Merge branch 'dma_mb'

Alexander Duyck says:

====================
arch: Add lightweight memory barriers for coherent memory access

These patches introduce two new primitives for synchronizing cache coherent
memory writes and reads.  These two new primitives are:

	dma_rmb()
	dma_wmb()

The first patch cleans up some unnecessary overhead related to the
definition of read_barrier_depends, smp_read_barrier_depends, and comments
related to the barrier.

The second patch adds the primitives for the applicable architectures and
asm-generic.

The third patch adds the barriers to r8169 which turns out to be a good
example of where the new barriers might be useful as they have full
rmb()/wmb() barriers ordering accesses to the descriptors and the DescOwn
bit.

The fourth patch adds support for coherent_rmb() to the Intel fm10k, igb,
and ixgbe drivers.  Testing with the ixgbe driver has shown a processing
time reduction of at least 7ns per 64B frame on a Core i7-4930K.

This patch series is essentially the v7 for:
v4-7:	Add lightweight memory barriers for coherent memory access
v3:	Add lightweight memory barriers fast_rmb() and fast_wmb()
v2:	Introduce load_acquire() and store_release()
v1:	Introduce read_acquire()

The key changes in this patch series versus the earlier patches are:
v7 resubmit:
	- Added Acked-by: Ben Herrenschmidt from v5 to dma_rmb/wmb patch
	- No code changes from previous set, still applies cleanly and builds.
v7:
	- Dropped test/debug patch that was accidentally slipped in
v6:
	- Replaced "memory based device I/O" with "consistent memory" in
	  docs
	- Added reference to DMA-API.txt to explain consistent memory
v5:
	- Renamed barriers dma_rmb and dma_wmb
	- Undid smp_wmb changes in x86 and PowerPC
	- Defined smp_rmb as __lwsync for SMP case on PowerPC
v4:
	- Renamed barriers coherent_rmb and coherent_wmb
	- Added smp_lwsync for use in smp_load_acquire/smp_store_release
v3:
	- Moved away from acquire()/store() and instead focused on barriers
	- Added cleanup of read_barrier_depends
	- Added change in r8169 to fix cur_tx/DescOwn ordering
	- Simplified changes to just replacing/moving barriers in r8169
	- Added update to documentation with code example
v2:
	- Renamed read_acquire() to be consistent with smp_load_acquire()
	- Changed barrier used to be consistent with smp_load_acquire()
	- Updated PowerPC code to use __lwsync based on IBM article
	- Added store_release() as this is a viable use case for drivers
	- Added r8169 patch which is able to fully use primitives
	- Added fm10k/igb/ixgbe patch which is able to test performance
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

Documentation/memory-barriers.txt

@@ -1633,6 +1633,48 @@ There are some more advanced barrier functions:
      operations" subsection for information on where to use these.
 
 
+ (*) dma_wmb();
+ (*) dma_rmb();
+
+     These are for use with consistent memory to guarantee the ordering
+     of writes or reads of shared memory accessible to both the CPU and a
+     DMA capable device.
+
+     For example, consider a device driver that shares memory with a device
+     and uses a descriptor status value to indicate if the descriptor belongs
+     to the device or the CPU, and a doorbell to notify it when new
+     descriptors are available:
+
+	if (desc->status != DEVICE_OWN) {
+		/* do not read data until we own descriptor */
+		dma_rmb();
+
+		/* read/modify data */
+		read_data = desc->data;
+		desc->data = write_data;
+
+		/* flush modifications before status update */
+		dma_wmb();
+
+		/* assign ownership */
+		desc->status = DEVICE_OWN;
+
+		/* force memory to sync before notifying device via MMIO */
+		wmb();
+
+		/* notify device of new descriptors */
+		writel(DESC_NOTIFY, doorbell);
+	}
+
+     The dma_rmb() allows us guarantee the device has released ownership
+     before we read the data from the descriptor, and he dma_wmb() allows
+     us to guarantee the data is written to the descriptor before the device
+     can see it now has ownership.  The wmb() is needed to guarantee that the
+     cache coherent memory writes have completed before attempting a write to
+     the cache incoherent MMIO region.
+
+     See Documentation/DMA-API.txt for more information on consistent memory.
+
 MMIO WRITE BARRIER
 ------------------
 

arch/alpha/include/asm/barrier.h

@@ -7,6 +7,57 @@
 #define rmb()	__asm__ __volatile__("mb": : :"memory")
 #define wmb()	__asm__ __volatile__("wmb": : :"memory")
 
+/**
+ * read_barrier_depends - Flush all pending reads that subsequents reads
+ * depend on.
+ *
+ * No data-dependent reads from memory-like regions are ever reordered
+ * over this barrier.  All reads preceding this primitive are guaranteed
+ * to access memory (but not necessarily other CPUs' caches) before any
+ * reads following this primitive that depend on the data return by
+ * any of the preceding reads.  This primitive is much lighter weight than
+ * rmb() on most CPUs, and is never heavier weight than is
+ * rmb().
+ *
+ * These ordering constraints are respected by both the local CPU
+ * and the compiler.
+ *
+ * Ordering is not guaranteed by anything other than these primitives,
+ * not even by data dependencies.  See the documentation for
+ * memory_barrier() for examples and URLs to more information.
+ *
+ * For example, the following code would force ordering (the initial
+ * value of "a" is zero, "b" is one, and "p" is "&a"):
+ *
+ * <programlisting>
+ *	CPU 0				CPU 1
+ *
+ *	b = 2;
+ *	memory_barrier();
+ *	p = &b;				q = p;
+ *					read_barrier_depends();
+ *					d = *q;
+ * </programlisting>
+ *
+ * because the read of "*q" depends on the read of "p" and these
+ * two reads are separated by a read_barrier_depends().  However,
+ * the following code, with the same initial values for "a" and "b":
+ *
+ * <programlisting>
+ *	CPU 0				CPU 1
+ *
+ *	a = 2;
+ *	memory_barrier();
+ *	b = 3;				y = b;
+ *					read_barrier_depends();
+ *					x = a;
+ * </programlisting>
+ *
+ * does not enforce ordering, since there is no data dependency between
+ * the read of "a" and the read of "b".  Therefore, on some CPUs, such
+ * as Alpha, "y" could be set to 3 and "x" to 0.  Use rmb()
+ * in cases like this where there are no data dependencies.
+ */
 #define read_barrier_depends() __asm__ __volatile__("mb": : :"memory")
 
 #ifdef CONFIG_SMP

arch/arm/include/asm/barrier.h

@@ -43,10 +43,14 @@
 #define mb()		do { dsb(); outer_sync(); } while (0)
 #define rmb()		dsb()
 #define wmb()		do { dsb(st); outer_sync(); } while (0)
+#define dma_rmb()	dmb(osh)
+#define dma_wmb()	dmb(oshst)
 #else
 #define mb()		barrier()
 #define rmb()		barrier()
 #define wmb()		barrier()
+#define dma_rmb()	barrier()
+#define dma_wmb()	barrier()
 #endif
 
 #ifndef CONFIG_SMP

arch/arm64/include/asm/barrier.h

@@ -32,6 +32,9 @@
 #define rmb()		dsb(ld)
 #define wmb()		dsb(st)
 
+#define dma_rmb()	dmb(oshld)
+#define dma_wmb()	dmb(oshst)
+
 #ifndef CONFIG_SMP
 #define smp_mb()	barrier()
 #define smp_rmb()	barrier()

arch/blackfin/include/asm/barrier.h

@@ -22,6 +22,57 @@
 # define mb()	do { barrier(); smp_check_barrier(); smp_mark_barrier(); } while (0)
 # define rmb()	do { barrier(); smp_check_barrier(); } while (0)
 # define wmb()	do { barrier(); smp_mark_barrier(); } while (0)
+/*
+ * read_barrier_depends - Flush all pending reads that subsequents reads
+ * depend on.
+ *
+ * No data-dependent reads from memory-like regions are ever reordered
+ * over this barrier.  All reads preceding this primitive are guaranteed
+ * to access memory (but not necessarily other CPUs' caches) before any
+ * reads following this primitive that depend on the data return by
+ * any of the preceding reads.  This primitive is much lighter weight than
+ * rmb() on most CPUs, and is never heavier weight than is
+ * rmb().
+ *
+ * These ordering constraints are respected by both the local CPU
+ * and the compiler.
+ *
+ * Ordering is not guaranteed by anything other than these primitives,
+ * not even by data dependencies.  See the documentation for
+ * memory_barrier() for examples and URLs to more information.
+ *
+ * For example, the following code would force ordering (the initial
+ * value of "a" is zero, "b" is one, and "p" is "&a"):
+ *
+ * <programlisting>
+ *	CPU 0				CPU 1
+ *
+ *	b = 2;
+ *	memory_barrier();
+ *	p = &b;				q = p;
+ *					read_barrier_depends();
+ *					d = *q;
+ * </programlisting>
+ *
+ * because the read of "*q" depends on the read of "p" and these
+ * two reads are separated by a read_barrier_depends().  However,
+ * the following code, with the same initial values for "a" and "b":
+ *
+ * <programlisting>
+ *	CPU 0				CPU 1
+ *
+ *	a = 2;
+ *	memory_barrier();
+ *	b = 3;				y = b;
+ *					read_barrier_depends();
+ *					x = a;
+ * </programlisting>
+ *
+ * does not enforce ordering, since there is no data dependency between
+ * the read of "a" and the read of "b".  Therefore, on some CPUs, such
+ * as Alpha, "y" could be set to 3 and "x" to 0.  Use rmb()
+ * in cases like this where there are no data dependencies.
+ */
 # define read_barrier_depends()	do { barrier(); smp_check_barrier(); } while (0)
 #endif
 

arch/ia64/include/asm/barrier.h

@@ -35,26 +35,25 @@
  * it's (presumably) much slower than mf and (b) mf.a is supported for
  * sequential memory pages only.
  */
-#define mb()	ia64_mf()
-#define rmb()	mb()
-#define wmb()	mb()
-#define read_barrier_depends()	do { } while(0)
+#define mb()		ia64_mf()
+#define rmb()		mb()
+#define wmb()		mb()
+
+#define dma_rmb()	mb()
+#define dma_wmb()	mb()
 
 #ifdef CONFIG_SMP
 # define smp_mb()	mb()
-# define smp_rmb()	rmb()
-# define smp_wmb()	wmb()
-# define smp_read_barrier_depends()	read_barrier_depends()
-
 #else
-
 # define smp_mb()	barrier()
-# define smp_rmb()	barrier()
-# define smp_wmb()	barrier()
-# define smp_read_barrier_depends()	do { } while(0)
-
 #endif
 
+#define smp_rmb()	smp_mb()
+#define smp_wmb()	smp_mb()
+
+#define read_barrier_depends()		do { } while (0)
+#define smp_read_barrier_depends()	do { } while (0)
+
 #define smp_mb__before_atomic()	barrier()
 #define smp_mb__after_atomic()	barrier()
 

arch/metag/include/asm/barrier.h

@@ -4,8 +4,6 @@
 #include <asm/metag_mem.h>
 
 #define nop()		asm volatile ("NOP")
-#define mb()		wmb()
-#define rmb()		barrier()
 
 #ifdef CONFIG_METAG_META21
 
@@ -41,13 +39,13 @@ static inline void wr_fence(void)
 
 #endif /* !CONFIG_METAG_META21 */
 
-static inline void wmb(void)
-{
-	/* flush writes through the write combiner */
-	wr_fence();
-}
+/* flush writes through the write combiner */
+#define mb()		wr_fence()
+#define rmb()		barrier()
+#define wmb()		mb()
 
-#define read_barrier_depends()  do { } while (0)
+#define dma_rmb()	rmb()
+#define dma_wmb()	wmb()
 
 #ifndef CONFIG_SMP
 #define fence()		do { } while (0)
@@ -82,7 +80,10 @@ static inline void fence(void)
 #define smp_wmb()       barrier()
 #endif
 #endif
-#define smp_read_barrier_depends()     do { } while (0)
+
+#define read_barrier_depends()		do { } while (0)
+#define smp_read_barrier_depends()	do { } while (0)
+
 #define set_mb(var, value) do { var = value; smp_mb(); } while (0)
 
 #define smp_store_release(p, v)						\

arch/mips/include/asm/barrier.h

@@ -10,58 +10,6 @@
 
 #include <asm/addrspace.h>
 
-/*
- * read_barrier_depends - Flush all pending reads that subsequents reads
- * depend on.
- *
- * No data-dependent reads from memory-like regions are ever reordered
- * over this barrier.  All reads preceding this primitive are guaranteed
- * to access memory (but not necessarily other CPUs' caches) before any
- * reads following this primitive that depend on the data return by
- * any of the preceding reads.  This primitive is much lighter weight than
- * rmb() on most CPUs, and is never heavier weight than is
- * rmb().
- *
- * These ordering constraints are respected by both the local CPU
- * and the compiler.
- *
- * Ordering is not guaranteed by anything other than these primitives,
- * not even by data dependencies.  See the documentation for
- * memory_barrier() for examples and URLs to more information.
- *
- * For example, the following code would force ordering (the initial
- * value of "a" is zero, "b" is one, and "p" is "&a"):
- *
- * <programlisting>
- *	CPU 0				CPU 1
- *
- *	b = 2;
- *	memory_barrier();
- *	p = &b;				q = p;
- *					read_barrier_depends();
- *					d = *q;
- * </programlisting>
- *
- * because the read of "*q" depends on the read of "p" and these
- * two reads are separated by a read_barrier_depends().  However,
- * the following code, with the same initial values for "a" and "b":
- *
- * <programlisting>
- *	CPU 0				CPU 1
- *
- *	a = 2;
- *	memory_barrier();
- *	b = 3;				y = b;
- *					read_barrier_depends();
- *					x = a;
- * </programlisting>
- *
- * does not enforce ordering, since there is no data dependency between
- * the read of "a" and the read of "b".  Therefore, on some CPUs, such
- * as Alpha, "y" could be set to 3 and "x" to 0.  Use rmb()
- * in cases like this where there are no data dependencies.
- */
-
 #define read_barrier_depends()		do { } while(0)
 #define smp_read_barrier_depends()	do { } while(0)
 
@@ -127,20 +75,21 @@
 
 #include <asm/wbflush.h>
 
-#define wmb()		fast_wmb()
-#define rmb()		fast_rmb()
 #define mb()		wbflush()
 #define iob()		wbflush()
 
 #else /* !CONFIG_CPU_HAS_WB */
 
-#define wmb()		fast_wmb()
-#define rmb()		fast_rmb()
 #define mb()		fast_mb()
 #define iob()		fast_iob()
 
 #endif /* !CONFIG_CPU_HAS_WB */
 
+#define wmb()		fast_wmb()
+#define rmb()		fast_rmb()
+#define dma_wmb()	fast_wmb()
+#define dma_rmb()	fast_rmb()
+
 #if defined(CONFIG_WEAK_ORDERING) && defined(CONFIG_SMP)
 # ifdef CONFIG_CPU_CAVIUM_OCTEON
 #  define smp_mb()	__sync()

arch/powerpc/include/asm/barrier.h

@@ -33,12 +33,9 @@
 #define mb()   __asm__ __volatile__ ("sync" : : : "memory")
 #define rmb()  __asm__ __volatile__ ("sync" : : : "memory")
 #define wmb()  __asm__ __volatile__ ("sync" : : : "memory")
-#define read_barrier_depends()  do { } while(0)
 
 #define set_mb(var, value)	do { var = value; mb(); } while (0)
 
-#ifdef CONFIG_SMP
-
 #ifdef __SUBARCH_HAS_LWSYNC
 #    define SMPWMB      LWSYNC
 #else
@@ -46,20 +43,26 @@
 #endif
 
 #define __lwsync()	__asm__ __volatile__ (stringify_in_c(LWSYNC) : : :"memory")
+#define dma_rmb()	__lwsync()
+#define dma_wmb()	__asm__ __volatile__ (stringify_in_c(SMPWMB) : : :"memory")
+
+#ifdef CONFIG_SMP
+#define smp_lwsync()	__lwsync()
 
 #define smp_mb()	mb()
 #define smp_rmb()	__lwsync()
 #define smp_wmb()	__asm__ __volatile__ (stringify_in_c(SMPWMB) : : :"memory")
-#define smp_read_barrier_depends()	read_barrier_depends()
 #else
-#define __lwsync()	barrier()
+#define smp_lwsync()	barrier()
 
 #define smp_mb()	barrier()
 #define smp_rmb()	barrier()
 #define smp_wmb()	barrier()
-#define smp_read_barrier_depends()	do { } while(0)
 #endif /* CONFIG_SMP */
 
+#define read_barrier_depends()		do { } while (0)
+#define smp_read_barrier_depends()	do { } while (0)
+
 /*
  * This is a barrier which prevents following instructions from being
  * started until the value of the argument x is known.  For example, if
@@ -72,7 +75,7 @@
 #define smp_store_release(p, v)						\
 do {									\
 	compiletime_assert_atomic_type(*p);				\
-	__lwsync();							\
+	smp_lwsync();							\
 	ACCESS_ONCE(*p) = (v);						\
 } while (0)
 
@@ -80,7 +83,7 @@ do {									\
 ({									\
 	typeof(*p) ___p1 = ACCESS_ONCE(*p);				\
 	compiletime_assert_atomic_type(*p);				\
-	__lwsync();							\
+	smp_lwsync();							\
 	___p1;								\
 })
 

arch/s390/include/asm/barrier.h

@@ -24,11 +24,14 @@
 
 #define rmb()				mb()
 #define wmb()				mb()
-#define read_barrier_depends()		do { } while(0)
+#define dma_rmb()			rmb()
+#define dma_wmb()			wmb()
 #define smp_mb()			mb()
 #define smp_rmb()			rmb()
 #define smp_wmb()			wmb()
-#define smp_read_barrier_depends()	read_barrier_depends()
+
+#define read_barrier_depends()		do { } while (0)
+#define smp_read_barrier_depends()	do { } while (0)
 
 #define smp_mb__before_atomic()		smp_mb()
 #define smp_mb__after_atomic()		smp_mb()

arch/sparc/include/asm/barrier_64.h

@@ -37,7 +37,9 @@ do {	__asm__ __volatile__("ba,pt	%%xcc, 1f\n\t" \
 #define rmb()	__asm__ __volatile__("":::"memory")
 #define wmb()	__asm__ __volatile__("":::"memory")
 
-#define read_barrier_depends()		do { } while(0)
+#define dma_rmb()	rmb()
+#define dma_wmb()	wmb()
+
 #define set_mb(__var, __value) \
 	do { __var = __value; membar_safe("#StoreLoad"); } while(0)
 
@@ -51,7 +53,8 @@ do {	__asm__ __volatile__("ba,pt	%%xcc, 1f\n\t" \
 #define smp_wmb()	__asm__ __volatile__("":::"memory")
 #endif
 
-#define smp_read_barrier_depends()	do { } while(0)
+#define read_barrier_depends()		do { } while (0)
+#define smp_read_barrier_depends()	do { } while (0)
 
 #define smp_store_release(p, v)						\
 do {									\

arch/x86/include/asm/barrier.h

@@ -24,78 +24,28 @@
 #define wmb()	asm volatile("sfence" ::: "memory")
 #endif
 
-/**
- * read_barrier_depends - Flush all pending reads that subsequents reads
- * depend on.
- *
- * No data-dependent reads from memory-like regions are ever reordered
- * over this barrier.  All reads preceding this primitive are guaranteed
- * to access memory (but not necessarily other CPUs' caches) before any
- * reads following this primitive that depend on the data return by
- * any of the preceding reads.  This primitive is much lighter weight than
- * rmb() on most CPUs, and is never heavier weight than is
- * rmb().
- *
- * These ordering constraints are respected by both the local CPU
- * and the compiler.
- *
- * Ordering is not guaranteed by anything other than these primitives,
- * not even by data dependencies.  See the documentation for
- * memory_barrier() for examples and URLs to more information.
- *
- * For example, the following code would force ordering (the initial
- * value of "a" is zero, "b" is one, and "p" is "&a"):
- *
- * <programlisting>
- *	CPU 0				CPU 1
- *
- *	b = 2;
- *	memory_barrier();
- *	p = &b;				q = p;
- *					read_barrier_depends();
- *					d = *q;
- * </programlisting>
- *
- * because the read of "*q" depends on the read of "p" and these
- * two reads are separated by a read_barrier_depends().  However,
- * the following code, with the same initial values for "a" and "b":
- *
- * <programlisting>
- *	CPU 0				CPU 1
- *
- *	a = 2;
- *	memory_barrier();
- *	b = 3;				y = b;
- *					read_barrier_depends();
- *					x = a;
- * </programlisting>
- *
- * does not enforce ordering, since there is no data dependency between
- * the read of "a" and the read of "b".  Therefore, on some CPUs, such
- * as Alpha, "y" could be set to 3 and "x" to 0.  Use rmb()
- * in cases like this where there are no data dependencies.
- **/
-
-#define read_barrier_depends()	do { } while (0)
-
-#ifdef CONFIG_SMP
-#define smp_mb()	mb()
 #ifdef CONFIG_X86_PPRO_FENCE
-# define smp_rmb()	rmb()
+#define dma_rmb()	rmb()
 #else
-# define smp_rmb()	barrier()
+#define dma_rmb()	barrier()
 #endif
+#define dma_wmb()	barrier()
+
+#ifdef CONFIG_SMP
+#define smp_mb()	mb()
+#define smp_rmb()	dma_rmb()
 #define smp_wmb()	barrier()
-#define smp_read_barrier_depends()	read_barrier_depends()
 #define set_mb(var, value) do { (void)xchg(&var, value); } while (0)
 #else /* !SMP */
 #define smp_mb()	barrier()
 #define smp_rmb()	barrier()
 #define smp_wmb()	barrier()
-#define smp_read_barrier_depends()	do { } while (0)
 #define set_mb(var, value) do { var = value; barrier(); } while (0)
 #endif /* SMP */
 
+#define read_barrier_depends()		do { } while (0)
+#define smp_read_barrier_depends()	do { } while (0)
+
 #if defined(CONFIG_X86_PPRO_FENCE)
 
 /*

arch/x86/um/asm/barrier.h

@@ -29,20 +29,18 @@
 
 #endif /* CONFIG_X86_32 */
 
-#define read_barrier_depends()	do { } while (0)
-
-#ifdef CONFIG_SMP
-
-#define smp_mb()	mb()
 #ifdef CONFIG_X86_PPRO_FENCE
-#define smp_rmb()	rmb()
+#define dma_rmb()	rmb()
 #else /* CONFIG_X86_PPRO_FENCE */
-#define smp_rmb()	barrier()
+#define dma_rmb()	barrier()
 #endif /* CONFIG_X86_PPRO_FENCE */
+#define dma_wmb()	barrier()
 
-#define smp_wmb()	barrier()
+#ifdef CONFIG_SMP
 
-#define smp_read_barrier_depends()	read_barrier_depends()
+#define smp_mb()	mb()
+#define smp_rmb()	dma_rmb()
+#define smp_wmb()	barrier()
 #define set_mb(var, value) do { (void)xchg(&var, value); } while (0)
 
 #else /* CONFIG_SMP */
@@ -50,11 +48,13 @@
 #define smp_mb()	barrier()
 #define smp_rmb()	barrier()
 #define smp_wmb()	barrier()
-#define smp_read_barrier_depends()	do { } while (0)
 #define set_mb(var, value) do { var = value; barrier(); } while (0)
 
 #endif /* CONFIG_SMP */
 
+#define read_barrier_depends()		do { } while (0)
+#define smp_read_barrier_depends()	do { } while (0)
+
 /*
  * Stop RDTSC speculation. This is needed when you need to use RDTSC
  * (or get_cycles or vread that possibly accesses the TSC) in a defined

drivers/net/ethernet/intel/fm10k/fm10k_main.c

@@ -615,14 +615,14 @@ static bool fm10k_clean_rx_irq(struct fm10k_q_vector *q_vector,
 
 		rx_desc = FM10K_RX_DESC(rx_ring, rx_ring->next_to_clean);
 
-		if (!fm10k_test_staterr(rx_desc, FM10K_RXD_STATUS_DD))
+		if (!rx_desc->d.staterr)
 			break;
 
 		/* This memory barrier is needed to keep us from reading
 		 * any other fields out of the rx_desc until we know the
-		 * RXD_STATUS_DD bit is set
+		 * descriptor has been written back
 		 */
-		rmb();
+		dma_rmb();
 
 		/* retrieve a buffer from the ring */
 		skb = fm10k_fetch_rx_buffer(rx_ring, rx_desc, skb);

drivers/net/ethernet/intel/igb/igb_main.c

@@ -6910,14 +6910,14 @@ static bool igb_clean_rx_irq(struct igb_q_vector *q_vector, const int budget)
 
 		rx_desc = IGB_RX_DESC(rx_ring, rx_ring->next_to_clean);
 
-		if (!igb_test_staterr(rx_desc, E1000_RXD_STAT_DD))
+		if (!rx_desc->wb.upper.status_error)
 			break;
 
 		/* This memory barrier is needed to keep us from reading
 		 * any other fields out of the rx_desc until we know the
-		 * RXD_STAT_DD bit is set
+		 * descriptor has been written back
 		 */
-		rmb();
+		dma_rmb();
 
 		/* retrieve a buffer from the ring */
 		skb = igb_fetch_rx_buffer(rx_ring, rx_desc, skb);

drivers/net/ethernet/intel/ixgbe/ixgbe_main.c

@@ -2009,15 +2009,14 @@ static int ixgbe_clean_rx_irq(struct ixgbe_q_vector *q_vector,
 
 		rx_desc = IXGBE_RX_DESC(rx_ring, rx_ring->next_to_clean);
 
-		if (!ixgbe_test_staterr(rx_desc, IXGBE_RXD_STAT_DD))
+		if (!rx_desc->wb.upper.status_error)
 			break;
 
-		/*
-		 * This memory barrier is needed to keep us from reading
+		/* This memory barrier is needed to keep us from reading
 		 * any other fields out of the rx_desc until we know the
-		 * RXD_STAT_DD bit is set
+		 * descriptor has been written back
 		 */
-		rmb();
+		dma_rmb();
 
 		/* retrieve a buffer from the ring */
 		skb = ixgbe_fetch_rx_buffer(rx_ring, rx_desc);

drivers/net/ethernet/realtek/r8169.c

@@ -6605,6 +6605,9 @@ static inline void rtl8169_mark_to_asic(struct RxDesc *desc, u32 rx_buf_sz)
 {
 	u32 eor = le32_to_cpu(desc->opts1) & RingEnd;
 
+	/* Force memory writes to complete before releasing descriptor */
+	dma_wmb();
+
 	desc->opts1 = cpu_to_le32(DescOwn | eor | rx_buf_sz);
 }
 
@@ -6612,7 +6615,6 @@ static inline void rtl8169_map_to_asic(struct RxDesc *desc, dma_addr_t mapping,
 				       u32 rx_buf_sz)
 {
 	desc->addr = cpu_to_le64(mapping);
-	wmb();
 	rtl8169_mark_to_asic(desc, rx_buf_sz);
 }
 
@@ -7073,16 +7075,18 @@ static netdev_tx_t rtl8169_start_xmit(struct sk_buff *skb,
 
 	skb_tx_timestamp(skb);
 
-	wmb();
+	/* Force memory writes to complete before releasing descriptor */
+	dma_wmb();
 
 	/* Anti gcc 2.95.3 bugware (sic) */
 	status = opts[0] | len | (RingEnd * !((entry + 1) % NUM_TX_DESC));
 	txd->opts1 = cpu_to_le32(status);
 
-	tp->cur_tx += frags + 1;
-
+	/* Force all memory writes to complete before notifying device */
 	wmb();
 
+	tp->cur_tx += frags + 1;
+
 	RTL_W8(TxPoll, NPQ);
 
 	mmiowb();
@@ -7181,11 +7185,16 @@ static void rtl_tx(struct net_device *dev, struct rtl8169_private *tp)
 		struct ring_info *tx_skb = tp->tx_skb + entry;
 		u32 status;
 
-		rmb();
 		status = le32_to_cpu(tp->TxDescArray[entry].opts1);
 		if (status & DescOwn)
 			break;
 
+		/* This barrier is needed to keep us from reading
+		 * any other fields out of the Tx descriptor until
+		 * we know the status of DescOwn
+		 */
+		dma_rmb();
+
 		rtl8169_unmap_tx_skb(&tp->pci_dev->dev, tx_skb,
 				     tp->TxDescArray + entry);
 		if (status & LastFrag) {
@@ -7280,11 +7289,16 @@ static int rtl_rx(struct net_device *dev, struct rtl8169_private *tp, u32 budget
 		struct RxDesc *desc = tp->RxDescArray + entry;
 		u32 status;
 
-		rmb();
 		status = le32_to_cpu(desc->opts1) & tp->opts1_mask;
-
 		if (status & DescOwn)
 			break;
+
+		/* This barrier is needed to keep us from reading
+		 * any other fields out of the Rx descriptor until
+		 * we know the status of DescOwn
+		 */
+		dma_rmb();
+
 		if (unlikely(status & RxRES)) {
 			netif_info(tp, rx_err, dev, "Rx ERROR. status = %08x\n",
 				   status);
@@ -7346,7 +7360,6 @@ static int rtl_rx(struct net_device *dev, struct rtl8169_private *tp, u32 budget
 		}
 release_descriptor:
 		desc->opts2 = 0;
-		wmb();
 		rtl8169_mark_to_asic(desc, rx_buf_sz);
 	}
 

include/asm-generic/barrier.h

@@ -42,6 +42,14 @@
 #define wmb()	mb()
 #endif
 
+#ifndef dma_rmb
+#define dma_rmb()	rmb()
+#endif
+
+#ifndef dma_wmb
+#define dma_wmb()	wmb()
+#endif
+
 #ifndef read_barrier_depends
 #define read_barrier_depends()		do { } while (0)
 #endif