MIPS: Alchemy: remove old clock support

With the clock framework in place, remove unused functions and bits,
and drop the CLK_IGNORE_UNUSED flag, which is now unneeded.

Signed-off-by: Manuel Lauss <manuel.lauss@gmail.com>
Cc: Linux-MIPS <linux-mips@linux-mips.org>
Patchwork: https://patchwork.linux-mips.org/patch/7473/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

arch/mips/alchemy/common/Makefile

@@ -5,7 +5,7 @@
 # Makefile for the Alchemy Au1xx0 CPUs, generic files.
 #
 
-obj-y += prom.o time.o clock.o clocks.o platform.o power.o \
+obj-y += prom.o time.o clock.o platform.o power.o \
 	 setup.o sleeper.o dma.o dbdma.o vss.o irq.o usb.o
 
 # optional gpiolib support

arch/mips/alchemy/common/clock.c

@@ -151,7 +151,7 @@ static struct clk __init *alchemy_clk_setup_cpu(const char *parent_name,
 	id.name = ALCHEMY_CPU_CLK;
 	id.parent_names = &parent_name;
 	id.num_parents = 1;
-	id.flags = CLK_IS_BASIC | CLK_IGNORE_UNUSED;
+	id.flags = CLK_IS_BASIC;
 	id.ops = &alchemy_clkops_cpu;
 	h->init = &id;
 
@@ -236,7 +236,7 @@ static struct clk __init *alchemy_clk_setup_aux(const char *parent_name,
 	id.name = name;
 	id.parent_names = &parent_name;
 	id.num_parents = 1;
-	id.flags = CLK_GET_RATE_NOCACHE | CLK_IGNORE_UNUSED;
+	id.flags = CLK_GET_RATE_NOCACHE;
 	id.ops = &alchemy_clkops_aux;
 
 	a->reg = reg;
@@ -743,8 +743,7 @@ static int __init alchemy_clk_init_fgens(int ctype)
 	default:
 		return -ENODEV;
 	}
-	id.flags = CLK_SET_RATE_PARENT | CLK_GET_RATE_NOCACHE |
-		   CLK_IGNORE_UNUSED;
+	id.flags = CLK_SET_RATE_PARENT | CLK_GET_RATE_NOCACHE;
 
 	a = kzalloc((sizeof(*a)) * 6, GFP_KERNEL);
 	if (!a)
@@ -942,8 +941,7 @@ static int __init alchemy_clk_setup_imux(int ctype)
 	id.ops = &alchemy_clkops_csrc;
 	id.parent_names = (const char **)alchemy_clk_csrc_parents;
 	id.num_parents = 7;
-	id.flags = CLK_SET_RATE_PARENT | CLK_GET_RATE_NOCACHE |
-		   CLK_IGNORE_UNUSED;
+	id.flags = CLK_SET_RATE_PARENT | CLK_GET_RATE_NOCACHE;
 
 	dt = alchemy_csrc_dt1;
 	switch (ctype) {

arch/mips/alchemy/common/clocks.c

@@ -1,86 +0,0 @@
-/*
- * BRIEF MODULE DESCRIPTION
- *	Simple Au1xx0 clocks routines.
- *
- * Copyright 2001, 2008 MontaVista Software Inc.
- * Author: MontaVista Software, Inc. <source@mvista.com>
- *
- *  This program is free software; you can redistribute	 it and/or modify it
- *  under  the terms of	 the GNU General  Public License as published by the
- *  Free Software Foundation;  either version 2 of the	License, or (at your
- *  option) any later version.
- *
- *  THIS  SOFTWARE  IS PROVIDED	  ``AS	IS'' AND   ANY	EXPRESS OR IMPLIED
- *  WARRANTIES,	  INCLUDING, BUT NOT  LIMITED  TO, THE IMPLIED WARRANTIES OF
- *  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN
- *  NO	EVENT  SHALL   THE AUTHOR  BE	 LIABLE FOR ANY	  DIRECT, INDIRECT,
- *  INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- *  NOT LIMITED	  TO, PROCUREMENT OF  SUBSTITUTE GOODS	OR SERVICES; LOSS OF
- *  USE, DATA,	OR PROFITS; OR	BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
- *  ANY THEORY OF LIABILITY, WHETHER IN	 CONTRACT, STRICT LIABILITY, OR TORT
- *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
- *  THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- *  You should have received a copy of the  GNU General Public License along
- *  with this program; if not, write  to the Free Software Foundation, Inc.,
- *  675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#include <linux/module.h>
-#include <linux/spinlock.h>
-#include <asm/time.h>
-#include <asm/mach-au1x00/au1000.h>
-
-/*
- * I haven't found anyone that doesn't use a 12 MHz source clock,
- * but just in case.....
- */
-#define AU1000_SRC_CLK	12000000
-
-static unsigned int au1x00_clock; /*  Hz */
-
-/*
- * Set the au1000_clock
- */
-void set_au1x00_speed(unsigned int new_freq)
-{
-	au1x00_clock = new_freq;
-}
-
-unsigned int get_au1x00_speed(void)
-{
-	return au1x00_clock;
-}
-EXPORT_SYMBOL(get_au1x00_speed);
-
-/*
- * We read the real processor speed from the PLL.  This is important
- * because it is more accurate than computing it from the 32 KHz
- * counter, if it exists.  If we don't have an accurate processor
- * speed, all of the peripherals that derive their clocks based on
- * this advertised speed will introduce error and sometimes not work
- * properly.  This function is further convoluted to still allow configurations
- * to do that in case they have really, really old silicon with a
- * write-only PLL register.			-- Dan
- */
-unsigned long au1xxx_calc_clock(void)
-{
-	unsigned long cpu_speed;
-
-	/*
-	 * On early Au1000, sys_cpupll was write-only. Since these
-	 * silicon versions of Au1000 are not sold by AMD, we don't bend
-	 * over backwards trying to determine the frequency.
-	 */
-	if (au1xxx_cpu_has_pll_wo())
-		cpu_speed = 396000000;
-	else
-		cpu_speed = (alchemy_rdsys(AU1000_SYS_CPUPLL) & 0x3f) * AU1000_SRC_CLK;
-
-	/* On Alchemy CPU:counter ratio is 1:1 */
-	mips_hpt_frequency = cpu_speed;
-
-	set_au1x00_speed(cpu_speed);
-
-	return cpu_speed;
-}

arch/mips/alchemy/common/setup.c

@@ -27,12 +27,9 @@
 
 #include <linux/init.h>
 #include <linux/ioport.h>
-#include <linux/jiffies.h>
-#include <linux/module.h>
 
 #include <asm/dma-coherence.h>
 #include <asm/mipsregs.h>
-#include <asm/time.h>
 
 #include <au1000.h>
 
@@ -41,18 +38,6 @@ extern void set_cpuspec(void);
 
 void __init plat_mem_setup(void)
 {
-	unsigned long est_freq;
-
-	/* determine core clock */
-	est_freq = au1xxx_calc_clock();
-	est_freq += 5000;    /* round */
-	est_freq -= est_freq % 10000;
-	printk(KERN_INFO "(PRId %08x) @ %lu.%02lu MHz\n", read_c0_prid(),
-	       est_freq / 1000000, ((est_freq % 1000000) * 100) / 1000000);
-
-	/* this is faster than wasting cycles trying to approximate it */
-	preset_lpj = (est_freq >> 1) / HZ;
-
 	if (au1xxx_cpu_needs_config_od())
 		/* Various early Au1xx0 errata corrected by this */
 		set_c0_config(1 << 19); /* Set Config[OD] */

arch/mips/include/asm/mach-au1x00/au1000.h

@@ -470,72 +470,8 @@
 
 /* Clock Controller */
 #define AU1000_SYS_FREQCTRL0	0x20
-#  define SYS_FC_FRDIV2_BIT	22
-#  define SYS_FC_FRDIV2_MASK	(0xff << SYS_FC_FRDIV2_BIT)
-#  define SYS_FC_FE2		(1 << 21)
-#  define SYS_FC_FS2		(1 << 20)
-#  define SYS_FC_FRDIV1_BIT	12
-#  define SYS_FC_FRDIV1_MASK	(0xff << SYS_FC_FRDIV1_BIT)
-#  define SYS_FC_FE1		(1 << 11)
-#  define SYS_FC_FS1		(1 << 10)
-#  define SYS_FC_FRDIV0_BIT	2
-#  define SYS_FC_FRDIV0_MASK	(0xff << SYS_FC_FRDIV0_BIT)
-#  define SYS_FC_FE0		(1 << 1)
-#  define SYS_FC_FS0		(1 << 0)
 #define AU1000_SYS_FREQCTRL1	0x24
-#  define SYS_FC_FRDIV5_BIT	22
-#  define SYS_FC_FRDIV5_MASK	(0xff << SYS_FC_FRDIV5_BIT)
-#  define SYS_FC_FE5		(1 << 21)
-#  define SYS_FC_FS5		(1 << 20)
-#  define SYS_FC_FRDIV4_BIT	12
-#  define SYS_FC_FRDIV4_MASK	(0xff << SYS_FC_FRDIV4_BIT)
-#  define SYS_FC_FE4		(1 << 11)
-#  define SYS_FC_FS4		(1 << 10)
-#  define SYS_FC_FRDIV3_BIT	2
-#  define SYS_FC_FRDIV3_MASK	(0xff << SYS_FC_FRDIV3_BIT)
-#  define SYS_FC_FE3		(1 << 1)
-#  define SYS_FC_FS3		(1 << 0)
 #define AU1000_SYS_CLKSRC	0x28
-#  define SYS_CS_ME1_BIT	27
-#  define SYS_CS_ME1_MASK	(0x7 << SYS_CS_ME1_BIT)
-#  define SYS_CS_DE1		(1 << 26)
-#  define SYS_CS_CE1		(1 << 25)
-#  define SYS_CS_ME0_BIT	22
-#  define SYS_CS_ME0_MASK	(0x7 << SYS_CS_ME0_BIT)
-#  define SYS_CS_DE0		(1 << 21)
-#  define SYS_CS_CE0		(1 << 20)
-#  define SYS_CS_MI2_BIT	17
-#  define SYS_CS_MI2_MASK	(0x7 << SYS_CS_MI2_BIT)
-#  define SYS_CS_DI2		(1 << 16)
-#  define SYS_CS_CI2		(1 << 15)
-
-#  define SYS_CS_ML_BIT		7
-#  define SYS_CS_ML_MASK	(0x7 << SYS_CS_ML_BIT)
-#  define SYS_CS_DL		(1 << 6)
-#  define SYS_CS_CL		(1 << 5)
-
-#  define SYS_CS_MUH_BIT	12
-#  define SYS_CS_MUH_MASK	(0x7 << SYS_CS_MUH_BIT)
-#  define SYS_CS_DUH		(1 << 11)
-#  define SYS_CS_CUH		(1 << 10)
-#  define SYS_CS_MUD_BIT	7
-#  define SYS_CS_MUD_MASK	(0x7 << SYS_CS_MUD_BIT)
-#  define SYS_CS_DUD		(1 << 6)
-#  define SYS_CS_CUD		(1 << 5)
-
-#  define SYS_CS_MIR_BIT	2
-#  define SYS_CS_MIR_MASK	(0x7 << SYS_CS_MIR_BIT)
-#  define SYS_CS_DIR		(1 << 1)
-#  define SYS_CS_CIR		(1 << 0)
-
-#  define SYS_CS_MUX_AUX	0x1
-#  define SYS_CS_MUX_FQ0	0x2
-#  define SYS_CS_MUX_FQ1	0x3
-#  define SYS_CS_MUX_FQ2	0x4
-#  define SYS_CS_MUX_FQ3	0x5
-#  define SYS_CS_MUX_FQ4	0x6
-#  define SYS_CS_MUX_FQ5	0x7
-
 #define AU1000_SYS_CPUPLL	0x60
 #define AU1000_SYS_AUXPLL	0x64
 #define AU1300_SYS_AUXPLL2	0x68
@@ -841,11 +777,6 @@ static inline int alchemy_get_macs(int type)
 	return 0;
 }
 
-/* arch/mips/au1000/common/clocks.c */
-extern void set_au1x00_speed(unsigned int new_freq);
-extern unsigned int get_au1x00_speed(void);
-extern unsigned long au1xxx_calc_clock(void);
-
 /* PM: arch/mips/alchemy/common/sleeper.S, power.c, irq.c */
 void alchemy_sleep_au1000(void);
 void alchemy_sleep_au1550(void);