powerpc/powernv: Remove OPALv2 firmware define and references

OPALv2 only ever existed in the lab and didn't escape to the world.
All OPAL systems in the wild are OPALv3.

The probability of there being an OPALv2 system still powered on
anywhere inside IBM is approximately zero, let alone anyone
expecting to run mainline kernels.

So, start to remove references to OPALv2.

Signed-off-by: Stewart Smith <stewart@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

arch/powerpc/include/asm/firmware.h

@@ -47,7 +47,6 @@
 #define FW_FEATURE_VPHN		ASM_CONST(0x0000000004000000)
 #define FW_FEATURE_XCMO		ASM_CONST(0x0000000008000000)
 #define FW_FEATURE_OPAL		ASM_CONST(0x0000000010000000)
-#define FW_FEATURE_OPALv2	ASM_CONST(0x0000000020000000)
 #define FW_FEATURE_SET_MODE	ASM_CONST(0x0000000040000000)
 #define FW_FEATURE_BEST_ENERGY	ASM_CONST(0x0000000080000000)
 #define FW_FEATURE_TYPE1_AFFINITY ASM_CONST(0x0000000100000000)
@@ -70,8 +69,7 @@ enum {
 		FW_FEATURE_SET_MODE | FW_FEATURE_BEST_ENERGY |
 		FW_FEATURE_TYPE1_AFFINITY | FW_FEATURE_PRRN,
 	FW_FEATURE_PSERIES_ALWAYS = 0,
-	FW_FEATURE_POWERNV_POSSIBLE = FW_FEATURE_OPAL | FW_FEATURE_OPALv2 |
-		FW_FEATURE_OPALv3,
+	FW_FEATURE_POWERNV_POSSIBLE = FW_FEATURE_OPAL | FW_FEATURE_OPALv3,
 	FW_FEATURE_POWERNV_ALWAYS = 0,
 	FW_FEATURE_PS3_POSSIBLE = FW_FEATURE_LPAR | FW_FEATURE_PS3_LV1,
 	FW_FEATURE_PS3_ALWAYS = FW_FEATURE_LPAR | FW_FEATURE_PS3_LV1,

arch/powerpc/platforms/powernv/opal.c

@@ -100,7 +100,6 @@ int __init early_init_dt_scan_opal(unsigned long node,
 
 	powerpc_firmware_features |= FW_FEATURE_OPAL;
 	if (of_flat_dt_is_compatible(node, "ibm,opal-v3")) {
-		powerpc_firmware_features |= FW_FEATURE_OPALv2;
 		powerpc_firmware_features |= FW_FEATURE_OPALv3;
 		pr_info("OPAL V3 detected !\n");
 	} else {
@@ -349,7 +348,7 @@ int opal_put_chars(uint32_t vtermno, const char *data, int total_len)
 	 * enough room and be done with it
 	 */
 	spin_lock_irqsave(&opal_write_lock, flags);
-	if (firmware_has_feature(FW_FEATURE_OPALv2)) {
+	if (firmware_has_feature(FW_FEATURE_OPALv3)) {
 		rc = opal_console_write_buffer_space(vtermno, &olen);
 		len = be64_to_cpu(olen);
 		if (rc || len < total_len) {
@@ -693,10 +692,7 @@ static int __init opal_init(void)
 	}
 
 	/* Register OPAL consoles if any ports */
-	if (firmware_has_feature(FW_FEATURE_OPALv2))
-		consoles = of_find_node_by_path("/ibm,opal/consoles");
-	else
-		consoles = of_node_get(opal_node);
+	consoles = of_find_node_by_path("/ibm,opal/consoles");
 	if (consoles) {
 		for_each_child_of_node(consoles, np) {
 			if (strcmp(np->name, "serial"))

arch/powerpc/platforms/powernv/setup.c

@@ -92,10 +92,6 @@ static void pnv_show_cpuinfo(struct seq_file *m)
 	seq_printf(m, "machine\t\t: PowerNV %s\n", model);
 	if (firmware_has_feature(FW_FEATURE_OPALv3))
 		seq_printf(m, "firmware\t: OPAL v3\n");
-	else if (firmware_has_feature(FW_FEATURE_OPALv2))
-		seq_printf(m, "firmware\t: OPAL v2\n");
-	else if (firmware_has_feature(FW_FEATURE_OPAL))
-		seq_printf(m, "firmware\t: OPAL v1\n");
 	else
 		seq_printf(m, "firmware\t: BML\n");
 	of_node_put(root);

arch/powerpc/platforms/powernv/smp.c

@@ -65,10 +65,10 @@ static int pnv_smp_kick_cpu(int nr)
 	BUG_ON(nr < 0 || nr >= NR_CPUS);
 
 	/*
-	 * If we already started or OPALv2 is not supported, we just
+	 * If we already started or OPALv3 is not supported, we just
 	 * kick the CPU via the PACA
 	 */
-	if (paca[nr].cpu_start || !firmware_has_feature(FW_FEATURE_OPALv2))
+	if (paca[nr].cpu_start || !firmware_has_feature(FW_FEATURE_OPALv3))
 		goto kick;
 
 	/*