MIPS: Use mips_gic_present() in place of gic_present

In preparation for removing the gic_present global variable, switch to
using the mips_gic_present() function instead. For the most part this is
a straightforward substitution. In cases which previously wrapped the
GIC case in an #ifdef CONFIG_MIPS_GIC that #ifdef has been removed,
since mips_gic_present() will return a compile-time constant false
allowing the affected code to be optimised out anyway.

Signed-off-by: Paul Burton <paul.burton@imgtec.com>
Cc: Jason Cooper <jason@lakedaemon.net>
Cc: Marc Zyngier <marc.zyngier@arm.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/17044/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

arch/mips/generic/irq.c

@@ -16,6 +16,7 @@
 #include <linux/types.h>
 
 #include <asm/irq.h>
+#include <asm/mips-cps.h>
 #include <asm/time.h>
 
 int get_c0_fdc_int(void)
@@ -24,7 +25,7 @@ int get_c0_fdc_int(void)
 
 	if (cpu_has_veic)
 		panic("Unimplemented!");
-	else if (gic_present)
+	else if (mips_gic_present())
 		mips_cpu_fdc_irq = gic_get_c0_fdc_int();
 	else if (cp0_fdc_irq >= 0)
 		mips_cpu_fdc_irq = MIPS_CPU_IRQ_BASE + cp0_fdc_irq;
@@ -40,7 +41,7 @@ int get_c0_perfcount_int(void)
 
 	if (cpu_has_veic)
 		panic("Unimplemented!");
-	else if (gic_present)
+	else if (mips_gic_present())
 		mips_cpu_perf_irq = gic_get_c0_perfcount_int();
 	else if (cp0_perfcount_irq >= 0)
 		mips_cpu_perf_irq = MIPS_CPU_IRQ_BASE + cp0_perfcount_irq;
@@ -56,7 +57,7 @@ unsigned int get_c0_compare_int(void)
 
 	if (cpu_has_veic)
 		panic("Unimplemented!");
-	else if (gic_present)
+	else if (mips_gic_present())
 		mips_cpu_timer_irq = gic_get_c0_compare_int();
 	else
 		mips_cpu_timer_irq = MIPS_CPU_IRQ_BASE + cp0_compare_irq;

arch/mips/kernel/smp-mt.c

@@ -21,7 +21,6 @@
 #include <linux/sched.h>
 #include <linux/cpumask.h>
 #include <linux/interrupt.h>
-#include <linux/irqchip/mips-gic.h>
 #include <linux/compiler.h>
 #include <linux/sched/task_stack.h>
 #include <linux/smp.h>
@@ -36,6 +35,7 @@
 #include <asm/mipsregs.h>
 #include <asm/mipsmtregs.h>
 #include <asm/mips_mt.h>
+#include <asm/mips-cps.h>
 
 static void __init smvp_copy_vpe_config(void)
 {
@@ -118,14 +118,12 @@ static void __init smvp_tc_init(unsigned int tc, unsigned int mvpconf0)
 
 static void vsmp_init_secondary(void)
 {
-#ifdef CONFIG_MIPS_GIC
 	/* This is Malta specific: IPI,performance and timer interrupts */
-	if (gic_present)
+	if (mips_gic_present())
 		change_c0_status(ST0_IM, STATUSF_IP2 | STATUSF_IP3 |
 					 STATUSF_IP4 | STATUSF_IP5 |
 					 STATUSF_IP6 | STATUSF_IP7);
 	else
-#endif
 		change_c0_status(ST0_IM, STATUSF_IP0 | STATUSF_IP1 |
 					 STATUSF_IP6 | STATUSF_IP7);
 }

arch/mips/lantiq/irq.c

@@ -61,10 +61,6 @@
 /* we have a cascade of 8 irqs */
 #define MIPS_CPU_IRQ_CASCADE		8
 
-#ifdef CONFIG_MIPS_MT_SMP
-int gic_present;
-#endif
-
 static int exin_avail;
 static u32 ltq_eiu_irq[MAX_EIU];
 static void __iomem *ltq_icu_membase[MAX_IM];

arch/mips/mti-malta/malta-int.c

@@ -19,7 +19,6 @@
 #include <linux/smp.h>
 #include <linux/interrupt.h>
 #include <linux/io.h>
-#include <linux/irqchip/mips-gic.h>
 #include <linux/of_irq.h>
 #include <linux/kernel_stat.h>
 #include <linux/kernel.h>
@@ -31,6 +30,7 @@
 #include <asm/irq_regs.h>
 #include <asm/mips-boards/malta.h>
 #include <asm/mips-boards/maltaint.h>
+#include <asm/mips-cps.h>
 #include <asm/gt64120.h>
 #include <asm/mips-boards/generic.h>
 #include <asm/mips-boards/msc01_pci.h>
@@ -214,7 +214,7 @@ void __init arch_init_irq(void)
 					msc_nr_irqs);
 	}
 
-	if (gic_present) {
+	if (mips_gic_present()) {
 		corehi_irq = MIPS_CPU_IRQ_BASE + MIPSCPU_INT_COREHI;
 	} else if (cpu_has_veic) {
 		set_vi_handler(MSC01E_INT_COREHI, corehi_irqdispatch);

arch/mips/mti-malta/malta-time.c

@@ -40,6 +40,7 @@
 #include <asm/time.h>
 #include <asm/mc146818-time.h>
 #include <asm/msc01_ic.h>
+#include <asm/mips-cps.h>
 
 #include <asm/mips-boards/generic.h>
 #include <asm/mips-boards/maltaint.h>
@@ -85,7 +86,7 @@ static void __init estimate_frequencies(void)
 
 	local_irq_save(flags);
 
-	if (gic_present)
+	if (mips_gic_present())
 		clear_gic_config(GIC_CONFIG_COUNTSTOP);
 
 	/*
@@ -95,7 +96,7 @@ static void __init estimate_frequencies(void)
 	while (CMOS_READ(RTC_REG_A) & RTC_UIP);
 	while (!(CMOS_READ(RTC_REG_A) & RTC_UIP));
 	start = read_c0_count();
-	if (gic_present)
+	if (mips_gic_present())
 		gicstart = read_gic_counter();
 
 	/* Wait for falling edge before reading RTC. */
@@ -105,7 +106,7 @@ static void __init estimate_frequencies(void)
 	/* Read counters again exactly on rising edge of update flag. */
 	while (!(CMOS_READ(RTC_REG_A) & RTC_UIP));
 	count = read_c0_count();
-	if (gic_present)
+	if (mips_gic_present())
 		giccount = read_gic_counter();
 
 	/* Wait for falling edge before reading RTC again. */
@@ -128,7 +129,7 @@ static void __init estimate_frequencies(void)
 	count /= secs;
 	mips_hpt_frequency = count;
 
-	if (gic_present) {
+	if (mips_gic_present()) {
 		giccount = div_u64(giccount - gicstart, secs);
 		gic_frequency = giccount;
 	}
@@ -154,7 +155,7 @@ int get_c0_fdc_int(void)
 
 	if (cpu_has_veic)
 		return -1;
-	else if (gic_present)
+	else if (mips_gic_present())
 		return gic_get_c0_fdc_int();
 	else if (cp0_fdc_irq >= 0)
 		return MIPS_CPU_IRQ_BASE + cp0_fdc_irq;
@@ -167,7 +168,7 @@ int get_c0_perfcount_int(void)
 	if (cpu_has_veic) {
 		set_vi_handler(MSC01E_INT_PERFCTR, mips_perf_dispatch);
 		mips_cpu_perf_irq = MSC01E_INT_BASE + MSC01E_INT_PERFCTR;
-	} else if (gic_present) {
+	} else if (mips_gic_present()) {
 		mips_cpu_perf_irq = gic_get_c0_perfcount_int();
 	} else if (cp0_perfcount_irq >= 0) {
 		mips_cpu_perf_irq = MIPS_CPU_IRQ_BASE + cp0_perfcount_irq;
@@ -184,7 +185,7 @@ unsigned int get_c0_compare_int(void)
 	if (cpu_has_veic) {
 		set_vi_handler(MSC01E_INT_CPUCTR, mips_timer_dispatch);
 		mips_cpu_timer_irq = MSC01E_INT_BASE + MSC01E_INT_CPUCTR;
-	} else if (gic_present) {
+	} else if (mips_gic_present()) {
 		mips_cpu_timer_irq = gic_get_c0_compare_int();
 	} else {
 		mips_cpu_timer_irq = MIPS_CPU_IRQ_BASE + cp0_compare_irq;
@@ -258,8 +259,7 @@ void __init plat_time_init(void)
 	setup_pit_timer();
 #endif
 
-#ifdef CONFIG_MIPS_GIC
-	if (gic_present) {
+	if (mips_gic_present()) {
 		freq = freqround(gic_frequency, 5000);
 		printk("GIC frequency %d.%02d MHz\n", freq/1000000,
 		       (freq%1000000)*100/1000000);
@@ -268,5 +268,4 @@ void __init plat_time_init(void)
 		timer_probe();
 #endif
 	}
-#endif
 }