Merge tag 'hwmon-for-v4.20-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging

Pull hwmon fixes from Guenter Roeck:

 - fix temp4_type attribute permissions in w83795 driver

 - fix tacho fault detection in mlxreg-fan driver

 - fix current value calculations in ina2xx driver

 - fix initial notification/warning in raspberrypi driver

 - fix a NULL pointer access in ina2xx

* tag 'hwmon-for-v4.20-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging:
  hwmon: (w83795) temp4_type has writable permission
  hwmon: (mlxreg-fan) Fix macros for tacho fault reading
  hwmon: (ina2xx) Fix current value calculation
  hwmon: (raspberrypi) Fix initial notify
  hwmon (ina2xx) Fix NULL id pointer in probe()

drivers/hwmon/ina2xx.c

@@ -274,7 +274,7 @@ static int ina2xx_get_value(struct ina2xx_data *data, u8 reg,
 		break;
 	case INA2XX_CURRENT:
 		/* signed register, result in mA */
-		val = regval * data->current_lsb_uA;
+		val = (s16)regval * data->current_lsb_uA;
 		val = DIV_ROUND_CLOSEST(val, 1000);
 		break;
 	case INA2XX_CALIBRATION:
@@ -491,7 +491,7 @@ static int ina2xx_probe(struct i2c_client *client,
 	}
 
 	data->groups[group++] = &ina2xx_group;
-	if (id->driver_data == ina226)
+	if (chip == ina226)
 		data->groups[group++] = &ina226_group;
 
 	hwmon_dev = devm_hwmon_device_register_with_groups(dev, client->name,
@@ -500,7 +500,7 @@ static int ina2xx_probe(struct i2c_client *client,
 		return PTR_ERR(hwmon_dev);
 
 	dev_info(dev, "power monitor %s (Rshunt = %li uOhm)\n",
-		 id->name, data->rshunt);
+		 client->name, data->rshunt);
 
 	return 0;
 }

drivers/hwmon/mlxreg-fan.c

@@ -51,7 +51,7 @@
  */
 #define MLXREG_FAN_GET_RPM(rval, d, s)	(DIV_ROUND_CLOSEST(15000000 * 100, \
 					 ((rval) + (s)) * (d)))
-#define MLXREG_FAN_GET_FAULT(val, mask) (!!((val) ^ (mask)))
+#define MLXREG_FAN_GET_FAULT(val, mask) (!((val) ^ (mask)))
 #define MLXREG_FAN_PWM_DUTY2STATE(duty)	(DIV_ROUND_CLOSEST((duty) *	\
 					 MLXREG_FAN_MAX_STATE,		\
 					 MLXREG_FAN_MAX_DUTY))

drivers/hwmon/raspberrypi-hwmon.c

@@ -115,7 +115,6 @@ static int rpi_hwmon_probe(struct platform_device *pdev)
 {
 	struct device *dev = &pdev->dev;
 	struct rpi_hwmon_data *data;
-	int ret;
 
 	data = devm_kzalloc(dev, sizeof(*data), GFP_KERNEL);
 	if (!data)
@@ -124,11 +123,6 @@ static int rpi_hwmon_probe(struct platform_device *pdev)
 	/* Parent driver assure that firmware is correct */
 	data->fw = dev_get_drvdata(dev->parent);
 
-	/* Init throttled */
-	ret = rpi_firmware_property(data->fw, RPI_FIRMWARE_GET_THROTTLED,
-				    &data->last_throttled,
-				    sizeof(data->last_throttled));
-
 	data->hwmon_dev = devm_hwmon_device_register_with_info(dev, "rpi_volt",
 							       data,
 							       &rpi_chip_info,

drivers/hwmon/w83795.c

@@ -1691,7 +1691,7 @@ store_sf_setup(struct device *dev, struct device_attribute *attr,
  * somewhere else in the code
  */
 #define SENSOR_ATTR_TEMP(index) {					\
-	SENSOR_ATTR_2(temp##index##_type, S_IRUGO | (index < 4 ? S_IWUSR : 0), \
+	SENSOR_ATTR_2(temp##index##_type, S_IRUGO | (index < 5 ? S_IWUSR : 0), \
 		show_temp_mode, store_temp_mode, NOT_USED, index - 1),	\
 	SENSOR_ATTR_2(temp##index##_input, S_IRUGO, show_temp,		\
 		NULL, TEMP_READ, index - 1),				\