|
@@ -9,8 +9,9 @@
|
|
|
#include <linux/videodev2.h>
|
|
|
#include <linux/delay.h>
|
|
|
#include <linux/video_decoder.h>
|
|
|
-#include <media/v4l2-common.h>
|
|
|
+#include <media/v4l2-device.h>
|
|
|
#include <media/tvp5150.h>
|
|
|
+#include <media/v4l2-i2c-drv-legacy.h>
|
|
|
|
|
|
#include "tvp5150_reg.h"
|
|
|
|
|
@@ -29,21 +30,7 @@ I2C_CLIENT_INSMOD;
|
|
|
|
|
|
static int debug;
|
|
|
module_param(debug, int, 0);
|
|
|
-MODULE_PARM_DESC(debug, "Debug level (0-1)");
|
|
|
-
|
|
|
-#define tvp5150_err(fmt, arg...) do { \
|
|
|
- printk(KERN_ERR "%s %d-%04x: " fmt, c->driver->driver.name, \
|
|
|
- i2c_adapter_id(c->adapter), c->addr , ## arg); } while (0)
|
|
|
-#define tvp5150_info(fmt, arg...) do { \
|
|
|
- printk(KERN_INFO "%s %d-%04x: " fmt, c->driver->driver.name, \
|
|
|
- i2c_adapter_id(c->adapter), c->addr , ## arg); } while (0)
|
|
|
-#define tvp5150_dbg(num, fmt, arg...) \
|
|
|
- do { \
|
|
|
- if (debug >= num) \
|
|
|
- printk(KERN_DEBUG "%s debug %d-%04x: " fmt,\
|
|
|
- c->driver->driver.name, \
|
|
|
- i2c_adapter_id(c->adapter), \
|
|
|
- c->addr , ## arg); } while (0)
|
|
|
+MODULE_PARM_DESC(debug, "Debug level (0-2)");
|
|
|
|
|
|
/* supported controls */
|
|
|
static struct v4l2_queryctrl tvp5150_qctrl[] = {
|
|
@@ -87,7 +74,7 @@ static struct v4l2_queryctrl tvp5150_qctrl[] = {
|
|
|
};
|
|
|
|
|
|
struct tvp5150 {
|
|
|
- struct i2c_client *client;
|
|
|
+ struct v4l2_subdev sd;
|
|
|
|
|
|
v4l2_std_id norm; /* Current set standard */
|
|
|
struct v4l2_routing route;
|
|
@@ -98,49 +85,57 @@ struct tvp5150 {
|
|
|
int sat;
|
|
|
};
|
|
|
|
|
|
-static int tvp5150_read(struct i2c_client *c, unsigned char addr)
|
|
|
+static inline struct tvp5150 *to_tvp5150(struct v4l2_subdev *sd)
|
|
|
{
|
|
|
+ return container_of(sd, struct tvp5150, sd);
|
|
|
+}
|
|
|
+
|
|
|
+static int tvp5150_read(struct v4l2_subdev *sd, unsigned char addr)
|
|
|
+{
|
|
|
+ struct i2c_client *c = v4l2_get_subdevdata(sd);
|
|
|
unsigned char buffer[1];
|
|
|
int rc;
|
|
|
|
|
|
buffer[0] = addr;
|
|
|
if (1 != (rc = i2c_master_send(c, buffer, 1)))
|
|
|
- tvp5150_dbg(0, "i2c i/o error: rc == %d (should be 1)\n", rc);
|
|
|
+ v4l2_dbg(0, debug, sd, "i2c i/o error: rc == %d (should be 1)\n", rc);
|
|
|
|
|
|
msleep(10);
|
|
|
|
|
|
if (1 != (rc = i2c_master_recv(c, buffer, 1)))
|
|
|
- tvp5150_dbg(0, "i2c i/o error: rc == %d (should be 1)\n", rc);
|
|
|
+ v4l2_dbg(0, debug, sd, "i2c i/o error: rc == %d (should be 1)\n", rc);
|
|
|
|
|
|
- tvp5150_dbg(2, "tvp5150: read 0x%02x = 0x%02x\n", addr, buffer[0]);
|
|
|
+ v4l2_dbg(2, debug, sd, "tvp5150: read 0x%02x = 0x%02x\n", addr, buffer[0]);
|
|
|
|
|
|
return (buffer[0]);
|
|
|
}
|
|
|
|
|
|
-static inline void tvp5150_write(struct i2c_client *c, unsigned char addr,
|
|
|
+static inline void tvp5150_write(struct v4l2_subdev *sd, unsigned char addr,
|
|
|
unsigned char value)
|
|
|
{
|
|
|
+ struct i2c_client *c = v4l2_get_subdevdata(sd);
|
|
|
unsigned char buffer[2];
|
|
|
int rc;
|
|
|
|
|
|
buffer[0] = addr;
|
|
|
buffer[1] = value;
|
|
|
- tvp5150_dbg(2, "tvp5150: writing 0x%02x 0x%02x\n", buffer[0], buffer[1]);
|
|
|
+ v4l2_dbg(2, debug, sd, "tvp5150: writing 0x%02x 0x%02x\n", buffer[0], buffer[1]);
|
|
|
if (2 != (rc = i2c_master_send(c, buffer, 2)))
|
|
|
- tvp5150_dbg(0, "i2c i/o error: rc == %d (should be 2)\n", rc);
|
|
|
+ v4l2_dbg(0, debug, sd, "i2c i/o error: rc == %d (should be 2)\n", rc);
|
|
|
}
|
|
|
|
|
|
-static void dump_reg_range(struct i2c_client *c, char *s, u8 init, const u8 end,int max_line)
|
|
|
+static void dump_reg_range(struct v4l2_subdev *sd, char *s, u8 init,
|
|
|
+ const u8 end, int max_line)
|
|
|
{
|
|
|
- int i=0;
|
|
|
+ int i = 0;
|
|
|
|
|
|
- while (init!=(u8)(end+1)) {
|
|
|
- if ((i%max_line) == 0) {
|
|
|
- if (i>0)
|
|
|
+ while (init != (u8)(end + 1)) {
|
|
|
+ if ((i % max_line) == 0) {
|
|
|
+ if (i > 0)
|
|
|
printk("\n");
|
|
|
- printk("tvp5150: %s reg 0x%02x = ",s,init);
|
|
|
+ printk("tvp5150: %s reg 0x%02x = ", s, init);
|
|
|
}
|
|
|
- printk("%02x ",tvp5150_read(c, init));
|
|
|
+ printk("%02x ", tvp5150_read(sd, init));
|
|
|
|
|
|
init++;
|
|
|
i++;
|
|
@@ -148,147 +143,148 @@ static void dump_reg_range(struct i2c_client *c, char *s, u8 init, const u8 end,
|
|
|
printk("\n");
|
|
|
}
|
|
|
|
|
|
-static void dump_reg(struct i2c_client *c)
|
|
|
+static int tvp5150_log_status(struct v4l2_subdev *sd)
|
|
|
{
|
|
|
printk("tvp5150: Video input source selection #1 = 0x%02x\n",
|
|
|
- tvp5150_read(c, TVP5150_VD_IN_SRC_SEL_1));
|
|
|
+ tvp5150_read(sd, TVP5150_VD_IN_SRC_SEL_1));
|
|
|
printk("tvp5150: Analog channel controls = 0x%02x\n",
|
|
|
- tvp5150_read(c, TVP5150_ANAL_CHL_CTL));
|
|
|
+ tvp5150_read(sd, TVP5150_ANAL_CHL_CTL));
|
|
|
printk("tvp5150: Operation mode controls = 0x%02x\n",
|
|
|
- tvp5150_read(c, TVP5150_OP_MODE_CTL));
|
|
|
+ tvp5150_read(sd, TVP5150_OP_MODE_CTL));
|
|
|
printk("tvp5150: Miscellaneous controls = 0x%02x\n",
|
|
|
- tvp5150_read(c, TVP5150_MISC_CTL));
|
|
|
+ tvp5150_read(sd, TVP5150_MISC_CTL));
|
|
|
printk("tvp5150: Autoswitch mask= 0x%02x\n",
|
|
|
- tvp5150_read(c, TVP5150_AUTOSW_MSK));
|
|
|
+ tvp5150_read(sd, TVP5150_AUTOSW_MSK));
|
|
|
printk("tvp5150: Color killer threshold control = 0x%02x\n",
|
|
|
- tvp5150_read(c, TVP5150_COLOR_KIL_THSH_CTL));
|
|
|
+ tvp5150_read(sd, TVP5150_COLOR_KIL_THSH_CTL));
|
|
|
printk("tvp5150: Luminance processing controls #1 #2 and #3 = %02x %02x %02x\n",
|
|
|
- tvp5150_read(c, TVP5150_LUMA_PROC_CTL_1),
|
|
|
- tvp5150_read(c, TVP5150_LUMA_PROC_CTL_2),
|
|
|
- tvp5150_read(c, TVP5150_LUMA_PROC_CTL_3));
|
|
|
+ tvp5150_read(sd, TVP5150_LUMA_PROC_CTL_1),
|
|
|
+ tvp5150_read(sd, TVP5150_LUMA_PROC_CTL_2),
|
|
|
+ tvp5150_read(sd, TVP5150_LUMA_PROC_CTL_3));
|
|
|
printk("tvp5150: Brightness control = 0x%02x\n",
|
|
|
- tvp5150_read(c, TVP5150_BRIGHT_CTL));
|
|
|
+ tvp5150_read(sd, TVP5150_BRIGHT_CTL));
|
|
|
printk("tvp5150: Color saturation control = 0x%02x\n",
|
|
|
- tvp5150_read(c, TVP5150_SATURATION_CTL));
|
|
|
+ tvp5150_read(sd, TVP5150_SATURATION_CTL));
|
|
|
printk("tvp5150: Hue control = 0x%02x\n",
|
|
|
- tvp5150_read(c, TVP5150_HUE_CTL));
|
|
|
+ tvp5150_read(sd, TVP5150_HUE_CTL));
|
|
|
printk("tvp5150: Contrast control = 0x%02x\n",
|
|
|
- tvp5150_read(c, TVP5150_CONTRAST_CTL));
|
|
|
+ tvp5150_read(sd, TVP5150_CONTRAST_CTL));
|
|
|
printk("tvp5150: Outputs and data rates select = 0x%02x\n",
|
|
|
- tvp5150_read(c, TVP5150_DATA_RATE_SEL));
|
|
|
+ tvp5150_read(sd, TVP5150_DATA_RATE_SEL));
|
|
|
printk("tvp5150: Configuration shared pins = 0x%02x\n",
|
|
|
- tvp5150_read(c, TVP5150_CONF_SHARED_PIN));
|
|
|
+ tvp5150_read(sd, TVP5150_CONF_SHARED_PIN));
|
|
|
printk("tvp5150: Active video cropping start = 0x%02x%02x\n",
|
|
|
- tvp5150_read(c, TVP5150_ACT_VD_CROP_ST_MSB),
|
|
|
- tvp5150_read(c, TVP5150_ACT_VD_CROP_ST_LSB));
|
|
|
+ tvp5150_read(sd, TVP5150_ACT_VD_CROP_ST_MSB),
|
|
|
+ tvp5150_read(sd, TVP5150_ACT_VD_CROP_ST_LSB));
|
|
|
printk("tvp5150: Active video cropping stop = 0x%02x%02x\n",
|
|
|
- tvp5150_read(c, TVP5150_ACT_VD_CROP_STP_MSB),
|
|
|
- tvp5150_read(c, TVP5150_ACT_VD_CROP_STP_LSB));
|
|
|
+ tvp5150_read(sd, TVP5150_ACT_VD_CROP_STP_MSB),
|
|
|
+ tvp5150_read(sd, TVP5150_ACT_VD_CROP_STP_LSB));
|
|
|
printk("tvp5150: Genlock/RTC = 0x%02x\n",
|
|
|
- tvp5150_read(c, TVP5150_GENLOCK));
|
|
|
+ tvp5150_read(sd, TVP5150_GENLOCK));
|
|
|
printk("tvp5150: Horizontal sync start = 0x%02x\n",
|
|
|
- tvp5150_read(c, TVP5150_HORIZ_SYNC_START));
|
|
|
+ tvp5150_read(sd, TVP5150_HORIZ_SYNC_START));
|
|
|
printk("tvp5150: Vertical blanking start = 0x%02x\n",
|
|
|
- tvp5150_read(c, TVP5150_VERT_BLANKING_START));
|
|
|
+ tvp5150_read(sd, TVP5150_VERT_BLANKING_START));
|
|
|
printk("tvp5150: Vertical blanking stop = 0x%02x\n",
|
|
|
- tvp5150_read(c, TVP5150_VERT_BLANKING_STOP));
|
|
|
+ tvp5150_read(sd, TVP5150_VERT_BLANKING_STOP));
|
|
|
printk("tvp5150: Chrominance processing control #1 and #2 = %02x %02x\n",
|
|
|
- tvp5150_read(c, TVP5150_CHROMA_PROC_CTL_1),
|
|
|
- tvp5150_read(c, TVP5150_CHROMA_PROC_CTL_2));
|
|
|
+ tvp5150_read(sd, TVP5150_CHROMA_PROC_CTL_1),
|
|
|
+ tvp5150_read(sd, TVP5150_CHROMA_PROC_CTL_2));
|
|
|
printk("tvp5150: Interrupt reset register B = 0x%02x\n",
|
|
|
- tvp5150_read(c, TVP5150_INT_RESET_REG_B));
|
|
|
+ tvp5150_read(sd, TVP5150_INT_RESET_REG_B));
|
|
|
printk("tvp5150: Interrupt enable register B = 0x%02x\n",
|
|
|
- tvp5150_read(c, TVP5150_INT_ENABLE_REG_B));
|
|
|
+ tvp5150_read(sd, TVP5150_INT_ENABLE_REG_B));
|
|
|
printk("tvp5150: Interrupt configuration register B = 0x%02x\n",
|
|
|
- tvp5150_read(c, TVP5150_INTT_CONFIG_REG_B));
|
|
|
+ tvp5150_read(sd, TVP5150_INTT_CONFIG_REG_B));
|
|
|
printk("tvp5150: Video standard = 0x%02x\n",
|
|
|
- tvp5150_read(c, TVP5150_VIDEO_STD));
|
|
|
+ tvp5150_read(sd, TVP5150_VIDEO_STD));
|
|
|
printk("tvp5150: Chroma gain factor: Cb=0x%02x Cr=0x%02x\n",
|
|
|
- tvp5150_read(c, TVP5150_CB_GAIN_FACT),
|
|
|
- tvp5150_read(c, TVP5150_CR_GAIN_FACTOR));
|
|
|
+ tvp5150_read(sd, TVP5150_CB_GAIN_FACT),
|
|
|
+ tvp5150_read(sd, TVP5150_CR_GAIN_FACTOR));
|
|
|
printk("tvp5150: Macrovision on counter = 0x%02x\n",
|
|
|
- tvp5150_read(c, TVP5150_MACROVISION_ON_CTR));
|
|
|
+ tvp5150_read(sd, TVP5150_MACROVISION_ON_CTR));
|
|
|
printk("tvp5150: Macrovision off counter = 0x%02x\n",
|
|
|
- tvp5150_read(c, TVP5150_MACROVISION_OFF_CTR));
|
|
|
+ tvp5150_read(sd, TVP5150_MACROVISION_OFF_CTR));
|
|
|
printk("tvp5150: ITU-R BT.656.%d timing(TVP5150AM1 only)\n",
|
|
|
- (tvp5150_read(c, TVP5150_REV_SELECT)&1)?3:4);
|
|
|
+ (tvp5150_read(sd, TVP5150_REV_SELECT) & 1) ? 3 : 4);
|
|
|
printk("tvp5150: Device ID = %02x%02x\n",
|
|
|
- tvp5150_read(c, TVP5150_MSB_DEV_ID),
|
|
|
- tvp5150_read(c, TVP5150_LSB_DEV_ID));
|
|
|
+ tvp5150_read(sd, TVP5150_MSB_DEV_ID),
|
|
|
+ tvp5150_read(sd, TVP5150_LSB_DEV_ID));
|
|
|
printk("tvp5150: ROM version = (hex) %02x.%02x\n",
|
|
|
- tvp5150_read(c, TVP5150_ROM_MAJOR_VER),
|
|
|
- tvp5150_read(c, TVP5150_ROM_MINOR_VER));
|
|
|
+ tvp5150_read(sd, TVP5150_ROM_MAJOR_VER),
|
|
|
+ tvp5150_read(sd, TVP5150_ROM_MINOR_VER));
|
|
|
printk("tvp5150: Vertical line count = 0x%02x%02x\n",
|
|
|
- tvp5150_read(c, TVP5150_VERT_LN_COUNT_MSB),
|
|
|
- tvp5150_read(c, TVP5150_VERT_LN_COUNT_LSB));
|
|
|
+ tvp5150_read(sd, TVP5150_VERT_LN_COUNT_MSB),
|
|
|
+ tvp5150_read(sd, TVP5150_VERT_LN_COUNT_LSB));
|
|
|
printk("tvp5150: Interrupt status register B = 0x%02x\n",
|
|
|
- tvp5150_read(c, TVP5150_INT_STATUS_REG_B));
|
|
|
+ tvp5150_read(sd, TVP5150_INT_STATUS_REG_B));
|
|
|
printk("tvp5150: Interrupt active register B = 0x%02x\n",
|
|
|
- tvp5150_read(c, TVP5150_INT_ACTIVE_REG_B));
|
|
|
+ tvp5150_read(sd, TVP5150_INT_ACTIVE_REG_B));
|
|
|
printk("tvp5150: Status regs #1 to #5 = %02x %02x %02x %02x %02x\n",
|
|
|
- tvp5150_read(c, TVP5150_STATUS_REG_1),
|
|
|
- tvp5150_read(c, TVP5150_STATUS_REG_2),
|
|
|
- tvp5150_read(c, TVP5150_STATUS_REG_3),
|
|
|
- tvp5150_read(c, TVP5150_STATUS_REG_4),
|
|
|
- tvp5150_read(c, TVP5150_STATUS_REG_5));
|
|
|
+ tvp5150_read(sd, TVP5150_STATUS_REG_1),
|
|
|
+ tvp5150_read(sd, TVP5150_STATUS_REG_2),
|
|
|
+ tvp5150_read(sd, TVP5150_STATUS_REG_3),
|
|
|
+ tvp5150_read(sd, TVP5150_STATUS_REG_4),
|
|
|
+ tvp5150_read(sd, TVP5150_STATUS_REG_5));
|
|
|
|
|
|
- dump_reg_range(c,"Teletext filter 1", TVP5150_TELETEXT_FIL1_INI,
|
|
|
- TVP5150_TELETEXT_FIL1_END,8);
|
|
|
- dump_reg_range(c,"Teletext filter 2", TVP5150_TELETEXT_FIL2_INI,
|
|
|
- TVP5150_TELETEXT_FIL2_END,8);
|
|
|
+ dump_reg_range(sd, "Teletext filter 1", TVP5150_TELETEXT_FIL1_INI,
|
|
|
+ TVP5150_TELETEXT_FIL1_END, 8);
|
|
|
+ dump_reg_range(sd, "Teletext filter 2", TVP5150_TELETEXT_FIL2_INI,
|
|
|
+ TVP5150_TELETEXT_FIL2_END, 8);
|
|
|
|
|
|
printk("tvp5150: Teletext filter enable = 0x%02x\n",
|
|
|
- tvp5150_read(c, TVP5150_TELETEXT_FIL_ENA));
|
|
|
+ tvp5150_read(sd, TVP5150_TELETEXT_FIL_ENA));
|
|
|
printk("tvp5150: Interrupt status register A = 0x%02x\n",
|
|
|
- tvp5150_read(c, TVP5150_INT_STATUS_REG_A));
|
|
|
+ tvp5150_read(sd, TVP5150_INT_STATUS_REG_A));
|
|
|
printk("tvp5150: Interrupt enable register A = 0x%02x\n",
|
|
|
- tvp5150_read(c, TVP5150_INT_ENABLE_REG_A));
|
|
|
+ tvp5150_read(sd, TVP5150_INT_ENABLE_REG_A));
|
|
|
printk("tvp5150: Interrupt configuration = 0x%02x\n",
|
|
|
- tvp5150_read(c, TVP5150_INT_CONF));
|
|
|
+ tvp5150_read(sd, TVP5150_INT_CONF));
|
|
|
printk("tvp5150: VDP status register = 0x%02x\n",
|
|
|
- tvp5150_read(c, TVP5150_VDP_STATUS_REG));
|
|
|
+ tvp5150_read(sd, TVP5150_VDP_STATUS_REG));
|
|
|
printk("tvp5150: FIFO word count = 0x%02x\n",
|
|
|
- tvp5150_read(c, TVP5150_FIFO_WORD_COUNT));
|
|
|
+ tvp5150_read(sd, TVP5150_FIFO_WORD_COUNT));
|
|
|
printk("tvp5150: FIFO interrupt threshold = 0x%02x\n",
|
|
|
- tvp5150_read(c, TVP5150_FIFO_INT_THRESHOLD));
|
|
|
+ tvp5150_read(sd, TVP5150_FIFO_INT_THRESHOLD));
|
|
|
printk("tvp5150: FIFO reset = 0x%02x\n",
|
|
|
- tvp5150_read(c, TVP5150_FIFO_RESET));
|
|
|
+ tvp5150_read(sd, TVP5150_FIFO_RESET));
|
|
|
printk("tvp5150: Line number interrupt = 0x%02x\n",
|
|
|
- tvp5150_read(c, TVP5150_LINE_NUMBER_INT));
|
|
|
+ tvp5150_read(sd, TVP5150_LINE_NUMBER_INT));
|
|
|
printk("tvp5150: Pixel alignment register = 0x%02x%02x\n",
|
|
|
- tvp5150_read(c, TVP5150_PIX_ALIGN_REG_HIGH),
|
|
|
- tvp5150_read(c, TVP5150_PIX_ALIGN_REG_LOW));
|
|
|
+ tvp5150_read(sd, TVP5150_PIX_ALIGN_REG_HIGH),
|
|
|
+ tvp5150_read(sd, TVP5150_PIX_ALIGN_REG_LOW));
|
|
|
printk("tvp5150: FIFO output control = 0x%02x\n",
|
|
|
- tvp5150_read(c, TVP5150_FIFO_OUT_CTRL));
|
|
|
+ tvp5150_read(sd, TVP5150_FIFO_OUT_CTRL));
|
|
|
printk("tvp5150: Full field enable = 0x%02x\n",
|
|
|
- tvp5150_read(c, TVP5150_FULL_FIELD_ENA));
|
|
|
+ tvp5150_read(sd, TVP5150_FULL_FIELD_ENA));
|
|
|
printk("tvp5150: Full field mode register = 0x%02x\n",
|
|
|
- tvp5150_read(c, TVP5150_FULL_FIELD_MODE_REG));
|
|
|
+ tvp5150_read(sd, TVP5150_FULL_FIELD_MODE_REG));
|
|
|
|
|
|
- dump_reg_range(c,"CC data", TVP5150_CC_DATA_INI,
|
|
|
- TVP5150_CC_DATA_END,8);
|
|
|
+ dump_reg_range(sd, "CC data", TVP5150_CC_DATA_INI,
|
|
|
+ TVP5150_CC_DATA_END, 8);
|
|
|
|
|
|
- dump_reg_range(c,"WSS data", TVP5150_WSS_DATA_INI,
|
|
|
- TVP5150_WSS_DATA_END,8);
|
|
|
+ dump_reg_range(sd, "WSS data", TVP5150_WSS_DATA_INI,
|
|
|
+ TVP5150_WSS_DATA_END, 8);
|
|
|
|
|
|
- dump_reg_range(c,"VPS data", TVP5150_VPS_DATA_INI,
|
|
|
- TVP5150_VPS_DATA_END,8);
|
|
|
+ dump_reg_range(sd, "VPS data", TVP5150_VPS_DATA_INI,
|
|
|
+ TVP5150_VPS_DATA_END, 8);
|
|
|
|
|
|
- dump_reg_range(c,"VITC data", TVP5150_VITC_DATA_INI,
|
|
|
- TVP5150_VITC_DATA_END,10);
|
|
|
+ dump_reg_range(sd, "VITC data", TVP5150_VITC_DATA_INI,
|
|
|
+ TVP5150_VITC_DATA_END, 10);
|
|
|
|
|
|
- dump_reg_range(c,"Line mode", TVP5150_LINE_MODE_INI,
|
|
|
- TVP5150_LINE_MODE_END,8);
|
|
|
+ dump_reg_range(sd, "Line mode", TVP5150_LINE_MODE_INI,
|
|
|
+ TVP5150_LINE_MODE_END, 8);
|
|
|
+ return 0;
|
|
|
}
|
|
|
|
|
|
/****************************************************************************
|
|
|
Basic functions
|
|
|
****************************************************************************/
|
|
|
|
|
|
-static inline void tvp5150_selmux(struct i2c_client *c)
|
|
|
+static inline void tvp5150_selmux(struct v4l2_subdev *sd)
|
|
|
{
|
|
|
int opmode=0;
|
|
|
- struct tvp5150 *decoder = i2c_get_clientdata(c);
|
|
|
+ struct tvp5150 *decoder = to_tvp5150(sd);
|
|
|
int input = 0;
|
|
|
unsigned char val;
|
|
|
|
|
@@ -309,23 +305,23 @@ static inline void tvp5150_selmux(struct i2c_client *c)
|
|
|
break;
|
|
|
}
|
|
|
|
|
|
- tvp5150_dbg( 1, "Selecting video route: route input=%i, output=%i "
|
|
|
+ v4l2_dbg(1, debug, sd, "Selecting video route: route input=%i, output=%i "
|
|
|
"=> tvp5150 input=%i, opmode=%i\n",
|
|
|
decoder->route.input,decoder->route.output,
|
|
|
input, opmode );
|
|
|
|
|
|
- tvp5150_write(c, TVP5150_OP_MODE_CTL, opmode);
|
|
|
- tvp5150_write(c, TVP5150_VD_IN_SRC_SEL_1, input);
|
|
|
+ tvp5150_write(sd, TVP5150_OP_MODE_CTL, opmode);
|
|
|
+ tvp5150_write(sd, TVP5150_VD_IN_SRC_SEL_1, input);
|
|
|
|
|
|
/* Svideo should enable YCrCb output and disable GPCL output
|
|
|
* For Composite and TV, it should be the reverse
|
|
|
*/
|
|
|
- val = tvp5150_read(c, TVP5150_MISC_CTL);
|
|
|
+ val = tvp5150_read(sd, TVP5150_MISC_CTL);
|
|
|
if (decoder->route.input == TVP5150_SVIDEO)
|
|
|
val = (val & ~0x40) | 0x10;
|
|
|
else
|
|
|
val = (val & ~0x10) | 0x40;
|
|
|
- tvp5150_write(c, TVP5150_MISC_CTL, val);
|
|
|
+ tvp5150_write(sd, TVP5150_MISC_CTL, val);
|
|
|
};
|
|
|
|
|
|
struct i2c_reg_value {
|
|
@@ -593,35 +589,35 @@ static struct i2c_vbi_ram_value vbi_ram_default[] =
|
|
|
{ (u16)-1 }
|
|
|
};
|
|
|
|
|
|
-static int tvp5150_write_inittab(struct i2c_client *c,
|
|
|
+static int tvp5150_write_inittab(struct v4l2_subdev *sd,
|
|
|
const struct i2c_reg_value *regs)
|
|
|
{
|
|
|
while (regs->reg != 0xff) {
|
|
|
- tvp5150_write(c, regs->reg, regs->value);
|
|
|
+ tvp5150_write(sd, regs->reg, regs->value);
|
|
|
regs++;
|
|
|
}
|
|
|
return 0;
|
|
|
}
|
|
|
|
|
|
-static int tvp5150_vdp_init(struct i2c_client *c,
|
|
|
+static int tvp5150_vdp_init(struct v4l2_subdev *sd,
|
|
|
const struct i2c_vbi_ram_value *regs)
|
|
|
{
|
|
|
unsigned int i;
|
|
|
|
|
|
/* Disable Full Field */
|
|
|
- tvp5150_write(c, TVP5150_FULL_FIELD_ENA, 0);
|
|
|
+ tvp5150_write(sd, TVP5150_FULL_FIELD_ENA, 0);
|
|
|
|
|
|
/* Before programming, Line mode should be at 0xff */
|
|
|
- for (i=TVP5150_LINE_MODE_INI; i<=TVP5150_LINE_MODE_END; i++)
|
|
|
- tvp5150_write(c, i, 0xff);
|
|
|
+ for (i = TVP5150_LINE_MODE_INI; i <= TVP5150_LINE_MODE_END; i++)
|
|
|
+ tvp5150_write(sd, i, 0xff);
|
|
|
|
|
|
/* Load Ram Table */
|
|
|
- while (regs->reg != (u16)-1 ) {
|
|
|
- tvp5150_write(c, TVP5150_CONF_RAM_ADDR_HIGH,regs->reg>>8);
|
|
|
- tvp5150_write(c, TVP5150_CONF_RAM_ADDR_LOW,regs->reg);
|
|
|
+ while (regs->reg != (u16)-1) {
|
|
|
+ tvp5150_write(sd, TVP5150_CONF_RAM_ADDR_HIGH, regs->reg >> 8);
|
|
|
+ tvp5150_write(sd, TVP5150_CONF_RAM_ADDR_LOW, regs->reg);
|
|
|
|
|
|
- for (i=0;i<16;i++)
|
|
|
- tvp5150_write(c, TVP5150_VDP_CONF_RAM_DATA,regs->values[i]);
|
|
|
+ for (i = 0; i < 16; i++)
|
|
|
+ tvp5150_write(sd, TVP5150_VDP_CONF_RAM_DATA, regs->values[i]);
|
|
|
|
|
|
regs++;
|
|
|
}
|
|
@@ -629,11 +625,13 @@ static int tvp5150_vdp_init(struct i2c_client *c,
|
|
|
}
|
|
|
|
|
|
/* Fills VBI capabilities based on i2c_vbi_ram_value struct */
|
|
|
-static void tvp5150_vbi_get_cap(const struct i2c_vbi_ram_value *regs,
|
|
|
+static int tvp5150_g_sliced_vbi_cap(struct v4l2_subdev *sd,
|
|
|
struct v4l2_sliced_vbi_cap *cap)
|
|
|
{
|
|
|
+ const struct i2c_vbi_ram_value *regs = vbi_ram_default;
|
|
|
int line;
|
|
|
|
|
|
+ v4l2_dbg(1, debug, sd, "VIDIOC_G_SLICED_VBI_CAP\n");
|
|
|
memset(cap, 0, sizeof *cap);
|
|
|
|
|
|
while (regs->reg != (u16)-1 ) {
|
|
@@ -644,6 +642,7 @@ static void tvp5150_vbi_get_cap(const struct i2c_vbi_ram_value *regs,
|
|
|
|
|
|
regs++;
|
|
|
}
|
|
|
+ return 0;
|
|
|
}
|
|
|
|
|
|
/* Set vbi processing
|
|
@@ -659,18 +658,18 @@ static void tvp5150_vbi_get_cap(const struct i2c_vbi_ram_value *regs,
|
|
|
* LSB = field1
|
|
|
* MSB = field2
|
|
|
*/
|
|
|
-static int tvp5150_set_vbi(struct i2c_client *c,
|
|
|
+static int tvp5150_set_vbi(struct v4l2_subdev *sd,
|
|
|
const struct i2c_vbi_ram_value *regs,
|
|
|
unsigned int type,u8 flags, int line,
|
|
|
const int fields)
|
|
|
{
|
|
|
- struct tvp5150 *decoder = i2c_get_clientdata(c);
|
|
|
- v4l2_std_id std=decoder->norm;
|
|
|
+ struct tvp5150 *decoder = to_tvp5150(sd);
|
|
|
+ v4l2_std_id std = decoder->norm;
|
|
|
u8 reg;
|
|
|
int pos=0;
|
|
|
|
|
|
if (std == V4L2_STD_ALL) {
|
|
|
- tvp5150_err("VBI can't be configured without knowing number of lines\n");
|
|
|
+ v4l2_err(sd, "VBI can't be configured without knowing number of lines\n");
|
|
|
return 0;
|
|
|
} else if (std & V4L2_STD_625_50) {
|
|
|
/* Don't follow NTSC Line number convension */
|
|
@@ -698,163 +697,186 @@ static int tvp5150_set_vbi(struct i2c_client *c,
|
|
|
reg=((line-6)<<1)+TVP5150_LINE_MODE_INI;
|
|
|
|
|
|
if (fields&1) {
|
|
|
- tvp5150_write(c, reg, type);
|
|
|
+ tvp5150_write(sd, reg, type);
|
|
|
}
|
|
|
|
|
|
if (fields&2) {
|
|
|
- tvp5150_write(c, reg+1, type);
|
|
|
+ tvp5150_write(sd, reg+1, type);
|
|
|
}
|
|
|
|
|
|
return type;
|
|
|
}
|
|
|
|
|
|
-static int tvp5150_get_vbi(struct i2c_client *c,
|
|
|
+static int tvp5150_get_vbi(struct v4l2_subdev *sd,
|
|
|
const struct i2c_vbi_ram_value *regs, int line)
|
|
|
{
|
|
|
- struct tvp5150 *decoder = i2c_get_clientdata(c);
|
|
|
- v4l2_std_id std=decoder->norm;
|
|
|
+ struct tvp5150 *decoder = to_tvp5150(sd);
|
|
|
+ v4l2_std_id std = decoder->norm;
|
|
|
u8 reg;
|
|
|
- int pos, type=0;
|
|
|
+ int pos, type = 0;
|
|
|
|
|
|
if (std == V4L2_STD_ALL) {
|
|
|
- tvp5150_err("VBI can't be configured without knowing number of lines\n");
|
|
|
+ v4l2_err(sd, "VBI can't be configured without knowing number of lines\n");
|
|
|
return 0;
|
|
|
} else if (std & V4L2_STD_625_50) {
|
|
|
/* Don't follow NTSC Line number convension */
|
|
|
line += 3;
|
|
|
}
|
|
|
|
|
|
- if (line<6||line>27)
|
|
|
+ if (line < 6 || line > 27)
|
|
|
return 0;
|
|
|
|
|
|
- reg=((line-6)<<1)+TVP5150_LINE_MODE_INI;
|
|
|
+ reg = ((line - 6) << 1) + TVP5150_LINE_MODE_INI;
|
|
|
|
|
|
- pos=tvp5150_read(c, reg)&0x0f;
|
|
|
- if (pos<0x0f)
|
|
|
- type=regs[pos].type.vbi_type;
|
|
|
+ pos = tvp5150_read(sd, reg) & 0x0f;
|
|
|
+ if (pos < 0x0f)
|
|
|
+ type = regs[pos].type.vbi_type;
|
|
|
|
|
|
- pos=tvp5150_read(c, reg+1)&0x0f;
|
|
|
- if (pos<0x0f)
|
|
|
- type|=regs[pos].type.vbi_type;
|
|
|
+ pos = tvp5150_read(sd, reg + 1) & 0x0f;
|
|
|
+ if (pos < 0x0f)
|
|
|
+ type |= regs[pos].type.vbi_type;
|
|
|
|
|
|
return type;
|
|
|
}
|
|
|
-static int tvp5150_set_std(struct i2c_client *c, v4l2_std_id std)
|
|
|
+
|
|
|
+static int tvp5150_set_std(struct v4l2_subdev *sd, v4l2_std_id std)
|
|
|
{
|
|
|
- struct tvp5150 *decoder = i2c_get_clientdata(c);
|
|
|
- int fmt=0;
|
|
|
+ struct tvp5150 *decoder = to_tvp5150(sd);
|
|
|
+ int fmt = 0;
|
|
|
|
|
|
- decoder->norm=std;
|
|
|
+ decoder->norm = std;
|
|
|
|
|
|
/* First tests should be against specific std */
|
|
|
|
|
|
if (std == V4L2_STD_ALL) {
|
|
|
- fmt=0; /* Autodetect mode */
|
|
|
+ fmt = 0; /* Autodetect mode */
|
|
|
} else if (std & V4L2_STD_NTSC_443) {
|
|
|
- fmt=0xa;
|
|
|
+ fmt = 0xa;
|
|
|
} else if (std & V4L2_STD_PAL_M) {
|
|
|
- fmt=0x6;
|
|
|
- } else if (std & (V4L2_STD_PAL_N| V4L2_STD_PAL_Nc)) {
|
|
|
- fmt=0x8;
|
|
|
+ fmt = 0x6;
|
|
|
+ } else if (std & (V4L2_STD_PAL_N | V4L2_STD_PAL_Nc)) {
|
|
|
+ fmt = 0x8;
|
|
|
} else {
|
|
|
/* Then, test against generic ones */
|
|
|
- if (std & V4L2_STD_NTSC) {
|
|
|
- fmt=0x2;
|
|
|
- } else if (std & V4L2_STD_PAL) {
|
|
|
- fmt=0x4;
|
|
|
- } else if (std & V4L2_STD_SECAM) {
|
|
|
- fmt=0xc;
|
|
|
- }
|
|
|
+ if (std & V4L2_STD_NTSC)
|
|
|
+ fmt = 0x2;
|
|
|
+ else if (std & V4L2_STD_PAL)
|
|
|
+ fmt = 0x4;
|
|
|
+ else if (std & V4L2_STD_SECAM)
|
|
|
+ fmt = 0xc;
|
|
|
}
|
|
|
|
|
|
- tvp5150_dbg(1,"Set video std register to %d.\n",fmt);
|
|
|
- tvp5150_write(c, TVP5150_VIDEO_STD, fmt);
|
|
|
-
|
|
|
+ v4l2_dbg(1, debug, sd, "Set video std register to %d.\n", fmt);
|
|
|
+ tvp5150_write(sd, TVP5150_VIDEO_STD, fmt);
|
|
|
return 0;
|
|
|
}
|
|
|
|
|
|
-static inline void tvp5150_reset(struct i2c_client *c)
|
|
|
+static int tvp5150_s_std(struct v4l2_subdev *sd, v4l2_std_id std)
|
|
|
+{
|
|
|
+ struct tvp5150 *decoder = to_tvp5150(sd);
|
|
|
+
|
|
|
+ if (decoder->norm == std)
|
|
|
+ return 0;
|
|
|
+
|
|
|
+ return tvp5150_set_std(sd, std);
|
|
|
+}
|
|
|
+
|
|
|
+static int tvp5150_reset(struct v4l2_subdev *sd, u32 val)
|
|
|
{
|
|
|
+ struct tvp5150 *decoder = to_tvp5150(sd);
|
|
|
u8 msb_id, lsb_id, msb_rom, lsb_rom;
|
|
|
- struct tvp5150 *decoder = i2c_get_clientdata(c);
|
|
|
|
|
|
- msb_id=tvp5150_read(c,TVP5150_MSB_DEV_ID);
|
|
|
- lsb_id=tvp5150_read(c,TVP5150_LSB_DEV_ID);
|
|
|
- msb_rom=tvp5150_read(c,TVP5150_ROM_MAJOR_VER);
|
|
|
- lsb_rom=tvp5150_read(c,TVP5150_ROM_MINOR_VER);
|
|
|
+ msb_id = tvp5150_read(sd, TVP5150_MSB_DEV_ID);
|
|
|
+ lsb_id = tvp5150_read(sd, TVP5150_LSB_DEV_ID);
|
|
|
+ msb_rom = tvp5150_read(sd, TVP5150_ROM_MAJOR_VER);
|
|
|
+ lsb_rom = tvp5150_read(sd, TVP5150_ROM_MINOR_VER);
|
|
|
|
|
|
- if ((msb_rom==4)&&(lsb_rom==0)) { /* Is TVP5150AM1 */
|
|
|
- tvp5150_info("tvp%02x%02xam1 detected.\n",msb_id, lsb_id);
|
|
|
+ if (msb_rom == 4 && lsb_rom == 0) { /* Is TVP5150AM1 */
|
|
|
+ v4l2_info(sd, "tvp%02x%02xam1 detected.\n", msb_id, lsb_id);
|
|
|
|
|
|
/* ITU-T BT.656.4 timing */
|
|
|
- tvp5150_write(c,TVP5150_REV_SELECT,0);
|
|
|
+ tvp5150_write(sd, TVP5150_REV_SELECT, 0);
|
|
|
} else {
|
|
|
- if ((msb_rom==3)||(lsb_rom==0x21)) { /* Is TVP5150A */
|
|
|
- tvp5150_info("tvp%02x%02xa detected.\n",msb_id, lsb_id);
|
|
|
+ if (msb_rom == 3 || lsb_rom == 0x21) { /* Is TVP5150A */
|
|
|
+ v4l2_info(sd, "tvp%02x%02xa detected.\n", msb_id, lsb_id);
|
|
|
} else {
|
|
|
- tvp5150_info("*** unknown tvp%02x%02x chip detected.\n",msb_id,lsb_id);
|
|
|
- tvp5150_info("*** Rom ver is %d.%d\n",msb_rom,lsb_rom);
|
|
|
+ v4l2_info(sd, "*** unknown tvp%02x%02x chip detected.\n",
|
|
|
+ msb_id, lsb_id);
|
|
|
+ v4l2_info(sd, "*** Rom ver is %d.%d\n", msb_rom, lsb_rom);
|
|
|
}
|
|
|
}
|
|
|
|
|
|
/* Initializes TVP5150 to its default values */
|
|
|
- tvp5150_write_inittab(c, tvp5150_init_default);
|
|
|
+ tvp5150_write_inittab(sd, tvp5150_init_default);
|
|
|
|
|
|
/* Initializes VDP registers */
|
|
|
- tvp5150_vdp_init(c, vbi_ram_default);
|
|
|
+ tvp5150_vdp_init(sd, vbi_ram_default);
|
|
|
|
|
|
/* Selects decoder input */
|
|
|
- tvp5150_selmux(c);
|
|
|
+ tvp5150_selmux(sd);
|
|
|
|
|
|
/* Initializes TVP5150 to stream enabled values */
|
|
|
- tvp5150_write_inittab(c, tvp5150_init_enable);
|
|
|
+ tvp5150_write_inittab(sd, tvp5150_init_enable);
|
|
|
|
|
|
/* Initialize image preferences */
|
|
|
- tvp5150_write(c, TVP5150_BRIGHT_CTL, decoder->bright);
|
|
|
- tvp5150_write(c, TVP5150_CONTRAST_CTL, decoder->contrast);
|
|
|
- tvp5150_write(c, TVP5150_SATURATION_CTL, decoder->contrast);
|
|
|
- tvp5150_write(c, TVP5150_HUE_CTL, decoder->hue);
|
|
|
+ tvp5150_write(sd, TVP5150_BRIGHT_CTL, decoder->bright);
|
|
|
+ tvp5150_write(sd, TVP5150_CONTRAST_CTL, decoder->contrast);
|
|
|
+ tvp5150_write(sd, TVP5150_SATURATION_CTL, decoder->contrast);
|
|
|
+ tvp5150_write(sd, TVP5150_HUE_CTL, decoder->hue);
|
|
|
|
|
|
- tvp5150_set_std(c, decoder->norm);
|
|
|
+ tvp5150_set_std(sd, decoder->norm);
|
|
|
+ return 0;
|
|
|
};
|
|
|
|
|
|
-static int tvp5150_get_ctrl(struct i2c_client *c, struct v4l2_control *ctrl)
|
|
|
+static int tvp5150_g_ctrl(struct v4l2_subdev *sd, struct v4l2_control *ctrl)
|
|
|
{
|
|
|
-/* struct tvp5150 *decoder = i2c_get_clientdata(c); */
|
|
|
+ v4l2_dbg(1, debug, sd, "VIDIOC_G_CTRL called\n");
|
|
|
|
|
|
switch (ctrl->id) {
|
|
|
case V4L2_CID_BRIGHTNESS:
|
|
|
- ctrl->value = tvp5150_read(c, TVP5150_BRIGHT_CTL);
|
|
|
+ ctrl->value = tvp5150_read(sd, TVP5150_BRIGHT_CTL);
|
|
|
return 0;
|
|
|
case V4L2_CID_CONTRAST:
|
|
|
- ctrl->value = tvp5150_read(c, TVP5150_CONTRAST_CTL);
|
|
|
+ ctrl->value = tvp5150_read(sd, TVP5150_CONTRAST_CTL);
|
|
|
return 0;
|
|
|
case V4L2_CID_SATURATION:
|
|
|
- ctrl->value = tvp5150_read(c, TVP5150_SATURATION_CTL);
|
|
|
+ ctrl->value = tvp5150_read(sd, TVP5150_SATURATION_CTL);
|
|
|
return 0;
|
|
|
case V4L2_CID_HUE:
|
|
|
- ctrl->value = tvp5150_read(c, TVP5150_HUE_CTL);
|
|
|
+ ctrl->value = tvp5150_read(sd, TVP5150_HUE_CTL);
|
|
|
return 0;
|
|
|
}
|
|
|
return -EINVAL;
|
|
|
}
|
|
|
|
|
|
-static int tvp5150_set_ctrl(struct i2c_client *c, struct v4l2_control *ctrl)
|
|
|
+static int tvp5150_s_ctrl(struct v4l2_subdev *sd, struct v4l2_control *ctrl)
|
|
|
{
|
|
|
-/* struct tvp5150 *decoder = i2c_get_clientdata(c); */
|
|
|
+ u8 i, n;
|
|
|
+ n = ARRAY_SIZE(tvp5150_qctrl);
|
|
|
+
|
|
|
+ for (i = 0; i < n; i++) {
|
|
|
+ if (ctrl->id != tvp5150_qctrl[i].id)
|
|
|
+ continue;
|
|
|
+ if (ctrl->value < tvp5150_qctrl[i].minimum ||
|
|
|
+ ctrl->value > tvp5150_qctrl[i].maximum)
|
|
|
+ return -ERANGE;
|
|
|
+ v4l2_dbg(1, debug, sd, "VIDIOC_S_CTRL: id=%d, value=%d\n",
|
|
|
+ ctrl->id, ctrl->value);
|
|
|
+ break;
|
|
|
+ }
|
|
|
|
|
|
switch (ctrl->id) {
|
|
|
case V4L2_CID_BRIGHTNESS:
|
|
|
- tvp5150_write(c, TVP5150_BRIGHT_CTL, ctrl->value);
|
|
|
+ tvp5150_write(sd, TVP5150_BRIGHT_CTL, ctrl->value);
|
|
|
return 0;
|
|
|
case V4L2_CID_CONTRAST:
|
|
|
- tvp5150_write(c, TVP5150_CONTRAST_CTL, ctrl->value);
|
|
|
+ tvp5150_write(sd, TVP5150_CONTRAST_CTL, ctrl->value);
|
|
|
return 0;
|
|
|
case V4L2_CID_SATURATION:
|
|
|
- tvp5150_write(c, TVP5150_SATURATION_CTL, ctrl->value);
|
|
|
+ tvp5150_write(sd, TVP5150_SATURATION_CTL, ctrl->value);
|
|
|
return 0;
|
|
|
case V4L2_CID_HUE:
|
|
|
- tvp5150_write(c, TVP5150_HUE_CTL, ctrl->value);
|
|
|
+ tvp5150_write(sd, TVP5150_HUE_CTL, ctrl->value);
|
|
|
return 0;
|
|
|
}
|
|
|
return -EINVAL;
|
|
@@ -863,242 +885,195 @@ static int tvp5150_set_ctrl(struct i2c_client *c, struct v4l2_control *ctrl)
|
|
|
/****************************************************************************
|
|
|
I2C Command
|
|
|
****************************************************************************/
|
|
|
-static int tvp5150_command(struct i2c_client *c,
|
|
|
- unsigned int cmd, void *arg)
|
|
|
-{
|
|
|
- struct tvp5150 *decoder = i2c_get_clientdata(c);
|
|
|
-
|
|
|
- switch (cmd) {
|
|
|
-
|
|
|
- case 0:
|
|
|
- case VIDIOC_INT_RESET:
|
|
|
- tvp5150_reset(c);
|
|
|
- break;
|
|
|
- case VIDIOC_INT_G_VIDEO_ROUTING:
|
|
|
- {
|
|
|
- struct v4l2_routing *route = arg;
|
|
|
|
|
|
- *route = decoder->route;
|
|
|
- break;
|
|
|
- }
|
|
|
- case VIDIOC_INT_S_VIDEO_ROUTING:
|
|
|
- {
|
|
|
- struct v4l2_routing *route = arg;
|
|
|
-
|
|
|
- decoder->route = *route;
|
|
|
- tvp5150_selmux(c);
|
|
|
- break;
|
|
|
- }
|
|
|
- case VIDIOC_S_STD:
|
|
|
- if (decoder->norm == *(v4l2_std_id *)arg)
|
|
|
- break;
|
|
|
- return tvp5150_set_std(c, *(v4l2_std_id *)arg);
|
|
|
- case VIDIOC_G_STD:
|
|
|
- *(v4l2_std_id *)arg = decoder->norm;
|
|
|
- break;
|
|
|
+static int tvp5150_s_routing(struct v4l2_subdev *sd, const struct v4l2_routing *route)
|
|
|
+{
|
|
|
+ struct tvp5150 *decoder = to_tvp5150(sd);
|
|
|
|
|
|
- case VIDIOC_G_SLICED_VBI_CAP:
|
|
|
- {
|
|
|
- struct v4l2_sliced_vbi_cap *cap = arg;
|
|
|
- tvp5150_dbg(1, "VIDIOC_G_SLICED_VBI_CAP\n");
|
|
|
+ decoder->route = *route;
|
|
|
+ tvp5150_selmux(sd);
|
|
|
+ return 0;
|
|
|
+}
|
|
|
|
|
|
- tvp5150_vbi_get_cap(vbi_ram_default, cap);
|
|
|
- break;
|
|
|
+static int tvp5150_s_fmt(struct v4l2_subdev *sd, struct v4l2_format *fmt)
|
|
|
+{
|
|
|
+ struct v4l2_sliced_vbi_format *svbi;
|
|
|
+ int i;
|
|
|
+
|
|
|
+ /* raw vbi */
|
|
|
+ if (fmt->type == V4L2_BUF_TYPE_VBI_CAPTURE) {
|
|
|
+ /* this is for capturing 36 raw vbi lines
|
|
|
+ if there's a way to cut off the beginning 2 vbi lines
|
|
|
+ with the tvp5150 then the vbi line count could be lowered
|
|
|
+ to 17 lines/field again, although I couldn't find a register
|
|
|
+ which could do that cropping */
|
|
|
+ if (fmt->fmt.vbi.sample_format == V4L2_PIX_FMT_GREY)
|
|
|
+ tvp5150_write(sd, TVP5150_LUMA_PROC_CTL_1, 0x70);
|
|
|
+ if (fmt->fmt.vbi.count[0] == 18 && fmt->fmt.vbi.count[1] == 18) {
|
|
|
+ tvp5150_write(sd, TVP5150_VERT_BLANKING_START, 0x00);
|
|
|
+ tvp5150_write(sd, TVP5150_VERT_BLANKING_STOP, 0x01);
|
|
|
+ }
|
|
|
+ return 0;
|
|
|
}
|
|
|
- case VIDIOC_S_FMT:
|
|
|
- {
|
|
|
- struct v4l2_format *fmt;
|
|
|
- struct v4l2_sliced_vbi_format *svbi;
|
|
|
- int i;
|
|
|
-
|
|
|
- fmt = arg;
|
|
|
- /* raw vbi */
|
|
|
- if (fmt->type == V4L2_BUF_TYPE_VBI_CAPTURE) {
|
|
|
- /* this is for capturing 36 raw vbi lines
|
|
|
- if there's a way to cut off the beginning 2 vbi lines
|
|
|
- with the tvp5150 then the vbi line count could be lowered
|
|
|
- to 17 lines/field again, although I couldn't find a register
|
|
|
- which could do that cropping */
|
|
|
- if (fmt->fmt.vbi.sample_format == V4L2_PIX_FMT_GREY)
|
|
|
- tvp5150_write(c, TVP5150_LUMA_PROC_CTL_1, 0x70);
|
|
|
- if (fmt->fmt.vbi.count[0] == 18 && fmt->fmt.vbi.count[1] == 18) {
|
|
|
- tvp5150_write(c, TVP5150_VERT_BLANKING_START, 0x00);
|
|
|
- tvp5150_write(c, TVP5150_VERT_BLANKING_STOP, 0x01);
|
|
|
- }
|
|
|
- break;
|
|
|
+ if (fmt->type != V4L2_BUF_TYPE_SLICED_VBI_CAPTURE)
|
|
|
+ return -EINVAL;
|
|
|
+ svbi = &fmt->fmt.sliced;
|
|
|
+ if (svbi->service_set != 0) {
|
|
|
+ for (i = 0; i <= 23; i++) {
|
|
|
+ svbi->service_lines[1][i] = 0;
|
|
|
+ svbi->service_lines[0][i] =
|
|
|
+ tvp5150_set_vbi(sd, vbi_ram_default,
|
|
|
+ svbi->service_lines[0][i], 0xf0, i, 3);
|
|
|
}
|
|
|
- if (fmt->type != V4L2_BUF_TYPE_SLICED_VBI_CAPTURE)
|
|
|
- return -EINVAL;
|
|
|
- svbi = &fmt->fmt.sliced;
|
|
|
- if (svbi->service_set != 0) {
|
|
|
- for (i = 0; i <= 23; i++) {
|
|
|
- svbi->service_lines[1][i] = 0;
|
|
|
-
|
|
|
- svbi->service_lines[0][i]=tvp5150_set_vbi(c,
|
|
|
- vbi_ram_default,
|
|
|
- svbi->service_lines[0][i],0xf0,i,3);
|
|
|
- }
|
|
|
- /* Enables FIFO */
|
|
|
- tvp5150_write(c, TVP5150_FIFO_OUT_CTRL,1);
|
|
|
- } else {
|
|
|
- /* Disables FIFO*/
|
|
|
- tvp5150_write(c, TVP5150_FIFO_OUT_CTRL,0);
|
|
|
+ /* Enables FIFO */
|
|
|
+ tvp5150_write(sd, TVP5150_FIFO_OUT_CTRL, 1);
|
|
|
+ } else {
|
|
|
+ /* Disables FIFO*/
|
|
|
+ tvp5150_write(sd, TVP5150_FIFO_OUT_CTRL, 0);
|
|
|
|
|
|
- /* Disable Full Field */
|
|
|
- tvp5150_write(c, TVP5150_FULL_FIELD_ENA, 0);
|
|
|
+ /* Disable Full Field */
|
|
|
+ tvp5150_write(sd, TVP5150_FULL_FIELD_ENA, 0);
|
|
|
|
|
|
- /* Disable Line modes */
|
|
|
- for (i=TVP5150_LINE_MODE_INI; i<=TVP5150_LINE_MODE_END; i++)
|
|
|
- tvp5150_write(c, i, 0xff);
|
|
|
- }
|
|
|
- break;
|
|
|
+ /* Disable Line modes */
|
|
|
+ for (i = TVP5150_LINE_MODE_INI; i <= TVP5150_LINE_MODE_END; i++)
|
|
|
+ tvp5150_write(sd, i, 0xff);
|
|
|
}
|
|
|
- case VIDIOC_G_FMT:
|
|
|
- {
|
|
|
- struct v4l2_format *fmt;
|
|
|
- struct v4l2_sliced_vbi_format *svbi;
|
|
|
+ return 0;
|
|
|
+}
|
|
|
|
|
|
- int i, mask=0;
|
|
|
+static int tvp5150_g_fmt(struct v4l2_subdev *sd, struct v4l2_format *fmt)
|
|
|
+{
|
|
|
+ struct v4l2_sliced_vbi_format *svbi;
|
|
|
+ int i, mask = 0;
|
|
|
|
|
|
- fmt = arg;
|
|
|
- if (fmt->type != V4L2_BUF_TYPE_SLICED_VBI_CAPTURE)
|
|
|
- return -EINVAL;
|
|
|
- svbi = &fmt->fmt.sliced;
|
|
|
- memset(svbi, 0, sizeof(*svbi));
|
|
|
+ if (fmt->type != V4L2_BUF_TYPE_SLICED_VBI_CAPTURE)
|
|
|
+ return -EINVAL;
|
|
|
+ svbi = &fmt->fmt.sliced;
|
|
|
+ memset(svbi, 0, sizeof(*svbi));
|
|
|
|
|
|
- for (i = 0; i <= 23; i++) {
|
|
|
- svbi->service_lines[0][i]=tvp5150_get_vbi(c,
|
|
|
- vbi_ram_default,i);
|
|
|
- mask|=svbi->service_lines[0][i];
|
|
|
- }
|
|
|
- svbi->service_set=mask;
|
|
|
- break;
|
|
|
+ for (i = 0; i <= 23; i++) {
|
|
|
+ svbi->service_lines[0][i] =
|
|
|
+ tvp5150_get_vbi(sd, vbi_ram_default, i);
|
|
|
+ mask |= svbi->service_lines[0][i];
|
|
|
}
|
|
|
+ svbi->service_set = mask;
|
|
|
+ return 0;
|
|
|
+}
|
|
|
+
|
|
|
|
|
|
#ifdef CONFIG_VIDEO_ADV_DEBUG
|
|
|
- case VIDIOC_DBG_G_REGISTER:
|
|
|
- case VIDIOC_DBG_S_REGISTER:
|
|
|
- {
|
|
|
- struct v4l2_register *reg = arg;
|
|
|
-
|
|
|
- if (!v4l2_chip_match_i2c_client(c, reg->match_type, reg->match_chip))
|
|
|
- return -EINVAL;
|
|
|
- if (!capable(CAP_SYS_ADMIN))
|
|
|
- return -EPERM;
|
|
|
- if (cmd == VIDIOC_DBG_G_REGISTER)
|
|
|
- reg->val = tvp5150_read(c, reg->reg & 0xff);
|
|
|
- else
|
|
|
- tvp5150_write(c, reg->reg & 0xff, reg->val & 0xff);
|
|
|
- break;
|
|
|
- }
|
|
|
-#endif
|
|
|
+static int tvp5150_g_register(struct v4l2_subdev *sd, struct v4l2_register *reg)
|
|
|
+{
|
|
|
+ struct i2c_client *client = v4l2_get_subdevdata(sd);
|
|
|
|
|
|
- case VIDIOC_LOG_STATUS:
|
|
|
- dump_reg(c);
|
|
|
- break;
|
|
|
+ if (!v4l2_chip_match_i2c_client(client,
|
|
|
+ reg->match_type, reg->match_chip))
|
|
|
+ return -EINVAL;
|
|
|
+ if (!capable(CAP_SYS_ADMIN))
|
|
|
+ return -EPERM;
|
|
|
+ reg->val = tvp5150_read(sd, reg->reg & 0xff);
|
|
|
+ return 0;
|
|
|
+}
|
|
|
|
|
|
- case VIDIOC_G_TUNER:
|
|
|
- {
|
|
|
- struct v4l2_tuner *vt = arg;
|
|
|
- int status = tvp5150_read(c, 0x88);
|
|
|
+static int tvp5150_s_register(struct v4l2_subdev *sd, struct v4l2_register *reg)
|
|
|
+{
|
|
|
+ struct i2c_client *client = v4l2_get_subdevdata(sd);
|
|
|
|
|
|
- vt->signal = ((status & 0x04) && (status & 0x02)) ? 0xffff : 0x0;
|
|
|
- break;
|
|
|
- }
|
|
|
- case VIDIOC_QUERYCTRL:
|
|
|
- {
|
|
|
- struct v4l2_queryctrl *qc = arg;
|
|
|
- int i;
|
|
|
+ if (!v4l2_chip_match_i2c_client(client,
|
|
|
+ reg->match_type, reg->match_chip))
|
|
|
+ return -EINVAL;
|
|
|
+ if (!capable(CAP_SYS_ADMIN))
|
|
|
+ return -EPERM;
|
|
|
+ tvp5150_write(sd, reg->reg & 0xff, reg->val & 0xff);
|
|
|
+ return 0;
|
|
|
+}
|
|
|
+#endif
|
|
|
|
|
|
- tvp5150_dbg(1, "VIDIOC_QUERYCTRL called\n");
|
|
|
+static int tvp5150_g_tuner(struct v4l2_subdev *sd, struct v4l2_tuner *vt)
|
|
|
+{
|
|
|
+ int status = tvp5150_read(sd, 0x88);
|
|
|
|
|
|
- for (i = 0; i < ARRAY_SIZE(tvp5150_qctrl); i++)
|
|
|
- if (qc->id && qc->id == tvp5150_qctrl[i].id) {
|
|
|
- memcpy(qc, &(tvp5150_qctrl[i]),
|
|
|
- sizeof(*qc));
|
|
|
- return 0;
|
|
|
- }
|
|
|
+ vt->signal = ((status & 0x04) && (status & 0x02)) ? 0xffff : 0x0;
|
|
|
+ return 0;
|
|
|
+}
|
|
|
|
|
|
- return -EINVAL;
|
|
|
- }
|
|
|
- case VIDIOC_G_CTRL:
|
|
|
- {
|
|
|
- struct v4l2_control *ctrl = arg;
|
|
|
- tvp5150_dbg(1, "VIDIOC_G_CTRL called\n");
|
|
|
+static int tvp5150_queryctrl(struct v4l2_subdev *sd, struct v4l2_queryctrl *qc)
|
|
|
+{
|
|
|
+ int i;
|
|
|
|
|
|
- return tvp5150_get_ctrl(c, ctrl);
|
|
|
- }
|
|
|
- case VIDIOC_S_CTRL:
|
|
|
- {
|
|
|
- struct v4l2_control *ctrl = arg;
|
|
|
- u8 i, n;
|
|
|
- n = ARRAY_SIZE(tvp5150_qctrl);
|
|
|
- for (i = 0; i < n; i++)
|
|
|
- if (ctrl->id == tvp5150_qctrl[i].id) {
|
|
|
- if (ctrl->value <
|
|
|
- tvp5150_qctrl[i].minimum
|
|
|
- || ctrl->value >
|
|
|
- tvp5150_qctrl[i].maximum)
|
|
|
- return -ERANGE;
|
|
|
- tvp5150_dbg(1,
|
|
|
- "VIDIOC_S_CTRL: id=%d, value=%d\n",
|
|
|
- ctrl->id, ctrl->value);
|
|
|
- return tvp5150_set_ctrl(c, ctrl);
|
|
|
- }
|
|
|
- return -EINVAL;
|
|
|
+ v4l2_dbg(1, debug, sd, "VIDIOC_QUERYCTRL called\n");
|
|
|
+
|
|
|
+ for (i = 0; i < ARRAY_SIZE(tvp5150_qctrl); i++)
|
|
|
+ if (qc->id && qc->id == tvp5150_qctrl[i].id) {
|
|
|
+ memcpy(qc, &(tvp5150_qctrl[i]),
|
|
|
+ sizeof(*qc));
|
|
|
+ return 0;
|
|
|
}
|
|
|
|
|
|
- default:
|
|
|
- return -EINVAL;
|
|
|
- }
|
|
|
+ return -EINVAL;
|
|
|
+}
|
|
|
|
|
|
- return 0;
|
|
|
+static int tvp5150_command(struct i2c_client *client, unsigned cmd, void *arg)
|
|
|
+{
|
|
|
+ return v4l2_subdev_command(i2c_get_clientdata(client), cmd, arg);
|
|
|
}
|
|
|
|
|
|
+/* ----------------------------------------------------------------------- */
|
|
|
+
|
|
|
+static const struct v4l2_subdev_core_ops tvp5150_core_ops = {
|
|
|
+ .log_status = tvp5150_log_status,
|
|
|
+ .g_ctrl = tvp5150_g_ctrl,
|
|
|
+ .s_ctrl = tvp5150_s_ctrl,
|
|
|
+ .queryctrl = tvp5150_queryctrl,
|
|
|
+ .reset = tvp5150_reset,
|
|
|
+#ifdef CONFIG_VIDEO_ADV_DEBUG
|
|
|
+ .g_register = tvp5150_g_register,
|
|
|
+ .s_register = tvp5150_s_register,
|
|
|
+#endif
|
|
|
+};
|
|
|
+
|
|
|
+static const struct v4l2_subdev_tuner_ops tvp5150_tuner_ops = {
|
|
|
+ .s_std = tvp5150_s_std,
|
|
|
+ .g_tuner = tvp5150_g_tuner,
|
|
|
+};
|
|
|
+
|
|
|
+static const struct v4l2_subdev_video_ops tvp5150_video_ops = {
|
|
|
+ .s_routing = tvp5150_s_routing,
|
|
|
+ .g_fmt = tvp5150_g_fmt,
|
|
|
+ .s_fmt = tvp5150_s_fmt,
|
|
|
+ .g_sliced_vbi_cap = tvp5150_g_sliced_vbi_cap,
|
|
|
+};
|
|
|
+
|
|
|
+static const struct v4l2_subdev_ops tvp5150_ops = {
|
|
|
+ .core = &tvp5150_core_ops,
|
|
|
+ .tuner = &tvp5150_tuner_ops,
|
|
|
+ .video = &tvp5150_video_ops,
|
|
|
+};
|
|
|
+
|
|
|
+
|
|
|
/****************************************************************************
|
|
|
I2C Client & Driver
|
|
|
****************************************************************************/
|
|
|
-static struct i2c_driver driver;
|
|
|
-
|
|
|
-static struct i2c_client client_template = {
|
|
|
- .name = "(unset)",
|
|
|
- .driver = &driver,
|
|
|
-};
|
|
|
|
|
|
-static int tvp5150_detect_client(struct i2c_adapter *adapter,
|
|
|
- int address, int kind)
|
|
|
+static int tvp5150_probe(struct i2c_client *c,
|
|
|
+ const struct i2c_device_id *id)
|
|
|
{
|
|
|
- struct i2c_client *c;
|
|
|
struct tvp5150 *core;
|
|
|
- int rv;
|
|
|
-
|
|
|
- if (debug)
|
|
|
- printk( KERN_INFO
|
|
|
- "tvp5150.c: detecting tvp5150 client on address 0x%x\n",
|
|
|
- address << 1);
|
|
|
-
|
|
|
- client_template.adapter = adapter;
|
|
|
- client_template.addr = address;
|
|
|
+ struct v4l2_subdev *sd;
|
|
|
|
|
|
/* Check if the adapter supports the needed features */
|
|
|
- if (!i2c_check_functionality
|
|
|
- (adapter,
|
|
|
+ if (!i2c_check_functionality(c->adapter,
|
|
|
I2C_FUNC_SMBUS_READ_BYTE | I2C_FUNC_SMBUS_WRITE_BYTE_DATA))
|
|
|
- return 0;
|
|
|
-
|
|
|
- c = kmalloc(sizeof(struct i2c_client), GFP_KERNEL);
|
|
|
- if (!c)
|
|
|
- return -ENOMEM;
|
|
|
- memcpy(c, &client_template, sizeof(struct i2c_client));
|
|
|
+ return -EIO;
|
|
|
|
|
|
core = kzalloc(sizeof(struct tvp5150), GFP_KERNEL);
|
|
|
if (!core) {
|
|
|
- kfree(c);
|
|
|
return -ENOMEM;
|
|
|
}
|
|
|
- i2c_set_clientdata(c, core);
|
|
|
-
|
|
|
- rv = i2c_attach_client(c);
|
|
|
+ sd = &core->sd;
|
|
|
+ v4l2_i2c_subdev_init(sd, c, &tvp5150_ops);
|
|
|
+ v4l_info(c, "chip found @ 0x%02x (%s)\n",
|
|
|
+ c->addr << 1, c->adapter->name);
|
|
|
|
|
|
core->norm = V4L2_STD_ALL; /* Default is autodetect */
|
|
|
core->route.input = TVP5150_COMPOSITE1;
|
|
@@ -1108,69 +1083,38 @@ static int tvp5150_detect_client(struct i2c_adapter *adapter,
|
|
|
core->hue = 0;
|
|
|
core->sat = 128;
|
|
|
|
|
|
- if (rv) {
|
|
|
- kfree(c);
|
|
|
- kfree(core);
|
|
|
- return rv;
|
|
|
- }
|
|
|
-
|
|
|
if (debug > 1)
|
|
|
- dump_reg(c);
|
|
|
+ tvp5150_log_status(sd);
|
|
|
return 0;
|
|
|
}
|
|
|
|
|
|
-static int tvp5150_attach_adapter(struct i2c_adapter *adapter)
|
|
|
+static int tvp5150_remove(struct i2c_client *c)
|
|
|
{
|
|
|
- if (debug)
|
|
|
- printk( KERN_INFO
|
|
|
- "tvp5150.c: starting probe for adapter %s (0x%x)\n",
|
|
|
- adapter->name, adapter->id);
|
|
|
- return i2c_probe(adapter, &addr_data, &tvp5150_detect_client);
|
|
|
-}
|
|
|
-
|
|
|
-static int tvp5150_detach_client(struct i2c_client *c)
|
|
|
-{
|
|
|
- struct tvp5150 *decoder = i2c_get_clientdata(c);
|
|
|
- int err;
|
|
|
+ struct v4l2_subdev *sd = i2c_get_clientdata(c);
|
|
|
|
|
|
- tvp5150_dbg(1,
|
|
|
+ v4l2_dbg(1, debug, sd,
|
|
|
"tvp5150.c: removing tvp5150 adapter on address 0x%x\n",
|
|
|
c->addr << 1);
|
|
|
|
|
|
- err = i2c_detach_client(c);
|
|
|
- if (err) {
|
|
|
- return err;
|
|
|
- }
|
|
|
-
|
|
|
- kfree(decoder);
|
|
|
- kfree(c);
|
|
|
-
|
|
|
+ v4l2_device_unregister_subdev(sd);
|
|
|
+ kfree(to_tvp5150(sd));
|
|
|
return 0;
|
|
|
}
|
|
|
|
|
|
/* ----------------------------------------------------------------------- */
|
|
|
|
|
|
-static struct i2c_driver driver = {
|
|
|
- .driver = {
|
|
|
- .name = "tvp5150",
|
|
|
- },
|
|
|
- .id = I2C_DRIVERID_TVP5150,
|
|
|
-
|
|
|
- .attach_adapter = tvp5150_attach_adapter,
|
|
|
- .detach_client = tvp5150_detach_client,
|
|
|
+static const struct i2c_device_id tvp5150_id[] = {
|
|
|
+ { "tvp5150", 0 },
|
|
|
+ { }
|
|
|
+};
|
|
|
+MODULE_DEVICE_TABLE(i2c, tvp5150_id);
|
|
|
|
|
|
+static struct v4l2_i2c_driver_data v4l2_i2c_data = {
|
|
|
+ .name = "tvp5150",
|
|
|
+ .driverid = I2C_DRIVERID_TVP5150,
|
|
|
.command = tvp5150_command,
|
|
|
+ .probe = tvp5150_probe,
|
|
|
+ .remove = tvp5150_remove,
|
|
|
+ .legacy_class = I2C_CLASS_TV_ANALOG | I2C_CLASS_TV_DIGITAL,
|
|
|
+ .id_table = tvp5150_id,
|
|
|
};
|
|
|
-
|
|
|
-static int __init tvp5150_init(void)
|
|
|
-{
|
|
|
- return i2c_add_driver(&driver);
|
|
|
-}
|
|
|
-
|
|
|
-static void __exit tvp5150_exit(void)
|
|
|
-{
|
|
|
- i2c_del_driver(&driver);
|
|
|
-}
|
|
|
-
|
|
|
-module_init(tvp5150_init);
|
|
|
-module_exit(tvp5150_exit);
|