Merge tag 'at91-cleanup' of git://git.kernel.org/pub/scm/linux/kernel/git/nferre/linux-at91 into next/cleanup

Merge "at91: cleanup for 3.20 #1" from Nicolas Ferre:

First batch of cleanup for 3.20:
- Documentation for AT91 SoC
- Config options, files and functions removal to continue the big !DT
  cleanup done in 3.19
- move of debug-macro.S to its usual location

* tag 'at91-cleanup' of git://git.kernel.org/pub/scm/linux/kernel/git/nferre/linux-at91:
  ARM: at91: remove useless at91rm9200_set_type()
  ARM: at91: remove useless at91rm9200_dt_initialize()
  ARM: at91: move debug-macro.S into the common space
  ARM: at91: remove useless at91_sysirq_mask_rtx
  ARM: at91: remove useless config MACH_AT91SAM9_DT
  ARM: at91: remove useless config MACH_AT91RM9200_DT
  ARM: at91: remove unused mach/memory.h
  ARM: at91: remove useless header file includes
  ARM: at91: remove unneeded header file
  rtc: at91/Kconfig: remove useless options
  ARM: at91/Documentation: add a README for Atmel SoCs

Signed-off-by: Olof Johansson <olof@lixom.net>

Documentation/arm/Atmel/README

@@ -0,0 +1,124 @@
+ARM Atmel SoCs (aka AT91)
+=========================
+
+
+Introduction
+------------
+This document gives useful information about the ARM Atmel SoCs that are
+currently supported in Linux Mainline (you know, the one on kernel.org).
+
+It is important to note that the Atmel | SMART ARM-based MPU product line is
+historically named "AT91" or "at91" throughout the Linux kernel development
+process even if this product prefix has completely disappeared from the
+official Atmel product name. Anyway, files, directories, git trees,
+git branches/tags and email subject always contain this "at91" sub-string.
+
+
+AT91 SoCs
+---------
+Documentation and detailled datasheet for each product are available on
+the Atmel website: http://www.atmel.com.
+
+  Flavors:
+    * ARM 920 based SoC
+      - at91rm9200
+        + Datasheet
+          http://www.atmel.com/Images/doc1768.pdf
+
+    * ARM 926 based SoCs
+      - at91sam9260
+        + Datasheet
+          http://www.atmel.com/Images/doc6221.pdf
+
+      - at91sam9xe
+        + Datasheet
+          http://www.atmel.com/Images/Atmel-6254-32-bit-ARM926EJ-S-Embedded-Microprocessor-SAM9XE_Datasheet.pdf
+
+      - at91sam9261
+        + Datasheet
+          http://www.atmel.com/Images/doc6062.pdf
+
+      - at91sam9263
+        + Datasheet
+          http://www.atmel.com/Images/Atmel_6249_32-bit-ARM926EJ-S-Microcontroller_SAM9263_Datasheet.pdf
+
+      - at91sam9rl
+        + Datasheet
+          http://www.atmel.com/Images/doc6289.pdf
+
+      - at91sam9g20
+        + Datasheet
+          http://www.atmel.com/Images/doc6384.pdf
+
+      - at91sam9g45 family
+        - at91sam9g45
+        - at91sam9g46
+        - at91sam9m10
+        - at91sam9m11 (device superset)
+        + Datasheet
+          http://www.atmel.com/Images/Atmel-6437-32-bit-ARM926-Embedded-Microprocessor-SAM9M11_Datasheet.pdf
+
+      - at91sam9x5 family (aka "The 5 series")
+        - at91sam9g15
+        - at91sam9g25
+        - at91sam9g35
+        - at91sam9x25
+        - at91sam9x35
+        + Datasheet (can be considered as covering the whole family)
+          http://www.atmel.com/Images/Atmel_11055_32-bit-ARM926EJ-S-Microcontroller_SAM9X35_Datasheet.pdf
+
+      - at91sam9n12
+        + Datasheet
+          http://www.atmel.com/Images/Atmel_11063_32-bit-ARM926EJ-S-Microcontroller_SAM9N12CN11CN12_Datasheet.pdf
+
+    * ARM Cortex-A5 based SoCs
+      - sama5d3 family
+        - sama5d31
+        - sama5d33
+        - sama5d34
+        - sama5d35
+        - sama5d36 (device superset)
+        + Datasheet
+          http://www.atmel.com/Images/Atmel-11121-32-bit-Cortex-A5-Microcontroller-SAMA5D3_Datasheet.pdf
+
+    * ARM Cortex-A5 + NEON based SoCs
+      - sama5d4 family
+        - sama5d41
+        - sama5d42
+        - sama5d43
+        - sama5d44 (device superset)
+        + Datasheet
+          http://www.atmel.com/Images/Atmel-11238-32-bit-Cortex-A5-Microcontroller-SAMA5D4_Datasheet.pdf
+
+
+Linux kernel information
+------------------------
+Linux kernel mach directory: arch/arm/mach-at91
+MAINTAINERS entry is: "ARM/ATMEL AT91RM9200 AND AT91SAM ARM ARCHITECTURES"
+
+
+Device Tree for AT91 SoCs and boards
+------------------------------------
+All AT91 SoCs are converted to Device Tree. Since Linux 3.19, these products
+must use this method to boot the Linux kernel.
+
+Work In Progress statement:
+Device Tree files and Device Tree bindings that apply to AT91 SoCs and boards are
+considered as "Unstable". To be completely clear, any at91 binding can change at
+any time. So, be sure to use a Device Tree Binary and a Kernel Image generated from
+the same source tree.
+Please refer to the Documentation/devicetree/bindings/ABI.txt file for a
+definition of a "Stable" binding/ABI.
+This statement will be removed by AT91 MAINTAINERS when appropriate.
+
+Naming conventions and best practice:
+- SoCs Device Tree Source Include files are named after the official name of
+  the product (at91sam9g20.dtsi or sama5d33.dtsi for instance).
+- Device Tree Source Include files (.dtsi) are used to collect common nodes that can be
+  shared across SoCs or boards (sama5d3.dtsi or at91sam9x5cm.dtsi for instance).
+  When collecting nodes for a particular peripheral or topic, the identifier have to
+  be placed at the end of the file name, separated with a "_" (at91sam9x5_can.dtsi
+  or sama5d3_gmac.dtsi for example).
+- board Device Tree Source files (.dts) are prefixed by the string "at91-" so
+  that they can be identified easily. Note that some files are historical exceptions
+  to this rule (sama5d3[13456]ek.dts, usb_a9g20.dts or animeo_ip.dts for example).

MAINTAINERS

@@ -877,6 +877,7 @@ F:	arch/arm/boot/dts/at91*.dts
 F:	arch/arm/boot/dts/at91*.dtsi
 F:	arch/arm/boot/dts/sama*.dts
 F:	arch/arm/boot/dts/sama*.dtsi
+F:	arch/arm/include/debug/at91.S
 
 ARM/ATMEL AT91 Clock Support
 M:	Boris Brezillon <boris.brezillon@free-electrons.com>

arch/arm/Kconfig.debug

@@ -115,15 +115,18 @@ choice
 		    0x80024000      | 0xf0024000     | UART9
 
 	config AT91_DEBUG_LL_DBGU0
-		bool "Kernel low-level debugging on rm9200, 9260/9g20, 9261/9g10 and 9rl"
+		bool "Kernel low-level debugging on rm9200, 9260/9g20, 9261/9g10, 9rl, 9x5, 9n12"
+		select DEBUG_AT91_UART
 		depends on HAVE_AT91_DBGU0
 
 	config AT91_DEBUG_LL_DBGU1
-		bool "Kernel low-level debugging on 9263 and 9g45"
+		bool "Kernel low-level debugging on 9263, 9g45 and sama5d3"
+		select DEBUG_AT91_UART
 		depends on HAVE_AT91_DBGU1
 
 	config AT91_DEBUG_LL_DBGU2
 		bool "Kernel low-level debugging on sama5d4"
+		select DEBUG_AT91_UART
 		depends on HAVE_AT91_DBGU2
 
 	config DEBUG_BCM2835
@@ -1165,6 +1168,8 @@ config DEBUG_LL_INCLUDE
 	string
 	default "debug/sa1100.S" if DEBUG_SA1100
 	default "debug/8250.S" if DEBUG_LL_UART_8250 || DEBUG_UART_8250
+	default "debug/at91.S" if AT91_DEBUG_LL_DBGU0 || AT91_DEBUG_LL_DBGU1 || \
+				AT91_DEBUG_LL_DBGU2
 	default "debug/asm9260.S" if DEBUG_ASM9260_UART
 	default "debug/clps711x.S" if DEBUG_CLPS711X_UART1 || DEBUG_CLPS711X_UART2
 	default "debug/meson.S" if DEBUG_MESON_UARTAO

arch/arm/mach-at91/include/mach/debug-macro.S → arch/arm/include/debug/at91.S

@@ -1,6 +1,4 @@
 /*
- * arch/arm/mach-at91/include/mach/debug-macro.S
- *
  *  Copyright (C) 2003-2005 SAN People
  *
  * Debugging macro include header
@@ -11,18 +9,23 @@
  *
 */
 
-#include <mach/hardware.h>
-#include <mach/at91_dbgu.h>
-
 #if defined(CONFIG_AT91_DEBUG_LL_DBGU0)
-#define AT91_DBGU AT91_BASE_DBGU0
+#define AT91_DBGU 0xfffff200 /* AT91_BASE_DBGU0 */
 #elif defined(CONFIG_AT91_DEBUG_LL_DBGU1)
-#define AT91_DBGU AT91_BASE_DBGU1
+#define AT91_DBGU 0xffffee00 /* AT91_BASE_DBGU1 */
 #else
 /* On sama5d4, use USART3 as low level serial console */
-#define AT91_DBGU SAMA5D4_BASE_USART3
+#define AT91_DBGU 0xfc00c000 /* SAMA5D4_BASE_USART3 */
 #endif
 
+/* Keep in sync with mach-at91/include/mach/hardware.h */
+#define AT91_IO_P2V(x) ((x) - 0x01000000)
+
+#define AT91_DBGU_SR		(0x14)	/* Status Register */
+#define AT91_DBGU_THR		(0x1c)	/* Transmitter Holding Register */
+#define AT91_DBGU_TXRDY		(1 << 1)	/* Transmitter Ready */
+#define AT91_DBGU_TXEMPTY	(1 << 9)	/* Transmitter Empty */
+
 	.macro	addruart, rp, rv, tmp
 	ldr	\rp, =AT91_DBGU				@ System peripherals (phys address)
 	ldr	\rv, =AT91_IO_P2V(AT91_DBGU)		@ System peripherals (virt address)

arch/arm/mach-at91/Kconfig

@@ -174,14 +174,6 @@ config SOC_AT91SAM9N12
 # ----------------------------------------------------------
 endif # SOC_SAM_V4_V5
 
-config MACH_AT91RM9200_DT
-	def_bool SOC_AT91RM9200
-
-config MACH_AT91SAM9_DT
-	def_bool SOC_AT91SAM9
-
-# ----------------------------------------------------------
-
 comment "AT91 Feature Selections"
 
 config AT91_SLOW_CLOCK

arch/arm/mach-at91/Makefile

@@ -2,7 +2,7 @@
 # Makefile for the linux kernel.
 #
 
-obj-y		:= setup.o sysirq_mask.o
+obj-y		:= setup.o
 
 obj-$(CONFIG_SOC_AT91SAM9)	+= sam9_smc.o
 
@@ -19,8 +19,8 @@ obj-$(CONFIG_SOC_SAMA5D3)	+= sama5d3.o
 obj-$(CONFIG_SOC_SAMA5D4)	+= sama5d4.o
 
 # AT91SAM board with device-tree
-obj-$(CONFIG_MACH_AT91RM9200_DT) += board-dt-rm9200.o
-obj-$(CONFIG_MACH_AT91SAM9_DT) += board-dt-sam9.o
+obj-$(CONFIG_SOC_AT91RM9200) += board-dt-rm9200.o
+obj-$(CONFIG_SOC_AT91SAM9) += board-dt-sam9.o
 
 # SAMA5 board with device-tree
 obj-$(CONFIG_SOC_SAMA5)		+= board-dt-sama5.o

arch/arm/mach-at91/at91sam9260.c

@@ -51,8 +51,6 @@ static void __init at91sam9260_map_io(void)
 static void __init at91sam9260_initialize(void)
 {
 	arm_pm_idle = at91sam9_idle;
-
-	at91_sysirq_mask_rtt(AT91SAM9260_BASE_RTT);
 }
 
 AT91_SOC_START(at91sam9260)

arch/arm/mach-at91/at91sam9261.c

@@ -32,8 +32,6 @@ static void __init at91sam9261_map_io(void)
 static void __init at91sam9261_initialize(void)
 {
 	arm_pm_idle = at91sam9_idle;
-
-	at91_sysirq_mask_rtt(AT91SAM9261_BASE_RTT);
 }
 
 AT91_SOC_START(at91sam9261)

arch/arm/mach-at91/at91sam9263.c

@@ -29,9 +29,6 @@ static void __init at91sam9263_map_io(void)
 static void __init at91sam9263_initialize(void)
 {
 	arm_pm_idle = at91sam9_idle;
-
-	at91_sysirq_mask_rtt(AT91SAM9263_BASE_RTT0);
-	at91_sysirq_mask_rtt(AT91SAM9263_BASE_RTT1);
 }
 
 AT91_SOC_START(at91sam9263)

arch/arm/mach-at91/at91sam9g45.c

@@ -11,7 +11,6 @@
  */
 
 #include <asm/system_misc.h>
-#include <asm/irq.h>
 #include <mach/hardware.h>
 
 #include "soc.h"
@@ -29,9 +28,6 @@ static void __init at91sam9g45_map_io(void)
 static void __init at91sam9g45_initialize(void)
 {
 	arm_pm_idle = at91sam9_idle;
-
-	at91_sysirq_mask_rtc(AT91SAM9G45_BASE_RTC);
-	at91_sysirq_mask_rtt(AT91SAM9G45_BASE_RTT);
 }
 
 AT91_SOC_START(at91sam9g45)

arch/arm/mach-at91/at91sam9n12.c

@@ -21,12 +21,6 @@ static void __init at91sam9n12_map_io(void)
 	at91_init_sram(0, AT91SAM9N12_SRAM_BASE, AT91SAM9N12_SRAM_SIZE);
 }
 
-static void __init at91sam9n12_initialize(void)
-{
-	at91_sysirq_mask_rtc(AT91SAM9N12_BASE_RTC);
-}
-
 AT91_SOC_START(at91sam9n12)
 	.map_io = at91sam9n12_map_io,
-	.init = at91sam9n12_initialize,
 AT91_SOC_END

arch/arm/mach-at91/at91sam9rl.c

@@ -10,7 +10,6 @@
  */
 
 #include <asm/system_misc.h>
-#include <asm/irq.h>
 #include <mach/cpu.h>
 #include <mach/at91_dbgu.h>
 #include <mach/hardware.h>
@@ -42,9 +41,6 @@ static void __init at91sam9rl_map_io(void)
 static void __init at91sam9rl_initialize(void)
 {
 	arm_pm_idle = at91sam9_idle;
-
-	at91_sysirq_mask_rtc(AT91SAM9RL_BASE_RTC);
-	at91_sysirq_mask_rtt(AT91SAM9RL_BASE_RTT);
 }
 
 AT91_SOC_START(at91sam9rl)

arch/arm/mach-at91/at91sam9x5.c

@@ -21,16 +21,6 @@ static void __init at91sam9x5_map_io(void)
 	at91_init_sram(0, AT91SAM9X5_SRAM_BASE, AT91SAM9X5_SRAM_SIZE);
 }
 
-static void __init at91sam9x5_initialize(void)
-{
-	at91_sysirq_mask_rtc(AT91SAM9X5_BASE_RTC);
-}
-
-/* --------------------------------------------------------------------
- *  Interrupt initialization
- * -------------------------------------------------------------------- */
-
 AT91_SOC_START(at91sam9x5)
 	.map_io = at91sam9x5_map_io,
-	.init = at91sam9x5_initialize,
 AT91_SOC_END

arch/arm/mach-at91/board-dt-rm9200.c

@@ -38,6 +38,6 @@ static const char *at91rm9200_dt_board_compat[] __initdata = {
 DT_MACHINE_START(at91rm9200_dt, "Atmel AT91RM9200 (Device Tree)")
 	.init_time      = at91rm9200_dt_timer_init,
 	.map_io		= at91_map_io,
-	.init_early	= at91rm9200_dt_initialize,
+	.init_early	= at91_dt_initialize,
 	.dt_compat	= at91rm9200_dt_board_compat,
 MACHINE_END

arch/arm/mach-at91/generic.h

@@ -21,14 +21,8 @@ extern void __init at91_init_sram(int bank, unsigned long base,
 				  unsigned int length);
 
  /* Processors */
-extern void __init at91rm9200_set_type(int type);
-extern void __init at91rm9200_dt_initialize(void);
 extern void __init at91_dt_initialize(void);
 
- /* Interrupts */
-extern void __init at91_sysirq_mask_rtc(u32 rtc_base);
-extern void __init at91_sysirq_mask_rtt(u32 rtt_base);
-
  /* Timer */
 extern void at91rm9200_timer_init(void);
 

arch/arm/mach-at91/include/mach/at91_pio.h

@@ -1,80 +0,0 @@
-/*
- * arch/arm/mach-at91/include/mach/at91_pio.h
- *
- * Copyright (C) 2005 Ivan Kokshaysky
- * Copyright (C) SAN People
- *
- * Parallel I/O Controller (PIO) - System peripherals registers.
- * Based on AT91RM9200 datasheet revision E.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-#ifndef AT91_PIO_H
-#define AT91_PIO_H
-
-#define PIO_PER		0x00	/* Enable Register */
-#define PIO_PDR		0x04	/* Disable Register */
-#define PIO_PSR		0x08	/* Status Register */
-#define PIO_OER		0x10	/* Output Enable Register */
-#define PIO_ODR		0x14	/* Output Disable Register */
-#define PIO_OSR		0x18	/* Output Status Register */
-#define PIO_IFER	0x20	/* Glitch Input Filter Enable */
-#define PIO_IFDR	0x24	/* Glitch Input Filter Disable */
-#define PIO_IFSR	0x28	/* Glitch Input Filter Status */
-#define PIO_SODR	0x30	/* Set Output Data Register */
-#define PIO_CODR	0x34	/* Clear Output Data Register */
-#define PIO_ODSR	0x38	/* Output Data Status Register */
-#define PIO_PDSR	0x3c	/* Pin Data Status Register */
-#define PIO_IER		0x40	/* Interrupt Enable Register */
-#define PIO_IDR		0x44	/* Interrupt Disable Register */
-#define PIO_IMR		0x48	/* Interrupt Mask Register */
-#define PIO_ISR		0x4c	/* Interrupt Status Register */
-#define PIO_MDER	0x50	/* Multi-driver Enable Register */
-#define PIO_MDDR	0x54	/* Multi-driver Disable Register */
-#define PIO_MDSR	0x58	/* Multi-driver Status Register */
-#define PIO_PUDR	0x60	/* Pull-up Disable Register */
-#define PIO_PUER	0x64	/* Pull-up Enable Register */
-#define PIO_PUSR	0x68	/* Pull-up Status Register */
-#define PIO_ASR		0x70	/* Peripheral A Select Register */
-#define PIO_ABCDSR1	0x70	/* Peripheral ABCD Select Register 1 [some sam9 only] */
-#define PIO_BSR		0x74	/* Peripheral B Select Register */
-#define PIO_ABCDSR2	0x74	/* Peripheral ABCD Select Register 2 [some sam9 only] */
-#define PIO_ABSR	0x78	/* AB Status Register */
-#define PIO_IFSCDR	0x80	/* Input Filter Slow Clock Disable Register */
-#define PIO_IFSCER	0x84	/* Input Filter Slow Clock Enable Register */
-#define PIO_IFSCSR	0x88	/* Input Filter Slow Clock Status Register */
-#define PIO_SCDR	0x8c	/* Slow Clock Divider Debouncing Register */
-#define		PIO_SCDR_DIV	(0x3fff <<  0)		/* Slow Clock Divider Mask */
-#define PIO_PPDDR	0x90	/* Pad Pull-down Disable Register */
-#define PIO_PPDER	0x94	/* Pad Pull-down Enable Register */
-#define PIO_PPDSR	0x98	/* Pad Pull-down Status Register */
-#define PIO_OWER	0xa0	/* Output Write Enable Register */
-#define PIO_OWDR	0xa4	/* Output Write Disable Register */
-#define PIO_OWSR	0xa8	/* Output Write Status Register */
-#define PIO_AIMER	0xb0	/* Additional Interrupt Modes Enable Register */
-#define PIO_AIMDR	0xb4	/* Additional Interrupt Modes Disable Register */
-#define PIO_AIMMR	0xb8	/* Additional Interrupt Modes Mask Register */
-#define PIO_ESR		0xc0	/* Edge Select Register */
-#define PIO_LSR		0xc4	/* Level Select Register */
-#define PIO_ELSR	0xc8	/* Edge/Level Status Register */
-#define PIO_FELLSR	0xd0	/* Falling Edge/Low Level Select Register */
-#define PIO_REHLSR	0xd4	/* Rising Edge/ High Level Select Register */
-#define PIO_FRLHSR	0xd8	/* Fall/Rise - Low/High Status Register */
-#define PIO_SCHMITT	0x100	/* Schmitt Trigger Register */
-
-#define ABCDSR_PERIPH_A	0x0
-#define ABCDSR_PERIPH_B	0x1
-#define ABCDSR_PERIPH_C	0x2
-#define ABCDSR_PERIPH_D	0x3
-
-#define SAMA5D3_PIO_DRIVER1		0x118  /*PIO Driver 1 register offset*/
-#define SAMA5D3_PIO_DRIVER2		0x11C  /*PIO Driver 2 register offset*/
-
-#define AT91SAM9X5_PIO_DRIVER1	0x114  /*PIO Driver 1 register offset*/
-#define AT91SAM9X5_PIO_DRIVER2	0x118  /*PIO Driver 2 register offset*/
-
-#endif

arch/arm/mach-at91/include/mach/at91_rtt.h

@@ -1,35 +0,0 @@
-/*
- * arch/arm/mach-at91/include/mach/at91_rtt.h
- *
- * Copyright (C) 2007 Andrew Victor
- * Copyright (C) 2007 Atmel Corporation.
- *
- * Real-time Timer (RTT) - System peripherals regsters.
- * Based on AT91SAM9261 datasheet revision D.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-#ifndef AT91_RTT_H
-#define AT91_RTT_H
-
-#define AT91_RTT_MR		0x00			/* Real-time Mode Register */
-#define		AT91_RTT_RTPRES		(0xffff << 0)		/* Real-time Timer Prescaler Value */
-#define		AT91_RTT_ALMIEN		(1 << 16)		/* Alarm Interrupt Enable */
-#define		AT91_RTT_RTTINCIEN	(1 << 17)		/* Real Time Timer Increment Interrupt Enable */
-#define		AT91_RTT_RTTRST		(1 << 18)		/* Real Time Timer Restart */
-
-#define AT91_RTT_AR		0x04			/* Real-time Alarm Register */
-#define		AT91_RTT_ALMV		(0xffffffff)		/* Alarm Value */
-
-#define AT91_RTT_VR		0x08			/* Real-time Value Register */
-#define		AT91_RTT_CRTV		(0xffffffff)		/* Current Real-time Value */
-
-#define AT91_RTT_SR		0x0c			/* Real-time Status Register */
-#define		AT91_RTT_ALMS		(1 << 0)		/* Real-time Alarm Status */
-#define		AT91_RTT_RTTINC		(1 << 1)		/* Real-time Timer Increment */
-
-#endif

arch/arm/mach-at91/include/mach/memory.h

@@ -1,26 +0,0 @@
-/*
- * arch/arm/mach-at91/include/mach/memory.h
- *
- *  Copyright (C) 2004 SAN People
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-
-#ifndef __ASM_ARCH_MEMORY_H
-#define __ASM_ARCH_MEMORY_H
-
-#include <mach/hardware.h>
-
-#endif

arch/arm/mach-at91/sama5d3.c

@@ -30,12 +30,6 @@ static void __init sama5d3_map_io(void)
 	at91_init_sram(0, SAMA5D3_SRAM_BASE, SAMA5D3_SRAM_SIZE);
 }
 
-static void __init sama5d3_initialize(void)
-{
-	at91_sysirq_mask_rtc(SAMA5D3_BASE_RTC);
-}
-
 AT91_SOC_START(sama5d3)
 	.map_io = sama5d3_map_io,
-	.init = sama5d3_initialize,
 AT91_SOC_END

arch/arm/mach-at91/setup.c

@@ -31,17 +31,6 @@ struct at91_init_soc __initdata at91_boot_soc;
 struct at91_socinfo at91_soc_initdata;
 EXPORT_SYMBOL(at91_soc_initdata);
 
-void __init at91rm9200_set_type(int type)
-{
-	if (type == ARCH_REVISON_9200_PQFP)
-		at91_soc_initdata.subtype = AT91_SOC_RM9200_PQFP;
-	else
-		at91_soc_initdata.subtype = AT91_SOC_RM9200_BGA;
-
-	pr_info("filled in soc subtype: %s\n",
-		at91_get_soc_subtype(&at91_soc_initdata));
-}
-
 void __iomem *at91_ramc_base[2];
 EXPORT_SYMBOL_GPL(at91_ramc_base);
 
@@ -429,13 +418,6 @@ static void at91_dt_ramc(void)
 	at91_pm_set_standby(standby);
 }
 
-void __init at91rm9200_dt_initialize(void)
-{
-	at91_dt_ramc();
-
-	at91_boot_soc.init();
-}
-
 void __init at91_dt_initialize(void)
 {
 	at91_dt_ramc();

arch/arm/mach-at91/sysirq_mask.c

@@ -1,75 +0,0 @@
-/*
- * sysirq_mask.c - System-interrupt masking
- *
- * Copyright (C) 2013 Johan Hovold <jhovold@gmail.com>
- *
- * Functions to disable system interrupts from backup-powered peripherals.
- *
- * The RTC and RTT-peripherals are generally powered by backup power (VDDBU)
- * and are not reset on wake-up, user, watchdog or software reset. This means
- * that their interrupts may be enabled during early boot (e.g. after a user
- * reset).
- *
- * As the RTC and RTT share the system-interrupt line with the PIT, an
- * interrupt occurring before a handler has been installed would lead to the
- * system interrupt being disabled and prevent the system from booting.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-#include <linux/io.h>
-#include <mach/at91_rtt.h>
-
-#include "generic.h"
-
-#define AT91_RTC_IDR		0x24	/* Interrupt Disable Register */
-#define AT91_RTC_IMR		0x28	/* Interrupt Mask Register */
-#define AT91_RTC_IRQ_MASK	0x1f	/* Available IRQs mask */
-
-void __init at91_sysirq_mask_rtc(u32 rtc_base)
-{
-	void __iomem *base;
-
-	base = ioremap(rtc_base, 64);
-	if (!base)
-		return;
-
-	/*
-	 * sam9x5 SoCs have the following errata:
-	 * "RTC: Interrupt Mask Register cannot be used
-	 *  Interrupt Mask Register read always returns 0."
-	 *
-	 * Hence we're not relying on IMR values to disable
-	 * interrupts.
-	 */
-	writel_relaxed(AT91_RTC_IRQ_MASK, base + AT91_RTC_IDR);
-	(void)readl_relaxed(base + AT91_RTC_IMR);	/* flush */
-
-	iounmap(base);
-}
-
-void __init at91_sysirq_mask_rtt(u32 rtt_base)
-{
-	void __iomem *base;
-	void __iomem *reg;
-	u32 mode;
-
-	base = ioremap(rtt_base, 16);
-	if (!base)
-		return;
-
-	reg = base + AT91_RTT_MR;
-
-	mode = readl_relaxed(reg);
-	if (mode & (AT91_RTT_ALMIEN | AT91_RTT_RTTINCIEN)) {
-		pr_info("AT91: Disabling rtt irq\n");
-		mode &= ~(AT91_RTT_ALMIEN | AT91_RTT_RTTINCIEN);
-		writel_relaxed(mode, reg);
-		(void)readl_relaxed(reg);			/* flush */
-	}
-
-	iounmap(base);
-}

drivers/rtc/Kconfig

@@ -1141,34 +1141,6 @@ config RTC_DRV_AT91SAM9
 	  probably want to use the real RTC block instead of the "RTT as an
 	  RTC" driver.
 
-config RTC_DRV_AT91SAM9_RTT
-	int
-	range 0 1
-	default 0
-	depends on RTC_DRV_AT91SAM9
-	help
-	  This option is only relevant for legacy board support and
-	  won't be used when booting a DT board.
-
-	  More than one RTT module is available. You can choose which
-	  one will be used as an RTC. The default of zero is normally
-	  OK to use, though some systems use that for non-RTC purposes.
-
-config RTC_DRV_AT91SAM9_GPBR
-	int
-	range 0 3
-	default 0
-	prompt "Backup Register Number"
-	depends on RTC_DRV_AT91SAM9
-	help
-	  This option is only relevant for legacy board support and
-	  won't be used when booting a DT board.
-
-	  The RTC driver needs to use one of the General Purpose Backup
-	  Registers (GPBRs) as well as the RTT. You can choose which one
-	  will be used. The default of zero is normally OK to use, but
-	  on some systems other software needs to use that register.
-
 config RTC_DRV_AU1XXX
 	tristate "Au1xxx Counter0 RTC support"
 	depends on MIPS_ALCHEMY