Merge branch 'perf/urgent' into perf/core, to resolve conflict

Signed-off-by: Ingo Molnar <mingo@kernel.org>

Documentation/devicetree/bindings/pinctrl/meson,pinctrl.txt

@@ -1,13 +1,16 @@
 == Amlogic Meson pinmux controller ==
 
 Required properties for the root node:
- - compatible: "amlogic,meson8-pinctrl" or "amlogic,meson8b-pinctrl"
+ - compatible: one of "amlogic,meson8-cbus-pinctrl"
+		      "amlogic,meson8b-cbus-pinctrl"
+		      "amlogic,meson8-aobus-pinctrl"
+		      "amlogic,meson8b-aobus-pinctrl"
  - reg: address and size of registers controlling irq functionality
 
 === GPIO sub-nodes ===
 
-The 2 power domains of the controller (regular and always-on) are
-represented as sub-nodes and each of them acts as a GPIO controller.
+The GPIO bank for the controller is represented as a sub-node and it acts as a
+GPIO controller.
 
 Required properties for sub-nodes are:
  - reg: should contain address and size for mux, pull-enable, pull and
@@ -18,10 +21,6 @@ Required properties for sub-nodes are:
  - gpio-controller: identifies the node as a gpio controller
  - #gpio-cells: must be 2
 
-Valid sub-node names are:
- - "banks" for the regular domain
- - "ao-bank" for the always-on domain
-
 === Other sub-nodes ===
 
 Child nodes without the "gpio-controller" represent some desired
@@ -45,7 +44,7 @@ pinctrl-bindings.txt
 === Example ===
 
 	pinctrl: pinctrl@c1109880 {
-		compatible = "amlogic,meson8-pinctrl";
+		compatible = "amlogic,meson8-cbus-pinctrl";
 		reg = <0xc1109880 0x10>;
 		#address-cells = <1>;
 		#size-cells = <1>;
@@ -61,15 +60,6 @@ pinctrl-bindings.txt
 			#gpio-cells = <2>;
                };
 
-		gpio_ao: ao-bank@c1108030 {
-			reg = <0xc8100014 0x4>,
-			      <0xc810002c 0x4>,
-			      <0xc8100024 0x8>;
-			reg-names = "mux", "pull", "gpio";
-			gpio-controller;
-			#gpio-cells = <2>;
-		};
-
 		nand {
 			mux {
 				groups = "nand_io", "nand_io_ce0", "nand_io_ce1",
@@ -79,18 +69,4 @@ pinctrl-bindings.txt
 				function = "nand";
 			};
 		};
-
-		uart_ao_a {
-			mux {
-				groups = "uart_tx_ao_a", "uart_rx_ao_a",
-					 "uart_cts_ao_a", "uart_rts_ao_a";
-				function = "uart_ao";
-			};
-
-			conf {
-				pins = "GPIOAO_0", "GPIOAO_1",
-				       "GPIOAO_2", "GPIOAO_3";
-				bias-disable;
-			};
-		};
 	};

Documentation/kernel-parameters.txt

@@ -4077,6 +4077,8 @@ bytes respectively. Such letter suffixes can also be entirely omitted.
 					sector if the number is odd);
 				i = IGNORE_DEVICE (don't bind to this
 					device);
+				j = NO_REPORT_LUNS (don't use report luns
+					command, uas only);
 				l = NOT_LOCKABLE (don't try to lock and
 					unlock ejectable media);
 				m = MAX_SECTORS_64 (don't transfer more

Documentation/usb/gadget_multi.txt

@@ -43,7 +43,7 @@ For the gadget two work under Windows two conditions have to be met:
 First of all, Windows need to detect the gadget as an USB composite
 gadget which on its own have some conditions[4].  If they are met,
 Windows lets USB Generic Parent Driver[5] handle the device which then
-tries to much drivers for each individual interface (sort of, don't
+tries to match drivers for each individual interface (sort of, don't
 get into too many details).
 
 The good news is: you do not have to worry about most of the

Documentation/x86/protection-keys.txt

@@ -0,0 +1,27 @@
+Memory Protection Keys for Userspace (PKU aka PKEYs) is a CPU feature
+which will be found on future Intel CPUs.
+
+Memory Protection Keys provides a mechanism for enforcing page-based
+protections, but without requiring modification of the page tables
+when an application changes protection domains.  It works by
+dedicating 4 previously ignored bits in each page table entry to a
+"protection key", giving 16 possible keys.
+
+There is also a new user-accessible register (PKRU) with two separate
+bits (Access Disable and Write Disable) for each key.  Being a CPU
+register, PKRU is inherently thread-local, potentially giving each
+thread a different set of protections from every other thread.
+
+There are two new instructions (RDPKRU/WRPKRU) for reading and writing
+to the new register.  The feature is only available in 64-bit mode,
+even though there is theoretically space in the PAE PTEs.  These
+permissions are enforced on data access only and have no effect on
+instruction fetches.
+
+=========================== Config Option ===========================
+
+This config option adds approximately 1.5kb of text. and 50 bytes of
+data to the executable.  A workload which does large O_DIRECT reads
+of holes in XFS files was run to exercise get_user_pages_fast().  No
+performance delta was observed with the config option
+enabled or disabled.

MAINTAINERS

@@ -6252,8 +6252,8 @@ S:	Maintained
 F:	tools/testing/selftests
 
 KERNEL VIRTUAL MACHINE (KVM)
-M:	Gleb Natapov <gleb@kernel.org>
 M:	Paolo Bonzini <pbonzini@redhat.com>
+M:	Radim Krčmář <rkrcmar@redhat.com>
 L:	kvm@vger.kernel.org
 W:	http://www.linux-kvm.org
 T:	git git://git.kernel.org/pub/scm/virt/kvm/kvm.git

Makefile

@@ -1,7 +1,7 @@
 VERSION = 4
 PATCHLEVEL = 6
 SUBLEVEL = 0
-EXTRAVERSION = -rc3
+EXTRAVERSION = -rc4
 NAME = Blurry Fish Butt
 
 # *DOCUMENTATION*

arch/arc/Kconfig

@@ -593,7 +593,6 @@ config PCI_SYSCALL
 	def_bool PCI
 
 source "drivers/pci/Kconfig"
-source "drivers/pci/pcie/Kconfig"
 
 endmenu
 

arch/arc/boot/dts/axs10x_mb.dtsi

@@ -47,14 +47,6 @@
 			clocks = <&apbclk>;
 			clock-names = "stmmaceth";
 			max-speed = <100>;
-			mdio0 {
-				#address-cells = <1>;
-				#size-cells = <0>;
-				compatible = "snps,dwmac-mdio";
-				phy1: ethernet-phy@1 {
-					reg = <1>;
-				};
-			};
 		};
 
 		ehci@0x40000 {

arch/arc/configs/axs103_defconfig

@@ -42,6 +42,7 @@ CONFIG_DEVTMPFS=y
 # CONFIG_STANDALONE is not set
 # CONFIG_PREVENT_FIRMWARE_BUILD is not set
 # CONFIG_FIRMWARE_IN_KERNEL is not set
+CONFIG_BLK_DEV_LOOP=y
 CONFIG_SCSI=y
 CONFIG_BLK_DEV_SD=y
 CONFIG_NETDEVICES=y

arch/arc/configs/axs103_smp_defconfig

@@ -43,6 +43,7 @@ CONFIG_DEVTMPFS=y
 # CONFIG_STANDALONE is not set
 # CONFIG_PREVENT_FIRMWARE_BUILD is not set
 # CONFIG_FIRMWARE_IN_KERNEL is not set
+CONFIG_BLK_DEV_LOOP=y
 CONFIG_SCSI=y
 CONFIG_BLK_DEV_SD=y
 CONFIG_NETDEVICES=y

arch/arc/include/asm/fb.h

@@ -0,0 +1,19 @@
+#ifndef _ASM_FB_H_
+#define _ASM_FB_H_
+
+#include <linux/fb.h>
+#include <linux/fs.h>
+#include <asm/page.h>
+
+static inline void fb_pgprotect(struct file *file, struct vm_area_struct *vma,
+				unsigned long off)
+{
+	vma->vm_page_prot = pgprot_noncached(vma->vm_page_prot);
+}
+
+static inline int fb_is_primary_device(struct fb_info *info)
+{
+	return 0;
+}
+
+#endif /* _ASM_FB_H_ */

arch/arm/boot/dts/am335x-baltos-ir5221.dts

@@ -470,9 +470,12 @@
 };
 
 &cpsw_emac0 {
-	phy_id = <&davinci_mdio>, <0>;
 	phy-mode = "rmii";
 	dual_emac_res_vlan = <1>;
+	fixed-link {
+		speed = <100>;
+		full-duplex;
+	};
 };
 
 &cpsw_emac1 {

arch/arm/boot/dts/am4372.dtsi

@@ -207,7 +207,7 @@
 			ti,tptcs = <&edma_tptc0 7>, <&edma_tptc1 5>,
 				   <&edma_tptc2 0>;
 
-			ti,edma-memcpy-channels = <32 33>;
+			ti,edma-memcpy-channels = <58 59>;
 		};
 
 		edma_tptc0: tptc@49800000 {

arch/arm/boot/dts/am43x-epos-evm.dts

@@ -794,3 +794,8 @@
 	tx-num-evt = <32>;
 	rx-num-evt = <32>;
 };
+
+&synctimer_32kclk {
+	assigned-clocks = <&mux_synctimer32k_ck>;
+	assigned-clock-parents = <&clkdiv32k_ick>;
+};

arch/arm/boot/dts/armada-385-linksys.dtsi

@@ -117,7 +117,7 @@
 			};
 
 			/* USB part of the eSATA/USB 2.0 port */
-			usb@50000 {
+			usb@58000 {
 				status = "okay";
 			};
 

arch/arm/boot/dts/meson8.dtsi

@@ -91,8 +91,8 @@
 		clock-frequency = <141666666>;
 	};
 
-	pinctrl: pinctrl@c1109880 {
-		compatible = "amlogic,meson8-pinctrl";
+	pinctrl_cbus: pinctrl@c1109880 {
+		compatible = "amlogic,meson8-cbus-pinctrl";
 		reg = <0xc1109880 0x10>;
 		#address-cells = <1>;
 		#size-cells = <1>;
@@ -108,29 +108,6 @@
 			#gpio-cells = <2>;
 		};
 
-		gpio_ao: ao-bank@c1108030 {
-			reg = <0xc8100014 0x4>,
-			      <0xc810002c 0x4>,
-			      <0xc8100024 0x8>;
-			reg-names = "mux", "pull", "gpio";
-			gpio-controller;
-			#gpio-cells = <2>;
-		};
-
-		uart_ao_a_pins: uart_ao_a {
-			mux {
-				groups = "uart_tx_ao_a", "uart_rx_ao_a";
-				function = "uart_ao";
-			};
-		};
-
-		i2c_ao_pins: i2c_mst_ao {
-			mux {
-				groups = "i2c_mst_sck_ao", "i2c_mst_sda_ao";
-				function = "i2c_mst_ao";
-			};
-		};
-
 		spi_nor_pins: nor {
 			mux {
 				groups = "nor_d", "nor_q", "nor_c", "nor_cs";
@@ -157,4 +134,34 @@
 		};
 	};
 
+	pinctrl_aobus: pinctrl@c8100084 {
+		compatible = "amlogic,meson8-aobus-pinctrl";
+		reg = <0xc8100084 0xc>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		gpio_ao: ao-bank@c1108030 {
+			reg = <0xc8100014 0x4>,
+			      <0xc810002c 0x4>,
+			      <0xc8100024 0x8>;
+			reg-names = "mux", "pull", "gpio";
+			gpio-controller;
+			#gpio-cells = <2>;
+		};
+
+		uart_ao_a_pins: uart_ao_a {
+			mux {
+				groups = "uart_tx_ao_a", "uart_rx_ao_a";
+				function = "uart_ao";
+			};
+		};
+
+		i2c_ao_pins: i2c_mst_ao {
+			mux {
+				groups = "i2c_mst_sck_ao", "i2c_mst_sda_ao";
+				function = "i2c_mst_ao";
+			};
+		};
+	};
 }; /* end of / */

arch/arm/boot/dts/meson8b.dtsi

@@ -155,8 +155,8 @@
 			reg = <0xc1108000 0x4>, <0xc1104000 0x460>;
 		};
 
-		pinctrl: pinctrl@c1109880 {
-			compatible = "amlogic,meson8b-pinctrl";
+		pinctrl_cbus: pinctrl@c1109880 {
+			compatible = "amlogic,meson8b-cbus-pinctrl";
 			reg = <0xc1109880 0x10>;
 			#address-cells = <1>;
 			#size-cells = <1>;
@@ -171,6 +171,14 @@
 				gpio-controller;
 				#gpio-cells = <2>;
 			};
+		};
+
+		pinctrl_aobus: pinctrl@c8100084 {
+			compatible = "amlogic,meson8b-aobus-pinctrl";
+			reg = <0xc8100084 0xc>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
 
 			gpio_ao: ao-bank@c1108030 {
 				reg = <0xc8100014 0x4>,

arch/arm/boot/dts/omap4.dtsi

@@ -70,7 +70,7 @@
 		compatible = "arm,cortex-a9-twd-timer";
 		clocks = <&mpu_periphclk>;
 		reg = <0x48240600 0x20>;
-		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_RAW(3) | IRQ_TYPE_LEVEL_HIGH)>;
+		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_RAW(3) | IRQ_TYPE_EDGE_RISING)>;
 		interrupt-parent = <&gic>;
 	};
 

arch/arm/configs/u8500_defconfig

@@ -63,6 +63,9 @@ CONFIG_INPUT_TOUCHSCREEN=y
 CONFIG_TOUCHSCREEN_BU21013=y
 CONFIG_INPUT_MISC=y
 CONFIG_INPUT_AB8500_PONKEY=y
+CONFIG_RMI4_CORE=y
+CONFIG_RMI4_I2C=y
+CONFIG_RMI4_F11=y
 # CONFIG_SERIO is not set
 CONFIG_VT_HW_CONSOLE_BINDING=y
 # CONFIG_LEGACY_PTYS is not set

arch/arm/kvm/arm.c

@@ -1112,10 +1112,17 @@ static void __init hyp_cpu_pm_init(void)
 {
 	cpu_pm_register_notifier(&hyp_init_cpu_pm_nb);
 }
+static void __init hyp_cpu_pm_exit(void)
+{
+	cpu_pm_unregister_notifier(&hyp_init_cpu_pm_nb);
+}
 #else
 static inline void hyp_cpu_pm_init(void)
 {
 }
+static inline void hyp_cpu_pm_exit(void)
+{
+}
 #endif
 
 static void teardown_common_resources(void)
@@ -1141,9 +1148,7 @@ static int init_subsystems(void)
 	/*
 	 * Register CPU Hotplug notifier
 	 */
-	cpu_notifier_register_begin();
-	err = __register_cpu_notifier(&hyp_init_cpu_nb);
-	cpu_notifier_register_done();
+	err = register_cpu_notifier(&hyp_init_cpu_nb);
 	if (err) {
 		kvm_err("Cannot register KVM init CPU notifier (%d)\n", err);
 		return err;
@@ -1193,6 +1198,8 @@ static void teardown_hyp_mode(void)
 	free_hyp_pgds();
 	for_each_possible_cpu(cpu)
 		free_page(per_cpu(kvm_arm_hyp_stack_page, cpu));
+	unregister_cpu_notifier(&hyp_init_cpu_nb);
+	hyp_cpu_pm_exit();
 }
 
 static int init_vhe_mode(void)

arch/arm/mach-omap2/id.c

@@ -669,9 +669,9 @@ void __init dra7xxx_check_revision(void)
 		case 0:
 			omap_revision = DRA722_REV_ES1_0;
 			break;
+		case 1:
 		default:
-			/* If we have no new revisions */
-			omap_revision = DRA722_REV_ES1_0;
+			omap_revision = DRA722_REV_ES2_0;
 			break;
 		}
 		break;

arch/arm/mach-omap2/io.c

@@ -368,6 +368,7 @@ void __init omap5_map_io(void)
 void __init dra7xx_map_io(void)
 {
 	iotable_init(dra7xx_io_desc, ARRAY_SIZE(dra7xx_io_desc));
+	omap_barriers_init();
 }
 #endif
 /*

arch/arm/mach-omap2/omap_hwmod.c

@@ -1416,9 +1416,7 @@ static void _enable_sysc(struct omap_hwmod *oh)
 	    (sf & SYSC_HAS_CLOCKACTIVITY))
 		_set_clockactivity(oh, oh->class->sysc->clockact, &v);
 
-	/* If the cached value is the same as the new value, skip the write */
-	if (oh->_sysc_cache != v)
-		_write_sysconfig(v, oh);
+	_write_sysconfig(v, oh);
 
 	/*
 	 * Set the autoidle bit only after setting the smartidle bit
@@ -1481,7 +1479,9 @@ static void _idle_sysc(struct omap_hwmod *oh)
 		_set_master_standbymode(oh, idlemode, &v);
 	}
 
-	_write_sysconfig(v, oh);
+	/* If the cached value is the same as the new value, skip the write */
+	if (oh->_sysc_cache != v)
+		_write_sysconfig(v, oh);
 }
 
 /**

arch/arm/mach-omap2/omap_hwmod_81xx_data.c

@@ -582,9 +582,11 @@ static struct omap_hwmod_ocp_if dm81xx_alwon_l3_slow__gpmc = {
 	.user		= OCP_USER_MPU,
 };
 
+/* USB needs udelay 1 after reset at least on hp t410, use 2 for margin */
 static struct omap_hwmod_class_sysconfig dm81xx_usbhsotg_sysc = {
 	.rev_offs	= 0x0,
 	.sysc_offs	= 0x10,
+	.srst_udelay	= 2,
 	.sysc_flags	= SYSC_HAS_SIDLEMODE | SYSC_HAS_MIDLEMODE |
 				SYSC_HAS_SOFTRESET,
 	.idlemodes	= SIDLE_SMART | MSTANDBY_FORCE | MSTANDBY_SMART,

arch/arm/mach-omap2/soc.h

@@ -489,6 +489,7 @@ IS_OMAP_TYPE(3430, 0x3430)
 #define DRA752_REV_ES2_0	(DRA7XX_CLASS | (0x52 << 16) | (0x20 << 8))
 #define DRA722_REV_ES1_0	(DRA7XX_CLASS | (0x22 << 16) | (0x10 << 8))
 #define DRA722_REV_ES1_0	(DRA7XX_CLASS | (0x22 << 16) | (0x10 << 8))
+#define DRA722_REV_ES2_0	(DRA7XX_CLASS | (0x22 << 16) | (0x20 << 8))
 
 void omap2xxx_check_revision(void);
 void omap3xxx_check_revision(void);

arch/arm/mach-pxa/devices.c

@@ -1235,5 +1235,6 @@ static struct platform_device pxa2xx_pxa_dma = {
 void __init pxa2xx_set_dmac_info(int nb_channels, int nb_requestors)
 {
 	pxa_dma_pdata.dma_channels = nb_channels;
+	pxa_dma_pdata.nb_requestors = nb_requestors;
 	pxa_register_device(&pxa2xx_pxa_dma, &pxa_dma_pdata);
 }

arch/arm/mach-sa1100/Kconfig

@@ -61,10 +61,7 @@ config SA1100_H3100
 	select MFD_IPAQ_MICRO
 	help
 	  Say Y here if you intend to run this kernel on the Compaq iPAQ
-	  H3100 handheld computer.  Information about this machine and the
-	  Linux port to this machine can be found at:
-
-	  <http://www.handhelds.org/Compaq/index.html#iPAQ_H3100>
+	  H3100 handheld computer.
 
 config SA1100_H3600
 	bool "Compaq iPAQ H3600/H3700"
@@ -73,10 +70,7 @@ config SA1100_H3600
 	select MFD_IPAQ_MICRO
 	help
 	  Say Y here if you intend to run this kernel on the Compaq iPAQ
-	  H3600 handheld computer.  Information about this machine and the
-	  Linux port to this machine can be found at:
-
-	  <http://www.handhelds.org/Compaq/index.html#iPAQ_H3600>
+	  H3600 and H3700 handheld computers.
 
 config SA1100_BADGE4
 	bool "HP Labs BadgePAD 4"

arch/arm/mach-uniphier/platsmp.c

@@ -120,7 +120,7 @@ static int __init uniphier_smp_prepare_trampoline(unsigned int max_cpus)
 	if (ret)
 		return ret;
 
-	uniphier_smp_rom_boot_rsv2 = ioremap(rom_rsv2_phys, sizeof(SZ_4));
+	uniphier_smp_rom_boot_rsv2 = ioremap(rom_rsv2_phys, SZ_4);
 	if (!uniphier_smp_rom_boot_rsv2) {
 		pr_err("failed to map ROM_BOOT_RSV2 register\n");
 		return -ENOMEM;

arch/arm64/boot/dts/broadcom/vulcan.dtsi

@@ -108,12 +108,15 @@
 		reg = <0x0 0x30000000  0x0 0x10000000>;
 		reg-names = "PCI ECAM";
 
-			  /* IO 0x4000_0000 - 0x4001_0000 */
-		ranges = <0x01000000 0 0x40000000 0 0x40000000 0 0x00010000
-			  /* MEM 0x4800_0000 - 0x5000_0000 */
-			  0x02000000 0 0x48000000 0 0x48000000 0 0x08000000
-			  /* MEM64 pref 0x6_0000_0000 - 0x7_0000_0000 */
-			  0x43000000 6 0x00000000 6 0x00000000 1 0x00000000>;
+		/*
+		 * PCI ranges:
+		 *   IO		no supported
+		 *   MEM        0x4000_0000 - 0x6000_0000
+		 *   MEM64 pref 0x40_0000_0000 - 0x60_0000_0000
+		 */
+		ranges =
+		  <0x02000000    0 0x40000000    0 0x40000000    0 0x20000000
+		   0x43000000 0x40 0x00000000 0x40 0x00000000 0x20 0x00000000>;
 		interrupt-map-mask = <0 0 0 7>;
 		interrupt-map =
 		      /* addr  pin  ic   icaddr  icintr */

arch/arm64/include/asm/kvm_arm.h

@@ -151,8 +151,7 @@
  */
 #define VTCR_EL2_FLAGS		(VTCR_EL2_TG0_64K | VTCR_EL2_SH0_INNER | \
 				 VTCR_EL2_ORGN0_WBWA | VTCR_EL2_IRGN0_WBWA | \
-				 VTCR_EL2_SL0_LVL1 | VTCR_EL2_T0SZ_40B | \
-				 VTCR_EL2_RES1)
+				 VTCR_EL2_SL0_LVL1 | VTCR_EL2_RES1)
 #define VTTBR_X		(38 - VTCR_EL2_T0SZ_40B)
 #else
 /*
@@ -163,8 +162,7 @@
  */
 #define VTCR_EL2_FLAGS		(VTCR_EL2_TG0_4K | VTCR_EL2_SH0_INNER | \
 				 VTCR_EL2_ORGN0_WBWA | VTCR_EL2_IRGN0_WBWA | \
-				 VTCR_EL2_SL0_LVL1 | VTCR_EL2_T0SZ_40B | \
-				 VTCR_EL2_RES1)
+				 VTCR_EL2_SL0_LVL1 | VTCR_EL2_RES1)
 #define VTTBR_X		(37 - VTCR_EL2_T0SZ_40B)
 #endif
 

arch/arm64/include/asm/kvm_asm.h

@@ -54,7 +54,7 @@ extern void __vgic_v3_init_lrs(void);
 
 extern u32 __kvm_get_mdcr_el2(void);
 
-extern void __init_stage2_translation(void);
+extern u32 __init_stage2_translation(void);
 
 #endif
 

arch/arm64/include/asm/kvm_host.h

@@ -369,11 +369,12 @@ int kvm_arm_vcpu_arch_get_attr(struct kvm_vcpu *vcpu,
 int kvm_arm_vcpu_arch_has_attr(struct kvm_vcpu *vcpu,
 			       struct kvm_device_attr *attr);
 
-/* #define kvm_call_hyp(f, ...) __kvm_call_hyp(kvm_ksym_ref(f), ##__VA_ARGS__) */
-
 static inline void __cpu_init_stage2(void)
 {
-	kvm_call_hyp(__init_stage2_translation);
+	u32 parange = kvm_call_hyp(__init_stage2_translation);
+
+	WARN_ONCE(parange < 40,
+		  "PARange is %d bits, unsupported configuration!", parange);
 }
 
 #endif /* __ARM64_KVM_HOST_H__ */

arch/arm64/kvm/hyp/s2-setup.c

@@ -20,9 +20,10 @@
 #include <asm/kvm_asm.h>
 #include <asm/kvm_hyp.h>
 
-void __hyp_text __init_stage2_translation(void)
+u32 __hyp_text __init_stage2_translation(void)
 {
 	u64 val = VTCR_EL2_FLAGS;
+	u64 parange;
 	u64 tmp;
 
 	/*
@@ -30,7 +31,39 @@ void __hyp_text __init_stage2_translation(void)
 	 * bits in VTCR_EL2. Amusingly, the PARange is 4 bits, while
 	 * PS is only 3. Fortunately, bit 19 is RES0 in VTCR_EL2...
 	 */
-	val |= (read_sysreg(id_aa64mmfr0_el1) & 7) << 16;
+	parange = read_sysreg(id_aa64mmfr0_el1) & 7;
+	val |= parange << 16;
+
+	/* Compute the actual PARange... */
+	switch (parange) {
+	case 0:
+		parange = 32;
+		break;
+	case 1:
+		parange = 36;
+		break;
+	case 2:
+		parange = 40;
+		break;
+	case 3:
+		parange = 42;
+		break;
+	case 4:
+		parange = 44;
+		break;
+	case 5:
+	default:
+		parange = 48;
+		break;
+	}
+
+	/*
+	 * ... and clamp it to 40 bits, unless we have some braindead
+	 * HW that implements less than that. In all cases, we'll
+	 * return that value for the rest of the kernel to decide what
+	 * to do.
+	 */
+	val |= 64 - (parange > 40 ? 40 : parange);
 
 	/*
 	 * Read the VMIDBits bits from ID_AA64MMFR1_EL1 and set the VS
@@ -42,4 +75,6 @@ void __hyp_text __init_stage2_translation(void)
 			VTCR_EL2_VS_8BIT;
 
 	write_sysreg(val, vtcr_el2);
+
+	return parange;
 }

arch/m68k/coldfire/gpio.c

@@ -158,11 +158,6 @@ static int mcfgpio_to_irq(struct gpio_chip *chip, unsigned offset)
 		return -EINVAL;
 }
 
-static struct bus_type mcfgpio_subsys = {
-	.name		= "gpio",
-	.dev_name	= "gpio",
-};
-
 static struct gpio_chip mcfgpio_chip = {
 	.label			= "mcfgpio",
 	.request		= mcfgpio_request,
@@ -178,8 +173,7 @@ static struct gpio_chip mcfgpio_chip = {
 
 static int __init mcfgpio_sysinit(void)
 {
-	gpiochip_add_data(&mcfgpio_chip, NULL);
-	return subsys_system_register(&mcfgpio_subsys, NULL);
+	return gpiochip_add_data(&mcfgpio_chip, NULL);
 }
 
 core_initcall(mcfgpio_sysinit);

arch/m68k/configs/amiga_defconfig

@@ -1,7 +1,6 @@
 CONFIG_LOCALVERSION="-amiga"
 CONFIG_SYSVIPC=y
 CONFIG_POSIX_MQUEUE=y
-CONFIG_FHANDLE=y
 CONFIG_BSD_PROCESS_ACCT=y
 CONFIG_BSD_PROCESS_ACCT_V3=y
 CONFIG_LOG_BUF_SHIFT=16
@@ -64,7 +63,6 @@ CONFIG_INET_IPCOMP=m
 CONFIG_INET_XFRM_MODE_TRANSPORT=m
 CONFIG_INET_XFRM_MODE_TUNNEL=m
 CONFIG_INET_XFRM_MODE_BEET=m
-# CONFIG_INET_LRO is not set
 CONFIG_INET_DIAG=m
 CONFIG_INET_UDP_DIAG=m
 CONFIG_IPV6=m
@@ -285,7 +283,9 @@ CONFIG_NET_MPLS_GSO=m
 CONFIG_MPLS_ROUTING=m
 CONFIG_MPLS_IPTUNNEL=m
 CONFIG_NET_L3_MASTER_DEV=y
+CONFIG_AF_KCM=m
 # CONFIG_WIRELESS is not set
+CONFIG_NET_DEVLINK=m
 # CONFIG_UEVENT_HELPER is not set
 CONFIG_DEVTMPFS=y
 CONFIG_DEVTMPFS_MOUNT=y
@@ -359,6 +359,7 @@ CONFIG_MACVTAP=m
 CONFIG_IPVLAN=m
 CONFIG_VXLAN=m
 CONFIG_GENEVE=m
+CONFIG_MACSEC=m
 CONFIG_NETCONSOLE=m
 CONFIG_NETCONSOLE_DYNAMIC=y
 CONFIG_VETH=m
@@ -452,6 +453,7 @@ CONFIG_JFS_FS=m
 CONFIG_XFS_FS=m
 CONFIG_OCFS2_FS=m
 # CONFIG_OCFS2_DEBUG_MASKLOG is not set
+CONFIG_FS_ENCRYPTION=m
 CONFIG_FANOTIFY=y
 CONFIG_QUOTA_NETLINK_INTERFACE=y
 # CONFIG_PRINT_QUOTA_WARNING is not set
@@ -468,6 +470,7 @@ CONFIG_VFAT_FS=m
 CONFIG_PROC_KCORE=y
 CONFIG_PROC_CHILDREN=y
 CONFIG_TMPFS=y
+CONFIG_ORANGEFS_FS=m
 CONFIG_AFFS_FS=m
 CONFIG_ECRYPT_FS=m
 CONFIG_ECRYPT_FS_MESSAGING=y
@@ -549,6 +552,7 @@ CONFIG_TEST_HEXDUMP=m
 CONFIG_TEST_STRING_HELPERS=m
 CONFIG_TEST_KSTRTOX=m
 CONFIG_TEST_PRINTF=m
+CONFIG_TEST_BITMAP=m
 CONFIG_TEST_RHASHTABLE=m
 CONFIG_TEST_LKM=m
 CONFIG_TEST_USER_COPY=m
@@ -557,7 +561,6 @@ CONFIG_TEST_FIRMWARE=m
 CONFIG_TEST_UDELAY=m
 CONFIG_TEST_STATIC_KEYS=m
 CONFIG_EARLY_PRINTK=y
-CONFIG_ENCRYPTED_KEYS=m
 CONFIG_CRYPTO_RSA=m
 CONFIG_CRYPTO_MANAGER=y
 CONFIG_CRYPTO_USER=m
@@ -565,12 +568,9 @@ CONFIG_CRYPTO_CRYPTD=m
 CONFIG_CRYPTO_MCRYPTD=m
 CONFIG_CRYPTO_TEST=m
 CONFIG_CRYPTO_CCM=m
-CONFIG_CRYPTO_GCM=m
 CONFIG_CRYPTO_CHACHA20POLY1305=m
-CONFIG_CRYPTO_CTS=m
 CONFIG_CRYPTO_LRW=m
 CONFIG_CRYPTO_PCBC=m
-CONFIG_CRYPTO_XTS=m
 CONFIG_CRYPTO_KEYWRAP=m
 CONFIG_CRYPTO_XCBC=m
 CONFIG_CRYPTO_VMAC=m
@@ -594,7 +594,6 @@ CONFIG_CRYPTO_SEED=m
 CONFIG_CRYPTO_SERPENT=m
 CONFIG_CRYPTO_TEA=m
 CONFIG_CRYPTO_TWOFISH=m
-CONFIG_CRYPTO_ZLIB=m
 CONFIG_CRYPTO_LZO=m
 CONFIG_CRYPTO_842=m
 CONFIG_CRYPTO_LZ4=m

arch/m68k/configs/apollo_defconfig

@@ -1,7 +1,6 @@
 CONFIG_LOCALVERSION="-apollo"
 CONFIG_SYSVIPC=y
 CONFIG_POSIX_MQUEUE=y
-CONFIG_FHANDLE=y
 CONFIG_BSD_PROCESS_ACCT=y
 CONFIG_BSD_PROCESS_ACCT_V3=y
 CONFIG_LOG_BUF_SHIFT=16
@@ -62,7 +61,6 @@ CONFIG_INET_IPCOMP=m
 CONFIG_INET_XFRM_MODE_TRANSPORT=m
 CONFIG_INET_XFRM_MODE_TUNNEL=m
 CONFIG_INET_XFRM_MODE_BEET=m
-# CONFIG_INET_LRO is not set
 CONFIG_INET_DIAG=m
 CONFIG_INET_UDP_DIAG=m
 CONFIG_IPV6=m
@@ -283,7 +281,9 @@ CONFIG_NET_MPLS_GSO=m
 CONFIG_MPLS_ROUTING=m
 CONFIG_MPLS_IPTUNNEL=m
 CONFIG_NET_L3_MASTER_DEV=y
+CONFIG_AF_KCM=m
 # CONFIG_WIRELESS is not set
+CONFIG_NET_DEVLINK=m
 # CONFIG_UEVENT_HELPER is not set
 CONFIG_DEVTMPFS=y
 CONFIG_DEVTMPFS_MOUNT=y
@@ -341,6 +341,7 @@ CONFIG_MACVTAP=m
 CONFIG_IPVLAN=m
 CONFIG_VXLAN=m
 CONFIG_GENEVE=m
+CONFIG_MACSEC=m
 CONFIG_NETCONSOLE=m
 CONFIG_NETCONSOLE_DYNAMIC=y
 CONFIG_VETH=m
@@ -411,6 +412,7 @@ CONFIG_JFS_FS=m
 CONFIG_XFS_FS=m
 CONFIG_OCFS2_FS=m
 # CONFIG_OCFS2_DEBUG_MASKLOG is not set
+CONFIG_FS_ENCRYPTION=m
 CONFIG_FANOTIFY=y
 CONFIG_QUOTA_NETLINK_INTERFACE=y
 # CONFIG_PRINT_QUOTA_WARNING is not set
@@ -427,6 +429,7 @@ CONFIG_VFAT_FS=m
 CONFIG_PROC_KCORE=y
 CONFIG_PROC_CHILDREN=y
 CONFIG_TMPFS=y
+CONFIG_ORANGEFS_FS=m
 CONFIG_AFFS_FS=m
 CONFIG_ECRYPT_FS=m
 CONFIG_ECRYPT_FS_MESSAGING=y
@@ -508,6 +511,7 @@ CONFIG_TEST_HEXDUMP=m
 CONFIG_TEST_STRING_HELPERS=m
 CONFIG_TEST_KSTRTOX=m
 CONFIG_TEST_PRINTF=m
+CONFIG_TEST_BITMAP=m
 CONFIG_TEST_RHASHTABLE=m
 CONFIG_TEST_LKM=m
 CONFIG_TEST_USER_COPY=m
@@ -516,7 +520,6 @@ CONFIG_TEST_FIRMWARE=m
 CONFIG_TEST_UDELAY=m
 CONFIG_TEST_STATIC_KEYS=m
 CONFIG_EARLY_PRINTK=y
-CONFIG_ENCRYPTED_KEYS=m
 CONFIG_CRYPTO_RSA=m
 CONFIG_CRYPTO_MANAGER=y
 CONFIG_CRYPTO_USER=m
@@ -524,12 +527,9 @@ CONFIG_CRYPTO_CRYPTD=m
 CONFIG_CRYPTO_MCRYPTD=m
 CONFIG_CRYPTO_TEST=m
 CONFIG_CRYPTO_CCM=m
-CONFIG_CRYPTO_GCM=m
 CONFIG_CRYPTO_CHACHA20POLY1305=m
-CONFIG_CRYPTO_CTS=m
 CONFIG_CRYPTO_LRW=m
 CONFIG_CRYPTO_PCBC=m
-CONFIG_CRYPTO_XTS=m
 CONFIG_CRYPTO_KEYWRAP=m
 CONFIG_CRYPTO_XCBC=m
 CONFIG_CRYPTO_VMAC=m
@@ -553,7 +553,6 @@ CONFIG_CRYPTO_SEED=m
 CONFIG_CRYPTO_SERPENT=m
 CONFIG_CRYPTO_TEA=m
 CONFIG_CRYPTO_TWOFISH=m
-CONFIG_CRYPTO_ZLIB=m
 CONFIG_CRYPTO_LZO=m
 CONFIG_CRYPTO_842=m
 CONFIG_CRYPTO_LZ4=m

arch/m68k/configs/atari_defconfig

@@ -1,7 +1,6 @@
 CONFIG_LOCALVERSION="-atari"
 CONFIG_SYSVIPC=y
 CONFIG_POSIX_MQUEUE=y
-CONFIG_FHANDLE=y
 CONFIG_BSD_PROCESS_ACCT=y
 CONFIG_BSD_PROCESS_ACCT_V3=y
 CONFIG_LOG_BUF_SHIFT=16
@@ -62,7 +61,6 @@ CONFIG_INET_IPCOMP=m
 CONFIG_INET_XFRM_MODE_TRANSPORT=m
 CONFIG_INET_XFRM_MODE_TUNNEL=m
 CONFIG_INET_XFRM_MODE_BEET=m
-# CONFIG_INET_LRO is not set
 CONFIG_INET_DIAG=m
 CONFIG_INET_UDP_DIAG=m
 CONFIG_IPV6=m
@@ -283,7 +281,9 @@ CONFIG_NET_MPLS_GSO=m
 CONFIG_MPLS_ROUTING=m
 CONFIG_MPLS_IPTUNNEL=m
 CONFIG_NET_L3_MASTER_DEV=y
+CONFIG_AF_KCM=m
 # CONFIG_WIRELESS is not set
+CONFIG_NET_DEVLINK=m
 # CONFIG_UEVENT_HELPER is not set
 CONFIG_DEVTMPFS=y
 CONFIG_DEVTMPFS_MOUNT=y
@@ -350,6 +350,7 @@ CONFIG_MACVTAP=m
 CONFIG_IPVLAN=m
 CONFIG_VXLAN=m
 CONFIG_GENEVE=m
+CONFIG_MACSEC=m
 CONFIG_NETCONSOLE=m
 CONFIG_NETCONSOLE_DYNAMIC=y
 CONFIG_VETH=m
@@ -432,6 +433,7 @@ CONFIG_JFS_FS=m
 CONFIG_XFS_FS=m
 CONFIG_OCFS2_FS=m
 # CONFIG_OCFS2_DEBUG_MASKLOG is not set
+CONFIG_FS_ENCRYPTION=m
 CONFIG_FANOTIFY=y
 CONFIG_QUOTA_NETLINK_INTERFACE=y
 # CONFIG_PRINT_QUOTA_WARNING is not set
@@ -448,6 +450,7 @@ CONFIG_VFAT_FS=m
 CONFIG_PROC_KCORE=y
 CONFIG_PROC_CHILDREN=y
 CONFIG_TMPFS=y
+CONFIG_ORANGEFS_FS=m
 CONFIG_AFFS_FS=m
 CONFIG_ECRYPT_FS=m
 CONFIG_ECRYPT_FS_MESSAGING=y
@@ -529,6 +532,7 @@ CONFIG_TEST_HEXDUMP=m
 CONFIG_TEST_STRING_HELPERS=m
 CONFIG_TEST_KSTRTOX=m
 CONFIG_TEST_PRINTF=m
+CONFIG_TEST_BITMAP=m
 CONFIG_TEST_RHASHTABLE=m
 CONFIG_TEST_LKM=m
 CONFIG_TEST_USER_COPY=m
@@ -537,7 +541,6 @@ CONFIG_TEST_FIRMWARE=m
 CONFIG_TEST_UDELAY=m
 CONFIG_TEST_STATIC_KEYS=m
 CONFIG_EARLY_PRINTK=y
-CONFIG_ENCRYPTED_KEYS=m
 CONFIG_CRYPTO_RSA=m
 CONFIG_CRYPTO_MANAGER=y
 CONFIG_CRYPTO_USER=m
@@ -545,12 +548,9 @@ CONFIG_CRYPTO_CRYPTD=m
 CONFIG_CRYPTO_MCRYPTD=m
 CONFIG_CRYPTO_TEST=m
 CONFIG_CRYPTO_CCM=m
-CONFIG_CRYPTO_GCM=m
 CONFIG_CRYPTO_CHACHA20POLY1305=m
-CONFIG_CRYPTO_CTS=m
 CONFIG_CRYPTO_LRW=m
 CONFIG_CRYPTO_PCBC=m
-CONFIG_CRYPTO_XTS=m
 CONFIG_CRYPTO_KEYWRAP=m
 CONFIG_CRYPTO_XCBC=m
 CONFIG_CRYPTO_VMAC=m
@@ -574,7 +574,6 @@ CONFIG_CRYPTO_SEED=m
 CONFIG_CRYPTO_SERPENT=m
 CONFIG_CRYPTO_TEA=m
 CONFIG_CRYPTO_TWOFISH=m
-CONFIG_CRYPTO_ZLIB=m
 CONFIG_CRYPTO_LZO=m
 CONFIG_CRYPTO_842=m
 CONFIG_CRYPTO_LZ4=m

arch/m68k/configs/bvme6000_defconfig

@@ -1,7 +1,6 @@
 CONFIG_LOCALVERSION="-bvme6000"
 CONFIG_SYSVIPC=y
 CONFIG_POSIX_MQUEUE=y
-CONFIG_FHANDLE=y
 CONFIG_BSD_PROCESS_ACCT=y
 CONFIG_BSD_PROCESS_ACCT_V3=y
 CONFIG_LOG_BUF_SHIFT=16
@@ -60,7 +59,6 @@ CONFIG_INET_IPCOMP=m
 CONFIG_INET_XFRM_MODE_TRANSPORT=m
 CONFIG_INET_XFRM_MODE_TUNNEL=m
 CONFIG_INET_XFRM_MODE_BEET=m
-# CONFIG_INET_LRO is not set
 CONFIG_INET_DIAG=m
 CONFIG_INET_UDP_DIAG=m
 CONFIG_IPV6=m
@@ -281,7 +279,9 @@ CONFIG_NET_MPLS_GSO=m
 CONFIG_MPLS_ROUTING=m
 CONFIG_MPLS_IPTUNNEL=m
 CONFIG_NET_L3_MASTER_DEV=y
+CONFIG_AF_KCM=m
 # CONFIG_WIRELESS is not set
+CONFIG_NET_DEVLINK=m
 # CONFIG_UEVENT_HELPER is not set
 CONFIG_DEVTMPFS=y
 CONFIG_DEVTMPFS_MOUNT=y
@@ -340,6 +340,7 @@ CONFIG_MACVTAP=m
 CONFIG_IPVLAN=m
 CONFIG_VXLAN=m
 CONFIG_GENEVE=m
+CONFIG_MACSEC=m
 CONFIG_NETCONSOLE=m
 CONFIG_NETCONSOLE_DYNAMIC=y
 CONFIG_VETH=m
@@ -403,6 +404,7 @@ CONFIG_JFS_FS=m
 CONFIG_XFS_FS=m
 CONFIG_OCFS2_FS=m
 # CONFIG_OCFS2_DEBUG_MASKLOG is not set
+CONFIG_FS_ENCRYPTION=m
 CONFIG_FANOTIFY=y
 CONFIG_QUOTA_NETLINK_INTERFACE=y
 # CONFIG_PRINT_QUOTA_WARNING is not set
@@ -419,6 +421,7 @@ CONFIG_VFAT_FS=m
 CONFIG_PROC_KCORE=y
 CONFIG_PROC_CHILDREN=y
 CONFIG_TMPFS=y
+CONFIG_ORANGEFS_FS=m
 CONFIG_AFFS_FS=m
 CONFIG_ECRYPT_FS=m
 CONFIG_ECRYPT_FS_MESSAGING=y
@@ -500,6 +503,7 @@ CONFIG_TEST_HEXDUMP=m
 CONFIG_TEST_STRING_HELPERS=m
 CONFIG_TEST_KSTRTOX=m
 CONFIG_TEST_PRINTF=m
+CONFIG_TEST_BITMAP=m
 CONFIG_TEST_RHASHTABLE=m
 CONFIG_TEST_LKM=m
 CONFIG_TEST_USER_COPY=m
@@ -508,7 +512,6 @@ CONFIG_TEST_FIRMWARE=m
 CONFIG_TEST_UDELAY=m
 CONFIG_TEST_STATIC_KEYS=m
 CONFIG_EARLY_PRINTK=y
-CONFIG_ENCRYPTED_KEYS=m
 CONFIG_CRYPTO_RSA=m
 CONFIG_CRYPTO_MANAGER=y
 CONFIG_CRYPTO_USER=m
@@ -516,12 +519,9 @@ CONFIG_CRYPTO_CRYPTD=m
 CONFIG_CRYPTO_MCRYPTD=m
 CONFIG_CRYPTO_TEST=m
 CONFIG_CRYPTO_CCM=m
-CONFIG_CRYPTO_GCM=m
 CONFIG_CRYPTO_CHACHA20POLY1305=m
-CONFIG_CRYPTO_CTS=m
 CONFIG_CRYPTO_LRW=m
 CONFIG_CRYPTO_PCBC=m
-CONFIG_CRYPTO_XTS=m
 CONFIG_CRYPTO_KEYWRAP=m
 CONFIG_CRYPTO_XCBC=m
 CONFIG_CRYPTO_VMAC=m
@@ -545,7 +545,6 @@ CONFIG_CRYPTO_SEED=m
 CONFIG_CRYPTO_SERPENT=m
 CONFIG_CRYPTO_TEA=m
 CONFIG_CRYPTO_TWOFISH=m
-CONFIG_CRYPTO_ZLIB=m
 CONFIG_CRYPTO_LZO=m
 CONFIG_CRYPTO_842=m
 CONFIG_CRYPTO_LZ4=m

arch/m68k/configs/hp300_defconfig

@@ -1,7 +1,6 @@
 CONFIG_LOCALVERSION="-hp300"
 CONFIG_SYSVIPC=y
 CONFIG_POSIX_MQUEUE=y
-CONFIG_FHANDLE=y
 CONFIG_BSD_PROCESS_ACCT=y
 CONFIG_BSD_PROCESS_ACCT_V3=y
 CONFIG_LOG_BUF_SHIFT=16
@@ -62,7 +61,6 @@ CONFIG_INET_IPCOMP=m
 CONFIG_INET_XFRM_MODE_TRANSPORT=m
 CONFIG_INET_XFRM_MODE_TUNNEL=m
 CONFIG_INET_XFRM_MODE_BEET=m
-# CONFIG_INET_LRO is not set
 CONFIG_INET_DIAG=m
 CONFIG_INET_UDP_DIAG=m
 CONFIG_IPV6=m
@@ -283,7 +281,9 @@ CONFIG_NET_MPLS_GSO=m
 CONFIG_MPLS_ROUTING=m
 CONFIG_MPLS_IPTUNNEL=m
 CONFIG_NET_L3_MASTER_DEV=y
+CONFIG_AF_KCM=m
 # CONFIG_WIRELESS is not set
+CONFIG_NET_DEVLINK=m
 # CONFIG_UEVENT_HELPER is not set
 CONFIG_DEVTMPFS=y
 CONFIG_DEVTMPFS_MOUNT=y
@@ -341,6 +341,7 @@ CONFIG_MACVTAP=m
 CONFIG_IPVLAN=m
 CONFIG_VXLAN=m
 CONFIG_GENEVE=m
+CONFIG_MACSEC=m
 CONFIG_NETCONSOLE=m
 CONFIG_NETCONSOLE_DYNAMIC=y
 CONFIG_VETH=m
@@ -413,6 +414,7 @@ CONFIG_JFS_FS=m
 CONFIG_XFS_FS=m
 CONFIG_OCFS2_FS=m
 # CONFIG_OCFS2_DEBUG_MASKLOG is not set
+CONFIG_FS_ENCRYPTION=m
 CONFIG_FANOTIFY=y
 CONFIG_QUOTA_NETLINK_INTERFACE=y
 # CONFIG_PRINT_QUOTA_WARNING is not set
@@ -429,6 +431,7 @@ CONFIG_VFAT_FS=m
 CONFIG_PROC_KCORE=y
 CONFIG_PROC_CHILDREN=y
 CONFIG_TMPFS=y
+CONFIG_ORANGEFS_FS=m
 CONFIG_AFFS_FS=m
 CONFIG_ECRYPT_FS=m
 CONFIG_ECRYPT_FS_MESSAGING=y
@@ -510,6 +513,7 @@ CONFIG_TEST_HEXDUMP=m
 CONFIG_TEST_STRING_HELPERS=m
 CONFIG_TEST_KSTRTOX=m
 CONFIG_TEST_PRINTF=m
+CONFIG_TEST_BITMAP=m
 CONFIG_TEST_RHASHTABLE=m
 CONFIG_TEST_LKM=m
 CONFIG_TEST_USER_COPY=m
@@ -518,7 +522,6 @@ CONFIG_TEST_FIRMWARE=m
 CONFIG_TEST_UDELAY=m
 CONFIG_TEST_STATIC_KEYS=m
 CONFIG_EARLY_PRINTK=y
-CONFIG_ENCRYPTED_KEYS=m
 CONFIG_CRYPTO_RSA=m
 CONFIG_CRYPTO_MANAGER=y
 CONFIG_CRYPTO_USER=m
@@ -526,12 +529,9 @@ CONFIG_CRYPTO_CRYPTD=m
 CONFIG_CRYPTO_MCRYPTD=m
 CONFIG_CRYPTO_TEST=m
 CONFIG_CRYPTO_CCM=m
-CONFIG_CRYPTO_GCM=m
 CONFIG_CRYPTO_CHACHA20POLY1305=m
-CONFIG_CRYPTO_CTS=m
 CONFIG_CRYPTO_LRW=m
 CONFIG_CRYPTO_PCBC=m
-CONFIG_CRYPTO_XTS=m
 CONFIG_CRYPTO_KEYWRAP=m
 CONFIG_CRYPTO_XCBC=m
 CONFIG_CRYPTO_VMAC=m
@@ -555,7 +555,6 @@ CONFIG_CRYPTO_SEED=m
 CONFIG_CRYPTO_SERPENT=m
 CONFIG_CRYPTO_TEA=m
 CONFIG_CRYPTO_TWOFISH=m
-CONFIG_CRYPTO_ZLIB=m
 CONFIG_CRYPTO_LZO=m
 CONFIG_CRYPTO_842=m
 CONFIG_CRYPTO_LZ4=m

arch/m68k/configs/mac_defconfig

@@ -1,7 +1,6 @@
 CONFIG_LOCALVERSION="-mac"
 CONFIG_SYSVIPC=y
 CONFIG_POSIX_MQUEUE=y
-CONFIG_FHANDLE=y
 CONFIG_BSD_PROCESS_ACCT=y
 CONFIG_BSD_PROCESS_ACCT_V3=y
 CONFIG_LOG_BUF_SHIFT=16
@@ -61,7 +60,6 @@ CONFIG_INET_IPCOMP=m
 CONFIG_INET_XFRM_MODE_TRANSPORT=m
 CONFIG_INET_XFRM_MODE_TUNNEL=m
 CONFIG_INET_XFRM_MODE_BEET=m
-# CONFIG_INET_LRO is not set
 CONFIG_INET_DIAG=m
 CONFIG_INET_UDP_DIAG=m
 CONFIG_IPV6=m
@@ -285,7 +283,9 @@ CONFIG_NET_MPLS_GSO=m
 CONFIG_MPLS_ROUTING=m
 CONFIG_MPLS_IPTUNNEL=m
 CONFIG_NET_L3_MASTER_DEV=y
+CONFIG_AF_KCM=m
 # CONFIG_WIRELESS is not set
+CONFIG_NET_DEVLINK=m
 # CONFIG_UEVENT_HELPER is not set
 CONFIG_DEVTMPFS=y
 CONFIG_DEVTMPFS_MOUNT=y
@@ -357,6 +357,7 @@ CONFIG_MACVTAP=m
 CONFIG_IPVLAN=m
 CONFIG_VXLAN=m
 CONFIG_GENEVE=m
+CONFIG_MACSEC=m
 CONFIG_NETCONSOLE=m
 CONFIG_NETCONSOLE_DYNAMIC=y
 CONFIG_VETH=m
@@ -435,6 +436,7 @@ CONFIG_JFS_FS=m
 CONFIG_XFS_FS=m
 CONFIG_OCFS2_FS=m
 # CONFIG_OCFS2_DEBUG_MASKLOG is not set
+CONFIG_FS_ENCRYPTION=m
 CONFIG_FANOTIFY=y
 CONFIG_QUOTA_NETLINK_INTERFACE=y
 # CONFIG_PRINT_QUOTA_WARNING is not set
@@ -451,6 +453,7 @@ CONFIG_VFAT_FS=m
 CONFIG_PROC_KCORE=y
 CONFIG_PROC_CHILDREN=y
 CONFIG_TMPFS=y
+CONFIG_ORANGEFS_FS=m
 CONFIG_AFFS_FS=m
 CONFIG_ECRYPT_FS=m
 CONFIG_ECRYPT_FS_MESSAGING=y
@@ -532,6 +535,7 @@ CONFIG_TEST_HEXDUMP=m
 CONFIG_TEST_STRING_HELPERS=m
 CONFIG_TEST_KSTRTOX=m
 CONFIG_TEST_PRINTF=m
+CONFIG_TEST_BITMAP=m
 CONFIG_TEST_RHASHTABLE=m
 CONFIG_TEST_LKM=m
 CONFIG_TEST_USER_COPY=m
@@ -540,7 +544,6 @@ CONFIG_TEST_FIRMWARE=m
 CONFIG_TEST_UDELAY=m
 CONFIG_TEST_STATIC_KEYS=m
 CONFIG_EARLY_PRINTK=y
-CONFIG_ENCRYPTED_KEYS=m
 CONFIG_CRYPTO_RSA=m
 CONFIG_CRYPTO_MANAGER=y
 CONFIG_CRYPTO_USER=m
@@ -548,12 +551,9 @@ CONFIG_CRYPTO_CRYPTD=m
 CONFIG_CRYPTO_MCRYPTD=m
 CONFIG_CRYPTO_TEST=m
 CONFIG_CRYPTO_CCM=m
-CONFIG_CRYPTO_GCM=m
 CONFIG_CRYPTO_CHACHA20POLY1305=m
-CONFIG_CRYPTO_CTS=m
 CONFIG_CRYPTO_LRW=m
 CONFIG_CRYPTO_PCBC=m
-CONFIG_CRYPTO_XTS=m
 CONFIG_CRYPTO_KEYWRAP=m
 CONFIG_CRYPTO_XCBC=m
 CONFIG_CRYPTO_VMAC=m
@@ -577,7 +577,6 @@ CONFIG_CRYPTO_SEED=m
 CONFIG_CRYPTO_SERPENT=m
 CONFIG_CRYPTO_TEA=m
 CONFIG_CRYPTO_TWOFISH=m
-CONFIG_CRYPTO_ZLIB=m
 CONFIG_CRYPTO_LZO=m
 CONFIG_CRYPTO_842=m
 CONFIG_CRYPTO_LZ4=m

arch/m68k/configs/multi_defconfig

@@ -1,7 +1,6 @@
 CONFIG_LOCALVERSION="-multi"
 CONFIG_SYSVIPC=y
 CONFIG_POSIX_MQUEUE=y
-CONFIG_FHANDLE=y
 CONFIG_BSD_PROCESS_ACCT=y
 CONFIG_BSD_PROCESS_ACCT_V3=y
 CONFIG_LOG_BUF_SHIFT=16
@@ -71,7 +70,6 @@ CONFIG_INET_IPCOMP=m
 CONFIG_INET_XFRM_MODE_TRANSPORT=m
 CONFIG_INET_XFRM_MODE_TUNNEL=m
 CONFIG_INET_XFRM_MODE_BEET=m
-# CONFIG_INET_LRO is not set
 CONFIG_INET_DIAG=m
 CONFIG_INET_UDP_DIAG=m
 CONFIG_IPV6=m
@@ -295,7 +293,9 @@ CONFIG_NET_MPLS_GSO=m
 CONFIG_MPLS_ROUTING=m
 CONFIG_MPLS_IPTUNNEL=m
 CONFIG_NET_L3_MASTER_DEV=y
+CONFIG_AF_KCM=m
 # CONFIG_WIRELESS is not set
+CONFIG_NET_DEVLINK=m
 # CONFIG_UEVENT_HELPER is not set
 CONFIG_DEVTMPFS=y
 CONFIG_DEVTMPFS_MOUNT=y
@@ -390,6 +390,7 @@ CONFIG_MACVTAP=m
 CONFIG_IPVLAN=m
 CONFIG_VXLAN=m
 CONFIG_GENEVE=m
+CONFIG_MACSEC=m
 CONFIG_NETCONSOLE=m
 CONFIG_NETCONSOLE_DYNAMIC=y
 CONFIG_VETH=m
@@ -515,6 +516,7 @@ CONFIG_JFS_FS=m
 CONFIG_XFS_FS=m
 CONFIG_OCFS2_FS=m
 # CONFIG_OCFS2_DEBUG_MASKLOG is not set
+CONFIG_FS_ENCRYPTION=m
 CONFIG_FANOTIFY=y
 CONFIG_QUOTA_NETLINK_INTERFACE=y
 # CONFIG_PRINT_QUOTA_WARNING is not set
@@ -531,6 +533,7 @@ CONFIG_VFAT_FS=m
 CONFIG_PROC_KCORE=y
 CONFIG_PROC_CHILDREN=y
 CONFIG_TMPFS=y
+CONFIG_ORANGEFS_FS=m
 CONFIG_AFFS_FS=m
 CONFIG_ECRYPT_FS=m
 CONFIG_ECRYPT_FS_MESSAGING=y
@@ -612,6 +615,7 @@ CONFIG_TEST_HEXDUMP=m
 CONFIG_TEST_STRING_HELPERS=m
 CONFIG_TEST_KSTRTOX=m
 CONFIG_TEST_PRINTF=m
+CONFIG_TEST_BITMAP=m
 CONFIG_TEST_RHASHTABLE=m
 CONFIG_TEST_LKM=m
 CONFIG_TEST_USER_COPY=m
@@ -620,7 +624,6 @@ CONFIG_TEST_FIRMWARE=m
 CONFIG_TEST_UDELAY=m
 CONFIG_TEST_STATIC_KEYS=m
 CONFIG_EARLY_PRINTK=y
-CONFIG_ENCRYPTED_KEYS=m
 CONFIG_CRYPTO_RSA=m
 CONFIG_CRYPTO_MANAGER=y
 CONFIG_CRYPTO_USER=m
@@ -628,12 +631,9 @@ CONFIG_CRYPTO_CRYPTD=m
 CONFIG_CRYPTO_MCRYPTD=m
 CONFIG_CRYPTO_TEST=m
 CONFIG_CRYPTO_CCM=m
-CONFIG_CRYPTO_GCM=m
 CONFIG_CRYPTO_CHACHA20POLY1305=m
-CONFIG_CRYPTO_CTS=m
 CONFIG_CRYPTO_LRW=m
 CONFIG_CRYPTO_PCBC=m
-CONFIG_CRYPTO_XTS=m
 CONFIG_CRYPTO_KEYWRAP=m
 CONFIG_CRYPTO_XCBC=m
 CONFIG_CRYPTO_VMAC=m
@@ -657,7 +657,6 @@ CONFIG_CRYPTO_SEED=m
 CONFIG_CRYPTO_SERPENT=m
 CONFIG_CRYPTO_TEA=m
 CONFIG_CRYPTO_TWOFISH=m
-CONFIG_CRYPTO_ZLIB=m
 CONFIG_CRYPTO_LZO=m
 CONFIG_CRYPTO_842=m
 CONFIG_CRYPTO_LZ4=m

arch/m68k/configs/mvme147_defconfig

@@ -1,7 +1,6 @@
 CONFIG_LOCALVERSION="-mvme147"
 CONFIG_SYSVIPC=y
 CONFIG_POSIX_MQUEUE=y
-CONFIG_FHANDLE=y
 CONFIG_BSD_PROCESS_ACCT=y
 CONFIG_BSD_PROCESS_ACCT_V3=y
 CONFIG_LOG_BUF_SHIFT=16
@@ -59,7 +58,6 @@ CONFIG_INET_IPCOMP=m
 CONFIG_INET_XFRM_MODE_TRANSPORT=m
 CONFIG_INET_XFRM_MODE_TUNNEL=m
 CONFIG_INET_XFRM_MODE_BEET=m
-# CONFIG_INET_LRO is not set
 CONFIG_INET_DIAG=m
 CONFIG_INET_UDP_DIAG=m
 CONFIG_IPV6=m
@@ -280,7 +278,9 @@ CONFIG_NET_MPLS_GSO=m
 CONFIG_MPLS_ROUTING=m
 CONFIG_MPLS_IPTUNNEL=m
 CONFIG_NET_L3_MASTER_DEV=y
+CONFIG_AF_KCM=m
 # CONFIG_WIRELESS is not set
+CONFIG_NET_DEVLINK=m
 # CONFIG_UEVENT_HELPER is not set
 CONFIG_DEVTMPFS=y
 CONFIG_DEVTMPFS_MOUNT=y
@@ -339,6 +339,7 @@ CONFIG_MACVTAP=m
 CONFIG_IPVLAN=m
 CONFIG_VXLAN=m
 CONFIG_GENEVE=m
+CONFIG_MACSEC=m
 CONFIG_NETCONSOLE=m
 CONFIG_NETCONSOLE_DYNAMIC=y
 CONFIG_VETH=m
@@ -403,6 +404,7 @@ CONFIG_JFS_FS=m
 CONFIG_XFS_FS=m
 CONFIG_OCFS2_FS=m
 # CONFIG_OCFS2_DEBUG_MASKLOG is not set
+CONFIG_FS_ENCRYPTION=m
 CONFIG_FANOTIFY=y
 CONFIG_QUOTA_NETLINK_INTERFACE=y
 # CONFIG_PRINT_QUOTA_WARNING is not set
@@ -419,6 +421,7 @@ CONFIG_VFAT_FS=m
 CONFIG_PROC_KCORE=y
 CONFIG_PROC_CHILDREN=y
 CONFIG_TMPFS=y
+CONFIG_ORANGEFS_FS=m
 CONFIG_AFFS_FS=m
 CONFIG_ECRYPT_FS=m
 CONFIG_ECRYPT_FS_MESSAGING=y
@@ -500,6 +503,7 @@ CONFIG_TEST_HEXDUMP=m
 CONFIG_TEST_STRING_HELPERS=m
 CONFIG_TEST_KSTRTOX=m
 CONFIG_TEST_PRINTF=m
+CONFIG_TEST_BITMAP=m
 CONFIG_TEST_RHASHTABLE=m
 CONFIG_TEST_LKM=m
 CONFIG_TEST_USER_COPY=m
@@ -508,7 +512,6 @@ CONFIG_TEST_FIRMWARE=m
 CONFIG_TEST_UDELAY=m
 CONFIG_TEST_STATIC_KEYS=m
 CONFIG_EARLY_PRINTK=y
-CONFIG_ENCRYPTED_KEYS=m
 CONFIG_CRYPTO_RSA=m
 CONFIG_CRYPTO_MANAGER=y
 CONFIG_CRYPTO_USER=m
@@ -516,12 +519,9 @@ CONFIG_CRYPTO_CRYPTD=m
 CONFIG_CRYPTO_MCRYPTD=m
 CONFIG_CRYPTO_TEST=m
 CONFIG_CRYPTO_CCM=m
-CONFIG_CRYPTO_GCM=m
 CONFIG_CRYPTO_CHACHA20POLY1305=m
-CONFIG_CRYPTO_CTS=m
 CONFIG_CRYPTO_LRW=m
 CONFIG_CRYPTO_PCBC=m
-CONFIG_CRYPTO_XTS=m
 CONFIG_CRYPTO_KEYWRAP=m
 CONFIG_CRYPTO_XCBC=m
 CONFIG_CRYPTO_VMAC=m
@@ -545,7 +545,6 @@ CONFIG_CRYPTO_SEED=m
 CONFIG_CRYPTO_SERPENT=m
 CONFIG_CRYPTO_TEA=m
 CONFIG_CRYPTO_TWOFISH=m
-CONFIG_CRYPTO_ZLIB=m
 CONFIG_CRYPTO_LZO=m
 CONFIG_CRYPTO_842=m
 CONFIG_CRYPTO_LZ4=m

arch/m68k/configs/mvme16x_defconfig

@@ -1,7 +1,6 @@
 CONFIG_LOCALVERSION="-mvme16x"
 CONFIG_SYSVIPC=y
 CONFIG_POSIX_MQUEUE=y
-CONFIG_FHANDLE=y
 CONFIG_BSD_PROCESS_ACCT=y
 CONFIG_BSD_PROCESS_ACCT_V3=y
 CONFIG_LOG_BUF_SHIFT=16
@@ -60,7 +59,6 @@ CONFIG_INET_IPCOMP=m
 CONFIG_INET_XFRM_MODE_TRANSPORT=m
 CONFIG_INET_XFRM_MODE_TUNNEL=m
 CONFIG_INET_XFRM_MODE_BEET=m
-# CONFIG_INET_LRO is not set
 CONFIG_INET_DIAG=m
 CONFIG_INET_UDP_DIAG=m
 CONFIG_IPV6=m
@@ -281,7 +279,9 @@ CONFIG_NET_MPLS_GSO=m
 CONFIG_MPLS_ROUTING=m
 CONFIG_MPLS_IPTUNNEL=m
 CONFIG_NET_L3_MASTER_DEV=y
+CONFIG_AF_KCM=m
 # CONFIG_WIRELESS is not set
+CONFIG_NET_DEVLINK=m
 # CONFIG_UEVENT_HELPER is not set
 CONFIG_DEVTMPFS=y
 CONFIG_DEVTMPFS_MOUNT=y
@@ -340,6 +340,7 @@ CONFIG_MACVTAP=m
 CONFIG_IPVLAN=m
 CONFIG_VXLAN=m
 CONFIG_GENEVE=m
+CONFIG_MACSEC=m
 CONFIG_NETCONSOLE=m
 CONFIG_NETCONSOLE_DYNAMIC=y
 CONFIG_VETH=m
@@ -403,6 +404,7 @@ CONFIG_JFS_FS=m
 CONFIG_XFS_FS=m
 CONFIG_OCFS2_FS=m
 # CONFIG_OCFS2_DEBUG_MASKLOG is not set
+CONFIG_FS_ENCRYPTION=m
 CONFIG_FANOTIFY=y
 CONFIG_QUOTA_NETLINK_INTERFACE=y
 # CONFIG_PRINT_QUOTA_WARNING is not set
@@ -419,6 +421,7 @@ CONFIG_VFAT_FS=m
 CONFIG_PROC_KCORE=y
 CONFIG_PROC_CHILDREN=y
 CONFIG_TMPFS=y
+CONFIG_ORANGEFS_FS=m
 CONFIG_AFFS_FS=m
 CONFIG_ECRYPT_FS=m
 CONFIG_ECRYPT_FS_MESSAGING=y
@@ -500,6 +503,7 @@ CONFIG_TEST_HEXDUMP=m
 CONFIG_TEST_STRING_HELPERS=m
 CONFIG_TEST_KSTRTOX=m
 CONFIG_TEST_PRINTF=m
+CONFIG_TEST_BITMAP=m
 CONFIG_TEST_RHASHTABLE=m
 CONFIG_TEST_LKM=m
 CONFIG_TEST_USER_COPY=m
@@ -508,7 +512,6 @@ CONFIG_TEST_FIRMWARE=m
 CONFIG_TEST_UDELAY=m
 CONFIG_TEST_STATIC_KEYS=m
 CONFIG_EARLY_PRINTK=y
-CONFIG_ENCRYPTED_KEYS=m
 CONFIG_CRYPTO_RSA=m
 CONFIG_CRYPTO_MANAGER=y
 CONFIG_CRYPTO_USER=m
@@ -516,12 +519,9 @@ CONFIG_CRYPTO_CRYPTD=m
 CONFIG_CRYPTO_MCRYPTD=m
 CONFIG_CRYPTO_TEST=m
 CONFIG_CRYPTO_CCM=m
-CONFIG_CRYPTO_GCM=m
 CONFIG_CRYPTO_CHACHA20POLY1305=m
-CONFIG_CRYPTO_CTS=m
 CONFIG_CRYPTO_LRW=m
 CONFIG_CRYPTO_PCBC=m
-CONFIG_CRYPTO_XTS=m
 CONFIG_CRYPTO_KEYWRAP=m
 CONFIG_CRYPTO_XCBC=m
 CONFIG_CRYPTO_VMAC=m
@@ -545,7 +545,6 @@ CONFIG_CRYPTO_SEED=m
 CONFIG_CRYPTO_SERPENT=m
 CONFIG_CRYPTO_TEA=m
 CONFIG_CRYPTO_TWOFISH=m
-CONFIG_CRYPTO_ZLIB=m
 CONFIG_CRYPTO_LZO=m
 CONFIG_CRYPTO_842=m
 CONFIG_CRYPTO_LZ4=m

arch/m68k/configs/q40_defconfig

@@ -1,7 +1,6 @@
 CONFIG_LOCALVERSION="-q40"
 CONFIG_SYSVIPC=y
 CONFIG_POSIX_MQUEUE=y
-CONFIG_FHANDLE=y
 CONFIG_BSD_PROCESS_ACCT=y
 CONFIG_BSD_PROCESS_ACCT_V3=y
 CONFIG_LOG_BUF_SHIFT=16
@@ -60,7 +59,6 @@ CONFIG_INET_IPCOMP=m
 CONFIG_INET_XFRM_MODE_TRANSPORT=m
 CONFIG_INET_XFRM_MODE_TUNNEL=m
 CONFIG_INET_XFRM_MODE_BEET=m
-# CONFIG_INET_LRO is not set
 CONFIG_INET_DIAG=m
 CONFIG_INET_UDP_DIAG=m
 CONFIG_IPV6=m
@@ -281,7 +279,9 @@ CONFIG_NET_MPLS_GSO=m
 CONFIG_MPLS_ROUTING=m
 CONFIG_MPLS_IPTUNNEL=m
 CONFIG_NET_L3_MASTER_DEV=y
+CONFIG_AF_KCM=m
 # CONFIG_WIRELESS is not set
+CONFIG_NET_DEVLINK=m
 # CONFIG_UEVENT_HELPER is not set
 CONFIG_DEVTMPFS=y
 CONFIG_DEVTMPFS_MOUNT=y
@@ -346,6 +346,7 @@ CONFIG_MACVTAP=m
 CONFIG_IPVLAN=m
 CONFIG_VXLAN=m
 CONFIG_GENEVE=m
+CONFIG_MACSEC=m
 CONFIG_NETCONSOLE=m
 CONFIG_NETCONSOLE_DYNAMIC=y
 CONFIG_VETH=m
@@ -426,6 +427,7 @@ CONFIG_JFS_FS=m
 CONFIG_XFS_FS=m
 CONFIG_OCFS2_FS=m
 # CONFIG_OCFS2_DEBUG_MASKLOG is not set
+CONFIG_FS_ENCRYPTION=m
 CONFIG_FANOTIFY=y
 CONFIG_QUOTA_NETLINK_INTERFACE=y
 # CONFIG_PRINT_QUOTA_WARNING is not set
@@ -442,6 +444,7 @@ CONFIG_VFAT_FS=m
 CONFIG_PROC_KCORE=y
 CONFIG_PROC_CHILDREN=y
 CONFIG_TMPFS=y
+CONFIG_ORANGEFS_FS=m
 CONFIG_AFFS_FS=m
 CONFIG_ECRYPT_FS=m
 CONFIG_ECRYPT_FS_MESSAGING=y
@@ -523,6 +526,7 @@ CONFIG_TEST_HEXDUMP=m
 CONFIG_TEST_STRING_HELPERS=m
 CONFIG_TEST_KSTRTOX=m
 CONFIG_TEST_PRINTF=m
+CONFIG_TEST_BITMAP=m
 CONFIG_TEST_RHASHTABLE=m
 CONFIG_TEST_LKM=m
 CONFIG_TEST_USER_COPY=m
@@ -531,7 +535,6 @@ CONFIG_TEST_FIRMWARE=m
 CONFIG_TEST_UDELAY=m
 CONFIG_TEST_STATIC_KEYS=m
 CONFIG_EARLY_PRINTK=y
-CONFIG_ENCRYPTED_KEYS=m
 CONFIG_CRYPTO_RSA=m
 CONFIG_CRYPTO_MANAGER=y
 CONFIG_CRYPTO_USER=m
@@ -539,12 +542,9 @@ CONFIG_CRYPTO_CRYPTD=m
 CONFIG_CRYPTO_MCRYPTD=m
 CONFIG_CRYPTO_TEST=m
 CONFIG_CRYPTO_CCM=m
-CONFIG_CRYPTO_GCM=m
 CONFIG_CRYPTO_CHACHA20POLY1305=m
-CONFIG_CRYPTO_CTS=m
 CONFIG_CRYPTO_LRW=m
 CONFIG_CRYPTO_PCBC=m
-CONFIG_CRYPTO_XTS=m
 CONFIG_CRYPTO_KEYWRAP=m
 CONFIG_CRYPTO_XCBC=m
 CONFIG_CRYPTO_VMAC=m
@@ -568,7 +568,6 @@ CONFIG_CRYPTO_SEED=m
 CONFIG_CRYPTO_SERPENT=m
 CONFIG_CRYPTO_TEA=m
 CONFIG_CRYPTO_TWOFISH=m
-CONFIG_CRYPTO_ZLIB=m
 CONFIG_CRYPTO_LZO=m
 CONFIG_CRYPTO_842=m
 CONFIG_CRYPTO_LZ4=m

arch/m68k/configs/sun3_defconfig

@@ -1,7 +1,6 @@
 CONFIG_LOCALVERSION="-sun3"
 CONFIG_SYSVIPC=y
 CONFIG_POSIX_MQUEUE=y
-CONFIG_FHANDLE=y
 CONFIG_BSD_PROCESS_ACCT=y
 CONFIG_BSD_PROCESS_ACCT_V3=y
 CONFIG_LOG_BUF_SHIFT=16
@@ -57,7 +56,6 @@ CONFIG_INET_IPCOMP=m
 CONFIG_INET_XFRM_MODE_TRANSPORT=m
 CONFIG_INET_XFRM_MODE_TUNNEL=m
 CONFIG_INET_XFRM_MODE_BEET=m
-# CONFIG_INET_LRO is not set
 CONFIG_INET_DIAG=m
 CONFIG_INET_UDP_DIAG=m
 CONFIG_IPV6=m
@@ -278,7 +276,9 @@ CONFIG_NET_MPLS_GSO=m
 CONFIG_MPLS_ROUTING=m
 CONFIG_MPLS_IPTUNNEL=m
 CONFIG_NET_L3_MASTER_DEV=y
+CONFIG_AF_KCM=m
 # CONFIG_WIRELESS is not set
+CONFIG_NET_DEVLINK=m
 # CONFIG_UEVENT_HELPER is not set
 CONFIG_DEVTMPFS=y
 CONFIG_DEVTMPFS_MOUNT=y
@@ -337,6 +337,7 @@ CONFIG_MACVTAP=m
 CONFIG_IPVLAN=m
 CONFIG_VXLAN=m
 CONFIG_GENEVE=m
+CONFIG_MACSEC=m
 CONFIG_NETCONSOLE=m
 CONFIG_NETCONSOLE_DYNAMIC=y
 CONFIG_VETH=m
@@ -405,6 +406,7 @@ CONFIG_JFS_FS=m
 CONFIG_XFS_FS=m
 CONFIG_OCFS2_FS=m
 # CONFIG_OCFS2_DEBUG_MASKLOG is not set
+CONFIG_FS_ENCRYPTION=m
 CONFIG_FANOTIFY=y
 CONFIG_QUOTA_NETLINK_INTERFACE=y
 # CONFIG_PRINT_QUOTA_WARNING is not set
@@ -421,6 +423,7 @@ CONFIG_VFAT_FS=m
 CONFIG_PROC_KCORE=y
 CONFIG_PROC_CHILDREN=y
 CONFIG_TMPFS=y
+CONFIG_ORANGEFS_FS=m
 CONFIG_AFFS_FS=m
 CONFIG_ECRYPT_FS=m
 CONFIG_ECRYPT_FS_MESSAGING=y
@@ -502,6 +505,7 @@ CONFIG_TEST_HEXDUMP=m
 CONFIG_TEST_STRING_HELPERS=m
 CONFIG_TEST_KSTRTOX=m
 CONFIG_TEST_PRINTF=m
+CONFIG_TEST_BITMAP=m
 CONFIG_TEST_RHASHTABLE=m
 CONFIG_TEST_LKM=m
 CONFIG_TEST_USER_COPY=m
@@ -509,7 +513,6 @@ CONFIG_TEST_BPF=m
 CONFIG_TEST_FIRMWARE=m
 CONFIG_TEST_UDELAY=m
 CONFIG_TEST_STATIC_KEYS=m
-CONFIG_ENCRYPTED_KEYS=m
 CONFIG_CRYPTO_RSA=m
 CONFIG_CRYPTO_MANAGER=y
 CONFIG_CRYPTO_USER=m
@@ -517,12 +520,9 @@ CONFIG_CRYPTO_CRYPTD=m
 CONFIG_CRYPTO_MCRYPTD=m
 CONFIG_CRYPTO_TEST=m
 CONFIG_CRYPTO_CCM=m
-CONFIG_CRYPTO_GCM=m
 CONFIG_CRYPTO_CHACHA20POLY1305=m
-CONFIG_CRYPTO_CTS=m
 CONFIG_CRYPTO_LRW=m
 CONFIG_CRYPTO_PCBC=m
-CONFIG_CRYPTO_XTS=m
 CONFIG_CRYPTO_KEYWRAP=m
 CONFIG_CRYPTO_XCBC=m
 CONFIG_CRYPTO_VMAC=m
@@ -546,7 +546,6 @@ CONFIG_CRYPTO_SEED=m
 CONFIG_CRYPTO_SERPENT=m
 CONFIG_CRYPTO_TEA=m
 CONFIG_CRYPTO_TWOFISH=m
-CONFIG_CRYPTO_ZLIB=m
 CONFIG_CRYPTO_LZO=m
 CONFIG_CRYPTO_842=m
 CONFIG_CRYPTO_LZ4=m

arch/m68k/configs/sun3x_defconfig

@@ -1,7 +1,6 @@
 CONFIG_LOCALVERSION="-sun3x"
 CONFIG_SYSVIPC=y
 CONFIG_POSIX_MQUEUE=y
-CONFIG_FHANDLE=y
 CONFIG_BSD_PROCESS_ACCT=y
 CONFIG_BSD_PROCESS_ACCT_V3=y
 CONFIG_LOG_BUF_SHIFT=16
@@ -57,7 +56,6 @@ CONFIG_INET_IPCOMP=m
 CONFIG_INET_XFRM_MODE_TRANSPORT=m
 CONFIG_INET_XFRM_MODE_TUNNEL=m
 CONFIG_INET_XFRM_MODE_BEET=m
-# CONFIG_INET_LRO is not set
 CONFIG_INET_DIAG=m
 CONFIG_INET_UDP_DIAG=m
 CONFIG_IPV6=m
@@ -278,7 +276,9 @@ CONFIG_NET_MPLS_GSO=m
 CONFIG_MPLS_ROUTING=m
 CONFIG_MPLS_IPTUNNEL=m
 CONFIG_NET_L3_MASTER_DEV=y
+CONFIG_AF_KCM=m
 # CONFIG_WIRELESS is not set
+CONFIG_NET_DEVLINK=m
 # CONFIG_UEVENT_HELPER is not set
 CONFIG_DEVTMPFS=y
 CONFIG_DEVTMPFS_MOUNT=y
@@ -337,6 +337,7 @@ CONFIG_MACVTAP=m
 CONFIG_IPVLAN=m
 CONFIG_VXLAN=m
 CONFIG_GENEVE=m
+CONFIG_MACSEC=m
 CONFIG_NETCONSOLE=m
 CONFIG_NETCONSOLE_DYNAMIC=y
 CONFIG_VETH=m
@@ -405,6 +406,7 @@ CONFIG_JFS_FS=m
 CONFIG_XFS_FS=m
 CONFIG_OCFS2_FS=m
 # CONFIG_OCFS2_DEBUG_MASKLOG is not set
+CONFIG_FS_ENCRYPTION=m
 CONFIG_FANOTIFY=y
 CONFIG_QUOTA_NETLINK_INTERFACE=y
 # CONFIG_PRINT_QUOTA_WARNING is not set
@@ -421,6 +423,7 @@ CONFIG_VFAT_FS=m
 CONFIG_PROC_KCORE=y
 CONFIG_PROC_CHILDREN=y
 CONFIG_TMPFS=y
+CONFIG_ORANGEFS_FS=m
 CONFIG_AFFS_FS=m
 CONFIG_ECRYPT_FS=m
 CONFIG_ECRYPT_FS_MESSAGING=y
@@ -502,6 +505,7 @@ CONFIG_TEST_HEXDUMP=m
 CONFIG_TEST_STRING_HELPERS=m
 CONFIG_TEST_KSTRTOX=m
 CONFIG_TEST_PRINTF=m
+CONFIG_TEST_BITMAP=m
 CONFIG_TEST_RHASHTABLE=m
 CONFIG_TEST_LKM=m
 CONFIG_TEST_USER_COPY=m
@@ -510,7 +514,6 @@ CONFIG_TEST_FIRMWARE=m
 CONFIG_TEST_UDELAY=m
 CONFIG_TEST_STATIC_KEYS=m
 CONFIG_EARLY_PRINTK=y
-CONFIG_ENCRYPTED_KEYS=m
 CONFIG_CRYPTO_RSA=m
 CONFIG_CRYPTO_MANAGER=y
 CONFIG_CRYPTO_USER=m
@@ -518,12 +521,9 @@ CONFIG_CRYPTO_CRYPTD=m
 CONFIG_CRYPTO_MCRYPTD=m
 CONFIG_CRYPTO_TEST=m
 CONFIG_CRYPTO_CCM=m
-CONFIG_CRYPTO_GCM=m
 CONFIG_CRYPTO_CHACHA20POLY1305=m
-CONFIG_CRYPTO_CTS=m
 CONFIG_CRYPTO_LRW=m
 CONFIG_CRYPTO_PCBC=m
-CONFIG_CRYPTO_XTS=m
 CONFIG_CRYPTO_KEYWRAP=m
 CONFIG_CRYPTO_XCBC=m
 CONFIG_CRYPTO_VMAC=m
@@ -547,7 +547,6 @@ CONFIG_CRYPTO_SEED=m
 CONFIG_CRYPTO_SERPENT=m
 CONFIG_CRYPTO_TEA=m
 CONFIG_CRYPTO_TWOFISH=m
-CONFIG_CRYPTO_ZLIB=m
 CONFIG_CRYPTO_LZO=m
 CONFIG_CRYPTO_842=m
 CONFIG_CRYPTO_LZ4=m

arch/m68k/include/asm/unistd.h

@@ -4,7 +4,7 @@
 #include <uapi/asm/unistd.h>
 
 
-#define NR_syscalls		377
+#define NR_syscalls		379
 
 #define __ARCH_WANT_OLD_READDIR
 #define __ARCH_WANT_OLD_STAT

arch/m68k/include/uapi/asm/unistd.h

@@ -382,5 +382,7 @@
 #define __NR_membarrier		374
 #define __NR_mlock2		375
 #define __NR_copy_file_range	376
+#define __NR_preadv2		377
+#define __NR_pwritev2		378
 
 #endif /* _UAPI_ASM_M68K_UNISTD_H_ */

arch/m68k/kernel/syscalltable.S

@@ -397,3 +397,5 @@ ENTRY(sys_call_table)
 	.long sys_membarrier
 	.long sys_mlock2		/* 375 */
 	.long sys_copy_file_range
+	.long sys_preadv2
+	.long sys_pwritev2

arch/parisc/Kconfig

@@ -4,8 +4,8 @@ config PARISC
 	select ARCH_MIGHT_HAVE_PC_PARPORT
 	select HAVE_IDE
 	select HAVE_OPROFILE
-	select HAVE_FUNCTION_TRACER if 64BIT
-	select HAVE_FUNCTION_GRAPH_TRACER if 64BIT
+	select HAVE_FUNCTION_TRACER
+	select HAVE_FUNCTION_GRAPH_TRACER
 	select ARCH_WANT_FRAME_POINTERS
 	select RTC_CLASS
 	select RTC_DRV_GENERIC

arch/parisc/Kconfig.debug

@@ -2,9 +2,13 @@ menu "Kernel hacking"
 
 source "lib/Kconfig.debug"
 
+config TRACE_IRQFLAGS_SUPPORT
+	def_bool y
+
 config DEBUG_RODATA
        bool "Write protect kernel read-only data structures"
        depends on DEBUG_KERNEL
+       default y
        help
          Mark the kernel read-only data as write-protected in the pagetables,
          in order to catch accidental (and incorrect) writes to such const

arch/parisc/Makefile

@@ -62,9 +62,7 @@ cflags-y	+= -mdisable-fpregs
 
 # Without this, "ld -r" results in .text sections that are too big
 # (> 0x40000) for branches to reach stubs.
-ifndef CONFIG_FUNCTION_TRACER
-  cflags-y	+= -ffunction-sections
-endif
+cflags-y	+= -ffunction-sections
 
 # Use long jumps instead of long branches (needed if your linker fails to
 # link a too big vmlinux executable). Not enabled for building modules.

arch/parisc/include/asm/ftrace.h

@@ -4,23 +4,7 @@
 #ifndef __ASSEMBLY__
 extern void mcount(void);
 
-/*
- * Stack of return addresses for functions of a thread.
- * Used in struct thread_info
- */
-struct ftrace_ret_stack {
-	unsigned long ret;
-	unsigned long func;
-	unsigned long long calltime;
-};
-
-/*
- * Primary handler of a function return.
- * It relays on ftrace_return_to_handler.
- * Defined in entry.S
- */
-extern void return_to_handler(void);
-
+#define MCOUNT_INSN_SIZE 4
 
 extern unsigned long return_address(unsigned int);
 

arch/parisc/kernel/Makefile

@@ -15,11 +15,7 @@ ifdef CONFIG_FUNCTION_TRACER
 # Do not profile debug and lowlevel utilities
 CFLAGS_REMOVE_ftrace.o = -pg
 CFLAGS_REMOVE_cache.o = -pg
-CFLAGS_REMOVE_irq.o = -pg
-CFLAGS_REMOVE_pacache.o = -pg
 CFLAGS_REMOVE_perf.o = -pg
-CFLAGS_REMOVE_traps.o = -pg
-CFLAGS_REMOVE_unaligned.o = -pg
 CFLAGS_REMOVE_unwind.o = -pg
 endif
 

arch/parisc/kernel/entry.S

@@ -1970,43 +1970,98 @@ pt_regs_ok:
 	b	intr_restore
 	copy	%r25,%r16
 
-	.import schedule,code
 syscall_do_resched:
-	BL	schedule,%r2
+	load32	syscall_check_resched,%r2 /* if resched, we start over again */
+	load32	schedule,%r19
+	bv	%r0(%r19)		/* jumps to schedule() */
 #ifdef CONFIG_64BIT
 	ldo	-16(%r30),%r29		/* Reference param save area */
 #else
 	nop
 #endif
-	b	syscall_check_resched	/* if resched, we start over again */
-	nop
 ENDPROC(syscall_exit)
 
 
 #ifdef CONFIG_FUNCTION_TRACER
+
 	.import ftrace_function_trampoline,code
-ENTRY(_mcount)
-	copy	%r3, %arg2
+	.align L1_CACHE_BYTES
+	.globl mcount
+	.type  mcount, @function
+ENTRY(mcount)
+_mcount:
+	.export _mcount,data
+	.proc
+	.callinfo caller,frame=0
+	.entry
+	/*
+	 * The 64bit mcount() function pointer needs 4 dwords, of which the
+	 * first two are free.  We optimize it here and put 2 instructions for
+	 * calling mcount(), and 2 instructions for ftrace_stub().  That way we
+	 * have all on one L1 cacheline.
+	 */
 	b	ftrace_function_trampoline
+	copy	%r3, %arg2	/* caller original %sp */
+ftrace_stub:
+	.globl ftrace_stub
+        .type  ftrace_stub, @function
+#ifdef CONFIG_64BIT
+	bve	(%rp)
+#else
+	bv	%r0(%rp)
+#endif
 	nop
-ENDPROC(_mcount)
+#ifdef CONFIG_64BIT
+	.dword mcount
+	.dword 0 /* code in head.S puts value of global gp here */
+#endif
+	.exit
+	.procend
+ENDPROC(mcount)
 
+	.align 8
+	.globl return_to_handler
+	.type  return_to_handler, @function
 ENTRY(return_to_handler)
-	load32	return_trampoline, %rp
-	copy	%ret0, %arg0
-	copy	%ret1, %arg1
-	b	ftrace_return_to_handler
-	nop
-return_trampoline:
-	copy	%ret0, %rp
-	copy	%r23, %ret0
-	copy	%r24, %ret1
+	.proc
+	.callinfo caller,frame=FRAME_SIZE
+	.entry
+	.export parisc_return_to_handler,data
+parisc_return_to_handler:
+	copy %r3,%r1
+	STREG %r0,-RP_OFFSET(%sp)	/* store 0 as %rp */
+	copy %sp,%r3
+	STREGM %r1,FRAME_SIZE(%sp)
+	STREG %ret0,8(%r3)
+	STREG %ret1,16(%r3)
 
-.globl ftrace_stub
-ftrace_stub:
+#ifdef CONFIG_64BIT
+	loadgp
+#endif
+
+	/* call ftrace_return_to_handler(0) */
+#ifdef CONFIG_64BIT
+	ldo -16(%sp),%ret1		/* Reference param save area */
+#endif
+	BL ftrace_return_to_handler,%r2
+	ldi 0,%r26
+	copy %ret0,%rp
+
+	/* restore original return values */
+	LDREG 8(%r3),%ret0
+	LDREG 16(%r3),%ret1
+
+	/* return from function */
+#ifdef CONFIG_64BIT
+	bve	(%rp)
+#else
 	bv	%r0(%rp)
-	nop
+#endif
+	LDREGM -FRAME_SIZE(%sp),%r3
+	.exit
+	.procend
 ENDPROC(return_to_handler)
+
 #endif	/* CONFIG_FUNCTION_TRACER */
 
 #ifdef CONFIG_IRQSTACKS

arch/parisc/kernel/ftrace.c

@@ -1,6 +1,6 @@
 /*
  * Code for tracing calls in Linux kernel.
- * Copyright (C) 2009 Helge Deller <deller@gmx.de>
+ * Copyright (C) 2009-2016 Helge Deller <deller@gmx.de>
  *
  * based on code for x86 which is:
  * Copyright (C) 2007-2008 Steven Rostedt <srostedt@redhat.com>
@@ -13,104 +13,21 @@
 #include <linux/init.h>
 #include <linux/ftrace.h>
 
+#include <asm/assembly.h>
 #include <asm/sections.h>
 #include <asm/ftrace.h>
 
 
-
 #ifdef CONFIG_FUNCTION_GRAPH_TRACER
-
-/* Add a function return address to the trace stack on thread info.*/
-static int push_return_trace(unsigned long ret, unsigned long long time,
-				unsigned long func, int *depth)
-{
-	int index;
-
-	if (!current->ret_stack)
-		return -EBUSY;
-
-	/* The return trace stack is full */
-	if (current->curr_ret_stack == FTRACE_RETFUNC_DEPTH - 1) {
-		atomic_inc(&current->trace_overrun);
-		return -EBUSY;
-	}
-
-	index = ++current->curr_ret_stack;
-	barrier();
-	current->ret_stack[index].ret = ret;
-	current->ret_stack[index].func = func;
-	current->ret_stack[index].calltime = time;
-	*depth = index;
-
-	return 0;
-}
-
-/* Retrieve a function return address to the trace stack on thread info.*/
-static void pop_return_trace(struct ftrace_graph_ret *trace, unsigned long *ret)
-{
-	int index;
-
-	index = current->curr_ret_stack;
-
-	if (unlikely(index < 0)) {
-		ftrace_graph_stop();
-		WARN_ON(1);
-		/* Might as well panic, otherwise we have no where to go */
-		*ret = (unsigned long)
-			dereference_function_descriptor(&panic);
-		return;
-	}
-
-	*ret = current->ret_stack[index].ret;
-	trace->func = current->ret_stack[index].func;
-	trace->calltime = current->ret_stack[index].calltime;
-	trace->overrun = atomic_read(&current->trace_overrun);
-	trace->depth = index;
-	barrier();
-	current->curr_ret_stack--;
-
-}
-
-/*
- * Send the trace to the ring-buffer.
- * @return the original return address.
- */
-unsigned long ftrace_return_to_handler(unsigned long retval0,
-				       unsigned long retval1)
-{
-	struct ftrace_graph_ret trace;
-	unsigned long ret;
-
-	pop_return_trace(&trace, &ret);
-	trace.rettime = local_clock();
-	ftrace_graph_return(&trace);
-
-	if (unlikely(!ret)) {
-		ftrace_graph_stop();
-		WARN_ON(1);
-		/* Might as well panic. What else to do? */
-		ret = (unsigned long)
-			dereference_function_descriptor(&panic);
-	}
-
-	/* HACK: we hand over the old functions' return values
-	   in %r23 and %r24. Assembly in entry.S will take care
-	   and move those to their final registers %ret0 and %ret1 */
-	asm( "copy %0, %%r23 \n\t"
-	     "copy %1, %%r24 \n" : : "r" (retval0), "r" (retval1) );
-
-	return ret;
-}
-
 /*
  * Hook the return address and push it in the stack of return addrs
  * in current thread info.
  */
-void prepare_ftrace_return(unsigned long *parent, unsigned long self_addr)
+static void prepare_ftrace_return(unsigned long *parent, unsigned long self_addr)
 {
 	unsigned long old;
-	unsigned long long calltime;
 	struct ftrace_graph_ent trace;
+	extern int parisc_return_to_handler;
 
 	if (unlikely(ftrace_graph_is_dead()))
 		return;
@@ -119,64 +36,47 @@ void prepare_ftrace_return(unsigned long *parent, unsigned long self_addr)
 		return;
 
 	old = *parent;
-	*parent = (unsigned long)
-		  dereference_function_descriptor(&return_to_handler);
 
-	if (unlikely(!__kernel_text_address(old))) {
-		ftrace_graph_stop();
-		*parent = old;
-		WARN_ON(1);
-		return;
-	}
-
-	calltime = local_clock();
+	trace.func = self_addr;
+	trace.depth = current->curr_ret_stack + 1;
 
-	if (push_return_trace(old, calltime,
-				self_addr, &trace.depth) == -EBUSY) {
-		*parent = old;
+	/* Only trace if the calling function expects to */
+	if (!ftrace_graph_entry(&trace))
 		return;
-	}
 
-	trace.func = self_addr;
+        if (ftrace_push_return_trace(old, self_addr, &trace.depth,
+			0 ) == -EBUSY)
+                return;
 
-	/* Only trace if the calling function expects to */
-	if (!ftrace_graph_entry(&trace)) {
-		current->curr_ret_stack--;
-		*parent = old;
-	}
+	/* activate parisc_return_to_handler() as return point */
+	*parent = (unsigned long) &parisc_return_to_handler;
 }
-
 #endif /* CONFIG_FUNCTION_GRAPH_TRACER */
 
-
-void ftrace_function_trampoline(unsigned long parent,
+void notrace ftrace_function_trampoline(unsigned long parent,
 				unsigned long self_addr,
 				unsigned long org_sp_gr3)
 {
-	extern ftrace_func_t ftrace_trace_function;
+	extern ftrace_func_t ftrace_trace_function;  /* depends on CONFIG_DYNAMIC_FTRACE */
+	extern int ftrace_graph_entry_stub(struct ftrace_graph_ent *trace);
 
 	if (ftrace_trace_function != ftrace_stub) {
-		ftrace_trace_function(parent, self_addr);
+		/* struct ftrace_ops *op, struct pt_regs *regs); */
+		ftrace_trace_function(parent, self_addr, NULL, NULL);
 		return;
 	}
+
 #ifdef CONFIG_FUNCTION_GRAPH_TRACER
-	if (ftrace_graph_entry && ftrace_graph_return) {
-		unsigned long sp;
+	if (ftrace_graph_return != (trace_func_graph_ret_t) ftrace_stub ||
+		ftrace_graph_entry != ftrace_graph_entry_stub) {
 		unsigned long *parent_rp;
 
-                asm volatile ("copy %%r30, %0" : "=r"(sp));
-		/* sanity check: is stack pointer which we got from
-		   assembler function in entry.S in a reasonable
-		   range compared to current stack pointer? */
-		if ((sp - org_sp_gr3) > 0x400)
-			return;
-
 		/* calculate pointer to %rp in stack */
-		parent_rp = (unsigned long *) org_sp_gr3 - 0x10;
+		parent_rp = (unsigned long *) (org_sp_gr3 - RP_OFFSET);
 		/* sanity check: parent_rp should hold parent */
 		if (*parent_rp != parent)
 			return;
-		
+
 		prepare_ftrace_return(parent_rp, self_addr);
 		return;
 	}

arch/parisc/kernel/head.S

@@ -129,6 +129,15 @@ $pgt_fill_loop:
 	/* And the stack pointer too */
 	ldo             THREAD_SZ_ALGN(%r6),%sp
 
+#if defined(CONFIG_64BIT) && defined(CONFIG_FUNCTION_TRACER)
+	.import _mcount,data
+	/* initialize mcount FPTR */
+	/* Get the global data pointer */
+	loadgp
+	load32		PA(_mcount), %r10
+	std		%dp,0x18(%r10)
+#endif
+
 #ifdef CONFIG_SMP
 	/* Set the smp rendezvous address into page zero.
 	** It would be safer to do this in init_smp_config() but

arch/sh/include/asm/smp.h

@@ -34,11 +34,6 @@ enum {
 DECLARE_PER_CPU(int, cpu_state);
 
 void smp_message_recv(unsigned int msg);
-void smp_timer_broadcast(const struct cpumask *mask);
-
-void local_timer_interrupt(void);
-void local_timer_setup(unsigned int cpu);
-void local_timer_stop(unsigned int cpu);
 
 void arch_send_call_function_single_ipi(int cpu);
 void arch_send_call_function_ipi_mask(const struct cpumask *mask);

arch/sh/include/asm/topology.h

@@ -17,7 +17,7 @@
 
 #define mc_capable()    (1)
 
-const struct cpumask *cpu_coregroup_mask(unsigned int cpu);
+const struct cpumask *cpu_coregroup_mask(int cpu);
 
 extern cpumask_t cpu_core_map[NR_CPUS];
 

arch/sh/kernel/cpu/sh4a/smp-shx3.c

@@ -73,8 +73,6 @@ static void shx3_prepare_cpus(unsigned int max_cpus)
 {
 	int i;
 
-	local_timer_setup(0);
-
 	BUILD_BUG_ON(SMP_MSG_NR >= 8);
 
 	for (i = 0; i < SMP_MSG_NR; i++)

arch/sh/kernel/topology.c

@@ -21,7 +21,7 @@ static DEFINE_PER_CPU(struct cpu, cpu_devices);
 cpumask_t cpu_core_map[NR_CPUS];
 EXPORT_SYMBOL(cpu_core_map);
 
-static cpumask_t cpu_coregroup_map(unsigned int cpu)
+static cpumask_t cpu_coregroup_map(int cpu)
 {
 	/*
 	 * Presently all SH-X3 SMP cores are multi-cores, so just keep it
@@ -30,7 +30,7 @@ static cpumask_t cpu_coregroup_map(unsigned int cpu)
 	return *cpu_possible_mask;
 }
 
-const struct cpumask *cpu_coregroup_mask(unsigned int cpu)
+const struct cpumask *cpu_coregroup_mask(int cpu)
 {
 	return &cpu_core_map[cpu];
 }

arch/x86/boot/compressed/Makefile

@@ -26,7 +26,7 @@ targets := vmlinux vmlinux.bin vmlinux.bin.gz vmlinux.bin.bz2 vmlinux.bin.lzma \
 	vmlinux.bin.xz vmlinux.bin.lzo vmlinux.bin.lz4
 
 KBUILD_CFLAGS := -m$(BITS) -D__KERNEL__ $(LINUX_INCLUDE) -O2
-KBUILD_CFLAGS += -fno-strict-aliasing -fPIC
+KBUILD_CFLAGS += -fno-strict-aliasing $(call cc-option, -fPIE, -fPIC)
 KBUILD_CFLAGS += -DDISABLE_BRANCH_PROFILING
 cflags-$(CONFIG_X86_32) := -march=i386
 cflags-$(CONFIG_X86_64) := -mcmodel=small
@@ -40,6 +40,18 @@ GCOV_PROFILE := n
 UBSAN_SANITIZE :=n
 
 LDFLAGS := -m elf_$(UTS_MACHINE)
+ifeq ($(CONFIG_RELOCATABLE),y)
+# If kernel is relocatable, build compressed kernel as PIE.
+ifeq ($(CONFIG_X86_32),y)
+LDFLAGS += $(call ld-option, -pie) $(call ld-option, --no-dynamic-linker)
+else
+# To build 64-bit compressed kernel as PIE, we disable relocation
+# overflow check to avoid relocation overflow error with a new linker
+# command-line option, -z noreloc-overflow.
+LDFLAGS += $(shell $(LD) --help 2>&1 | grep -q "\-z noreloc-overflow" \
+	&& echo "-z noreloc-overflow -pie --no-dynamic-linker")
+endif
+endif
 LDFLAGS_vmlinux := -T
 
 hostprogs-y	:= mkpiggy

arch/x86/boot/compressed/head_32.S

@@ -31,6 +31,34 @@
 #include <asm/asm-offsets.h>
 #include <asm/bootparam.h>
 
+/*
+ * The 32-bit x86 assembler in binutils 2.26 will generate R_386_GOT32X
+ * relocation to get the symbol address in PIC.  When the compressed x86
+ * kernel isn't built as PIC, the linker optimizes R_386_GOT32X
+ * relocations to their fixed symbol addresses.  However, when the
+ * compressed x86 kernel is loaded at a different address, it leads
+ * to the following load failure:
+ *
+ *   Failed to allocate space for phdrs
+ *
+ * during the decompression stage.
+ *
+ * If the compressed x86 kernel is relocatable at run-time, it should be
+ * compiled with -fPIE, instead of -fPIC, if possible and should be built as
+ * Position Independent Executable (PIE) so that linker won't optimize
+ * R_386_GOT32X relocation to its fixed symbol address.  Older
+ * linkers generate R_386_32 relocations against locally defined symbols,
+ * _bss, _ebss, _got and _egot, in PIE.  It isn't wrong, just less
+ * optimal than R_386_RELATIVE.  But the x86 kernel fails to properly handle
+ * R_386_32 relocations when relocating the kernel.  To generate
+ * R_386_RELATIVE relocations, we mark _bss, _ebss, _got and _egot as
+ * hidden:
+ */
+	.hidden _bss
+	.hidden _ebss
+	.hidden _got
+	.hidden _egot
+
 	__HEAD
 ENTRY(startup_32)
 #ifdef CONFIG_EFI_STUB

arch/x86/boot/compressed/head_64.S

@@ -33,6 +33,14 @@
 #include <asm/asm-offsets.h>
 #include <asm/bootparam.h>
 
+/*
+ * Locally defined symbols should be marked hidden:
+ */
+	.hidden _bss
+	.hidden _ebss
+	.hidden _got
+	.hidden _egot
+
 	__HEAD
 	.code32
 ENTRY(startup_32)

arch/x86/events/intel/core.c

@@ -3639,6 +3639,7 @@ __init int intel_pmu_init(void)
 
 	case 78: /* 14nm Skylake Mobile */
 	case 94: /* 14nm Skylake Desktop */
+	case 85: /* 14nm Skylake Server */
 		x86_pmu.late_ack = true;
 		memcpy(hw_cache_event_ids, skl_hw_cache_event_ids, sizeof(hw_cache_event_ids));
 		memcpy(hw_cache_extra_regs, skl_hw_cache_extra_regs, sizeof(hw_cache_extra_regs));

arch/x86/events/intel/rapl.c

@@ -744,6 +744,7 @@ static const struct x86_cpu_id rapl_cpu_match[] __initconst = {
 	X86_RAPL_MODEL_MATCH(79, hsx_rapl_init),	/* Broadwell-Server */
 	X86_RAPL_MODEL_MATCH(60, hsw_rapl_init),	/* Haswell */
 	X86_RAPL_MODEL_MATCH(69, hsw_rapl_init),	/* Haswell-Celeron */
+	X86_RAPL_MODEL_MATCH(70, hsw_rapl_init),	/* Haswell GT3e */
 	X86_RAPL_MODEL_MATCH(61, hsw_rapl_init),	/* Broadwell */
 	X86_RAPL_MODEL_MATCH(71, hsw_rapl_init),	/* Broadwell-H */
 	X86_RAPL_MODEL_MATCH(45, snbep_rapl_init),	/* Sandy Bridge-EP */

arch/x86/kernel/cpu/mcheck/mce-genpool.c

@@ -29,7 +29,7 @@ static char gen_pool_buf[MCE_POOLSZ];
 void mce_gen_pool_process(void)
 {
 	struct llist_node *head;
-	struct mce_evt_llist *node;
+	struct mce_evt_llist *node, *tmp;
 	struct mce *mce;
 
 	head = llist_del_all(&mce_event_llist);
@@ -37,7 +37,7 @@ void mce_gen_pool_process(void)
 		return;
 
 	head = llist_reverse_order(head);
-	llist_for_each_entry(node, head, llnode) {
+	llist_for_each_entry_safe(node, tmp, head, llnode) {
 		mce = &node->mce;
 		atomic_notifier_call_chain(&x86_mce_decoder_chain, 0, mce);
 		gen_pool_free(mce_evt_pool, (unsigned long)node, sizeof(*node));

arch/x86/kernel/setup.c

@@ -146,6 +146,31 @@ int default_check_phys_apicid_present(int phys_apicid)
 
 struct boot_params boot_params;
 
+/*
+ * Machine setup..
+ */
+static struct resource data_resource = {
+	.name	= "Kernel data",
+	.start	= 0,
+	.end	= 0,
+	.flags	= IORESOURCE_BUSY | IORESOURCE_SYSTEM_RAM
+};
+
+static struct resource code_resource = {
+	.name	= "Kernel code",
+	.start	= 0,
+	.end	= 0,
+	.flags	= IORESOURCE_BUSY | IORESOURCE_SYSTEM_RAM
+};
+
+static struct resource bss_resource = {
+	.name	= "Kernel bss",
+	.start	= 0,
+	.end	= 0,
+	.flags	= IORESOURCE_BUSY | IORESOURCE_SYSTEM_RAM
+};
+
+
 #ifdef CONFIG_X86_32
 /* cpu data as detected by the assembly code in head.S */
 struct cpuinfo_x86 new_cpu_data = {
@@ -924,6 +949,13 @@ void __init setup_arch(char **cmdline_p)
 
 	mpx_mm_init(&init_mm);
 
+	code_resource.start = __pa_symbol(_text);
+	code_resource.end = __pa_symbol(_etext)-1;
+	data_resource.start = __pa_symbol(_etext);
+	data_resource.end = __pa_symbol(_edata)-1;
+	bss_resource.start = __pa_symbol(__bss_start);
+	bss_resource.end = __pa_symbol(__bss_stop)-1;
+
 #ifdef CONFIG_CMDLINE_BOOL
 #ifdef CONFIG_CMDLINE_OVERRIDE
 	strlcpy(boot_command_line, builtin_cmdline, COMMAND_LINE_SIZE);
@@ -987,6 +1019,11 @@ void __init setup_arch(char **cmdline_p)
 
 	x86_init.resources.probe_roms();
 
+	/* after parse_early_param, so could debug it */
+	insert_resource(&iomem_resource, &code_resource);
+	insert_resource(&iomem_resource, &data_resource);
+	insert_resource(&iomem_resource, &bss_resource);
+
 	e820_add_kernel_range();
 	trim_bios_range();
 #ifdef CONFIG_X86_32

arch/x86/kvm/cpuid.c

@@ -534,6 +534,7 @@ static inline int __do_cpuid_ent(struct kvm_cpuid_entry2 *entry, u32 function,
 			do_cpuid_1_ent(&entry[i], function, idx);
 			if (idx == 1) {
 				entry[i].eax &= kvm_cpuid_D_1_eax_x86_features;
+				cpuid_mask(&entry[i].eax, CPUID_D_1_EAX);
 				entry[i].ebx = 0;
 				if (entry[i].eax & (F(XSAVES)|F(XSAVEC)))
 					entry[i].ebx =

arch/x86/kvm/mmu.h

@@ -173,10 +173,9 @@ static inline u8 permission_fault(struct kvm_vcpu *vcpu, struct kvm_mmu *mmu,
 	int index = (pfec >> 1) +
 		    (smap >> (X86_EFLAGS_AC_BIT - PFERR_RSVD_BIT + 1));
 	bool fault = (mmu->permissions[index] >> pte_access) & 1;
+	u32 errcode = PFERR_PRESENT_MASK;
 
 	WARN_ON(pfec & (PFERR_PK_MASK | PFERR_RSVD_MASK));
-	pfec |= PFERR_PRESENT_MASK;
-
 	if (unlikely(mmu->pkru_mask)) {
 		u32 pkru_bits, offset;
 
@@ -189,15 +188,15 @@ static inline u8 permission_fault(struct kvm_vcpu *vcpu, struct kvm_mmu *mmu,
 		pkru_bits = (kvm_read_pkru(vcpu) >> (pte_pkey * 2)) & 3;
 
 		/* clear present bit, replace PFEC.RSVD with ACC_USER_MASK. */
-		offset = pfec - 1 +
+		offset = (pfec & ~1) +
 			((pte_access & PT_USER_MASK) << (PFERR_RSVD_BIT - PT_USER_SHIFT));
 
 		pkru_bits &= mmu->pkru_mask >> offset;
-		pfec |= -pkru_bits & PFERR_PK_MASK;
+		errcode |= -pkru_bits & PFERR_PK_MASK;
 		fault |= (pkru_bits != 0);
 	}
 
-	return -(uint32_t)fault & pfec;
+	return -(u32)fault & errcode;
 }
 
 void kvm_mmu_invalidate_zap_all_pages(struct kvm *kvm);

arch/x86/kvm/paging_tmpl.h

@@ -360,7 +360,7 @@ retry_walk:
 			goto error;
 
 		if (unlikely(is_rsvd_bits_set(mmu, pte, walker->level))) {
-			errcode |= PFERR_RSVD_MASK | PFERR_PRESENT_MASK;
+			errcode = PFERR_RSVD_MASK | PFERR_PRESENT_MASK;
 			goto error;
 		}
 

arch/x86/kvm/x86.c

@@ -700,7 +700,6 @@ static int __kvm_set_xcr(struct kvm_vcpu *vcpu, u32 index, u64 xcr)
 		if ((xcr0 & XFEATURE_MASK_AVX512) != XFEATURE_MASK_AVX512)
 			return 1;
 	}
-	kvm_put_guest_xcr0(vcpu);
 	vcpu->arch.xcr0 = xcr0;
 
 	if ((xcr0 ^ old_xcr0) & XFEATURE_MASK_EXTEND)
@@ -6590,8 +6589,6 @@ static int vcpu_enter_guest(struct kvm_vcpu *vcpu)
 	kvm_x86_ops->prepare_guest_switch(vcpu);
 	if (vcpu->fpu_active)
 		kvm_load_guest_fpu(vcpu);
-	kvm_load_guest_xcr0(vcpu);
-
 	vcpu->mode = IN_GUEST_MODE;
 
 	srcu_read_unlock(&vcpu->kvm->srcu, vcpu->srcu_idx);
@@ -6618,6 +6615,8 @@ static int vcpu_enter_guest(struct kvm_vcpu *vcpu)
 		goto cancel_injection;
 	}
 
+	kvm_load_guest_xcr0(vcpu);
+
 	if (req_immediate_exit)
 		smp_send_reschedule(vcpu->cpu);
 
@@ -6667,6 +6666,8 @@ static int vcpu_enter_guest(struct kvm_vcpu *vcpu)
 	vcpu->mode = OUTSIDE_GUEST_MODE;
 	smp_wmb();
 
+	kvm_put_guest_xcr0(vcpu);
+
 	/* Interrupt is enabled by handle_external_intr() */
 	kvm_x86_ops->handle_external_intr(vcpu);
 
@@ -7314,7 +7315,6 @@ void kvm_load_guest_fpu(struct kvm_vcpu *vcpu)
 	 * and assume host would use all available bits.
 	 * Guest xcr0 would be loaded later.
 	 */
-	kvm_put_guest_xcr0(vcpu);
 	vcpu->guest_fpu_loaded = 1;
 	__kernel_fpu_begin();
 	__copy_kernel_to_fpregs(&vcpu->arch.guest_fpu.state);
@@ -7323,8 +7323,6 @@ void kvm_load_guest_fpu(struct kvm_vcpu *vcpu)
 
 void kvm_put_guest_fpu(struct kvm_vcpu *vcpu)
 {
-	kvm_put_guest_xcr0(vcpu);
-
 	if (!vcpu->guest_fpu_loaded) {
 		vcpu->fpu_counter = 0;
 		return;

block/partition-generic.c

@@ -361,15 +361,20 @@ struct hd_struct *add_partition(struct gendisk *disk, int partno,
 			goto out_del;
 	}
 
+	err = hd_ref_init(p);
+	if (err) {
+		if (flags & ADDPART_FLAG_WHOLEDISK)
+			goto out_remove_file;
+		goto out_del;
+	}
+
 	/* everything is up and running, commence */
 	rcu_assign_pointer(ptbl->part[partno], p);
 
 	/* suppress uevent if the disk suppresses it */
 	if (!dev_get_uevent_suppress(ddev))
 		kobject_uevent(&pdev->kobj, KOBJ_ADD);
-
-	if (!hd_ref_init(p))
-		return p;
+	return p;
 
 out_free_info:
 	free_part_info(p);
@@ -378,6 +383,8 @@ out_free_stats:
 out_free:
 	kfree(p);
 	return ERR_PTR(err);
+out_remove_file:
+	device_remove_file(pdev, &dev_attr_whole_disk);
 out_del:
 	kobject_put(p->holder_dir);
 	device_del(pdev);

drivers/block/loop.c

@@ -488,6 +488,12 @@ static int lo_rw_aio(struct loop_device *lo, struct loop_cmd *cmd,
 	bvec = __bvec_iter_bvec(bio->bi_io_vec, bio->bi_iter);
 	iov_iter_bvec(&iter, ITER_BVEC | rw, bvec,
 		      bio_segments(bio), blk_rq_bytes(cmd->rq));
+	/*
+	 * This bio may be started from the middle of the 'bvec'
+	 * because of bio splitting, so offset from the bvec must
+	 * be passed to iov iterator
+	 */
+	iter.iov_offset = bio->bi_iter.bi_bvec_done;
 
 	cmd->iocb.ki_pos = pos;
 	cmd->iocb.ki_filp = file;

drivers/bus/mvebu-mbus.c

@@ -972,7 +972,7 @@ int mvebu_mbus_get_dram_win_info(phys_addr_t phyaddr, u8 *target, u8 *attr)
 		}
 	}
 
-	pr_err("invalid dram address 0x%x\n", phyaddr);
+	pr_err("invalid dram address %pa\n", &phyaddr);
 	return -EINVAL;
 }
 EXPORT_SYMBOL_GPL(mvebu_mbus_get_dram_win_info);

drivers/bus/uniphier-system-bus.c

@@ -108,7 +108,7 @@ static int uniphier_system_bus_check_overlap(
 
 	for (i = 0; i < ARRAY_SIZE(priv->bank); i++) {
 		for (j = i + 1; j < ARRAY_SIZE(priv->bank); j++) {
-			if (priv->bank[i].end > priv->bank[j].base ||
+			if (priv->bank[i].end > priv->bank[j].base &&
 			    priv->bank[i].base < priv->bank[j].end) {
 				dev_err(priv->dev,
 					"region overlap between bank%d and bank%d\n",

drivers/char/hw_random/bcm63xx-rng.c

@@ -12,6 +12,7 @@
 #include <linux/clk.h>
 #include <linux/platform_device.h>
 #include <linux/hw_random.h>
+#include <linux/of.h>
 
 #define RNG_CTRL			0x00
 #define RNG_EN				(1 << 0)

drivers/dma/dw/core.c

@@ -130,26 +130,14 @@ static void dwc_desc_put(struct dw_dma_chan *dwc, struct dw_desc *desc)
 static void dwc_initialize(struct dw_dma_chan *dwc)
 {
 	struct dw_dma *dw = to_dw_dma(dwc->chan.device);
-	struct dw_dma_slave *dws = dwc->chan.private;
 	u32 cfghi = DWC_CFGH_FIFO_MODE;
 	u32 cfglo = DWC_CFGL_CH_PRIOR(dwc->priority);
 
 	if (dwc->initialized == true)
 		return;
 
-	if (dws) {
-		/*
-		 * We need controller-specific data to set up slave
-		 * transfers.
-		 */
-		BUG_ON(!dws->dma_dev || dws->dma_dev != dw->dma.dev);
-
-		cfghi |= DWC_CFGH_DST_PER(dws->dst_id);
-		cfghi |= DWC_CFGH_SRC_PER(dws->src_id);
-	} else {
-		cfghi |= DWC_CFGH_DST_PER(dwc->dst_id);
-		cfghi |= DWC_CFGH_SRC_PER(dwc->src_id);
-	}
+	cfghi |= DWC_CFGH_DST_PER(dwc->dst_id);
+	cfghi |= DWC_CFGH_SRC_PER(dwc->src_id);
 
 	channel_writel(dwc, CFG_LO, cfglo);
 	channel_writel(dwc, CFG_HI, cfghi);
@@ -941,7 +929,7 @@ bool dw_dma_filter(struct dma_chan *chan, void *param)
 	struct dw_dma_chan *dwc = to_dw_dma_chan(chan);
 	struct dw_dma_slave *dws = param;
 
-	if (!dws || dws->dma_dev != chan->device->dev)
+	if (dws->dma_dev != chan->device->dev)
 		return false;
 
 	/* We have to copy data since dws can be temporary storage */
@@ -1165,6 +1153,14 @@ static int dwc_alloc_chan_resources(struct dma_chan *chan)
 	 * doesn't mean what you think it means), and status writeback.
 	 */
 
+	/*
+	 * We need controller-specific data to set up slave transfers.
+	 */
+	if (chan->private && !dw_dma_filter(chan, chan->private)) {
+		dev_warn(chan2dev(chan), "Wrong controller-specific data\n");
+		return -EINVAL;
+	}
+
 	/* Enable controller here if needed */
 	if (!dw->in_use)
 		dw_dma_on(dw);
@@ -1226,6 +1222,14 @@ static void dwc_free_chan_resources(struct dma_chan *chan)
 	spin_lock_irqsave(&dwc->lock, flags);
 	list_splice_init(&dwc->free_list, &list);
 	dwc->descs_allocated = 0;
+
+	/* Clear custom channel configuration */
+	dwc->src_id = 0;
+	dwc->dst_id = 0;
+
+	dwc->src_master = 0;
+	dwc->dst_master = 0;
+
 	dwc->initialized = false;
 
 	/* Disable interrupts */

drivers/dma/edma.c

@@ -1238,6 +1238,7 @@ static struct dma_async_tx_descriptor *edma_prep_dma_cyclic(
 	struct edma_desc *edesc;
 	dma_addr_t src_addr, dst_addr;
 	enum dma_slave_buswidth dev_width;
+	bool use_intermediate = false;
 	u32 burst;
 	int i, ret, nslots;
 
@@ -1279,8 +1280,21 @@ static struct dma_async_tx_descriptor *edma_prep_dma_cyclic(
 	 * but the synchronization is difficult to achieve with Cyclic and
 	 * cannot be guaranteed, so we error out early.
 	 */
-	if (nslots > MAX_NR_SG)
-		return NULL;
+	if (nslots > MAX_NR_SG) {
+		/*
+		 * If the burst and period sizes are the same, we can put
+		 * the full buffer into a single period and activate
+		 * intermediate interrupts. This will produce interrupts
+		 * after each burst, which is also after each desired period.
+		 */
+		if (burst == period_len) {
+			period_len = buf_len;
+			nslots = 2;
+			use_intermediate = true;
+		} else {
+			return NULL;
+		}
+	}
 
 	edesc = kzalloc(sizeof(*edesc) + nslots * sizeof(edesc->pset[0]),
 			GFP_ATOMIC);
@@ -1358,8 +1372,13 @@ static struct dma_async_tx_descriptor *edma_prep_dma_cyclic(
 		/*
 		 * Enable period interrupt only if it is requested
 		 */
-		if (tx_flags & DMA_PREP_INTERRUPT)
+		if (tx_flags & DMA_PREP_INTERRUPT) {
 			edesc->pset[i].param.opt |= TCINTEN;
+
+			/* Also enable intermediate interrupts if necessary */
+			if (use_intermediate)
+				edesc->pset[i].param.opt |= ITCINTEN;
+		}
 	}
 
 	/* Place the cyclic channel to highest priority queue */
@@ -1570,32 +1589,6 @@ static irqreturn_t dma_ccerr_handler(int irq, void *data)
 	return IRQ_HANDLED;
 }
 
-static void edma_tc_set_pm_state(struct edma_tc *tc, bool enable)
-{
-	struct platform_device *tc_pdev;
-	int ret;
-
-	if (!IS_ENABLED(CONFIG_OF) || !tc)
-		return;
-
-	tc_pdev = of_find_device_by_node(tc->node);
-	if (!tc_pdev) {
-		pr_err("%s: TPTC device is not found\n", __func__);
-		return;
-	}
-	if (!pm_runtime_enabled(&tc_pdev->dev))
-		pm_runtime_enable(&tc_pdev->dev);
-
-	if (enable)
-		ret = pm_runtime_get_sync(&tc_pdev->dev);
-	else
-		ret = pm_runtime_put_sync(&tc_pdev->dev);
-
-	if (ret < 0)
-		pr_err("%s: pm_runtime_%s_sync() failed for %s\n", __func__,
-		       enable ? "get" : "put", dev_name(&tc_pdev->dev));
-}
-
 /* Alloc channel resources */
 static int edma_alloc_chan_resources(struct dma_chan *chan)
 {
@@ -1632,8 +1625,6 @@ static int edma_alloc_chan_resources(struct dma_chan *chan)
 		EDMA_CHAN_SLOT(echan->ch_num), chan->chan_id,
 		echan->hw_triggered ? "HW" : "SW");
 
-	edma_tc_set_pm_state(echan->tc, true);
-
 	return 0;
 
 err_slot:
@@ -1670,7 +1661,6 @@ static void edma_free_chan_resources(struct dma_chan *chan)
 		echan->alloced = false;
 	}
 
-	edma_tc_set_pm_state(echan->tc, false);
 	echan->tc = NULL;
 	echan->hw_triggered = false;
 
@@ -2417,10 +2407,8 @@ static int edma_pm_suspend(struct device *dev)
 	int i;
 
 	for (i = 0; i < ecc->num_channels; i++) {
-		if (echan[i].alloced) {
+		if (echan[i].alloced)
 			edma_setup_interrupt(&echan[i], false);
-			edma_tc_set_pm_state(echan[i].tc, false);
-		}
 	}
 
 	return 0;
@@ -2450,8 +2438,6 @@ static int edma_pm_resume(struct device *dev)
 
 			/* Set up channel -> slot mapping for the entry slot */
 			edma_set_chmap(&echan[i], echan[i].slot[0]);
-
-			edma_tc_set_pm_state(echan[i].tc, true);
 		}
 	}
 
@@ -2475,7 +2461,8 @@ static struct platform_driver edma_driver = {
 
 static int edma_tptc_probe(struct platform_device *pdev)
 {
-	return 0;
+	pm_runtime_enable(&pdev->dev);
+	return pm_runtime_get_sync(&pdev->dev);
 }
 
 static struct platform_driver edma_tptc_driver = {

drivers/dma/hsu/hsu.c

@@ -64,10 +64,10 @@ static void hsu_dma_chan_start(struct hsu_dma_chan *hsuc)
 
 	if (hsuc->direction == DMA_MEM_TO_DEV) {
 		bsr = config->dst_maxburst;
-		mtsr = config->dst_addr_width;
+		mtsr = config->src_addr_width;
 	} else if (hsuc->direction == DMA_DEV_TO_MEM) {
 		bsr = config->src_maxburst;
-		mtsr = config->src_addr_width;
+		mtsr = config->dst_addr_width;
 	}
 
 	hsu_chan_disable(hsuc);
@@ -135,7 +135,7 @@ static u32 hsu_dma_chan_get_sr(struct hsu_dma_chan *hsuc)
 	sr = hsu_chan_readl(hsuc, HSU_CH_SR);
 	spin_unlock_irqrestore(&hsuc->vchan.lock, flags);
 
-	return sr;
+	return sr & ~(HSU_CH_SR_DESCE_ANY | HSU_CH_SR_CDESC_ANY);
 }
 
 irqreturn_t hsu_dma_irq(struct hsu_dma_chip *chip, unsigned short nr)
@@ -254,10 +254,13 @@ static void hsu_dma_issue_pending(struct dma_chan *chan)
 static size_t hsu_dma_active_desc_size(struct hsu_dma_chan *hsuc)
 {
 	struct hsu_dma_desc *desc = hsuc->desc;
-	size_t bytes = desc->length;
+	size_t bytes = 0;
 	int i;
 
-	i = desc->active % HSU_DMA_CHAN_NR_DESC;
+	for (i = desc->active; i < desc->nents; i++)
+		bytes += desc->sg[i].len;
+
+	i = HSU_DMA_CHAN_NR_DESC - 1;
 	do {
 		bytes += hsu_chan_readl(hsuc, HSU_CH_DxTSR(i));
 	} while (--i >= 0);

drivers/dma/hsu/hsu.h

@@ -41,6 +41,9 @@
 #define HSU_CH_SR_DESCTO(x)	BIT(8 + (x))
 #define HSU_CH_SR_DESCTO_ANY	(BIT(11) | BIT(10) | BIT(9) | BIT(8))
 #define HSU_CH_SR_CHE		BIT(15)
+#define HSU_CH_SR_DESCE(x)	BIT(16 + (x))
+#define HSU_CH_SR_DESCE_ANY	(BIT(19) | BIT(18) | BIT(17) | BIT(16))
+#define HSU_CH_SR_CDESC_ANY	(BIT(31) | BIT(30))
 
 /* Bits in HSU_CH_CR */
 #define HSU_CH_CR_CHA		BIT(0)

drivers/dma/omap-dma.c

@@ -48,6 +48,7 @@ struct omap_chan {
 	unsigned dma_sig;
 	bool cyclic;
 	bool paused;
+	bool running;
 
 	int dma_ch;
 	struct omap_desc *desc;
@@ -294,6 +295,8 @@ static void omap_dma_start(struct omap_chan *c, struct omap_desc *d)
 
 	/* Enable channel */
 	omap_dma_chan_write(c, CCR, d->ccr | CCR_ENABLE);
+
+	c->running = true;
 }
 
 static void omap_dma_stop(struct omap_chan *c)
@@ -355,6 +358,8 @@ static void omap_dma_stop(struct omap_chan *c)
 
 		omap_dma_chan_write(c, CLNK_CTRL, val);
 	}
+
+	c->running = false;
 }
 
 static void omap_dma_start_sg(struct omap_chan *c, struct omap_desc *d,
@@ -673,15 +678,20 @@ static enum dma_status omap_dma_tx_status(struct dma_chan *chan,
 	struct omap_chan *c = to_omap_dma_chan(chan);
 	struct virt_dma_desc *vd;
 	enum dma_status ret;
-	uint32_t ccr;
 	unsigned long flags;
 
-	ccr = omap_dma_chan_read(c, CCR);
-	/* The channel is no longer active, handle the completion right away */
-	if (!(ccr & CCR_ENABLE))
-		omap_dma_callback(c->dma_ch, 0, c);
-
 	ret = dma_cookie_status(chan, cookie, txstate);
+
+	if (!c->paused && c->running) {
+		uint32_t ccr = omap_dma_chan_read(c, CCR);
+		/*
+		 * The channel is no longer active, set the return value
+		 * accordingly
+		 */
+		if (!(ccr & CCR_ENABLE))
+			ret = DMA_COMPLETE;
+	}
+
 	if (ret == DMA_COMPLETE || !txstate)
 		return ret;
 
@@ -945,9 +955,7 @@ static struct dma_async_tx_descriptor *omap_dma_prep_dma_memcpy(
 	d->ccr = c->ccr;
 	d->ccr |= CCR_DST_AMODE_POSTINC | CCR_SRC_AMODE_POSTINC;
 
-	d->cicr = CICR_DROP_IE;
-	if (tx_flags & DMA_PREP_INTERRUPT)
-		d->cicr |= CICR_FRAME_IE;
+	d->cicr = CICR_DROP_IE | CICR_FRAME_IE;
 
 	d->csdp = data_type;
 

drivers/dma/xilinx/xilinx_vdma.c

@@ -1236,7 +1236,7 @@ static struct dma_chan *of_dma_xilinx_xlate(struct of_phandle_args *dma_spec,
 	struct xilinx_vdma_device *xdev = ofdma->of_dma_data;
 	int chan_id = dma_spec->args[0];
 
-	if (chan_id >= XILINX_VDMA_MAX_CHANS_PER_DEVICE)
+	if (chan_id >= XILINX_VDMA_MAX_CHANS_PER_DEVICE || !xdev->chan[chan_id])
 		return NULL;
 
 	return dma_get_slave_channel(&xdev->chan[chan_id]->common);

drivers/extcon/extcon-palmas.c

@@ -348,8 +348,7 @@ static int palmas_usb_probe(struct platform_device *pdev)
 						palmas_vbus_irq_handler,
 						IRQF_TRIGGER_FALLING |
 						IRQF_TRIGGER_RISING |
-						IRQF_ONESHOT |
-						IRQF_EARLY_RESUME,
+						IRQF_ONESHOT,
 						"palmas_usb_vbus",
 						palmas_usb);
 		if (status < 0) {

drivers/firmware/efi/arm-init.c

@@ -203,7 +203,19 @@ void __init efi_init(void)
 
 	reserve_regions();
 	early_memunmap(memmap.map, params.mmap_size);
-	memblock_mark_nomap(params.mmap & PAGE_MASK,
-			    PAGE_ALIGN(params.mmap_size +
-				       (params.mmap & ~PAGE_MASK)));
+
+	if (IS_ENABLED(CONFIG_ARM)) {
+		/*
+		 * ARM currently does not allow ioremap_cache() to be called on
+		 * memory regions that are covered by struct page. So remove the
+		 * UEFI memory map from the linear mapping.
+		 */
+		memblock_mark_nomap(params.mmap & PAGE_MASK,
+				    PAGE_ALIGN(params.mmap_size +
+					       (params.mmap & ~PAGE_MASK)));
+	} else {
+		memblock_reserve(params.mmap & PAGE_MASK,
+				 PAGE_ALIGN(params.mmap_size +
+					    (params.mmap & ~PAGE_MASK)));
+	}
 }

drivers/gpu/drm/amd/amdgpu/amdgpu.h

@@ -2034,6 +2034,7 @@ struct amdgpu_device {
 
 	/* tracking pinned memory */
 	u64 vram_pin_size;
+	u64 invisible_pin_size;
 	u64 gart_pin_size;
 
 	/* amdkfd interface */

drivers/gpu/drm/amd/amdgpu/amdgpu_kms.c

@@ -384,7 +384,7 @@ static int amdgpu_info_ioctl(struct drm_device *dev, void *data, struct drm_file
 		vram_gtt.vram_size = adev->mc.real_vram_size;
 		vram_gtt.vram_size -= adev->vram_pin_size;
 		vram_gtt.vram_cpu_accessible_size = adev->mc.visible_vram_size;
-		vram_gtt.vram_cpu_accessible_size -= adev->vram_pin_size;
+		vram_gtt.vram_cpu_accessible_size -= (adev->vram_pin_size - adev->invisible_pin_size);
 		vram_gtt.gtt_size  = adev->mc.gtt_size;
 		vram_gtt.gtt_size -= adev->gart_pin_size;
 		return copy_to_user(out, &vram_gtt,

drivers/gpu/drm/amd/amdgpu/amdgpu_object.c

@@ -424,9 +424,11 @@ int amdgpu_bo_pin_restricted(struct amdgpu_bo *bo, u32 domain,
 		bo->pin_count = 1;
 		if (gpu_addr != NULL)
 			*gpu_addr = amdgpu_bo_gpu_offset(bo);
-		if (domain == AMDGPU_GEM_DOMAIN_VRAM)
+		if (domain == AMDGPU_GEM_DOMAIN_VRAM) {
 			bo->adev->vram_pin_size += amdgpu_bo_size(bo);
-		else
+			if (bo->flags & AMDGPU_GEM_CREATE_NO_CPU_ACCESS)
+				bo->adev->invisible_pin_size += amdgpu_bo_size(bo);
+		} else
 			bo->adev->gart_pin_size += amdgpu_bo_size(bo);
 	} else {
 		dev_err(bo->adev->dev, "%p pin failed\n", bo);
@@ -456,9 +458,11 @@ int amdgpu_bo_unpin(struct amdgpu_bo *bo)
 	}
 	r = ttm_bo_validate(&bo->tbo, &bo->placement, false, false);
 	if (likely(r == 0)) {
-		if (bo->tbo.mem.mem_type == TTM_PL_VRAM)
+		if (bo->tbo.mem.mem_type == TTM_PL_VRAM) {
 			bo->adev->vram_pin_size -= amdgpu_bo_size(bo);
-		else
+			if (bo->flags & AMDGPU_GEM_CREATE_NO_CPU_ACCESS)
+				bo->adev->invisible_pin_size -= amdgpu_bo_size(bo);
+		} else
 			bo->adev->gart_pin_size -= amdgpu_bo_size(bo);
 	} else {
 		dev_err(bo->adev->dev, "%p validate failed for unpin\n", bo);

drivers/gpu/drm/amd/amdgpu/tonga_ih.c

@@ -307,7 +307,7 @@ static int tonga_ih_sw_fini(void *handle)
 
 	amdgpu_irq_fini(adev);
 	amdgpu_ih_ring_fini(adev);
-	amdgpu_irq_add_domain(adev);
+	amdgpu_irq_remove_domain(adev);
 
 	return 0;
 }

drivers/gpu/drm/drm_edid.c

@@ -205,7 +205,7 @@ static const struct drm_display_mode drm_dmt_modes[] = {
 		   DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_PVSYNC) },
 	/* 0x0f - 1024x768@43Hz, interlace */
 	{ DRM_MODE("1024x768i", DRM_MODE_TYPE_DRIVER, 44900, 1024, 1032,
-		   1208, 1264, 0, 768, 768, 772, 817, 0,
+		   1208, 1264, 0, 768, 768, 776, 817, 0,
 		   DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_PVSYNC |
 		   DRM_MODE_FLAG_INTERLACE) },
 	/* 0x10 - 1024x768@60Hz */
@@ -522,12 +522,12 @@ static const struct drm_display_mode edid_est_modes[] = {
 		   720, 840, 0, 480, 481, 484, 500, 0,
 		   DRM_MODE_FLAG_NHSYNC | DRM_MODE_FLAG_NVSYNC) }, /* 640x480@75Hz */
 	{ DRM_MODE("640x480", DRM_MODE_TYPE_DRIVER, 31500, 640, 664,
-		   704,  832, 0, 480, 489, 491, 520, 0,
+		   704,  832, 0, 480, 489, 492, 520, 0,
 		   DRM_MODE_FLAG_NHSYNC | DRM_MODE_FLAG_NVSYNC) }, /* 640x480@72Hz */
 	{ DRM_MODE("640x480", DRM_MODE_TYPE_DRIVER, 30240, 640, 704,
 		   768,  864, 0, 480, 483, 486, 525, 0,
 		   DRM_MODE_FLAG_NHSYNC | DRM_MODE_FLAG_NVSYNC) }, /* 640x480@67Hz */
-	{ DRM_MODE("640x480", DRM_MODE_TYPE_DRIVER, 25200, 640, 656,
+	{ DRM_MODE("640x480", DRM_MODE_TYPE_DRIVER, 25175, 640, 656,
 		   752, 800, 0, 480, 490, 492, 525, 0,
 		   DRM_MODE_FLAG_NHSYNC | DRM_MODE_FLAG_NVSYNC) }, /* 640x480@60Hz */
 	{ DRM_MODE("720x400", DRM_MODE_TYPE_DRIVER, 35500, 720, 738,
@@ -539,7 +539,7 @@ static const struct drm_display_mode edid_est_modes[] = {
 	{ DRM_MODE("1280x1024", DRM_MODE_TYPE_DRIVER, 135000, 1280, 1296,
 		   1440, 1688, 0, 1024, 1025, 1028, 1066, 0,
 		   DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_PVSYNC) }, /* 1280x1024@75Hz */
-	{ DRM_MODE("1024x768", DRM_MODE_TYPE_DRIVER, 78800, 1024, 1040,
+	{ DRM_MODE("1024x768", DRM_MODE_TYPE_DRIVER, 78750, 1024, 1040,
 		   1136, 1312, 0,  768, 769, 772, 800, 0,
 		   DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_PVSYNC) }, /* 1024x768@75Hz */
 	{ DRM_MODE("1024x768", DRM_MODE_TYPE_DRIVER, 75000, 1024, 1048,
@@ -2241,7 +2241,7 @@ drm_est3_modes(struct drm_connector *connector, struct detailed_timing *timing)
 {
 	int i, j, m, modes = 0;
 	struct drm_display_mode *mode;
-	u8 *est = ((u8 *)timing) + 5;
+	u8 *est = ((u8 *)timing) + 6;
 
 	for (i = 0; i < 6; i++) {
 		for (j = 7; j >= 0; j--) {

drivers/gpu/drm/exynos/Kconfig

@@ -94,7 +94,7 @@ comment "Sub-drivers"
 
 config DRM_EXYNOS_G2D
 	bool "G2D"
-	depends on !VIDEO_SAMSUNG_S5P_G2D
+	depends on VIDEO_SAMSUNG_S5P_G2D=n
 	select FRAME_VECTOR
 	help
 	  Choose this option if you want to use Exynos G2D for DRM.

drivers/gpu/drm/exynos/Makefile

@@ -2,10 +2,10 @@
 # Makefile for the drm device driver.  This driver provides support for the
 # Direct Rendering Infrastructure (DRI) in XFree86 4.1.0 and higher.
 
-exynosdrm-y := exynos_drm_drv.o exynos_drm_crtc.o exynos_drm_fbdev.o \
-		exynos_drm_fb.o exynos_drm_gem.o exynos_drm_core.o \
-		exynos_drm_plane.o
+exynosdrm-y := exynos_drm_drv.o exynos_drm_crtc.o exynos_drm_fb.o \
+		exynos_drm_gem.o exynos_drm_core.o exynos_drm_plane.o
 
+exynosdrm-$(CONFIG_DRM_FBDEV_EMULATION) += exynos_drm_fbdev.o
 exynosdrm-$(CONFIG_DRM_EXYNOS_IOMMU) += exynos_drm_iommu.o
 exynosdrm-$(CONFIG_DRM_EXYNOS_FIMD)	+= exynos_drm_fimd.o
 exynosdrm-$(CONFIG_DRM_EXYNOS5433_DECON)	+= exynos5433_drm_decon.o

drivers/gpu/drm/exynos/exynos_drm_core.c

@@ -101,7 +101,7 @@ int exynos_drm_subdrv_open(struct drm_device *dev, struct drm_file *file)
 	return 0;
 
 err:
-	list_for_each_entry_reverse(subdrv, &subdrv->list, list) {
+	list_for_each_entry_continue_reverse(subdrv, &exynos_drm_subdrv_list, list) {
 		if (subdrv->close)
 			subdrv->close(dev, subdrv->dev, file);
 	}

drivers/gpu/drm/exynos/exynos_drm_fb.c

@@ -199,17 +199,6 @@ dma_addr_t exynos_drm_fb_dma_addr(struct drm_framebuffer *fb, int index)
 	return exynos_fb->dma_addr[index];
 }
 
-static void exynos_drm_output_poll_changed(struct drm_device *dev)
-{
-	struct exynos_drm_private *private = dev->dev_private;
-	struct drm_fb_helper *fb_helper = private->fb_helper;
-
-	if (fb_helper)
-		drm_fb_helper_hotplug_event(fb_helper);
-	else
-		exynos_drm_fbdev_init(dev);
-}
-
 static const struct drm_mode_config_funcs exynos_drm_mode_config_funcs = {
 	.fb_create = exynos_user_fb_create,
 	.output_poll_changed = exynos_drm_output_poll_changed,

drivers/gpu/drm/exynos/exynos_drm_fbdev.c

@@ -317,3 +317,14 @@ void exynos_drm_fbdev_restore_mode(struct drm_device *dev)
 
 	drm_fb_helper_restore_fbdev_mode_unlocked(private->fb_helper);
 }
+
+void exynos_drm_output_poll_changed(struct drm_device *dev)
+{
+	struct exynos_drm_private *private = dev->dev_private;
+	struct drm_fb_helper *fb_helper = private->fb_helper;
+
+	if (fb_helper)
+		drm_fb_helper_hotplug_event(fb_helper);
+	else
+		exynos_drm_fbdev_init(dev);
+}

drivers/gpu/drm/exynos/exynos_drm_fbdev.h

@@ -15,9 +15,30 @@
 #ifndef _EXYNOS_DRM_FBDEV_H_
 #define _EXYNOS_DRM_FBDEV_H_
 
+#ifdef CONFIG_DRM_FBDEV_EMULATION
+
 int exynos_drm_fbdev_init(struct drm_device *dev);
-int exynos_drm_fbdev_reinit(struct drm_device *dev);
 void exynos_drm_fbdev_fini(struct drm_device *dev);
 void exynos_drm_fbdev_restore_mode(struct drm_device *dev);
+void exynos_drm_output_poll_changed(struct drm_device *dev);
+
+#else
+
+static inline int exynos_drm_fbdev_init(struct drm_device *dev)
+{
+	return 0;
+}
+
+static inline void exynos_drm_fbdev_fini(struct drm_device *dev)
+{
+}
+
+static inline void exynos_drm_fbdev_restore_mode(struct drm_device *dev)
+{
+}
+
+#define exynos_drm_output_poll_changed (NULL)
+
+#endif
 
 #endif

drivers/gpu/drm/exynos/exynos_drm_fimd.c

@@ -888,7 +888,7 @@ static void fimd_dp_clock_enable(struct exynos_drm_crtc *crtc, bool enable)
 	 * clock. On these SoCs the bootloader may enable it but any
 	 * power domain off/on will reset it to disable state.
 	 */
-	if (ctx->driver_data != &exynos5_fimd_driver_data ||
+	if (ctx->driver_data != &exynos5_fimd_driver_data &&
 	    ctx->driver_data != &exynos5420_fimd_driver_data)
 		return;
 

drivers/gpu/drm/exynos/exynos_drm_mic.c

@@ -129,7 +129,7 @@ static void mic_set_path(struct exynos_mic *mic, bool enable)
 	} else
 		val &= ~(MIC0_RGB_MUX | MIC0_I80_MUX | MIC0_ON_MUX);
 
-	regmap_write(mic->sysreg, DSD_CFG_MUX, val);
+	ret = regmap_write(mic->sysreg, DSD_CFG_MUX, val);
 	if (ret)
 		DRM_ERROR("mic: Failed to read system register\n");
 }
@@ -457,6 +457,7 @@ static int exynos_mic_probe(struct platform_device *pdev)
 							"samsung,disp-syscon");
 	if (IS_ERR(mic->sysreg)) {
 		DRM_ERROR("mic: Failed to get system register.\n");
+		ret = PTR_ERR(mic->sysreg);
 		goto err;
 	}
 

drivers/gpu/drm/exynos/exynos_drm_plane.c

@@ -11,9 +11,10 @@
 
 #include <drm/drmP.h>
 
-#include <drm/exynos_drm.h>
-#include <drm/drm_plane_helper.h>
+#include <drm/drm_atomic.h>
 #include <drm/drm_atomic_helper.h>
+#include <drm/drm_plane_helper.h>
+#include <drm/exynos_drm.h>
 #include "exynos_drm_drv.h"
 #include "exynos_drm_crtc.h"
 #include "exynos_drm_fb.h"
@@ -57,11 +58,12 @@ static int exynos_plane_get_size(int start, unsigned length, unsigned last)
 }
 
 static void exynos_plane_mode_set(struct exynos_drm_plane_state *exynos_state)
-
 {
 	struct drm_plane_state *state = &exynos_state->base;
-	struct drm_crtc *crtc = exynos_state->base.crtc;
-	struct drm_display_mode *mode = &crtc->state->adjusted_mode;
+	struct drm_crtc *crtc = state->crtc;
+	struct drm_crtc_state *crtc_state =
+			drm_atomic_get_existing_crtc_state(state->state, crtc);
+	struct drm_display_mode *mode = &crtc_state->adjusted_mode;
 	int crtc_x, crtc_y;
 	unsigned int crtc_w, crtc_h;
 	unsigned int src_x, src_y;

drivers/gpu/drm/i915/i915_drv.c

@@ -758,10 +758,10 @@ static int i915_drm_resume(struct drm_device *dev)
 		dev_priv->display.hpd_irq_setup(dev);
 	spin_unlock_irq(&dev_priv->irq_lock);
 
-	intel_display_resume(dev);
-
 	intel_dp_mst_resume(dev);
 
+	intel_display_resume(dev);
+
 	/*
 	 * ... but also need to make sure that hotplug processing
 	 * doesn't cause havoc. Like in the driver load code we don't