ath9k: Add a routine for initializing channel contexts

Setup the offchannel/sched timers and the chanctx work
inside the new function.

Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

drivers/net/wireless/ath/ath9k/ath9k.h

@@ -422,7 +422,6 @@ void ath_chanctx_set_channel(struct ath_softc *sc, struct ath_chanctx *ctx,
 void ath_chanctx_switch(struct ath_softc *sc, struct ath_chanctx *ctx,
 			struct cfg80211_chan_def *chandef);
 void ath_chanctx_check_active(struct ath_softc *sc, struct ath_chanctx *ctx);
-void ath_offchannel_timer(unsigned long data);
 void ath_offchannel_channel_change(struct ath_softc *sc);
 void ath_chanctx_offchan_switch(struct ath_softc *sc,
 				struct ieee80211_channel *chan);
@@ -430,7 +429,6 @@ struct ath_chanctx *ath_chanctx_get_oper_chan(struct ath_softc *sc,
 					      bool active);
 void ath_chanctx_event(struct ath_softc *sc, struct ieee80211_vif *vif,
 		       enum ath_chanctx_event ev);
-void ath_chanctx_timer(unsigned long data);
 void ath_offchannel_next(struct ath_softc *sc);
 void ath_scan_complete(struct ath_softc *sc, bool abort);
 void ath_roc_complete(struct ath_softc *sc, bool abort);
@@ -438,6 +436,7 @@ void ath_roc_complete(struct ath_softc *sc, bool abort);
 #ifdef CONFIG_ATH9K_CHANNEL_CONTEXT
 bool ath9k_is_chanctx_enabled(void);
 void ath9k_fill_chanctx_ops(void);
+void ath9k_init_channel_context(struct ath_softc *sc);
 int ath9k_init_p2p(struct ath_softc *sc);
 void ath9k_deinit_p2p(struct ath_softc *sc);
 void ath9k_p2p_remove_vif(struct ath_softc *sc,
@@ -454,6 +453,9 @@ static inline bool ath9k_is_chanctx_enabled(void)
 static inline void ath9k_fill_chanctx_ops(void)
 {
 }
+static inline void ath9k_init_channel_context(struct ath_softc *sc)
+{
+}
 static inline int ath9k_init_p2p(struct ath_softc *sc)
 {
 	return 0;

drivers/net/wireless/ath/ath9k/channel.c

@@ -499,13 +499,6 @@ static void ath_chanctx_adjust_tbtt_delta(struct ath_softc *sc)
 	prev->tsf_val += offset;
 }
 
-void ath_chanctx_timer(unsigned long data)
-{
-	struct ath_softc *sc = (struct ath_softc *) data;
-
-	ath_chanctx_event(sc, NULL, ATH_CHANCTX_EVENT_TSF_TIMER);
-}
-
 /* Configure the TSF based hardware timer for a channel switch.
  * Also set up backup software timer, in case the gen timer fails.
  * This could be caused by a hardware reset.
@@ -907,7 +900,16 @@ void ath_offchannel_channel_change(struct ath_softc *sc)
 	}
 }
 
-void ath_offchannel_timer(unsigned long data)
+#ifdef CONFIG_ATH9K_CHANNEL_CONTEXT
+
+static void ath_chanctx_timer(unsigned long data)
+{
+	struct ath_softc *sc = (struct ath_softc *) data;
+
+	ath_chanctx_event(sc, NULL, ATH_CHANCTX_EVENT_TSF_TIMER);
+}
+
+static void ath_offchannel_timer(unsigned long data)
 {
 	struct ath_softc *sc = (struct ath_softc *)data;
 	struct ath_chanctx *ctx;
@@ -947,7 +949,15 @@ void ath_offchannel_timer(unsigned long data)
 	}
 }
 
-#ifdef CONFIG_ATH9K_CHANNEL_CONTEXT
+void ath9k_init_channel_context(struct ath_softc *sc)
+{
+	INIT_WORK(&sc->chanctx_work, ath_chanctx_work);
+
+	setup_timer(&sc->offchannel.timer, ath_offchannel_timer,
+		    (unsigned long)sc);
+	setup_timer(&sc->sched.timer, ath_chanctx_timer,
+		    (unsigned long)sc);
+}
 
 bool ath9k_is_chanctx_enabled(void)
 {

drivers/net/wireless/ath/ath9k/init.c

@@ -571,11 +571,9 @@ static int ath9k_init_softc(u16 devid, struct ath_softc *sc,
 	setup_timer(&sc->sleep_timer, ath_ps_full_sleep, (unsigned long)sc);
 	INIT_WORK(&sc->hw_reset_work, ath_reset_work);
 	INIT_WORK(&sc->paprd_work, ath_paprd_calibrate);
-	INIT_WORK(&sc->chanctx_work, ath_chanctx_work);
 	INIT_DELAYED_WORK(&sc->hw_pll_work, ath_hw_pll_work);
-	setup_timer(&sc->offchannel.timer, ath_offchannel_timer,
-		    (unsigned long)sc);
-	setup_timer(&sc->sched.timer, ath_chanctx_timer, (unsigned long)sc);
+
+	ath9k_init_channel_context(sc);
 
 	/*
 	 * Cache line size is used to size and align various