Input: synaptics-rmi4 - fix axis-swap behavior

The documentation for the touchscreen-swapped-x-y property states that
swapping is done after inverting if both are used. RMI4 did it the other
way around, leading to inconsistent behavior with regard to other
touchscreens.

Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Tested-by: Nick Dyer <nick@shmanahar.org>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

drivers/input/rmi4/rmi_2d_sensor.c

@@ -32,15 +32,15 @@ void rmi_2d_sensor_abs_process(struct rmi_2d_sensor *sensor,
 	if (obj->type == RMI_2D_OBJECT_NONE)
 		return;
 
-	if (axis_align->swap_axes)
-		swap(obj->x, obj->y);
-
 	if (axis_align->flip_x)
 		obj->x = sensor->max_x - obj->x;
 
 	if (axis_align->flip_y)
 		obj->y = sensor->max_y - obj->y;
 
+	if (axis_align->swap_axes)
+		swap(obj->x, obj->y);
+
 	/*
 	 * Here checking if X offset or y offset are specified is
 	 * redundant. We just add the offsets or clip the values.
@@ -120,15 +120,15 @@ void rmi_2d_sensor_rel_report(struct rmi_2d_sensor *sensor, int x, int y)
 	x = min(RMI_2D_REL_POS_MAX, max(RMI_2D_REL_POS_MIN, (int)x));
 	y = min(RMI_2D_REL_POS_MAX, max(RMI_2D_REL_POS_MIN, (int)y));
 
-	if (axis_align->swap_axes)
-		swap(x, y);
-
 	if (axis_align->flip_x)
 		x = min(RMI_2D_REL_POS_MAX, -x);
 
 	if (axis_align->flip_y)
 		y = min(RMI_2D_REL_POS_MAX, -y);
 
+	if (axis_align->swap_axes)
+		swap(x, y);
+
 	if (x || y) {
 		input_report_rel(sensor->input, REL_X, x);
 		input_report_rel(sensor->input, REL_Y, y);
@@ -141,17 +141,10 @@ static void rmi_2d_sensor_set_input_params(struct rmi_2d_sensor *sensor)
 	struct input_dev *input = sensor->input;
 	int res_x;
 	int res_y;
+	int max_x, max_y;
 	int input_flags = 0;
 
 	if (sensor->report_abs) {
-		if (sensor->axis_align.swap_axes) {
-			swap(sensor->max_x, sensor->max_y);
-			swap(sensor->axis_align.clip_x_low,
-			     sensor->axis_align.clip_y_low);
-			swap(sensor->axis_align.clip_x_high,
-			     sensor->axis_align.clip_y_high);
-		}
-
 		sensor->min_x = sensor->axis_align.clip_x_low;
 		if (sensor->axis_align.clip_x_high)
 			sensor->max_x = min(sensor->max_x,
@@ -163,14 +156,19 @@ static void rmi_2d_sensor_set_input_params(struct rmi_2d_sensor *sensor)
 				sensor->axis_align.clip_y_high);
 
 		set_bit(EV_ABS, input->evbit);
-		input_set_abs_params(input, ABS_MT_POSITION_X, 0, sensor->max_x,
-					0, 0);
-		input_set_abs_params(input, ABS_MT_POSITION_Y, 0, sensor->max_y,
-					0, 0);
+
+		max_x = sensor->max_x;
+		max_y = sensor->max_y;
+		if (sensor->axis_align.swap_axes)
+			swap(max_x, max_y);
+		input_set_abs_params(input, ABS_MT_POSITION_X, 0, max_x, 0, 0);
+		input_set_abs_params(input, ABS_MT_POSITION_Y, 0, max_y, 0, 0);
 
 		if (sensor->x_mm && sensor->y_mm) {
 			res_x = (sensor->max_x - sensor->min_x) / sensor->x_mm;
 			res_y = (sensor->max_y - sensor->min_y) / sensor->y_mm;
+			if (sensor->axis_align.swap_axes)
+				swap(res_x, res_y);
 
 			input_abs_set_res(input, ABS_X, res_x);
 			input_abs_set_res(input, ABS_Y, res_y);