be2net: log digital signature errors while flashing FW image

(based on a jumper setting on the adapter.) In this mode, the FW image when
flashed is authenticated with a digital signature. This patch logs
appropriate error messages and return a status to ethtool when errors
relating to FW image authentication occur.

Signed-off-by: Suresh Reddy <suresh.reddy@avagotech.com>
Signed-off-by: Sathya Perla <sathya.perla@avagotech.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

drivers/net/ethernet/emulex/benet/be_cmds.c

@@ -2959,7 +2959,19 @@ flash:
 		} else if (status) {
 			dev_err(dev, "Flashing section type 0x%x failed\n",
 				img_type);
-			return -EFAULT;
+
+			switch (addl_status(status)) {
+			case MCC_ADDL_STATUS_MISSING_SIGNATURE:
+				dev_err(dev,
+					"Digital signature missing in FW\n");
+				return -EINVAL;
+			case MCC_ADDL_STATUS_INVALID_SIGNATURE:
+				dev_err(dev,
+					"Invalid digital signature in FW\n");
+				return -EINVAL;
+			default:
+				return -EFAULT;
+			}
 		}
 	}
 	return 0;

drivers/net/ethernet/emulex/benet/be_cmds.h

@@ -66,7 +66,9 @@ enum mcc_addl_status {
 	MCC_ADDL_STATUS_INSUFFICIENT_RESOURCES = 0x16,
 	MCC_ADDL_STATUS_FLASH_IMAGE_CRC_MISMATCH = 0x4d,
 	MCC_ADDL_STATUS_TOO_MANY_INTERFACES = 0x4a,
-	MCC_ADDL_STATUS_INSUFFICIENT_VLANS = 0xab
+	MCC_ADDL_STATUS_INSUFFICIENT_VLANS = 0xab,
+	MCC_ADDL_STATUS_INVALID_SIGNATURE = 0x56,
+	MCC_ADDL_STATUS_MISSING_SIGNATURE = 0x57
 };
 
 #define CQE_BASE_STATUS_MASK		0xFFFF