Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net

Conflicts:
	drivers/net/ethernet/rocker/rocker.c

The rocker commit was two overlapping changes, one to rename
the ->vport member to ->pport, and another making the bitmask
expression use '1ULL' instead of plain '1'.

Signed-off-by: David S. Miller <davem@davemloft.net>

Documentation/ABI/testing/sysfs-driver-samsung-laptop

@@ -35,3 +35,11 @@ Contact:	Corentin Chary <corentin.chary@gmail.com>
 Description:	Use your USB ports to charge devices, even
 		when your laptop is powered off.
 		1 means enabled, 0 means disabled.
+
+What:		/sys/devices/platform/samsung/lid_handling
+Date:		December 11, 2014
+KernelVersion:	3.19
+Contact:	Julijonas Kikutis <julijonas.kikutis@gmail.com>
+Description:	Some Samsung laptops handle lid closing quicker and
+		only handle lid opening with this mode enabled.
+		1 means enabled, 0 means disabled.

Documentation/ABI/testing/sysfs-driver-toshiba_acpi

@@ -0,0 +1,114 @@
+What:		/sys/devices/LNXSYSTM:00/LNXSYBUS:00/TOS{1900,620{0,7,8}}:00/kbd_backlight_mode
+Date:		June 8, 2014
+KernelVersion:	3.15
+Contact:	Azael Avalos <coproscefalo@gmail.com>
+Description:	This file controls the keyboard backlight operation mode, valid
+		values are:
+			* 0x1  -> FN-Z
+			* 0x2  -> AUTO (also called TIMER)
+			* 0x8  -> ON
+			* 0x10 -> OFF
+		Note that the kernel 3.16 onwards this file accepts all listed
+		parameters, kernel 3.15 only accepts the first two (FN-Z and
+		AUTO).
+Users:		KToshiba
+
+What:		/sys/devices/LNXSYSTM:00/LNXSYBUS:00/TOS{1900,620{0,7,8}}:00/kbd_backlight_timeout
+Date:		June 8, 2014
+KernelVersion:	3.15
+Contact:	Azael Avalos <coproscefalo@gmail.com>
+Description:	This file controls the timeout of the keyboard backlight
+		whenever the operation mode is set to AUTO (or TIMER),
+		valid values range from 0-60.
+		Note that the kernel 3.15 only had support for the first
+		keyboard type, the kernel 3.16 added support for the second
+		type and the range accepted for type 2 is 1-60.
+		See the entry named "kbd_type"
+Users:		KToshiba
+
+What:		/sys/devices/LNXSYSTM:00/LNXSYBUS:00/TOS{1900,620{0,7,8}}:00/position
+Date:		June 8, 2014
+KernelVersion:	3.15
+Contact:	Azael Avalos <coproscefalo@gmail.com>
+Description:	This file shows the absolute position of the built-in
+		accelereometer.
+
+What:		/sys/devices/LNXSYSTM:00/LNXSYBUS:00/TOS{1900,620{0,7,8}}:00/touchpad
+Date:		June 8, 2014
+KernelVersion:	3.15
+Contact:	Azael Avalos <coproscefalo@gmail.com>
+Description:	This files controls the status of the touchpad and pointing
+		stick (if available), valid values are:
+			* 0 -> OFF
+			* 1 -> ON
+Users:		KToshiba
+
+What:		/sys/devices/LNXSYSTM:00/LNXSYBUS:00/TOS{1900,620{0,7,8}}:00/available_kbd_modes
+Date:		August 3, 2014
+KernelVersion:	3.16
+Contact:	Azael Avalos <coproscefalo@gmail.com>
+Description:	This file shows the supported keyboard backlight modes
+		the system supports, which can be:
+			* 0x1  -> FN-Z
+			* 0x2  -> AUTO (also called TIMER)
+			* 0x8  -> ON
+			* 0x10 -> OFF
+		Note that not all keyboard types support the listed modes.
+		See the entry named "available_kbd_modes"
+Users:		KToshiba
+
+What:		/sys/devices/LNXSYSTM:00/LNXSYBUS:00/TOS{1900,620{0,7,8}}:00/kbd_type
+Date:		August 3, 2014
+KernelVersion:	3.16
+Contact:	Azael Avalos <coproscefalo@gmail.com>
+Description:	This file shows the current keyboard backlight type,
+		which can be:
+			* 1 -> Type 1, supporting modes FN-Z and AUTO
+			* 2 -> Type 2, supporting modes TIMER, ON and OFF
+Users:		KToshiba
+
+What:		/sys/devices/LNXSYSTM:00/LNXSYBUS:00/TOS{1900,620{0,7,8}}:00/version
+Date:		February, 2015
+KernelVersion:	3.20
+Contact:	Azael Avalos <coproscefalo@gmail.com>
+Description:	This file shows the current version of the driver
+
+What:		/sys/devices/LNXSYSTM:00/LNXSYBUS:00/TOS{1900,620{0,7,8}}:00/fan
+Date:		February, 2015
+KernelVersion:	3.20
+Contact:	Azael Avalos <coproscefalo@gmail.com>
+Description:	This file controls the state of the internal fan, valid
+		values are:
+			* 0 -> OFF
+			* 1 -> ON
+
+What:		/sys/devices/LNXSYSTM:00/LNXSYBUS:00/TOS{1900,620{0,7,8}}:00/kbd_function_keys
+Date:		February, 2015
+KernelVersion:	3.20
+Contact:	Azael Avalos <coproscefalo@gmail.com>
+Description:	This file controls the Special Functions (hotkeys) operation
+		mode, valid values are:
+			* 0 -> Normal Operation
+			* 1 -> Special Functions
+		In the "Normal Operation" mode, the F{1-12} keys are as usual
+		and the hotkeys are accessed via FN-F{1-12}.
+		In the "Special Functions" mode, the F{1-12} keys trigger the
+		hotkey and the F{1-12} keys are accessed via FN-F{1-12}.
+
+What:		/sys/devices/LNXSYSTM:00/LNXSYBUS:00/TOS{1900,620{0,7,8}}:00/panel_power_on
+Date:		February, 2015
+KernelVersion:	3.20
+Contact:	Azael Avalos <coproscefalo@gmail.com>
+Description:	This file controls whether the laptop should turn ON whenever
+		the LID is opened, valid values are:
+			* 0 -> Disabled
+			* 1 -> Enabled
+
+What:		/sys/devices/LNXSYSTM:00/LNXSYBUS:00/TOS{1900,620{0,7,8}}:00/usb_three
+Date:		February, 2015
+KernelVersion:	3.20
+Contact:	Azael Avalos <coproscefalo@gmail.com>
+Description:	This file controls whether the USB 3 functionality, valid
+		values are:
+			* 0 -> Disabled (Acts as a regular USB 2)
+			* 1 -> Enabled (Full USB 3 functionality)

Documentation/DocBook/kgdb.tmpl

@@ -197,6 +197,7 @@
    may be configured as a kernel built-in or a kernel loadable module.
    You can only make use of <constant>kgdbwait</constant> and early
    debugging if you build kgdboc into the kernel as a built-in.
+   </para>
    <para>Optionally you can elect to activate kms (Kernel Mode
    Setting) integration.  When you use kms with kgdboc and you have a
    video driver that has atomic mode setting hooks, it is possible to
@@ -206,7 +207,6 @@
    crashes or doing analysis of memory with kdb while allowing the
    full graphics console applications to run.
    </para>
-   </para>
    <sect2 id="kgdbocArgs">
    <title>kgdboc arguments</title>
    <para>Usage: <constant>kgdboc=[kms][[,]kbd][[,]serial_device][,baud]</constant></para>
@@ -284,7 +284,6 @@
    </listitem>
    </orderedlist>
    </para>
-   </sect3>
    <para>NOTE: Kgdboc does not support interrupting the target via the
    gdb remote protocol.  You must manually send a sysrq-g unless you
    have a proxy that splits console output to a terminal program.
@@ -305,6 +304,7 @@
     as well as on the initial connect, or to use a debugger proxy that
     allows an unmodified gdb to do the debugging.
    </para>
+   </sect3>
    </sect2>
    </sect1>
    <sect1 id="kgdbwait">
@@ -350,12 +350,12 @@
    </para>
    </listitem>
    </orderedlist>
+  </para>
    <para>IMPORTANT NOTE: You cannot use kgdboc + kgdbcon on a tty that is an
    active system console.  An example of incorrect usage is <constant>console=ttyS0,115200 kgdboc=ttyS0 kgdbcon</constant>
    </para>
    <para>It is possible to use this option with kgdboc on a tty that is not a system console.
    </para>
-  </para>
   </sect1>
    <sect1 id="kgdbreboot">
    <title>Run time parameter: kgdbreboot</title>

Documentation/cgroups/unified-hierarchy.txt

@@ -404,8 +404,8 @@ supported and the interface files "release_agent" and
   be understood as an underflow into the highest possible value, -2 or
   -10M etc. do not work, so it's not consistent.
 
-  memory.low, memory.high, and memory.max will use the string
-  "infinity" to indicate and set the highest possible value.
+  memory.low, memory.high, and memory.max will use the string "max" to
+  indicate and set the highest possible value.
 
 5. Planned Changes
 

Documentation/clk.txt

@@ -73,6 +73,8 @@ the operations defined in clk.h:
 						unsigned long *parent_rate);
 		long		(*determine_rate)(struct clk_hw *hw,
 						unsigned long rate,
+						unsigned long min_rate,
+						unsigned long max_rate,
 						unsigned long *best_parent_rate,
 						struct clk_hw **best_parent_clk);
 		int		(*set_parent)(struct clk_hw *hw, u8 index);

Documentation/device-mapper/dm-crypt.txt

@@ -51,7 +51,7 @@ Parameters: <cipher> <key> <iv_offset> <device path> \
     Otherwise #opt_params is the number of following arguments.
 
     Example of optional parameters section:
-        1 allow_discards
+        3 allow_discards same_cpu_crypt submit_from_crypt_cpus
 
 allow_discards
     Block discard requests (a.k.a. TRIM) are passed through the crypt device.
@@ -63,6 +63,19 @@ allow_discards
     used space etc.) if the discarded blocks can be located easily on the
     device later.
 
+same_cpu_crypt
+    Perform encryption using the same cpu that IO was submitted on.
+    The default is to use an unbound workqueue so that encryption work
+    is automatically balanced between available CPUs.
+
+submit_from_crypt_cpus
+    Disable offloading writes to a separate thread after encryption.
+    There are some situations where offloading write bios from the
+    encryption threads to a single thread degrades performance
+    significantly.  The default is to offload write bios to the same
+    thread because it benefits CFQ to have writes submitted using the
+    same context.
+
 Example scripts
 ===============
 LUKS (Linux Unified Key Setup) is now the preferred way to set up disk

Documentation/devicetree/bindings/clock/exynos7-clock.txt

@@ -34,6 +34,8 @@ Required Properties for Clock Controller:
 	- "samsung,exynos7-clock-peris"
 	- "samsung,exynos7-clock-fsys0"
 	- "samsung,exynos7-clock-fsys1"
+	- "samsung,exynos7-clock-mscl"
+	- "samsung,exynos7-clock-aud"
 
  - reg: physical base address of the controller and the length of
 	memory mapped region.
@@ -53,6 +55,7 @@ Input clocks for top0 clock controller:
 	- dout_sclk_bus1_pll
 	- dout_sclk_cc_pll
 	- dout_sclk_mfc_pll
+	- dout_sclk_aud_pll
 
 Input clocks for top1 clock controller:
 	- fin_pll
@@ -76,6 +79,14 @@ Input clocks for peric1 clock controller:
 	- sclk_uart1
 	- sclk_uart2
 	- sclk_uart3
+	- sclk_spi0
+	- sclk_spi1
+	- sclk_spi2
+	- sclk_spi3
+	- sclk_spi4
+	- sclk_i2s1
+	- sclk_pcm1
+	- sclk_spdif
 
 Input clocks for peris clock controller:
 	- fin_pll
@@ -91,3 +102,7 @@ Input clocks for fsys1 clock controller:
 	- dout_aclk_fsys1_200
 	- dout_sclk_mmc0
 	- dout_sclk_mmc1
+
+Input clocks for aud clock controller:
+	- fin_pll
+	- fout_aud_pll

Documentation/devicetree/bindings/clock/nvidia,tegra124-car.txt

@@ -1,4 +1,4 @@
-NVIDIA Tegra124 Clock And Reset Controller
+NVIDIA Tegra124 and Tegra132 Clock And Reset Controller
 
 This binding uses the common clock binding:
 Documentation/devicetree/bindings/clock/clock-bindings.txt
@@ -7,14 +7,16 @@ The CAR (Clock And Reset) Controller on Tegra is the HW module responsible
 for muxing and gating Tegra's clocks, and setting their rates.
 
 Required properties :
-- compatible : Should be "nvidia,tegra124-car"
+- compatible : Should be "nvidia,tegra124-car" or "nvidia,tegra132-car"
 - reg : Should contain CAR registers location and length
 - clocks : Should contain phandle and clock specifiers for two clocks:
   the 32 KHz "32k_in", and the board-specific oscillator "osc".
 - #clock-cells : Should be 1.
   In clock consumers, this cell represents the clock ID exposed by the
-  CAR. The assignments may be found in header file
-  <dt-bindings/clock/tegra124-car.h>.
+  CAR. The assignments may be found in the header files
+  <dt-bindings/clock/tegra124-car-common.h> (which covers IDs common
+  to Tegra124 and Tegra132) and <dt-bindings/clock/tegra124-car.h>
+  (for Tegra124-specific clocks).
 - #reset-cells : Should be 1.
   In clock consumers, this cell represents the bit number in the CAR's
   array of CLK_RST_CONTROLLER_RST_DEVICES_* registers.

Documentation/devicetree/bindings/clock/qcom,lcc.txt

@@ -0,0 +1,21 @@
+Qualcomm LPASS Clock & Reset Controller Binding
+------------------------------------------------
+
+Required properties :
+- compatible : shall contain only one of the following:
+
+			"qcom,lcc-msm8960"
+			"qcom,lcc-apq8064"
+			"qcom,lcc-ipq8064"
+
+- reg : shall contain base register location and length
+- #clock-cells : shall contain 1
+- #reset-cells : shall contain 1
+
+Example:
+	clock-controller@28000000 {
+		compatible = "qcom,lcc-ipq8064";
+		reg = <0x28000000 0x1000>;
+		#clock-cells = <1>;
+		#reset-cells = <1>;
+	};

Documentation/devicetree/bindings/clock/qoriq-clock.txt

@@ -1,6 +1,6 @@
-* Clock Block on Freescale CoreNet Platforms
+* Clock Block on Freescale QorIQ Platforms
 
-Freescale CoreNet chips take primary clocking input from the external
+Freescale qoriq chips take primary clocking input from the external
 SYSCLK signal. The SYSCLK input (frequency) is multiplied using
 multiple phase locked loops (PLL) to create a variety of frequencies
 which can then be passed to a variety of internal logic, including
@@ -29,6 +29,7 @@ Required properties:
 	* "fsl,t4240-clockgen"
 	* "fsl,b4420-clockgen"
 	* "fsl,b4860-clockgen"
+	* "fsl,ls1021a-clockgen"
 	Chassis clock strings include:
 	* "fsl,qoriq-clockgen-1.0": for chassis 1.0 clocks
 	* "fsl,qoriq-clockgen-2.0": for chassis 2.0 clocks

Documentation/devicetree/bindings/clock/renesas,cpg-mstp-clocks.txt

@@ -11,6 +11,7 @@ Required Properties:
 
   - compatible: Must be one of the following
     - "renesas,r7s72100-mstp-clocks" for R7S72100 (RZ) MSTP gate clocks
+    - "renesas,r8a73a4-mstp-clocks" for R8A73A4 (R-Mobile APE6) MSTP gate clocks
     - "renesas,r8a7740-mstp-clocks" for R8A7740 (R-Mobile A1) MSTP gate clocks
     - "renesas,r8a7779-mstp-clocks" for R8A7779 (R-Car H1) MSTP gate clocks
     - "renesas,r8a7790-mstp-clocks" for R8A7790 (R-Car H2) MSTP gate clocks

Documentation/devicetree/bindings/clock/renesas,r8a73a4-cpg-clocks.txt

@@ -0,0 +1,33 @@
+* Renesas R8A73A4 Clock Pulse Generator (CPG)
+
+The CPG generates core clocks for the R8A73A4 SoC. It includes five PLLs
+and several fixed ratio dividers.
+
+Required Properties:
+
+  - compatible: Must be "renesas,r8a73a4-cpg-clocks"
+
+  - reg: Base address and length of the memory resource used by the CPG
+
+  - clocks: Reference to the parent clocks ("extal1" and "extal2")
+
+  - #clock-cells: Must be 1
+
+  - clock-output-names: The names of the clocks. Supported clocks are "main",
+    "pll0", "pll1", "pll2", "pll2s", "pll2h", "z", "z2", "i", "m3", "b",
+    "m1", "m2", "zx", "zs", and "hp".
+
+
+Example
+-------
+
+        cpg_clocks: cpg_clocks@e6150000 {
+                compatible = "renesas,r8a73a4-cpg-clocks";
+                reg = <0 0xe6150000 0 0x10000>;
+                clocks = <&extal1_clk>, <&extal2_clk>;
+                #clock-cells = <1>;
+                clock-output-names = "main", "pll0", "pll1", "pll2",
+                                     "pll2s", "pll2h", "z", "z2",
+                                     "i", "m3", "b", "m1", "m2",
+                                     "zx", "zs", "hp";
+        };

Documentation/devicetree/bindings/clock/renesas,rcar-gen2-cpg-clocks.txt

@@ -8,15 +8,18 @@ Required Properties:
   - compatible: Must be one of
     - "renesas,r8a7790-cpg-clocks" for the r8a7790 CPG
     - "renesas,r8a7791-cpg-clocks" for the r8a7791 CPG
+    - "renesas,r8a7793-cpg-clocks" for the r8a7793 CPG
     - "renesas,r8a7794-cpg-clocks" for the r8a7794 CPG
     - "renesas,rcar-gen2-cpg-clocks" for the generic R-Car Gen2 CPG
 
   - reg: Base address and length of the memory resource used by the CPG
 
-  - clocks: Reference to the parent clock
+  - clocks: References to the parent clocks: first to the EXTAL clock, second
+    to the USB_EXTAL clock
   - #clock-cells: Must be 1
   - clock-output-names: The names of the clocks. Supported clocks are "main",
-    "pll0", "pll1", "pll3", "lb", "qspi", "sdh", "sd0", "sd1" and "z"
+    "pll0", "pll1", "pll3", "lb", "qspi", "sdh", "sd0", "sd1", "z", "rcan", and
+    "adsp"
 
 
 Example
@@ -26,8 +29,9 @@ Example
 		compatible = "renesas,r8a7790-cpg-clocks",
 			     "renesas,rcar-gen2-cpg-clocks";
 		reg = <0 0xe6150000 0 0x1000>;
-		clocks = <&extal_clk>;
+		clocks = <&extal_clk &usb_extal_clk>;
 		#clock-cells = <1>;
 		clock-output-names = "main", "pll0, "pll1", "pll3",
-				     "lb", "qspi", "sdh", "sd0", "sd1", "z";
+				     "lb", "qspi", "sdh", "sd0", "sd1", "z",
+				     "rcan", "adsp";
 	};

Documentation/devicetree/bindings/clock/sunxi.txt

@@ -26,7 +26,7 @@ Required properties:
 	"allwinner,sun5i-a10s-ahb-gates-clk" - for the AHB gates on A10s
 	"allwinner,sun7i-a20-ahb-gates-clk" - for the AHB gates on A20
 	"allwinner,sun6i-a31-ar100-clk" - for the AR100 on A31
-	"allwinner,sun6i-a31-ahb1-mux-clk" - for the AHB1 multiplexer on A31
+	"allwinner,sun6i-a31-ahb1-clk" - for the AHB1 clock on A31
 	"allwinner,sun6i-a31-ahb1-gates-clk" - for the AHB1 gates on A31
 	"allwinner,sun8i-a23-ahb1-gates-clk" - for the AHB1 gates on A23
 	"allwinner,sun9i-a80-ahb0-gates-clk" - for the AHB0 gates on A80
@@ -55,9 +55,11 @@ Required properties:
 	"allwinner,sun6i-a31-apb2-gates-clk" - for the APB2 gates on A31
 	"allwinner,sun8i-a23-apb2-gates-clk" - for the APB2 gates on A23
 	"allwinner,sun5i-a13-mbus-clk" - for the MBUS clock on A13
-	"allwinner,sun4i-a10-mmc-output-clk" - for the MMC output clock on A10
-	"allwinner,sun4i-a10-mmc-sample-clk" - for the MMC sample clock on A10
+	"allwinner,sun4i-a10-mmc-clk" - for the MMC clock
+	"allwinner,sun9i-a80-mmc-clk" - for mmc module clocks on A80
+	"allwinner,sun9i-a80-mmc-config-clk" - for mmc gates + resets on A80
 	"allwinner,sun4i-a10-mod0-clk" - for the module 0 family of clocks
+	"allwinner,sun9i-a80-mod0-clk" - for module 0 (storage) clocks on A80
 	"allwinner,sun8i-a23-mbus-clk" - for the MBUS clock on A23
 	"allwinner,sun7i-a20-out-clk" - for the external output clocks
 	"allwinner,sun7i-a20-gmac-clk" - for the GMAC clock module on A20/A31
@@ -73,7 +75,9 @@ Required properties for all clocks:
 - #clock-cells : from common clock binding; shall be set to 0 except for
 	the following compatibles where it shall be set to 1:
 	"allwinner,*-gates-clk", "allwinner,sun4i-pll5-clk",
-	"allwinner,sun4i-pll6-clk", "allwinner,sun6i-a31-pll6-clk"
+	"allwinner,sun4i-pll6-clk", "allwinner,sun6i-a31-pll6-clk",
+	"allwinner,*-usb-clk", "allwinner,*-mmc-clk",
+	"allwinner,*-mmc-config-clk"
 - clock-output-names : shall be the corresponding names of the outputs.
 	If the clock module only has one output, the name shall be the
 	module name.
@@ -81,6 +85,10 @@ Required properties for all clocks:
 And "allwinner,*-usb-clk" clocks also require:
 - reset-cells : shall be set to 1
 
+The "allwinner,sun9i-a80-mmc-config-clk" clock also requires:
+- #reset-cells : shall be set to 1
+- resets : shall be the reset control phandle for the mmc block.
+
 For "allwinner,sun7i-a20-gmac-clk", the parent clocks shall be fixed rate
 dummy clocks at 25 MHz and 125 MHz, respectively. See example.
 
@@ -95,6 +103,14 @@ For "allwinner,sun6i-a31-pll6-clk", there are 2 outputs. The first output
 is the normal PLL6 output, or "pll6". The second output is rate doubled
 PLL6, or "pll6x2".
 
+The "allwinner,*-mmc-clk" clocks have three different outputs: the
+main clock, with the ID 0, and the output and sample clocks, with the
+IDs 1 and 2, respectively.
+
+The "allwinner,sun9i-a80-mmc-config-clk" clock has one clock/reset output
+per mmc controller. The number of outputs is determined by the size of
+the address block, which is related to the overall mmc block.
+
 For example:
 
 osc24M: clk@01c20050 {
@@ -138,11 +154,11 @@ cpu: cpu@01c20054 {
 };
 
 mmc0_clk: clk@01c20088 {
-	#clock-cells = <0>;
-	compatible = "allwinner,sun4i-mod0-clk";
+	#clock-cells = <1>;
+	compatible = "allwinner,sun4i-a10-mmc-clk";
 	reg = <0x01c20088 0x4>;
 	clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
-	clock-output-names = "mmc0";
+	clock-output-names = "mmc0", "mmc0_output", "mmc0_sample";
 };
 
 mii_phy_tx_clk: clk@2 {
@@ -170,3 +186,16 @@ gmac_clk: clk@01c20164 {
 	clocks = <&mii_phy_tx_clk>, <&gmac_int_tx_clk>;
 	clock-output-names = "gmac";
 };
+
+mmc_config_clk: clk@01c13000 {
+	compatible = "allwinner,sun9i-a80-mmc-config-clk";
+	reg = <0x01c13000 0x10>;
+	clocks = <&ahb0_gates 8>;
+	clock-names = "ahb";
+	resets = <&ahb0_resets 8>;
+	reset-names = "ahb";
+	#clock-cells = <1>;
+	#reset-cells = <1>;
+	clock-output-names = "mmc0_config", "mmc1_config",
+			     "mmc2_config", "mmc3_config";
+};

Documentation/devicetree/bindings/clock/ti,cdce706.txt

@@ -0,0 +1,42 @@
+Bindings for Texas Instruments CDCE706 programmable 3-PLL clock
+synthesizer/multiplier/divider.
+
+Reference: http://www.ti.com/lit/ds/symlink/cdce706.pdf
+
+I2C device node required properties:
+- compatible: shall be "ti,cdce706".
+- reg: i2c device address, shall be in range [0x68...0x6b].
+- #clock-cells: from common clock binding; shall be set to 1.
+- clocks: from common clock binding; list of parent clock
+  handles, shall be reference clock(s) connected to CLK_IN0
+  and CLK_IN1 pins.
+- clock-names: shall be clk_in0 and/or clk_in1. Use clk_in0
+  in case of crystal oscillator or differential signal input
+  configuration. Use clk_in0 and clk_in1 in case of independent
+  single-ended LVCMOS inputs configuration.
+
+Example:
+
+	clocks {
+		clk54: clk54 {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <54000000>;
+		};
+	};
+	...
+	i2c0: i2c-master@0d090000 {
+		...
+		cdce706: clock-synth@69 {
+			compatible = "ti,cdce706";
+			#clock-cells = <1>;
+			reg = <0x69>;
+			clocks = <&clk54>;
+			clock-names = "clk_in0";
+		};
+	};
+	...
+	simple-audio-card,codec {
+		...
+		clocks = <&cdce706 4>;
+	};

Documentation/devicetree/bindings/clock/ti/fapll.txt

@@ -0,0 +1,33 @@
+Binding for Texas Instruments FAPLL clock.
+
+Binding status: Unstable - ABI compatibility may be broken in the future
+
+This binding uses the common clock binding[1]. It assumes a
+register-mapped FAPLL with usually two selectable input clocks
+(reference clock and bypass clock), and one or more child
+syntesizers.
+
+[1] Documentation/devicetree/bindings/clock/clock-bindings.txt
+
+Required properties:
+- compatible : shall be "ti,dm816-fapll-clock"
+- #clock-cells : from common clock binding; shall be set to 0.
+- clocks : link phandles of parent clocks (clk-ref and clk-bypass)
+- reg : address and length of the register set for controlling the FAPLL.
+
+Examples:
+	main_fapll: main_fapll {
+		#clock-cells = <1>;
+		compatible = "ti,dm816-fapll-clock";
+		reg = <0x400 0x40>;
+		clocks = <&sys_clkin_ck &sys_clkin_ck>;
+		clock-indices = <1>, <2>, <3>, <4>, <5>,
+				<6>, <7>;
+		clock-output-names = "main_pll_clk1",
+				     "main_pll_clk2",
+				     "main_pll_clk3",
+				     "main_pll_clk4",
+				     "main_pll_clk5",
+				     "main_pll_clk6",
+				     "main_pll_clk7";
+	};

Documentation/devicetree/bindings/dma/img-mdc-dma.txt

@@ -0,0 +1,57 @@
+* IMG Multi-threaded DMA Controller (MDC)
+
+Required properties:
+- compatible: Must be "img,pistachio-mdc-dma".
+- reg: Must contain the base address and length of the MDC registers.
+- interrupts: Must contain all the per-channel DMA interrupts.
+- clocks: Must contain an entry for each entry in clock-names.
+  See ../clock/clock-bindings.txt for details.
+- clock-names: Must include the following entries:
+  - sys: MDC system interface clock.
+- img,cr-periph: Must contain a phandle to the peripheral control syscon
+  node which contains the DMA request to channel mapping registers.
+- img,max-burst-multiplier: Must be the maximum supported burst size multiplier.
+  The maximum burst size is this value multiplied by the hardware-reported bus
+  width.
+- #dma-cells: Must be 3:
+  - The first cell is the peripheral's DMA request line.
+  - The second cell is a bitmap specifying to which channels the DMA request
+    line may be mapped (i.e. bit N set indicates channel N is usable).
+  - The third cell is the thread ID to be used by the channel.
+
+Optional properties:
+- dma-channels: Number of supported DMA channels, up to 32.  If not specified
+  the number reported by the hardware is used.
+
+Example:
+
+mdc: dma-controller@18143000 {
+	compatible = "img,pistachio-mdc-dma";
+	reg = <0x18143000 0x1000>;
+	interrupts = <GIC_SHARED 27 IRQ_TYPE_LEVEL_HIGH>,
+		     <GIC_SHARED 28 IRQ_TYPE_LEVEL_HIGH>,
+		     <GIC_SHARED 29 IRQ_TYPE_LEVEL_HIGH>,
+		     <GIC_SHARED 30 IRQ_TYPE_LEVEL_HIGH>,
+		     <GIC_SHARED 31 IRQ_TYPE_LEVEL_HIGH>,
+		     <GIC_SHARED 32 IRQ_TYPE_LEVEL_HIGH>,
+		     <GIC_SHARED 33 IRQ_TYPE_LEVEL_HIGH>,
+		     <GIC_SHARED 34 IRQ_TYPE_LEVEL_HIGH>,
+		     <GIC_SHARED 35 IRQ_TYPE_LEVEL_HIGH>,
+		     <GIC_SHARED 36 IRQ_TYPE_LEVEL_HIGH>,
+		     <GIC_SHARED 37 IRQ_TYPE_LEVEL_HIGH>,
+		     <GIC_SHARED 38 IRQ_TYPE_LEVEL_HIGH>;
+	clocks = <&system_clk>;
+	clock-names = "sys";
+
+	img,max-burst-multiplier = <16>;
+	img,cr-periph = <&cr_periph>;
+
+	#dma-cells = <3>;
+};
+
+spi@18100f00 {
+	...
+	dmas = <&mdc 9 0xffffffff 0>, <&mdc 10 0xffffffff 0>;
+	dma-names = "tx", "rx";
+	...
+};

Documentation/devicetree/bindings/dma/renesas,rcar-dmac.txt

@@ -5,9 +5,6 @@ controller instances named DMAC capable of serving multiple clients. Channels
 can be dedicated to specific clients or shared between a large number of
 clients.
 
-DMA clients are connected to the DMAC ports referenced by an 8-bit identifier
-called MID/RID.
-
 Each DMA client is connected to one dedicated port of the DMAC, identified by
 an 8-bit port number called the MID/RID. A DMA controller can thus serve up to
 256 clients in total. When the number of hardware channels is lower than the

Documentation/devicetree/bindings/dma/snps-dma.txt

@@ -38,7 +38,7 @@ Example:
 		chan_allocation_order = <1>;
 		chan_priority = <1>;
 		block_size = <0xfff>;
-		data_width = <3 3 0 0>;
+		data_width = <3 3>;
 	};
 
 DMA clients connected to the Designware DMA controller must use the format

Documentation/devicetree/bindings/i2c/brcm,iproc-i2c.txt

@@ -0,0 +1,37 @@
+Broadcom iProc I2C controller
+
+Required properties:
+
+- compatible:
+    Must be "brcm,iproc-i2c"
+
+- reg:
+    Define the base and range of the I/O address space that contain the iProc
+    I2C controller registers
+
+- interrupts:
+    Should contain the I2C interrupt
+
+- clock-frequency:
+    This is the I2C bus clock. Need to be either 100000 or 400000
+
+- #address-cells:
+    Always 1 (for I2C addresses)
+
+- #size-cells:
+    Always 0
+
+Example:
+	i2c0: i2c@18008000 {
+		compatible = "brcm,iproc-i2c";
+		reg = <0x18008000 0x100>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		interrupts = <GIC_SPI 85 IRQ_TYPE_NONE>;
+		clock-frequency = <100000>;
+
+		codec: wm8750@1a {
+			compatible = "wlf,wm8750";
+			reg = <0x1a>;
+		};
+	};

Documentation/devicetree/bindings/i2c/i2c-mux-pca954x.txt

@@ -16,6 +16,9 @@ Required Properties:
 Optional Properties:
 
   - reset-gpios: Reference to the GPIO connected to the reset input.
+  - i2c-mux-idle-disconnect: Boolean; if defined, forces mux to disconnect all
+    children in idle state. This is necessary for example, if there are several
+    multiplexers on the bus and the devices behind them use same I2C addresses.
 
 
 Example:

Documentation/devicetree/bindings/i2c/i2c-ocores.txt

@@ -4,24 +4,60 @@ Required properties:
 - compatible      : "opencores,i2c-ocores" or "aeroflexgaisler,i2cmst"
 - reg             : bus address start and address range size of device
 - interrupts      : interrupt number
-- clock-frequency : frequency of bus clock in Hz
+- clocks          : handle to the controller clock; see the note below.
+                    Mutually exclusive with opencores,ip-clock-frequency
+- opencores,ip-clock-frequency: frequency of the controller clock in Hz;
+                    see the note below. Mutually exclusive with clocks
 - #address-cells  : should be <1>
 - #size-cells     : should be <0>
 
 Optional properties:
+- clock-frequency : frequency of bus clock in Hz; see the note below.
+                    Defaults to 100 KHz when the property is not specified
 - reg-shift       : device register offsets are shifted by this value
 - reg-io-width    : io register width in bytes (1, 2 or 4)
 - regstep         : deprecated, use reg-shift above
 
-Example:
+Note
+clock-frequency property is meant to control the bus frequency for i2c bus
+drivers, but it was incorrectly used to specify i2c controller input clock
+frequency. So the following rules are set to fix this situation:
+- if clock-frequency is present and neither opencores,ip-clock-frequency nor
+  clocks are, then clock-frequency specifies i2c controller clock frequency.
+  This is to keep backwards compatibility with setups using old DTB. i2c bus
+  frequency is fixed at 100 KHz.
+- if clocks is present it specifies i2c controller clock. clock-frequency
+  property specifies i2c bus frequency.
+- if opencores,ip-clock-frequency is present it specifies i2c controller
+  clock frequency. clock-frequency property specifies i2c bus frequency.
 
+Examples:
+
+	i2c0: ocores@a0000000 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "opencores,i2c-ocores";
+		reg = <0xa0000000 0x8>;
+		interrupts = <10>;
+		opencores,ip-clock-frequency = <20000000>;
+
+		reg-shift = <0>;	/* 8 bit registers */
+		reg-io-width = <1>;	/* 8 bit read/write */
+
+		dummy@60 {
+			compatible = "dummy";
+			reg = <0x60>;
+		};
+	};
+or
 	i2c0: ocores@a0000000 {
 		#address-cells = <1>;
 		#size-cells = <0>;
 		compatible = "opencores,i2c-ocores";
 		reg = <0xa0000000 0x8>;
 		interrupts = <10>;
-		clock-frequency = <20000000>;
+		clocks = <&osc>;
+		clock-frequency = <400000>; /* i2c bus frequency 400 KHz */
 
 		reg-shift = <0>;	/* 8 bit registers */
 		reg-io-width = <1>;	/* 8 bit read/write */

Documentation/devicetree/bindings/i2c/i2c-rk3x.txt

@@ -21,6 +21,17 @@ Required on RK3066, RK3188 :
 Optional properties :
 
  - clock-frequency : SCL frequency to use (in Hz). If omitted, 100kHz is used.
+ - i2c-scl-rising-time-ns : Number of nanoseconds the SCL signal takes to rise
+	(t(r) in I2C specification). If not specified this is assumed to be
+	the maximum the specification allows(1000 ns for Standard-mode,
+	300 ns for Fast-mode) which might cause slightly slower communication.
+ - i2c-scl-falling-time-ns : Number of nanoseconds the SCL signal takes to fall
+	(t(f) in the I2C specification). If not specified this is assumed to
+	be the maximum the specification allows (300 ns) which might cause
+	slightly slower communication.
+ - i2c-sda-falling-time-ns : Number of nanoseconds the SDA signal takes to fall
+	(t(f) in the I2C specification). If not specified we'll use the SCL
+	value since they are the same in nearly all cases.
 
 Example:
 
@@ -39,4 +50,7 @@ i2c0: i2c@2002d000 {
 
 	clock-names = "i2c";
 	clocks = <&cru PCLK_I2C0>;
+
+	i2c-scl-rising-time-ns = <800>;
+	i2c-scl-falling-time-ns = <100>;
 };

Documentation/devicetree/bindings/i2c/trivial-devices.txt

@@ -61,9 +61,8 @@ fsl,sgtl5000		SGTL5000: Ultra Low-Power Audio Codec
 gmt,g751		G751: Digital Temperature Sensor and Thermal Watchdog with Two-Wire Interface
 infineon,slb9635tt	Infineon SLB9635 (Soft-) I2C TPM (old protocol, max 100khz)
 infineon,slb9645tt	Infineon SLB9645 I2C TPM (new protocol, max 400khz)
-isl,isl12057		Intersil ISL12057 I2C RTC Chip
-isil,isl29028           (deprecated, use isl)
-isl,isl29028            Intersil ISL29028 Ambient Light and Proximity Sensor
+isil,isl12057		Intersil ISL12057 I2C RTC Chip
+isil,isl29028		Intersil ISL29028 Ambient Light and Proximity Sensor
 maxim,ds1050		5 Bit Programmable, Pulse-Width Modulator
 maxim,max1237		Low-Power, 4-/12-Channel, 2-Wire Serial, 12-Bit ADCs
 maxim,max6625		9-Bit/12-Bit Temperature Sensors with I²C-Compatible Serial Interface

Documentation/devicetree/bindings/mfd/da9063.txt

@@ -0,0 +1,93 @@
+* Dialog DA9063 Power Management Integrated Circuit (PMIC)
+
+DA9093 consists of a large and varied group of sub-devices (I2C Only):
+
+Device                   Supply Names    Description
+------                   ------------    -----------
+da9063-regulator        :               : LDOs & BUCKs
+da9063-rtc              :               : Real-Time Clock
+da9063-watchdog         :               : Watchdog
+
+======
+
+Required properties:
+
+- compatible : Should be "dlg,da9063"
+- reg : Specifies the I2C slave address (this defaults to 0x58 but it can be
+  modified to match the chip's OTP settings).
+- interrupt-parent : Specifies the reference to the interrupt controller for
+  the DA9063.
+- interrupts : IRQ line information.
+- interrupt-controller
+
+Sub-nodes:
+
+- regulators : This node defines the settings for the LDOs and BUCKs. The
+  DA9063 regulators are bound using their names listed below:
+
+    bcore1    : BUCK CORE1
+    bcore2    : BUCK CORE2
+    bpro      : BUCK PRO
+    bmem      : BUCK MEM
+    bio       : BUCK IO
+    bperi     : BUCK PERI
+    ldo1      : LDO_1
+    ldo2      : LDO_2
+    ldo3      : LDO_3
+    ldo4      : LDO_4
+    ldo5      : LDO_5
+    ldo6      : LDO_6
+    ldo7      : LDO_7
+    ldo8      : LDO_8
+    ldo9      : LDO_9
+    ldo10     : LDO_10
+    ldo11     : LDO_11
+
+  The component follows the standard regulator framework and the bindings
+  details of individual regulator device can be found in:
+  Documentation/devicetree/bindings/regulator/regulator.txt
+
+- rtc : This node defines settings for the Real-Time Clock associated with
+  the DA9063. There are currently no entries in this binding, however
+  compatible = "dlg,da9063-rtc" should be added if a node is created.
+
+- watchdog : This node defines settings for the Watchdog timer associated
+  with the DA9063. There are currently no entries in this binding, however
+  compatible = "dlg,da9063-watchdog" should be added if a node is created.
+
+
+Example:
+
+	pmic0: da9063@58 {
+		compatible = "dlg,da9063"
+		reg = <0x58>;
+		interrupt-parent = <&gpio6>;
+		interrupts = <11 IRQ_TYPE_LEVEL_LOW>;
+		interrupt-controller;
+
+		rtc {
+			compatible = "dlg,da9063-rtc";
+		};
+
+		wdt {
+			compatible = "dlg,da9063-watchdog";
+		};
+
+		regulators {
+			DA9063_BCORE1: bcore1 {
+				regulator-name = "BCORE1";
+				regulator-min-microvolt = <300000>;
+				regulator-max-microvolt = <1570000>;
+				regulator-min-microamp = <500000>;
+				regulator-max-microamp = <2000000>;
+				regulator-boot-on;
+			};
+			DA9063_LDO11: ldo11 {
+				regulator-name = "LDO_11";
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt = <3600000>;
+				regulator-boot-on;
+			};
+		};
+	};
+

Documentation/devicetree/bindings/mfd/qcom-rpm.txt

@@ -0,0 +1,70 @@
+Qualcomm Resource Power Manager (RPM)
+
+This driver is used to interface with the Resource Power Manager (RPM) found in
+various Qualcomm platforms. The RPM allows each component in the system to vote
+for state of the system resources, such as clocks, regulators and bus
+frequencies.
+
+- compatible:
+	Usage: required
+	Value type: <string>
+	Definition: must be one of:
+		    "qcom,rpm-apq8064"
+		    "qcom,rpm-msm8660"
+		    "qcom,rpm-msm8960"
+
+- reg:
+	Usage: required
+	Value type: <prop-encoded-array>
+	Definition: base address and size of the RPM's message ram
+
+- interrupts:
+	Usage: required
+	Value type: <prop-encoded-array>
+	Definition: three entries specifying the RPM's:
+		    1. acknowledgement interrupt
+		    2. error interrupt
+		    3. wakeup interrupt
+
+- interrupt-names:
+	Usage: required
+	Value type: <string-array>
+	Definition: must be the three strings "ack", "err" and "wakeup", in order
+
+- #address-cells:
+	Usage: required
+	Value type: <u32>
+	Definition: must be 1
+
+- #size-cells:
+	Usage: required
+	Value type: <u32>
+	Definition: must be 0
+
+- qcom,ipc:
+	Usage: required
+	Value type: <prop-encoded-array>
+
+	Definition: three entries specifying the outgoing ipc bit used for
+		    signaling the RPM:
+		    - phandle to a syscon node representing the apcs registers
+		    - u32 representing offset to the register within the syscon
+		    - u32 representing the ipc bit within the register
+
+
+= EXAMPLE
+
+	#include <dt-bindings/mfd/qcom-rpm.h>
+
+	rpm@108000 {
+		compatible = "qcom,rpm-msm8960";
+		reg = <0x108000 0x1000>;
+		qcom,ipc = <&apcs 0x8 2>;
+
+		interrupts = <0 19 0>, <0 21 0>, <0 22 0>;
+		interrupt-names = "ack", "err", "wakeup";
+
+		#address-cells = <1>;
+		#size-cells = <0>;
+	};
+

Documentation/devicetree/bindings/mips/cavium/cib.txt

@@ -0,0 +1,43 @@
+* Cavium Interrupt Bus widget
+
+Properties:
+- compatible: "cavium,octeon-7130-cib"
+
+  Compatibility with cn70XX SoCs.
+
+- interrupt-controller:  This is an interrupt controller.
+
+- reg: Two elements consisting of the addresses of the RAW and EN
+  registers of the CIB block
+
+- cavium,max-bits: The index (zero based) of the highest numbered bit
+  in the CIB block.
+
+- interrupt-parent:  Always the CIU on the SoC.
+
+- interrupts: The CIU line to which the CIB block is connected.
+
+- #interrupt-cells: Must be <2>.  The first cell is the bit within the
+   CIB.  The second cell specifies the triggering semantics of the
+   line.
+
+Example:
+
+	interrupt-controller@107000000e000 {
+		compatible = "cavium,octeon-7130-cib";
+		reg = <0x10700 0x0000e000 0x0 0x8>, /* RAW */
+		      <0x10700 0x0000e100 0x0 0x8>; /* EN */
+		cavium,max-bits = <23>;
+
+		interrupt-controller;
+		interrupt-parent = <&ciu>;
+		interrupts = <1 24>;
+		/* Interrupts are specified by two parts:
+		 * 1) Bit number in the CIB* registers
+		 * 2) Triggering (1 - edge rising
+		 *		  2 - edge falling
+		 *		  4 - level active high
+		 *		  8 - level active low)
+		 */
+		#interrupt-cells = <2>;
+	};

Documentation/devicetree/bindings/mmc/sunxi-mmc.txt

@@ -10,8 +10,8 @@ Absolute maximum transfer rate is 200MB/s
 Required properties:
  - compatible : "allwinner,sun4i-a10-mmc" or "allwinner,sun5i-a13-mmc"
  - reg : mmc controller base registers
- - clocks : a list with 2 phandle + clock specifier pairs
- - clock-names : must contain "ahb" and "mmc"
+ - clocks : a list with 4 phandle + clock specifier pairs
+ - clock-names : must contain "ahb", "mmc", "output" and "sample"
  - interrupts : mmc controller interrupt
 
 Optional properties:
@@ -25,8 +25,8 @@ Examples:
 	mmc0: mmc@01c0f000 {
 		compatible = "allwinner,sun5i-a13-mmc";
 		reg = <0x01c0f000 0x1000>;
-		clocks = <&ahb_gates 8>, <&mmc0_clk>;
-		clock-names = "ahb", "mod";
+		clocks = <&ahb_gates 8>, <&mmc0_clk>, <&mmc0_output_clk>, <&mmc0_sample_clk>;
+		clock-names = "ahb", "mod", "output", "sample";
 		interrupts = <0 32 4>;
 		status = "disabled";
 	};

Documentation/devicetree/bindings/mtd/atmel-nand.txt

@@ -1,7 +1,7 @@
 Atmel NAND flash
 
 Required properties:
-- compatible : "atmel,at91rm9200-nand".
+- compatible : should be "atmel,at91rm9200-nand" or "atmel,sama5d4-nand".
 - reg : should specify localbus address and size used for the chip,
 	and hardware ECC controller if available.
 	If the hardware ECC is PMECC, it should contain address and size for

Documentation/devicetree/bindings/mtd/fsl-quadspi.txt

@@ -1,7 +1,7 @@
 * Freescale Quad Serial Peripheral Interface(QuadSPI)
 
 Required properties:
-  - compatible : Should be "fsl,vf610-qspi"
+  - compatible : Should be "fsl,vf610-qspi" or "fsl,imx6sx-qspi"
   - reg : the first contains the register location and length,
           the second contains the memory mapping address and length
   - reg-names: Should contain the reg names "QuadSPI" and "QuadSPI-memory"

Documentation/devicetree/bindings/mtd/gpmi-nand.txt

@@ -1,7 +1,7 @@
 * Freescale General-Purpose Media Interface (GPMI)
 
 The GPMI nand controller provides an interface to control the
-NAND flash chips. We support only one NAND chip now.
+NAND flash chips.
 
 Required properties:
   - compatible : should be "fsl,<chip>-gpmi-nand"

Documentation/devicetree/bindings/mtd/hisi504-nand.txt

@@ -0,0 +1,47 @@
+Hisilicon Hip04 Soc NAND controller DT binding
+
+Required properties:
+
+- compatible:          Should be "hisilicon,504-nfc".
+- reg:                 The first contains base physical address and size of
+                       NAND controller's registers. The second contains base
+                       physical address and size of NAND controller's buffer.
+- interrupts:          Interrupt number for nfc.
+- nand-bus-width:      See nand.txt.
+- nand-ecc-mode:       Support none and hw ecc mode.
+- #address-cells:      Partition address, should be set 1.
+- #size-cells:         Partition size, should be set 1.
+
+Optional properties:
+
+- nand-ecc-strength:   Number of bits to correct per ECC step.
+- nand-ecc-step-size:  Number of data bytes covered by a single ECC step.
+
+The following ECC strength and step size are currently supported:
+
+ - nand-ecc-strength = <16>, nand-ecc-step-size = <1024>
+
+Flash chip may optionally contain additional sub-nodes describing partitions of
+the address space. See partition.txt for more detail.
+
+Example:
+
+	nand: nand@4020000 {
+		compatible = "hisilicon,504-nfc";
+		reg = <0x4020000 0x10000>, <0x5000000 0x1000>;
+		interrupts = <0 379 4>;
+		nand-bus-width = <8>;
+		nand-ecc-mode = "hw";
+		nand-ecc-strength = <16>;
+		nand-ecc-step-size = <1024>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		partition@0 {
+			label = "nand_text";
+			reg = <0x00000000 0x00400000>;
+		};
+
+		...
+
+	};

Documentation/devicetree/bindings/mtd/mtd-physmap.txt

@@ -36,6 +36,11 @@ are defined:
  - vendor-id : Contains the flash chip's vendor id (1 byte).
  - device-id : Contains the flash chip's device id (1 byte).
 
+For ROM compatible devices (and ROM fallback from cfi-flash), the following
+additional (optional) property is defined:
+
+ - erase-size : The chip's physical erase block size in bytes.
+
 The device tree may optionally contain sub-nodes describing partitions of the
 address space. See partition.txt for more detail.
 

Documentation/devicetree/bindings/net/amd-xgbe-phy.txt

@@ -27,6 +27,8 @@ property is used.
 - amd,serdes-cdr-rate: CDR rate speed selection
 - amd,serdes-pq-skew: PQ (data sampling) skew
 - amd,serdes-tx-amp: TX amplitude boost
+- amd,serdes-dfe-tap-config: DFE taps available to run
+- amd,serdes-dfe-tap-enable: DFE taps to enable
 
 Example:
 	xgbe_phy@e1240800 {
@@ -41,4 +43,6 @@ Example:
 		amd,serdes-cdr-rate = <2>, <2>, <7>;
 		amd,serdes-pq-skew = <10>, <10>, <30>;
 		amd,serdes-tx-amp = <15>, <15>, <10>;
+		amd,serdes-dfe-tap-config = <3>, <3>, <1>;
+		amd,serdes-dfe-tap-enable = <0>, <0>, <127>;
 	};

Documentation/devicetree/bindings/pwm/img-pwm.txt

@@ -0,0 +1,24 @@
+*Imagination Technologies PWM DAC driver
+
+Required properties:
+  - compatible: Should be "img,pistachio-pwm"
+  - reg: Should contain physical base address and length of pwm registers.
+  - clocks: Must contain an entry for each entry in clock-names.
+	See ../clock/clock-bindings.txt for details.
+  - clock-names: Must include the following entries.
+    - pwm: PWM operating clock.
+    - sys: PWM system interface clock.
+  - #pwm-cells: Should be 2. See pwm.txt in this directory for the
+	description of the cells format.
+  - img,cr-periph: Must contain a phandle to the peripheral control
+	syscon node which contains PWM control registers.
+
+Example:
+	pwm: pwm@18101300 {
+		compatible = "img,pistachio-pwm";
+		reg = <0x18101300 0x100>;
+		clocks = <&pwm_clk>, <&system_clk>;
+		clock-names = "pwm", "sys";
+		#pwm-cells = <2>;
+		img,cr-periph = <&cr_periph>;
+	};

Documentation/devicetree/bindings/pwm/pwm-sun4i.txt

@@ -0,0 +1,20 @@
+Allwinner sun4i and sun7i SoC PWM controller
+
+Required properties:
+  - compatible: should be one of:
+    - "allwinner,sun4i-a10-pwm"
+    - "allwinner,sun7i-a20-pwm"
+  - reg: physical base address and length of the controller's registers
+  - #pwm-cells: should be 3. See pwm.txt in this directory for a description of
+    the cells format.
+  - clocks: From common clock binding, handle to the parent clock.
+
+Example:
+
+	pwm: pwm@01c20e00 {
+		compatible = "allwinner,sun7i-a20-pwm";
+		reg = <0x01c20e00 0xc>;
+		clocks = <&osc24M>;
+		#pwm-cells = <3>;
+		status = "disabled";
+	};

Documentation/devicetree/bindings/thermal/exynos-thermal.txt

@@ -12,6 +12,7 @@
 	       "samsung,exynos5420-tmu-ext-triminfo" for TMU channels 2, 3 and 4
 			Exynos5420 (Must pass triminfo base and triminfo clock)
 	       "samsung,exynos5440-tmu"
+	       "samsung,exynos7-tmu"
 - interrupt-parent : The phandle for the interrupt controller
 - reg : Address range of the thermal registers. For soc's which has multiple
 	instances of TMU and some registers are shared across all TMU's like
@@ -32,13 +33,28 @@
 - clocks : The main clocks for TMU device
 	-- 1. operational clock for TMU channel
 	-- 2. optional clock to access the shared registers of TMU channel
+	-- 3. optional special clock for functional operation
 - clock-names : Thermal system clock name
 	-- "tmu_apbif" operational clock for current TMU channel
 	-- "tmu_triminfo_apbif" clock to access the shared triminfo register
 		for current TMU channel
+	-- "tmu_sclk" clock for functional operation of the current TMU
+		channel
 - vtmu-supply: This entry is optional and provides the regulator node supplying
 		voltage to TMU. If needed this entry can be placed inside
 		board/platform specific dts file.
+Following properties are mandatory (depending on SoC):
+- samsung,tmu_gain: Gain value for internal TMU operation.
+- samsung,tmu_reference_voltage: Value of TMU IP block's reference voltage
+- samsung,tmu_noise_cancel_mode: Mode for noise cancellation
+- samsung,tmu_efuse_value: Default level of temperature - it is needed when
+			   in factory fusing produced wrong value
+- samsung,tmu_min_efuse_value: Minimum temperature fused value
+- samsung,tmu_max_efuse_value: Maximum temperature fused value
+- samsung,tmu_first_point_trim: First point trimming value
+- samsung,tmu_second_point_trim: Second point trimming value
+- samsung,tmu_default_temp_offset: Default temperature offset
+- samsung,tmu_cal_type: Callibration type
 
 Example 1):
 
@@ -51,6 +67,7 @@ Example 1):
 		clock-names = "tmu_apbif";
 		status = "disabled";
 		vtmu-supply = <&tmu_regulator_node>;
+		#include "exynos4412-tmu-sensor-conf.dtsi"
 	};
 
 Example 2):
@@ -61,6 +78,7 @@ Example 2):
 		interrupts = <0 58 0>;
 		clocks = <&clock 21>;
 		clock-names = "tmu_apbif";
+		#include "exynos5440-tmu-sensor-conf.dtsi"
 	};
 
 Example 3): (In case of Exynos5420 "with misplaced TRIMINFO register")
@@ -70,6 +88,7 @@ Example 3): (In case of Exynos5420 "with misplaced TRIMINFO register")
 		interrupts = <0 184 0>;
 		clocks = <&clock 318>, <&clock 318>;
 		clock-names = "tmu_apbif", "tmu_triminfo_apbif";
+		#include "exynos4412-tmu-sensor-conf.dtsi"
 	};
 
 	tmu_cpu3: tmu@1006c000 {
@@ -78,6 +97,7 @@ Example 3): (In case of Exynos5420 "with misplaced TRIMINFO register")
 		interrupts = <0 185 0>;
 		clocks = <&clock 318>, <&clock 319>;
 		clock-names = "tmu_apbif", "tmu_triminfo_apbif";
+		#include "exynos4412-tmu-sensor-conf.dtsi"
 	};
 
 	tmu_gpu: tmu@100a0000 {
@@ -86,6 +106,7 @@ Example 3): (In case of Exynos5420 "with misplaced TRIMINFO register")
 		interrupts = <0 215 0>;
 		clocks = <&clock 319>, <&clock 318>;
 		clock-names = "tmu_apbif", "tmu_triminfo_apbif";
+		#include "exynos4412-tmu-sensor-conf.dtsi"
 	};
 
 Note: For multi-instance tmu each instance should have an alias correctly

Documentation/devicetree/bindings/thermal/thermal.txt

@@ -251,24 +251,24 @@ ocp {
 };
 
 thermal-zones {
-	cpu-thermal: cpu-thermal {
+	cpu_thermal: cpu-thermal {
 		polling-delay-passive = <250>; /* milliseconds */
 		polling-delay = <1000>; /* milliseconds */
 
 		thermal-sensors = <&bandgap0>;
 
 		trips {
-			cpu-alert0: cpu-alert {
+			cpu_alert0: cpu-alert0 {
 				temperature = <90000>; /* millicelsius */
 				hysteresis = <2000>; /* millicelsius */
 				type = "active";
 			};
-			cpu-alert1: cpu-alert {
+			cpu_alert1: cpu-alert1 {
 				temperature = <100000>; /* millicelsius */
 				hysteresis = <2000>; /* millicelsius */
 				type = "passive";
 			};
-			cpu-crit: cpu-crit {
+			cpu_crit: cpu-crit {
 				temperature = <125000>; /* millicelsius */
 				hysteresis = <2000>; /* millicelsius */
 				type = "critical";
@@ -277,17 +277,17 @@ thermal-zones {
 
 		cooling-maps {
 			map0 {
-				trip = <&cpu-alert0>;
-				cooling-device = <&fan0 THERMAL_NO_LIMITS 4>;
+				trip = <&cpu_alert0>;
+				cooling-device = <&fan0 THERMAL_NO_LIMIT 4>;
 			};
 			map1 {
-				trip = <&cpu-alert1>;
-				cooling-device = <&fan0 5 THERMAL_NO_LIMITS>;
+				trip = <&cpu_alert1>;
+				cooling-device = <&fan0 5 THERMAL_NO_LIMIT>;
 			};
 			map2 {
-				trip = <&cpu-alert1>;
+				trip = <&cpu_alert1>;
 				cooling-device =
-				    <&cpu0 THERMAL_NO_LIMITS THERMAL_NO_LIMITS>;
+				    <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
 			};
 		};
 	};
@@ -298,13 +298,13 @@ used to monitor the zone 'cpu-thermal' using its sole sensor. A fan
 device (fan0) is controlled via I2C bus 1, at address 0x48, and has ten
 different cooling states 0-9. It is used to remove the heat out of
 the thermal zone 'cpu-thermal' using its cooling states
-from its minimum to 4, when it reaches trip point 'cpu-alert0'
+from its minimum to 4, when it reaches trip point 'cpu_alert0'
 at 90C, as an example of active cooling. The same cooling device is used at
-'cpu-alert1', but from 5 to its maximum state. The cpu@0 device is also
+'cpu_alert1', but from 5 to its maximum state. The cpu@0 device is also
 linked to the same thermal zone, 'cpu-thermal', as a passive cooling device,
-using all its cooling states at trip point 'cpu-alert1',
+using all its cooling states at trip point 'cpu_alert1',
 which is a trip point at 100C. On the thermal zone 'cpu-thermal', at the
-temperature of 125C, represented by the trip point 'cpu-crit', the silicon
+temperature of 125C, represented by the trip point 'cpu_crit', the silicon
 is not reliable anymore.
 
 (b) - IC with several internal sensors
@@ -329,7 +329,7 @@ ocp {
 };
 
 thermal-zones {
-	cpu-thermal: cpu-thermal {
+	cpu_thermal: cpu-thermal {
 		polling-delay-passive = <250>; /* milliseconds */
 		polling-delay = <1000>; /* milliseconds */
 
@@ -338,12 +338,12 @@ thermal-zones {
 
 		trips {
 			/* each zone within the SoC may have its own trips */
-			cpu-alert: cpu-alert {
+			cpu_alert: cpu-alert {
 				temperature = <100000>; /* millicelsius */
 				hysteresis = <2000>; /* millicelsius */
 				type = "passive";
 			};
-			cpu-crit: cpu-crit {
+			cpu_crit: cpu-crit {
 				temperature = <125000>; /* millicelsius */
 				hysteresis = <2000>; /* millicelsius */
 				type = "critical";
@@ -356,7 +356,7 @@ thermal-zones {
 		};
 	};
 
-	gpu-thermal: gpu-thermal {
+	gpu_thermal: gpu-thermal {
 		polling-delay-passive = <120>; /* milliseconds */
 		polling-delay = <1000>; /* milliseconds */
 
@@ -365,12 +365,12 @@ thermal-zones {
 
 		trips {
 			/* each zone within the SoC may have its own trips */
-			gpu-alert: gpu-alert {
+			gpu_alert: gpu-alert {
 				temperature = <90000>; /* millicelsius */
 				hysteresis = <2000>; /* millicelsius */
 				type = "passive";
 			};
-			gpu-crit: gpu-crit {
+			gpu_crit: gpu-crit {
 				temperature = <105000>; /* millicelsius */
 				hysteresis = <2000>; /* millicelsius */
 				type = "critical";
@@ -383,7 +383,7 @@ thermal-zones {
 		};
 	};
 
-	dsp-thermal: dsp-thermal {
+	dsp_thermal: dsp-thermal {
 		polling-delay-passive = <50>; /* milliseconds */
 		polling-delay = <1000>; /* milliseconds */
 
@@ -392,12 +392,12 @@ thermal-zones {
 
 		trips {
 			/* each zone within the SoC may have its own trips */
-			dsp-alert: gpu-alert {
+			dsp_alert: dsp-alert {
 				temperature = <90000>; /* millicelsius */
 				hysteresis = <2000>; /* millicelsius */
 				type = "passive";
 			};
-			dsp-crit: gpu-crit {
+			dsp_crit: gpu-crit {
 				temperature = <135000>; /* millicelsius */
 				hysteresis = <2000>; /* millicelsius */
 				type = "critical";
@@ -457,7 +457,7 @@ ocp {
 };
 
 thermal-zones {
-	cpu-thermal: cpu-thermal {
+	cpu_thermal: cpu-thermal {
 		polling-delay-passive = <250>; /* milliseconds */
 		polling-delay = <1000>; /* milliseconds */
 
@@ -508,7 +508,7 @@ with many sensors and many cooling devices.
 	/*
 	 * An IC with several temperature sensor.
 	 */
-	adc-dummy: sensor@0x50 {
+	adc_dummy: sensor@0x50 {
 		...
 		#thermal-sensor-cells = <1>; /* sensor internal ID */
 	};
@@ -520,7 +520,7 @@ thermal-zones {
 		polling-delay = <2500>; /* milliseconds */
 
 				/* sensor       ID */
-		thermal-sensors = <&adc-dummy     4>;
+		thermal-sensors = <&adc_dummy     4>;
 
 		trips {
 			...
@@ -531,14 +531,14 @@ thermal-zones {
 		};
 	};
 
-	board-thermal: board-thermal {
+	board_thermal: board-thermal {
 		polling-delay-passive = <1000>; /* milliseconds */
 		polling-delay = <2500>; /* milliseconds */
 
 				/* sensor       ID */
-		thermal-sensors = <&adc-dummy     0>, /* pcb top edge */
-				  <&adc-dummy     1>, /* lcd */
-				  <&adc-dymmy     2>; /* back cover */
+		thermal-sensors = <&adc_dummy     0>, /* pcb top edge */
+				  <&adc_dummy     1>, /* lcd */
+				  <&adc_dummy     2>; /* back cover */
 		/*
 		 * An array of coefficients describing the sensor
 		 * linear relation. E.g.:
@@ -548,22 +548,22 @@ thermal-zones {
 
 		trips {
 			/* Trips are based on resulting linear equation */
-			cpu-trip: cpu-trip {
+			cpu_trip: cpu-trip {
 				temperature = <60000>; /* millicelsius */
 				hysteresis = <2000>; /* millicelsius */
 				type = "passive";
 			};
-			gpu-trip: gpu-trip {
+			gpu_trip: gpu-trip {
 				temperature = <55000>; /* millicelsius */
 				hysteresis = <2000>; /* millicelsius */
 				type = "passive";
 			}
-			lcd-trip: lcp-trip {
+			lcd_trip: lcp-trip {
 				temperature = <53000>; /* millicelsius */
 				hysteresis = <2000>; /* millicelsius */
 				type = "passive";
 			};
-			crit-trip: crit-trip {
+			crit_trip: crit-trip {
 				temperature = <68000>; /* millicelsius */
 				hysteresis = <2000>; /* millicelsius */
 				type = "critical";
@@ -572,17 +572,17 @@ thermal-zones {
 
 		cooling-maps {
 			map0 {
-				trip = <&cpu-trip>;
+				trip = <&cpu_trip>;
 				cooling-device = <&cpu0 0 2>;
 				contribution = <55>;
 			};
 			map1 {
-				trip = <&gpu-trip>;
+				trip = <&gpu_trip>;
 				cooling-device = <&gpu0 0 2>;
 				contribution = <20>;
 			};
 			map2 {
-				trip = <&lcd-trip>;
+				trip = <&lcd_trip>;
 				cooling-device = <&lcd0 5 10>;
 				contribution = <15>;
 			};

Documentation/devicetree/bindings/watchdog/gpio-wdt.txt

@@ -13,6 +13,11 @@ Required Properties:
     by the GPIO flags.
 - hw_margin_ms: Maximum time to reset watchdog circuit (milliseconds).
 
+Optional Properties:
+- always-running: If the watchdog timer cannot be disabled, add this flag to
+  have the driver keep toggling the signal without a client. It will only cease
+  to toggle the signal when the device is open and the timeout elapsed.
+
 Example:
 	watchdog: watchdog {
 		/* ADM706 */

Documentation/devicetree/bindings/watchdog/imgpdc-wdt.txt

@@ -0,0 +1,19 @@
+*ImgTec PowerDown Controller (PDC) Watchdog Timer (WDT)
+
+Required properties:
+- compatible : Should be "img,pdc-wdt"
+- reg : Should contain WDT registers location and length
+- clocks: Must contain an entry for each entry in clock-names.
+- clock-names: Should contain "wdt" and "sys"; the watchdog counter
+               clock and register interface clock respectively.
+- interrupts : Should contain WDT interrupt
+
+Examples:
+
+watchdog@18102100 {
+	compatible = "img,pdc-wdt";
+	reg = <0x18102100 0x100>;
+	clocks = <&pdc_wdt_clk>, <&sys_clk>;
+	clock-names = "wdt", "sys";
+	interrupts = <0 52 IRQ_TYPE_LEVEL_HIGH>;
+};

Documentation/devicetree/bindings/watchdog/ingenic,jz4740-wdt.txt

@@ -0,0 +1,12 @@
+Ingenic Watchdog Timer (WDT) Controller for JZ4740
+
+Required properties:
+compatible: "ingenic,jz4740-watchdog"
+reg: Register address and length for watchdog registers
+
+Example:
+
+watchdog: jz4740-watchdog@0x10002000 {
+	compatible = "ingenic,jz4740-watchdog";
+	reg = <0x10002000 0x100>;
+};

Documentation/devicetree/bindings/watchdog/mtk-wdt.txt

@@ -0,0 +1,13 @@
+Mediatek SoCs Watchdog timer
+
+Required properties:
+
+- compatible : should be "mediatek,mt6589-wdt"
+- reg : Specifies base physical address and size of the registers.
+
+Example:
+
+wdt: watchdog@010000000 {
+	compatible = "mediatek,mt6589-wdt";
+	reg = <0x10000000 0x18>;
+};

Documentation/dmaengine/provider.txt

@@ -113,6 +113,31 @@ need to initialize a few fields in there:
   * channels:	should be initialized as a list using the
 		INIT_LIST_HEAD macro for example
 
+  * src_addr_widths:
+    - should contain a bitmask of the supported source transfer width
+
+  * dst_addr_widths:
+    - should contain a bitmask of the supported destination transfer
+      width
+
+  * directions:
+    - should contain a bitmask of the supported slave directions
+      (i.e. excluding mem2mem transfers)
+
+  * residue_granularity:
+    - Granularity of the transfer residue reported to dma_set_residue.
+    - This can be either:
+      + Descriptor
+        -> Your device doesn't support any kind of residue
+           reporting. The framework will only know that a particular
+           transaction descriptor is done.
+      + Segment
+        -> Your device is able to report which chunks have been
+           transferred
+      + Burst
+        -> Your device is able to report which burst have been
+           transferred
+
   * dev: 	should hold the pointer to the struct device associated
 		to your current driver instance.
 
@@ -274,48 +299,36 @@ supported.
        account the current period.
      - This function can be called in an interrupt context.
 
-   * device_control
-     - Used by client drivers to control and configure the channel it
-       has a handle on.
-     - Called with a command and an argument
-       + The command is one of the values listed by the enum
-         dma_ctrl_cmd. The valid commands are:
-         + DMA_PAUSE
-           + Pauses a transfer on the channel
-           + This command should operate synchronously on the channel,
-             pausing right away the work of the given channel
-         + DMA_RESUME
-           + Restarts a transfer on the channel
-           + This command should operate synchronously on the channel,
-             resuming right away the work of the given channel
-         + DMA_TERMINATE_ALL
-           + Aborts all the pending and ongoing transfers on the
-             channel
-           + This command should operate synchronously on the channel,
-             terminating right away all the channels
-         + DMA_SLAVE_CONFIG
-           + Reconfigures the channel with passed configuration
-           + This command should NOT perform synchronously, or on any
-             currently queued transfers, but only on subsequent ones
-           + In this case, the function will receive a
-             dma_slave_config structure pointer as an argument, that
-             will detail which configuration to use.
-           + Even though that structure contains a direction field,
-             this field is deprecated in favor of the direction
-             argument given to the prep_* functions
-         + FSLDMA_EXTERNAL_START
-           + TODO: Why does that even exist?
-       + The argument is an opaque unsigned long. This actually is a
-         pointer to a struct dma_slave_config that should be used only
-         in the DMA_SLAVE_CONFIG.
-
-  * device_slave_caps
-    - Called through the framework by client drivers in order to have
-      an idea of what are the properties of the channel allocated to
-      them.
-    - Such properties are the buswidth, available directions, etc.
-    - Required for every generic layer doing DMA transfers, such as
-      ASoC.
+   * device_config
+     - Reconfigures the channel with the configuration given as
+       argument
+     - This command should NOT perform synchronously, or on any
+       currently queued transfers, but only on subsequent ones
+     - In this case, the function will receive a dma_slave_config
+       structure pointer as an argument, that will detail which
+       configuration to use.
+     - Even though that structure contains a direction field, this
+       field is deprecated in favor of the direction argument given to
+       the prep_* functions
+     - This call is mandatory for slave operations only. This should NOT be
+       set or expected to be set for memcpy operations.
+       If a driver support both, it should use this call for slave
+       operations only and not for memcpy ones.
+
+   * device_pause
+     - Pauses a transfer on the channel
+     - This command should operate synchronously on the channel,
+       pausing right away the work of the given channel
+
+   * device_resume
+     - Resumes a transfer on the channel
+     - This command should operate synchronously on the channel,
+       pausing right away the work of the given channel
+
+   * device_terminate_all
+     - Aborts all the pending and ongoing transfers on the channel
+     - This command should operate synchronously on the channel,
+       terminating right away all the channels
 
 Misc notes (stuff that should be documented, but don't really know
 where to put them)

Documentation/filesystems/Locking

@@ -164,8 +164,6 @@ the block device inode.  See there for more details.
 
 --------------------------- file_system_type ---------------------------
 prototypes:
-	int (*get_sb) (struct file_system_type *, int,
-		       const char *, void *, struct vfsmount *);
 	struct dentry *(*mount) (struct file_system_type *, int,
 		       const char *, void *);
 	void (*kill_sb) (struct super_block *);

Documentation/filesystems/dlmfs.txt

@@ -5,8 +5,8 @@ system.
 
 dlmfs is built with OCFS2 as it requires most of its infrastructure.
 
-Project web page:    http://oss.oracle.com/projects/ocfs2
-Tools web page:      http://oss.oracle.com/projects/ocfs2-tools
+Project web page:    http://ocfs2.wiki.kernel.org
+Tools web page:      https://github.com/markfasheh/ocfs2-tools
 OCFS2 mailing lists: http://oss.oracle.com/projects/ocfs2/mailman/
 
 All code copyright 2005 Oracle except when otherwise noted.

Documentation/filesystems/ocfs2.txt

@@ -8,8 +8,8 @@ also make it attractive for non-clustered use.
 You'll want to install the ocfs2-tools package in order to at least
 get "mount.ocfs2" and "ocfs2_hb_ctl".
 
-Project web page:    http://oss.oracle.com/projects/ocfs2
-Tools web page:      http://oss.oracle.com/projects/ocfs2-tools
+Project web page:    http://ocfs2.wiki.kernel.org
+Tools git tree:      https://github.com/markfasheh/ocfs2-tools
 OCFS2 mailing lists: http://oss.oracle.com/projects/ocfs2/mailman/
 
 All code copyright 2005 Oracle except when otherwise noted.

Documentation/filesystems/overlayfs.txt

@@ -159,6 +159,22 @@ overlay filesystem (though an operation on the name of the file such as
 rename or unlink will of course be noticed and handled).
 
 
+Multiple lower layers
+---------------------
+
+Multiple lower layers can now be given using the the colon (":") as a
+separator character between the directory names.  For example:
+
+  mount -t overlay overlay -olowerdir=/lower1:/lower2:/lower3 /merged
+
+As the example shows, "upperdir=" and "workdir=" may be omitted.  In
+that case the overlay will be read-only.
+
+The specified lower directories will be stacked beginning from the
+rightmost one and going left.  In the above example lower1 will be the
+top, lower2 the middle and lower3 the bottom layer.
+
+
 Non-standard behavior
 ---------------------
 
@@ -196,3 +212,15 @@ Changes to the underlying filesystems while part of a mounted overlay
 filesystem are not allowed.  If the underlying filesystem is changed,
 the behavior of the overlay is undefined, though it will not result in
 a crash or deadlock.
+
+Testsuite
+---------
+
+There's testsuite developed by David Howells at:
+
+  git://git.infradead.org/users/dhowells/unionmount-testsuite.git
+
+Run as root:
+
+  # cd unionmount-testsuite
+  # ./run --ov

Documentation/i2c/functionality

@@ -12,7 +12,7 @@ FUNCTIONALITY CONSTANTS
 -----------------------
 
 For the most up-to-date list of functionality constants, please check
-<linux/i2c.h>!
+<uapi/linux/i2c.h>!
 
   I2C_FUNC_I2C                    Plain i2c-level commands (Pure SMBus
                                   adapters typically can not do these)

Documentation/ia64/paravirt_ops.txt

@@ -1,137 +0,0 @@
-Paravirt_ops on IA64
-====================
-                          21 May 2008, Isaku Yamahata <yamahata@valinux.co.jp>
-
-
-Introduction
-------------
-The aim of this documentation is to help with maintainability and/or to
-encourage people to use paravirt_ops/IA64.
-
-paravirt_ops (pv_ops in short) is a way for virtualization support of
-Linux kernel on x86. Several ways for virtualization support were
-proposed, paravirt_ops is the winner.
-On the other hand, now there are also several IA64 virtualization
-technologies like kvm/IA64, xen/IA64 and many other academic IA64
-hypervisors so that it is good to add generic virtualization
-infrastructure on Linux/IA64.
-
-
-What is paravirt_ops?
----------------------
-It has been developed on x86 as virtualization support via API, not ABI.
-It allows each hypervisor to override operations which are important for
-hypervisors at API level. And it allows a single kernel binary to run on
-all supported execution environments including native machine.
-Essentially paravirt_ops is a set of function pointers which represent
-operations corresponding to low level sensitive instructions and high
-level functionalities in various area. But one significant difference
-from usual function pointer table is that it allows optimization with
-binary patch. It is because some of these operations are very
-performance sensitive and indirect call overhead is not negligible.
-With binary patch, indirect C function call can be transformed into
-direct C function call or in-place execution to eliminate the overhead.
-
-Thus, operations of paravirt_ops are classified into three categories.
-- simple indirect call
-  These operations correspond to high level functionality so that the
-  overhead of indirect call isn't very important.
-
-- indirect call which allows optimization with binary patch
-  Usually these operations correspond to low level instructions. They
-  are called frequently and performance critical. So the overhead is
-  very important.
-
-- a set of macros for hand written assembly code
-  Hand written assembly codes (.S files) also need paravirtualization
-  because they include sensitive instructions or some of code paths in
-  them are very performance critical.
-
-
-The relation to the IA64 machine vector
----------------------------------------
-Linux/IA64 has the IA64 machine vector functionality which allows the
-kernel to switch implementations (e.g. initialization, ipi, dma api...)
-depending on executing platform.
-We can replace some implementations very easily defining a new machine
-vector. Thus another approach for virtualization support would be
-enhancing the machine vector functionality.
-But paravirt_ops approach was taken because
-- virtualization support needs wider support than machine vector does.
-  e.g. low level instruction paravirtualization. It must be
-       initialized very early before platform detection.
-
-- virtualization support needs more functionality like binary patch.
-  Probably the calling overhead might not be very large compared to the
-  emulation overhead of virtualization. However in the native case, the
-  overhead should be eliminated completely.
-  A single kernel binary should run on each environment including native,
-  and the overhead of paravirt_ops on native environment should be as
-  small as possible.
-
-- for full virtualization technology, e.g. KVM/IA64 or
-  Xen/IA64 HVM domain, the result would be
-  (the emulated platform machine vector. probably dig) + (pv_ops).
-  This means that the virtualization support layer should be under
-  the machine vector layer.
-
-Possibly it might be better to move some function pointers from
-paravirt_ops to machine vector. In fact, Xen domU case utilizes both
-pv_ops and machine vector.
-
-
-IA64 paravirt_ops
------------------
-In this section, the concrete paravirt_ops will be discussed.
-Because of the architecture difference between ia64 and x86, the
-resulting set of functions is very different from x86 pv_ops.
-
-- C function pointer tables
-They are not very performance critical so that simple C indirect
-function call is acceptable. The following structures are defined at
-this moment. For details see linux/include/asm-ia64/paravirt.h
-  - struct pv_info
-    This structure describes the execution environment.
-  - struct pv_init_ops
-    This structure describes the various initialization hooks.
-  - struct pv_iosapic_ops
-    This structure describes hooks to iosapic operations.
-  - struct pv_irq_ops
-    This structure describes hooks to irq related operations
-  - struct pv_time_op
-    This structure describes hooks to steal time accounting.
-
-- a set of indirect calls which need optimization
-Currently this class of functions correspond to a subset of IA64
-intrinsics. At this moment the optimization with binary patch isn't
-implemented yet.
-struct pv_cpu_op is defined. For details see
-linux/include/asm-ia64/paravirt_privop.h
-Mostly they correspond to ia64 intrinsics 1-to-1.
-Caveat: Now they are defined as C indirect function pointers, but in
-order to support binary patch optimization, they will be changed
-using GCC extended inline assembly code.
-
-- a set of macros for hand written assembly code (.S files)
-For maintenance purpose, the taken approach for .S files is single
-source code and compile multiple times with different macros definitions.
-Each pv_ops instance must define those macros to compile.
-The important thing here is that sensitive, but non-privileged
-instructions must be paravirtualized and that some privileged
-instructions also need paravirtualization for reasonable performance.
-Developers who modify .S files must be aware of that. At this moment
-an easy checker is implemented to detect paravirtualization breakage.
-But it doesn't cover all the cases.
-
-Sometimes this set of macros is called pv_cpu_asm_op. But there is no
-corresponding structure in the source code.
-Those macros mostly 1:1 correspond to a subset of privileged
-instructions. See linux/include/asm-ia64/native/inst.h.
-And some functions written in assembly also need to be overrided so
-that each pv_ops instance have to define some macros. Again see
-linux/include/asm-ia64/native/inst.h.
-
-
-Those structures must be initialized very early before start_kernel.
-Probably initialized in head.S using multi entry point or some other trick.
-For native case implementation see linux/arch/ia64/kernel/paravirt.c.

Documentation/input/alps.txt

@@ -3,8 +3,8 @@ ALPS Touchpad Protocol
 
 Introduction
 ------------
-Currently the ALPS touchpad driver supports five protocol versions in use by
-ALPS touchpads, called versions 1, 2, 3, 4 and 5.
+Currently the ALPS touchpad driver supports seven protocol versions in use by
+ALPS touchpads, called versions 1, 2, 3, 4, 5, 6 and 7.
 
 Since roughly mid-2010 several new ALPS touchpads have been released and
 integrated into a variety of laptops and netbooks.  These new touchpads
@@ -240,3 +240,67 @@ For mt, the format is:
  byte 3:    0  x23  x22   x21 x20  x19  x18   x17
  byte 4:    0   x9   x8    x7  x6   x5   x4    x3
  byte 5:    0  x16  x15   x14 x13  x12  x11   x10
+
+ALPS Absolute Mode - Protocol Version 6
+---------------------------------------
+
+For trackstick packet, the format is:
+
+ byte 0:    1    1    1    1    1    1    1    1
+ byte 1:    0   X6   X5   X4   X3   X2   X1   X0
+ byte 2:    0   Y6   Y5   Y4   Y3   Y2   Y1   Y0
+ byte 3:    ?   Y7   X7    ?    ?    M    R    L
+ byte 4:   Z7   Z6   Z5   Z4   Z3   Z2   Z1   Z0
+ byte 5:    0    1    1    1    1    1    1    1
+
+For touchpad packet, the format is:
+
+ byte 0:    1    1    1    1    1    1    1    1
+ byte 1:    0    0    0    0   x3   x2   x1   x0
+ byte 2:    0    0    0    0   y3   y2   y1   y0
+ byte 3:    ?   x7   x6   x5   x4    ?    r    l
+ byte 4:    ?   y7   y6   y5   y4    ?    ?    ?
+ byte 5:   z7   z6   z5   z4   z3   z2   z1   z0
+
+(v6 touchpad does not have middle button)
+
+ALPS Absolute Mode - Protocol Version 7
+---------------------------------------
+
+For trackstick packet, the format is:
+
+ byte 0:    0    1    0    0    1    0    0    0
+ byte 1:    1    1    *    *    1    M    R    L
+ byte 2:   X7    1   X5   X4   X3   X2   X1   X0
+ byte 3:   Z6    1   Y6   X6    1   Y2   Y1   Y0
+ byte 4:   Y7    0   Y5   Y4   Y3    1    1    0
+ byte 5:  T&P    0   Z5   Z4   Z3   Z2   Z1   Z0
+
+For touchpad packet, the format is:
+
+         packet-fmt     b7     b6     b5     b4     b3     b2     b1     b0
+ byte 0: TWO & MULTI     L      1      R      M      1   Y0-2   Y0-1   Y0-0
+ byte 0: NEW             L      1   X1-5      1      1   Y0-2   Y0-1   Y0-0
+ byte 1:             Y0-10   Y0-9   Y0-8   Y0-7   Y0-6   Y0-5   Y0-4   Y0-3
+ byte 2:             X0-11      1  X0-10   X0-9   X0-8   X0-7   X0-6   X0-5
+ byte 3:             X1-11      1   X0-4   X0-3      1   X0-2   X0-1   X0-0
+ byte 4: TWO         X1-10    TWO   X1-9   X1-8   X1-7   X1-6   X1-5   X1-4
+ byte 4: MULTI       X1-10    TWO   X1-9   X1-8   X1-7   X1-6   Y1-5      1
+ byte 4: NEW         X1-10    TWO   X1-9   X1-8   X1-7   X1-6      0      0
+ byte 5: TWO & NEW   Y1-10      0   Y1-9   Y1-8   Y1-7   Y1-6   Y1-5   Y1-4
+ byte 5: MULTI       Y1-10      0   Y1-9   Y1-8   Y1-7   Y1-6    F-1    F-0
+
+ L:         Left button
+ R / M:     Non-clickpads: Right / Middle button
+            Clickpads: When > 2 fingers are down, and some fingers
+            are in the button area, then the 2 coordinates reported
+            are for fingers outside the button area and these report
+            extra fingers being present in the right / left button
+            area. Note these fingers are not added to the F field!
+            so if a TWO packet is received and R = 1 then there are
+            3 fingers down, etc.
+ TWO:       1: Two touches present, byte 0/4/5 are in TWO fmt
+            0: If byte 4 bit 0 is 1, then byte 0/4/5 are in MULTI fmt
+               otherwise byte 0 bit 4 must be set and byte 0/4/5 are
+               in NEW fmt
+ F:         Number of fingers - 3, 0 means 3 fingers, 1 means 4 ...

Documentation/kbuild/makefiles.txt

@@ -524,15 +524,16 @@ more details, with real examples.
 	Example:
 		#arch/x86/Makefile
 		cflags-y += $(shell \
-		if [ $(call cc-version) -ge 0300 ] ; then \
+		if [ $(cc-version) -ge 0300 ] ; then \
 			echo "-mregparm=3"; fi ;)
 
 	In the above example, -mregparm=3 is only used for gcc version greater
 	than or equal to gcc 3.0.
 
     cc-ifversion
-	cc-ifversion tests the version of $(CC) and equals last argument if
-	version expression is true.
+	cc-ifversion tests the version of $(CC) and equals the fourth parameter
+	if version expression is true, or the fifth (if given) if the version
+	expression is false.
 
 	Example:
 		#fs/reiserfs/Makefile
@@ -552,7 +553,7 @@ more details, with real examples.
 
 	Example:
 		#arch/powerpc/Makefile
-		$(Q)if test "$(call cc-fullversion)" = "040200" ; then \
+		$(Q)if test "$(cc-fullversion)" = "040200" ; then \
 			echo -n '*** GCC-4.2.0 cannot compile the 64-bit powerpc ' ; \
 			false ; \
 		fi
@@ -751,12 +752,12 @@ generated by kbuild are deleted all over the kernel src tree when
 Additional files can be specified in kbuild makefiles by use of $(clean-files).
 
 	Example:
-		#drivers/pci/Makefile
-		clean-files := devlist.h classlist.h
+		#lib/Makefile
+		clean-files := crc32table.h
 
 When executing "make clean", the two files "devlist.h classlist.h" will be
 deleted. Kbuild will assume files to be in the same relative directory as the
-Makefile except if an absolute path is specified (path starting with '/').
+Makefile, except if prefixed with $(objtree).
 
 To delete a directory hierarchy use:
 
@@ -764,9 +765,8 @@ To delete a directory hierarchy use:
 		#scripts/package/Makefile
 		clean-dirs := $(objtree)/debian/
 
-This will delete the directory debian, including all subdirectories.
-Kbuild will assume the directories to be in the same relative path as the
-Makefile if no absolute path is specified (path does not start with '/').
+This will delete the directory debian in the toplevel directory, including all
+subdirectories.
 
 To exclude certain files from make clean, use the $(no-clean-files) variable.
 This is only a special case used in the top level Kbuild file:

Documentation/virtual/00-INDEX

@@ -2,6 +2,9 @@ Virtualization support in the Linux kernel.
 
 00-INDEX
 	- this file.
+
+paravirt_ops.txt
+	- Describes the Linux kernel pv_ops to support different hypervisors
 kvm/
 	- Kernel Virtual Machine.  See also http://linux-kvm.org
 uml/

Documentation/virtual/paravirt_ops.txt

@@ -0,0 +1,32 @@
+Paravirt_ops
+============
+
+Linux provides support for different hypervisor virtualization technologies.
+Historically different binary kernels would be required in order to support
+different hypervisors, this restriction was removed with pv_ops.
+Linux pv_ops is a virtualization API which enables support for different
+hypervisors. It allows each hypervisor to override critical operations and
+allows a single kernel binary to run on all supported execution environments
+including native machine -- without any hypervisors.
+
+pv_ops provides a set of function pointers which represent operations
+corresponding to low level critical instructions and high level
+functionalities in various areas. pv-ops allows for optimizations at run
+time by enabling binary patching of the low-ops critical operations
+at boot time.
+
+pv_ops operations are classified into three categories:
+
+- simple indirect call
+  These operations correspond to high level functionality where it is
+  known that the overhead of indirect call isn't very important.
+
+- indirect call which allows optimization with binary patch
+  Usually these operations correspond to low level critical instructions. They
+  are called frequently and are performance critical. The overhead is
+  very important.
+
+- a set of macros for hand written assembly code
+  Hand written assembly codes (.S files) also need paravirtualization
+  because they include sensitive instructions or some of code paths in
+  them are very performance critical.

Documentation/x86/zero-page.txt

@@ -3,7 +3,7 @@ protocol of kernel. These should be filled by bootloader or 16-bit
 real-mode setup code of the kernel. References/settings to it mainly
 are in:
 
-  arch/x86/include/asm/bootparam.h
+  arch/x86/include/uapi/asm/bootparam.h
 
 
 Offset	Proto	Name		Meaning

Kbuild

@@ -5,24 +5,23 @@
 # 2) Generate asm-offsets.h (may need bounds.h)
 # 3) Check for missing system calls
 
-#####
-# 1) Generate bounds.h
-
-bounds-file := include/generated/bounds.h
-
-always  := $(bounds-file)
-targets := $(bounds-file) kernel/bounds.s
+# Default sed regexp - multiline due to syntax constraints
+define sed-y
+	"/^->/{s:->#\(.*\):/* \1 */:; \
+	s:^->\([^ ]*\) [\$$#]*\([-0-9]*\) \(.*\):#define \1 \2 /* \3 */:; \
+	s:^->\([^ ]*\) [\$$#]*\([^ ]*\) \(.*\):#define \1 \2 /* \3 */:; \
+	s:->::; p;}"
+endef
 
-quiet_cmd_bounds = GEN     $@
-define cmd_bounds
+quiet_cmd_offsets = GEN     $@
+define cmd_offsets
 	(set -e; \
-	 echo "#ifndef __LINUX_BOUNDS_H__"; \
-	 echo "#define __LINUX_BOUNDS_H__"; \
+	 echo "#ifndef $2"; \
+	 echo "#define $2"; \
 	 echo "/*"; \
 	 echo " * DO NOT MODIFY."; \
 	 echo " *"; \
 	 echo " * This file was generated by Kbuild"; \
-	 echo " *"; \
 	 echo " */"; \
 	 echo ""; \
 	 sed -ne $(sed-y) $<; \
@@ -30,6 +29,14 @@ define cmd_bounds
 	 echo "#endif" ) > $@
 endef
 
+#####
+# 1) Generate bounds.h
+
+bounds-file := include/generated/bounds.h
+
+always  := $(bounds-file)
+targets := $(bounds-file) kernel/bounds.s
+
 # We use internal kbuild rules to avoid the "is up to date" message from make
 kernel/bounds.s: kernel/bounds.c FORCE
 	$(Q)mkdir -p $(dir $@)
@@ -37,7 +44,7 @@ kernel/bounds.s: kernel/bounds.c FORCE
 
 $(obj)/$(bounds-file): kernel/bounds.s Kbuild
 	$(Q)mkdir -p $(dir $@)
-	$(call cmd,bounds)
+	$(call cmd,offsets,__LINUX_BOUNDS_H__)
 
 #####
 # 2) Generate asm-offsets.h
@@ -49,32 +56,6 @@ always  += $(offsets-file)
 targets += $(offsets-file)
 targets += arch/$(SRCARCH)/kernel/asm-offsets.s
 
-
-# Default sed regexp - multiline due to syntax constraints
-define sed-y
-	"/^->/{s:->#\(.*\):/* \1 */:; \
-	s:^->\([^ ]*\) [\$$#]*\([-0-9]*\) \(.*\):#define \1 \2 /* \3 */:; \
-	s:^->\([^ ]*\) [\$$#]*\([^ ]*\) \(.*\):#define \1 \2 /* \3 */:; \
-	s:->::; p;}"
-endef
-
-quiet_cmd_offsets = GEN     $@
-define cmd_offsets
-	(set -e; \
-	 echo "#ifndef __ASM_OFFSETS_H__"; \
-	 echo "#define __ASM_OFFSETS_H__"; \
-	 echo "/*"; \
-	 echo " * DO NOT MODIFY."; \
-	 echo " *"; \
-	 echo " * This file was generated by Kbuild"; \
-	 echo " *"; \
-	 echo " */"; \
-	 echo ""; \
-	 sed -ne $(sed-y) $<; \
-	 echo ""; \
-	 echo "#endif" ) > $@
-endef
-
 # We use internal kbuild rules to avoid the "is up to date" message from make
 arch/$(SRCARCH)/kernel/asm-offsets.s: arch/$(SRCARCH)/kernel/asm-offsets.c \
                                       $(obj)/$(bounds-file) FORCE
@@ -82,7 +63,7 @@ arch/$(SRCARCH)/kernel/asm-offsets.s: arch/$(SRCARCH)/kernel/asm-offsets.c \
 	$(call if_changed_dep,cc_s_c)
 
 $(obj)/$(offsets-file): arch/$(SRCARCH)/kernel/asm-offsets.s Kbuild
-	$(call cmd,offsets)
+	$(call cmd,offsets,__ASM_OFFSETS_H__)
 
 #####
 # 3) Check for missing system calls

MAINTAINERS

@@ -2065,7 +2065,7 @@ F:	include/net/bluetooth/
 BONDING DRIVER
 M:	Jay Vosburgh <j.vosburgh@gmail.com>
 M:	Veaceslav Falico <vfalico@gmail.com>
-M:	Andy Gospodarek <andy@greyhouse.net>
+M:	Andy Gospodarek <gospo@cumulusnetworks.com>
 L:	netdev@vger.kernel.org
 W:	http://sourceforge.net/projects/bonding/
 S:	Supported
@@ -2433,7 +2433,8 @@ F:	arch/powerpc/oprofile/*cell*
 F:	arch/powerpc/platforms/cell/
 
 CEPH DISTRIBUTED FILE SYSTEM CLIENT
-M:	Sage Weil <sage@inktank.com>
+M:	Yan, Zheng <zyan@redhat.com>
+M:	Sage Weil <sage@redhat.com>
 L:	ceph-devel@vger.kernel.org
 W:	http://ceph.com/
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-client.git
@@ -3936,7 +3937,7 @@ S:	Maintained
 F:	drivers/staging/fbtft/
 
 FCOE SUBSYSTEM (libfc, libfcoe, fcoe)
-M:	Robert Love <robert.w.love@intel.com>
+M:	Vasu Dev <vasu.dev@intel.com>
 L:	fcoe-devel@open-fcoe.org
 W:	www.Open-FCoE.org
 S:	Supported
@@ -4092,6 +4093,12 @@ S:	Maintained
 F:	include/linux/platform_data/video-imxfb.h
 F:	drivers/video/fbdev/imxfb.c
 
+FREESCALE QUAD SPI DRIVER
+M:	Han Xu <han.xu@freescale.com>
+L:	linux-mtd@lists.infradead.org
+S:	Maintained
+F:	drivers/mtd/spi-nor/fsl-quadspi.c
+
 FREESCALE SOC FS_ENET DRIVER
 M:	Pantelis Antoniou <pantelis.antoniou@gmail.com>
 M:	Vitaly Bordug <vbordug@ru.mvista.com>
@@ -7206,8 +7213,7 @@ ORACLE CLUSTER FILESYSTEM 2 (OCFS2)
 M:	Mark Fasheh <mfasheh@suse.com>
 M:	Joel Becker <jlbec@evilplan.org>
 L:	ocfs2-devel@oss.oracle.com (moderated for non-subscribers)
-W:	http://oss.oracle.com/projects/ocfs2/
-T:	git git://git.kernel.org/pub/scm/linux/kernel/git/jlbec/ocfs2.git
+W:	http://ocfs2.wiki.kernel.org
 S:	Supported
 F:	Documentation/filesystems/ocfs2.txt
 F:	Documentation/filesystems/dlmfs.txt
@@ -7296,7 +7302,7 @@ M:	Alok Kataria <akataria@vmware.com>
 M:	Rusty Russell <rusty@rustcorp.com.au>
 L:	virtualization@lists.linux-foundation.org
 S:	Supported
-F:	Documentation/ia64/paravirt_ops.txt
+F:	Documentation/virtual/paravirt_ops.txt
 F:	arch/*/kernel/paravirt*
 F:	arch/*/include/asm/paravirt.h
 
@@ -7992,8 +7998,8 @@ S:	Supported
 F:	drivers/net/wireless/ath/wcn36xx/
 
 RADOS BLOCK DEVICE (RBD)
-M:	Yehuda Sadeh <yehuda@inktank.com>
-M:	Sage Weil <sage@inktank.com>
+M:	Ilya Dryomov <idryomov@gmail.com>
+M:	Sage Weil <sage@redhat.com>
 M:	Alex Elder <elder@kernel.org>
 M:	ceph-devel@vger.kernel.org
 W:	http://ceph.com/
@@ -8496,6 +8502,7 @@ SYNOPSYS DESIGNWARE DMAC DRIVER
 M:	Viresh Kumar <viresh.linux@gmail.com>
 M:	Andy Shevchenko <andriy.shevchenko@linux.intel.com>
 S:	Maintained
+F:	include/linux/dma/dw.h
 F:	include/linux/platform_data/dma-dw.h
 F:	drivers/dma/dw/
 
@@ -8558,7 +8565,7 @@ S:	Maintained
 F:	drivers/scsi/sr*
 
 SCSI RDMA PROTOCOL (SRP) INITIATOR
-M:	Bart Van Assche <bvanassche@acm.org>
+M:	Bart Van Assche <bart.vanassche@sandisk.com>
 L:	linux-rdma@vger.kernel.org
 S:	Supported
 W:	http://www.openfabrics.org
@@ -9710,6 +9717,11 @@ L:	linux-omap@vger.kernel.org
 S:	Maintained
 F:	drivers/thermal/ti-soc-thermal/
 
+TI CDCE706 CLOCK DRIVER
+M:	Max Filippov <jcmvbkbc@gmail.com>
+S:	Maintained
+F:	drivers/clk/clk-cdce706.c
+
 TI CLOCK DRIVER
 M:	Tero Kristo <t-kristo@ti.com>
 L:	linux-omap@vger.kernel.org

Makefile

@@ -1,8 +1,8 @@
-VERSION = 3
-PATCHLEVEL = 19
+VERSION = 4
+PATCHLEVEL = 0
 SUBLEVEL = 0
-EXTRAVERSION =
-NAME = Diseased Newt
+EXTRAVERSION = -rc2
+NAME = Hurr durr I'ma sheep
 
 # *DOCUMENTATION*
 # To see a list of typical targets execute "make help"
@@ -502,7 +502,7 @@ endif
 ifeq ($(KBUILD_EXTMOD),)
         ifneq ($(filter config %config,$(MAKECMDGOALS)),)
                 config-targets := 1
-                ifneq ($(filter-out config %config,$(MAKECMDGOALS)),)
+                ifneq ($(words $(MAKECMDGOALS)),1)
                         mixed-targets := 1
                 endif
         endif
@@ -1180,7 +1180,7 @@ CLEAN_DIRS  += $(MODVERDIR)
 # Directories & files removed with 'make mrproper'
 MRPROPER_DIRS  += include/config usr/include include/generated          \
 		  arch/*/include/generated .tmp_objdiff
-MRPROPER_FILES += .config .config.old .version .old_version $(version_h) \
+MRPROPER_FILES += .config .config.old .version .old_version \
 		  Module.symvers tags TAGS cscope* GPATH GTAGS GRTAGS GSYMS \
 		  signing_key.priv signing_key.x509 x509.genkey		\
 		  extra_certificates signing_key.x509.keyid		\

arch/alpha/include/asm/uaccess.h

@@ -27,7 +27,7 @@
 #define get_ds()  (KERNEL_DS)
 #define set_fs(x) (current_thread_info()->addr_limit = (x))
 
-#define segment_eq(a,b)	((a).seg == (b).seg)
+#define segment_eq(a, b)	((a).seg == (b).seg)
 
 /*
  * Is a address valid? This does a straightforward calculation rather
@@ -39,13 +39,13 @@
  *  - AND "addr+size" doesn't have any high-bits set
  *  - OR we are in kernel mode.
  */
-#define __access_ok(addr,size,segment) \
+#define __access_ok(addr, size, segment) \
 	(((segment).seg & (addr | size | (addr+size))) == 0)
 
-#define access_ok(type,addr,size)				\
+#define access_ok(type, addr, size)				\
 ({								\
 	__chk_user_ptr(addr);					\
-	__access_ok(((unsigned long)(addr)),(size),get_fs());	\
+	__access_ok(((unsigned long)(addr)), (size), get_fs());	\
 })
 
 /*
@@ -60,20 +60,20 @@
  * (a) re-use the arguments for side effects (sizeof/typeof is ok)
  * (b) require any knowledge of processes at this stage
  */
-#define put_user(x,ptr) \
-  __put_user_check((__typeof__(*(ptr)))(x),(ptr),sizeof(*(ptr)),get_fs())
-#define get_user(x,ptr) \
-  __get_user_check((x),(ptr),sizeof(*(ptr)),get_fs())
+#define put_user(x, ptr) \
+  __put_user_check((__typeof__(*(ptr)))(x), (ptr), sizeof(*(ptr)), get_fs())
+#define get_user(x, ptr) \
+  __get_user_check((x), (ptr), sizeof(*(ptr)), get_fs())
 
 /*
  * The "__xxx" versions do not do address space checking, useful when
  * doing multiple accesses to the same area (the programmer has to do the
  * checks by hand with "access_ok()")
  */
-#define __put_user(x,ptr) \
-  __put_user_nocheck((__typeof__(*(ptr)))(x),(ptr),sizeof(*(ptr)))
-#define __get_user(x,ptr) \
-  __get_user_nocheck((x),(ptr),sizeof(*(ptr)))
+#define __put_user(x, ptr) \
+  __put_user_nocheck((__typeof__(*(ptr)))(x), (ptr), sizeof(*(ptr)))
+#define __get_user(x, ptr) \
+  __get_user_nocheck((x), (ptr), sizeof(*(ptr)))
   
 /*
  * The "lda %1, 2b-1b(%0)" bits are magic to get the assembler to
@@ -84,7 +84,7 @@
 
 extern void __get_user_unknown(void);
 
-#define __get_user_nocheck(x,ptr,size)				\
+#define __get_user_nocheck(x, ptr, size)			\
 ({								\
 	long __gu_err = 0;					\
 	unsigned long __gu_val;					\
@@ -96,16 +96,16 @@ extern void __get_user_unknown(void);
 	  case 8: __get_user_64(ptr); break;			\
 	  default: __get_user_unknown(); break;			\
 	}							\
-	(x) = (__typeof__(*(ptr))) __gu_val;			\
+	(x) = (__force __typeof__(*(ptr))) __gu_val;		\
 	__gu_err;						\
 })
 
-#define __get_user_check(x,ptr,size,segment)				\
+#define __get_user_check(x, ptr, size, segment)				\
 ({									\
 	long __gu_err = -EFAULT;					\
 	unsigned long __gu_val = 0;					\
 	const __typeof__(*(ptr)) __user *__gu_addr = (ptr);		\
-	if (__access_ok((unsigned long)__gu_addr,size,segment)) {	\
+	if (__access_ok((unsigned long)__gu_addr, size, segment)) {	\
 		__gu_err = 0;						\
 		switch (size) {						\
 		  case 1: __get_user_8(__gu_addr); break;		\
@@ -115,7 +115,7 @@ extern void __get_user_unknown(void);
 		  default: __get_user_unknown(); break;			\
 		}							\
 	}								\
-	(x) = (__typeof__(*(ptr))) __gu_val;				\
+	(x) = (__force __typeof__(*(ptr))) __gu_val;			\
 	__gu_err;							\
 })
 
@@ -201,31 +201,31 @@ struct __large_struct { unsigned long buf[100]; };
 
 extern void __put_user_unknown(void);
 
-#define __put_user_nocheck(x,ptr,size)				\
+#define __put_user_nocheck(x, ptr, size)			\
 ({								\
 	long __pu_err = 0;					\
 	__chk_user_ptr(ptr);					\
 	switch (size) {						\
-	  case 1: __put_user_8(x,ptr); break;			\
-	  case 2: __put_user_16(x,ptr); break;			\
-	  case 4: __put_user_32(x,ptr); break;			\
-	  case 8: __put_user_64(x,ptr); break;			\
+	  case 1: __put_user_8(x, ptr); break;			\
+	  case 2: __put_user_16(x, ptr); break;			\
+	  case 4: __put_user_32(x, ptr); break;			\
+	  case 8: __put_user_64(x, ptr); break;			\
 	  default: __put_user_unknown(); break;			\
 	}							\
 	__pu_err;						\
 })
 
-#define __put_user_check(x,ptr,size,segment)				\
+#define __put_user_check(x, ptr, size, segment)				\
 ({									\
 	long __pu_err = -EFAULT;					\
 	__typeof__(*(ptr)) __user *__pu_addr = (ptr);			\
-	if (__access_ok((unsigned long)__pu_addr,size,segment)) {	\
+	if (__access_ok((unsigned long)__pu_addr, size, segment)) {	\
 		__pu_err = 0;						\
 		switch (size) {						\
-		  case 1: __put_user_8(x,__pu_addr); break;		\
-		  case 2: __put_user_16(x,__pu_addr); break;		\
-		  case 4: __put_user_32(x,__pu_addr); break;		\
-		  case 8: __put_user_64(x,__pu_addr); break;		\
+		  case 1: __put_user_8(x, __pu_addr); break;		\
+		  case 2: __put_user_16(x, __pu_addr); break;		\
+		  case 4: __put_user_32(x, __pu_addr); break;		\
+		  case 8: __put_user_64(x, __pu_addr); break;		\
 		  default: __put_user_unknown(); break;			\
 		}							\
 	}								\
@@ -237,7 +237,7 @@ extern void __put_user_unknown(void);
  * instead of writing: this is because they do not write to
  * any memory gcc knows about, so there are no aliasing issues
  */
-#define __put_user_64(x,addr)					\
+#define __put_user_64(x, addr)					\
 __asm__ __volatile__("1: stq %r2,%1\n"				\
 	"2:\n"							\
 	".section __ex_table,\"a\"\n"				\
@@ -247,7 +247,7 @@ __asm__ __volatile__("1: stq %r2,%1\n"				\
 		: "=r"(__pu_err)				\
 		: "m" (__m(addr)), "rJ" (x), "0"(__pu_err))
 
-#define __put_user_32(x,addr)					\
+#define __put_user_32(x, addr)					\
 __asm__ __volatile__("1: stl %r2,%1\n"				\
 	"2:\n"							\
 	".section __ex_table,\"a\"\n"				\
@@ -260,7 +260,7 @@ __asm__ __volatile__("1: stl %r2,%1\n"				\
 #ifdef __alpha_bwx__
 /* Those lucky bastards with ev56 and later CPUs can do byte/word moves.  */
 
-#define __put_user_16(x,addr)					\
+#define __put_user_16(x, addr)					\
 __asm__ __volatile__("1: stw %r2,%1\n"				\
 	"2:\n"							\
 	".section __ex_table,\"a\"\n"				\
@@ -270,7 +270,7 @@ __asm__ __volatile__("1: stw %r2,%1\n"				\
 		: "=r"(__pu_err)				\
 		: "m"(__m(addr)), "rJ"(x), "0"(__pu_err))
 
-#define __put_user_8(x,addr)					\
+#define __put_user_8(x, addr)					\
 __asm__ __volatile__("1: stb %r2,%1\n"				\
 	"2:\n"							\
 	".section __ex_table,\"a\"\n"				\
@@ -283,7 +283,7 @@ __asm__ __volatile__("1: stb %r2,%1\n"				\
 /* Unfortunately, we can't get an unaligned access trap for the sub-word
    write, so we have to do a general unaligned operation.  */
 
-#define __put_user_16(x,addr)					\
+#define __put_user_16(x, addr)					\
 {								\
 	long __pu_tmp1, __pu_tmp2, __pu_tmp3, __pu_tmp4;	\
 	__asm__ __volatile__(					\
@@ -308,13 +308,13 @@ __asm__ __volatile__("1: stb %r2,%1\n"				\
 	"	.long 4b - .\n"					\
 	"	lda $31, 5b-4b(%0)\n"				\
 	".previous"						\
-		: "=r"(__pu_err), "=&r"(__pu_tmp1),		\
-		  "=&r"(__pu_tmp2), "=&r"(__pu_tmp3),		\
+		: "=r"(__pu_err), "=&r"(__pu_tmp1), 		\
+		  "=&r"(__pu_tmp2), "=&r"(__pu_tmp3), 		\
 		  "=&r"(__pu_tmp4)				\
 		: "r"(addr), "r"((unsigned long)(x)), "0"(__pu_err)); \
 }
 
-#define __put_user_8(x,addr)					\
+#define __put_user_8(x, addr)					\
 {								\
 	long __pu_tmp1, __pu_tmp2;				\
 	__asm__ __volatile__(					\
@@ -330,7 +330,7 @@ __asm__ __volatile__("1: stb %r2,%1\n"				\
 	"	.long 2b - .\n"					\
 	"	lda $31, 3b-2b(%0)\n"				\
 	".previous"						\
-		: "=r"(__pu_err),				\
+		: "=r"(__pu_err), 				\
 	  	  "=&r"(__pu_tmp1), "=&r"(__pu_tmp2)		\
 		: "r"((unsigned long)(x)), "r"(addr), "0"(__pu_err)); \
 }
@@ -366,7 +366,7 @@ __copy_tofrom_user_nocheck(void *to, const void *from, long len)
 		: "=r" (__cu_len), "=r" (__cu_from), "=r" (__cu_to)
 		: __module_address(__copy_user)
 		  "0" (__cu_len), "1" (__cu_from), "2" (__cu_to)
-		: "$1","$2","$3","$4","$5","$28","memory");
+		: "$1", "$2", "$3", "$4", "$5", "$28", "memory");
 
 	return __cu_len;
 }
@@ -379,15 +379,15 @@ __copy_tofrom_user(void *to, const void *from, long len, const void __user *vali
 	return len;
 }
 
-#define __copy_to_user(to,from,n)					\
+#define __copy_to_user(to, from, n)					\
 ({									\
 	__chk_user_ptr(to);						\
-	__copy_tofrom_user_nocheck((__force void *)(to),(from),(n));	\
+	__copy_tofrom_user_nocheck((__force void *)(to), (from), (n));	\
 })
-#define __copy_from_user(to,from,n)					\
+#define __copy_from_user(to, from, n)					\
 ({									\
 	__chk_user_ptr(from);						\
-	__copy_tofrom_user_nocheck((to),(__force void *)(from),(n));	\
+	__copy_tofrom_user_nocheck((to), (__force void *)(from), (n));	\
 })
 
 #define __copy_to_user_inatomic __copy_to_user
@@ -418,7 +418,7 @@ __clear_user(void __user *to, long len)
 		: "=r"(__cl_len), "=r"(__cl_to)
 		: __module_address(__do_clear_user)
 		  "0"(__cl_len), "1"(__cl_to)
-		: "$1","$2","$3","$4","$5","$28","memory");
+		: "$1", "$2", "$3", "$4", "$5", "$28", "memory");
 	return __cl_len;
 }
 

arch/arc/boot/dts/abilis_tb10x.dtsi

@@ -112,7 +112,7 @@
 			chan_allocation_order = <0>;
 			chan_priority = <1>;
 			block_size = <0x7ff>;
-			data_width = <2 0 0 0>;
+			data_width = <2>;
 			clocks = <&ahb_clk>;
 			clock-names = "hclk";
 		};

arch/arm/boot/dts/am335x-bone-common.dtsi

@@ -195,6 +195,7 @@
 
 &usb0 {
 	status = "okay";
+	dr_mode = "peripheral";
 };
 
 &usb1 {

arch/arm/boot/dts/am437x-idk-evm.dts

@@ -133,20 +133,6 @@
 		>;
 	};
 
-	i2c1_pins_default: i2c1_pins_default {
-		pinctrl-single,pins = <
-			0x15c (PIN_INPUT | SLEWCTRL_FAST | MUX_MODE2) /* spi0_cs0.i2c1_scl */
-			0x158 (PIN_INPUT | SLEWCTRL_FAST | MUX_MODE2) /* spi0_d1.i2c1_sda */
-		>;
-	};
-
-	i2c1_pins_sleep: i2c1_pins_sleep {
-		pinctrl-single,pins = <
-			0x15c (PIN_INPUT_PULLDOWN | MUX_MODE7) /* spi0_cs0.i2c1_scl */
-			0x158 (PIN_INPUT_PULLDOWN | MUX_MODE7) /* spi0_d1.i2c1_sda */
-		>;
-	};
-
 	mmc1_pins_default: pinmux_mmc1_pins_default {
 		pinctrl-single,pins = <
 			0x100 (PIN_INPUT | MUX_MODE0) /* mmc0_clk.mmc0_clk */
@@ -254,7 +240,7 @@
 	status = "okay";
 	pinctrl-names = "default", "sleep";
 	pinctrl-0 = <&i2c0_pins_default>;
-	pinctrl-1 = <&i2c0_pins_default>;
+	pinctrl-1 = <&i2c0_pins_sleep>;
 	clock-frequency = <400000>;
 
 	at24@50 {
@@ -262,17 +248,10 @@
 		pagesize = <64>;
 		reg = <0x50>;
 	};
-};
-
-&i2c1 {
-	status = "okay";
-	pinctrl-names = "default", "sleep";
-	pinctrl-0 = <&i2c1_pins_default>;
-	pinctrl-1 = <&i2c1_pins_default>;
-	clock-frequency = <400000>;
 
 	tps: tps62362@60 {
 		compatible = "ti,tps62362";
+		reg = <0x60>;
 		regulator-name = "VDD_MPU";
 		regulator-min-microvolt = <950000>;
 		regulator-max-microvolt = <1330000>;

arch/arm/boot/dts/am57xx-beagle-x15.dts

@@ -549,14 +549,6 @@
 	pinctrl-0 = <&usb1_pins>;
 };
 
-&omap_dwc3_1 {
-	extcon = <&extcon_usb1>;
-};
-
-&omap_dwc3_2 {
-	extcon = <&extcon_usb2>;
-};
-
 &usb2 {
 	dr_mode = "peripheral";
 };

arch/arm/boot/dts/bcm-cygnus.dtsi

@@ -70,6 +70,26 @@
 		};
 	};
 
+	i2c0: i2c@18008000 {
+		compatible = "brcm,cygnus-iproc-i2c", "brcm,iproc-i2c";
+		reg = <0x18008000 0x100>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		interrupts = <GIC_SPI 85 IRQ_TYPE_NONE>;
+		clock-frequency = <100000>;
+		status = "disabled";
+	};
+
+	i2c1: i2c@1800b000 {
+		compatible = "brcm,cygnus-iproc-i2c", "brcm,iproc-i2c";
+		reg = <0x1800b000 0x100>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		interrupts = <GIC_SPI 86 IRQ_TYPE_NONE>;
+		clock-frequency = <100000>;
+		status = "disabled";
+	};
+
 	uart0: serial@18020000 {
 		compatible = "snps,dw-apb-uart";
 		reg = <0x18020000 0x100>;

arch/arm/boot/dts/bcm63138.dtsi

@@ -66,8 +66,9 @@
 			reg = <0x1d000 0x1000>;
 			cache-unified;
 			cache-level = <2>;
-			cache-sets = <16>;
-			cache-size = <0x80000>;
+			cache-size = <524288>;
+			cache-sets = <1024>;
+			cache-line-size = <32>;
 			interrupts = <GIC_PPI 0 IRQ_TYPE_LEVEL_HIGH>;
 		};
 

arch/arm/boot/dts/dm8168-evm.dts

@@ -35,6 +35,18 @@
 			DM816X_IOPAD(0x0aac, PIN_INPUT | MUX_MODE0)	/* SPI_D1 */
 		>;
 	};
+
+	usb0_pins: pinmux_usb0_pins {
+		pinctrl-single,pins = <
+			DM816X_IOPAD(0x0d00, MUX_MODE0)			/* USB0_DRVVBUS */
+		>;
+	};
+
+	usb1_pins: pinmux_usb0_pins {
+		pinctrl-single,pins = <
+			DM816X_IOPAD(0x0d04, MUX_MODE0)			/* USB1_DRVVBUS */
+		>;
+	};
 };
 
 &i2c1 {
@@ -127,3 +139,16 @@
 &mmc1 {
 	vmmc-supply = <&vmmcsd_fixed>;
 };
+
+/* At least dm8168-evm rev c won't support multipoint, later may */
+&usb0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&usb0_pins>;
+	mentor,multipoint = <0>;
+};
+
+&usb1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&usb1_pins>;
+	mentor,multipoint = <0>;
+};

arch/arm/boot/dts/dm816x.dtsi

@@ -97,10 +97,31 @@
 
 			/* Device Configuration Registers */
 			scm_conf: syscon@600 {
-				compatible = "syscon";
+				compatible = "syscon", "simple-bus";
 				reg = <0x600 0x110>;
 				#address-cells = <1>;
 				#size-cells = <1>;
+				ranges = <0 0x600 0x110>;
+
+				usb_phy0: usb-phy@20 {
+					compatible = "ti,dm8168-usb-phy";
+					reg = <0x20 0x8>;
+					reg-names = "phy";
+					clocks = <&main_fapll 6>;
+					clock-names = "refclk";
+					#phy-cells = <0>;
+					syscon = <&scm_conf>;
+				};
+
+				usb_phy1: usb-phy@28 {
+					compatible = "ti,dm8168-usb-phy";
+					reg = <0x28 0x8>;
+					reg-names = "phy";
+					clocks = <&main_fapll 6>;
+					clock-names = "refclk";
+					#phy-cells = <0>;
+					syscon = <&scm_conf>;
+				};
 			};
 
 			scrm_clocks: clocks {
@@ -357,7 +378,10 @@
 				reg-names = "mc", "control";
 				interrupts = <18>;
 				interrupt-names = "mc";
-				dr_mode = "otg";
+				dr_mode = "host";
+				interface-type = <0>;
+				phys = <&usb_phy0>;
+				phy-names = "usb2-phy";
 				mentor,multipoint = <1>;
 				mentor,num-eps = <16>;
 				mentor,ram-bits = <12>;
@@ -366,13 +390,15 @@
 
 			usb1: usb@47401800 {
 				compatible = "ti,musb-am33xx";
-				status = "disabled";
 				reg = <0x47401c00 0x400
 				       0x47401800 0x200>;
 				reg-names = "mc", "control";
 				interrupts = <19>;
 				interrupt-names = "mc";
-				dr_mode = "otg";
+				dr_mode = "host";
+				interface-type = <0>;
+				phys = <&usb_phy1>;
+				phy-names = "usb2-phy";
 				mentor,multipoint = <1>;
 				mentor,num-eps = <16>;
 				mentor,ram-bits = <12>;

arch/arm/boot/dts/dra7-evm.dts

@@ -543,14 +543,6 @@
 	};
 };
 
-&omap_dwc3_1 {
-	extcon = <&extcon_usb1>;
-};
-
-&omap_dwc3_2 {
-	extcon = <&extcon_usb2>;
-};
-
 &usb1 {
 	dr_mode = "peripheral";
 	pinctrl-names = "default";

arch/arm/boot/dts/dra7.dtsi

@@ -249,8 +249,8 @@
 				     <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
 			#dma-cells = <1>;
-			#dma-channels = <32>;
-			#dma-requests = <127>;
+			dma-channels = <32>;
+			dma-requests = <127>;
 		};
 
 		gpio1: gpio@4ae10000 {
@@ -1090,8 +1090,8 @@
 				      <0x4A096800 0x40>; /* pll_ctrl */
 				reg-names = "phy_rx", "phy_tx", "pll_ctrl";
 				ctrl-module = <&omap_control_sata>;
-				clocks = <&sys_clkin1>;
-				clock-names = "sysclk";
+				clocks = <&sys_clkin1>, <&sata_ref_clk>;
+				clock-names = "sysclk", "refclk";
 				#phy-cells = <0>;
 			};
 

arch/arm/boot/dts/dra72-evm.dts

@@ -380,14 +380,6 @@
 	phy-supply = <&ldo4_reg>;
 };
 
-&omap_dwc3_1 {
-	extcon = <&extcon_usb1>;
-};
-
-&omap_dwc3_2 {
-	extcon = <&extcon_usb2>;
-};
-
 &usb1 {
 	dr_mode = "peripheral";
 	pinctrl-names = "default";

arch/arm/boot/dts/omap2.dtsi

@@ -87,8 +87,8 @@
 				     <14>,
 				     <15>;
 			#dma-cells = <1>;
-			#dma-channels = <32>;
-			#dma-requests = <64>;
+			dma-channels = <32>;
+			dma-requests = <64>;
 		};
 
 		i2c1: i2c@48070000 {

arch/arm/boot/dts/omap3-n900.dts

@@ -16,6 +16,13 @@
 	model = "Nokia N900";
 	compatible = "nokia,omap3-n900", "ti,omap3430", "ti,omap3";
 
+	aliases {
+		i2c0;
+		i2c1 = &i2c1;
+		i2c2 = &i2c2;
+		i2c3 = &i2c3;
+	};
+
 	cpus {
 		cpu@0 {
 			cpu0-supply = <&vcc>;
@@ -704,7 +711,7 @@
 		compatible = "smsc,lan91c94";
 		interrupt-parent = <&gpio2>;
 		interrupts = <22 IRQ_TYPE_LEVEL_HIGH>;	/* gpio54 */
-		reg = <1 0x300 0xf>;		/* 16 byte IO range at offset 0x300 */
+		reg = <1 0 0xf>;		/* 16 byte IO range */
 		bank-width = <2>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&ethernet_pins>;

arch/arm/boot/dts/omap3.dtsi

@@ -155,8 +155,8 @@
 				     <14>,
 				     <15>;
 			#dma-cells = <1>;
-			#dma-channels = <32>;
-			#dma-requests = <96>;
+			dma-channels = <32>;
+			dma-requests = <96>;
 		};
 
 		omap3_pmx_core: pinmux@48002030 {

arch/arm/boot/dts/omap4.dtsi

@@ -223,8 +223,8 @@
 				     <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>;
 			#dma-cells = <1>;
-			#dma-channels = <32>;
-			#dma-requests = <127>;
+			dma-channels = <32>;
+			dma-requests = <127>;
 		};
 
 		gpio1: gpio@4a310000 {

arch/arm/boot/dts/omap5.dtsi

@@ -238,8 +238,8 @@
 				     <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>;
 			#dma-cells = <1>;
-			#dma-channels = <32>;
-			#dma-requests = <127>;
+			dma-channels = <32>;
+			dma-requests = <127>;
 		};
 
 		gpio1: gpio@4ae10000 {
@@ -929,8 +929,8 @@
 				      <0x4A096800 0x40>; /* pll_ctrl */
 				reg-names = "phy_rx", "phy_tx", "pll_ctrl";
 				ctrl-module = <&omap_control_sata>;
-				clocks = <&sys_clkin>;
-				clock-names = "sysclk";
+				clocks = <&sys_clkin>, <&sata_ref_clk>;
+				clock-names = "sysclk", "refclk";
 				#phy-cells = <0>;
 			};
 		};

arch/arm/boot/dts/spear13xx.dtsi

@@ -117,7 +117,7 @@
 			chan_priority = <1>;
 			block_size = <0xfff>;
 			dma-masters = <2>;
-			data_width = <3 3 0 0>;
+			data_width = <3 3>;
 		};
 
 		dma@eb000000 {
@@ -133,7 +133,7 @@
 			chan_allocation_order = <1>;
 			chan_priority = <1>;
 			block_size = <0xfff>;
-			data_width = <3 3 0 0>;
+			data_width = <3 3>;
 		};
 
 		fsmc: flash@b0000000 {

arch/arm/boot/dts/sun4i-a10.dtsi

@@ -294,35 +294,43 @@
 		};
 
 		mmc0_clk: clk@01c20088 {
-			#clock-cells = <0>;
-			compatible = "allwinner,sun4i-a10-mod0-clk";
+			#clock-cells = <1>;
+			compatible = "allwinner,sun4i-a10-mmc-clk";
 			reg = <0x01c20088 0x4>;
 			clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
-			clock-output-names = "mmc0";
+			clock-output-names = "mmc0",
+					     "mmc0_output",
+					     "mmc0_sample";
 		};
 
 		mmc1_clk: clk@01c2008c {
-			#clock-cells = <0>;
-			compatible = "allwinner,sun4i-a10-mod0-clk";
+			#clock-cells = <1>;
+			compatible = "allwinner,sun4i-a10-mmc-clk";
 			reg = <0x01c2008c 0x4>;
 			clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
-			clock-output-names = "mmc1";
+			clock-output-names = "mmc1",
+					     "mmc1_output",
+					     "mmc1_sample";
 		};
 
 		mmc2_clk: clk@01c20090 {
-			#clock-cells = <0>;
-			compatible = "allwinner,sun4i-a10-mod0-clk";
+			#clock-cells = <1>;
+			compatible = "allwinner,sun4i-a10-mmc-clk";
 			reg = <0x01c20090 0x4>;
 			clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
-			clock-output-names = "mmc2";
+			clock-output-names = "mmc2",
+					     "mmc2_output",
+					     "mmc2_sample";
 		};
 
 		mmc3_clk: clk@01c20094 {
-			#clock-cells = <0>;
-			compatible = "allwinner,sun4i-a10-mod0-clk";
+			#clock-cells = <1>;
+			compatible = "allwinner,sun4i-a10-mmc-clk";
 			reg = <0x01c20094 0x4>;
 			clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
-			clock-output-names = "mmc3";
+			clock-output-names = "mmc3",
+					     "mmc3_output",
+					     "mmc3_sample";
 		};
 
 		ts_clk: clk@01c20098 {
@@ -468,8 +476,14 @@
 		mmc0: mmc@01c0f000 {
 			compatible = "allwinner,sun4i-a10-mmc";
 			reg = <0x01c0f000 0x1000>;
-			clocks = <&ahb_gates 8>, <&mmc0_clk>;
-			clock-names = "ahb", "mmc";
+			clocks = <&ahb_gates 8>,
+				 <&mmc0_clk 0>,
+				 <&mmc0_clk 1>,
+				 <&mmc0_clk 2>;
+			clock-names = "ahb",
+				      "mmc",
+				      "output",
+				      "sample";
 			interrupts = <32>;
 			status = "disabled";
 		};
@@ -477,8 +491,14 @@
 		mmc1: mmc@01c10000 {
 			compatible = "allwinner,sun4i-a10-mmc";
 			reg = <0x01c10000 0x1000>;
-			clocks = <&ahb_gates 9>, <&mmc1_clk>;
-			clock-names = "ahb", "mmc";
+			clocks = <&ahb_gates 9>,
+				 <&mmc1_clk 0>,
+				 <&mmc1_clk 1>,
+				 <&mmc1_clk 2>;
+			clock-names = "ahb",
+				      "mmc",
+				      "output",
+				      "sample";
 			interrupts = <33>;
 			status = "disabled";
 		};
@@ -486,8 +506,14 @@
 		mmc2: mmc@01c11000 {
 			compatible = "allwinner,sun4i-a10-mmc";
 			reg = <0x01c11000 0x1000>;
-			clocks = <&ahb_gates 10>, <&mmc2_clk>;
-			clock-names = "ahb", "mmc";
+			clocks = <&ahb_gates 10>,
+				 <&mmc2_clk 0>,
+				 <&mmc2_clk 1>,
+				 <&mmc2_clk 2>;
+			clock-names = "ahb",
+				      "mmc",
+				      "output",
+				      "sample";
 			interrupts = <34>;
 			status = "disabled";
 		};
@@ -495,8 +521,14 @@
 		mmc3: mmc@01c12000 {
 			compatible = "allwinner,sun4i-a10-mmc";
 			reg = <0x01c12000 0x1000>;
-			clocks = <&ahb_gates 11>, <&mmc3_clk>;
-			clock-names = "ahb", "mmc";
+			clocks = <&ahb_gates 11>,
+				 <&mmc3_clk 0>,
+				 <&mmc3_clk 1>,
+				 <&mmc3_clk 2>;
+			clock-names = "ahb",
+				      "mmc",
+				      "output",
+				      "sample";
 			interrupts = <35>;
 			status = "disabled";
 		};

arch/arm/boot/dts/sun5i-a10s.dtsi

@@ -218,27 +218,33 @@
 		};
 
 		mmc0_clk: clk@01c20088 {
-			#clock-cells = <0>;
-			compatible = "allwinner,sun4i-a10-mod0-clk";
+			#clock-cells = <1>;
+			compatible = "allwinner,sun4i-a10-mmc-clk";
 			reg = <0x01c20088 0x4>;
 			clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
-			clock-output-names = "mmc0";
+			clock-output-names = "mmc0",
+					     "mmc0_output",
+					     "mmc0_sample";
 		};
 
 		mmc1_clk: clk@01c2008c {
-			#clock-cells = <0>;
-			compatible = "allwinner,sun4i-a10-mod0-clk";
+			#clock-cells = <1>;
+			compatible = "allwinner,sun4i-a10-mmc-clk";
 			reg = <0x01c2008c 0x4>;
 			clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
-			clock-output-names = "mmc1";
+			clock-output-names = "mmc1",
+					     "mmc1_output",
+					     "mmc1_sample";
 		};
 
 		mmc2_clk: clk@01c20090 {
-			#clock-cells = <0>;
-			compatible = "allwinner,sun4i-a10-mod0-clk";
+			#clock-cells = <1>;
+			compatible = "allwinner,sun4i-a10-mmc-clk";
 			reg = <0x01c20090 0x4>;
 			clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
-			clock-output-names = "mmc2";
+			clock-output-names = "mmc2",
+					     "mmc2_output",
+					     "mmc2_sample";
 		};
 
 		ts_clk: clk@01c20098 {
@@ -368,8 +374,14 @@
 		mmc0: mmc@01c0f000 {
 			compatible = "allwinner,sun5i-a13-mmc";
 			reg = <0x01c0f000 0x1000>;
-			clocks = <&ahb_gates 8>, <&mmc0_clk>;
-			clock-names = "ahb", "mmc";
+			clocks = <&ahb_gates 8>,
+				 <&mmc0_clk 0>,
+				 <&mmc0_clk 1>,
+				 <&mmc0_clk 2>;
+			clock-names = "ahb",
+				      "mmc",
+				      "output",
+				      "sample";
 			interrupts = <32>;
 			status = "disabled";
 		};
@@ -377,8 +389,14 @@
 		mmc1: mmc@01c10000 {
 			compatible = "allwinner,sun5i-a13-mmc";
 			reg = <0x01c10000 0x1000>;
-			clocks = <&ahb_gates 9>, <&mmc1_clk>;
-			clock-names = "ahb", "mmc";
+			clocks = <&ahb_gates 9>,
+				 <&mmc1_clk 0>,
+				 <&mmc1_clk 1>,
+				 <&mmc1_clk 2>;
+			clock-names = "ahb",
+				      "mmc",
+				      "output",
+				      "sample";
 			interrupts = <33>;
 			status = "disabled";
 		};
@@ -386,8 +404,14 @@
 		mmc2: mmc@01c11000 {
 			compatible = "allwinner,sun5i-a13-mmc";
 			reg = <0x01c11000 0x1000>;
-			clocks = <&ahb_gates 10>, <&mmc2_clk>;
-			clock-names = "ahb", "mmc";
+			clocks = <&ahb_gates 10>,
+				 <&mmc2_clk 0>,
+				 <&mmc2_clk 1>,
+				 <&mmc2_clk 2>;
+			clock-names = "ahb",
+				      "mmc",
+				      "output",
+				      "sample";
 			interrupts = <34>;
 			status = "disabled";
 		};

arch/arm/boot/dts/sun5i-a13.dtsi

@@ -257,27 +257,33 @@
 		};
 
 		mmc0_clk: clk@01c20088 {
-			#clock-cells = <0>;
-			compatible = "allwinner,sun4i-a10-mod0-clk";
+			#clock-cells = <1>;
+			compatible = "allwinner,sun4i-a10-mmc-clk";
 			reg = <0x01c20088 0x4>;
 			clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
-			clock-output-names = "mmc0";
+			clock-output-names = "mmc0",
+					     "mmc0_output",
+					     "mmc0_sample";
 		};
 
 		mmc1_clk: clk@01c2008c {
-			#clock-cells = <0>;
-			compatible = "allwinner,sun4i-a10-mod0-clk";
+			#clock-cells = <1>;
+			compatible = "allwinner,sun4i-a10-mmc-clk";
 			reg = <0x01c2008c 0x4>;
 			clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
-			clock-output-names = "mmc1";
+			clock-output-names = "mmc1",
+					     "mmc1_output",
+					     "mmc1_sample";
 		};
 
 		mmc2_clk: clk@01c20090 {
-			#clock-cells = <0>;
-			compatible = "allwinner,sun4i-a10-mod0-clk";
+			#clock-cells = <1>;
+			compatible = "allwinner,sun4i-a10-mmc-clk";
 			reg = <0x01c20090 0x4>;
 			clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
-			clock-output-names = "mmc2";
+			clock-output-names = "mmc2",
+					     "mmc2_output",
+					     "mmc2_sample";
 		};
 
 		ts_clk: clk@01c20098 {
@@ -391,8 +397,14 @@
 		mmc0: mmc@01c0f000 {
 			compatible = "allwinner,sun5i-a13-mmc";
 			reg = <0x01c0f000 0x1000>;
-			clocks = <&ahb_gates 8>, <&mmc0_clk>;
-			clock-names = "ahb", "mmc";
+			clocks = <&ahb_gates 8>,
+				 <&mmc0_clk 0>,
+				 <&mmc0_clk 1>,
+				 <&mmc0_clk 2>;
+			clock-names = "ahb",
+				      "mmc",
+				      "output",
+				      "sample";
 			interrupts = <32>;
 			status = "disabled";
 		};
@@ -400,8 +412,14 @@
 		mmc2: mmc@01c11000 {
 			compatible = "allwinner,sun5i-a13-mmc";
 			reg = <0x01c11000 0x1000>;
-			clocks = <&ahb_gates 10>, <&mmc2_clk>;
-			clock-names = "ahb", "mmc";
+			clocks = <&ahb_gates 10>,
+				 <&mmc2_clk 0>,
+				 <&mmc2_clk 1>,
+				 <&mmc2_clk 2>;
+			clock-names = "ahb",
+				      "mmc",
+				      "output",
+				      "sample";
 			interrupts = <34>;
 			status = "disabled";
 		};

arch/arm/boot/dts/sun6i-a31.dtsi

@@ -190,19 +190,11 @@
 			clock-output-names = "axi";
 		};
 
-		ahb1_mux: ahb1_mux@01c20054 {
-			#clock-cells = <0>;
-			compatible = "allwinner,sun6i-a31-ahb1-mux-clk";
-			reg = <0x01c20054 0x4>;
-			clocks = <&osc32k>, <&osc24M>, <&axi>, <&pll6 0>;
-			clock-output-names = "ahb1_mux";
-		};
-
 		ahb1: ahb1@01c20054 {
 			#clock-cells = <0>;
-			compatible = "allwinner,sun4i-a10-ahb-clk";
+			compatible = "allwinner,sun6i-a31-ahb1-clk";
 			reg = <0x01c20054 0x4>;
-			clocks = <&ahb1_mux>;
+			clocks = <&osc32k>, <&osc24M>, <&axi>, <&pll6 0>;
 			clock-output-names = "ahb1";
 		};
 
@@ -265,35 +257,43 @@
 		};
 
 		mmc0_clk: clk@01c20088 {
-			#clock-cells = <0>;
-			compatible = "allwinner,sun4i-a10-mod0-clk";
+			#clock-cells = <1>;
+			compatible = "allwinner,sun4i-a10-mmc-clk";
 			reg = <0x01c20088 0x4>;
 			clocks = <&osc24M>, <&pll6 0>;
-			clock-output-names = "mmc0";
+			clock-output-names = "mmc0",
+					     "mmc0_output",
+					     "mmc0_sample";
 		};
 
 		mmc1_clk: clk@01c2008c {
-			#clock-cells = <0>;
-			compatible = "allwinner,sun4i-a10-mod0-clk";
+			#clock-cells = <1>;
+			compatible = "allwinner,sun4i-a10-mmc-clk";
 			reg = <0x01c2008c 0x4>;
 			clocks = <&osc24M>, <&pll6 0>;
-			clock-output-names = "mmc1";
+			clock-output-names = "mmc1",
+					     "mmc1_output",
+					     "mmc1_sample";
 		};
 
 		mmc2_clk: clk@01c20090 {
-			#clock-cells = <0>;
-			compatible = "allwinner,sun4i-a10-mod0-clk";
+			#clock-cells = <1>;
+			compatible = "allwinner,sun4i-a10-mmc-clk";
 			reg = <0x01c20090 0x4>;
 			clocks = <&osc24M>, <&pll6 0>;
-			clock-output-names = "mmc2";
+			clock-output-names = "mmc2",
+					     "mmc2_output",
+					     "mmc2_sample";
 		};
 
 		mmc3_clk: clk@01c20094 {
-			#clock-cells = <0>;
-			compatible = "allwinner,sun4i-a10-mod0-clk";
+			#clock-cells = <1>;
+			compatible = "allwinner,sun4i-a10-mmc-clk";
 			reg = <0x01c20094 0x4>;
 			clocks = <&osc24M>, <&pll6 0>;
-			clock-output-names = "mmc3";
+			clock-output-names = "mmc3",
+					     "mmc3_output",
+					     "mmc3_sample";
 		};
 
 		spi0_clk: clk@01c200a0 {
@@ -383,15 +383,21 @@
 			#dma-cells = <1>;
 
 			/* DMA controller requires AHB1 clocked from PLL6 */
-			assigned-clocks = <&ahb1_mux>;
+			assigned-clocks = <&ahb1>;
 			assigned-clock-parents = <&pll6 0>;
 		};
 
 		mmc0: mmc@01c0f000 {
 			compatible = "allwinner,sun5i-a13-mmc";
 			reg = <0x01c0f000 0x1000>;
-			clocks = <&ahb1_gates 8>, <&mmc0_clk>;
-			clock-names = "ahb", "mmc";
+			clocks = <&ahb1_gates 8>,
+				 <&mmc0_clk 0>,
+				 <&mmc0_clk 1>,
+				 <&mmc0_clk 2>;
+			clock-names = "ahb",
+				      "mmc",
+				      "output",
+				      "sample";
 			resets = <&ahb1_rst 8>;
 			reset-names = "ahb";
 			interrupts = <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>;
@@ -401,8 +407,14 @@
 		mmc1: mmc@01c10000 {
 			compatible = "allwinner,sun5i-a13-mmc";
 			reg = <0x01c10000 0x1000>;
-			clocks = <&ahb1_gates 9>, <&mmc1_clk>;
-			clock-names = "ahb", "mmc";
+			clocks = <&ahb1_gates 9>,
+				 <&mmc1_clk 0>,
+				 <&mmc1_clk 1>,
+				 <&mmc1_clk 2>;
+			clock-names = "ahb",
+				      "mmc",
+				      "output",
+				      "sample";
 			resets = <&ahb1_rst 9>;
 			reset-names = "ahb";
 			interrupts = <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>;
@@ -412,8 +424,14 @@
 		mmc2: mmc@01c11000 {
 			compatible = "allwinner,sun5i-a13-mmc";
 			reg = <0x01c11000 0x1000>;
-			clocks = <&ahb1_gates 10>, <&mmc2_clk>;
-			clock-names = "ahb", "mmc";
+			clocks = <&ahb1_gates 10>,
+				 <&mmc2_clk 0>,
+				 <&mmc2_clk 1>,
+				 <&mmc2_clk 2>;
+			clock-names = "ahb",
+				      "mmc",
+				      "output",
+				      "sample";
 			resets = <&ahb1_rst 10>;
 			reset-names = "ahb";
 			interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>;
@@ -423,8 +441,14 @@
 		mmc3: mmc@01c12000 {
 			compatible = "allwinner,sun5i-a13-mmc";
 			reg = <0x01c12000 0x1000>;
-			clocks = <&ahb1_gates 11>, <&mmc3_clk>;
-			clock-names = "ahb", "mmc";
+			clocks = <&ahb1_gates 11>,
+				 <&mmc3_clk 0>,
+				 <&mmc3_clk 1>,
+				 <&mmc3_clk 2>;
+			clock-names = "ahb",
+				      "mmc",
+				      "output",
+				      "sample";
 			resets = <&ahb1_rst 11>;
 			reset-names = "ahb";
 			interrupts = <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>;

arch/arm/boot/dts/sun7i-a20.dtsi

@@ -337,35 +337,43 @@
 		};
 
 		mmc0_clk: clk@01c20088 {
-			#clock-cells = <0>;
-			compatible = "allwinner,sun4i-a10-mod0-clk";
+			#clock-cells = <1>;
+			compatible = "allwinner,sun4i-a10-mmc-clk";
 			reg = <0x01c20088 0x4>;
 			clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
-			clock-output-names = "mmc0";
+			clock-output-names = "mmc0",
+					     "mmc0_output",
+					     "mmc0_sample";
 		};
 
 		mmc1_clk: clk@01c2008c {
-			#clock-cells = <0>;
-			compatible = "allwinner,sun4i-a10-mod0-clk";
+			#clock-cells = <1>;
+			compatible = "allwinner,sun4i-a10-mmc-clk";
 			reg = <0x01c2008c 0x4>;
 			clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
-			clock-output-names = "mmc1";
+			clock-output-names = "mmc1",
+					     "mmc1_output",
+					     "mmc1_sample";
 		};
 
 		mmc2_clk: clk@01c20090 {
-			#clock-cells = <0>;
-			compatible = "allwinner,sun4i-a10-mod0-clk";
+			#clock-cells = <1>;
+			compatible = "allwinner,sun4i-a10-mmc-clk";
 			reg = <0x01c20090 0x4>;
 			clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
-			clock-output-names = "mmc2";
+			clock-output-names = "mmc2",
+					     "mmc2_output",
+					     "mmc2_sample";
 		};
 
 		mmc3_clk: clk@01c20094 {
-			#clock-cells = <0>;
-			compatible = "allwinner,sun4i-a10-mod0-clk";
+			#clock-cells = <1>;
+			compatible = "allwinner,sun4i-a10-mmc-clk";
 			reg = <0x01c20094 0x4>;
 			clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
-			clock-output-names = "mmc3";
+			clock-output-names = "mmc3",
+					     "mmc3_output",
+					     "mmc3_sample";
 		};
 
 		ts_clk: clk@01c20098 {
@@ -583,8 +591,14 @@
 		mmc0: mmc@01c0f000 {
 			compatible = "allwinner,sun5i-a13-mmc";
 			reg = <0x01c0f000 0x1000>;
-			clocks = <&ahb_gates 8>, <&mmc0_clk>;
-			clock-names = "ahb", "mmc";
+			clocks = <&ahb_gates 8>,
+				 <&mmc0_clk 0>,
+				 <&mmc0_clk 1>,
+				 <&mmc0_clk 2>;
+			clock-names = "ahb",
+				      "mmc",
+				      "output",
+				      "sample";
 			interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
 			status = "disabled";
 		};
@@ -592,8 +606,14 @@
 		mmc1: mmc@01c10000 {
 			compatible = "allwinner,sun5i-a13-mmc";
 			reg = <0x01c10000 0x1000>;
-			clocks = <&ahb_gates 9>, <&mmc1_clk>;
-			clock-names = "ahb", "mmc";
+			clocks = <&ahb_gates 9>,
+				 <&mmc1_clk 0>,
+				 <&mmc1_clk 1>,
+				 <&mmc1_clk 2>;
+			clock-names = "ahb",
+				      "mmc",
+				      "output",
+				      "sample";
 			interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
 			status = "disabled";
 		};
@@ -601,8 +621,14 @@
 		mmc2: mmc@01c11000 {
 			compatible = "allwinner,sun5i-a13-mmc";
 			reg = <0x01c11000 0x1000>;
-			clocks = <&ahb_gates 10>, <&mmc2_clk>;
-			clock-names = "ahb", "mmc";
+			clocks = <&ahb_gates 10>,
+				 <&mmc2_clk 0>,
+				 <&mmc2_clk 1>,
+				 <&mmc2_clk 2>;
+			clock-names = "ahb",
+				      "mmc",
+				      "output",
+				      "sample";
 			interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
 			status = "disabled";
 		};
@@ -610,8 +636,14 @@
 		mmc3: mmc@01c12000 {
 			compatible = "allwinner,sun5i-a13-mmc";
 			reg = <0x01c12000 0x1000>;
-			clocks = <&ahb_gates 11>, <&mmc3_clk>;
-			clock-names = "ahb", "mmc";
+			clocks = <&ahb_gates 11>,
+				 <&mmc3_clk 0>,
+				 <&mmc3_clk 1>,
+				 <&mmc3_clk 2>;
+			clock-names = "ahb",
+				      "mmc",
+				      "output",
+				      "sample";
 			interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
 			status = "disabled";
 		};

arch/arm/boot/dts/sun8i-a23.dtsi

@@ -119,11 +119,19 @@
 		};
 
 		/* dummy clock until actually implemented */
-		pll6: pll6_clk {
+		pll5: pll5_clk {
 			#clock-cells = <0>;
 			compatible = "fixed-clock";
-			clock-frequency = <600000000>;
-			clock-output-names = "pll6";
+			clock-frequency = <0>;
+			clock-output-names = "pll5";
+		};
+
+		pll6: clk@01c20028 {
+			#clock-cells = <1>;
+			compatible = "allwinner,sun6i-a31-pll6-clk";
+			reg = <0x01c20028 0x4>;
+			clocks = <&osc24M>;
+			clock-output-names = "pll6", "pll6x2";
 		};
 
 		cpu: cpu_clk@01c20050 {
@@ -149,19 +157,11 @@
 			clock-output-names = "axi";
 		};
 
-		ahb1_mux: ahb1_mux_clk@01c20054 {
-			#clock-cells = <0>;
-			compatible = "allwinner,sun6i-a31-ahb1-mux-clk";
-			reg = <0x01c20054 0x4>;
-			clocks = <&osc32k>, <&osc24M>, <&axi>, <&pll6>;
-			clock-output-names = "ahb1_mux";
-		};
-
 		ahb1: ahb1_clk@01c20054 {
 			#clock-cells = <0>;
-			compatible = "allwinner,sun4i-a10-ahb-clk";
+			compatible = "allwinner,sun6i-a31-ahb1-clk";
 			reg = <0x01c20054 0x4>;
-			clocks = <&ahb1_mux>;
+			clocks = <&osc32k>, <&osc24M>, <&axi>, <&pll6 0>;
 			clock-output-names = "ahb1";
 		};
 
@@ -202,7 +202,7 @@
 			#clock-cells = <0>;
 			compatible = "allwinner,sun4i-a10-apb1-clk";
 			reg = <0x01c20058 0x4>;
-			clocks = <&osc32k>, <&osc24M>, <&pll6>, <&pll6>;
+			clocks = <&osc32k>, <&osc24M>, <&pll6 0>, <&pll6 0>;
 			clock-output-names = "apb2";
 		};
 
@@ -218,27 +218,41 @@
 		};
 
 		mmc0_clk: clk@01c20088 {
-			#clock-cells = <0>;
-			compatible = "allwinner,sun4i-a10-mod0-clk";
+			#clock-cells = <1>;
+			compatible = "allwinner,sun4i-a10-mmc-clk";
 			reg = <0x01c20088 0x4>;
-			clocks = <&osc24M>, <&pll6>;
-			clock-output-names = "mmc0";
+			clocks = <&osc24M>, <&pll6 0>;
+			clock-output-names = "mmc0",
+					     "mmc0_output",
+					     "mmc0_sample";
 		};
 
 		mmc1_clk: clk@01c2008c {
-			#clock-cells = <0>;
-			compatible = "allwinner,sun4i-a10-mod0-clk";
+			#clock-cells = <1>;
+			compatible = "allwinner,sun4i-a10-mmc-clk";
 			reg = <0x01c2008c 0x4>;
-			clocks = <&osc24M>, <&pll6>;
-			clock-output-names = "mmc1";
+			clocks = <&osc24M>, <&pll6 0>;
+			clock-output-names = "mmc1",
+					     "mmc1_output",
+					     "mmc1_sample";
 		};
 
 		mmc2_clk: clk@01c20090 {
-			#clock-cells = <0>;
-			compatible = "allwinner,sun4i-a10-mod0-clk";
+			#clock-cells = <1>;
+			compatible = "allwinner,sun4i-a10-mmc-clk";
 			reg = <0x01c20090 0x4>;
-			clocks = <&osc24M>, <&pll6>;
-			clock-output-names = "mmc2";
+			clocks = <&osc24M>, <&pll6 0>;
+			clock-output-names = "mmc2",
+					     "mmc2_output",
+					     "mmc2_sample";
+		};
+
+		mbus_clk: clk@01c2015c {
+			#clock-cells = <0>;
+			compatible = "allwinner,sun8i-a23-mbus-clk";
+			reg = <0x01c2015c 0x4>;
+			clocks = <&osc24M>, <&pll6 1>, <&pll5>;
+			clock-output-names = "mbus";
 		};
 	};
 
@@ -260,8 +274,14 @@
 		mmc0: mmc@01c0f000 {
 			compatible = "allwinner,sun5i-a13-mmc";
 			reg = <0x01c0f000 0x1000>;
-			clocks = <&ahb1_gates 8>, <&mmc0_clk>;
-			clock-names = "ahb", "mmc";
+			clocks = <&ahb1_gates 8>,
+				 <&mmc0_clk 0>,
+				 <&mmc0_clk 1>,
+				 <&mmc0_clk 2>;
+			clock-names = "ahb",
+				      "mmc",
+				      "output",
+				      "sample";
 			resets = <&ahb1_rst 8>;
 			reset-names = "ahb";
 			interrupts = <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>;
@@ -271,8 +291,14 @@
 		mmc1: mmc@01c10000 {
 			compatible = "allwinner,sun5i-a13-mmc";
 			reg = <0x01c10000 0x1000>;
-			clocks = <&ahb1_gates 9>, <&mmc1_clk>;
-			clock-names = "ahb", "mmc";
+			clocks = <&ahb1_gates 9>,
+				 <&mmc1_clk 0>,
+				 <&mmc1_clk 1>,
+				 <&mmc1_clk 2>;
+			clock-names = "ahb",
+				      "mmc",
+				      "output",
+				      "sample";
 			resets = <&ahb1_rst 9>;
 			reset-names = "ahb";
 			interrupts = <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>;
@@ -282,8 +308,14 @@
 		mmc2: mmc@01c11000 {
 			compatible = "allwinner,sun5i-a13-mmc";
 			reg = <0x01c11000 0x1000>;
-			clocks = <&ahb1_gates 10>, <&mmc2_clk>;
-			clock-names = "ahb", "mmc";
+			clocks = <&ahb1_gates 10>,
+				 <&mmc2_clk 0>,
+				 <&mmc2_clk 1>,
+				 <&mmc2_clk 2>;
+			clock-names = "ahb",
+				      "mmc",
+				      "output",
+				      "sample";
 			resets = <&ahb1_rst 10>;
 			reset-names = "ahb";
 			interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>;

arch/arm/configs/multi_v7_defconfig

@@ -62,6 +62,17 @@ CONFIG_MACH_SPEAR1340=y
 CONFIG_ARCH_STI=y
 CONFIG_ARCH_EXYNOS=y
 CONFIG_EXYNOS5420_MCPM=y
+CONFIG_ARCH_SHMOBILE_MULTI=y
+CONFIG_ARCH_EMEV2=y
+CONFIG_ARCH_R7S72100=y
+CONFIG_ARCH_R8A73A4=y
+CONFIG_ARCH_R8A7740=y
+CONFIG_ARCH_R8A7779=y
+CONFIG_ARCH_R8A7790=y
+CONFIG_ARCH_R8A7791=y
+CONFIG_ARCH_R8A7794=y
+CONFIG_ARCH_SH73A0=y
+CONFIG_MACH_MARZEN=y
 CONFIG_ARCH_SUNXI=y
 CONFIG_ARCH_SIRF=y
 CONFIG_ARCH_TEGRA=y
@@ -84,6 +95,8 @@ CONFIG_PCI_KEYSTONE=y
 CONFIG_PCI_MSI=y
 CONFIG_PCI_MVEBU=y
 CONFIG_PCI_TEGRA=y
+CONFIG_PCI_RCAR_GEN2=y
+CONFIG_PCI_RCAR_GEN2_PCIE=y
 CONFIG_PCIEPORTBUS=y
 CONFIG_SMP=y
 CONFIG_NR_CPUS=8
@@ -130,6 +143,7 @@ CONFIG_DEVTMPFS_MOUNT=y
 CONFIG_DMA_CMA=y
 CONFIG_CMA_SIZE_MBYTES=64
 CONFIG_OMAP_OCP2SCP=y
+CONFIG_SIMPLE_PM_BUS=y
 CONFIG_MTD=y
 CONFIG_MTD_CMDLINE_PARTS=y
 CONFIG_MTD_BLOCK=y
@@ -157,6 +171,7 @@ CONFIG_AHCI_SUNXI=y
 CONFIG_AHCI_TEGRA=y
 CONFIG_SATA_HIGHBANK=y
 CONFIG_SATA_MV=y
+CONFIG_SATA_RCAR=y
 CONFIG_NETDEVICES=y
 CONFIG_HIX5HD2_GMAC=y
 CONFIG_SUN4I_EMAC=y
@@ -167,14 +182,17 @@ CONFIG_MV643XX_ETH=y
 CONFIG_MVNETA=y
 CONFIG_KS8851=y
 CONFIG_R8169=y
+CONFIG_SH_ETH=y
 CONFIG_SMSC911X=y
 CONFIG_STMMAC_ETH=y
 CONFIG_TI_CPSW=y
 CONFIG_XILINX_EMACLITE=y
 CONFIG_AT803X_PHY=y
 CONFIG_MARVELL_PHY=y
+CONFIG_SMSC_PHY=y
 CONFIG_BROADCOM_PHY=y
 CONFIG_ICPLUS_PHY=y
+CONFIG_MICREL_PHY=y
 CONFIG_USB_PEGASUS=y
 CONFIG_USB_USBNET=y
 CONFIG_USB_NET_SMSC75XX=y
@@ -192,15 +210,18 @@ CONFIG_KEYBOARD_CROS_EC=y
 CONFIG_MOUSE_PS2_ELANTECH=y
 CONFIG_INPUT_TOUCHSCREEN=y
 CONFIG_TOUCHSCREEN_ATMEL_MXT=y
+CONFIG_TOUCHSCREEN_ST1232=m
 CONFIG_TOUCHSCREEN_STMPE=y
 CONFIG_TOUCHSCREEN_SUN4I=y
 CONFIG_INPUT_MISC=y
 CONFIG_INPUT_MPU3050=y
 CONFIG_INPUT_AXP20X_PEK=y
+CONFIG_INPUT_ADXL34X=m
 CONFIG_SERIO_AMBAKMI=y
 CONFIG_SERIAL_8250=y
 CONFIG_SERIAL_8250_CONSOLE=y
 CONFIG_SERIAL_8250_DW=y
+CONFIG_SERIAL_8250_EM=y
 CONFIG_SERIAL_8250_MT6577=y
 CONFIG_SERIAL_AMBA_PL011=y
 CONFIG_SERIAL_AMBA_PL011_CONSOLE=y
@@ -213,6 +234,9 @@ CONFIG_SERIAL_SIRFSOC_CONSOLE=y
 CONFIG_SERIAL_TEGRA=y
 CONFIG_SERIAL_IMX=y
 CONFIG_SERIAL_IMX_CONSOLE=y
+CONFIG_SERIAL_SH_SCI=y
+CONFIG_SERIAL_SH_SCI_NR_UARTS=20
+CONFIG_SERIAL_SH_SCI_CONSOLE=y
 CONFIG_SERIAL_MSM=y
 CONFIG_SERIAL_MSM_CONSOLE=y
 CONFIG_SERIAL_VT8500=y
@@ -233,19 +257,26 @@ CONFIG_I2C_MUX_PCA954x=y
 CONFIG_I2C_MUX_PINCTRL=y
 CONFIG_I2C_CADENCE=y
 CONFIG_I2C_DESIGNWARE_PLATFORM=y
+CONFIG_I2C_GPIO=m
 CONFIG_I2C_EXYNOS5=y
 CONFIG_I2C_MV64XXX=y
+CONFIG_I2C_RIIC=y
 CONFIG_I2C_S3C2410=y
+CONFIG_I2C_SH_MOBILE=y
 CONFIG_I2C_SIRF=y
-CONFIG_I2C_TEGRA=y
 CONFIG_I2C_ST=y
-CONFIG_SPI=y
+CONFIG_I2C_TEGRA=y
 CONFIG_I2C_XILINX=y
-CONFIG_SPI_DAVINCI=y
+CONFIG_I2C_RCAR=y
+CONFIG_SPI=y
 CONFIG_SPI_CADENCE=y
+CONFIG_SPI_DAVINCI=y
 CONFIG_SPI_OMAP24XX=y
 CONFIG_SPI_ORION=y
 CONFIG_SPI_PL022=y
+CONFIG_SPI_RSPI=y
+CONFIG_SPI_SH_MSIOF=m
+CONFIG_SPI_SH_HSPI=y
 CONFIG_SPI_SIRF=y
 CONFIG_SPI_SUN4I=y
 CONFIG_SPI_SUN6I=y
@@ -259,12 +290,15 @@ CONFIG_PINCTRL_PALMAS=y
 CONFIG_PINCTRL_APQ8084=y
 CONFIG_GPIO_SYSFS=y
 CONFIG_GPIO_GENERIC_PLATFORM=y
-CONFIG_GPIO_DWAPB=y
 CONFIG_GPIO_DAVINCI=y
+CONFIG_GPIO_DWAPB=y
+CONFIG_GPIO_EM=y
+CONFIG_GPIO_RCAR=y
 CONFIG_GPIO_XILINX=y
 CONFIG_GPIO_ZYNQ=y
 CONFIG_GPIO_PCA953X=y
 CONFIG_GPIO_PCA953X_IRQ=y
+CONFIG_GPIO_PCF857X=y
 CONFIG_GPIO_TWL4030=y
 CONFIG_GPIO_PALMAS=y
 CONFIG_GPIO_SYSCON=y
@@ -276,10 +310,12 @@ CONFIG_POWER_RESET_AS3722=y
 CONFIG_POWER_RESET_GPIO=y
 CONFIG_POWER_RESET_KEYSTONE=y
 CONFIG_POWER_RESET_SUN6I=y
+CONFIG_POWER_RESET_RMOBILE=y
 CONFIG_SENSORS_LM90=y
 CONFIG_SENSORS_LM95245=y
 CONFIG_THERMAL=y
 CONFIG_CPU_THERMAL=y
+CONFIG_RCAR_THERMAL=y
 CONFIG_ARMADA_THERMAL=y
 CONFIG_DAVINCI_WATCHDOG
 CONFIG_ST_THERMAL_SYSCFG=y
@@ -290,6 +326,7 @@ CONFIG_ARM_SP805_WATCHDOG=y
 CONFIG_ORION_WATCHDOG=y
 CONFIG_SUNXI_WATCHDOG=y
 CONFIG_MESON_WATCHDOG=y
+CONFIG_MFD_AS3711=y
 CONFIG_MFD_AS3722=y
 CONFIG_MFD_BCM590XX=y
 CONFIG_MFD_AXP20X=y
@@ -304,13 +341,16 @@ CONFIG_MFD_TPS65090=y
 CONFIG_MFD_TPS6586X=y
 CONFIG_MFD_TPS65910=y
 CONFIG_REGULATOR_AB8500=y
+CONFIG_REGULATOR_AS3711=y
 CONFIG_REGULATOR_AS3722=y
 CONFIG_REGULATOR_AXP20X=y
 CONFIG_REGULATOR_BCM590XX=y
+CONFIG_REGULATOR_DA9210=y
 CONFIG_REGULATOR_GPIO=y
 CONFIG_MFD_SYSCON=y
 CONFIG_POWER_RESET_SYSCON=y
 CONFIG_REGULATOR_MAX8907=y
+CONFIG_REGULATOR_MAX8973=y
 CONFIG_REGULATOR_MAX77686=y
 CONFIG_REGULATOR_PALMAS=y
 CONFIG_REGULATOR_S2MPS11=y
@@ -324,18 +364,32 @@ CONFIG_REGULATOR_TWL4030=y
 CONFIG_REGULATOR_VEXPRESS=y
 CONFIG_MEDIA_SUPPORT=y
 CONFIG_MEDIA_CAMERA_SUPPORT=y
+CONFIG_MEDIA_CONTROLLER=y
+CONFIG_VIDEO_V4L2_SUBDEV_API=y
 CONFIG_MEDIA_USB_SUPPORT=y
 CONFIG_USB_VIDEO_CLASS=y
 CONFIG_USB_GSPCA=y
+CONFIG_V4L_PLATFORM_DRIVERS=y
+CONFIG_SOC_CAMERA=m
+CONFIG_SOC_CAMERA_PLATFORM=m
+CONFIG_VIDEO_RCAR_VIN=m
+CONFIG_V4L_MEM2MEM_DRIVERS=y
+CONFIG_VIDEO_RENESAS_VSP1=m
+# CONFIG_MEDIA_SUBDRV_AUTOSELECT is not set
+CONFIG_VIDEO_ADV7180=m
 CONFIG_DRM=y
+CONFIG_DRM_RCAR_DU=m
 CONFIG_DRM_TEGRA=y
 CONFIG_DRM_PANEL_SIMPLE=y
 CONFIG_FB_ARMCLCD=y
 CONFIG_FB_WM8505=y
+CONFIG_FB_SH_MOBILE_LCDC=y
 CONFIG_FB_SIMPLE=y
+CONFIG_FB_SH_MOBILE_MERAM=y
 CONFIG_BACKLIGHT_LCD_SUPPORT=y
 CONFIG_BACKLIGHT_CLASS_DEVICE=y
 CONFIG_BACKLIGHT_PWM=y
+CONFIG_BACKLIGHT_AS3711=y
 CONFIG_FRAMEBUFFER_CONSOLE=y
 CONFIG_FRAMEBUFFER_CONSOLE_ROTATION=y
 CONFIG_SOUND=y
@@ -343,6 +397,8 @@ CONFIG_SND=y
 CONFIG_SND_DYNAMIC_MINORS=y
 CONFIG_SND_USB_AUDIO=y
 CONFIG_SND_SOC=y
+CONFIG_SND_SOC_SH4_FSI=m
+CONFIG_SND_SOC_RCAR=m
 CONFIG_SND_SOC_TEGRA=y
 CONFIG_SND_SOC_TEGRA_RT5640=y
 CONFIG_SND_SOC_TEGRA_WM8753=y
@@ -350,6 +406,8 @@ CONFIG_SND_SOC_TEGRA_WM8903=y
 CONFIG_SND_SOC_TEGRA_TRIMSLICE=y
 CONFIG_SND_SOC_TEGRA_ALC5632=y
 CONFIG_SND_SOC_TEGRA_MAX98090=y
+CONFIG_SND_SOC_AK4642=m
+CONFIG_SND_SOC_WM8978=m
 CONFIG_USB=y
 CONFIG_USB_XHCI_HCD=y
 CONFIG_USB_XHCI_MVEBU=y
@@ -362,6 +420,8 @@ CONFIG_USB_ISP1760_HCD=y
 CONFIG_USB_OHCI_HCD=y
 CONFIG_USB_OHCI_HCD_STI=y
 CONFIG_USB_OHCI_HCD_PLATFORM=y
+CONFIG_USB_R8A66597_HCD=m
+CONFIG_USB_RENESAS_USBHS=m
 CONFIG_USB_STORAGE=y
 CONFIG_USB_DWC3=y
 CONFIG_USB_CHIPIDEA=y
@@ -374,6 +434,10 @@ CONFIG_SAMSUNG_USB3PHY=y
 CONFIG_USB_GPIO_VBUS=y
 CONFIG_USB_ISP1301=y
 CONFIG_USB_MXS_PHY=y
+CONFIG_USB_RCAR_PHY=m
+CONFIG_USB_RCAR_GEN2_PHY=m
+CONFIG_USB_GADGET=y
+CONFIG_USB_RENESAS_USBHS_UDC=m
 CONFIG_MMC=y
 CONFIG_MMC_BLOCK_MINORS=16
 CONFIG_MMC_ARMMMCI=y
@@ -392,12 +456,14 @@ CONFIG_MMC_SDHCI_ST=y
 CONFIG_MMC_OMAP=y
 CONFIG_MMC_OMAP_HS=y
 CONFIG_MMC_MVSDIO=y
-CONFIG_MMC_SUNXI=y
+CONFIG_MMC_SDHI=y
 CONFIG_MMC_DW=y
 CONFIG_MMC_DW_IDMAC=y
 CONFIG_MMC_DW_PLTFM=y
 CONFIG_MMC_DW_EXYNOS=y
 CONFIG_MMC_DW_ROCKCHIP=y
+CONFIG_MMC_SH_MMCIF=y
+CONFIG_MMC_SUNXI=y
 CONFIG_NEW_LEDS=y
 CONFIG_LEDS_CLASS=y
 CONFIG_LEDS_GPIO=y
@@ -421,10 +487,12 @@ CONFIG_RTC_DRV_AS3722=y
 CONFIG_RTC_DRV_DS1307=y
 CONFIG_RTC_DRV_MAX8907=y
 CONFIG_RTC_DRV_MAX77686=y
+CONFIG_RTC_DRV_RS5C372=m
 CONFIG_RTC_DRV_PALMAS=y
 CONFIG_RTC_DRV_TWL4030=y
 CONFIG_RTC_DRV_TPS6586X=y
 CONFIG_RTC_DRV_TPS65910=y
+CONFIG_RTC_DRV_S35390A=m
 CONFIG_RTC_DRV_EM3027=y
 CONFIG_RTC_DRV_PL031=y
 CONFIG_RTC_DRV_VT8500=y
@@ -436,6 +504,9 @@ CONFIG_DMADEVICES=y
 CONFIG_DW_DMAC=y
 CONFIG_MV_XOR=y
 CONFIG_TEGRA20_APB_DMA=y
+CONFIG_SH_DMAE=y
+CONFIG_RCAR_AUDMAC_PP=m
+CONFIG_RCAR_DMAC=y
 CONFIG_STE_DMA40=y
 CONFIG_SIRF_DMA=y
 CONFIG_TI_EDMA=y
@@ -468,6 +539,7 @@ CONFIG_IIO=y
 CONFIG_XILINX_XADC=y
 CONFIG_AK8975=y
 CONFIG_PWM=y
+CONFIG_PWM_RENESAS_TPU=y
 CONFIG_PWM_TEGRA=y
 CONFIG_PWM_VT8500=y
 CONFIG_PHY_HIX5HD2_SATA=y

arch/arm/configs/omap2plus_defconfig

@@ -114,6 +114,7 @@ CONFIG_MTD_PHYSMAP_OF=y
 CONFIG_MTD_NAND=y
 CONFIG_MTD_NAND_ECC_BCH=y
 CONFIG_MTD_NAND_OMAP2=y
+CONFIG_MTD_NAND_OMAP_BCH=y
 CONFIG_MTD_ONENAND=y
 CONFIG_MTD_ONENAND_VERIFY_WRITE=y
 CONFIG_MTD_ONENAND_OMAP2=y
@@ -248,6 +249,7 @@ CONFIG_TWL6040_CORE=y
 CONFIG_REGULATOR_PALMAS=y
 CONFIG_REGULATOR_PBIAS=y
 CONFIG_REGULATOR_TI_ABB=y
+CONFIG_REGULATOR_TPS62360=m
 CONFIG_REGULATOR_TPS65023=y
 CONFIG_REGULATOR_TPS6507X=y
 CONFIG_REGULATOR_TPS65217=y
@@ -374,7 +376,7 @@ CONFIG_PWM_TIEHRPWM=m
 CONFIG_PWM_TWL=m
 CONFIG_PWM_TWL_LED=m
 CONFIG_OMAP_USB2=m
-CONFIG_TI_PIPE3=m
+CONFIG_TI_PIPE3=y
 CONFIG_EXT2_FS=y
 CONFIG_EXT3_FS=y
 # CONFIG_EXT3_FS_XATTR is not set

arch/arm/include/asm/uaccess.h

@@ -73,7 +73,7 @@ static inline void set_fs(mm_segment_t fs)
 	modify_domain(DOMAIN_KERNEL, fs ? DOMAIN_CLIENT : DOMAIN_MANAGER);
 }
 
-#define segment_eq(a,b)	((a) == (b))
+#define segment_eq(a, b)	((a) == (b))
 
 #define __addr_ok(addr) ({ \
 	unsigned long flag; \
@@ -84,7 +84,7 @@ static inline void set_fs(mm_segment_t fs)
 	(flag == 0); })
 
 /* We use 33-bit arithmetic here... */
-#define __range_ok(addr,size) ({ \
+#define __range_ok(addr, size) ({ \
 	unsigned long flag, roksum; \
 	__chk_user_ptr(addr);	\
 	__asm__("adds %1, %2, %3; sbcccs %1, %1, %0; movcc %0, #0" \
@@ -123,7 +123,7 @@ extern int __get_user_64t_4(void *);
 #define __GUP_CLOBBER_32t_8 "lr", "cc"
 #define __GUP_CLOBBER_8	"lr", "cc"
 
-#define __get_user_x(__r2,__p,__e,__l,__s)				\
+#define __get_user_x(__r2, __p, __e, __l, __s)				\
 	   __asm__ __volatile__ (					\
 		__asmeq("%0", "r0") __asmeq("%1", "r2")			\
 		__asmeq("%3", "r1")					\
@@ -134,7 +134,7 @@ extern int __get_user_64t_4(void *);
 
 /* narrowing a double-word get into a single 32bit word register: */
 #ifdef __ARMEB__
-#define __get_user_x_32t(__r2, __p, __e, __l, __s)				\
+#define __get_user_x_32t(__r2, __p, __e, __l, __s)			\
 	__get_user_x(__r2, __p, __e, __l, 32t_8)
 #else
 #define __get_user_x_32t __get_user_x
@@ -158,7 +158,7 @@ extern int __get_user_64t_4(void *);
 #endif
 
 
-#define __get_user_check(x,p)							\
+#define __get_user_check(x, p)						\
 	({								\
 		unsigned long __limit = current_thread_info()->addr_limit - 1; \
 		register const typeof(*(p)) __user *__p asm("r0") = (p);\
@@ -196,10 +196,10 @@ extern int __get_user_64t_4(void *);
 		__e;							\
 	})
 
-#define get_user(x,p)							\
+#define get_user(x, p)							\
 	({								\
 		might_fault();						\
-		__get_user_check(x,p);					\
+		__get_user_check(x, p);					\
 	 })
 
 extern int __put_user_1(void *, unsigned int);
@@ -207,7 +207,7 @@ extern int __put_user_2(void *, unsigned int);
 extern int __put_user_4(void *, unsigned int);
 extern int __put_user_8(void *, unsigned long long);
 
-#define __put_user_x(__r2,__p,__e,__l,__s)				\
+#define __put_user_x(__r2, __p, __e, __l, __s)				\
 	   __asm__ __volatile__ (					\
 		__asmeq("%0", "r0") __asmeq("%2", "r2")			\
 		__asmeq("%3", "r1")					\
@@ -216,7 +216,7 @@ extern int __put_user_8(void *, unsigned long long);
 		: "0" (__p), "r" (__r2), "r" (__l)			\
 		: "ip", "lr", "cc")
 
-#define __put_user_check(x,p)							\
+#define __put_user_check(x, p)						\
 	({								\
 		unsigned long __limit = current_thread_info()->addr_limit - 1; \
 		const typeof(*(p)) __user *__tmp_p = (p);		\
@@ -242,10 +242,10 @@ extern int __put_user_8(void *, unsigned long long);
 		__e;							\
 	})
 
-#define put_user(x,p)							\
+#define put_user(x, p)							\
 	({								\
 		might_fault();						\
-		__put_user_check(x,p);					\
+		__put_user_check(x, p);					\
 	 })
 
 #else /* CONFIG_MMU */
@@ -255,21 +255,21 @@ extern int __put_user_8(void *, unsigned long long);
  */
 #define USER_DS			KERNEL_DS
 
-#define segment_eq(a,b)		(1)
-#define __addr_ok(addr)		((void)(addr),1)
-#define __range_ok(addr,size)	((void)(addr),0)
+#define segment_eq(a, b)		(1)
+#define __addr_ok(addr)		((void)(addr), 1)
+#define __range_ok(addr, size)	((void)(addr), 0)
 #define get_fs()		(KERNEL_DS)
 
 static inline void set_fs(mm_segment_t fs)
 {
 }
 
-#define get_user(x,p)	__get_user(x,p)
-#define put_user(x,p)	__put_user(x,p)
+#define get_user(x, p)	__get_user(x, p)
+#define put_user(x, p)	__put_user(x, p)
 
 #endif /* CONFIG_MMU */
 
-#define access_ok(type,addr,size)	(__range_ok(addr,size) == 0)
+#define access_ok(type, addr, size)	(__range_ok(addr, size) == 0)
 
 #define user_addr_max() \
 	(segment_eq(get_fs(), KERNEL_DS) ? ~0UL : get_fs())
@@ -283,35 +283,35 @@ static inline void set_fs(mm_segment_t fs)
  * error occurs, and leave it unchanged on success.  Note that these
  * versions are void (ie, don't return a value as such).
  */
-#define __get_user(x,ptr)						\
+#define __get_user(x, ptr)						\
 ({									\
 	long __gu_err = 0;						\
-	__get_user_err((x),(ptr),__gu_err);				\
+	__get_user_err((x), (ptr), __gu_err);				\
 	__gu_err;							\
 })
 
-#define __get_user_error(x,ptr,err)					\
+#define __get_user_error(x, ptr, err)					\
 ({									\
-	__get_user_err((x),(ptr),err);					\
+	__get_user_err((x), (ptr), err);				\
 	(void) 0;							\
 })
 
-#define __get_user_err(x,ptr,err)					\
+#define __get_user_err(x, ptr, err)					\
 do {									\
 	unsigned long __gu_addr = (unsigned long)(ptr);			\
 	unsigned long __gu_val;						\
 	__chk_user_ptr(ptr);						\
 	might_fault();							\
 	switch (sizeof(*(ptr))) {					\
-	case 1:	__get_user_asm_byte(__gu_val,__gu_addr,err);	break;	\
-	case 2:	__get_user_asm_half(__gu_val,__gu_addr,err);	break;	\
-	case 4:	__get_user_asm_word(__gu_val,__gu_addr,err);	break;	\
+	case 1:	__get_user_asm_byte(__gu_val, __gu_addr, err);	break;	\
+	case 2:	__get_user_asm_half(__gu_val, __gu_addr, err);	break;	\
+	case 4:	__get_user_asm_word(__gu_val, __gu_addr, err);	break;	\
 	default: (__gu_val) = __get_user_bad();				\
 	}								\
 	(x) = (__typeof__(*(ptr)))__gu_val;				\
 } while (0)
 
-#define __get_user_asm_byte(x,addr,err)				\
+#define __get_user_asm_byte(x, addr, err)			\
 	__asm__ __volatile__(					\
 	"1:	" TUSER(ldrb) "	%1,[%2],#0\n"			\
 	"2:\n"							\
@@ -330,7 +330,7 @@ do {									\
 	: "cc")
 
 #ifndef __ARMEB__
-#define __get_user_asm_half(x,__gu_addr,err)			\
+#define __get_user_asm_half(x, __gu_addr, err)			\
 ({								\
 	unsigned long __b1, __b2;				\
 	__get_user_asm_byte(__b1, __gu_addr, err);		\
@@ -338,7 +338,7 @@ do {									\
 	(x) = __b1 | (__b2 << 8);				\
 })
 #else
-#define __get_user_asm_half(x,__gu_addr,err)			\
+#define __get_user_asm_half(x, __gu_addr, err)			\
 ({								\
 	unsigned long __b1, __b2;				\
 	__get_user_asm_byte(__b1, __gu_addr, err);		\
@@ -347,7 +347,7 @@ do {									\
 })
 #endif
 
-#define __get_user_asm_word(x,addr,err)				\
+#define __get_user_asm_word(x, addr, err)			\
 	__asm__ __volatile__(					\
 	"1:	" TUSER(ldr) "	%1,[%2],#0\n"			\
 	"2:\n"							\
@@ -365,35 +365,35 @@ do {									\
 	: "r" (addr), "i" (-EFAULT)				\
 	: "cc")
 
-#define __put_user(x,ptr)						\
+#define __put_user(x, ptr)						\
 ({									\
 	long __pu_err = 0;						\
-	__put_user_err((x),(ptr),__pu_err);				\
+	__put_user_err((x), (ptr), __pu_err);				\
 	__pu_err;							\
 })
 
-#define __put_user_error(x,ptr,err)					\
+#define __put_user_error(x, ptr, err)					\
 ({									\
-	__put_user_err((x),(ptr),err);					\
+	__put_user_err((x), (ptr), err);				\
 	(void) 0;							\
 })
 
-#define __put_user_err(x,ptr,err)					\
+#define __put_user_err(x, ptr, err)					\
 do {									\
 	unsigned long __pu_addr = (unsigned long)(ptr);			\
 	__typeof__(*(ptr)) __pu_val = (x);				\
 	__chk_user_ptr(ptr);						\
 	might_fault();							\
 	switch (sizeof(*(ptr))) {					\
-	case 1: __put_user_asm_byte(__pu_val,__pu_addr,err);	break;	\
-	case 2: __put_user_asm_half(__pu_val,__pu_addr,err);	break;	\
-	case 4: __put_user_asm_word(__pu_val,__pu_addr,err);	break;	\
-	case 8:	__put_user_asm_dword(__pu_val,__pu_addr,err);	break;	\
+	case 1: __put_user_asm_byte(__pu_val, __pu_addr, err);	break;	\
+	case 2: __put_user_asm_half(__pu_val, __pu_addr, err);	break;	\
+	case 4: __put_user_asm_word(__pu_val, __pu_addr, err);	break;	\
+	case 8:	__put_user_asm_dword(__pu_val, __pu_addr, err);	break;	\
 	default: __put_user_bad();					\
 	}								\
 } while (0)
 
-#define __put_user_asm_byte(x,__pu_addr,err)			\
+#define __put_user_asm_byte(x, __pu_addr, err)			\
 	__asm__ __volatile__(					\
 	"1:	" TUSER(strb) "	%1,[%2],#0\n"			\
 	"2:\n"							\
@@ -411,22 +411,22 @@ do {									\
 	: "cc")
 
 #ifndef __ARMEB__
-#define __put_user_asm_half(x,__pu_addr,err)			\
+#define __put_user_asm_half(x, __pu_addr, err)			\
 ({								\
-	unsigned long __temp = (unsigned long)(x);		\
+	unsigned long __temp = (__force unsigned long)(x);	\
 	__put_user_asm_byte(__temp, __pu_addr, err);		\
 	__put_user_asm_byte(__temp >> 8, __pu_addr + 1, err);	\
 })
 #else
-#define __put_user_asm_half(x,__pu_addr,err)			\
+#define __put_user_asm_half(x, __pu_addr, err)			\
 ({								\
-	unsigned long __temp = (unsigned long)(x);		\
+	unsigned long __temp = (__force unsigned long)(x);	\
 	__put_user_asm_byte(__temp >> 8, __pu_addr, err);	\
 	__put_user_asm_byte(__temp, __pu_addr + 1, err);	\
 })
 #endif
 
-#define __put_user_asm_word(x,__pu_addr,err)			\
+#define __put_user_asm_word(x, __pu_addr, err)			\
 	__asm__ __volatile__(					\
 	"1:	" TUSER(str) "	%1,[%2],#0\n"			\
 	"2:\n"							\
@@ -451,7 +451,7 @@ do {									\
 #define	__reg_oper1	"%R2"
 #endif
 
-#define __put_user_asm_dword(x,__pu_addr,err)			\
+#define __put_user_asm_dword(x, __pu_addr, err)			\
 	__asm__ __volatile__(					\
  ARM(	"1:	" TUSER(str) "	" __reg_oper1 ", [%1], #4\n"	) \
  ARM(	"2:	" TUSER(str) "	" __reg_oper0 ", [%1]\n"	) \
@@ -480,9 +480,9 @@ extern unsigned long __must_check __copy_to_user_std(void __user *to, const void
 extern unsigned long __must_check __clear_user(void __user *addr, unsigned long n);
 extern unsigned long __must_check __clear_user_std(void __user *addr, unsigned long n);
 #else
-#define __copy_from_user(to,from,n)	(memcpy(to, (void __force *)from, n), 0)
-#define __copy_to_user(to,from,n)	(memcpy((void __force *)to, from, n), 0)
-#define __clear_user(addr,n)		(memset((void __force *)addr, 0, n), 0)
+#define __copy_from_user(to, from, n)	(memcpy(to, (void __force *)from, n), 0)
+#define __copy_to_user(to, from, n)	(memcpy((void __force *)to, from, n), 0)
+#define __clear_user(addr, n)		(memset((void __force *)addr, 0, n), 0)
 #endif
 
 static inline unsigned long __must_check copy_from_user(void *to, const void __user *from, unsigned long n)

arch/arm/kernel/perf_event_cpu.c

@@ -231,7 +231,7 @@ static void cpu_pmu_destroy(struct arm_pmu *cpu_pmu)
 /*
  * PMU platform driver and devicetree bindings.
  */
-static struct of_device_id cpu_pmu_of_device_ids[] = {
+static const struct of_device_id cpu_pmu_of_device_ids[] = {
 	{.compatible = "arm,cortex-a17-pmu",	.data = armv7_a17_pmu_init},
 	{.compatible = "arm,cortex-a15-pmu",	.data = armv7_a15_pmu_init},
 	{.compatible = "arm,cortex-a12-pmu",	.data = armv7_a12_pmu_init},

arch/arm/mach-asm9260/Kconfig

@@ -2,5 +2,7 @@ config MACH_ASM9260
 	bool "Alphascale ASM9260"
 	depends on ARCH_MULTI_V5
 	select CPU_ARM926T
+	select ASM9260_TIMER
+	select GENERIC_CLOCKEVENTS
 	help
 	  Support for Alphascale ASM9260 based platform.

arch/arm/mach-at91/Kconfig

@@ -64,7 +64,6 @@ config SOC_SAMA5D4
 	select SOC_SAMA5
 	select CLKSRC_MMIO
 	select CACHE_L2X0
-	select CACHE_PL310
 	select HAVE_FB_ATMEL
 	select HAVE_AT91_UTMI
 	select HAVE_AT91_SMD

arch/arm/mach-at91/at91rm9200_time.c

@@ -183,7 +183,7 @@ static struct clock_event_device clkevt = {
 void __iomem *at91_st_base;
 EXPORT_SYMBOL_GPL(at91_st_base);
 
-static struct of_device_id at91rm9200_st_timer_ids[] = {
+static const struct of_device_id at91rm9200_st_timer_ids[] = {
 	{ .compatible = "atmel,at91rm9200-st" },
 	{ /* sentinel */ }
 };

arch/arm/mach-at91/generic.h

@@ -35,10 +35,10 @@ extern void __init at91sam9260_pm_init(void);
 extern void __init at91sam9g45_pm_init(void);
 extern void __init at91sam9x5_pm_init(void);
 #else
-void __init at91rm9200_pm_init(void) { }
-void __init at91sam9260_pm_init(void) { }
-void __init at91sam9g45_pm_init(void) { }
-void __init at91sam9x5_pm_init(void) { }
+static inline void __init at91rm9200_pm_init(void) { }
+static inline void __init at91sam9260_pm_init(void) { }
+static inline void __init at91sam9g45_pm_init(void) { }
+static inline void __init at91sam9x5_pm_init(void) { }
 #endif
 
 #endif /* _AT91_GENERIC_H */

arch/arm/mach-at91/pm.c

@@ -226,7 +226,7 @@ void at91_pm_set_standby(void (*at91_standby)(void))
 	}
 }
 
-static struct of_device_id ramc_ids[] = {
+static const struct of_device_id ramc_ids[] __initconst = {
 	{ .compatible = "atmel,at91rm9200-sdramc", .data = at91rm9200_standby },
 	{ .compatible = "atmel,at91sam9260-sdramc", .data = at91sam9_sdram_standby },
 	{ .compatible = "atmel,at91sam9g45-ddramc", .data = at91_ddr_standby },
@@ -234,7 +234,7 @@ static struct of_device_id ramc_ids[] = {
 	{ /*sentinel*/ }
 };
 
-static void at91_dt_ramc(void)
+static __init void at91_dt_ramc(void)
 {
 	struct device_node *np;
 	const struct of_device_id *of_id;

arch/arm/mach-axxia/axxia.c

@@ -16,7 +16,7 @@
 #include <linux/init.h>
 #include <asm/mach/arch.h>
 
-static const char *axxia_dt_match[] __initconst = {
+static const char *const axxia_dt_match[] __initconst = {
 	"lsi,axm5516",
 	"lsi,axm5516-sim",
 	"lsi,axm5516-emu",

arch/arm/mach-bcm/Kconfig

@@ -68,7 +68,7 @@ config ARCH_BCM_MOBILE
 	  This enables support for systems based on Broadcom mobile SoCs.
 
 config ARCH_BCM_281XX
-	bool "Broadcom BCM281XX SoC family"
+	bool "Broadcom BCM281XX SoC family" if ARCH_MULTI_V7
 	select ARCH_BCM_MOBILE
 	select HAVE_SMP
 	help
@@ -77,7 +77,7 @@ config ARCH_BCM_281XX
 	  variants.
 
 config ARCH_BCM_21664
-	bool "Broadcom BCM21664 SoC family"
+	bool "Broadcom BCM21664 SoC family" if ARCH_MULTI_V7
 	select ARCH_BCM_MOBILE
 	select HAVE_SMP
 	help

arch/arm/mach-bcm/brcmstb.c

@@ -17,7 +17,7 @@
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 
-static const char *brcmstb_match[] __initconst = {
+static const char *const brcmstb_match[] __initconst = {
 	"brcm,bcm7445",
 	"brcm,brcmstb",
 	NULL

arch/arm/mach-davinci/Kconfig

@@ -32,12 +32,14 @@ config ARCH_DAVINCI_DM646x
 
 config ARCH_DAVINCI_DA830
 	bool "DA830/OMAP-L137/AM17x based system"
+	depends on !ARCH_DAVINCI_DMx || AUTO_ZRELADDR
 	select ARCH_DAVINCI_DA8XX
 	select CPU_DCACHE_WRITETHROUGH # needed on silicon revs 1.0, 1.1
 	select CP_INTC
 
 config ARCH_DAVINCI_DA850
 	bool "DA850/OMAP-L138/AM18x based system"
+	depends on !ARCH_DAVINCI_DMx || AUTO_ZRELADDR
 	select ARCH_DAVINCI_DA8XX
 	select CP_INTC
 

arch/arm/mach-davinci/da8xx-dt.c

@@ -20,7 +20,7 @@
 
 #define DA8XX_NUM_UARTS	3
 
-static struct of_device_id da8xx_irq_match[] __initdata = {
+static const struct of_device_id da8xx_irq_match[] __initconst = {
 	{ .compatible = "ti,cp-intc", .data = cp_intc_of_init, },
 	{ }
 };

arch/arm/mach-davinci/mux.c

@@ -30,7 +30,7 @@ static void __iomem *pinmux_base;
 /*
  * Sets the DAVINCI MUX register based on the table
  */
-int __init_or_module davinci_cfg_reg(const unsigned long index)
+int davinci_cfg_reg(const unsigned long index)
 {
 	static DEFINE_SPINLOCK(mux_spin_lock);
 	struct davinci_soc_info *soc_info = &davinci_soc_info;
@@ -101,7 +101,7 @@ int __init_or_module davinci_cfg_reg(const unsigned long index)
 }
 EXPORT_SYMBOL(davinci_cfg_reg);
 
-int __init_or_module davinci_cfg_reg_list(const short pins[])
+int davinci_cfg_reg_list(const short pins[])
 {
 	int i, error = -EINVAL;
 

arch/arm/mach-exynos/exynos.c

@@ -227,7 +227,7 @@ static void __init exynos_dt_machine_init(void)
 	of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
 }
 
-static char const *exynos_dt_compat[] __initconst = {
+static char const *const exynos_dt_compat[] __initconst = {
 	"samsung,exynos3",
 	"samsung,exynos3250",
 	"samsung,exynos4",

arch/arm/mach-exynos/suspend.c

@@ -587,7 +587,7 @@ static struct exynos_pm_data exynos5420_pm_data = {
 	.cpu_suspend	= exynos5420_cpu_suspend,
 };
 
-static struct of_device_id exynos_pmu_of_device_ids[] = {
+static const struct of_device_id exynos_pmu_of_device_ids[] __initconst = {
 	{
 		.compatible = "samsung,exynos3250-pmu",
 		.data = &exynos3250_pm_data,

arch/arm/mach-highbank/highbank.c

@@ -169,7 +169,7 @@ static void __init highbank_init(void)
 		platform_device_register(&highbank_cpuidle_device);
 }
 
-static const char *highbank_match[] __initconst = {
+static const char *const highbank_match[] __initconst = {
 	"calxeda,highbank",
 	"calxeda,ecx-2000",
 	NULL,

arch/arm/mach-hisi/hisilicon.c

@@ -45,7 +45,7 @@ static void __init hi3620_map_io(void)
 	iotable_init(hi3620_io_desc, ARRAY_SIZE(hi3620_io_desc));
 }
 
-static const char *hi3xxx_compat[] __initconst = {
+static const char *const hi3xxx_compat[] __initconst = {
 	"hisilicon,hi3620-hi4511",
 	NULL,
 };
@@ -55,7 +55,7 @@ DT_MACHINE_START(HI3620, "Hisilicon Hi3620 (Flattened Device Tree)")
 	.dt_compat	= hi3xxx_compat,
 MACHINE_END
 
-static const char *hix5hd2_compat[] __initconst = {
+static const char *const hix5hd2_compat[] __initconst = {
 	"hisilicon,hix5hd2",
 	NULL,
 };
@@ -64,7 +64,7 @@ DT_MACHINE_START(HIX5HD2_DT, "Hisilicon HIX5HD2 (Flattened Device Tree)")
 	.dt_compat	= hix5hd2_compat,
 MACHINE_END
 
-static const char *hip04_compat[] __initconst = {
+static const char *const hip04_compat[] __initconst = {
 	"hisilicon,hip04-d01",
 	NULL,
 };
@@ -73,7 +73,7 @@ DT_MACHINE_START(HIP04, "Hisilicon HiP04 (Flattened Device Tree)")
 	.dt_compat	= hip04_compat,
 MACHINE_END
 
-static const char *hip01_compat[] __initconst = {
+static const char *const hip01_compat[] __initconst = {
 	"hisilicon,hip01",
 	"hisilicon,hip01-ca9x2",
 	NULL,