drm/i915: Add fault address to error state for gen8 and gen9

The faulting virtual address is >32bits and has been moved
to different registers. Add to error state and output upper
register first, in the same line for easy reconstruction of
the fault address.

v2: correct gen masking (Michel)
v3: s/TBL/TLB (Ville)

Signed-off-by: Mika Kuoppala <mika.kuoppala@intel.com>
Reviewed-by: Michel Thierry <michel.thierry@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>

drivers/gpu/drm/i915/i915_drv.h

@@ -427,6 +427,8 @@ struct drm_i915_error_state {
 	u32 forcewake;
 	u32 error; /* gen6+ */
 	u32 err_int; /* gen7 */
+	u32 fault_data0; /* gen8, gen9 */
+	u32 fault_data1; /* gen8, gen9 */
 	u32 done_reg;
 	u32 gac_eco;
 	u32 gam_ecochk;

drivers/gpu/drm/i915/i915_gpu_error.c

@@ -386,6 +386,11 @@ int i915_error_state_to_str(struct drm_i915_error_state_buf *m,
 
 	if (INTEL_INFO(dev)->gen >= 6) {
 		err_printf(m, "ERROR: 0x%08x\n", error->error);
+
+		if (INTEL_INFO(dev)->gen >= 8)
+			err_printf(m, "FAULT_TLB_DATA: 0x%08x 0x%08x\n",
+				   error->fault_data1, error->fault_data0);
+
 		err_printf(m, "DONE_REG: 0x%08x\n", error->done_reg);
 	}
 
@@ -1171,6 +1176,11 @@ static void i915_capture_reg_state(struct drm_i915_private *dev_priv,
 	if (IS_GEN7(dev))
 		error->err_int = I915_READ(GEN7_ERR_INT);
 
+	if (INTEL_INFO(dev)->gen >= 8) {
+		error->fault_data0 = I915_READ(GEN8_FAULT_TLB_DATA0);
+		error->fault_data1 = I915_READ(GEN8_FAULT_TLB_DATA1);
+	}
+
 	if (IS_GEN6(dev)) {
 		error->forcewake = I915_READ(FORCEWAKE);
 		error->gab_ctl = I915_READ(GAB_CTL);

drivers/gpu/drm/i915/i915_reg.h

@@ -1306,6 +1306,9 @@ enum skl_disp_power_wells {
 #define   ERR_INT_FIFO_UNDERRUN_A	(1<<0)
 #define   ERR_INT_FIFO_UNDERRUN(pipe)	(1<<(pipe*3))
 
+#define GEN8_FAULT_TLB_DATA0		0x04b10
+#define GEN8_FAULT_TLB_DATA1		0x04b14
+
 #define FPGA_DBG		0x42300
 #define   FPGA_DBG_RM_NOCLAIM	(1<<31)