spi: sun4i: fix FIFO limit

When testing SPI without DMA I noticed that filling the FIFO on the
spi controller causes timeout.

Always leave room for one byte in the FIFO.

Signed-off-by: Michal Suchanek <hramrach@gmail.com>
Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Cc: stable@vger.kernel.org

drivers/spi/spi-sun4i.c

@@ -179,7 +179,10 @@ static int sun4i_spi_transfer_one(struct spi_master *master,
 
 	/* We don't support transfer larger than the FIFO */
 	if (tfr->len > SUN4I_FIFO_DEPTH)
-		return -EINVAL;
+		return -EMSGSIZE;
+
+	if (tfr->tx_buf && tfr->len >= SUN4I_FIFO_DEPTH)
+		return -EMSGSIZE;
 
 	reinit_completion(&sspi->done);
 	sspi->tx_buf = tfr->tx_buf;
@@ -269,8 +272,12 @@ static int sun4i_spi_transfer_one(struct spi_master *master,
 	sun4i_spi_write(sspi, SUN4I_BURST_CNT_REG, SUN4I_BURST_CNT(tfr->len));
 	sun4i_spi_write(sspi, SUN4I_XMIT_CNT_REG, SUN4I_XMIT_CNT(tx_len));
 
-	/* Fill the TX FIFO */
-	sun4i_spi_fill_fifo(sspi, SUN4I_FIFO_DEPTH);
+	/*
+	 * Fill the TX FIFO
+	 * Filling the FIFO fully causes timeout for some reason
+	 * at least on spi2 on A10s
+	 */
+	sun4i_spi_fill_fifo(sspi, SUN4I_FIFO_DEPTH - 1);
 
 	/* Enable the interrupts */
 	sun4i_spi_write(sspi, SUN4I_INT_CTL_REG, SUN4I_INT_CTL_TC);