Merge branch 'linus' into perf/core, to pick up fixes

Signed-off-by: Ingo Molnar <mingo@kernel.org>

CREDITS

@@ -1864,10 +1864,11 @@ S: The Netherlands
 
 N: Martin Kepplinger
 E: martink@posteo.de
-E: martin.kepplinger@theobroma-systems.com
+E: martin.kepplinger@ginzinger.com
 W: http://www.martinkepplinger.com
 D: mma8452 accelerators iio driver
-D: Kernel cleanups
+D: pegasus_notetaker input driver
+D: Kernel fixes and cleanups
 S: Garnisonstraße 26
 S: 4020 Linz
 S: Austria

Documentation/ABI/testing/sysfs-class-cxl

@@ -220,8 +220,11 @@ What:           /sys/class/cxl/<card>/reset
 Date:           October 2014
 Contact:        linuxppc-dev@lists.ozlabs.org
 Description:    write only
-                Writing 1 will issue a PERST to card which may cause the card
-                to reload the FPGA depending on load_image_on_perst.
+                Writing 1 will issue a PERST to card provided there are no
+                contexts active on any one of the card AFUs. This may cause
+                the card to reload the FPGA depending on load_image_on_perst.
+                Writing -1 will do a force PERST irrespective of any active
+                contexts on the card AFUs.
 Users:		https://github.com/ibm-capi/libcxl
 
 What:		/sys/class/cxl/<card>/perst_reloads_same_image (not in a guest)

Documentation/ABI/testing/sysfs-devices-system-ibm-rtl

@@ -1,4 +1,4 @@
-What:           state
+What:           /sys/devices/system/ibm_rtl/state
 Date:           Sep 2010
 KernelVersion:  2.6.37
 Contact:        Vernon Mauery <vernux@us.ibm.com>
@@ -10,7 +10,7 @@ Description:    The state file allows a means by which to change in and
 Users:          The ibm-prtm userspace daemon uses this interface.
 
 
-What:           version
+What:           /sys/devices/system/ibm_rtl/version
 Date:           Sep 2010
 KernelVersion:  2.6.37
 Contact:        Vernon Mauery <vernux@us.ibm.com>

Documentation/device-mapper/dm-raid.txt

@@ -309,3 +309,4 @@ Version History
 	with a reshape in progress.
 1.9.0   Add support for RAID level takeover/reshape/region size
 	and set size reduction.
+1.9.1   Fix activation of existing RAID 4/10 mapped devices

Documentation/devicetree/bindings/clock/uniphier-clock.txt

@@ -24,7 +24,7 @@ Example:
 		reg = <0x61840000 0x4000>;
 
 		clock {
-			compatible = "socionext,uniphier-ld20-clock";
+			compatible = "socionext,uniphier-ld11-clock";
 			#clock-cells = <1>;
 		};
 
@@ -43,8 +43,8 @@ Provided clocks:
 21: USB3 ch1 PHY1
 
 
-Media I/O (MIO) clock
----------------------
+Media I/O (MIO) clock, SD clock
+-------------------------------
 
 Required properties:
 - compatible: should be one of the following:
@@ -52,10 +52,10 @@ Required properties:
     "socionext,uniphier-ld4-mio-clock"  - for LD4 SoC.
     "socionext,uniphier-pro4-mio-clock" - for Pro4 SoC.
     "socionext,uniphier-sld8-mio-clock" - for sLD8 SoC.
-    "socionext,uniphier-pro5-mio-clock" - for Pro5 SoC.
-    "socionext,uniphier-pxs2-mio-clock" - for PXs2/LD6b SoC.
+    "socionext,uniphier-pro5-sd-clock"  - for Pro5 SoC.
+    "socionext,uniphier-pxs2-sd-clock"  - for PXs2/LD6b SoC.
     "socionext,uniphier-ld11-mio-clock" - for LD11 SoC.
-    "socionext,uniphier-ld20-mio-clock" - for LD20 SoC.
+    "socionext,uniphier-ld20-sd-clock"  - for LD20 SoC.
 - #clock-cells: should be 1.
 
 Example:
@@ -66,7 +66,7 @@ Example:
 		reg = <0x59810000 0x800>;
 
 		clock {
-			compatible = "socionext,uniphier-ld20-mio-clock";
+			compatible = "socionext,uniphier-ld11-mio-clock";
 			#clock-cells = <1>;
 		};
 
@@ -112,7 +112,7 @@ Example:
 		reg = <0x59820000 0x200>;
 
 		clock {
-			compatible = "socionext,uniphier-ld20-peri-clock";
+			compatible = "socionext,uniphier-ld11-peri-clock";
 			#clock-cells = <1>;
 		};
 

Documentation/devicetree/bindings/ipmi/aspeed,ast2400-ibt-bmc.txt

@@ -0,0 +1,23 @@
+* Aspeed BT (Block Transfer) IPMI interface
+
+The Aspeed SOCs (AST2400 and AST2500) are commonly used as BMCs
+(BaseBoard Management Controllers) and the BT interface can be used to
+perform in-band IPMI communication with their host.
+
+Required properties:
+
+- compatible : should be "aspeed,ast2400-ibt-bmc"
+- reg: physical address and size of the registers
+
+Optional properties:
+
+- interrupts: interrupt generated by the BT interface. without an
+  interrupt, the driver will operate in poll mode.
+
+Example:
+
+	ibt@1e789140 {
+		compatible = "aspeed,ast2400-ibt-bmc";
+		reg = <0x1e789140 0x18>;
+		interrupts = <8>;
+	};

Documentation/devicetree/bindings/mmc/synopsys-dw-mshc.txt

@@ -43,6 +43,9 @@ Optional properties:
   reset signal present internally in some host controller IC designs.
   See Documentation/devicetree/bindings/reset/reset.txt for details.
 
+* reset-names: request name for using "resets" property. Must be "reset".
+	(It will be used together with "resets" property.)
+
 * clocks: from common clock binding: handle to biu and ciu clocks for the
   bus interface unit clock and the card interface unit clock.
 
@@ -103,6 +106,8 @@ board specific portions as listed below.
 		interrupts = <0 75 0>;
 		#address-cells = <1>;
 		#size-cells = <0>;
+		resets = <&rst 20>;
+		reset-names = "reset";
 	};
 
 [board specific internal DMA resources]

Documentation/devicetree/bindings/net/marvell-orion-net.txt

@@ -49,6 +49,7 @@ Optional port properties:
 and
 
  - phy-handle: See ethernet.txt file in the same directory.
+ - phy-mode: See ethernet.txt file in the same directory.
 
 or
 

Documentation/devicetree/bindings/pci/rockchip-pcie.txt

@@ -26,13 +26,16 @@ Required properties:
 	- "sys"
 	- "legacy"
 	- "client"
-- resets: Must contain five entries for each entry in reset-names.
+- resets: Must contain seven entries for each entry in reset-names.
 	   See ../reset/reset.txt for details.
 - reset-names: Must include the following names
 	- "core"
 	- "mgmt"
 	- "mgmt-sticky"
 	- "pipe"
+	- "pm"
+	- "aclk"
+	- "pclk"
 - pinctrl-names : The pin control state names
 - pinctrl-0: The "default" pinctrl state
 - #interrupt-cells: specifies the number of cells needed to encode an
@@ -86,8 +89,10 @@ pcie0: pcie@f8000000 {
 	reg = <0x0 0xf8000000 0x0 0x2000000>, <0x0 0xfd000000 0x0 0x1000000>;
 	reg-names = "axi-base", "apb-base";
 	resets = <&cru SRST_PCIE_CORE>, <&cru SRST_PCIE_MGMT>,
-		 <&cru SRST_PCIE_MGMT_STICKY>, <&cru SRST_PCIE_PIPE>;
-	reset-names = "core", "mgmt", "mgmt-sticky", "pipe";
+		 <&cru SRST_PCIE_MGMT_STICKY>, <&cru SRST_PCIE_PIPE> ,
+		 <&cru SRST_PCIE_PM>, <&cru SRST_P_PCIE>, <&cru SRST_A_PCIE>;
+	reset-names = "core", "mgmt", "mgmt-sticky", "pipe",
+		      "pm", "pclk", "aclk";
 	phys = <&pcie_phy>;
 	phy-names = "pcie-phy";
 	pinctrl-names = "default";

Documentation/devicetree/bindings/pinctrl/pinctrl-aspeed.txt

@@ -43,7 +43,9 @@ aspeed,ast2500-pinctrl, aspeed,g5-pinctrl:
 
 GPID0 GPID2 GPIE0 I2C10 I2C11 I2C12 I2C13 I2C14 I2C3 I2C4 I2C5 I2C6 I2C7 I2C8
 I2C9 MAC1LINK MDIO1 MDIO2 OSCCLK PEWAKE PWM0 PWM1 PWM2 PWM3 PWM4 PWM5 PWM6 PWM7
-RGMII1 RGMII2 RMII1 RMII2 SD1 SPI1 TIMER4 TIMER5 TIMER6 TIMER7 TIMER8
+RGMII1 RGMII2 RMII1 RMII2 SD1 SPI1 SPI1DEBUG SPI1PASSTHRU TIMER4 TIMER5 TIMER6
+TIMER7 TIMER8 VGABIOSROM
+
 
 Examples:
 

Documentation/devicetree/bindings/pinctrl/st,stm32-pinctrl.txt

@@ -14,11 +14,6 @@ Required properies:
  - #size-cells	: The value of this property must be 1
  - ranges	: defines mapping between pin controller node (parent) to
    gpio-bank node (children).
- - interrupt-parent: phandle of the interrupt parent to which the external
-   GPIO interrupts are forwarded to.
- - st,syscfg: Should be phandle/offset pair. The phandle to the syscon node
-   which includes IRQ mux selection register, and the offset of the IRQ mux
-   selection register.
  - pins-are-numbered: Specify the subnodes are using numbered pinmux to
    specify pins.
 
@@ -37,6 +32,11 @@ Required properties:
 
 Optional properties:
  - reset:	  : Reference to the reset controller
+ - interrupt-parent: phandle of the interrupt parent to which the external
+   GPIO interrupts are forwarded to.
+ - st,syscfg: Should be phandle/offset pair. The phandle to the syscon node
+   which includes IRQ mux selection register, and the offset of the IRQ mux
+   selection register.
 
 Example:
 #include <dt-bindings/pinctrl/stm32f429-pinfunc.h>

Documentation/devicetree/bindings/reset/uniphier-reset.txt

@@ -6,25 +6,25 @@ System reset
 
 Required properties:
 - compatible: should be one of the following:
-    "socionext,uniphier-sld3-reset" - for PH1-sLD3 SoC.
-    "socionext,uniphier-ld4-reset"  - for PH1-LD4 SoC.
-    "socionext,uniphier-pro4-reset" - for PH1-Pro4 SoC.
-    "socionext,uniphier-sld8-reset" - for PH1-sLD8 SoC.
-    "socionext,uniphier-pro5-reset" - for PH1-Pro5 SoC.
-    "socionext,uniphier-pxs2-reset" - for ProXstream2/PH1-LD6b SoC.
-    "socionext,uniphier-ld11-reset" - for PH1-LD11 SoC.
-    "socionext,uniphier-ld20-reset" - for PH1-LD20 SoC.
+    "socionext,uniphier-sld3-reset" - for sLD3 SoC.
+    "socionext,uniphier-ld4-reset"  - for LD4 SoC.
+    "socionext,uniphier-pro4-reset" - for Pro4 SoC.
+    "socionext,uniphier-sld8-reset" - for sLD8 SoC.
+    "socionext,uniphier-pro5-reset" - for Pro5 SoC.
+    "socionext,uniphier-pxs2-reset" - for PXs2/LD6b SoC.
+    "socionext,uniphier-ld11-reset" - for LD11 SoC.
+    "socionext,uniphier-ld20-reset" - for LD20 SoC.
 - #reset-cells: should be 1.
 
 Example:
 
 	sysctrl@61840000 {
-		compatible = "socionext,uniphier-ld20-sysctrl",
+		compatible = "socionext,uniphier-ld11-sysctrl",
 			     "simple-mfd", "syscon";
 		reg = <0x61840000 0x4000>;
 
 		reset {
-			compatible = "socionext,uniphier-ld20-reset";
+			compatible = "socionext,uniphier-ld11-reset";
 			#reset-cells = <1>;
 		};
 
@@ -32,30 +32,30 @@ Example:
 	};
 
 
-Media I/O (MIO) reset
----------------------
+Media I/O (MIO) reset, SD reset
+-------------------------------
 
 Required properties:
 - compatible: should be one of the following:
-    "socionext,uniphier-sld3-mio-reset" - for PH1-sLD3 SoC.
-    "socionext,uniphier-ld4-mio-reset"  - for PH1-LD4 SoC.
-    "socionext,uniphier-pro4-mio-reset" - for PH1-Pro4 SoC.
-    "socionext,uniphier-sld8-mio-reset" - for PH1-sLD8 SoC.
-    "socionext,uniphier-pro5-mio-reset" - for PH1-Pro5 SoC.
-    "socionext,uniphier-pxs2-mio-reset" - for ProXstream2/PH1-LD6b SoC.
-    "socionext,uniphier-ld11-mio-reset" - for PH1-LD11 SoC.
-    "socionext,uniphier-ld20-mio-reset" - for PH1-LD20 SoC.
+    "socionext,uniphier-sld3-mio-reset" - for sLD3 SoC.
+    "socionext,uniphier-ld4-mio-reset"  - for LD4 SoC.
+    "socionext,uniphier-pro4-mio-reset" - for Pro4 SoC.
+    "socionext,uniphier-sld8-mio-reset" - for sLD8 SoC.
+    "socionext,uniphier-pro5-sd-reset"  - for Pro5 SoC.
+    "socionext,uniphier-pxs2-sd-reset"  - for PXs2/LD6b SoC.
+    "socionext,uniphier-ld11-mio-reset" - for LD11 SoC.
+    "socionext,uniphier-ld20-sd-reset"  - for LD20 SoC.
 - #reset-cells: should be 1.
 
 Example:
 
 	mioctrl@59810000 {
-		compatible = "socionext,uniphier-ld20-mioctrl",
+		compatible = "socionext,uniphier-ld11-mioctrl",
 			     "simple-mfd", "syscon";
 		reg = <0x59810000 0x800>;
 
 		reset {
-			compatible = "socionext,uniphier-ld20-mio-reset";
+			compatible = "socionext,uniphier-ld11-mio-reset";
 			#reset-cells = <1>;
 		};
 
@@ -68,24 +68,24 @@ Peripheral reset
 
 Required properties:
 - compatible: should be one of the following:
-    "socionext,uniphier-ld4-peri-reset"  - for PH1-LD4 SoC.
-    "socionext,uniphier-pro4-peri-reset" - for PH1-Pro4 SoC.
-    "socionext,uniphier-sld8-peri-reset" - for PH1-sLD8 SoC.
-    "socionext,uniphier-pro5-peri-reset" - for PH1-Pro5 SoC.
-    "socionext,uniphier-pxs2-peri-reset" - for ProXstream2/PH1-LD6b SoC.
-    "socionext,uniphier-ld11-peri-reset" - for PH1-LD11 SoC.
-    "socionext,uniphier-ld20-peri-reset" - for PH1-LD20 SoC.
+    "socionext,uniphier-ld4-peri-reset"  - for LD4 SoC.
+    "socionext,uniphier-pro4-peri-reset" - for Pro4 SoC.
+    "socionext,uniphier-sld8-peri-reset" - for sLD8 SoC.
+    "socionext,uniphier-pro5-peri-reset" - for Pro5 SoC.
+    "socionext,uniphier-pxs2-peri-reset" - for PXs2/LD6b SoC.
+    "socionext,uniphier-ld11-peri-reset" - for LD11 SoC.
+    "socionext,uniphier-ld20-peri-reset" - for LD20 SoC.
 - #reset-cells: should be 1.
 
 Example:
 
 	perictrl@59820000 {
-		compatible = "socionext,uniphier-ld20-perictrl",
+		compatible = "socionext,uniphier-ld11-perictrl",
 			     "simple-mfd", "syscon";
 		reg = <0x59820000 0x200>;
 
 		reset {
-			compatible = "socionext,uniphier-ld20-peri-reset";
+			compatible = "socionext,uniphier-ld11-peri-reset";
 			#reset-cells = <1>;
 		};
 

Documentation/devicetree/bindings/serial/cdns,uart.txt

@@ -1,7 +1,9 @@
 Binding for Cadence UART Controller
 
 Required properties:
-- compatible : should be "cdns,uart-r1p8", or "xlnx,xuartps"
+- compatible :
+  Use "xlnx,xuartps","cdns,uart-r1p8" for Zynq-7xxx SoC.
+  Use "xlnx,zynqmp-uart","cdns,uart-r1p12" for Zynq Ultrascale+ MPSoC.
 - reg: Should contain UART controller registers location and length.
 - interrupts: Should contain UART controller interrupts.
 - clocks: Must contain phandles to the UART clocks

Documentation/devicetree/bindings/serial/renesas,sci-serial.txt

@@ -9,6 +9,14 @@ Required properties:
     - "renesas,scifb-r8a73a4" for R8A73A4 (R-Mobile APE6) SCIFB compatible UART.
     - "renesas,scifa-r8a7740" for R8A7740 (R-Mobile A1) SCIFA compatible UART.
     - "renesas,scifb-r8a7740" for R8A7740 (R-Mobile A1) SCIFB compatible UART.
+    - "renesas,scif-r8a7743" for R8A7743 (RZ/G1M) SCIF compatible UART.
+    - "renesas,scifa-r8a7743" for R8A7743 (RZ/G1M) SCIFA compatible UART.
+    - "renesas,scifb-r8a7743" for R8A7743 (RZ/G1M) SCIFB compatible UART.
+    - "renesas,hscif-r8a7743" for R8A7743 (RZ/G1M) HSCIF compatible UART.
+    - "renesas,scif-r8a7745" for R8A7745 (RZ/G1E) SCIF compatible UART.
+    - "renesas,scifa-r8a7745" for R8A7745 (RZ/G1E) SCIFA compatible UART.
+    - "renesas,scifb-r8a7745" for R8A7745 (RZ/G1E) SCIFB compatible UART.
+    - "renesas,hscif-r8a7745" for R8A7745 (RZ/G1E) HSCIF compatible UART.
     - "renesas,scif-r8a7778" for R8A7778 (R-Car M1) SCIF compatible UART.
     - "renesas,scif-r8a7779" for R8A7779 (R-Car H1) SCIF compatible UART.
     - "renesas,scif-r8a7790" for R8A7790 (R-Car H2) SCIF compatible UART.

Documentation/devicetree/bindings/sound/omap-abe-twl6040.txt

@@ -12,7 +12,7 @@ Required properties:
 
 Optional properties:
 - ti,dmic: phandle for the OMAP dmic node if the machine have it connected
-- ti,jack_detection: Need to be present if the board capable to detect jack
+- ti,jack-detection: Need to be present if the board capable to detect jack
   insertion, removal.
 
 Available audio endpoints for the audio-routing table:

Documentation/devicetree/bindings/timer/jcore,pit.txt

@@ -0,0 +1,24 @@
+J-Core Programmable Interval Timer and Clocksource
+
+Required properties:
+
+- compatible: Must be "jcore,pit".
+
+- reg: Memory region(s) for timer/clocksource registers. For SMP,
+  there should be one region per cpu, indexed by the sequential,
+  zero-based hardware cpu number.
+
+- interrupts: An interrupt to assign for the timer. The actual pit
+  core is integrated with the aic and allows the timer interrupt
+  assignment to be programmed by software, but this property is
+  required in order to reserve an interrupt number that doesn't
+  conflict with other devices.
+
+
+Example:
+
+timer@200 {
+	compatible = "jcore,pit";
+	reg = < 0x200 0x30 0x500 0x30 >;
+	interrupts = < 0x48 >;
+};

Documentation/devicetree/bindings/usb/dwc2.txt

@@ -28,10 +28,7 @@ Refer to phy/phy-bindings.txt for generic phy consumer properties
 - g-use-dma: enable dma usage in gadget driver.
 - g-rx-fifo-size: size of rx fifo size in gadget mode.
 - g-np-tx-fifo-size: size of non-periodic tx fifo size in gadget mode.
-
-Deprecated properties:
-- g-tx-fifo-size: size of periodic tx fifo per endpoint (except ep0)
-  in gadget mode.
+- g-tx-fifo-size: size of periodic tx fifo per endpoint (except ep0) in gadget mode.
 
 Example:
 

Documentation/filesystems/Locking

@@ -447,7 +447,6 @@ prototypes:
 	int (*flush) (struct file *);
 	int (*release) (struct inode *, struct file *);
 	int (*fsync) (struct file *, loff_t start, loff_t end, int datasync);
-	int (*aio_fsync) (struct kiocb *, int datasync);
 	int (*fasync) (int, struct file *, int);
 	int (*lock) (struct file *, int, struct file_lock *);
 	ssize_t (*readv) (struct file *, const struct iovec *, unsigned long,

Documentation/filesystems/proc.txt

@@ -395,32 +395,6 @@ is not associated with a file:
 
  or if empty, the mapping is anonymous.
 
-The /proc/PID/task/TID/maps is a view of the virtual memory from the viewpoint
-of the individual tasks of a process. In this file you will see a mapping marked
-as [stack] if that task sees it as a stack. Hence, for the example above, the
-task-level map, i.e. /proc/PID/task/TID/maps for thread 1001 will look like this:
-
-08048000-08049000 r-xp 00000000 03:00 8312       /opt/test
-08049000-0804a000 rw-p 00001000 03:00 8312       /opt/test
-0804a000-0806b000 rw-p 00000000 00:00 0          [heap]
-a7cb1000-a7cb2000 ---p 00000000 00:00 0
-a7cb2000-a7eb2000 rw-p 00000000 00:00 0
-a7eb2000-a7eb3000 ---p 00000000 00:00 0
-a7eb3000-a7ed5000 rw-p 00000000 00:00 0          [stack]
-a7ed5000-a8008000 r-xp 00000000 03:00 4222       /lib/libc.so.6
-a8008000-a800a000 r--p 00133000 03:00 4222       /lib/libc.so.6
-a800a000-a800b000 rw-p 00135000 03:00 4222       /lib/libc.so.6
-a800b000-a800e000 rw-p 00000000 00:00 0
-a800e000-a8022000 r-xp 00000000 03:00 14462      /lib/libpthread.so.0
-a8022000-a8023000 r--p 00013000 03:00 14462      /lib/libpthread.so.0
-a8023000-a8024000 rw-p 00014000 03:00 14462      /lib/libpthread.so.0
-a8024000-a8027000 rw-p 00000000 00:00 0
-a8027000-a8043000 r-xp 00000000 03:00 8317       /lib/ld-linux.so.2
-a8043000-a8044000 r--p 0001b000 03:00 8317       /lib/ld-linux.so.2
-a8044000-a8045000 rw-p 0001c000 03:00 8317       /lib/ld-linux.so.2
-aff35000-aff4a000 rw-p 00000000 00:00 0
-ffffe000-fffff000 r-xp 00000000 00:00 0          [vdso]
-
 The /proc/PID/smaps is an extension based on maps, showing the memory
 consumption for each of the process's mappings. For each of mappings there
 is a series of lines such as the following:

Documentation/filesystems/vfs.txt

@@ -828,7 +828,6 @@ struct file_operations {
 	int (*flush) (struct file *, fl_owner_t id);
 	int (*release) (struct inode *, struct file *);
 	int (*fsync) (struct file *, loff_t, loff_t, int datasync);
-	int (*aio_fsync) (struct kiocb *, int datasync);
 	int (*fasync) (int, struct file *, int);
 	int (*lock) (struct file *, int, struct file_lock *);
 	ssize_t (*sendpage) (struct file *, struct page *, int, size_t, loff_t *, int);

Documentation/gpio/board.txt

@@ -6,7 +6,7 @@ Note that it only applies to the new descriptor-based interface. For a
 description of the deprecated integer-based GPIO interface please refer to
 gpio-legacy.txt (actually, there is no real mapping possible with the old
 interface; you just fetch an integer from somewhere and request the
-corresponding GPIO.
+corresponding GPIO).
 
 All platforms can enable the GPIO library, but if the platform strictly
 requires GPIO functionality to be present, it needs to select GPIOLIB from its
@@ -162,6 +162,9 @@ The driver controlling "foo.0" will then be able to obtain its GPIOs as follows:
 
 Since the "led" GPIOs are mapped as active-high, this example will switch their
 signals to 1, i.e. enabling the LEDs. And for the "power" GPIO, which is mapped
-as active-low, its actual signal will be 0 after this code. Contrary to the legacy
-integer GPIO interface, the active-low property is handled during mapping and is
-thus transparent to GPIO consumers.
+as active-low, its actual signal will be 0 after this code. Contrary to the
+legacy integer GPIO interface, the active-low property is handled during
+mapping and is thus transparent to GPIO consumers.
+
+A set of functions such as gpiod_set_value() is available to work with
+the new descriptor-oriented interface.

Documentation/i2c/i2c-topology

@@ -326,7 +326,7 @@ Two parent-locked sibling muxes
 
 This is a good topology.
 
-                                   .--------.
+                                    .--------.
                    .----------.  .--| dev D1 |
                    |  parent- |--'  '--------'
                 .--|  locked  |     .--------.
@@ -350,7 +350,7 @@ Mux-locked and parent-locked sibling muxes
 
 This is a good topology.
 
-                                   .--------.
+                                    .--------.
                    .----------.  .--| dev D1 |
                    |   mux-   |--'  '--------'
                 .--|  locked  |     .--------.

Documentation/networking/dsa/dsa.txt

@@ -67,13 +67,14 @@ Note that DSA does not currently create network interfaces for the "cpu" and
 Switch tagging protocols
 ------------------------
 
-DSA currently supports 4 different tagging protocols, and a tag-less mode as
+DSA currently supports 5 different tagging protocols, and a tag-less mode as
 well. The different protocols are implemented in:
 
 net/dsa/tag_trailer.c: Marvell's 4 trailer tag mode (legacy)
 net/dsa/tag_dsa.c: Marvell's original DSA tag
 net/dsa/tag_edsa.c: Marvell's enhanced DSA tag
 net/dsa/tag_brcm.c: Broadcom's 4 bytes tag
+net/dsa/tag_qca.c: Qualcomm's 2 bytes tag
 
 The exact format of the tag protocol is vendor specific, but in general, they
 all contain something which:

Documentation/networking/netdev-FAQ.txt

@@ -29,8 +29,8 @@ A: There are always two trees (git repositories) in play.  Both are driven
    Linus, and net-next is where the new code goes for the future release.
    You can find the trees here:
 
-	http://git.kernel.org/?p=linux/kernel/git/davem/net.git
-	http://git.kernel.org/?p=linux/kernel/git/davem/net-next.git
+        https://git.kernel.org/pub/scm/linux/kernel/git/davem/net.git
+        https://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next.git
 
 Q: How often do changes from these trees make it to the mainline Linus tree?
 
@@ -76,7 +76,7 @@ Q: So where are we now in this cycle?
 
 A: Load the mainline (Linus) page here:
 
-	http://git.kernel.org/?p=linux/kernel/git/torvalds/linux.git
+	https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git
 
    and note the top of the "tags" section.  If it is rc1, it is early
    in the dev cycle.  If it was tagged rc7 a week ago, then a release
@@ -123,7 +123,7 @@ A: Normally Greg Kroah-Hartman collects stable commits himself, but
 
    It contains the patches which Dave has selected, but not yet handed
    off to Greg.  If Greg already has the patch, then it will be here:
-	http://git.kernel.org/cgit/linux/kernel/git/stable/stable-queue.git
+	https://git.kernel.org/pub/scm/linux/kernel/git/stable/stable-queue.git
 
    A quick way to find whether the patch is in this stable-queue is
    to simply clone the repo, and then git grep the mainline commit ID, e.g.

Documentation/networking/nf_conntrack-sysctl.txt

@@ -33,24 +33,6 @@ nf_conntrack_events - BOOLEAN
 	If this option is enabled, the connection tracking code will
 	provide userspace with connection tracking events via ctnetlink.
 
-nf_conntrack_events_retry_timeout - INTEGER (seconds)
-	default 15
-
-	This option is only relevant when "reliable connection tracking
-	events" are used.  Normally, ctnetlink is "lossy", that is,
-	events are normally dropped when userspace listeners can't keep up.
-
-	Userspace can request "reliable event mode".  When this mode is
-	active, the conntrack will only be destroyed after the event was
-	delivered.  If event delivery fails, the kernel periodically
-	re-tries to send the event to userspace.
-
-	This is the maximum interval the kernel should use when re-trying
-	to deliver the destroy event.
-
-	A higher number means there will be fewer delivery retries and it
-	will take longer for a backlog to be processed.
-
 nf_conntrack_expect_max - INTEGER
 	Maximum size of expectation table.  Default value is
 	nf_conntrack_buckets / 256. Minimum is 1.

Documentation/virtual/kvm/api.txt

@@ -777,6 +777,17 @@ Gets the current timestamp of kvmclock as seen by the current guest. In
 conjunction with KVM_SET_CLOCK, it is used to ensure monotonicity on scenarios
 such as migration.
 
+When KVM_CAP_ADJUST_CLOCK is passed to KVM_CHECK_EXTENSION, it returns the
+set of bits that KVM can return in struct kvm_clock_data's flag member.
+
+The only flag defined now is KVM_CLOCK_TSC_STABLE.  If set, the returned
+value is the exact kvmclock value seen by all VCPUs at the instant
+when KVM_GET_CLOCK was called.  If clear, the returned value is simply
+CLOCK_MONOTONIC plus a constant offset; the offset can be modified
+with KVM_SET_CLOCK.  KVM will try to make all VCPUs follow this clock,
+but the exact value read by each VCPU could differ, because the host
+TSC is not stable.
+
 struct kvm_clock_data {
 	__u64 clock;  /* kvmclock current value */
 	__u32 flags;

Documentation/virtual/kvm/locking.txt

@@ -4,7 +4,17 @@ KVM Lock Overview
 1. Acquisition Orders
 ---------------------
 
-(to be written)
+The acquisition orders for mutexes are as follows:
+
+- kvm->lock is taken outside vcpu->mutex
+
+- kvm->lock is taken outside kvm->slots_lock and kvm->irq_lock
+
+- kvm->slots_lock is taken outside kvm->irq_lock, though acquiring
+  them together is quite rare.
+
+For spinlocks, kvm_lock is taken outside kvm->mmu_lock.  Everything
+else is a leaf: no other lock is taken inside the critical sections.
 
 2: Exception
 ------------

MAINTAINERS

@@ -1442,6 +1442,7 @@ F:	drivers/cpufreq/mvebu-cpufreq.c
 F:	arch/arm/configs/mvebu_*_defconfig
 
 ARM/Marvell Berlin SoC support
+M:	Jisheng Zhang <jszhang@marvell.com>
 M:	Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
 L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
 S:	Maintained
@@ -2551,15 +2552,18 @@ S:	Supported
 F:	drivers/net/ethernet/broadcom/genet/
 
 BROADCOM BNX2 GIGABIT ETHERNET DRIVER
-M:	Sony Chacko <sony.chacko@qlogic.com>
-M:	Dept-HSGLinuxNICDev@qlogic.com
+M:	Rasesh Mody <rasesh.mody@cavium.com>
+M:	Harish Patil <harish.patil@cavium.com>
+M:	Dept-GELinuxNICDev@cavium.com
 L:	netdev@vger.kernel.org
 S:	Supported
 F:	drivers/net/ethernet/broadcom/bnx2.*
 F:	drivers/net/ethernet/broadcom/bnx2_*
 
 BROADCOM BNX2X 10 GIGABIT ETHERNET DRIVER
-M:	Ariel Elior <ariel.elior@qlogic.com>
+M:	Yuval Mintz <Yuval.Mintz@cavium.com>
+M:	Ariel Elior <ariel.elior@cavium.com>
+M:	everest-linux-l2@cavium.com
 L:	netdev@vger.kernel.org
 S:	Supported
 F:	drivers/net/ethernet/broadcom/bnx2x/
@@ -2766,7 +2770,9 @@ S:	Supported
 F:	drivers/scsi/bfa/
 
 BROCADE BNA 10 GIGABIT ETHERNET DRIVER
-M:	Rasesh Mody <rasesh.mody@qlogic.com>
+M:	Rasesh Mody <rasesh.mody@cavium.com>
+M:	Sudarsana Kalluru <sudarsana.kalluru@cavium.com>
+M:	Dept-GELinuxNICDev@cavium.com
 L:	netdev@vger.kernel.org
 S:	Supported
 F:	drivers/net/ethernet/brocade/bna/
@@ -4620,8 +4626,9 @@ F:	sound/usb/misc/ua101.c
 
 EXTENSIBLE FIRMWARE INTERFACE (EFI)
 M:	Matt Fleming <matt@codeblueprint.co.uk>
+M:	Ard Biesheuvel <ard.biesheuvel@linaro.org>
 L:	linux-efi@vger.kernel.org
-T:	git git://git.kernel.org/pub/scm/linux/kernel/git/mfleming/efi.git
+T:	git git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi.git
 S:	Maintained
 F:	Documentation/efi-stub.txt
 F:	arch/ia64/kernel/efi.c
@@ -5286,6 +5293,12 @@ M:	Joe Perches <joe@perches.com>
 S:	Maintained
 F:	scripts/get_maintainer.pl
 
+GENWQE (IBM Generic Workqueue Card)
+M:	Frank Haverkamp <haver@linux.vnet.ibm.com>
+M:	Gabriel Krisman Bertazi <krisman@linux.vnet.ibm.com>
+S:	Supported
+F:	drivers/misc/genwqe/
+
 GFS2 FILE SYSTEM
 M:	Steven Whitehouse <swhiteho@redhat.com>
 M:	Bob Peterson <rpeterso@redhat.com>
@@ -7071,6 +7084,7 @@ F:	drivers/scsi/53c700*
 LED SUBSYSTEM
 M:	Richard Purdie <rpurdie@rpsys.net>
 M:	Jacek Anaszewski <j.anaszewski@samsung.com>
+M:	Pavel Machek <pavel@ucw.cz>
 L:	linux-leds@vger.kernel.org
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/j.anaszewski/linux-leds.git
 S:	Maintained
@@ -7912,6 +7926,10 @@ F:	mm/
 MEMORY TECHNOLOGY DEVICES (MTD)
 M:	David Woodhouse <dwmw2@infradead.org>
 M:	Brian Norris <computersforpeace@gmail.com>
+M:	Boris Brezillon <boris.brezillon@free-electrons.com>
+M:	Marek Vasut <marek.vasut@gmail.com>
+M:	Richard Weinberger <richard@nod.at>
+M:	Cyrille Pitchen <cyrille.pitchen@atmel.com>
 L:	linux-mtd@lists.infradead.org
 W:	http://www.linux-mtd.infradead.org/
 Q:	http://patchwork.ozlabs.org/project/linux-mtd/list/
@@ -8040,6 +8058,7 @@ F:	drivers/infiniband/hw/mlx4/
 F:	include/linux/mlx4/
 
 MELLANOX MLX5 core VPI driver
+M:	Saeed Mahameed <saeedm@mellanox.com>
 M:	Matan Barak <matanb@mellanox.com>
 M:	Leon Romanovsky <leonro@mellanox.com>
 L:	netdev@vger.kernel.org
@@ -8099,6 +8118,7 @@ S:	Maintained
 F:	drivers/media/dvb-frontends/mn88473*
 
 MODULE SUPPORT
+M:	Jessica Yu <jeyu@redhat.com>
 M:	Rusty Russell <rusty@rustcorp.com.au>
 S:	Maintained
 F:	include/linux/module.h
@@ -8212,7 +8232,7 @@ F:	include/linux/mfd/
 MULTIMEDIA CARD (MMC), SECURE DIGITAL (SD) AND SDIO SUBSYSTEM
 M:	Ulf Hansson <ulf.hansson@linaro.org>
 L:	linux-mmc@vger.kernel.org
-T:	git git://git.linaro.org/people/ulf.hansson/mmc.git
+T:	git git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc.git
 S:	Maintained
 F:	Documentation/devicetree/bindings/mmc/
 F:	drivers/mmc/
@@ -8508,11 +8528,10 @@ F:	Documentation/devicetree/bindings/net/wireless/
 F:	drivers/net/wireless/
 
 NETXEN (1/10) GbE SUPPORT
-M:	Manish Chopra <manish.chopra@qlogic.com>
-M:	Sony Chacko <sony.chacko@qlogic.com>
-M:	Rajesh Borundia <rajesh.borundia@qlogic.com>
+M:	Manish Chopra <manish.chopra@cavium.com>
+M:	Rahul Verma <rahul.verma@cavium.com>
+M:	Dept-GELinuxNICDev@cavium.com
 L:	netdev@vger.kernel.org
-W:	http://www.qlogic.com
 S:	Supported
 F:	drivers/net/ethernet/qlogic/netxen/
 
@@ -9299,7 +9318,7 @@ S:	Maintained
 F:	drivers/pci/host/*designware*
 
 PCI DRIVER FOR SYNOPSYS PROTOTYPING DEVICE
-M:	Joao Pinto <jpinto@synopsys.com>
+M:	Jose Abreu <Jose.Abreu@synopsys.com>
 L:	linux-pci@vger.kernel.org
 S:	Maintained
 F:	Documentation/devicetree/bindings/pci/designware-pcie.txt
@@ -9318,7 +9337,7 @@ PCI DRIVER FOR INTEL VOLUME MANAGEMENT DEVICE (VMD)
 M:	Keith Busch <keith.busch@intel.com>
 L:	linux-pci@vger.kernel.org
 S:	Supported
-F:	arch/x86/pci/vmd.c
+F:	drivers/pci/host/vmd.c
 
 PCIE DRIVER FOR ST SPEAR13XX
 M:	Pratyush Anand <pratyush.anand@gmail.com>
@@ -9888,33 +9907,32 @@ F:	Documentation/scsi/LICENSE.qla4xxx
 F:	drivers/scsi/qla4xxx/
 
 QLOGIC QLA3XXX NETWORK DRIVER
-M:	Jitendra Kalsaria <jitendra.kalsaria@qlogic.com>
-M:	Ron Mercer <ron.mercer@qlogic.com>
-M:	linux-driver@qlogic.com
+M:	Dept-GELinuxNICDev@cavium.com
 L:	netdev@vger.kernel.org
 S:	Supported
 F:	Documentation/networking/LICENSE.qla3xxx
 F:	drivers/net/ethernet/qlogic/qla3xxx.*
 
 QLOGIC QLCNIC (1/10)Gb ETHERNET DRIVER
-M:	Dept-GELinuxNICDev@qlogic.com
+M:	Harish Patil <harish.patil@cavium.com>
+M:	Manish Chopra <manish.chopra@cavium.com>
+M:	Dept-GELinuxNICDev@cavium.com
 L:	netdev@vger.kernel.org
 S:	Supported
 F:	drivers/net/ethernet/qlogic/qlcnic/
 
 QLOGIC QLGE 10Gb ETHERNET DRIVER
-M:	Harish Patil <harish.patil@qlogic.com>
-M:	Sudarsana Kalluru <sudarsana.kalluru@qlogic.com>
-M:	Dept-GELinuxNICDev@qlogic.com
-M:	linux-driver@qlogic.com
+M:	Harish Patil <harish.patil@cavium.com>
+M:	Manish Chopra <manish.chopra@cavium.com>
+M:	Dept-GELinuxNICDev@cavium.com
 L:	netdev@vger.kernel.org
 S:	Supported
 F:	drivers/net/ethernet/qlogic/qlge/
 
 QLOGIC QL4xxx ETHERNET DRIVER
-M:	Yuval Mintz <Yuval.Mintz@qlogic.com>
-M:	Ariel Elior <Ariel.Elior@qlogic.com>
-M:	everest-linux-l2@qlogic.com
+M:	Yuval Mintz <Yuval.Mintz@cavium.com>
+M:	Ariel Elior <Ariel.Elior@cavium.com>
+M:	everest-linux-l2@cavium.com
 L:	netdev@vger.kernel.org
 S:	Supported
 F:	drivers/net/ethernet/qlogic/qed/
@@ -11392,6 +11410,17 @@ W:	http://www.st.com/spear
 S:	Maintained
 F:	drivers/clk/spear/
 
+SPI NOR SUBSYSTEM
+M:	Cyrille Pitchen <cyrille.pitchen@atmel.com>
+M:	Marek Vasut <marek.vasut@gmail.com>
+L:	linux-mtd@lists.infradead.org
+W:	http://www.linux-mtd.infradead.org/
+Q:	http://patchwork.ozlabs.org/project/linux-mtd/list/
+T:	git git://github.com/spi-nor/linux.git
+S:	Maintained
+F:	drivers/mtd/spi-nor/
+F:	include/linux/mtd/spi-nor.h
+
 SPI SUBSYSTEM
 M:	Mark Brown <broonie@kernel.org>
 L:	linux-spi@vger.kernel.org
@@ -12771,6 +12800,7 @@ F:	include/uapi/linux/virtio_console.h
 
 VIRTIO CORE, NET AND BLOCK DRIVERS
 M:	"Michael S. Tsirkin" <mst@redhat.com>
+M:	Jason Wang <jasowang@redhat.com>
 L:	virtualization@lists.linux-foundation.org
 S:	Maintained
 F:	Documentation/devicetree/bindings/virtio/
@@ -12801,6 +12831,7 @@ F:	include/uapi/linux/virtio_gpu.h
 
 VIRTIO HOST (VHOST)
 M:	"Michael S. Tsirkin" <mst@redhat.com>
+M:	Jason Wang <jasowang@redhat.com>
 L:	kvm@vger.kernel.org
 L:	virtualization@lists.linux-foundation.org
 L:	netdev@vger.kernel.org

Makefile

@@ -1,7 +1,7 @@
 VERSION = 4
 PATCHLEVEL = 9
 SUBLEVEL = 0
-EXTRAVERSION = -rc1
+EXTRAVERSION = -rc6
 NAME = Psychotic Stoned Sheep
 
 # *DOCUMENTATION*
@@ -370,7 +370,7 @@ LDFLAGS_MODULE  =
 CFLAGS_KERNEL	=
 AFLAGS_KERNEL	=
 LDFLAGS_vmlinux =
-CFLAGS_GCOV	= -fprofile-arcs -ftest-coverage -fno-tree-loop-im
+CFLAGS_GCOV	= -fprofile-arcs -ftest-coverage -fno-tree-loop-im -Wno-maybe-uninitialized
 CFLAGS_KCOV	:= $(call cc-option,-fsanitize-coverage=trace-pc,)
 
 
@@ -399,11 +399,12 @@ KBUILD_CFLAGS   := -Wall -Wundef -Wstrict-prototypes -Wno-trigraphs \
 		   -fno-strict-aliasing -fno-common \
 		   -Werror-implicit-function-declaration \
 		   -Wno-format-security \
-		   -std=gnu89
+		   -std=gnu89 $(call cc-option,-fno-PIE)
+
 
 KBUILD_AFLAGS_KERNEL :=
 KBUILD_CFLAGS_KERNEL :=
-KBUILD_AFLAGS   := -D__ASSEMBLY__
+KBUILD_AFLAGS   := -D__ASSEMBLY__ $(call cc-option,-fno-PIE)
 KBUILD_AFLAGS_MODULE  := -DMODULE
 KBUILD_CFLAGS_MODULE  := -DMODULE
 KBUILD_LDFLAGS_MODULE := -T $(srctree)/scripts/module-common.lds
@@ -620,7 +621,6 @@ ARCH_CFLAGS :=
 include arch/$(SRCARCH)/Makefile
 
 KBUILD_CFLAGS	+= $(call cc-option,-fno-delete-null-pointer-checks,)
-KBUILD_CFLAGS	+= $(call cc-disable-warning,maybe-uninitialized,)
 KBUILD_CFLAGS	+= $(call cc-disable-warning,frame-address,)
 
 ifdef CONFIG_LD_DEAD_CODE_DATA_ELIMINATION
@@ -629,15 +629,18 @@ KBUILD_CFLAGS	+= $(call cc-option,-fdata-sections,)
 endif
 
 ifdef CONFIG_CC_OPTIMIZE_FOR_SIZE
-KBUILD_CFLAGS	+= -Os
+KBUILD_CFLAGS	+= -Os $(call cc-disable-warning,maybe-uninitialized,)
 else
 ifdef CONFIG_PROFILE_ALL_BRANCHES
-KBUILD_CFLAGS	+= -O2
+KBUILD_CFLAGS	+= -O2 $(call cc-disable-warning,maybe-uninitialized,)
 else
 KBUILD_CFLAGS   += -O2
 endif
 endif
 
+KBUILD_CFLAGS += $(call cc-ifversion, -lt, 0409, \
+			$(call cc-disable-warning,maybe-uninitialized,))
+
 # Tell gcc to never replace conditional load with a non-conditional one
 KBUILD_CFLAGS	+= $(call cc-option,--param=allow-store-data-races=0)
 

arch/alpha/kernel/ptrace.c

@@ -157,14 +157,16 @@ put_reg(struct task_struct *task, unsigned long regno, unsigned long data)
 static inline int
 read_int(struct task_struct *task, unsigned long addr, int * data)
 {
-	int copied = access_process_vm(task, addr, data, sizeof(int), 0);
+	int copied = access_process_vm(task, addr, data, sizeof(int),
+			FOLL_FORCE);
 	return (copied == sizeof(int)) ? 0 : -EIO;
 }
 
 static inline int
 write_int(struct task_struct *task, unsigned long addr, int data)
 {
-	int copied = access_process_vm(task, addr, &data, sizeof(int), 1);
+	int copied = access_process_vm(task, addr, &data, sizeof(int),
+			FOLL_FORCE | FOLL_WRITE);
 	return (copied == sizeof(int)) ? 0 : -EIO;
 }
 
@@ -281,7 +283,8 @@ long arch_ptrace(struct task_struct *child, long request,
 	/* When I and D space are separate, these will need to be fixed.  */
 	case PTRACE_PEEKTEXT: /* read word at location addr. */
 	case PTRACE_PEEKDATA:
-		copied = access_process_vm(child, addr, &tmp, sizeof(tmp), 0);
+		copied = access_process_vm(child, addr, &tmp, sizeof(tmp),
+				FOLL_FORCE);
 		ret = -EIO;
 		if (copied != sizeof(tmp))
 			break;

arch/arc/Kconfig

@@ -41,6 +41,8 @@ config ARC
 	select PERF_USE_VMALLOC
 	select HAVE_DEBUG_STACKOVERFLOW
 	select HAVE_GENERIC_DMA_COHERENT
+	select HAVE_KERNEL_GZIP
+	select HAVE_KERNEL_LZMA
 
 config MIGHT_HAVE_PCI
 	bool
@@ -186,14 +188,6 @@ if SMP
 config ARC_HAS_COH_CACHES
 	def_bool n
 
-config ARC_MCIP
-	bool "ARConnect Multicore IP (MCIP) Support "
-	depends on ISA_ARCV2
-	help
-	  This IP block enables SMP in ARC-HS38 cores.
-	  It provides for cross-core interrupts, multi-core debug
-	  hardware semaphores, shared memory,....
-
 config NR_CPUS
 	int "Maximum number of CPUs (2-4096)"
 	range 2 4096
@@ -211,6 +205,15 @@ config ARC_SMP_HALT_ON_RESET
 
 endif	#SMP
 
+config ARC_MCIP
+	bool "ARConnect Multicore IP (MCIP) Support "
+	depends on ISA_ARCV2
+	default y if SMP
+	help
+	  This IP block enables SMP in ARC-HS38 cores.
+	  It provides for cross-core interrupts, multi-core debug
+	  hardware semaphores, shared memory,....
+
 menuconfig ARC_CACHE
 	bool "Enable Cache Support"
 	default y
@@ -537,14 +540,6 @@ config ARC_DBG_TLB_PARANOIA
 	bool "Paranoia Checks in Low Level TLB Handlers"
 	default n
 
-config ARC_DBG_TLB_MISS_COUNT
-	bool "Profile TLB Misses"
-	default n
-	select DEBUG_FS
-	help
-	  Counts number of I and D TLB Misses and exports them via Debugfs
-	  The counters can be cleared via Debugfs as well
-
 endif
 
 config ARC_UBOOT_SUPPORT

arch/arc/Makefile

@@ -71,7 +71,9 @@ cflags-$(CONFIG_ARC_DW2_UNWIND)		+= -fasynchronous-unwind-tables $(cfi)
 ifndef CONFIG_CC_OPTIMIZE_FOR_SIZE
 # Generic build system uses -O2, we want -O3
 # Note: No need to add to cflags-y as that happens anyways
-ARCH_CFLAGS += -O3
+#
+# Disable the false maybe-uninitialized warings gcc spits out at -O3
+ARCH_CFLAGS += -O3 $(call cc-disable-warning,maybe-uninitialized,)
 endif
 
 # small data is default for elf32 tool-chain. If not usable, disable it

arch/arc/boot/Makefile

@@ -14,9 +14,15 @@ UIMAGE_ENTRYADDR   = $(LINUX_START_TEXT)
 
 suffix-y := bin
 suffix-$(CONFIG_KERNEL_GZIP)	:= gz
+suffix-$(CONFIG_KERNEL_LZMA)	:= lzma
 
-targets += uImage uImage.bin uImage.gz
-extra-y += vmlinux.bin vmlinux.bin.gz
+targets += uImage
+targets += uImage.bin
+targets += uImage.gz
+targets += uImage.lzma
+extra-y += vmlinux.bin
+extra-y += vmlinux.bin.gz
+extra-y += vmlinux.bin.lzma
 
 $(obj)/vmlinux.bin: vmlinux FORCE
 	$(call if_changed,objcopy)
@@ -24,12 +30,18 @@ $(obj)/vmlinux.bin: vmlinux FORCE
 $(obj)/vmlinux.bin.gz: $(obj)/vmlinux.bin FORCE
 	$(call if_changed,gzip)
 
+$(obj)/vmlinux.bin.lzma: $(obj)/vmlinux.bin FORCE
+	$(call if_changed,lzma)
+
 $(obj)/uImage.bin: $(obj)/vmlinux.bin FORCE
 	$(call if_changed,uimage,none)
 
 $(obj)/uImage.gz: $(obj)/vmlinux.bin.gz FORCE
 	$(call if_changed,uimage,gzip)
 
+$(obj)/uImage.lzma: $(obj)/vmlinux.bin.lzma FORCE
+	$(call if_changed,uimage,lzma)
+
 $(obj)/uImage: $(obj)/uImage.$(suffix-y)
 	@ln -sf $(notdir $<) $@
 	@echo '  Image $@ is ready'

arch/arc/boot/dts/axc001.dtsi

@@ -71,7 +71,7 @@
 			reg-io-width = <4>;
 		};
 
-		arcpmu0: pmu {
+		arcpct0: pct {
 			compatible = "snps,arc700-pct";
 		};
 	};

arch/arc/boot/dts/nsim_700.dts

@@ -69,7 +69,7 @@
 			};
 		};
 
-		arcpmu0: pmu {
+		arcpct0: pct {
 			compatible = "snps,arc700-pct";
 		};
 	};

arch/arc/boot/dts/nsimosci.dts

@@ -83,5 +83,9 @@
 			reg = <0xf0003000 0x44>;
 			interrupts = <7>;
 		};
+
+		arcpct0: pct {
+			compatible = "snps,arc700-pct";
+		};
 	};
 };

arch/arc/configs/nsim_700_defconfig

@@ -14,6 +14,7 @@ CONFIG_BLK_DEV_INITRD=y
 CONFIG_INITRAMFS_SOURCE="../arc_initramfs/"
 CONFIG_KALLSYMS_ALL=y
 CONFIG_EMBEDDED=y
+CONFIG_PERF_EVENTS=y
 # CONFIG_SLUB_DEBUG is not set
 # CONFIG_COMPAT_BRK is not set
 CONFIG_KPROBES=y

arch/arc/configs/nsim_hs_defconfig

@@ -14,6 +14,7 @@ CONFIG_BLK_DEV_INITRD=y
 CONFIG_INITRAMFS_SOURCE="../../arc_initramfs_hs/"
 CONFIG_KALLSYMS_ALL=y
 CONFIG_EMBEDDED=y
+CONFIG_PERF_EVENTS=y
 # CONFIG_SLUB_DEBUG is not set
 # CONFIG_COMPAT_BRK is not set
 CONFIG_KPROBES=y

arch/arc/configs/nsim_hs_smp_defconfig

@@ -12,6 +12,7 @@ CONFIG_BLK_DEV_INITRD=y
 CONFIG_INITRAMFS_SOURCE="../arc_initramfs_hs/"
 CONFIG_KALLSYMS_ALL=y
 CONFIG_EMBEDDED=y
+CONFIG_PERF_EVENTS=y
 # CONFIG_SLUB_DEBUG is not set
 # CONFIG_COMPAT_BRK is not set
 CONFIG_KPROBES=y

arch/arc/configs/nsimosci_defconfig

@@ -14,6 +14,7 @@ CONFIG_BLK_DEV_INITRD=y
 CONFIG_INITRAMFS_SOURCE="../arc_initramfs/"
 CONFIG_KALLSYMS_ALL=y
 CONFIG_EMBEDDED=y
+CONFIG_PERF_EVENTS=y
 # CONFIG_SLUB_DEBUG is not set
 # CONFIG_COMPAT_BRK is not set
 CONFIG_KPROBES=y

arch/arc/configs/nsimosci_hs_defconfig

@@ -14,6 +14,7 @@ CONFIG_BLK_DEV_INITRD=y
 CONFIG_INITRAMFS_SOURCE="../arc_initramfs_hs/"
 CONFIG_KALLSYMS_ALL=y
 CONFIG_EMBEDDED=y
+CONFIG_PERF_EVENTS=y
 # CONFIG_SLUB_DEBUG is not set
 # CONFIG_COMPAT_BRK is not set
 CONFIG_KPROBES=y

arch/arc/configs/nsimosci_hs_smp_defconfig

@@ -10,6 +10,7 @@ CONFIG_IKCONFIG_PROC=y
 # CONFIG_PID_NS is not set
 CONFIG_BLK_DEV_INITRD=y
 CONFIG_INITRAMFS_SOURCE="../arc_initramfs_hs/"
+CONFIG_PERF_EVENTS=y
 # CONFIG_COMPAT_BRK is not set
 CONFIG_KPROBES=y
 CONFIG_MODULES=y
@@ -34,7 +35,6 @@ CONFIG_INET=y
 # CONFIG_INET_XFRM_MODE_TRANSPORT is not set
 # CONFIG_INET_XFRM_MODE_TUNNEL is not set
 # CONFIG_INET_XFRM_MODE_BEET is not set
-# CONFIG_INET_LRO is not set
 # CONFIG_IPV6 is not set
 # CONFIG_WIRELESS is not set
 CONFIG_DEVTMPFS=y
@@ -72,7 +72,6 @@ CONFIG_SERIAL_OF_PLATFORM=y
 # CONFIG_HWMON is not set
 CONFIG_DRM=y
 CONFIG_DRM_ARCPGU=y
-CONFIG_FRAMEBUFFER_CONSOLE=y
 CONFIG_LOGO=y
 # CONFIG_HID is not set
 # CONFIG_USB_SUPPORT is not set

arch/arc/include/asm/arcregs.h

@@ -43,12 +43,14 @@
 #define STATUS_AE_BIT		5	/* Exception active */
 #define STATUS_DE_BIT		6	/* PC is in delay slot */
 #define STATUS_U_BIT		7	/* User/Kernel mode */
+#define STATUS_Z_BIT            11
 #define STATUS_L_BIT		12	/* Loop inhibit */
 
 /* These masks correspond to the status word(STATUS_32) bits */
 #define STATUS_AE_MASK		(1<<STATUS_AE_BIT)
 #define STATUS_DE_MASK		(1<<STATUS_DE_BIT)
 #define STATUS_U_MASK		(1<<STATUS_U_BIT)
+#define STATUS_Z_MASK		(1<<STATUS_Z_BIT)
 #define STATUS_L_MASK		(1<<STATUS_L_BIT)
 
 /*
@@ -349,10 +351,11 @@ struct cpuinfo_arc {
 	struct cpuinfo_arc_bpu bpu;
 	struct bcr_identity core;
 	struct bcr_isa isa;
+	const char *details, *name;
 	unsigned int vec_base;
 	struct cpuinfo_arc_ccm iccm, dccm;
 	struct {
-		unsigned int swap:1, norm:1, minmax:1, barrel:1, crc:1, pad1:3,
+		unsigned int swap:1, norm:1, minmax:1, barrel:1, crc:1, swape:1, pad1:2,
 			     fpu_sp:1, fpu_dp:1, pad2:6,
 			     debug:1, ap:1, smart:1, rtt:1, pad3:4,
 			     timer0:1, timer1:1, rtc:1, gfrc:1, pad4:4;

arch/arc/include/asm/cache.h

@@ -53,7 +53,7 @@ extern void arc_cache_init(void);
 extern char *arc_cache_mumbojumbo(int cpu_id, char *buf, int len);
 extern void read_decode_cache_bcr(void);
 
-extern int ioc_exists;
+extern int ioc_enable;
 extern unsigned long perip_base, perip_end;
 
 #endif	/* !__ASSEMBLY__ */

arch/arc/include/asm/elf.h

@@ -54,7 +54,7 @@ extern int elf_check_arch(const struct elf32_hdr *);
  * the loader.  We need to make sure that it is out of the way of the program
  * that it will "exec", and that there is sufficient room for the brk.
  */
-#define ELF_ET_DYN_BASE		(2 * TASK_SIZE / 3)
+#define ELF_ET_DYN_BASE		(2UL * TASK_SIZE / 3)
 
 /*
  * When the program starts, a1 contains a pointer to a function to be

arch/arc/include/asm/mcip.h

@@ -55,6 +55,22 @@ struct mcip_cmd {
 #define IDU_M_DISTRI_DEST		0x2
 };
 
+struct mcip_bcr {
+#ifdef CONFIG_CPU_BIG_ENDIAN
+		unsigned int pad3:8,
+			     idu:1, llm:1, num_cores:6,
+			     iocoh:1,  gfrc:1, dbg:1, pad2:1,
+			     msg:1, sem:1, ipi:1, pad:1,
+			     ver:8;
+#else
+		unsigned int ver:8,
+			     pad:1, ipi:1, sem:1, msg:1,
+			     pad2:1, dbg:1, gfrc:1, iocoh:1,
+			     num_cores:6, llm:1, idu:1,
+			     pad3:8;
+#endif
+};
+
 /*
  * MCIP programming model
  *

arch/arc/include/asm/module.h

@@ -18,6 +18,7 @@
 struct mod_arch_specific {
 	void *unw_info;
 	int unw_sec_idx;
+	const char *secstr;
 };
 #endif
 

arch/arc/include/asm/setup.h

@@ -27,11 +27,6 @@ struct id_to_str {
 	const char *str;
 };
 
-struct cpuinfo_data {
-	struct id_to_str info;
-	int up_range;
-};
-
 extern int root_mountflags, end_mem;
 
 void setup_processor(void);
@@ -43,5 +38,6 @@ void __init setup_arch_memory(void);
 #define IS_USED_RUN(v)		((v) ? "" : "(not used) ")
 #define IS_USED_CFG(cfg)	IS_USED_RUN(IS_ENABLED(cfg))
 #define IS_AVAIL2(v, s, cfg)	IS_AVAIL1(v, s), IS_AVAIL1(v, IS_USED_CFG(cfg))
+#define IS_AVAIL3(v, v2, s)	IS_AVAIL1(v, s), IS_AVAIL1(v, IS_DISABLED_RUN(v2))
 
 #endif /* __ASMARC_SETUP_H */

arch/arc/include/asm/smp.h

@@ -37,9 +37,9 @@ extern const char *arc_platform_smp_cpuinfo(void);
  * API expected BY platform smp code (FROM arch smp code)
  *
  * smp_ipi_irq_setup:
- *	Takes @cpu and @irq to which the arch-common ISR is hooked up
+ *	Takes @cpu and @hwirq to which the arch-common ISR is hooked up
  */
-extern int smp_ipi_irq_setup(int cpu, int irq);
+extern int smp_ipi_irq_setup(int cpu, irq_hw_number_t hwirq);
 
 /*
  * struct plat_smp_ops	- SMP callbacks provided by platform to ARC SMP

arch/arc/include/asm/syscalls.h

@@ -17,6 +17,7 @@ int sys_clone_wrapper(int, int, int, int, int);
 int sys_cacheflush(uint32_t, uint32_t uint32_t);
 int sys_arc_settls(void *);
 int sys_arc_gettls(void);
+int sys_arc_usr_cmpxchg(int *, int, int);
 
 #include <asm-generic/syscalls.h>
 

arch/arc/include/uapi/asm/unistd.h

@@ -27,18 +27,19 @@
 
 #define NR_syscalls	__NR_syscalls
 
+/* Generic syscall (fs/filesystems.c - lost in asm-generic/unistd.h */
+#define __NR_sysfs		(__NR_arch_specific_syscall + 3)
+
 /* ARC specific syscall */
 #define __NR_cacheflush		(__NR_arch_specific_syscall + 0)
 #define __NR_arc_settls		(__NR_arch_specific_syscall + 1)
 #define __NR_arc_gettls		(__NR_arch_specific_syscall + 2)
+#define __NR_arc_usr_cmpxchg	(__NR_arch_specific_syscall + 4)
 
 __SYSCALL(__NR_cacheflush, sys_cacheflush)
 __SYSCALL(__NR_arc_settls, sys_arc_settls)
 __SYSCALL(__NR_arc_gettls, sys_arc_gettls)
-
-
-/* Generic syscall (fs/filesystems.c - lost in asm-generic/unistd.h */
-#define __NR_sysfs		(__NR_arch_specific_syscall + 3)
+__SYSCALL(__NR_arc_usr_cmpxchg, sys_arc_usr_cmpxchg)
 __SYSCALL(__NR_sysfs, sys_sysfs)
 
 #undef __SYSCALL

arch/arc/kernel/devtree.c

@@ -31,6 +31,8 @@ static void __init arc_set_early_base_baud(unsigned long dt_root)
 		arc_base_baud = 166666666;	/* Fixed 166.6MHz clk (TB10x) */
 	else if (of_flat_dt_is_compatible(dt_root, "snps,arc-sdp"))
 		arc_base_baud = 33333333;	/* Fixed 33MHz clk (AXS10x) */
+	else if (of_flat_dt_is_compatible(dt_root, "ezchip,arc-nps"))
+		arc_base_baud = 800000000;      /* Fixed 800MHz clk (NPS) */
 	else
 		arc_base_baud = 50000000;	/* Fixed default 50MHz */
 }

arch/arc/kernel/mcip.c

@@ -15,11 +15,12 @@
 #include <asm/mcip.h>
 #include <asm/setup.h>
 
-static char smp_cpuinfo_buf[128];
-static int idu_detected;
-
 static DEFINE_RAW_SPINLOCK(mcip_lock);
 
+#ifdef CONFIG_SMP
+
+static char smp_cpuinfo_buf[128];
+
 static void mcip_setup_per_cpu(int cpu)
 {
 	smp_ipi_irq_setup(cpu, IPI_IRQ);
@@ -86,21 +87,7 @@ static void mcip_ipi_clear(int irq)
 
 static void mcip_probe_n_setup(void)
 {
-	struct mcip_bcr {
-#ifdef CONFIG_CPU_BIG_ENDIAN
-		unsigned int pad3:8,
-			     idu:1, llm:1, num_cores:6,
-			     iocoh:1,  gfrc:1, dbg:1, pad2:1,
-			     msg:1, sem:1, ipi:1, pad:1,
-			     ver:8;
-#else
-		unsigned int ver:8,
-			     pad:1, ipi:1, sem:1, msg:1,
-			     pad2:1, dbg:1, gfrc:1, iocoh:1,
-			     num_cores:6, llm:1, idu:1,
-			     pad3:8;
-#endif
-	} mp;
+	struct mcip_bcr mp;
 
 	READ_BCR(ARC_REG_MCIP_BCR, mp);
 
@@ -114,7 +101,6 @@ static void mcip_probe_n_setup(void)
 		IS_AVAIL1(mp.gfrc, "GFRC"));
 
 	cpuinfo_arc700[0].extn.gfrc = mp.gfrc;
-	idu_detected = mp.idu;
 
 	if (mp.dbg) {
 		__mcip_cmd_data(CMD_DEBUG_SET_SELECT, 0, 0xf);
@@ -130,6 +116,8 @@ struct plat_smp_ops plat_smp_ops = {
 	.ipi_clear	= mcip_ipi_clear,
 };
 
+#endif
+
 /***************************************************************************
  * ARCv2 Interrupt Distribution Unit (IDU)
  *
@@ -193,6 +181,8 @@ idu_irq_set_affinity(struct irq_data *data, const struct cpumask *cpumask,
 {
 	unsigned long flags;
 	cpumask_t online;
+	unsigned int destination_bits;
+	unsigned int distribution_mode;
 
 	/* errout if no online cpu per @cpumask */
 	if (!cpumask_and(&online, cpumask, cpu_online_mask))
@@ -200,8 +190,15 @@ idu_irq_set_affinity(struct irq_data *data, const struct cpumask *cpumask,
 
 	raw_spin_lock_irqsave(&mcip_lock, flags);
 
-	idu_set_dest(data->hwirq, cpumask_bits(&online)[0]);
-	idu_set_mode(data->hwirq, IDU_M_TRIG_LEVEL, IDU_M_DISTRI_RR);
+	destination_bits = cpumask_bits(&online)[0];
+	idu_set_dest(data->hwirq, destination_bits);
+
+	if (ffs(destination_bits) == fls(destination_bits))
+		distribution_mode = IDU_M_DISTRI_DEST;
+	else
+		distribution_mode = IDU_M_DISTRI_RR;
+
+	idu_set_mode(data->hwirq, IDU_M_TRIG_LEVEL, distribution_mode);
 
 	raw_spin_unlock_irqrestore(&mcip_lock, flags);
 
@@ -219,16 +216,15 @@ static struct irq_chip idu_irq_chip = {
 
 };
 
-static int idu_first_irq;
+static irq_hw_number_t idu_first_hwirq;
 
 static void idu_cascade_isr(struct irq_desc *desc)
 {
-	struct irq_domain *domain = irq_desc_get_handler_data(desc);
-	unsigned int core_irq = irq_desc_get_irq(desc);
-	unsigned int idu_irq;
+	struct irq_domain *idu_domain = irq_desc_get_handler_data(desc);
+	irq_hw_number_t core_hwirq = irqd_to_hwirq(irq_desc_get_irq_data(desc));
+	irq_hw_number_t idu_hwirq = core_hwirq - idu_first_hwirq;
 
-	idu_irq = core_irq - idu_first_irq;
-	generic_handle_irq(irq_find_mapping(domain, idu_irq));
+	generic_handle_irq(irq_find_mapping(idu_domain, idu_hwirq));
 }
 
 static int idu_irq_map(struct irq_domain *d, unsigned int virq, irq_hw_number_t hwirq)
@@ -294,9 +290,12 @@ idu_of_init(struct device_node *intc, struct device_node *parent)
 	struct irq_domain *domain;
 	/* Read IDU BCR to confirm nr_irqs */
 	int nr_irqs = of_irq_count(intc);
-	int i, irq;
+	int i, virq;
+	struct mcip_bcr mp;
+
+	READ_BCR(ARC_REG_MCIP_BCR, mp);
 
-	if (!idu_detected)
+	if (!mp.idu)
 		panic("IDU not detected, but DeviceTree using it");
 
 	pr_info("MCIP: IDU referenced from Devicetree %d irqs\n", nr_irqs);
@@ -312,11 +311,11 @@ idu_of_init(struct device_node *intc, struct device_node *parent)
 		 * however we need it to get the parent virq and set IDU handler
 		 * as first level isr
 		 */
-		irq = irq_of_parse_and_map(intc, i);
+		virq = irq_of_parse_and_map(intc, i);
 		if (!i)
-			idu_first_irq = irq;
+			idu_first_hwirq = irqd_to_hwirq(irq_get_irq_data(virq));
 
-		irq_set_chained_handler_and_data(irq, idu_cascade_isr, domain);
+		irq_set_chained_handler_and_data(virq, idu_cascade_isr, domain);
 	}
 
 	__mcip_cmd(CMD_IDU_ENABLE, 0);

arch/arc/kernel/module.c

@@ -30,17 +30,9 @@ int module_frob_arch_sections(Elf_Ehdr *hdr, Elf_Shdr *sechdrs,
 			      char *secstr, struct module *mod)
 {
 #ifdef CONFIG_ARC_DW2_UNWIND
-	int i;
-
 	mod->arch.unw_sec_idx = 0;
 	mod->arch.unw_info = NULL;
-
-	for (i = 1; i < hdr->e_shnum; i++) {
-		if (strcmp(secstr+sechdrs[i].sh_name, ".eh_frame") == 0) {
-			mod->arch.unw_sec_idx = i;
-			break;
-		}
-	}
+	mod->arch.secstr = secstr;
 #endif
 	return 0;
 }
@@ -59,29 +51,33 @@ int apply_relocate_add(Elf32_Shdr *sechdrs,
 		       unsigned int relsec,	/* sec index for relo sec */
 		       struct module *module)
 {
-	int i, n;
+	int i, n, relo_type;
 	Elf32_Rela *rel_entry = (void *)sechdrs[relsec].sh_addr;
 	Elf32_Sym *sym_entry, *sym_sec;
-	Elf32_Addr relocation;
-	Elf32_Addr location;
-	Elf32_Addr sec_to_patch;
-	int relo_type;
-
-	sec_to_patch = sechdrs[sechdrs[relsec].sh_info].sh_addr;
+	Elf32_Addr relocation, location, tgt_addr;
+	unsigned int tgtsec;
+
+	/*
+	 * @relsec has relocations e.g. .rela.init.text
+	 * @tgtsec is section to patch e.g. .init.text
+	 */
+	tgtsec = sechdrs[relsec].sh_info;
+	tgt_addr = sechdrs[tgtsec].sh_addr;
 	sym_sec = (Elf32_Sym *) sechdrs[symindex].sh_addr;
 	n = sechdrs[relsec].sh_size / sizeof(*rel_entry);
 
-	pr_debug("\n========== Module Sym reloc ===========================\n");
-	pr_debug("Section to fixup %x\n", sec_to_patch);
+	pr_debug("\nSection to fixup %s @%x\n",
+		 module->arch.secstr + sechdrs[tgtsec].sh_name, tgt_addr);
 	pr_debug("=========================================================\n");
-	pr_debug("rela->r_off | rela->addend | sym->st_value | ADDR | VALUE\n");
+	pr_debug("r_off\tr_add\tst_value ADDRESS  VALUE\n");
 	pr_debug("=========================================================\n");
 
 	/* Loop thru entries in relocation section */
 	for (i = 0; i < n; i++) {
+		const char *s;
 
 		/* This is where to make the change */
-		location = sec_to_patch + rel_entry[i].r_offset;
+		location = tgt_addr + rel_entry[i].r_offset;
 
 		/* This is the symbol it is referring to.  Note that all
 		   undefined symbols have been resolved.  */
@@ -89,10 +85,15 @@ int apply_relocate_add(Elf32_Shdr *sechdrs,
 
 		relocation = sym_entry->st_value + rel_entry[i].r_addend;
 
-		pr_debug("\t%x\t\t%x\t\t%x  %x %x [%s]\n",
-			rel_entry[i].r_offset, rel_entry[i].r_addend,
-			sym_entry->st_value, location, relocation,
-			strtab + sym_entry->st_name);
+		if (sym_entry->st_name == 0 && ELF_ST_TYPE (sym_entry->st_info) == STT_SECTION) {
+			s = module->arch.secstr + sechdrs[sym_entry->st_shndx].sh_name;
+		} else {
+			s = strtab + sym_entry->st_name;
+		}
+
+		pr_debug("   %x\t%x\t%x %x %x [%s]\n",
+			 rel_entry[i].r_offset, rel_entry[i].r_addend,
+			 sym_entry->st_value, location, relocation, s);
 
 		/* This assumes modules are built with -mlong-calls
 		 * so any branches/jumps are absolute 32 bit jmps
@@ -111,6 +112,10 @@ int apply_relocate_add(Elf32_Shdr *sechdrs,
 			goto relo_err;
 
 	}
+
+	if (strcmp(module->arch.secstr+sechdrs[tgtsec].sh_name, ".eh_frame") == 0)
+		module->arch.unw_sec_idx = tgtsec;
+
 	return 0;
 
 relo_err:

arch/arc/kernel/process.c

@@ -41,6 +41,41 @@ SYSCALL_DEFINE0(arc_gettls)
 	return task_thread_info(current)->thr_ptr;
 }
 
+SYSCALL_DEFINE3(arc_usr_cmpxchg, int *, uaddr, int, expected, int, new)
+{
+	struct pt_regs *regs = current_pt_regs();
+	int uval = -EFAULT;
+
+	/*
+	 * This is only for old cores lacking LLOCK/SCOND, which by defintion
+	 * can't possibly be SMP. Thus doesn't need to be SMP safe.
+	 * And this also helps reduce the overhead for serializing in
+	 * the UP case
+	 */
+	WARN_ON_ONCE(IS_ENABLED(CONFIG_SMP));
+
+	/* Z indicates to userspace if operation succeded */
+	regs->status32 &= ~STATUS_Z_MASK;
+
+	if (!access_ok(VERIFY_WRITE, uaddr, sizeof(int)))
+		return -EFAULT;
+
+	preempt_disable();
+
+	if (__get_user(uval, uaddr))
+		goto done;
+
+	if (uval == expected) {
+		if (!__put_user(new, uaddr))
+			regs->status32 |= STATUS_Z_MASK;
+	}
+
+done:
+	preempt_enable();
+
+	return uval;
+}
+
 void arch_cpu_idle(void)
 {
 	/* sleep, but enable all interrupts before committing */

arch/arc/kernel/setup.c

@@ -40,6 +40,29 @@ struct task_struct *_current_task[NR_CPUS];	/* For stack switching */
 
 struct cpuinfo_arc cpuinfo_arc700[NR_CPUS];
 
+static const struct id_to_str arc_cpu_rel[] = {
+#ifdef CONFIG_ISA_ARCOMPACT
+	{ 0x34, "R4.10"},
+	{ 0x35, "R4.11"},
+#else
+	{ 0x51, "R2.0" },
+	{ 0x52, "R2.1" },
+	{ 0x53, "R3.0" },
+#endif
+	{ 0x00, NULL   }
+};
+
+static const struct id_to_str arc_cpu_nm[] = {
+#ifdef CONFIG_ISA_ARCOMPACT
+	{ 0x20, "ARC 600"   },
+	{ 0x30, "ARC 770"   },  /* 750 identified seperately */
+#else
+	{ 0x40, "ARC EM"  },
+	{ 0x50, "ARC HS38"  },
+#endif
+	{ 0x00, "Unknown"   }
+};
+
 static void read_decode_ccm_bcr(struct cpuinfo_arc *cpu)
 {
 	if (is_isa_arcompact()) {
@@ -92,11 +115,26 @@ static void read_arc_build_cfg_regs(void)
 	struct bcr_timer timer;
 	struct bcr_generic bcr;
 	struct cpuinfo_arc *cpu = &cpuinfo_arc700[smp_processor_id()];
+	const struct id_to_str *tbl;
+
 	FIX_PTR(cpu);
 
 	READ_BCR(AUX_IDENTITY, cpu->core);
 	READ_BCR(ARC_REG_ISA_CFG_BCR, cpu->isa);
 
+	for (tbl = &arc_cpu_rel[0]; tbl->id != 0; tbl++) {
+		if (cpu->core.family == tbl->id) {
+			cpu->details = tbl->str;
+			break;
+		}
+	}
+
+	for (tbl = &arc_cpu_nm[0]; tbl->id != 0; tbl++) {
+		if ((cpu->core.family & 0xF0) == tbl->id)
+			break;
+	}
+	cpu->name = tbl->str;
+
 	READ_BCR(ARC_REG_TIMERS_BCR, timer);
 	cpu->extn.timer0 = timer.t0;
 	cpu->extn.timer1 = timer.t1;
@@ -111,6 +149,9 @@ static void read_arc_build_cfg_regs(void)
 	cpu->extn.swap = read_aux_reg(ARC_REG_SWAP_BCR) ? 1 : 0;        /* 1,3 */
 	cpu->extn.crc = read_aux_reg(ARC_REG_CRC_BCR) ? 1 : 0;
 	cpu->extn.minmax = read_aux_reg(ARC_REG_MIXMAX_BCR) > 1 ? 1 : 0; /* 2 */
+	cpu->extn.swape = (cpu->core.family >= 0x34) ? 1 :
+				IS_ENABLED(CONFIG_ARC_HAS_SWAPE);
+
 	READ_BCR(ARC_REG_XY_MEM_BCR, cpu->extn_xymem);
 
 	/* Read CCM BCRs for boot reporting even if not enabled in Kconfig */
@@ -160,64 +201,38 @@ static void read_arc_build_cfg_regs(void)
 	cpu->extn.rtt = bcr.ver ? 1 : 0;
 
 	cpu->extn.debug = cpu->extn.ap | cpu->extn.smart | cpu->extn.rtt;
-}
 
-static const struct cpuinfo_data arc_cpu_tbl[] = {
-#ifdef CONFIG_ISA_ARCOMPACT
-	{ {0x20, "ARC 600"      }, 0x2F},
-	{ {0x30, "ARC 700"      }, 0x33},
-	{ {0x34, "ARC 700 R4.10"}, 0x34},
-	{ {0x35, "ARC 700 R4.11"}, 0x35},
-#else
-	{ {0x50, "ARC HS38 R2.0"}, 0x51},
-	{ {0x52, "ARC HS38 R2.1"}, 0x52},
-	{ {0x53, "ARC HS38 R3.0"}, 0x53},
-#endif
-	{ {0x00, NULL		} }
-};
+	/* some hacks for lack of feature BCR info in old ARC700 cores */
+	if (is_isa_arcompact()) {
+		if (!cpu->isa.ver)	/* ISA BCR absent, use Kconfig info */
+			cpu->isa.atomic = IS_ENABLED(CONFIG_ARC_HAS_LLSC);
+		else
+			cpu->isa.atomic = cpu->isa.atomic1;
 
+		cpu->isa.be = IS_ENABLED(CONFIG_CPU_BIG_ENDIAN);
+
+		 /* there's no direct way to distinguish 750 vs. 770 */
+		if (unlikely(cpu->core.family < 0x34 || cpu->mmu.ver < 3))
+			cpu->name = "ARC750";
+	}
+}
 
 static char *arc_cpu_mumbojumbo(int cpu_id, char *buf, int len)
 {
 	struct cpuinfo_arc *cpu = &cpuinfo_arc700[cpu_id];
 	struct bcr_identity *core = &cpu->core;
-	const struct cpuinfo_data *tbl;
-	char *isa_nm;
-	int i, be, atomic;
-	int n = 0;
+	int i, n = 0;
 
 	FIX_PTR(cpu);
 
-	if (is_isa_arcompact()) {
-		isa_nm = "ARCompact";
-		be = IS_ENABLED(CONFIG_CPU_BIG_ENDIAN);
-
-		atomic = cpu->isa.atomic1;
-		if (!cpu->isa.ver)	/* ISA BCR absent, use Kconfig info */
-			atomic = IS_ENABLED(CONFIG_ARC_HAS_LLSC);
-	} else {
-		isa_nm = "ARCv2";
-		be = cpu->isa.be;
-		atomic = cpu->isa.atomic;
-	}
-
 	n += scnprintf(buf + n, len - n,
 		       "\nIDENTITY\t: ARCVER [%#02x] ARCNUM [%#02x] CHIPID [%#4x]\n",
 		       core->family, core->cpu_id, core->chip_id);
 
-	for (tbl = &arc_cpu_tbl[0]; tbl->info.id != 0; tbl++) {
-		if ((core->family >= tbl->info.id) &&
-		    (core->family <= tbl->up_range)) {
-			n += scnprintf(buf + n, len - n,
-				       "processor [%d]\t: %s (%s ISA) %s\n",
-				       cpu_id, tbl->info.str, isa_nm,
-				       IS_AVAIL1(be, "[Big-Endian]"));
-			break;
-		}
-	}
-
-	if (tbl->info.id == 0)
-		n += scnprintf(buf + n, len - n, "UNKNOWN ARC Processor\n");
+	n += scnprintf(buf + n, len - n, "processor [%d]\t: %s %s (%s ISA) %s\n",
+		       cpu_id, cpu->name, cpu->details,
+		       is_isa_arcompact() ? "ARCompact" : "ARCv2",
+		       IS_AVAIL1(cpu->isa.be, "[Big-Endian]"));
 
 	n += scnprintf(buf + n, len - n, "Timers\t\t: %s%s%s%s\nISA Extn\t: ",
 		       IS_AVAIL1(cpu->extn.timer0, "Timer0 "),
@@ -226,7 +241,7 @@ static char *arc_cpu_mumbojumbo(int cpu_id, char *buf, int len)
 				 CONFIG_ARC_HAS_RTC));
 
 	n += i = scnprintf(buf + n, len - n, "%s%s%s%s%s",
-			   IS_AVAIL2(atomic, "atomic ", CONFIG_ARC_HAS_LLSC),
+			   IS_AVAIL2(cpu->isa.atomic, "atomic ", CONFIG_ARC_HAS_LLSC),
 			   IS_AVAIL2(cpu->isa.ldd, "ll64 ", CONFIG_ARC_HAS_LL64),
 			   IS_AVAIL1(cpu->isa.unalign, "unalign (not used)"));
 
@@ -253,7 +268,7 @@ static char *arc_cpu_mumbojumbo(int cpu_id, char *buf, int len)
 		       IS_AVAIL1(cpu->extn.swap, "swap "),
 		       IS_AVAIL1(cpu->extn.minmax, "minmax "),
 		       IS_AVAIL1(cpu->extn.crc, "crc "),
-		       IS_AVAIL2(1, "swape", CONFIG_ARC_HAS_SWAPE));
+		       IS_AVAIL2(cpu->extn.swape, "swape", CONFIG_ARC_HAS_SWAPE));
 
 	if (cpu->bpu.ver)
 		n += scnprintf(buf + n, len - n,
@@ -272,9 +287,7 @@ static char *arc_extn_mumbojumbo(int cpu_id, char *buf, int len)
 
 	FIX_PTR(cpu);
 
-	n += scnprintf(buf + n, len - n,
-		       "Vector Table\t: %#x\nPeripherals\t: %#lx:%#lx\n",
-		       cpu->vec_base, perip_base, perip_end);
+	n += scnprintf(buf + n, len - n, "Vector Table\t: %#x\n", cpu->vec_base);
 
 	if (cpu->extn.fpu_sp || cpu->extn.fpu_dp)
 		n += scnprintf(buf + n, len - n, "FPU\t\t: %s%s\n",
@@ -507,7 +520,7 @@ static void *c_start(struct seq_file *m, loff_t *pos)
 	 * way to pass it w/o having to kmalloc/free a 2 byte string.
 	 * Encode cpu-id as 0xFFcccc, which is decoded by show routine.
 	 */
-	return *pos < num_possible_cpus() ? cpu_to_ptr(*pos) : NULL;
+	return *pos < nr_cpu_ids ? cpu_to_ptr(*pos) : NULL;
 }
 
 static void *c_next(struct seq_file *m, void *v, loff_t *pos)

arch/arc/kernel/smp.c

@@ -22,6 +22,7 @@
 #include <linux/atomic.h>
 #include <linux/cpumask.h>
 #include <linux/reboot.h>
+#include <linux/irqdomain.h>
 #include <asm/processor.h>
 #include <asm/setup.h>
 #include <asm/mach_desc.h>
@@ -67,11 +68,13 @@ void __init smp_prepare_cpus(unsigned int max_cpus)
 	int i;
 
 	/*
-	 * Initialise the present map, which describes the set of CPUs
-	 * actually populated at the present time.
+	 * if platform didn't set the present map already, do it now
+	 * boot cpu is set to present already by init/main.c
 	 */
-	for (i = 0; i < max_cpus; i++)
-		set_cpu_present(i, true);
+	if (num_present_cpus() <= 1) {
+		for (i = 0; i < max_cpus; i++)
+			set_cpu_present(i, true);
+	}
 }
 
 void __init smp_cpus_done(unsigned int max_cpus)
@@ -351,20 +354,24 @@ irqreturn_t do_IPI(int irq, void *dev_id)
  */
 static DEFINE_PER_CPU(int, ipi_dev);
 
-int smp_ipi_irq_setup(int cpu, int irq)
+int smp_ipi_irq_setup(int cpu, irq_hw_number_t hwirq)
 {
 	int *dev = per_cpu_ptr(&ipi_dev, cpu);
+	unsigned int virq = irq_find_mapping(NULL, hwirq);
+
+	if (!virq)
+		panic("Cannot find virq for root domain and hwirq=%lu", hwirq);
 
 	/* Boot cpu calls request, all call enable */
 	if (!cpu) {
 		int rc;
 
-		rc = request_percpu_irq(irq, do_IPI, "IPI Interrupt", dev);
+		rc = request_percpu_irq(virq, do_IPI, "IPI Interrupt", dev);
 		if (rc)
-			panic("Percpu IRQ request failed for %d\n", irq);
+			panic("Percpu IRQ request failed for %u\n", virq);
 	}
 
-	enable_percpu_irq(irq, 0);
+	enable_percpu_irq(virq, 0);
 
 	return 0;
 }

arch/arc/kernel/time.c

@@ -152,14 +152,17 @@ static cycle_t arc_read_rtc(struct clocksource *cs)
 		cycle_t  full;
 	} stamp;
 
-
-	__asm__ __volatile(
-	"1:						\n"
-	"	lr		%0, [AUX_RTC_LOW]	\n"
-	"	lr		%1, [AUX_RTC_HIGH]	\n"
-	"	lr		%2, [AUX_RTC_CTRL]	\n"
-	"	bbit0.nt	%2, 31, 1b		\n"
-	: "=r" (stamp.low), "=r" (stamp.high), "=r" (status));
+	/*
+	 * hardware has an internal state machine which tracks readout of
+	 * low/high and updates the CTRL.status if
+	 *  - interrupt/exception taken between the two reads
+	 *  - high increments after low has been read
+	 */
+	do {
+		stamp.low = read_aux_reg(AUX_RTC_LOW);
+		stamp.high = read_aux_reg(AUX_RTC_HIGH);
+		status = read_aux_reg(AUX_RTC_CTRL);
+	} while (!(status & _BITUL(31)));
 
 	return stamp.full;
 }

arch/arc/kernel/troubleshoot.c

@@ -237,113 +237,3 @@ void show_kernel_fault_diag(const char *str, struct pt_regs *regs,
 	if (!user_mode(regs))
 		show_stacktrace(current, regs);
 }
-
-#ifdef CONFIG_DEBUG_FS
-
-#include <linux/module.h>
-#include <linux/fs.h>
-#include <linux/mount.h>
-#include <linux/pagemap.h>
-#include <linux/init.h>
-#include <linux/namei.h>
-#include <linux/debugfs.h>
-
-static struct dentry *test_dentry;
-static struct dentry *test_dir;
-static struct dentry *test_u32_dentry;
-
-static u32 clr_on_read = 1;
-
-#ifdef CONFIG_ARC_DBG_TLB_MISS_COUNT
-u32 numitlb, numdtlb, num_pte_not_present;
-
-static int fill_display_data(char *kbuf)
-{
-	size_t num = 0;
-	num += sprintf(kbuf + num, "I-TLB Miss %x\n", numitlb);
-	num += sprintf(kbuf + num, "D-TLB Miss %x\n", numdtlb);
-	num += sprintf(kbuf + num, "PTE not present %x\n", num_pte_not_present);
-
-	if (clr_on_read)
-		numitlb = numdtlb = num_pte_not_present = 0;
-
-	return num;
-}
-
-static int tlb_stats_open(struct inode *inode, struct file *file)
-{
-	file->private_data = (void *)__get_free_page(GFP_KERNEL);
-	return 0;
-}
-
-/* called on user read(): display the counters */
-static ssize_t tlb_stats_output(struct file *file,	/* file descriptor */
-				char __user *user_buf,	/* user buffer */
-				size_t len,		/* length of buffer */
-				loff_t *offset)		/* offset in the file */
-{
-	size_t num;
-	char *kbuf = (char *)file->private_data;
-
-	/* All of the data can he shoved in one iteration */
-	if (*offset != 0)
-		return 0;
-
-	num = fill_display_data(kbuf);
-
-	/* simple_read_from_buffer() is helper for copy to user space
-	   It copies up to @2 (num) bytes from kernel buffer @4 (kbuf) at offset
-	   @3 (offset) into the user space address starting at @1 (user_buf).
-	   @5 (len) is max size of user buffer
-	 */
-	return simple_read_from_buffer(user_buf, num, offset, kbuf, len);
-}
-
-/* called on user write : clears the counters */
-static ssize_t tlb_stats_clear(struct file *file, const char __user *user_buf,
-			       size_t length, loff_t *offset)
-{
-	numitlb = numdtlb = num_pte_not_present = 0;
-	return length;
-}
-
-static int tlb_stats_close(struct inode *inode, struct file *file)
-{
-	free_page((unsigned long)(file->private_data));
-	return 0;
-}
-
-static const struct file_operations tlb_stats_file_ops = {
-	.read = tlb_stats_output,
-	.write = tlb_stats_clear,
-	.open = tlb_stats_open,
-	.release = tlb_stats_close
-};
-#endif
-
-static int __init arc_debugfs_init(void)
-{
-	test_dir = debugfs_create_dir("arc", NULL);
-
-#ifdef CONFIG_ARC_DBG_TLB_MISS_COUNT
-	test_dentry = debugfs_create_file("tlb_stats", 0444, test_dir, NULL,
-					  &tlb_stats_file_ops);
-#endif
-
-	test_u32_dentry =
-	    debugfs_create_u32("clr_on_read", 0444, test_dir, &clr_on_read);
-
-	return 0;
-}
-
-module_init(arc_debugfs_init);
-
-static void __exit arc_debugfs_exit(void)
-{
-	debugfs_remove(test_u32_dentry);
-	debugfs_remove(test_dentry);
-	debugfs_remove(test_dir);
-}
-module_exit(arc_debugfs_exit);
-
-#endif

arch/arc/mm/cache.c

@@ -22,8 +22,8 @@
 #include <asm/setup.h>
 
 static int l2_line_sz;
-int ioc_exists;
-volatile int slc_enable = 1, ioc_enable = 1;
+static int ioc_exists;
+int slc_enable = 1, ioc_enable = 1;
 unsigned long perip_base = ARC_UNCACHED_ADDR_SPACE; /* legacy value for boot */
 unsigned long perip_end = 0xFFFFFFFF; /* legacy value */
 
@@ -53,18 +53,15 @@ char *arc_cache_mumbojumbo(int c, char *buf, int len)
 	PR_CACHE(&cpuinfo_arc700[c].icache, CONFIG_ARC_HAS_ICACHE, "I-Cache");
 	PR_CACHE(&cpuinfo_arc700[c].dcache, CONFIG_ARC_HAS_DCACHE, "D-Cache");
 
-	if (!is_isa_arcv2())
-                return buf;
-
 	p = &cpuinfo_arc700[c].slc;
 	if (p->ver)
 		n += scnprintf(buf + n, len - n,
 			       "SLC\t\t: %uK, %uB Line%s\n",
 			       p->sz_k, p->line_len, IS_USED_RUN(slc_enable));
 
-	if (ioc_exists)
-		n += scnprintf(buf + n, len - n, "IOC\t\t:%s\n",
-				IS_DISABLED_RUN(ioc_enable));
+	n += scnprintf(buf + n, len - n, "Peripherals\t: %#lx%s%s\n",
+		       perip_base,
+		       IS_AVAIL3(ioc_exists, ioc_enable, ", IO-Coherency "));
 
 	return buf;
 }
@@ -113,8 +110,10 @@ static void read_decode_cache_bcr_arcv2(int cpu)
 	}
 
 	READ_BCR(ARC_REG_CLUSTER_BCR, cbcr);
-	if (cbcr.c && ioc_enable)
+	if (cbcr.c)
 		ioc_exists = 1;
+	else
+		ioc_enable = 0;
 
 	/* HS 2.0 didn't have AUX_VOL */
 	if (cpuinfo_arc700[cpu].core.family > 0x51) {
@@ -1002,7 +1001,7 @@ void arc_cache_init(void)
 			read_aux_reg(ARC_REG_SLC_CTRL) | SLC_CTRL_DISABLE);
 	}
 
-	if (is_isa_arcv2() && ioc_exists) {
+	if (is_isa_arcv2() && ioc_enable) {
 		/* IO coherency base - 0x8z */
 		write_aux_reg(ARC_REG_IO_COH_AP0_BASE, 0x80000);
 		/* IO coherency aperture size - 512Mb: 0x8z-0xAz */

arch/arc/mm/dma.c

@@ -45,7 +45,7 @@ static void *arc_dma_alloc(struct device *dev, size_t size,
 	 *   -For coherent data, Read/Write to buffers terminate early in cache
 	 *   (vs. always going to memory - thus are faster)
 	 */
-	if ((is_isa_arcv2() && ioc_exists) ||
+	if ((is_isa_arcv2() && ioc_enable) ||
 	    (attrs & DMA_ATTR_NON_CONSISTENT))
 		need_coh = 0;
 
@@ -97,7 +97,7 @@ static void arc_dma_free(struct device *dev, size_t size, void *vaddr,
 	int is_non_coh = 1;
 
 	is_non_coh = (attrs & DMA_ATTR_NON_CONSISTENT) ||
-			(is_isa_arcv2() && ioc_exists);
+			(is_isa_arcv2() && ioc_enable);
 
 	if (PageHighMem(page) || !is_non_coh)
 		iounmap((void __force __iomem *)vaddr);
@@ -105,6 +105,31 @@ static void arc_dma_free(struct device *dev, size_t size, void *vaddr,
 	__free_pages(page, get_order(size));
 }
 
+static int arc_dma_mmap(struct device *dev, struct vm_area_struct *vma,
+			void *cpu_addr, dma_addr_t dma_addr, size_t size,
+			unsigned long attrs)
+{
+	unsigned long user_count = vma_pages(vma);
+	unsigned long count = PAGE_ALIGN(size) >> PAGE_SHIFT;
+	unsigned long pfn = __phys_to_pfn(plat_dma_to_phys(dev, dma_addr));
+	unsigned long off = vma->vm_pgoff;
+	int ret = -ENXIO;
+
+	vma->vm_page_prot = pgprot_noncached(vma->vm_page_prot);
+
+	if (dma_mmap_from_coherent(dev, vma, cpu_addr, size, &ret))
+		return ret;
+
+	if (off < count && user_count <= (count - off)) {
+		ret = remap_pfn_range(vma, vma->vm_start,
+				      pfn + off,
+				      user_count << PAGE_SHIFT,
+				      vma->vm_page_prot);
+	}
+
+	return ret;
+}
+
 /*
  * streaming DMA Mapping API...
  * CPU accesses page via normal paddr, thus needs to explicitly made
@@ -193,6 +218,7 @@ static int arc_dma_supported(struct device *dev, u64 dma_mask)
 struct dma_map_ops arc_dma_ops = {
 	.alloc			= arc_dma_alloc,
 	.free			= arc_dma_free,
+	.mmap			= arc_dma_mmap,
 	.map_page		= arc_dma_map_page,
 	.map_sg			= arc_dma_map_sg,
 	.sync_single_for_device	= arc_dma_sync_single_for_device,

arch/arc/mm/tlb.c

@@ -793,16 +793,16 @@ char *arc_mmu_mumbojumbo(int cpu_id, char *buf, int len)
 	char super_pg[64] = "";
 
 	if (p_mmu->s_pg_sz_m)
-		scnprintf(super_pg, 64, "%dM Super Page%s, ",
+		scnprintf(super_pg, 64, "%dM Super Page %s",
 			  p_mmu->s_pg_sz_m,
 			  IS_USED_CFG(CONFIG_TRANSPARENT_HUGEPAGE));
 
 	n += scnprintf(buf + n, len - n,
-		      "MMU [v%x]\t: %dk PAGE, %sJTLB %d (%dx%d), uDTLB %d, uITLB %d %s%s\n",
+		      "MMU [v%x]\t: %dk PAGE, %sJTLB %d (%dx%d), uDTLB %d, uITLB %d%s%s\n",
 		       p_mmu->ver, p_mmu->pg_sz_k, super_pg,
 		       p_mmu->sets * p_mmu->ways, p_mmu->sets, p_mmu->ways,
 		       p_mmu->u_dtlb, p_mmu->u_itlb,
-		       IS_AVAIL2(p_mmu->pae, "PAE40 ", CONFIG_ARC_HAS_PAE40));
+		       IS_AVAIL2(p_mmu->pae, ", PAE40 ", CONFIG_ARC_HAS_PAE40));
 
 	return buf;
 }

arch/arc/mm/tlbex.S

@@ -237,15 +237,6 @@ ex_saved_reg1:
 
 2:
 
-#ifdef CONFIG_ARC_DBG_TLB_MISS_COUNT
-	and.f 0, r0, _PAGE_PRESENT
-	bz   1f
-	ld   r3, [num_pte_not_present]
-	add  r3, r3, 1
-	st   r3, [num_pte_not_present]
-1:
-#endif
-
 .endm
 
 ;-----------------------------------------------------------------
@@ -309,12 +300,6 @@ ENTRY(EV_TLBMissI)
 
 	TLBMISS_FREEUP_REGS
 
-#ifdef CONFIG_ARC_DBG_TLB_MISS_COUNT
-	ld  r0, [@numitlb]
-	add r0, r0, 1
-	st  r0, [@numitlb]
-#endif
-
 	;----------------------------------------------------------------
 	; Get the PTE corresponding to V-addr accessed, r2 is setup with EFA
 	LOAD_FAULT_PTE
@@ -349,12 +334,6 @@ ENTRY(EV_TLBMissD)
 
 	TLBMISS_FREEUP_REGS
 
-#ifdef CONFIG_ARC_DBG_TLB_MISS_COUNT
-	ld  r0, [@numdtlb]
-	add r0, r0, 1
-	st  r0, [@numdtlb]
-#endif
-
 	;----------------------------------------------------------------
 	; Get the PTE corresponding to V-addr accessed
 	; If PTE exists, it will setup, r0 = PTE, r1 = Ptr to PTE, r2 = EFA

arch/arc/plat-eznps/smp.c

@@ -140,16 +140,10 @@ static void eznps_init_per_cpu(int cpu)
 	mtm_enable_core(cpu);
 }
 
-static void eznps_ipi_clear(int irq)
-{
-	write_aux_reg(CTOP_AUX_IACK, 1 << irq);
-}
-
 struct plat_smp_ops plat_smp_ops = {
 	.info		= smp_cpuinfo_buf,
 	.init_early_smp	= eznps_init_cpumasks,
 	.cpu_kick	= eznps_smp_wakeup_cpu,
 	.ipi_send	= eznps_ipi_send,
 	.init_per_cpu	= eznps_init_per_cpu,
-	.ipi_clear	= eznps_ipi_clear,
 };

arch/arm/boot/dts/imx53-qsb.dts

@@ -64,8 +64,8 @@
 			};
 
 			ldo3_reg: ldo3 {
-				regulator-min-microvolt = <600000>;
-				regulator-max-microvolt = <1800000>;
+				regulator-min-microvolt = <1725000>;
+				regulator-max-microvolt = <3300000>;
 				regulator-always-on;
 			};
 
@@ -76,8 +76,8 @@
 			};
 
 			ldo5_reg: ldo5 {
-				regulator-min-microvolt = <1725000>;
-				regulator-max-microvolt = <3300000>;
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <3600000>;
 				regulator-always-on;
 			};
 
@@ -100,14 +100,14 @@
 			};
 
 			ldo9_reg: ldo9 {
-				regulator-min-microvolt = <1200000>;
+				regulator-min-microvolt = <1250000>;
 				regulator-max-microvolt = <3600000>;
 				regulator-always-on;
 			};
 
 			ldo10_reg: ldo10 {
-				regulator-min-microvolt = <1250000>;
-				regulator-max-microvolt = <3650000>;
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <3600000>;
 				regulator-always-on;
 			};
 		};

arch/arm/boot/dts/logicpd-som-lv.dtsi

@@ -13,6 +13,11 @@
 		};
 	};
 
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x80000000 0>;
+	};
+
 	wl12xx_vmmc: wl12xx_vmmc {
 		compatible = "regulator-fixed";
 		regulator-name = "vwl1271";

arch/arm/boot/dts/logicpd-torpedo-som.dtsi

@@ -13,9 +13,9 @@
 		};
 	};
 
-	memory@0 {
+	memory@80000000 {
 		device_type = "memory";
-		reg = <0 0>;
+		reg = <0x80000000 0>;
 	};
 
 	leds {

arch/arm/boot/dts/omap5-board-common.dtsi

@@ -124,6 +124,7 @@
 		compatible = "ti,abe-twl6040";
 		ti,model = "omap5-uevm";
 
+		ti,jack-detection;
 		ti,mclk-freq = <19200000>;
 
 		ti,mcpdm = <&mcpdm>;
@@ -415,7 +416,7 @@
 			ti,backup-battery-charge-high-current;
 		};
 
-		gpadc {
+		gpadc: gpadc {
 			compatible = "ti,palmas-gpadc";
 			interrupts = <18 0
 				      16 0
@@ -475,8 +476,8 @@
 				smps6_reg: smps6 {
 					/* VDD_DDR3 - over VDD_SMPS6 */
 					regulator-name = "smps6";
-					regulator-min-microvolt = <1200000>;
-					regulator-max-microvolt = <1200000>;
+					regulator-min-microvolt = <1350000>;
+					regulator-max-microvolt = <1350000>;
 					regulator-always-on;
 					regulator-boot-on;
 				};

arch/arm/boot/dts/ste-snowball.dts

@@ -239,14 +239,25 @@
 			arm,primecell-periphid = <0x10480180>;
 			max-frequency = <100000000>;
 			bus-width = <4>;
+			cap-sd-highspeed;
 			cap-mmc-highspeed;
+			sd-uhs-sdr12;
+			sd-uhs-sdr25;
+			/* All direction control is used */
+			st,sig-dir-cmd;
+			st,sig-dir-dat0;
+			st,sig-dir-dat2;
+			st,sig-dir-dat31;
+			st,sig-pin-fbclk;
+			full-pwr-cycle;
 			vmmc-supply = <&ab8500_ldo_aux3_reg>;
 			vqmmc-supply = <&vmmci>;
 			pinctrl-names = "default", "sleep";
 			pinctrl-0 = <&sdi0_default_mode>;
 			pinctrl-1 = <&sdi0_sleep_mode>;
 
-			cd-gpios  = <&gpio6 26 GPIO_ACTIVE_LOW>; // 218
+			/* GPIO218 MMC_CD */
+			cd-gpios  = <&gpio6 26 GPIO_ACTIVE_LOW>;
 
 			status = "okay";
 		};
@@ -549,7 +560,7 @@
 					/* VMMCI level-shifter enable */
 					snowball_cfg3 {
 						pins = "GPIO217_AH12";
-						ste,config = <&gpio_out_lo>;
+						ste,config = <&gpio_out_hi>;
 					};
 					/* VMMCI level-shifter voltage select */
 					snowball_cfg4 {

arch/arm/boot/dts/stih410-b2260.dts

@@ -74,7 +74,7 @@
 		/* Low speed expansion connector */
 		spi0: spi@9844000 {
 			label = "LS-SPI0";
-			cs-gpio = <&pio30 3 0>;
+			cs-gpios = <&pio30 3 0>;
 			status = "okay";
 		};
 

arch/arm/boot/dts/sun8i-a23-a33.dtsi

@@ -282,11 +282,15 @@
 			uart1_pins_a: uart1@0 {
 				allwinner,pins = "PG6", "PG7";
 				allwinner,function = "uart1";
+				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
 			};
 
 			uart1_pins_cts_rts_a: uart1-cts-rts@0 {
 				allwinner,pins = "PG8", "PG9";
 				allwinner,function = "uart1";
+				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
 			};
 
 			mmc0_pins_a: mmc0@0 {

arch/arm/boot/dts/uniphier-pro5.dtsi

@@ -184,11 +184,11 @@
 };
 
 &mio_clk {
-	compatible = "socionext,uniphier-pro5-mio-clock";
+	compatible = "socionext,uniphier-pro5-sd-clock";
 };
 
 &mio_rst {
-	compatible = "socionext,uniphier-pro5-mio-reset";
+	compatible = "socionext,uniphier-pro5-sd-reset";
 };
 
 &peri_clk {

arch/arm/boot/dts/uniphier-pxs2.dtsi

@@ -197,11 +197,11 @@
 };
 
 &mio_clk {
-	compatible = "socionext,uniphier-pxs2-mio-clock";
+	compatible = "socionext,uniphier-pxs2-sd-clock";
 };
 
 &mio_rst {
-	compatible = "socionext,uniphier-pxs2-mio-reset";
+	compatible = "socionext,uniphier-pxs2-sd-reset";
 };
 
 &peri_clk {

arch/arm/boot/dts/vf500.dtsi

@@ -70,7 +70,7 @@
 			global_timer: timer@40002200 {
 				compatible = "arm,cortex-a9-global-timer";
 				reg = <0x40002200 0x20>;
-				interrupts = <GIC_PPI 11 IRQ_TYPE_LEVEL_HIGH>;
+				interrupts = <GIC_PPI 11 IRQ_TYPE_EDGE_RISING>;
 				interrupt-parent = <&intc>;
 				clocks = <&clks VF610_CLK_PLATFORM_BUS>;
 			};

arch/arm/configs/multi_v7_defconfig

@@ -850,6 +850,7 @@ CONFIG_PWM_SUN4I=y
 CONFIG_PWM_TEGRA=y
 CONFIG_PWM_VT8500=y
 CONFIG_PHY_HIX5HD2_SATA=y
+CONFIG_E1000E=y
 CONFIG_PWM_STI=y
 CONFIG_PWM_BCM2835=y
 CONFIG_PWM_BRCMSTB=m

arch/arm/include/asm/kvm_asm.h

@@ -66,6 +66,7 @@ extern char __kvm_hyp_vector[];
 extern void __kvm_flush_vm_context(void);
 extern void __kvm_tlb_flush_vmid_ipa(struct kvm *kvm, phys_addr_t ipa);
 extern void __kvm_tlb_flush_vmid(struct kvm *kvm);
+extern void __kvm_tlb_flush_local_vmid(struct kvm_vcpu *vcpu);
 
 extern int __kvm_vcpu_run(struct kvm_vcpu *vcpu);
 

arch/arm/include/asm/kvm_host.h

@@ -57,6 +57,9 @@ struct kvm_arch {
 	/* VTTBR value associated with below pgd and vmid */
 	u64    vttbr;
 
+	/* The last vcpu id that ran on each physical CPU */
+	int __percpu *last_vcpu_ran;
+
 	/* Timer */
 	struct arch_timer_kvm	timer;
 

arch/arm/include/asm/kvm_hyp.h

@@ -71,6 +71,7 @@
 #define ICIALLUIS	__ACCESS_CP15(c7, 0, c1, 0)
 #define ATS1CPR		__ACCESS_CP15(c7, 0, c8, 0)
 #define TLBIALLIS	__ACCESS_CP15(c8, 0, c3, 0)
+#define TLBIALL		__ACCESS_CP15(c8, 0, c7, 0)
 #define TLBIALLNSNHIS	__ACCESS_CP15(c8, 4, c3, 4)
 #define PRRR		__ACCESS_CP15(c10, 0, c2, 0)
 #define NMRR		__ACCESS_CP15(c10, 0, c2, 1)

arch/arm/include/asm/unistd.h

@@ -19,7 +19,7 @@
  * This may need to be greater than __NR_last_syscall+1 in order to
  * account for the padding in the syscall table
  */
-#define __NR_syscalls  (396)
+#define __NR_syscalls  (400)
 
 #define __ARCH_WANT_STAT64
 #define __ARCH_WANT_SYS_GETHOSTNAME

arch/arm/include/uapi/asm/unistd.h

@@ -420,6 +420,9 @@
 #define __NR_copy_file_range		(__NR_SYSCALL_BASE+391)
 #define __NR_preadv2			(__NR_SYSCALL_BASE+392)
 #define __NR_pwritev2			(__NR_SYSCALL_BASE+393)
+#define __NR_pkey_mprotect		(__NR_SYSCALL_BASE+394)
+#define __NR_pkey_alloc			(__NR_SYSCALL_BASE+395)
+#define __NR_pkey_free			(__NR_SYSCALL_BASE+396)
 
 /*
  * The following SWIs are ARM private.

arch/arm/kernel/calls.S

@@ -403,6 +403,9 @@
 		CALL(sys_copy_file_range)
 		CALL(sys_preadv2)
 		CALL(sys_pwritev2)
+		CALL(sys_pkey_mprotect)
+/* 395 */	CALL(sys_pkey_alloc)
+		CALL(sys_pkey_free)
 #ifndef syscalls_counted
 .equ syscalls_padding, ((NR_syscalls + 3) & ~3) - NR_syscalls
 #define syscalls_counted

arch/arm/kernel/traps.c

@@ -74,6 +74,26 @@ void dump_backtrace_entry(unsigned long where, unsigned long from, unsigned long
 		dump_mem("", "Exception stack", frame + 4, frame + 4 + sizeof(struct pt_regs));
 }
 
+void dump_backtrace_stm(u32 *stack, u32 instruction)
+{
+	char str[80], *p;
+	unsigned int x;
+	int reg;
+
+	for (reg = 10, x = 0, p = str; reg >= 0; reg--) {
+		if (instruction & BIT(reg)) {
+			p += sprintf(p, " r%d:%08x", reg, *stack--);
+			if (++x == 6) {
+				x = 0;
+				p = str;
+				printk("%s\n", str);
+			}
+		}
+	}
+	if (p != str)
+		printk("%s\n", str);
+}
+
 #ifndef CONFIG_ARM_UNWIND
 /*
  * Stack pointers should always be within the kernels view of

arch/arm/kernel/vmlinux-xip.lds.S

@@ -3,6 +3,9 @@
  * Written by Martin Mares <mj@atrey.karlin.mff.cuni.cz>
  */
 
+/* No __ro_after_init data in the .rodata section - which will always be ro */
+#define RO_AFTER_INIT_DATA
+
 #include <asm-generic/vmlinux.lds.h>
 #include <asm/cache.h>
 #include <asm/thread_info.h>
@@ -223,6 +226,8 @@ SECTIONS
 		. = ALIGN(PAGE_SIZE);
 		__init_end = .;
 
+		*(.data..ro_after_init)
+
 		NOSAVE_DATA
 		CACHELINE_ALIGNED_DATA(L1_CACHE_BYTES)
 		READ_MOSTLY_DATA(L1_CACHE_BYTES)

arch/arm/kvm/arm.c

@@ -114,11 +114,18 @@ void kvm_arch_check_processor_compat(void *rtn)
  */
 int kvm_arch_init_vm(struct kvm *kvm, unsigned long type)
 {
-	int ret = 0;
+	int ret, cpu;
 
 	if (type)
 		return -EINVAL;
 
+	kvm->arch.last_vcpu_ran = alloc_percpu(typeof(*kvm->arch.last_vcpu_ran));
+	if (!kvm->arch.last_vcpu_ran)
+		return -ENOMEM;
+
+	for_each_possible_cpu(cpu)
+		*per_cpu_ptr(kvm->arch.last_vcpu_ran, cpu) = -1;
+
 	ret = kvm_alloc_stage2_pgd(kvm);
 	if (ret)
 		goto out_fail_alloc;
@@ -141,6 +148,8 @@ int kvm_arch_init_vm(struct kvm *kvm, unsigned long type)
 out_free_stage2_pgd:
 	kvm_free_stage2_pgd(kvm);
 out_fail_alloc:
+	free_percpu(kvm->arch.last_vcpu_ran);
+	kvm->arch.last_vcpu_ran = NULL;
 	return ret;
 }
 
@@ -168,6 +177,9 @@ void kvm_arch_destroy_vm(struct kvm *kvm)
 {
 	int i;
 
+	free_percpu(kvm->arch.last_vcpu_ran);
+	kvm->arch.last_vcpu_ran = NULL;
+
 	for (i = 0; i < KVM_MAX_VCPUS; ++i) {
 		if (kvm->vcpus[i]) {
 			kvm_arch_vcpu_free(kvm->vcpus[i]);
@@ -312,6 +324,19 @@ int kvm_arch_vcpu_init(struct kvm_vcpu *vcpu)
 
 void kvm_arch_vcpu_load(struct kvm_vcpu *vcpu, int cpu)
 {
+	int *last_ran;
+
+	last_ran = this_cpu_ptr(vcpu->kvm->arch.last_vcpu_ran);
+
+	/*
+	 * We might get preempted before the vCPU actually runs, but
+	 * over-invalidation doesn't affect correctness.
+	 */
+	if (*last_ran != vcpu->vcpu_id) {
+		kvm_call_hyp(__kvm_tlb_flush_local_vmid, vcpu);
+		*last_ran = vcpu->vcpu_id;
+	}
+
 	vcpu->cpu = cpu;
 	vcpu->arch.host_cpu_context = this_cpu_ptr(kvm_host_cpu_state);
 
@@ -1312,6 +1337,13 @@ static int init_hyp_mode(void)
 		goto out_err;
 	}
 
+	err = create_hyp_mappings(kvm_ksym_ref(__bss_start),
+				  kvm_ksym_ref(__bss_stop), PAGE_HYP_RO);
+	if (err) {
+		kvm_err("Cannot map bss section\n");
+		goto out_err;
+	}
+
 	/*
 	 * Map the Hyp stack pages
 	 */

arch/arm/kvm/hyp/tlb.c

@@ -55,6 +55,21 @@ void __hyp_text __kvm_tlb_flush_vmid_ipa(struct kvm *kvm, phys_addr_t ipa)
 	__kvm_tlb_flush_vmid(kvm);
 }
 
+void __hyp_text __kvm_tlb_flush_local_vmid(struct kvm_vcpu *vcpu)
+{
+	struct kvm *kvm = kern_hyp_va(kern_hyp_va(vcpu)->kvm);
+
+	/* Switch to requested VMID */
+	write_sysreg(kvm->arch.vttbr, VTTBR);
+	isb();
+
+	write_sysreg(0, TLBIALL);
+	dsb(nsh);
+	isb();
+
+	write_sysreg(0, VTTBR);
+}
+
 void __hyp_text __kvm_flush_vm_context(void)
 {
 	write_sysreg(0, TLBIALLNSNHIS);

arch/arm/lib/backtrace.S

@@ -10,6 +10,7 @@
  * 27/03/03 Ian Molton Clean up CONFIG_CPU
  *
  */
+#include <linux/kern_levels.h>
 #include <linux/linkage.h>
 #include <asm/assembler.h>
 		.text
@@ -83,13 +84,13 @@ for_each_frame:	tst	frame, mask		@ Check for address exceptions
 		teq	r3, r1, lsr #11
 		ldreq	r0, [frame, #-8]	@ get sp
 		subeq	r0, r0, #4		@ point at the last arg
-		bleq	.Ldumpstm		@ dump saved registers
+		bleq	dump_backtrace_stm	@ dump saved registers
 
 1004:		ldr	r1, [sv_pc, #0]		@ if stmfd sp!, {..., fp, ip, lr, pc}
 		ldr	r3, .Ldsi		@ instruction exists,
 		teq	r3, r1, lsr #11
 		subeq	r0, frame, #16
-		bleq	.Ldumpstm		@ dump saved registers
+		bleq	dump_backtrace_stm	@ dump saved registers
 
 		teq	sv_fp, #0		@ zero saved fp means
 		beq	no_frame		@ no further frames
@@ -112,38 +113,6 @@ ENDPROC(c_backtrace)
 		.long	1004b, 1006b
 		.popsection
 
-#define instr r4
-#define reg   r5
-#define stack r6
-
-.Ldumpstm:	stmfd	sp!, {instr, reg, stack, r7, lr}
-		mov	stack, r0
-		mov	instr, r1
-		mov	reg, #10
-		mov	r7, #0
-1:		mov	r3, #1
- ARM(		tst	instr, r3, lsl reg	)
- THUMB(		lsl	r3, reg			)
- THUMB(		tst	instr, r3		)
-		beq	2f
-		add	r7, r7, #1
-		teq	r7, #6
-		moveq	r7, #0
-		adr	r3, .Lcr
-		addne	r3, r3, #1		@ skip newline
-		ldr	r2, [stack], #-4
-		mov	r1, reg
-		adr	r0, .Lfp
-		bl	printk
-2:		subs	reg, reg, #1
-		bpl	1b
-		teq	r7, #0
-		adrne	r0, .Lcr
-		blne	printk
-		ldmfd	sp!, {instr, reg, stack, r7, pc}
-
-.Lfp:		.asciz	" r%d:%08x%s"
-.Lcr:		.asciz	"\n"
 .Lbad:		.asciz	"Backtrace aborted due to bad frame pointer <%p>\n"
 		.align
 .Ldsi:		.word	0xe92dd800 >> 11	@ stmfd sp!, {... fp, ip, lr, pc}

arch/arm/mach-imx/gpc.c

@@ -408,7 +408,7 @@ static struct genpd_onecell_data imx_gpc_onecell_data = {
 static int imx_gpc_genpd_init(struct device *dev, struct regulator *pu_reg)
 {
 	struct clk *clk;
-	int i;
+	int i, ret;
 
 	imx6q_pu_domain.reg = pu_reg;
 
@@ -430,13 +430,22 @@ static int imx_gpc_genpd_init(struct device *dev, struct regulator *pu_reg)
 	if (!IS_ENABLED(CONFIG_PM_GENERIC_DOMAINS))
 		return 0;
 
-	pm_genpd_init(&imx6q_pu_domain.base, NULL, false);
-	return of_genpd_add_provider_onecell(dev->of_node,
+	for (i = 0; i < ARRAY_SIZE(imx_gpc_domains); i++)
+		pm_genpd_init(imx_gpc_domains[i], NULL, false);
+
+	ret =  of_genpd_add_provider_onecell(dev->of_node,
 					     &imx_gpc_onecell_data);
+	if (ret)
+		goto power_off;
+
+	return 0;
 
+power_off:
+	imx6q_pm_pu_power_off(&imx6q_pu_domain.base);
 clk_err:
 	while (i--)
 		clk_put(imx6q_pu_domain.clk[i]);
+	imx6q_pu_domain.reg = NULL;
 	return -EINVAL;
 }
 

arch/arm/mach-imx/mach-imx6q.c

@@ -173,7 +173,7 @@ static void __init imx6q_enet_phy_init(void)
 				ksz9021rn_phy_fixup);
 		phy_register_fixup_for_uid(PHY_ID_KSZ9031, MICREL_PHY_ID_MASK,
 				ksz9031rn_phy_fixup);
-		phy_register_fixup_for_uid(PHY_ID_AR8031, 0xffffffff,
+		phy_register_fixup_for_uid(PHY_ID_AR8031, 0xffffffef,
 				ar8031_phy_fixup);
 		phy_register_fixup_for_uid(PHY_ID_AR8035, 0xffffffef,
 				ar8035_phy_fixup);

arch/arm/mach-mvebu/Kconfig

@@ -23,6 +23,7 @@ config MACH_MVEBU_V7
 	select CACHE_L2X0
 	select ARM_CPU_SUSPEND
 	select MACH_MVEBU_ANY
+	select MVEBU_CLK_COREDIV
 
 config MACH_ARMADA_370
 	bool "Marvell Armada 370 boards"
@@ -32,7 +33,6 @@ config MACH_ARMADA_370
 	select CPU_PJ4B
 	select MACH_MVEBU_V7
 	select PINCTRL_ARMADA_370
-	select MVEBU_CLK_COREDIV
 	help
 	  Say 'Y' here if you want your kernel to support boards based
 	  on the Marvell Armada 370 SoC with device tree.
@@ -50,7 +50,6 @@ config MACH_ARMADA_375
 	select HAVE_SMP
 	select MACH_MVEBU_V7
 	select PINCTRL_ARMADA_375
-	select MVEBU_CLK_COREDIV
 	help
 	  Say 'Y' here if you want your kernel to support boards based
 	  on the Marvell Armada 375 SoC with device tree.
@@ -68,7 +67,6 @@ config MACH_ARMADA_38X
 	select HAVE_SMP
 	select MACH_MVEBU_V7
 	select PINCTRL_ARMADA_38X
-	select MVEBU_CLK_COREDIV
 	help
 	  Say 'Y' here if you want your kernel to support boards based
 	  on the Marvell Armada 380/385 SoC with device tree.

arch/arm/mach-omap2/Kconfig

@@ -71,6 +71,7 @@ config SOC_AM43XX
 	select HAVE_ARM_TWD
 	select ARM_ERRATA_754322
 	select ARM_ERRATA_775420
+	select OMAP_INTERCONNECT
 
 config SOC_DRA7XX
 	bool "TI DRA7XX"

arch/arm/mach-omap2/id.c

@@ -205,11 +205,15 @@ void __init omap2xxx_check_revision(void)
 
 #define OMAP3_SHOW_FEATURE(feat)		\
 	if (omap3_has_ ##feat())		\
-		printk(#feat" ");
+		n += scnprintf(buf + n, sizeof(buf) - n, #feat " ");
 
 static void __init omap3_cpuinfo(void)
 {
 	const char *cpu_name;
+	char buf[64];
+	int n = 0;
+
+	memset(buf, 0, sizeof(buf));
 
 	/*
 	 * OMAP3430 and OMAP3530 are assumed to be same.
@@ -241,10 +245,10 @@ static void __init omap3_cpuinfo(void)
 		cpu_name = "OMAP3503";
 	}
 
-	sprintf(soc_name, "%s", cpu_name);
+	scnprintf(soc_name, sizeof(soc_name), "%s", cpu_name);
 
 	/* Print verbose information */
-	pr_info("%s %s (", soc_name, soc_rev);
+	n += scnprintf(buf, sizeof(buf) - n, "%s %s (", soc_name, soc_rev);
 
 	OMAP3_SHOW_FEATURE(l2cache);
 	OMAP3_SHOW_FEATURE(iva);
@@ -252,8 +256,10 @@ static void __init omap3_cpuinfo(void)
 	OMAP3_SHOW_FEATURE(neon);
 	OMAP3_SHOW_FEATURE(isp);
 	OMAP3_SHOW_FEATURE(192mhz_clk);
-
-	printk(")\n");
+	if (*(buf + n - 1) == ' ')
+		n--;
+	n += scnprintf(buf + n, sizeof(buf) - n, ")\n");
+	pr_info("%s", buf);
 }
 
 #define OMAP3_CHECK_FEATURE(status,feat)				\

arch/arm/mach-omap2/prm3xxx.c

@@ -319,6 +319,9 @@ void __init omap3_prm_init_pm(bool has_uart4, bool has_iva)
 	if (has_uart4) {
 		en_uart4_mask = OMAP3630_EN_UART4_MASK;
 		grpsel_uart4_mask = OMAP3630_GRPSEL_UART4_MASK;
+	} else {
+		en_uart4_mask = 0;
+		grpsel_uart4_mask = 0;
 	}
 
 	/* Enable wakeups in PER */

arch/arm/mach-omap2/voltage.c

@@ -87,6 +87,12 @@ int voltdm_scale(struct voltagedomain *voltdm,
 		return -ENODATA;
 	}
 
+	if (!voltdm->volt_data) {
+		pr_err("%s: No voltage data defined for vdd_%s\n",
+			__func__, voltdm->name);
+		return -ENODATA;
+	}
+
 	/* Adjust voltage to the exact voltage from the OPP table */
 	for (i = 0; voltdm->volt_data[i].volt_nominal != 0; i++) {
 		if (voltdm->volt_data[i].volt_nominal >= target_volt) {

arch/arm/mach-uniphier/Kconfig

@@ -1,6 +1,7 @@
 config ARCH_UNIPHIER
 	bool "Socionext UniPhier SoCs"
 	depends on ARCH_MULTI_V7
+	select ARCH_HAS_RESET_CONTROLLER
 	select ARM_AMBA
 	select ARM_GLOBAL_TIMER
 	select ARM_GIC

arch/arm/mm/abort-lv4t.S

@@ -7,7 +7,7 @@
  *	   : r4 = aborted context pc
  *	   : r5 = aborted context psr
  *
- * Returns : r4-r5, r10-r11, r13 preserved
+ * Returns : r4-r5, r9-r11, r13 preserved
  *
  * Purpose : obtain information about current aborted instruction.
  * Note: we read user space.  This means we might cause a data
@@ -48,7 +48,10 @@ ENTRY(v4t_late_abort)
 /* c */	b	do_DataAbort			@ ldc	rd, [rn], #m	@ Same as ldr	rd, [rn], #m
 /* d */	b	do_DataAbort			@ ldc	rd, [rn, #m]
 /* e */	b	.data_unknown
-/* f */
+/* f */	b	.data_unknown
+
+.data_unknown_r9:
+	ldr	r9, [sp], #4
 .data_unknown:	@ Part of jumptable
 	mov	r0, r4
 	mov	r1, r8
@@ -57,6 +60,7 @@ ENTRY(v4t_late_abort)
 .data_arm_ldmstm:
 	tst	r8, #1 << 21			@ check writeback bit
 	beq	do_DataAbort			@ no writeback -> no fixup
+	str	r9, [sp, #-4]!
 	mov	r7, #0x11
 	orr	r7, r7, #0x1100
 	and	r6, r8, r7
@@ -75,12 +79,14 @@ ENTRY(v4t_late_abort)
 	subne	r7, r7, r6, lsl #2		@ Undo increment
 	addeq	r7, r7, r6, lsl #2		@ Undo decrement
 	str	r7, [r2, r9, lsr #14]		@ Put register 'Rn'
+	ldr	r9, [sp], #4
 	b	do_DataAbort
 
 .data_arm_lateldrhpre:
 	tst	r8, #1 << 21			@ Check writeback bit
 	beq	do_DataAbort			@ No writeback -> no fixup
 .data_arm_lateldrhpost:
+	str	r9, [sp, #-4]!
 	and	r9, r8, #0x00f			@ get Rm / low nibble of immediate value
 	tst	r8, #1 << 22			@ if (immediate offset)
 	andne	r6, r8, #0xf00			@ { immediate high nibble
@@ -93,6 +99,7 @@ ENTRY(v4t_late_abort)
 	subne	r7, r7, r6			@ Undo incrmenet
 	addeq	r7, r7, r6			@ Undo decrement
 	str	r7, [r2, r9, lsr #14]		@ Put register 'Rn'
+	ldr	r9, [sp], #4
 	b	do_DataAbort
 
 .data_arm_lateldrpreconst:
@@ -101,12 +108,14 @@ ENTRY(v4t_late_abort)
 .data_arm_lateldrpostconst:
 	movs	r6, r8, lsl #20			@ Get offset
 	beq	do_DataAbort			@ zero -> no fixup
+	str	r9, [sp, #-4]!
 	and	r9, r8, #15 << 16		@ Extract 'n' from instruction
 	ldr	r7, [r2, r9, lsr #14]		@ Get register 'Rn'
 	tst	r8, #1 << 23			@ Check U bit
 	subne	r7, r7, r6, lsr #20		@ Undo increment
 	addeq	r7, r7, r6, lsr #20		@ Undo decrement
 	str	r7, [r2, r9, lsr #14]		@ Put register 'Rn'
+	ldr	r9, [sp], #4
 	b	do_DataAbort
 
 .data_arm_lateldrprereg:
@@ -115,6 +124,7 @@ ENTRY(v4t_late_abort)
 .data_arm_lateldrpostreg:
 	and	r7, r8, #15			@ Extract 'm' from instruction
 	ldr	r6, [r2, r7, lsl #2]		@ Get register 'Rm'
+	str	r9, [sp, #-4]!
 	mov	r9, r8, lsr #7			@ get shift count
 	ands	r9, r9, #31
 	and	r7, r8, #0x70			@ get shift type
@@ -126,33 +136,33 @@ ENTRY(v4t_late_abort)
 	b	.data_arm_apply_r6_and_rn
 	b	.data_arm_apply_r6_and_rn	@ 1: LSL #0
 	nop
-	b	.data_unknown			@ 2: MUL?
+	b	.data_unknown_r9		@ 2: MUL?
 	nop
-	b	.data_unknown			@ 3: MUL?
+	b	.data_unknown_r9		@ 3: MUL?
 	nop
 	mov	r6, r6, lsr r9			@ 4: LSR #!0
 	b	.data_arm_apply_r6_and_rn
 	mov	r6, r6, lsr #32			@ 5: LSR #32
 	b	.data_arm_apply_r6_and_rn
-	b	.data_unknown			@ 6: MUL?
+	b	.data_unknown_r9		@ 6: MUL?
 	nop
-	b	.data_unknown			@ 7: MUL?
+	b	.data_unknown_r9		@ 7: MUL?
 	nop
 	mov	r6, r6, asr r9			@ 8: ASR #!0
 	b	.data_arm_apply_r6_and_rn
 	mov	r6, r6, asr #32			@ 9: ASR #32
 	b	.data_arm_apply_r6_and_rn
-	b	.data_unknown			@ A: MUL?
+	b	.data_unknown_r9		@ A: MUL?
 	nop
-	b	.data_unknown			@ B: MUL?
+	b	.data_unknown_r9		@ B: MUL?
 	nop
 	mov	r6, r6, ror r9			@ C: ROR #!0
 	b	.data_arm_apply_r6_and_rn
 	mov	r6, r6, rrx			@ D: RRX
 	b	.data_arm_apply_r6_and_rn
-	b	.data_unknown			@ E: MUL?
+	b	.data_unknown_r9		@ E: MUL?
 	nop
-	b	.data_unknown			@ F: MUL?
+	b	.data_unknown_r9		@ F: MUL?
 
 .data_thumb_abort:
 	ldrh	r8, [r4]			@ read instruction
@@ -190,6 +200,7 @@ ENTRY(v4t_late_abort)
 .data_thumb_pushpop:
 	tst	r8, #1 << 10
 	beq	.data_unknown
+	str	r9, [sp, #-4]!
 	and	r6, r8, #0x55			@ hweight8(r8) + R bit
 	and	r9, r8, #0xaa
 	add	r6, r6, r9, lsr #1
@@ -204,9 +215,11 @@ ENTRY(v4t_late_abort)
 	addeq	r7, r7, r6, lsl #2		@ increment SP if PUSH
 	subne	r7, r7, r6, lsl #2		@ decrement SP if POP
 	str	r7, [r2, #13 << 2]
+	ldr	r9, [sp], #4
 	b	do_DataAbort
 
 .data_thumb_ldmstm:
+	str	r9, [sp, #-4]!
 	and	r6, r8, #0x55			@ hweight8(r8)
 	and	r9, r8, #0xaa
 	add	r6, r6, r9, lsr #1
@@ -219,4 +232,5 @@ ENTRY(v4t_late_abort)
 	and	r6, r6, #15			@ number of regs to transfer
 	sub	r7, r7, r6, lsl #2		@ always decrement
 	str	r7, [r2, r9, lsr #6]
+	ldr	r9, [sp], #4
 	b	do_DataAbort

arch/arm/mm/dma-mapping.c

@@ -1167,7 +1167,7 @@ static int __init dma_debug_do_init(void)
 	dma_debug_init(PREALLOC_DMA_DEBUG_ENTRIES);
 	return 0;
 }
-fs_initcall(dma_debug_do_init);
+core_initcall(dma_debug_do_init);
 
 #ifdef CONFIG_ARM_DMA_USE_IOMMU
 

arch/arm/mm/proc-v7m.S

@@ -96,7 +96,7 @@ ENTRY(cpu_cm7_proc_fin)
 	ret	lr
 ENDPROC(cpu_cm7_proc_fin)
 
-	.section ".text.init", #alloc, #execinstr
+	.section ".init.text", #alloc, #execinstr
 
 __v7m_cm7_setup:
 	mov	r8, #(V7M_SCB_CCR_DC | V7M_SCB_CCR_IC| V7M_SCB_CCR_BP)

arch/arm64/Kconfig

@@ -915,7 +915,7 @@ config RANDOMIZE_BASE
 
 config RANDOMIZE_MODULE_REGION_FULL
 	bool "Randomize the module region independently from the core kernel"
-	depends on RANDOMIZE_BASE
+	depends on RANDOMIZE_BASE && !DYNAMIC_FTRACE
 	default y
 	help
 	  Randomizes the location of the module region without considering the

arch/arm64/Kconfig.platforms

@@ -190,6 +190,7 @@ config ARCH_THUNDER
 
 config ARCH_UNIPHIER
 	bool "Socionext UniPhier SoC Family"
+	select ARCH_HAS_RESET_CONTROLLER
 	select PINCTRL
 	help
 	  This enables support for Socionext UniPhier SoC family.