Merge tag 'armsoc-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM SoC platform updates from Arnd Bergmann:
 "In the SoC branch we normally collect classic arch/arm/mach-*
  contents, i.e. C code changes for SoC platforms. This release cycle
  the diffstat is quite nice, in that we're removing 3x the amount of
  code that's being added.

  The main reason for this is that there's a removal of camera drivers
  for Freescale i.MX chips (driver was removed so the device
  registration isn't needed any more). There's also removal of display
  initialization code for OMAP that is no longer needed.

  The rest are mostly minor tweaks and cleanups; constification on
  Samsung platforms, cleanup of ux500 platform data, purge of other
  unused platform data/device seutp on i.MX and other good stuff.

  New SoC support this cycle is for two Allwinner platforms, H2+ and
  V3s"

* tag 'armsoc-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (55 commits)
  ARM: ux500: remove deleted file from Makefile
  ARM: ep93xx: Disable TS-72xx watchdog before uncompressing
  ARM: ux500: cut some platform data
  MAINTAINERS: Update for the current location of the bcm2835 tree.
  ARM: davinci: remove BUG_ON() from da850_register_sata()
  ARM: davinci: da850: model the SATA refclk
  ARM: davinci: da850: add con_id for the SATA clock
  ARM: davinci: da8xx-dt: add OF_DEV_AUXDATA entry for SATA
  arm: mvebu: support for SMP on 98DX3336 SoC
  dt-bindings: video: exynos7-decon: Remove obsolete samsung,power-domain property
  soc: dove: constify reset_control_ops structures
  ARM: mv78xx0: fix possible PCI buffer overflow
  MAINTAINERS: transfer maintainership for the EZX platform
  ARM: shmobile: rcar-gen2: Add more register documentation
  ARM: tegra: paz00: Fix __initdata placement
  ARM: OMAP: clock: Remove unused mpurate cmdline option
  ARM: davinci: add skeleton for pdata-quirks
  arm: sunxi: add support for V3s SoC
  ARM: OMAP2+: omap_hwmod: Add support for earlycon
  arm: hisi: drop extern hip01_cpu_die
  ...

Documentation/arm/sunxi/README

@@ -63,10 +63,18 @@ SunXi family
         + User Manual
           http://dl.linux-sunxi.org/A33/A33%20user%20manual%20release%201.1.pdf
 
+      - Allwinner H2+ (sun8i)
+        + No document available now, but is known to be working properly with
+          H3 drivers and memory map.
+
       - Allwinner H3 (sun8i)
         + Datasheet
           http://dl.linux-sunxi.org/H3/Allwinner_H3_Datasheet_V1.0.pdf
 
+      - Allwinner V3s (sun8i)
+        + Datasheet
+          http://linux-sunxi.org/File:Allwinner_V3s_Datasheet_V1.0.pdf
+
     * Quad ARM Cortex-A15, Quad ARM Cortex-A7 based SoCs
       - Allwinner A80
         + Datasheet

Documentation/devicetree/bindings/arm/cpus.txt

@@ -202,6 +202,7 @@ nodes to be present and contain the properties described below.
 			    "marvell,armada-380-smp"
 			    "marvell,armada-390-smp"
 			    "marvell,armada-xp-smp"
+			    "marvell,98dx3236-smp"
 			    "mediatek,mt6589-smp"
 			    "mediatek,mt81xx-tz-smp"
 			    "qcom,gcc-msm8660"

Documentation/devicetree/bindings/arm/marvell/98dx3236-resume-ctrl.txt

@@ -0,0 +1,16 @@
+Resume Control
+--------------
+Available on Marvell SOCs: 98DX3336 and 98DX4251
+
+Required properties:
+
+- compatible: must be "marvell,98dx3336-resume-ctrl"
+
+- reg: Should contain resume control registers location and length
+
+Example:
+
+resume@20980 {
+	compatible = "marvell,98dx3336-resume-ctrl";
+	reg = <0x20980 0x10>;
+};

Documentation/devicetree/bindings/arm/sunxi.txt

@@ -12,6 +12,7 @@ using one of the following compatible strings:
   allwinner,sun8i-a23
   allwinner,sun8i-a33
   allwinner,sun8i-a83t
+  allwinner,sun8i-h2-plus
   allwinner,sun8i-h3
   allwinner,sun9i-a80
   allwinner,sun50i-a64

Documentation/devicetree/bindings/display/exynos/exynos7-decon.txt

@@ -33,7 +33,7 @@ Required properties:
 - i80-if-timings: timing configuration for lcd i80 interface support.
 
 Optional Properties:
-- samsung,power-domain: a phandle to DECON power domain node.
+- power-domains: a phandle to DECON power domain node.
 - display-timings: timing settings for DECON, as described in document [1].
 		Can be used in case timings cannot be provided otherwise
 		or to override timings provided by the panel.

MAINTAINERS

@@ -1234,13 +1234,9 @@ S:	Maintained
 N:	efm32
 
 ARM/EZX SMARTPHONES (A780, A910, A1200, E680, ROKR E2 and ROKR E6)
-M:	Daniel Ribeiro <drwyrm@gmail.com>
-M:	Stefan Schmidt <stefan@openezx.org>
-M:	Harald Welte <laforge@openezx.org>
-L:	openezx-devel@lists.openezx.org (moderated for non-subscribers)
-W:	http://www.openezx.org/
+M:	Robert Jarzmik <robert.jarzmik@free.fr>
+L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
 S:	Maintained
-T:	topgit git://git.openezx.org/openezx.git
 F:	arch/arm/mach-pxa/ezx.c
 
 ARM/FARADAY FA526 PORT
@@ -2641,7 +2637,7 @@ M:	Lee Jones <lee@kernel.org>
 M:	Eric Anholt <eric@anholt.net>
 L:	linux-rpi-kernel@lists.infradead.org (moderated for non-subscribers)
 L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
-T:	git git://git.kernel.org/pub/scm/linux/kernel/git/rpi/linux-rpi.git
+T:	git git://github.com/anholt/linux
 S:	Maintained
 N:	bcm2835
 F:	drivers/staging/vc04_services
@@ -9023,7 +9019,20 @@ M:	Josh Poimboeuf <jpoimboe@redhat.com>
 S:	Supported
 F:	tools/objtool/
 
-OMAP SUPPORT
+OMAP1 SUPPORT
+M:	Aaro Koskinen <aaro.koskinen@iki.fi>
+M:	Tony Lindgren <tony@atomide.com>
+L:	linux-omap@vger.kernel.org
+Q:	http://patchwork.kernel.org/project/linux-omap/list/
+T:	git git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap.git
+S:	Maintained
+F:	arch/arm/mach-omap1/
+F:	arch/arm/plat-omap/
+F:	arch/arm/configs/omap1_defconfig
+F:	drivers/i2c/busses/i2c-omap.c
+F:	include/linux/i2c-omap.h
+
+OMAP2+ SUPPORT
 M:	Tony Lindgren <tony@atomide.com>
 L:	linux-omap@vger.kernel.org
 W:	http://www.muru.com/linux/omap/
@@ -9031,8 +9040,8 @@ W:	http://linux.omap.com/
 Q:	http://patchwork.kernel.org/project/linux-omap/list/
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap.git
 S:	Maintained
-F:	arch/arm/*omap*/
-F:	arch/arm/configs/omap1_defconfig
+F:	arch/arm/mach-omap2/
+F:	arch/arm/plat-omap/
 F:	arch/arm/configs/omap2plus_defconfig
 F:	drivers/i2c/busses/i2c-omap.c
 F:	drivers/irqchip/irq-omap-intc.c

arch/arm/mach-aspeed/Kconfig

@@ -5,6 +5,8 @@ menuconfig ARCH_ASPEED
 	select WATCHDOG
 	select ASPEED_WATCHDOG
 	select MOXART_TIMER
+	select MFD_SYSCON
+	select PINCTRL
 	help
 	  Say Y here if you want to run your kernel on an ASpeed BMC SoC.
 
@@ -14,6 +16,7 @@ config MACH_ASPEED_G4
 	bool "Aspeed SoC 4th Generation"
 	depends on ARCH_MULTI_V5
 	select CPU_ARM926T
+	select PINCTRL_ASPEED_G4
 	help
 	 Say yes if you intend to run on an Aspeed ast2400 or similar
 	 fourth generation BMCs, such as those used by OpenPower Power8
@@ -23,6 +26,7 @@ config MACH_ASPEED_G5
 	bool "Aspeed SoC 5th Generation"
 	depends on ARCH_MULTI_V6
 	select CPU_V6
+	select PINCTRL_ASPEED_G5
 	help
 	 Say yes if you intend to run on an Aspeed ast2500 or similar
 	 fifth generation Aspeed BMCs.

arch/arm/mach-at91/pm.c

@@ -55,7 +55,7 @@ static struct {
 	int memctrl;
 } at91_pm_data;
 
-void __iomem *at91_ramc_base[2];
+static void __iomem *at91_ramc_base[2];
 
 static int at91_pm_valid_state(suspend_state_t state)
 {

arch/arm/mach-at91/pm.h

@@ -18,8 +18,6 @@
 #include <soc/at91/at91sam9_sdramc.h>
 
 #ifndef __ASSEMBLY__
-extern void __iomem *at91_ramc_base[];
-
 #define at91_ramc_read(id, field) \
 	__raw_readl(at91_ramc_base[id] + field)
 

arch/arm/mach-davinci/Makefile

@@ -21,7 +21,7 @@ obj-$(CONFIG_AINTC)			+= irq.o
 obj-$(CONFIG_CP_INTC)			+= cp_intc.o
 
 # Board specific
-obj-$(CONFIG_MACH_DA8XX_DT)		+= da8xx-dt.o
+obj-$(CONFIG_MACH_DA8XX_DT)		+= da8xx-dt.o pdata-quirks.o
 obj-$(CONFIG_MACH_DAVINCI_EVM)  	+= board-dm644x-evm.o
 obj-$(CONFIG_MACH_SFFSDR)		+= board-sffsdr.o
 obj-$(CONFIG_MACH_NEUROS_OSD2)		+= board-neuros-osd2.o

arch/arm/mach-davinci/da850.c

@@ -563,7 +563,7 @@ static struct clk_lookup da850_clks[] = {
 	CLK("spi_davinci.0",	NULL,		&spi0_clk),
 	CLK("spi_davinci.1",	NULL,		&spi1_clk),
 	CLK("vpif",		NULL,		&vpif_clk),
-	CLK("ahci_da850",	NULL,		&sata_clk),
+	CLK("ahci_da850",	"fck",		&sata_clk),
 	CLK("davinci-rproc.0",	NULL,		&dsp_clk),
 	CLK(NULL,		NULL,		&ehrpwm_clk),
 	CLK("ehrpwm.0",		"fck",		&ehrpwm0_clk),

arch/arm/mach-davinci/da8xx-dt.c

@@ -52,6 +52,7 @@ static struct of_dev_auxdata da850_auxdata_lookup[] __initdata = {
 	OF_DEV_AUXDATA("ti,da830-ohci", 0x01e25000, "ohci-da8xx", NULL),
 	OF_DEV_AUXDATA("ti,da830-musb", 0x01e00000, "musb-da8xx", NULL),
 	OF_DEV_AUXDATA("ti,da830-usb-phy", 0x01c1417c, "da8xx-usb-phy", NULL),
+	OF_DEV_AUXDATA("ti,da850-ahci", 0x01e18000, "ahci_da850", NULL),
 	{}
 };
 
@@ -59,6 +60,9 @@ static struct of_dev_auxdata da850_auxdata_lookup[] __initdata = {
 
 static void __init da850_init_machine(void)
 {
+	/* All existing boards use 100MHz SATA refclkpn */
+	static const unsigned long sata_refclkpn = 100 * 1000 * 1000;
+
 	int ret;
 
 	ret = da8xx_register_usb20_phy_clk(false);
@@ -70,8 +74,14 @@ static void __init da850_init_machine(void)
 		pr_warn("%s: registering USB 1.1 PHY clock failed: %d",
 			__func__, ret);
 
+	ret = da850_register_sata_refclk(sata_refclkpn);
+	if (ret)
+		pr_warn("%s: registering SATA REFCLK failed: %d",
+			__func__, ret);
+
 	of_platform_default_populate(NULL, da850_auxdata_lookup, NULL);
 	davinci_pm_init();
+	pdata_quirks_init();
 }
 
 static const char *const da850_boards_compat[] __initconst = {

arch/arm/mach-davinci/devices-da8xx.c

@@ -24,6 +24,7 @@
 #include <mach/common.h>
 #include <mach/time.h>
 #include <mach/da8xx.h>
+#include <mach/clock.h>
 #include "cpuidle.h"
 #include "sram.h"
 
@@ -1023,6 +1024,28 @@ int __init da8xx_register_spi_bus(int instance, unsigned num_chipselect)
 }
 
 #ifdef CONFIG_ARCH_DAVINCI_DA850
+static struct clk sata_refclk = {
+	.name		= "sata_refclk",
+	.set_rate	= davinci_simple_set_rate,
+};
+
+static struct clk_lookup sata_refclk_lookup =
+		CLK("ahci_da850", "refclk", &sata_refclk);
+
+int __init da850_register_sata_refclk(int rate)
+{
+	int ret;
+
+	sata_refclk.rate = rate;
+	ret = clk_register(&sata_refclk);
+	if (ret)
+		return ret;
+
+	clkdev_add(&sata_refclk_lookup);
+
+	return 0;
+}
+
 static struct resource da850_sata_resources[] = {
 	{
 		.start	= DA850_SATA_BASE,
@@ -1055,8 +1078,11 @@ static struct platform_device da850_sata_device = {
 
 int __init da850_register_sata(unsigned long refclkpn)
 {
-	/* please see comment in drivers/ata/ahci_da850.c */
-	BUG_ON(refclkpn != 100 * 1000 * 1000);
+	int ret;
+
+	ret = da850_register_sata_refclk(refclkpn);
+	if (ret)
+		return ret;
 
 	return platform_device_register(&da850_sata_device);
 }

arch/arm/mach-davinci/include/mach/common.h

@@ -102,6 +102,8 @@ int davinci_pm_init(void);
 static inline int davinci_pm_init(void) { return 0; }
 #endif
 
+void __init pdata_quirks_init(void);
+
 #define SRAM_SIZE	SZ_128K
 
 #endif /* __ARCH_ARM_MACH_DAVINCI_COMMON_H */

arch/arm/mach-davinci/include/mach/da8xx.h

@@ -95,6 +95,7 @@ int da8xx_register_usb11(struct da8xx_ohci_root_hub *pdata);
 int da8xx_register_usb_refclkin(int rate);
 int da8xx_register_usb20_phy_clk(bool use_usb_refclkin);
 int da8xx_register_usb11_phy_clk(bool use_usb_refclkin);
+int da850_register_sata_refclk(int rate);
 int da8xx_register_emac(void);
 int da8xx_register_uio_pruss(void);
 int da8xx_register_lcdc(struct da8xx_lcdc_platform_data *pdata);

arch/arm/mach-davinci/pdata-quirks.c

@@ -0,0 +1,39 @@
+/*
+ * Legacy platform_data quirks
+ *
+ * Copyright (C) 2016 BayLibre, Inc
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#include <linux/kernel.h>
+#include <linux/of_platform.h>
+
+#include <mach/common.h>
+
+struct pdata_init {
+	const char *compatible;
+	void (*fn)(void);
+};
+
+static void pdata_quirks_check(struct pdata_init *quirks)
+{
+	while (quirks->compatible) {
+		if (of_machine_is_compatible(quirks->compatible)) {
+			if (quirks->fn)
+				quirks->fn();
+			break;
+		}
+		quirks++;
+	}
+}
+
+static struct pdata_init pdata_quirks[] __initdata = {
+	{ /* sentinel */ },
+};
+
+void __init pdata_quirks_init(void)
+{
+	pdata_quirks_check(pdata_quirks);
+}

arch/arm/mach-ep93xx/include/mach/uncompress.h

@@ -10,6 +10,7 @@
  */
 
 #include <mach/ep93xx-regs.h>
+#include <asm/mach-types.h>
 
 static unsigned char __raw_readb(unsigned int ptr)
 {
@@ -75,8 +76,19 @@ static void ethernet_reset(void)
 		;
 }
 
+#define TS72XX_WDT_CONTROL_PHYS_BASE	0x23800000
+#define TS72XX_WDT_FEED_PHYS_BASE	0x23c00000
+#define TS72XX_WDT_FEED_VAL		0x05
+
+static void __maybe_unused ts72xx_watchdog_disable(void)
+{
+	__raw_writeb(TS72XX_WDT_FEED_VAL, TS72XX_WDT_FEED_PHYS_BASE);
+	__raw_writeb(0, TS72XX_WDT_CONTROL_PHYS_BASE);
+}
 
 static void arch_decomp_setup(void)
 {
+	if (machine_is_ts72xx())
+		ts72xx_watchdog_disable();
 	ethernet_reset();
 }

arch/arm/mach-exynos/Kconfig

@@ -95,11 +95,6 @@ config SOC_EXYNOS4412
 	default y
 	depends on ARCH_EXYNOS4
 
-config SOC_EXYNOS4415
-	bool "SAMSUNG EXYNOS4415"
-	default y
-	depends on ARCH_EXYNOS4
-
 config SOC_EXYNOS5250
 	bool "SAMSUNG EXYNOS5250"
 	default y

arch/arm/mach-exynos/exynos.c

@@ -45,8 +45,8 @@ static struct platform_device exynos_cpuidle = {
 	.id                = -1,
 };
 
-void __iomem *sysram_base_addr;
-void __iomem *sysram_ns_base_addr;
+void __iomem *sysram_base_addr __ro_after_init;
+void __iomem *sysram_ns_base_addr __ro_after_init;
 
 void __init exynos_sysram_init(void)
 {
@@ -210,7 +210,6 @@ static char const *const exynos_dt_compat[] __initconst = {
 	"samsung,exynos4210",
 	"samsung,exynos4212",
 	"samsung,exynos4412",
-	"samsung,exynos4415",
 	"samsung,exynos5",
 	"samsung,exynos5250",
 	"samsung,exynos5260",

arch/arm/mach-exynos/mcpm-exynos.c

@@ -32,7 +32,7 @@
 #define EXYNOS5420_USE_ARM_CORE_DOWN_STATE	BIT(29)
 #define EXYNOS5420_USE_L2_COMMON_UP_STATE	BIT(30)
 
-static void __iomem *ns_sram_base_addr;
+static void __iomem *ns_sram_base_addr __ro_after_init;
 
 /*
  * The common v7_exit_coherency_flush API could not be used because of the

arch/arm/mach-exynos/suspend.c

@@ -65,7 +65,7 @@ struct exynos_pm_data {
 	int (*cpu_suspend)(unsigned long);
 };
 
-static const struct exynos_pm_data *pm_data;
+static const struct exynos_pm_data *pm_data __ro_after_init;
 
 static int exynos5420_cpu_state;
 static unsigned int exynos_pmu_spare3;
@@ -228,7 +228,6 @@ EXYNOS_PMU_IRQ(exynos3250_pmu_irq, "samsung,exynos3250-pmu");
 EXYNOS_PMU_IRQ(exynos4210_pmu_irq, "samsung,exynos4210-pmu");
 EXYNOS_PMU_IRQ(exynos4212_pmu_irq, "samsung,exynos4212-pmu");
 EXYNOS_PMU_IRQ(exynos4412_pmu_irq, "samsung,exynos4412-pmu");
-EXYNOS_PMU_IRQ(exynos4415_pmu_irq, "samsung,exynos4415-pmu");
 EXYNOS_PMU_IRQ(exynos5250_pmu_irq, "samsung,exynos5250-pmu");
 EXYNOS_PMU_IRQ(exynos5420_pmu_irq, "samsung,exynos5420-pmu");
 

arch/arm/mach-hisi/core.h

@@ -15,5 +15,4 @@ extern void hix5hd2_set_cpu(int cpu, bool enable);
 extern void hix5hd2_cpu_die(unsigned int cpu);
 
 extern void hip01_set_cpu(int cpu, bool enable);
-extern void hip01_cpu_die(unsigned int cpu);
 #endif

arch/arm/mach-imx/devices/platform-flexcan.c

@@ -19,15 +19,6 @@
 #define imx_flexcan_data_entry(soc, _id, _hwid, _size)			\
 	[_id] = imx_flexcan_data_entry_single(soc, _id, _hwid, _size)
 
-#ifdef CONFIG_SOC_IMX25
-const struct imx_flexcan_data imx25_flexcan_data[] __initconst = {
-#define imx25_flexcan_data_entry(_id, _hwid)				\
-	imx_flexcan_data_entry(MX25, _id, _hwid, SZ_16K)
-	imx25_flexcan_data_entry(0, 1),
-	imx25_flexcan_data_entry(1, 2),
-};
-#endif /* ifdef CONFIG_SOC_IMX25 */
-
 #ifdef CONFIG_SOC_IMX35
 const struct imx_flexcan_data imx35_flexcan_data[] __initconst = {
 #define imx35_flexcan_data_entry(_id, _hwid)				\

arch/arm/mach-imx/devices/platform-sdhci-esdhc-imx.c

@@ -22,16 +22,6 @@
 #define imx_sdhci_esdhc_imx_data_entry(soc, devid, id, hwid)	\
 	[id] = imx_sdhci_esdhc_imx_data_entry_single(soc, devid, id, hwid)
 
-#ifdef CONFIG_SOC_IMX25
-const struct imx_sdhci_esdhc_imx_data
-imx25_sdhci_esdhc_imx_data[] __initconst = {
-#define imx25_sdhci_esdhc_imx_data_entry(_id, _hwid)			\
-	imx_sdhci_esdhc_imx_data_entry(MX25, "sdhci-esdhc-imx25", _id, _hwid)
-	imx25_sdhci_esdhc_imx_data_entry(0, 1),
-	imx25_sdhci_esdhc_imx_data_entry(1, 2),
-};
-#endif /* ifdef CONFIG_SOC_IMX25 */
-
 #ifdef CONFIG_SOC_IMX35
 const struct imx_sdhci_esdhc_imx_data
 imx35_sdhci_esdhc_imx_data[] __initconst = {

arch/arm/mach-imx/mach-mx27_3ds.c

@@ -31,7 +31,6 @@
 #include <linux/regulator/machine.h>
 #include <linux/spi/l4f00242t03.h>
 
-#include <media/soc_camera.h>
 
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
@@ -53,8 +52,6 @@
 #define SD1_CD			IMX_GPIO_NR(2, 26)
 #define LCD_RESET		IMX_GPIO_NR(1, 3)
 #define LCD_ENABLE		IMX_GPIO_NR(1, 31)
-#define CSI_PWRDWN		IMX_GPIO_NR(4, 19)
-#define CSI_RESET		IMX_GPIO_NR(3, 6)
 
 static const int mx27pdk_pins[] __initconst = {
 	/* UART1 */
@@ -144,21 +141,6 @@ static const int mx27pdk_pins[] __initconst = {
 	PA30_PF_CONTRAST,
 	LCD_ENABLE | GPIO_GPIO | GPIO_OUT,
 	LCD_RESET | GPIO_GPIO | GPIO_OUT,
-	/* CSI */
-	PB10_PF_CSI_D0,
-	PB11_PF_CSI_D1,
-	PB12_PF_CSI_D2,
-	PB13_PF_CSI_D3,
-	PB14_PF_CSI_D4,
-	PB15_PF_CSI_MCLK,
-	PB16_PF_CSI_PIXCLK,
-	PB17_PF_CSI_D5,
-	PB18_PF_CSI_D6,
-	PB19_PF_CSI_D7,
-	PB20_PF_CSI_VSYNC,
-	PB21_PF_CSI_HSYNC,
-	CSI_PWRDWN | GPIO_GPIO | GPIO_OUT,
-	CSI_RESET | GPIO_GPIO | GPIO_OUT,
 	/* SSI4 */
 	PC16_PF_SSI4_FS,
 	PC17_PF_SSI4_RXD,
@@ -166,11 +148,6 @@ static const int mx27pdk_pins[] __initconst = {
 	PC19_PF_SSI4_CLK,
 };
 
-static struct gpio mx27_3ds_camera_gpios[] = {
-	{ CSI_PWRDWN, GPIOF_OUT_INIT_HIGH, "camera-power" },
-	{ CSI_RESET, GPIOF_OUT_INIT_HIGH, "camera-reset" },
-};
-
 static const struct imxuart_platform_data uart_pdata __initconst = {
 	.flags = IMXUART_HAVE_RTSCTS,
 };
@@ -270,7 +247,6 @@ static struct regulator_init_data gpo_init = {
 
 static struct regulator_consumer_supply vmmc1_consumers[] = {
 	REGULATOR_SUPPLY("vcore", "spi0.0"),
-	REGULATOR_SUPPLY("cmos_2v8", "soc-camera-pdrv.0"),
 };
 
 static struct regulator_init_data vmmc1_init = {
@@ -299,22 +275,6 @@ static struct regulator_init_data vgen_init = {
 	.consumer_supplies = vgen_consumers,
 };
 
-static struct regulator_consumer_supply vvib_consumers[] = {
-	REGULATOR_SUPPLY("cmos_vcore", "soc-camera-pdrv.0"),
-};
-
-static struct regulator_init_data vvib_init = {
-	.constraints = {
-		.min_uV = 1300000,
-		.max_uV = 1300000,
-		.apply_uV = 1,
-		.valid_ops_mask = REGULATOR_CHANGE_VOLTAGE |
-				  REGULATOR_CHANGE_STATUS,
-	},
-	.num_consumer_supplies = ARRAY_SIZE(vvib_consumers),
-	.consumer_supplies = vvib_consumers,
-};
-
 static struct mc13xxx_regulator_init_data mx27_3ds_regulators[] = {
 	{
 		.id = MC13783_REG_VMMC1,
@@ -328,9 +288,6 @@ static struct mc13xxx_regulator_init_data mx27_3ds_regulators[] = {
 	}, {
 		.id = MC13783_REG_GPO3, /* Turn on 3.3V */
 		.init_data = &gpo_init,
-	}, {
-		.id = MC13783_REG_VVIB,  /* Power OV2640 */
-		.init_data = &vvib_init,
 	},
 };
 
@@ -370,51 +327,6 @@ static const struct spi_imx_master spi2_pdata __initconst = {
 	.num_chipselect	= ARRAY_SIZE(spi2_chipselect),
 };
 
-static int mx27_3ds_camera_power(struct device *dev, int on)
-{
-	/* enable or disable the camera */
-	pr_debug("%s: %s the camera\n", __func__, on ? "ENABLE" : "DISABLE");
-	gpio_set_value(CSI_PWRDWN, on ? 0 : 1);
-
-	if (!on)
-		goto out;
-
-	/* If enabled, give a reset impulse */
-	gpio_set_value(CSI_RESET, 0);
-	msleep(20);
-	gpio_set_value(CSI_RESET, 1);
-	msleep(100);
-
-out:
-	return 0;
-}
-
-static struct i2c_board_info mx27_3ds_i2c_camera = {
-	I2C_BOARD_INFO("ov2640", 0x30),
-};
-
-static struct regulator_bulk_data mx27_3ds_camera_regs[] = {
-	{ .supply = "cmos_vcore" },
-	{ .supply = "cmos_2v8" },
-};
-
-static struct soc_camera_link iclink_ov2640 = {
-	.bus_id		= 0,
-	.board_info	= &mx27_3ds_i2c_camera,
-	.i2c_adapter_id	= 0,
-	.power		= mx27_3ds_camera_power,
-	.regulators	= mx27_3ds_camera_regs,
-	.num_regulators	= ARRAY_SIZE(mx27_3ds_camera_regs),
-};
-
-static struct platform_device mx27_3ds_ov2640 = {
-	.name	= "soc-camera-pdrv",
-	.id	= 0,
-	.dev	= {
-		.platform_data = &iclink_ov2640,
-	},
-};
-
 static struct imx_fb_videomode mx27_3ds_modes[] = {
 	{	/* 480x640 @ 60 Hz */
 		.mode = {
@@ -471,14 +383,6 @@ static struct spi_board_info mx27_3ds_spi_devs[] __initdata = {
 	},
 };
 
-static struct platform_device *devices[] __initdata = {
-	&mx27_3ds_ov2640,
-};
-
-static const struct mx2_camera_platform_data mx27_3ds_cam_pdata __initconst = {
-	.clk = 26000000,
-};
-
 static const struct imxi2c_platform_data mx27_3ds_i2c0_data __initconst = {
 	.bitrate = 100000,
 };
@@ -498,7 +402,6 @@ static void __init mx27pdk_init(void)
 	imx27_add_spi_imx0(&spi1_pdata);
 
 	imx27_add_imx_i2c(0, &mx27_3ds_i2c0_data);
-	platform_add_devices(devices, ARRAY_SIZE(devices));
 	imx27_add_imx_fb(&mx27_3ds_fb_data);
 
 	imx27_add_imx_ssi(0, &mx27_3ds_ssi_pdata);
@@ -506,8 +409,6 @@ static void __init mx27pdk_init(void)
 
 static void __init mx27pdk_late_init(void)
 {
-	int ret;
-
 	mx27_3ds_sdhc1_enable_level_translator();
 	imx27_add_mxc_mmc(0, &sdhc1_pdata);
 
@@ -531,14 +432,6 @@ static void __init mx27pdk_late_init(void)
 	if (mxc_expio_init(MX27_CS5_BASE_ADDR, IMX_GPIO_NR(3, 28)))
 		pr_warn("Init of the debugboard failed, all devices on the debugboard are unusable.\n");
 
-	ret = gpio_request_array(mx27_3ds_camera_gpios,
-				 ARRAY_SIZE(mx27_3ds_camera_gpios));
-	if (ret) {
-		pr_err("Failed to request camera gpios");
-		iclink_ov2640.power = NULL;
-	}
-
-	imx27_add_mx2_camera(&mx27_3ds_cam_pdata);
 
 	imx_add_platform_device("imx_mc13783", 0, NULL, 0, NULL, 0);
 }

arch/arm/mach-imx/mach-mx31_3ds.c

@@ -26,16 +26,12 @@
 #include <linux/regulator/machine.h>
 #include <linux/usb/otg.h>
 #include <linux/usb/ulpi.h>
-#include <linux/memblock.h>
-
-#include <media/soc_camera.h>
 
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/time.h>
 #include <asm/memory.h>
 #include <asm/mach/map.h>
-#include <asm/memblock.h>
 
 #include "3ds_debugboard.h"
 #include "common.h"
@@ -137,23 +133,6 @@ static int mx31_3ds_pins[] = {
 	MX31_PIN_HSYNC__HSYNC,
 	MX31_PIN_FPSHIFT__FPSHIFT,
 	MX31_PIN_CONTRAST__CONTRAST,
-	/* CSI */
-	MX31_PIN_CSI_D6__CSI_D6,
-	MX31_PIN_CSI_D7__CSI_D7,
-	MX31_PIN_CSI_D8__CSI_D8,
-	MX31_PIN_CSI_D9__CSI_D9,
-	MX31_PIN_CSI_D10__CSI_D10,
-	MX31_PIN_CSI_D11__CSI_D11,
-	MX31_PIN_CSI_D12__CSI_D12,
-	MX31_PIN_CSI_D13__CSI_D13,
-	MX31_PIN_CSI_D14__CSI_D14,
-	MX31_PIN_CSI_D15__CSI_D15,
-	MX31_PIN_CSI_HSYNC__CSI_HSYNC,
-	MX31_PIN_CSI_MCLK__CSI_MCLK,
-	MX31_PIN_CSI_PIXCLK__CSI_PIXCLK,
-	MX31_PIN_CSI_VSYNC__CSI_VSYNC,
-	MX31_PIN_CSI_D5__GPIO3_5, /* CMOS PWDN */
-	IOMUX_MODE(MX31_PIN_RI_DTE1, IOMUX_CONFIG_GPIO), /* CMOS reset */
 	/* SSI */
 	MX31_PIN_STXD4__STXD4,
 	MX31_PIN_SRXD4__SRXD4,
@@ -161,98 +140,6 @@ static int mx31_3ds_pins[] = {
 	MX31_PIN_SFS4__SFS4,
 };
 
-/*
- * Camera support
- */
-static phys_addr_t mx3_camera_base __initdata;
-#define MX31_3DS_CAMERA_BUF_SIZE SZ_8M
-
-#define MX31_3DS_GPIO_CAMERA_PW IOMUX_TO_GPIO(MX31_PIN_CSI_D5)
-#define MX31_3DS_GPIO_CAMERA_RST IOMUX_TO_GPIO(MX31_PIN_RI_DTE1)
-
-static struct gpio mx31_3ds_camera_gpios[] = {
-	{ MX31_3DS_GPIO_CAMERA_PW, GPIOF_OUT_INIT_HIGH, "camera-power" },
-	{ MX31_3DS_GPIO_CAMERA_RST, GPIOF_OUT_INIT_HIGH, "camera-reset" },
-};
-
-static const struct mx3_camera_pdata mx31_3ds_camera_pdata __initconst = {
-	.flags = MX3_CAMERA_DATAWIDTH_10,
-	.mclk_10khz = 2600,
-};
-
-static int __init mx31_3ds_init_camera(void)
-{
-	int dma, ret = -ENOMEM;
-	struct platform_device *pdev =
-		imx31_alloc_mx3_camera(&mx31_3ds_camera_pdata);
-
-	if (IS_ERR(pdev))
-		return PTR_ERR(pdev);
-
-	if (!mx3_camera_base)
-		goto err;
-
-	dma = dma_declare_coherent_memory(&pdev->dev,
-					mx3_camera_base, mx3_camera_base,
-					MX31_3DS_CAMERA_BUF_SIZE,
-					DMA_MEMORY_MAP | DMA_MEMORY_EXCLUSIVE);
-
-	if (!(dma & DMA_MEMORY_MAP))
-		goto err;
-
-	ret = platform_device_add(pdev);
-	if (ret)
-err:
-		platform_device_put(pdev);
-
-	return ret;
-}
-
-static int mx31_3ds_camera_power(struct device *dev, int on)
-{
-	/* enable or disable the camera */
-	pr_debug("%s: %s the camera\n", __func__, on ? "ENABLE" : "DISABLE");
-	gpio_set_value(MX31_3DS_GPIO_CAMERA_PW, on ? 0 : 1);
-
-	if (!on)
-		goto out;
-
-	/* If enabled, give a reset impulse */
-	gpio_set_value(MX31_3DS_GPIO_CAMERA_RST, 0);
-	msleep(20);
-	gpio_set_value(MX31_3DS_GPIO_CAMERA_RST, 1);
-	msleep(100);
-
-out:
-	return 0;
-}
-
-static struct i2c_board_info mx31_3ds_i2c_camera = {
-	I2C_BOARD_INFO("ov2640", 0x30),
-};
-
-static struct regulator_bulk_data mx31_3ds_camera_regs[] = {
-	{ .supply = "cmos_vcore" },
-	{ .supply = "cmos_2v8" },
-};
-
-static struct soc_camera_link iclink_ov2640 = {
-	.bus_id		= 0,
-	.board_info	= &mx31_3ds_i2c_camera,
-	.i2c_adapter_id	= 0,
-	.power		= mx31_3ds_camera_power,
-	.regulators	= mx31_3ds_camera_regs,
-	.num_regulators	= ARRAY_SIZE(mx31_3ds_camera_regs),
-};
-
-static struct platform_device mx31_3ds_ov2640 = {
-	.name	= "soc-camera-pdrv",
-	.id	= 0,
-	.dev	= {
-		.platform_data = &iclink_ov2640,
-	},
-};
-
 /*
  * FB support
  */
@@ -410,7 +297,6 @@ static struct regulator_init_data vmmc2_init = {
 
 static struct regulator_consumer_supply vmmc1_consumers[] = {
 	REGULATOR_SUPPLY("vcore", "spi0.0"),
-	REGULATOR_SUPPLY("cmos_2v8", "soc-camera-pdrv.0"),
 };
 
 static struct regulator_init_data vmmc1_init = {
@@ -441,22 +327,6 @@ static struct regulator_init_data vgen_init = {
 	.consumer_supplies = vgen_consumers,
 };
 
-static struct regulator_consumer_supply vvib_consumers[] = {
-	REGULATOR_SUPPLY("cmos_vcore", "soc-camera-pdrv.0"),
-};
-
-static struct regulator_init_data vvib_init = {
-	.constraints = {
-		.min_uV = 1300000,
-		.max_uV = 1300000,
-		.apply_uV = 1,
-		.valid_ops_mask = REGULATOR_CHANGE_VOLTAGE |
-				  REGULATOR_CHANGE_STATUS,
-	},
-	.num_consumer_supplies = ARRAY_SIZE(vvib_consumers),
-	.consumer_supplies = vvib_consumers,
-};
-
 static struct mc13xxx_regulator_init_data mx31_3ds_regulators[] = {
 	{
 		.id = MC13783_REG_PWGT1SPI, /* Power Gate for ARM core. */
@@ -480,9 +350,6 @@ static struct mc13xxx_regulator_init_data mx31_3ds_regulators[] = {
 	}, {
 		.id = MC13783_REG_VGEN,  /* Power LCD */
 		.init_data = &vgen_init,
-	}, {
-		.id = MC13783_REG_VVIB,  /* Power CMOS */
-		.init_data = &vvib_init,
 	},
 };
 
@@ -688,10 +555,6 @@ static const struct imxi2c_platform_data mx31_3ds_i2c0_data __initconst = {
 	.bitrate = 100000,
 };
 
-static struct platform_device *devices[] __initdata = {
-	&mx31_3ds_ov2640,
-};
-
 static void __init mx31_3ds_init(void)
 {
 	imx31_soc_init();
@@ -723,14 +586,10 @@ static void __init mx31_3ds_init(void)
 
 static void __init mx31_3ds_late(void)
 {
-	int ret;
-
 	mx31_3ds_spi_devs[0].irq = gpio_to_irq(IOMUX_TO_GPIO(MX31_PIN_GPIO1_3));
 	spi_register_board_info(mx31_3ds_spi_devs,
 				ARRAY_SIZE(mx31_3ds_spi_devs));
 
-	platform_add_devices(devices, ARRAY_SIZE(devices));
-
 	mx31_3ds_usbotg_init();
 	if (otg_mode_host) {
 		otg_pdata.otg = imx_otg_ulpi_create(ULPI_OTG_DRVVBUS |
@@ -751,17 +610,6 @@ static void __init mx31_3ds_late(void)
 		       "devices on the debug board are unusable.\n");
 
 	imx31_add_mxc_mmc(0, &sdhc1_pdata);
-
-	/* CSI */
-	/* Camera power: default - off */
-	ret = gpio_request_array(mx31_3ds_camera_gpios,
-				 ARRAY_SIZE(mx31_3ds_camera_gpios));
-	if (ret) {
-		pr_err("Failed to request camera gpios");
-		iclink_ov2640.power = NULL;
-	}
-
-	mx31_3ds_init_camera();
 }
 
 static void __init mx31_3ds_timer_init(void)
@@ -769,13 +617,6 @@ static void __init mx31_3ds_timer_init(void)
 	mx31_clocks_init(26000000);
 }
 
-static void __init mx31_3ds_reserve(void)
-{
-	/* reserve MX31_3DS_CAMERA_BUF_SIZE bytes for mx3-camera */
-	mx3_camera_base = arm_memblock_steal(MX31_3DS_CAMERA_BUF_SIZE,
-					 MX31_3DS_CAMERA_BUF_SIZE);
-}
-
 MACHINE_START(MX31_3DS, "Freescale MX31PDK (3DS)")
 	/* Maintainer: Freescale Semiconductor, Inc. */
 	.atag_offset = 0x100,
@@ -785,6 +626,5 @@ MACHINE_START(MX31_3DS, "Freescale MX31PDK (3DS)")
 	.init_time	= mx31_3ds_timer_init,
 	.init_machine = mx31_3ds_init,
 	.init_late	= mx31_3ds_late,
-	.reserve = mx31_3ds_reserve,
 	.restart	= mxc_restart,
 MACHINE_END

arch/arm/mach-imx/mach-mx35_3ds.c

@@ -41,12 +41,9 @@
 #include <asm/mach/arch.h>
 #include <asm/mach/time.h>
 #include <asm/mach/map.h>
-#include <asm/memblock.h>
 
 #include <video/platform_lcd.h>
 
-#include <media/soc_camera.h>
-
 #include "3ds_debugboard.h"
 #include "common.h"
 #include "devices-imx35.h"
@@ -233,83 +230,10 @@ static const iomux_v3_cfg_t mx35pdk_pads[] __initconst = {
 	MX35_PAD_D3_VSYNC__IPU_DISPB_D3_VSYNC,
 	MX35_PAD_D3_REV__IPU_DISPB_D3_REV,
 	MX35_PAD_D3_CLS__IPU_DISPB_D3_CLS,
-	/* CSI */
-	MX35_PAD_TX1__IPU_CSI_D_6,
-	MX35_PAD_TX0__IPU_CSI_D_7,
-	MX35_PAD_CSI_D8__IPU_CSI_D_8,
-	MX35_PAD_CSI_D9__IPU_CSI_D_9,
-	MX35_PAD_CSI_D10__IPU_CSI_D_10,
-	MX35_PAD_CSI_D11__IPU_CSI_D_11,
-	MX35_PAD_CSI_D12__IPU_CSI_D_12,
-	MX35_PAD_CSI_D13__IPU_CSI_D_13,
-	MX35_PAD_CSI_D14__IPU_CSI_D_14,
-	MX35_PAD_CSI_D15__IPU_CSI_D_15,
-	MX35_PAD_CSI_HSYNC__IPU_CSI_HSYNC,
-	MX35_PAD_CSI_MCLK__IPU_CSI_MCLK,
-	MX35_PAD_CSI_PIXCLK__IPU_CSI_PIXCLK,
-	MX35_PAD_CSI_VSYNC__IPU_CSI_VSYNC,
 	/*PMIC IRQ*/
 	MX35_PAD_GPIO2_0__GPIO2_0,
 };
 
-/*
- * Camera support
-*/
-static phys_addr_t mx3_camera_base __initdata;
-#define MX35_3DS_CAMERA_BUF_SIZE SZ_8M
-
-static const struct mx3_camera_pdata mx35_3ds_camera_pdata __initconst = {
-	.flags = MX3_CAMERA_DATAWIDTH_8,
-	.mclk_10khz = 2000,
-};
-
-static int __init imx35_3ds_init_camera(void)
-{
-	int dma, ret = -ENOMEM;
-	struct platform_device *pdev =
-		imx35_alloc_mx3_camera(&mx35_3ds_camera_pdata);
-
-	if (IS_ERR(pdev))
-		return PTR_ERR(pdev);
-
-	if (!mx3_camera_base)
-		goto err;
-
-	dma = dma_declare_coherent_memory(&pdev->dev,
-					mx3_camera_base, mx3_camera_base,
-					MX35_3DS_CAMERA_BUF_SIZE,
-					DMA_MEMORY_MAP | DMA_MEMORY_EXCLUSIVE);
-
-	if (!(dma & DMA_MEMORY_MAP))
-		goto err;
-
-	ret = platform_device_add(pdev);
-	if (ret)
-err:
-		platform_device_put(pdev);
-
-	return ret;
-}
-
-static struct i2c_board_info mx35_3ds_i2c_camera = {
-	I2C_BOARD_INFO("ov2640", 0x30),
-};
-
-static struct soc_camera_link iclink_ov2640 = {
-	.bus_id		= 0,
-	.board_info	= &mx35_3ds_i2c_camera,
-	.i2c_adapter_id	= 0,
-	.power		= NULL,
-};
-
-static struct platform_device mx35_3ds_ov2640 = {
-	.name	= "soc-camera-pdrv",
-	.id	= 0,
-	.dev	= {
-		.platform_data = &iclink_ov2640,
-	},
-};
-
 static struct regulator_consumer_supply sw1_consumers[] = {
 	{
 		.supply = "cpu_vcc",
@@ -321,10 +245,6 @@ static struct regulator_consumer_supply vcam_consumers[] = {
 	REGULATOR_SUPPLY("VDDA", "0-000a"),
 };
 
-static struct regulator_consumer_supply vaudio_consumers[] = {
-	REGULATOR_SUPPLY("cmos_vio", "soc-camera-pdrv.0"),
-};
-
 static struct regulator_init_data sw1_init = {
 	.constraints = {
 		.name = "SW1",
@@ -405,18 +325,6 @@ static struct regulator_init_data vvideo_init = {
 	}
 };
 
-static struct regulator_init_data vaudio_init = {
-	.constraints = {
-		.name = "VAUDIO",
-		.min_uV = 2300000,
-		.max_uV = 3000000,
-		.valid_ops_mask = REGULATOR_CHANGE_VOLTAGE,
-		.boot_on = 1
-	},
-	.num_consumer_supplies = ARRAY_SIZE(vaudio_consumers),
-	.consumer_supplies = vaudio_consumers,
-};
-
 static struct regulator_init_data vcam_init = {
 	.constraints = {
 		.name = "VCAM",
@@ -460,7 +368,6 @@ static struct mc13xxx_regulator_init_data mx35_3ds_regulators[] = {
 	{ .id = MC13892_VDIG, .init_data = &vdig_init },
 	{ .id = MC13892_VUSB2, .init_data = &vusb2_init },
 	{ .id = MC13892_VVIDEO, .init_data = &vvideo_init },
-	{ .id = MC13892_VAUDIO, .init_data = &vaudio_init },
 	{ .id = MC13892_VCAM, .init_data = &vcam_init },
 	{ .id = MC13892_VGEN1, .init_data = &vgen1_init },
 	{ .id = MC13892_VGEN2, .init_data = &vgen2_init },
@@ -583,8 +490,6 @@ static void __init mx35_3ds_init(void)
 		0, i2c_devices_3ds, ARRAY_SIZE(i2c_devices_3ds));
 
 	imx35_add_ipu_core();
-	platform_device_register(&mx35_3ds_ov2640);
-	imx35_3ds_init_camera();
 }
 
 static void __init mx35_3ds_late_init(void)
@@ -607,13 +512,6 @@ static void __init mx35pdk_timer_init(void)
 	mx35_clocks_init();
 }
 
-static void __init mx35_3ds_reserve(void)
-{
-	/* reserve MX35_3DS_CAMERA_BUF_SIZE bytes for mx3-camera */
-	mx3_camera_base = arm_memblock_steal(MX35_3DS_CAMERA_BUF_SIZE,
-					 MX35_3DS_CAMERA_BUF_SIZE);
-}
-
 MACHINE_START(MX35_3DS, "Freescale MX35PDK")
 	/* Maintainer: Freescale Semiconductor, Inc */
 	.atag_offset = 0x100,
@@ -623,6 +521,5 @@ MACHINE_START(MX35_3DS, "Freescale MX35PDK")
 	.init_time	= mx35pdk_timer_init,
 	.init_machine = mx35_3ds_init,
 	.init_late	= mx35_3ds_late_init,
-	.reserve = mx35_3ds_reserve,
 	.restart	= mxc_restart,
 MACHINE_END

arch/arm/mach-imx/mach-pcm037.c

@@ -31,17 +31,13 @@
 #include <linux/usb/otg.h>
 #include <linux/usb/ulpi.h>
 #include <linux/gfp.h>
-#include <linux/memblock.h>
 #include <linux/regulator/machine.h>
 #include <linux/regulator/fixed.h>
 
-#include <media/soc_camera.h>
-
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/time.h>
 #include <asm/mach/map.h>
-#include <asm/memblock.h>
 
 #include "common.h"
 #include "devices-imx31.h"
@@ -150,22 +146,6 @@ static unsigned int pcm037_pins[] = {
 	MX31_PIN_D3_SPL__D3_SPL,
 	MX31_PIN_D3_CLS__D3_CLS,
 	MX31_PIN_LCS0__GPIO3_23,
-	/* CSI */
-	IOMUX_MODE(MX31_PIN_CSI_D5, IOMUX_CONFIG_GPIO),
-	MX31_PIN_CSI_D6__CSI_D6,
-	MX31_PIN_CSI_D7__CSI_D7,
-	MX31_PIN_CSI_D8__CSI_D8,
-	MX31_PIN_CSI_D9__CSI_D9,
-	MX31_PIN_CSI_D10__CSI_D10,
-	MX31_PIN_CSI_D11__CSI_D11,
-	MX31_PIN_CSI_D12__CSI_D12,
-	MX31_PIN_CSI_D13__CSI_D13,
-	MX31_PIN_CSI_D14__CSI_D14,
-	MX31_PIN_CSI_D15__CSI_D15,
-	MX31_PIN_CSI_HSYNC__CSI_HSYNC,
-	MX31_PIN_CSI_MCLK__CSI_MCLK,
-	MX31_PIN_CSI_PIXCLK__CSI_PIXCLK,
-	MX31_PIN_CSI_VSYNC__CSI_VSYNC,
 	/* GPIO */
 	IOMUX_MODE(MX31_PIN_ATA_DMACK, IOMUX_CONFIG_GPIO),
 	/* OTG */
@@ -289,34 +269,6 @@ static struct at24_platform_data board_eeprom = {
 	.flags = AT24_FLAG_ADDR16,
 };
 
-static int pcm037_camera_power(struct device *dev, int on)
-{
-	/* disable or enable the camera in X7 or X8 PCM970 connector */
-	gpio_set_value(IOMUX_TO_GPIO(MX31_PIN_CSI_D5), !on);
-	return 0;
-}
-
-static struct i2c_board_info pcm037_i2c_camera[] = {
-	{
-		I2C_BOARD_INFO("mt9t031", 0x5d),
-	}, {
-		I2C_BOARD_INFO("mt9v022", 0x48),
-	},
-};
-
-static struct soc_camera_link iclink_mt9v022 = {
-	.bus_id		= 0,		/* Must match with the camera ID */
-	.board_info	= &pcm037_i2c_camera[1],
-	.i2c_adapter_id	= 2,
-};
-
-static struct soc_camera_link iclink_mt9t031 = {
-	.bus_id		= 0,		/* Must match with the camera ID */
-	.power		= pcm037_camera_power,
-	.board_info	= &pcm037_i2c_camera[0],
-	.i2c_adapter_id	= 2,
-};
-
 static struct i2c_board_info pcm037_i2c_devices[] = {
 	{
 		I2C_BOARD_INFO("at24", 0x52), /* E0=0, E1=1, E2=0 */
@@ -326,22 +278,6 @@ static struct i2c_board_info pcm037_i2c_devices[] = {
 	}
 };
 
-static struct platform_device pcm037_mt9t031 = {
-	.name	= "soc-camera-pdrv",
-	.id	= 0,
-	.dev	= {
-		.platform_data = &iclink_mt9t031,
-	},
-};
-
-static struct platform_device pcm037_mt9v022 = {
-	.name	= "soc-camera-pdrv",
-	.id	= 1,
-	.dev	= {
-		.platform_data = &iclink_mt9v022,
-	},
-};
-
 /* Not connected by default */
 #ifdef PCM970_SDHC_RW_SWITCH
 static int pcm970_sdhc1_get_ro(struct device *dev)
@@ -403,42 +339,9 @@ static const struct imxmmc_platform_data sdhc_pdata __initconst = {
 	.exit = pcm970_sdhc1_exit,
 };
 
-struct mx3_camera_pdata camera_pdata __initdata = {
-	.flags		= MX3_CAMERA_DATAWIDTH_8 | MX3_CAMERA_DATAWIDTH_10,
-	.mclk_10khz	= 2000,
-};
-
-static phys_addr_t mx3_camera_base __initdata;
-#define MX3_CAMERA_BUF_SIZE SZ_4M
-
-static int __init pcm037_init_camera(void)
-{
-	int dma, ret = -ENOMEM;
-	struct platform_device *pdev = imx31_alloc_mx3_camera(&camera_pdata);
-
-	if (IS_ERR(pdev))
-		return PTR_ERR(pdev);
-
-	dma = dma_declare_coherent_memory(&pdev->dev,
-					mx3_camera_base, mx3_camera_base,
-					MX3_CAMERA_BUF_SIZE,
-					DMA_MEMORY_MAP | DMA_MEMORY_EXCLUSIVE);
-	if (!(dma & DMA_MEMORY_MAP))
-		goto err;
-
-	ret = platform_device_add(pdev);
-	if (ret)
-err:
-		platform_device_put(pdev);
-
-	return ret;
-}
-
 static struct platform_device *devices[] __initdata = {
 	&pcm037_flash,
 	&pcm037_sram_device,
-	&pcm037_mt9t031,
-	&pcm037_mt9v022,
 };
 
 static const struct fb_videomode fb_modedb[] = {
@@ -651,13 +554,6 @@ static void __init pcm037_timer_init(void)
 	mx31_clocks_init(26000000);
 }
 
-static void __init pcm037_reserve(void)
-{
-	/* reserve 4 MiB for mx3-camera */
-	mx3_camera_base = arm_memblock_steal(MX3_CAMERA_BUF_SIZE,
-			MX3_CAMERA_BUF_SIZE);
-}
-
 static void __init pcm037_init_late(void)
 {
 	int ret;
@@ -677,16 +573,6 @@ static void __init pcm037_init_late(void)
 
 	imx31_add_mxc_mmc(0, &sdhc_pdata);
 
-	/* CSI */
-	/* Camera power: default - off */
-	ret = gpio_request(IOMUX_TO_GPIO(MX31_PIN_CSI_D5), "mt9t031-power");
-	if (!ret)
-		gpio_direction_output(IOMUX_TO_GPIO(MX31_PIN_CSI_D5), 1);
-	else
-		iclink_mt9t031.power = NULL;
-
-	pcm037_init_camera();
-
 	pcm970_sja1000_resources[1].start =
 			gpio_to_irq(IOMUX_TO_GPIO(IOMUX_PIN(48, 105)));
 	pcm970_sja1000_resources[1].end =
@@ -699,7 +585,6 @@ static void __init pcm037_init_late(void)
 MACHINE_START(PCM037, "Phytec Phycore pcm037")
 	/* Maintainer: Pengutronix */
 	.atag_offset = 0x100,
-	.reserve = pcm037_reserve,
 	.map_io = mx31_map_io,
 	.init_early = imx31_init_early,
 	.init_irq = mx31_init_irq,

arch/arm/mach-imx/mx31moboard-marxbot.c

@@ -24,8 +24,6 @@
 
 #include <linux/usb/otg.h>
 
-#include <media/soc_camera.h>
-
 #include "common.h"
 #include "devices-imx31.h"
 #include "ehci.h"
@@ -39,17 +37,6 @@ static unsigned int marxbot_pins[] = {
 	MX31_PIN_PC_READY__SD2_DATA1, MX31_PIN_PC_WAIT_B__SD2_DATA0,
 	MX31_PIN_PC_CD2_B__SD2_CLK, MX31_PIN_PC_CD1_B__SD2_CMD,
 	MX31_PIN_ATA_DIOR__GPIO3_28, MX31_PIN_ATA_DIOW__GPIO3_29,
-	/* CSI */
-	MX31_PIN_CSI_D6__CSI_D6, MX31_PIN_CSI_D7__CSI_D7,
-	MX31_PIN_CSI_D8__CSI_D8, MX31_PIN_CSI_D9__CSI_D9,
-	MX31_PIN_CSI_D10__CSI_D10, MX31_PIN_CSI_D11__CSI_D11,
-	MX31_PIN_CSI_D12__CSI_D12, MX31_PIN_CSI_D13__CSI_D13,
-	MX31_PIN_CSI_D14__CSI_D14, MX31_PIN_CSI_D15__CSI_D15,
-	MX31_PIN_CSI_HSYNC__CSI_HSYNC, MX31_PIN_CSI_MCLK__CSI_MCLK,
-	MX31_PIN_CSI_PIXCLK__CSI_PIXCLK, MX31_PIN_CSI_VSYNC__CSI_VSYNC,
-	MX31_PIN_CSI_D4__GPIO3_4, MX31_PIN_CSI_D5__GPIO3_5,
-	MX31_PIN_GPIO3_0__GPIO3_0, MX31_PIN_GPIO3_1__GPIO3_1,
-	MX31_PIN_TXD2__GPIO1_28,
 	/* dsPIC resets */
 	MX31_PIN_STXD5__GPIO1_21, MX31_PIN_SRXD5__GPIO1_22,
 	/*battery detection */
@@ -143,82 +130,6 @@ static struct spi_board_info marxbot_spi_board_info[] __initdata = {
 	},
 };
 
-#define TURRETCAM_POWER	IOMUX_TO_GPIO(MX31_PIN_GPIO3_1)
-#define BASECAM_POWER	IOMUX_TO_GPIO(MX31_PIN_CSI_D5)
-#define TURRETCAM_RST_B	IOMUX_TO_GPIO(MX31_PIN_GPIO3_0)
-#define BASECAM_RST_B	IOMUX_TO_GPIO(MX31_PIN_CSI_D4)
-#define CAM_CHOICE	IOMUX_TO_GPIO(MX31_PIN_TXD2)
-
-static int marxbot_basecam_power(struct device *dev, int on)
-{
-	gpio_set_value(BASECAM_POWER, !on);
-	return 0;
-}
-
-static int marxbot_basecam_reset(struct device *dev)
-{
-	gpio_set_value(BASECAM_RST_B, 0);
-	udelay(100);
-	gpio_set_value(BASECAM_RST_B, 1);
-	return 0;
-}
-
-static struct i2c_board_info marxbot_i2c_devices[] = {
-	{
-		I2C_BOARD_INFO("mt9t031", 0x5d),
-	},
-};
-
-static struct soc_camera_link base_iclink = {
-	.bus_id		= 0,		/* Must match with the camera ID */
-	.power		= marxbot_basecam_power,
-	.reset		= marxbot_basecam_reset,
-	.board_info	= &marxbot_i2c_devices[0],
-	.i2c_adapter_id	= 0,
-};
-
-static struct platform_device marxbot_camera[] = {
-	{
-		.name	= "soc-camera-pdrv",
-		.id	= 0,
-		.dev	= {
-			.platform_data = &base_iclink,
-		},
-	},
-};
-
-static struct platform_device *marxbot_cameras[] __initdata = {
-	&marxbot_camera[0],
-};
-
-static int __init marxbot_cam_init(void)
-{
-	int ret = gpio_request(CAM_CHOICE, "cam-choice");
-	if (ret)
-		return ret;
-	gpio_direction_output(CAM_CHOICE, 0);
-
-	ret = gpio_request(BASECAM_RST_B, "basecam-reset");
-	if (ret)
-		return ret;
-	gpio_direction_output(BASECAM_RST_B, 1);
-	ret = gpio_request(BASECAM_POWER, "basecam-standby");
-	if (ret)
-		return ret;
-	gpio_direction_output(BASECAM_POWER, 0);
-
-	ret = gpio_request(TURRETCAM_RST_B, "turretcam-reset");
-	if (ret)
-		return ret;
-	gpio_direction_output(TURRETCAM_RST_B, 1);
-	ret = gpio_request(TURRETCAM_POWER, "turretcam-standby");
-	if (ret)
-		return ret;
-	gpio_direction_output(TURRETCAM_POWER, 0);
-
-	return 0;
-}
-
 #define SEL0 IOMUX_TO_GPIO(MX31_PIN_DTR_DCE1)
 #define SEL1 IOMUX_TO_GPIO(MX31_PIN_DSR_DCE1)
 #define SEL2 IOMUX_TO_GPIO(MX31_PIN_RI_DCE1)
@@ -356,9 +267,6 @@ void __init mx31moboard_marxbot_init(void)
 	spi_register_board_info(marxbot_spi_board_info,
 		ARRAY_SIZE(marxbot_spi_board_info));
 
-	marxbot_cam_init();
-	platform_add_devices(marxbot_cameras, ARRAY_SIZE(marxbot_cameras));
-
 	/* battery present pin */
 	gpio_request(IOMUX_TO_GPIO(MX31_PIN_LCS0), "bat-present");
 	gpio_direction_input(IOMUX_TO_GPIO(MX31_PIN_LCS0));

arch/arm/mach-imx/mx31moboard-smartbot.c

@@ -23,8 +23,6 @@
 #include <linux/usb/otg.h>
 #include <linux/usb/ulpi.h>
 
-#include <media/soc_camera.h>
-
 #include "board-mx31moboard.h"
 #include "common.h"
 #include "devices-imx31.h"
@@ -37,16 +35,6 @@ static unsigned int smartbot_pins[] = {
 	/* UART1 */
 	MX31_PIN_CTS2__CTS2, MX31_PIN_RTS2__RTS2,
 	MX31_PIN_TXD2__TXD2, MX31_PIN_RXD2__RXD2,
-	/* CSI */
-	MX31_PIN_CSI_D4__CSI_D4, MX31_PIN_CSI_D5__CSI_D5,
-	MX31_PIN_CSI_D6__CSI_D6, MX31_PIN_CSI_D7__CSI_D7,
-	MX31_PIN_CSI_D8__CSI_D8, MX31_PIN_CSI_D9__CSI_D9,
-	MX31_PIN_CSI_D10__CSI_D10, MX31_PIN_CSI_D11__CSI_D11,
-	MX31_PIN_CSI_D12__CSI_D12, MX31_PIN_CSI_D13__CSI_D13,
-	MX31_PIN_CSI_D14__CSI_D14, MX31_PIN_CSI_D15__CSI_D15,
-	MX31_PIN_CSI_HSYNC__CSI_HSYNC, MX31_PIN_CSI_MCLK__CSI_MCLK,
-	MX31_PIN_CSI_PIXCLK__CSI_PIXCLK, MX31_PIN_CSI_VSYNC__CSI_VSYNC,
-	MX31_PIN_GPIO3_0__GPIO3_0, MX31_PIN_GPIO3_1__GPIO3_1,
 	/* ENABLES */
 	MX31_PIN_DTR_DCE1__GPIO2_8, MX31_PIN_DSR_DCE1__GPIO2_9,
 	MX31_PIN_RI_DCE1__GPIO2_10, MX31_PIN_DCD_DCE1__GPIO2_11,
@@ -56,65 +44,6 @@ static const struct imxuart_platform_data uart_pdata __initconst = {
 	.flags = IMXUART_HAVE_RTSCTS,
 };
 
-#define CAM_POWER	IOMUX_TO_GPIO(MX31_PIN_GPIO3_1)
-#define CAM_RST_B	IOMUX_TO_GPIO(MX31_PIN_GPIO3_0)
-
-static int smartbot_cam_power(struct device *dev, int on)
-{
-	gpio_set_value(CAM_POWER, !on);
-	return 0;
-}
-
-static int smartbot_cam_reset(struct device *dev)
-{
-	gpio_set_value(CAM_RST_B, 0);
-	udelay(100);
-	gpio_set_value(CAM_RST_B, 1);
-	return 0;
-}
-
-static struct i2c_board_info smartbot_i2c_devices[] = {
-	{
-		I2C_BOARD_INFO("mt9t031", 0x5d),
-	},
-};
-
-static struct soc_camera_link base_iclink = {
-	.bus_id		= 0,		/* Must match with the camera ID */
-	.power		= smartbot_cam_power,
-	.reset		= smartbot_cam_reset,
-	.board_info	= &smartbot_i2c_devices[0],
-	.i2c_adapter_id	= 0,
-};
-
-static struct platform_device smartbot_camera[] = {
-	{
-		.name	= "soc-camera-pdrv",
-		.id	= 0,
-		.dev	= {
-			.platform_data = &base_iclink,
-		},
-	},
-};
-
-static struct platform_device *smartbot_cameras[] __initdata = {
-	&smartbot_camera[0],
-};
-
-static int __init smartbot_cam_init(void)
-{
-	int ret = gpio_request(CAM_RST_B, "cam-reset");
-	if (ret)
-		return ret;
-	gpio_direction_output(CAM_RST_B, 1);
-	ret = gpio_request(CAM_POWER, "cam-standby");
-	if (ret)
-		return ret;
-	gpio_direction_output(CAM_POWER, 0);
-
-	return 0;
-}
-
 static const struct fsl_usb2_platform_data usb_pdata __initconst = {
 	.operating_mode	= FSL_USB2_DR_DEVICE,
 	.phy_mode	= FSL_USB2_PHY_ULPI,
@@ -201,7 +130,4 @@ void __init mx31moboard_smartbot_init(int board)
 	}
 
 	smartbot_resets_init();
-
-	smartbot_cam_init();
-	platform_add_devices(smartbot_cameras, ARRAY_SIZE(smartbot_cameras));
 }

arch/arm/mach-mv78xx0/pcie.c

@@ -29,7 +29,7 @@ struct pcie_port {
 	u8			root_bus_nr;
 	void __iomem		*base;
 	spinlock_t		conf_lock;
-	char			mem_space_name[16];
+	char			mem_space_name[20];
 	struct resource		res;
 };
 

arch/arm/mach-mvebu/platsmp.c

@@ -184,3 +184,78 @@ const struct smp_operations armada_xp_smp_ops __initconst = {
 
 CPU_METHOD_OF_DECLARE(armada_xp_smp, "marvell,armada-xp-smp",
 		      &armada_xp_smp_ops);
+
+#define MV98DX3236_CPU_RESUME_CTRL_REG 0x08
+#define MV98DX3236_CPU_RESUME_ADDR_REG 0x04
+
+static const struct of_device_id of_mv98dx3236_resume_table[] = {
+	{
+		.compatible = "marvell,98dx3336-resume-ctrl",
+	},
+	{ /* end of list */ },
+};
+
+static int mv98dx3236_resume_set_cpu_boot_addr(int hw_cpu, void *boot_addr)
+{
+	struct device_node *np;
+	void __iomem *base;
+	WARN_ON(hw_cpu != 1);
+
+	np = of_find_matching_node(NULL, of_mv98dx3236_resume_table);
+	if (!np)
+		return -ENODEV;
+
+	base = of_io_request_and_map(np, 0, of_node_full_name(np));
+	of_node_put(np);
+	if (IS_ERR(base))
+		return PTR_ERR(base);
+
+	writel(0, base + MV98DX3236_CPU_RESUME_CTRL_REG);
+	writel(virt_to_phys(boot_addr), base + MV98DX3236_CPU_RESUME_ADDR_REG);
+
+	iounmap(base);
+
+	return 0;
+}
+
+static int mv98dx3236_boot_secondary(unsigned int cpu, struct task_struct *idle)
+{
+	int ret, hw_cpu;
+
+	hw_cpu = cpu_logical_map(cpu);
+	set_secondary_cpu_clock(hw_cpu);
+	mv98dx3236_resume_set_cpu_boot_addr(hw_cpu,
+					    armada_xp_secondary_startup);
+
+	/*
+	 * This is needed to wake up CPUs in the offline state after
+	 * using CPU hotplug.
+	 */
+	arch_send_wakeup_ipi_mask(cpumask_of(cpu));
+
+	/*
+	 * This is needed to take secondary CPUs out of reset on the
+	 * initial boot.
+	 */
+	ret = mvebu_cpu_reset_deassert(hw_cpu);
+	if (ret) {
+		pr_warn("unable to boot CPU: %d\n", ret);
+		return ret;
+	}
+
+	return 0;
+}
+
+static const struct smp_operations mv98dx3236_smp_ops __initconst = {
+	.smp_init_cpus		= armada_xp_smp_init_cpus,
+	.smp_prepare_cpus	= armada_xp_smp_prepare_cpus,
+	.smp_boot_secondary	= mv98dx3236_boot_secondary,
+	.smp_secondary_init     = armada_xp_secondary_init,
+#ifdef CONFIG_HOTPLUG_CPU
+	.cpu_die		= armada_xp_cpu_die,
+	.cpu_kill               = armada_xp_cpu_kill,
+#endif
+};
+
+CPU_METHOD_OF_DECLARE(mv98dx3236_smp, "marvell,98dx3236-smp",
+		      &mv98dx3236_smp_ops);

arch/arm/mach-omap1/clock.c

@@ -720,26 +720,6 @@ EXPORT_SYMBOL(clk_get_parent);
  * OMAP specific clock functions shared between omap1 and omap2
  */
 
-int __initdata mpurate;
-
-/*
- * By default we use the rate set by the bootloader.
- * You can override this with mpurate= cmdline option.
- */
-static int __init omap_clk_setup(char *str)
-{
-	get_option(&str, &mpurate);
-
-	if (!mpurate)
-		return 1;
-
-	if (mpurate < 1000)
-		mpurate *= 1000000;
-
-	return 1;
-}
-__setup("mpurate=", omap_clk_setup);
-
 /* Used for clocks that always have same value as the parent clock */
 unsigned long followparent_recalc(struct clk *clk)
 {

arch/arm/mach-omap1/clock.h

@@ -173,8 +173,6 @@ struct clk_functions {
 	void		(*clk_disable_unused)(struct clk *clk);
 };
 
-extern int mpurate;
-
 extern int clk_init(struct clk_functions *custom_clocks);
 extern void clk_preinit(struct clk *clk);
 extern int clk_register(struct clk *clk);

arch/arm/mach-omap1/include/mach/usb.h

@@ -10,8 +10,6 @@
 
 #include <linux/platform_data/usb-omap1.h>
 
-void omap_otg_init(struct omap_usb_config *config);
-
 #if IS_ENABLED(CONFIG_USB)
 void omap1_usb_init(struct omap_usb_config *pdata);
 #else

arch/arm/mach-omap1/usb.c

@@ -1,5 +1,5 @@
 /*
- * Platform level USB initialization for FS USB OTG controller on omap1 and 24xx
+ * Platform level USB initialization for FS USB OTG controller on omap1
  *
  * Copyright (C) 2004 Texas Instruments, Inc.
  *
@@ -58,11 +58,12 @@
 
 #ifdef	CONFIG_ARCH_OMAP_OTG
 
-void __init
+static void __init
 omap_otg_init(struct omap_usb_config *config)
 {
 	u32		syscon;
 	int		alt_pingroup = 0;
+	u16		w;
 
 	/* NOTE:  no bus or clock setup (yet?) */
 
@@ -87,39 +88,35 @@ omap_otg_init(struct omap_usb_config *config)
 	if (config->otg)
 		syscon |= OTG_EN;
 #endif
-	if (cpu_class_is_omap1())
-		pr_debug("USB_TRANSCEIVER_CTRL = %03x\n",
-			 omap_readl(USB_TRANSCEIVER_CTRL));
+	pr_debug("USB_TRANSCEIVER_CTRL = %03x\n",
+		 omap_readl(USB_TRANSCEIVER_CTRL));
 	pr_debug("OTG_SYSCON_2 = %08x\n", omap_readl(OTG_SYSCON_2));
 	omap_writel(syscon, OTG_SYSCON_2);
 
 	printk("USB: hmc %d", config->hmc_mode);
 	if (!alt_pingroup)
-		printk(", usb2 alt %d wires", config->pins[2]);
+		pr_cont(", usb2 alt %d wires", config->pins[2]);
 	else if (config->pins[0])
-		printk(", usb0 %d wires%s", config->pins[0],
+		pr_cont(", usb0 %d wires%s", config->pins[0],
 			is_usb0_device(config) ? " (dev)" : "");
 	if (config->pins[1])
-		printk(", usb1 %d wires", config->pins[1]);
+		pr_cont(", usb1 %d wires", config->pins[1]);
 	if (!alt_pingroup && config->pins[2])
-		printk(", usb2 %d wires", config->pins[2]);
+		pr_cont(", usb2 %d wires", config->pins[2]);
 	if (config->otg)
-		printk(", Mini-AB on usb%d", config->otg - 1);
-	printk("\n");
+		pr_cont(", Mini-AB on usb%d", config->otg - 1);
+	pr_cont("\n");
 
-	if (cpu_class_is_omap1()) {
-		u16 w;
+	/* leave USB clocks/controllers off until needed */
+	w = omap_readw(ULPD_SOFT_REQ);
+	w &= ~SOFT_USB_CLK_REQ;
+	omap_writew(w, ULPD_SOFT_REQ);
 
-		/* leave USB clocks/controllers off until needed */
-		w = omap_readw(ULPD_SOFT_REQ);
-		w &= ~SOFT_USB_CLK_REQ;
-		omap_writew(w, ULPD_SOFT_REQ);
+	w = omap_readw(ULPD_CLOCK_CTRL);
+	w &= ~USB_MCLK_EN;
+	w |= DIS_USB_PVCI_CLK;
+	omap_writew(w, ULPD_CLOCK_CTRL);
 
-		w = omap_readw(ULPD_CLOCK_CTRL);
-		w &= ~USB_MCLK_EN;
-		w |= DIS_USB_PVCI_CLK;
-		omap_writew(w, ULPD_CLOCK_CTRL);
-	}
 	syscon = omap_readl(OTG_SYSCON_1);
 	syscon |= HST_IDLE_EN|DEV_IDLE_EN|OTG_IDLE_EN;
 
@@ -166,7 +163,7 @@ omap_otg_init(struct omap_usb_config *config)
 }
 
 #else
-void omap_otg_init(struct omap_usb_config *config) {}
+static void omap_otg_init(struct omap_usb_config *config) {}
 #endif
 
 #if IS_ENABLED(CONFIG_USB_OMAP)
@@ -573,13 +570,13 @@ static void __init omap_1510_usb_init(struct omap_usb_config *config)
 
 	printk("USB: hmc %d", config->hmc_mode);
 	if (config->pins[0])
-		printk(", usb0 %d wires%s", config->pins[0],
+		pr_cont(", usb0 %d wires%s", config->pins[0],
 			is_usb0_device(config) ? " (dev)" : "");
 	if (config->pins[1])
-		printk(", usb1 %d wires", config->pins[1]);
+		pr_cont(", usb1 %d wires", config->pins[1]);
 	if (config->pins[2])
-		printk(", usb2 %d wires", config->pins[2]);
-	printk("\n");
+		pr_cont(", usb2 %d wires", config->pins[2]);
+	pr_cont("\n");
 
 	/* use DPLL for 48 MHz function clock */
 	pr_debug("APLL %04x DPLL %04x REQ %04x\n", omap_readw(ULPD_APLL_CTRL),

arch/arm/mach-omap2/clock.c

@@ -78,8 +78,6 @@ int __init omap2_clk_setup_ll_ops(void)
  * OMAP2+ specific clock functions
  */
 
-/* Private functions */
-
 /* Public functions */
 
 /**
@@ -112,65 +110,6 @@ void omap2_init_clk_clkdm(struct clk_hw *hw)
 	}
 }
 
-static int __initdata mpurate;
-
-/*
- * By default we use the rate set by the bootloader.
- * You can override this with mpurate= cmdline option.
- */
-static int __init omap_clk_setup(char *str)
-{
-	get_option(&str, &mpurate);
-
-	if (!mpurate)
-		return 1;
-
-	if (mpurate < 1000)
-		mpurate *= 1000000;
-
-	return 1;
-}
-__setup("mpurate=", omap_clk_setup);
-
-/**
- * omap2_clk_print_new_rates - print summary of current clock tree rates
- * @hfclkin_ck_name: clk name for the off-chip HF oscillator
- * @core_ck_name: clk name for the on-chip CORE_CLK
- * @mpu_ck_name: clk name for the ARM MPU clock
- *
- * Prints a short message to the console with the HFCLKIN oscillator
- * rate, the rate of the CORE clock, and the rate of the ARM MPU clock.
- * Called by the boot-time MPU rate switching code.   XXX This is intended
- * to be handled by the OPP layer code in the near future and should be
- * removed from the clock code.  No return value.
- */
-void __init omap2_clk_print_new_rates(const char *hfclkin_ck_name,
-				      const char *core_ck_name,
-				      const char *mpu_ck_name)
-{
-	struct clk *hfclkin_ck, *core_ck, *mpu_ck;
-	unsigned long hfclkin_rate;
-
-	mpu_ck = clk_get(NULL, mpu_ck_name);
-	if (WARN(IS_ERR(mpu_ck), "clock: failed to get %s.\n", mpu_ck_name))
-		return;
-
-	core_ck = clk_get(NULL, core_ck_name);
-	if (WARN(IS_ERR(core_ck), "clock: failed to get %s.\n", core_ck_name))
-		return;
-
-	hfclkin_ck = clk_get(NULL, hfclkin_ck_name);
-	if (WARN(IS_ERR(hfclkin_ck), "Failed to get %s.\n", hfclkin_ck_name))
-		return;
-
-	hfclkin_rate = clk_get_rate(hfclkin_ck);
-
-	pr_info("Switched to new clocking rate (Crystal/Core/MPU): %ld.%01ld/%ld/%ld MHz\n",
-		(hfclkin_rate / 1000000), ((hfclkin_rate / 100000) % 10),
-		(clk_get_rate(core_ck) / 1000000),
-		(clk_get_rate(mpu_ck) / 1000000));
-}
-
 /**
  * ti_clk_init_features - init clock features struct for the SoC
  *

arch/arm/mach-omap2/clock.h

@@ -64,10 +64,6 @@
 #define OMAP4XXX_EN_DPLL_FRBYPASS		0x6
 #define OMAP4XXX_EN_DPLL_LOCKED			0x7
 
-void omap2_clk_print_new_rates(const char *hfclkin_ck_name,
-			       const char *core_ck_name,
-			       const char *mpu_ck_name);
-
 extern u16 cpu_mask;
 
 extern const struct clkops clkops_omap2_dflt_wait;

arch/arm/mach-omap2/display.c

@@ -46,8 +46,6 @@
 #define DISPC_CONTROL3		0x0848
 #define DISPC_IRQSTATUS		0x0018
 
-#define DSS_SYSCONFIG		0x10
-#define DSS_SYSSTATUS		0x14
 #define DSS_CONTROL		0x40
 #define DSS_SDI_CONTROL		0x44
 #define DSS_PLL_CONTROL		0x48
@@ -76,36 +74,6 @@ static struct platform_device omap_display_device = {
 	},
 };
 
-struct omap_dss_hwmod_data {
-	const char *oh_name;
-	const char *dev_name;
-	const int id;
-};
-
-static const struct omap_dss_hwmod_data omap2_dss_hwmod_data[] __initconst = {
-	{ "dss_core", "omapdss_dss", -1 },
-	{ "dss_dispc", "omapdss_dispc", -1 },
-	{ "dss_rfbi", "omapdss_rfbi", -1 },
-	{ "dss_venc", "omapdss_venc", -1 },
-};
-
-static const struct omap_dss_hwmod_data omap3_dss_hwmod_data[] __initconst = {
-	{ "dss_core", "omapdss_dss", -1 },
-	{ "dss_dispc", "omapdss_dispc", -1 },
-	{ "dss_rfbi", "omapdss_rfbi", -1 },
-	{ "dss_venc", "omapdss_venc", -1 },
-	{ "dss_dsi1", "omapdss_dsi", 0 },
-};
-
-static const struct omap_dss_hwmod_data omap4_dss_hwmod_data[] __initconst = {
-	{ "dss_core", "omapdss_dss", -1 },
-	{ "dss_dispc", "omapdss_dispc", -1 },
-	{ "dss_rfbi", "omapdss_rfbi", -1 },
-	{ "dss_dsi1", "omapdss_dsi", 0 },
-	{ "dss_dsi2", "omapdss_dsi", 1 },
-	{ "dss_hdmi", "omapdss_hdmi", -1 },
-};
-
 #define OMAP4_DSIPHY_SYSCON_OFFSET		0x78
 
 static struct regmap *omap4_dsi_mux_syscon;
@@ -162,104 +130,6 @@ static int omap_dss_set_min_bus_tput(struct device *dev, unsigned long tput)
 	return omap_pm_set_min_bus_tput(dev, OCP_INITIATOR_AGENT, tput);
 }
 
-static struct platform_device *create_dss_pdev(const char *pdev_name,
-		int pdev_id, const char *oh_name, void *pdata, int pdata_len,
-		struct platform_device *parent)
-{
-	struct platform_device *pdev;
-	struct omap_device *od;
-	struct omap_hwmod *ohs[1];
-	struct omap_hwmod *oh;
-	int r;
-
-	oh = omap_hwmod_lookup(oh_name);
-	if (!oh) {
-		pr_err("Could not look up %s\n", oh_name);
-		r = -ENODEV;
-		goto err;
-	}
-
-	pdev = platform_device_alloc(pdev_name, pdev_id);
-	if (!pdev) {
-		pr_err("Could not create pdev for %s\n", pdev_name);
-		r = -ENOMEM;
-		goto err;
-	}
-
-	if (parent != NULL)
-		pdev->dev.parent = &parent->dev;
-
-	if (pdev->id != -1)
-		dev_set_name(&pdev->dev, "%s.%d", pdev->name, pdev->id);
-	else
-		dev_set_name(&pdev->dev, "%s", pdev->name);
-
-	ohs[0] = oh;
-	od = omap_device_alloc(pdev, ohs, 1);
-	if (IS_ERR(od)) {
-		pr_err("Could not alloc omap_device for %s\n", pdev_name);
-		r = -ENOMEM;
-		goto err;
-	}
-
-	r = platform_device_add_data(pdev, pdata, pdata_len);
-	if (r) {
-		pr_err("Could not set pdata for %s\n", pdev_name);
-		goto err;
-	}
-
-	r = omap_device_register(pdev);
-	if (r) {
-		pr_err("Could not register omap_device for %s\n", pdev_name);
-		goto err;
-	}
-
-	return pdev;
-
-err:
-	return ERR_PTR(r);
-}
-
-static struct platform_device *create_simple_dss_pdev(const char *pdev_name,
-		int pdev_id, void *pdata, int pdata_len,
-		struct platform_device *parent)
-{
-	struct platform_device *pdev;
-	int r;
-
-	pdev = platform_device_alloc(pdev_name, pdev_id);
-	if (!pdev) {
-		pr_err("Could not create pdev for %s\n", pdev_name);
-		r = -ENOMEM;
-		goto err;
-	}
-
-	if (parent != NULL)
-		pdev->dev.parent = &parent->dev;
-
-	if (pdev->id != -1)
-		dev_set_name(&pdev->dev, "%s.%d", pdev->name, pdev->id);
-	else
-		dev_set_name(&pdev->dev, "%s", pdev->name);
-
-	r = platform_device_add_data(pdev, pdata, pdata_len);
-	if (r) {
-		pr_err("Could not set pdata for %s\n", pdev_name);
-		goto err;
-	}
-
-	r = platform_device_add(pdev);
-	if (r) {
-		pr_err("Could not register platform_device for %s\n", pdev_name);
-		goto err;
-	}
-
-	return pdev;
-
-err:
-	return ERR_PTR(r);
-}
-
 static enum omapdss_version __init omap_display_get_version(void)
 {
 	if (cpu_is_omap24xx())
@@ -293,132 +163,6 @@ static enum omapdss_version __init omap_display_get_version(void)
 		return OMAPDSS_VER_UNKNOWN;
 }
 
-int __init omap_display_init(struct omap_dss_board_info *board_data)
-{
-	int r = 0;
-	struct platform_device *pdev;
-	int i, oh_count;
-	const struct omap_dss_hwmod_data *curr_dss_hwmod;
-	struct platform_device *dss_pdev;
-	enum omapdss_version ver;
-
-	/* create omapdss device */
-
-	ver = omap_display_get_version();
-
-	if (ver == OMAPDSS_VER_UNKNOWN) {
-		pr_err("DSS not supported on this SoC\n");
-		return -ENODEV;
-	}
-
-	board_data->version = ver;
-	board_data->dsi_enable_pads = omap_dsi_enable_pads;
-	board_data->dsi_disable_pads = omap_dsi_disable_pads;
-	board_data->set_min_bus_tput = omap_dss_set_min_bus_tput;
-
-	omap_display_device.dev.platform_data = board_data;
-
-	r = platform_device_register(&omap_display_device);
-	if (r < 0) {
-		pr_err("Unable to register omapdss device\n");
-		return r;
-	}
-
-	/* create devices for dss hwmods */
-
-	if (cpu_is_omap24xx()) {
-		curr_dss_hwmod = omap2_dss_hwmod_data;
-		oh_count = ARRAY_SIZE(omap2_dss_hwmod_data);
-	} else if (cpu_is_omap34xx()) {
-		curr_dss_hwmod = omap3_dss_hwmod_data;
-		oh_count = ARRAY_SIZE(omap3_dss_hwmod_data);
-	} else {
-		curr_dss_hwmod = omap4_dss_hwmod_data;
-		oh_count = ARRAY_SIZE(omap4_dss_hwmod_data);
-	}
-
-	/*
-	 * First create the pdev for dss_core, which is used as a parent device
-	 * by the other dss pdevs. Note: dss_core has to be the first item in
-	 * the hwmod list.
-	 */
-	dss_pdev = create_dss_pdev(curr_dss_hwmod[0].dev_name,
-			curr_dss_hwmod[0].id,
-			curr_dss_hwmod[0].oh_name,
-			board_data, sizeof(*board_data),
-			NULL);
-
-	if (IS_ERR(dss_pdev)) {
-		pr_err("Could not build omap_device for %s\n",
-				curr_dss_hwmod[0].oh_name);
-
-		return PTR_ERR(dss_pdev);
-	}
-
-	for (i = 1; i < oh_count; i++) {
-		pdev = create_dss_pdev(curr_dss_hwmod[i].dev_name,
-				curr_dss_hwmod[i].id,
-				curr_dss_hwmod[i].oh_name,
-				board_data, sizeof(*board_data),
-				dss_pdev);
-
-		if (IS_ERR(pdev)) {
-			pr_err("Could not build omap_device for %s\n",
-					curr_dss_hwmod[i].oh_name);
-
-			return PTR_ERR(pdev);
-		}
-	}
-
-	/* Create devices for DPI and SDI */
-
-	pdev = create_simple_dss_pdev("omapdss_dpi", 0,
-			board_data, sizeof(*board_data), dss_pdev);
-	if (IS_ERR(pdev)) {
-		pr_err("Could not build platform_device for omapdss_dpi\n");
-		return PTR_ERR(pdev);
-	}
-
-	if (cpu_is_omap34xx()) {
-		pdev = create_simple_dss_pdev("omapdss_sdi", 0,
-				board_data, sizeof(*board_data), dss_pdev);
-		if (IS_ERR(pdev)) {
-			pr_err("Could not build platform_device for omapdss_sdi\n");
-			return PTR_ERR(pdev);
-		}
-	}
-
-	/* create DRM device */
-	r = omap_init_drm();
-	if (r < 0) {
-		pr_err("Unable to register omapdrm device\n");
-		return r;
-	}
-
-	/* create vrfb device */
-	r = omap_init_vrfb();
-	if (r < 0) {
-		pr_err("Unable to register omapvrfb device\n");
-		return r;
-	}
-
-	/* create FB device */
-	r = omap_init_fb();
-	if (r < 0) {
-		pr_err("Unable to register omapfb device\n");
-		return r;
-	}
-
-	/* create V4L2 display device */
-	r = omap_init_vout();
-	if (r < 0) {
-		pr_err("Unable to register omap_vout device\n");
-		return r;
-	}
-
-	return 0;
-}
-
 static void dispc_disable_outputs(void)
 {
 	u32 v, irq_mask = 0;
@@ -573,7 +317,7 @@ static const char * const omapdss_compat_names[] __initconst = {
 	"ti,dra7-dss",
 };
 
-struct device_node * __init omapdss_find_dss_of_node(void)
+static struct device_node * __init omapdss_find_dss_of_node(void)
 {
 	struct device_node *node;
 	int i;

arch/arm/mach-omap2/display.h

@@ -31,11 +31,4 @@ int omap_init_vrfb(void);
 int omap_init_fb(void);
 int omap_init_vout(void);
 
-struct device_node * __init omapdss_find_dss_of_node(void);
-
-struct omap_dss_board_info;
-
-/* Init with the board info */
-int omap_display_init(struct omap_dss_board_info *board_data);
-
 #endif

arch/arm/mach-omap2/omap_hwmod.c

@@ -3248,6 +3248,36 @@ int __init omap_hwmod_setup_one(const char *oh_name)
 	return 0;
 }
 
+/**
+ * omap_hwmod_setup_earlycon_flags - set up flags for early console
+ *
+ * Enable DEBUG_OMAPUART_FLAGS for uart hwmod that is being used as
+ * early concole so that hwmod core doesn't reset and keep it in idle
+ * that specific uart.
+ */
+#ifdef CONFIG_SERIAL_EARLYCON
+static void __init omap_hwmod_setup_earlycon_flags(void)
+{
+	struct device_node *np;
+	struct omap_hwmod *oh;
+	const char *uart;
+
+	np = of_find_node_by_path("/chosen");
+	if (np) {
+		uart = of_get_property(np, "stdout-path", NULL);
+		if (uart) {
+			np = of_find_node_by_path(uart);
+			if (np) {
+				uart = of_get_property(np, "ti,hwmods", NULL);
+				oh = omap_hwmod_lookup(uart);
+				if (oh)
+					oh->flags |= DEBUG_OMAPUART_FLAGS;
+			}
+		}
+	}
+}
+#endif
+
 /**
  * omap_hwmod_setup_all - set up all registered IP blocks
  *
@@ -3261,6 +3291,9 @@ static int __init omap_hwmod_setup_all(void)
 	_ensure_mpu_hwmod_is_setup(NULL);
 
 	omap_hwmod_for_each(_init, NULL);
+#ifdef CONFIG_SERIAL_EARLYCON
+	omap_hwmod_setup_earlycon_flags();
+#endif
 	omap_hwmod_for_each(_setup, NULL);
 
 	return 0;

arch/arm/mach-pxa/ezx.c

@@ -696,32 +696,7 @@ static struct pxa27x_keypad_platform_data e2_keypad_platform_data = {
 };
 #endif /* CONFIG_MACH_EZX_E2 */
 
-#ifdef CONFIG_MACH_EZX_A780
-/* gpio_keys */
-static struct gpio_keys_button a780_buttons[] = {
-	[0] = {
-		.code       = SW_LID,
-		.gpio       = GPIO12_A780_FLIP_LID,
-		.active_low = 0,
-		.desc       = "A780 flip lid",
-		.type       = EV_SW,
-		.wakeup     = 1,
-	},
-};
-
-static struct gpio_keys_platform_data a780_gpio_keys_platform_data = {
-	.buttons  = a780_buttons,
-	.nbuttons = ARRAY_SIZE(a780_buttons),
-};
-
-static struct platform_device a780_gpio_keys = {
-	.name = "gpio-keys",
-	.id   = -1,
-	.dev  = {
-		.platform_data = &a780_gpio_keys_platform_data,
-	},
-};
-
+#if defined(CONFIG_MACH_EZX_A780) || defined(CONFIG_MACH_EZX_A910)
 /* camera */
 static struct regulator_consumer_supply camera_dummy_supplies[] = {
 	REGULATOR_SUPPLY("vdd", "0-005d"),
@@ -750,6 +725,35 @@ static struct platform_device camera_supply_dummy_device = {
 		.platform_data = &camera_dummy_config,
 	},
 };
+#endif
+
+#ifdef CONFIG_MACH_EZX_A780
+/* gpio_keys */
+static struct gpio_keys_button a780_buttons[] = {
+	[0] = {
+		.code       = SW_LID,
+		.gpio       = GPIO12_A780_FLIP_LID,
+		.active_low = 0,
+		.desc       = "A780 flip lid",
+		.type       = EV_SW,
+		.wakeup     = 1,
+	},
+};
+
+static struct gpio_keys_platform_data a780_gpio_keys_platform_data = {
+	.buttons  = a780_buttons,
+	.nbuttons = ARRAY_SIZE(a780_buttons),
+};
+
+static struct platform_device a780_gpio_keys = {
+	.name = "gpio-keys",
+	.id   = -1,
+	.dev  = {
+		.platform_data = &a780_gpio_keys_platform_data,
+	},
+};
+
+/* camera */
 static int a780_camera_reset(struct device *dev)
 {
 	gpio_set_value(GPIO19_GEN1_CAM_RST, 0);

arch/arm/mach-pxa/idp.c

@@ -19,6 +19,7 @@
 #include <linux/init.h>
 #include <linux/interrupt.h>
 #include <linux/irq.h>
+#include <linux/leds.h>
 #include <linux/platform_device.h>
 #include <linux/fb.h>
 

arch/arm/mach-s3c24xx/bast-irq.c

@@ -44,7 +44,7 @@
 /* table of ISA irq nos to the relevant mask... zero means
  * the irq is not implemented
 */
-static unsigned char bast_pc104_irqmasks[] = {
+static const unsigned char bast_pc104_irqmasks[] = {
 	0,   /* 0 */
 	0,   /* 1 */
 	0,   /* 2 */
@@ -63,7 +63,7 @@ static unsigned char bast_pc104_irqmasks[] = {
 	0,   /* 15 */
 };
 
-static unsigned char bast_pc104_irqs[] = { 3, 5, 7, 10 };
+static const unsigned char bast_pc104_irqs[] = { 3, 5, 7, 10 };
 
 static void
 bast_pc104_mask(struct irq_data *data)

arch/arm/mach-s3c24xx/iotiming-s3c2410.c

@@ -249,7 +249,7 @@ static int s3c2410_calc_bank(struct s3c_cpufreq_config *cfg,
 	return 0;
 }
 
-static unsigned int tacc_tab[] = {
+static const unsigned int tacc_tab[] = {
 	[0]	= 1,
 	[1]	= 2,
 	[2]	= 3,

arch/arm/mach-s3c24xx/pm-s3c2412.c

@@ -53,7 +53,7 @@ static int s3c2412_cpu_suspend(unsigned long arg)
 }
 
 /* mapping of interrupts to parts of the wakeup mask */
-static struct samsung_wakeup_mask wake_irqs[] = {
+static const struct samsung_wakeup_mask wake_irqs[] = {
 	{ .irq = IRQ_RTC,	.bit = S3C2412_PWRCFG_RTC_MASKIRQ, },
 };
 

arch/arm/mach-s3c64xx/common.c

@@ -56,7 +56,8 @@
 #include "watchdog-reset.h"
 
 /* External clock frequency */
-static unsigned long xtal_f = 12000000, xusbxti_f = 48000000;
+static unsigned long xtal_f __ro_after_init = 12000000;
+static unsigned long xusbxti_f __ro_after_init = 48000000;
 
 void __init s3c64xx_set_xtal_freq(unsigned long freq)
 {

arch/arm/mach-s3c64xx/dev-audio.c

@@ -58,9 +58,6 @@ static struct resource s3c64xx_iis0_resource[] = {
 
 static struct s3c_audio_pdata i2s0_pdata = {
 	.cfg_gpio = s3c64xx_i2s_cfg_gpio,
-	.dma_filter = pl08x_filter_id,
-	.dma_playback = DMACH_I2S0_OUT,
-	.dma_capture = DMACH_I2S0_IN,
 };
 
 struct platform_device s3c64xx_device_iis0 = {
@@ -80,9 +77,6 @@ static struct resource s3c64xx_iis1_resource[] = {
 
 static struct s3c_audio_pdata i2s1_pdata = {
 	.cfg_gpio = s3c64xx_i2s_cfg_gpio,
-	.dma_filter = pl08x_filter_id,
-	.dma_playback = DMACH_I2S1_OUT,
-	.dma_capture = DMACH_I2S1_IN,
 };
 
 struct platform_device s3c64xx_device_iis1 = {
@@ -102,9 +96,6 @@ static struct resource s3c64xx_iisv4_resource[] = {
 
 static struct s3c_audio_pdata i2sv4_pdata = {
 	.cfg_gpio = s3c64xx_i2s_cfg_gpio,
-	.dma_filter = pl08x_filter_id,
-	.dma_playback = DMACH_HSI_I2SV40_TX,
-	.dma_capture = DMACH_HSI_I2SV40_RX,
 	.type = {
 		.quirks = QUIRK_PRI_6CHAN,
 	},
@@ -151,9 +142,6 @@ static struct resource s3c64xx_pcm0_resource[] = {
 
 static struct s3c_audio_pdata s3c_pcm0_pdata = {
 	.cfg_gpio = s3c64xx_pcm_cfg_gpio,
-	.dma_filter = pl08x_filter_id,
-	.dma_capture = DMACH_PCM0_RX,
-	.dma_playback = DMACH_PCM0_TX,
 };
 
 struct platform_device s3c64xx_device_pcm0 = {
@@ -173,9 +161,6 @@ static struct resource s3c64xx_pcm1_resource[] = {
 
 static struct s3c_audio_pdata s3c_pcm1_pdata = {
 	.cfg_gpio = s3c64xx_pcm_cfg_gpio,
-	.dma_filter = pl08x_filter_id,
-	.dma_playback = DMACH_PCM1_TX,
-	.dma_capture = DMACH_PCM1_RX,
 };
 
 struct platform_device s3c64xx_device_pcm1 = {
@@ -207,10 +192,6 @@ static struct resource s3c64xx_ac97_resource[] = {
 };
 
 static struct s3c_audio_pdata s3c_ac97_pdata = {
-	.dma_playback = DMACH_AC97_PCMOUT,
-	.dma_filter = pl08x_filter_id,
-	.dma_capture = DMACH_AC97_PCMIN,
-	.dma_capture_mic = DMACH_AC97_MICIN,
 };
 
 static u64 s3c64xx_ac97_dmamask = DMA_BIT_MASK(32);

arch/arm/mach-s3c64xx/pm.c

@@ -285,7 +285,7 @@ static int s3c64xx_cpu_suspend(unsigned long arg)
 }
 
 /* mapping of interrupts to parts of the wakeup mask */
-static struct samsung_wakeup_mask wake_irqs[] = {
+static const struct samsung_wakeup_mask wake_irqs[] = {
 	{ .irq = IRQ_RTC_ALARM,	.bit = S3C64XX_PWRCFG_RTC_ALARM_DISABLE, },
 	{ .irq = IRQ_RTC_TIC,	.bit = S3C64XX_PWRCFG_RTC_TICK_DISABLE, },
 	{ .irq = IRQ_PENDN,	.bit = S3C64XX_PWRCFG_TS_DISABLE, },

arch/arm/mach-shmobile/platsmp-apmu.c

@@ -31,9 +31,21 @@ static struct {
 	int bit;
 } apmu_cpus[NR_CPUS];
 
-#define WUPCR_OFFS 0x10
-#define PSTR_OFFS 0x40
-#define CPUNCR_OFFS(n) (0x100 + (0x10 * (n)))
+#define WUPCR_OFFS	 0x10		/* Wake Up Control Register */
+#define PSTR_OFFS	 0x40		/* Power Status Register */
+#define CPUNCR_OFFS(n)	(0x100 + (0x10 * (n)))
+					/* CPUn Power Status Control Register */
+#define DBGRCR_OFFS	0x180		/* Debug Resource Reset Control Reg. */
+
+/* Power Status Register */
+#define CPUNST(r, n)	(((r) >> (n * 4)) & 3)	/* CPUn Status Bit */
+#define CPUST_RUN	0		/* Run Mode */
+#define CPUST_STANDBY	3		/* CoreStandby Mode */
+
+/* Debug Resource Reset Control Register */
+#define DBGCPUREN	BIT(24)		/* CPU Other Reset Request Enable */
+#define DBGCPUNREN(n)	BIT((n) + 20)	/* CPUn Reset Request Enable */
+#define DBGCPUPREN	BIT(19)		/* CPU Peripheral Reset Req. Enable */
 
 static int __maybe_unused apmu_power_on(void __iomem *p, int bit)
 {
@@ -59,7 +71,7 @@ static int __maybe_unused apmu_power_off_poll(void __iomem *p, int bit)
 	int k;
 
 	for (k = 0; k < 1000; k++) {
-		if (((readl_relaxed(p + PSTR_OFFS) >> (bit * 4)) & 0x03) == 3)
+		if (CPUNST(readl_relaxed(p + PSTR_OFFS), bit) == CPUST_STANDBY)
 			return 1;
 
 		mdelay(1);
@@ -78,6 +90,8 @@ static int __maybe_unused apmu_wrap(int cpu, int (*fn)(void __iomem *p, int cpu)
 #ifdef CONFIG_SMP
 static void apmu_init_cpu(struct resource *res, int cpu, int bit)
 {
+	u32 x;
+
 	if ((cpu >= ARRAY_SIZE(apmu_cpus)) || apmu_cpus[cpu].iomem)
 		return;
 
@@ -85,6 +99,11 @@ static void apmu_init_cpu(struct resource *res, int cpu, int bit)
 	apmu_cpus[cpu].bit = bit;
 
 	pr_debug("apmu ioremap %d %d %pr\n", cpu, bit, res);
+
+	/* Setup for debug mode */
+	x = readl(apmu_cpus[cpu].iomem + DBGRCR_OFFS);
+	x |= DBGCPUREN | DBGCPUNREN(bit) | DBGCPUPREN;
+	writel(x, apmu_cpus[cpu].iomem + DBGRCR_OFFS);
 }
 
 static void apmu_parse_cfg(void (*fn)(struct resource *res, int cpu, int bit),
@@ -197,21 +216,9 @@ static void __init shmobile_smp_apmu_prepare_cpus_dt(unsigned int max_cpus)
 	rcar_gen2_pm_init();
 }
 
-static int shmobile_smp_apmu_boot_secondary_md21(unsigned int cpu,
-						 struct task_struct *idle)
-{
-	/* Error out when hardware debug mode is enabled */
-	if (rcar_gen2_read_mode_pins() & BIT(21)) {
-		pr_warn("Unable to boot CPU%u when MD21 is set\n", cpu);
-		return -ENOTSUPP;
-	}
-
-	return shmobile_smp_apmu_boot_secondary(cpu, idle);
-}
-
 static struct smp_operations apmu_smp_ops __initdata = {
 	.smp_prepare_cpus	= shmobile_smp_apmu_prepare_cpus_dt,
-	.smp_boot_secondary	= shmobile_smp_apmu_boot_secondary_md21,
+	.smp_boot_secondary	= shmobile_smp_apmu_boot_secondary,
 #ifdef CONFIG_HOTPLUG_CPU
 	.cpu_can_disable	= shmobile_smp_cpu_can_disable,
 	.cpu_die		= shmobile_smp_apmu_cpu_die,

arch/arm/mach-shmobile/pm-rcar-gen2.c

@@ -20,14 +20,30 @@
 
 /* RST */
 #define RST		0xe6160000
-#define CA15BAR		0x0020
-#define CA7BAR		0x0030
-#define CA15RESCNT	0x0040
-#define CA7RESCNT	0x0044
+
+#define CA15BAR		0x0020		/* CA15 Boot Address Register */
+#define CA7BAR		0x0030		/* CA7 Boot Address Register */
+#define CA15RESCNT	0x0040		/* CA15 Reset Control Register */
+#define CA7RESCNT	0x0044		/* CA7 Reset Control Register */
+
+/* SYS Boot Address Register */
+#define SBAR_BAREN	BIT(4)		/* SBAR is valid */
+
+/* Reset Control Registers */
+#define CA15RESCNT_CODE	0xa5a50000
+#define CA15RESCNT_CPUS	0xf		/* CPU0-3 */
+#define CA7RESCNT_CODE	0x5a5a0000
+#define CA7RESCNT_CPUS	0xf		/* CPU0-3 */
+
 
 /* On-chip RAM */
 #define ICRAM1		0xe63c0000	/* Inter Connect RAM1 (4 KiB) */
 
+static inline u32 phys_to_sbar(phys_addr_t addr)
+{
+	return (addr >> 8) & 0xfffffc00;
+}
+
 /* SYSC */
 #define SYSCIER 0x0c
 #define SYSCIMR 0x10
@@ -82,22 +98,24 @@ void __init rcar_gen2_pm_init(void)
 
 	/* setup reset vectors */
 	p = ioremap_nocache(RST, 0x63);
-	bar = (boot_vector_addr >> 8) & 0xfffffc00;
+	bar = phys_to_sbar(boot_vector_addr);
 	if (has_a15) {
 		writel_relaxed(bar, p + CA15BAR);
-		writel_relaxed(bar | 0x10, p + CA15BAR);
+		writel_relaxed(bar | SBAR_BAREN, p + CA15BAR);
 
 		/* de-assert reset for CA15 CPUs */
-		writel_relaxed((readl_relaxed(p + CA15RESCNT) & ~0x0f) |
-				0xa5a50000, p + CA15RESCNT);
+		writel_relaxed((readl_relaxed(p + CA15RESCNT) &
+				~CA15RESCNT_CPUS) | CA15RESCNT_CODE,
+			       p + CA15RESCNT);
 	}
 	if (has_a7) {
 		writel_relaxed(bar, p + CA7BAR);
-		writel_relaxed(bar | 0x10, p + CA7BAR);
+		writel_relaxed(bar | SBAR_BAREN, p + CA7BAR);
 
 		/* de-assert reset for CA7 CPUs */
-		writel_relaxed((readl_relaxed(p + CA7RESCNT) & ~0x0f) |
-				0x5a5a0000, p + CA7RESCNT);
+		writel_relaxed((readl_relaxed(p + CA7RESCNT) &
+				~CA7RESCNT_CPUS) | CA7RESCNT_CODE,
+			       p + CA7RESCNT);
 	}
 	iounmap(p);
 

arch/arm/mach-shmobile/rcar-gen2.h

@@ -2,8 +2,6 @@
 #define __ASM_RCAR_GEN2_H__
 
 void rcar_gen2_timer_init(void);
-#define MD(nr) BIT(nr)
-u32 rcar_gen2_read_mode_pins(void);
 void rcar_gen2_reserve(void);
 void rcar_gen2_pm_init(void);
 

arch/arm/mach-shmobile/setup-rcar-gen2.c

@@ -29,24 +29,6 @@
 #include "common.h"
 #include "rcar-gen2.h"
 
-#define MODEMR 0xe6160060
-
-u32 rcar_gen2_read_mode_pins(void)
-{
-	static u32 mode;
-	static bool mode_valid;
-
-	if (!mode_valid) {
-		void __iomem *modemr = ioremap_nocache(MODEMR, 4);
-		BUG_ON(!modemr);
-		mode = ioread32(modemr);
-		iounmap(modemr);
-		mode_valid = true;
-	}
-
-	return mode;
-}
-
 static unsigned int __init get_extal_freq(void)
 {
 	struct device_node *cpg, *extal;

arch/arm/mach-shmobile/smp-r8a7791.c

@@ -42,21 +42,9 @@ static void __init r8a7791_smp_prepare_cpus(unsigned int max_cpus)
 	rcar_gen2_pm_init();
 }
 
-static int r8a7791_smp_boot_secondary(unsigned int cpu,
-				      struct task_struct *idle)
-{
-	/* Error out when hardware debug mode is enabled */
-	if (rcar_gen2_read_mode_pins() & BIT(21)) {
-		pr_warn("Unable to boot CPU%u when MD21 is set\n", cpu);
-		return -ENOTSUPP;
-	}
-
-	return shmobile_smp_apmu_boot_secondary(cpu, idle);
-}
-
 const struct smp_operations r8a7791_smp_ops __initconst = {
 	.smp_prepare_cpus	= r8a7791_smp_prepare_cpus,
-	.smp_boot_secondary	= r8a7791_smp_boot_secondary,
+	.smp_boot_secondary	= shmobile_smp_apmu_boot_secondary,
 #ifdef CONFIG_HOTPLUG_CPU
 	.cpu_can_disable	= shmobile_smp_cpu_can_disable,
 	.cpu_die		= shmobile_smp_apmu_cpu_die,

arch/arm/mach-sunxi/sunxi.c

@@ -63,7 +63,9 @@ static const char * const sun8i_board_dt_compat[] = {
 	"allwinner,sun8i-a23",
 	"allwinner,sun8i-a33",
 	"allwinner,sun8i-a83t",
+	"allwinner,sun8i-h2-plus",
 	"allwinner,sun8i-h3",
+	"allwinner,sun8i-v3s",
 	NULL,
 };
 

arch/arm/mach-tegra/board-paz00.c

@@ -23,7 +23,7 @@
 
 #include "board.h"
 
-static struct property_entry __initdata wifi_rfkill_prop[] = {
+static struct property_entry wifi_rfkill_prop[] __initdata = {
 	PROPERTY_ENTRY_STRING("name", "wifi_rfkill"),
 	PROPERTY_ENTRY_STRING("type", "wlan"),
 	{ },

arch/arm/mach-ux500/Makefile

@@ -4,7 +4,6 @@
 
 obj-y				:= pm.o
 obj-$(CONFIG_UX500_SOC_DB8500)	+= cpu-db8500.o
-obj-$(CONFIG_MACH_MOP500)	+= board-mop500-audio.o
 obj-$(CONFIG_SMP)		+= platsmp.o
 obj-$(CONFIG_HOTPLUG_CPU)	+= hotplug.o
 obj-$(CONFIG_PM_GENERIC_DOMAINS) += pm_domains.o

arch/arm/mach-ux500/board-mop500-audio.c

@@ -1,77 +0,0 @@
-/*
- * Copyright (C) ST-Ericsson SA 2010
- *
- * License terms: GNU General Public License (GPL), version 2
- */
-
-#include <linux/platform_device.h>
-#include <linux/init.h>
-#include <linux/gpio.h>
-#include <linux/platform_data/dma-ste-dma40.h>
-
-#include <linux/platform_data/asoc-ux500-msp.h>
-
-#include "ste-dma40-db8500.h"
-#include "board-mop500.h"
-
-static struct stedma40_chan_cfg msp0_dma_rx = {
-	.high_priority = true,
-	.dir = DMA_DEV_TO_MEM,
-	.dev_type = DB8500_DMA_DEV31_MSP0_SLIM0_CH0,
-};
-
-static struct stedma40_chan_cfg msp0_dma_tx = {
-	.high_priority = true,
-	.dir = DMA_MEM_TO_DEV,
-	.dev_type = DB8500_DMA_DEV31_MSP0_SLIM0_CH0,
-};
-
-struct msp_i2s_platform_data msp0_platform_data = {
-	.id = 0,
-	.msp_i2s_dma_rx = &msp0_dma_rx,
-	.msp_i2s_dma_tx = &msp0_dma_tx,
-};
-
-static struct stedma40_chan_cfg msp1_dma_rx = {
-	.high_priority = true,
-	.dir = DMA_DEV_TO_MEM,
-	.dev_type = DB8500_DMA_DEV30_MSP3,
-};
-
-static struct stedma40_chan_cfg msp1_dma_tx = {
-	.high_priority = true,
-	.dir = DMA_MEM_TO_DEV,
-	.dev_type = DB8500_DMA_DEV30_MSP1,
-};
-
-struct msp_i2s_platform_data msp1_platform_data = {
-	.id = 1,
-	.msp_i2s_dma_rx = NULL,
-	.msp_i2s_dma_tx = &msp1_dma_tx,
-};
-
-static struct stedma40_chan_cfg msp2_dma_rx = {
-	.high_priority = true,
-	.dir = DMA_DEV_TO_MEM,
-	.dev_type = DB8500_DMA_DEV14_MSP2,
-};
-
-static struct stedma40_chan_cfg msp2_dma_tx = {
-	.high_priority = true,
-	.dir = DMA_MEM_TO_DEV,
-	.dev_type = DB8500_DMA_DEV14_MSP2,
-	.use_fixed_channel = true,
-	.phy_channel = 1,
-};
-
-struct msp_i2s_platform_data msp2_platform_data = {
-	.id = 2,
-	.msp_i2s_dma_rx = &msp2_dma_rx,
-	.msp_i2s_dma_tx = &msp2_dma_tx,
-};
-
-struct msp_i2s_platform_data msp3_platform_data = {
-	.id		= 3,
-	.msp_i2s_dma_rx	= &msp1_dma_rx,
-	.msp_i2s_dma_tx	= NULL,
-};

arch/arm/mach-ux500/board-mop500.h

@@ -1,17 +0,0 @@
-/*
- * Copyright (C) ST-Ericsson SA 2010
- *
- * License terms: GNU General Public License (GPL) version 2
- */
-
-#ifndef __BOARD_MOP500_H
-#define __BOARD_MOP500_H
-
-#include <linux/platform_data/asoc-ux500-msp.h>
-
-extern struct msp_i2s_platform_data msp0_platform_data;
-extern struct msp_i2s_platform_data msp1_platform_data;
-extern struct msp_i2s_platform_data msp2_platform_data;
-extern struct msp_i2s_platform_data msp3_platform_data;
-
-#endif

arch/arm/mach-ux500/cpu-db8500.c

@@ -12,7 +12,6 @@
 #include <linux/init.h>
 #include <linux/device.h>
 #include <linux/amba/bus.h>
-#include <linux/init.h>
 #include <linux/interrupt.h>
 #include <linux/irq.h>
 #include <linux/irqchip.h>
@@ -34,7 +33,6 @@
 
 #include "setup.h"
 
-#include "board-mop500.h"
 #include "db8500-regs.h"
 
 static int __init ux500_l2x0_unlock(void)
@@ -142,21 +140,6 @@ static struct arm_pmu_platdata db8500_pmu_platdata = {
 static struct of_dev_auxdata u8500_auxdata_lookup[] __initdata = {
 	/* Requires call-back bindings. */
 	OF_DEV_AUXDATA("arm,cortex-a9-pmu", 0, "arm-pmu", &db8500_pmu_platdata),
-	/* Requires DMA bindings. */
-	OF_DEV_AUXDATA("stericsson,ux500-msp-i2s", 0x80123000,
-		       "ux500-msp-i2s.0", &msp0_platform_data),
-	OF_DEV_AUXDATA("stericsson,ux500-msp-i2s", 0x80124000,
-		       "ux500-msp-i2s.1", &msp1_platform_data),
-	OF_DEV_AUXDATA("stericsson,ux500-msp-i2s", 0x80117000,
-		       "ux500-msp-i2s.2", &msp2_platform_data),
-	OF_DEV_AUXDATA("stericsson,ux500-msp-i2s", 0x80125000,
-		       "ux500-msp-i2s.3", &msp3_platform_data),
-	/* Requires non-DT:able platform data. */
-	OF_DEV_AUXDATA("stericsson,db8500-prcmu", 0x80157000, "db8500-prcmu", NULL),
-	OF_DEV_AUXDATA("stericsson,ux500-cryp", 0xa03cb000, "cryp1", NULL),
-	OF_DEV_AUXDATA("stericsson,ux500-hash", 0xa03c2000, "hash1", NULL),
-	OF_DEV_AUXDATA("stericsson,snd-soc-mop500", 0, "snd-soc-mop500.0",
-			NULL),
 	{},
 };
 

arch/arm/mach-ux500/platsmp.c

@@ -31,10 +31,14 @@
 #define UX500_CPU1_JUMPADDR_OFFSET 0x1FF4
 #define UX500_CPU1_WAKEMAGIC_OFFSET 0x1FF0
 
-static void wakeup_secondary(void)
+static void __iomem *backupram;
+
+static void __init ux500_smp_prepare_cpus(unsigned int max_cpus)
 {
 	struct device_node *np;
-	static void __iomem *backupram;
+	static void __iomem *scu_base;
+	unsigned int ncores;
+	int i;
 
 	np = of_find_compatible_node(NULL, NULL, "ste,dbx500-backupram");
 	if (!np) {
@@ -48,29 +52,6 @@ static void wakeup_secondary(void)
 		return;
 	}
 
-	/*
-	 * write the address of secondary startup into the backup ram register
-	 * at offset 0x1FF4, then write the magic number 0xA1FEED01 to the
-	 * backup ram register at offset 0x1FF0, which is what boot rom code
-	 * is waiting for. This will wake up the secondary core from WFE.
-	 */
-	writel(virt_to_phys(secondary_startup),
-	       backupram + UX500_CPU1_JUMPADDR_OFFSET);
-	writel(0xA1FEED01,
-	       backupram + UX500_CPU1_WAKEMAGIC_OFFSET);
-
-	/* make sure write buffer is drained */
-	mb();
-	iounmap(backupram);
-}
-
-static void __init ux500_smp_prepare_cpus(unsigned int max_cpus)
-{
-	struct device_node *np;
-	static void __iomem *scu_base;
-	unsigned int ncores;
-	int i;
-
 	np = of_find_compatible_node(NULL, NULL, "arm,cortex-a9-scu");
 	if (!np) {
 		pr_err("No SCU base address\n");
@@ -92,7 +73,19 @@ static void __init ux500_smp_prepare_cpus(unsigned int max_cpus)
 
 static int ux500_boot_secondary(unsigned int cpu, struct task_struct *idle)
 {
-	wakeup_secondary();
+	/*
+	 * write the address of secondary startup into the backup ram register
+	 * at offset 0x1FF4, then write the magic number 0xA1FEED01 to the
+	 * backup ram register at offset 0x1FF0, which is what boot rom code
+	 * is waiting for. This will wake up the secondary core from WFE.
+	 */
+	writel(virt_to_phys(secondary_startup),
+	       backupram + UX500_CPU1_JUMPADDR_OFFSET);
+	writel(0xA1FEED01,
+	       backupram + UX500_CPU1_WAKEMAGIC_OFFSET);
+
+	/* make sure write buffer is drained */
+	mb();
 	arch_send_wakeup_ipi_mask(cpumask_of(cpu));
 	return 0;
 }

arch/arm/mach-ux500/ste-dma40-db8500.h

@@ -1,85 +0,0 @@
-/*
- * arch/arm/mach-ux500/ste_dma40_db8500.h
- * DB8500-SoC-specific configuration for DMA40
- *
- * Copyright (C) ST-Ericsson 2007-2010
- * License terms: GNU General Public License (GPL) version 2
- * Author: Per Friden <per.friden@stericsson.com>
- * Author: Jonas Aaberg <jonas.aberg@stericsson.com>
- */
-#ifndef STE_DMA40_DB8500_H
-#define STE_DMA40_DB8500_H
-
-#define DB8500_DMA_NR_DEV 64
-
-/*
- * Unless otherwise specified, all channels numbers are used for
- * TX & RX, and can be used for either source or destination
- * channels.
- */
-enum dma_dev_type {
-	DB8500_DMA_DEV0_SPI0 = 0,
-	DB8500_DMA_DEV1_SD_MMC0 = 1,
-	DB8500_DMA_DEV2_SD_MMC1 = 2,
-	DB8500_DMA_DEV3_SD_MMC2 = 3,
-	DB8500_DMA_DEV4_I2C1 = 4,
-	DB8500_DMA_DEV5_I2C3 = 5,
-	DB8500_DMA_DEV6_I2C2 = 6,
-	DB8500_DMA_DEV7_I2C4 = 7,			/* Only on V1 and later */
-	DB8500_DMA_DEV8_SSP0 = 8,
-	DB8500_DMA_DEV9_SSP1 = 9,
-	DB8500_DMA_DEV10_MCDE_RX = 10,			/* RX only */
-	DB8500_DMA_DEV11_UART2 = 11,
-	DB8500_DMA_DEV12_UART1 = 12,
-	DB8500_DMA_DEV13_UART0 = 13,
-	DB8500_DMA_DEV14_MSP2 = 14,
-	DB8500_DMA_DEV15_I2C0 = 15,
-	DB8500_DMA_DEV16_USB_OTG_IEP_AND_OEP_7_15 = 16,
-	DB8500_DMA_DEV17_USB_OTG_IEP_AND_OEP_6_14 = 17,
-	DB8500_DMA_DEV18_USB_OTG_IEP_AND_OEP_5_13 = 18,
-	DB8500_DMA_DEV19_USB_OTG_IEP_AND_OEP_4_12 = 19,
-	DB8500_DMA_DEV20_SLIM0_CH0_HSI_CH0 = 20,
-	DB8500_DMA_DEV21_SLIM0_CH1_HSI_CH1 = 21,
-	DB8500_DMA_DEV22_SLIM0_CH2_HSI_CH2 = 22,
-	DB8500_DMA_DEV23_SLIM0_CH3_HSI_CH3 = 23,
-	DB8500_DMA_DEV24_SXA0 = 24,
-	DB8500_DMA_DEV25_SXA1 = 25,
-	DB8500_DMA_DEV26_SXA2 = 26,
-	DB8500_DMA_DEV27_SXA3 = 27,
-	DB8500_DMA_DEV28_SD_MM2 = 28,
-	DB8500_DMA_DEV29_SD_MM0 = 29,
-	DB8500_DMA_DEV30_MSP1 = 30,
-	/* On DB8500v2, MSP3 RX replaces MSP1 RX */
-	DB8500_DMA_DEV30_MSP3 = 30,
-	DB8500_DMA_DEV31_MSP0_SLIM0_CH0 = 31,
-	DB8500_DMA_DEV32_SD_MM1 = 32,
-	DB8500_DMA_DEV33_SPI2 = 33,
-	DB8500_DMA_DEV34_I2C3_RX2_TX2 = 34,
-	DB8500_DMA_DEV35_SPI1 = 35,
-	DB8500_DMA_DEV36_USB_OTG_IEP_AND_OEP_3_11 = 36,
-	DB8500_DMA_DEV37_USB_OTG_IEP_AND_OEP_2_10 = 37,
-	DB8500_DMA_DEV38_USB_OTG_IEP_AND_OEP_1_9 = 38,
-	DB8500_DMA_DEV39_USB_OTG_IEP_AND_OEP_8 = 39,
-	DB8500_DMA_DEV40_SPI3 = 40,
-	DB8500_DMA_DEV41_SD_MM3 = 41,
-	DB8500_DMA_DEV42_SD_MM4 = 42,
-	DB8500_DMA_DEV43_SD_MM5 = 43,
-	DB8500_DMA_DEV44_SXA4 = 44,
-	DB8500_DMA_DEV45_SXA5 = 45,
-	DB8500_DMA_DEV46_SLIM0_CH8_SRC_SXA6 = 46,
-	DB8500_DMA_DEV47_SLIM0_CH9_SRC_SXA7 = 47,
-	DB8500_DMA_DEV48_CAC1 = 48,
-	DB8500_DMA_DEV49_CAC1_TX_HAC1_TX = 49,		/* TX only */
-	DB8500_DMA_DEV50_HAC1_TX = 50,			/* TX only */
-	DB8500_DMA_MEMCPY_TX_0 = 51,			/* TX only */
-	DB8500_DMA_DEV52_SLIM0_CH4_HSI_CH4 = 52,
-	DB8500_DMA_DEV53_SLIM0_CH5_HSI_CH5 = 53,
-	DB8500_DMA_DEV54_SLIM0_CH6_HSI_CH6 = 54,
-	DB8500_DMA_DEV55_SLIM0_CH7_HSI_CH7 = 55,
-	/* 56 -> 60 are channels reserved for memcpy only */
-	DB8500_DMA_DEV61_CAC0 = 61,
-	DB8500_DMA_DEV62_CAC0_TX_HAC0_TX = 62,		/* TX only */
-	DB8500_DMA_DEV63_HAC0_TX = 63,			/* TX only */
-};
-
-#endif

arch/arm/plat-samsung/devs.c

@@ -77,15 +77,6 @@ static struct resource s3c_ac97_resource[] = {
 	[1] = DEFINE_RES_IRQ(IRQ_S3C244X_AC97),
 };
 
-static struct s3c_audio_pdata s3c_ac97_pdata = {
-#ifdef CONFIG_S3C24XX_DMAC
-	.dma_filter = s3c24xx_dma_filter,
-#endif
-	.dma_playback = (void *)DMACH_PCM_OUT,
-	.dma_capture = (void *)DMACH_PCM_IN,
-	.dma_capture_mic = (void *)DMACH_MIC_IN,
-};
-
 struct platform_device s3c_device_ac97 = {
 	.name		= "samsung-ac97",
 	.id		= -1,
@@ -94,7 +85,6 @@ struct platform_device s3c_device_ac97 = {
 	.dev		= {
 		.dma_mask		= &samsung_device_dma_mask,
 		.coherent_dma_mask	= DMA_BIT_MASK(32),
-		.platform_data		= &s3c_ac97_pdata,
 	}
 };
 #endif /* CONFIG_CPU_S3C2440 */
@@ -574,14 +564,6 @@ static struct resource s3c_iis_resource[] = {
 	[0] = DEFINE_RES_MEM(S3C24XX_PA_IIS, S3C24XX_SZ_IIS),
 };
 
-static struct s3c_audio_pdata s3c_iis_platdata = {
-#ifdef CONFIG_S3C24XX_DMAC
-	.dma_filter = s3c24xx_dma_filter,
-#endif
-	.dma_playback = (void *)DMACH_I2S_OUT,
-	.dma_capture = (void *)DMACH_I2S_IN,
-};
-
 struct platform_device s3c_device_iis = {
 	.name		= "s3c24xx-iis",
 	.id		= -1,
@@ -590,7 +572,6 @@ struct platform_device s3c_device_iis = {
 	.dev		= {
 		.dma_mask		= &samsung_device_dma_mask,
 		.coherent_dma_mask	= DMA_BIT_MASK(32),
-		.platform_data		= &s3c_iis_platdata,
 	}
 };
 #endif /* CONFIG_PLAT_S3C24XX */

arch/arm/plat-samsung/include/plat/wakeup-mask.h

@@ -38,7 +38,7 @@ struct samsung_wakeup_mask {
  * required to be correct before we enter sleep.
  */
 extern void samsung_sync_wakemask(void __iomem *reg,
-				  struct samsung_wakeup_mask *masks,
+				  const struct samsung_wakeup_mask *masks,
 				  int nr_masks);
 
 #endif /* __PLAT_WAKEUP_MASK_H */

arch/arm/plat-samsung/wakeup-mask.c

@@ -20,7 +20,7 @@
 #include <plat/pm.h>
 
 void samsung_sync_wakemask(void __iomem *reg,
-			   struct samsung_wakeup_mask *mask, int nr_mask)
+			   const struct samsung_wakeup_mask *mask, int nr_mask)
 {
 	struct irq_data *data;
 	u32 val;

drivers/soc/dove/pmu.c

@@ -87,7 +87,7 @@ static int pmu_reset_deassert(struct reset_controller_dev *rc, unsigned long id)
 	return 0;
 }
 
-static struct reset_control_ops pmu_reset_ops = {
+static const struct reset_control_ops pmu_reset_ops = {
 	.reset = pmu_reset_reset,
 	.assert = pmu_reset_assert,
 	.deassert = pmu_reset_deassert,