Merge branch 'bnx2x'

Yuval Mintz says:

====================
bnx2x: Bug fixes patch series

Most of what this parch series contains is SR-IOV related bug fixes.
Additionally, it contains some small fixes for legacy devices/modes.

Please consider applying these patches to `net'.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

drivers/net/ethernet/broadcom/bnx2x/bnx2x.h

@@ -1250,7 +1250,10 @@ struct bnx2x_slowpath {
 	 * Therefore, if they would have been defined in the same union,
 	 * data can get corrupted.
 	 */
-	struct afex_vif_list_ramrod_data func_afex_rdata;
+	union {
+		struct afex_vif_list_ramrod_data	viflist_data;
+		struct function_update_data		func_update;
+	} func_afex_rdata;
 
 	/* used by dmae command executer */
 	struct dmae_command		dmae[MAX_DMAE_C];
@@ -2499,4 +2502,6 @@ void bnx2x_set_local_cmng(struct bnx2x *bp);
 #define MCPR_SCRATCH_BASE(bp) \
 	(CHIP_IS_E1x(bp) ? MCP_REG_MCPR_SCRATCH : MCP_A_REG_MCPR_SCRATCH)
 
+#define E1H_MAX_MF_SB_COUNT (HC_SB_MAX_SB_E1X/(E1HVN_MAX * PORT_MAX))
+
 #endif /* bnx2x.h */

drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c

@@ -11447,9 +11447,9 @@ static int bnx2x_get_hwinfo(struct bnx2x *bp)
 		}
 	}
 
-	/* adjust igu_sb_cnt to MF for E1x */
-	if (CHIP_IS_E1x(bp) && IS_MF(bp))
-		bp->igu_sb_cnt /= E1HVN_MAX;
+	/* adjust igu_sb_cnt to MF for E1H */
+	if (CHIP_IS_E1H(bp) && IS_MF(bp))
+		bp->igu_sb_cnt = min_t(u8, bp->igu_sb_cnt, E1H_MAX_MF_SB_COUNT);
 
 	/* port info */
 	bnx2x_get_port_hwinfo(bp);

drivers/net/ethernet/broadcom/bnx2x/bnx2x_sp.c

@@ -2038,6 +2038,7 @@ static int bnx2x_vlan_mac_del_all(struct bnx2x *bp,
 	struct bnx2x_vlan_mac_ramrod_params p;
 	struct bnx2x_exe_queue_obj *exeq = &o->exe_queue;
 	struct bnx2x_exeq_elem *exeq_pos, *exeq_pos_n;
+	unsigned long flags;
 	int read_lock;
 	int rc = 0;
 
@@ -2046,8 +2047,9 @@ static int bnx2x_vlan_mac_del_all(struct bnx2x *bp,
 	spin_lock_bh(&exeq->lock);
 
 	list_for_each_entry_safe(exeq_pos, exeq_pos_n, &exeq->exe_queue, link) {
-		if (exeq_pos->cmd_data.vlan_mac.vlan_mac_flags ==
-		    *vlan_mac_flags) {
+		flags = exeq_pos->cmd_data.vlan_mac.vlan_mac_flags;
+		if (BNX2X_VLAN_MAC_CMP_FLAGS(flags) ==
+		    BNX2X_VLAN_MAC_CMP_FLAGS(*vlan_mac_flags)) {
 			rc = exeq->remove(bp, exeq->owner, exeq_pos);
 			if (rc) {
 				BNX2X_ERR("Failed to remove command\n");
@@ -2080,7 +2082,9 @@ static int bnx2x_vlan_mac_del_all(struct bnx2x *bp,
 		return read_lock;
 
 	list_for_each_entry(pos, &o->head, link) {
-		if (pos->vlan_mac_flags == *vlan_mac_flags) {
+		flags = pos->vlan_mac_flags;
+		if (BNX2X_VLAN_MAC_CMP_FLAGS(flags) ==
+		    BNX2X_VLAN_MAC_CMP_FLAGS(*vlan_mac_flags)) {
 			p.user_req.vlan_mac_flags = pos->vlan_mac_flags;
 			memcpy(&p.user_req.u, &pos->u, sizeof(pos->u));
 			rc = bnx2x_config_vlan_mac(bp, &p);
@@ -4382,8 +4386,11 @@ int bnx2x_config_rss(struct bnx2x *bp,
 	struct bnx2x_raw_obj *r = &o->raw;
 
 	/* Do nothing if only driver cleanup was requested */
-	if (test_bit(RAMROD_DRV_CLR_ONLY, &p->ramrod_flags))
+	if (test_bit(RAMROD_DRV_CLR_ONLY, &p->ramrod_flags)) {
+		DP(BNX2X_MSG_SP, "Not configuring RSS ramrod_flags=%lx\n",
+		   p->ramrod_flags);
 		return 0;
+	}
 
 	r->set_pending(r);
 

drivers/net/ethernet/broadcom/bnx2x/bnx2x_sp.h

@@ -266,6 +266,13 @@ enum {
 	BNX2X_DONT_CONSUME_CAM_CREDIT,
 	BNX2X_DONT_CONSUME_CAM_CREDIT_DEST,
 };
+/* When looking for matching filters, some flags are not interesting */
+#define BNX2X_VLAN_MAC_CMP_MASK	(1 << BNX2X_UC_LIST_MAC | \
+				 1 << BNX2X_ETH_MAC | \
+				 1 << BNX2X_ISCSI_ETH_MAC | \
+				 1 << BNX2X_NETQ_ETH_MAC)
+#define BNX2X_VLAN_MAC_CMP_FLAGS(flags) \
+	((flags) & BNX2X_VLAN_MAC_CMP_MASK)
 
 struct bnx2x_vlan_mac_ramrod_params {
 	/* Object to run the command from */

drivers/net/ethernet/broadcom/bnx2x/bnx2x_sriov.c

@@ -1209,6 +1209,11 @@ static void bnx2x_vfop_rxmode(struct bnx2x *bp, struct bnx2x_virtf *vf)
 		/* next state */
 		vfop->state = BNX2X_VFOP_RXMODE_DONE;
 
+		/* record the accept flags in vfdb so hypervisor can modify them
+		 * if necessary
+		 */
+		bnx2x_vfq(vf, ramrod->cl_id - vf->igu_base_id, accept_flags) =
+			ramrod->rx_accept_flags;
 		vfop->rc = bnx2x_config_rx_mode(bp, ramrod);
 		bnx2x_vfop_finalize(vf, vfop->rc, VFOP_DONE);
 op_err:
@@ -1224,39 +1229,43 @@ op_pending:
 	return;
 }
 
+static void bnx2x_vf_prep_rx_mode(struct bnx2x *bp, u8 qid,
+				  struct bnx2x_rx_mode_ramrod_params *ramrod,
+				  struct bnx2x_virtf *vf,
+				  unsigned long accept_flags)
+{
+	struct bnx2x_vf_queue *vfq = vfq_get(vf, qid);
+
+	memset(ramrod, 0, sizeof(*ramrod));
+	ramrod->cid = vfq->cid;
+	ramrod->cl_id = vfq_cl_id(vf, vfq);
+	ramrod->rx_mode_obj = &bp->rx_mode_obj;
+	ramrod->func_id = FW_VF_HANDLE(vf->abs_vfid);
+	ramrod->rx_accept_flags = accept_flags;
+	ramrod->tx_accept_flags = accept_flags;
+	ramrod->pstate = &vf->filter_state;
+	ramrod->state = BNX2X_FILTER_RX_MODE_PENDING;
+
+	set_bit(BNX2X_FILTER_RX_MODE_PENDING, &vf->filter_state);
+	set_bit(RAMROD_RX, &ramrod->ramrod_flags);
+	set_bit(RAMROD_TX, &ramrod->ramrod_flags);
+
+	ramrod->rdata = bnx2x_vf_sp(bp, vf, rx_mode_rdata.e2);
+	ramrod->rdata_mapping = bnx2x_vf_sp_map(bp, vf, rx_mode_rdata.e2);
+}
+
 int bnx2x_vfop_rxmode_cmd(struct bnx2x *bp,
 			  struct bnx2x_virtf *vf,
 			  struct bnx2x_vfop_cmd *cmd,
 			  int qid, unsigned long accept_flags)
 {
-	struct bnx2x_vf_queue *vfq = vfq_get(vf, qid);
 	struct bnx2x_vfop *vfop = bnx2x_vfop_add(bp, vf);
 
 	if (vfop) {
 		struct bnx2x_rx_mode_ramrod_params *ramrod =
 			&vf->op_params.rx_mode;
 
-		memset(ramrod, 0, sizeof(*ramrod));
-
-		/* Prepare ramrod parameters */
-		ramrod->cid = vfq->cid;
-		ramrod->cl_id = vfq_cl_id(vf, vfq);
-		ramrod->rx_mode_obj = &bp->rx_mode_obj;
-		ramrod->func_id = FW_VF_HANDLE(vf->abs_vfid);
-
-		ramrod->rx_accept_flags = accept_flags;
-		ramrod->tx_accept_flags = accept_flags;
-		ramrod->pstate = &vf->filter_state;
-		ramrod->state = BNX2X_FILTER_RX_MODE_PENDING;
-
-		set_bit(BNX2X_FILTER_RX_MODE_PENDING, &vf->filter_state);
-		set_bit(RAMROD_RX, &ramrod->ramrod_flags);
-		set_bit(RAMROD_TX, &ramrod->ramrod_flags);
-
-		ramrod->rdata =
-			bnx2x_vf_sp(bp, vf, rx_mode_rdata.e2);
-		ramrod->rdata_mapping =
-			bnx2x_vf_sp_map(bp, vf, rx_mode_rdata.e2);
+		bnx2x_vf_prep_rx_mode(bp, qid, ramrod, vf, accept_flags);
 
 		bnx2x_vfop_opset(BNX2X_VFOP_RXMODE_CONFIG,
 				 bnx2x_vfop_rxmode, cmd->done);
@@ -3202,13 +3211,16 @@ int bnx2x_enable_sriov(struct bnx2x *bp)
 		bnx2x_iov_static_resc(bp, vf);
 	}
 
-	/* prepare msix vectors in VF configuration space */
+	/* prepare msix vectors in VF configuration space - the value in the
+	 * PCI configuration space should be the index of the last entry,
+	 * namely one less than the actual size of the table
+	 */
 	for (vf_idx = first_vf; vf_idx < first_vf + req_vfs; vf_idx++) {
 		bnx2x_pretend_func(bp, HW_VF_HANDLE(bp, vf_idx));
 		REG_WR(bp, PCICFG_OFFSET + GRC_CONFIG_REG_VF_MSIX_CONTROL,
-		       num_vf_queues);
+		       num_vf_queues - 1);
 		DP(BNX2X_MSG_IOV, "set msix vec num in VF %d cfg space to %d\n",
-		   vf_idx, num_vf_queues);
+		   vf_idx, num_vf_queues - 1);
 	}
 	bnx2x_pretend_func(bp, BP_ABS_FUNC(bp));
 
@@ -3436,10 +3448,18 @@ out:
 
 int bnx2x_set_vf_vlan(struct net_device *dev, int vfidx, u16 vlan, u8 qos)
 {
+	struct bnx2x_queue_state_params q_params = {NULL};
+	struct bnx2x_vlan_mac_ramrod_params ramrod_param;
+	struct bnx2x_queue_update_params *update_params;
+	struct pf_vf_bulletin_content *bulletin = NULL;
+	struct bnx2x_rx_mode_ramrod_params rx_ramrod;
 	struct bnx2x *bp = netdev_priv(dev);
-	int rc, q_logical_state;
+	struct bnx2x_vlan_mac_obj *vlan_obj;
+	unsigned long vlan_mac_flags = 0;
+	unsigned long ramrod_flags = 0;
 	struct bnx2x_virtf *vf = NULL;
-	struct pf_vf_bulletin_content *bulletin = NULL;
+	unsigned long accept_flags;
+	int rc;
 
 	/* sanity and init */
 	rc = bnx2x_vf_ndo_prep(bp, vfidx, &vf, &bulletin);
@@ -3457,104 +3477,118 @@ int bnx2x_set_vf_vlan(struct net_device *dev, int vfidx, u16 vlan, u8 qos)
 	/* update PF's copy of the VF's bulletin. No point in posting the vlan
 	 * to the VF since it doesn't have anything to do with it. But it useful
 	 * to store it here in case the VF is not up yet and we can only
-	 * configure the vlan later when it does.
+	 * configure the vlan later when it does. Treat vlan id 0 as remove the
+	 * Host tag.
 	 */
-	bulletin->valid_bitmap |= 1 << VLAN_VALID;
+	if (vlan > 0)
+		bulletin->valid_bitmap |= 1 << VLAN_VALID;
+	else
+		bulletin->valid_bitmap &= ~(1 << VLAN_VALID);
 	bulletin->vlan = vlan;
 
 	/* is vf initialized and queue set up? */
-	q_logical_state =
-		bnx2x_get_q_logical_state(bp, &bnx2x_leading_vfq(vf, sp_obj));
-	if (vf->state == VF_ENABLED &&
-	    q_logical_state == BNX2X_Q_LOGICAL_STATE_ACTIVE) {
-		/* configure the vlan in device on this vf's queue */
-		unsigned long ramrod_flags = 0;
-		unsigned long vlan_mac_flags = 0;
-		struct bnx2x_vlan_mac_obj *vlan_obj =
-			&bnx2x_leading_vfq(vf, vlan_obj);
-		struct bnx2x_vlan_mac_ramrod_params ramrod_param;
-		struct bnx2x_queue_state_params q_params = {NULL};
-		struct bnx2x_queue_update_params *update_params;
+	if (vf->state != VF_ENABLED ||
+	    bnx2x_get_q_logical_state(bp, &bnx2x_leading_vfq(vf, sp_obj)) !=
+	    BNX2X_Q_LOGICAL_STATE_ACTIVE)
+		return rc;
 
-		rc = validate_vlan_mac(bp, &bnx2x_leading_vfq(vf, mac_obj));
-		if (rc)
-			return rc;
-		memset(&ramrod_param, 0, sizeof(ramrod_param));
+	/* configure the vlan in device on this vf's queue */
+	vlan_obj = &bnx2x_leading_vfq(vf, vlan_obj);
+	rc = validate_vlan_mac(bp, &bnx2x_leading_vfq(vf, mac_obj));
+	if (rc)
+		return rc;
 
-		/* must lock vfpf channel to protect against vf flows */
-		bnx2x_lock_vf_pf_channel(bp, vf, CHANNEL_TLV_PF_SET_VLAN);
+	/* must lock vfpf channel to protect against vf flows */
+	bnx2x_lock_vf_pf_channel(bp, vf, CHANNEL_TLV_PF_SET_VLAN);
 
-		/* remove existing vlans */
-		__set_bit(RAMROD_COMP_WAIT, &ramrod_flags);
-		rc = vlan_obj->delete_all(bp, vlan_obj, &vlan_mac_flags,
-					  &ramrod_flags);
-		if (rc) {
-			BNX2X_ERR("failed to delete vlans\n");
-			rc = -EINVAL;
-			goto out;
-		}
+	/* remove existing vlans */
+	__set_bit(RAMROD_COMP_WAIT, &ramrod_flags);
+	rc = vlan_obj->delete_all(bp, vlan_obj, &vlan_mac_flags,
+				  &ramrod_flags);
+	if (rc) {
+		BNX2X_ERR("failed to delete vlans\n");
+		rc = -EINVAL;
+		goto out;
+	}
+
+	/* need to remove/add the VF's accept_any_vlan bit */
+	accept_flags = bnx2x_leading_vfq(vf, accept_flags);
+	if (vlan)
+		clear_bit(BNX2X_ACCEPT_ANY_VLAN, &accept_flags);
+	else
+		set_bit(BNX2X_ACCEPT_ANY_VLAN, &accept_flags);
+
+	bnx2x_vf_prep_rx_mode(bp, LEADING_IDX, &rx_ramrod, vf,
+			      accept_flags);
+	bnx2x_leading_vfq(vf, accept_flags) = accept_flags;
+	bnx2x_config_rx_mode(bp, &rx_ramrod);
+
+	/* configure the new vlan to device */
+	memset(&ramrod_param, 0, sizeof(ramrod_param));
+	__set_bit(RAMROD_COMP_WAIT, &ramrod_flags);
+	ramrod_param.vlan_mac_obj = vlan_obj;
+	ramrod_param.ramrod_flags = ramrod_flags;
+	set_bit(BNX2X_DONT_CONSUME_CAM_CREDIT,
+		&ramrod_param.user_req.vlan_mac_flags);
+	ramrod_param.user_req.u.vlan.vlan = vlan;
+	ramrod_param.user_req.cmd = BNX2X_VLAN_MAC_ADD;
+	rc = bnx2x_config_vlan_mac(bp, &ramrod_param);
+	if (rc) {
+		BNX2X_ERR("failed to configure vlan\n");
+		rc =  -EINVAL;
+		goto out;
+	}
 
-		/* send queue update ramrod to configure default vlan and silent
-		 * vlan removal
+	/* send queue update ramrod to configure default vlan and silent
+	 * vlan removal
+	 */
+	__set_bit(RAMROD_COMP_WAIT, &q_params.ramrod_flags);
+	q_params.cmd = BNX2X_Q_CMD_UPDATE;
+	q_params.q_obj = &bnx2x_leading_vfq(vf, sp_obj);
+	update_params = &q_params.params.update;
+	__set_bit(BNX2X_Q_UPDATE_DEF_VLAN_EN_CHNG,
+		  &update_params->update_flags);
+	__set_bit(BNX2X_Q_UPDATE_SILENT_VLAN_REM_CHNG,
+		  &update_params->update_flags);
+	if (vlan == 0) {
+		/* if vlan is 0 then we want to leave the VF traffic
+		 * untagged, and leave the incoming traffic untouched
+		 * (i.e. do not remove any vlan tags).
 		 */
-		__set_bit(RAMROD_COMP_WAIT, &q_params.ramrod_flags);
-		q_params.cmd = BNX2X_Q_CMD_UPDATE;
-		q_params.q_obj = &bnx2x_leading_vfq(vf, sp_obj);
-		update_params = &q_params.params.update;
-		__set_bit(BNX2X_Q_UPDATE_DEF_VLAN_EN_CHNG,
+		__clear_bit(BNX2X_Q_UPDATE_DEF_VLAN_EN,
+			    &update_params->update_flags);
+		__clear_bit(BNX2X_Q_UPDATE_SILENT_VLAN_REM,
+			    &update_params->update_flags);
+	} else {
+		/* configure default vlan to vf queue and set silent
+		 * vlan removal (the vf remains unaware of this vlan).
+		 */
+		__set_bit(BNX2X_Q_UPDATE_DEF_VLAN_EN,
 			  &update_params->update_flags);
-		__set_bit(BNX2X_Q_UPDATE_SILENT_VLAN_REM_CHNG,
+		__set_bit(BNX2X_Q_UPDATE_SILENT_VLAN_REM,
 			  &update_params->update_flags);
+		update_params->def_vlan = vlan;
+		update_params->silent_removal_value =
+			vlan & VLAN_VID_MASK;
+		update_params->silent_removal_mask = VLAN_VID_MASK;
+	}
 
-		if (vlan == 0) {
-			/* if vlan is 0 then we want to leave the VF traffic
-			 * untagged, and leave the incoming traffic untouched
-			 * (i.e. do not remove any vlan tags).
-			 */
-			__clear_bit(BNX2X_Q_UPDATE_DEF_VLAN_EN,
-				    &update_params->update_flags);
-			__clear_bit(BNX2X_Q_UPDATE_SILENT_VLAN_REM,
-				    &update_params->update_flags);
-		} else {
-			/* configure the new vlan to device */
-			__set_bit(RAMROD_COMP_WAIT, &ramrod_flags);
-			ramrod_param.vlan_mac_obj = vlan_obj;
-			ramrod_param.ramrod_flags = ramrod_flags;
-			ramrod_param.user_req.u.vlan.vlan = vlan;
-			ramrod_param.user_req.cmd = BNX2X_VLAN_MAC_ADD;
-			rc = bnx2x_config_vlan_mac(bp, &ramrod_param);
-			if (rc) {
-				BNX2X_ERR("failed to configure vlan\n");
-				rc =  -EINVAL;
-				goto out;
-			}
-
-			/* configure default vlan to vf queue and set silent
-			 * vlan removal (the vf remains unaware of this vlan).
-			 */
-			update_params = &q_params.params.update;
-			__set_bit(BNX2X_Q_UPDATE_DEF_VLAN_EN,
-				  &update_params->update_flags);
-			__set_bit(BNX2X_Q_UPDATE_SILENT_VLAN_REM,
-				  &update_params->update_flags);
-			update_params->def_vlan = vlan;
-		}
+	/* Update the Queue state */
+	rc = bnx2x_queue_state_change(bp, &q_params);
+	if (rc) {
+		BNX2X_ERR("Failed to configure default VLAN\n");
+		goto out;
+	}
 
-		/* Update the Queue state */
-		rc = bnx2x_queue_state_change(bp, &q_params);
-		if (rc) {
-			BNX2X_ERR("Failed to configure default VLAN\n");
-			goto out;
-		}
 
-		/* clear the flag indicating that this VF needs its vlan
-		 * (will only be set if the HV configured the Vlan before vf was
-		 * up and we were called because the VF came up later
-		 */
+	/* clear the flag indicating that this VF needs its vlan
+	 * (will only be set if the HV configured the Vlan before vf was
+	 * up and we were called because the VF came up later
+	 */
 out:
-		vf->cfg_flags &= ~VF_CFG_VLAN;
-		bnx2x_unlock_vf_pf_channel(bp, vf, CHANNEL_TLV_PF_SET_VLAN);
-	}
+	vf->cfg_flags &= ~VF_CFG_VLAN;
+	bnx2x_unlock_vf_pf_channel(bp, vf, CHANNEL_TLV_PF_SET_VLAN);
+
 	return rc;
 }
 

drivers/net/ethernet/broadcom/bnx2x/bnx2x_sriov.h

@@ -74,6 +74,7 @@ struct bnx2x_vf_queue {
 	/* VLANs object */
 	struct bnx2x_vlan_mac_obj	vlan_obj;
 	atomic_t vlan_count;		/* 0 means vlan-0 is set  ~ untagged */
+	unsigned long accept_flags;	/* last accept flags configured */
 
 	/* Queue Slow-path State object */
 	struct bnx2x_queue_sp_obj	sp_obj;

drivers/net/ethernet/broadcom/bnx2x/bnx2x_vfpf.c

@@ -1598,6 +1598,8 @@ static void bnx2x_vfop_mbx_qfilters(struct bnx2x *bp, struct bnx2x_virtf *vf)
 
 		if (msg->flags & VFPF_SET_Q_FILTERS_RX_MASK_CHANGED) {
 			unsigned long accept = 0;
+			struct pf_vf_bulletin_content *bulletin =
+				BP_VF_BULLETIN(bp, vf->index);
 
 			/* covert VF-PF if mask to bnx2x accept flags */
 			if (msg->rx_mask & VFPF_RX_MASK_ACCEPT_MATCHED_UNICAST)
@@ -1617,9 +1619,11 @@ static void bnx2x_vfop_mbx_qfilters(struct bnx2x *bp, struct bnx2x_virtf *vf)
 				__set_bit(BNX2X_ACCEPT_BROADCAST, &accept);
 
 			/* A packet arriving the vf's mac should be accepted
-			 * with any vlan
+			 * with any vlan, unless a vlan has already been
+			 * configured.
 			 */
-			__set_bit(BNX2X_ACCEPT_ANY_VLAN, &accept);
+			if (!(bulletin->valid_bitmap & (1 << VLAN_VALID)))
+				__set_bit(BNX2X_ACCEPT_ANY_VLAN, &accept);
 
 			/* set rx-mode */
 			rc = bnx2x_vfop_rxmode_cmd(bp, vf, &cmd,
@@ -1710,6 +1714,21 @@ static void bnx2x_vf_mbx_set_q_filters(struct bnx2x *bp,
 			goto response;
 		}
 	}
+	/* if vlan was set by hypervisor we don't allow guest to config vlan */
+	if (bulletin->valid_bitmap & 1 << VLAN_VALID) {
+		int i;
+
+		/* search for vlan filters */
+		for (i = 0; i < filters->n_mac_vlan_filters; i++) {
+			if (filters->filters[i].flags &
+			    VFPF_Q_FILTER_VLAN_TAG_VALID) {
+				BNX2X_ERR("VF[%d] attempted to configure vlan but one was already set by Hypervisor. Aborting request\n",
+					  vf->abs_vfid);
+				vf->op_rc = -EPERM;
+				goto response;
+			}
+		}
+	}
 
 	/* verify vf_qid */
 	if (filters->vf_qid > vf_rxq_count(vf))
@@ -1805,6 +1824,9 @@ static void bnx2x_vf_mbx_update_rss(struct bnx2x *bp, struct bnx2x_virtf *vf,
 	vf_op_params->rss_result_mask = rss_tlv->rss_result_mask;
 
 	/* flags handled individually for backward/forward compatability */
+	vf_op_params->rss_flags = 0;
+	vf_op_params->ramrod_flags = 0;
+
 	if (rss_tlv->rss_flags & VFPF_RSS_MODE_DISABLED)
 		__set_bit(BNX2X_RSS_MODE_DISABLED, &vf_op_params->rss_flags);
 	if (rss_tlv->rss_flags & VFPF_RSS_MODE_REGULAR)