at86rf230: add irq low-level for polarity

The at86rf2xx chips supports the setting of irq polarity if active low
or active high. This patch adds a handling for IRQ_ACTIVE_LOW if the
irq_type is IRQ_TYPE_LEVEL_LOW.

Signed-off-by: Alexander Aring <alex.aring@gmail.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>

drivers/net/ieee802154/at86rf230.c

@@ -1321,7 +1321,8 @@ static int at86rf230_hw_init(struct at86rf230_local *lp, u8 xtal_trim)
 		return rc;
 
 	irq_type = irq_get_trigger_type(lp->spi->irq);
-	if (irq_type == IRQ_TYPE_EDGE_FALLING)
+	if (irq_type == IRQ_TYPE_EDGE_FALLING ||
+	    irq_type == IRQ_TYPE_LEVEL_LOW)
 		irq_pol = IRQ_ACTIVE_LOW;
 
 	rc = at86rf230_write_subreg(lp, SR_IRQ_POLARITY, irq_pol);