Merge tag 'for-3.20' of git://git.kernel.org/pub/scm/linux/kernel/git/kishon/linux-phy into usb-testing

Kishon writes:

Adds a new Rockchip PHY driver and contains miscellaneous fixes.

Documentation/devicetree/bindings/phy/phy-miphy28lp.txt

@@ -26,6 +26,7 @@ Required properties (port (child) node):
 		  filled in "reg". It can also contain the offset of the system configuration
 		  registers used as glue-logic to setup the device for SATA/PCIe or USB3
 		  devices.
+- st,syscfg	: Offset of the parent configuration register.
 - resets	: phandle to the parent reset controller.
 - reset-names	: Associated name must be "miphy-sw-rst".
 
@@ -54,18 +55,12 @@ example:
 			phy_port0: port@9b22000 {
 				reg = <0x9b22000 0xff>,
 				      <0x9b09000 0xff>,
-				      <0x9b04000 0xff>,
-				      <0x114 0x4>, /* sysctrl MiPHY cntrl */
-				      <0x818 0x4>, /* sysctrl MiPHY status*/
-				      <0xe0  0x4>, /* sysctrl PCIe */
-				      <0xec  0x4>; /* sysctrl SATA */
+				      <0x9b04000 0xff>;
 				reg-names = "sata-up",
 					    "pcie-up",
-					    "pipew",
-					    "miphy-ctrl-glue",
-					    "miphy-status-glue",
-					    "pcie-glue",
-					    "sata-glue";
+					    "pipew";
+
+				st,syscfg = <0x114 0x818 0xe0 0xec>;
 				#phy-cells = <1>;
 				st,osc-rdy;
 				reset-names = "miphy-sw-rst";
@@ -75,18 +70,13 @@ example:
 			phy_port1: port@9b2a000 {
 				reg = <0x9b2a000 0xff>,
 				      <0x9b19000 0xff>,
-				      <0x9b14000 0xff>,
-				      <0x118 0x4>,
-				      <0x81c 0x4>,
-				      <0xe4  0x4>,
-				      <0xf0  0x4>;
+				      <0x9b14000 0xff>;
 				reg-names = "sata-up",
 					    "pcie-up",
-					    "pipew",
-					    "miphy-ctrl-glue",
-					    "miphy-status-glue",
-					    "pcie-glue",
-					    "sata-glue";
+					    "pipew";
+
+				st,syscfg = <0x118 0x81c 0xe4 0xf0>;
+
 				#phy-cells = <1>;
 				st,osc-force-ext;
 				reset-names = "miphy-sw-rst";
@@ -95,13 +85,12 @@ example:
 
 			phy_port2: port@8f95000 {
 				reg = <0x8f95000 0xff>,
-				      <0x8f90000 0xff>,
-				      <0x11c 0x4>,
-				      <0x820 0x4>;
+				      <0x8f90000 0xff>;
 				reg-names = "pipew",
-				    "usb3-up",
-				    "miphy-ctrl-glue",
-				    "miphy-status-glue";
+					    "usb3-up";
+
+				st,syscfg = <0x11c 0x820>;
+
 				#phy-cells = <1>;
 				reset-names = "miphy-sw-rst";
 				resets = <&softreset STIH407_MIPHY2_SOFTRESET>;
@@ -125,4 +114,4 @@ example:
 
 Macro definitions for the supported miphy configuration can be found in:
 
-include/dt-bindings/phy/phy-miphy28lp.h
+include/dt-bindings/phy/phy.h

Documentation/devicetree/bindings/phy/phy-miphy365x.txt

@@ -6,8 +6,10 @@ for SATA and PCIe.
 
 Required properties (controller (parent) node):
 - compatible    : Should be "st,miphy365x-phy"
-- st,syscfg     : Should be a phandle of the system configuration register group
-		  which contain the SATA, PCIe mode setting bits
+- st,syscfg     : Phandle / integer array property. Phandle of sysconfig group
+		  containing the miphy registers and integer array should contain
+		  an entry for each port sub-node, specifying the control
+		  register offset inside the sysconfig group.
 
 Required nodes	:  A sub-node is required for each channel the controller
 		   provides. Address range information including the usual
@@ -26,7 +28,6 @@ Required properties (port (child) node):
 		  registers filled in "reg":
 			- sata:   For SATA devices
 			- pcie:   For PCIe devices
-			- syscfg: To specify the syscfg based config register
 
 Optional properties (port (child) node):
 - st,sata-gen	     :	Generation of locally attached SATA IP. Expected values
@@ -39,20 +40,20 @@ Example:
 
 	miphy365x_phy: miphy365x@fe382000 {
 		compatible      = "st,miphy365x-phy";
-		st,syscfg  	= <&syscfg_rear>;
+		st,syscfg  	= <&syscfg_rear 0x824 0x828>;
 		#address-cells	= <1>;
 		#size-cells	= <1>;
 		ranges;
 
 		phy_port0: port@fe382000 {
-			reg = <0xfe382000 0x100>, <0xfe394000 0x100>, <0x824 0x4>;
-			reg-names = "sata", "pcie", "syscfg";
+			reg = <0xfe382000 0x100>, <0xfe394000 0x100>;
+			reg-names = "sata", "pcie";
 			#phy-cells = <1>;
 			st,sata-gen = <3>;
 		};
 
 		phy_port1: port@fe38a000 {
-			reg = <0xfe38a000 0x100>, <0xfe804000 0x100>, <0x828 0x4>;;
+			reg = <0xfe38a000 0x100>, <0xfe804000 0x100>;;
 			reg-names = "sata", "pcie", "syscfg";
 			#phy-cells = <1>;
 			st,pcie-tx-pol-inv;

Documentation/devicetree/bindings/phy/phy-stih407-usb.txt

@@ -5,10 +5,7 @@ host controllers (when controlling usb2/1.1 devices) available on STiH407 SoC fa
 
 Required properties:
 - compatible		: should be "st,stih407-usb2-phy"
-- reg			: contain the offset and length of the system configuration registers
-			  used as glue logic to control & parameter phy
-- reg-names		: the names of the system configuration registers in "reg", should be "param" and "reg"
-- st,syscfg		: sysconfig register to manage phy parameter at driver level
+- st,syscfg		: phandle of sysconfig bank plus integer array containing phyparam and phyctrl register offsets
 - resets		: list of phandle and reset specifier pairs. There should be two entries, one
 			  for the whole phy and one for the port
 - reset-names		: list of reset signal names. Should be "global" and "port"
@@ -19,11 +16,8 @@ Example:
 
 usb2_picophy0: usbpicophy@f8 {
 	compatible	= "st,stih407-usb2-phy";
-	reg		= <0xf8 0x04>,	/* syscfg 5062 */
-			  <0xf4 0x04>;	/* syscfg 5061 */
-	reg-names	= "param", "ctrl";
 	#phy-cells	= <0>;
-	st,syscfg	= <&syscfg_core>;
+	st,syscfg	= <&syscfg_core 0x100 0xf4>;
 	resets		= <&softreset STIH407_PICOPHY_SOFTRESET>,
 			  <&picophyreset STIH407_PICOPHY0_RESET>;
 	reset-names	= "global", "port";

Documentation/devicetree/bindings/phy/rockchip-usb-phy.txt

@@ -0,0 +1,37 @@
+ROCKCHIP USB2 PHY
+
+Required properties:
+ - compatible: rockchip,rk3288-usb-phy
+ - rockchip,grf : phandle to the syscon managing the "general
+   register files"
+ - #address-cells: should be 1
+ - #size-cells: should be 0
+
+Sub-nodes:
+Each PHY should be represented as a sub-node.
+
+Sub-nodes
+required properties:
+- #phy-cells: should be 0
+- reg: PHY configure reg address offset in GRF
+		"0x320" - for PHY attach to OTG controller
+		"0x334" - for PHY attach to HOST0 controller
+		"0x348" - for PHY attach to HOST1 controller
+
+Optional Properties:
+- clocks : phandle + clock specifier for the phy clocks
+- clock-names: string, clock name, must be "phyclk"
+
+Example:
+
+usbphy: phy {
+	compatible = "rockchip,rk3288-usb-phy";
+	rockchip,grf = <&grf>;
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	usbphy0: usb-phy0 {
+		#phy-cells = <0>;
+		reg = <0x320>;
+	};
+};

Documentation/devicetree/bindings/phy/samsung-phy.txt

@@ -3,8 +3,8 @@ Samsung S5P/EXYNOS SoC series MIPI CSIS/DSIM DPHY
 
 Required properties:
 - compatible : should be "samsung,s5pv210-mipi-video-phy";
-- reg : offset and length of the MIPI DPHY register set;
 - #phy-cells : from the generic phy bindings, must be 1;
+- syscon - phandle to the PMU system controller;
 
 For "samsung,s5pv210-mipi-video-phy" compatible PHYs the second cell in
 the PHY specifier identifies the PHY and its meaning is as follows:

arch/arm/boot/dts/stih416.dtsi

@@ -283,21 +283,21 @@
 
 		miphy365x_phy: phy@fe382000 {
 			compatible      = "st,miphy365x-phy";
-			st,syscfg  	= <&syscfg_rear>;
+			st,syscfg	= <&syscfg_rear 0x824 0x828>;
 			#address-cells	= <1>;
 			#size-cells	= <1>;
 			ranges;
 
 			phy_port0: port@fe382000 {
 				#phy-cells = <1>;
-				reg = <0xfe382000 0x100>, <0xfe394000 0x100>, <0x824 0x4>;
-				reg-names = "sata", "pcie", "syscfg";
+				reg = <0xfe382000 0x100>, <0xfe394000 0x100>;
+				reg-names = "sata", "pcie";
 			};
 
 			phy_port1: port@fe38a000 {
 				#phy-cells = <1>;
-				reg = <0xfe38a000 0x100>, <0xfe804000 0x100>, <0x828 0x4>;
-				reg-names = "sata", "pcie", "syscfg";
+				reg = <0xfe38a000 0x100>, <0xfe804000 0x100>;
+				reg-names = "sata", "pcie";
 			};
 		};
 

drivers/phy/Kconfig

@@ -239,6 +239,13 @@ config PHY_QCOM_IPQ806X_SATA
 	depends on OF
 	select GENERIC_PHY
 
+config PHY_ROCKCHIP_USB
+	tristate "Rockchip USB2 PHY Driver"
+	depends on ARCH_ROCKCHIP && OF
+	select GENERIC_PHY
+	help
+	  Enable this to support the Rockchip USB 2.0 PHY.
+
 config PHY_ST_SPEAR1310_MIPHY
 	tristate "ST SPEAR1310-MIPHY driver"
 	select GENERIC_PHY

drivers/phy/Makefile

@@ -28,6 +28,7 @@ phy-exynos-usb2-$(CONFIG_PHY_EXYNOS5250_USB2)	+= phy-exynos5250-usb2.o
 phy-exynos-usb2-$(CONFIG_PHY_S5PV210_USB2)	+= phy-s5pv210-usb2.o
 obj-$(CONFIG_PHY_EXYNOS5_USBDRD)	+= phy-exynos5-usbdrd.o
 obj-$(CONFIG_PHY_QCOM_APQ8064_SATA)	+= phy-qcom-apq8064-sata.o
+obj-$(CONFIG_PHY_ROCKCHIP_USB) += phy-rockchip-usb.o
 obj-$(CONFIG_PHY_QCOM_IPQ806X_SATA)	+= phy-qcom-ipq806x-sata.o
 obj-$(CONFIG_PHY_ST_SPEAR1310_MIPHY)	+= phy-spear1310-miphy.o
 obj-$(CONFIG_PHY_ST_SPEAR1340_MIPHY)	+= phy-spear1340-miphy.o

drivers/phy/phy-armada375-usb2.c

@@ -118,8 +118,8 @@ static int armada375_usb_phy_probe(struct platform_device *pdev)
 
 	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
 	usb_cluster_base = devm_ioremap_resource(&pdev->dev, res);
-	if (!usb_cluster_base)
-		return -ENOMEM;
+	if (IS_ERR(usb_cluster_base))
+		return PTR_ERR(usb_cluster_base);
 
 	phy = devm_phy_create(dev, NULL, &armada375_usb_phy_ops);
 	if (IS_ERR(phy)) {

drivers/phy/phy-exynos-mipi-video.c

@@ -12,19 +12,18 @@
 #include <linux/err.h>
 #include <linux/io.h>
 #include <linux/kernel.h>
+#include <linux/mfd/syscon/exynos4-pmu.h>
 #include <linux/module.h>
 #include <linux/of.h>
 #include <linux/of_address.h>
 #include <linux/phy/phy.h>
 #include <linux/platform_device.h>
+#include <linux/regmap.h>
 #include <linux/spinlock.h>
+#include <linux/mfd/syscon.h>
 
-/* MIPI_PHYn_CONTROL register offset: n = 0..1 */
+/* MIPI_PHYn_CONTROL reg. offset (for base address from ioremap): n = 0..1 */
 #define EXYNOS_MIPI_PHY_CONTROL(n)	((n) * 4)
-#define EXYNOS_MIPI_PHY_ENABLE		(1 << 0)
-#define EXYNOS_MIPI_PHY_SRESETN		(1 << 1)
-#define EXYNOS_MIPI_PHY_MRESETN		(1 << 2)
-#define EXYNOS_MIPI_PHY_RESET_MASK	(3 << 1)
 
 enum exynos_mipi_phy_id {
 	EXYNOS_MIPI_PHY_ID_CSIS0,
@@ -38,43 +37,62 @@ enum exynos_mipi_phy_id {
 	((id) == EXYNOS_MIPI_PHY_ID_DSIM0 || (id) == EXYNOS_MIPI_PHY_ID_DSIM1)
 
 struct exynos_mipi_video_phy {
-	spinlock_t slock;
 	struct video_phy_desc {
 		struct phy *phy;
 		unsigned int index;
 	} phys[EXYNOS_MIPI_PHYS_NUM];
+	spinlock_t slock;
 	void __iomem *regs;
+	struct mutex mutex;
+	struct regmap *regmap;
 };
 
 static int __set_phy_state(struct exynos_mipi_video_phy *state,
 			enum exynos_mipi_phy_id id, unsigned int on)
 {
+	const unsigned int offset = EXYNOS4_MIPI_PHY_CONTROL(id / 2);
 	void __iomem *addr;
-	u32 reg, reset;
-
-	addr = state->regs + EXYNOS_MIPI_PHY_CONTROL(id / 2);
+	u32 val, reset;
 
 	if (is_mipi_dsim_phy_id(id))
-		reset = EXYNOS_MIPI_PHY_MRESETN;
-	else
-		reset = EXYNOS_MIPI_PHY_SRESETN;
-
-	spin_lock(&state->slock);
-	reg = readl(addr);
-	if (on)
-		reg |= reset;
+		reset = EXYNOS4_MIPI_PHY_MRESETN;
 	else
-		reg &= ~reset;
-	writel(reg, addr);
-
-	/* Clear ENABLE bit only if MRESETN, SRESETN bits are not set. */
-	if (on)
-		reg |= EXYNOS_MIPI_PHY_ENABLE;
-	else if (!(reg & EXYNOS_MIPI_PHY_RESET_MASK))
-		reg &= ~EXYNOS_MIPI_PHY_ENABLE;
+		reset = EXYNOS4_MIPI_PHY_SRESETN;
+
+	if (state->regmap) {
+		mutex_lock(&state->mutex);
+		regmap_read(state->regmap, offset, &val);
+		if (on)
+			val |= reset;
+		else
+			val &= ~reset;
+		regmap_write(state->regmap, offset, val);
+		if (on)
+			val |= EXYNOS4_MIPI_PHY_ENABLE;
+		else if (!(val & EXYNOS4_MIPI_PHY_RESET_MASK))
+			val &= ~EXYNOS4_MIPI_PHY_ENABLE;
+		regmap_write(state->regmap, offset, val);
+		mutex_unlock(&state->mutex);
+	} else {
+		addr = state->regs + EXYNOS_MIPI_PHY_CONTROL(id / 2);
+
+		spin_lock(&state->slock);
+		val = readl(addr);
+		if (on)
+			val |= reset;
+		else
+			val &= ~reset;
+		writel(val, addr);
+		/* Clear ENABLE bit only if MRESETN, SRESETN bits are not set */
+		if (on)
+			val |= EXYNOS4_MIPI_PHY_ENABLE;
+		else if (!(val & EXYNOS4_MIPI_PHY_RESET_MASK))
+			val &= ~EXYNOS4_MIPI_PHY_ENABLE;
+
+		writel(val, addr);
+		spin_unlock(&state->slock);
+	}
 
-	writel(reg, addr);
-	spin_unlock(&state->slock);
 	return 0;
 }
 
@@ -118,7 +136,6 @@ static int exynos_mipi_video_phy_probe(struct platform_device *pdev)
 {
 	struct exynos_mipi_video_phy *state;
 	struct device *dev = &pdev->dev;
-	struct resource *res;
 	struct phy_provider *phy_provider;
 	unsigned int i;
 
@@ -126,14 +143,22 @@ static int exynos_mipi_video_phy_probe(struct platform_device *pdev)
 	if (!state)
 		return -ENOMEM;
 
-	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	state->regmap = syscon_regmap_lookup_by_phandle(dev->of_node, "syscon");
+	if (IS_ERR(state->regmap)) {
+		struct resource *res;
 
-	state->regs = devm_ioremap_resource(dev, res);
-	if (IS_ERR(state->regs))
-		return PTR_ERR(state->regs);
+		dev_info(dev, "regmap lookup failed: %ld\n",
+			 PTR_ERR(state->regmap));
+
+		res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+		state->regs = devm_ioremap_resource(dev, res);
+		if (IS_ERR(state->regs))
+			return PTR_ERR(state->regs);
+	}
 
 	dev_set_drvdata(dev, state);
 	spin_lock_init(&state->slock);
+	mutex_init(&state->mutex);
 
 	for (i = 0; i < EXYNOS_MIPI_PHYS_NUM; i++) {
 		struct phy *phy = devm_phy_create(dev, NULL,

drivers/phy/phy-miphy28lp.c

@@ -194,6 +194,14 @@
 #define MIPHY_SATA_BANK_NB	3
 #define MIPHY_PCIE_BANK_NB	2
 
+enum {
+	SYSCFG_CTRL,
+	SYSCFG_STATUS,
+	SYSCFG_PCI,
+	SYSCFG_SATA,
+	SYSCFG_REG_MAX,
+};
+
 struct miphy28lp_phy {
 	struct phy *phy;
 	struct miphy28lp_dev *phydev;
@@ -211,10 +219,7 @@ struct miphy28lp_phy {
 	u32 sata_gen;
 
 	/* Sysconfig registers offsets needed to configure the device */
-	u32 syscfg_miphy_ctrl;
-	u32 syscfg_miphy_status;
-	u32 syscfg_pci;
-	u32 syscfg_sata;
+	u32 syscfg_reg[SYSCFG_REG_MAX];
 	u8 type;
 };
 
@@ -834,12 +839,12 @@ static int miphy_osc_is_ready(struct miphy28lp_phy *miphy_phy)
 	if (!miphy_phy->osc_rdy)
 		return 0;
 
-	if (!miphy_phy->syscfg_miphy_status)
+	if (!miphy_phy->syscfg_reg[SYSCFG_STATUS])
 		return -EINVAL;
 
 	do {
-		regmap_read(miphy_dev->regmap, miphy_phy->syscfg_miphy_status,
-			    &val);
+		regmap_read(miphy_dev->regmap,
+				miphy_phy->syscfg_reg[SYSCFG_STATUS], &val);
 
 		if ((val & MIPHY_OSC_RDY) != MIPHY_OSC_RDY)
 			cpu_relax();
@@ -888,7 +893,7 @@ static int miphy28lp_setup(struct miphy28lp_phy *miphy_phy, u32 miphy_val)
 	int err;
 	struct miphy28lp_dev *miphy_dev = miphy_phy->phydev;
 
-	if (!miphy_phy->syscfg_miphy_ctrl)
+	if (!miphy_phy->syscfg_reg[SYSCFG_CTRL])
 		return -EINVAL;
 
 	err = reset_control_assert(miphy_phy->miphy_rst);
@@ -900,7 +905,8 @@ static int miphy28lp_setup(struct miphy28lp_phy *miphy_phy, u32 miphy_val)
 	if (miphy_phy->osc_force_ext)
 		miphy_val |= MIPHY_OSC_FORCE_EXT;
 
-	regmap_update_bits(miphy_dev->regmap, miphy_phy->syscfg_miphy_ctrl,
+	regmap_update_bits(miphy_dev->regmap,
+			   miphy_phy->syscfg_reg[SYSCFG_CTRL],
 			   MIPHY_CTRL_MASK, miphy_val);
 
 	err = reset_control_deassert(miphy_phy->miphy_rst);
@@ -917,8 +923,9 @@ static int miphy28lp_init_sata(struct miphy28lp_phy *miphy_phy)
 	struct miphy28lp_dev *miphy_dev = miphy_phy->phydev;
 	int err, sata_conf = SATA_CTRL_SELECT_SATA;
 
-	if ((!miphy_phy->syscfg_sata) || (!miphy_phy->syscfg_pci)
-		|| (!miphy_phy->base))
+	if ((!miphy_phy->syscfg_reg[SYSCFG_SATA]) ||
+			(!miphy_phy->syscfg_reg[SYSCFG_PCI]) ||
+			(!miphy_phy->base))
 		return -EINVAL;
 
 	dev_info(miphy_dev->dev, "sata-up mode, addr 0x%p\n", miphy_phy->base);
@@ -926,10 +933,11 @@ static int miphy28lp_init_sata(struct miphy28lp_phy *miphy_phy)
 	/* Configure the glue-logic */
 	sata_conf |= ((miphy_phy->sata_gen - SATA_GEN1) << SATA_SPDMODE);
 
-	regmap_update_bits(miphy_dev->regmap, miphy_phy->syscfg_sata,
+	regmap_update_bits(miphy_dev->regmap,
+			   miphy_phy->syscfg_reg[SYSCFG_SATA],
 			   SATA_CTRL_MASK, sata_conf);
 
-	regmap_update_bits(miphy_dev->regmap, miphy_phy->syscfg_pci,
+	regmap_update_bits(miphy_dev->regmap, miphy_phy->syscfg_reg[SYSCFG_PCI],
 			   PCIE_CTRL_MASK, SATA_CTRL_SELECT_PCIE);
 
 	/* MiPHY path and clocking init */
@@ -951,17 +959,19 @@ static int miphy28lp_init_pcie(struct miphy28lp_phy *miphy_phy)
 	struct miphy28lp_dev *miphy_dev = miphy_phy->phydev;
 	int err;
 
-	if ((!miphy_phy->syscfg_sata) || (!miphy_phy->syscfg_pci)
+	if ((!miphy_phy->syscfg_reg[SYSCFG_SATA]) ||
+			(!miphy_phy->syscfg_reg[SYSCFG_PCI])
 		|| (!miphy_phy->base) || (!miphy_phy->pipebase))
 		return -EINVAL;
 
 	dev_info(miphy_dev->dev, "pcie-up mode, addr 0x%p\n", miphy_phy->base);
 
 	/* Configure the glue-logic */
-	regmap_update_bits(miphy_dev->regmap, miphy_phy->syscfg_sata,
+	regmap_update_bits(miphy_dev->regmap,
+			   miphy_phy->syscfg_reg[SYSCFG_SATA],
 			   SATA_CTRL_MASK, SATA_CTRL_SELECT_PCIE);
 
-	regmap_update_bits(miphy_dev->regmap, miphy_phy->syscfg_pci,
+	regmap_update_bits(miphy_dev->regmap, miphy_phy->syscfg_reg[SYSCFG_PCI],
 			   PCIE_CTRL_MASK, SYSCFG_PCIE_PCIE_VAL);
 
 	/* MiPHY path and clocking init */
@@ -1156,7 +1166,8 @@ static int miphy28lp_probe_resets(struct device_node *node,
 static int miphy28lp_of_probe(struct device_node *np,
 			      struct miphy28lp_phy *miphy_phy)
 {
-	struct resource res;
+	int i;
+	u32 ctrlreg;
 
 	miphy_phy->osc_force_ext =
 		of_property_read_bool(np, "st,osc-force-ext");
@@ -1175,18 +1186,10 @@ static int miphy28lp_of_probe(struct device_node *np,
 	if (!miphy_phy->sata_gen)
 		miphy_phy->sata_gen = SATA_GEN1;
 
-	if (!miphy28lp_get_resource_byname(np, "miphy-ctrl-glue", &res))
-		miphy_phy->syscfg_miphy_ctrl = res.start;
-
-	if (!miphy28lp_get_resource_byname(np, "miphy-status-glue", &res))
-		miphy_phy->syscfg_miphy_status = res.start;
-
-	if (!miphy28lp_get_resource_byname(np, "pcie-glue", &res))
-		miphy_phy->syscfg_pci = res.start;
-
-	if (!miphy28lp_get_resource_byname(np, "sata-glue", &res))
-		miphy_phy->syscfg_sata = res.start;
-
+	for (i = 0; i < SYSCFG_REG_MAX; i++) {
+		if (!of_property_read_u32_index(np, "st,syscfg", i, &ctrlreg))
+			miphy_phy->syscfg_reg[i] = ctrlreg;
+	}
 
 	return 0;
 }

drivers/phy/phy-miphy365x.c

@@ -141,7 +141,7 @@ struct miphy365x_phy {
 	bool pcie_tx_pol_inv;
 	bool sata_tx_pol_inv;
 	u32 sata_gen;
-	u64 ctrlreg;
+	u32 ctrlreg;
 	u8 type;
 };
 
@@ -179,7 +179,7 @@ static int miphy365x_set_path(struct miphy365x_phy *miphy_phy,
 	bool sata = (miphy_phy->type == MIPHY_TYPE_SATA);
 
 	return regmap_update_bits(miphy_dev->regmap,
-				  (unsigned int)miphy_phy->ctrlreg,
+				  miphy_phy->ctrlreg,
 				  SYSCFG_SELECT_SATA_MASK,
 				  sata << SYSCFG_SELECT_SATA_POS);
 }
@@ -445,7 +445,6 @@ int miphy365x_get_addr(struct device *dev, struct miphy365x_phy *miphy_phy,
 {
 	struct device_node *phynode = miphy_phy->phy->dev.of_node;
 	const char *name;
-	const __be32 *taddr;
 	int type = miphy_phy->type;
 	int ret;
 
@@ -455,22 +454,6 @@ int miphy365x_get_addr(struct device *dev, struct miphy365x_phy *miphy_phy,
 		return ret;
 	}
 
-	if (!strncmp(name, "syscfg", 6)) {
-		taddr = of_get_address(phynode, index, NULL, NULL);
-		if (!taddr) {
-			dev_err(dev, "failed to fetch syscfg address\n");
-			return -EINVAL;
-		}
-
-		miphy_phy->ctrlreg = of_translate_address(phynode, taddr);
-		if (miphy_phy->ctrlreg == OF_BAD_ADDR) {
-			dev_err(dev, "failed to translate syscfg address\n");
-			return -EINVAL;
-		}
-
-		return 0;
-	}
-
 	if (!((!strncmp(name, "sata", 4) && type == MIPHY_TYPE_SATA) ||
 	      (!strncmp(name, "pcie", 4) && type == MIPHY_TYPE_PCIE)))
 		return 0;
@@ -606,7 +589,15 @@ static int miphy365x_probe(struct platform_device *pdev)
 			return ret;
 
 		phy_set_drvdata(phy, miphy_dev->phys[port]);
+
 		port++;
+		/* sysconfig offsets are indexed from 1 */
+		ret = of_property_read_u32_index(np, "st,syscfg", port,
+					&miphy_phy->ctrlreg);
+		if (ret) {
+			dev_err(&pdev->dev, "No sysconfig offset found\n");
+			return ret;
+		}
 	}
 
 	provider = devm_of_phy_provider_register(&pdev->dev, miphy365x_xlate);

drivers/phy/phy-rockchip-usb.c

@@ -0,0 +1,158 @@
+/*
+ * Rockchip usb PHY driver
+ *
+ * Copyright (C) 2014 Yunzhi Li <lyz@rock-chips.com>
+ * Copyright (C) 2014 ROCKCHIP, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/clk.h>
+#include <linux/io.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/mutex.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/phy/phy.h>
+#include <linux/platform_device.h>
+#include <linux/regulator/consumer.h>
+#include <linux/reset.h>
+#include <linux/regmap.h>
+#include <linux/mfd/syscon.h>
+
+/*
+ * The higher 16-bit of this register is used for write protection
+ * only if BIT(13 + 16) set to 1 the BIT(13) can be written.
+ */
+#define SIDDQ_WRITE_ENA	BIT(29)
+#define SIDDQ_ON		BIT(13)
+#define SIDDQ_OFF		(0 << 13)
+
+struct rockchip_usb_phy {
+	unsigned int	reg_offset;
+	struct regmap	*reg_base;
+	struct clk	*clk;
+	struct phy	*phy;
+};
+
+static int rockchip_usb_phy_power(struct rockchip_usb_phy *phy,
+					   bool siddq)
+{
+	return regmap_write(phy->reg_base, phy->reg_offset,
+			    SIDDQ_WRITE_ENA | (siddq ? SIDDQ_ON : SIDDQ_OFF));
+}
+
+static int rockchip_usb_phy_power_off(struct phy *_phy)
+{
+	struct rockchip_usb_phy *phy = phy_get_drvdata(_phy);
+	int ret = 0;
+
+	/* Power down usb phy analog blocks by set siddq 1 */
+	ret = rockchip_usb_phy_power(phy, 1);
+	if (ret)
+		return ret;
+
+	clk_disable_unprepare(phy->clk);
+	if (ret)
+		return ret;
+
+	return 0;
+}
+
+static int rockchip_usb_phy_power_on(struct phy *_phy)
+{
+	struct rockchip_usb_phy *phy = phy_get_drvdata(_phy);
+	int ret = 0;
+
+	ret = clk_prepare_enable(phy->clk);
+	if (ret)
+		return ret;
+
+	/* Power up usb phy analog blocks by set siddq 0 */
+	ret = rockchip_usb_phy_power(phy, 0);
+	if (ret)
+		return ret;
+
+	return 0;
+}
+
+static struct phy_ops ops = {
+	.power_on	= rockchip_usb_phy_power_on,
+	.power_off	= rockchip_usb_phy_power_off,
+	.owner		= THIS_MODULE,
+};
+
+static int rockchip_usb_phy_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct rockchip_usb_phy *rk_phy;
+	struct phy_provider *phy_provider;
+	struct device_node *child;
+	struct regmap *grf;
+	unsigned int reg_offset;
+
+	grf = syscon_regmap_lookup_by_phandle(dev->of_node, "rockchip,grf");
+	if (IS_ERR(grf)) {
+		dev_err(&pdev->dev, "Missing rockchip,grf property\n");
+		return PTR_ERR(grf);
+	}
+
+	for_each_available_child_of_node(dev->of_node, child) {
+		rk_phy = devm_kzalloc(dev, sizeof(*rk_phy), GFP_KERNEL);
+		if (!rk_phy)
+			return -ENOMEM;
+
+		if (of_property_read_u32(child, "reg", &reg_offset)) {
+			dev_err(dev, "missing reg property in node %s\n",
+				child->name);
+			return -EINVAL;
+		}
+
+		rk_phy->reg_offset = reg_offset;
+		rk_phy->reg_base = grf;
+
+		rk_phy->clk = of_clk_get_by_name(child, "phyclk");
+		if (IS_ERR(rk_phy->clk))
+			rk_phy->clk = NULL;
+
+		rk_phy->phy = devm_phy_create(dev, child, &ops);
+		if (IS_ERR(rk_phy->phy)) {
+			dev_err(dev, "failed to create PHY\n");
+			return PTR_ERR(rk_phy->phy);
+		}
+		phy_set_drvdata(rk_phy->phy, rk_phy);
+	}
+
+	phy_provider = devm_of_phy_provider_register(dev, of_phy_simple_xlate);
+	return PTR_ERR_OR_ZERO(phy_provider);
+}
+
+static const struct of_device_id rockchip_usb_phy_dt_ids[] = {
+	{ .compatible = "rockchip,rk3288-usb-phy" },
+	{}
+};
+
+MODULE_DEVICE_TABLE(of, rockchip_usb_phy_dt_ids);
+
+static struct platform_driver rockchip_usb_driver = {
+	.probe		= rockchip_usb_phy_probe,
+	.driver		= {
+		.name	= "rockchip-usb-phy",
+		.owner	= THIS_MODULE,
+		.of_match_table = rockchip_usb_phy_dt_ids,
+	},
+};
+
+module_platform_driver(rockchip_usb_driver);
+
+MODULE_AUTHOR("Yunzhi Li <lyz@rock-chips.com>");
+MODULE_DESCRIPTION("Rockchip USB 2.0 PHY driver");
+MODULE_LICENSE("GPL v2");

drivers/phy/phy-stih407-usb.c

@@ -22,6 +22,9 @@
 #include <linux/mfd/syscon.h>
 #include <linux/phy/phy.h>
 
+#define PHYPARAM_REG	1
+#define PHYCTRL_REG	2
+
 /* Default PHY_SEL and REFCLKSEL configuration */
 #define STIH407_USB_PICOPHY_CTRL_PORT_CONF	0x6
 #define STIH407_USB_PICOPHY_CTRL_PORT_MASK	0x1f
@@ -93,7 +96,7 @@ static int stih407_usb2_picophy_probe(struct platform_device *pdev)
 	struct device_node *np = dev->of_node;
 	struct phy_provider *phy_provider;
 	struct phy *phy;
-	struct resource *res;
+	int ret;
 
 	phy_dev = devm_kzalloc(dev, sizeof(*phy_dev), GFP_KERNEL);
 	if (!phy_dev)
@@ -123,19 +126,19 @@ static int stih407_usb2_picophy_probe(struct platform_device *pdev)
 		return PTR_ERR(phy_dev->regmap);
 	}
 
-	res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "ctrl");
-	if (!res) {
-		dev_err(dev, "No ctrl reg found\n");
-		return -ENXIO;
+	ret = of_property_read_u32_index(np, "st,syscfg", PHYPARAM_REG,
+					&phy_dev->param);
+	if (ret) {
+		dev_err(dev, "can't get phyparam offset (%d)\n", ret);
+		return ret;
 	}
-	phy_dev->ctrl = res->start;
 
-	res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "param");
-	if (!res) {
-		dev_err(dev, "No param reg found\n");
-		return -ENXIO;
+	ret = of_property_read_u32_index(np, "st,syscfg", PHYCTRL_REG,
+					&phy_dev->ctrl);
+	if (ret) {
+		dev_err(dev, "can't get phyctrl offset (%d)\n", ret);
+		return ret;
 	}
-	phy_dev->param = res->start;
 
 	phy = devm_phy_create(dev, NULL, &stih407_usb2_picophy_data);
 	if (IS_ERR(phy)) {

drivers/phy/phy-ti-pipe3.c

@@ -28,6 +28,7 @@
 #include <linux/delay.h>
 #include <linux/phy/omap_control_phy.h>
 #include <linux/of_platform.h>
+#include <linux/spinlock.h>
 
 #define	PLL_STATUS		0x00000004
 #define	PLL_GO			0x00000008
@@ -82,6 +83,10 @@ struct ti_pipe3 {
 	struct clk		*refclk;
 	struct clk		*div_clk;
 	struct pipe3_dpll_map	*dpll_map;
+	bool			enabled;
+	spinlock_t		lock;	/* serialize clock enable/disable */
+	/* the below flag is needed specifically for SATA */
+	bool			refclk_enabled;
 };
 
 static struct pipe3_dpll_map dpll_map_usb[] = {
@@ -307,6 +312,7 @@ static int ti_pipe3_probe(struct platform_device *pdev)
 		return -ENOMEM;
 
 	phy->dev		= &pdev->dev;
+	spin_lock_init(&phy->lock);
 
 	if (!of_device_is_compatible(node, "ti,phy-pipe3-pcie")) {
 		match = of_match_device(of_match_ptr(ti_pipe3_id_table),
@@ -333,21 +339,24 @@ static int ti_pipe3_probe(struct platform_device *pdev)
 		}
 	}
 
+	phy->refclk = devm_clk_get(phy->dev, "refclk");
+	if (IS_ERR(phy->refclk)) {
+		dev_err(&pdev->dev, "unable to get refclk\n");
+		/* older DTBs have missing refclk in SATA PHY
+		 * so don't bail out in case of SATA PHY.
+		 */
+		if (!of_device_is_compatible(node, "ti,phy-pipe3-sata"))
+			return PTR_ERR(phy->refclk);
+	}
+
 	if (!of_device_is_compatible(node, "ti,phy-pipe3-sata")) {
 		phy->wkupclk = devm_clk_get(phy->dev, "wkupclk");
 		if (IS_ERR(phy->wkupclk)) {
 			dev_err(&pdev->dev, "unable to get wkupclk\n");
 			return PTR_ERR(phy->wkupclk);
 		}
-
-		phy->refclk = devm_clk_get(phy->dev, "refclk");
-		if (IS_ERR(phy->refclk)) {
-			dev_err(&pdev->dev, "unable to get refclk\n");
-			return PTR_ERR(phy->refclk);
-		}
 	} else {
 		phy->wkupclk = ERR_PTR(-ENODEV);
-		phy->refclk = ERR_PTR(-ENODEV);
 	}
 
 	if (of_device_is_compatible(node, "ti,phy-pipe3-pcie")) {
@@ -426,33 +435,42 @@ static int ti_pipe3_remove(struct platform_device *pdev)
 }
 
 #ifdef CONFIG_PM
-
-static int ti_pipe3_runtime_suspend(struct device *dev)
+static int ti_pipe3_enable_refclk(struct ti_pipe3 *phy)
 {
-	struct ti_pipe3	*phy = dev_get_drvdata(dev);
+	if (!IS_ERR(phy->refclk) && !phy->refclk_enabled) {
+		int ret;
 
-	if (!IS_ERR(phy->wkupclk))
-		clk_disable_unprepare(phy->wkupclk);
+		ret = clk_prepare_enable(phy->refclk);
+		if (ret) {
+			dev_err(phy->dev, "Failed to enable refclk %d\n", ret);
+			return ret;
+		}
+		phy->refclk_enabled = true;
+	}
+
+	return 0;
+}
+
+static void ti_pipe3_disable_refclk(struct ti_pipe3 *phy)
+{
 	if (!IS_ERR(phy->refclk))
 		clk_disable_unprepare(phy->refclk);
-	if (!IS_ERR(phy->div_clk))
-		clk_disable_unprepare(phy->div_clk);
 
-	return 0;
+	phy->refclk_enabled = false;
 }
 
-static int ti_pipe3_runtime_resume(struct device *dev)
+static int ti_pipe3_enable_clocks(struct ti_pipe3 *phy)
 {
-	u32 ret = 0;
-	struct ti_pipe3	*phy = dev_get_drvdata(dev);
+	int ret = 0;
+	unsigned long flags;
 
-	if (!IS_ERR(phy->refclk)) {
-		ret = clk_prepare_enable(phy->refclk);
-		if (ret) {
-			dev_err(phy->dev, "Failed to enable refclk %d\n", ret);
-			goto err1;
-		}
-	}
+	spin_lock_irqsave(&phy->lock, flags);
+	if (phy->enabled)
+		goto err1;
+
+	ret = ti_pipe3_enable_refclk(phy);
+	if (ret)
+		goto err1;
 
 	if (!IS_ERR(phy->wkupclk)) {
 		ret = clk_prepare_enable(phy->wkupclk);
@@ -469,6 +487,9 @@ static int ti_pipe3_runtime_resume(struct device *dev)
 			goto err3;
 		}
 	}
+
+	phy->enabled = true;
+	spin_unlock_irqrestore(&phy->lock, flags);
 	return 0;
 
 err3:
@@ -479,20 +500,80 @@ err2:
 	if (!IS_ERR(phy->refclk))
 		clk_disable_unprepare(phy->refclk);
 
+	ti_pipe3_disable_refclk(phy);
 err1:
+	spin_unlock_irqrestore(&phy->lock, flags);
 	return ret;
 }
 
+static void ti_pipe3_disable_clocks(struct ti_pipe3 *phy)
+{
+	unsigned long flags;
+
+	spin_lock_irqsave(&phy->lock, flags);
+	if (!phy->enabled) {
+		spin_unlock_irqrestore(&phy->lock, flags);
+		return;
+	}
+
+	if (!IS_ERR(phy->wkupclk))
+		clk_disable_unprepare(phy->wkupclk);
+	/* Don't disable refclk for SATA PHY due to Errata i783 */
+	if (!of_device_is_compatible(phy->dev->of_node, "ti,phy-pipe3-sata"))
+		ti_pipe3_disable_refclk(phy);
+	if (!IS_ERR(phy->div_clk))
+		clk_disable_unprepare(phy->div_clk);
+	phy->enabled = false;
+	spin_unlock_irqrestore(&phy->lock, flags);
+}
+
+static int ti_pipe3_runtime_suspend(struct device *dev)
+{
+	struct ti_pipe3	*phy = dev_get_drvdata(dev);
+
+	ti_pipe3_disable_clocks(phy);
+	return 0;
+}
+
+static int ti_pipe3_runtime_resume(struct device *dev)
+{
+	struct ti_pipe3	*phy = dev_get_drvdata(dev);
+	int ret = 0;
+
+	ret = ti_pipe3_enable_clocks(phy);
+	return ret;
+}
+
+static int ti_pipe3_suspend(struct device *dev)
+{
+	struct ti_pipe3	*phy = dev_get_drvdata(dev);
+
+	ti_pipe3_disable_clocks(phy);
+	return 0;
+}
+
+static int ti_pipe3_resume(struct device *dev)
+{
+	struct ti_pipe3	*phy = dev_get_drvdata(dev);
+	int ret;
+
+	ret = ti_pipe3_enable_clocks(phy);
+	if (ret)
+		return ret;
+
+	pm_runtime_disable(dev);
+	pm_runtime_set_active(dev);
+	pm_runtime_enable(dev);
+	return 0;
+}
+#endif
+
 static const struct dev_pm_ops ti_pipe3_pm_ops = {
 	SET_RUNTIME_PM_OPS(ti_pipe3_runtime_suspend,
 			   ti_pipe3_runtime_resume, NULL)
+	SET_SYSTEM_SLEEP_PM_OPS(ti_pipe3_suspend, ti_pipe3_resume)
 };
 
-#define DEV_PM_OPS     (&ti_pipe3_pm_ops)
-#else
-#define DEV_PM_OPS     NULL
-#endif
-
 #ifdef CONFIG_OF
 static const struct of_device_id ti_pipe3_id_table[] = {
 	{
@@ -520,7 +601,7 @@ static struct platform_driver ti_pipe3_driver = {
 	.remove		= ti_pipe3_remove,
 	.driver		= {
 		.name	= "ti-pipe3",
-		.pm	= DEV_PM_OPS,
+		.pm	= &ti_pipe3_pm_ops,
 		.of_match_table = of_match_ptr(ti_pipe3_id_table),
 	},
 };

include/linux/mfd/syscon/exynos4-pmu.h

@@ -0,0 +1,21 @@
+/*
+ * Copyright (C) 2015 Samsung Electronics Co., Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef _LINUX_MFD_SYSCON_PMU_EXYNOS4_H_
+#define _LINUX_MFD_SYSCON_PMU_EXYNOS4_H_
+
+/* Exynos4 PMU register definitions */
+
+/* MIPI_PHYn_CONTROL register offset: n = 0..1 */
+#define EXYNOS4_MIPI_PHY_CONTROL(n)	(0x710 + (n) * 4)
+#define EXYNOS4_MIPI_PHY_ENABLE		(1 << 0)
+#define EXYNOS4_MIPI_PHY_SRESETN	(1 << 1)
+#define EXYNOS4_MIPI_PHY_MRESETN	(1 << 2)
+#define EXYNOS4_MIPI_PHY_RESET_MASK	(3 << 1)
+
+#endif /* _LINUX_MFD_SYSCON_PMU_EXYNOS4_H_ */