powerpc/bpf/jit: Isolate classic BPF JIT specifics into a separate header

Break out classic BPF JIT specifics into a separate header in
preparation for eBPF JIT implementation. Note that ppc32 will still need
the classic BPF JIT.

Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

arch/powerpc/net/bpf_jit.h

@@ -1,4 +1,5 @@
-/* bpf_jit.h: BPF JIT compiler for PPC64
+/*
+ * bpf_jit.h: BPF JIT compiler for PPC
  *
  * Copyright 2011 Matt Evans <matt@ozlabs.org>, IBM Corporation
  *
@@ -10,66 +11,8 @@
 #ifndef _BPF_JIT_H
 #define _BPF_JIT_H
 
-#ifdef CONFIG_PPC64
-#define BPF_PPC_STACK_R3_OFF	48
-#define BPF_PPC_STACK_LOCALS	32
-#define BPF_PPC_STACK_BASIC	(48+64)
-#define BPF_PPC_STACK_SAVE	(18*8)
-#define BPF_PPC_STACKFRAME	(BPF_PPC_STACK_BASIC+BPF_PPC_STACK_LOCALS+ \
-				 BPF_PPC_STACK_SAVE)
-#define BPF_PPC_SLOWPATH_FRAME	(48+64)
-#else
-#define BPF_PPC_STACK_R3_OFF	24
-#define BPF_PPC_STACK_LOCALS	16
-#define BPF_PPC_STACK_BASIC	(24+32)
-#define BPF_PPC_STACK_SAVE	(18*4)
-#define BPF_PPC_STACKFRAME	(BPF_PPC_STACK_BASIC+BPF_PPC_STACK_LOCALS+ \
-				 BPF_PPC_STACK_SAVE)
-#define BPF_PPC_SLOWPATH_FRAME	(24+32)
-#endif
-
-#define REG_SZ         (BITS_PER_LONG/8)
-
-/*
- * Generated code register usage:
- *
- * As normal PPC C ABI (e.g. r1=sp, r2=TOC), with:
- *
- * skb		r3	(Entry parameter)
- * A register	r4
- * X register	r5
- * addr param	r6
- * r7-r10	scratch
- * skb->data	r14
- * skb headlen	r15	(skb->len - skb->data_len)
- * m[0]		r16
- * m[...]	...
- * m[15]	r31
- */
-#define r_skb		3
-#define r_ret		3
-#define r_A		4
-#define r_X		5
-#define r_addr		6
-#define r_scratch1	7
-#define r_scratch2	8
-#define r_D		14
-#define r_HL		15
-#define r_M		16
-
 #ifndef __ASSEMBLY__
 
-/*
- * Assembly helpers from arch/powerpc/net/bpf_jit.S:
- */
-#define DECLARE_LOAD_FUNC(func)	\
-	extern u8 func[], func##_negative_offset[], func##_positive_offset[]
-
-DECLARE_LOAD_FUNC(sk_load_word);
-DECLARE_LOAD_FUNC(sk_load_half);
-DECLARE_LOAD_FUNC(sk_load_byte);
-DECLARE_LOAD_FUNC(sk_load_byte_msh);
-
 #ifdef CONFIG_PPC64
 #define FUNCTION_DESCR_SIZE	24
 #else
@@ -131,46 +74,6 @@ DECLARE_LOAD_FUNC(sk_load_byte_msh);
 #define PPC_BPF_STLU(r, base, i) do { PPC_STWU(r, base, i); } while(0)
 #endif
 
-/* Convenience helpers for the above with 'far' offsets: */
-#define PPC_LBZ_OFFS(r, base, i) do { if ((i) < 32768) PPC_LBZ(r, base, i);   \
-		else {	PPC_ADDIS(r, base, IMM_HA(i));			      \
-			PPC_LBZ(r, r, IMM_L(i)); } } while(0)
-
-#define PPC_LD_OFFS(r, base, i) do { if ((i) < 32768) PPC_LD(r, base, i);     \
-		else {	PPC_ADDIS(r, base, IMM_HA(i));			      \
-			PPC_LD(r, r, IMM_L(i)); } } while(0)
-
-#define PPC_LWZ_OFFS(r, base, i) do { if ((i) < 32768) PPC_LWZ(r, base, i);   \
-		else {	PPC_ADDIS(r, base, IMM_HA(i));			      \
-			PPC_LWZ(r, r, IMM_L(i)); } } while(0)
-
-#define PPC_LHZ_OFFS(r, base, i) do { if ((i) < 32768) PPC_LHZ(r, base, i);   \
-		else {	PPC_ADDIS(r, base, IMM_HA(i));			      \
-			PPC_LHZ(r, r, IMM_L(i)); } } while(0)
-
-#ifdef CONFIG_PPC64
-#define PPC_LL_OFFS(r, base, i) do { PPC_LD_OFFS(r, base, i); } while(0)
-#else
-#define PPC_LL_OFFS(r, base, i) do { PPC_LWZ_OFFS(r, base, i); } while(0)
-#endif
-
-#ifdef CONFIG_SMP
-#ifdef CONFIG_PPC64
-#define PPC_BPF_LOAD_CPU(r)		\
-	do { BUILD_BUG_ON(FIELD_SIZEOF(struct paca_struct, paca_index) != 2);	\
-		PPC_LHZ_OFFS(r, 13, offsetof(struct paca_struct, paca_index));		\
-	} while (0)
-#else
-#define PPC_BPF_LOAD_CPU(r)     \
-	do { BUILD_BUG_ON(FIELD_SIZEOF(struct thread_info, cpu) != 4);			\
-		PPC_LHZ_OFFS(r, (1 & ~(THREAD_SIZE - 1)),							\
-				offsetof(struct thread_info, cpu));							\
-	} while(0)
-#endif
-#else
-#define PPC_BPF_LOAD_CPU(r) do { PPC_LI(r, 0); } while(0)
-#endif
-
 #define PPC_CMPWI(a, i)		EMIT(PPC_INST_CMPWI | ___PPC_RA(a) | IMM_L(i))
 #define PPC_CMPDI(a, i)		EMIT(PPC_INST_CMPDI | ___PPC_RA(a) | IMM_L(i))
 #define PPC_CMPLWI(a, i)	EMIT(PPC_INST_CMPLWI | ___PPC_RA(a) | IMM_L(i))
@@ -273,14 +176,6 @@ DECLARE_LOAD_FUNC(sk_load_byte_msh);
 #define PPC_FUNC_ADDR(d,i) do { PPC_LI32(d, i); } while(0)
 #endif
 
-#define PPC_LHBRX_OFFS(r, base, i) \
-		do { PPC_LI32(r, i); PPC_LHBRX(r, r, base); } while(0)
-#ifdef __LITTLE_ENDIAN__
-#define PPC_NTOHS_OFFS(r, base, i)	PPC_LHBRX_OFFS(r, base, i)
-#else
-#define PPC_NTOHS_OFFS(r, base, i)	PPC_LHZ_OFFS(r, base, i)
-#endif
-
 static inline bool is_nearbranch(int offset)
 {
 	return (offset < 32768) && (offset >= -32768);
@@ -317,18 +212,6 @@ static inline bool is_nearbranch(int offset)
 #define COND_NE		(CR0_EQ | COND_CMP_FALSE)
 #define COND_LT		(CR0_LT | COND_CMP_TRUE)
 
-#define SEEN_DATAREF 0x10000 /* might call external helpers */
-#define SEEN_XREG    0x20000 /* X reg is used */
-#define SEEN_MEM     0x40000 /* SEEN_MEM+(1<<n) = use mem[n] for temporary
-			      * storage */
-#define SEEN_MEM_MSK 0x0ffff
-
-struct codegen_context {
-	unsigned int seen;
-	unsigned int idx;
-	int pc_ret0; /* bpf index of first RET #0 instruction (if any) */
-};
-
 #endif
 
 #endif

arch/powerpc/net/bpf_jit32.h

@@ -0,0 +1,139 @@
+/*
+ * bpf_jit32.h: BPF JIT compiler for PPC
+ *
+ * Copyright 2011 Matt Evans <matt@ozlabs.org>, IBM Corporation
+ *
+ * Split from bpf_jit.h
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; version 2
+ * of the License.
+ */
+#ifndef _BPF_JIT32_H
+#define _BPF_JIT32_H
+
+#include "bpf_jit.h"
+
+#ifdef CONFIG_PPC64
+#define BPF_PPC_STACK_R3_OFF	48
+#define BPF_PPC_STACK_LOCALS	32
+#define BPF_PPC_STACK_BASIC	(48+64)
+#define BPF_PPC_STACK_SAVE	(18*8)
+#define BPF_PPC_STACKFRAME	(BPF_PPC_STACK_BASIC+BPF_PPC_STACK_LOCALS+ \
+				 BPF_PPC_STACK_SAVE)
+#define BPF_PPC_SLOWPATH_FRAME	(48+64)
+#else
+#define BPF_PPC_STACK_R3_OFF	24
+#define BPF_PPC_STACK_LOCALS	16
+#define BPF_PPC_STACK_BASIC	(24+32)
+#define BPF_PPC_STACK_SAVE	(18*4)
+#define BPF_PPC_STACKFRAME	(BPF_PPC_STACK_BASIC+BPF_PPC_STACK_LOCALS+ \
+				 BPF_PPC_STACK_SAVE)
+#define BPF_PPC_SLOWPATH_FRAME	(24+32)
+#endif
+
+#define REG_SZ         (BITS_PER_LONG/8)
+
+/*
+ * Generated code register usage:
+ *
+ * As normal PPC C ABI (e.g. r1=sp, r2=TOC), with:
+ *
+ * skb		r3	(Entry parameter)
+ * A register	r4
+ * X register	r5
+ * addr param	r6
+ * r7-r10	scratch
+ * skb->data	r14
+ * skb headlen	r15	(skb->len - skb->data_len)
+ * m[0]		r16
+ * m[...]	...
+ * m[15]	r31
+ */
+#define r_skb		3
+#define r_ret		3
+#define r_A		4
+#define r_X		5
+#define r_addr		6
+#define r_scratch1	7
+#define r_scratch2	8
+#define r_D		14
+#define r_HL		15
+#define r_M		16
+
+#ifndef __ASSEMBLY__
+
+/*
+ * Assembly helpers from arch/powerpc/net/bpf_jit.S:
+ */
+#define DECLARE_LOAD_FUNC(func)	\
+	extern u8 func[], func##_negative_offset[], func##_positive_offset[]
+
+DECLARE_LOAD_FUNC(sk_load_word);
+DECLARE_LOAD_FUNC(sk_load_half);
+DECLARE_LOAD_FUNC(sk_load_byte);
+DECLARE_LOAD_FUNC(sk_load_byte_msh);
+
+#define PPC_LBZ_OFFS(r, base, i) do { if ((i) < 32768) PPC_LBZ(r, base, i);   \
+		else {	PPC_ADDIS(r, base, IMM_HA(i));			      \
+			PPC_LBZ(r, r, IMM_L(i)); } } while(0)
+
+#define PPC_LD_OFFS(r, base, i) do { if ((i) < 32768) PPC_LD(r, base, i);     \
+		else {	PPC_ADDIS(r, base, IMM_HA(i));			      \
+			PPC_LD(r, r, IMM_L(i)); } } while(0)
+
+#define PPC_LWZ_OFFS(r, base, i) do { if ((i) < 32768) PPC_LWZ(r, base, i);   \
+		else {	PPC_ADDIS(r, base, IMM_HA(i));			      \
+			PPC_LWZ(r, r, IMM_L(i)); } } while(0)
+
+#define PPC_LHZ_OFFS(r, base, i) do { if ((i) < 32768) PPC_LHZ(r, base, i);   \
+		else {	PPC_ADDIS(r, base, IMM_HA(i));			      \
+			PPC_LHZ(r, r, IMM_L(i)); } } while(0)
+
+#ifdef CONFIG_PPC64
+#define PPC_LL_OFFS(r, base, i) do { PPC_LD_OFFS(r, base, i); } while(0)
+#else
+#define PPC_LL_OFFS(r, base, i) do { PPC_LWZ_OFFS(r, base, i); } while(0)
+#endif
+
+#ifdef CONFIG_SMP
+#ifdef CONFIG_PPC64
+#define PPC_BPF_LOAD_CPU(r)		\
+	do { BUILD_BUG_ON(FIELD_SIZEOF(struct paca_struct, paca_index) != 2);	\
+		PPC_LHZ_OFFS(r, 13, offsetof(struct paca_struct, paca_index));	\
+	} while (0)
+#else
+#define PPC_BPF_LOAD_CPU(r)     \
+	do { BUILD_BUG_ON(FIELD_SIZEOF(struct thread_info, cpu) != 4);		\
+		PPC_LHZ_OFFS(r, (1 & ~(THREAD_SIZE - 1)),			\
+				offsetof(struct thread_info, cpu));		\
+	} while(0)
+#endif
+#else
+#define PPC_BPF_LOAD_CPU(r) do { PPC_LI(r, 0); } while(0)
+#endif
+
+#define PPC_LHBRX_OFFS(r, base, i) \
+		do { PPC_LI32(r, i); PPC_LHBRX(r, r, base); } while(0)
+#ifdef __LITTLE_ENDIAN__
+#define PPC_NTOHS_OFFS(r, base, i)	PPC_LHBRX_OFFS(r, base, i)
+#else
+#define PPC_NTOHS_OFFS(r, base, i)	PPC_LHZ_OFFS(r, base, i)
+#endif
+
+#define SEEN_DATAREF 0x10000 /* might call external helpers */
+#define SEEN_XREG    0x20000 /* X reg is used */
+#define SEEN_MEM     0x40000 /* SEEN_MEM+(1<<n) = use mem[n] for temporary
+			      * storage */
+#define SEEN_MEM_MSK 0x0ffff
+
+struct codegen_context {
+	unsigned int seen;
+	unsigned int idx;
+	int pc_ret0; /* bpf index of first RET #0 instruction (if any) */
+};
+
+#endif
+
+#endif

arch/powerpc/net/bpf_jit_asm.S

@@ -10,7 +10,7 @@
  */
 
 #include <asm/ppc_asm.h>
-#include "bpf_jit.h"
+#include "bpf_jit32.h"
 
 /*
  * All of these routines are called directly from generated code,

arch/powerpc/net/bpf_jit_comp.c

@@ -16,7 +16,7 @@
 #include <linux/filter.h>
 #include <linux/if_vlan.h>
 
-#include "bpf_jit.h"
+#include "bpf_jit32.h"
 
 int bpf_jit_enable __read_mostly;