you have
-	  a system with only one CPU, say N. If you have a system with more
-	  than one CPU, say Y.
-
-	  If you say N here, the kernel will run on uni- and multiprocessor
-	  machines, but will use only one CPU of a multiprocessor machine. If
-	  you say Y here, the kernel will run on many, but not all,
-	  uniprocessor machines. On a uniprocessor machine, the kernel
-	  will run faster if you say N here.
-
-	  See also <file:Documentation/x86/i386/IO-APIC.txt>,
-	  <file:Documentation/nmi_watchdog.txt> and the SMP-HOWTO available at
-	  <http://www.tldp.org/docs.html#howto>.
-
-	  If you don't know what to do here, say N.
-
-config NR_CPUS
-	int
-	depends on SMP
-	default "2"
-
-source "kernel/Kconfig.preempt"
-
-config MN10300_CURRENT_IN_E2
-	bool "Hold current task address in E2 register"
-	depends on !SMP
-	default y
-	help
-	  This option removes the E2/R2 register from the set available to gcc
-	  for normal use and instead uses it to store the address of the
-	  current process's task_struct whilst in the kernel.
-
-	  This means the kernel doesn't need to calculate the address each time
-	  "current" is used (take SP, AND with mask and dereference pointer
-	  just to get the address), and instead can just use E2+offset
-	  addressing each time.
-
-	  This has no effect on userspace.
-
-config MN10300_USING_JTAG
-	bool "Using JTAG to debug kernel"
-	default y
-	help
-	  This options indicates that JTAG will be used to debug the kernel. It
-	  suppresses the use of certain hardware debugging features, such as
-	  single-stepping, which are taken over completely by the JTAG unit.
-
-source "kernel/Kconfig.hz"
-
-config MN10300_RTC
-	bool "Using MN10300 RTC"
-	depends on MN10300_PROC_MN103E010 || MN10300_PROC_MN2WS0050
-	select RTC_CLASS
-	select RTC_DRV_CMOS
-	select RTC_SYSTOHC
-	default n
-	help
-	  This option enables support for the RTC, thus enabling time to be
-	  tracked, even when system is powered down. This is available on-chip
-	  on the MN103E010.
-
-config MN10300_WD_TIMER
-	bool "Using MN10300 watchdog timer"
-	default y
-	help
-	  This options indicates that the watchdog timer will be used.
-
-config PCI
-	bool "Use PCI"
-	depends on MN10300_UNIT_ASB2305
-	default y
-	select GENERIC_PCI_IOMAP
-	help
-	  Some systems (such as the ASB2305) have PCI onboard. If you have one
-	  of these boards and you wish to use the PCI facilities, say Y here.
-
-	  The PCI-HOWTO, available from
-	  <http://www.tldp.org/docs.html#howto>, contains valuable
-	  information about which PCI hardware does work under Linux and which
-	  doesn't.
-
-source "drivers/pci/Kconfig"
-
-source "drivers/pcmcia/Kconfig"
-
-menu "MN10300 internal serial options"
-
-config MN10300_PROC_HAS_TTYSM0
-	bool
-	default n
-
-config MN10300_PROC_HAS_TTYSM1
-	bool
-	default n
-
-config MN10300_PROC_HAS_TTYSM2
-	bool
-	default n
-
-config MN10300_TTYSM
-	bool "Support for ttySM serial ports"
-	depends on MN10300
-	default y
-	select SERIAL_CORE
-	help
-	  This option enables support for the on-chip serial ports that the
-	  MN10300 has available.
-
-config MN10300_TTYSM_CONSOLE
-	bool "Support for console on ttySM serial ports"
-	depends on MN10300_TTYSM
-	select SERIAL_CORE_CONSOLE
-	help
-	  This option enables support for a console on the on-chip serial ports
-	  that the MN10300 has available.
-
-#
-# /dev/ttySM0
-#
-config MN10300_TTYSM0
-	bool "Enable SIF0 (/dev/ttySM0)"
-	depends on MN10300_TTYSM && MN10300_PROC_HAS_TTYSM0
-	help
-	  Enable access to SIF0 through /dev/ttySM0 or gdb-stub
-
-choice
-	prompt "Select the timer to supply the clock for SIF0"
-	default MN10300_TTYSM0_TIMER8
-	depends on MN10300_TTYSM0
-
-config MN10300_TTYSM0_TIMER8
-	bool "Use timer 8 (16-bit)"
-
-config MN10300_TTYSM0_TIMER2
-	bool "Use timer 2 (8-bit)"
-
-endchoice
-
-#
-# /dev/ttySM1
-#
-config MN10300_TTYSM1
-	bool "Enable SIF1 (/dev/ttySM1)"
-	depends on MN10300_TTYSM && MN10300_PROC_HAS_TTYSM1
-	help
-	  Enable access to SIF1 through /dev/ttySM1 or gdb-stub
-
-choice
-	prompt "Select the timer to supply the clock for SIF1"
-	default MN10300_TTYSM1_TIMER12 \
-		if !(AM33_2 || AM33_3)
-	default MN10300_TTYSM1_TIMER9 \
-		if AM33_2 || AM33_3
-	depends on MN10300_TTYSM1
-
-config MN10300_TTYSM1_TIMER12
-	bool "Use timer 12 (16-bit)"
-	depends on !(AM33_2 || AM33_3)
-
-config MN10300_TTYSM1_TIMER9
-	bool "Use timer 9 (16-bit)"
-	depends on AM33_2 || AM33_3
-
-config MN10300_TTYSM1_TIMER3
-	bool "Use timer 3 (8-bit)"
-	depends on AM33_2 || AM33_3
-
-endchoice
-
-#
-# /dev/ttySM2
-#
-config MN10300_TTYSM2
-	bool "Enable SIF2 (/dev/ttySM2)"
-	depends on MN10300_TTYSM && MN10300_PROC_HAS_TTYSM2
-	help
-	  Enable access to SIF2 through /dev/ttySM2 or gdb-stub
-
-choice
-	prompt "Select the timer to supply the clock for SIF2"
-	default MN10300_TTYSM2_TIMER3 \
-		if !(AM33_2 || AM33_3)
-	default MN10300_TTYSM2_TIMER10 \
-		if AM33_2 || AM33_3
-	depends on MN10300_TTYSM2
-
-config MN10300_TTYSM2_TIMER9
-	bool "Use timer 9 (16-bit)"
-	depends on !(AM33_2 || AM33_3)
-
-config MN10300_TTYSM2_TIMER1
-	bool "Use timer 1 (8-bit)"
-	depends on !(AM33_2 || AM33_3)
-
-config MN10300_TTYSM2_TIMER3
-	bool "Use timer 3 (8-bit)"
-	depends on !(AM33_2 || AM33_3)
-
-config MN10300_TTYSM2_TIMER10
-	bool "Use timer 10 (16-bit)"
-	depends on AM33_2 || AM33_3
-
-endchoice
-
-config MN10300_TTYSM2_CTS
-	bool "Enable the use of the CTS line /dev/ttySM2"
-	depends on MN10300_TTYSM2 && AM33_2
-
-endmenu
-
-menu "Interrupt request priority options"
-
-comment "[!] NOTE: A lower number/level indicates a higher priority (0 is highest, 6 is lowest)"
-
-comment "____Non-maskable interrupt levels____"
-comment "The following must be set to a higher priority than local_irq_disable() and on-chip serial"
-
-config DEBUGGER_IRQ_LEVEL
-	int "DEBUGGER interrupt priority"
-	depends on KERNEL_DEBUGGER
-	range 0 1 if LINUX_CLI_LEVEL = 2
-	range 0 2 if LINUX_CLI_LEVEL = 3
-	range 0 3 if LINUX_CLI_LEVEL = 4
-	range 0 4 if LINUX_CLI_LEVEL = 5
-	range 0 5 if LINUX_CLI_LEVEL = 6
-	default 0
-
-comment "The following must be set to a higher priority than local_irq_disable()"
-
-config MN10300_SERIAL_IRQ_LEVEL
-	int "MN10300 on-chip serial interrupt priority"
-	depends on MN10300_TTYSM
-	range 1 1 if LINUX_CLI_LEVEL = 2
-	range 1 2 if LINUX_CLI_LEVEL = 3
-	range 1 3 if LINUX_CLI_LEVEL = 4
-	range 1 4 if LINUX_CLI_LEVEL = 5
-	range 1 5 if LINUX_CLI_LEVEL = 6
-	default 1
-
-comment "-"
-comment "____Maskable interrupt levels____"
-
-config LINUX_CLI_LEVEL
-	int "The highest interrupt priority excluded by local_irq_disable() (2-6)"
-	range 2 6
-	default 2
-	help
-	  local_irq_disable() doesn't actually disable maskable interrupts -
-	  what it does is restrict the levels of interrupt which are permitted
-	  (a lower level indicates a higher priority) by lowering the value in
-	  EPSW.IM from 7.  Any interrupt is permitted for which the level is
-	  lower than EPSW.IM.
-
-	  Certain interrupts, such as DEBUGGER and virtual MN10300 on-chip
-	  serial DMA interrupts are allowed to interrupt normal disabled
-	  sections.
-
-comment "The following must be set to a equal to or lower priority than LINUX_CLI_LEVEL"
-
-config TIMER_IRQ_LEVEL
-	int "Kernel timer interrupt priority"
-	range LINUX_CLI_LEVEL 6
-	default 4
-
-config PCI_IRQ_LEVEL
-	int "PCI interrupt priority"
-	depends on PCI
-	range LINUX_CLI_LEVEL 6
-	default 5
-
-config ETHERNET_IRQ_LEVEL
-	int "Ethernet interrupt priority"
-	depends on SMC91X || SMC911X || SMSC911X
-	range LINUX_CLI_LEVEL 6
-	default 6
-
-config EXT_SERIAL_IRQ_LEVEL
-	int "External serial port interrupt priority"
-	depends on SERIAL_8250
-	range LINUX_CLI_LEVEL 6
-	default 6
-
-endmenu
-
-source "mm/Kconfig"
-
-menu "Power management options"
-source kernel/power/Kconfig
-endmenu
-
-endmenu
-
-
-menu "Executable formats"
-
-source "fs/Kconfig.binfmt"
-
-endmenu
-
-source "net/Kconfig"
-
-source "drivers/Kconfig"
-
-source "fs/Kconfig"
-
-source "arch/mn10300/Kconfig.debug"
-
-source "security/Kconfig"
-
-source "crypto/Kconfig"
-
-source "lib/Kconfig"

arch/mn10300/Kconfig.debug

@@ -1,156 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0
-menu "Kernel hacking"
-
-source "lib/Kconfig.debug"
-
-config DEBUG_DECOMPRESS_KERNEL
-	bool "Using serial port during decompressing kernel"
-	depends on DEBUG_KERNEL
-	default n
-	help
-	  If you say Y here you will confirm the start and the end of
-	  decompressing Linux seeing "Uncompressing Linux... " and
-	  "Ok, booting the kernel.\n" on console.
-
-config TEST_MISALIGNMENT_HANDLER
-	bool "Run tests on the misalignment handler"
-	depends on DEBUG_KERNEL
-	default n
-	help
-	  If you say Y here the kernel will execute a list of misaligned memory
-	  accesses to make sure the misalignment handler deals them with
-	  correctly.  If it does not, the kernel will throw a BUG.
-
-config KPROBES
-	bool "Kprobes"
-	depends on DEBUG_KERNEL
-	help
-	  Kprobes allows you to trap at almost any kernel address and
-	  execute a callback function.  register_kprobe() establishes
-	  a probepoint and specifies the callback.  Kprobes is useful
-	  for kernel debugging, non-intrusive instrumentation and testing.
-	  If in doubt, say "N".
-
-config GDBSTUB
-	bool "Remote GDB kernel debugging"
-	depends on DEBUG_KERNEL && DEPRECATED
-	select DEBUG_INFO
-	select FRAME_POINTER
-	help
-	  If you say Y here, it will be possible to remotely debug the kernel
-	  using gdb. This enlarges your kernel ELF image disk size by several
-	  megabytes and requires a machine with more than 16 MB, better 32 MB
-	  RAM to avoid excessive linking time. This is only useful for kernel
-	  hackers. If unsure, say N.
-
-	  This is deprecated in favour of KGDB and will be removed in a later
-	  version.
-
-config GDBSTUB_IMMEDIATE
-	bool "Break into GDB stub immediately"
-	depends on GDBSTUB
-	help
-	  If you say Y here, GDB stub will break into the program as soon as
-	  possible, leaving the program counter at the beginning of
-	  start_kernel() in init/main.c.
-
-config GDBSTUB_ALLOW_SINGLE_STEP
-	bool "Allow software single-stepping in GDB stub"
-	depends on GDBSTUB && !SMP && !PREEMPT
-	help
-	  Allow GDB stub to perform software single-stepping through the
-	  kernel.  This doesn't work very well on SMP or preemptible kernels as
-	  it uses temporary breakpoints to emulate single-stepping.
-
-config GDB_CONSOLE
-	bool "Console output to GDB"
-	depends on GDBSTUB
-	help
-	  If you are using GDB for remote debugging over a serial port and
-	  would like kernel messages to be formatted into GDB $O packets so
-	  that GDB prints them as program output, say 'Y'.
-
-config GDBSTUB_DEBUGGING
-	bool "Debug GDB stub by messages to serial port"
-	depends on GDBSTUB
-	help
-	  This causes debugging messages to be displayed at various points
-	  during execution of the GDB stub routines. Such messages will be
-	  displayed on ttyS0 if that isn't the GDB stub's port, or ttySM0
-	  otherwise.
-
-config GDBSTUB_DEBUG_ENTRY
-	bool "Debug GDB stub entry"
-	depends on GDBSTUB_DEBUGGING
-	help
-	  This option causes information to be displayed about entry to or exit
-	  from the main GDB stub routine.
-
-config GDBSTUB_DEBUG_PROTOCOL
-	bool "Debug GDB stub protocol"
-	depends on GDBSTUB_DEBUGGING
-	help
-	  This option causes information to be displayed about the GDB remote
-	  protocol messages generated exchanged with GDB.
-
-config GDBSTUB_DEBUG_IO
-	bool "Debug GDB stub I/O"
-	depends on GDBSTUB_DEBUGGING
-	help
-	  This option causes information to be displayed about GDB stub's
-	  low-level I/O.
-
-config GDBSTUB_DEBUG_BREAKPOINT
-	bool "Debug GDB stub breakpoint management"
-	depends on GDBSTUB_DEBUGGING
-	help
-	  This option causes information to be displayed about GDB stub's
-	  breakpoint management.
-
-choice
-	prompt "GDB stub port"
-	default GDBSTUB_ON_TTYSM0
-	depends on GDBSTUB
-	help
-	  Select the serial port used for GDB-stub.
-
-config GDBSTUB_ON_TTYSM0
-	bool "/dev/ttySM0 [SIF0]"
-	depends on MN10300_TTYSM0
-	select GDBSTUB_ON_TTYSMx
-
-config GDBSTUB_ON_TTYSM1
-	bool "/dev/ttySM1 [SIF1]"
-	depends on MN10300_TTYSM1
-	select GDBSTUB_ON_TTYSMx
-
-config GDBSTUB_ON_TTYSM2
-	bool "/dev/ttySM2 [SIF2]"
-	depends on MN10300_TTYSM2
-	select GDBSTUB_ON_TTYSMx
-
-config GDBSTUB_ON_TTYS0
-	bool "/dev/ttyS0"
-	select GDBSTUB_ON_TTYSx
-
-config GDBSTUB_ON_TTYS1
-	bool "/dev/ttyS1"
-	select GDBSTUB_ON_TTYSx
-
-endchoice
-
-config GDBSTUB_ON_TTYSMx
-	bool
-	depends on GDBSTUB_ON_TTYSM0 || GDBSTUB_ON_TTYSM1 || GDBSTUB_ON_TTYSM2
-	default y
-
-config GDBSTUB_ON_TTYSx
-	bool
-	depends on GDBSTUB_ON_TTYS0 || GDBSTUB_ON_TTYS1
-	default y
-
-endmenu
-
-config KERNEL_DEBUGGER
-	def_bool y
-	depends on GDBSTUB || KGDB

arch/mn10300/Makefile

@@ -1,99 +0,0 @@
-###############################################################################
-#
-# MN10300 Kernel makefile system specifications
-#
-# Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
-# Modified by David Howells (dhowells@redhat.com)
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public Licence
-# as published by the Free Software Foundation; either version
-# 2 of the Licence, or (at your option) any later version.
-#
-###############################################################################
-
-KBUILD_DEFCONFIG := asb2303_defconfig
-
-CCSPECS	:= $(shell $(CC) -v 2>&1 | grep "^Reading specs from " | head -1 | cut -c20-)
-CCDIR	:= $(strip $(patsubst %/specs,%,$(CCSPECS)))
-KBUILD_CPPFLAGS += -nostdinc -I$(CCDIR)/include
-
-LDFLAGS		:=
-OBJCOPYFLAGS	:= -O binary -R .note -R .comment -R .GCC-command-line -R .note.gnu.build-id -S
-#LDFLAGS_vmlinux := -Map linkmap.txt
-CHECKFLAGS	+=
-
-PROCESSOR	:= unset
-UNIT		:= unset
-
-KBUILD_CFLAGS	+= -mam33 -DCPU=AM33 $(call cc-option,-mmem-funcs,)
-KBUILD_AFLAGS	+= -mam33 -DCPU=AM33
-
-ifeq ($(CONFIG_MN10300_CURRENT_IN_E2),y)
-KBUILD_CFLAGS	+= -ffixed-e2 -fcall-saved-e5
-endif
-
-ifeq ($(CONFIG_MN10300_PROC_MN103E010),y)
-PROCESSOR	:= mn103e010
-endif
-ifeq ($(CONFIG_MN10300_PROC_MN2WS0050),y)
-PROCESSOR	:= mn2ws0050
-endif
-
-ifeq ($(CONFIG_MN10300_UNIT_ASB2303),y)
-UNIT		:= asb2303
-endif
-ifeq ($(CONFIG_MN10300_UNIT_ASB2305),y)
-UNIT		:= asb2305
-endif
-ifeq ($(CONFIG_MN10300_UNIT_ASB2364),y)
-UNIT		:= asb2364
-endif
-
-
-head-y		:= arch/mn10300/kernel/head.o
-
-core-y		+= arch/mn10300/kernel/ arch/mn10300/mm/
-
-ifneq ($(PROCESSOR),unset)
-core-y		+= arch/mn10300/proc-$(PROCESSOR)/
-endif
-ifneq ($(UNIT),unset)
-core-y		+= arch/mn10300/unit-$(UNIT)/
-endif
-libs-y		+= arch/mn10300/lib/
-
-drivers-$(CONFIG_OPROFILE)	+= arch/mn10300/oprofile/
-
-boot := arch/mn10300/boot
-
-.PHONY: zImage
-
-KBUILD_IMAGE := $(boot)/zImage
-CLEAN_FILES += $(boot)/zImage
-CLEAN_FILES += $(boot)/compressed/vmlinux
-CLEAN_FILES += $(boot)/compressed/vmlinux.bin
-CLEAN_FILES += $(boot)/compressed/vmlinux.bin.gz
-
-zImage: vmlinux
-	$(Q)$(MAKE) $(build)=$(boot) $(boot)/$@
-
-all: zImage
-
-bootstrap:
-	$(Q)$(MAKEBOOT) bootstrap
-
-archclean:
-	$(Q)$(MAKE) $(clean)=arch/mn10300/proc-mn103e010
-	$(Q)$(MAKE) $(clean)=arch/mn10300/unit-asb2303
-	$(Q)$(MAKE) $(clean)=arch/mn10300/unit-asb2305
-
-define archhelp
-  echo  '* zImage        - Compressed kernel image (arch/$(ARCH)/boot/zImage)'
-endef
-
-#
-# include the appropriate processor- and unit-specific headers
-#
-KBUILD_CPPFLAGS += -I$(srctree)/arch/mn10300/proc-$(PROCESSOR)/include
-KBUILD_CPPFLAGS += -I$(srctree)/arch/mn10300/unit-$(UNIT)/include

arch/mn10300/boot/.gitignore

@@ -1 +0,0 @@
-zImage

arch/mn10300/boot/Makefile

@@ -1,28 +0,0 @@
-# MN10300 kernel compressor and wrapper
-#
-# Copyright (C) 2007 Matsushita Electric Industrial Co., Ltd.
-# Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
-# Written by David Howells (dhowells@redhat.com)
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public Licence
-# as published by the Free Software Foundation; either version
-# 2 of the Licence, or (at your option) any later version.
-#
-
-targets		:= vmlinux.bin zImage
-
-subdir- 	:= compressed
-
-# ---------------------------------------------------------------------------
-
-
-$(obj)/zImage: $(obj)/compressed/vmlinux FORCE
-	$(call if_changed,objcopy)
-	@echo 'Kernel: $@ is ready'
-
-$(obj)/vmlinux.bin: $(obj)/compressed/vmlinux FORCE
-	$(call if_changed,objcopy)
-
-$(obj)/compressed/vmlinux: FORCE
-	$(Q)$(MAKE) $(build)=$(obj)/compressed IMAGE_OFFSET=$(IMAGE_OFFSET) $@

arch/mn10300/boot/compressed/Makefile

@@ -1,22 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0
-#
-# Create a compressed vmlinux image from the original vmlinux
-#
-
-targets		:= vmlinux vmlinux.bin vmlinux.bin.gz head.o misc.o piggy.o
-
-LDFLAGS_vmlinux := -Ttext $(CONFIG_KERNEL_ZIMAGE_BASE_ADDRESS) -e startup_32
-
-$(obj)/vmlinux: $(obj)/head.o $(obj)/misc.o $(obj)/piggy.o FORCE
-	$(call if_changed,ld)
-
-$(obj)/vmlinux.bin: vmlinux FORCE
-	$(call if_changed,objcopy)
-
-$(obj)/vmlinux.bin.gz: $(obj)/vmlinux.bin FORCE
-	$(call if_changed,gzip)
-
-LDFLAGS_piggy.o := -r --format binary --oformat elf32-am33lin -T
-
-$(obj)/piggy.o: $(obj)/vmlinux.lds $(obj)/vmlinux.bin.gz FORCE
-	$(call if_changed,ld)

arch/mn10300/boot/compressed/head.S

@@ -1,151 +0,0 @@
-/* Boot entry point for a compressed MN10300 kernel
- *
- * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
- * Written by David Howells (dhowells@redhat.com)
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public Licence
- * as published by the Free Software Foundation; either version
- * 2 of the Licence, or (at your option) any later version.
- */
-	.section	.text
-
-#define DEBUG
-
-#include <linux/linkage.h>
-#include <asm/cpu-regs.h>
-#include <asm/cache.h>
-#ifdef CONFIG_SMP
-#include <proc/smp-regs.h>
-#endif
-
-	.globl startup_32
-startup_32:
-#ifdef CONFIG_SMP
-	#
-	# Secondary CPUs jump directly to the kernel entry point
-	#
-	# Must save primary CPU's D0-D2 registers as they hold boot parameters
-	#
-	mov	(CPUID), d3
-	and	CPUID_MASK,d3
-	beq	startup_primary
-	mov	CONFIG_KERNEL_TEXT_ADDRESS,a0
-	jmp	(a0)
-
-startup_primary:
-#endif /* CONFIG_SMP */
-
-	# first save parameters from bootloader
-	mov	param_save_area,a0
-	mov	d0,(a0)
-	mov	d1,(4,a0)
-	mov	d2,(8,a0)
-
-	mov	sp,a3
-	mov	decomp_stack+0x2000-4,a0
-	mov	a0,sp
-
-	# invalidate and enable both of the caches
-	mov	CHCTR,a0
-	clr	d0
-	movhu	d0,(a0)					# turn off first
-	mov	CHCTR_ICINV|CHCTR_DCINV,d0
-	movhu	d0,(a0)
-	setlb
-	mov	(a0),d0
-	btst	CHCTR_ICBUSY|CHCTR_DCBUSY,d0		# wait till not busy
-	lne
-
-#ifdef CONFIG_MN10300_CACHE_ENABLED
-#ifdef CONFIG_MN10300_CACHE_WBACK
-	mov	CHCTR_ICEN|CHCTR_DCEN|CHCTR_DCWTMD_WRBACK,d0
-#else
-	mov	CHCTR_ICEN|CHCTR_DCEN|CHCTR_DCWTMD_WRTHROUGH,d0
-#endif /* WBACK */
-	movhu	d0,(a0)					# enable
-#endif /* !ENABLED */
-
-	# clear the BSS area
-	mov	__bss_start,a0
-	mov	_end,a1
-	clr	d0
-bssclear:
-	cmp	a1,a0
-	bge	bssclear_end
-	movbu	d0,(a0)
-	inc	a0
-	bra	bssclear
-bssclear_end:
-
-	# decompress the kernel
-	call	decompress_kernel[],0
-#ifdef CONFIG_MN10300_CACHE_WBACK
-	call	mn10300_dcache_flush_inv[],0
-#endif
-
-	# disable caches again
-	mov	CHCTR,a0
-	clr	d0
-	movhu	d0,(a0)
-	setlb
-	mov	(a0),d0
-	btst	CHCTR_ICBUSY|CHCTR_DCBUSY,d0		# wait till not busy
-	lne
-
-	mov	param_save_area,a0
-	mov	(a0),d0
-	mov	(4,a0),d1
-	mov	(8,a0),d2
-
-	# jump to the kernel proper entry point
-	mov	a3,sp
-	mov	CONFIG_KERNEL_TEXT_ADDRESS,a0
-	jmp	(a0)
-
-
-###############################################################################
-#
-# Cache flush routines
-#
-###############################################################################
-#ifdef CONFIG_MN10300_CACHE_WBACK
-mn10300_dcache_flush_inv:
-	movhu	(CHCTR),d0
-	btst	CHCTR_DCEN,d0
-	beq	mn10300_dcache_flush_inv_end
-
-	mov	L1_CACHE_NENTRIES,d1
-	clr	a1
-
-mn10300_dcache_flush_inv_loop:
-	mov	(DCACHE_PURGE_WAY0(0),a1),d0	# unconditional purge
-	mov	(DCACHE_PURGE_WAY1(0),a1),d0	# unconditional purge
-	mov	(DCACHE_PURGE_WAY2(0),a1),d0	# unconditional purge
-	mov	(DCACHE_PURGE_WAY3(0),a1),d0	# unconditional purge
-
-	add	L1_CACHE_BYTES,a1
-	add	-1,d1
-	bne	mn10300_dcache_flush_inv_loop
-
-mn10300_dcache_flush_inv_end:
-	ret	[],0
-#endif /* CONFIG_MN10300_CACHE_WBACK */
-
-
-###############################################################################
-#
-# Data areas
-#
-###############################################################################
-	.data
-	.align		4
-param_save_area:
-	.rept 3
-	.word		0
-	.endr
-
-	.section	.bss
-	.align		4
-decomp_stack:
-	.space		0x2000

arch/mn10300/boot/compressed/misc.c

@@ -1,393 +0,0 @@
-/* MN10300 Miscellaneous helper routines for kernel decompressor
- *
- * Copyright (C) 2007 Matsushita Electric Industrial Co., Ltd.
- * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
- * Modified by David Howells (dhowells@redhat.com)
- * - Derived from arch/x86/boot/compressed/misc_32.c
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public Licence
- * as published by the Free Software Foundation; either version
- * 2 of the Licence, or (at your option) any later version.
- */
-#include <linux/compiler.h>
-#include <asm/serial-regs.h>
-#include "misc.h"
-
-#ifndef CONFIG_GDBSTUB_ON_TTYSx
-/* display 'Uncompressing Linux... ' messages on ttyS0 or ttyS1 */
-#if 1	/* ttyS0 */
-#define CYG_DEV_BASE	0xA6FB0000
-#else   /* ttyS1 */
-#define CYG_DEV_BASE	0xA6FC0000
-#endif
-
-#define CYG_DEV_THR	(*((volatile __u8*)(CYG_DEV_BASE + 0x00)))
-#define CYG_DEV_MCR	(*((volatile __u8*)(CYG_DEV_BASE + 0x10)))
-#define SIO_MCR_DTR	0x01
-#define SIO_MCR_RTS	0x02
-#define CYG_DEV_LSR	(*((volatile __u8*)(CYG_DEV_BASE + 0x14)))
-#define SIO_LSR_THRE	0x20		/* transmitter holding register empty */
-#define SIO_LSR_TEMT	0x40		/* transmitter register empty */
-#define CYG_DEV_MSR	(*((volatile __u8*)(CYG_DEV_BASE + 0x18)))
-#define SIO_MSR_CTS	0x10		/* clear to send */
-#define SIO_MSR_DSR	0x20		/* data set ready */
-
-#define LSR_WAIT_FOR(STATE) \
-	do { while (!(CYG_DEV_LSR & SIO_LSR_##STATE)) {} } while (0)
-#define FLOWCTL_QUERY(LINE) \
-	({ CYG_DEV_MSR & SIO_MSR_##LINE; })
-#define FLOWCTL_WAIT_FOR(LINE) \
-	do { while (!(CYG_DEV_MSR & SIO_MSR_##LINE)) {} } while (0)
-#define FLOWCTL_CLEAR(LINE) \
-	do { CYG_DEV_MCR &= ~SIO_MCR_##LINE; } while (0)
-#define FLOWCTL_SET(LINE) \
-	do { CYG_DEV_MCR |= SIO_MCR_##LINE; } while (0)
-#endif
-
-/*
- * gzip declarations
- */
-
-#define OF(args)  args
-#define STATIC static
-
-#undef memset
-#undef memcpy
-
-static inline void *memset(const void *s, int c, size_t n)
-{
-	int i;
-	char *ss = (char *) s;
-
-	for (i = 0; i < n; i++)
-		ss[i] = c;
-	return (void *)s;
-}
-
-#define memzero(s, n) memset((s), 0, (n))
-
-static inline void *memcpy(void *__dest, const void *__src, size_t __n)
-{
-	int i;
-	const char *s = __src;
-	char *d = __dest;
-
-	for (i = 0; i < __n; i++)
-		d[i] = s[i];
-	return __dest;
-}
-
-typedef unsigned char  uch;
-typedef unsigned short ush;
-typedef unsigned long  ulg;
-
-#define WSIZE 0x8000	/* Window size must be at least 32k, and a power of
-			 * two */
-
-static uch *inbuf;	/* input buffer */
-static uch window[WSIZE]; /* sliding window buffer */
-
-static unsigned insize;	/* valid bytes in inbuf */
-static unsigned inptr;	/* index of next byte to be processed in inbuf */
-static unsigned outcnt;	/* bytes in output buffer */
-
-/* gzip flag byte */
-#define ASCII_FLAG   0x01 /* bit 0 set: file probably ASCII text */
-#define CONTINUATION 0x02 /* bit 1 set: continuation of multi-part gzip file */
-#define EXTRA_FIELD  0x04 /* bit 2 set: extra field present */
-#define ORIG_NAME    0x08 /* bit 3 set: original file name present */
-#define COMMENT      0x10 /* bit 4 set: file comment present */
-#define ENCRYPTED    0x20 /* bit 5 set: file is encrypted */
-#define RESERVED     0xC0 /* bit 6,7:   reserved */
-
-/* Diagnostic functions */
-#ifdef DEBUG
-#  define Assert(cond, msg) { if (!(cond)) error(msg); }
-#  define Trace(x)	fprintf x
-#  define Tracev(x)	{ if (verbose) fprintf x ; }
-#  define Tracevv(x)	{ if (verbose > 1) fprintf x ; }
-#  define Tracec(c, x)	{ if (verbose && (c)) fprintf x ; }
-#  define Tracecv(c, x)	{ if (verbose > 1 && (c)) fprintf x ; }
-#else
-#  define Assert(cond, msg)
-#  define Trace(x)
-#  define Tracev(x)
-#  define Tracevv(x)
-#  define Tracec(c, x)
-#  define Tracecv(c, x)
-#endif
-
-static int  fill_inbuf(void);
-static void flush_window(void);
-static void error(const char *) __attribute__((noreturn));
-static void kputs(const char *);
-
-static inline unsigned char get_byte(void)
-{
-	unsigned char ch = inptr < insize ? inbuf[inptr++] : fill_inbuf();
-
-#if 0
-	char hex[3];
-	hex[0] = ((ch & 0x0f) > 9) ?
-		((ch & 0x0f) + 'A' - 0xa) : ((ch & 0x0f) + '0');
-	hex[1] = ((ch >> 4) > 9) ?
-		((ch >> 4) + 'A' - 0xa) : ((ch >> 4) + '0');
-	hex[2] = 0;
-	kputs(hex);
-#endif
-	return ch;
-}
-
-/*
- * This is set up by the setup-routine at boot-time
- */
-#define EXT_MEM_K (*(unsigned short *)0x90002)
-#ifndef STANDARD_MEMORY_BIOS_CALL
-#define ALT_MEM_K (*(unsigned long *) 0x901e0)
-#endif
-#define SCREEN_INFO (*(struct screen_info *)0x90000)
-
-static long bytes_out;
-static uch *output_data;
-static unsigned long output_ptr;
-
-
-static unsigned long free_mem_ptr = (unsigned long) &end;
-static unsigned long free_mem_end_ptr = (unsigned long) &end + 0x90000;
-
-#define INPLACE_MOVE_ROUTINE	0x1000
-#define LOW_BUFFER_START	0x2000
-#define LOW_BUFFER_END		0x90000
-#define LOW_BUFFER_SIZE		(LOW_BUFFER_END - LOW_BUFFER_START)
-#define HEAP_SIZE		0x3000
-static int high_loaded;
-static uch *high_buffer_start /* = (uch *)(((ulg)&end) + HEAP_SIZE)*/;
-
-static char *vidmem = (char *)0xb8000;
-static int lines, cols;
-
-#define BOOTLOADER_INFLATE
-#include "../../../../lib/inflate.c"
-
-static inline void scroll(void)
-{
-	int i;
-
-	memcpy(vidmem, vidmem + cols * 2, (lines - 1) * cols * 2);
-	for (i = (lines - 1) * cols * 2; i < lines * cols * 2; i += 2)
-		vidmem[i] = ' ';
-}
-
-static inline void kputchar(unsigned char ch)
-{
-#ifdef CONFIG_MN10300_UNIT_ASB2305
-	while (SC0STR & SC01STR_TBF)
-		continue;
-
-	if (ch == 0x0a) {
-		SC0TXB = 0x0d;
-		while (SC0STR & SC01STR_TBF)
-			continue;
-	}
-
-	SC0TXB = ch;
-
-#else
-	while (SC1STR & SC01STR_TBF)
-		continue;
-
-	if (ch == 0x0a) {
-		SC1TXB = 0x0d;
-		while (SC1STR & SC01STR_TBF)
-			continue;
-	}
-
-	SC1TXB = ch;
-
-#endif
-}
-
-static void kputs(const char *s)
-{
-#ifdef CONFIG_DEBUG_DECOMPRESS_KERNEL
-#ifndef CONFIG_GDBSTUB_ON_TTYSx
-	char ch;
-
-	FLOWCTL_SET(DTR);
-
-	while (*s) {
-		LSR_WAIT_FOR(THRE);
-
-		ch = *s++;
-		if (ch == 0x0a) {
-			CYG_DEV_THR = 0x0d;
-			LSR_WAIT_FOR(THRE);
-		}
-		CYG_DEV_THR = ch;
-	}
-
-	FLOWCTL_CLEAR(DTR);
-#else
-
-	for (; *s; s++)
-		kputchar(*s);
-
-#endif
-#endif /* CONFIG_DEBUG_DECOMPRESS_KERNEL */
-}
-
-/* ===========================================================================
- * Fill the input buffer. This is called only when the buffer is empty
- * and at least one byte is really needed.
- */
-static int fill_inbuf()
-{
-	if (insize != 0)
-		error("ran out of input data\n");
-
-	inbuf = input_data;
-	insize = input_len;
-	inptr = 1;
-	return inbuf[0];
-}
-
-/* ===========================================================================
- * Write the output window window[0..outcnt-1] and update crc and bytes_out.
- * (Used for the decompressed data only.)
- */
-static void flush_window_low(void)
-{
-    ulg c = crc;         /* temporary variable */
-    unsigned n;
-    uch *in, *out, ch;
-
-    in = window;
-    out = &output_data[output_ptr];
-    for (n = 0; n < outcnt; n++) {
-	    ch = *out++ = *in++;
-	    c = crc_32_tab[((int)c ^ ch) & 0xff] ^ (c >> 8);
-    }
-    crc = c;
-    bytes_out += (ulg)outcnt;
-    output_ptr += (ulg)outcnt;
-    outcnt = 0;
-}
-
-static void flush_window_high(void)
-{
-    ulg c = crc;         /* temporary variable */
-    unsigned n;
-    uch *in,  ch;
-    in = window;
-    for (n = 0; n < outcnt; n++) {
-	ch = *output_data++ = *in++;
-	if ((ulg) output_data == LOW_BUFFER_END)
-		output_data = high_buffer_start;
-	c = crc_32_tab[((int)c ^ ch) & 0xff] ^ (c >> 8);
-    }
-    crc = c;
-    bytes_out += (ulg)outcnt;
-    outcnt = 0;
-}
-
-static void flush_window(void)
-{
-	if (high_loaded)
-		flush_window_high();
-	else
-		flush_window_low();
-}
-
-static void error(const char *x)
-{
-	kputs("\n\n");
-	kputs(x);
-	kputs("\n\n -- System halted");
-
-	while (1)
-		/* Halt */;
-}
-
-#define STACK_SIZE (4096)
-
-long user_stack[STACK_SIZE];
-
-struct {
-	long *a;
-	short b;
-} stack_start = { &user_stack[STACK_SIZE], 0 };
-
-void setup_normal_output_buffer(void)
-{
-#ifdef STANDARD_MEMORY_BIOS_CALL
-	if (EXT_MEM_K < 1024)
-		error("Less than 2MB of memory.\n");
-#else
-	if ((ALT_MEM_K > EXT_MEM_K ? ALT_MEM_K : EXT_MEM_K) < 1024)
-		error("Less than 2MB of memory.\n");
-#endif
-	output_data = (char *) 0x100000; /* Points to 1M */
-}
-
-struct moveparams {
-	uch *low_buffer_start;
-	int lcount;
-	uch *high_buffer_start;
-	int hcount;
-};
-
-void setup_output_buffer_if_we_run_high(struct moveparams *mv)
-{
-	high_buffer_start = (uch *)(((ulg) &end) + HEAP_SIZE);
-#ifdef STANDARD_MEMORY_BIOS_CALL
-	if (EXT_MEM_K < (3 * 1024))
-		error("Less than 4MB of memory.\n");
-#else
-	if ((ALT_MEM_K > EXT_MEM_K ? ALT_MEM_K : EXT_MEM_K) < (3 * 1024))
-		error("Less than 4MB of memory.\n");
-#endif
-	mv->low_buffer_start = output_data = (char *) LOW_BUFFER_START;
-	high_loaded = 1;
-	free_mem_end_ptr = (long) high_buffer_start;
-	if (0x100000 + LOW_BUFFER_SIZE > (ulg) high_buffer_start) {
-		high_buffer_start = (uch *)(0x100000 + LOW_BUFFER_SIZE);
-		mv->hcount = 0; /* say: we need not to move high_buffer */
-	} else {
-		mv->hcount = -1;
-	}
-	mv->high_buffer_start = high_buffer_start;
-}
-
-void close_output_buffer_if_we_run_high(struct moveparams *mv)
-{
-	mv->lcount = bytes_out;
-	if (bytes_out > LOW_BUFFER_SIZE) {
-		mv->lcount = LOW_BUFFER_SIZE;
-		if (mv->hcount)
-			mv->hcount = bytes_out - LOW_BUFFER_SIZE;
-	} else {
-		mv->hcount = 0;
-	}
-}
-
-#undef DEBUGFLAG
-#ifdef DEBUGFLAG
-int debugflag;
-#endif
-
-int decompress_kernel(struct moveparams *mv)
-{
-#ifdef DEBUGFLAG
-	while (!debugflag)
-		barrier();
-#endif
-
-	output_data = (char *) CONFIG_KERNEL_TEXT_ADDRESS;
-
-	makecrc();
-	kputs("Uncompressing Linux... ");
-	gunzip();
-	kputs("Ok, booting the kernel.\n");
-	return 0;
-}

arch/mn10300/boot/compressed/misc.h

@@ -1,18 +0,0 @@
-/* Internal definitions for the MN10300 kernel decompressor
- *
- * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
- * Written by David Howells (dhowells@redhat.com)
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public Licence
- * as published by the Free Software Foundation; either version
- * 2 of the Licence, or (at your option) any later version.
- */
-
-extern int end;
-
-/*
- * vmlinux.lds
- */
-extern char input_data[];
-extern int input_len;

arch/mn10300/boot/compressed/vmlinux.lds

@@ -1,9 +0,0 @@
-SECTIONS
-{
-  .data : {
-	input_len = .;
-	LONG(input_data_end - input_data) input_data = .;
-	*(.data)
-	input_data_end = .;
-	}
-}

arch/mn10300/boot/install.sh

@@ -1,67 +0,0 @@
-#!/bin/sh
-#
-# arch/mn10300/boot/install -c.sh
-#
-# This file is subject to the terms and conditions of the GNU General Public
-# Licence.  See the file "COPYING" in the main directory of this archive
-# for more details.
-#
-# Copyright (C) 1995 by Linus Torvalds
-#
-# Adapted from code in arch/i386/boot/Makefile by H. Peter Anvin
-#
-# "make install -c" script for i386 architecture
-#
-# Arguments:
-#   $1 - kernel version
-#   $2 - kernel image file
-#   $3 - kernel map file
-#   $4 - default install -c path (blank if root directory)
-#   $5 - boot rom file
-#
-
-# User may have a custom install -c script
-
-rm -fr $4/../usr/include/linux $4/../usr/include/asm
-install -c -m 0755 $2 $4/vmlinuz
-install -c -m 0755 $5 $4/boot.rom
-install -c -m 0755 -d $4/../usr/include/linux
-cd ${srctree}/include/linux
-for i in `find . -maxdepth 1 -name '*.h' -print`; do
-  install -c -m 0644 $i $4/../usr/include/linux
-done
-install -c -m 0755 -d $4/../usr/include/linux/byteorder
-cd ${srctree}/include/linux/byteorder
-for i in `find . -name '*.h' -print`; do
-  install -c -m 0644 $i $4/../usr/include/linux/byteorder
-done
-install -c -m 0755 -d $4/../usr/include/linux/lockd
-cd ${srctree}/include/linux/lockd
-for i in `find . -name '*.h' -print`; do
-  install -c -m 0644 $i $4/../usr/include/linux/lockd
-done
-install -c -m 0755 -d $4/../usr/include/linux/netfilter_ipv4
-cd ${srctree}/include/linux/netfilter_ipv4
-for i in `find . -name '*.h' -print`; do
-  install -c -m 0644 $i $4/../usr/include/linux/netfilter_ipv4
-done
-install -c -m 0755 -d $4/../usr/include/linux/nfsd
-cd ${srctree}/include/linux/nfsd
-for i in `find . -name '*.h' -print`; do
-  install -c -m 0644 $i $4/../usr/include/linux/nfsd/$i
-done
-install -c -m 0755 -d $4/../usr/include/linux/raid
-cd ${srctree}/include/linux/raid
-for i in `find . -name '*.h' -print`; do
-  install -c -m 0644 $i $4/../usr/include/linux/raid
-done
-install -c -m 0755 -d $4/../usr/include/linux/sunrpc
-cd ${srctree}/include/linux/sunrpc
-for i in `find . -name '*.h' -print`; do
-  install -c -m 0644 $i $4/../usr/include/linux/sunrpc
-done
-install -c -m 0755 -d $4/../usr/include/asm
-cd ${srctree}/include/asm
-for i in `find . -name '*.h' -print`; do
-  install -c -m 0644 $i $4/../usr/include/asm
-done

arch/mn10300/boot/tools/build.c

@@ -1,191 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- *  Copyright (C) 1991, 1992  Linus Torvalds
- *  Copyright (C) 1997 Martin Mares
- */
-
-/*
- * This file builds a disk-image from three different files:
- *
- * - bootsect: exactly 512 bytes of 8086 machine code, loads the rest
- * - setup: 8086 machine code, sets up system parm
- * - system: 80386 code for actual system
- *
- * It does some checking that all files are of the correct type, and
- * just writes the result to stdout, removing headers and padding to
- * the right amount. It also writes some system data to stderr.
- */
-
-/*
- * Changes by tytso to allow root device specification
- * High loaded stuff by Hans Lermen & Werner Almesberger, Feb. 1996
- * Cross compiling fixes by Gertjan van Wingerde, July 1996
- * Rewritten by Martin Mares, April 1997
- */
-
-#include <stdio.h>
-#include <string.h>
-#include <stdlib.h>
-#include <stdarg.h>
-#include <sys/types.h>
-#include <sys/stat.h>
-#include <sys/sysmacros.h>
-#include <unistd.h>
-#include <fcntl.h>
-#include <asm/boot.h>
-
-#define DEFAULT_MAJOR_ROOT 0
-#define DEFAULT_MINOR_ROOT 0
-
-/* Minimal number of setup sectors (see also bootsect.S) */
-#define SETUP_SECTS 4
-
-uint8_t buf[1024];
-int fd;
-int is_big_kernel;
-
-__attribute__((noreturn))
-void die(const char *str, ...)
-{
-	va_list args;
-	va_start(args, str);
-	vfprintf(stderr, str, args);
-	fputc('\n', stderr);
-	exit(1);
-}
-
-void file_open(const char *name)
-{
-	fd = open(name, O_RDONLY, 0);
-	if (fd < 0)
-		die("Unable to open `%s': %m", name);
-}
-
-__attribute__((noreturn))
-void usage(void)
-{
-	die("Usage: build [-b] bootsect setup system [rootdev] [> image]");
-}
-
-int main(int argc, char **argv)
-{
-	unsigned int i, c, sz, setup_sectors;
-	uint32_t sys_size;
-	uint8_t major_root, minor_root;
-	struct stat sb;
-
-	if (argc > 2 && !strcmp(argv[1], "-b")) {
-		is_big_kernel = 1;
-		argc--, argv++;
-	}
-	if ((argc < 4) || (argc > 5))
-		usage();
-	if (argc > 4) {
-		if (!strcmp(argv[4], "CURRENT")) {
-			if (stat("/", &sb)) {
-				perror("/");
-				die("Couldn't stat /");
-			}
-			major_root = major(sb.st_dev);
-			minor_root = minor(sb.st_dev);
-		} else if (strcmp(argv[4], "FLOPPY")) {
-			if (stat(argv[4], &sb)) {
-				perror(argv[4]);
-				die("Couldn't stat root device.");
-			}
-			major_root = major(sb.st_rdev);
-			minor_root = minor(sb.st_rdev);
-		} else {
-			major_root = 0;
-			minor_root = 0;
-		}
-	} else {
-		major_root = DEFAULT_MAJOR_ROOT;
-		minor_root = DEFAULT_MINOR_ROOT;
-	}
-	fprintf(stderr, "Root device is (%d, %d)\n", major_root, minor_root);
-
-	file_open(argv[1]);
-	i = read(fd, buf, sizeof(buf));
-	fprintf(stderr, "Boot sector %d bytes.\n", i);
-	if (i != 512)
-		die("Boot block must be exactly 512 bytes");
-	if (buf[510] != 0x55 || buf[511] != 0xaa)
-		die("Boot block hasn't got boot flag (0xAA55)");
-	buf[508] = minor_root;
-	buf[509] = major_root;
-	if (write(1, buf, 512) != 512)
-		die("Write call failed");
-	close(fd);
-
-	/* Copy the setup code */
-	file_open(argv[2]);
-	for (i = 0; (c = read(fd, buf, sizeof(buf))) > 0; i += c)
-		if (write(1, buf, c) != c)
-			die("Write call failed");
-	if (c != 0)
-		die("read-error on `setup'");
-	close(fd);
-
-	/* Pad unused space with zeros */
-	setup_sectors = (i + 511) / 512;
-	/* for compatibility with ancient versions of LILO. */
-	if (setup_sectors < SETUP_SECTS)
-		setup_sectors = SETUP_SECTS;
-	fprintf(stderr, "Setup is %d bytes.\n", i);
-	memset(buf, 0, sizeof(buf));
-	while (i < setup_sectors * 512) {
-		c = setup_sectors * 512 - i;
-		if (c > sizeof(buf))
-			c = sizeof(buf);
-		if (write(1, buf, c) != c)
-			die("Write call failed");
-		i += c;
-	}
-
-	file_open(argv[3]);
-	if (fstat(fd, &sb))
-		die("Unable to stat `%s': %m", argv[3]);
-	sz = sb.st_size;
-	fprintf(stderr, "System is %d kB\n", sz / 1024);
-	sys_size = (sz + 15) / 16;
-	/* 0x28000*16 = 2.5 MB, conservative estimate for the current maximum */
-	if (sys_size > (is_big_kernel ? 0x28000 : DEF_SYSSIZE))
-		die("System is too big. Try using %smodules.",
-			is_big_kernel ? "" : "bzImage or ");
-	if (sys_size > 0xffff)
-		fprintf(stderr,
-			"warning: kernel is too big for standalone boot "
-			"from floppy\n");
-	while (sz > 0) {
-		int l, n;
-
-		l = (sz > sizeof(buf)) ? sizeof(buf) : sz;
-		n = read(fd, buf, l);
-		if (n != l) {
-			if (n < 0)
-				die("Error reading %s: %m", argv[3]);
-			else
-				die("%s: Unexpected EOF", argv[3]);
-		}
-		if (write(1, buf, l) != l)
-			die("Write failed");
-		sz -= l;
-	}
-	close(fd);
-
-	/* Write sizes to the bootsector */
-	if (lseek(1, 497, SEEK_SET) != 497)
-		die("Output: seek failed");
-	buf[0] = setup_sectors;
-	if (write(1, buf, 1) != 1)
-		die("Write of setup sector count failed");
-	if (lseek(1, 500, SEEK_SET) != 500)
-		die("Output: seek failed");
-	buf[0] = (sys_size & 0xff);
-	buf[1] = ((sys_size >> 8) & 0xff);
-	if (write(1, buf, 2) != 2)
-		die("Write of image length failed");
-
-	return 0;
-}

arch/mn10300/configs/asb2303_defconfig

@@ -1,67 +0,0 @@
-CONFIG_SYSVIPC=y
-CONFIG_BSD_PROCESS_ACCT=y
-CONFIG_TINY_RCU=y
-CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_EXPERT=y
-# CONFIG_KALLSYMS is not set
-# CONFIG_HOTPLUG is not set
-# CONFIG_VM_EVENT_COUNTERS is not set
-CONFIG_SLAB=y
-CONFIG_PROFILING=y
-# CONFIG_BLOCK is not set
-CONFIG_PREEMPT=y
-CONFIG_NO_HZ=y
-CONFIG_HIGH_RES_TIMERS=y
-CONFIG_MN10300_RTC=y
-CONFIG_MN10300_TTYSM_CONSOLE=y
-CONFIG_MN10300_TTYSM0=y
-CONFIG_MN10300_TTYSM1=y
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_INET=y
-CONFIG_IP_MULTICAST=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_BOOTP=y
-# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
-# CONFIG_INET_XFRM_MODE_TUNNEL is not set
-# CONFIG_INET_XFRM_MODE_BEET is not set
-# CONFIG_INET_DIAG is not set
-# CONFIG_IPV6 is not set
-# CONFIG_WIRELESS is not set
-CONFIG_MTD=y
-CONFIG_MTD_DEBUG=y
-CONFIG_MTD_REDBOOT_PARTS=y
-CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED=y
-CONFIG_MTD_CFI=y
-CONFIG_MTD_JEDECPROBE=y
-CONFIG_MTD_CFI_ADV_OPTIONS=y
-CONFIG_MTD_CFI_GEOMETRY=y
-CONFIG_MTD_CFI_I4=y
-CONFIG_MTD_CFI_AMDSTD=y
-CONFIG_MTD_PHYSMAP=y
-CONFIG_NETDEVICES=y
-CONFIG_NET_ETHERNET=y
-CONFIG_SMC91X=y
-# CONFIG_WLAN is not set
-# CONFIG_INPUT is not set
-# CONFIG_SERIO is not set
-# CONFIG_VT is not set
-CONFIG_SERIAL_8250=y
-CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_SERIAL_8250_EXTENDED=y
-CONFIG_SERIAL_8250_SHARE_IRQ=y
-# CONFIG_HW_RANDOM is not set
-CONFIG_RTC=y
-# CONFIG_HWMON is not set
-# CONFIG_USB_SUPPORT is not set
-CONFIG_PROC_KCORE=y
-# CONFIG_PROC_PAGE_MONITOR is not set
-CONFIG_TMPFS=y
-CONFIG_JFFS2_FS=y
-CONFIG_NFS_FS=y
-CONFIG_NFS_V3=y
-CONFIG_ROOT_NFS=y
-CONFIG_MAGIC_SYSRQ=y
-CONFIG_STRIP_ASM_SYMS=y

arch/mn10300/configs/asb2364_defconfig

@@ -1,87 +0,0 @@
-CONFIG_SYSVIPC=y
-CONFIG_POSIX_MQUEUE=y
-CONFIG_BSD_PROCESS_ACCT=y
-CONFIG_TASKSTATS=y
-CONFIG_TASK_DELAY_ACCT=y
-CONFIG_TASK_XACCT=y
-CONFIG_TASK_IO_ACCOUNTING=y
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_CGROUPS=y
-CONFIG_CGROUP_FREEZER=y
-CONFIG_CGROUP_DEVICE=y
-CONFIG_CGROUP_CPUACCT=y
-CONFIG_RELAY=y
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_EXPERT=y
-# CONFIG_KALLSYMS is not set
-# CONFIG_VM_EVENT_COUNTERS is not set
-CONFIG_SLAB=y
-CONFIG_PROFILING=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-# CONFIG_BLOCK is not set
-CONFIG_MN10300_UNIT_ASB2364=y
-CONFIG_PREEMPT=y
-# CONFIG_MN10300_USING_JTAG is not set
-CONFIG_NO_HZ=y
-CONFIG_HIGH_RES_TIMERS=y
-CONFIG_MN10300_TTYSM_CONSOLE=y
-CONFIG_MN10300_TTYSM0=y
-CONFIG_MN10300_TTYSM0_TIMER2=y
-CONFIG_MN10300_TTYSM1=y
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_INET=y
-CONFIG_IP_MULTICAST=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_BOOTP=y
-# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
-# CONFIG_INET_XFRM_MODE_TUNNEL is not set
-# CONFIG_INET_XFRM_MODE_BEET is not set
-# CONFIG_INET_DIAG is not set
-CONFIG_IPV6=y
-# CONFIG_INET6_XFRM_MODE_TRANSPORT is not set
-# CONFIG_INET6_XFRM_MODE_TUNNEL is not set
-# CONFIG_INET6_XFRM_MODE_BEET is not set
-CONFIG_CONNECTOR=y
-CONFIG_MTD=y
-CONFIG_MTD_DEBUG=y
-CONFIG_MTD_REDBOOT_PARTS=y
-CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED=y
-CONFIG_MTD_CFI=y
-CONFIG_MTD_JEDECPROBE=y
-CONFIG_MTD_CFI_ADV_OPTIONS=y
-CONFIG_MTD_CFI_GEOMETRY=y
-CONFIG_MTD_CFI_I4=y
-CONFIG_MTD_CFI_AMDSTD=y
-CONFIG_MTD_PHYSMAP=y
-CONFIG_NETDEVICES=y
-CONFIG_NET_ETHERNET=y
-CONFIG_SMSC911X=y
-# CONFIG_INPUT_MOUSEDEV is not set
-# CONFIG_INPUT_KEYBOARD is not set
-# CONFIG_INPUT_MOUSE is not set
-# CONFIG_SERIO is not set
-# CONFIG_VT is not set
-CONFIG_SERIAL_8250=y
-CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_SERIAL_8250_EXTENDED=y
-CONFIG_SERIAL_8250_SHARE_IRQ=y
-# CONFIG_HW_RANDOM is not set
-# CONFIG_HWMON is not set
-# CONFIG_USB_SUPPORT is not set
-CONFIG_PROC_KCORE=y
-# CONFIG_PROC_PAGE_MONITOR is not set
-CONFIG_TMPFS=y
-CONFIG_TMPFS_POSIX_ACL=y
-CONFIG_JFFS2_FS=y
-CONFIG_NFS_FS=y
-CONFIG_NFS_V3=y
-CONFIG_ROOT_NFS=y
-CONFIG_MAGIC_SYSRQ=y
-CONFIG_STRIP_ASM_SYMS=y
-CONFIG_DEBUG_KERNEL=y
-CONFIG_DETECT_HUNG_TASK=y
-# CONFIG_DEBUG_BUGVERBOSE is not set
-CONFIG_DEBUG_INFO=y

arch/mn10300/include/asm/Kbuild

@@ -1,13 +0,0 @@
-
-generic-y += barrier.h
-generic-y += device.h
-generic-y += exec.h
-generic-y += extable.h
-generic-y += fb.h
-generic-y += irq_work.h
-generic-y += mcs_spinlock.h
-generic-y += mm-arch-hooks.h
-generic-y += preempt.h
-generic-y += sections.h
-generic-y += trace_clock.h
-generic-y += word-at-a-time.h

arch/mn10300/include/asm/asm-offsets.h

@@ -1 +0,0 @@
-#include <generated/asm-offsets.h>

arch/mn10300/include/asm/atomic.h

@@ -1,161 +0,0 @@
-/* MN10300 Atomic counter operations
- *
- * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
- * Written by David Howells (dhowells@redhat.com)
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public Licence
- * as published by the Free Software Foundation; either version
- * 2 of the Licence, or (at your option) any later version.
- */
-#ifndef _ASM_ATOMIC_H
-#define _ASM_ATOMIC_H
-
-#include <asm/irqflags.h>
-#include <asm/cmpxchg.h>
-#include <asm/barrier.h>
-
-#ifndef CONFIG_SMP
-#include <asm-generic/atomic.h>
-#else
-
-/*
- * Atomic operations that C can't guarantee us.  Useful for
- * resource counting etc..
- */
-
-#define ATOMIC_INIT(i)	{ (i) }
-
-#ifdef __KERNEL__
-
-/**
- * atomic_read - read atomic variable
- * @v: pointer of type atomic_t
- *
- * Atomically reads the value of @v.  Note that the guaranteed
- */
-#define atomic_read(v)	READ_ONCE((v)->counter)
-
-/**
- * atomic_set - set atomic variable
- * @v: pointer of type atomic_t
- * @i: required value
- *
- * Atomically sets the value of @v to @i.  Note that the guaranteed
- */
-#define atomic_set(v, i) WRITE_ONCE(((v)->counter), (i))
-
-#define ATOMIC_OP(op)							\
-static inline void atomic_##op(int i, atomic_t *v)			\
-{									\
-	int retval, status;						\
-									\
-	asm volatile(							\
-		"1:	mov	%4,(_AAR,%3)	\n"			\
-		"	mov	(_ADR,%3),%1	\n"			\
-		"	" #op "	%5,%1		\n"			\
-		"	mov	%1,(_ADR,%3)	\n"			\
-		"	mov	(_ADR,%3),%0	\n"	/* flush */	\
-		"	mov	(_ASR,%3),%0	\n"			\
-		"	or	%0,%0		\n"			\
-		"	bne	1b		\n"			\
-		: "=&r"(status), "=&r"(retval), "=m"(v->counter)	\
-		: "a"(ATOMIC_OPS_BASE_ADDR), "r"(&v->counter), "r"(i)	\
-		: "memory", "cc");					\
-}
-
-#define ATOMIC_OP_RETURN(op)						\
-static inline int atomic_##op##_return(int i, atomic_t *v)		\
-{									\
-	int retval, status;						\
-									\
-	asm volatile(							\
-		"1:	mov	%4,(_AAR,%3)	\n"			\
-		"	mov	(_ADR,%3),%1	\n"			\
-		"	" #op "	%5,%1		\n"			\
-		"	mov	%1,(_ADR,%3)	\n"			\
-		"	mov	(_ADR,%3),%0	\n"	/* flush */	\
-		"	mov	(_ASR,%3),%0	\n"			\
-		"	or	%0,%0		\n"			\
-		"	bne	1b		\n"			\
-		: "=&r"(status), "=&r"(retval), "=m"(v->counter)	\
-		: "a"(ATOMIC_OPS_BASE_ADDR), "r"(&v->counter), "r"(i)	\
-		: "memory", "cc");					\
-	return retval;							\
-}
-
-#define ATOMIC_FETCH_OP(op)						\
-static inline int atomic_fetch_##op(int i, atomic_t *v)			\
-{									\
-	int retval, status;						\
-									\
-	asm volatile(							\
-		"1:	mov	%4,(_AAR,%3)	\n"			\
-		"	mov	(_ADR,%3),%1	\n"			\
-		"	mov	%1,%0		\n"			\
-		"	" #op "	%5,%0		\n"			\
-		"	mov	%0,(_ADR,%3)	\n"			\
-		"	mov	(_ADR,%3),%0	\n"	/* flush */	\
-		"	mov	(_ASR,%3),%0	\n"			\
-		"	or	%0,%0		\n"			\
-		"	bne	1b		\n"			\
-		: "=&r"(status), "=&r"(retval), "=m"(v->counter)	\
-		: "a"(ATOMIC_OPS_BASE_ADDR), "r"(&v->counter), "r"(i)	\
-		: "memory", "cc");					\
-	return retval;							\
-}
-
-#define ATOMIC_OPS(op) ATOMIC_OP(op) ATOMIC_OP_RETURN(op) ATOMIC_FETCH_OP(op)
-
-ATOMIC_OPS(add)
-ATOMIC_OPS(sub)
-
-#undef ATOMIC_OPS
-#define ATOMIC_OPS(op) ATOMIC_OP(op) ATOMIC_FETCH_OP(op)
-
-ATOMIC_OPS(and)
-ATOMIC_OPS(or)
-ATOMIC_OPS(xor)
-
-#undef ATOMIC_OPS
-#undef ATOMIC_FETCH_OP
-#undef ATOMIC_OP_RETURN
-#undef ATOMIC_OP
-
-static inline int atomic_add_negative(int i, atomic_t *v)
-{
-	return atomic_add_return(i, v) < 0;
-}
-
-static inline void atomic_inc(atomic_t *v)
-{
-	atomic_add_return(1, v);
-}
-
-static inline void atomic_dec(atomic_t *v)
-{
-	atomic_sub_return(1, v);
-}
-
-#define atomic_dec_return(v)		atomic_sub_return(1, (v))
-#define atomic_inc_return(v)		atomic_add_return(1, (v))
-
-#define atomic_sub_and_test(i, v)	(atomic_sub_return((i), (v)) == 0)
-#define atomic_dec_and_test(v)		(atomic_sub_return(1, (v)) == 0)
-#define atomic_inc_and_test(v)		(atomic_add_return(1, (v)) == 0)
-
-#define __atomic_add_unless(v, a, u)				\
-({								\
-	int c, old;						\
-	c = atomic_read(v);					\
-	while (c != (u) && (old = atomic_cmpxchg((v), c, c + (a))) != c) \
-		c = old;					\
-	c;							\
-})
-
-#define atomic_xchg(ptr, v)		(xchg(&(ptr)->counter, (v)))
-#define atomic_cmpxchg(v, old, new)	(cmpxchg(&((v)->counter), (old), (new)))
-
-#endif /* __KERNEL__ */
-#endif /* CONFIG_SMP */
-#endif /* _ASM_ATOMIC_H */

arch/mn10300/include/asm/bitops.h

@@ -1,232 +0,0 @@
-/* MN10300 bit operations
- *
- * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
- * Written by David Howells (dhowells@redhat.com)
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public Licence
- * as published by the Free Software Foundation; either version
- * 2 of the Licence, or (at your option) any later version.
- *
- * These have to be done with inline assembly: that way the bit-setting
- * is guaranteed to be atomic. All bit operations return 0 if the bit
- * was cleared before the operation and != 0 if it was not.
- *
- * bit 0 is the LSB of addr; bit 32 is the LSB of (addr+1).
- */
-#ifndef __ASM_BITOPS_H
-#define __ASM_BITOPS_H
-
-#include <asm/cpu-regs.h>
-#include <asm/barrier.h>
-
-/*
- * set bit
- */
-#define __set_bit(nr, addr)					\
-({								\
-	volatile unsigned char *_a = (unsigned char *)(addr);	\
-	const unsigned shift = (nr) & 7;			\
-	_a += (nr) >> 3;					\
-								\
-	asm volatile("bset %2,(%1) # set_bit reg"		\
-		     : "=m"(*_a)				\
-		     : "a"(_a), "d"(1 << shift),  "m"(*_a)	\
-		     : "memory", "cc");				\
-})
-
-#define set_bit(nr, addr) __set_bit((nr), (addr))
-
-/*
- * clear bit
- */
-#define ___clear_bit(nr, addr)					\
-({								\
-	volatile unsigned char *_a = (unsigned char *)(addr);	\
-	const unsigned shift = (nr) & 7;			\
-	_a += (nr) >> 3;					\
-								\
-	asm volatile("bclr %2,(%1) # clear_bit reg"		\
-		     : "=m"(*_a)				\
-		     : "a"(_a), "d"(1 << shift), "m"(*_a)	\
-		     : "memory", "cc");				\
-})
-
-#define clear_bit(nr, addr) ___clear_bit((nr), (addr))
-
-
-static inline void __clear_bit(unsigned long nr, volatile void *addr)
-{
-	unsigned int *a = (unsigned int *) addr;
-	int mask;
-
-	a += nr >> 5;
-	mask = 1 << (nr & 0x1f);
-	*a &= ~mask;
-}
-
-/*
- * test bit
- */
-static inline int test_bit(unsigned long nr, const volatile void *addr)
-{
-	return 1UL & (((const volatile unsigned int *) addr)[nr >> 5] >> (nr & 31));
-}
-
-/*
- * change bit
- */
-static inline void __change_bit(unsigned long nr, volatile void *addr)
-{
-	int	mask;
-	unsigned int *a = (unsigned int *) addr;
-
-	a += nr >> 5;
-	mask = 1 << (nr & 0x1f);
-	*a ^= mask;
-}
-
-extern void change_bit(unsigned long nr, volatile void *addr);
-
-/*
- * test and set bit
- */
-#define __test_and_set_bit(nr,addr)				\
-({								\
-	volatile unsigned char *_a = (unsigned char *)(addr);	\
-	const unsigned shift = (nr) & 7;			\
-	unsigned epsw;						\
-	_a += (nr) >> 3;					\
-								\
-	asm volatile("bset %3,(%2) # test_set_bit reg\n"	\
-		     "mov epsw,%1"				\
-		     : "=m"(*_a), "=d"(epsw)			\
-		     : "a"(_a), "d"(1 << shift), "m"(*_a)	\
-		     : "memory", "cc");				\
-								\
-	!(epsw & EPSW_FLAG_Z);					\
-})
-
-#define test_and_set_bit(nr, addr) __test_and_set_bit((nr), (addr))
-
-/*
- * test and clear bit
- */
-#define __test_and_clear_bit(nr, addr)				\
-({								\
-        volatile unsigned char *_a = (unsigned char *)(addr);	\
-	const unsigned shift = (nr) & 7;			\
-	unsigned epsw;						\
-	_a += (nr) >> 3;					\
-								\
-	asm volatile("bclr %3,(%2) # test_clear_bit reg\n"	\
-		     "mov epsw,%1"				\
-		     : "=m"(*_a), "=d"(epsw)			\
-		     : "a"(_a), "d"(1 << shift), "m"(*_a)	\
-		     : "memory", "cc");				\
-								\
-	!(epsw & EPSW_FLAG_Z);					\
-})
-
-#define test_and_clear_bit(nr, addr) __test_and_clear_bit((nr), (addr))
-
-/*
- * test and change bit
- */
-static inline int __test_and_change_bit(unsigned long nr, volatile void *addr)
-{
-	int	mask, retval;
-	unsigned int *a = (unsigned int *)addr;
-
-	a += nr >> 5;
-	mask = 1 << (nr & 0x1f);
-	retval = (mask & *a) != 0;
-	*a ^= mask;
-
-	return retval;
-}
-
-extern int test_and_change_bit(unsigned long nr, volatile void *addr);
-
-#include <asm-generic/bitops/lock.h>
-
-#ifdef __KERNEL__
-
-/**
- * __ffs - find first bit set
- * @x: the word to search
- *
- * - return 31..0 to indicate bit 31..0 most least significant bit set
- * - if no bits are set in x, the result is undefined
- */
-static inline __attribute__((const))
-unsigned long __ffs(unsigned long x)
-{
-	int bit;
-	asm("bsch %2,%0" : "=r"(bit) : "0"(0), "r"(x & -x) : "cc");
-	return bit;
-}
-
-/*
- * special slimline version of fls() for calculating ilog2_u32()
- * - note: no protection against n == 0
- */
-static inline __attribute__((const))
-int __ilog2_u32(u32 n)
-{
-	int bit;
-	asm("bsch %2,%0" : "=r"(bit) : "0"(0), "r"(n) : "cc");
-	return bit;
-}
-
-/**
- * fls - find last bit set
- * @x: the word to search
- *
- * This is defined the same way as ffs:
- * - return 32..1 to indicate bit 31..0 most significant bit set
- * - return 0 to indicate no bits set
- */
-static inline __attribute__((const))
-int fls(int x)
-{
-	return (x != 0) ? __ilog2_u32(x) + 1 : 0;
-}
-
-/**
- * __fls - find last (most-significant) set bit in a long word
- * @word: the word to search
- *
- * Undefined if no set bit exists, so code should check against 0 first.
- */
-static inline unsigned long __fls(unsigned long word)
-{
-	return __ilog2_u32(word);
-}
-
-/**
- * ffs - find first bit set
- * @x: the word to search
- *
- * - return 32..1 to indicate bit 31..0 most least significant bit set
- * - return 0 to indicate no bits set
- */
-static inline __attribute__((const))
-int ffs(int x)
-{
-	/* Note: (x & -x) gives us a mask that is the least significant
-	 * (rightmost) 1-bit of the value in x.
-	 */
-	return fls(x & -x);
-}
-
-#include <asm-generic/bitops/ffz.h>
-#include <asm-generic/bitops/fls64.h>
-#include <asm-generic/bitops/find.h>
-#include <asm-generic/bitops/sched.h>
-#include <asm-generic/bitops/hweight.h>
-#include <asm-generic/bitops/ext2-atomic-setbit.h>
-#include <asm-generic/bitops/le.h>
-
-#endif /* __KERNEL__ */
-#endif /* __ASM_BITOPS_H */

arch/mn10300/include/asm/bug.h

@@ -1,37 +0,0 @@
-/* MN10300 Kernel bug reporting
- *
- * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
- * Written by David Howells (dhowells@redhat.com)
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public Licence
- * as published by the Free Software Foundation; either version
- * 2 of the Licence, or (at your option) any later version.
- */
-#ifndef _ASM_BUG_H
-#define _ASM_BUG_H
-
-#ifdef CONFIG_BUG
-
-/*
- * Tell the user there is some problem.
- */
-#define BUG()							\
-do {								\
-	asm volatile(						\
-		"	syscall 15			\n"	\
-		"0:					\n"	\
-		"	.section __bug_table,\"aw\"	\n"	\
-		"	.long 0b,%0,%1			\n"	\
-		"	.previous			\n"	\
-		:						\
-		: "i"(__FILE__), "i"(__LINE__)			\
-		);						\
-} while (1)
-
-#define HAVE_ARCH_BUG
-#endif /* CONFIG_BUG */
-
-#include <asm-generic/bug.h>
-
-#endif /* _ASM_BUG_H */

arch/mn10300/include/asm/bugs.h

@@ -1,20 +0,0 @@
-/* MN10300 Checks for architecture-dependent bugs
- *
- * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
- * Written by David Howells (dhowells@redhat.com)
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public Licence
- * as published by the Free Software Foundation; either version
- * 2 of the Licence, or (at your option) any later version.
- */
-#ifndef _ASM_BUGS_H
-#define _ASM_BUGS_H
-
-#include <asm/processor.h>
-
-static inline void __init check_bugs(void)
-{
-}
-
-#endif /* _ASM_BUGS_H */

arch/mn10300/include/asm/busctl-regs.h

@@ -1,151 +0,0 @@
-/* AM33v2 on-board bus controller registers
- *
- * Copyright (C) 2002 Red Hat, Inc. All Rights Reserved.
- * Written by David Howells (dhowells@redhat.com)
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public Licence
- * as published by the Free Software Foundation; either version
- * 2 of the Licence, or (at your option) any later version.
- */
-
-#ifndef _ASM_BUSCTL_REGS_H
-#define _ASM_BUSCTL_REGS_H
-
-#include <asm/cpu-regs.h>
-
-#ifdef __KERNEL__
-
-/* bus controller registers */
-#define BCCR			__SYSREG(0xc0002000, u32)	/* bus controller control reg */
-#define BCCR_B0AD		0x00000003	/* block 0 (80000000-83ffffff) bus allocation */
-#define BCCR_B1AD		0x0000000c	/* block 1 (84000000-87ffffff) bus allocation */
-#define BCCR_B2AD		0x00000030	/* block 2 (88000000-8bffffff) bus allocation */
-#define BCCR_B3AD		0x000000c0	/* block 3 (8c000000-8fffffff) bus allocation */
-#define BCCR_B4AD		0x00000300	/* block 4 (90000000-93ffffff) bus allocation */
-#define BCCR_B5AD		0x00000c00	/* block 5 (94000000-97ffffff) bus allocation */
-#define BCCR_B6AD		0x00003000	/* block 6 (98000000-9bffffff) bus allocation */
-#define BCCR_B7AD		0x0000c000	/* block 7 (9c000000-9fffffff) bus allocation */
-#define BCCR_BxAD_EXBUS		0x0		/* - direct to system bus controller */
-#define BCCR_BxAD_OPEXBUS	0x1		/* - direct to memory bus controller */
-#define BCCR_BxAD_OCMBUS	0x2		/* - direct to on chip memory */
-#define BCCR_API		0x00070000	/* bus arbitration priority */
-#define BCCR_API_DMACICD	0x00000000	/* - DMA > CI > CD */
-#define BCCR_API_DMACDCI	0x00010000	/* - DMA > CD > CI */
-#define BCCR_API_CICDDMA	0x00020000	/* - CI > CD > DMA */
-#define BCCR_API_CDCIDMA	0x00030000	/* - CD > CI > DMA */
-#define BCCR_API_ROUNDROBIN	0x00040000	/* - round robin */
-#define BCCR_BEPRI_DMACICD	0x00c00000	/* bus error address priority */
-#define BCCR_BEPRI_DMACDCI	0x00000000	/* - DMA > CI > CD */
-#define BCCR_BEPRI_CICDDMA	0x00400000	/* - DMA > CD > CI */
-#define BCCR_BEPRI_CDCIDMA	0x00800000	/* - CI > CD > DMA */
-#define BCCR_BEPRI		0x00c00000	/* - CD > CI > DMA */
-#define BCCR_TMON		0x03000000	/* timeout value settings */
-#define BCCR_TMON_16IOCLK	0x00000000	/* - 16 IOCLK cycles */
-#define BCCR_TMON_256IOCLK	0x01000000	/* - 256 IOCLK cycles */
-#define BCCR_TMON_4096IOCLK	0x02000000	/* - 4096 IOCLK cycles */
-#define BCCR_TMON_65536IOCLK	0x03000000	/* - 65536 IOCLK cycles */
-#define BCCR_TMOE		0x10000000	/* timeout detection enable */
-
-#define BCBERR			__SYSREG(0xc0002010, u32)	/* bus error source reg */
-#define BCBERR_BESB		0x0000001f	/* erroneous access destination space */
-#define BCBERR_BESB_MON		0x00000001	/* - monitor space */
-#define BCBERR_BESB_IO		0x00000002	/* - IO bus */
-#define BCBERR_BESB_EX		0x00000004	/* - EX bus */
-#define BCBERR_BESB_OPEX	0x00000008	/* - OpEX bus */
-#define BCBERR_BESB_OCM		0x00000010	/* - on chip memory */
-#define BCBERR_BERW		0x00000100	/* type of access */
-#define BCBERR_BERW_WRITE	0x00000000	/* - write */
-#define BCBERR_BERW_READ	0x00000100	/* - read */
-#define BCBERR_BESD		0x00000200	/* error detector */
-#define BCBERR_BESD_BCU		0x00000000	/* - BCU detected error */
-#define BCBERR_BESD_SLAVE_BUS	0x00000200	/* - slave bus detected error */
-#define BCBERR_BEBST		0x00000400	/* type of access */
-#define BCBERR_BEBST_SINGLE	0x00000000	/* - single */
-#define BCBERR_BEBST_BURST	0x00000400	/* - burst */
-#define BCBERR_BEME		0x00000800	/* multiple bus error flag */
-#define BCBERR_BEMR		0x00007000	/* master bus that caused the error */
-#define BCBERR_BEMR_NOERROR	0x00000000	/* - no error */
-#define BCBERR_BEMR_CI		0x00001000	/* - CPU instruction fetch bus caused error */
-#define BCBERR_BEMR_CD		0x00002000	/* - CPU data bus caused error */
-#define BCBERR_BEMR_DMA		0x00004000	/* - DMA bus caused error */
-
-#define BCBEAR			__SYSREGC(0xc0002020, u32)	/* bus error address reg */
-
-/* system bus controller registers */
-#define SBBASE(X)		__SYSREG(0xd8c00100 + (X) * 0x10, u32)	/* SBC base addr regs */
-#define SBBASE_BE		0x00000001	/* bank enable */
-#define SBBASE_BAM		0x0000fffe	/* bank address mask [31:17] */
-#define SBBASE_BBA		0xfffe0000	/* bank base address [31:17] */
-
-#define SBCNTRL0(X)		__SYSREG(0xd8c00200 + (X) * 0x10, u32)	/* SBC bank ctrl0 regs */
-#define SBCNTRL0_WEH		0x00000f00	/* write enable hold */
-#define SBCNTRL0_REH		0x0000f000	/* read enable hold */
-#define SBCNTRL0_RWH		0x000f0000	/* SRW signal hold */
-#define SBCNTRL0_CSH		0x00f00000	/* chip select hold */
-#define SBCNTRL0_DAH		0x0f000000	/* data hold */
-#define SBCNTRL0_ADH		0xf0000000	/* address hold */
-
-#define SBCNTRL1(X)		__SYSREG(0xd8c00204 + (X) * 0x10, u32)	/* SBC bank ctrl1 regs */
-#define SBCNTRL1_WED		0x00000f00	/* write enable delay */
-#define SBCNTRL1_RED		0x0000f000	/* read enable delay */
-#define SBCNTRL1_RWD		0x000f0000	/* SRW signal delay */
-#define SBCNTRL1_ASW		0x00f00000	/* address strobe width */
-#define SBCNTRL1_CSD		0x0f000000	/* chip select delay */
-#define SBCNTRL1_ASD		0xf0000000	/* address strobe delay */
-
-#define SBCNTRL2(X)		__SYSREG(0xd8c00208 + (X) * 0x10, u32)	/* SBC bank ctrl2 regs */
-#define SBCNTRL2_WC		0x000000ff	/* wait count */
-#define SBCNTRL2_BWC		0x00000f00	/* burst wait count */
-#define SBCNTRL2_WM		0x01000000	/* wait mode setting */
-#define SBCNTRL2_WM_FIXEDWAIT	0x00000000	/* - fixed wait access */
-#define SBCNTRL2_WM_HANDSHAKE	0x01000000	/* - handshake access */
-#define SBCNTRL2_BM		0x02000000	/* bus synchronisation mode */
-#define SBCNTRL2_BM_SYNC	0x00000000	/* - synchronous mode */
-#define SBCNTRL2_BM_ASYNC	0x02000000	/* - asynchronous mode */
-#define SBCNTRL2_BW		0x04000000	/* bus width */
-#define SBCNTRL2_BW_32		0x00000000	/* - 32 bits */
-#define SBCNTRL2_BW_16		0x04000000	/* - 16 bits */
-#define SBCNTRL2_RWINV		0x08000000	/* R/W signal invert polarity */
-#define SBCNTRL2_RWINV_NORM	0x00000000	/* - normal (read high) */
-#define SBCNTRL2_RWINV_INV	0x08000000	/* - inverted (read low) */
-#define SBCNTRL2_BT		0x70000000	/* bus type setting */
-#define SBCNTRL2_BT_SRAM	0x00000000	/* - SRAM interface */
-#define SBCNTRL2_BT_ADMUX	0x00000000	/* - addr/data multiplexed interface */
-#define SBCNTRL2_BT_BROM	0x00000000	/* - burst ROM interface */
-#define SBCNTRL2_BTSE		0x80000000	/* burst enable */
-
-/* memory bus controller */
-#define SDBASE(X)		__SYSREG(0xda000008 + (X) * 0x4, u32)	/* MBC base addr regs */
-#define SDBASE_CE		0x00000001	/* chip enable */
-#define SDBASE_CBAM		0x0000fff0	/* chip base address mask [31:20] */
-#define SDBASE_CBAM_SHIFT	16
-#define SDBASE_CBA		0xfff00000	/* chip base address [31:20] */
-
-#define SDRAMBUS		__SYSREG(0xda000000, u32)	/* bus mode control reg */
-#define SDRAMBUS_REFEN		0x00000004	/* refresh enable */
-#define SDRAMBUS_TRC		0x00000018	/* refresh command delay time */
-#define SDRAMBUS_BSTPT		0x00000020	/* burst stop command enable */
-#define SDRAMBUS_PONSEQ		0x00000040	/* power on sequence */
-#define SDRAMBUS_SELFREQ	0x00000080	/* self-refresh mode request */
-#define SDRAMBUS_SELFON		0x00000100	/* self-refresh mode on */
-#define SDRAMBUS_SIZE		0x00030000	/* SDRAM size */
-#define SDRAMBUS_SIZE_64Mbit	0x00010000	/* 64Mbit SDRAM (x16) */
-#define SDRAMBUS_SIZE_128Mbit	0x00020000	/* 128Mbit SDRAM (x16) */
-#define SDRAMBUS_SIZE_256Mbit	0x00030000	/* 256Mbit SDRAM (x16) */
-#define SDRAMBUS_TRASWAIT	0x000c0000	/* row address precharge command cycle number */
-#define SDRAMBUS_REFNUM		0x00300000	/* refresh command number */
-#define SDRAMBUS_BSTWAIT	0x00c00000	/* burst stop command cycle */
-#define SDRAMBUS_SETWAIT	0x03000000	/* mode register setting command cycle */
-#define SDRAMBUS_PREWAIT	0x0c000000	/* precharge command cycle */
-#define SDRAMBUS_RASLATE	0x30000000	/* RAS latency */
-#define SDRAMBUS_CASLATE	0xc0000000	/* CAS latency */
-
-#define SDREFCNT		__SYSREG(0xda000004, u32)	/* refresh period reg */
-#define SDREFCNT_PERI		0x00000fff	/* refresh period */
-
-#define SDSHDW			__SYSREG(0xda000010, u32)	/* test reg */
-
-#endif /* __KERNEL__ */
-
-#endif /* _ASM_BUSCTL_REGS_H */

arch/mn10300/include/asm/cache.h

@@ -1,60 +0,0 @@
-/* MN10300 cache management registers
- *
- * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
- * Written by David Howells (dhowells@redhat.com)
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public Licence
- * as published by the Free Software Foundation; either version
- * 2 of the Licence, or (at your option) any later version.
- */
-
-#ifndef _ASM_CACHE_H
-#define _ASM_CACHE_H
-
-#include <asm/cpu-regs.h>
-#include <proc/cache.h>
-
-#ifndef __ASSEMBLY__
-#define L1_CACHE_DISPARITY	(L1_CACHE_NENTRIES * L1_CACHE_BYTES)
-#else
-#define L1_CACHE_DISPARITY	L1_CACHE_NENTRIES * L1_CACHE_BYTES
-#endif
-
-#define ARCH_DMA_MINALIGN	L1_CACHE_BYTES
-
-/* data cache purge registers
- * - read from the register to unconditionally purge that cache line
- * - write address & 0xffffff00 to conditionally purge that cache line
- *   - clear LSB to request invalidation as well
- */
-#define DCACHE_PURGE(WAY, ENTRY) \
-	__SYSREG(0xc8400000 + (WAY) * L1_CACHE_WAYDISP + \
-		 (ENTRY) * L1_CACHE_BYTES, u32)
-
-#define DCACHE_PURGE_WAY0(ENTRY) \
-	__SYSREG(0xc8400000 + 0 * L1_CACHE_WAYDISP + (ENTRY) * L1_CACHE_BYTES, u32)
-#define DCACHE_PURGE_WAY1(ENTRY) \
-	__SYSREG(0xc8400000 + 1 * L1_CACHE_WAYDISP + (ENTRY) * L1_CACHE_BYTES, u32)
-#define DCACHE_PURGE_WAY2(ENTRY) \
-	__SYSREG(0xc8400000 + 2 * L1_CACHE_WAYDISP + (ENTRY) * L1_CACHE_BYTES, u32)
-#define DCACHE_PURGE_WAY3(ENTRY) \
-	__SYSREG(0xc8400000 + 3 * L1_CACHE_WAYDISP + (ENTRY) * L1_CACHE_BYTES, u32)
-
-/* instruction cache access registers */
-#define ICACHE_DATA(WAY, ENTRY, OFF) \
-	__SYSREG(0xc8000000 + (WAY) * L1_CACHE_WAYDISP + \
-		(ENTRY) * L1_CACHE_BYTES + (OFF) * 4, u32)
-#define ICACHE_TAG(WAY, ENTRY)	 \
-	__SYSREG(0xc8100000 + (WAY) * L1_CACHE_WAYDISP + \
-		(ENTRY) * L1_CACHE_BYTES, u32)
-
-/* data cache access registers */
-#define DCACHE_DATA(WAY, ENTRY, OFF) \
-	__SYSREG(0xc8200000 + (WAY) * L1_CACHE_WAYDISP + \
-		(ENTRY) * L1_CACHE_BYTES + (OFF) * 4, u32)
-#define DCACHE_TAG(WAY, ENTRY)	 \
-	__SYSREG(0xc8300000 + (WAY) * L1_CACHE_WAYDISP + \
-		(ENTRY) * L1_CACHE_BYTES, u32)
-
-#endif /* _ASM_CACHE_H */

arch/mn10300/include/asm/cacheflush.h

@@ -1,164 +0,0 @@
-/* MN10300 Cache flushing
- *
- * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
- * Written by David Howells (dhowells@redhat.com)
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public Licence
- * as published by the Free Software Foundation; either version
- * 2 of the Licence, or (at your option) any later version.
- */
-#ifndef _ASM_CACHEFLUSH_H
-#define _ASM_CACHEFLUSH_H
-
-#ifndef __ASSEMBLY__
-
-/* Keep includes the same across arches.  */
-#include <linux/mm.h>
-
-/*
- * Primitive routines
- */
-#ifdef CONFIG_MN10300_CACHE_ENABLED
-extern void mn10300_local_icache_inv(void);
-extern void mn10300_local_icache_inv_page(unsigned long start);
-extern void mn10300_local_icache_inv_range(unsigned long start, unsigned long end);
-extern void mn10300_local_icache_inv_range2(unsigned long start, unsigned long size);
-extern void mn10300_local_dcache_inv(void);
-extern void mn10300_local_dcache_inv_page(unsigned long start);
-extern void mn10300_local_dcache_inv_range(unsigned long start, unsigned long end);
-extern void mn10300_local_dcache_inv_range2(unsigned long start, unsigned long size);
-extern void mn10300_icache_inv(void);
-extern void mn10300_icache_inv_page(unsigned long start);
-extern void mn10300_icache_inv_range(unsigned long start, unsigned long end);
-extern void mn10300_icache_inv_range2(unsigned long start, unsigned long size);
-extern void mn10300_dcache_inv(void);
-extern void mn10300_dcache_inv_page(unsigned long start);
-extern void mn10300_dcache_inv_range(unsigned long start, unsigned long end);
-extern void mn10300_dcache_inv_range2(unsigned long start, unsigned long size);
-#ifdef CONFIG_MN10300_CACHE_WBACK
-extern void mn10300_local_dcache_flush(void);
-extern void mn10300_local_dcache_flush_page(unsigned long start);
-extern void mn10300_local_dcache_flush_range(unsigned long start, unsigned long end);
-extern void mn10300_local_dcache_flush_range2(unsigned long start, unsigned long size);
-extern void mn10300_local_dcache_flush_inv(void);
-extern void mn10300_local_dcache_flush_inv_page(unsigned long start);
-extern void mn10300_local_dcache_flush_inv_range(unsigned long start, unsigned long end);
-extern void mn10300_local_dcache_flush_inv_range2(unsigned long start, unsigned long size);
-extern void mn10300_dcache_flush(void);
-extern void mn10300_dcache_flush_page(unsigned long start);
-extern void mn10300_dcache_flush_range(unsigned long start, unsigned long end);
-extern void mn10300_dcache_flush_range2(unsigned long start, unsigned long size);
-extern void mn10300_dcache_flush_inv(void);
-extern void mn10300_dcache_flush_inv_page(unsigned long start);
-extern void mn10300_dcache_flush_inv_range(unsigned long start, unsigned long end);
-extern void mn10300_dcache_flush_inv_range2(unsigned long start, unsigned long size);
-#else
-#define mn10300_local_dcache_flush()			do {} while (0)
-#define mn10300_local_dcache_flush_page(start)		do {} while (0)
-#define mn10300_local_dcache_flush_range(start, end)	do {} while (0)
-#define mn10300_local_dcache_flush_range2(start, size)	do {} while (0)
-#define mn10300_local_dcache_flush_inv() \
-		mn10300_local_dcache_inv()
-#define mn10300_local_dcache_flush_inv_page(start) \
-		mn10300_local_dcache_inv_page(start)
-#define mn10300_local_dcache_flush_inv_range(start, end) \
-		mn10300_local_dcache_inv_range(start, end)
-#define mn10300_local_dcache_flush_inv_range2(start, size) \
-		mn10300_local_dcache_inv_range2(start, size)
-#define mn10300_dcache_flush()				do {} while (0)
-#define mn10300_dcache_flush_page(start)		do {} while (0)
-#define mn10300_dcache_flush_range(start, end)		do {} while (0)
-#define mn10300_dcache_flush_range2(start, size)	do {} while (0)
-#define mn10300_dcache_flush_inv()			mn10300_dcache_inv()
-#define mn10300_dcache_flush_inv_page(start) \
-	mn10300_dcache_inv_page((start))
-#define mn10300_dcache_flush_inv_range(start, end) \
-	mn10300_dcache_inv_range((start), (end))
-#define mn10300_dcache_flush_inv_range2(start, size) \
-	mn10300_dcache_inv_range2((start), (size))
-#endif /* CONFIG_MN10300_CACHE_WBACK */
-#else
-#define mn10300_local_icache_inv()			do {} while (0)
-#define mn10300_local_icache_inv_page(start)		do {} while (0)
-#define mn10300_local_icache_inv_range(start, end)	do {} while (0)
-#define mn10300_local_icache_inv_range2(start, size)	do {} while (0)
-#define mn10300_local_dcache_inv()			do {} while (0)
-#define mn10300_local_dcache_inv_page(start)		do {} while (0)
-#define mn10300_local_dcache_inv_range(start, end)	do {} while (0)
-#define mn10300_local_dcache_inv_range2(start, size)	do {} while (0)
-#define mn10300_local_dcache_flush()			do {} while (0)
-#define mn10300_local_dcache_flush_inv_page(start)	do {} while (0)
-#define mn10300_local_dcache_flush_inv()		do {} while (0)
-#define mn10300_local_dcache_flush_inv_range(start, end)do {} while (0)
-#define mn10300_local_dcache_flush_inv_range2(start, size) do {} while (0)
-#define mn10300_local_dcache_flush_page(start)		do {} while (0)
-#define mn10300_local_dcache_flush_range(start, end)	do {} while (0)
-#define mn10300_local_dcache_flush_range2(start, size)	do {} while (0)
-#define mn10300_icache_inv()				do {} while (0)
-#define mn10300_icache_inv_page(start)			do {} while (0)
-#define mn10300_icache_inv_range(start, end)		do {} while (0)
-#define mn10300_icache_inv_range2(start, size)		do {} while (0)
-#define mn10300_dcache_inv()				do {} while (0)
-#define mn10300_dcache_inv_page(start)			do {} while (0)
-#define mn10300_dcache_inv_range(start, end)		do {} while (0)
-#define mn10300_dcache_inv_range2(start, size)		do {} while (0)
-#define mn10300_dcache_flush()				do {} while (0)
-#define mn10300_dcache_flush_inv_page(start)		do {} while (0)
-#define mn10300_dcache_flush_inv()			do {} while (0)
-#define mn10300_dcache_flush_inv_range(start, end)	do {} while (0)
-#define mn10300_dcache_flush_inv_range2(start, size)	do {} while (0)
-#define mn10300_dcache_flush_page(start)		do {} while (0)
-#define mn10300_dcache_flush_range(start, end)		do {} while (0)
-#define mn10300_dcache_flush_range2(start, size)	do {} while (0)
-#endif /* CONFIG_MN10300_CACHE_ENABLED */
-
-/*
- * Virtually-indexed cache management (our cache is physically indexed)
- */
-#define flush_cache_all()			do {} while (0)
-#define flush_cache_mm(mm)			do {} while (0)
-#define flush_cache_dup_mm(mm)			do {} while (0)
-#define flush_cache_range(mm, start, end)	do {} while (0)
-#define flush_cache_page(vma, vmaddr, pfn)	do {} while (0)
-#define flush_cache_vmap(start, end)		do {} while (0)
-#define flush_cache_vunmap(start, end)		do {} while (0)
-#define ARCH_IMPLEMENTS_FLUSH_DCACHE_PAGE 0
-#define flush_dcache_page(page)			do {} while (0)
-#define flush_dcache_mmap_lock(mapping)		do {} while (0)
-#define flush_dcache_mmap_unlock(mapping)	do {} while (0)
-
-/*
- * Physically-indexed cache management
- */
-#if defined(CONFIG_MN10300_CACHE_FLUSH_ICACHE)
-extern void flush_icache_page(struct vm_area_struct *vma, struct page *page);
-extern void flush_icache_range(unsigned long start, unsigned long end);
-#elif defined(CONFIG_MN10300_CACHE_INV_ICACHE)
-static inline void flush_icache_page(struct vm_area_struct *vma,
-				     struct page *page)
-{
-	mn10300_icache_inv_page(page_to_phys(page));
-}
-extern void flush_icache_range(unsigned long start, unsigned long end);
-#else
-#define flush_icache_range(start, end)		do {} while (0)
-#define flush_icache_page(vma, pg)		do {} while (0)
-#endif
-
-
-#define flush_icache_user_range(vma, pg, adr, len) \
-	flush_icache_range(adr, adr + len)
-
-#define copy_to_user_page(vma, page, vaddr, dst, src, len) \
-	do {					\
-		memcpy(dst, src, len);		\
-		flush_icache_page(vma, page);	\
-	} while (0)
-
-#define copy_from_user_page(vma, page, vaddr, dst, src, len) \
-	memcpy(dst, src, len)
-
-#endif /* __ASSEMBLY__ */
-
-#endif /* _ASM_CACHEFLUSH_H */

arch/mn10300/include/asm/checksum.h

@@ -1,79 +0,0 @@
-/* MN10300 Optimised checksumming code
- *
- * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
- * Written by David Howells (dhowells@redhat.com)
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public Licence
- * as published by the Free Software Foundation; either version
- * 2 of the Licence, or (at your option) any later version.
- */
-#ifndef _ASM_CHECKSUM_H
-#define _ASM_CHECKSUM_H
-
-extern __wsum csum_partial(const void *buff, int len, __wsum sum);
-extern __wsum csum_partial_copy_nocheck(const void *src, void *dst,
-					int len, __wsum sum);
-extern __wsum csum_partial_copy_from_user(const void *src, void *dst,
-					  int len, __wsum sum,
-					  int *err_ptr);
-extern __sum16 ip_fast_csum(const void *iph, unsigned int ihl);
-extern __wsum csum_partial(const void *buff, int len, __wsum sum);
-extern __sum16 ip_compute_csum(const void *buff, int len);
-
-#define csum_partial_copy_fromuser csum_partial_copy
-extern __wsum csum_partial_copy(const void *src, void *dst, int len,
-				__wsum sum);
-
-static inline __sum16 csum_fold(__wsum sum)
-{
-	asm(
-		"	add	%1,%0		\n"
-		"	addc	0xffff,%0	\n"
-		: "=r" (sum)
-		: "r" (sum << 16), "0" (sum & 0xffff0000)
-		: "cc"
-	    );
-	return (~sum) >> 16;
-}
-
-static inline __wsum csum_tcpudp_nofold(__be32 saddr, __be32 daddr,
-					__u32 len, __u8 proto,
-					__wsum sum)
-{
-	__wsum tmp = (__wsum)((len + proto) << 8);
-
-	asm(
-		"	add	%1,%0		\n"
-		"	addc	%2,%0		\n"
-		"	addc	%3,%0		\n"
-		"	addc	0,%0		\n"
-		: "=r" (sum)
-		: "r" (daddr), "r"(saddr), "r"(tmp), "0"(sum)
-		: "cc"
-	    );
-	return sum;
-}
-
-/*
- * computes the checksum of the TCP/UDP pseudo-header
- * returns a 16-bit checksum, already complemented
- */
-static inline __sum16 csum_tcpudp_magic(__be32 saddr, __be32 daddr,
-					__u32 len, __u8 proto,
-					__wsum sum)
-{
-	return csum_fold(csum_tcpudp_nofold(saddr, daddr, len, proto, sum));
-}
-
-#undef _HAVE_ARCH_IPV6_CSUM
-
-/*
- *	Copy and checksum to user
- */
-#define HAVE_CSUM_COPY_USER
-extern __wsum csum_and_copy_to_user(const void *src, void *dst, int len,
-				    __wsum sum, int *err_ptr);
-
-
-#endif /* _ASM_CHECKSUM_H */

arch/mn10300/include/asm/cmpxchg.h

@@ -1,115 +0,0 @@
-/* MN10300 Atomic xchg/cmpxchg operations
- *
- * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
- * Written by David Howells (dhowells@redhat.com)
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public Licence
- * as published by the Free Software Foundation; either version
- * 2 of the Licence, or (at your option) any later version.
- */
-#ifndef _ASM_CMPXCHG_H
-#define _ASM_CMPXCHG_H
-
-#include <asm/irqflags.h>
-
-#ifdef CONFIG_SMP
-#ifdef CONFIG_MN10300_HAS_ATOMIC_OPS_UNIT
-static inline
-unsigned long __xchg(volatile unsigned long *m, unsigned long val)
-{
-	unsigned long status;
-	unsigned long oldval;
-
-	asm volatile(
-		"1:	mov	%4,(_AAR,%3)	\n"
-		"	mov	(_ADR,%3),%1	\n"
-		"	mov	%5,(_ADR,%3)	\n"
-		"	mov	(_ADR,%3),%0	\n"	/* flush */
-		"	mov	(_ASR,%3),%0	\n"
-		"	or	%0,%0		\n"
-		"	bne	1b		\n"
-		: "=&r"(status), "=&r"(oldval), "=m"(*m)
-		: "a"(ATOMIC_OPS_BASE_ADDR), "r"(m), "r"(val)
-		: "memory", "cc");
-
-	return oldval;
-}
-
-static inline unsigned long __cmpxchg(volatile unsigned long *m,
-				      unsigned long old, unsigned long new)
-{
-	unsigned long status;
-	unsigned long oldval;
-
-	asm volatile(
-		"1:	mov	%4,(_AAR,%3)	\n"
-		"	mov	(_ADR,%3),%1	\n"
-		"	cmp	%5,%1		\n"
-		"	bne	2f		\n"
-		"	mov	%6,(_ADR,%3)	\n"
-		"2:	mov	(_ADR,%3),%0	\n"	/* flush */
-		"	mov	(_ASR,%3),%0	\n"
-		"	or	%0,%0		\n"
-		"	bne	1b		\n"
-		: "=&r"(status), "=&r"(oldval), "=m"(*m)
-		: "a"(ATOMIC_OPS_BASE_ADDR), "r"(m),
-		  "r"(old), "r"(new)
-		: "memory", "cc");
-
-	return oldval;
-}
-#else  /* CONFIG_MN10300_HAS_ATOMIC_OPS_UNIT */
-#error "No SMP atomic operation support!"
-#endif /* CONFIG_MN10300_HAS_ATOMIC_OPS_UNIT */
-
-#else  /* CONFIG_SMP */
-
-/*
- * Emulate xchg for non-SMP MN10300
- */
-struct __xchg_dummy { unsigned long a[100]; };
-#define __xg(x) ((struct __xchg_dummy *)(x))
-
-static inline
-unsigned long __xchg(volatile unsigned long *m, unsigned long val)
-{
-	unsigned long oldval;
-	unsigned long flags;
-
-	flags = arch_local_cli_save();
-	oldval = *m;
-	*m = val;
-	arch_local_irq_restore(flags);
-	return oldval;
-}
-
-/*
- * Emulate cmpxchg for non-SMP MN10300
- */
-static inline unsigned long __cmpxchg(volatile unsigned long *m,
-				      unsigned long old, unsigned long new)
-{
-	unsigned long oldval;
-	unsigned long flags;
-
-	flags = arch_local_cli_save();
-	oldval = *m;
-	if (oldval == old)
-		*m = new;
-	arch_local_irq_restore(flags);
-	return oldval;
-}
-
-#endif /* CONFIG_SMP */
-
-#define xchg(ptr, v)						\
-	((__typeof__(*(ptr))) __xchg((unsigned long *)(ptr),	\
-				     (unsigned long)(v)))
-
-#define cmpxchg(ptr, o, n)					\
-	((__typeof__(*(ptr))) __cmpxchg((unsigned long *)(ptr), \
-					(unsigned long)(o),	\
-					(unsigned long)(n)))
-
-#endif /* _ASM_CMPXCHG_H */

arch/mn10300/include/asm/cpu-regs.h

@@ -1,353 +0,0 @@
-/* MN10300 Core system registers
- *
- * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
- * Written by David Howells (dhowells@redhat.com)
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public Licence
- * as published by the Free Software Foundation; either version
- * 2 of the Licence, or (at your option) any later version.
- */
-#ifndef _ASM_CPU_REGS_H
-#define _ASM_CPU_REGS_H
-
-#ifndef __ASSEMBLY__
-#include <linux/types.h>
-#endif
-
-/* we tell the compiler to pretend to be AM33 so that it doesn't try and use
- * the FP regs, but tell the assembler that we're actually allowed AM33v2
- * instructions */
-#ifndef __ASSEMBLY__
-asm(" .am33_2\n");
-#else
-.am33_2
-#endif
-
-#ifdef __KERNEL__
-
-#ifndef __ASSEMBLY__
-#define __SYSREG(ADDR, TYPE) (*(volatile TYPE *)(ADDR))
-#define __SYSREGC(ADDR, TYPE) (*(const volatile TYPE *)(ADDR))
-#else
-#define __SYSREG(ADDR, TYPE) ADDR
-#define __SYSREGC(ADDR, TYPE) ADDR
-#endif
-
-/* CPU registers */
-#define EPSW_FLAG_Z		0x00000001	/* zero flag */
-#define EPSW_FLAG_N		0x00000002	/* negative flag */
-#define EPSW_FLAG_C		0x00000004	/* carry flag */
-#define EPSW_FLAG_V		0x00000008	/* overflow flag */
-#define EPSW_IM			0x00000700	/* interrupt mode */
-#define EPSW_IM_0		0x00000000	/* interrupt mode 0 */
-#define EPSW_IM_1		0x00000100	/* interrupt mode 1 */
-#define EPSW_IM_2		0x00000200	/* interrupt mode 2 */
-#define EPSW_IM_3		0x00000300	/* interrupt mode 3 */
-#define EPSW_IM_4		0x00000400	/* interrupt mode 4 */
-#define EPSW_IM_5		0x00000500	/* interrupt mode 5 */
-#define EPSW_IM_6		0x00000600	/* interrupt mode 6 */
-#define EPSW_IM_7		0x00000700	/* interrupt mode 7 */
-#define EPSW_IE			0x00000800	/* interrupt enable */
-#define EPSW_S			0x00003000	/* software auxiliary bits */
-#define EPSW_T			0x00008000	/* trace enable */
-#define EPSW_nSL		0x00010000	/* not supervisor level */
-#define EPSW_NMID		0x00020000	/* nonmaskable interrupt disable */
-#define EPSW_nAR		0x00040000	/* register bank control */
-#define EPSW_ML			0x00080000	/* monitor level */
-#define EPSW_FE			0x00100000	/* FPU enable */
-#define EPSW_IM_SHIFT		8		/* EPSW_IM_SHIFT determines the interrupt mode */
-
-#define NUM2EPSW_IM(num)	((num) << EPSW_IM_SHIFT)
-
-/* FPU registers */
-#define FPCR_EF_I		0x00000001	/* inexact result FPU exception flag */
-#define FPCR_EF_U		0x00000002	/* underflow FPU exception flag */
-#define FPCR_EF_O		0x00000004	/* overflow FPU exception flag */
-#define FPCR_EF_Z		0x00000008	/* zero divide FPU exception flag */
-#define FPCR_EF_V		0x00000010	/* invalid operand FPU exception flag */
-#define FPCR_EE_I		0x00000020	/* inexact result FPU exception enable */
-#define FPCR_EE_U		0x00000040	/* underflow FPU exception enable */
-#define FPCR_EE_O		0x00000080	/* overflow FPU exception enable */
-#define FPCR_EE_Z		0x00000100	/* zero divide FPU exception enable */
-#define FPCR_EE_V		0x00000200	/* invalid operand FPU exception enable */
-#define FPCR_EC_I		0x00000400	/* inexact result FPU exception cause */
-#define FPCR_EC_U		0x00000800	/* underflow FPU exception cause */
-#define FPCR_EC_O		0x00001000	/* overflow FPU exception cause */
-#define FPCR_EC_Z		0x00002000	/* zero divide FPU exception cause */
-#define FPCR_EC_V		0x00004000	/* invalid operand FPU exception cause */
-#define FPCR_RM			0x00030000	/* rounding mode */
-#define FPCR_RM_NEAREST		0x00000000	/* - round to nearest value */
-#define FPCR_FCC_U		0x00040000	/* FPU unordered condition code */
-#define FPCR_FCC_E		0x00080000	/* FPU equal condition code */
-#define FPCR_FCC_G		0x00100000	/* FPU greater than condition code */
-#define FPCR_FCC_L		0x00200000	/* FPU less than condition code */
-#define FPCR_INIT		0x00000000	/* no exceptions, rounding to nearest */
-
-/* CPU control registers */
-#define CPUP			__SYSREG(0xc0000020, u16)	/* CPU pipeline register */
-#define CPUP_DWBD		0x0020		/* write buffer disable flag */
-#define CPUP_IPFD		0x0040		/* instruction prefetch disable flag */
-#define CPUP_EXM		0x0080		/* exception operation mode */
-#define CPUP_EXM_AM33V1		0x0000		/* - AM33 v1 exception mode */
-#define CPUP_EXM_AM33V2		0x0080		/* - AM33 v2 exception mode */
-
-#define CPUM			__SYSREG(0xc0000040, u16)	/* CPU mode register */
-#define CPUM_SLEEP		0x0004		/* set to enter sleep state */
-#define CPUM_HALT		0x0008		/* set to enter halt state */
-#define CPUM_STOP		0x0010		/* set to enter stop state */
-
-#define CPUREV			__SYSREGC(0xc0000050, u32)	/* CPU revision register */
-#define CPUREV_TYPE		0x0000000f	/* CPU type */
-#define CPUREV_TYPE_S		0
-#define CPUREV_TYPE_AM33_1	0x00000000	/* - AM33-1 core, AM33/1.00 arch */
-#define CPUREV_TYPE_AM33_2	0x00000001	/* - AM33-2 core, AM33/2.00 arch */
-#define CPUREV_TYPE_AM34_1	0x00000002	/* - AM34-1 core, AM33/2.00 arch */
-#define CPUREV_TYPE_AM33_3	0x00000003	/* - AM33-3 core, AM33/2.00 arch */
-#define CPUREV_TYPE_AM34_2	0x00000004	/* - AM34-2 core, AM33/3.00 arch */
-#define CPUREV_REVISION		0x000000f0	/* CPU revision */
-#define CPUREV_REVISION_S	4
-#define CPUREV_ICWAY		0x00000f00	/* number of instruction cache ways */
-#define CPUREV_ICWAY_S		8
-#define CPUREV_ICSIZE		0x0000f000	/* instruction cache way size */
-#define CPUREV_ICSIZE_S		12
-#define CPUREV_DCWAY		0x000f0000	/* number of data cache ways */
-#define CPUREV_DCWAY_S		16
-#define CPUREV_DCSIZE		0x00f00000	/* data cache way size */
-#define CPUREV_DCSIZE_S		20
-#define CPUREV_FPUTYPE		0x0f000000	/* FPU core type */
-#define CPUREV_FPUTYPE_NONE	0x00000000	/* - no FPU core implemented */
-#define CPUREV_OCDCTG		0xf0000000	/* on-chip debug function category */
-
-#define DCR			__SYSREG(0xc0000030, u16)	/* Debug control register */
-
-/* interrupt/exception control registers */
-#define IVAR0			__SYSREG(0xc0000000, u16)	/* interrupt vector 0 */
-#define IVAR1			__SYSREG(0xc0000004, u16)	/* interrupt vector 1 */
-#define IVAR2			__SYSREG(0xc0000008, u16)	/* interrupt vector 2 */
-#define IVAR3			__SYSREG(0xc000000c, u16)	/* interrupt vector 3 */
-#define IVAR4			__SYSREG(0xc0000010, u16)	/* interrupt vector 4 */
-#define IVAR5			__SYSREG(0xc0000014, u16)	/* interrupt vector 5 */
-#define IVAR6			__SYSREG(0xc0000018, u16)	/* interrupt vector 6 */
-
-#define TBR			__SYSREG(0xc0000024, u32)	/* Trap table base */
-#define TBR_TB			0xff000000	/* table base address bits 31-24 */
-#define TBR_INT_CODE		0x00ffffff	/* interrupt code */
-
-#define DEAR			__SYSREG(0xc0000038, u32)	/* Data access exception address */
-
-#define sISR			__SYSREG(0xc0000044, u32)	/* Supervisor interrupt status */
-#define	sISR_IRQICE		0x00000001	/* ICE interrupt */
-#define	sISR_ISTEP		0x00000002	/* single step interrupt */
-#define	sISR_MISSA		0x00000004	/* memory access address misalignment fault */
-#define	sISR_UNIMP		0x00000008	/* unimplemented instruction execution fault */
-#define	sISR_PIEXE		0x00000010	/* program interrupt */
-#define	sISR_MEMERR		0x00000020	/* illegal memory access fault */
-#define	sISR_IBREAK		0x00000040	/* instraction break interrupt */
-#define	sISR_DBSRL		0x00000080	/* debug serial interrupt */
-#define	sISR_PERIDB		0x00000100	/* peripheral debug interrupt */
-#define	sISR_EXUNIMP		0x00000200	/* unimplemented ex-instruction execution fault */
-#define	sISR_OBREAK		0x00000400	/* operand break interrupt */
-#define	sISR_PRIV		0x00000800	/* privileged instruction execution fault */
-#define	sISR_BUSERR		0x00001000	/* bus error fault */
-#define	sISR_DBLFT		0x00002000	/* double fault */
-#define	sISR_DBG		0x00008000	/* debug reserved interrupt */
-#define sISR_ITMISS		0x00010000	/* instruction TLB miss */
-#define sISR_DTMISS		0x00020000	/* data TLB miss */
-#define sISR_ITEX		0x00040000	/* instruction TLB access exception */
-#define sISR_DTEX		0x00080000	/* data TLB access exception */
-#define sISR_ILGIA		0x00100000	/* illegal instruction access exception */
-#define sISR_ILGDA		0x00200000	/* illegal data access exception */
-#define sISR_IOIA		0x00400000	/* internal I/O space instruction access excep */
-#define sISR_PRIVA		0x00800000	/* privileged space instruction access excep */
-#define sISR_PRIDA		0x01000000	/* privileged space data access excep */
-#define sISR_DISA		0x02000000	/* data space instruction access excep */
-#define sISR_SYSC		0x04000000	/* system call instruction excep */
-#define sISR_FPUD		0x08000000	/* FPU disabled excep */
-#define sISR_FPUUI		0x10000000	/* FPU unimplemented instruction excep */
-#define sISR_FPUOP		0x20000000	/* FPU operation excep */
-#define sISR_NE			0x80000000	/* multiple synchronous exceptions excep */
-
-/* cache control registers */
-#define CHCTR			__SYSREG(0xc0000070, u16)	/* cache control */
-#define CHCTR_ICEN		0x0001		/* instruction cache enable */
-#define CHCTR_DCEN		0x0002		/* data cache enable */
-#define CHCTR_ICBUSY		0x0004		/* instruction cache busy */
-#define CHCTR_DCBUSY		0x0008		/* data cache busy */
-#define CHCTR_ICINV		0x0010		/* instruction cache invalidate */
-#define CHCTR_DCINV		0x0020		/* data cache invalidate */
-#define CHCTR_DCWTMD		0x0040		/* data cache writing mode */
-#define CHCTR_DCWTMD_WRBACK	0x0000		/* - write back mode */
-#define CHCTR_DCWTMD_WRTHROUGH	0x0040		/* - write through mode */
-#define CHCTR_DCALMD		0x0080		/* data cache allocation mode */
-#define CHCTR_ICWMD		0x0f00		/* instruction cache way mode */
-#define CHCTR_DCWMD		0xf000		/* data cache way mode */
-
-#ifdef CONFIG_AM34_2
-#define ICIVCR			__SYSREG(0xc0000c00, u32)	/* icache area invalidate control */
-#define ICIVCR_ICIVBSY		0x00000008			/* icache area invalidate busy */
-#define ICIVCR_ICI		0x00000001			/* icache area invalidate */
-
-#define ICIVMR			__SYSREG(0xc0000c04, u32)	/* icache area invalidate mask */
-
-#define	DCPGCR			__SYSREG(0xc0000c10, u32)	/* data cache area purge control */
-#define	DCPGCR_DCPGBSY		0x00000008			/* data cache area purge busy */
-#define	DCPGCR_DCP		0x00000002			/* data cache area purge */
-#define	DCPGCR_DCI		0x00000001			/* data cache area invalidate */
-
-#define	DCPGMR			__SYSREG(0xc0000c14, u32)	/* data cache area purge mask */
-#endif /* CONFIG_AM34_2 */
-
-/* MMU control registers */
-#define MMUCTR			__SYSREG(0xc0000090, u32)	/* MMU control register */
-#define MMUCTR_IRP		0x0000003f	/* instruction TLB replace pointer */
-#define MMUCTR_ITE		0x00000040	/* instruction TLB enable */
-#define MMUCTR_IIV		0x00000080	/* instruction TLB invalidate */
-#define MMUCTR_ITL		0x00000700	/* instruction TLB lock pointer */
-#define MMUCTR_ITL_NOLOCK	0x00000000	/* - no lock */
-#define MMUCTR_ITL_LOCK0	0x00000100	/* - entry 0 locked */
-#define MMUCTR_ITL_LOCK0_1	0x00000200	/* - entry 0-1 locked */
-#define MMUCTR_ITL_LOCK0_3	0x00000300	/* - entry 0-3 locked */
-#define MMUCTR_ITL_LOCK0_7	0x00000400	/* - entry 0-7 locked */
-#define MMUCTR_ITL_LOCK0_15	0x00000500	/* - entry 0-15 locked */
-#define MMUCTR_CE		0x00008000	/* cacheable bit enable */
-#define MMUCTR_DRP		0x003f0000	/* data TLB replace pointer */
-#define MMUCTR_DTE		0x00400000	/* data TLB enable */
-#define MMUCTR_DIV		0x00800000	/* data TLB invalidate */
-#define MMUCTR_DTL		0x07000000	/* data TLB lock pointer */
-#define MMUCTR_DTL_NOLOCK	0x00000000	/* - no lock */
-#define MMUCTR_DTL_LOCK0	0x01000000	/* - entry 0 locked */
-#define MMUCTR_DTL_LOCK0_1	0x02000000	/* - entry 0-1 locked */
-#define MMUCTR_DTL_LOCK0_3	0x03000000	/* - entry 0-3 locked */
-#define MMUCTR_DTL_LOCK0_7	0x04000000	/* - entry 0-7 locked */
-#define MMUCTR_DTL_LOCK0_15	0x05000000	/* - entry 0-15 locked */
-#ifdef CONFIG_AM34_2
-#define MMUCTR_WTE		0x80000000	/* write-through cache TLB entry bit enable */
-#endif
-
-#define PIDR			__SYSREG(0xc0000094, u16)	/* PID register */
-#define PIDR_PID		0x00ff		/* process identifier */
-
-#define PTBR			__SYSREG(0xc0000098, unsigned long) /* Page table base register */
-
-#define IPTEL			__SYSREG(0xc00000a0, u32)	/* instruction TLB entry */
-#define DPTEL			__SYSREG(0xc00000b0, u32)	/* data TLB entry */
-#define xPTEL_V			0x00000001	/* TLB entry valid */
-#define xPTEL_UNUSED1		0x00000002	/* unused bit */
-#define xPTEL_UNUSED2		0x00000004	/* unused bit */
-#define xPTEL_C			0x00000008	/* cached if set */
-#define xPTEL_PV		0x00000010	/* page valid */
-#define xPTEL_D			0x00000020	/* dirty */
-#define xPTEL_PR		0x000001c0	/* page protection */
-#define xPTEL_PR_ROK		0x00000000	/* - R/O kernel */
-#define xPTEL_PR_RWK		0x00000100	/* - R/W kernel */
-#define xPTEL_PR_ROK_ROU	0x00000080	/* - R/O kernel and R/O user */
-#define xPTEL_PR_RWK_ROU	0x00000180	/* - R/W kernel and R/O user */
-#define xPTEL_PR_RWK_RWU	0x000001c0	/* - R/W kernel and R/W user */
-#define xPTEL_G			0x00000200	/* global (use PID if 0) */
-#define xPTEL_PS		0x00000c00	/* page size */
-#define xPTEL_PS_4Kb		0x00000000	/* - 4Kb page */
-#define xPTEL_PS_128Kb		0x00000400	/* - 128Kb page */
-#define xPTEL_PS_1Kb		0x00000800	/* - 1Kb page */
-#define xPTEL_PS_4Mb		0x00000c00	/* - 4Mb page */
-#define xPTEL_PPN		0xfffff006	/* physical page number */
-
-#define IPTEU			__SYSREG(0xc00000a4, u32)	/* instruction TLB virtual addr */
-#define DPTEU			__SYSREG(0xc00000b4, u32)	/* data TLB virtual addr */
-#define xPTEU_VPN		0xfffffc00	/* virtual page number */
-#define xPTEU_PID		0x000000ff	/* process identifier to which applicable */
-
-#define IPTEL2			__SYSREG(0xc00000a8, u32)	/* instruction TLB entry */
-#define DPTEL2			__SYSREG(0xc00000b8, u32)	/* data TLB entry */
-#define xPTEL2_V		0x00000001	/* TLB entry valid */
-#define xPTEL2_C		0x00000002	/* cacheable */
-#define xPTEL2_PV		0x00000004	/* page valid */
-#define xPTEL2_D		0x00000008	/* dirty */
-#define xPTEL2_PR		0x00000070	/* page protection */
-#define xPTEL2_PR_ROK		0x00000000	/* - R/O kernel */
-#define xPTEL2_PR_RWK		0x00000040	/* - R/W kernel */
-#define xPTEL2_PR_ROK_ROU	0x00000020	/* - R/O kernel and R/O user */
-#define xPTEL2_PR_RWK_ROU	0x00000060	/* - R/W kernel and R/O user */
-#define xPTEL2_PR_RWK_RWU	0x00000070	/* - R/W kernel and R/W user */
-#define xPTEL2_G		0x00000080	/* global (use PID if 0) */
-#define xPTEL2_PS		0x00000300	/* page size */
-#define xPTEL2_PS_4Kb		0x00000000	/* - 4Kb page */
-#define xPTEL2_PS_128Kb		0x00000100	/* - 128Kb page */
-#define xPTEL2_PS_1Kb		0x00000200	/* - 1Kb page */
-#define xPTEL2_PS_4Mb		0x00000300	/* - 4Mb page */
-#define xPTEL2_CWT		0x00000400	/* cacheable write-through */
-#define xPTEL2_UNUSED1		0x00000800	/* unused bit (broadcast mask) */
-#define xPTEL2_PPN		0xfffff000	/* physical page number */
-
-#define xPTEL2_V_BIT		0	/* bit numbers corresponding to above masks */
-#define xPTEL2_C_BIT		1
-#define xPTEL2_PV_BIT		2
-#define xPTEL2_D_BIT		3
-#define xPTEL2_G_BIT		7
-#define xPTEL2_UNUSED1_BIT	11
-
-#define MMUFCR			__SYSREGC(0xc000009c, u32)	/* MMU exception cause */
-#define MMUFCR_IFC		__SYSREGC(0xc000009c, u16)	/* MMU instruction excep cause */
-#define MMUFCR_DFC		__SYSREGC(0xc000009e, u16)	/* MMU data exception cause */
-#define MMUFCR_xFC_TLBMISS	0x0001		/* TLB miss flag */
-#define MMUFCR_xFC_INITWR	0x0002		/* initial write excep flag */
-#define MMUFCR_xFC_PGINVAL	0x0004		/* page invalid excep flag */
-#define MMUFCR_xFC_PROTVIOL	0x0008		/* protection violation excep flag */
-#define MMUFCR_xFC_ACCESS	0x0010		/* access level flag */
-#define MMUFCR_xFC_ACCESS_USR	0x0000		/* - user mode */
-#define MMUFCR_xFC_ACCESS_SR	0x0010		/* - supervisor mode */
-#define MMUFCR_xFC_TYPE		0x0020		/* access type flag */
-#define MMUFCR_xFC_TYPE_READ	0x0000		/* - read */
-#define MMUFCR_xFC_TYPE_WRITE	0x0020		/* - write */
-#define MMUFCR_xFC_PR		0x01c0		/* page protection flag */
-#define MMUFCR_xFC_PR_ROK	0x0000		/* - R/O kernel */
-#define MMUFCR_xFC_PR_RWK	0x0100		/* - R/W kernel */
-#define MMUFCR_xFC_PR_ROK_ROU	0x0080		/* - R/O kernel and R/O user */
-#define MMUFCR_xFC_PR_RWK_ROU	0x0180		/* - R/W kernel and R/O user */
-#define MMUFCR_xFC_PR_RWK_RWU	0x01c0		/* - R/W kernel and R/W user */
-#define MMUFCR_xFC_ILLADDR	0x0200		/* illegal address excep flag */
-
-#ifdef CONFIG_MN10300_HAS_ATOMIC_OPS_UNIT
-/* atomic operation registers */
-#define AAR		__SYSREG(0xc0000a00, u32)	/* cacheable address */
-#define AAR2		__SYSREG(0xc0000a04, u32)	/* uncacheable address */
-#define ADR		__SYSREG(0xc0000a08, u32)	/* data */
-#define ASR		__SYSREG(0xc0000a0c, u32)	/* status */
-#define AARU		__SYSREG(0xd400aa00, u32)	/* user address */
-#define ADRU		__SYSREG(0xd400aa08, u32)	/* user data */
-#define ASRU		__SYSREG(0xd400aa0c, u32)	/* user status */
-
-#define ASR_RW		0x00000008	/* read */
-#define ASR_BW		0x00000004	/* bus error */
-#define ASR_IW		0x00000002	/* interrupt */
-#define ASR_LW		0x00000001	/* bus lock */
-
-#define ASRU_RW		ASR_RW		/* read */
-#define ASRU_BW		ASR_BW		/* bus error */
-#define ASRU_IW		ASR_IW		/* interrupt */
-#define ASRU_LW		ASR_LW		/* bus lock */
-
-/* in inline ASM, we stick the base pointer in to a reg and use offsets from
- * it */
-#define ATOMIC_OPS_BASE_ADDR 0xc0000a00
-#ifndef __ASSEMBLY__
-asm(
-	"_AAR	= 0\n"
-	"_AAR2	= 4\n"
-	"_ADR	= 8\n"
-	"_ASR	= 12\n");
-#else
-#define _AAR		0
-#define _AAR2		4
-#define _ADR		8
-#define _ASR		12
-#endif
-
-/* physical page address for userspace atomic operations registers */
-#define USER_ATOMIC_OPS_PAGE_ADDR  0xd400a000
-
-#endif /* CONFIG_MN10300_HAS_ATOMIC_OPS_UNIT */
-
-#endif /* __KERNEL__ */
-
-#endif /* _ASM_CPU_REGS_H */

arch/mn10300/include/asm/current.h

@@ -1,37 +0,0 @@
-/* MN10300 Current task structure accessor
- *
- * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
- * Written by David Howells (dhowells@redhat.com)
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public Licence
- * as published by the Free Software Foundation; either version
- * 2 of the Licence, or (at your option) any later version.
- */
-#ifndef _ASM_CURRENT_H
-#define _ASM_CURRENT_H
-
-#include <linux/thread_info.h>
-
-/*
- * dedicate E2 to keeping the current task pointer
- */
-#ifdef CONFIG_MN10300_CURRENT_IN_E2
-
-register struct task_struct *const current asm("e2") __attribute__((used));
-
-#define get_current() current
-
-extern struct task_struct *__current;
-
-#else
-static inline __attribute__((const))
-struct task_struct *get_current(void)
-{
-	return current_thread_info()->task;
-}
-
-#define current get_current()
-#endif
-
-#endif /* _ASM_CURRENT_H */

arch/mn10300/include/asm/debugger.h

@@ -1,43 +0,0 @@
-/* Kernel debugger for MN10300
- *
- * Copyright (C) 2011 Red Hat, Inc. All Rights Reserved.
- * Written by David Howells (dhowells@redhat.com)
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public Licence
- * as published by the Free Software Foundation; either version
- * 2 of the Licence, or (at your option) any later version.
- */
-
-#ifndef _ASM_DEBUGGER_H
-#define _ASM_DEBUGGER_H
-
-#if defined(CONFIG_KERNEL_DEBUGGER)
-
-extern int debugger_intercept(enum exception_code, int, int, struct pt_regs *);
-extern int at_debugger_breakpoint(struct pt_regs *);
-
-#ifndef CONFIG_MN10300_DEBUGGER_CACHE_NO_FLUSH
-extern void debugger_local_cache_flushinv(void);
-extern void debugger_local_cache_flushinv_one(u8 *);
-#else
-static inline void debugger_local_cache_flushinv(void) {}
-static inline void debugger_local_cache_flushinv_one(u8 *addr) {}
-#endif
-
-#else /* CONFIG_KERNEL_DEBUGGER */
-
-static inline int debugger_intercept(enum exception_code excep,
-				     int signo, int si_code,
-				     struct pt_regs *regs)
-{
-	return 0;
-}
-
-static inline int at_debugger_breakpoint(struct pt_regs *regs)
-{
-	return 0;
-}
-
-#endif /* CONFIG_KERNEL_DEBUGGER */
-#endif /* _ASM_DEBUGGER_H */

arch/mn10300/include/asm/delay.h

@@ -1,19 +0,0 @@
-/* MN10300 Uninterruptible delay routines
- *
- * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
- * Written by David Howells (dhowells@redhat.com)
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public Licence
- * as published by the Free Software Foundation; either version
- * 2 of the Licence, or (at your option) any later version.
- */
-#ifndef _ASM_DELAY_H
-#define _ASM_DELAY_H
-
-extern void __udelay(unsigned long usecs);
-extern void __delay(unsigned long loops);
-
-#define udelay(n) __udelay(n)
-
-#endif /* _ASM_DELAY_H */

arch/mn10300/include/asm/div64.h

@@ -1,115 +0,0 @@
-/* MN10300 64-bit division
- *
- * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
- * Written by David Howells (dhowells@redhat.com)
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public Licence
- * as published by the Free Software Foundation; either version
- * 2 of the Licence, or (at your option) any later version.
- */
-#ifndef _ASM_DIV64
-#define _ASM_DIV64
-
-#include <linux/types.h>
-
-extern void ____unhandled_size_in_do_div___(void);
-
-/*
- * Beginning with gcc 4.6, the MDR register is represented explicitly.  We
- * must, therefore, at least explicitly clobber the register when we make
- * changes to it.  The following assembly fragments *could* be rearranged in
- * order to leave the moves to/from the MDR register to the compiler, but the
- * gains would be minimal at best.
- */
-#if __GNUC__ > 4 || (__GNUC__ == 4 && __GNUC_MINOR__ >= 6)
-# define CLOBBER_MDR_CC		"mdr", "cc"
-#else
-# define CLOBBER_MDR_CC		"cc"
-#endif
-
-/*
- * divide n by base, leaving the result in n and returning the remainder
- * - we can do this quite efficiently on the MN10300 by cascading the divides
- *   through the MDR register
- */
-#define do_div(n, base)							\
-({									\
-	unsigned __rem = 0;						\
-	if (sizeof(n) <= 4) {						\
-		asm("mov	%1,mdr	\n"				\
-		    "divu	%2,%0	\n"				\
-		    "mov	mdr,%1	\n"				\
-		    : "+r"(n), "=d"(__rem)				\
-		    : "r"(base), "1"(__rem)				\
-		    : CLOBBER_MDR_CC					\
-		    );							\
-	} else if (sizeof(n) <= 8) {					\
-		union {							\
-			unsigned long long l;				\
-			u32 w[2];					\
-		} __quot;						\
-		__quot.l = n;						\
-		asm("mov	%0,mdr	\n"	/* MDR = 0 */		\
-		    "divu	%3,%1	\n"				\
-		    /* __quot.MSL = __div.MSL / base, */		\
-		    /* MDR = MDR:__div.MSL % base */			\
-		    "divu	%3,%2	\n"				\
-		    /* __quot.LSL = MDR:__div.LSL / base, */		\
-		    /* MDR = MDR:__div.LSL % base */			\
-		    "mov	mdr,%0	\n"				\
-		    : "=d"(__rem), "=r"(__quot.w[1]), "=r"(__quot.w[0])	\
-		    : "r"(base), "0"(__rem), "1"(__quot.w[1]),		\
-		      "2"(__quot.w[0])					\
-		    : CLOBBER_MDR_CC					\
-		    );							\
-		n = __quot.l;						\
-	} else {							\
-		____unhandled_size_in_do_div___();			\
-	}								\
-	__rem;								\
-})
-
-/*
- * do an unsigned 32-bit multiply and divide with intermediate 64-bit product
- * so as not to lose accuracy
- * - we use the MDR register to hold the MSW of the product
- */
-static inline __attribute__((const))
-unsigned __muldiv64u(unsigned val, unsigned mult, unsigned div)
-{
-	unsigned result;
-
-	asm("mulu	%2,%0	\n"	/* MDR:val = val*mult */
-	    "divu	%3,%0	\n"	/* val = MDR:val/div;
-					 * MDR = MDR:val%div */
-	    : "=r"(result)
-	    : "0"(val), "ir"(mult), "r"(div)
-	    : CLOBBER_MDR_CC
-	    );
-
-	return result;
-}
-
-/*
- * do a signed 32-bit multiply and divide with intermediate 64-bit product so
- * as not to lose accuracy
- * - we use the MDR register to hold the MSW of the product
- */
-static inline __attribute__((const))
-signed __muldiv64s(signed val, signed mult, signed div)
-{
-	signed result;
-
-	asm("mul	%2,%0	\n"	/* MDR:val = val*mult */
-	    "div	%3,%0	\n"	/* val = MDR:val/div;
-					 * MDR = MDR:val%div */
-	    : "=r"(result)
-	    : "0"(val), "ir"(mult), "r"(div)
-	    : CLOBBER_MDR_CC
-	    );
-
-	return result;
-}
-
-#endif /* _ASM_DIV64 */

arch/mn10300/include/asm/dma-mapping.h

@@ -1,21 +0,0 @@
-/* DMA mapping routines for the MN10300 arch
- *
- * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
- * Written by David Howells (dhowells@redhat.com)
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public Licence
- * as published by the Free Software Foundation; either version
- * 2 of the Licence, or (at your option) any later version.
- */
-#ifndef _ASM_DMA_MAPPING_H
-#define _ASM_DMA_MAPPING_H
-
-extern const struct dma_map_ops mn10300_dma_ops;
-
-static inline const struct dma_map_ops *get_arch_dma_ops(struct bus_type *bus)
-{
-	return &mn10300_dma_ops;
-}
-
-#endif

arch/mn10300/include/asm/dma.h

@@ -1,117 +0,0 @@
-/* MN10300 ISA DMA handlers and definitions
- *
- * Copyright (C) 2007 Matsushita Electric Industrial Co., Ltd.
- * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public Licence
- * as published by the Free Software Foundation; either version
- * 2 of the Licence, or (at your option) any later version.
- */
-#ifndef _ASM_DMA_H
-#define _ASM_DMA_H
-
-#include <linux/spinlock.h>
-#include <asm/io.h>
-#include <linux/delay.h>
-
-#undef MAX_DMA_CHANNELS		/* switch off linux/kernel/dma.c */
-#define MAX_DMA_ADDRESS		0xbfffffff
-
-extern spinlock_t dma_spin_lock;
-
-static inline unsigned long claim_dma_lock(void)
-{
-	unsigned long flags;
-	spin_lock_irqsave(&dma_spin_lock, flags);
-	return flags;
-}
-
-static inline void release_dma_lock(unsigned long flags)
-{
-	spin_unlock_irqrestore(&dma_spin_lock, flags);
-}
-
-/* enable/disable a specific DMA channel */
-static inline void enable_dma(unsigned int dmanr)
-{
-}
-
-static inline void disable_dma(unsigned int dmanr)
-{
-}
-
-/* Clear the 'DMA Pointer Flip Flop'.
- * Write 0 for LSB/MSB, 1 for MSB/LSB access.
- * Use this once to initialize the FF to a known state.
- * After that, keep track of it. :-)
- * --- In order to do that, the DMA routines below should ---
- * --- only be used while holding the DMA lock ! ---
- */
-static inline void clear_dma_ff(unsigned int dmanr)
-{
-}
-
-/* set mode (above) for a specific DMA channel */
-static inline void set_dma_mode(unsigned int dmanr, char mode)
-{
-}
-
-/* Set only the page register bits of the transfer address.
- * This is used for successive transfers when we know the contents of
- * the lower 16 bits of the DMA current address register, but a 64k boundary
- * may have been crossed.
- */
-static inline void set_dma_page(unsigned int dmanr, char pagenr)
-{
-}
-
-
-/* Set transfer address & page bits for specific DMA channel.
- * Assumes dma flipflop is clear.
- */
-static inline void set_dma_addr(unsigned int dmanr, unsigned int a)
-{
-}
-
-
-/* Set transfer size (max 64k for DMA1..3, 128k for DMA5..7) for
- * a specific DMA channel.
- * You must ensure the parameters are valid.
- * NOTE: from a manual: "the number of transfers is one more
- * than the initial word count"! This is taken into account.
- * Assumes dma flip-flop is clear.
- * NOTE 2: "count" represents _bytes_ and must be even for channels 5-7.
- */
-static inline void set_dma_count(unsigned int dmanr, unsigned int count)
-{
-}
-
-
-/* Get DMA residue count. After a DMA transfer, this
- * should return zero. Reading this while a DMA transfer is
- * still in progress will return unpredictable results.
- * If called before the channel has been used, it may return 1.
- * Otherwise, it returns the number of _bytes_ left to transfer.
- *
- * Assumes DMA flip-flop is clear.
- */
-static inline int get_dma_residue(unsigned int dmanr)
-{
-	return 0;
-}
-
-
-/* These are in kernel/dma.c: */
-extern int request_dma(unsigned int dmanr, const char *device_id);
-extern void free_dma(unsigned int dmanr);
-
-/* From PCI */
-
-#ifdef CONFIG_PCI
-extern int isa_dma_bridge_buggy;
-#else
-#define isa_dma_bridge_buggy 	(0)
-#endif
-
-#endif /* _ASM_DMA_H */

arch/mn10300/include/asm/dmactl-regs.h

@@ -1,16 +0,0 @@
-/* MN10300 on-board DMA controller registers
- *
- * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
- * Written by David Howells (dhowells@redhat.com)
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public Licence
- * as published by the Free Software Foundation; either version
- * 2 of the Licence, or (at your option) any later version.
- */
-#ifndef _ASM_DMACTL_REGS_H
-#define _ASM_DMACTL_REGS_H
-
-#include <proc/dmactl-regs.h>
-
-#endif /* _ASM_DMACTL_REGS_H */

arch/mn10300/include/asm/elf.h

@@ -1,153 +0,0 @@
-/* MN10300 ELF constant and register definitions
- *
- * Copyright (C) 2007 Matsushita Electric Industrial Co., Ltd.
- * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
- * Written by David Howells (dhowells@redhat.com)
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public Licence
- * as published by the Free Software Foundation; either version
- * 2 of the Licence, or (at your option) any later version.
- */
-#ifndef _ASM_ELF_H
-#define _ASM_ELF_H
-
-#include <linux/utsname.h>
-#include <asm/ptrace.h>
-#include <asm/user.h>
-
-/*
- * AM33 relocations
- */
-#define R_MN10300_NONE		0	/* No reloc.  */
-#define R_MN10300_32		1	/* Direct 32 bit.  */
-#define R_MN10300_16		2	/* Direct 16 bit.  */
-#define R_MN10300_8		3	/* Direct 8 bit.  */
-#define R_MN10300_PCREL32	4	/* PC-relative 32-bit.  */
-#define R_MN10300_PCREL16	5	/* PC-relative 16-bit signed.  */
-#define R_MN10300_PCREL8	6	/* PC-relative 8-bit signed.  */
-#define R_MN10300_24		9	/* Direct 24 bit.  */
-#define R_MN10300_RELATIVE	23	/* Adjust by program base.  */
-#define R_MN10300_SYM_DIFF	33	/* Adjustment when relaxing. */
-#define R_MN10300_ALIGN 	34	/* Alignment requirement. */
-
-/*
- * AM33/AM34 HW Capabilities
- */
-#define HWCAP_MN10300_ATOMIC_OP_UNIT	1	/* Has AM34 Atomic Operations */
-
-
-/*
- * ELF register definitions..
- */
-typedef unsigned long elf_greg_t;
-
-#define ELF_NGREG ((sizeof(struct pt_regs) / sizeof(elf_greg_t)) - 1)
-typedef elf_greg_t elf_gregset_t[ELF_NGREG];
-
-#define ELF_NFPREG 32
-typedef float elf_fpreg_t;
-
-typedef struct {
-	elf_fpreg_t	fpregs[ELF_NFPREG];
-	u_int32_t	fpcr;
-} elf_fpregset_t;
-
-/*
- * This is used to ensure we don't load something for the wrong architecture
- */
-#define elf_check_arch(x) \
-	(((x)->e_machine == EM_CYGNUS_MN10300) ||	\
-	 ((x)->e_machine == EM_MN10300))
-
-/*
- * These are used to set parameters in the core dumps.
- */
-#define ELF_CLASS	ELFCLASS32
-#define ELF_DATA	ELFDATA2LSB
-#define ELF_ARCH	EM_MN10300
-
-/*
- * ELF process initialiser
- */
-#define ELF_PLAT_INIT(_r, load_addr)					\
-do {									\
-	struct pt_regs *_ur = current->thread.uregs;			\
-	_ur->a3   = 0;	_ur->a2   = 0;	_ur->d3   = 0;	_ur->d2   = 0;	\
-	_ur->mcvf = 0;	_ur->mcrl = 0;	_ur->mcrh = 0;	_ur->mdrq = 0;	\
-	_ur->e1   = 0;	_ur->e0   = 0;	_ur->e7   = 0;	_ur->e6   = 0;	\
-	_ur->e5   = 0;	_ur->e4   = 0;	_ur->e3   = 0;	_ur->e2   = 0;	\
-	_ur->lar  = 0;	_ur->lir  = 0;	_ur->mdr  = 0;			\
-	_ur->a1   = 0;	_ur->a0   = 0;	_ur->d1   = 0;	_ur->d0   = 0;	\
-} while (0)
-
-#define CORE_DUMP_USE_REGSET
-#define ELF_EXEC_PAGESIZE	4096
-
-/*
- * This is the location that an ET_DYN program is loaded if exec'ed.  Typical
- * use of this is to invoke "./ld.so someprog" to test out a new version of
- * the loader.  We need to make sure that it is out of the way of the program
- * that it will "exec", and that there is sufficient room for the brk.
- * - must clear the VMALLOC area
- */
-#define ELF_ET_DYN_BASE         0x04000000
-
-/*
- * regs is struct pt_regs, pr_reg is elf_gregset_t (which is
- * now struct user_regs, they are different)
- * - ELF_CORE_COPY_REGS has been guessed, and may be wrong
- */
-#define ELF_CORE_COPY_REGS(pr_reg, regs)	\
-do {						\
-	pr_reg[0]	= regs->a3;		\
-	pr_reg[1]	= regs->a2;		\
-	pr_reg[2]	= regs->d3;		\
-	pr_reg[3]	= regs->d2;		\
-	pr_reg[4]	= regs->mcvf;		\
-	pr_reg[5]	= regs->mcrl;		\
-	pr_reg[6]	= regs->mcrh;		\
-	pr_reg[7]	= regs->mdrq;		\
-	pr_reg[8]	= regs->e1;		\
-	pr_reg[9]	= regs->e0;		\
-	pr_reg[10]	= regs->e7;		\
-	pr_reg[11]	= regs->e6;		\
-	pr_reg[12]	= regs->e5;		\
-	pr_reg[13]	= regs->e4;		\
-	pr_reg[14]	= regs->e3;		\
-	pr_reg[15]	= regs->e2;		\
-	pr_reg[16]	= regs->sp;		\
-	pr_reg[17]	= regs->lar;		\
-	pr_reg[18]	= regs->lir;		\
-	pr_reg[19]	= regs->mdr;		\
-	pr_reg[20]	= regs->a1;		\
-	pr_reg[21]	= regs->a0;		\
-	pr_reg[22]	= regs->d1;		\
-	pr_reg[23]	= regs->d0;		\
-	pr_reg[24]	= regs->orig_d0;	\
-	pr_reg[25]	= regs->epsw;		\
-	pr_reg[26]	= regs->pc;		\
-} while (0);
-
-/*
- * This yields a mask that user programs can use to figure out what
- * instruction set this CPU supports.  This could be done in user space,
- * but it's not easy, and we've already done it here.
- */
-#ifdef CONFIG_MN10300_HAS_ATOMIC_OPS_UNIT
-#define ELF_HWCAP	(HWCAP_MN10300_ATOMIC_OP_UNIT)
-#else
-#define ELF_HWCAP	(0)
-#endif
-
-/*
- * This yields a string that ld.so will use to load implementation
- * specific libraries for optimization.  This is more specific in
- * intent than poking at uname or /proc/cpuinfo.
- *
- * For the moment, we have only optimizations for the Intel generations,
- * but that could change...
- */
-#define ELF_PLATFORM  (NULL)
-
-#endif /* _ASM_ELF_H */

arch/mn10300/include/asm/emergency-restart.h

@@ -1 +0,0 @@
-#include <asm-generic/emergency-restart.h>

arch/mn10300/include/asm/exceptions.h

@@ -1,121 +0,0 @@
-/* MN10300 Microcontroller core exceptions
- *
- * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
- * Written by David Howells (dhowells@redhat.com)
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public Licence
- * as published by the Free Software Foundation; either version
- * 2 of the Licence, or (at your option) any later version.
- */
-#ifndef _ASM_EXCEPTIONS_H
-#define _ASM_EXCEPTIONS_H
-
-#include <linux/linkage.h>
-
-/*
- * define the breakpoint instruction opcode to use
- * - note that the JTAG unit steals 0xFF, so you can't use JTAG and GDBSTUB at
- *   the same time.
- */
-#define GDBSTUB_BKPT		0xFF
-
-#ifndef __ASSEMBLY__
-
-/*
- * enumeration of exception codes (as extracted from TBR MSW)
- */
-enum exception_code {
-	EXCEP_RESET		= 0x000000,	/* reset */
-
-	/* MMU exceptions */
-	EXCEP_ITLBMISS		= 0x000100,	/* instruction TLB miss */
-	EXCEP_DTLBMISS		= 0x000108,	/* data TLB miss */
-	EXCEP_IAERROR		= 0x000110,	/* instruction address */
-	EXCEP_DAERROR		= 0x000118,	/* data address */
-
-	/* system exceptions */
-	EXCEP_TRAP		= 0x000128,	/* program interrupt (PI instruction) */
-	EXCEP_ISTEP		= 0x000130,	/* single step */
-	EXCEP_IBREAK		= 0x000150,	/* instruction breakpoint */
-	EXCEP_OBREAK		= 0x000158,	/* operand breakpoint */
-	EXCEP_PRIVINS		= 0x000160,	/* privileged instruction execution */
-	EXCEP_UNIMPINS		= 0x000168,	/* unimplemented instruction execution */
-	EXCEP_UNIMPEXINS	= 0x000170,	/* unimplemented extended instruction execution */
-	EXCEP_MEMERR		= 0x000178,	/* illegal memory access */
-	EXCEP_MISALIGN		= 0x000180,	/* misalignment */
-	EXCEP_BUSERROR		= 0x000188,	/* bus error */
-	EXCEP_ILLINSACC		= 0x000190,	/* illegal instruction access */
-	EXCEP_ILLDATACC		= 0x000198,	/* illegal data access */
-	EXCEP_IOINSACC		= 0x0001a0,	/* I/O space instruction access */
-	EXCEP_PRIVINSACC	= 0x0001a8,	/* privileged space instruction access */
-	EXCEP_PRIVDATACC	= 0x0001b0,	/* privileged space data access */
-	EXCEP_DATINSACC		= 0x0001b8,	/* data space instruction access */
-	EXCEP_DOUBLE_FAULT	= 0x000200,	/* double fault */
-
-	/* FPU exceptions */
-	EXCEP_FPU_DISABLED	= 0x0001c0,	/* FPU disabled */
-	EXCEP_FPU_UNIMPINS	= 0x0001c8,	/* FPU unimplemented operation */
-	EXCEP_FPU_OPERATION	= 0x0001d0,	/* FPU operation */
-
-	/* interrupts */
-	EXCEP_WDT		= 0x000240,	/* watchdog timer overflow */
-	EXCEP_NMI		= 0x000248,	/* non-maskable interrupt */
-	EXCEP_IRQ_LEVEL0	= 0x000280,	/* level 0 maskable interrupt */
-	EXCEP_IRQ_LEVEL1	= 0x000288,	/* level 1 maskable interrupt */
-	EXCEP_IRQ_LEVEL2	= 0x000290,	/* level 2 maskable interrupt */
-	EXCEP_IRQ_LEVEL3	= 0x000298,	/* level 3 maskable interrupt */
-	EXCEP_IRQ_LEVEL4	= 0x0002a0,	/* level 4 maskable interrupt */
-	EXCEP_IRQ_LEVEL5	= 0x0002a8,	/* level 5 maskable interrupt */
-	EXCEP_IRQ_LEVEL6	= 0x0002b0,	/* level 6 maskable interrupt */
-
-	/* system calls */
-	EXCEP_SYSCALL0		= 0x000300,	/* system call 0 */
-	EXCEP_SYSCALL1		= 0x000308,	/* system call 1 */
-	EXCEP_SYSCALL2		= 0x000310,	/* system call 2 */
-	EXCEP_SYSCALL3		= 0x000318,	/* system call 3 */
-	EXCEP_SYSCALL4		= 0x000320,	/* system call 4 */
-	EXCEP_SYSCALL5		= 0x000328,	/* system call 5 */
-	EXCEP_SYSCALL6		= 0x000330,	/* system call 6 */
-	EXCEP_SYSCALL7		= 0x000338,	/* system call 7 */
-	EXCEP_SYSCALL8		= 0x000340,	/* system call 8 */
-	EXCEP_SYSCALL9		= 0x000348,	/* system call 9 */
-	EXCEP_SYSCALL10		= 0x000350,	/* system call 10 */
-	EXCEP_SYSCALL11		= 0x000358,	/* system call 11 */
-	EXCEP_SYSCALL12		= 0x000360,	/* system call 12 */
-	EXCEP_SYSCALL13		= 0x000368,	/* system call 13 */
-	EXCEP_SYSCALL14		= 0x000370,	/* system call 14 */
-	EXCEP_SYSCALL15		= 0x000378,	/* system call 15 */
-};
-
-extern void __set_intr_stub(enum exception_code code, void *handler);
-extern void set_intr_stub(enum exception_code code, void *handler);
-
-struct pt_regs;
-
-extern asmlinkage void __common_exception(void);
-extern asmlinkage void itlb_miss(void);
-extern asmlinkage void dtlb_miss(void);
-extern asmlinkage void itlb_aerror(void);
-extern asmlinkage void dtlb_aerror(void);
-extern asmlinkage void raw_bus_error(void);
-extern asmlinkage void double_fault(void);
-extern asmlinkage int  system_call(struct pt_regs *);
-extern asmlinkage void nmi(struct pt_regs *, enum exception_code);
-extern asmlinkage void uninitialised_exception(struct pt_regs *,
-					       enum exception_code);
-extern asmlinkage void irq_handler(void);
-extern asmlinkage void profile_handler(void);
-extern asmlinkage void nmi_handler(void);
-extern asmlinkage void misalignment(struct pt_regs *, enum exception_code);
-
-extern void die(const char *, struct pt_regs *, enum exception_code)
-	__noreturn;
-
-extern int die_if_no_fixup(const char *, struct pt_regs *, enum exception_code);
-
-#define NUM2EXCEP_IRQ_LEVEL(num)	(EXCEP_IRQ_LEVEL0 + (num) * 8)
-
-#endif /* __ASSEMBLY__ */
-
-#endif /* _ASM_EXCEPTIONS_H */

arch/mn10300/include/asm/fpu.h

@@ -1,132 +0,0 @@
-/* MN10300 FPU definitions
- *
- * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
- * Written by David Howells (dhowells@redhat.com)
- * Derived from include/asm-i386/i387.h: Copyright (C) 1994 Linus Torvalds
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public Licence
- * as published by the Free Software Foundation; either version
- * 2 of the Licence, or (at your option) any later version.
- */
-#ifndef _ASM_FPU_H
-#define _ASM_FPU_H
-
-#ifndef __ASSEMBLY__
-
-#include <linux/sched.h>
-#include <asm/exceptions.h>
-#include <asm/sigcontext.h>
-
-#ifdef __KERNEL__
-
-extern asmlinkage void fpu_disabled(void);
-
-#ifdef CONFIG_FPU
-
-#ifdef CONFIG_LAZY_SAVE_FPU
-/* the task that currently owns the FPU state */
-extern struct task_struct *fpu_state_owner;
-#endif
-
-#if (THREAD_USING_FPU & ~0xff)
-#error THREAD_USING_FPU must be smaller than 0x100.
-#endif
-
-static inline void set_using_fpu(struct task_struct *tsk)
-{
-	asm volatile(
-		"bset %0,(0,%1)"
-		:
-		: "i"(THREAD_USING_FPU), "a"(&tsk->thread.fpu_flags)
-		: "memory", "cc");
-}
-
-static inline void clear_using_fpu(struct task_struct *tsk)
-{
-	asm volatile(
-		"bclr %0,(0,%1)"
-		:
-		: "i"(THREAD_USING_FPU), "a"(&tsk->thread.fpu_flags)
-		: "memory", "cc");
-}
-
-#define is_using_fpu(tsk) ((tsk)->thread.fpu_flags & THREAD_USING_FPU)
-
-extern asmlinkage void fpu_kill_state(struct task_struct *);
-extern asmlinkage void fpu_exception(struct pt_regs *, enum exception_code);
-extern asmlinkage void fpu_init_state(void);
-extern asmlinkage void fpu_save(struct fpu_state_struct *);
-extern int fpu_setup_sigcontext(struct fpucontext *buf);
-extern int fpu_restore_sigcontext(struct fpucontext *buf);
-
-static inline void unlazy_fpu(struct task_struct *tsk)
-{
-	preempt_disable();
-#ifndef CONFIG_LAZY_SAVE_FPU
-	if (tsk->thread.fpu_flags & THREAD_HAS_FPU) {
-		fpu_save(&tsk->thread.fpu_state);
-		tsk->thread.fpu_flags &= ~THREAD_HAS_FPU;
-		tsk->thread.uregs->epsw &= ~EPSW_FE;
-	}
-#else
-	if (fpu_state_owner == tsk)
-		fpu_save(&tsk->thread.fpu_state);
-#endif
-	preempt_enable();
-}
-
-static inline void exit_fpu(struct task_struct *tsk)
-{
-#ifdef CONFIG_LAZY_SAVE_FPU
-	preempt_disable();
-	if (fpu_state_owner == tsk)
-		fpu_state_owner = NULL;
-	preempt_enable();
-#endif
-}
-
-static inline void flush_fpu(void)
-{
-	struct task_struct *tsk = current;
-
-	preempt_disable();
-#ifndef CONFIG_LAZY_SAVE_FPU
-	if (tsk->thread.fpu_flags & THREAD_HAS_FPU) {
-		tsk->thread.fpu_flags &= ~THREAD_HAS_FPU;
-		tsk->thread.uregs->epsw &= ~EPSW_FE;
-	}
-#else
-	if (fpu_state_owner == tsk) {
-		fpu_state_owner = NULL;
-		tsk->thread.uregs->epsw &= ~EPSW_FE;
-	}
-#endif
-	preempt_enable();
-	clear_using_fpu(tsk);
-}
-
-#else /* CONFIG_FPU */
-
-extern asmlinkage
-void unexpected_fpu_exception(struct pt_regs *, enum exception_code);
-#define fpu_exception unexpected_fpu_exception
-
-struct task_struct;
-struct fpu_state_struct;
-static inline bool is_using_fpu(struct task_struct *tsk) { return false; }
-static inline void set_using_fpu(struct task_struct *tsk) {}
-static inline void clear_using_fpu(struct task_struct *tsk) {}
-static inline void fpu_init_state(void) {}
-static inline void fpu_save(struct fpu_state_struct *s) {}
-static inline void fpu_kill_state(struct task_struct *tsk) {}
-static inline void unlazy_fpu(struct task_struct *tsk) {}
-static inline void exit_fpu(struct task_struct *tsk) {}
-static inline void flush_fpu(void) {}
-static inline int fpu_setup_sigcontext(struct fpucontext *buf) { return 0; }
-static inline int fpu_restore_sigcontext(struct fpucontext *buf) { return 0; }
-#endif /* CONFIG_FPU  */
-
-#endif /* __KERNEL__ */
-#endif /* !__ASSEMBLY__ */
-#endif /* _ASM_FPU_H */

arch/mn10300/include/asm/frame.inc

@@ -1,97 +0,0 @@
-/* MN10300 Microcontroller core system register definitions -*- asm -*-
- *
- * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
- * Written by David Howells (dhowells@redhat.com)
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public Licence
- * as published by the Free Software Foundation; either version
- * 2 of the Licence, or (at your option) any later version.
- */
-#ifndef _ASM_FRAME_INC
-#define _ASM_FRAME_INC
-
-#ifndef __ASSEMBLY__
-#error not for use in C files
-#endif
-
-#ifndef __ASM_OFFSETS_H__
-#include <asm/asm-offsets.h>
-#endif
-#include <asm/thread_info.h>
-
-#define pi break
-
-#define fp a3
-
-###############################################################################
-#
-# build a stack frame from the registers
-# - the caller has subtracted 4 from SP before coming here
-#
-###############################################################################
-.macro SAVE_ALL
-	add	-4,sp				# next exception frame ptr save area
-	movm	[other],(sp)
-	mov	usp,a1
-	mov	a1,(sp)				# USP in MOVM[other] dummy slot
-	movm	[d2,d3,a2,a3,exreg0,exreg1,exother],(sp)
-	mov	sp,fp				# FRAME pointer in A3
-	add	-12,sp				# allow for calls to be made
-
-	# push the exception frame onto the front of the list
-	GET_THREAD_INFO a1
-	mov	(TI_frame,a1),a0
-	mov	a0,(REG_NEXT,fp)
-	mov	fp,(TI_frame,a1)
-
-	# disable the FPU inside the kernel
-	and	~EPSW_FE,epsw
-
-	# we may be holding current in E2
-#ifdef CONFIG_MN10300_CURRENT_IN_E2
-	mov	(__current),e2
-#endif
-.endm
-
-###############################################################################
-#
-# restore the registers from a stack frame
-#
-###############################################################################
-.macro RESTORE_ALL
-	# peel back the stack to the calling frame
-	# - we need that when returning from interrupts to kernel mode
-	GET_THREAD_INFO a0
-	mov	(TI_frame,a0),fp
-	mov	fp,sp
-	mov	(REG_NEXT,fp),d0
-	mov	d0,(TI_frame,a0)                # userspace has regs->next == 0
-
-#ifndef CONFIG_MN10300_USING_JTAG
-	mov	(REG_EPSW,fp),d0
-	btst	EPSW_T,d0
-	beq	99f
-
-	or	EPSW_NMID,epsw
-	movhu	(DCR),d1
-	or	0x0001, d1
-	movhu	d1,(DCR)
-
-99:
-#endif
-	movm	(sp),[d2,d3,a2,a3,exreg0,exreg1,exother]
-
-	# must restore usp even if returning to kernel space,
-	# when CONFIG_PREEMPT is enabled.
-	mov	(sp),a1				# USP in MOVM[other] dummy slot
-	mov	a1,usp
-
-	movm	(sp),[other]
-	add	8,sp
-	rti
-
-.endm
-
-
-#endif /* _ASM_FRAME_INC */

arch/mn10300/include/asm/ftrace.h

@@ -1 +0,0 @@
-/* empty */

arch/mn10300/include/asm/futex.h

@@ -1 +0,0 @@
-#include <asm-generic/futex.h>

arch/mn10300/include/asm/gdb-stub.h

@@ -1,182 +0,0 @@
-/* MN10300 Kernel GDB stub definitions
- *
- * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
- * Written by David Howells (dhowells@redhat.com)
- * - Derived from asm-mips/gdb-stub.h (c) 1995 Andreas Busse
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public Licence
- * as published by the Free Software Foundation; either version
- * 2 of the Licence, or (at your option) any later version.
- */
-#ifndef _ASM_GDB_STUB_H
-#define _ASM_GDB_STUB_H
-
-#include <asm/exceptions.h>
-
-/*
- * register ID numbers in GDB remote protocol
- */
-
-#define GDB_REGID_PC		9
-#define GDB_REGID_FP		7
-#define GDB_REGID_SP		8
-
-/*
- * virtual stack layout for the GDB exception handler
- */
-#define NUMREGS			64
-
-#define GDB_FR_D0		(0 * 4)
-#define GDB_FR_D1		(1 * 4)
-#define GDB_FR_D2		(2 * 4)
-#define GDB_FR_D3		(3 * 4)
-#define GDB_FR_A0		(4 * 4)
-#define GDB_FR_A1		(5 * 4)
-#define GDB_FR_A2		(6 * 4)
-#define GDB_FR_A3		(7 * 4)
-
-#define GDB_FR_SP		(8 * 4)
-#define GDB_FR_PC		(9 * 4)
-#define GDB_FR_MDR		(10 * 4)
-#define GDB_FR_EPSW		(11 * 4)
-#define GDB_FR_LIR		(12 * 4)
-#define GDB_FR_LAR		(13 * 4)
-#define GDB_FR_MDRQ		(14 * 4)
-
-#define GDB_FR_E0		(15 * 4)
-#define GDB_FR_E1		(16 * 4)
-#define GDB_FR_E2		(17 * 4)
-#define GDB_FR_E3		(18 * 4)
-#define GDB_FR_E4		(19 * 4)
-#define GDB_FR_E5		(20 * 4)
-#define GDB_FR_E6		(21 * 4)
-#define GDB_FR_E7		(22 * 4)
-
-#define GDB_FR_SSP		(23 * 4)
-#define GDB_FR_MSP		(24 * 4)
-#define GDB_FR_USP		(25 * 4)
-#define GDB_FR_MCRH		(26 * 4)
-#define GDB_FR_MCRL		(27 * 4)
-#define GDB_FR_MCVF		(28 * 4)
-
-#define GDB_FR_FPCR		(29 * 4)
-#define GDB_FR_DUMMY0		(30 * 4)
-#define GDB_FR_DUMMY1		(31 * 4)
-
-#define GDB_FR_FS0		(32 * 4)
-
-#define GDB_FR_SIZE		(NUMREGS * 4)
-
-#ifndef __ASSEMBLY__
-
-/*
- * This is the same as above, but for the high-level
- * part of the GDB stub.
- */
-
-struct gdb_regs {
-	/* saved main processor registers */
-	u32	d0, d1, d2, d3, a0, a1, a2, a3;
-	u32	sp, pc, mdr, epsw, lir, lar, mdrq;
-	u32	e0, e1, e2, e3, e4, e5, e6, e7;
-	u32	ssp, msp, usp, mcrh, mcrl, mcvf;
-
-	/* saved floating point registers */
-	u32	fpcr, _dummy0, _dummy1;
-	u32	fs0,  fs1,  fs2,  fs3,  fs4,  fs5,  fs6,  fs7;
-	u32	fs8,  fs9,  fs10, fs11, fs12, fs13, fs14, fs15;
-	u32	fs16, fs17, fs18, fs19, fs20, fs21, fs22, fs23;
-	u32	fs24, fs25, fs26, fs27, fs28, fs29, fs30, fs31;
-};
-
-/*
- * Prototypes
- */
-extern void show_registers_only(struct pt_regs *regs);
-
-extern asmlinkage void gdbstub_init(void);
-extern asmlinkage void gdbstub_exit(int status);
-extern asmlinkage void gdbstub_io_init(void);
-extern asmlinkage void gdbstub_io_set_baud(unsigned baud);
-extern asmlinkage int  gdbstub_io_rx_char(unsigned char *_ch, int nonblock);
-extern asmlinkage void gdbstub_io_tx_char(unsigned char ch);
-extern asmlinkage void gdbstub_io_tx_flush(void);
-
-extern asmlinkage void gdbstub_io_rx_handler(void);
-extern asmlinkage void gdbstub_rx_irq(struct pt_regs *, enum exception_code);
-extern asmlinkage int  gdbstub_intercept(struct pt_regs *, enum exception_code);
-extern asmlinkage void gdbstub_exception(struct pt_regs *, enum exception_code);
-extern asmlinkage void __gdbstub_bug_trap(void);
-extern asmlinkage void __gdbstub_pause(void);
-
-#ifdef CONFIG_MN10300_CACHE_ENABLED
-extern asmlinkage void gdbstub_purge_cache(void);
-#else
-#define gdbstub_purge_cache()	do {} while (0)
-#endif
-
-/* Used to prevent crashes in memory access */
-extern asmlinkage int  gdbstub_read_byte(const u8 *, u8 *);
-extern asmlinkage int  gdbstub_read_word(const u8 *, u8 *);
-extern asmlinkage int  gdbstub_read_dword(const u8 *, u8 *);
-extern asmlinkage int  gdbstub_write_byte(u32, u8 *);
-extern asmlinkage int  gdbstub_write_word(u32, u8 *);
-extern asmlinkage int  gdbstub_write_dword(u32, u8 *);
-
-extern asmlinkage void gdbstub_read_byte_guard(void);
-extern asmlinkage void gdbstub_read_byte_cont(void);
-extern asmlinkage void gdbstub_read_word_guard(void);
-extern asmlinkage void gdbstub_read_word_cont(void);
-extern asmlinkage void gdbstub_read_dword_guard(void);
-extern asmlinkage void gdbstub_read_dword_cont(void);
-extern asmlinkage void gdbstub_write_byte_guard(void);
-extern asmlinkage void gdbstub_write_byte_cont(void);
-extern asmlinkage void gdbstub_write_word_guard(void);
-extern asmlinkage void gdbstub_write_word_cont(void);
-extern asmlinkage void gdbstub_write_dword_guard(void);
-extern asmlinkage void gdbstub_write_dword_cont(void);
-
-extern u8	gdbstub_rx_buffer[PAGE_SIZE];
-extern u32	gdbstub_rx_inp;
-extern u32	gdbstub_rx_outp;
-extern u8	gdbstub_rx_overflow;
-extern u8	gdbstub_busy;
-extern u8	gdbstub_rx_unget;
-
-#ifdef CONFIG_GDBSTUB_DEBUGGING
-extern void gdbstub_printk(const char *fmt, ...)
-	__attribute__((format(printf, 1, 2)));
-#else
-static inline __attribute__((format(printf, 1, 2)))
-void gdbstub_printk(const char *fmt, ...)
-{
-}
-#endif
-
-#ifdef CONFIG_GDBSTUB_DEBUG_ENTRY
-#define gdbstub_entry(FMT, ...) gdbstub_printk(FMT, ##__VA_ARGS__)
-#else
-#define gdbstub_entry(FMT, ...) no_printk(FMT, ##__VA_ARGS__)
-#endif
-
-#ifdef CONFIG_GDBSTUB_DEBUG_PROTOCOL
-#define gdbstub_proto(FMT, ...) gdbstub_printk(FMT, ##__VA_ARGS__)
-#else
-#define gdbstub_proto(FMT, ...) no_printk(FMT, ##__VA_ARGS__)
-#endif
-
-#ifdef CONFIG_GDBSTUB_DEBUG_IO
-#define gdbstub_io(FMT, ...) gdbstub_printk(FMT, ##__VA_ARGS__)
-#else
-#define gdbstub_io(FMT, ...) no_printk(FMT, ##__VA_ARGS__)
-#endif
-
-#ifdef CONFIG_GDBSTUB_DEBUG_BREAKPOINT
-#define gdbstub_bkpt(FMT, ...) gdbstub_printk(FMT, ##__VA_ARGS__)
-#else
-#define gdbstub_bkpt(FMT, ...) no_printk(FMT, ##__VA_ARGS__)
-#endif
-
-#endif /* !__ASSEMBLY__ */
-#endif /* _ASM_GDB_STUB_H */

arch/mn10300/include/asm/hardirq.h

@@ -1,49 +0,0 @@
-/* MN10300 Hardware IRQ statistics and management
- *
- * Copyright (C) 2007 Matsushita Electric Industrial Co., Ltd.
- * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
- * Modified by David Howells (dhowells@redhat.com)
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public Licence
- * as published by the Free Software Foundation; either version
- * 2 of the Licence, or (at your option) any later version.
- */
-#ifndef _ASM_HARDIRQ_H
-#define _ASM_HARDIRQ_H
-
-#include <linux/threads.h>
-#include <linux/irq.h>
-#include <asm/exceptions.h>
-
-/* assembly code in softirq.h is sensitive to the offsets of these fields */
-typedef struct {
-	unsigned int	__softirq_pending;
-#ifdef CONFIG_MN10300_WD_TIMER
-	unsigned int	__nmi_count;	/* arch dependent */
-	unsigned int	__irq_count;	/* arch dependent */
-#endif
-} ____cacheline_aligned irq_cpustat_t;
-
-#include <linux/irq_cpustat.h>	/* Standard mappings for irq_cpustat_t above */
-
-extern void ack_bad_irq(int irq);
-
-/*
- * manipulate stubs in the MN10300 CPU Trap/Interrupt Vector table
- * - these should jump to __common_exception in entry.S unless there's a good
- *   reason to do otherwise (see trap_preinit() in traps.c)
- */
-typedef void (*intr_stub_fnx)(struct pt_regs *regs,
-			      enum exception_code intcode);
-
-/*
- * manipulate pointers in the Exception table (see entry.S)
- * - these are indexed by decoding the lower 24 bits of the TBR register
- * - note that the MN103E010 doesn't always trap through the correct vector,
- *   but does always set the TBR correctly
- */
-extern asmlinkage void set_excp_vector(enum exception_code code,
-				       intr_stub_fnx handler);
-
-#endif /* _ASM_HARDIRQ_H */

arch/mn10300/include/asm/highmem.h

@@ -1,131 +0,0 @@
-/* MN10300 Virtual kernel memory mappings for high memory
- *
- * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
- * Written by David Howells (dhowells@redhat.com)
- * - Derived from include/asm-i386/highmem.h
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public Licence
- * as published by the Free Software Foundation; either version
- * 2 of the Licence, or (at your option) any later version.
- */
-#ifndef _ASM_HIGHMEM_H
-#define _ASM_HIGHMEM_H
-
-#ifdef __KERNEL__
-
-#include <linux/init.h>
-#include <linux/interrupt.h>
-#include <linux/highmem.h>
-#include <asm/kmap_types.h>
-#include <asm/pgtable.h>
-
-/* undef for production */
-#undef HIGHMEM_DEBUG
-
-/* declarations for highmem.c */
-extern unsigned long highstart_pfn, highend_pfn;
-
-extern pte_t *kmap_pte;
-extern pgprot_t kmap_prot;
-extern pte_t *pkmap_page_table;
-
-extern void __init kmap_init(void);
-
-/*
- * Right now we initialize only a single pte table. It can be extended
- * easily, subsequent pte tables have to be allocated in one physical
- * chunk of RAM.
- */
-#define PKMAP_BASE	0xfe000000UL
-#define LAST_PKMAP	1024
-#define LAST_PKMAP_MASK (LAST_PKMAP - 1)
-#define PKMAP_NR(virt)  ((virt - PKMAP_BASE) >> PAGE_SHIFT)
-#define PKMAP_ADDR(nr)  (PKMAP_BASE + ((nr) << PAGE_SHIFT))
-
-extern unsigned long kmap_high(struct page *page);
-extern void kunmap_high(struct page *page);
-
-static inline unsigned long kmap(struct page *page)
-{
-	if (in_interrupt())
-		BUG();
-	if (page < highmem_start_page)
-		return page_address(page);
-	return kmap_high(page);
-}
-
-static inline void kunmap(struct page *page)
-{
-	if (in_interrupt())
-		BUG();
-	if (page < highmem_start_page)
-		return;
-	kunmap_high(page);
-}
-
-/*
- * The use of kmap_atomic/kunmap_atomic is discouraged - kmap/kunmap
- * gives a more generic (and caching) interface. But kmap_atomic can
- * be used in IRQ contexts, so in some (very limited) cases we need
- * it.
- */
-static inline void *kmap_atomic(struct page *page)
-{
-	unsigned long vaddr;
-	int idx, type;
-
-	preempt_disable();
-	pagefault_disable();
-	if (page < highmem_start_page)
-		return page_address(page);
-
-	type = kmap_atomic_idx_push();
-	idx = type + KM_TYPE_NR * smp_processor_id();
-	vaddr = __fix_to_virt(FIX_KMAP_BEGIN + idx);
-#if HIGHMEM_DEBUG
-	if (!pte_none(*(kmap_pte - idx)))
-		BUG();
-#endif
-	set_pte(kmap_pte - idx, mk_pte(page, kmap_prot));
-	local_flush_tlb_one(vaddr);
-
-	return (void *)vaddr;
-}
-
-static inline void __kunmap_atomic(unsigned long vaddr)
-{
-	int type;
-
-	if (vaddr < FIXADDR_START) { /* FIXME */
-		pagefault_enable();
-		preempt_enable();
-		return;
-	}
-
-	type = kmap_atomic_idx();
-
-#if HIGHMEM_DEBUG
-	{
-		unsigned int idx;
-		idx = type + KM_TYPE_NR * smp_processor_id();
-
-		if (vaddr != __fix_to_virt(FIX_KMAP_BEGIN + idx))
-			BUG();
-
-		/*
-		 * force other mappings to Oops if they'll try to access
-		 * this pte without first remap it
-		 */
-		pte_clear(kmap_pte - idx);
-		local_flush_tlb_one(vaddr);
-	}
-#endif
-
-	kmap_atomic_idx_pop();
-	pagefault_enable();
-	preempt_enable();
-}
-#endif /* __KERNEL__ */
-
-#endif /* _ASM_HIGHMEM_H */

arch/mn10300/include/asm/hw_irq.h

@@ -1,14 +0,0 @@
-/* MN10300 Hardware interrupt definitions
- *
- * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
- * Written by David Howells (dhowells@redhat.com)
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public Licence
- * as published by the Free Software Foundation; either version
- * 2 of the Licence, or (at your option) any later version.
- */
-#ifndef _ASM_HW_IRQ_H
-#define _ASM_HW_IRQ_H
-
-#endif /* _ASM_HW_IRQ_H */

arch/mn10300/include/asm/intctl-regs.h

@@ -1,71 +0,0 @@
-/* MN10300 On-board interrupt controller registers
- *
- * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
- * Written by David Howells (dhowells@redhat.com)
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public Licence
- * as published by the Free Software Foundation; either version
- * 2 of the Licence, or (at your option) any later version.
- */
-#ifndef _ASM_INTCTL_REGS_H
-#define _ASM_INTCTL_REGS_H
-
-#include <asm/cpu-regs.h>
-
-#ifdef __KERNEL__
-
-/*
- * Interrupt controller registers
- * - Registers 64-191 are at addresses offset from the main array
- */
-#define GxICR(X)						\
-	__SYSREG(0xd4000000 + (X) * 4 +				\
-		 (((X) >= 64) && ((X) < 192)) * 0xf00, u16)
-
-#define GxICR_u8(X)							\
-	__SYSREG(0xd4000000 + (X) * 4 +					\
-		 (((X) >= 64) && ((X) < 192)) * 0xf00, u8)
-
-#include <proc/intctl-regs.h>
-
-#define XIRQ_TRIGGER_LOWLEVEL	0
-#define XIRQ_TRIGGER_HILEVEL	1
-#define XIRQ_TRIGGER_NEGEDGE	2
-#define XIRQ_TRIGGER_POSEDGE	3
-
-/* non-maskable interrupt control */
-#define NMIIRQ			0
-#define NMICR			GxICR(NMIIRQ)	/* NMI control register */
-#define NMICR_NMIF		0x0001		/* NMI pin interrupt flag */
-#define NMICR_WDIF		0x0002		/* watchdog timer overflow flag */
-#define NMICR_ABUSERR		0x0008		/* async bus error flag */
-
-/* maskable interrupt control */
-#define GxICR_DETECT		0x0001		/* interrupt detect flag */
-#define GxICR_REQUEST		0x0010		/* interrupt request flag */
-#define GxICR_ENABLE		0x0100		/* interrupt enable flag */
-#define GxICR_LEVEL		0x7000		/* interrupt priority level */
-#define GxICR_LEVEL_0		0x0000		/* - level 0 */
-#define GxICR_LEVEL_1		0x1000		/* - level 1 */
-#define GxICR_LEVEL_2		0x2000		/* - level 2 */
-#define GxICR_LEVEL_3		0x3000		/* - level 3 */
-#define GxICR_LEVEL_4		0x4000		/* - level 4 */
-#define GxICR_LEVEL_5		0x5000		/* - level 5 */
-#define GxICR_LEVEL_6		0x6000		/* - level 6 */
-#define GxICR_LEVEL_SHIFT	12
-#define GxICR_NMI		0x8000		/* nmi request flag */
-
-#define NUM2GxICR_LEVEL(num)	((num) << GxICR_LEVEL_SHIFT)
-
-#ifndef __ASSEMBLY__
-extern void set_intr_level(int irq, u16 level);
-extern void mn10300_set_lateack_irq_type(int irq);
-#endif
-
-/* external interrupts */
-#define XIRQxICR(X)		GxICR((X))	/* external interrupt control regs */
-
-#endif /* __KERNEL__ */
-
-#endif /* _ASM_INTCTL_REGS_H */

arch/mn10300/include/asm/io.h

@@ -1,325 +0,0 @@
-/* MN10300 I/O port emulation and memory-mapped I/O
- *
- * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
- * Written by David Howells (dhowells@redhat.com)
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public Licence
- * as published by the Free Software Foundation; either version
- * 2 of the Licence, or (at your option) any later version.
- */
-#ifndef _ASM_IO_H
-#define _ASM_IO_H
-
-#include <asm/page.h> /* I/O is all done through memory accesses */
-#include <asm/cpu-regs.h>
-#include <asm/cacheflush.h>
-#include <asm-generic/pci_iomap.h>
-
-#define mmiowb() do {} while (0)
-
-/*****************************************************************************/
-/*
- * readX/writeX() are used to access memory mapped devices. On some
- * architectures the memory mapped IO stuff needs to be accessed
- * differently. On the x86 architecture, we just read/write the
- * memory location directly.
- */
-static inline u8 readb(const volatile void __iomem *addr)
-{
-	return *(const volatile u8 *) addr;
-}
-
-static inline u16 readw(const volatile void __iomem *addr)
-{
-	return *(const volatile u16 *) addr;
-}
-
-static inline u32 readl(const volatile void __iomem *addr)
-{
-	return *(const volatile u32 *) addr;
-}
-
-#define __raw_readb readb
-#define __raw_readw readw
-#define __raw_readl readl
-
-#define readb_relaxed readb
-#define readw_relaxed readw
-#define readl_relaxed readl
-
-static inline void writeb(u8 b, volatile void __iomem *addr)
-{
-	*(volatile u8 *) addr = b;
-}
-
-static inline void writew(u16 b, volatile void __iomem *addr)
-{
-	*(volatile u16 *) addr = b;
-}
-
-static inline void writel(u32 b, volatile void __iomem *addr)
-{
-	*(volatile u32 *) addr = b;
-}
-
-#define __raw_writeb writeb
-#define __raw_writew writew
-#define __raw_writel writel
-
-#define writeb_relaxed writeb
-#define writew_relaxed writew
-#define writel_relaxed writel
-
-/*****************************************************************************/
-/*
- * traditional input/output functions
- */
-static inline u8 inb_local(unsigned long addr)
-{
-	return readb((volatile void __iomem *) addr);
-}
-
-static inline void outb_local(u8 b, unsigned long addr)
-{
-	return writeb(b, (volatile void __iomem *) addr);
-}
-
-static inline u8 inb(unsigned long addr)
-{
-	return readb((volatile void __iomem *) addr);
-}
-
-static inline u16 inw(unsigned long addr)
-{
-	return readw((volatile void __iomem *) addr);
-}
-
-static inline u32 inl(unsigned long addr)
-{
-	return readl((volatile void __iomem *) addr);
-}
-
-static inline void outb(u8 b, unsigned long addr)
-{
-	return writeb(b, (volatile void __iomem *) addr);
-}
-
-static inline void outw(u16 b, unsigned long addr)
-{
-	return writew(b, (volatile void __iomem *) addr);
-}
-
-static inline void outl(u32 b, unsigned long addr)
-{
-	return writel(b, (volatile void __iomem *) addr);
-}
-
-#define inb_p(addr)	inb(addr)
-#define inw_p(addr)	inw(addr)
-#define inl_p(addr)	inl(addr)
-#define outb_p(x, addr)	outb((x), (addr))
-#define outw_p(x, addr)	outw((x), (addr))
-#define outl_p(x, addr)	outl((x), (addr))
-
-static inline void insb(unsigned long addr, void *buffer, int count)
-{
-	if (count) {
-		u8 *buf = buffer;
-		do {
-			u8 x = inb(addr);
-			*buf++ = x;
-		} while (--count);
-	}
-}
-
-static inline void insw(unsigned long addr, void *buffer, int count)
-{
-	if (count) {
-		u16 *buf = buffer;
-		do {
-			u16 x = inw(addr);
-			*buf++ = x;
-		} while (--count);
-	}
-}
-
-static inline void insl(unsigned long addr, void *buffer, int count)
-{
-	if (count) {
-		u32 *buf = buffer;
-		do {
-			u32 x = inl(addr);
-			*buf++ = x;
-		} while (--count);
-	}
-}
-
-static inline void outsb(unsigned long addr, const void *buffer, int count)
-{
-	if (count) {
-		const u8 *buf = buffer;
-		do {
-			outb(*buf++, addr);
-		} while (--count);
-	}
-}
-
-static inline void outsw(unsigned long addr, const void *buffer, int count)
-{
-	if (count) {
-		const u16 *buf = buffer;
-		do {
-			outw(*buf++, addr);
-		} while (--count);
-	}
-}
-
-extern void __outsl(unsigned long addr, const void *buffer, int count);
-static inline void outsl(unsigned long addr, const void *buffer, int count)
-{
-	if ((unsigned long) buffer & 0x3)
-		return __outsl(addr, buffer, count);
-
-	if (count) {
-		const u32 *buf = buffer;
-		do {
-			outl(*buf++, addr);
-		} while (--count);
-	}
-}
-
-#define ioread8(addr)		readb(addr)
-#define ioread16(addr)		readw(addr)
-#define ioread32(addr)		readl(addr)
-
-#define iowrite8(v, addr)	writeb((v), (addr))
-#define iowrite16(v, addr)	writew((v), (addr))
-#define iowrite32(v, addr)	writel((v), (addr))
-
-#define ioread16be(addr)	be16_to_cpu(readw(addr))
-#define ioread32be(addr)	be32_to_cpu(readl(addr))
-#define iowrite16be(v, addr)	writew(cpu_to_be16(v), (addr))
-#define iowrite32be(v, addr)	writel(cpu_to_be32(v), (addr))
-
-#define ioread8_rep(p, dst, count) \
-	insb((unsigned long) (p), (dst), (count))
-#define ioread16_rep(p, dst, count) \
-	insw((unsigned long) (p), (dst), (count))
-#define ioread32_rep(p, dst, count) \
-	insl((unsigned long) (p), (dst), (count))
-
-#define iowrite8_rep(p, src, count) \
-	outsb((unsigned long) (p), (src), (count))
-#define iowrite16_rep(p, src, count) \
-	outsw((unsigned long) (p), (src), (count))
-#define iowrite32_rep(p, src, count) \
-	outsl((unsigned long) (p), (src), (count))
-
-#define readsb(p, dst, count) \
-	insb((unsigned long) (p), (dst), (count))
-#define readsw(p, dst, count) \
-	insw((unsigned long) (p), (dst), (count))
-#define readsl(p, dst, count) \
-	insl((unsigned long) (p), (dst), (count))
-
-#define writesb(p, src, count) \
-	outsb((unsigned long) (p), (src), (count))
-#define writesw(p, src, count) \
-	outsw((unsigned long) (p), (src), (count))
-#define writesl(p, src, count) \
-	outsl((unsigned long) (p), (src), (count))
-
-#define IO_SPACE_LIMIT 0xffffffff
-
-#ifdef __KERNEL__
-
-#include <linux/vmalloc.h>
-#define __io_virt(x) ((void *) (x))
-
-/* Create a virtual mapping cookie for a PCI BAR (memory or IO) */
-struct pci_dev;
-static inline void pci_iounmap(struct pci_dev *dev, void __iomem *p)
-{
-}
-
-/*
- * Change virtual addresses to physical addresses and vv.
- * These are pretty trivial
- */
-static inline unsigned long virt_to_phys(volatile void *address)
-{
-	return __pa(address);
-}
-
-static inline void *phys_to_virt(unsigned long address)
-{
-	return __va(address);
-}
-
-/*
- * Change "struct page" to physical address.
- */
-static inline void __iomem *__ioremap(unsigned long offset, unsigned long size,
-				      unsigned long flags)
-{
-	return (void __iomem *) offset;
-}
-
-static inline void __iomem *ioremap(unsigned long offset, unsigned long size)
-{
-	return (void __iomem *)(offset & ~0x20000000);
-}
-
-/*
- * This one maps high address device memory and turns off caching for that
- * area.  it's useful if some control registers are in such an area and write
- * combining or read caching is not desirable:
- */
-static inline void __iomem *ioremap_nocache(unsigned long offset, unsigned long size)
-{
-	return (void __iomem *) (offset | 0x20000000);
-}
-
-#define ioremap_wc ioremap_nocache
-#define ioremap_wt ioremap_nocache
-#define ioremap_uc ioremap_nocache
-
-static inline void iounmap(void __iomem *addr)
-{
-}
-
-static inline void __iomem *ioport_map(unsigned long port, unsigned int nr)
-{
-	return (void __iomem *) port;
-}
-
-static inline void ioport_unmap(void __iomem *p)
-{
-}
-
-#define xlate_dev_kmem_ptr(p)	((void *) (p))
-#define xlate_dev_mem_ptr(p)	((void *) (p))
-
-/*
- * PCI bus iomem addresses must be in the region 0x80000000-0x9fffffff
- */
-static inline unsigned long virt_to_bus(volatile void *address)
-{
-	return ((unsigned long) address) & ~0x20000000;
-}
-
-static inline void *bus_to_virt(unsigned long address)
-{
-	return (void *) address;
-}
-
-#define page_to_bus page_to_phys
-
-#define memset_io(a, b, c)	memset(__io_virt(a), (b), (c))
-#define memcpy_fromio(a, b, c)	memcpy((a), __io_virt(b), (c))
-#define memcpy_toio(a, b, c)	memcpy(__io_virt(a), (b), (c))
-
-#endif /* __KERNEL__ */
-
-#endif /* _ASM_IO_H */

arch/mn10300/include/asm/irq.h

@@ -1,40 +0,0 @@
-/* MN10300 Hardware interrupt definitions
- *
- * Copyright (C) 2007 Matsushita Electric Industrial Co., Ltd.
- * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
- * Modified by David Howells (dhowells@redhat.com)
- * - Derived from include/asm-i386/irq.h:
- *   - (C) 1992, 1993 Linus Torvalds, (C) 1997 Ingo Molnar
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public Licence
- * as published by the Free Software Foundation; either version
- * 2 of the Licence, or (at your option) any later version.
- */
-#ifndef _ASM_IRQ_H
-#define _ASM_IRQ_H
-
-#include <asm/intctl-regs.h>
-#include <asm/reset-regs.h>
-#include <proc/irq.h>
-
-/* this number is used when no interrupt has been assigned */
-#define NO_IRQ		INT_MAX
-
-/*
- * hardware irq numbers
- * - the ASB2364 has an FPGA with an IRQ multiplexer on it
- */
-#ifdef CONFIG_MN10300_UNIT_ASB2364
-#include <unit/irq.h>
-#else
-#define NR_CPU_IRQS	GxICR_NUM_IRQS
-#define NR_IRQS		NR_CPU_IRQS
-#endif
-
-/* external hardware irq numbers */
-#define NR_XIRQS	GxICR_NUM_XIRQS
-
-#define irq_canonicalize(IRQ) (IRQ)
-
-#endif /* _ASM_IRQ_H */

arch/mn10300/include/asm/irq_regs.h

@@ -1,28 +0,0 @@
-/* MN10300 IRQ registers pointer definition
- *
- * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
- * Written by David Howells (dhowells@redhat.com)
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public Licence
- * as published by the Free Software Foundation; either version
- * 2 of the Licence, or (at your option) any later version.
- */
-#ifndef _ASM_IRQ_REGS_H
-#define _ASM_IRQ_REGS_H
-
-/*
- * Per-cpu current frame pointer - the location of the last exception frame on
- * the stack
- */
-#define ARCH_HAS_OWN_IRQ_REGS
-
-#ifndef __ASSEMBLY__
-static inline __attribute__((const))
-struct pt_regs *get_irq_regs(void)
-{
-	return current_frame();
-}
-#endif
-
-#endif /* _ASM_IRQ_REGS_H */

arch/mn10300/include/asm/irqflags.h

@@ -1,215 +0,0 @@
-/* MN10300 IRQ flag handling
- *
- * Copyright (C) 2010 Red Hat, Inc. All Rights Reserved.
- * Written by David Howells (dhowells@redhat.com)
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public Licence
- * as published by the Free Software Foundation; either version
- * 2 of the Licence, or (at your option) any later version.
- */
-
-#ifndef _ASM_IRQFLAGS_H
-#define _ASM_IRQFLAGS_H
-
-#include <asm/cpu-regs.h>
-/* linux/smp.h <- linux/irqflags.h needs asm/smp.h first */
-#include <asm/smp.h>
-
-/*
- * interrupt control
- * - "disabled": run in IM1/2
- *   - level 0 - kernel debugger
- *   - level 1 - virtual serial DMA (if present)
- *   - level 5 - normal interrupt priority
- *   - level 6 - timer interrupt
- * - "enabled":  run in IM7
- */
-#define MN10300_CLI_LEVEL	(CONFIG_LINUX_CLI_LEVEL << EPSW_IM_SHIFT)
-
-#ifndef __ASSEMBLY__
-
-static inline unsigned long arch_local_save_flags(void)
-{
-	unsigned long flags;
-
-	asm volatile("mov epsw,%0" : "=d"(flags));
-	return flags;
-}
-
-static inline void arch_local_irq_disable(void)
-{
-	asm volatile(
-		"	and %0,epsw	\n"
-		"	or %1,epsw	\n"
-		"	nop		\n"
-		"	nop		\n"
-		"	nop		\n"
-		:
-		: "i"(~EPSW_IM), "i"(EPSW_IE | MN10300_CLI_LEVEL)
-		: "memory");
-}
-
-static inline unsigned long arch_local_irq_save(void)
-{
-	unsigned long flags;
-
-	flags = arch_local_save_flags();
-	arch_local_irq_disable();
-	return flags;
-}
-
-/*
- * we make sure arch_irq_enable() doesn't cause priority inversion
- */
-extern unsigned long __mn10300_irq_enabled_epsw[];
-
-static inline void arch_local_irq_enable(void)
-{
-	unsigned long tmp;
-	int cpu = raw_smp_processor_id();
-
-	asm volatile(
-		"	mov	epsw,%0		\n"
-		"	and	%1,%0		\n"
-		"	or	%2,%0		\n"
-		"	mov	%0,epsw		\n"
-		: "=&d"(tmp)
-		: "i"(~EPSW_IM), "r"(__mn10300_irq_enabled_epsw[cpu])
-		: "memory", "cc");
-}
-
-static inline void arch_local_irq_restore(unsigned long flags)
-{
-	asm volatile(
-		"	mov %0,epsw	\n"
-		"	nop		\n"
-		"	nop		\n"
-		"	nop		\n"
-		:
-		: "d"(flags)
-		: "memory", "cc");
-}
-
-static inline bool arch_irqs_disabled_flags(unsigned long flags)
-{
-	return (flags & (EPSW_IE | EPSW_IM)) != (EPSW_IE | EPSW_IM_7);
-}
-
-static inline bool arch_irqs_disabled(void)
-{
-	return arch_irqs_disabled_flags(arch_local_save_flags());
-}
-
-/*
- * Hook to save power by halting the CPU
- * - called from the idle loop
- * - must reenable interrupts (which takes three instruction cycles to complete)
- */
-static inline void arch_safe_halt(void)
-{
-#ifdef CONFIG_SMP
-	arch_local_irq_enable();
-#else
-	asm volatile(
-		"	or	%0,epsw	\n"
-		"	nop		\n"
-		"	nop		\n"
-		"	bset	%2,(%1)	\n"
-		:
-		: "i"(EPSW_IE|EPSW_IM), "n"(&CPUM), "i"(CPUM_SLEEP)
-		: "cc");
-#endif
-}
-
-#define __sleep_cpu()				\
-do {						\
-	asm volatile(				\
-		"	bset	%1,(%0)\n"	\
-		"1:	btst	%1,(%0)\n"	\
-		"	bne	1b\n"		\
-		:				\
-		: "i"(&CPUM), "i"(CPUM_SLEEP)	\
-		: "cc"				\
-		);				\
-} while (0)
-
-static inline void arch_local_cli(void)
-{
-	asm volatile(
-		"	and	%0,epsw		\n"
-		"	nop			\n"
-		"	nop			\n"
-		"	nop			\n"
-		:
-		: "i"(~EPSW_IE)
-		: "memory"
-		);
-}
-
-static inline unsigned long arch_local_cli_save(void)
-{
-	unsigned long flags = arch_local_save_flags();
-	arch_local_cli();
-	return flags;
-}
-
-static inline void arch_local_sti(void)
-{
-	asm volatile(
-		"	or	%0,epsw		\n"
-		:
-		: "i"(EPSW_IE)
-		: "memory");
-}
-
-static inline void arch_local_change_intr_mask_level(unsigned long level)
-{
-	asm volatile(
-		"	and	%0,epsw		\n"
-		"	or	%1,epsw		\n"
-		:
-		: "i"(~EPSW_IM), "i"(EPSW_IE | level)
-		: "cc", "memory");
-}
-
-#else /* !__ASSEMBLY__ */
-
-#define LOCAL_SAVE_FLAGS(reg)			\
-	mov	epsw,reg
-
-#define LOCAL_IRQ_DISABLE				\
-	and	~EPSW_IM,epsw;				\
-	or	EPSW_IE|MN10300_CLI_LEVEL,epsw;		\
-	nop;						\
-	nop;						\
-	nop
-
-#define LOCAL_IRQ_ENABLE		\
-	or	EPSW_IE|EPSW_IM_7,epsw
-
-#define LOCAL_IRQ_RESTORE(reg)	\
-	mov	reg,epsw
-
-#define LOCAL_CLI_SAVE(reg)	\
-	mov	epsw,reg;	\
-	and	~EPSW_IE,epsw;	\
-	nop;			\
-	nop;			\
-	nop
-
-#define LOCAL_CLI		\
-	and	~EPSW_IE,epsw;	\
-	nop;			\
-	nop;			\
-	nop
-
-#define LOCAL_STI		\
-	or	EPSW_IE,epsw
-
-#define LOCAL_CHANGE_INTR_MASK_LEVEL(level)	\
-	and	~EPSW_IM,epsw;			\
-	or	EPSW_IE|(level),epsw
-
-#endif /* __ASSEMBLY__ */
-#endif /* _ASM_IRQFLAGS_H */

arch/mn10300/include/asm/kdebug.h

@@ -1,22 +0,0 @@
-/* MN10300 In-kernel death knells
- *
- * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
- * Written by David Howells (dhowells@redhat.com)
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public Licence
- * as published by the Free Software Foundation; either version
- * 2 of the Licence, or (at your option) any later version.
- */
-
-#ifndef _ASM_KDEBUG_H
-#define _ASM_KDEBUG_H
-
-/* Grossly misnamed. */
-enum die_val {
-	DIE_OOPS = 1,
-	DIE_BREAKPOINT,
-	DIE_GPF,
-};
-
-#endif /* _ASM_KDEBUG_H */

arch/mn10300/include/asm/kgdb.h

@@ -1,81 +0,0 @@
-/* Kernel debugger for MN10300
- *
- * Copyright (C) 2010 Red Hat, Inc. All Rights Reserved.
- * Written by David Howells (dhowells@redhat.com)
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public Licence
- * as published by the Free Software Foundation; either version
- * 2 of the Licence, or (at your option) any later version.
- */
-
-#ifndef _ASM_KGDB_H
-#define _ASM_KGDB_H
-
-/*
- * BUFMAX defines the maximum number of characters in inbound/outbound
- * buffers at least NUMREGBYTES*2 are needed for register packets
- * Longer buffer is needed to list all threads
- */
-#define BUFMAX			1024
-
-/*
- * Note that this register image is in a different order than the register
- * image that Linux produces at interrupt time.
- */
-enum regnames {
-	GDB_FR_D0		= 0,
-	GDB_FR_D1		= 1,
-	GDB_FR_D2		= 2,
-	GDB_FR_D3		= 3,
-	GDB_FR_A0		= 4,
-	GDB_FR_A1		= 5,
-	GDB_FR_A2		= 6,
-	GDB_FR_A3		= 7,
-
-	GDB_FR_SP		= 8,
-	GDB_FR_PC		= 9,
-	GDB_FR_MDR		= 10,
-	GDB_FR_EPSW		= 11,
-	GDB_FR_LIR		= 12,
-	GDB_FR_LAR		= 13,
-	GDB_FR_MDRQ		= 14,
-
-	GDB_FR_E0		= 15,
-	GDB_FR_E1		= 16,
-	GDB_FR_E2		= 17,
-	GDB_FR_E3		= 18,
-	GDB_FR_E4		= 19,
-	GDB_FR_E5		= 20,
-	GDB_FR_E6		= 21,
-	GDB_FR_E7		= 22,
-
-	GDB_FR_SSP		= 23,
-	GDB_FR_MSP		= 24,
-	GDB_FR_USP		= 25,
-	GDB_FR_MCRH		= 26,
-	GDB_FR_MCRL		= 27,
-	GDB_FR_MCVF		= 28,
-
-	GDB_FR_FPCR		= 29,
-	GDB_FR_DUMMY0		= 30,
-	GDB_FR_DUMMY1		= 31,
-
-	GDB_FR_FS0		= 32,
-
-	GDB_FR_SIZE		= 64,
-};
-
-#define GDB_ORIG_D0		41
-#define NUMREGBYTES		(GDB_FR_SIZE*4)
-
-static inline void arch_kgdb_breakpoint(void)
-{
-	asm(".globl __arch_kgdb_breakpoint; __arch_kgdb_breakpoint: break");
-}
-extern u8 __arch_kgdb_breakpoint;
-
-#define BREAK_INSTR_SIZE	1
-#define CACHE_FLUSH_IS_SAFE	1
-
-#endif /* _ASM_KGDB_H */

arch/mn10300/include/asm/kmap_types.h

@@ -1,7 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef _ASM_KMAP_TYPES_H
-#define _ASM_KMAP_TYPES_H
-
-#include <asm-generic/kmap_types.h>
-
-#endif /* _ASM_KMAP_TYPES_H */

arch/mn10300/include/asm/kprobes.h

@@ -1,55 +0,0 @@
-/* MN10300 Kernel Probes support
- *
- * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
- * Written by Mark Salter (msalter@redhat.com)
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public Licence as published by
- * the Free Software Foundation; either version 2 of the Licence, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public Licence for more details.
- *
- * You should have received a copy of the GNU General Public Licence
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
- *
- */
-#ifndef _ASM_KPROBES_H
-#define _ASM_KPROBES_H
-
-#include <asm-generic/kprobes.h>
-
-#define BREAKPOINT_INSTRUCTION	0xff
-
-#ifdef CONFIG_KPROBES
-#include <linux/types.h>
-#include <linux/ptrace.h>
-
-struct kprobe;
-
-typedef unsigned char kprobe_opcode_t;
-#define MAX_INSN_SIZE 8
-#define MAX_STACK_SIZE 128
-
-/* Architecture specific copy of original instruction */
-struct arch_specific_insn {
-	/*  copy of original instruction
-	 */
-	kprobe_opcode_t insn[MAX_INSN_SIZE];
-};
-
-extern const int kretprobe_blacklist_size;
-
-extern int kprobe_exceptions_notify(struct notifier_block *self,
-				    unsigned long val, void *data);
-
-#define flush_insn_slot(p)  do {} while (0)
-
-extern void arch_remove_kprobe(struct kprobe *p);
-
-#endif /* CONFIG_KPROBES */
-#endif /* _ASM_KPROBES_H */